Job Search Results

653 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/11/16 Friday 07:48AM Pacific Time by ContractJobHunter. )

Listings 1 - 653

Go To My Job Tracker

Expand all descriptions

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2018
Last Updated: 11/15/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Design Engineer

Description:
Aircraft Interiors Designers Needed. Catia v5
Location: Mojave, CA
Duration: 12+ months
Rate: $55-65/hr
Good overtime potential

MUST BE US PERSONS.

Aircraft Interiors Design Engineer

We are looking for senior level interior design engineers with experience doing conceptual design and preliminary design phase, initial sizing for developing head liners, trade studies, strong with Catia V5, have some background in mechanisms and moving parts, involved in engineering requirements definition and can mentor younger engineers.
BSME/BSAE is preferable, but not required.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $55-65/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Air Systems ECS

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with Avionics systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Experience in as many of the following as possible:
o Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
5+ years relevant work experience related to avionics systems integration and certification.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 02/19/2017
Last Updated: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Avionics Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.
The individuals in this role will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
The ideal candidate will possess aircraft certification experience with a specialty in electrical systems and 5 years of relevant work experience related to avionics systems integration and certification.

Responsibilities of the Aerospace Avionics Engineers

● Coordinate system test and certification requirements.
● Support flight test and ground test activities.
● Analyze test data and evaluate system operation.
● Prepare test reports.
● Domestic and occasional international travel is required.

Requirements of the Aerospace Avionics Engineers

● Experience in Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
● 5+ years relevant work experience related to avionics systems integration and certification.
● Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
● Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: LT
Start Date: open
Input Date: 03/15/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:
� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors
Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Cab/Fl
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: open
Input Date: 03/15/2017
Last Updated: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 02/19/2017
Last Updated: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 07/18/2017
Last Updated: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Essential Functions:
Coordation experience with a specialty in electrical systems.inate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elect/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with electrical systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: LA
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are seeking Electrical engineers with systems experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.

Essential Functions:
� Aerospace Electrical Engineer shall coordinate system test and certification requirements.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.

Desired Qualifications:
� Electrical Engineer will have a deep understanding of power distribution system, failure cases, load shedding, electrical power management
� Understanding of EWIS and wiring a plus
� 5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elec/Orl
Job Location: Orlando, FL
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Project Engineer

Description:
Aerospace Project Engineer

Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

Seeking a Project Engineers with Flight Test experience to join the team in Seattle, WA. The ideal candidate will possess 4+ years of experience in one of the following disciplines.
Flight Test Management Software
Flight Test Trouble Shooting Processes
Flight Test Equipment Management / Coordination
Aerospace Project Engineering
Bachelor�s Degree in Software Engineering, Aerospace Engineering, Mechanical Engineering, Project Management or a related subject (or equivalent combination of work and experience).
Four or more years of aerospace and/or project management experience. Flight Test environment preferred, but not required.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: Split possible
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 02/19/2017
Last Updated: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/07/2017
Last Updated: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Program Engineers II / III / IV (CA)

Description:
Applicant will perform Maintenance Steering Group-3 (MSG-3) analysis on Lightning/High Intensity Radiated Fields (LHIRF) Significant Items (LHSIs) to identify scheduled maintenance required to maintain LHIRF protection features for continued airworthiness. Applicant will compile analysis results and present to the customer working group (Airlines and Regulatory) for approval. Applicant should have good working knowledge and experience with electrical component design/installations, engineering drawings/schematics and component specifications. Applicant needs to be detail oriented with excellent research skills. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: MaintEngCA
Job Location: Seal Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/16/2016
Last Updated: 01/13/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Engineers - Purchase, NY

Description:
STS AeroStaff Services is currently hiring Aircraft Structures Engineers for open positions in Purchase, New York.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

The Aircraft Structures Engineer reports to the Structures Engineer Manager, and is responsible for the technical accuracy and reliability of aircraft. Additional responsibilities include the Boeing 747 aircraft systems technical accuracy and reliability.

Job Duties:

• Provide budgetary data on projects and issues as directed.
• Report on the status of projects and issues as directed.
• Issue instructions and documents to economically support operations and return aircraft to service in a safe, airworthy, and timely manner.
• Develop and/or obtain approved data, acceptable data, and Alternate Methods of Compliance (AMOCs) for repairs, alterations, and modifications.
• Update technical source documents as applicable to insure accuracy.
• Support integration of new and previously operated aircraft.
• Liaise with manufacturers; maintenance representatives, repair & overhaul (MRO) facilities; outside engineering departments; regulatory personnel; and other outside agencies.
• Evaluate Federal Aviation Regulations (FARs), Notices of Proposed Rulemaking (NPRMs), Airworthiness Directives (ADs), Service Bulletins (SBs), Service Letters (SLs), and other notifications of in-service issues.
• Develop product improvement modifications as directed by Reliability Indicators.
• Work with original equipment manufacturers on emerging issues to help ensure safety and airworthiness, but also minimize the economic impact.
• Organize, develop and provide all necessary Structures Engineering documentation required to complete aircraft Systems modifications and repairs within the allocated time schedule and budget allowance.
• Establish component repair and build specifications to enhance dispatch reliability in accordance with budgetary and regulatory requirements.
• Provide technical support to Technical Operations, Ground Operations, Flight Operations, and other Worldwide Holdings personnel.
• Coordinate with other Engineering staff to provide 24/7 technical support.
• Review systems portion of the Aircraft Maintenance and Inspection Program, and initiate maintenance program changes and changes to maintenance documents.

Qualifications:

• 10 years Aircraft Structures Engineering.
• 5-7 years in applied engineering setting.
• B.S. Engineering/Technical Engineering Degree (ME or AE) or equivalent experience.
• Meets deadlines, daily attendance & punctuality standard.
• Remembers & follows instructions, Work is thorough, Alertness, Commitment to task, Perceptivity, Produces accurate, dependable work, Output is consistent, Complete attention to detail.
• Volume of work produced meets expectations.
• Experience with Microsoft Word, Excel.
• Familiarity with aircraft and engine system components.
• Strong technical skills and knowledge of large aircraft system design.
• Ability to identify cost effective engineering solutions.
• Excellent communication skills.
• Ability to interface with manufacturers and regulatory agencies.
• Some financial analysis skills required.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37297
Job Location: Purchase, NY
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/11/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
Aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s is seeking multiple Aircraft Systems Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking a contract or fulltime engineers to join the team. At least five years� experience with one or more of the following: Electrical, Avionics, Flight Controls, ECS, Protective Systems (Anti Ice, Fire Protection), and Hydro Mechanical Systems (Landing Gear, Hydraulics). The ideal candidate will possess relevant aircraft systems integration and certification experience.
� Electrical
� Avionics
� Flight Controls
� Air Systems (ECS)
� Protective Systems (Anti Ice, Firex)
� Landing Gear
� Hydraulics

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/15/2017
Last Updated: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone Lead Coordinator

Description:
Airframe Systems Integration Zone Lead Coordinator/TSII
Savannah, GA
Rate: $65-$70

Unique Skills:

The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions: 1. Manages Installation Design of primary aircraft barrel assemblies. 2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules. 3. Manages the coordination and development of parts, planning, tooling & purchase orders. 4. Has oversight over the release of engineering documentation. 5. Responsible for interface definition & configuration control of a specific aircraft barrel section. 6. Reviews engineering and manufacturing release criteria. 7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements. 2. Experience in communicating with employees/teams in productive and efficient manner. 3. Ability to work independently and cross-functionally. 4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams. 5. Ensures designs meet customer criteria, quality standards and FAA requirements 6. Knowledge of industry design and documentation standards. 7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must. 8. Experience with mechanical assemblies and manufacturing technique design. 9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. 10. Performs other duties as assigned 11. CATIA Knowledgeware and SmarTeam experience desirable.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6813
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 02/06/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Airworthiness Inspector Sr.


Location: Savannah, GA
Rate: $35.75/HR
Long Term contract


Unique Skills:
Must be able to support AAP on all shifts 24 /7


Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6894
Job Location: Savannah, GA
Rate: $35.75/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/23/2017
Last Updated: 03/16/2017
Firm Name: INCONEN CORPORATION
Attention: Cherise Harris
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics-Electrical Systems Flight Test Engineer

Description:
UNIQUE SKILLS
Experience either conducting or functioning as an on board flight analyst during experimental fixed wing aircraft flight testing in the field of avionics and electrical systems. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 16-528-64401
Job Location: Southeast
Rate: $60.00 to $80.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/31/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Systems Flight Test Engineer

Description:
Avionics/Electrical Systems Flight Test Engineer

Location: Savannah, GA
Rate: $60.00 - $80.00/HR
Long Term contract


Unique Skills:
- Experience either conducting or functioning as an on board flight analyst during experimental fixed wing aircraft flight testing in the field of avionics and electrical systems.
- Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan.
- Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 5792
Job Location: Savannah, GA
Rate: $60-$80
Per Diem: Yes
Overtime: Possible
Duration: LT
Input Date: 02/14/2017
Last Updated: 02/23/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Business Process Analysts - Greensboro, NC

Description:
STS AeroStaff Services is currently hiring Business Process Analysts for open positions in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Business Process Analyst enables problem solving and data driven decisions for the program office and program management team by developing and maintaining metrics, reporting tools, and integrating data across a variety of business systems. These business systems include but are not limited to SAP, Team Center, SharePoint, and individual files in MS Office formats.

Job Duties:

• Collects and interrogates aircraft, project, and part status data from a variety of sources
• Provides metrics and reports in support of the program management team on one-time and recurring needs.
• Develops ad-hoc reporting solutions in MS Excel, MS Access, Business Intelligence (SAP), and MS SharePoint.
• Develops methods to automate and integrate reporting templates to improve consistency while reducing the time to execute on a daily, weekly, or monthly basis.
• Defines requirements, validate, and support implementation of related IT projects for the project office.
• Interacts with several organizations such as Supply Chain, IT, Operations, and Engineering to fully understand and access data.

Qualifications:

• Bachelor’s Degree (BA/BS) from four-year college or university required.
• 2+ years’ experience in developing and maintaining business systems data in a manufacturing environment.

Requirements:

• Strong oral and written communication skills.
• Excellent collaboration and interpersonal skills, with a demonstrated ability to successfully work cross-functionally and with all levels within the business.
• Competent SAP user familiar with common MRP and supply chain functions.
• Proficient in MS Office Suite (Excel, Word, PowerPoint, Project, Access).
• Experience in developing macros in MS Excel using MS Visual Basic.
• Experience building SQL queries to parse and reformat large data sets.
• Able to create and edit Business Intelligence Reports.
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 37323
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 01/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C5 Flight Engineer

Description:
FLIGHT ENGINEER position on company aircraft. Flies and supports developmental, engineering and production flight tests to determine compliance with specification and operational suitability. Acts as instructor aircrew for training of aircrew during syllabus training flights and may conduct classroom training of customer aircrew. Provides support to demonstration flights with customers,government officials, or other personnel aboard to exhibit aircraft systems performance and capabilities. Provides aircrew input and support to developmental and engineering teams, training, customer support and marketing teams regarding aircrew interfaces. Provides engineering and pilot input to training, customer support and marketing teams
 
Job Number: DW - 0348
Job Location: Marrieta, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 01/04/2017
Last Updated: 01/25/2017
Firm Name: MIDCOM CORPORATION
Attention: David Wilkinson
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Configuration Engineer

Description:
Cabin Configuration Engineer - Technical Specialist I

Location: Savannah, GA
Pay Rate: $52/hr - $57/hr
Duration: Long Term Contract
Shift: 4x10

Unique Skills:
-Candidates must be dedicated to cycle-time reduction, achieving a high level of accuracy in their work, and exceeding customer expectations.
-The ideal candidate will possess a working knowledge of aerospace engineering with emphasis on cabin assemblies and installations.
-Must be computer proficient to include Microsoft Suite, SmarTeam, ERP, and various MES platforms.
-Candidates should be familiar with Company aircraft models, terminology, and systems.
-Previous product design experience is highly desired. An understanding of FAA certification requirements, manufacturing processes, product configuration management, and service and support business processes and procedures is also desirable.
-Other key attributes for this position include strong organizational skills, ability to collaborate with others, an acute attention to detail, and proven problem solving capabilities.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6916
Job Location: Savannah, GA
Rate: 52-57
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/28/2016
Last Updated: 01/30/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Interiors Design Engineer

Description:
Unique Skills:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Mount Configuration Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.
 
Job Number: 24-134
Job Location: Savannah, GA
Rate: $55-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 08/31/2016
Last Updated: 02/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Joe
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract Cabin Safety engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:

� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Cabin Safety Engineer shall have experience with flammability, emergency lighting, slides, crash testing, etc.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: CS/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 03/15/2017
Last Updated: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Systems, Electrical Engineer

Description:
Unique Skills:
  • Experience in Engineering design of Electrical Systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems.
  • Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings, test plans, and reports
  • AutoCAD, CATIA V5 and SmarTeam experience preferred

    Education and Experience Requirements:
  • Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
  • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
  • Job Number: 24-153
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 12/16/2016
    Last Updated: 02/07/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Joe
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Checker

    Description:
  • Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam.
  • Experience in engineering of aircraft interior components and installations is preferred
     
  • Job Number: 24-151
    Job Location: Savannah, GA
    Rate: $50 to $55/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 12/15/2016
    Last Updated: 02/07/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineer

    Description:
    Completions Electrical Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    Seeking candidate with:

    -Experience in Engineering design of Electrical Systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, and communication systems.

    -Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings, test plans, reports, and completing supporting analysis/calculations (e.g. voltage drop)

    -AutoCAD, CATIA V5 and SmarTeam experience preferred
     
    Job Number: 6902
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/14/2017
    Last Updated: 03/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineering

    Description:
    Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam. Experience in engineering of aircraft interior components and installations is preferred
     
    Job Number: Completions Electrical Engineering
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: Yes
    Overtime: yes
    Duration: LT
    Start Date: ASAP
    Input Date: 01/04/2017
    Last Updated: 01/04/2017
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Engineering Checker

    Description:
    Completions Electrical Engineering Checker

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Long Term contract


    Unique Skills:
    - Electrical Engineering checking and/or design experience for wiring diagrams, schematics, wire harness drawings, and electrical installation drawings using AutoCAD and SmarTeam.
    - Experience in engineering of aircraft interior components and installations is preferred
     
    Job Number: 6897
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/14/2017
    Last Updated: 02/16/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison

    Description:
    Unique Skills:

    Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings. Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
    Job Number: Completions Electrical Liaison
    Job Location: Savannah, GA
    Rate: 58-63
    Per Diem: Yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 01/04/2017
    Last Updated: 01/04/2017
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison Engineer

    Description:
  • Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings.
  • Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
  • Job Number: 24-152
    Job Location: Savannah, GA
    Rate: $58 to $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 plus years
    Start Date: ASAP
    Input Date: 12/15/2016
    Last Updated: 02/07/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Electrical Liaison Engineering Consultant

    Description:
    Completions Electrical Liaison Engineering Consultant

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Experience with shop floor support/liaison of aircraft outfitting in an Electrical Engineering capacity working with wiring diagrams, schematics, wire harness assembly drawings and electrical installation drawings.
    - Position requires interfacing with electrical installers, inspectors, design engineers and AR's to resolve build and systems functional issues for cabin related systems. (Examples: power, lighting, communications)
     
    Job Number: 6901
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 12/28/2016
    Last Updated: 02/01/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineer

    Description:
    Completions Mechanical Engineer Tech Spec II

    Location: Savannah, GA
    Rate: $62.00/hr - $67.00/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required.
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc).

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6795
    Job Location: Savannah, GA
    Rate: 62.00-67.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/06/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineering Consultant

    Description:
    Unique Skills:

    -CATIA V5 and SmarTeam experience required -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
     
    Job Number: CompMech
    Job Location: Savannah, GA
    Rate: 58-63
    Per Diem: Yes
    Overtime: yes
    Duration: 1 year minimum
    Start Date: asap
    Input Date: 01/04/2017
    Last Updated: 01/04/2017
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineering Consultant

    Description:
    Completions Mechanical Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
     
    Job Number: 6898
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 03/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical/Liaison Engineering Consultant

    Description:
    Completions Mechanical/Liaison Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
    -Experience in Aircraft Production cabin installation liaison duties
    -Able to track engineering change and also provide sound technical advice to engineering design teams during aircraft cabin installations.
     
    Job Number: 6899
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 04/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Calibration Technicians

    Description:
    JSG is looking for a Component Calibration Lab Technician - First Shift and Second Shift for a 12+ month contract opportunity in Stratford, CT!

    Duties:
    Mechanical Component Calibration / Ground Test Instrumentation lab technician capable of working from Engineering drawings with limited guidance to fabricate, install, diagnose and repair hydraulic, mechanical and data systems associated with component calibration fixtures and facilities required to support ongoing Engineering Ground and Flight Test Development programs.
    The calibration of Flight aircraft and Ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
    Must be able to work at heights.
     
    Job Number: 353387
    Job Location: Stratford, Ct.
    Rate: open
    Per Diem: Yes-If qualified
    Overtime: Possible
    Duration: 12 month +
    Start Date: ASAP
    Input Date: 11/30/2016
    Last Updated: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Composite Aircraft Structural Design Engineer

    Description:
    Composite Aircraft Structural Design Engineer needed with experience with Catia v5 CPD composite workbench.
    Looking for self-starters who are problem solvers.
    MUST BE US PERSONS

    -Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
    -Create 3D/2D definition of parts, assemblies and installations.
    -CATIA V5, Composites workbench is a must.
    -Establish manufacturing tolerances for production of structural components using GD&T.
    -Participate in the Engineering definition review, approval and release process
    -Support the review of manufacturing plans and procedures to ensure compliance with design requirements
    -Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

    The Structures Company is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: $55-65/hr DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 02/15/2017
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration/Data Management Analyst I

    Description:
    UNIQUE SKILLS
    Need to have the ability to work on their own and be a self-started. Must have very good communication skills, written and verbal, also very strong computer skills is a must. Avionics experience is a plus, but not required.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in aerospace, engineering, business administration, or a related curriculum; or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. The Commercial and Government CDMA positions require a minimum of three (3) years of either Government or Commercial A/C configuration and data management experience.

    POSITION PURPOSE
    Note - This position description addresses two separate Configuration Data Management Analyst roles - commercial or government. Some duties, responsibilities, and requirements are identical - others are different. The differences are defined by using either the term commercial or government for the affected duties, responsibilities and requirements. Under supervision, analyzes and manages configuration/data requirements contained in Government RFPs and contracts or in Commercial documents or Data Sources, such as A/C Product Specifications, Computerized Maintenance Program (CMP) data, FAA Airworthiness Directives (ADs), Gulfstream Customer Bulletins (CBs), Gulfstream Aircraft Service Changes (ASCs), Gulfstream Service Bulletins (SBs, Gulfstream Maintenance and Operations Letters (MOLs), Supplier Data (Service Bulletins, Service Letters or other supplier Service Literature) and any other assigned documents. Interfaces closely with customers, suppliers, and internal functions regarding those requirements.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Supports the development of Commercial A/C Product Specifications and EIS Newsletters or Government aircraft configuration status accounting reports by researching Product Change Management Team (PCMT) data, aircraft CMP records and other data sources to ensure accurate data is contained in the Commercial or Government reports that are provided to the customer.
    2. Creates, maintains, and operates databases containing configuration and aircraft maintenance status in accordance with Government contract or Commercial requirements.
    3. Works closely with customers, suppliers and internal departments regarding the configuration/data requirements of the Government contracts or Commercial requirements.
    4. Supports formal Government A/C configuration audits (functional and physical).
    5. Participates in Government and/or Commercial Program PMRs, TIMs, Design Reviews, etc. providing configuration/data expertise.

    ADDITIONAL FUNCTIONS
    1. Maintains a thorough understanding of technical data (e.g. Gulfstream Technical and Operating manuals, Federal Acquisition Regulations (FAR, etc.) applicable to specific Commercial requirements or Government contracts.
    2. Performs other duties as required.

    OTHER REQUIREMENTS
    1. For the Government CDMA position, must have knowledge of Government contracting procedures.
    2. Ability to operate personal computer.
     
    Job Number: 16-640-81601
    Job Location: Southeast
    Rate: $30.00 to $40.00/Per Hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 03/03/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Configuration/Data Management Analyst I

    Description:
    Configuration / Data Management Analyst I

    Location: Savannah, GA
    Pay Rate: $30.00/hr - $40.00/hr
    Long Term Contract
    Shift: First

    Unique Skills:
    Need to have the ability to work on their own and be a self started. Must have very good communication skills, written and verbal, also very strong computer skills is a must. Avionics experience is a plus, but not required.

    Education and Experience Requirements:
    Bachelors degree in aerospace, engineering, business administration, or a related curriculum; or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. The Commercial and Government CDMA positions require a minimum of three (3) years of either Government or Commercial A/C configuration and data management experience.

    Position Purpose:
    Note - This position description addresses two separate Configuration Data Management Analyst roles - commercial or government. Some duties, responsibilities, and requirements are identical - others are different. The differences are defined by using either the term commercial or government for the affected duties, responsibilities and requirements. Under supervision, analyzes and manages configuration/data requirements contained in Government RFPs and contracts or in Commercial documents or Data Sources, such as A/C Product Specifications, Computerized Maintenance Program (CMP) data, FAA Airworthiness Directives (ADs), Company Customer Bulletins (CBs), Company Aircraft Service Changes (ASCs), Company Service Bulletins (SBs, Company Maintenance and Operations Letters (MOLs), Supplier Data (Service Bulletins, Service Letters or other supplier Service Literature) and any other assigned documents. Interfaces closely with customers, suppliers, and internal functions regarding those requirements.

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Supports the development of Commercial A/C Product Specifications and EIS Newsletters or Government aircraft configuration status accounting reports by researching Product Change Management Team (PCMT) data, aircraft CMP records and other data sources to ensure accurate data is contained in the Commercial or Government reports that are provided to the customer.
    2. Creates, maintains, and operates databases containing configuration and aircraft maintenance status in accordance with Government contract or Commercial requirements.
    3. Works closely with customers, suppliers and internal departments regarding the configuration/data requirements of the Government contracts or Commercial requirements.
    4. Supports formal Government A/C configuration audits (functional and physical).
    5. Participates in Government and/or Commercial Program PMRs, TIMs, Design Reviews, etc. providing configuration/data expertise.

    Additional Functions:
    1. Maintains a thorough understanding of technical data (e.g. Company Technical and Operating manuals, Federal Acquisition Regulations (FAR, etc.) applicable to specific Commercial requirements or Government contracts.
    2. Performs other duties as required.

    Other Requirements:
    1. For the Government CDMA position, must have knowledge of Government contracting procedures.
    2. Ability to operate personal computer.
     
    Job Number: 6677
    Job Location: Savannah, GA
    Rate: 30.00 - 40.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 04/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cybersecurity Architect - RM

    Description:
    The Cybersecurity Architect performs cybersecurity engineering and certification & accreditation support activities for our DoD customers. The contractor will be located in Stratford, CT. This is a 2 year contract.

    Major responsibilities include
    1. Application of the Risk Management Framework (RMF) for aircraft training systems such as motion-based flight trainers, and aircraft maintenance trainers.
    2. Providing cybersecurity engineering expertise in support of UCDSMO accreditation for cross domain solutions.

    Major tasks include:

    Providing technical support to the design teams to ensure the security controls are implemented properly and will meet the requirements of the security controls baseline;

    Developing security assessment plans;

    Conducting security controls assessments;

    Developing and maintaining the artifacts required to support certification and accreditation;

    Leading the ST&E effort for the cross domain solution;

    Reviewing and providing comments on design specifications and RMF deliverables; and

    Resolving security controls implementation issues with customers and/or vendors


    Certification

    Contractor must have a DoD IA 8570 Level II certification, at a minimum.

    Experience

    Ideal candidate will have previous experience with UCDSMO certification and accreditation.

    Experience implementing DISA STIGS is preferred.

    Must be an organized self-starter, detail-oriented, and capable of working in a fast-paced environment with little direct supervision.
     
    Job Number: 352688
    Job Location: Stratford, CT
    Rate: Open
    Per Diem: Yes
    Overtime: Yes
    Duration: 2 years
    Start Date: ASAP
    Input Date: 11/16/2016
    Last Updated: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Richard Martinsen
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity

    Description:
    Looking for an applicant with a Bachelor's degree and at least 5 years in the following: Check 3D engineering data for conformance to Gulfstream requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding GAC drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems. • Ensures designs meet customer criteria, quality standards and FAA requirements. • Adheres to budget and project schedules. • Provides design guidance and feedback to other engineering personnel. • Other duties as assigned. • Knowledge of industry design and documentation standards. • Experience with mechanical assemblies and manufacturing technique design. • Ability to work independently and cross-functionally. • Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
    PLease check out all of our openings at
    www.hi-tecsolutions.com/jobs
     
    Job Number: 89201
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 01/25/2017
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: 2501 E PIEDMONT RD STE 103
    City, State: MARIETTA, GA 30062-7753
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity Engineer (TSI)

    Description:
    Data Integrity Engineer (TSI)

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Long Term contract


    Unique Skills:
    - Check 3D engineering data for conformance to company requirements as directed.
    - Check parts for fit, form and function to the extent that information is available.
    - Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.
    - Checkers are responsible for determining the acceptability of data in the following areas:
    • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
    • Proper application and compliance with all Engineering and customer drawing requirements.
    • Use and understanding of GD & T a must.
    • Dimensioning and tolerancing including familiarity with ASME Y14.5.
    • Application of best drafting and design practices and procedures.
    • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    • Advise Design personnel regarding company drawing and design practices and procedures.
    • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
    • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
    • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
    • Knowledge of company parts list & PdocM, a plus.

    Essential Duties and Responsibilities
    • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
    • Ensures designs meet customer criteria, quality standards and FAA requirements.
    • Adheres to budget and project schedules.
    • Provides design guidance and feedback to other engineering personnel.
    • Other duties as assigned.
    • Knowledge of industry design and documentation standards.
    • Experience with mechanical assemblies and manufacturing technique design.
    • Ability to work independently and cross-functionally.
    • Experience in communicating with employees/teams in productive and efficient manner.
    • Strong communication and problem-solving skills.


    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6945
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 02/14/2017
    Last Updated: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer (Catia V5)

    Description:
    Any familiarity with structure of C130 aircraft, specifically C130J
    Air Force customer experience
    Experience or familiarity with engineering change documentation
    Experience with Teamcenter PLM software
    Active DoD secret clearance
     
    Job Location: KY
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6mos +
    Start Date: ASAP
    Input Date: 01/06/2017
    Firm Name: PANTHER GROUP
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer / NX 10 CA

    Description:
    Job Title: Design Engineer
    Job Number: 157682/4391
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract

    Description:

    • Contribute to the development of new product requirements through consulting with customers and sales personnel.
    • Validate conceptual problem solutions by performing trade studies and analyses.
    • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
    • Operate as a key element in a team of creative, independent individuals.
    • Represent Moog in a manner consistent with its technical reputation.
    • Create reliable designs through a comprehensive experimental development test program.
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 5-8 years of design and development engineering experience
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Excellent customer relations skills
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Team orientation and desire to participate in and contribute to a high functioning team
    Scope: Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.
     
    Job Number: MB-4391
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 02/13/2017
    Last Updated: 03/10/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineers with Flight Controls Experience

    Description:
    Perform design of aircraft flight controls systems.
    MUST HAVE flight controls experience from a General Aviation OEM:
    Cirrus Aircraft
    Textron (Cessna/Hawker)
    Piper
    AND the following would work too:
    Gulfstream
    Bombardier/Lear
    Embraer

    MUST BE US PERSONS
    Create 3D/2D definition.
    CATIA V5 is a MUST.
    Participate in the Engineering definition review, approval and release process
    Support the review of manufacturing plans and procedures to ensure compliance with design requirements
    Support the creation of test plans which will be used to verify manufacturing processes meet design intent and requirements.

    Looking for self-starters who are problem solvers. Need guys who do not rely on internal processes and hand-holding. Must ask questions and work with peers to figure out problems.

    MUST BE US PERSONS

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: up to $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 10/17/2017
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Systems Integration Zone

    Description:
    Airframe Systems Integration Zone

    Location: Savannah, GA
    Duration: Long Term Contract
    Pay Rate: $60/hr - $65/hr
    Shift: First

    Position Purpose:
    The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

    Essential Functions:
    1. Manages Installation Design of primary aircraft barrel assemblies.
    2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
    3. Manages the coordination and development of parts, planning, tooling & purchase orders.
    4. Has oversight over the release of engineering documentation.
    5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
    6. Reviews engineering and manufacturing release criteria.
    7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Experience in communicating with employees/teams in productive and efficient manner.
    3. Ability to work independently and cross-functionally.
    4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
    5. Ensures designs meet customer criteria, quality standards and FAA requirements
    6. Knowledge of industry design and documentation standards.
    7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
    8. Experience with mechanical assemblies and manufacturing technique design.
    9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    10. Performs other duties as assigned
    11. CATIA Knowledgeware and SmarTeam experience desirable.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 6814
    Job Location: Savannah, GA
    Rate: 60-65
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/07/2017
    Last Updated: 03/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Support and Training Instructor

    Description:
    Design Support and Training - Instructor - Tech Spec II
    Savannah, GA
    Rate:$60-$62

    Unique Skills:

    CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6620
    Job Location: Savannah, GA
    Rate: $60-$62
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/14/2017
    Last Updated: 12/26/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Door Design Engineers

    Description:
    General Summary:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.
    *Generates Engineering Models and Drawings utilizing CATIA Version 5.
    *Utilizes drafting and Geometrical Dimensioning & tolerance knowledge to optimize part design for cost and functionality.
    Searches for problem root cause and develop corrective action plans and solutions
     
    Job Number: Doors-Honda
    Job Location: Greensboro, NC
    Rate: $55.00-$65.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 02/21/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Doors Design Engineer

    Description:
    General Summary:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 02/14/2017
    Last Updated: 06/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    External Loads Engineer - Dynamics

    Description:
    External Loads Engineer - Dynamics

    Location: Savannah, GA
    Rate: $70.00 - $77.00/HR
    Long Term contract


    Unique Skills:
    - Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
    - As an Engineering Consultant in Flutter & Dynamic Loads, you will:
    • Provide solutions for aircraft flutter and vibration problems
    • Analyze aircraft structural dynamic response and load distributions for gust, landing, taxi, and crash landing conditions
    • Analyze aircraft for flutter and determine flutter margins.

    - What you'll bring to the team:
    • Knowledge of aircraft aeroelasticity principles and concepts
    • Good general knowledge of FAR/EASA Part 25 requirements
    • Experience in structural dynamics modeling desired including static to dynamic model conversion
    • Experience with MSC Nastran and Patran or a comparable application
    • Experience with ground tests such as ground vibration tests or landing gear drop tests
    • Experience with flutter flight testing
    • Experience with dynamic analyses such as aircraft crash landing or engine fan blade out is a plus
    • Experience with aeroservoelasticity is a plus

    - What the Loads & Dynamics team does:
    • Creating and delivering a world class aviation experience
    • Contributing to the certification of world class business jet aircraft

    Job description:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 5939
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 03/22/2017
    Last Updated: 07/18/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Application Engineer

    Description:
    Electrical Applications Engineer
    Applicant shall: Maintain Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components, such as: connectors, back shells and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Education/Experience: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting products and services. Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/08/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Application Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Applicant shall:
    - Develop and maintain Electrical Wiring Interconnect System (EWIS).
    - Specific knowledge of qualified electrical component selection, such as: connectors, backshells and other EWIS components based on system and environmental requirements are required.
    - Must be capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements.
    - Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

    Education/Experience:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Gulfstream products and services.

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6803
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/15/2017
    Last Updated: 03/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Applications Engineer
    Savannah, GA
    Rate: $52-$57

    Unique Skills:

    Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6787
    Job Location: Savannah, GA
    Rate: $52-$57
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/06/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Applications Engineer

    Description:
    Electrical Applications Engineer
    Savannah, GA
    Rate: $58-$63

    Electrical Applications Engineering Consultant

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term Contract
    1st Shift

    Unique Skills:

    Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

    Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

    Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 5885
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/16/2017
    Last Updated: 02/23/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Unique Skills:
    Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Satellite Communications - Water System - Waste System - EWIS experience required - 3D Wire Routing - Electrical Checking (Engineering Quality)Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/10/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - TSI

    Description:
    Electrical Engineer - TSI

    Savannah, GA
    Rate: $52-$57
    Long Term contract

    Unique Skills:
    - Candidate shall have experience in one or more of the following: Systems engineering, Analog design, Simulation system hardware design, Data acquisition system design, Instrumentation, Sensor signal I/O card interface, Process measurement and control, Automation Test, Aircraft systems design

    - Candidate must have experience with analog & digital circuit design and analysis - Prefer design experience with a variety of aircraft systems. - Experience with Mentor Graphics CHS / Capital Logic a plus


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 5987
    Job Location: Savannah, GA
    Rate: $52-$57/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 01/30/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer II

    Description:
    Electrical Engineer II
    Unique Skills:

    - Required - Candidate must have circuit design and analysis skills. - Design experience with analog and digital I/O interfaces. - Prefer experience with a variety of aircraft systems. - Prefer experience with Mentor Graphics CHS / Capital Logic.


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:

    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 6477
    Job Location: Savannah, GA
    Rate: $50
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/06/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    UNIQUE SKILLS
    Required Applicant shall: Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches. Capable of interfacing with wiring diagrams, system and EMI/EMC requirements. Job Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-633-80162
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer

    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract


    Required Applicant shall:
    - Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
    - Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6522
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 12/28/2016
    Last Updated: 01/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer


    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract
    1st Shift


    Unique Skills:
    Required Applicant shall:
    - Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS.
    - Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical Work Benches.
    - Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.

    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 years in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6794
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/07/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Harness Installation Engineer

    Description:
    Electrical Harness Installation Engineer
    Savannah, GA
    Rate: $58-$63

    Unique Skills:

    Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6106
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/16/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Fabricators / EMI Harness Technicians

    Description:
    1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    - Experience with electrical and electronic fabrication.
    - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    - Experience with all the tooling and dies required to terminate mil-spec wires
    - Experience terminating EMI harness assemblies
    - Experience fabricating wire harnesses
    - Experience fabricating test sets
    - Experience using hand tools, mechanical and electrical
    - Experience with schematics and electrical diagrams
    - Evidence of Lockout Tag Out Authorized training

    Other Requirements:
    - Requires Safety shoes
    - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
     
    Job Number: 353185
    Job Location: Stratford, CT.
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 1 year +
    Start Date: ASAP
    Input Date: 11/21/2016
    Last Updated: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II

    Description:
    Required:CATIA V5 experience required with specific knowledge of GD&T and the application of the FTA tool. Aerospace experience preferred. SmarTeam experience preferred

    Essential Functions and Key Responsibilities:
    1) Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within current engineering protocols to design, develop and analyze aircraft structures, power plant component parts, mechanical and electrical systems and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.
    2) Analyzes and interprets engineering proposals to develop design for products.
    3) Reviews project documentation and proposed product specifications to determine design approaches.
    4) Confers with Project Management to clarify or resolve problems.
    5) Designs and develops structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports. 6) Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.
    7) Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.
    JOB QUALIFICATIONS: ENGINEER II Formal Education, Training, Professional Certification and Work Experience: Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
     
    Job Number: 13001BR
    Job Location: Tulsa, OK
    Rate: 34.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: APA SERVICES
    Attention: Lisa A
    Address: 4150 INTERNATIONAL PLZ STE 510
    City, State: FORT WORTH, TX 76109
    800 Phone: 888/272-7868
    Fax Phone: 800/285-8805
    Website: www.apaservices.net

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II - Sim & Software

    Description:
    Engineer II - Sim & Software Engineer
    Savannah, GA
    48.00-53.00/Hr
    Long Term

    Contract - Engineer II - Sim & Software Engineer - Req 75962 in GAC Savannah
    Recruiter:Erin Redmond
    FAA Regulated?: No

    Unique Skills:
    1. Matlab/Simulink experience 2. Aircraft simulation software experience 3. Experience with high level programming or scripting language such as any of the following: C++, Python, Java 4. Knowledge of software development life cycle 5. Experience in an aircraft lab test environment desired 6. Aircraft Integration and/or HIL experience desired 7. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors degree. Experience credit will be considered for related advance degrees limited to 2 years for Masters Degree and 4 years for PhD in fields applicable to this job position.

    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
    Languages Required (in addition to English): No Selection
     
    Job Number: 6360
    Job Location: Savannah, GA
    Rate: 48.00-53.00/Hr
    Per Diem: $110/Week/Split
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II - Test Automation

    Description:
    Engineer II - Test Automation


    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract
    1st Shift



    Unique Skills:
    - The ideal candidate will demonstrate willingness to learn/grow into a unique position providing Test Automation solutions for the industry's most advanced integrated aircraft systems.
    - Python, Matlab and Excel experience required. A combination of experience with the following are

    Highly preferred:
    - Computer Communications: ARINC, ASCB, CANbus, Ethernet
    - Linux, OpenWrt, Goebelyzer
    - GUI Development, Display Systems
    - PyQt, Open GL, GL Studio, DirectX
    - Data Acquisition and Post-Processing (IADS a plus)
    - Simulink, Simulation / Control, Real-Time Programming
    - VBA, C++, Visio, Subversion, DOORS


    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 18 months related engineering experience with Bachelors, or less than 18 months engineering experience with Masters or PhD.


    Position Purpose:
    Performs engineering work related to the investigation and the solution of technical problems associated with research, design, development, service and manufacture of Gulfstream aircraft.

    Principal Duties and Responsibilities:
    Essential Functions: 1. Solves typical engineering problems within assigned discipline 2. Provides technical assistance to engineering staff and contributes to completion of project milestones 3. Responsible for a complex engineering assignment, or a full project of lesser complexity 4. Follows established schedules while developing plans for engineering assignments 5. Obtains appropriate level of supervisor approvals for work accuracy and adequacy 6. Proficiently applies company/organization policies and procedures

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements 2. Maintains a current and up-to-date knowledge of developments and application of technical principles, theories, and concepts in assigned field of expertise 3. Performs other duties as assigned

    Other Requirements: 1. The level of technical skills and abilities appropriate for this grade will be established by each discipline 2. Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures 3. Failure to achieve results, or erroneous decisions or recommendations, may cause delays in program schedules and/or allocation of additional resources 4. Ability to convey technical concepts in both written and verbal formats 5. Contacts are primarily within the organization, with occasional customer contacts on routine issues 6. Works under general supervision for routine tasks of minor complexity 7. With supervision/mentorship, can coordinate the activities for lower level engineering staff
     
    Job Number: 6579
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 12/28/2016
    Last Updated: 02/07/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Consultant

    Description:
    Engineering Consultant assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services. Principal duties and responsibilities are to contribute to planning, developing and coordinating of important engineering projects. Provides specialized technical assistance to team members. Use advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems. Determines and develops own approach to solutions within schedule and cost objectives. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives. Acts as liaison with representatives outside of the assigned group/area Additional Functions. Actively works to improve daily processes and ensures all work meets customer requirements. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields. Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job • Advanced degree in engineering related field preferred •
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 11/10/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment and Furnishings Engineer

    Description:
    Equipment and Furnishings Engineer


    Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Long Term contract
    1st Shift



    Unique Skills:
    Applicant shall:
    - Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components.
    - Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements.
    - CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

    Education:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

    Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

    Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6802
    Job Location: Savannah, GA
    Rate: $58.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/23/2017
    Last Updated: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment and Furnishings Engineering Consultant

    Description:
    UNIQUE SKILLS
    APPLICANT SHALL
    Develop secondary structure, equipment and racks/panels to support the installation of Electrical Components. Have a working knowledge of Electrical Wiring Interconnect System (EWIS) as well as latest DO-160 requirements, internal/external lighting, antenna installations and other unique Electrical Installation requirements. CATIA V5 Work Bench capabilities should include Sheet Metal, part design and limited surfacing.

    JOB DESCRIPTION
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

    Position Purpose
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of client products and services.

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area

    ADDITIONAL FUNCTIONS
    1. Actively works to improve daily processes and ensures all work meets customer requirements
    2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    3. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering related field preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-648-83461
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 03/20/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    F-15 Combat Aircraft Training Specialist IV (MO)

    Description:
    Develops, delivers and conducts customer training events for combat specific trainees via highly interactive courseware in state of the art electronic classrooms and simulator training devices at company and/or customer facilities. Provides input for developing and modifying engineering data, flight manuals, defining training requirements, standards and curriculum, schedules and related documentation. Pursues continuous process improvement. Serves as training liaison with internal and external customers. Demonstrates extensive knowledge of combat aircraft aircrew operations and training to resolve complex planning, coordination and development of requirements for multiple aircraft blocks, types and models. Oversees all phases of combat aircraft ground training delivery. Evaluates technical design features/changes to the operation of the combat aircraft systems and subsystems to assist the development of the physical/functional fidelity requirements to be incorporated into the applicable flight training devices. Participates and interfaces with operational level combat aircraft customers, customer test aircrews, company test aircrews and company engineering expertise via Technical Interface Meetings; Man-Machine Interface Meetings; Program Management Reviews, Program Design Reviews, and status meetings.

    Experience as a Pilot or Weapons System Operator in the F-15E/K/S/SG/C is required. Requires minimum of 5 years’ experience as a high performance fighter/attack aircrew with appropriate experience as Wingman, Element Lead, Flight Lead, Instructor Pilot, Weapons System Operator; Flight Examiner, Mission Commander or Pilot in Command. Platform instruction experience is required. Strong communication skills, and experience with Microsoft Office Products is a plus. Must be willing to travel for short term assignments. Must have a US SECRET clearance or be able to obtain one.
     
    Job Number: F15MO
    Job Location: Berkeley, MO
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 11/22/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    FEMAP FEA Analyst

    Description:
    Aircraft

    Job location: Montreal, Quebec Canada
     
    Job Location: Canada
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    FEMAP FEA Analyst

    Description:
    Aircraft
     
    Job Location: North Dakota
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    FMS Test Engineer

    Description:
    POSITION ROLES AND RESPONSIBILITIES
    Sikorsky Aircraft is seeking candidates to support the Black Hawk helicopter program in the area of Avionics system integration. Primary technical responsibilities will be development and execution of automated and manual software test procedures of avionics systems including controls and displays, communication systems, navigation systems, and mission avionics systems for HH-60W/UH-60M/S-70i/S-70M aircraft.

    2-5+ years experience in developing and conducting formal requirements based testing of complex hardware / software systems is required. The candidate should be experienced in the use of digital bus analyzers, simulation techniques, and test automation techniques. Familiarity with the Black Hawk avionics and aircraft systems is desired. Knowledge of modern avionics architectures, components and system and software engineering processes is preferred.

    EDUCATION
    Bachelor of Science
     
    Job Number: 16-512-28077
    Job Location: Northeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facilities Assistants - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Facilities Assistants for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

    Job Duties:

    • Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
    • Monitors and replaces light bulbs in all assigned facilities, as needed.
    • Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
    • Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
    • Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
    • Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
    • Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
    • Responds to emergency situations for the purpose of resolving immediate safety concerns.
    • Performs other maintenance duties as assigned by the Facilities Supervisor.
    • Duties may require the self-performance of certain activities relating to projects
    • Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
    • Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
    • Review construction plans and detailed specifications to ensure alignment of project requirements.
    • Understand construction methods, materials, processes, and sequences of installation;
    • Assist in the logistics of contractor/supplier mobilization to perform work.
    • Assist in the coordination of contractor/supplier support for warranty repair execution;
    • Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
    • Complete/track work orders assigned by the Maintenance or Projects Supervisor.
    • Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
    • Coordinate/oversee contracted services during the performance of work.
    • Respond to equipment breakdowns and emergencies during off-hours.
    • Oversee and perform quality checks for planned work in the absence of supervisor.
    • Assist in the development of short interval schedules in coordination with planned work activities.
    • Perform other duties as requested or assigned.
    • Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators. Notifies Supervisor of corrective actions needed.
    • Adheres to safety policies, industrial practices.
    • Performs other duties assigned, including emergency call-in and shift rotation.

    Qualifications:

    • High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
    • Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
    • Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
    • CAD experience is a plus.

    Requirements:

    • Must be able to work any shift that client management determines necessary to support production demands.
    • Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
    • Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
    • Self-starter and team player.
    • Understand and follow oral and written instructions.
    • Ability to prioritize and manage multi-functional tasks.
    • Ability to work effectively under pressure, and against strict time constraints.
    • Knowledge of doors/hardware (locksets, door closures, frames).
    • Basic understanding to advanced knowledge of PLC systems.
    • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36316
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Facilities Technicians - Greensboro, NC

    Description:
    STS AeroStaff Services is currently hiring Facilities Technicians for open positions in Greensboro, North Carolina.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Individual will work closely with the Facilities Maintenance Coordinator and Facilities Supervisor to support facilities systems, building and grounds activities. In addition this individual will support the activities of other groups within the Facilities Department.

    Job Duties:

    • Monitors contractor performance and works closely with outside vendors and contractors to ensure work is completed according to specifications.
    • Monitors and replaces light bulbs in all assigned facilities, as needed.
    • Perform scheduled preventative maintenance on all electrical equipment and systems to include Switchgear, Motors, Transformers, VFD’s, Lighting and Overhead Cranes.
    • Performs routine preventative and corrective maintenance of building, grounds, heating and ventilation and air conditioning systems.
    • Overall responsibility for the maintenance and repair of building system infrastructure, including upkeep of buildings, grounds, equipment and electrical systems.
    • Provide basic maintenance and repair of plumbing systems as directed, to include repair of leaking fixtures, unclogging drains.
    • Troubleshoot, maintain and perform basic repair of minor building electrical problems, such as changing lamps, ballasts, fixtures, switches, outlets.
    • Responds to emergency situations for the purpose of resolving immediate safety concerns.
    • Performs other maintenance duties as assigned by the Facilities Supervisor.
    • Duties may require the self-performance of certain activities relating to projects
    • Individual will also be responsible for the self- performance of task related to the building and grounds maintenance.
    • Understand and review all phases of construction inspection, facility inspection, and project monitoring related to space planning and renovation.
    • Review construction plans and detailed specifications to ensure alignment of project requirements.
    • Understand construction methods, materials, processes, and sequences of installation.
    • Assist in the logistics of contractor/supplier mobilization to perform work.
    • Assist in the coordination of contractor/supplier support for warranty repair execution.
    • Inspect completed work for defects and compliance with priority, scheduling, and specifications/requirements.
    • Complete/track work orders assigned by the Maintenance or Projects Supervisor.
    • Interface proficiently with Company’s CMMS (Computerized Maintenance Management System).
    • Coordinate/oversee contracted services during the performance of work.
    • Respond to equipment breakdowns and emergencies during off-hours.
    • Oversee and perform quality checks for planned work in the absence of supervisor.
    • Assist in the development of short interval schedules in coordination with planned work activities.
    • Perform other duties as requested or assigned.
    • Assists with inspections on life safety systems to include but not limited to fire extinguishers, fire pumps, emergency lighting and power generators, back-up power systems and elevators.
    • Notifies Supervisor of corrective actions needed.
    • Adheres to safety policies, industrial practices. Performs other duties assigned, including emergency call-in and shift rotation.

    Qualifications:

    • High School Diploma or GED certificate with four or more years of progressive and practical experience in HVAC or electrical systems.
    • Degree or certificate in HVAC or an Associate’s of Science Degree or related technology with a minimum of two (2+) years of experience
    • Basic knowledge of facilities maintenance and repair concepts required. Basic computer proficiency (Microsoft Office programs). Clean driving record and criminal background history.
    • CAD experience a plus.
    • Must be able to work any shift that client management determines necessary to support production demands.
    • Must possess the ability to troubleshoot equipment and system breakdowns utilizing schematics, drawings and equipment manuals.
    • Must be able to effectively communicate (oral and written) with all employees, contractors and vendors.
    • Self-starter and team player.
    • Understand and follow oral and written instructions.
    • Ability to prioritize and manage multi-functional tasks.
    • Ability to work effectively under pressure, and against strict time constraints.
    • Knowledge of doors/hardware (locksets, door closures, frames).
    • Basic understanding to advanced knowledge of PLC systems.
    • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

    Requirements:

    • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
    • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
    • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
    • Read, hear, speak, and see with no restrictions, as required by job duties.
    • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
    • Effectively communicate in Business English language.
    • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
    • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 36317
    Job Location: Greensboro, NC
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flammability Engineer

    Description:
    The Flammability Engineer must have a good understanding of FAA regulation and a background in flammability testing and Certification. A flammability AR delegation under an ODA is preferred but not required


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:

    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/23/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flammability Engineer Tech Spec I

    Description:
    Flammability Engineer Tech Spec I

    Location: Savannah, GA
    Rate: $55.00 - $75.00/HR
    Long Term contract


    Unique Skills:
    - The successful candidate should have a good understanding of Interior Flammability certification requirements.
    - Having worked with AR's and an ODA is a plus.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6919
    Job Location: Savannah, GA
    Rate: $55.00 - $75.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 01/10/2017
    Last Updated: 01/17/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Controls Engineer-Tech Spec II

    Description:
    Flight Controls Engineer
    Savannah, GA
    Rate: $58-$63

    Unique Skills:

    The ideal candidate should have the following experience: Systems Engineering (BSEE) Hardware in the loop test experience Experience with data acquisition systems Experience with Simulation Tools


    Education and Experience Requirements:

    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6801
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/07/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Operations Aircrew Loadmaster - Secret

    Description:
    **Must have active secret clearance
    Minimum of 1000 hours as a C5 flight engineer, C5Mexperience required.
    Flight instructor and/or flight examiner experience FAA Class II medical FAA Airframes and Power Plant License preferred
    C5 Flight Engineer Flies as the flight engineer on production and test operations
    **Provides support as C5M FLIGHT ENGINEER position on company aircraft.
     
    Job Number: Lock-Loadmaster
    Job Location: Marietta, GA
    Rate: $48.00-$58.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/06/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Operations Aircrew Loadmaster for C-5 with active secret GA

    Description:
    Lockheed Martin Aero 0348
    Job Title: Flight Operations Aircrew Loadmaster for C-5
    Location: Marietta, GA 30063
    Compensation: 48-58/hr (DOE)
    Assignment Length: 12 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)
    Non-exempt
    1st Shift

    Description:


    Description

    Provides support as C5M
    FLIGHT ENGINEER position on company aircraft.

    Flies and supports developmental, engineering and production flight tests to determine compliance with specification and operational suitability.

    Acts as instructor aircrew for training of aircrew during syllabus training flights and may conduct classroom training of customer aircrew.

    Provides support to demonstration flights with customers, government officials, or other personnel aboard to exhibit aircraft systems performance and capabilities.

    Provides aircrew input and support to developmental and engineering teams, training, customer support and marketing teams regarding aircrew interfaces.

    Provides engineering and pilot input to training, customer support and marketing teams.

    Skill/Experience/Education
    Mandatory:

    Minimum of 1000 hours as a C5 flight engineer, C5Mexperience required.
    Flight instructor and/or flight examiner experience FAA Class II medical FAA Airframes and Power Plant License preferred

    Desired:

    C5 functional check flight experience FAA turboprop or turbojet flight engineer license Flight test experience

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    C5 Flight Engineer Flies as the flight engineer on production and test operations. 9-10 Years Yes
     
    Job Number: SW-0348
    Job Location: Marietta, GA
    Rate: 48-58/hr DOE
    Duration: 12 month contract
    Input Date: 01/11/2017
    Last Updated: 01/13/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 09/09/2017
    Last Updated: 10/06/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Avionics Electrical

    Description:
    PURPOSE
    To conduct avionics/electrical flight testing of the CH-53K aircraft at Pax River.

    JOB DUTIES
    1. Conduct pre-flight briefings and post flight de-briefings
    2. Provide in-flight test leadership
    3. Conduct data monitoring
    4. Reduce and Evaluate flight test data
    5. Write flight test reports
    6. Support system trouble shooting and root cause analysis

    EDUCATION AND EXPERIENCE REQUIRED
    7 + years' related experience
    Bachelor’s Degree in related field (E.E./Aeronautical Eng. etc...)

    OTHER ASSIGNMENT DETAILS
    Initial program/system familiarization will be at the Development Facility Center in West Palm Beach, FL.
     
    Job Number: 16-645-1469
    Job Location: Southeast
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 03/20/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Flight Test Engineer
    Menominee, MI
    12+ month contract

    Open to Entry Level AND Sr. level candidates!

    POSITION RESPONSIBILITIES


    This individual will work in the Experimental Engineering department and will be responsible for conducting R&D and certification ground/flight tests. The candidate will be responsible for test preparation, planning instrumentation installations, instrumentation and equipment calibration, programming data acquisition software, data reduction, and test reporting. He/she will assist in test conformities and TIA preparation, participate in FAA certification projects, support safety of flight briefings, and assist other Engineering Groups on an “as needed/as available” basis depending upon his/her other skills and abilities.


    Duties include but are not limited to the following:

    This individual will be responsible for R&D and certification ground/flight tests, including:
    •Reviewing proposed projects and developing compliance and test matrices
    •Planning, writing, and/or reviewing test plans and reports
    •Programming data acquisition software
    •Data reduction
    •Planning aircraft flight and ground test instrumentation installations
    •Instrumentation and equipment calibration
    •Conducting weight and balance and maintaining records
    •Conducting ground/flight tests, including pilot coordination and pre/post flight briefings as required
    •Coordination and preparation of test conformities and TIA activities




    REQUIRED KNOWLEDGE, SKILLS AND ABILITIES
    •Minimum of a Bachelor’s of Science degree in Aerospace Engineering, Engineering Physics, or related field.
    •An understanding of aircraft structure and systems, rotorcraft dynamics, aerodynamics, and powerplant.
    •An understanding of FAA rules, regulations, and certification processes.
    •An understanding of and ability to write test practices and procedures.
    •Experience with strain gauges, instrumentation, and wiring.
    •Intermediate understanding of data acquisition software (LabView and/or Matlab preferred).
    •Advanced computer skills (MS Word, Excel, PowerPoint, Project).
    •Superior problem solving skills.
    •Superior communication skills (verbal and written).
    •An ability to work multiple projects and multi-task.
    •Proven organizational skills.
    •Works with minimal supervision
    •Ability to work within a team
    The following are desirable, but not required:

    •FAA A&P License
    •FAA Pilot License
    •Understanding of Microsoft Access
    •Basic design skills (SolidWorks, CADKey)
     
    Job Number: 51046
    Job Location: Menominee, MI
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12+ months
    Start Date: 1/23/16
    Input Date: 01/11/2017
    Last Updated: 01/16/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

    The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

    Job Duties and Responsibilities (Essential Functions):

    � Provide instrumentation services: to include:
    o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
    � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


    Knowledge/Skills/Abilities:
    � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
    o Electrical and avionics design,
    o Data Systems Design Principles
    o Telemetry
    o Air data booms (straight nose and swivel-head)
    o Static trailing cones
    o Sensitive aircraft instruments
    o Cockpit displays
    o End-user interface
    o Portable test equipment such as hand-held stick force gauges
    o High-end GPS receivers and antennas for precise aircraft positioning
    o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
    o Pressure transducers
    o Flowmeters
    o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
    o Strain gauges, load cells, force transducers, torque sensors
    o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
    o Video recording equipment
    o Signal conditioners
    o Data acquisition systems and data loggers
    � Intermediate knowledge of flight test operations and flight certification.

    Level Requirements (Minimum):
    Education
    � Formal Instrumentation Training (Military or Civilian) � Preferred
    � BS in Engineering or equivalent experience

    Experience
    � 5+ years relevant technical experience
    � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 03/15/2017
    Last Updated: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    DUTIES:

    � Develop System Test Plans, execute simulator and system flight tests, and document test results. This includes determining, communicating, and documenting flight test objectives, and developing test cards accordingly.
    � Participate in flight readiness reviews, test event briefs, and post-test debriefs with UAV Operators and Observers.
    � Coordinate the use of test ranges with UAV Operators and Observers.
    � Ensure test assets are prepared to support testing, including checking that product hardware and software are properly configured, test cards and procedures are written, equipment is operational, batteries are charged, etc.
    � Participate in test activities, fill in test data sheets, and transfer telemetry files to the network.
    � Debrief engineering and management team on results of flight and simulator tests.
    � Capture test failure details in defect reports, using an issue tracking system, like Bugzilla or JIRA.
    � Position may require up to 25% travel.

    QUALIFICATIONS:
    � Bachelor�s Degree (strongly preferred) from an accredited University in Electrical Engineering, Software Engineering, Aerospace Engineering, or a related discipline.
    � 7+ years of experience in multiple engineering projects including research and development efforts, with a focus on unmanned aircraft systems, simulation, integration, and test. Demonstrated ability to successfully contribute to successful short term projects (3 � 9 months).
    � Familiarity with unmanned aircraft systems, including avionics, power, and Ground Control Stations (GCS�s).
    � Minimum 3 years of experience conducting system tests or flight tests.
    � Ability to develop ad hoc tests to troubleshoot test failures.
    � Ability to analyze test data using software tools like MATLAB or Excel.
    � Desired hands on lab experience in test engineering, including use of test and measurement equipment.
    � Strong computer skills including Microsoft Office, engineering analysis tools (e.g., MATLAB, Simulink), and software development environments (e.g., Visual Studio).
     
    Job Location: Simi Valley, CA
    Rate: Open
    Duration: 6 months potential to be Permanent
    Start Date: Immediate
    Input Date: 11/11/2016
    Last Updated: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineers - Secret

    Description:
    **Must have Active Secret Clearance
    Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.
    Aircraft maintenance experience at a supervisor level.
    Experience in Fault Isolation.

    Desired Skills: Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
     
    Job Number: Lock-Flight Test
    Job Location: Patuxent River, MD
    Rate: $40.00-$50.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/06/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/ORL
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 02/19/2017
    Last Updated: 02/28/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/SEA
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 10/27/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Technician

    Description:
    This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
    Responsibilities:
    � Reading and creating wire diagrams.
    � Selecting or auditing appropriate sensors given engineering requirements.
    � Working with customers and engineers to define appropriate instrumentation requirements.
    � Designing instrument installations and creating installation instructions.
    � Instrumentation installation.
    � Evaluating instrumentation installations for function and safety.
    � Troubleshooting instrumentation problems.
    � Data acquisition system operation.
    � Documenting data system practices and procedures.
    � Generating instructions and operation manuals.
    � Developing sensor calibration and functional test procedures.
    � Maintaining calibration records.
    � Domestic and international travel may be required.
    Desired Qualifications:

    � 3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
    � Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
    � Ability to work interdependently, and lead small groups.
    � CATIA V experience beneficial.
    � Experience with data processing and analysis beneficial.
    � Computer programming experience beneficial.
    � Proficient in working with Microsoft Office applications including Word and Excel.
    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Moses Lake, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 12/28/2017
    Last Updated: 01/23/2018
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test with active secret MD

    Description:
    Lockheed Martin Aero 0322
    Job Title: Flight Test
    Location: PAX River, MD 20670
    Compensation: 40-50/hr (DOE)
    Assignment Length: 10 + month contract
    Security Clearance Secret (Prime Contract:N00019-02-C-3002, Can start w/o clearance:No, Interim Clearance Sufficient:Yes)
    Non Exempt
    3rd Shift

    Description:

    Flight Test Control Engineer for Navy F-35 test aircraft at Patuxent River NAS, Maryland. The successful applicant will provide Flight Test Ground and Flight Operations engineering support.

    Tasks will include coordination and execution of pre-flight and post-flight activities to ensure aircraft's test readiness including issuance, and closure of documentation relating to work performed on the aircraft, and coordination of aircraft modifications.

    Position is responsible for control and tracking of aircraft configuration, coordinating and staging of support equipment, and coordinating with other organizations associated with test readiness.

    Skill/Experience/Education
    Mandatory:

    Experience in control and tracking of aircraft configuration, coordinating and staging of support equipment, along with coordinating with others organizations.Aircraft maintenance experience at a supervisor level.

    Experience in Fault Isolation.

    Demonstrated Verbal and Written Communication skills across all levels of management. Ability to travel as required.

    Desired:

    Flight test control engineering experience to include: applications and electronic tools: JEDI, ATLAS, PDM, and JDL and wiring diagrams; aircraft ground test experience.
     
    Job Number: SW-0322
    Job Location: Pax River, MD
    Rate: 40-50/hr DOE
    Duration: 10 months +
    Input Date: 01/11/2017
    Last Updated: 01/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Graphics Designers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Graphic Designers for open positions in Melbourne, Florida.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Assist with development and implementation of graphic materials for the worldwide marketing and sales teams. Interface with external creative agencies and graphics department as required. Ensure consistent corporate branding and product image quality.

    Job Duties:

    • Assist in development and implementation of worldwide graphic design strategies in conjunction with creative agencies to promote the client’s brand.
    • Plan creative concepts by gathering information and materials.
    • Manage digital assets: images touch up and post-processing, naming convention, managing the library (upload new assets, remove outdated ones, etc)
    • Provide creative direction and best practices advice on design layout and project’s technical specifications.
    • Ensures brand identity guidelines are being followed consistently worldwide.
    • Create and implement worldwide graphic marketing materials and presentations in both print and digital formats, including website graphics, print ads, email campaigns, signage, trade-show displays, invitations, photographs, videos and digital kiosks.
    • Create, update and enhance graphical depictions of aircraft performance, range maps, charts, etc. to promote the client brand.
    • Create, update and enhance presentations for the worldwide sales and marketing team.
    • Partners with other internal departments and third-party vendors for all creative and production needs.
    • Interface with Authorized Sales Representative (ASRs) and other departments to ensure any outside graphic development maintain client’s global branding guidelines.

    Qualifications:

    • BA or BFA Degree majoring in Graphic Design, with a concentration on web design fundamentals.
    • Minimum 1-5 years’ experience in graphic design and front-end web design required.
    • Fundamental understanding of visual design methods, philosophies and techniques
    • Experience with luxury products or similar services.
    • Aviation or Yachting experience preferred but not required.
    • Solid, well-organized portfolio of previous and recent work.

    Requirements:

    • Essential competency using most current versions of design software: InDesign, Photoshop, Illustrator (Adobe CS6 or Creative Cloud).
    • Working competency with HTML, CSS and other web graphic standards.
    • Good understanding of typography methods and applications.
    • Adobe After Effects, Premiere and Flash experience will be helpful, but not required.
    • Javascript or other software programming skills will be helpful, but not required.
    • Any 3D software skills and experience will be helpful, but not required.
    • Proficient in PowerPoint, Word and Excel.
    • Excellent skills with Photoshop, Illustrator and other graphic and layout software.
    • Good written and verbal communication skills.
    • Relevant experience with Digital Asset Management practices.
    • Competency of photography skills and practices preferred but not required.
    • Excellent organizational and interpersonal skills.
    • Self-starter.
    • Ability to travel domestically and internationally to support the marketing and sales departments. 10%-15% travel may be required.
    • Commitment to company values and compliance with department norms, policies, directives, and procedures.
    • Incorporates Lean and P3E processes and concepts into daily activities.
    • Strives for continuous improvement to processes and procedures.
    • Honors and protects confidential and proprietary documents and information.
    • Satisfies work schedule requirements.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 30352
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Engineer

    Description:
    Ground Test Engineer - 2 Year Contract for our client in Stratford, CT!

    Role & Responsibilities

    Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.

    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.

    Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
    Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.

    A large portion of the job is oversight of supplier performed component qualification efforts.

    Previous experience in this area is recommended.
    Education:

    Bachelor of Science
     
    Job Number: 352694
    Job Location: Stratford, Ct.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 11/21/2016
    Last Updated: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Human Factors Engineer

    Description:
    Human Factors Engineer

    Location: Savannah, GA
    Rate: $70.00 - $80.00/HR
    Long Term contract


    Unique Skills:
    - Provides guidelines in application of Human Factors (HF) requirements to equipment design during all stages of the design process, from concept definition through detailed design.
    - Applies structured quantitative or subjective methods to generate HF requirements and ensures human centered design and optimum usability in the operation, maintainability, and/or manufacturing of aircraft systems.
    - Leads and/or performs structured test plan development and analysis of full and part task simulations using prototyping tools to obtain early, multiple user feedback for HF requirement definition.
    - Provides analysis of detailed design concepts to functional teams through the use of modeling techniques for reach and force requirements for a wide anthropometric range of individuals of a targeted population.
    - Holds multidisciplinary review meetings as needed to clarify analysis goals.
    - Creates specific project milestones that can be integrated in the overall group product plan and schedule.
    - Creates and supervises pilot workload assessments through measurement techniques such as rating scales, questionnaires, and flight technical error analysis.
    - Generates estimates of procedural human error using task analysis and human error analysis methods.
    - Collaborates on the coordination and development of facilities and/or technology to support simulation testing.
    - Creates flight test plans and reports, engineering reports and/or memos to substantiate compliance with human factors certification regulations
    - Develops trade studies on system design concepts and presents human factors recommendations to multidisciplinary design teams and upper management.
    - Minimum a Bachelor degree (a Master degree is preferred) in a related area (e.g. Human Factors Engineering, Human Factors Psychology, Industrial Engineering, Human Computer Interaction, Aerospace Engineering) or equivalent combination of appropriate education experience
    - Minimum of ten years in Human Factors, or fifteen years with exceptional broad qualification in several related disciplines (aviation/aerospace experience is preferred)
    - Experience with simulation software is an advantage (e.g. CATIA V5 Human Builder, 3DSSPP, iData)
    - Experience with requirements management tools is an advantage (e.g. DOORS)
    - Flying experience is an advantage (e.g. PPL, CPL, ATP)


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:

    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:

    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6906
    Job Location: Savannah, GA
    Rate: $70-$80
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 02/15/2017
    Last Updated: 03/08/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 03/22/2017
    Last Updated: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design, Electro-Mechanical Systems Engineer/TSII

    Description:
    UNIQUE SKILLS
    Basic understanding of Hydraulics as it applies to aircraft is required. Use of CATIA or similar 3D CAD system is required. Experience with Hydraulic Design preferred. Experience with CATIA tubing work bench is preferred. Experience with designing for compliance to FAR 25.1435 is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-629-78841
    Job Location: Southeast
    Rate: $60.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 07/13/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Industrial Engineer III

    Description:
    OCCUPATIONAL SUMMARY
    Provide support to leads and operators in the assembly and/or fabrication areas. Provide information and support for process improvement. Plan, structure and implement manufacturing programs.
    Support manufacturing assembly and fabrication to trouble shoot both assembly and fabrication problems. This requires close interaction with assembly personnel, fabrication personnel, and their supervision. Must support all lean manufacturing improvements and may require participation in lean improvement activities. Must also work closely with Quality Assurance, Program Management, Engineering, and shop Managers to resolve quality issues, increase productivity, and eliminate ergonomic problems.

    AN INDUSTRIAL ENGINEER III MUST EXHIBIT THE FOLLOWING CHARACTERISTICS
    A documented history of supporting manufacturing fabrication and assembly departments in identifying and resolving production problems and issues.
    Demonstrates the ability to facilitate continuous improvement in the production process.
    Must be experienced in interacting closely with personnel at all levels of the manufacturing system, including supervision and management.
    Must be able to assume a leadership position in regard to Lean Manufacturing improvement projects, and exhibit a record of actively supporting past projects.
    Must be capable of interacting regularly and cooperatively with Quality Assurance, Program Management, Engineering, and Production Management to resolve quality, productivity, ergonomic and safety issues.
    Must be capable of initiating improvement projects resulting in labor, material, space, manpower, and/or other measurable cost reductions.
    Must have a working knowledge of current 6S factory practices
    Should be familiar with company policies regarding worker safety and have demonstrated the ability to identify and resolve safety issues in the workplace.
    Knowledgeable of Life Safety Code as it applies to manufacturing layouts.
    Must have demonstrated above average capability for developing engineering analysis.
    Must have knowledge of basic material handling principles and products
    Must be capable of developing special projects that are reviewed at the Zodiac level.
    Uses statistics as a normal tool for resolving issues.
    Leads or assists process improvement teams.

    DUTIES AND RESPONSIBILITIES
    Provide support to leads and operators in the assembly and fabrication areas.
    Analyze parts and seat flow.
    Conducts labor and machine time studies, operator work and motion studies, material and work flow studies in order to suggest and implement more economical and efficient manufacturing practices. Uses gathered data to establish and publish Standard Labor and Machine Data, and to calculate manpower and machine requirements.
    Balance the lines or cells and implement procedures and/or operator instructions to support process improvement.
    Participate to the implementation of structure and plan manufacturing programs (Lean Manufacturing, Set-up Reduction, 6S, Cost Reduction).
    Apply statistical data analysis in normal duty activities.
    Measures, analyzes, and adjusts Factory Floor Layout to achieve optimum manufacturing productivity as directed by Lean Manufacturing practices, subject to managerial approval.
    Design of major layouts with product flow, material handling considerations, and infrastructure provisions.
    Creates and documents Standard Work Instructions for use by factory personnel, in compliance with design and quality specifications and FAA directives
    Participates in training shop personnel in new and/or updated processes, including Lean Manufacturing practices and improvement implementations.
    Introduces new production processes and equipment.
    Participate on concurrent engineering teams and verify adequacy/optimization of design in regard to weight and cost restrictions.
    Collaborates with engineering design personnel to influence product design and thus provides for good production methods and economical tooling.
    Analyzes engineering design documents, prototypes and/or engineering change orders and determines if an assembly or fabricated part can be manufactured. Communicates back to engineering and/or R&D to discuss needed changes.
    Reviews and approves new and revised engineering drawings through the drawing release system.
    Reviews changes in engineering design, planning, tooling, and NC programming to determine impact on current processes, methods and work instructions. Follows through with updating standard data and standard work instructions per such changes.
    Investigates serious or recurrent production difficulties and delays due to such factors as faulty methods, tooling, operational sequences, or inadequate facilities or layouts.
    Frequently contacts supervisory and non-supervisory personnel in engineering, production planning, tool design and other departments for the purpose of discussing production problems in order to secure necessary information or consider factors which may interfere with the effectiveness of production. Takes preventive or corrective action to remedy the problem or refer it to others who may be more directly responsible.
    Develops new ideas and methods, and recommends changes in existing tooling to secure the most economical production. Submits cost reduction ideas.
    Continuously analyzes current processes, tooling and methods in the factory for labor and/or cost reduction opportunities. Documents such opportunities and submits suggestions for managerial approval. Implements all approved suggestions. Investigates new manufacturing processes and plans implementation, including acquisition of new equipment and/or facilities.
    Completes all assignments aimed at determining optimal methods and processes for manufacturing designated company products.
    Establishes and maintains interaction with outside vendors with a view to improvement opportunities relating to equipment and processes. Makes investigative visits to such vendors when required.
    Cooperates with Safety and Health personnel to optimize factory safety conditions, and with Energy personnel to monitor and optimize energy and fuel usage within the facility.
    Manages significant cost capital projects including identification of equipment, justification of capital, and ensures schedule and installation is per plan.
    Uses published Master Schedule and Production Requirements data to develop manufacturing capacity analyses for all of the manufacturing departments and work centers involved in meeting the Production Plan. Regular electronic reports will be presented to upper management for determining actions for solving any capacity issues.
    Prepares regular Manpower reports to relay information regarding manufacturing departments or work centers that are in need of employee and/or equipment adjustments.
    Prepares Manpower/Capacity/Forecast reports for aircraft manufacturers (i.e. Boeing, Airbus, etc.) to relay the companys production capability to manage future commitments.
    Maintains a current electronic listing of all active manufacturing work centers.
    Makes regular oral and written reports and/or presentations to supervisory and managerial personnel on any of the above activities.

    QUALIFICATION REQUIREMENTS
    KNOWLEDGE AND SKILLS
    Requires sufficient training to permit ready comprehension of problems having to do with production methods and facilities.
    Must be capable of preparing well-written and orderly reports.
    Must have sufficient knowledge of manufacturing and related operations with detailed knowledge of such fields as product design, engineering function, tool design, tool fabrication, space layout, handling equipment, production machinery and equipment, NC machinery and equipment, factory methods work, etc.
    Must have knowledge of trigonometry, algebra and statistics.
    Must be proficient in inventory management, product data management, monitoring production control and cost, and in manufacturing resource planning.
    Strong knowledge of motion and time study principles
    Knowledge and experience in Lean Manufacturing.
    Strong PC skills, knowledge of all Microsoft software
    Able to lead teams of people towards focused and defined objectives
    Strong Working knowledge of AutoCad
    Strong knowledge of motion and time study principles

    EDUCATION AND/OR EXPERIENCE
    MUST HAVE ONE OF THE FOLLOWING
    Must have a B.S degree in a related technical field (e.g.: IE, ME, EE) or an Associate degree with 3 years related experience or 6 years of job related experience.
    Additionally 12 years of manufacturing/industrial engineering experience.
    State registered professional engineers license in BSME, BSMfgE, BSEE, or BSIE and twelve (12) years of manufacturing experience.

    COMMUNICATION SKILLS
    Strong leadership and communication skills. Ability to communicate with all levels of management, peers, operators and customers. Must have the ability to generate written communication and to operate required office equipment. Must be able to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.
    Must be capable of communicating electronically via email. Must have working knowledge of Excel, Word, PowerPoint and other applicable computer softwares.

    REASONING ABILITY
    Ability to think strategically and resolve problems. Must be able to make decisions. Must be able to interface with other departments and vendors.

    PHYSICAL DEMANDS
    This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

    Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
     
    Job Number: 16-611-7927
    Job Location: South-central
    Rate: $70K to $90K
    Per Diem: No
    Overtime: Possible
    Duration: DIRECT
    Start Date: ASAP
    Input Date: 01/31/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Strain Gage Technician

    Description:
    Instrumentation Strain Gage Technician

    Assignment (Contract): 1 year
    Location: Stratford, CT
    Industry: Aviation/ Aerospace
    2 openings 1st and 2nd shift

    Position Roles & Responsibilities:
    Candidate must have 7 to 10 years� experience. Strong strain gage installation experience required to support ongoing Engineering Flight and Ground test operations. Must have knowledge of strain Gage Bridge wiring methodology. Must be able to Select, Apply, and Wire strain gages to aircraft and facility components manufactured from of a variety of metals and composites.

    Must have experience and ability to accomplish required surface preparation, gage measurement, layout, alignment and bonding.

    Must have experience with measurement systems, instrumentation wiring and documentation.
    Supplier Instructions & Candidates Details
    Notes to suppliers: Contractors must be able to provide current LO/TO Authorized certification (OSHA 1910.147) prior to starting assignment. If the candidate is unable to provide current and acceptable documentation of proof of their LO/TO Authorized knowledge the below online course must be taken and certification of completion must be provided prior to beginning assignment.�
     
    Job Number: 352697
    Job Location: Stratford, CT.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 11/21/2016
    Last Updated: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instumentation Strain Gage

    Description:
    Johnson Service Group is seeking an Instrumentation Strain Gage Technician for a 12+ month contract opportunity in Stratford, CT!!!

    1ST AND 2ND SHIFTS AVAILABLE

    Description: Skills/Experience Required

    7 to 10 years� experience doing the exact skills required for this position.
    Strong strain gage installation experience required to support ongoing Engineering Flight and Ground test operations.
    Must have knowledge of strain gage bridge wiring methodology.
    Must be able to Select, Apply, and Wire strain gages to aircraft and facility components manufactured from of a variety of metals and composites.
    Must have experience and ability to accomplish required surface preparation, gage measurement, layout, alignment and bonding.
    Must have experience with measurement systems, instrumentation wiring and documentation.
    Education/ Certifications

    High School Diploma or GED minimum
    Contractors must be able to provide current LO/TO Authorized certification (OSHA 1910.147) prior to starting assignment. If the candidate is unable to provide current and acceptable documentation of proof of their LO/TO
    Authorized knowledge the following online course must be taken and certification of completion must be provided prior to beginning assignment.�
     
    Job Number: 352698
    Job Location: Stratford, CT.
    Rate: Open
    Per Diem: If Qualified
    Overtime: Possible
    Duration: 1 YR +
    Start Date: ASAP
    Input Date: 11/21/2016
    Last Updated: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker

    Description:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations is preferred.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
    7. Actively works to improve daily processes and ensures all work meets customer requirements
    8. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
     
    Job Number: 24-145
    Job Location: Savannah, GA
    Rate: $55 to $57
    Per Diem: YES
    Overtime: YES
    Duration: 1 year+
    Start Date: ASAP
    Input Date: 10/27/2016
    Last Updated: 01/30/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker (Catia V5)

    Description:
    Ideal Candidates will have 2-D Drawing and 3-D Model Checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System
     
    Job Number: 24-173
    Job Location: Savannah, GA
    Rate: $58 to $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 04/24/2017
    Last Updated: 05/11/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    Landing Gear System requirements verification and validation (ARP4754).
    Prepare and review test specifications, procedures and test reports.
    Support flight test and ground test activities.
    Analyze test data and evaluate system operation.
    Provide engineering input to technical reviews
    Identify and communicate technical risks for the landing gear system
    Support overall certification effort for the landing gear system

    Desired Qualifications:

    Landing Gear/Brakes anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    Aircraft flight test certification program experience.
    Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    Knowledge of materials, mechanical systems, and failure mechanisms
    Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Ability to represent the client professionally and positively during client interactions and meetings.
    Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: LA
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 01/08/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lynn Launer
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Land/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 03/15/2017
    Last Updated: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: open
    Per Diem: yes
    Overtime: no
    Start Date: asap
    Input Date: 03/15/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Management Analyst - 3 CA

    Description:
    Logistics Management Analyst - 3 (Job Number: 16024560)

    Number of Openings: 1

    Location(s): United States-California-El Segundo


    Shift: 1st Shift

    Target Start Date: Dec 30, 2016

    Rate: $46/hr.

    Duration: 6 months

    Work Week: 9/80

    Northrop Grumman Aerospace Systems is seeking a Logistics Management Analyst for the F/A-18 program located in El Segundo, CA.

    The candidate will be assisting with the management of retrofit changes to delivered F/A-18 A-G aircraft from contract award through engineering development, kit part accumulation and kit Validation and Verification. Ensure affected functions maintain schedule to support engineering development and kit delivery. Report to Program Management the status of same. Track financial performance of each Engineering Change Proposal (ECP) and report to Program management monthly. The candidate will also develop the L-58 data package from released Post Production engineering and deliver to Boeing in accordance with the established delivery schedule.

    The Candidate will respond to Requests for Quotes from the customer for retrofit changes to the F/A-18 A-G aircraft. Coordinate with the proposal manager regarding all aspects of the change in order to provide cost effective estimates for the Post Production organization.

    The Candidate must be able to communicate clearly verbally and in writing, and work with all affected organizations throughout the program to ensure on time schedule performance. Candidate must also be able to provide recommendations regarding process improvements.


    Basic Qualifications:

    Technical BS Degree with 6 years’ experience, 4 years’ experience with Master’s Degree.


    Preferred Qualifications:

    F-18 aircraft experience

    - Prior experience with post production support of military aircraft
    - Extensive logistics or prior military experience
    - Understanding of engineering drawings and engineering release process
    - Competent user of Microsoft Products
     
    Job Number: MB-16024560
    Job Location: El Segundo, CA
    Rate: 46/hr max
    Duration: 6 month contract
    Input Date: 12/28/2016
    Last Updated: 01/12/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Logistics Management Analyst - 3 CA

    Description:
    Logistics Management Analyst - 3 (Job Number: 16024560)

    Number of Openings: 1

    Location(s): United States-California-El Segundo


    Shift: 1st Shift

    Target Start Date: Dec 30, 2016

    Rate: $46/hr.

    Duration: 6 months

    Work Week: 9/80

    Northrop Grumman Aerospace Systems is seeking a Logistics Management Analyst for the F/A-18 program located in El Segundo, CA.

    The candidate will be assisting with the management of retrofit changes to delivered F/A-18 A-G aircraft from contract award through engineering development, kit part accumulation and kit Validation and Verification. Ensure affected functions maintain schedule to support engineering development and kit delivery. Report to Program Management the status of same. Track financial performance of each Engineering Change Proposal (ECP) and report to Program management monthly. The candidate will also develop the L-58 data package from released Post Production engineering and deliver to Boeing in accordance with the established delivery schedule.

    The Candidate will respond to Requests for Quotes from the customer for retrofit changes to the F/A-18 A-G aircraft. Coordinate with the proposal manager regarding all aspects of the change in order to provide cost effective estimates for the Post Production organization.

    The Candidate must be able to communicate clearly verbally and in writing, and work with all affected organizations throughout the program to ensure on time schedule performance. Candidate must also be able to provide recommendations regarding process improvements.


    Basic Qualifications:

    Technical BS Degree with 6 years’ experience, 4 years’ experience with Master’s Degree.


    Preferred Qualifications:

    F-18 aircraft experience

    - Prior experience with post production support of military aircraft
    - Extensive logistics or prior military experience
    - Understanding of engineering drawings and engineering release process
    - Competent user of Microsoft Products
     
    Job Number: MB-16024560
    Job Location: El Segundo, CA
    Rate: 46/hr max
    Duration: 6 month contract
    Input Date: 12/28/2016
    Last Updated: 01/12/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MP&P Technical Analyst III - Aircraft Structures Assembly - PA

    Description:
    Evaluates parts, materials, processes, technology or equipment through research and testing to ensure safety, reliability and adherence to requirements and specifications. Analyzes failed parts and processes to reduce or eliminate future failures. Generates test plans, identifies and categorizes failures, determines root cause and documents results and recommendations. Proposes, develops and validates revisions to procedures and specifications. Determines suitability of parts, materials and processes. Determines suitability of parts, materials and processes and coordinates resolution of issues with suppliers and customers. Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology. Provides knowledge and technical consultation to internal and external customers. Works under general direction.

    Additionally...
    Required intermediate experience with Aircraft structures assembly
    Required intermediate experience with Assembly Process
    Required intermediate experience with Oral and Written
    Communication Skills
    Required intermediate experience with Ability to Read Engineering Drawings
    Required intermediate experience with Aircraft structures assembly
    Required intermediate experience with Assembly Process

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
     
    Job Number: MP&PTechPA
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 12/02/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintainability Engineer III

    Description:
    Maintainability Engineer III
    Savannah, GA
    Rate: $67

    Unique Skills:

    Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.


    Education and Experience Requirements:

    Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience sufficient to perform the essential functions of the job. A&P license preferred. Six (6) years of Maintenance Programs/Maintainability experience or aircraft maintenance and operational experience.

    Position Purpose:

    Responsible for participating in the planning, development, and sustainment of Gulfstream Aircraft Maintenance Programs and related issues regardless of complexity.

    Principal Duties and Responsibilities:

    Essential Functions: 1. Share responsibility for planning, developing, and sustainment of new and existing Aircraft Maintenance Programs and engineering projects of major complexity within established scope, meeting requirements of FAR 25.1529 or other applicable regulatory directives. 2. Maintain a current knowledge of developments in the field of specialty and/or other related aircraft fields and provide recommendations to department management for process/procedure changes to prepare for new standards and implementation of new methodologies. 3. Meet cost and schedule requirements while ensuring accuracy and consistency. 4. Develop standards and guides to support Maintenance Programs activities. 5. Mentor other team members in areas relative to Maintenance Programs processes and procedures. 6. Engage with internal/external stakeholders to ensure department deliverables are being met or exceeded. 7. Recommend innovations that improve collaboration, communication, quality, and/or effectiveness of product. 8. Review, and provide feedback on written work of team members. 9. Perform other duties as assigned.

    Other Requirements: 1. Demonstrated in-depth knowledge of MSG-3 and Maintenance Review board (MRB) processes and methodology.
     
    Job Number: 6825
    Job Location: Savannah, GA
    Rate: $67
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/07/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintenance Controllers - Addison, TX

    Description:
    STS AeroStaff Services is currently hiring Maintenance Controllers for open positions in Addison, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Perform accounting support duties including processing of vouchers, reconciling accounting transactions, and maintaining files. Applies accepted procedures to the preparation and maintenance of financial and business transaction data, and prepares reports to ensure accurate accounting records.

    Job Duties:

    • The Maintenance Control team provides surveillance, control, and direction for all aircraft maintenance 24 hrs a day, 7 days a week as well as effects aircraft repair.
    • Monitor the daily operation relative to plan, coordinating related maintenance activities and providing assistance in preventing or minimizing schedule interruptions due to maintenance requirements.
    • Coordinate with Flight Following, Flight Crew, Mechanics, Planning and Stores, the requirements to maintain flight schedule in accordance with procedures in the GMM
    • Develop total nightly workload packages and balance workload with regard to required and available resources.
    • Initiate MEL tracking numbers track MEL to keep within limits and log information.
    • Keep maintenance stations informed of MEL item coming through their respective stations.
    • Perform scheduled maintenance to keep aircraft in peak operating condition.
    • Initiate repairs/replacement to acceptable or approved technical data and instructions.
    • Tests, inspects and checks all repairs/installations to ensure proper operation. Conducts repairs in a time-efficient manner.
    • Provide technical assistance to contract agency maintenance personnel to assist with the maintenance operation.
    • Plan and schedule lower level maintenance checks and non-routine maintenance work.
    • Initiate, prepare and inform QC of MEL escalation.
    • Prepare reports concerning pertinent aspects of aircraft maintenance operation and for identification of issues requiring special attention.

    Qualifications:

    • Certificated A&P mechanic.
    • 3+ years’ experience in heavy line maintenance of transport category aircraft, preferablyDC-9/MD-80/737 series.
    • Familiarity with FAA 121/145 regulations.

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 35101
    Job Location: Addison, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer

    Manufacturing Engineer must have experience with aircraft major structural assemblies/installations. Experience with Soloumina, Smarteam, Catia V5 preferred.
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 09/08/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    Manufacturing Engineer

    Description:
    CATIA, aircraft systems
     
    Job Location: Southeast
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    Manufacturing Engineer

    Description:
    Aircraft experience, CATIA V5
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: sclark@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineers - Melbourne, FL

    Description:
    STS AeroStaff Services is currently hiring Manufacturing Engineers for open positions in Melbourne, Florida.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Description:

    The Manufacturing Engineer creates and administers the overall planning for the facility activities from components receiving to the delivery of finished aircraft including productive activities and its support processes.

    Job Duties:

    • Prepare and manage short, medium and long term production planning.
    • Ensure effective measurements and visibilities of inputs and outputs for the relevant processes to assure goals are achieved and cost objectives are met.
    • Perform continuous evaluation of critical resources to avoid bottlenecks.
    • Compile reports on the progress of work and on production problems.
    • Control work load and work capacity.
    • Plan and coordinate actions to implement product changes.
    • Coordinate actions for earlier deviations recovery and prevent impacts on company targets and obligations.

    Qualifications:

    • Must have Bachelor’s Degree in Industrial, Process, or Aeronautical Engineering.
    • A degree in management or business administration a plus.
    • APICS (Advancing Productivity, Innovation and Competitive Success) certificate a plus.
    • Must have at least 5-7 years’ experience in similar activities (planning or production planning).
    • Prior aircraft manufacturing/maintenance and repair experience preferred.
    • Prior Design experience preferred.

    Requirements:

    • Comprehension, understanding and execution of broad practices associated within the field assigned and related fields.
    • Applies these understandings in the completion of complex work assignments.
    • Experience in an aircraft production environment.
    • Project management & risk analysis experience.
    • Proficiency with planning practices and tools.
    • Strong organizational skills.
    • Strong verbal and written communication skills.
    • Utilization of Lean Production concepts.
    • Systemic vision.
    • Data analysis and consolidation.
    • Cope with deadlines and other pressured situations.
    • Interact with senior management, and staff.
    • Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.
    • Ability to work flexible hours and different shifts if required.
    • Employees will be subject to the random drug and alcohol testing under FAA regulations.
    • Commitment to company values and complies with department norms, policies, directives, and procedures.
    • Incorporates Lean and P3E processes and concepts into daily activities.
    • Strive for continuous improvement to processes and procedures.
    • Honors and protects confidential and proprietary documents and information.
    • Satisfies work schedule requirements.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37240
    Job Location: Melbourne, FL
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/05/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer III - MP&P Engineer (PA)

    Description:
    MP&P Engineer 3 Assignment
    Defines requirements for materials, parts and processes used in the manufacture of products. Produces specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Works under general direction.

    Additionally…
    The main focus of this assignment will be CH47 Chinook factory support. This includes being co-located on the factory floor working with existing processes and equipment associated with the rotorcraft production line, identifying effective manufacturing technology (processes, tools and equipment) to accomplish the build work statement, supporting repair of defective conditions on the aircraft, project management skills, specifically for projects that develop and insert manufacturing technology into current or future build process, and daily interaction with shop personnel. Identify safety and ergonomic improvements. Provide portable and perishable tool recommendations.

    MORE SPECIFIC ASSIGNMENT QUALIFICATIONS:
    _Ability to work with factory mechanics, as well as other organizations such as ME, QA, IE and Engineering are required.
    _Initiative, teaming, planning, project management and communication skills are required.
    _Ability to innovate and strategize, as well as work with details to drive projects to successful completion and implementation.
    _CAD, CATIA, or Solid Works, MS Office, 3D printing are required—Must state the level or experience and training in each of these skills.
    _Assignment may require occasional domestic travel of approximately 5% from Boeing to Suppliers facilities.
    __Assignment requires ability to work overtime and/or different shifts when needed.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: MP&Ppa
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 12/02/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Processes Engineer / MP&P IV (PA)

    Description:
    Defines requirements for materials, parts and processes used in the manufacture of products. Ability to lead production of specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Ability to lead development and qualification of new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts complex analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Ability to lead, design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under minimal supervision.

    SPECIFIC ASSIGNMENT QUALIFICATIONS…
    Assignment will support the Chinook program. Must have experience in applied knowledge of metallic materials in order to develop, select, or recommend materials that meet the environmental, regulatory, and design requirements of Rotorcraft products. Must be able to interpret material and process specifications in order to provide clarification and ensure specification intent is met. Must be able to review and or approve new and revised engineering documents/drawings by analyzing proposed changes in order to assess the impact on aircraft products and assemblies. (e.g., material specifications, process specifications, part standards, support specifications, manufacturing planning, industry/military standards) Apply engineering knowledge in order to write engineering specifications and develop projects to resolve problems and improve manufacturing processes (e.g., time, cost, etc.). Ensures application of best practices and identifies the need for enhanced processes, methods, and tools. Provide technical design support to program integrated product teams. Provide production shop support to disposition non-conformances and support program production needs. Provide technical support to suppliers as directed by program. Communicate with customers, teaming partners, subcontractors, and suppliers to exchange technical data. Must possess strong technical background in metallic aerospace materials and processes. Background should include knowledge of ferrous metallurgy, steel making processes, corrosion principles, Non-Destructive Evaluation Processes. Must be able to write technical papers summarizing results of investigations. Must be able to effectively communicate and be proficient with Information Technology tools.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    We also offer full medical, dental, vision, and 401k, including a bonus plan.

    We can also give you the per diem split if you qualify.
     
    Job Number: MP&Ppa
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: ASAP
    Input Date: 11/29/2016
    Last Updated: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Process Engineer

    Description:
    Materials and Process Engineer - Technical Specialist II


    Location: Savannah, GA
    Rate: $55.00 - $63.00/HR
    Long Term contract
    4x10


    Unique Skills:
    - Lead engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development.
    - Majority of the engineering projects and critical problems involve polymer matrix composites technology.
    - Bachelor's degree in engineering or related field. Thirteen (13) years in polymer matrix composites.
    - Experience generating FAA approved material test plans, equivalency test plans and reports required.
    - Experience generating material and process specifications, performing statistical analysis of material qualification data and material allowable, test plans, and reports required.
    - Experience performing root cause analysis and documenting results and recommendations.
    - Experience with Project Management earned value system.
    - Demonstrates a productive working relationship with material suppliers.
    - Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology.
    - Reviews and approves multi-discipline Smarteam workflows from an M&P perspective.
    - Knowledge of Smarteam and Catia V5 required.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6676
    Job Location: Savannah, GA
    Rate: $55.00 - $63.00/HR
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Last Updated: 02/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials and Process Engineer - Technical Specialist II

    Description:
    UNIQUE SKILLS
    Lead engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development. Majority of the engineering projects and critical problems involve polymer matrix composites technology. Bachelor's degree in engineering or related field. Thirteen (13) years in polymer matrix composites. Experience generating FAA approved material test plans, equivalency test plans and reports required. Experience generating material and process specifications, performing statistical analysis of material qualification data and material allowables, test plans, and reports required. Experience performing root cause analysis and documenting results and recommendations. Experience with Project Management earned value system. Demonstrates a productive working relationship with material suppliers. Supports continuous improvement of products and processes by designing, developing, fabricating, testing, evaluating and implementing new concepts and technology. Reviews and approves multi-discipline Smarteam workflows from an M&P perspective. Knowledge of Smarteam and Catia V5 required.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-639-82721
    Job Location: Southeast
    Rate: $55.00 to $63.00/Per Hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 01/31/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials, Process, and Physics Enigneer (Metals)

    Description:
    Defines requirements for materials, parts and processes used in the manufacture of products. Ability to lead production of specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Ability to lead development and qualification of new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts complex analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Ability to lead, design, development and qualification of sophisticated computer and production systems to satisfy user requirements. Works under minimal supervision.

    SPECIFIC ASSIGNMENT QUALIFICATIONS…
    Assignment will support the Chinook program. Must have experience in applied knowledge of metallic materials in order to develop, select, or recommend materials that meet the environmental, regulatory, and design requirements of Rotorcraft products. Must be able to interpret material and process specifications in order to provide clarification and ensure specification intent is met. Must be able to review and or approve new and revised engineering documents/drawings by analyzing proposed changes in order to assess the impact on aircraft products and assemblies. (e.g., material specifications, process specifications, part standards, support specifications, manufacturing planning, industry/military standards) Apply engineering knowledge in order to write engineering specifications and develop projects to resolve problems and improve manufacturing processes (e.g., time, cost, etc.). Ensures application of best practices and identifies the need for enhanced processes, methods, and tools. Provide technical design support to program integrated product teams. Provide production shop support to disposition non-conformances and support program production needs. Provide technical support to suppliers as directed by program. Communicate with customers, teaming partners, subcontractors, and suppliers to exchange technical data. Must possess strong technical background in metallic aerospace materials and processes. Background should include knowledge of ferrous metallurgy, steel making processes, corrosion principles, Non-Destructive Evaluation Processes. Must be able to write technical papers summarizing results of investigations. Must be able to effectively communicate and be proficient with Information Technology tools.

    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Must be US Person for purposes of Export Compliance.
     
    Job Number: 36504
    Job Location: PA
    Rate: open
    Per Diem: split
    Overtime: possible
    Duration: 6+ months
    Start Date: asap
    Input Date: 01/12/2017
    Last Updated: 02/07/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Erica Price
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer / UG/NX CA

    Description:
    Job Title: Mechanical Design Engineer
    Job Number: 157711/4393
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract


    Description:

    Mechanical Design Engineer
    This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.
    Essential job functions: • Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
    • Contribute to the development of new product requirements through consulting with customers and sales personnel
    • Validate conceptual problem solutions through trade studies and by applying sound engineering principles
    • Perform engineering calculations related to sizing, performance, tolerance and assembly
    • Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
    • Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
    • Support programs with some travel (5-10%) and the participation in presentations to customers
    • Represent Moog in a manner consistent with its leading-edge technical reputation
    • Create reliable designs through a comprehensive experimental development test program
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 6+ years of design and development engineering experience
    • Proficient in current versions of NX/UG computer-aided design software
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
    • Team-oriented, with the desire to participate in and contribute to a high functioning team
    Scope:
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering
     
    Job Number: MB-4393
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 02/06/2017
    Last Updated: 03/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer

    Description:
    Mechanical design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes