Job Search Results

653 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 02:18PM Pacific Time by ContractJobHunter. )

Listings 1 - 653

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Design Engineer

Description:
Aircraft Interiors Designers Needed. Catia v5
Location: Mojave, CA
Duration: 12+ months
Rate: $55-65/hr
Good overtime potential

MUST BE US PERSONS.

Aircraft Interiors Design Engineer

We are looking for senior level interior design engineers with experience doing conceptual design and preliminary design phase, initial sizing for developing head liners, trade studies, strong with Catia V5, have some background in mechanisms and moving parts, involved in engineering requirements definition and can mentor younger engineers.
BSME/BSAE is preferable, but not required.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $55-65/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Air Systems ECS

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with Avionics systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Experience in as many of the following as possible:
o Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
5+ years relevant work experience related to avionics systems integration and certification.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Avionics Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.
The individuals in this role will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
The ideal candidate will possess aircraft certification experience with a specialty in electrical systems and 5 years of relevant work experience related to avionics systems integration and certification.

Responsibilities of the Aerospace Avionics Engineers

● Coordinate system test and certification requirements.
● Support flight test and ground test activities.
● Analyze test data and evaluate system operation.
● Prepare test reports.
● Domestic and occasional international travel is required.

Requirements of the Aerospace Avionics Engineers

● Experience in Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
● 5+ years relevant work experience related to avionics systems integration and certification.
● Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
● Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: LT
Start Date: open
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:
� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors
Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Cab/Fl
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: open
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Essential Functions:
Coordation experience with a specialty in electrical systems.inate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elect/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with electrical systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: LA
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are seeking Electrical engineers with systems experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.

Essential Functions:
� Aerospace Electrical Engineer shall coordinate system test and certification requirements.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.

Desired Qualifications:
� Electrical Engineer will have a deep understanding of power distribution system, failure cases, load shedding, electrical power management
� Understanding of EWIS and wiring a plus
� 5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elec/Orl
Job Location: Orlando, FL
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Project Engineer

Description:
Aerospace Project Engineer

Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

Seeking a Project Engineers with Flight Test experience to join the team in Seattle, WA. The ideal candidate will possess 4+ years of experience in one of the following disciplines.
Flight Test Management Software
Flight Test Trouble Shooting Processes
Flight Test Equipment Management / Coordination
Aerospace Project Engineering
Bachelor�s Degree in Software Engineering, Aerospace Engineering, Mechanical Engineering, Project Management or a related subject (or equivalent combination of work and experience).
Four or more years of aerospace and/or project management experience. Flight Test environment preferred, but not required.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: Split possible
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Program Engineers II / III / IV (CA)

Description:
Applicant will perform Maintenance Steering Group-3 (MSG-3) analysis on Lightning/High Intensity Radiated Fields (LHIRF) Significant Items (LHSIs) to identify scheduled maintenance required to maintain LHIRF protection features for continued airworthiness. Applicant will compile analysis results and present to the customer working group (Airlines and Regulatory) for approval. Applicant should have good working knowledge and experience with electrical component design/installations, engineering drawings/schematics and component specifications. Applicant needs to be detail oriented with excellent research skills. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: MaintEngCA
Job Location: Seal Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Engineers - Purchase, NY

Description:
STS AeroStaff Services is currently hiring Aircraft Structures Engineers for open positions in Purchase, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Structures Engineer reports to the Structures Engineer Manager, and is responsible for the technical accuracy and reliability of aircraft. Additional responsibilities include the Boeing 747 aircraft systems technical accuracy and reliability.

Job Duties:

• Provide budgetary data on projects and issues as directed.
• Report on the status of projects and issues as directed.
• Issue instructions and documents to economically support operations and return aircraft to service in a safe, airworthy, and timely manner.
• Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for repairs, alterations, and modifications.
• Update technical source documents as applicable to insure accuracy.
• Support integration of new and previously operated aircraft.
• Liaise with manufacturers; maintenance representatives, repair & overhaul (MRO) facilities; outside engineering departments; regulatory personnel; and other outside agencies.
• Evaluate Federal Aviation Regulations (FARs), Notices of Proposed Rulemaking (NPRMs), Airworthiness Directives (ADs), Service Bulletins (SBs), Service Letters (SLs), and other notifications of in-service issues.
• Develop product improvement modifications as directed by Reliability Indicators.
• Work with original equipment manufacturers on emerging issues to help ensure safety and airworthiness, but also minimize the economic impact.
• Organize, develop and provide all necessary Structures Engineering documentation required to complete aircraft Systems modifications and repairs within the allocated time schedule and budget allowance.
• Establish component repair and build specifications to enhance dispatch reliability in accordance with budgetary and regulatory requirements.
• Provide technical support to Technical Operations, Ground Operations, Flight Operations, and other Worldwide Holdings personnel.
• Coordinate with other Engineering staff to provide 24/7 technical support.
• Review systems portion of the Aircraft Maintenance and Inspection Program, and initiate maintenance program changes and changes to maintenance documents.

Qualifications:

• 10 years Aircraft Structures Engineering.
• 5-7 years in applied engineering setting.
• B.S. Engineering/Technical Engineering Degree (ME or AE) or equivalent experience.
• Meets deadlines, daily attendance & punctuality standard.
• Remembers & follows instructions, Work is thorough, Alertness, Commitment to task, Perceptivity, Produces accurate, dependable work, Output is consistent, Complete attention to detail.
• Volume of work produced meets expectations.
• Experience with Microsoft Word, Excel.
• Familiarity with aircraft and engine system components.
• Strong technical skills and knowledge of large aircraft system design.
• Ability to identify cost effective engineering solutions.
• Excellent communication skills.
• Ability to interface with manufacturers and regulatory agencies.
• Some financial analysis skills required.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37297
Job Location: Purchase, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
Aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s is seeking multiple Aircraft Systems Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking a contract or fulltime engineers to join the team. At least five years� experience with one or more of the following: Electrical, Avionics, Flight Controls, ECS, Protective Systems (Anti Ice, Fire Protection), and Hydro Mechanical Systems (Landing Gear, Hydraulics). The ideal candidate will possess relevant aircraft systems integration and certification experience.
� Electrical
� Avionics
� Flight Controls
� Air Systems (ECS)
� Protective Systems (Anti Ice, Firex)
� Landing Gear
� Hydraulics

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone Lead Coordinator

Description:
Airframe Systems Integration Zone Lead Coordinator/TSII
Savannah, GA
Rate: $65-$70

Unique Skills:

The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions: 1. Manages Installation Design of primary aircraft barrel assemblies. 2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules. 3. Manages the coordination and development of parts, planning, tooling & purchase orders. 4. Has oversight over the release of engineering documentation. 5. Responsible for interface definition & configuration control of a specific aircraft barrel section. 6. Reviews engineering and manufacturing release criteria. 7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements. 2. Experience in communicating with employees/teams in productive and efficient manner. 3. Ability to work independently and cross-functionally. 4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams. 5. Ensures designs meet customer criteria, quality standards and FAA requirements 6. Knowledge of industry design and documentation standards. 7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must. 8. Experience with mechanical assemblies and manufacturing technique design. 9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. 10. Performs other duties as assigned 11. CATIA Knowledgeware and SmarTeam experience desirable.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6813
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Airworthiness Inspector Sr.


Location: Savannah, GA
Rate: $35.75/HR
Long Term contract


Unique Skills:
Must be able to support AAP on all shifts 24 /7


Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6894
Job Location: Savannah, GA
Rate: $35.75/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cherise Harris
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics-Electrical Systems Flight Test Engineer

Description:
UNIQUE SKILLS
Experience either conducting or functioning as an on board flight analyst during experimental fixed wing aircraft flight testing in the field of avionics and electrical systems. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 16-528-64401
Job Location: Southeast
Rate: $60.00 to $80.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Systems Flight Test Engineer

Description:
Avionics/Electrical Systems Flight Test Engineer

Location: Savannah, GA
Rate: $60.00 - $80.00/HR
Long Term contract


Unique Skills:
- Experience either conducting or functioning as an on board flight analyst during experimental fixed wing aircraft flight testing in the field of avionics and electrical systems.
- Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
- Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 5792
Job Location: Savannah, GA
Rate: $60-$80
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Process Analysts - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Business Process Analysts for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Business Process Analyst enables problem solving and data driven decisions for the program office and program management team by developing and maintaining metrics, reporting tools, and integrating data across a variety of business systems. These business systems include but are not limited to SAP, Team Center, SharePoint, and individual files in MS Office formats.

Job Duties:

• Collects and interrogates aircraft, project, and part status data from a variety of sources
• Provides metrics and reports in support of the program management team on one-time and recurring needs.
• Develops ad-hoc reporting solutions in MS Excel, MS Access, Business Intelligence (SAP), and MS SharePoint.
• Develops methods to automate and integrate reporting templates to improve consistency while reducing the time to execute on a daily, weekly, or monthly basis.
• Defines requirements, validate, and support implementation of related IT projects for the project office.
• Interacts with several organizations such as Supply Chain, IT, Operations, and Engineering to fully understand and access data.

Qualifications:

• Bachelor’s Degree (BA/BS) from four-year college or university required.
• 2+ years’ experience in developing and maintaining business systems data in a manufacturing environment.

Requirements:

• Strong oral and written communication skills.
• Excellent collaboration and interpersonal skills, with a demonstrated ability to successfully work cross-functionally and with all levels within the business.
• Competent SAP user familiar with common MRP and supply chain functions.
• Proficient in MS Office Suite (Excel, Word, PowerPoint, Project, Access).
• Experience in developing macros in MS Excel using MS Visual Basic.
• Experience building SQL queries to parse and reformat large data sets.
• Able to create and edit Business Intelligence Reports.
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37323
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C5 Flight Engineer

Description:
FLIGHT ENGINEER position on company aircraft. Flies and supports developmental, engineering and production flight tests to determine compliance with specification and operational suitability. Acts as instructor aircrew for training of aircrew during syllabus training flights and may conduct classroom training of customer aircrew. Provides support to demonstration flights with customers,government officials, or other personnel aboard to exhibit aircraft systems performance and capabilities. Provides aircrew input and support to developmental and engineering teams, training, customer support and marketing teams regarding aircrew interfaces. Provides engineering and pilot input to training, customer support and marketing teams
 
Job Number: DW - 0348
Job Location: Marrieta, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: David Wilkinson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Configuration Engineer

Description:
Cabin Configuration Engineer - Technical Specialist I

Location: Savannah, GA
Pay Rate: $52/hr - $57/hr
Duration: Long Term Contract
Shift: 4x10

Unique Skills:
-Candidates must be dedicated to cycle-time reduction, achieving a high level of accuracy in their work, and exceeding customer expectations.
-The ideal candidate will possess a working knowledge of aerospace engineering with emphasis on cabin assemblies and installations.
-Must be computer proficient to include Microsoft Suite, SmarTeam, ERP, and various MES platforms.
-Candidates should be familiar with Company aircraft models, terminology, and systems.
-Previous product design experience is highly desired. An understanding of FAA certification requirements, manufacturing processes, product configuration management, and service and support business processes and procedures is also desirable.
-Other key attributes for this position include strong organizational skills, ability to collaborate with others, an acute attention to detail, and proven problem solving capabilities.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6916
Job Location: Savannah, GA
Rate: 52-57
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Interiors Design Engineer

Description:
Unique Skills:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Mount Configuration Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.
 
Job Number: 24-134
Job Location: Savannah, GA
Rate: $55-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Joe
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract Cabin Safety engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:

� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Cabin Safety Engineer shall have experience with flammability, emergency lighting, slides, crash testing, etc.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: CS/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Systems, Electrical Engineer

Description:
Unique Skills:
  • Experience in Engineering design of Electrical Systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems.
  • Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings, test plans, and reports
  • AutoCAD, CATIA V5 and SmarTeam experience preferred

    Education and Experience Requirements:
  • Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
  • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
  • Job Number: 24-153
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Joe
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Checker

    Description:
  • Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam.
  • Experience in engineering of aircraft interior components and installations is preferred
     
  • Job Number: 24-151
    Job Location: Savannah, GA
    Rate: $50 to $55/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineer

    Description:
    Completions Electrical Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    Seeking candidate with:

    -Experience in Engineering design of Electrical Systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems.

    -Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings, test plans, reports, and completing supporting analysis/calculations (e.g. voltage drop)

    -AutoCAD, CATIA V5 and SmarTeam experience preferred
     
    Job Number: 6902
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineering

    Description:
    Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam. Experience in engineering of aircraft interior components and installations is preferred
     
    Job Number: Completions Electrical Engineering
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: Yes
    Overtime: yes
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineering Checker

    Description:
    Completions Electrical Engineering Checker

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Long Term contract


    Unique Skills:
    - Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam.
    - Experience in engineering of aircraft interior components and installations is preferred
     
    Job Number: 6897
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison

    Description:
    Unique Skills:

    Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings. Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
    Job Number: Completions Electrical Liaison
    Job Location: Savannah, GA
    Rate: 58-63
    Per Diem: Yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison Engineer

    Description:
  • Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings.
  • Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
  • Job Number: 24-152
    Job Location: Savannah, GA
    Rate: $58 to $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 plus years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison Engineering Consultant

    Description:
    Completions Electrical Liaison Engineering Consultant

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings.
    - Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
    Job Number: 6901
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineer

    Description:
    Completions Mechanical Engineer Tech Spec II

    Location: Savannah, GA
    Rate: $62.00/hr - $67.00/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required.
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc).

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6795
    Job Location: Savannah, GA
    Rate: 62.00-67.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineering Consultant

    Description:
    Unique Skills:

    -CATIA V5 and SmarTeam experience required -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
     
    Job Number: CompMech
    Job Location: Savannah, GA
    Rate: 58-63
    Per Diem: Yes
    Overtime: yes
    Duration: 1 year minimum
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineering Consultant

    Description:
    Completions Mechanical Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
     
    Job Number: 6898
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical/Liaison Engineering Consultant

    Description:
    Completions Mechanical/Liaison Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
    -Experience in Aircraft Production cabin installation liaison duties
    -Able to track engineering change and also provide sound technical advice to engineering design teams during aircraft cabin installations.
     
    Job Number: 6899
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Calibration Technicians

    Description:
    JSG is looking for a Component Calibration Lab Technician - First Shift and Second Shift for a 12+ month contract opportunity in Stratford, CT!

    Duties:
    Mechanical Component Calibration / Ground Test Instrumentation lab technician capable of working from Engineering drawings with limited guidance to fabricate, install, diagnose and repair hydraulic, mechanical and data systems associated with component calibration fixtures and facilities required to support ongoing Engineering Ground and Flight Test Development programs.
    The calibration of Flight aircraft and Ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
    Must be able to work at heights.
     
    Job Number: 353387
    Job Location: Stratford, Ct.
    Rate: open
    Per Diem: Yes-If qualified
    Overtime: Possible
    Duration: 12 month +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Aircraft Structural Design Engineer

    Description:
    Composite Aircraft Structural Design Engineer needed with experience with Catia v5 CPD composite workbench.
    Looking for self-starters who are problem solvers.
    MUST BE US PERSONS

    -Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
    -Create 3D/2D definition of parts, assemblies and installations.
    -CATIA V5, Composites workbench is a must.
    -Establish manufacturing tolerances for production of structural components using GD&T.
    -Participate in the Engineering definition review, approval and release process
    -Support the review of manufacturing plans and procedures to ensure compliance with design requirements
    -Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

    The Structures Company is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: $55-65/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration/Data Management Analyst I

    Description:
    UNIQUE SKILLS
    Need to have the ability to work on their own and be a self-started. Must have very good communication skills, written and verbal, also very strong computer skills is a must. Avionics experience is a plus, but not required.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in aerospace, engineering, business administration, or a related curriculum; or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. The Commercial and Government CDMA positions require a minimum of three (3) years of either Government or Commercial A/C configuration and data management experience.

    POSITION PURPOSE
    Note - This position description addresses two separate Configuration Data Management Analyst roles - commercial or government. Some duties, responsibilities, and requirements are identical - others are different. The differences are defined by using either the term commercial or government for the affected duties, responsibilities and requirements. Under supervision, analyzes and manages configuration/data requirements contained in Government RFPs and contracts or in Commercial documents or Data Sources, such as A/C Product Specifications, Computerized Maintenance Program (CMP) data, FAA Airworthiness Directives (ADs), Gulfstream Customer Bulletins (CBs), Gulfstream Aircraft Service Changes (ASCs), Gulfstream Service Bulletins (SBs, Gulfstream Maintenance and Operations Letters (MOLs), Supplier Data (Service Bulletins, Service Letters or other supplier Service Literature) and any other assigned documents. Interfaces closely with customers, suppliers, and internal functions regarding those requirements.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Supports the development of Commercial A/C Product Specifications and EIS Newsletters or Government aircraft configuration status accounting reports by researching Product Change Management Team (PCMT) data, aircraft CMP records and other data sources to ensure accurate data is contained in the Commercial or Government reports that are provided to the customer.
    2. Creates, maintains, and operates databases containing configuration and aircraft maintenance status in accordance with Government contract or Commercial requirements.
    3. Works closely with customers, suppliers and internal departments regarding the configuration/data requirements of the Government contracts or Commercial requirements.
    4. Supports formal Government A/C configuration audits (functional and physical).
    5. Participates in Government and/or Commercial Program PMRs, TIMs, Design Reviews, etc. providing configuration/data expertise.

    ADDITIONAL FUNCTIONS
    1. Maintains a thorough understanding of technical data (e.g. Gulfstream Technical and Operating manuals, Federal Acquisition Regulations (FAR, etc.) applicable to specific Commercial requirements or Government contracts.
    2. Performs other duties as required.

    OTHER REQUIREMENTS
    1. For the Government CDMA position, must have knowledge of Government contracting procedures.
    2. Ability to operate personal computer.
     
    Job Number: 16-640-81601
    Job Location: Southeast
    Rate: $30.00 to $40.00/Per Hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration/Data Management Analyst I

    Description:
    Configuration / Data Management Analyst I

    Location: Savannah, GA
    Pay Rate: $30.00/hr - $40.00/hr
    Long Term Contract
    Shift: First

    Unique Skills:
    Need to have the ability to work on their own and be a self started. Must have very good communication skills, written and verbal, also very strong computer skills is a must. Avionics experience is a plus, but not required.

    Education and Experience Requirements:
    Bachelors degree in aerospace, engineering, business administration, or a related curriculum; or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. The Commercial and Government CDMA positions require a minimum of three (3) years of either Government or Commercial A/C configuration and data management experience.

    Position Purpose:
    Note - This position description addresses two separate Configuration Data Management Analyst roles - commercial or government. Some duties, responsibilities, and requirements are identical - others are different. The differences are defined by using either the term commercial or government for the affected duties, responsibilities and requirements. Under supervision, analyzes and manages configuration/data requirements contained in Government RFPs and contracts or in Commercial documents or Data Sources, such as A/C Product Specifications, Computerized Maintenance Program (CMP) data, FAA Airworthiness Directives (ADs), Company Customer Bulletins (CBs), Company Aircraft Service Changes (ASCs), Company Service Bulletins (SBs, Company Maintenance and Operations Letters (MOLs), Supplier Data (Service Bulletins, Service Letters or other supplier Service Literature) and any other assigned documents. Interfaces closely with customers, suppliers, and internal functions regarding those requirements.

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Supports the development of Commercial A/C Product Specifications and EIS Newsletters or Government aircraft configuration status accounting reports by researching Product Change Management Team (PCMT) data, aircraft CMP records and other data sources to ensure accurate data is contained in the Commercial or Government reports that are provided to the customer.
    2. Creates, maintains, and operates databases containing configuration and aircraft maintenance status in accordance with Government contract or Commercial requirements.
    3. Works closely with customers, suppliers and internal departments regarding the configuration/data requirements of the Government contracts or Commercial requirements.
    4. Supports formal Government A/C configuration audits (functional and physical).
    5. Participates in Government and/or Commercial Program PMRs, TIMs, Design Reviews, etc. providing configuration/data expertise.

    Additional Functions:
    1. Maintains a thorough understanding of technical data (e.g. Company Technical and Operating manuals, Federal Acquisition Regulations (FAR, etc.) applicable to specific Commercial requirements or Government contracts.
    2. Performs other duties as required.

    Other Requirements:
    1. For the Government CDMA position, must have knowledge of Government contracting procedures.
    2. Ability to operate personal computer.
     
    Job Number: 6677
    Job Location: Savannah, GA
    Rate: 30.00 - 40.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cybersecurity Architect - RM

    Description:
    The Cybersecurity Architect performs cybersecurity engineering and certification & accreditation support activities for our DoD customers. The contractor will be located in Stratford, CT. This is a 2 year contract.

    Major responsibilities include
    1. Application of the Risk Management Framework (RMF) for aircraft training systems such as motion-based flight trainers, and aircraft maintenance trainers.
    2. Providing cybersecurity engineering expertise in support of UCDSMO accreditation for cross domain solutions.

    Major tasks include:

    Providing technical support to the design teams to ensure the security controls are implemented properly and will meet the requirements of the security controls baseline;

    Developing security assessment plans;

    Conducting security controls assessments;

    Developing and maintaining the artifacts required to support certification and accreditation;

    Leading the ST&E effort for the cross domain solution;

    Reviewing and providing comments on design specifications and RMF deliverables; and

    Resolving security controls implementation issues with customers and/or vendors


    Certification

    Contractor must have a DoD IA 8570 Level II certification, at a minimum.

    Experience

    Ideal candidate will have previous experience with UCDSMO certification and accreditation.

    Experience implementing DISA STIGS is preferred.

    Must be an organized self-starter, detail-oriented, and capable of working in a fast-paced environment with little direct supervision.
     
    Job Number: 352688
    Job Location: Stratford, CT
    Rate: Open
    Per Diem: Yes
    Overtime: Yes
    Duration: 2 years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity

    Description:
    Looking for an applicant with a Bachelor's degree and at least 5 years in the following: Check 3D engineering data for conformance to Gulfstream requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding GAC drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems. • Ensures designs meet customer criteria, quality standards and FAA requirements. • Adheres to budget and project schedules. • Provides design guidance and feedback to other engineering personnel. • Other duties as assigned. • Knowledge of industry design and documentation standards. • Experience with mechanical assemblies and manufacturing technique design. • Ability to work independently and cross-functionally. • Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
    PLease check out all of our openings at
    www.hi-tecsolutions.com/jobs
     
    Job Number: 89201
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    2886 SANDY PLAINS RD

    City, State: MARIETTA, GA 30066
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity Engineer (TSI)

    Description:
    Data Integrity Engineer (TSI)

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Long Term contract


    Unique Skills:
    - Check 3D engineering data for conformance to company requirements as directed.
    - Check parts for fit, form and function to the extent that information is available.
    - Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.
    - Checkers are responsible for determining the acceptability of data in the following areas:
    • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
    • Proper application and compliance with all Engineering and customer drawing requirements.
    • Use and understanding of GD & T a must.
    • Dimensioning and tolerancing including familiarity with ASME Y14.5.
    • Application of best drafting and design practices and procedures.
    • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    • Advise Design personnel regarding company drawing and design practices and procedures.
    • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
    • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
    • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
    • Knowledge of company parts list & PdocM, a plus.

    Essential Duties and Responsibilities
    • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
    • Ensures designs meet customer criteria, quality standards and FAA requirements.
    • Adheres to budget and project schedules.
    • Provides design guidance and feedback to other engineering personnel.
    • Other duties as assigned.
    • Knowledge of industry design and documentation standards.
    • Experience with mechanical assemblies and manufacturing technique design.
    • Ability to work independently and cross-functionally.
    • Experience in communicating with employees/teams in productive and efficient manner.
    • Strong communication and problem-solving skills.


    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6945
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer (Catia V5)

    Description:
    Any familiarity with structure of C130 aircraft, specifically C130J
    Air Force customer experience
    Experience or familiarity with engineering change documentation
    Experience with Teamcenter PLM software
    Active DoD secret clearance
     
    Job Location: KY
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6mos +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PANTHER GROUP
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer / NX 10 CA

    Description:
    Job Title: Design Engineer
    Job Number: 157682/4391
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract

    Description:

    • Contribute to the development of new product requirements through consulting with customers and sales personnel.
    • Validate conceptual problem solutions by performing trade studies and analyses.
    • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
    • Operate as a key element in a team of creative, independent individuals.
    • Represent Moog in a manner consistent with its technical reputation.
    • Create reliable designs through a comprehensive experimental development test program.
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 5-8 years of design and development engineering experience
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Excellent customer relations skills
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Team orientation and desire to participate in and contribute to a high functioning team
    Scope: Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.
     
    Job Number: MB-4391
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineers with Flight Controls Experience

    Description:
    Perform design of aircraft flight controls systems.
    MUST HAVE flight controls experience from a General Aviation OEM:
    Cirrus Aircraft
    Textron (Cessna/Hawker)
    Piper
    AND the following would work too:
    Gulfstream
    Bombardier/Lear
    Embraer

    MUST BE US PERSONS
    Create 3D/2D definition.
    CATIA V5 is a MUST.
    Participate in the Engineering definition review, approval and release process
    Support the review of manufacturing plans and procedures to ensure compliance with design requirements
    Support the creation of test plans which will be used to verify manufacturing processes meet design intent and requirements.

    Looking for self-starters who are problem solvers. Need guys who do not rely on internal processes and hand-holding. Must ask questions and work with peers to figure out problems.

    MUST BE US PERSONS

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: up to $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Systems Integration Zone

    Description:
    Airframe Systems Integration Zone

    Location: Savannah, GA
    Duration: Long Term Contract
    Pay Rate: $60/hr - $65/hr
    Shift: First

    Position Purpose:
    The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

    Essential Functions:
    1. Manages Installation Design of primary aircraft barrel assemblies.
    2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
    3. Manages the coordination and development of parts, planning, tooling & purchase orders.
    4. Has oversight over the release of engineering documentation.
    5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
    6. Reviews engineering and manufacturing release criteria.
    7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Experience in communicating with employees/teams in productive and efficient manner.
    3. Ability to work independently and cross-functionally.
    4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
    5. Ensures designs meet customer criteria, quality standards and FAA requirements
    6. Knowledge of industry design and documentation standards.
    7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
    8. Experience with mechanical assemblies and manufacturing technique design.
    9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    10. Performs other duties as assigned
    11. CATIA Knowledgeware and SmarTeam experience desirable.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 6814
    Job Location: Savannah, GA
    Rate: 60-65
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Support and Training Instructor

    Description:
    Design Support and Training - Instructor - Tech Spec II
    Savannah, GA
    Rate:$60-$62

    Unique Skills:

    CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6620
    Job Location: Savannah, GA
    Rate: $60-$62
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Door Design Engineers

    Description:
    General Summary:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.
    *Generates Engineering Models and Drawings utilizing CATIA Version 5.
    *Utilizes drafting and Geometrical Dimensioning & tolerance knowledge to optimize part design for cost and functionality.
    Searches for problem root cause and develop corrective action plans and solutions
     
    Job Number: Doors-Honda
    Job Location: Greensboro, NC
    Rate: $55.00-$65.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Doors Design Engineer

    Description:
    General Summary:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    External Loads Engineer - Dynamics

    Description:
    External Loads Engineer - Dynamics

    Location: Savannah, GA
    Rate: $70.00 - $77.00/HR
    Long Term contract


    Unique Skills:
    - Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
    - As an Engineering Consultant in Flutter & Dynamic Loads, you will:
    • Provide solutions for aircraft flutter and vibration problems
    • Analyze aircraft structural dynamic response and load distributions for gust, landing, taxi, and crash landing conditions
    • Analyze aircraft for flutter and determine flutter margins.

    - What you'll bring to the team:
    • Knowledge of aircraft aeroelasticity principles and concepts
    • Good general knowledge of FAR/EASA Part 25 requirements
    • Experience in structural dynamics modeling desired including static to dynamic model conversion
    • Experience with MSC Nastran and Patran or a comparable application
    • Experience with ground tests such as ground vibration tests or landing gear drop tests
    • Experience with flutter flight testing
    • Experience with dynamic analyses such as aircraft crash landing or engine fan blade out is a plus
    • Experience with aeroservoelasticity is a plus

    - What the Loads & Dynamics team does:
    • Creating and delivering a world class aviation experience
    • Contributing to the certification of world class business jet aircraft

    Job description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 5939
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Application Engineer

    Description:
    Electrical Applications Engineer
    Applicant shall: Maintain Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components, such as: connectors, back shells and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Education/Experience: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting products and services. Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Application Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Applicant shall:
    - Develop and maintain Electrical Wiring Interconnect System (EWIS).
    - Specific knowledge of qualified electrical component selection, such as: connectors, backshells and other EWIS components based on system and environmental requirements are required.
    - Must be capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements.
    - Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

    Education/Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services.

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6803
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Applications Engineer
    Savannah, GA
    Rate: $52-$57

    Unique Skills:

    Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6787
    Job Location: Savannah, GA
    Rate: $52-$57
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Applications Engineer
    Savannah, GA
    Rate: $58-$63

    Electrical Applications Engineering Consultant

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term Contract
    1st Shift

    Unique Skills:

    Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

    Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 5885
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Unique Skills:
    Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Satellite Communications - Water System - Waste System - EWIS experience required - 3D Wire Routing - Electrical Checking (Engineering Quality)Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - TSI

    Description:
    Electrical Engineer - TSI

    Savannah, GA
    Rate: $52-$57
    Long Term contract

    Unique Skills:
    - Candidate shall have experience in one or more of the following: Systems engineering, Analog design, Simulation system hardware design, Data acquisition system design, Instrumentation, Sensor signal I/O card interface, Process measurement and control, Automation Test, Aircraft systems design

    - Candidate must have experience with analog & digital circuit design and analysis - Prefer design experience with a variety of aircraft systems. - Experience with Mentor Graphics CHS / Capital Logic a plus


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 5987
    Job Location: Savannah, GA
    Rate: $52-$57/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer II

    Description:
    Electrical Engineer II
    Unique Skills:

    - Required - Candidate must have circuit design and analysis skills. - Design experience with analog and digital I/O interfaces. - Prefer experience with a variety of aircraft systems. - Prefer experience with Mentor Graphics CHS / Capital Logic.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:

    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 6477
    Job Location: Savannah, GA
    Rate: $50
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    UNIQUE SKILLS
    Required Applicant shall: Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches. Capable of interfacing with wiring diagrams, system and EMI/EMC requirements. Job Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-633-80162
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Required Applicant shall:
    - Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
    - Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6522
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer


    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract
    1st Shift


    Unique Skills:
    Required Applicant shall:
    - Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
    - Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6794
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer
    Savannah, GA
    Rate: $58-$63

    Unique Skills:

    Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6106
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Fabricators / EMI Harness Technicians

    Description:
    1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    - Experience with electrical and electronic fabrication.
    - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    - Experience with all the tooling and dies required to terminate mil-spec wires
    - Experience terminating EMI harness assemblies
    - Experience fabricating wire harnesses
    - Experience fabricating test sets
    - Experience using hand tools, mechanical and electrical
    - Experience with schematics and electrical diagrams
    - Evidence of Lockout Tag Out Authorized training

    Other Requirements:
    - Requires Safety shoes
    - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
     
    Job Number: 353185
    Job Location: Stratford, CT.
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 1 year +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II

    Description:
    Required:CATIA V5 experience required with specific knowledge of GD&T and the application of the FTA tool. Aerospace experience preferred. SmarTeam experience preferred

    Essential Functions and Key Responsibilities:
    1) Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within current engineering protocols to design, develop and analyze aircraft structures, power plant component parts, mechanical and electrical systems and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.
    2) Analyzes and interprets engineering proposals to develop design for products.
    3) Reviews project documentation and proposed product specifications to determine design approaches.
    4) Confers with Project Management to clarify or resolve problems.
    5) Designs and develops structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports. 6) Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.
    7) Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.
    JOB QUALIFICATIONS: ENGINEER II Formal Education, Training, Professional Certification and Work Experience: Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
     
    Job Number: 13001BR
    Job Location: Tulsa, OK
    Rate: 34.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APA AVIATION STAFFING LLC
    Attention: Lisa A
    Address: 4150 INTERNATIONAL PLZ STE 510
    City, State: FORT WORTH, TX 76109
    Phone: 918/803-4005
    Website: apaservices.net

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II - Sim & Software

    Description:
    Engineer II - Sim & Software Engineer
    Savannah, GA
    48.00-53.00/Hr
    Long Term

    Contract - Engineer II - Sim & Software Engineer - Req 75962 in GAC Savannah
    Recruiter:Erin Redmond
    FAA Regulated?: No

    Unique Skills:
    1. Matlab/Simulink experience 2. Aircraft simulation software experience 3. Experience with high level programming or scripting language such as any of the following: C++, Python, Java 4. Knowledge of software development life cycle 5. Experience in an aircraft lab test environment desired 6. Aircraft Integration and/or HIL experience desired 7. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
    Languages Required (in addition to English): No Selection
     
    Job Number: 6360
    Job Location: Savannah, GA
    Rate: 48.00-53.00/Hr
    Per Diem: $110/Week/Split
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II - Test Automation

    Description:
    Engineer II - Test Automation


    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract
    1st Shift



    Unique Skills:
    - The ideal candidate will demonstrate willingness to learn/grow into a unique position providing Test Automation solutions for the industry's most advanced integrated aircraft systems.
    - Python, Matlab and Excel experience required. A combination of experience with the following are

    Highly preferred:
    - Computer Communications: ARINC, ASCB, CANbus, Ethernet
    - Linux, OpenWrt, Goebelyzer
    - GUI Development, Display Systems
    - PyQt, Open GL, GL Studio, DirectX
    - Data Acquisition and Post-Processing (IADS a plus)
    - Simulink, Simulation / Control, Real-Time Programming
    - VBA, C++, Visio, Subversion, DOORS


    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors, or less than 18 months engineering experience with Masters or PhD.


    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 6579
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Consultant

    Description:
    Engineering Consultant assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Principal duties and responsibilities are to contribute to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Use advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields. Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job • Advanced degree in engineering related field preferred •
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment and Furnishings Engineer

    Description:
    Equipment and Furnishings Engineer


    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract
    1st Shift



    Unique Skills:
    Applicant shall:
    - Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components.
    - Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements.
    - CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6802
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment and Furnishings Engineering Consultant

    Description:
    UNIQUE SKILLS
    APPLICANT SHALL
    Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components. Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements. CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

    JOB DESCRIPTION
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

    Position Purpose
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-648-83461
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F-15 Combat Aircraft Training Specialist IV (MO)

    Description:
    Develops, delivers and conducts customer training events for combat specific trainees via highly interactive courseware in state of the art electronic classrooms and simulator training devices at company and/or customer facilities. Provides input for developing and modifying engineering data, flight manuals, defining training requirements, standards and curriculum, schedules and related documentation. Pursues continuous process improvement. Serves as training liaison with internal and external customers. Demonstrates extensive knowledge of combat aircraft aircrew operations and training to resolve complex planning, coordination and development of requirements for multiple aircraft blocks, types and models. Oversees all phases of combat aircraft ground training delivery. Evaluates technical design features/changes to the operation of the combat aircraft systems and subsystems to assist the development of the physical/functional fidelity requirements to be incorporated into the applicable flight training devices. Participates and interfaces with operational level combat aircraft customers, customer test aircrews, company test aircrews and company engineering expertise via Technical Interface Meetings; Man-Machine Interface Meetings; Program Management Reviews, Program Design Reviews, and status meetings.

    Experience as a Pilot or Weapons System Operator in the F-15E/K/S/SG/C is required. Requires minimum of 5 years’ experience as a high performance fighter/attack aircrew with appropriate experience as Wingman, Element Lead, Flight Lead, Instructor Pilot, Weapons System Operator; Flight Examiner, Mission Commander or Pilot in Command. Platform instruction experience is required. Strong communication skills, and experience with Microsoft Office Products is a plus. Must be willing to travel for short term assignments. Must have a US SECRET clearance or be able to obtain one.
     
    Job Number: F15MO
    Job Location: Berkeley, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    FMS Test Engineer

    Description:
    POSITION ROLES AND RESPONSIBILITIES
    Sikorsky Aircraft is seeking candidates to support the Black Hawk helicopter program in the area of Avionics system integration. Primary technical responsibilities will be development and execution of automated and manual software test procedures of avionics systems including controls and displays, communication systems, navigation systems, and mission avionics systems for HH-60W/UH-60M/S-70i/S-70M aircraft.

    2-5+ years experience in developing and conducting formal requirements based testing of complex hardware / software systems is required. The candidate should be experienced in the use of digital bus analyzers, simulation techniques, and test automation techniques. Familiarity with the Black Hawk avionics and aircraft systems is desired. Knowledge of modern avionics architectures, components and system and software engineering processes is preferred.

    EDUCATION
    Bachelor of Science
     
    Job Number: 16-512-28077
    Job Location: Northeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facilities Assistants - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Facilities Assistants for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

    Job Duties:

    • Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
    • Monitors and replaces light bulbs in all assigned facilities, as needed.
    • Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
    • Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
    • Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
    • Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
    • Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
    • Responds to emergency situations for the purpose of resolving immediate safety concerns.
    • Performs other maintenance duties as assigned by the Facilities Supervisor.
    • Duties may require the self-performance of certain activities relating to projects
    • Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
    • Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
    • Review construction plans and detailed specifications to ensure alignment of project requirements.
    • Understand construction methods, materials, processes, and sequences of installation;
    • Assist in the logistics of contractor/supplier mobilization to perform work.
    • Assist in the coordination of contractor/supplier support for warranty repair execution;
    • Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
    • Complete/track work orders assigned by the Maintenance or Projects Supervisor.
    • Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
    • Coordinate/oversee contracted services during the performance of work.
    • Respond to equipment breakdowns and emergencies during off-hours.
    • Oversee and perform quality checks for planned work in the absence of supervisor.
    • Assist in the development of short interval schedules in coordination with planned work activities.
    • Perform other duties as requested or assigned.
    • Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators. Notifies Supervisor of corrective actions needed.
    • Adheres to safety policies, industrial practices.
    • Performs other duties assigned, including emergency call-in and shift rotation.

    Qualifications:

    • High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
    • Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
    • Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
    • CAD experience is a plus.

    Requirements:

    • Must be able to work any shift that client management determines necessary to support production demands.
    • Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
    • Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
    • Self-starter and team player.
    • Understand and follow oral and written instructions.
    • Ability to prioritize and manage multi-functional tasks.
    • Ability to work effectively under pressure, and against strict time constraints.
    • Knowledge of doors/hardware (locksets, door closures, frames).
    • Basic understanding to advanced knowledge of PLC systems.
    • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36316
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facilities Technicians - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Facilities Technicians for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

    Job Duties:

    • Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
    • Monitors and replaces light bulbs in all assigned facilities, as needed.
    • Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
    • Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
    • Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
    • Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
    • Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
    • Responds to emergency situations for the purpose of resolving immediate safety concerns.
    • Performs other maintenance duties as assigned by the Facilities Supervisor.
    • Duties may require the self-performance of certain activities relating to projects
    • Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
    • Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
    • Review construction plans and detailed specifications to ensure alignment of project requirements.
    • Understand construction methods, materials, processes, and sequences of installation.
    • Assist in the logistics of contractor/supplier mobilization to perform work.
    • Assist in the coordination of contractor/supplier support for warranty repair execution.
    • Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
    • Complete/track work orders assigned by the Maintenance or Projects Supervisor.
    • Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
    • Coordinate/oversee contracted services during the performance of work.
    • Respond to equipment breakdowns and emergencies during off-hours.
    • Oversee and perform quality checks for planned work in the absence of supervisor.
    • Assist in the development of short interval schedules in coordination with planned work activities.
    • Perform other duties as requested or assigned.
    • Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators.
    • Notifies Supervisor of corrective actions needed.
    • Adheres to safety policies, industrial practices. Performs other duties assigned, including emergency call-in and shift rotation.

    Qualifications:

    • High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
    • Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
    • Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
    • CAD experience a plus.
    • Must be able to work any shift that client management determines necessary to support production demands.
    • Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
    • Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
    • Self-starter and team player.
    • Understand and follow oral and written instructions.
    • Ability to prioritize and manage multi-functional tasks.
    • Ability to work effectively under pressure, and against strict time constraints.
    • Knowledge of doors/hardware (locksets, door closures, frames).
    • Basic understanding to advanced knowledge of PLC systems.
    • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

    Requirements:

    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36317
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flammability Engineer

    Description:
    The Flammability Engineer must have a good understanding of FAA regulation and a background in flammability testing and Certification. A flammability AR delegation under an ODA is preferred but not required


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flammability Engineer Tech Spec I

    Description:
    Flammability Engineer Tech Spec I

    Location: Savannah, GA
    Rate: $55.00 - $75.00/HR
    Long Term contract


    Unique Skills:
    - The successful candidate should have a good understanding of Interior Flammability certification requirements.
    - Having worked with AR's and an ODA is a plus.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6919
    Job Location: Savannah, GA
    Rate: $55.00 - $75.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer-Tech Spec II

    Description:
    Flight Controls Engineer
    Savannah, GA
    Rate: $58-$63

    Unique Skills:

    The ideal candidate should have the following experience: Systems Engineering (BSEE) Hardware in the loop test experience Experience with data acquisition systems Experience with Simulation Tools


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6801
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Operations Aircrew Loadmaster - Secret

    Description:
    **Must have active secret clearance
    Minimum of 1000 hours as a C5 flight engineer, C5Mexperience required.
    Flight instructor and/or flight examiner experience FAA Class II medical FAA Airframes and Power Plant License preferred
    C5 Flight Engineer Flies as the flight engineer on production and test operations
    **Provides support as C5M FLIGHT ENGINEER position on company aircraft.
     
    Job Number: Lock-Loadmaster
    Job Location: Marietta, GA
    Rate: $48.00-$58.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Operations Aircrew Loadmaster for C-5 with active secret GA

    Description:
    Lockheed Martin Aero 0348
    Job Title: Flight Operations Aircrew Loadmaster for C-5
    Location: Marietta, GA 30063
    Compensation: 48-58/hr (DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)
    Non-exempt
    1st Shift

    Description:


    Description

    Provides support as C5M
    FLIGHT ENGINEER position on company aircraft.

    Flies and supports developmental, engineering and production flight tests to determine compliance with specification and operational suitability.

    Acts as instructor aircrew for training of aircrew during syllabus training flights and may conduct classroom training of customer aircrew.

    Provides support to demonstration flights with customers, government officials, or other personnel aboard to exhibit aircraft systems performance and capabilities.

    Provides aircrew input and support to developmental and engineering teams, training, customer support and marketing teams regarding aircrew interfaces.

    Provides engineering and pilot input to training, customer support and marketing teams.

    Skill/Experience/Education
    Mandatory:

    Minimum of 1000 hours as a C5 flight engineer, C5Mexperience required.
    Flight instructor and/or flight examiner experience FAA Class II medical FAA Airframes and Power Plant License preferred

    Desired:

    C5 functional check flight experience FAA turboprop or turbojet flight engineer license Flight test experience

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    C5 Flight Engineer Flies as the flight engineer on production and test operations. 9-10 Years Yes
     
    Job Number: SW-0348
    Job Location: Marietta, GA
    Rate: 48-58/hr DOE
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Avionics Electrical

    Description:
    PURPOSE
    To conduct avionics/electrical flight testing of the CH-53K aircraft at Pax River.

    JOB DUTIES
    1. Conduct pre-flight briefings and post flight de-briefings
    2. Provide in-flight test leadership
    3. Conduct data monitoring
    4. Reduce and Evaluate flight test data
    5. Write flight test reports
    6. Support system trouble shooting and root cause analysis

    EDUCATION AND EXPERIENCE REQUIRED
    7 + years' related experience
    Bachelor’s Degree in related field (E.E./Aeronautical Eng. etc...)

    OTHER ASSIGNMENT DETAILS
    Initial program/system familiarization will be at the Development Facility Center in West Palm Beach, FL.
     
    Job Number: 16-645-1469
    Job Location: Southeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer
    Menominee, MI
    12+ month contract

    Open to Entry Level AND Sr. level candidates!

    POSITION RESPONSIBILITIES


    This individual will work in the Experimental Engineering department and will be responsible for conducting R&D and certification ground/flight tests. The candidate will be responsible for test preparation, planning instrumentation installations, instrumentation and equipment calibration, programming data acquisition software, data reduction, and test reporting. He/she will assist in test conformities and TIA preparation, participate in FAA certification projects, support safety of flight briefings, and assist other Engineering Groups on an “as needed/as available” basis depending upon his/her other skills and abilities.


    Duties include but are not limited to the following:

    This individual will be responsible for R&D and certification ground/flight tests, including:
    •Reviewing proposed projects and developing compliance and test matrices
    •Planning, writing, and/or reviewing test plans and reports
    •Programming data acquisition software
    •Data reduction
    •Planning aircraft flight and ground test instrumentation installations
    •Instrumentation and equipment calibration
    •Conducting weight and balance and maintaining records
    •Conducting ground/flight tests, including pilot coordination and pre/post flight briefings as required
    •Coordination and preparation of test conformities and TIA activities




    REQUIRED KNOWLEDGE, SKILLS AND ABILITIES
    •Minimum of a Bachelor’s of Science degree in Aerospace Engineering, Engineering Physics, or related field.
    •An understanding of aircraft structure and systems, rotorcraft dynamics, aerodynamics, and powerplant.
    •An understanding of FAA rules, regulations, and certification processes.
    •An understanding of and ability to write test practices and procedures.
    •Experience with strain gauges, instrumentation, and wiring.
    •Intermediate understanding of data acquisition software (LabView and/or Matlab preferred).
    •Advanced computer skills (MS Word, Excel, PowerPoint, Project).
    •Superior problem solving skills.
    •Superior communication skills (verbal and written).
    •An ability to work multiple projects and multi-task.
    •Proven organizational skills.
    •Works with minimal supervision
    •Ability to work within a team
    The following are desirable, but not required:

    •FAA A&P License
    •FAA Pilot License
    •Understanding of Microsoft Access
    •Basic design skills (SolidWorks, CADKey)
     
    Job Number: 51046
    Job Location: Menominee, MI
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12+ months
    Start Date: 1/23/16
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

    The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

    Job Duties and Responsibilities (Essential Functions):

    � Provide instrumentation services: to include:
    o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
    � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


    Knowledge/Skills/Abilities:
    � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
    o Electrical and avionics design,
    o Data Systems Design Principles
    o Telemetry
    o Air data booms (straight nose and swivel-head)
    o Static trailing cones
    o Sensitive aircraft instruments
    o Cockpit displays
    o End-user interface
    o Portable test equipment such as hand-held stick force gauges
    o High-end GPS receivers and antennas for precise aircraft positioning
    o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
    o Pressure transducers
    o Flowmeters
    o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
    o Strain gauges, load cells, force transducers, torque sensors
    o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
    o Video recording equipment
    o Signal conditioners
    o Data acquisition systems and data loggers
    � Intermediate knowledge of flight test operations and flight certification.

    Level Requirements (Minimum):
    Education
    � Formal Instrumentation Training (Military or Civilian) � Preferred
    � BS in Engineering or equivalent experience

    Experience
    � 5+ years relevant technical experience
    � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    DUTIES:

    � Develop System Test Plans, execute simulator and system flight tests, and document test results. This includes determining, communicating, and documenting flight test objectives, and developing test cards accordingly.
    � Participate in flight readiness reviews, test event briefs, and post-test debriefs with UAV Operators and Observers.
    � Coordinate the use of test ranges with UAV Operators and Observers.
    � Ensure test assets are prepared to support testing, including checking that product hardware and software are properly configured, test cards and procedures are written, equipment is operational, batteries are charged, etc.
    � Participate in test activities, fill in test data sheets, and transfer telemetry files to the network.
    � Debrief engineering and management team on results of flight and simulator tests.
    � Capture test failure details in defect reports, using an issue tracking system, like Bugzilla or JIRA.
    � Position may require up to 25% travel.

    QUALIFICATIONS:
    � Bachelor�s Degree (strongly preferred) from an accredited University in Electrical Engineering, Software Engineering, Aerospace Engineering, or a related discipline.
    � 7+ years of experience in multiple engineering projects including research and development efforts, with a focus on unmanned aircraft systems, simulation, integration, and test. Demonstrated ability to successfully contribute to successful short term projects (3 � 9 months).
    � Familiarity with unmanned aircraft systems, including avionics, power, and Ground Control Stations (GCS�s).
    � Minimum 3 years of experience conducting system tests or flight tests.
    � Ability to develop ad hoc tests to troubleshoot test failures.
    � Ability to analyze test data using software tools like MATLAB or Excel.
    � Desired hands on lab experience in test engineering, including use of test and measurement equipment.
    � Strong computer skills including Microsoft Office, engineering analysis tools (e.g., MATLAB, Simulink), and software development environments (e.g., Visual Studio).
     
    Job Location: Simi Valley, CA
    Rate: Open
    Duration: 6 months potential to be Permanent
    Start Date: Immediate
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineers - Secret

    Description:
    **Must have Active Secret Clearance
    Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.
    Aircraft maintenance experience at a supervisor level.
    Experience in Fault Isolation.

    Desired Skills: Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
     
    Job Number: Lock-Flight Test
    Job Location: Patuxent River, MD
    Rate: $40.00-$50.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/ORL
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/SEA
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Technician

    Description:
    This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
    Responsibilities:
    � Reading and creating wire diagrams.
    � Selecting or auditing appropriate sensors given engineering requirements.
    � Working with customers and engineers to define appropriate instrumentation requirements.
    � Designing instrument installations and creating installation instructions.
    � Instrumentation installation.
    � Evaluating instrumentation installations for function and safety.
    � Troubleshooting instrumentation problems.
    � Data acquisition system operation.
    � Documenting data system practices and procedures.
    � Generating instructions and operation manuals.
    � Developing sensor calibration and functional test procedures.
    � Maintaining calibration records.
    � Domestic and international travel may be required.
    Desired Qualifications:

    � 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
    � Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    � Ability to work interdependently, and lead small groups.
    � CATIA V experience beneficial.
    � Experience with data processing and analysis beneficial.
    � Computer programming experience beneficial.
    � Proficient in working with Microsoft Office applications including Word and Excel.
    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Moses Lake, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test with active secret MD

    Description:
    Lockheed Martin Aero 0322
    Job Title: Flight Test
    Location: PAX River, MD 20670
    Compensation: 40-50/hr (DOE)
    Assignment Length: 10 + month contract
    Security Clearance Secret (Prime Contract:N00019-02-C-3002, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non Exempt
    3rd Shift

    Description:

    Flight Test Control Engineer for Navy F-35 test aircraft at Patuxent River NAS, Maryland. The successful applicant will provide Flight Test Ground and Flight Operations engineering support.

    Tasks will include coordination and execution of pre-flight and post-flight activities to ensure aircraft's test readiness including issuance, and closure of documentation relating to work performed on the aircraft, and coordination of aircraft modifications.

    Position is responsible for control and tracking of aircraft configuration, coordinating and staging of support equipment, and coordinating with other organizations associated with test readiness.

    Skill/Experience/Education
    Mandatory:

    Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.Aircraft maintenance experience at a supervisor level.

    Experience in Fault Isolation.

    Demonstrated Verbal and Written Communication skills across all levels of management. Ability to travel as required.

    Desired:

    Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
     
    Job Number: SW-0322
    Job Location: Pax River, MD
    Rate: 40-50/hr DOE
    Duration: 10 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Graphics Designers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Graphic Designers for open positions in Melbourne, Florida.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Assist with development and implementation of graphic materials for the worldwide marketing and sales teams. Interface with external creative agencies and graphics department as required. Ensure consistent corporate branding and product image quality.

    Job Duties:

    • Assist in development and implementation of worldwide graphic design strategies in conjunction with creative agencies to promote the client’s brand.
    • Plan creative concepts by gathering information and materials.
    • Manage digital assets: images touch up and post-processing, naming convention, managing the library (upload new assets, remove outdated ones, etc)
    • Provide creative direction and best practices advice on design layout and project’s technical specifications.
    • Ensures brand identity guidelines are being followed consistently worldwide.
    • Create and implement worldwide graphic marketing materials and presentations in both print and digital formats, including website graphics, print ads, email campaigns, signage, trade-show displays, invitations, photographs, videos and digital kiosks.
    • Create, update and enhance graphical depictions of aircraft performance, range maps, charts, etc. to promote the client brand.
    • Create, update and enhance presentations for the worldwide sales and marketing team.
    • Partners with other internal departments and third-party vendors for all creative and production needs.
    • Interface with Authorized Sales Representative (ASRs) and other departments to ensure any outside graphic development maintain client’s global branding guidelines.

    Qualifications:

    • BA or BFA Degree majoring in Graphic Design, with a concentration on web design fundamentals.
    • Minimum 1-5 years’ experience in graphic design and front-end web design required.
    • Fundamental understanding of visual design methods, philosophies and techniques
    • Experience with luxury products or similar services.
    • Aviation or Yachting experience preferred but not required.
    • Solid, well-organized portfolio of previous and recent work.

    Requirements:

    • Essential competency using most current versions of design software: InDesign, Photoshop, Illustrator (Adobe CS6 or Creative Cloud).
    • Working competency with HTML, CSS and other web graphic standards.
    • Good understanding of typography methods and applications.
    • Adobe After Effects, Premiere and Flash experience will be helpful, but not required.
    • Javascript or other software programming skills will be helpful, but not required.
    • Any 3D software skills and experience will be helpful, but not required.
    • Proficient in PowerPoint, Word and Excel.
    • Excellent skills with Photoshop, Illustrator and other graphic and layout software.
    • Good written and verbal communication skills.
    • Relevant experience with Digital Asset Management practices.
    • Competency of photography skills and practices preferred but not required.
    • Excellent organizational and interpersonal skills.
    • Self-starter.
    • Ability to travel domestically and internationally to support the marketing and sales departments. 10%-15% travel may be required.
    • Commitment to company values and compliance with department norms, policies, directives, and procedures.
    • Incorporates Lean and P3E processes and concepts into daily activities.
    • Strives for continuous improvement to processes and procedures.
    • Honors and protects confidential and proprietary documents and information.
    • Satisfies work schedule requirements.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 30352
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Engineer

    Description:
    Ground Test Engineer - 2 Year Contract for our client in Stratford, CT!

    Role & Responsibilities

    Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.

    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.

    Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
    Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.

    A large portion of the job is oversight of supplier performed component qualification efforts.

    Previous experience in this area is recommended.
    Education:

    Bachelor of Science
     
    Job Number: 352694
    Job Location: Stratford, Ct.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Human Factors Engineer

    Description:
    Human Factors Engineer

    Location: Savannah, GA
    Rate: $70.00 - $80.00/HR
    Long Term contract


    Unique Skills:
    - Provides guidelines in application of Human Factors (HF) requirements to equipment design during all stages of the design process, from concept definition through detailed design.
    - Applies structured quantitative or subjective methods to generate HF requirements and ensures human centered design and optimum usability in the operation, maintainability, and/or manufacturing of aircraft systems.
    - Leads and/or performs structured test plan development and analysis of full and part task simulations using prototyping tools to obtain early, multiple user feedback for HF requirement definition.
    - Provides analysis of detailed design concepts to functional teams through the use of modeling techniques for reach and force requirements for a wide anthropometric range of individuals of a targeted population.
    - Holds multidisciplinary review meetings as needed to clarify analysis goals.
    - Creates specific project milestones that can be integrated in the overall group product plan and schedule.
    - Creates and supervises pilot workload assessments through measurement techniques such as rating scales, questionnaires, and flight technical error analysis.
    - Generates estimates of procedural human error using task analysis and human error analysis methods.
    - Collaborates on the coordination and development of facilities and/or technology to support simulation testing.
    - Creates flight test plans and reports, engineering reports and/or memos to substantiate compliance with human factors certification regulations
    - Develops trade studies on system design concepts and presents human factors recommendations to multidisciplinary design teams and upper management.
    - Minimum a Bachelor degree (a Master degree is preferred) in a related area (e.g. Human Factors Engineering, Human Factors Psychology, Industrial Engineering, Human Computer Interaction, Aerospace Engineering) or equivalent combination of appropriate education experience
    - Minimum of ten years in Human Factors, or fifteen years with exceptional broad qualification in several related disciplines (aviation/aerospace experience is preferred)
    - Experience with simulation software is an advantage (e.g. CATIA V5 Human Builder, 3DSSPP, iData)
    - Experience with requirements management tools is an advantage (e.g. DOORS)
    - Flying experience is an advantage (e.g. PPL, CPL, ATP)


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6906
    Job Location: Savannah, GA
    Rate: $70-$80
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design, Electro-Mechanical Systems Engineer/TSII

    Description:
    UNIQUE SKILLS
    Basic understanding of Hydraulics as it applies to aircraft is required. Use of CATIA or similar 3D CAD system is required. Experience with Hydraulic Design preferred. Experience with CATIA tubing work bench is preferred. Experience with designing for compliance to FAR 25.1435 is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-629-78841
    Job Location: Southeast
    Rate: $60.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer III

    Description:
    OCCUPATIONAL SUMMARY
    Provide support to leads and operators in the assembly and/or fabrication areas. Provide information and support for process improvement. Plan, structure and implement manufacturing programs.
    Support manufacturing assembly and fabrication to trouble shoot both assembly and fabrication problems. This requires close interaction with assembly personnel, fabrication personnel, and their supervision. Must support all lean manufacturing improvements and may require participation in lean improvement activities. Must also work closely with Quality Assurance, Program Management, Engineering, and shop Managers to resolve quality issues, increase productivity, and eliminate ergonomic problems.

    AN INDUSTRIAL ENGINEER III MUST EXHIBIT THE FOLLOWING CHARACTERISTICS
    A documented history of supporting manufacturing fabrication and assembly departments in identifying and resolving production problems and issues.
    Demonstrates the ability to facilitate continuous improvement in the production process.
    Must be experienced in interacting closely with personnel at all levels of the manufacturing system, including supervision and management.
    Must be able to assume a leadership position in regard to Lean Manufacturing improvement projects, and exhibit a record of actively supporting past projects.
    Must be capable of interacting regularly and cooperatively with Quality Assurance, Program Management, Engineering, and Production Management to resolve quality, productivity, ergonomic and safety issues.
    Must be capable of initiating improvement projects resulting in labor, material, space, manpower, and/or other measurable cost reductions.
    Must have a working knowledge of current 6S factory practices
    Should be familiar with company policies regarding worker safety and have demonstrated the ability to identify and resolve safety issues in the workplace.
    Knowledgeable of Life Safety Code as it applies to manufacturing layouts.
    Must have demonstrated above average capability for developing engineering analysis.
    Must have knowledge of basic material handling principles and products
    Must be capable of developing special projects that are reviewed at the Zodiac level.
    Uses statistics as a normal tool for resolving issues.
    Leads or assists process improvement teams.

    DUTIES AND RESPONSIBILITIES
    Provide support to leads and operators in the assembly and fabrication areas.
    Analyze parts and seat flow.
    Conducts labor and machine time studies, operator work and motion studies, material and work flow studies in order to suggest and implement more economical and efficient manufacturing practices. Uses gathered data to establish and publish Standard Labor and Machine Data, and to calculate manpower and machine requirements.
    Balance the lines or cells and implement procedures and/or operator instructions to support process improvement.
    Participate to the implementation of structure and plan manufacturing programs (Lean Manufacturing, Set-up Reduction, 6S, Cost Reduction).
    Apply statistical data analysis in normal duty activities.
    Measures, analyzes, and adjusts Factory Floor Layout to achieve optimum manufacturing productivity as directed by Lean Manufacturing practices, subject to managerial approval.
    Design of major layouts with product flow, material handling considerations, and infrastructure provisions.
    Creates and documents Standard Work Instructions for use by factory personnel, in compliance with design and quality specifications and FAA directives
    Participates in training shop personnel in new and/or updated processes, including Lean Manufacturing practices and improvement implementations.
    Introduces new production processes and equipment.
    Participate on concurrent engineering teams and verify adequacy/optimization of design in regard to weight and cost restrictions.
    Collaborates with engineering design personnel to influence product design and thus provides for good production methods and economical tooling.
    Analyzes engineering design documents, prototypes and/or engineering change orders and determines if an assembly or fabricated part can be manufactured. Communicates back to engineering and/or R&D to discuss needed changes.
    Reviews and approves new and revised engineering drawings through the drawing release system.
    Reviews changes in engineering design, planning, tooling, and NC programming to determine impact on current processes, methods and work instructions. Follows through with updating standard data and standard work instructions per such changes.
    Investigates serious or recurrent production difficulties and delays due to such factors as faulty methods, tooling, operational sequences, or inadequate facilities or layouts.
    Frequently contacts supervisory and non-supervisory personnel in engineering, production planning, tool design and other departments for the purpose of discussing production problems in order to secure necessary information or consider factors which may interfere with the effectiveness of production. Takes preventive or corrective action to remedy the problem or refer it to others who may be more directly responsible.
    Develops new ideas and methods, and recommends changes in existing tooling to secure the most economical production. Submits cost reduction ideas.
    Continuously analyzes current processes, tooling and methods in the factory for labor and/or cost reduction opportunities. Documents such opportunities and submits suggestions for managerial approval. Implements all approved suggestions. Investigates new manufacturing processes and plans implementation, including acquisition of new equipment and/or facilities.
    Completes all assignments aimed at determining optimal methods and processes for manufacturing designated company products.
    Establishes and maintains interaction with outside vendors with a view to improvement opportunities relating to equipment and processes. Makes investigative visits to such vendors when required.
    Cooperates with Safety and Health personnel to optimize factory safety conditions, and with Energy personnel to monitor and optimize energy and fuel usage within the facility.
    Manages significant cost capital projects including identification of equipment, justification of capital, and ensures schedule and installation is per plan.
    Uses published Master Schedule and Production Requirements data to develop manufacturing capacity analyses for all of the manufacturing departments and work centers involved in meeting the Production Plan. Regular electronic reports will be presented to upper management for determining actions for solving any capacity issues.
    Prepares regular Manpower reports to relay information regarding manufacturing departments or work centers that are in need of employee and/or equipment adjustments.
    Prepares Manpower/Capacity/Forecast reports for aircraft manufacturers (i.e. Boeing, Airbus, etc.) to relay the companys production capability to manage future commitments.
    Maintains a current electronic listing of all active manufacturing work centers.
    Makes regular oral and written reports and/or presentations to supervisory and managerial personnel on any of the above activities.

    QUALIFICATION REQUIREMENTS
    KNOWLEDGE AND SKILLS
    Requires sufficient training to permit ready comprehension of problems having to do with production methods and facilities.
    Must be capable of preparing well-written and orderly reports.
    Must have sufficient knowledge of manufacturing and related operations with detailed knowledge of such fields as product design, engineering function, tool design, tool fabrication, space layout, handling equipment, production machinery and equipment, NC machinery and equipment, factory methods work, etc.
    Must have knowledge of trigonometry, algebra and statistics.
    Must be proficient in inventory management, product data management, monitoring production control and cost, and in manufacturing resource planning.
    Strong knowledge of motion and time study principles
    Knowledge and experience in Lean Manufacturing.
    Strong PC skills, knowledge of all Microsoft software
    Able to lead teams of people towards focused and defined objectives
    Strong Working knowledge of AutoCad
    Strong knowledge of motion and time study principles

    EDUCATION AND/OR EXPERIENCE
    MUST HAVE ONE OF THE FOLLOWING
    Must have a B.S degree in a related technical field (e.g.: IE, ME, EE) or an Associate degree with 3 years related experience or 6 years of job related experience.
    Additionally 12 years of manufacturing/industrial engineering experience.
    State registered professional engineers license in BSME, BSMfgE, BSEE, or BSIE and twelve (12) years of manufacturing experience.

    COMMUNICATION SKILLS
    Strong leadership and communication skills. Ability to communicate with all levels of management, peers, operators and customers. Must have the ability to generate written communication and to operate required office equipment. Must be able to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
    Must be capable of communicating electronically via email. Must have working knowledge of Excel, Word, PowerPoint and other applicable computer softwares.

    REASONING ABILITY
    Ability to think strategically and resolve problems. Must be able to make decisions. Must be able to interface with other departments and vendors.

    PHYSICAL DEMANDS
    This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

    Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
     
    Job Number: 16-611-7927
    Job Location: South-central
    Rate: $70K to $90K
    Per Diem: No
    Overtime: Possible
    Duration: DIRECT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Strain Gage Technician

    Description:
    Instrumentation Strain Gage Technician

    Assignment (Contract): 1 year
    Location: Stratford, CT
    Industry: Aviation/ Aerospace
    2 openings 1st and 2nd shift

    Position Roles & Responsibilities:
    Candidate must have 7 to 10 years� experience. Strong strain gage installation experience required to support ongoing Engineering Flight and Ground test operations. Must have knowledge of strain Gage Bridge wiring methodology. Must be able to Select, Apply, and Wire strain gages to aircraft and facility components manufactured from of a variety of metals and composites.

    Must have experience and ability to accomplish required surface preparation, gage measurement, layout, alignment and bonding.

    Must have experience with measurement systems, instrumentation wiring and documentation.
    Supplier Instructions & Candidates Details
    Notes to suppliers: Contractors must be able to provide current LO/TO Authorized certification (OSHA 1910.147) prior to starting assignment. If the candidate is unable to provide current and acceptable documentation of proof of their LO/TO Authorized knowledge the below online course must be taken and certification of completion must be provided prior to beginning assignment.�
     
    Job Number: 352697
    Job Location: Stratford, CT.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instumentation Strain Gage

    Description:
    Johnson Service Group is seeking an Instrumentation Strain Gage Technician for a 12+ month contract opportunity in Stratford, CT!!!

    1ST AND 2ND SHIFTS AVAILABLE

    Description: Skills/Experience Required

    7 to 10 years� experience doing the exact skills required for this position.
    Strong strain gage installation experience required to support ongoing Engineering Flight and Ground test operations.
    Must have knowledge of strain gage bridge wiring methodology.
    Must be able to Select, Apply, and Wire strain gages to aircraft and facility components manufactured from of a variety of metals and composites.
    Must have experience and ability to accomplish required surface preparation, gage measurement, layout, alignment and bonding.
    Must have experience with measurement systems, instrumentation wiring and documentation.
    Education/ Certifications

    High School Diploma or GED minimum
    Contractors must be able to provide current LO/TO Authorized certification (OSHA 1910.147) prior to starting assignment. If the candidate is unable to provide current and acceptable documentation of proof of their LO/TO
    Authorized knowledge the following online course must be taken and certification of completion must be provided prior to beginning assignment.�
     
    Job Number: 352698
    Job Location: Stratford, CT.
    Rate: Open
    Per Diem: If Qualified
    Overtime: Possible
    Duration: 1 YR +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker

    Description:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations is preferred.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
    7. Actively works to improve daily processes and ensures all work meets customer requirements
    8. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
     
    Job Number: 24-145
    Job Location: Savannah, GA
    Rate: $55 to $57
    Per Diem: YES
    Overtime: YES
    Duration: 1 year+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker (Catia V5)

    Description:
    Ideal Candidates will have 2-D Drawing and 3-D Model Checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System
     
    Job Number: 24-173
    Job Location: Savannah, GA
    Rate: $58 to $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    Landing Gear System requirements verification and validation (ARP4754).
    Prepare and review test specifications, procedures and test reports.
    Support flight test and ground test activities.
    Analyze test data and evaluate system operation.
    Provide engineering input to technical reviews
    Identify and communicate technical risks for the landing gear system
    Support overall certification effort for the landing gear system

    Desired Qualifications:

    Landing Gear/Brakes anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    Aircraft flight test certification program experience.
    Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    Knowledge of materials, mechanical systems, and failure mechanisms
    Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Ability to represent the client professionally and positively during client interactions and meetings.
    Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: LA
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lynn Launer
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Land/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: open
    Per Diem: yes
    Overtime: no
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Management Analyst - 3 CA

    Description:
    Logistics Management Analyst - 3 (Job Number: 16024560)

    Number of Openings: 1

    Location(s): United States-California-El Segundo


    Shift: 1st Shift

    Target Start Date: Dec 30, 2016

    Rate: $46/hr.

    Duration: 6 months

    Work Week: 9/80

    Northrop Grumman Aerospace Systems is seeking a Logistics Management Analyst for the F/A-18 program located in El Segundo, CA.

    The candidate will be assisting with the management of retrofit changes to delivered F/A-18 A-G aircraft from contract award through engineering development, kit part accumulation and kit Validation and Verification. Ensure affected functions maintain schedule to support engineering development and kit delivery. Report to Program Management the status of same. Track financial performance of each Engineering Change Proposal (ECP) and report to Program management monthly. The candidate will also develop the L-58 data package from released Post Production engineering and deliver to Boeing in accordance with the established delivery schedule.

    The Candidate will respond to Requests for Quotes from the customer for retrofit changes to the F/A-18 A-G aircraft. Coordinate with the proposal manager regarding all aspects of the change in order to provide cost effective estimates for the Post Production organization.

    The Candidate must be able to communicate clearly verbally and in writing, and work with all affected organizations throughout the program to ensure on time schedule performance. Candidate must also be able to provide recommendations regarding process improvements.


    Basic Qualifications:

    Technical BS Degree with 6 years’ experience, 4 years’ experience with Master’s Degree.


    Preferred Qualifications:

    F-18 aircraft experience

    - Prior experience with post production support of military aircraft
    - Extensive logistics or prior military experience
    - Understanding of engineering drawings and engineering release process
    - Competent user of Microsoft Products
     
    Job Number: MB-16024560
    Job Location: El Segundo, CA
    Rate: 46/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Management Analyst - 3 CA

    Description:
    Logistics Management Analyst - 3 (Job Number: 16024560)

    Number of Openings: 1

    Location(s): United States-California-El Segundo


    Shift: 1st Shift

    Target Start Date: Dec 30, 2016

    Rate: $46/hr.

    Duration: 6 months

    Work Week: 9/80

    Northrop Grumman Aerospace Systems is seeking a Logistics Management Analyst for the F/A-18 program located in El Segundo, CA.

    The candidate will be assisting with the management of retrofit changes to delivered F/A-18 A-G aircraft from contract award through engineering development, kit part accumulation and kit Validation and Verification. Ensure affected functions maintain schedule to support engineering development and kit delivery. Report to Program Management the status of same. Track financial performance of each Engineering Change Proposal (ECP) and report to Program management monthly. The candidate will also develop the L-58 data package from released Post Production engineering and deliver to Boeing in accordance with the established delivery schedule.

    The Candidate will respond to Requests for Quotes from the customer for retrofit changes to the F/A-18 A-G aircraft. Coordinate with the proposal manager regarding all aspects of the change in order to provide cost effective estimates for the Post Production organization.

    The Candidate must be able to communicate clearly verbally and in writing, and work with all affected organizations throughout the program to ensure on time schedule performance. Candidate must also be able to provide recommendations regarding process improvements.


    Basic Qualifications:

    Technical BS Degree with 6 years’ experience, 4 years’ experience with Master’s Degree.


    Preferred Qualifications:

    F-18 aircraft experience

    - Prior experience with post production support of military aircraft
    - Extensive logistics or prior military experience
    - Understanding of engineering drawings and engineering release process
    - Competent user of Microsoft Products
     
    Job Number: MB-16024560
    Job Location: El Segundo, CA
    Rate: 46/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MP&P Technical Analyst III - Aircraft Structures Assembly - PA

    Description:
    Evaluates parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications. Analyzes failed parts and processes to reduce or eliminate future failures. Generates test plans, identifies and categorizes failures, determines root cause and documents results and recommendations. Proposes, develops and validates revisions to procedures and specifications. Determines suitability of parts, materials and processes. Determines suitability of parts, materials and processes and coordinates resolution of issues with suppliers and customers. Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology. Provides knowledge and technical consultation to internal and external customers. Works under general direction.

    Additionally...
    Required intermediate experience with Aircraft structures assembly
    Required intermediate experience with Assembly Process
    Required intermediate experience with Oral and Written
    Communication Skills
    Required intermediate experience with Ability to Read Engineering Drawings
    Required intermediate experience with Aircraft structures assembly
    Required intermediate experience with Assembly Process

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
     
    Job Number: MP&PTechPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintainability Engineer III

    Description:
    Maintainability Engineer III
    Savannah, GA
    Rate: $67

    Unique Skills:

    Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.


    Education and Experience Requirements:

    Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

    Position Purpose:

    Responsible for participating in the planning, development, and sustainment of Gulfstream Aircraft Maintenance Programs and related issues regardless of complexity.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

    Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
     
    Job Number: 6825
    Job Location: Savannah, GA
    Rate: $67
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintenance Controllers - Addison, TX

    Description:
    STS AeroStaff Services is currently hiring Maintenance Controllers for open positions in Addison, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Perform accounting support duties including processing of vouchers, reconciling accounting transactions, and maintaining files. Applies accepted procedures to the preparation and maintenance of financial and business transaction data, and prepares reports to ensure accurate accounting records.

    Job Duties:

    • The Maintenance Control team provides surveillance, control, and direction for all aircraft maintenance 24 hrs a day, 7 days a week as well as effects aircraft repair.
    • Monitor the daily operation relative to plan, coordinating related maintenance activities and providing assistance in preventing or minimizing schedule interruptions due to maintenance requirements.
    • Coordinate with Flight Following, Flight Crew, Mechanics, Planning and Stores, the requirements to maintain flight schedule in accordance with procedures in the GMM
    • Develop total nightly workload packages and balance workload with regard to required and available resources.
    • Initiate MEL tracking numbers track MEL to keep within limits and log information.
    • Keep maintenance stations informed of MEL item coming through their respective stations.
    • Perform scheduled maintenance to keep aircraft in peak operating condition.
    • Initiate repairs/replacement to acceptable or approved technical data and instructions.
    • Tests, inspects and checks all repairs/installations to ensure proper operation. Conducts repairs in a time-efficient manner.
    • Provide technical assistance to contract agency maintenance personnel to assist with the maintenance operation.
    • Plan and schedule lower level maintenance checks and non-routine maintenance work.
    • Initiate, prepare and inform QC of MEL escalation.
    • Prepare reports concerning pertinent aspects of aircraft maintenance operation and for identification of issues requiring special attention.

    Qualifications:

    • Certificated A&P mechanic.
    • 3+ years’ experience in heavy line maintenance of transport category aircraft, preferablyDC-9/MD-80/737 series.
    • Familiarity with FAA 121/145 regulations.

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 35101
    Job Location: Addison, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer

    Manufacturing Engineer must have experience with aircraft major structural assemblies/installations. Experience with Soloumina, Smarteam, Catia V5 preferred.
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Manufacturing Engineers for open positions in Melbourne, Florida.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Description:

    The Manufacturing Engineer creates and administers the overall planning for the facility activities from components receiving to the delivery of finished aircraft including productive activities and its support processes.

    Job Duties:

    • Prepare and manage short, medium and long term production planning.
    • Ensure effective measurements and visibilities of inputs and outputs for the relevant processes to assure goals are achieved and cost objectives are met.
    • Perform continuous evaluation of critical resources to avoid bottlenecks.
    • Compile reports on the progress of work and on production problems.
    • Control work load and work capacity.
    • Plan and coordinate actions to implement product changes.
    • Coordinate actions for earlier deviations recovery and prevent impacts on company targets and obligations.

    Qualifications:

    • Must have Bachelor’s Degree in Industrial, Process, or Aeronautical Engineering.
    • A degree in management or business administration a plus.
    • APICS (Advancing Productivity, Innovation and Competitive Success) certificate a plus.
    • Must have at least 5-7 years’ experience in similar activities (planning or production planning).
    • Prior aircraft manufacturing/maintenance and repair experience preferred.
    • Prior Design experience preferred.

    Requirements:

    • Comprehension, understanding and execution of broad practices associated within the field assigned and related fields.
    • Applies these understandings in the completion of complex work assignments.
    • Experience in an aircraft production environment.
    • Project management & risk analysis experience.
    • Proficiency with planning practices and tools.
    • Strong organizational skills.
    • Strong verbal and written communication skills.
    • Utilization of Lean Production concepts.
    • Systemic vision.
    • Data analysis and consolidation.
    • Cope with deadlines and other pressured situations.
    • Interact with senior management, and staff.
    • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    • Ability to work flexible hours and different shifts if required.
    • Employees will be subject to the random drug and alcohol testing under FAA regulations.
    • Commitment to company values and complies with department norms, policies, directives, and procedures.
    • Incorporates Lean and P3E processes and concepts into daily activities.
    • Strive for continuous improvement to processes and procedures.
    • Honors and protects confidential and proprietary documents and information.
    • Satisfies work schedule requirements.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37240
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer III - MP&P Engineer (PA)

    Description:
    MP&P Engineer 3 Assignment
    Defines requirements for materials, parts and processes used in the manufacture of products. Produces specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Works under general direction.

    Additionally…
    The main focus of this assignment will be CH47 Chinook factory support. This includes being co-located on the factory floor working with existing processes and equipment associated with the rotorcraft production line, identifying effective manufacturing technology (processes, tools and equipment) to accomplish the build work statement, supporting repair of defective conditions on the aircraft, project management skills, specifically for projects that develop and insert manufacturing technology into current or future build process, and daily interaction with shop personnel. Identify safety and ergonomic improvements. Provide portable and perishable tool recommendations.

    MORE SPECIFIC ASSIGNMENT QUALIFICATIONS:
    _Ability to work with factory mechanics, as well as other organizations such as ME, QA, IE and Engineering are required.
    _Initiative, teaming, planning, project management and communication skills are required.
    _Ability to innovate and strategize, as well as work with details to drive projects to successful completion and implementation.
    _CAD, CATIA, or Solid Works, MS Office, 3D printing are required—Must state the level or experience and training in each of these skills.
    _Assignment may require occasional domestic travel of approximately 5% from Boeing to Suppliers facilities.
    __Assignment requires ability to work overtime and/or different shifts when needed.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: MP&Ppa
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Processes Engineer / MP&P IV (PA)

    Description:
    Defines requirements for materials, parts and processes used in the manufacture of products. Ability to lead production of specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Ability to lead development and qualification of new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts complex analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Ability to lead, design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under minimal supervision.

    SPECIFIC ASSIGNMENT QUALIFICATIONS…
    Assignment will support the Chinook program. Must have experience in applied knowledge of metallic materials in order to develop, select, or recommend materials that meet the environmental, regulatory, and design requirements of Rotorcraft products. Must be able to interpret material and process specifications in order to provide clarification and ensure specification intent is met. Must be able to review and or approve new and revised engineering documents/drawings by analyzing proposed changes in order to assess the impact on aircraft products and assemblies. (e.g., material specifications, process specifications, part standards, support specifications, manufacturing planning, industry/military standards) Apply engineering knowledge in order to write engineering specifications and develop projects to resolve problems and improve manufacturing processes (e.g., time, cost, etc.). Ensures application of best practices and identifies the need for enhanced processes, methods, and tools. Provide technical design support to program integrated product teams. Provide production shop support to disposition non-conformances and support program production needs. Provide technical support to suppliers as directed by program. Communicate with customers, teaming partners, subcontractors, and suppliers to exchange technical data. Must possess strong technical background in metallic aerospace materials and processes. Background should include knowledge of ferrous metallurgy, steel making processes, corrosion principles, Non-Destructive Evaluation Processes. Must be able to write technical papers summarizing results of investigations. Must be able to effectively communicate and be proficient with Information Technology tools.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    We also offer full medical, dental, vision, and 401k, including a bonus plan.

    We can also give you the per diem split if you qualify.
     
    Job Number: MP&Ppa
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Process Engineer

    Description:
    Materials and Process Engineer - Technical Specialist II


    Location: Savannah, GA
    Rate: $55.00 - $63.00/HR
    Long Term contract
    4x10


    Unique Skills:
    - Lead engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development.
    - Majority of the engineering projects and critical problems involve polymer matrix composites technology.
    - Bachelor's degree in engineering or related field. Thirteen (13) years in polymer matrix composites.
    - Experience generating FAA approved material test plans, equivalency test plans and reports required.
    - Experience generating material and process specifications, performing statistical analysis of material qualification data and material allowable, test plans, and reports required.
    - Experience performing root cause analysis and documenting results and recommendations.
    - Experience with Project Management earned value system.
    - Demonstrates a productive working relationship with material suppliers.
    - Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology.
    - Reviews and approves multi-discipline Smarteam workflows from an M&P perspective.
    - Knowledge of Smarteam and Catia V5 required.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6676
    Job Location: Savannah, GA
    Rate: $55.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Process Engineer - Technical Specialist II

    Description:
    UNIQUE SKILLS
    Lead engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development. Majority of the engineering projects and critical problems involve polymer matrix composites technology. Bachelor's degree in engineering or related field. Thirteen (13) years in polymer matrix composites. Experience generating FAA approved material test plans, equivalency test plans and reports required. Experience generating material and process specifications, performing statistical analysis of material qualification data and material allowables, test plans, and reports required. Experience performing root cause analysis and documenting results and recommendations. Experience with Project Management earned value system. Demonstrates a productive working relationship with material suppliers. Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology. Reviews and approves multi-discipline Smarteam workflows from an M&P perspective. Knowledge of Smarteam and Catia V5 required.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-639-82721
    Job Location: Southeast
    Rate: $55.00 to $63.00/Per Hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials, Process, and Physics Enigneer (Metals)

    Description:
    Defines requirements for materials, parts and processes used in the manufacture of products. Ability to lead production of specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Ability to lead development and qualification of new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts complex analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Ability to lead, design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under minimal supervision.

    SPECIFIC ASSIGNMENT QUALIFICATIONS…
    Assignment will support the Chinook program. Must have experience in applied knowledge of metallic materials in order to develop, select, or recommend materials that meet the environmental, regulatory, and design requirements of Rotorcraft products. Must be able to interpret material and process specifications in order to provide clarification and ensure specification intent is met. Must be able to review and or approve new and revised engineering documents/drawings by analyzing proposed changes in order to assess the impact on aircraft products and assemblies. (e.g., material specifications, process specifications, part standards, support specifications, manufacturing planning, industry/military standards) Apply engineering knowledge in order to write engineering specifications and develop projects to resolve problems and improve manufacturing processes (e.g., time, cost, etc.). Ensures application of best practices and identifies the need for enhanced processes, methods, and tools. Provide technical design support to program integrated product teams. Provide production shop support to disposition non-conformances and support program production needs. Provide technical support to suppliers as directed by program. Communicate with customers, teaming partners, subcontractors, and suppliers to exchange technical data. Must possess strong technical background in metallic aerospace materials and processes. Background should include knowledge of ferrous metallurgy, steel making processes, corrosion principles, Non-Destructive Evaluation Processes. Must be able to write technical papers summarizing results of investigations. Must be able to effectively communicate and be proficient with Information Technology tools.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Must be US Person for purposes of Export Compliance.
     
    Job Number: 36504
    Job Location: PA
    Rate: open
    Per Diem: split
    Overtime: possible
    Duration: 6+ months
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer / UG/NX CA

    Description:
    Job Title: Mechanical Design Engineer
    Job Number: 157711/4393
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract


    Description:

    Mechanical Design Engineer
    This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.
    Essential job functions: • Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
    • Contribute to the development of new product requirements through consulting with customers and sales personnel
    • Validate conceptual problem solutions through trade studies and by applying sound engineering principles
    • Perform engineering calculations related to sizing, performance, tolerance and assembly
    • Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
    • Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
    • Support programs with some travel (5-10%) and the participation in presentations to customers
    • Represent Moog in a manner consistent with its leading-edge technical reputation
    • Create reliable designs through a comprehensive experimental development test program
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 6+ years of design and development engineering experience
    • Proficient in current versions of NX/UG computer-aided design software
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
    • Team-oriented, with the desire to participate in and contribute to a high functioning team
    Scope:
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering
     
    Job Number: MB-4393
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer

    Description:
    Mechanical design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Checker

    Description:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations is preferred.
    Check out all our openings at www.hi-tecsolutions.com/jobs
     
    Job Number: 89389
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: P O BOX 965280
    2886 SANDY PLAINS RD

    City, State: MARIETTA, GA 30066
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer/Checker

    Description:
    Mechanical Engineer/Checker

    Location: Savannah, GA
    Pay Rate: $50-$55
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations are preferred.
     
    Job Number: 6896
    Job Location: Savannah, GA
    Rate: 50.00-55.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer MD

    Description:
    A highly motivated Mechanical Engineer seeking an opportunity to support flight test programs at NAS Patuxent River MD within the area of aircraft Hydraulics (HYD) and Landing Gear and Arrestments Systems (LAGs), Fuel Systems (FUEL), Power Thermal Management System (PTMS) or Electrical Power Systems (EPS). This position will require the candidate to train such that they can provide: test-planning, real-time control room monitoring, flight test data request, post flight data reduction & analysis, and on-aircraft troubleshooting of the subsystems of the JSF aircraft. Once trained in the primary discipline control room support, the candidate is expected to learn to troubleshoot these systems in the event of failures. It is expected that the candidate has the ability to learn continuously to expand aircraft system knowledge while working in a fast pace flight test environment. The candidate should be willing to support some evening and weekends in support of test activities and aircraft troubleshooting. The candidate must be willing to relocate to NAS Patuxent River, MD
     
    Job Number: DW - 0360
    Job Location: Patuxent River, MD
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: David Wilkinson
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer

    Description:
    Unique Skills:
    Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

    Principal Duties and Responsibilities:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-143
    Job Location: Savanah, GA
    Rate: $59 - $62
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer, Production & Test Aircraft Support (TS II)

    Description:
    UNIQUE SKILLS
    Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-638-82485
    Job Location: Southeast
    Rate: $59.00 to $62.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer

    Description:
    Metrology Engineer under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


    Interpret and consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. Assist in developing and documenting standards for the handling and utilization of metrology equipment. Create standardized inspection reports through the utilization of Metrologic software.

    Extensive knowledge of metrology equipment, software and current measurement techniques. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. Knowledge of Lean and/or Six Sigma principles.
    Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of portable precision measuring devices especially laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***
    Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Engineer

    Description:
    We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


    Varying Responsibilities:
    � Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
    � Evaluate certification methods of compliance.
    � Coordinate test and certification requirements.
    � Author flight test and ground test plans including test hazard analysis.
    � Participate in ground and flight tests as required.
    � Analyze test data and evaluate compliance with regulations.
    � Prepare certification test reports.
    � Occasional international travel may be required.
    � Author flight test and ground test specifications.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Prepare test reports.
    � Domestic and occasional international travel is required.
    Desired Qualifications:
    � APU experience, Fire Detection/Extinguishing, fuel feed and transfer, fuel logic system
    � Engine, particularly geared turbofan engine), FADEC and engine controls, cowl anti-ice, bleed air and fuel interfaces, oil system
    � Relevant work experience related to aircraft design, test, and certification.
    � Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
    � Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
    � Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
    � Consulting and direct hire opportunities available.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Installations DER/AR

    Description:
    Powerplant Installations DER/AR
    Savannah, GA
    $85-$135


    Unique Skills:

    The successful candidate should have current Part 25 FAA delegations in the areas of Powerplant installation including APU and Fuel distribution systems. Specific experience in component qualification test witness delegations and associated documentation is required.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6741
    Job Location: Savannah, GA
    Rate: $85-$135
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant/ECS/Fuel Engineer

    Description:
    Powerplant/ECS/Fuel Engineer - TS II

    Location: Savannah, GA
    Rate: $55.00 - $61.00/HR
    Long Term contract
    1st Shift


    Unique Skills:
    - Technical competency in the evaluation of fuel tank ignition risk assessments on a component level.
    - Competency in the application of fault and latent failure component design analysis.
    - M&P experience
    - Experience with Critical design configuration control limitations, inspections and maintenance procedures to prevent the development of fuel tank ignition sources. Increasing flammability exposure of aircraft fuel tanks.
    - Experience with identification of systems critical features where maintenance, repairs, or alterations may compromise CDCCLs.


    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 6365
    Job Location: Savannah, GA
    Rate: $55.00 - $61.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Designer

    Description:
  • Six (6) years experience in aircraft interior design or related field.
  • Proficiency of design principles, color theory, and textile and leather production techniques required.
  • Knowledge of FAA regulations relating to interior finish requirements required.
  • Possess working knowledge of Microsoft Office software.
  • Provide design guidance to studio designers.
  • Bachelor’s degree in Interior Design or related curriculum, or equivalent combination of education and experience to
    successfully perform the essential functions of the job.
  • Must be willing to travel extensively world wide on short notice.
     
  • Job Number: 24-150
    Job Location: GA
    Rate: DOE
    Per Diem: Split
    Overtime: Possible
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Engineer

    Description:
    Principal Engineer - Dynamics Testing

    Work as dynamics testing lead for team responsible for improving prediction of aircraft turbofan engine blade loss response, turbofan engine induction icing, Aircraft Auxiliary Power Unit response to vibration.

    Supports turbofan engine and Auxiliary Power Unit component test plan creation, instrumentation definition, instrumentation calibration. Works with the lab to get hardware measured, inspected, instrumented, and assembled for testing. Supports design input for test fixturing as needed. Supports testing to collect high sample rate strain gage and accelerometer data. Responsible for post-processing and plotting (time and frequency domain) of this test data and interpretation of results. Documentation of test findings in comprehensive reports. Communicates findings to team. Works with system dynamics modeling team to assimilate ideas and learning from testing and from team meetings into concise design practice documents. Works to capture and distill disparate ideas and data into a clear summary document.

    Preparation of aircraft gas turbine engine hardware for dynamics testing. Experienced with inspection, instrumentation and calibration, test fixturing, high sample rate data acquisition systems, post-processing and plotting of time and frequency domain vibration test data from accelerometers and strain gages. Able to review and interpret said data and summarize findings from test in clear and concise PowerPoint presentations. Dynamics background required. Rotordynamics and vibration test background preferred. Experience with turbofan engine fan blade loss and induction icing is desirable but not required. Able to work effectively on teams, capturing and documenting disparate information from testing and meetings, and compile these into clear design practice documents. Excellent verbal and written communication skills required. Able to work effectively and contribute on teams. Able to work independently and interface with focal points in testing lab to see hardware through testing.

    Basic Qualifications:

    • BS/MS degree in Mechanical Engineering or related technical field of study.
    • 8+ years experience in a related technical discipline.
    • Due to site requirements, candidate must be a US Citizen.


    OT to be billed at a straight time rate - please refer to the Addendum to Exhibit A – Aero E&T.
     
    Job Number: 17-00220
    Job Location: Phoenix, AZ
    Rate: 68.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Dave Mahabir
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Program Managers - Marana, AZ

    Description:
    STS AeroStaff Services is currently hiring Program Managers for open positions in Marana, Arizona.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Qualifications:

    • Must have A&P License or a Bachelor’s Degree.
    • Must have a minimum of 5 years’ related experience.
    • Someone out of college who is able to show analytical data and metrix on how the scope of the projects are going will be considered.
    • Must be able to show the VP of Operations on a drop of a dime: “Hours vs Cost vs Percentage of Aircraft Completed” (Will completion be on time? If not what are the projections? etc.)

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37227
    Job Location: Marana, AZ
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Engineers - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Quality Engineers for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Develops, directs, and accomplishes Quality Assurance programs that require the application of advanced Quality Assurance techniques and methods.

    Job Duties:

    • Performs Planning Work Instruction review prior to issuance to manufacturing, ensuring that Quality Assurance operations are correctly placed and drawing Quality Assurance requirements are adequately addressed.
    • Supports discrepancy report activity, along with calibration and tooling.
    • Directs quality assurance personnel assigned as inspectors in specific areas of responsibility.
    • Directs the solution of problems affecting the quality of completed aircraft. Assures that the planned courses of action are compatible with contractual commitment, established schedules, cost estimates, available facilities/equipment and other Quality Assurance considerations.
    • Develops Quality Assurance programs for new products/processes, outlining organization required, inspection techniques and methods, manpower requirements, and facility needs.
    • Analyzes inspection methods, tools, equipment, and facilities to determine basic requirements for control of quality at desired level.
    • Organizes, plans, and directs the development/administration/improvements of Quality Assurance functions in support of reliability programs.
    • Leads the activity of personnel assigned to this function in advanced phases of data analysis, correlation of failure reporting and processing methods and functional program study.
    • Performs assignments that require an ability to act independently with a minimum of supervision.

    Qualifications:

    • BS degree in Engineering or other related field of study preferred.
    • Experience in development and oversight of an FAA Part 21 approved Quality System preferred.
    • Experience, knowledge, or interest in Aerospace, new aircraft development, certification and/or manufacturing is preferred.
    • Strong analytical skills are required.
    • Experience, knowledge, or interest in Aerospace, new aircraft development, certification and/or manufacturing is preferred.

    Requirements:

    • Must be effective in working in an environment that requires the ability to: multi-task, adapt to frequently changing priorities, and to produce quality and timely deliverables within a setting where there are limited established procedures and protocol ambiguity may exist.
    • Excellent oral and written English communication skills.
    • Excellent computer Microsoft Suite application (Word, Excel, Access, Lotus Notes).
    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36337
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Inspector

    Description:
    Unique Skills:

    Candidates must have experience with aircraft mechanical systems installation with some experience with aircraft electrical systems installations preferred. Experience with Solumina, Smarteam, and Catia V5 preferred.


    Education and Experience Requirements:

    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:

    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Languages Required (in addition to English): No Selection
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Real Time Simulator Engineer with active secret GA

    Description:
    Job title: Real Time Simulator engineer
    Job Number: 158190/0319
    Location: Marietta, GA
    Compensation: 55-75/hr(DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:


    The selected candidates will become a technical staff member for laboratory development for F-22 and F-35 Pilot-in-the-loop simulators. .

    The specific assignment will be the development of real-time software products in Ada and C++ to be used in the F-22 and F-35 Labs.

    The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.

    These software models will be developed in primarily in Ada with some C++. A Bachelor Degree or Master's Degree in Electrical Engineering or Aerospace Engineering with significant software development experience and simulation / modeling experience are preferred for these positions.

    However, other technical disciplines (Physics, Math, Computer Science, Computer Engineering, etc.) will be considered along with relevant work experience for applicability to this position.

    Prior use of Ada and C++ software languages is required as well as direct experience with real-time software systems and environments.

    Excellent communication skills, computer skills, and computer architecture knowledge and domain knowledge in simulation and/or real-time embedded software system is desired.

    Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

    An active Secret clearance is required for this position.

    Development work uses C++, Ada, limited Python, Eclipse, DOORS, Dimensions, UML, and AdaCore GnatPro Studio (GPS).

    Skill/Experience/Education
    Mandatory:

    Experience required with developing real-time embedded software in C++ and/or Ada.

    Must have a proven ability to work well in a team environment.

    Excellent software development skills and experience

    Desired:

    Domain expertise in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for pilot-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars
    Object Oriented Analysis and Design using UML

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Software Development -- Ada Ability to develop software using the Ada 95 language 4-5 Years Yes
    Software Development -- C++ Ability to develop software using the C++ SW language 9-10 Years No
    Real-Time Software Development Ability to develop software in a real-time environment, understand the constructs and concepts of hard real-time programming 4-5 Years No
    Object Oriented Software Development ability to develop software using Object Oriented constructs and concepts 6-8 Years No
    Simulation Software Development Experience developing software for simulation, preferably aircraft and/or threat simulations 6-8 Years No
    Warfare Simulation Expertise Knowledge of electronic warfare concepts and how it applies in simulation 9-10 Years No
     
    Job Number: DW-0319
    Job Location: Marietta, GA
    Rate: 55-75/hr DOE
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Project Engineer

    Description:
    The Project Repair and Overhaul Engineering (GPE) position will perform an integral technical role that could be based in any of our factories or Service Centers. The position is part of the Global Repair & Overhaul Engineering Organization (GROE), Avionics-Electronics (AvEl) group.

    The position provides an individual with the opportunity to exercise their diverse technical and specific product knowledge to define, create and implement: rework, repair and evaluation of avionic products.


    Responsibilities:


    Repair and Overhaul (R&O) Project Engineering (GPE) primary responsibilities:
    Own and drive GROE Value Creation Process (VCP) and project tracking
     
    Productivity and Cost Reduction


    Actively seek out and identify areas to standardize the repair and test procedures for maximum savings and effectiveness across Service Centers.
    Provide on-going Make vs. Buy vs. Repair analysis & identify areas of focus.
     
    Technology & Implementation
    Drive technology implementation projects to deliver operational improvements
    Research new and existing technologies for potential application

    Planning and Program Management


    Liaison coordination between site repair development engineering, site quality, test engineering, product engineering and FAA DER for substantiation and authorization of engineering documentation.
    Program manage repairs and projects using workflow tools and VCP
    Develop and support M&PM strategies & participate on CSB's as required.
     
    Basic Qualifications:
    A Bachelor's Degree in Engineering, Supply Chain, Business, or Project Management.
    Must be US Citizen or Permanent Resident due to ITAR/Export Requirements.



    Additional Qualifications:
    High degree of Microsoft Office familiarization
    PMP Certification
    Knowledge of FAA regulations & processes on avionics and related software.
    Understanding of FAR 21 (OEM-Factory) and FAR 145 (Repair Station).
    Understanding of specific regulations DO 178, DO 254 and DO 160.
    Understanding and compliance to export regulation and ITAR information.
    Digital/analog component systems knowledge.
    Knowledge of Interchangeability and Configuration Management.
    Awareness of product test requirements and limitation of test equipment to replicate aircraft.
     
     
    Job Number: 17-00279
    Job Location: Phoenix, AZ
    Rate: 50.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: NESCO RESOURCE
    Attention: Dave Mahabir
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sim & Software Engineer-Tech Spec 1

    Description:
    Sim & Software Engineer-Tech Spec 1
    Savannah, GA
    Rate: $53-$58


    Unique Skills:

    Areas of knowledge sharing, evaluating, and delivering results will be primarily in the following areas (but not limited to): - Matlab/Simulink experience modeling for hardware in the loop, real time aircraft systems - Simulation model/platform updates or improvements - Rectifying lab issues through troubleshooting, evaluation and solution development and implementation - Responsible for satisfying lab customer needs/requirements - Scripting and GUI development - Research and development in the areas of simulation and software - Designing software Standard Operating Process and Work Method - Reading electrical and simulation drawings - Integrating various I/O types (analog, discrete, data bus, etc) into the simulation platform - Understanding standard aircraft industry I/O protocols (ARINC 429, 664, 485, 717, etc) - Aircraft systems HWIL and integration into a real time simulation environment - Real Time simulation principles


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6774
    Job Location: Savannah, GA
    Rate: $53-$58
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad Becker
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sim & Software Engineering Consultant

    Description:
    Sim & Software Engineering Consultant
    Savannah, GA
    $58.00-63.00/HR
    Long Term Contract

    Unique Skills:
    Job Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

    Education and Experience Requirements:

    Languages Required (in addition to English): No Selection
     
    Job Number: 6706
    Job Location: Savannah, GA
    Rate: $58.00-63.00/Hr
    Per Diem: $110/Weekly
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Simulation & Software Engineer

    Description:
    Simulation & Software Engineer
    1. Matlab/Simulink experience modeling real time aircraft systems 2. Aerospace background with avionics lab testing experience 3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation 4. Experience with high level programming or scripting language such as C/C++, Python 5. Knowledge of data protocols used in aerospace 6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI,Dspace,ADI) 7. Flight and/or aircraft system lab HIL simulation experience 8. Ability to work independently and self-govern priorities in accordance with lab customer needs 9. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret / flight control analysis software skills required CA

    Description:
    Lockheed Martin Aero 0355
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    1st shift
    Non exempt

    Description:

    This Flight Controls lead position is a technical position performing complex guidance and control design and analysis for LM Aero - Advanced Development Programs.

    Responsible for guiding the design, development, integration and test of flight control laws.

    Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration, and test of vehicle systems.

    Prior experience in hypersonic flight regime is highly desired.

    Must have a good understanding of aircraft stability, control and aerodynamic characteristics.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired.

    The selected candidate will represent the program as a technical subject matter expert within the field of flight controls and will interact with senior leadership, customer and suppliers at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance with ability to obtain SAP/SAR access

    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering.

    Minimum 10+ years of hands-on experience in the design of flight control laws (algorithms & software) for aviation applications.

    Proficient with simulation/control laws (6-degree-of-freedom)development tools, aircraft/system modeling and Matlab/Simulink software.

    Desired:

    Demonstrated experience in all phases of flight control laws design life cycle - from requirements development, conceptual design, detailed design, code generation, software verification & validation, ground test and flight test phases.

    Knowledge and experience in Guidance and Control Algorithm design and implementation for high speed weapons.
    Familiarity with flight worthy software development process.
     
    Job Number: SW-0355
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0354
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non exempt
    1st shift


    Description:

    This position supports Guidance, Navigation and Control (GN&C) efforts including day to day coordination between the program teams responsible for these combined efforts. Responsibilities also include integration and coordination with software design, implementation, and systems integration teams. Tasking also includes reporting to Technical Management and Cost Account Manager responsible for subsystem architecture and vehicle management (which includes software, guidance and control design and analysis). Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration and test. Requires knowledge and experience in Navigation design and implementation and knowledge and experience in seeker/radar integration into Navigation solution and Kalman filter design, trades and performance.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. Prior experience in hypersonic flight regime is highly desired. The selected candidate will participate in addressing GN&C direction with senior leadership and the customer at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance
    MATLAB/Simulink
    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering and several years of related experience. Hands on experience in the design of flight control laws. Must have a good understanding of aircraft stability, control, and aerodynamics.
    Desired:

    Proficient with 6-degree-of-freedom simulation/control laws development tools, aircraft/system modeling and Matlab/Simulink software
     
    Job Number: DW-0354
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineers - Many Needed - HOT****

    Description:
    **Must have active secret clearance
    **C++
    **Degreed
    Job Description: Boeing Military Aircraft - Mission Systems needs experienced software engineers to assist with the development of real-time software systems including: developing and maintaining code and integrating software components into a fully functional software system and assisting with testing. Activities may also include developing, documenting and maintaining complex architectures, requirements, algorithms, interfaces and designs for software systems, as well as developing software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met.

    Email resume to: Mary Ann McCarthy mmccarthy@pdstech.com
     
    Job Number: Boe-Soft
    Job Location: St. Louis, MO
    Rate: 70.00-85.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineers - Real Time Embedded

    Description:
    **Must have Active Secret clearance
    *Experience required with developing real-time embedded software in C++ and/or Ada.
    *Object Oriented Analysis and Design using UML
    *The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars.
     
    Job Number: Lock-Soft
    Job Location: Marietta, GA
    Rate: $70.00-$75.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PDS TECH COMMERCIAL, INC
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    St. Louis, MO - Design Engineers Needed with Active Secret Clearance

    Description:
    7 Design Engineers Needed with Active Secret Clearances.

    MUST have Active Secret Clearance with investigation completed or refreshed within the last 5 years.

    Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components. Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers).
    Develop design data for aircraft structural components, systems components, assemblies and installations.
    Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
    Mentor associate structural engineers.
    Maintains a current knowledge of developments in aircraft structures.
    Participates in projects to improve productivity and financial performance.
    Perform other job duties as assigned.

    Qualifications:
    Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience.
    Minimum 8 years engineering experience.
    Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000).
    Experience with Team Center & Enovia is a plus.
    Attention to detail of completed designs is critical. Ability to work with cross functional teams required.
    Proficient at producing high quality designs within schedule and budget.
    Must be able to work in team environment.
    Must be able to work overtime and weekends as required.
    Required:
    Must have Active Secret Clearance with investigation within the last 5 years
    Composite experience

    The Structures Company is an AA/EOE.
     
    Job Location: St. Louis, MO
    Rate: $60-70/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    St. Louis, MO - Stress Engineers Needed w/Active Secret Clearance

    Description:
    10 Stress Engineer Openings. MUST have an Active Secret Clearance (investigation refreshed/completed within the last 5 years).

    Stress Engineers will develop, analyze, design and establish test procedures for airframe structure for a variety of internal and external customers
    -Design and analyze both composite and metallic airframe structures.
    -Support the design and development of 3D CATIA datasets and/or 2D drawings

    Preferred Qualifications:
    -Composites and Metallic experience
    -Patran or Nastran
    -Previous Large Aircraft or Fighter Jet experience is a plus.
    Required:
    -MUST have active Secret Clearance,investigation within the last 5 years.
    -MUST be a US citizen
    -Bachelor's degree in Engineering from an ABET accredited program.

    Basic Qualifications:
    -Bachelor's degree in Engineering from an ABET accredited program.
    -8+ years metals and/or composite analysis experience in an aero-structure design/manufacturing environment.
    -Strong computer skills with knowledge of Microsoft Office products. Experience with CATIA V4/V5 a plus.
    -Experience with FEM (Finite Element Method) packages which includes Nastran / Patran and /or other packages such as ANSYS.
    -Experience with hand calculations and template use/applications
    -Willingness to travel in support of the development effort

    The Structures Company is an AA/EOE
     
    Job Location: St. Louis, MO
    Rate: Above Market Rate
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stability and Control Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: FS/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer - Flight Controls

    Description:
    This position requires 10+ years of aircraft/aerospace stress analysis with experience with flight controls/mechanical systems.
    MUST be US Persons.

    Qualifications:
    Aircraft flight controls/mechanical systems
    -Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
    -Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
    -Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
    -Experience with free-body diagrams and classical stress analysis techniques
    -Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP a plus
    -Rapid prototyping experience a strong plus
    -Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    -Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    -Experience with manufacturing-based ERP systems, such as Oracle, is a plus
    -Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
    Educational Requirements-
    Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

    The Structures Company is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: $70-85/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: January 2017
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Stress Engineer with Landing Gear Experience

    Description:
    This position requires 5+ years of aircraft/aerospace stress analysis experience with Landing Gears.
    MUST be US Persons.
    Femap experience preferred but not required.

    Qualifications:
    Aircraft Landing Gears
    -Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
    -Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
    -Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
    -Experience with free-body diagrams and classical stress analysis techniques
    -Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP a plus
    -Rapid prototyping experience a strong plus
    -Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    -Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    -Experience with manufacturing-based ERP systems, such as Oracle, is a plus
    -Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
    Educational Requirements-
    Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

    The Structures Company is an AA/EOE.
     
    Job Location: CA
    Rate: $75-85/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural & Payload Design Engineer 4

    Description:
    Structural & Payload Design Engineer 4
    Location: Mesa, AZ
    Duration: 12 months


    Description:
    Skill Code: 647-Structural Design

    Job Description:
    Exploratory Requisition
    Contractor Request for a highly experienced and skilled airframe (AF) design engineer (SMC 647).

    Must have experience, knowledge and excellent skills with;
    - Catia v5 3D CAD/CAM tool, tool suite with MBDs, IRM, ARMs, CARMs
    - BCA-Commercial 787 Enovia PDM tool
    - 787 BCA release processes and procedures.

    Develops, integrates and document structural platform designs. Develop, maintain and modify structure and AF component designs, using 3-D Catia v5 Computer Aided Design tools, tool suite and other design methods to provide product definition to other engineering groups such as; other designers, stress, ME, Production operations, suppliers and internal/external customers.
    Perform, integrate, research, review earlier designs and validate and verify structures and AF components meet requirements and specifications.
    Manages supplier, development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.
    Investigates and research released designs, and problems on earlier released designs to ensure they meet requirements. Work under minimal general direction.

    Education / Experience:
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    Report to work instructions after obtaining badge:
    Additional Comments:
    Absolutely must have the following BCA (commercial) skills and experience no exceptions
    - 787 CATIA v5
    - 787 IVT (Integration Visualization Tool)
    - 787 Structure Role in ENOVIA LCA
    - 787 REDARS EID

    Designer must be very proficient in the following:
    - CATIA v5 Complete Model Base Definition
    - CATIA v5 FT&A workbench
    - CATIA v5 Composite workbench (CWB)
    - CATIA v5 Generative Shape Design
    - CATIA v5 Part Design
    - CATIA v5 Assembly workbench

    Must be highly experienced on 787 tools a processes.
    - Have designed composite parts based on 787 modeling standards.
    - Have designed Installation Requirements Models based on 787 modeling standards.
    - Have built component assemblies based on 787 modeling standards.
    - Have created release actions, signoff actions and has released parts on the 787 program.
    - Have used and feels comfortable working to the 787 Product Definition Data for Review and Approval Checklists.

    Must have experience in following items:
    - Able to check dataset to the non-technical modeling standards.
    - Experienced using auto fastener.
    - Excellent understanding of ENOVIA effectivity (creating and cutting).
    - Understands the difference in designing in fuselage integration vs designing in a specific section regarding the plug-offset of different (-) dash number Aircraft (787-8, 787-9, 787-10).
    - Be able to applying attribute values to ENOVIA parts and documents.
     
    Job Number: 22916-1
    Job Location: Mesa, Az
    Rate: Doe
    Per Diem: Yes
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural / Stress Engineer

    Description:
    JSG is seeking a Structural Ground Test Engineer for a 2- year contract opportunity in Stratford, CT!!!

    Description:
    Structural Ground Test (GT) Engineers are responsible for projects with significant scope and complexity covering the structural aspects of Ground Testing helicopter components and systems.
    Test programs typically involve full scale fatigue and static evaluations of dynamic components, airframe static tests, and airframe shake tests.
    A large part of our function is fatigue substantiation which correlates laboratory fatigue test strength data with measured flight test loads and the customer's mission spectrum to produce dynamic component retirement times and/or inspection intervals that reduce the chance of catastrophic fatigue fracture to an extremely remote possibility.
    To that end, Structural GT engineers are in charge of the entire fatigue test program including detailed test planning, facilities, test specimens, instrumentation, test conduct, post-processing data, substantiation analysis using customized software tools, and generation of test plans and reports.

    Tasks also include supporting and establishing operating limitations for both flight test programs and fielded aircraft.
     
    Job Number: 353698
    Job Location: Stratford, CT.
    Rate: Open
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer 2

    Description:
    Please call or email Holly Herrera at hherrera@iconma.com OR 253-455-3711.

    Structural Analysis Engineer 2

    Location: Mesa, AZ
    Duration: 3 Months

    Description:
    Work experience
    - Experience in modeling and analysis is required.
    - Knowledge of fundamentals of vibration engineering and finite element methodology is required.
    - Familiarity with NASTRAN and PATRAN for dynamic analysis is preferred.
    - Experience in engineering testing is a plus.

    Primary Responsibilities:
    - Generate dynamic NASTRAN models of aircraft components.
    - Run dynamic analysis, identify modal shapes and frequencies
    - Perform on ground dynamic testing.
    - Use test results to modify/verify analysis.
    - Use model to estimate vibration induced deflections and stresses
    - Identify locations for in-flight vibration data acquisition
    - Monitor flight & gunfire testing when vibration data is collected
    - Evaluate the soundness of vibration data.
    - Reduce vibration data and perform spectral analysis.

    Education:
    - B.S. or M.S. degree in aerospace or mechanical engineering or equivalent technical training.

    Skill Code:
    698-Loads and Dynamics Structural Anal

    Skills:
    Category Name Required
    Software Skills Nastran Yes
    Software Skills Patran Yes

    Education / Experience:
    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.

    Required:
    Bachelor or Master degree from an accredited course of study, in engineering, com
     
    Job Number: 24112-1
    Job Location: Mesa, AZ
    Per Diem: Yes
    Overtime: Yes
    Duration: 3 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: ICONMA LLC
    Attention: Holly Herrera
    Address: 859 STEPHENSON HWY
    City, State: TROY, MI 48083
    Phone: 843/955-9221
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer 2

    Description:
    Job Description:
    Work experience
    • Experience in modeling and analysis is required.
    • Knowledge of fundamentals of vibration engineering and finite element methodology is required.
    • Familiarity with NASTRAN and PATRAN for dynamic analysis is preferred.
    • Experience in engineering testing is a plus.

    Primary Responsibilities:
    • Generate dynamic NASTRAN models of aircraft components.
    • Run dynamic analysis, identify modal shapes and frequencies
    • Perform on ground dynamic testing.
    • Use test results to modify/verify analysis.
    • Use model to estimate vibration induced deflections and stresses
    • Identify locations for in-flight vibration data acquisition
    • Monitor flight & gunfire testing when vibration data is collected
    • Evaluate the soundness of vibration data.
    • Reduce vibration data and perform spectral analysis.

    Education / Experience: 2 or more years of experience and a B.S. or M.S. degree in aerospace or mechanical engineering or equivalent technical training.
     
    Job Number: 24087
    Job Location: Mesa, AZ
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 3 mos
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Michelle Fox
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer with active secret / NASTRAN PATRAN FEA Catia CA

    Description:
    Job Title: Structural Analysis Engineer
    Job Number:156325/0316
    Location: Palmdale, CA
    Compensation: Rates 85-95/hr
    Assignment Length: 12+ month contract
    Active Secret security clearance with an investigation less than 5 years ago
    Non Exempt

    Job Description:
    This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.


    Mandatory Skills:
    --Active Secret security clearance with an investigation less than 5 years ago.--
    --Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structures--Experience performing stress analysis by hand calculations--Experience building complex finite element models for stress analyses--Knowledge of aircraft stress analysis methods and basic structural design criteria--Familiarity with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes


    Desired Skills:
    Proficiency with SLIM/TMP VIsion, Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows and LINUX/UNIX operating systems, and computer programming experience in FORTRAN, VBA, C/C++ and PERL.




    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    PATRAN Proficiency in FEA pre-processing software PATRAN 4-5 Years Yes
    CATIA V5 Proficiency in CAD software CATIA V5. 0-3 Years No
    NASTRAN Proficiency in FEA solver NASTRAN 4-5 Years Yes
    Stress Hand Calcs Proficiency in Stress analysis using hand calculations 4-5 Years Yes
     
    Job Number: DW-0316
    Job Location: Palmdale, CA
    Rate: 85-95/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Analysis Engineer with active secret / Nastran Patran vibro-acoustic CA

    Description:
    Job Title: Structural Analysis Engineer
    Job Number: 156786/0326
    Location: Palmdale, CA
    Compensation: 85-95/hr
    Assignment Length: 12 month contract



    Description
    This position requires an Aircraft Vibro-Acoustic Analyst to use their technical expertise to perform analysis aircraft vibration issues. The candidate will have a complete understanding and wide application of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.

    Skill/Experience/Education
    Mandatory:

    --Active Secret security clearance with an investigation less than 5 years ago.--
    --Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structural vibrations
    Desired:

    Proficiency with FORTRAN, VBA, C/C++ and PERL.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    MSC Nastran Proficiency in MSC Nastran 4-5 Years Yes
    MSC Patran Experience with Patran 4-5 Years Yes
    Matlab Experience using Matlab to analyze vibro-acoustic data 4-5 Years Yes
     
    Job Number: DW-0326
    Job Location: Palmdale, CA
    Rate: 85-95/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Design Engineer

    Description:
    Unique Skills:
    Must be proficient in CATIA v5 (10,000+ hours or 5 years) including CATIA v5 drawing package. Must have minimum 10 years of Structural Design experience working with aircraft primary structure parts. Must have experience in green aircraft structural modification.

    Experience/Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
     
    Job Number: 24-135
    Job Location: Savannah, GA
    Rate: $60-$63/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Joe
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Design with active secret / Catia V5 URGENT CA

    Description:
    Job Title: Structural Design
    Job Number:156326/0317
    Location: Palmdale, CA
    Compensation: Rates 65-75/hr
    Assignment Length: 10+ month contract
    Active Secret Clearance with investigation less than five years ago
    Non Exempt
    (Start date in March 2017 after obtaining Special Program Clearance)



    Job Description:
    Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.


    Mandatory Skills:
    --Active Secret security clearance with an investigation less than 5 years ago.--Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access--Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the analysis of aircraft structures--Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes


    Desired Skills:
    Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    CATIA V5 Proficiency in CAD software CATIA V5. 4-5 Years Yes
    Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes
     
    Job Number: DW-0317
    Job Location: Palmdale, CA
    Rate: 65-75/hr max
    Duration: 10 months +
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Designer

    Description:
    Structural Designer must be proficient in CATIA v5 (10,000 hours or 5 years), 3D Model Based Definition (3D MBD) and Geometric Dimensioning and Tolerancing (GD&T); must have minimum 10 years of Structural Design experience working with aircraft primary structure parts; must have a strong understanding of design and manufacturing processes involved for both metallic and composite parts. Prior work experience with aircraft and SmarTeam PLM system desired. Prior work experience with wing primary structure preferred. Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yrs. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Lab Technician - 1st Shift

    Description:
    Johnson Service Group seeking a Ground Test Structural Lab Technician for Stratford Ct.

    1st Shift

    Duties:
    Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs.

    Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred.

    Must be able to read and interpret engineering mechanical drawings and fluid power schematics.

    Must be able to assist with the buildup and monitoring of engineering laboratory facilities.

    Must be able to assemble required fixtures and facility hardware.
     
    Job Number: 352695
    Job Location: Stratford, CT
    Rate: open
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Stress Analysis Engineer II (AZ) - Loads & Dynamics

    Description:
    Work experience
    • Experience in modeling and analysis is required.
    • Knowledge of fundamentals of vibration engineering and finite element methodology is required.
    • Familiarity with NASTRAN and PATRAN for dynamic analysis is preferred.
    • Experience in engineering testing is a plus.

    Primary Responsibilities:
    • Generate dynamic NASTRAN models of aircraft components.
    • Run dynamic analysis, identify modal shapes and frequencies
    • Perform on ground dynamic testing.
    • Use test results to modify/verify analysis.
    • Use model to estimate vibration induced deflections and stresses
    • Identify locations for in-flight vibration data acquisition
    • Monitor flight & gunfire testing when vibration data is collected
    • Evaluate the soundness of vibration data.
    • Reduce vibration data and perform spectral analysis.

    Education:

    Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.
     
    Job Number: StressIIAZ
    Job Location: Mesa, AZ
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 3+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Stress Analysis Engineer III / IV (MO) ACTIVE SECRET CLEARANCE

    Description:
    SEVERAL OPENINGS IN ST. LOUIS AREA

    ACTIVE SECRET CLEARANCE REQUIRED TO START.

    Stress contract engineer opportunities exist within our Phantom Works division to support development of new, military aircraft. A minimum of 10 yrs. relevant, aerospace strength/stress experience is required on either airframe or subsystems. Design release, stress support experience is strongly preferred. PATRAN/NASTRAN post-processing experience is preferred along with basic hand analysis and/or Common Structures Workstation (CSW) sizing. Experience working with NX Engineering models in Teamcenter Engineering is preferred. Applicant expected to work under minimal supervision.

    This position requires an active U.S. Security Clearance, with supporting background investigation < 5 yrs. old. Bachelor of Science degree (or higher) in either Aerospace/Aeronautical, Civil, or Mechanical engineering from an ABET accredited program is also preferred. We also offer full medical, dental, vision, and 401k, including a bonus plan. We can also give you per diem if you qualify.
     
    Job Number: StressSECRETmo
    Job Location: Berkeley, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structures/Dynamics Flight Test Engineer

    Description:
    DESCRIPTION
    Position will commence in WPB Florida and will migrate to the Patuxent River Naval Air Station in Maryland in mid-2017.

    SPECIALIZED SKILLS REQUIRED
    ONSITE ACTIVITIES WITH THE TEST AIRCRAFT REQUIRED.
    Plan, prepare, conduct and report on structures and dynamics flight tests. Key responsibilities within Structures/Dynamics Flight Test include initial envelope expansion and development tests, flight loads/strain and vibration surveys, dynamic stability tests and structural oversight of tests performed by other disciplines. The test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data. These details are written into published test plans. The test conduct function involves briefing flight and ground crews and providing real-time telemetry monitoring of critical parameters. Large volumes of gathered flight test data are processed and analyzed to support development and/or certification/qualification. Test results, conclusions and recommendations are published in reports.

    Candidate must have at least 10 years of experience in aircraft structures or dynamics (applied or theoretical), with 5 years of experience in flight test. Rotary wing experience preferred.

    NOTE
    This position involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), technical customers, qualification or certification authority representatives, and subject matter expert design/test engineers. Good interpersonal skills are imperative.
     
    Job Number: 16-580-362
    Job Location: Southeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structures/Dynamics Flight Test Engineer - RM

    Description:
    Johnson Service Group is seeking a Structures/Dynamics Flight Test Engineer for a 2-year contract position in West Palm, FL!

    Please note: Position will commence in West Palm Beach, Florida and will migrate to Maryland in mid-2017.

    Description:
    � Onsite activities with the test aircraft required.
    � Plan, prepare, conduct and report on structures and dynamics flight tests.
    � Key responsibilities within Structures/Dynamics Flight Test include initial envelope expansion and development tests, flight loads/strain and vibration surveys, dynamic stability tests and structural oversight of tests performed by other disciplines.
    � The test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
    � These details are written into published test plans. The test conduct function involves briefing flight and ground crews and providing real-time telemetry monitoring of critical parameters.
    � Large volumes of gathered flight test data are processed and analyzed to support development and/or certification/qualification.
    � Test results, conclusions and recommendations are published in reports.
    Candidate must have:
    � At least 10 years of experience in aircraft structures or dynamics (applied or theoretical), with 5 years of experience in flight test. Rotary wing experience preferred.
    Note:
    � This position involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), technical customers, qualification or certification authority representatives, and subject matter expert design/test engineers.
    � Good interpersonal skills are imperative.
     
    Job Number: 352704
    Job Location: West Palm Beach, FL
    Rate: Open
    Per Diem: yes
    Overtime: yes
    Duration: 2 years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Subsystems Engineer with active secret / Catia V5 CA

    Description:
    Job Title: Subsystems Engineer
    Job Number: 157859/0372
    Location: Palmdale, CA
    Compensation: 65-75/hr max
    Assignment Length: contract
    Active Secret security clearance with an investigation less than 5 years ago


    Description
    Candidate will be responsible for the structural design, installation, and integration for various structure and subsystems on a unique aircraft. Engineer must be capable of taking structural design and systems/subsystems requirements and developing installation designs including line replaceable units to antenna separation, bonding requirements, hydraulic, fuel, auxiliary power, and environmental control system tubing and harness routing.. Candidate will be completely responsible for various subsystem LRU's integration into the airplane for installation. They will be expected to identify and coordinate with the affected disciplines from Avionics, Software, Electrical, Structural Design, Material and Process Engineering and develop complete design solutions. Required to create detail designs including 3D lay-outs, assemblies, and installation drawings using CATIA V5. Must create separate detail parts lists to accompany drawings.

    Required Skills
    CATIA V5

    Desired Skills
    GD&T (Geometric Dimensioning and Tolerancing)

    Skill/Experience/Education
    Mandatory:

    --Active Secret security clearance with an investigation less than 5 years ago.
    --5 or more years experience in the design of aircraft primary or secondary structures.
    --Proficient with CATIA V5.
    --Must be a US Citizen or legally authorized to work in US as a permanent resident. This position is located at a facility that requires special access.
    --Understanding of drawing practices, material properties, and manufacturing processes.
    Desired:

    --Bachelor or above Degree in an Engineering Technical discipline.
    --Experience with composite structure design or manufacturing.
    --Experience with hand stress analysis for initial part layout.
    --Experience with GD&T (Geometric Dimensioning and Tolerancing) .
    --Excellent writing and communication skills.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Catia V5 Proficient 4-5 Years Yes
    Structural Design Proficient with aircraft structural design of composite and metallic part 4-5 Years Yes
    Subsystem Design Proficient with installation of aircraft subsystems. 4-5 Years Yes
     
    Job Number: DW-0372
    Job Location: Palmdale, CA
    Rate: 65-75/hr max
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Supplier Development Lead

    Description:
    JSG is seeking a Supplier Development Lead for the Air Vehicle Design and Manufacturing for our client in Stratford, CT for a 2-year contract!!!

    The Air Vehicle Design and Manufacturing Engineering (ADME) Core Services Group supplements ADME�s technical expertise with best-in-class project management capability, enabling our functional org to excel in meeting its business objectives. The Supplier Development pillar of Core Services focuses on providing expertise in the development, management, and execution of processes and metrics for ADME�s Integrated Product Teams (IPTs), ensuring the parts and assemblies we design actually get built and delivered according to critical program objectives.

    Job Description:

    New position on the Combat Search and Rescue Helicopter (CRH) will provide Engineering leadership in managing supplier Non Recurring Engineering (NRE) related parts.
    The position will require an individual with organizational skills bringing leadership and direction to a multi-disciplined team including Supply Management, Operations, Quality, Program Management, and all of our NRE-related Suppliers.
    The Supplier Development Lead is responsible for coordinating tooling and part fabrication, RFQ/purchase order placement, and part delivery to the aircraft to support the CRH program�s aircraft build and delivery schedule.
    Specific responsibilities include :

    Providing Engineering oversight and support of the supplier selection process -Working with suppliers to develop a schedule that�s achieves program objectives/milestones.
    Generate and maintain metrics to track RFQ placement and supplier response, negotiations, PR and PO issuance and part delivery -Conduct regular briefings to program management, functional engineering and the external customer including presentation of metrics -Monitoring and reporting supplier progress for input to the program Integrated Master Schedule (IMS) -Preparing Change Requests to detail plan parts as they are put under Purchase Order agreement -Allocating part actuals to the Integrated Master Schedule -Leading recurring meetings with key suppliers to review progress and resolve issues -Work between Engineering POCs and suppliers to respond to questions and help resolve technical issues associated the Statement of Work (SOW) -Statusing Earned Value of parts and providing variance analysis/reporting as required
    Team building and communication skills are key to the success of this position. Travel to key supplier facilities may be required.
    Earned value experience, Lean (Six Sigma/ACE) and aerospace experience, with specific knowledge of dynamic components, is preferred.
    Experience with tools including SAP, Primavera, and wInsight is a plus.
    Bachelors in Engineering or Business is required.
     
    Job Number: 352683
    Job Location: Stratford, CT.
    Rate: 44.75/hr
    Per Diem: If Qualified
    Overtime: Possible
    Duration: 2 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer

    Description:
    The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning




    Required skills:

    • High proficiency level with Matlab/Simulink is required
    • Experience modeling complex systems, aircraft flight controls context is required
    • Experience with Stateflow is desired
    • Experience with dSpace AutomationDesk/ControlDesk (programming) is desired
    • Python coding experience is desired
    • Experience with IBM Rational DOORS for requirements management is desired
    • Experience with Atlassian JIRA and Subversion for change control is desired




    Education:

    ·Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
     
    Job Number: 51010
    Job Location: Buffalo, NY
    Rate: up to $70/hr
    Per Diem: Possible
    Overtime: Possible
    Duration: 6
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Cynthia Lashley
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Additionally... V22 Fleet Support Systems Engineer to interface with the customer. Makes customers and their needs a primary focus of one's actions; develops and sustains productive customer relationships; uses information to understand customers' circumstances, problems, expectations, and needs; periodically becomes involved in sharing information with customers to build their understanding of issues and capabilities; considers how actions or plans will affect customers; responds quickly to meet customer needs and resolve problems; assists higher graded employees and/or project team leaders in implementing ways to monitor and evaluate customer concerns, issues, and satisfaction and to anticipate customer needs. Intermediate level proficiency MS Word, MS Excel and MS PowerPoint.

    Candidate must state level of proficiency (beginner, intermediate or advanced) in the following required skills:
    Software Skills MS Excel Yes Intermediate
    Software Skills MS PowerPoint Yes Intermediate
    Software Skills MS Word Yes Intermediate

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
    Additionally...Candidates must have a four year BS degree in an engineering discipline, computer science, mathematics, physics or chemistry. Has a focused aircraft structures background with experience in solving problems related to corrosion prone areas and the ability to offer design solutions or process changes to mitigate aircraft corrosion. Must be US Person for purposes of Export Compliance.
     
    Job Number: 36675
    Job Location: PA
    Rate: 50/hr
    Per Diem: split
    Overtime: possible
    Duration: 6 months
    Start Date: 1/2017
    Input Date: 11/14/2020
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer III (PA)

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.
    Additionally...
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Preferred product knowledge and technical acumen in developing and analyzing rotorcraft systems for safety and airworthiness in accordance with the specific customer operational and maintenance context (preferably military).
    Experience in developing and conducting a compliant safety management program in accordance government and industry standards to include MIL-STD-882, SAE ARP 4761 and SAE ARP 4754, DO-178B, DO-254 and Def Stan 00-56.
    Experience developing Safety Management Plans and applying aviation related system safety analysis methods to include System Safety Risk Assessments, Fault-tree Analysis (FTA), Master Minimum Equipment List (MMEL) development, Functional Hazard Assessment ( FHA), Operation & Support Hazard Analysis (O&SHA) Safety Assessment Report (SAR), and Software Safety Assessment Report.
    Experience with rotorcraft product and/or product support—a must.
    Preferred- System Safety experience, aerospace experience, aircraft systems, or software. Aerospace experience is desired but not required. Candidates with System Safety experience from other industries will be considered.
    Required Intermediate level Proficiency -Word, Excel and PowerPoint

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

    Additionally... BS or MS Engineering Degree or Technical Degree in Systems, Electrical, Aerospace, Mechanical, Software (Computing). Engineering, or related engineering degree from an ABET accredited school is highly desirable.
     
    Job Number: SystEngPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer III (PA) - ACTIVE SECRET

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    Additionally....
    One or more years experience with System Security Engineering. Required Advanced -Systems Security Engineering (SSE). Candidate must have experience with developing and implementing system security engineering tasks related to assessing threats, vulnerabilities and countermeasures for military aircraft systems.
    Should be familiar with system security domains (e.g., information assurance, anti-tamper, intrusion detection, software protection, software assurance, communications security, encryption and key management, network security, reverse engineering, countermeasures, certification and accreditation, special security endorsement) and industry and government guidance and regulations, such as DoD Information Technology Security Certification and Accreditation Process (DITSCAP), which engineers apply to produce secure systems.

    Preferred DOORS (Dynamic Object-Oriented Requirements System) Rational database experience
    Preferred DXL (DOORS eXtension Language) Code experience
    Prefer RPE (Rational Publishing Engine) experience
    Required Intermediate Proficiency - Word, Excel and PowerPoint

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
    Additionally.. Must have a BS in engineering, computer science, mathematics, or physics. Aerospace experience is desired, but not required.
     
    Job Number: SystEngPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 4+ months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer III (PA) - ACTIVE SECRET

    Description:
    Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions. Evaluates customer and /operational needs to define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces. Performs various analyses to optimize total system of systems and/or system architecture. Performs analyses for affordability, safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialties quality factors into a preferred configuration to ensure mission success. Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes. Resolves cross-functional technical issues.

    _Skills Mandatory Advanced -Systems Security _Engineering, DOORS database administration,.
    Advanced skills DOORS
    _Intermediate skills for Word, Excel, PowerPoint
    Mandatory- Candidate must have experience with developing and implementing system security engineering tasks related to assessing threats, vulnerabilities and countermeasures for military aircraft systems.
    _Familiarization with Anti-tamper, cyber security, supply chain risk management, and system security engineering tasks is required.
    _Candidate must have experience as a DOORS database administrator.
    _Capability to write scripts in DOORS is highly desired.
    Desired skills- Familiarization with Rhapsody is desired. Experience with defense acquisition process is highly desired.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
    Must have a BS in engineering, computer science, mathematics, or physics.
     
    Job Number: SystIIIpa
    Job Location: Ridley Park, PA
    Rate: up to $50/hour
    Per Diem: Yes
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineer with active secret MD

    Description:
    Lockheed Martin Aero 0360
    Job Title: Systems Engineer
    Location: Patuxent River, MD 20760
    Compensation: 40-50/hr
    Assignment Length: 10 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:

    A highly motivated Mechanical Engineer seeking an opportunity to support the JSF CV and STOVL flight test programs at NAS Patuxent River MD as part of the Utilities and Subsystems (U&S) organization within the area of aircraft Hydraulics (HYD) and Landing Gear and Arrestments Systems (LAGs), Fuel Systems (FUEL), Power Thermal Management System (PTMS) or Electrical Power Systems (EPS).

    This position will require the candidate to train such that they can provide: test-planning, real-time control room monitoring, flight test data request, post flight data reduction & analysis, and on-aircraft troubleshooting of the subsystems of the JSF aircraft.

    Once trained in the primary discipline control room support, the candidate is expected to learn to troubleshoot these systems in the event of failures.

    It is expected that the candidate has the ability to learn continuously to expand aircraft system knowledge while working in a fast pace flight test environment.

    The candidate should be willing to support some evening and weekends in support of test activities and aircraft troubleshooting.

    The candidate must be willing to relocate to NAS Patuxent River, MD.

    Skill/Experience/Education
    Mandatory:

    - Mechanical or Aero Engineering Experience

    - Willingness to support occasional evening and weekend aircraft activities

    - possesses interim secret clearance

    Desired:

    - Experience with aircraft Hydraulic systems (HYD)

    - Experience with aircraft Landing Gear and Arrestment systems (LAGs)

    - Experience with aircraft Power Thermal Management Systems (PTMS)

    - Experience with aircraft Electrical Power Systems (EPS)

    - Experience with aircraft Fuel Systems (FUEL)

    - Previous lab test or aircraft flight test experience including: real-time data monitoring, flight test data requests and post-test data reduction and analysis

    - Experience with root cause analysis/investigation

    - Ability to develop on-aircraft troubleshooting plans utilizing hardware, software, and interface documentation and communicate them effectively to maintenance personnel

    - Software experience with: MS Office, Programming in C++, MATLAB, IADs, FireSpy IEEE 1394 Bus Analyzer and/or JEDI

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Mechanical/Aero Engineering 4-5 Years No
     
    Job Number: SW-0360
    Job Location: Patuxent River, MD
    Rate: 40-50/hr DOE
    Duration: 10 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Integration Testing

    Description:
    Systems Integration Testing

    Location: Savannah, GA
    Pay Rate: $50/hr
    Duration: Long Term Contract
    Shift: 3rd Shift (10PM - 6:30 AM)

    Unique Skills:
    -This Company is looking for engineers to be part of a team that will be executing aircraft level testing in Company advanced integrated test labs.
    -These engineers are expected to have some aircraft systems knowledge.
    -Test lab experience is preferred.
    -An understanding of verification techniques, especially related to SAE ARP 4754 guidance, along with Systems Engineering experience, is a plus but not required.
    -Engineers will have ability to operate independently, documenting issues and communicating those effectively with supporting data.
    -An understanding of system interfaces, especially basic digital bus communication like ARINC 429, ARINC 664, and CAN bus to aid in troubleshooting.
    -The primary focus of the role is 3rd shift execution of Test procedures and support of engineering system investigations.
    -Provide feedback on test procedures, with an understanding of the lab environment.
    -Basic troubleshooting skills, experience with hands-on problem solving, and a systematic approach to problem solving are a must.
    -Engineers will be expected to work with minimal direction in an integrated systems lab environment, and keep a focus on safe, efficient use of the lab facilities.
    -Any experience in automation and scripting with MATLAB, Python, perl, java, c++, and other programming languages is a benefit.
    -Experience in post-processing of test data, creation of test results metrics, or knowledge of instrumentation systems and data collection is a plus.
    -Systematic use of Problem Reporting tools for collection and management of system problems is key.
    -This is a 3rd Shift position, with standard hours of roughly 10PM - 6:30 AM after a training period.
    -Successful applicant will be self-motivated, and able to develop a testing approach from initial procedure review, through lab operations, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs.
    -Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require.
    -Technical writing experience is beneficial.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Company aircraft.

    Principal Duties and Responsibilities/Essential Functions:
    1. Solves typical engineering problems within assigned discipline
    2. Provides technical assistance to engineering staff and contributes to completion of project milestones
    3. Responsible for a complex engineering assignment, or a full project of lesser complexity
    4. Follows established schedules while developing plans for engineering assignments
    5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
    6. Proficiently applies company/organization policies and procedures

    Additional Functions:
    1. Actively works to improve daily processes, and ensures all work meets customer requirements
    2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
    3. Performs other duties as assigned

    Other Requirements:
    1. The level of technical skills and abilities appropriate for this grade will be established by each discipline
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources
    4. Ability to convey technical concepts in both written and verbal formats
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues
    6. Works under general supervision for routine tasks of minor complexity
    7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 6883
    Job Location: Savannah, GA
    Rate: 50.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Integration Testing, 3rd Shift - Eng II

    Description:
    UNIQUE SKILLS
    Gulfstream is looking for engineers to be part of a team that will be executing aircraft level testing in Gulfstream advanced integrated test labs. These engineers are expected to have some aircraft systems knowledge. Test lab experience is preferred. An understanding of verification techniques, especially related to SAE ARP 4754 guidance, along with Systems Engineering experience, is a plus but not required. Engineers will have ability to operate independently, documenting issues and communicating those effectively with supporting data. An understanding of system interfaces, especially basic digital bus communication like ARINC 429, ARINC 664, and CAN bus to aid in troubleshooting. The primary focus of the role is 3rd shift execution of Test procedures and support of engineering system investigations. Applicants will also provide feedback on test procedures, with an understanding of the lab environment. Basic troubleshooting skills, experience with hands-on problem solving, and a systematic approach to problem solving are a must. Engineers will be expected to work with minimal direction in an integrated systems lab environment, and keep a focus on safe, efficient use of the lab facilities. Any experience in automation and scripting with MATLAB, Python, perl, java, c++, and other programming languages is a benefit. Experience in post-processing of test data, creation of test results metrics, or knowledge of instrumentation systems and data collection is a plus. Systematic use of Problem Reporting tools for collection and management of system problems is key. This is a 3rd Shift position, with standard hours of roughly 10PM - 6:30 AM after a training period. Successful applicant will be self-motivated, and able to develop a testing approach from initial procedure review, through lab operations, data processing, task optimization, and specifically communication of technical information to a wide range of audiences, meeting customer needs. Candidates should have a willingness to work off-shift and weekend hours on occasion when program milestones require. Technical writing experience is beneficial.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelor’s degree. Experience credit will be considered for related advance degrees limited to 2 years for Master’s Degree and 4 years for PhD in fields applicable to this job position.

    POSITION PURPOSE
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Solves typical engineering problems within assigned discipline
    2. Provides technical assistance to engineering staff and contributes to completion of project milestones
    3. Responsible for a complex engineering assignment, or a full project of lesser complexity
    4. Follows established schedules while developing plans for engineering assignments
    5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy
    6. Proficiently applies company/organization policies and procedures

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes, and ensures all work meets customer requirements
    2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. The level of technical skills and abilities appropriate for this grade will be established by each discipline
    2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures
    3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources
    4. Ability to convey technical concepts in both written and verbal formats
    5. Contacts are primarily within the organization, with occasional customer contacts on routine issues
    6. Works under general supervision for routine tasks of minor complexity
    7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 16-655-87902
    Job Location: Southeast
    Rate: $50.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Principal Engineer

    Description:
    POSITION DESCRIPTION
    POSITION OVERVIEW/ JOB DUTIES
    •Responsible for generating requirements, specifications, block diagrams, schematics, wiring diagrams, layout drawings, bills of material, flight manual supplements, and test plans/reports for the design, development and integration of complex aircraft electrical/avionics systems.
    • Provides overall management of the systems and electrical engineering deliverables.
    • Formulate, implement and track assigned engineering programs to achieve overall goals, technical requirements, schedules, contracts, and specifications.
    • Determine, control and report project engineering budget and variance.
    • Coordinate data submittals supporting FAA certification
    • Actively supports and participates in PDRs and CDRs.
    • Interface with other Engineering Leads, CPMs and other departments to ensure design requirements are fully defined and provide estimates for the required activities.
    • Required to complete technical reviews engineering budget and variance.
    • Coordinate data submittals supporting FAA certification
    • Actively supports and participates in PDRs and CDRs.
    • Interface with other Engineering Leads, CPMs and other departments to ensure design requirements are fully defined and provide estimates for the required activities.
    • Required to complete technical reviews of others drawings to ensure zero rework at the shop level.
    • Completes assignments within allotted time maintaining Engineering quality standards.
    • Provides timely technical assistance to production, quality and other departments in interpretation and implementation of design data.
    • Responsible for the following deliverables:
    o Electrical/ Systems Drawings
    o Block Diagrams
    o Electrical Load Analysis/ Electrical Load Change Report
    o Associated Test Plans
    o System Safety Assessment/ Functional Hazard Assessment
    o Aircraft Flight Manual Supplements
    o Associated Approvals
    o Wire Routing Drawings
    o Assist with ICAs, Certification Plans, and Issue Papers as required
    • Assist Engineering Director as required.
    • Perform other job duties as assigned. This position has indirect supervision responsibilities.


    POSITION REQUIREMENTS
    MINIMUM REQUIREMENTS
    • BS Engineering (Electrical or Avionics) required. Five years or more of experience in corporate jet aircraft avionics and electrical systems design. Avionics/Electrical Modification Design Experience required.
    • DER authorization preferred but not required.
    • Have awareness of design practices necessary to comply with FAA regulations and policies.
    • Be able to work either alone or as a team to solve problems.
    • Be a self-starter with the ability to generate alternative ideas.
    • Must be able to promote a team environment.
    • Must be able to work overtime & weekends as required.
    • Demonstrated problem-solving skills.
    • Have excellent written and verbal communication skills and excellent interpersonal skills.
    • Proficient with AutoCAD. Working knowledge of Word, Excel, and Outlook.

    PHYSICAL REQUIREMENTS
    MUST BE ABLE TO
    • Walk throughout the facility.
    • Work in a sitting position for long periods of time at a computer terminal.
    • Lift up to 75 Lbs.
    • Bend, kneel, and stretch to work on various parts of the aircraft.
    • Think clearly, logically, and analytically.
    • Write and speak clearly and intelligibly.
     
    Job Number: 16-646-3290
    Job Location: Springfield, IL
    Rate: Open
    Per Diem: NO
    Overtime: Possible
    Duration: Permanent
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Safety Engineer

    Description:
    Systems Safety Engineer-Tech Spec 1
    Savannah, GA
    Rate: $50-$54
    Unique Skills:

    Applicant must have and be able to demonstrate thorough knowledge of aerospace safety analyses including but not limited to performance of aircraft and system safety assessments in accordance with SAE ARP 4761. Knowledge of ARP 4754A is desirable. Applicant needs to know how to perform a functional hazard assessment (FHA), system safety assessment (SSA) and particular risk assessment (PRA) from initial requirement through requirement validation. Be very familiar with reliability calculations and fault tree analysis. Familiarity with fault tree software is preferred, experience with CAFTA is preferred.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6314
    Job Location: Savannah, GA
    Rate: $50-$54
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Safety Tech Spec I

    Description:
    UNIQUE SKILLS
    Applicant must have and be able to demonstrate thorough knowledge of aerospace safety analyses including but not limited to performance of aircraft and system safety assessments in accordance with SAE ARP 4761. Knowledge of ARP 4754A is desirable. Applicant needs to know how to perform a functional hazard assessment (FHA), system safety assessment (SSA) and particular risk assessment (PRA) from initial requirement through requirement validation. Be very familiar with reliability calculations and fault tree analysis. Familiarity with fault tree software is preferred, experience with CAFTA is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.

    POSITION PURPOSE
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-589-75401
    Job Location: Southeast
    Rate: $50.00 to $54.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Engineer

    Description:
    Instrumentation Engineer

    Location: Savannah, GA
    Rate: $52.00 - $57.00/HR
    Long Term contract


    Unique Skills:
    - The Test Lab is looking for an Instrumentation Engineer with experience operating Data Acquisition Systems and/or Load Control Systems as they relate to the static and dynamic testing of aircraft.
    - Successful applicant would provide operational support of our Structural Test Lab including participating in the setup and operation of load control systems and computer based data acquisition systems to support the conduct of static and fatigue test programs.
    - Experience with HBM data acquisition systems or MOOG Load Control Systems is a plus.
    - Experience troubleshooting typical measurement system setup and hardware problems is also desired.
    - Experience with Strain Gage applications is desired.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 5832
    Job Location: Savannah, GA
    Rate: $52.00 - $57.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writer

    Description:
    Technical Writer
    UNIQUE SKILLS 1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

    Education and Experience Requirements:
    Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.
    Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment.


    Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writer

    Description:
    1. Candidate should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures to include but not limited to maintenance and inspection procedures, structure repair, fault isolation, wire diagram and/or parts catalogs from supplier and engineering data 2. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire 3. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products 4. 'Hands-on' experience or working knowledge of aircraft inspection programs, aviation regulations, aircraft system content organization and OEM technical manuals development preferred, as a minimum candidate should possess knowledge of the MSG-3 Maintenance Program and ISC Sustaining process 5. Experience with aircraft technical manual content organization and authoring using S1000D spec and SNS, or recent experience of the same using iSpec standards required 6. Familiarization with Electrical Wiring Interconnection System (EWIS) best practices, applicable CFRs and development of related maintenance procedures desired 7. Accustom to working in a fast paced project environment and able to work overtime as required to meet deadlines 8. Understanding of and practical experience with Simplified Technical English, Spec ASD-STE100 and use of STE validation software desired 9. Mentor Graphics Capital Harness Systems (CHS) knowledge a plus

    Education and Experience Requirements:
    Bachelors degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.

    Position Purpose:
    Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Write technical publications content as directed. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. 4. Provide input to management on new processes or technology for integration into the technical publications business model. 5. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. 6. Work with management, other departments, and team members in the development of specific project data. 7. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. 8. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. 9. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. .

    Other Requirements: 1. At least three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret blueprint and Engineering Orders. 4. Must have a thorough knowledge of aircraft tools, test equipment, vendor coding, parts nomenclature, maintenance procedures, and of aircraft equipment and maintenance.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Writers - Seattle, WA

    Description:
    STS AeroStaff Services is currently hiring Technical Writers for open positions in Seattle, Washington.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Duties:

    • Under minimal direction, supports the preparation and revision of Maintenance & Engineering manuals.
    • The Technical Writer works under high-pressure to meet deadlines that safeguard a safe and compliant operation.
    • Author, revise, and publish documentation that provides all Maintenance and Engineering personnel with necessary information and instructions to perform their duties and responsibilities with a high degree of safety.
    • Publish documentation that adheres to applicable Code of Federal Regulations (CFR)s, Department of Defense (DoD) standards, Occupational Safety & Health Administration (OSHA) Laws and Regulations, and Air Transport Association (ATA) Specifications, as they relate to publications.
    • Provide accurate information in technical documents by ensuring correct content and format with correct spelling, punctuation, and grammar.
    • Review published materials and recommend revisions or changes in scope, content, and methods of reproduction.
    • Assist with and develop supporting materials (illustrations, flow diagrams, tables, etc.).
    • Organize material and complete change request according to set standards regarding order, clarity, conciseness, style, and terminology.
    • Participate in the preparation of procedures for processing technical data through the various stages of development and publication.
    • Track and monitor the flow of all documents from inception to publication.
    • Develop aircraft maintenance programs procedures, work documents, and diagrams to support maintenance in meeting the safe and economical maintenance and operations standards of the aircraft.
    • Support the efforts of Subject Matter Experts to complete projects in accordance with established deadlines with strict adherence to quality standards.
    • Interface with Subject Matter Experts in the writing, editing, and publication of various types of documents such as technical manuals, maintenance programs documentation, and training material etc.
    • Coordinate the publication and revision of various in-house technical publications with other Writers in the department.
    • Identify trends and communicate suggestions for improving efficiency and effectiveness of existing Publications processes to ensure accuracy, usability and currency of documentation.
    • Create professional documentation of processes and procedures for use by all team members. Update documentation when changes are made.
    • Investigate and resolve problem areas through self-discovery and by interfacing with various management and maintenance personnel.
    • Perform the self and peer edit of documents to ensure format, content, flow and integrity are in conformance with internal quality management system and customer requirements.
    • Provide quality assurance checklists for all document deliverables.
    • Compile daily/weekly/monthly activity reports and periodic project reports.
    • Provide documented, well thought out solution alternatives and recommendations on issues and process improvements.
    • May perform other responsibilities as assigned.
    • Responsibilities and duties may change when circumstances dictate. (e.g., emergencies, changes in workload, rush jobs or technical developments.).

    Qualifications:

    • Must have a Bachelor’s Degree in English, Technical Communications, or equivalent; formal training equivalent to the completion of a discipline and three or more years of progressive experience in Aviation or other Technical Communication discipline.
    • Experience with Adobe Framemaker and Acrobat Pro Microsoft Word, Excel, Visio, and Outlook CorelDRAW.
    • Ability to work both independently and jointly in a team environment is essential.
    • Ability to work under pressure at near 100% accuracy while meeting inflexible deadlines.
    • Detail oriented.
    • Demonstrated capability to communicate verbally and in writing.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36975
    Job Location: Seattle, WA
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 800/800-2400
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Telemetry and Data Operations

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
    We are seeking Telemetry and Data Operators to join the team in Moses Lake, WA.
    Knowledge and Responsibilities:
    � Operate and maintain telemetry, data processing, and video systems in support of flight test data collection
    � Assist in the preparation and check-out of telemetry systems, conduct telemetry operations, and process data post flight.
    � Flight test experience is strongly desired
    � Candidate will have knowledge of the operation of tracking antennas and telemetry receivers as well as all standard lab equipment used for the maintenance and troubleshooting of telemetry systems and subsystems
    � Candidate must be proficient in the use of data servers and computer peripherals for the purpose of data downloading, processing, managing, backup, and recovery of data
    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Tel/ML
    Job Location: Moses Lake, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 11/14/2020
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Administrator / Project Coordinator

    Description:
    Tool Admin/Project Coordination Statement of work:
    Support to include but not limited to the following:
    1. Reviewing and Processing Supplier Tooling (Z Tool) requests
    2. Managing and reporting status of Offload Tooling requests
    3. To help supply technical support to Programs and Operations
    4. Process and Manage Tool Engineering offload packages (SAP)
    5. Process Tool Design Orders, PR/PO payments (SAP)
    6. Specialized Tooling projects/presentations as needed
    7. Standard Work creations and maintenance
    8. Data analysis and reporting

    The Durable Tooling organization is a service organization responsible for providing Tool Designs, Supplier Tooling inputs, Strategic Sourcing Technical support, and oversight of the general tooling principles for Company Aircraft.

    High School diploma required, Bachelor degree in applicable field strongly preferred.

    Must be fluent with Microsoft Office
    Must have some knowledge of SAP, or database operating systems
     
    Job Number: 171717
    Job Location: Stratford, CT.
    Rate: $34.00
    Per Diem: If Qualified
    Overtime: Possible
    Duration: 2 years
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Eng II

    Description:
    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.

    POSITION PURPOSE
    Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
    2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
    3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
    4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
    5. Write procedures on use of tools.

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes, and ensures all work meets customer requirements.
    2. Assist Tool shop as needed, during Periodic and Conformity Inspections.
    3. Assist in formulating Tool Design policies, procedures, and specifications as required.
    4. Perform other duties as required.

    OTHER REQUIREMENTS
    1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T.
    2. Demonstrated knowledge of materials, material strengths, heat treat method and uses.
    3. Ability to conceptualize the following with minimal supervision, assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
     
    Job Number: 16-644-85042
    Job Location: Southeast
    Rate: $55.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Engineer II

    Description:
    Tool Design Engineer II

    Location: Savannah, GA
    Rate: $55.00/HR
    Long Term contract
    4x10


    Education and Experience Requirements:
    - Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    - Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment.
    - Three (3) years Tool Design experience.
    - One (1) year CAD/CATIA experience.


    Position Purpose:
    Performs engineering work related to the design of tools and equipment used in the manufacture and support of Gulfstream aircraft.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write procedures on use of tools.

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. 4. Perform other duties as required.

    Other Requirements: 1. Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.
     
    Job Number: 6754
    Job Location: Savannah, GA
    Rate: $55.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design in Palmdale, CA #0258AS

    Description:
    Recruiter to contact: Adam Salazar
    Job title: Tool Design
    Location: Palmdale, CA
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
    1st shift

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes

    Description:
    • Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

    • Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

    • Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    • Responsible for evaluating ergonomic tooling.

    • He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

    • Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

    -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

    Desired:
    Manufacturing Floor experience
    -Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
    -Ability to think out of the box and modify standard tools to fit unique requirements.
     
    Job Number: #0258AS
    Job Location: Palmdale, CA
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design in Palmdale, CA #0258AS

    Description:
    Recruiter to contact: Adam Salazar
    Job title: Tool Design
    Location: Palmdale, CA
    Compensation: DOE
    Assignment Length: 12 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: Yes) Non exempt
    1st shift

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes

    Description:
    • Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site.

    • Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools.

    • Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    • Responsible for evaluating ergonomic tooling.

    • He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements.

    • Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:
    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling.

    -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation.

    -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.

    Desired:
    Manufacturing Floor experience
    -Ability to design and apply tooling concepts to repair and modify aircraft assemblies.
    -Ability to think out of the box and modify standard tools to fit unique requirements.
     
    Job Number: #0258AS
    Job Location: Palmdale, CA
    Rate: DOE
    Duration: 12 Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Adam Salazar
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design with active secret / Catia, SolidWorks, Or Pro/E CA

    Description:
    Lockheed Martin Aero 0258
    Job title: Tool Design
    Job Number: 158189
    Location: Palmdale, CA
    Compensation: 50-70/hr(DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non exempt
    1st shift

    Description:

    Candidate will be responsible for the design, maintenance, and repair of standard tools for the Palmdale site. Responsible for working with Tool Design and Engineering personnel on producibility issues related to standard tools. Individual must have knowledge of pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. Responsible for evaluating ergonomic tooling. He/she will be required to create quick solutions to manufacturing problems and modify standard tools to fit unique area/program requirements. Responsible for providing tools on startup programs to include cutting tools, motors, fastener installation tooling and gauging.

    Skill/Experience/Education
    Mandatory:

    Working knowledge of the Standard Tools which includes any of the following: sheet metal, assembly tooling, hand tools, machine shop tools, sheet metal fabrication tools, plumbing cable/electrical tooling, and quality control tooling. -Knowledge and experience with any of the following: pneumatic tools, powerfeed motors, drilling, grinding, machining, and fastener installation. -Experience with either of the following CAD Software programs: Catia, SolidWorks, Or Pro/E -Must be a US Citizen. This position is located at a facility that requires special access.
    Desired:

    Manufacturing Floor experience -Ability to design and apply tooling concepts to repair and modify aircraft assemblies. -Ability to think out of the box and modify standard tools to fit unique requirements.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    Tool Engineer 11 Years + Yes
     
    Job Number: SW-0258
    Job Location: Palmdale, CA
    Rate: 50-70/hr DOE
    Duration: 12 month contract
    Input Date: 11/14/2020
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designer

    Description:
    .
    Tool Designer under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of aircraft. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. Write procedures on use of tools.


    Must possess strong CAD/CATIA modeling skills and have a clear understanding of GD&T. Demonstrated knowledge of materials, material strengths, heat treat method and uses. Ability to conceptualize the following with minimal supervision. assembly tooling, composite tooling, machine tooling, handling equipment, and scaffolding.

    Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years drafting/design experience to include documented experience in a tool shop or machine shop environment. Three (3) years Tool Design experience. One (1) year CAD/CATIA experience.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Visual Designer

    Description:
  • Provide advanced, detailed computer renderings or animation of design concepts utilizing state-of-art 3D Graphics
    Systems.
  • The incumbent is responsible for developing aircraft interior and exterior renderings required for the completion
    and refurbishment sales and design.
  • Three-dimensional computer modeling and rendering skills are required.
  • Photoshop knowledge required. Print media and photo retouching skills are helpful.
  • Experience color correcting images to accurately represent real-world lighting and materials.
  • Must have good color perception and can make adjustments to renderings to match actual materials in final, large format
    printer output.
  • Knowledge and understanding of multiple operating systems is preferred.
     
  • Job Number: 24-149
    Job Location: GA
    Rate: DOE
    Per Diem: Split
    Overtime: Possible
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Wire Design & Installation Engineer III (MO) - UNIGRAPHICS

    Description:
    Develop aircraft avionics system installations, concepts and designs. The primary responsibility will be to participate as a member of the Equipment Installation Team in the execution and management of the mechanical design, production, integration, installation and support of all equipment and materials into the F-15 program. As the Equipment Installation Team is shared, the team also performs similar duties (including retrofit) for the F/A-18 and EA-18 production programs as well as the AV-8B and T-45. This position requires interaction with other Air Vehicle & Mission Systems teams. The individual will be responsible for developing and maintaining equipment product detail and creating assembly & installation designs (e.g. equipment trays, racks, mounts, shelves, electrical panel assemblies and antenna). Will follow established processes, specifications and procedures that support the design and manufacture of mechanical commodities. This individual will be accountable for meeting the cost, schedule, quality and performance to plan metrics established by the Team Leader.
    Applicant must have superior Unigraphics skills and good communication, analytical, and organizational skills. Moderate proficiency with Microsoft Office applications such as Word, Excel and PowerPoint is required.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: EEmo
    Job Location: Berkeley, MO
    Rate: up to $45/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: INNOVA SOLUTIONS, INC
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.innovasolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    software /I.T. Engineer - RM

    Description:
    Johnson Service Group is seeking a Software/IT Engineer for a 2 year contract opportunity in Trumbull, CT!

    No Corp to Corp or H1b sponsorship.

    Description:

    Candidate with skills and experience in software/I.T. architecture such as Map Reduce, Spark, Hadoop Distributed File System (HDFS), Python, Database (Oracle / SQL) and statistical analysis of aircraft data (including Health Usage Monitoring System ((HUMS)) are preferred.



    Candidate with advanced degree in Computer Science, Data/Science.



    Tasks:

    The Contractor shall gain access to all necessary data sources within The Customer�s environment, via systems/methods compliant with COMPANY policy.
    The Contractor shall aid in the identification of specific data residing in HDFS and/or other sources as required by The Customer. This may include locating data elements/sources, as well as understanding the definitions, characteristics, risks and limitations of this data.
    The Contractor shall aid in the extraction of data residing in HDFS and/or other sources as required by The Customer. This includes raw data extraction, as well as the extraction of �feature� data, which may require the Contractor to fuse multiple data types/elements/signals/sources.
    The Contractor shall aid in the manipulation and analysis of extracted data as required by The Customer. Manipulation may include the wrangling, aggregation and/or other conditioning of data for further analysis. Analysis may include data visualization, statistical investigation and/or other techniques.
    The Contractor shall automate all extractions, manipulations and analyses whenever possible, utilizing methods and tools (including scripting languages) agreed to by The Customer
    The Contractor shall store and make accessible the results of their efforts via approved methods. This includes extracted datasets and associated manipulations/analyses, as well as any scripts/code/tools created/modified to perform these actions.
     
    Job Number: 352702
    Job Location: Trumbull, CT
    Rate: Open
    Per Diem: yes
    Overtime: yes
    Duration: 2 year
    Start Date: ASAP
    Input Date: 11/14/2020
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Back to Advanced Job Search