Job Search Results

365 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/01/24 Friday 12:53PM Pacific Time by ContractJobHunter. )

Listings 1 - 365

Go To My Job Tracker

Expand all descriptions

2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 01/22/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/31/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2584 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) ENGINEER - cv, word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Support Production; respond to RNC.

Provide technical assistance to engineering staff and contribute to completion of project milestones.

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Requirements

Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Design.

Have a minimum of 15 years of relevant aerospace experience.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Are capable of interfacing with wiring diagrams, system, and EMI/EMC requirements.

Have an intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements.

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Have knowledge of Catia V5.

Have an Avionic and or EWIS MRB approval knowledge and understanding, an asset.

English - French working knowledge an asset.
 
Job Number: 2584
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 10/31/2019
Last Updated: 12/20/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 01/22/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2588 - PNEUMATICS - MECHANICAL SYSTEMS SPECIALIST - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (8) years.

Possess very good knowledge in Pneumatic and Mechanical Control Systems and their integration on the aircraft.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces integration, testing and installation.

Have a background in design, integration, development and certification of Mechanical Systems.

Previous experience in providing engineering support to a Final Line/Production would be an asset.

You have a background in design, integration, development and certification of Propulsion Systems.

Must have good knowledge of DO-160, FAR/CAR25 Regulations.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

FUNCTION

Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Pneumatic/Mechanical Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2588
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 12/06/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2590 - PROJECT ENGINEER - CV in 'word doc - only'

Description:
Have minimum of 10 years%u2019 experience in project management in the aerospace, transportation or other field where you have taken on increasing level of responsibilities and demonstrate the ability to handle more complex projects.

Training or Bachelor's degree in Project Management, Engineering, or relevant experience in the aeronautical / transportation fields.

Have an extensive management and supervisory experience that will differentiate you from other candidates and make you a prime candidate for this position.

Have a Project Management Professional (PMP) Certification from the Project Management Institute (PMI).
Exceptional relational and editorial skills in English and French.

Are familiar with Microsoft Office software such as PowerPoint, Excel and MS Project.

FUNCTION

Have experience in leading and driving engineering and fabrication activities for internal resources as well as third party Engineering service suppliers.

Leadership, ability to have a strategic perspective with a global vision.

Strong organizational, interpersonal, time management and communication skills.

Be autonomous and a critical thinker in order to take the right decisions.

Be confident and have experience in multidisciplinary team coordination.

Ability to assign tasks effectively and then follow up with thoroughness and rigor.

Be a team motivator, collaborator and promote the valorization and respect of others.

Have resilience, openness to change and manage stress positively.

Have good cost and contract management skills.
 
Job Number: 2590
Job Location: Canada
Rate: 56 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/28/2019
Last Updated: 01/22/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

4 Aircraft Stress Engineers with Composites

Description:
4 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 01/23/2020
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

A&P Helicopter Mechanic

Description:
Chipton-Ross is seeking 6 A&P Helicopter Mechanics for openings in Eglin AFB, FL.

RESPONSIBILITIES:
The A&P Helicopter Mechanic will function as a hangar/line maintenance mechanic and be responsible for performing helicopter inspection maintenance in accordance with operating manuals, polices, and procedures. The desired candidate will be experienced enough to work not only alone in a productive, self-driven way, but also act as part of a team with one or two other team members to help each other develop and perfect their maintenance servicing skills. The needed General Mechanics will have the necessary knowledge and experience to perform aircraft daily, hourly, periodical hangar / line scheduled aircraft maintenance / inspections along with the aptitude and expertise to perform, troubleshoot and repair unscheduled aircraft maintenance issues as needed / directed. They will configure aerospace vehicles and bench test equipment. Troubleshoot complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Selected candidates will perform validation/verification testing of systems and components. Document procedures and establish processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspect components and verify repairs for flight worthiness requirements. Oversee training and work under general direction. The desired candidate will also be experienced at towing, securing, performing operational, pre- / thru- / post- flight checks as well as fueling/defueling aircraft. Each candidate should be able to:
Communicate with on-site manager, A&P IA supervisors, and co-workers in a timely, effective way
Work on own as well function as part of a team
Assure inspections, maintenance and repairs are done in accordance with procedures described in the companys FAA Repair Station Manuals as well as with FAA Regulations and manufacturer instructions
Understand and work within restrictions of Air Force AFI 21-101 and DCMA 8210.1C
Use sound judgment and technical aptitude to make good decisions regarding job sequence and techniques, troubleshooting and discrepancy resolution to maximize safety, quality and efficiency and adhere to agreed-upon deadlines
Operate with the highest level of ethics, integrity, safety, quality and honesty
Lift equipment and materials weighing up to 35 pounds.
Climb ladders, work from heights, apply finger and hand dexterity in using hand tools, be able to move around the shop/hangar area and within aircraft continuously throughout the workday
Have computer usage expertise, including MSFT Office, for digital inventory, tool checkout, inspection / maintenance data entry, etc.

REQUIRED EXPERIENCE:
Current FAA Airframe and Powerplant (A&P) Certification is REQUIRED
4+ years of helicopter / rotor wing maintenance experience inspecting, overhauling, and maintaining turbine engine helicopters required
Be flexible, dependable, and work assigned shifts
Be the upmost Safety, Quality, Tool and FOD control conscious

PREFERRED EXPERIENCE:
2+ years recent experience on AW-139 preferred
AW-139 Experience preferred.
Experience as an FAA Part 145 Repair Station A&P mechanic is desired.

EDUCATION:
Accredited High School Diploma or GED required; Two-year degree in aviation discipline desired.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM

ADDITIONAL REQUIREMENTS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 182455
Job Location: Eglin AFB, FL
Rate: $DOE
Duration: 6 Months
Input Date: 12/02/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Christopher Conaway
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Allentown, Pennsylvania.

Duties & Responsibilities:
Technicians working on aircraft, components or related parts of aircraft are responsible to perform work outlined on applicable work forms in accordance with airlines policies and procedures, manufacturer’s manuals and FAA requirements.
Overhaul, maintenance, and repair of airframe components, power plants, aircraft communication, navigation equipment, and associated components in accordance with airlines manuals, manufacturer’s manuals, bulletins, and orders.
Ensure that the appropriate tag is attached to all parts removed from an aircraft in accordance with Airlines policy.
The Technician, in performing his or her duties is required to be constantly alert for defective, worn or failed parts as well as safe working conditions.
Proper execution of an Airworthiness Release.
Responsible to sign for the accomplishment of work on applicable work forms and records.
A Technician, when qualified, may be required to perform the duties of Inspector in accordance with the Inspector job classification as described in the manual.
Responsible to keep the work area in a clean, safe and orderly manner.
Will be assigned to such housekeeping duties as policing his or her work and/or repair area as well as maintenance of company property.
Process all necessary paperwork as mandated by regulation.
Qualifications:
FAA certified Airframe and Powerplant (A&P) who perform direct maintenance in accordance with Airlines Continuous Aircraft Maintenance Program (CAMP).
Airbus GEN FAM’s “Highly preferred”
Must be authorized to work in the US as defined by the Immigration Act of 1986.
Must pass a Criminal Background Check.
High School Diploma/GEDValid Airframe & Powerplant Certification (A&P)
Minimum two (2) years of experience in aircraft maintenance for Part 121 environments.
Must have a valid Driver’s License and clean driving record.
Sponsorship is not available for this role.
Effective Communication skills, both verbal and written.
Proficiency with Microsoft Office Word and Outlook email.
Airbus experience and Airbus GEN FAMs.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49796
Job Location: Allentown, PA
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanic in Fort Worth, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s,
FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48131 / 44189
Job Location: Fort Worth, TX
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Bridgewater, Virginia!

Qualifications:
HS diploma or GED equivalent required; Computer Science or Scientific Technology discipline degree preferred
3 years’ of experience with machine or sheet metal practices, with 1 year of fabrication & instillation of parts required
4 years’ total experience in aviation maintenance experience plus civilian or military aviation technical school preferred, but not required
Must have A&P License
Three years’ experience minimum either within MRO, airlines, or line maintenance environment
Must have commercial aircraft experience (717, 737-400 through 737 – 900, 757, 767, DC9)
Dash8 experience preferred, but not required
ATR 72 or SAAB 349 experience preferred, but not required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49697
Job Location: Bridgewater, VA
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Houston, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s, FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
Must have a minimum of 2 years CRJ 200/700/900 experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44337
Job Location: Houston, TX
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Minneapolis, Minnesota!

Job Description:
Inspect, test, repair, maintain, and service aircraft.
Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications
Perform visual inspections during assembly of part and after repair or installation of component.
Perform operational checks after maintenance is performed to ensure proper operation.
Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks
Disassemble and inspect parts for wear, warping, or other defects
Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment
Test engine and system operations, using testing equipment
Service and maintain aircraft systems.
Perform maintenance IAW FAA approved technical data
Research FAA technical data to locate applicable data relevant to assigned tasks
Other duties may be assigned
A&P Mechanic Job Requirements:
FAA Airframe and Powerplant license
Must have 3-5 years experience within commercial aviation
Must be able to read and write English and be able to comprehend and apply information contained in technical manuals
Must be able to document maintenance performed on required forms
Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models
Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)
Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines.
Practice safety conscious behaviors in all operational processes and procedures
High School Diploma or equivalent
Successfully complete a fingerprint-based Criminal History Records check prior to beginning work
Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds
Must be willing to work rotating or fixed shifts
A valid clear driver’s license
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49021
Job Location: Minneapolis, MN
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant

Description:
Administrative Assistant
Job ID # 2019-10221
Contract Opportunity
Location: Orlando, FL
Industry: Aerospace & Defense
Minimum Education: Bachelor’s Degree
Minimum Experience: 0-3 years

What You’ll Do:
• Perform a variety of secretarial and administrative duties for assigned supervisor/manager or senior staff member.
• Perform normal office functions such as setting up and maintaining alphabetical, numerical and/or subject files; interviewing callers and making proper referrals; arranging meetings and conferences; and receiving, referring, or answering mail.
• Use personal computers and standard desktop software to compose reports, correspondence, and memorandums; review drafts and finished documents for appropriate grammatical usage; answer questions relating to office operations and established policies and procedures.
• May provide guidance and direction, as needed, to lower-level secretaries and other clerical employees.
• Experience with CONCUR and Outlook applications would be helpful.

What You’ll Need:
• This position supports a 9/80A -1st shift work schedule.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Bachelor’s Degree combined with 0-3 years of experience.

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10221
Job Location: Orlando, FL
Input Date: 11/22/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Administrative Assistant 3 CA

Description:
Administrative Assistant 3 (Job Number: 19035886)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Workweek: 9/80

Duration: 1 year

Location: Palmdale, CA

Rate: $29/hr.

# of positions: 1

Clearance: No clearance to start

Start Date: ASAP

Temporary Administrative Assistant is needed for functional homeroom support within the Vehicle Engineering Directorate in PAICoE-OKC, Aerospace Systems (AS). This individual will be a vital member of the team supporting a dynamic and challenging center. You will report directly to the VE Director. Responsibilities include supporting internal and external briefings & presentations, managing calendars and meetings schedules, making travel arrangements and preparing expense reports, answering phones, monitoring emails, preparing for and coordinating customer interface and customer visits, as well as, generating and maintaining internal file systems and records. Individual will be expected to handle sensitive personnel and technical information.

The successful candidate must be proactive, well-organized, and dependable and have the ability to work with minimal supervision. He/she must be a team player, possess effective communication and excellent interpersonal skills and be able to demonstrate mature leadership capabilities, team player and advocate for improving admin staff relationships. The position requires a high degree of professionalism, presence, flexibility, diplomacy, judgment, discretion and the ability to multitask and work independently and drive closure on every task with urgency. Must have the ability to filter high traffic correspondence and contacts, and coordinate high volume of travel (both domestic and on occasion international). Must be effective at coordination/hosting meetings as required, and be able to interface with all levels of management and customers. Be proactive in managing schedules including conflicts and changing travel requirements. Responsibilities will also include providing back-up support to four other department managers within VE and be the on call backup to the CoE VP Admin.


Basic Qualifications:

High School diploma required.
· 6 years min Administrative Assistant experience supporting senior level management.
· Expert with Concur travel and expense
· Ability to operate Skype meetings with ease
· Experience with Outlook, Word, Excel, PowerPoint


Preferred Qualifications:

· Associates Degree
· Experience with NGC corporate policies related to directorate personnel
 
Job Number: JK-1825ATO
Job Location: Palmdale, CA
Rate: 29/hr max
Duration: 12 months
Input Date: 11/18/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Simulations System Engineer

Description:
*This is a 6 month contract position located in Orlando*



We are hiring a contract an Aerospace System Engineer with particular skills in integrating simulation software into military vehicles. Besides the normal duties of system engineering (maintaining and creating timelines/milestones, cost and schedule creation, requirements development, decomposition, derivation and allocation, integration expertise, working with IPT/SEIT, integration teams, technical planning, system verification/validation), candidate will need to be well versed in simulation software integration specifically, with software such as WARSIM, JSAF, EPIC, P3D, Titan Vanguard.



A good amount of the work will involve simulation training and simulation domain including Joint, Live, Virtual & Constructive (JLVC) training systems architecture, simulation interoperability architecture such as Test and Training Enabling Architecture (TENA), and simulated terrain and entity model generation tools.



Required:
*5 years’ experience in Simulation System Engineering, integration, V&V, simulation training, etc.
*Basic requirements development (DOORS), verifying HW&SW, and V&V
*Support software implementation through requirement and model interpretation and maintenance
*Experience in Systems Engineering Integration Teams (SEIT); software implementations; Model Based System Engineering (MBSE) methodologies
*Specific simulation training experience with Joint, Live, Virtual & Constructive (JLVC) training systems architecture, Training Enabling Architecture (TENA), Collective training knowledge
*Experience leading a team.
*Able to travel internationally about 25% of the time and able to work 2nd shifts as needed.
*Able to apply and gain a Secret Clearance upon starting; US Citizens only please



Pluses:
*Simulation applications (two or more of the following) WARSIM, JSAF, EPIC, P3D, Titan Vanguard
* Real-time platform wargaming IEEE standards such as High-Level Architecture (HLA) and Distributed Interactive Simulation (DIS)
* Military tactical data link networks such as LINK11 and/or LINK16
* Simulation interoperability architecture such as Test and Training Enabling Architecture (TENA)
* Simulated terrain and entity model generation tools and processes
 
Job Number: 539
Job Location: Orlando, FL
Rate: $63.92
Per Diem: yes split
Input Date: 11/14/2019
Last Updated: 12/05/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Design Engineer - Interiors

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Aircraft Mechanic

Description:
Chipton-Ross is seeking a Product Repair/Mod Tech C for an opening in New Orleans, LA.

RESPONSIBILITIES:
This position is for an F-15 electrical and avionics subject matter expert. Applies advanced technical knowledge of F-15 systems to solve unusually complex problems that typically cannot be solved solely by referencing schematics, engineering data or similar documents. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.

EDUCATION:
Accredited high school diploma or GED and minimum 5 years experience (equivalent combination of required education and electrical experience in a modification environment).

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 4:30 PM

TRAVEL: YES
<10% ADDITIONAL REQUIREMENTS: This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates. MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 182869
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 Months
Input Date: 11/06/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Michael Olivarez
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: molivarez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Lake Charles, Louisiana.

Duties & Responsibilities:
Works as direct labor on aircraft and is safety sensitive position.
Must be capable, and have mastery of, all processes associated with prepping and painting aircraft.
Ensure company Environmental Health and Safety policies are upheld.
Perform all aircraft painting processes on aircraft.
Aircraft stripping mastery.
Aircraft sanding mastery.
Aircraft masking mastery.
Aircraft painting mastery
Aircraft detail and mx markings mastery
Aircraft layout and sign-boards mastery
Report to work on time on scheduled shifts to work
Maintain 5S principles of Sorting, Systematic Arrangement, Shining, Standardizing and Sustaining with heavy emphasis on housekeeping of the aircraft maintenance bays, consumable point of use tables, tool room and paint mix areas
Qualifications:
Minimum of 2 years’ experience as an Apprentice Painter.
Candidates with 5 years+ commercial painting experience are considered master level painters.
Must be expert level boom lift and scissor lift operator.
Ability to travel as required.
Ability to read and write English.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49819
Job Location: Lake Charles, LA
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Kennesaw, Georgia.

Duties & Responsibilities:
Responsible for the finished Quality of parts and a limited number of frames.
Applies coats of paint to protect interior or exterior surfaces, of tractors and belt-loaders.
Selects premixed paints or mixes required portions of pigment, oil, thinning and drying substances to prepare paint that matches specified colors.
Paints surfaces and maintains spray equipment, spray gun and conventional spray gun and HVLP equipment.
Must have specific knowledge of paints (urethane and wash primers), thinners, spray guns, vic systems.
Knowledge of proper cleaning and rebuilding of guns, proper air pressures for product uses, understanding of work orders.
Occasionally required to operate air powered hand tools and common mechanics hand tools to perform some assembly operation essential functions.
Qualifications:
High School diploma or GED required 2 years related experience preferred
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48481
Job Location: Kennesaw, GA
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Sheet Metal Technician-Several Shifts

Description:
Position Purpose:
The Sheet metal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

Principle Duties and Responsibilities:
1. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheet metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
2. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards.
3. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks.
4. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.
5. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information.
6. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications.
7. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP).
8. Conduct monthly 5S audits, as required.
9. Use the material tracking system to create parts demand, track squawks and to sign-off work.
10. Assist in developing initiatives to meet individual OGSM requirements, as required.
 
Education and Experience Requirements:
High School Diploma or GED required. Four (4) years of sheet metal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required.
Other Requirements:
1. Advanced knowledge of sheet metal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling).
2. Ability to read and interpret blueprints and engineering documentation.
3. Valid drivers license required. to operate towing and other transportation equipment.
4. Ability to read, write, speak, and understand proficiently the English language.
 5. Demonstrates excellent communication skills, both verbal and written.
6. Adapts to sudden schedule changes.
7. Able to use tools and equipment associated with sheet metal work.
8. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
9. Must have a good working knowledge of computers and experience working with MicroSoft Office suite.
10. Must be able to read, write, speak, and understand the English language.

2-1st shift positions
1-2nd shift position
1-weekend shift position
 
Job Number: 1910103713
Job Location: Appleton, WI
Duration: 12 months
Input Date: 07/01/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQqOQAW&URLSource=cjhunter

Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/30/2019
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: ChrisSheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
166618 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2423-1
Max Pay Rate: $22.00/hr
Start Date: 10/30/2019
End Date: 11/1/2020

Job Summary:
Builds complex sub-assemblies using a variety of tools including crimpers, lugging devices, torque devices and other complex and basic hand tools. Builds complex structural assemblies using blueprints and processes.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Fabricates complex wire harnesses with a variety of complex connecting devices. Reads and interprets complex wire diagrams, blueprints, drawings and work instructions. Solders complex components in sub-assemblies using a variety of techniques including j-hooks, turrets, etc.

Qualifications and Education Requirements
Technical, vocational and/or related military technical degree in electronics or related discipline.
Mandatory 10 + years of experience in aerospace and/or DOD manufacturing or modification involving the installation or modification of electronical components and electrical systems.
Thorough understanding of electrical theory and excellent understanding of electrical schematics and drawing.
Previous experience working in an ESD environment.
Ability to work with little to no supervision.
Very strong solder skills are a requirement.
Good written and communication skills.
Computer skills must be intermediate to advanced.

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years


Qty 3 positions
 
Job Number: LMRMS-2423-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/01/2019
Last Updated: 12/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.


Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)



Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software
 
Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/19/2019
Last Updated: 12/27/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics Engineer

Description:
Chipton-Ross is seeking an Avionics Engineer for an opportunity in Fort Worth, TX

RESPONSIBILITIES:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

REQUIRED EXPERIENCE:
Experience working electro-optic (EO) systems.

Desired skills
Active F-22 Project Clearance desired.
The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

EDUCATION:
Accredited Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


WORK HOURS:
Full-Time, 9/80-A

 
Job Number: 182271
Job Location: Fort Worth, TX
Rate: $DOE
Duration: 15 MONTHS
Input Date: 10/11/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians

Description:
STS Technical Services is hiring Avionics Technicians in Florence, South Carolina!

Qualifications:
Must have 5 years exp with Corp G/A
Beech 1900’s preferred for experience but not mandatory
5+ years Aviation Maintenance overall
A&P license required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48638
Job Location: Florence, SC
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Build Reliability Engineer

Description:
Chipton-Ross is seeking a Build Reliability Engineer for an opening in Hawthorne, CA with SpaceX to work on an exciting, new program.

DIRECT

POSITION OVERVIEW:
The Build Reliability organization at SpaceX is an inter-disciplinary team that ensures the reliability of flight components and production assemblies. Your breadth of exposure as a Build Reliability Engineer will be immense as you partner with every other core group at SpaceX, guiding the hardware from cradle to grave. You use data-driven decision making to actively represent quality objectives in design and development teams and to drive improvements in reliability on the manufacturing floor. You have the ability to dive deep on the details to identify and solve difficult technical problems, but you can also utilize a system level approach to prioritize issues for the vehicle as a whole. You thrive in a hands-on environment and will spend time in the office, on the factory floor, and in the lab to execute on the mission to bring the capability of flying astronauts back to the United States.

RESPONSIBILITIES:
Partner with Vehicle Engineering and Production teams during all development phases to analyze and create reliability plans for vehicle programs including identification of key characteristics, prototype testing for manufacturability, first article and detailed inspection planning, evaluation of previous non-conformance and lessons learned, and other manufacturing and quality tools as required
Lead the development of test plans and processes and partner with inspectors to ensure quality goals are met in a timely manner
Lead first build reviews to ensure transparency of design intent, design requirements, design and manufacturing risks, and manufacturability of design
Lead, facilitate, and participate in root cause investigations in their respective work centers
Lead containment of all suspect product including but not limited to providing guidance to quality inspectors, technicians, and shop supervisors to assist in quarantining of all suspect product
Design and develop inspection plans as required for process or design changes, ensure inspection/test criteria are objective with clear pass/fail criteria, and assess new processes for safety and product risks

REQUIRED EXPERIENCE:
2+ years of experience in a quality, manufacturing, or design engineering role (student project team or internship experience is also applicable)
Ability to work extended hours, weekends, and offsite as needed. Some travel may be required.

PREFERRED EXPERIENCE:
Experience supporting production of complex electro-mechanical, mechanical, or composites systems in high volume work centers and/or during production ramp-up
Knowledge of quality tools such as Lean principles, Six Sigma, root cause analysis and corrective action, advanced product quality planning (APQP), metrology, process failure mode and effects analysis (PFMEA), control plans, and various problem solving approaches
Dedicated to adopting a Lean approach to quality without compromising safety or reliability

EDUCATION:
Accredited Bachelor's degree in aerospace engineering, manufacturing engineering, materials engineering, mechanical engineering, electrical engineering, or engineering physics

WORK HOURS:
Ability to work extended hours, weekends, and offsite as needed.
Full-Time

 
Job Number: 183181
Job Location: Hawthorne, CA
Rate: $DOE
Duration: Direct
Input Date: 11/20/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Business Manager - Engineering Services

Description:
Job Title:      Business Manager Engineering Services
Location:      Seattle, WA
Salary:           Base + Commission
Job Type:      Full Time w/ benefits
 
  

PDS Tech, a leader of high-value contingent staffing and SOW solutions has recently joined the AKKA Technologies Group.

AKKA Technologies is a global leader operating in Engineering and Technology Consulting. With more than 21,000 experts, we are at the forefront of the digital and connected world accelerating innovation and time to market for the world’s largest industrial groups. We support our clients throughout the life cycle of their products. We provide them with expertise that encompasses the entire technological product environment and support them in bringing their product to market.

Today, its North American branch is looking for a Business Manager (2-5 years of exp) who would like to join a dynamic and growing company in Seattle, to support its business development in the Aerospace sector. The position is to be filled in Seattle, as soon as possible.
 
Description/Tasks
Within the Puget Sound region, the candidate will be focus on bringing high added value Engineering Service solutions to Aerospace customers in the fields of Mechanical Engineering, HW/SW development, Systems Engineering, Electrical Engineering, Tests, Manufacturing Engineering, Airworthiness, Customer Support, Aircraft Modification, and Digital Transformation.
The candidate should have capacity to:

  • Identify, develop and close new sales opportunities with Aerospace actors (OEM, MRO, Airlines…)
  • Develop customer relationships
  • Steering call for tender, financial proposal, team selection.
  • Management of resources working on projects
  • Steering project and deliveries.
  • Being target and results oriented
  • Start date:  ASAP.

Qualification/Experience
  • At least 2 years’ experience in aeronautics, in Engineering or Sales.
  • Minimum of Engineering Bachelor’s degree or similar from an accredited university.
  • Excellent presentation and communication skills are required.
  • Dynamic, hard-worker and passionate for technologies
  • Availability for business trip/travel in different states.
  • Home base: Seattle area.


More information on AKKA Technologies Group can be found on www.akka-technologies.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.




 
 
 
Job Number: 1910106765
Job Location: Renton, WA
Duration: 12 months
Input Date: 09/24/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stacy Smith
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJkRQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer / Process Engineer

Description:
Create the process and methodology of producing aerospace parts by CNC milling, create NC code for automated 5-axis milling operations, design all fixturing and tools necessary, document and continuously improve process

Qualifications & Responsibilities:
• Determine process and methodology in which the part will be produced
• Design fixturing, including modeling and making drawings of necessary components
• Proper cutting tool selection and understanding of feeds and speeds optimization
• Write NC code for 5-axis CNC machines using NX software and customer supplied solid models or prints (and model creation when none is supplied)
• Confirms process validity by utilizing Vericut simulation software (previous experience not mandatory, but preferred)
• CNC machine set-up, trial running, debugging and optimization of programs
• Creates in-process prints/set-up sheets for shop use with proper dimensioning and tolerancing
• Competent understanding of GD&T and tolerance stack-ups
• Interpreting of customer supplied prints to ensure correct intent
• Document and continuously improve process
• Optimize production planning to meet scheduling demands
 
Job Number: 123123123
Job Location: New Britain, CT
Rate: Very Competitive
Per Diem: Permanent Position
Duration: Permanent Full Time position
Start Date: ASAP
Input Date: 11/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 01/08/2020
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 12/09/2019
Last Updated: 01/20/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Cost Estimator

Description:

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

Job Summary


This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

Job Responsibilities 

  • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
  • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
  • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
  • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


  • Prepare analysis and verification of product costs in support of special projects from the engineering group
  • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Qualifications:
  • Must have an Active DoD Secret Clearance
  • Excellent computer skills (EXCEL, PowerPoint, & Word).
  • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
  • 2 years of experience in estimating techniques or labor time standard development
  • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

Preferred Qualifications 

  • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
  • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
  • Understanding of contractual agreements (FAR, TINA).
  • Strong analytical and planning skills
  • Excellent computer skills (MS Office Suite).
  • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
  • Excellent written and verbal communication and collaboration skills

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
 
Job Number: 1910105335
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 08/09/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer - Drafting Technician

Description:
Designer - Drafting Technician

Job ID # 2019-10284

Direct Hire Opportunity

Location: Marion, VA

Industry: Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 7 years

 

What You’ll Do:

Work in a cross functional team environment to design products to meet our customer requirements.
Create Catia CAD 3D models, 3D MBD associated data, and / or 2D drawing package.
Create Catia 3D composite models specifying all plies and creating subsequent 2D flat patterns for nesting.
Create 3D PDF files from the Catia 3D model.
Preform Tolerance stack analysis.
Work with Tool Engineers to design and create 3D models/2D drawings of tooling components required to build product. Experience in both metal and composite tooling.
Support build processes on our shop floor.
Assist in trouble shooting issues that arise in a production environment.
Attend and present at technical design review meetings both internal, and with customer participation.
 

What You’ll Need:

Department of Defense Secret Security Clearance is preferred at time of hire, but not required. Must be able to obtain a Secret Clearance within a reasonable amount of time from date of hire.
Proficiency in the use of Catia V5 CAD System.
(3D solid modeling, 3D MBD, 2D drafting, assembly design, composite design).
Proficiency in ANSI Y-14.4 dimensioning and Geometric Dimensioning and Tolerance (GD&T).
Experience working in the aerospace composites industry.
Experience working in a cross-functional team throughout the design life-cycle.
Ability to balance multiple priorities / tasks within given time constraints.
Experience in aerospace tool design would be considered to be a benefit.
Experience in working with a PDM system would be considered a benefit.
Exhibits a good company image, work ethic, and professional conduct.
Fluent in Microsoft Office tool suite.
Experience in preforming tolerance stack analysis
Experience working with PDM systems
*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Bachelor's Degree in a related specialized area or field or equivalent experience is required.
7 Years of experience in design/drafting
Strong mechanical background.
  

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10284
Job Location: Marion, MA
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 10/28/2019
Last Updated: 01/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer

Job ID # 2019-10291

Contract Opportunity

Location: Oklahoma City, OK

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Associate’s Degree

Minimum Experience: 5 years

 

What You’ll Do:

Wire Harness Installation Design is a unique opportunity to use both electrical and mechanical skills. This position also allows the possibility to see released engineering be installed while supporting the build during shipside support.
During the design phase:
Analyze functional schematics and wire diagrams to understand system design.
Develop and maintain cable/wire harness detail and assembly designs.
Perform design reviews to validate spatial integration and requirements verification.
Develop and maintain electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry).
During the build phase:
Provide engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
Works under general direction.
Support the development, maintains and releases electrical/mechanical drawings, systems design or engineering documentation and data by applying company, industry and governmental standards.
Use design tools prepares documentation and incorporates design changes.
Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Support engineering system design and functionality validation activities.
Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
Coordinate activities and products with internal partners and external suppliers.
Works under general direction.
 

What You’ll Need:

Ability to obtain a Secret Security Clearance is required, an active Secret Clearance is preferred.
Defense Experience preferred but not required.
Some travel may be required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

5+ years of designing or supporting electrical wire harness Installations.
Education/experience typically acquired through advanced education (e.g. Associate) and typically 5+ years of related work experience or an equivalent combination of education and experience.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10291
Job Location: Oklahoma City, Okalahoma
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer

Description:
EE Technical Designer

Job ID # 2019-10288

Contract Opportunity

Location: Oklahoma City, OK

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain - Secret

Minimum Education: Associate’s Degree

Minimum Experience: 3 years

 

What You’ll Do:

Wire Harness Design Support is a unique opportunity to use electrical skills. This position also allows the possibility to see released engineering be installed while supporting the build during shipside support.
During the design phase include:
Analyze functional schematics and wire diagrams to understand system design.
Develop and maintain cable/wire harness detail and assembly designs.
Perform design reviews to validate spatial integration and requirements verification.
Develop and maintain electrical product details, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry).
During the build phase:
Provide engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests).
Work under general direction.
Support the development, maintains and releases electrical/mechanical drawings, systems design or engineering documentation and data by applying company, industry and governmental standards.
Using design tools, prepare documentation and incorporates design changes.
Create, develop and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
Support engineering system design and functionality validation activities.
Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
Coordinate activities and products with internal partners and external suppliers.
Works under general direction.
 

What You’ll Need:

Ability to obtain a Secret Security Clearance is required at time of hire, an active Secret Security Clearance is preferred.
Some travel may be required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Education/experience typically acquired through advanced education (e.g. Associate) and typically 3+ years of related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 year of related work experience, 5 years of related work experience, etc.).
Bachelor’s Degree preferred but not required.
5+ years of designing or supporting electrical wire harness Design and Installations


What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10288
Job Location: Oklahoma City, OK
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

ERP Analyst

Description:
PDS Tech, Inc. is seeking a ERP Analyst in Hazelwood, MO. 

Job Purpose


Maintain synchronization of the supply chain between various organizations, customers, and suppliers by managing product requirements, inventory systems, and production flow of work in process. Lead work in flow management by coordinating all day to day activities and communicating what needs to be done to operations and ensure all material is available prior to shop floor expected execution. 

Principal Accountabilities



  • Develop and implement strategy to communicate daily work schedule created by the Schedule/Planner to operations.  Ensure the appropriate schedule information to ensure the schedule is achievable.
  • Execution of the manufacturing work orders, tracking and reporting to ensure compliance to the daily schedules. Identify issues that prevent the successful execution of the daily schedules.
  • Provides the shop floor with work cell schedules based on the master production schedule.
  • Conduct Pre-Ops Readiness Reviews to ensure availability of required tooling, materials, planning, work instructions, and capacity to execute the daily schedules.
  • Expedite flow of materials, parts, and assemblies within or between departments in accordance with production schedules.
  • Maintains manufacturing LOB status, commitments and schedules.
  • Performs ERP and related business system transactions as required to support operations, supply chain and inventory management and business system compliance.
  • Releases, prints and delivers work orders to the start of the manufacturing process.
  • Performs cycle counts and make adjustments as necessary to inventory to ensure appropriate inventory reporting.
  • Manages WIP to ensure it continues to move through the production flow and raises issues that prevent the adequate flow of material to meet the production schedule.
  • Perform all duties in compliance with company policies and procedures.

Please email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss 




 

Education


BS/BA in Supply Chain/Business Administration or other relevant discipline preferred, and/or a combination of education and relevant experience in lieu of a degree. Recognized material management certification such as APICS preferred.

Required Qualifications & Experience



  • Requires 3 years of experience in Supply Chain Management or Manufacturing/Enterprise Resource Planning.
  • Proficient knowledge of Microsoft Office Software, including Word, Excel, Access, and Outlook.
  • Proven/demonstrated knowledge of Lean Manufacturing principles and working with Standard Work Instructions.


Additional Desired Qualifications & Experience



  • Previous experience working in a manufacturing environment and scheduling organization preferred.
  • Previous experience and working knowledge of ERP, MRP and other manufacturing systems preferred.
  • Ability to communicate clearly and professionally both orally and in writing.
  • Understanding and working knowledge of a manufacturing environment.
  • Excellent interpersonal skills.
  • High level of accuracy in reporting.
  • Self motivated with an ability to multitask with many diverse assignments.
  • Self directed to perform work with minimal supervisory oversight.


 PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 


 
Job Number: 1910105596
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 3 months
Input Date: 08/13/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Jessalyn McKeown
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GX87QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer

Description:
Electrical Design and Analysis Engineer
Job ID # 2019-10255
Contract Opportunity
Location: Oklahoma City, Ok
Industry: Aerospace & Defense
Clearance Requirement: Ability to Obtain – Top Secret
Minimum Education: Bachelor’s Degree
Minimum Experience: 2 years

What You’ll Do:
• Experienced Electrical Circuit Design Engineer.
• Maintain detailed requirements and specifications for various electronic products.
• Develop detailed designs of limited scope.
• Conduct various methods of testing and analysis to support design.
• Gather data for technical performance measures and performs basic analysis.
• Provide basic engineering support throughout the lifecycle of the product.
• Conduct trade studies and literature research to support future product designs.
• Work under general supervision.
• Mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
• Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (B-52, B-1B, B-2, AEW&C, AWACS, and others) and diverse projects.
• Assignments will provide an excellent opportunity to learn aircraft circuit design on the various platforms.
• Assignments may deal with
• Reviewing supplier and partner qualification data.
• Circuit Analysis/Layout/Design/Manufacturing.
• FPGA design/development/integration.
• Perform Trade Studies/Modeling.
• Cross-functional coordination and integration.
• Develop Design Requirements and Plans.
• Provide Engineering Support to Supplier Management Procurement Activities.
• Perform Engineering Investigations and Troubleshooting Efforts.
• Develop and perform Acceptance Test Procedures.
• Test Automation for aircraft modifications.
• Other job responsibilities may include
• Analyze customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
• Develop high-level and detailed designs consistent with requirements and specifications.
• Validate designs through various methods of review, testing and analysis.
• Identify, track and status technical performance measures to measure progress and ensure compliance with requirements.
• Support Supplier Management with make/buy recommendations and other technical services of limited scope.
• Provide engineering support throughout the lifecycle of the product.
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.

What You’ll Need:
• This position requires the ability to obtain a Top Secret Security Clearance at the time of hire.
• Must be willing and able to travel up to 25% of the time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Bachelor's Degree and typically 2+ years of experience in an engineering classification or a Master's degree with experience in an engineering classification.
• Required: Bachelor or Master Degree from an accredited course of study, in engineering, com

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10255
Job Location: Oklahoma City, Okalahoma
Input Date: 11/22/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 5

Description:
LOCATION Orlando, FL

DESCRIPTION General Summary
Looking for a Sr. Electrical Design Engineer specializing in analog and high-speed digital circuit design to join our Aerospace and Defense team responsible for designing and developing modern communications test systems and solutions. In addition to developing new designs and architectures, the candidate must have solid experience in all phases of new product development; from conception to production.
Principal Duties and Responsibilities
 Responsible for the total end-to-end process of capturing requirements, designing, developing, validating, testing, documenting, and transition to manufacturing of electrical and electronics systems and subsystems.
 Work as part of a cross-functional product development team to effectively plan and execute electrical PCB designs to meet critical project requirements and deadlines.
 Perform schematic capture and direct PCB layout.
 Define and document characterization and calibration methodologies, Validation and Verification (V&V) plans, and lead the V&V process for individual designs.
 Work with cross-functional teams across the United States to support new product development and sustainment activities.
 Mentor other engineers and participate in design review activities.
Job Specifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

POSITION REQUIREMENTS Qualifications
1. Experience and understanding in the application of principles, theories, concepts, practices, and standards relating to modern software-defined architectures and synthetic instrumentation designs.
2. Demonstrated expertise in PCB stackup definition and trade-off analysis, including physical geometry, material selection, crosstalk mitigation, return path management, and manufacturability.
3. Extensive experience with simulation tools, such as LTSpice and HyperLynx
4. Extensive experience and thorough understanding of modern high-speed bus interfaces, including but not limited to USB 3.x, DDRx, PCIe Gen 2/3, Gigabit Ethernet, JESD 204B, and FPGA SERDES interfaces.
5. Experience developing complex mixed-signal designs and architectures.
6. In-depth understanding of schematic capture, circuit design, design tools, circuit simulation, and circuit layout design, techniques, and verification methodologies.
7. Expertise in developing design documentation and test instructions/procedures.
8. Expertise in taking a product design from concept to production.
9. Expertise in design for manufacturability (DFM) and design for test (DFT).
10. Provide technical leadership in complying with regulatory agencies in order to meet safety and Electromagnetic Compatibility (EMC) requirements.
11. Strong analytical reasoning and problem solving skills with knowledge in performing root cause analysis and recommending corrective action to resolve test failures.
12. Ability to act as an engineering lead and subject matter expert for one or multiple concurrent projects involving cross-functional teams in multiple geographic locations.
13. Must be a US person.
Education/Experience:
1. Bachelor’s in Electrical/Electronics Engineering (BSEE) or related field is required, Master’s Degree (MSEE) is preferred.
2. 15+ years of experience in Electrical Design.
Computer Skills:
1. Experience with Altium Designer for schematic capture and layout.
2. Experience with simulation tools, such as LTSpice, HyperLynx, ADIsimCLK, etc.
3. Experience with software and firmware development languages, such as C, C++, C#, VHDL, MATLAB, and LabVIEW is a plus.
4. Proficient in Microsoft Office
 
Job Number: 1001
Job Location: Oralndo, FL
Rate: Hourly Rate
Per Diem: Yes
Overtime: Yes
Duration: 6-12monts
Start Date: Q1
Input Date: 11/21/2019
Firm Name: EXPLEO GROUP
Attention: Faith Wilson
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

Electrical Systems Design Engineer 5

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include
• Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Works with other to develop program test strategies.
• Manages performance of critical suppliers to ensure system integration and compliance with requirements.
• Conducts program independent reviews and reports results to program leadership.
• Provides critical support of fielded hardware and software over the entire product lifecycle.
• Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Works under consultative mentorship.

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 374254
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 01/24/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/11/2019
Last Updated: 12/13/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environmental Effects Engineer

Description:
Electromagnetic Environmental Effects Engineer

Location: Fort Worth, TX




The Electromagnetic Environmental Effects (E3) Engineer is responsible for developing, managing and communicating the E3 methodology to internal and external customers.


Position Responsibilities:

Applies engineering principles to investigate, analyze, plan, design, develop, implement, test, and evaluate air vehicle, weapons, and avionics with respect to E3 systems engineering.
Develops and communicates E3 approach and methodology to management.
Determines System level E3 targets and work with IPTs to develop IPT level targets.
Performs air vehicle and systems level analyses to verify performance.
Plans, supports, and leads E3 testing to meet qualification requirements.
Works closely with IPTs to review evolving design and provide E3 input into their decisions, providing E3 impacts to all Design Decision Notices.
Tracks, designs and develops E3 estimates based on preliminary and detail design layouts.
Suggests design improvements / spiral opportunities to improve E3 performance.


Education Requirements:

Bachelor's Degree in Engineering is required. Major in Electrical Engineering is preferred.
Major in Aerospace Engineering or Mechanical Engineering may be considered with sufficient experience.
Masters Degree is preferred.

Position Requirements:

At least 9 years of E3 experience on airborne platforms.
Expertise in aerospace design and verification processes to include requirements development and verification.
Skilled in preliminary and detailed design
Proficiency with MRP, Planning, Manufacturing is strongly preferred.
Must have the ability to communicate efficiently and effectively to coordinate E3 activities, prioritize tasks, and report status.
Must be able to build and maintain effective relationships with customers, internal
and external suppliers, as well as horizontal integrations across the other teams.
PC proficiency in Microsoft Word, Excel, PowerPoint, and Outlook is required.
Must have the ability to work effectively within a team.
Good interpersonal and organizational skills are required.


EEO Statement Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of, race, color, religion, gender, age, national origin, military status, veteran status, handicap, physical or mental disability, sexual orientation, gender identity, genetic information or any other characteristic protected by law.



This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR)., Non-U.S. persons selected must meet eligibility requirements for access to export-restricted information. , The ITAR/EAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58193
Job Location: Fort Worth, TX
Per Diem: Possible
Start Date: ASAP
Input Date: 11/19/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/24/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrophysics Engineer - Scientist

Description:
Electrophysics Engineer - Scientist
Job ID # 2019-10224
Contract Opportunity
Location: El Segundo, CA
Industry: Aerospace & Defense
Minimum Education: Bachelor’s Degree
Minimum Experience: 14 years

What You’ll Do:
• Design and development projects for state-of-the art MMIC/RFIC electronics for communication systems and space-based applications.
• Design responsibilities for high power, high efficiency MMIC power amplifiers.
• Activities and duties will include RF circuit design, requirements and interface definition, modeling and analysis, hands-on testing, performance and design verification.
• Solve anomalies that occur during integration and test, as well as support external sub-contractors in development of articles to be delivered to the Satellite Development Center.
• This position will report to the manager of Microelectronics in the Space Electronics Capability organization.

What You’ll Need:
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee
• Industrial experience designing and delivering custom MMICs and/or RFICs to production programs.
• Experience in the design and delivery of high efficiency, high linearity power amplifiers required.
• Experience designing custom MMICs in Gallium Arsenide (GaAs) and Gallium Nitride (GaN) semiconductor technologies.
• Preferred Qualifications (Desired Skills/Experience):
• Demonstrated technical experience in the field of RF electronics and MMIC/RFIC circuit design.
• Additional experience in the design of RF systems or subsystems and the ability to decompose RF system requirements to MMIC and RFIC requirements is desired.
• Experience with RF/MMIC circuit design in SiGe RFIC components.
• Experience in ECAD tools; including Microwave Office or ADS, Ansys HFSS, Sonnet, and Axiem, etc.
• Experience in non-linear FET modeling and load-pull measurements.
• Experience Microwave/millimeter-wave and Printed Circuit Board design (PCB) and Microwave packaging.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience).
• ABET accreditation is the preferred, although not required, accreditation standard.

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10224
Job Location: El Segundo, CA
Input Date: 11/22/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Electrophysics Engr/Scien 5

Description:
PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

Summary:

  • Reviewing supplier and partner qualification data.
  • Nuclear Hardening analysis and test.
  • EMI/C analysis and test.
  • EMSEC/TEMPEST analysis and test.
  • HIRF/Lightning analysis and test.
  • RF Co-Site analysis.
  • Antenna Coupling analysis.
  • Electrical Power Quality and Load analysis.
  • Test Automation for aircraft modifications.

Other job responsibilities may include:

  • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate multiple systems into higher level systems and platforms.
  • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
  • Develops new and improved modeling and simulation techniques.
  • Leads development and execution of critical tests to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Creates new tools to improve management of projects.
  • Leads development of major sections of large-scale proposals to support development of new business.
  • Works under consultative mentorship.

Prerequisites:
  • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
  • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
  • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
  • Must possess good organizational, interpersonal, and problem solving skills.
  • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
  • Ability to adjust priorities to multiple demands and unanticipated events.
  • Highly motivated and must work well in a team environment.
  • The ability to communicate effectively, both verbally and in writing.

Preferred Qualifications:

  • Active U.S. Security Clearance/TS is a plus.
  • Previous experience in the defense or aerospace industry.
  • Previous experience in Electrical Effects.

 
Job Number: 1910108675
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherine Ibusuki
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJCQA2&URLSource=cjhunter

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 3 CA

Description:
166956 Engineer Manufacturing 3 (Job Number: 19035489)

Max Pay Rate: $44 - $48/HR

Shift: Multiple

Target Start Date: Apr 6, 2020

Target End Date: Apr 2, 2021

Work schedule: 4/10

Duration: Up to 1 year

Location: Palmdale, CA

# of positions: 4

Manufacturing Engineering job duties involve the following: provide guidance to Engineering regarding design concepts to ensure the best manufacturing technique is being used to meet the Engineering design, participate in tool design reviews to ensure tools are feasible and reduce build times and program costs during assembly, define sequence of operations for product builds, investigate and initiate corrective actions and improvements that involve non-conforming product and identify improvement opportunities in areas that require producibility and affordability initiatives. Provide liaison support for Engineering definition to influence low production costs for integrated assembly related to electrical, hydraulics, fuels, fluids and propulsion systems.

Manufacturing Engineers for Aerospace Systems are expected to provide technical solutions to a wide range of complex and difficult problems. They are problem solvers who have the ability to provide results that are innovative, thorough, practical, and consistent with organization objectives. We seek Manufacturing Engineers that use a unique skill set that includes a hands-on approach and act as the technical representative voice for the Manufacturing organization.

•Minimum of a Bachelor's Science Degree in STEM (Science, Technical, Engineering or Mathematical) and 5 years of experience in manufacturing engineering or an engineering related field.
•Experience reviewing and interpreting Blueprints and 3-D models
•Experience with Microsoft Office Suite and Enterprise Resource Planning (ERP) systems
•Ability to interface/communicate with multiple levels of leadership, clients, and vendors

Preferred Qualifications:

•Composite experience and process knowledge
•Experience working hands-on in a production assembly line environment
•Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
•Extensive experience in any of the following subjects:
Electrical
Systems
Composites
Automation
Tooling
 
Job Number: JK-1826ATO
Job Location: Palmdale, CA
Rate: 48/hr max
Per Diem: pd split possible
Duration: 1 year
Input Date: 12/30/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineering - Structural Design / aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures - Clearance CA

Description:
166802 Job Title: Engineering - Structural Design

Work Site Address: Palmdale, CA 93599
Job Number: 2582-1
Max Pay Rate: $80.00/hr
Start Date: 12/3/2019
End Date: 1/11/2021
Position Type: Contract


Job Summary:
Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well.

Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS, Hydraulic, Harness, Subsystems) to ensure that designs meet customer and derived requirements. Layouts, studies, new drawings, revised existing drawings, and ECNs (Engineering Change Notices) will use Catia V5 and require a strong understanding of GD&T and Interchangeability. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests and repairs. The role could include airframe layout, rough sizing, preliminary design, detail design and drawing release.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.

Qty 15 positions
 
Job Number: JE-2582-1S5
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/17/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Engineering Laboratory Technician

Description:
Chipton-Ross is seeking a Engineering Laboratory Technicianfor an opening in Mesa, AZ.

RESPONSIBILITIES:
This position is an Engineering Laboratory Technician position. This position will support engineering investigation of production issues, material qualifications, process development, and receiving inspection / shelf life testing of composite materials. This is a hands on position that will require manual dexterity and the ability to stand for several hours.
Evaluate parts, materials, processes, technology, or equipment through research and testing to ensure safety, reliability, and adherence to requirements and specifications. Analyzes failed parts and processes to reduce or eliminate future failures. Determine root cause and document results and recommendations. Support continuous improvement of products and processes by fabricating, testing, evaluating, and implementing new concepts and technology. Provide knowledge and technical consultation to internal and external customers.

Skill and ability to: collect, organize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
Knowledge of production processes and manufacturing capabilities associated with composite and polymer systems. (e.g., design definition, industrial specifications, engineering drawings, and supplier data). Ability to read and interpret engineering drawings and specifications (e.g., blueprint/schematic reading, specification, change).
Knowledge and understanding of composite and polymer laboratory protocols and procedures.
Knowledge of materials and processing for polymers and composites (e.g. molding, forming, lay-up, co-curing, co-bonding, infusion, repair, surface preparation).

REQUIRED EXPERIENCE:
Must have experience with the following:
Environment: Aerospace Engineering laboratory or Aerospace R&D Laboratory
Knowledge of polymers and composite materials (such as carbon, fiberglass, aramid, adhesives, thermoset/thermoplastic resins).
Fabrication: Lay-up, Environmental Conditioning, Machining,
Equipment: Scales, Furnaces, Ovens, Autoclave, Heated Platen Presses
Collect, organize, synthesize, and summarize test results
Advanced experience with Microsoft Office applications.

EDUCATION:
Accredited education/experience typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 3:30 PM

MISCELLANEOUS:
This position will be on a 9/80 schedule, with every other Friday off.

 
Job Number: 182813
Job Location: Mesa, AZ
Rate: $DOE
Duration: 12 Months
Input Date: 11/05/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / RTL Hardware Engineer

Description:
*This is a full time, 1 year contract to hire position located in Nashua, NH*



We are seeking an electronic hardware engineer who will support and develop FPGA/RTL designs from design to system integration (design, test, troubleshoot) for embedded military/aerospace analog/digital/mixed signal multi-layer circuit card assemblies/applications.



Candidate duties will include RTL coding, VHDL synthetization placement and routing. For the work, Xilinx Vivado and possibly Altera, Microsemi, Lattice FPGAs will be used. Candidate will be responsible for their design, update/create the specs, and create the RTL design (from bottom up) or from a leveraged code block. Candidate will make a standalone testbench for the design to test basic functionality before handing it off the Design Verification team for detailed testing. Once complete, the designed product will go to the lab for testing and debugging.



Required:
*10 years of FPGA or ASIC digital circuit design in RTL/VHDL (RTL designers also considered)
*Experience with Source Control Tools/Bug Tracking; experience working in a lab environment
*Experience with lab Integration, debug, root cause analysis, lab tools.
*BSEE or equivalent
*Active Secret Clearance



Pluses:
*Xilinx Vivado Verilog or System Verilog
*Linux, GIT Bug Tracking tool such as GForge or JIRA
*FPGA verification and validation
*Testing of VHDL source code, DSP PCIE
*Serial interfaces (MIL-STD-1553, ARINC-429, RS422, RS485, etc), backplane buses including VME, PCI, PCIE
 
Job Number: 562
Job Location: Nashua, NH
Rate: 80.0
Per Diem: yes split
Input Date: 11/08/2019
Last Updated: 12/20/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fabrication Specialist

Description:
Fabrication Specialist

Job ID # 2019-10292

Contract Opportunity

Location: New Orleans, LA

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain - NASA

Minimum Education: High School Diploma - GED

 

What You’ll Do:

Perform FOD (foreign object debris) monitoring tasks in support of the SLS.
Perform walk downs of the FOD area at the beginning of each shift.
Monitor tool controls and provide coaching on tool and part procedures.
Monitor personnel entering or exiting FOD critical areas.
Log in/out shop consumables, small parts and tools, verify proper tethering and stowage procedures are followed and perform FOD checks at the end of each shift.
Perform 5S/area organization tasks as assigned.
Escort suppliers and visitors throughout the factory as needed
 

What You’ll Need:

This position requires the ability to obtain badging for NASA facility access.
This is a sensitive/safety-sensitive position and is subject to NASA (DOT) random drug and alcohol testing.
This position requires everyone to wear steel toed shoes.
This position requires the individual to perform work in an operational complex while maintaining a safe manufacturing environment. Individuals are required to train, understand, and observe extensive safety and process controls to help protect persons and equipment.
This position may support a 24/7 maintenance operation.
This position requires the ability to perform manual labor inside or outside throughout the year in a variety of extreme weather conditions.
The employee must meet medical requirement for work in geographic areas.
The employee must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of
approximately 35 pounds.
Applicant may operate a forklift and mobile crane.
The work shift and baseline work schedule may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime.
Applicant must be available immediately.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:

Education/experience typically acquired through basic education (e.g. high school diploma/GED).
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10292
Job Location: New Orleans, LA
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Final Line Mechanic I

Description:
PDS Tech is seeking a Final Line Mechanic I for an open position in Savannah, GA.

Purpose
In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. 

Principal Duties and Responsibilities: 



  •  Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware.
  • Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs.
  •  Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity.
  • Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system.
  • Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation.
  •  Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary t o facilitate and perform basic repairs.
  • Update and sign required logs and records as required.
  •  Check own work to ensure a defect free installation prior to final inspection.
  • Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations.
  • 1 Demonstrate Manufacturing competencies in the employee effectiveness review.
  • Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc.
  • Support continuous improvement processes as assigned. 



Additional Functions:
1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
2. Perform other duties as assigned.   




 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc.
  • A&P license may offset the one (1) year of experience required.

Unique Skills:

Excels working in Team environment



Other Requirements:



  •  Solumina and Smarteam experience preferred
  • Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. 


 



 


 

 
Job Number: 1910107120
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 10/03/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fLjSQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 10/15/2019
Last Updated: 12/09/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Flight Test Engineering Manager

Description:
PDS Tech, Inc is seeking a Flight Test Engineering Manager for a direct position in Moses Lake, WA.
As a Flight Test Aircraft Manager, you are the senior program manager responsible to the Director, Flight Test Team for your assigned Flight Test Vehicle’s (FTV’s) work scope, performance, and schedule. To be successful in this role you will use your Flight Test Program Management skills daily.

  Responsibilities:
  • Assign work, goals to your FTV team to maintain flight test schedule
  • Carry out flight test activities, planning, hazard analysis, readiness, and risk/safety reviews
  • Oversee and confirm aircraft configuration for flight tests
  • Perform technical review and processing of specific aircraft test planning documents
  • Ensure flight/ground test readiness while avoiding schedule delays
  • Provide daily and weekly FTV status
  • Resolve issues with functional leads, including engineering, instrumentation, supply chain, maintenance/quality, flight operations, and suppliers

Minimum Qualifications:
  • Bachelor’s degree required in an engineering discipline (or other technically relevant field), with a Master’s degree, preferred
  • 5+ years of managerial experience in aerospace/aviation
  • Demonstrated ability to coordinate programs across teams, create and manage schedule and budgets.
  • Demonstrated ability to lead cross-functional teams in a complex, dynamic environment with polished presentation skills.
  • Comprehensive knowledge of CFR Part 21 and 23 or 25, knowledge of aircraft design, testing and certification, testing operation duties including flight test, structural testing, and instrumentation
  • Willingness to work extended hours and weekends along with travel associated with aircraft testing deployments

 
Preferred Qualifications:
Comprehensive Knowledge of the following:

  • Aircraft performance
  • Stability and Control
  • Aerodynamics
  • Thermodynamics
  • Flutter

 
Job Number: 1910107850
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/17/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fOpOQAU&URLSource=cjhunter

Flight Test Engineering Manager

Description:
PDS Tech, Inc is seeking a Flight Test Engineering Manager for a direct position in Moses Lake, WA.
As a Flight Test Aircraft Manager, you are the senior program manager responsible to the Director, Flight Test Team for your assigned Flight Test Vehicle’s (FTV’s) work scope, performance, and schedule. To be successful in this role you will use your Flight Test Program Management skills daily.

  Responsibilities:
  • Assign work, goals to your FTV team to maintain flight test schedule
  • Carry out flight test activities, planning, hazard analysis, readiness, and risk/safety reviews
  • Oversee and confirm aircraft configuration for flight tests
  • Perform technical review and processing of specific aircraft test planning documents
  • Ensure flight/ground test readiness while avoiding schedule delays
  • Provide daily and weekly FTV status
  • Resolve issues with functional leads, including engineering, instrumentation, supply chain, maintenance/quality, flight operations, and suppliers

Minimum Qualifications:
  • Bachelor’s degree required in an engineering discipline (or other technically relevant field), with a Master’s degree, preferred
  • 5+ years of managerial experience in aerospace/aviation
  • Demonstrated ability to coordinate programs across teams, create and manage schedule and budgets.
  • Demonstrated ability to lead cross-functional teams in a complex, dynamic environment with polished presentation skills.
  • Comprehensive knowledge of CFR Part 21 and 23 or 25, knowledge of aircraft design, testing and certification, testing operation duties including flight test, structural testing, and instrumentation
  • Willingness to work extended hours and weekends along with travel associated with aircraft testing deployments

 
Preferred Qualifications:
Comprehensive Knowledge of the following:

  • Aircraft performance
  • Stability and Control
  • Aerodynamics
  • Thermodynamics
  • Flutter

 
Job Number: 1910107246
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/03/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fM8WQAU&URLSource=cjhunter

Flight Test Instrumentation Technician

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technician for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.

 
 Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108506
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/04/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIIQA2&URLSource=cjhunter

Flight Test Instrumentation Technologist

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Technologist for a direct position in Moses Lake, WA.
Summary

As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Fabrication of support brackets and sheet metal parts
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment

Required:
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience

              -Or-

  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment


Desired:

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1910108504
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/28/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSI8QAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Manager

Description:
Required:
• Engineering Degree
• Industrial Engineering background
• Either a Green Belt, or Black Belt in Lean/Six Sigma Practices
• Experience with “cost out”, process improvement, lean processes, analytical background.
• Must have experience managing/leading groups of 8+ Industrial Engineers.
• Must have an aerospace background
• Will consider someone who has lead experience from larger companies leading groups of 8 plus engineers, but would prefer someone with management experience.


Job Description
Summary Statement: Plans, directs and coordinates activities of an industrial engineering department in the utilization of facilities, equipment, materials and personnel to improve efficiency of operations relative to the production of components, parts, systems and subsystems of operational aircraft. Possesses extensive knowledge of department processes and manages subordinate staff in the day-to-day performance of their jobs to ensure that project and/or department milestones and goals are met and adhering to approved budgets.




The Structures Company is an AA/EOE.
 
Job Number: 353
Job Location: Tulsa, OK
Rate: $100-$130K **DOE***
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 12/20/2019
Last Updated: 01/19/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information Security Systems Engineer

Description:
Information Security Systems Engineer

Location: Melbourne, FL (32919)



Job Description:
Searching for talented experienced Information Security Systems Engineering professionals to join the Security Tier 2/3 Operations Engineering Team, these are Specialist Information Security Systems Engineer (ISSE) positions. These positions may require weekend and after hours work to meet program requirements. Specific duties will include:

Act as primary engineering support to Security Operations for the testing and evaluation of new Security products and services.
Security operations engineering design, testing and implementation.
SOA-based security architecture evolutionary testing and operational support for NIST-certified networks and systems.
Traffic Intelligence (pcap) system development and testing.
Enterprise security gateway configuration and system performance testing.
Web App Firewall (WAF) configuration and technical support.
Global and Local Load Balancer configuration and technical support.
Enterprise Firewall configuration and technical support.
XML Gateway configuration and technical support.
Security Information and Event Management (SIEM) infrastructure capabilities evaluation and test support.
Develop, maintain and publish technical documentation in accordance with L3Harris Systems Engineering processes.


Basic Qualifications:

Bachelor’s degree in Computer Engineering, Computer Science, IT Security or related field, and minimum 4 years related experience.
2 or more years of experience in the Information Security field.
2 or more years of experience in the network engineering fields (Firewalls, Routers, Switches, VPN).
Experience in NIST security policies and processes.
Work experience with Traffic Intelligence architectures.
Experience with system logs and log analysis.
Experience with Linux and Windows Operating Systems (OS).
Preferred Qualifications:

Experience serving Government customers in a security environment is a plus.
Prior FAA program experience is a plus.
Comp TIA Security+, or higher, certification.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58372
Job Location: Melbourne, FL
Per Diem: Possible
Start Date: ASAP
Input Date: 11/26/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 09/03/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
M&P (Material & Process) / Project Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
As M&P (Material & Process) / Project Engineer at Evacuation Solutions site, the successful candidate must be comfortable working with minimal guidance and have the ability to communicate training and instruction to the engineering Community. The engineer should be able to recommend materials and processes, write specifications, ensure compliance of materials with internal, customer, and environmental requirements, conduct failure investigations, write reports, develop and conduct test plans, and support the disposition of materials with quality questions. The position requires interfacing with internal and external customers as well as suppliers, strong organizational, verbal and written communication skills, and safe lab working practices.

Additional typical M&P/Project Responsibilities may include:
• Collaborates with engineering staff to identify possible chemical or materials engineering related problems.
• Analyzes, researches, and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering design of and/or application in structures, systems and subsystems.
• Performs material analyses that include, but are not limited to, failure analysis, for parts, systems and subsystems, and definition and requirement specifications.
• Supports the development of project plans, schedules and budgets.
• Execute tasks aligned with the engineering standard work tool.
• May be assigned limited responsibility for managing project obligations, such as management of technical documentation package for a product.
• Manages simple to moderately complex/sized projects including hardware design, testing and processing.
• Supports the development of project plans, schedules and budgets for projects under his/her responsibility to ensure adherence to the established program plan, schedule, and budget.
• Maintains and presents plans and progress reports relating to business aspects of the project(s) to track progress and ensure that established targets are met.
• Identifies and addresses project problems and recommends resolutions to ensure the successful completion of projects.
• Facilitates project tasks with the various functional organizations to ensure alignment with overall project objectives.

Basic Qualifications:
Prior M&P experience preferred.
Mechanical/Aerospace experience preferred.
This individual should be considered a technical professional in the development and regulatory approval of aircraft systems.

Education Requirements:
Bachelor’s degree from an accredited institution and three years of prior relevant experience. Engineering degree required. Master's degree in Engineering preferred. In the absence of a degree, 7 years of relevant experience is required.
 
Job Number: 11875
Job Location: Phoenix, AZ
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/18/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Controllers

Description:
STS Technical Services is hiring Aircraft Maintenance Controllers in Estero, Florida!

We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.

Job Summary:
Shall positively support and promote safety, security and quality as a fundamental function of the overall responsibility
Alert down-line and other out-stations to secure emergency maintenance that will cover unforeseen maintenance problems and ensure the proper arrangements are made for timely repairs
Monitor aircraft maintenance operations and provide technical assistance to ensure all repairs are completed in accordance with company and Federal Aviation Regulations and maintain safety and on-time operation of flight schedules
Maintain continuous liaison with NCC, providing current and continuing reports of the general mechanical status of the entire fleet and coordinating maintenance requirements during irregular operations to minimize extra costs and disruptions
Ensure all inoperative systems are operated and maintained in accordance with the Minimum Equipment List (MEL), Configuration Deviation List (CDL) or other WGA approved deferrals, and take necessary measures taken to correct these items
Ensure the timely repair of all aircraft with a repetitive history, soliciting or requesting any additional technical information necessary, and directing actions to be taken to minimize cost and unnecessary part replacement
Ensure control of the DI and CI logs in accordance with the correct MEL usage
Issue control numbers and expiration dates to field personnel, and ensure that proper tracking is maintained
Coordinate as necessary with other maintenance areas to ensure availability of required components, parts, and/or troubleshooting expertise to expedite maintenance and repair of aircraft at maintenance base or at down-line stations
Coordinate ferry flights with all concerned departments
Notify appropriate management personnel in the event of an incident or accident, in accordance with instructions in the Emergency Response Manual
Notify the Manager of Manager of Maintenance Control of any situation or practice not within Maintenance Manual requirements that could compromise safety or add unnecessary costs to the maintenance department
Review all faxed or e-mailed log pages for accuracy and compliance with GMM chapter 7
Identifying and entering mechanical interruptions in the electronic maintenance tracking program
Qualifications:
FAA A&P certificate
Minimum 1 year MX controller experience
Minimum 5 years MD11 and/or B747-400 experience
Willing to relocate to Estero, FL
Good communication skills
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49890
Job Location: Estero, FL
Input Date: 11/19/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Manufacturing Engineer - Entry level

Description:

Job Purpose


Direct support of manufacturing processes including technical disciplines for tooling, part fabrication, assembly, inspection and delivery. Apply "state of the art" processing technology as it applies to both materials and techniques.
 
Principal Accountabilities

  1. Maintain positive team relationships with internal and external customers, as well as co-workers.
  2. Responsible for ensuring parts, assemblies, and tools meet industry standards and customer requirements.
  3. Develop technical solutions to complex problems.
  4. Responsible for technical support of manufacturing development and integration for production.  Resolve issues pertaining to vendor schedule and/or quality.
  5. Utilize root cause analysis and corrective action to reduce/eliminate non-conformances.
  6. Continuously improve production processes by implementing Lean initiatives including the application of APQP tool sets for process driven product control (training will be provided) .
  7. Accountable for product development, new product quotes, tool fabrication quotes, first article development, configuration changes that involve cost estimation, schedule coordination, build process definition, and implementation.
  8. Responsible for disposition and follow up on nonconforming materials, detail parts or assemblies in support of Material Review Board activity.
  9. Responsible for the implementation of tooling and or production planning, from original concept through to production.  Responsible to validate the tooling functionality and or part conformity, and production part quality in timely manner to support the customer delivery schedule.
  10. Work in a team environment to document last article process and ensure successful transition of work between plants/sites.

*** Must be a US Citizen with an ABET accredited engineering degree to be considered. 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
Must be a US Citizen with an ABET accredited engineering degree to be considered. 

Education
B.S. degree in engineering or related discipline. Graduation date within the last 24 months. 

Physical Demands



  • Frequently required to spend long hours sitting at a work stations and using office equipment. 
  • Frequently required to spend long hours walking and standing on the production floor.
  • May be required to walk or stand for brief periods.
  • May be required to use stairs when elevator is not available.
  • Must occasionally lift, carry, push, pull or otherwise move up to 25 pounds of office supplies and materials.
  • May be required to reach with arms and hands and to stoop, kneel or crouch.
  • Some travel may be required.


Competencies



  • Relentless and results driven performer with a continuous improvement mind-set. 
  • Demonstrates personal leadership skills; high performance behaviors, self-initiative, excellent work ethic, exercises good judgment, influencing, and collaboration.
  • Superior interpersonal skills, delivers information clearly and factually. 
  • Superior prioritization and planning skills.  A detail oriented individual who proactively engages with leaderships to mitigate risks.

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
 
 
Job Number: 1910106434
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 12 months
Input Date: 09/17/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fIEuQAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
This position supports the Planning Implementation Development and Analysis Functional team in the development and delivery of Program Planning capabilities to programs and projects.
Responsibilities include the development, deployment, and implementation of processes, training, and tools in support of the Program Planning discipline.
This position will be an active participant in the evaluation of program planning/scheduling products and practices, and will be instrumental in the resultant remediation activities upon identification of gaps.
Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned Value Management System (EVMS) Experience, DCMA Health Metrics/Data Driven Metrics Knowledge.
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position). Secret Clearance preferred,
 
Job Number: 11-18-1
Job Location: Ft. Worth, TX
Rate: 75.00/hr.
Per Diem: split
Overtime: yes
Duration: 12 months +
Start Date: ASAP
Input Date: 11/18/2019
Firm Name: TECH RESOURCES LLC
Address: 537 WARREN AVE
City, State: ST LOUIS, MO 63130
Phone: 314/862-2090

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
****Active Secret Clearance highly preferred****

Job Description:
1. This position supports the Planning Implementation Development and Analysis Functional team in the development and delivery of Program Planning capabilities to our clients Business programs and projects.
2. Responsibilities include the development, deployment, and implementation of processes, training, and tools in support of the Program Planning discipline.
3. This position will be an active participant in the evaluation of program planning/scheduling products and practices, and will be instrumental in the resultant remediation activities upon identification of gaps.
4. One-on-one mentoring of planners, formal process and tools training, and leadership of team meetings are techniques that will be employed by this position in order to develop bench strength among the planning community, and to improve planning work products.
5. Demonstrate strong communication and interpersonal skills to work in a team environment.
6. Possess ability to prepare status reports, metrics and make presentations as required.
7. Must be outgoing, energetic, self-starter and have demonstrated Program Planning and Scheduling hands on experience.

Desired Skills:
1. Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned Value Management System (EVMS) Experience, DCMA Health Metrics/Data Driven Metrics Knowledge. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
2. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.
3. Candidates with Secret Clearance are preferred.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
2. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
 
Job Number: 11844
Job Location: Fort Worth, TX
Rate: $48.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/05/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
****Active Secret Clearance highly preferred****

Job Description:
1. This position provides Planning/Scheduling support to meet multiple immediate requirements across our client.
2. Responsibilities include the development and maintenance of components of the Program Integrated Master Schedule, including proposal schedule development, review/support Statement of Work and Basis of Estimate development.
3. The ideal candidate will drive communication and integration across a variety of program functional organizations such as Engineering, Procurement, Contracts, Business Management, Program Management and Manufacturing.
4. Candidate will need knowledge of Critical Path Methodology and be able to apply it in schedule network development and analysis.
5. This candidate will be able to perform complex schedule analysis and develop recommended courses of action to be delivered to internal and external customers.
6. Demonstrate strong communication and interpersonal skills to work in a team environment.
7. Possess ability to prepare status reports, metrics and make presentations as required.
8. Must be outgoing, energetic, self-starter, flexible and demonstrate Program Planning and Scheduling hands on experience.
9. Additional responsibilities will be assigned as required.

Desired Skills:
1. Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned value Management System (EVMS) Experience, Proposal Development Experience.


Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
2. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
3. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.
 
Job Number: 11843
Job Location: Fort Worth, TX
Rate: $48.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/05/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
Location: Palmdale, CA
Rate: $48.86/HR
Duration: 8 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation must be completed within the last 5-years****

Job Description:
1. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
2. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Required Skills:
1. Microsoft Project and/or Open Plan Experience.
2. Milestones Professional Experience.
3. Proven Planning and Scheduling Expertise.
4. Proposal and Program Execution Experience.
5. Demonstrated Earned Value Management System (EVMS) Experience.
6. DCMA Schedule Metrics/Data Driven Metrics Knowledge.
7. Schedule Risk Analysis SRA experience.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11150
Job Location: Palmdale, CA
Rate: $48.86/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 8 mos
Input Date: 07/02/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner - no clearance TX

Description:
166820 Job Title: Master Planner

Work Site Address: Fort Worth, TX 76108
Job Number: 2559-1
Max Pay Rate: $75.00/hr
Start Date: 11/12/2019
End Date: 12/18/2020
Position Type: Contract


Job Summary:
This position provides Planning/Scheduling support to meet multiple immediate requirements across Aeronautics Line of Business.

Responsibilities include the development and maintenance of components of the Program Integrated Master Schedule, including proposal schedule development, review/support Statement of Work and Basis of Estimate development. The ideal candidate will drive communication and integration across a variety of program functional organizations such as Engineering, Procurement, Contracts, Business Management, Program Management and Manufacturing. Candidate will need knowledge of Critical Path Methodology and be able to apply it in schedule network development and analysis. This candidate will be able to perform complex schedule analysis and develop recommended courses of action to be delivered to internal and external customers. Demonstrate strong communication and interpersonal skills to work in a team environment. Possess ability to prepare status reports, metrics and make presentations as required. Must be outgoing, energetic, self-starter, flexible and demonstrate Program Planning and Scheduling hands on experience. Additional responsibilities will be assigned as required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Desired Skills: Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned value Management System (EVMS) Experience, Proposal Development Experience.

Skills: Category Name Required Importance Experience
Soft Skills Ability to meet deadlines No 9 6 + Years
Soft Skills Analytical Ability No 9 6 + Years
Software Skills MS Excel Advanced No 1 6 + Years
Technical Skills Earned Value Analysis No 1 6 + Years

Qty 2 position
 
Job Number: JE-2559-1
Job Location: Fort Worth, TX
Rate: 75/hr max
Duration: 13 months
Input Date: 12/16/2019
Last Updated: 12/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Program Manager

Description:
** Looking for a candidate with a strong background in aerospace procurement/supply chain, project management, earned value analysis with strong people skills. Commodity focus is in machined parts and electronics. Able to travel nationally at a moments notice with ability to create and present status reports to company leadership. **

Duties:
-The Material Program Manager Specialist will be responsible for managing the performance of suppliers supporting various Programs.
-This candidate will interface with procurement and the engineering community to drive resolution of technical, schedule, and administrative material issues.
-The candidate will be responsible for effectively identifying supplier delivery issues, developing performance improvement strategies, and leading the implementation to support program needs and timely material delivery.
-This position requires frequent travel to various suppliers across the country supporting company Programs.
-This candidate will utilize their background and expertise to communicate between team members, customer counterparts, and suppliers, to provide assurance that the hardware is compliant to purchase order requirements.
-Furthermore, the candidate will be responsible for developing strategic plans to manage the performance of the supplier and integrating the aforementioned team members to successfully execute the plan.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.

60% - Manage supplier quality and delivery performance, identify delivery issues and coordinate solutions with suppliers, procurement, and engineering. Lead all reviews with suppliers.
30% - Drive corrective and preventative action activity at the supplier, and provide corrective action support to manage timely and effective issue resolution and control.
10% - Act as primary SCMM (Supply Chain/Material Management) interface for customer and management meetings at supplier locations.


Skills:
-Excellent written and oral communication skills required.
-Must be willing and able to travel on a regular basis to support supplier performance and program office delivery requirements.
-Knowledge of Supply Chain practices, procedures and MRP/ERP systems expected.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.
-This job will require extensive travel - up to 50% travel.
-Knowledge of Oracle ERP systems desired

Education:
-Requires a Bachelor's degree and ten (10) years of directly related experience or an equivalent combination of education and experience.
 
Job Number: 11266
Job Location: Redmond, WA
Rate: $50.00 - $58.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 12/09/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/08/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 06/11/2019
Last Updated: 12/02/2019
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Mechanical Inspector

Description:
Chipton-Ross is seeking a Mechanical Inspector for an opportunity in Los Angeles, CA.

RESPONSIBILITIES:
" Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials.
" Approves in-process production by confirming specifications; conducting visual and measurement tests; communicating required adjustments to production supervisor.
" Approves finished products by confirming specifications; conducting visual and measurement tests; returning products for re-work; confirming re-work.
" Documents inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database.
" Keeps measurement equipment operating by following operating instructions; calling for repairs.
" Prepare and interface with both Customer and Government source

REQUIRED EXPERIENCE:
" Minimum 4 years previous experience
" Defense/Aerospace experience preferred
" Ability to read and interpret schematics, blueprints
" Knowledge of GD&T
" Ability to lift up to 25lbs.
" Knowledge or familiar with ANSIY14.5M Geometric Dimension and Tolerance
" Knowledge and experience in inspecting molded plastic and rubber products, ceramic, connector and cable assemblies.
" Familiar with First Article Inspection (FAI) process and familiarity with AS9100 requirements a plus.
" Computer literate and familiar with using Microsoft Office products including email
" Detail orientated and organized with good verbal and written communication skills.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift

 
Job Number: 181089
Job Location: Los Angeles, CA
Rate: $DOE
Duration: 5-7 months
Input Date: 08/16/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Juan Saldarriaga
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jsaldarriaga@chiptonross.com
Website: www.chiptonross.com

Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 01/20/2020
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mission Safety Engineer MIL-STD 882

Description:
*This is a full time, 10 month contract, located in Grande Prairie, TX*



We are hiring for a contract early career Safety Engineer who will ensure products sold to customers are safe for use. The responsibilities will be to conduct preliminary, system hazard, subsystem, operating and functional Hazard and Fault Tree Analysis per MIL-STD-882.



Daily work may include developing system safety for environmental compliance, prohibited materials, hazardous materials management, pollution prevention, risk assessment, hazard tracking database Flow downs to suppliers, audits, recommend safety features and controls for system design, software, training and procedures to mitigate or eliminate hazards.



Required
*2-3 years’ experience in Manufacturing Safety in an aerospace or defense subcontracting capacity; experience with MIL-STD 882.

*Active Secret Clearance; US Citizens only please
*Experience conducting System Safety designing, audits, testing and verification.
*Candidate must be willing to work overtime and travel as needed.

*Engineering Degree



Pluses:

*Vehicle or weapons familiarity.
*Experience implementing a software safety program in accordance with AR 385-17 or equivalent.
*Ability to manage subcontractors in Safety field of expertise.

*Experience in preparing software system safety documentation and presenting safety case to the SSSTRP or equivalent safety boards
*Knowledge of Human Factors, or Reliability and Maintainability engineering; Hazmat knowledge
*Experience supporting Government conducted tests and providing Safety analysis of test incidents.
 
Job Number: 117
Job Location: Grande Prairie, TX
Rate: DOE
Per Diem: yes split
Input Date: 11/11/2019
Last Updated: 11/22/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

NDT Engineer

Description:
Chipton-Ross is seeking a NDT Engineer for an opening in Mojave, CA.

RESPONSIBILITIES:
Non-destructive test (NDT) engineer with experience in composite materials, processes, and production manufacturing including out of autoclave processing. The engineer will develop NDT methods and maintain specifications for identification and characterization of composite defects used in evaluating damage tolerance, structural life forecasting, and maintaining structural integrity. The engineer will assist in the development and maintenance of composite defect standards for parts and joints. The engineer must be able to recommend and apply appropriate inspection methods and write clear instructions for each technique.
Develop, substantiate and maintain NDT related procedures and process standards to meet customer requirements and assure compliance with applicable regulatory requirements.
Interpret and apply customer, industry, national, and international standards and specifications as appropriate.
Develop NDT defect standards to assist the quality team in inspection.
Work with Design, Stress, and Materials & Process groups to develop and define NDT acceptance criteria to meet damage tolerance requirements for composite structures and joints.
Develop and administer training and examinations as necessary to support qualification and certification of NDT Technicians.
Generate technical reports and presentations. Present findings to Engineering and Upper Level Management.
Evaluate and recommend innovative solutions, applications, and approaches required for meeting business objectives and assuring product integrity.
Establish and maintain effective working relationships. Interact appropriately with others in order to maintain a positive and productive work environment.
Work independently and provide technical oversight for all NDT related activities in the absence of the Principal NDT Engineer.

REQUIRED EXPERIENCE:
Level III Certification in UT and at least two other methods including IR, LST, RT, PT, or ET. ASNT, NAS 410, A4A Spec 105 or equivalent certification will be considered.
A minimum of five years relevant experience for degreed candidates or 10 years for non-degreed candidates.
At least three years' experience as a Level III with a company performing aerospace (or related) NDT.
Experience with materials, fabrication methods and inspection of aerospace composites.
Experience with technical report writing.
Excellent verbal and written communication skills.
Excellent organizational and problem-solving skills.
Strong team player.
Excellent computer skills, Microsoft Word, Excel and PowerPoint. Experience with computer controlled NDT systems is a significant plus.

EDUCATION:
Accredited B.S. degree in Engineering or related applied sciences. Each higher-level degree, i.e., Master's Degree or Ph.D., in a related discipline may substitute for two years of experience. Relevant technical experience may also be considered in lieu of education.

WORK HOURS:
Full-Time

 
Job Number: 179575
Job Location: Mojave, CA
Rate: $70.59 to $90.20 DOE
Duration: 6 Months
Input Date: 09/19/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT II Inspector

Description:
Morson International is currently seeking a NDT Level II Inspector to join our client, a manufacturer of aerospace parts. They are in need of a candidate on a contractual basis to interpret indications and evaluate discontinuities to applicable quality documents and reports results. Aerospace manufacturing experience is required and ideally with performing Ultrasonic Non-Destructive Testing methods.

Responsibilities


Assures that material and parts are properly processed to the applicable NDT Method Specification: Visual, Flo-Pen, Penetrant, Dimensional and x-ray.
Reads and interprets indications and evaluates discontinuities referencing applicable quality documents.
Performs or verifies the performance of systems capability checks specified in the applicable NDT Method Specification.
Conducts regular and complex testing to determine acceptability of material or product.
Examines product for possible internal or external defects.
Sets up equipment, as applicable.
Read or interpret blueprints or drwaings, specifications, and scan procedures in order to accomplish ultrasonic setups, test, and report preparation.
Requirements

High School Diploma or equivalent
Ability to lift 50 pounds and stand for prolonged periods of time
Capable of obtaining customer certification requirements

Desired: Certification in at least one NDT Method and visual weld inspection experience.
 
Job Location: Santa Ana, CA
Rate: $25/hour
Overtime: Yes
Start Date: ASAP
Input Date: 11/25/2019
Firm Name: MORSON INTERNATIONAL
Attention: Stephanie Vu
Address: 10333 RICHMOND AVE STE 445
City, State: HOUSTON, TX 77042
Phone: 713/636-2777
Fax Phone: 713/636-2523
Website: www.morson.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Engineer

Description:
As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the aircraft.

• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
• Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
• Provide validation and verification of powerplant subsystems requirements
• Perform powerplant subsystems tests and certification, and provide system and certification documentation
• Manage the powerplant subsystems scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft



The Structures Company is an AA/EOE.
 
Job Number: 346
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/12/2019
Last Updated: 01/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Principal Mechanical Systems Engineer-

Description:
PDS Tech is seeking a Principal Missions System Engineer in Annapolis, MD

The Mechanical Engineerwill provide structural analysis and structural design support of complex mechanical underwater systems, handling systems, and underwater vehicles. The structural analyst will support development of system design concepts, and evaluation of system characteristics including system trade studies, preliminary designs, detail designs. The structural analyst will also support integration and test activities of individual components, subsystem assemblies, and system level assemblies.
The successful candidate will have background in structural analysis and have proficiency in common analysis tools and analytical techniques. Must have good written and verbal communication skills, and the ability to work both independently and as a member of a multi-disciplinary team in a fast paced environment
 
Basic Qualifications Band 3:
Bachelor's Degree in Mechanical Engineering,Aerospace Engineering, Marine Engineeringor a related discipline and 5 years of related experience with a BS; 3 years of experience with an MS;0 years with a PhD.
Proficiency with analytical techniques including: basic structural analysis and FEA analysis.
Proficiency with structural analysis tools (including MathCAD, MatLab, FEMAP, Patran, ANSYS Workbench (or other pre/post processors), Nastran/ANSYS (or other FEA solvers).
The ability to obtain a Secret Clearance, U.S. Citizenship is a Pre-requisite.
Basic Qualifications Band 4:
Bachelor's Degree in Mechanical Engineering,Aerospace Engineering, Marine Engineeringor a related discipline and9 years of related experience with a BS; 7 years of experience with an MS;4 years with a PhD.
Proficiency with analytical techniques including: basic structural analysis and FEA analysis.
Proficiency with structural analysis tools (including MathCAD, MatLab, FEMAP, Patran, ANSYS Workbench (or other pre/post processors), Nastran/ANSYS (or other FEA solvers).
The ability to obtain a Secret Clearance, U.S. Citizenship is a Pre-requisite.
Preferred Qualifications:
Moderate proficiency in common engineering /office tools (including 3DCAD programs such as NX, MS Office).
Underwater structural analysis experience; autonomous underwater vehicle analysis experience; mechanism design.
TS/SCI Clearance with a Current CI or FS polygraph.

 
 
Job Number: 1910105157
Job Location: Annapolis, MD
Duration: 6 months
Input Date: 08/13/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Ashley Bedore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVqdQAG&URLSource=cjhunter

Principal Project Management

Description:
The qualified applicant will become part of Northrop Grumman's El Segundo site Operations Project Management team, supporting manufacturing and program management activities for the F/A-18 Program within our Conformal Fuel Tank (CFT) development.
 
Roles and Responsibilities:
Provides project leadership to integrate efforts of the project team, program management, functional homerooms, and line management.  Project will be in support of issue investigations, producibility, and affordability.
Reviews status of projects and budgets; manages schedules, prepares status reports, ensures appropriate communications. Assesses project issues and risks, and develops resolutions to meet productivity, quality, and customer objectives.
Develops mechanisms for monitoring project progress and for intervention and problem solving with project managers, line managers, and clients.
Supports CFT efforts with closure of Action Items, Scheduling and Engineering releases, Project management and risk mitigation.
Responsible for Engineering Change Management into the production line. Will participate in Engineering Change planning, change boards, and work around plans.
Backup support for Retrofit and Spares efforts with our Post Production Team and counterparts.

Basic Qualifications:
 
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

6 years relevant work experience with Bachelors; 4 years with Masters Degree
Ability to work in cross functional teams and interact with both managers and customers.
Excellent written and oral communication skills
Ability to organize stakeholders while providing project visibility and closure plans.
Strong Project Management, Leadership and Organization Skills
High competency in Microsoft Office, including Project
Ability to work in fast paced environment, multitask, and flexibility.
 

Preferred Qualifications:
SAP MRP Knowledge
Ability to read engineering drawings
Aerospace and/or Defense Industry Experience
Proven track record of increasing responsibility throughout career path
Experience in multi-functional organization
 
Job Number: x20190175
Job Location: El Segundo, CA
Rate: $50/hr
Duration: up to 1 year
Input Date: 10/30/2019
Last Updated: 01/24/2020
Firm Name: XPEERANT
Attention: Don Semple
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: dsemple@xpeerant.com
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal System Safety Engineer - Clearance

Description:
Key responsibilities include:

Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs • Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
Applying engineering principles to assess design compliance of a complex aerospace system and synthesize rationale and justification for Safety waiver requests and hardware non-compliances
Identifying technical issues, proposing solution options, and following through to resolve the issues with minor supervision
Interfacing with internal and external customers and associates in engineering and program management • Generating and presenting status charts at program and customer meetings.
Requirements:

Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
Minimum 7 years of related experience.
High level understanding of tactical missile subsystems.
Proficient with MS Office suite of products.
Strong interpersonal skills and an ability to build effective working relationships are a must.
Excellent attention to detail.
Excellent oral and written communication skills and technical writing experience.
Ability to communicate findings to varied audiences to gain support or resolve concerns.
Self-starter capable of performing and prioritizing assigned tasks with very little direction.
Familiarity with requirements development and risk management.
 
Job Number: KM - SIGN - 9436479
Job Location: Northridge, CA
Rate: $80-105/hr DOE
Per Diem: No
Duration: 6 months (possible CTH)
Start Date: ASAP
Input Date: 11/25/2019
Last Updated: 12/04/2019
Firm Name: MIDCOM CORPORATION
Attention: Kristine
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Product Repair/Mod Tech C

Description:
Chipton-Ross is seeking a Product Repair/Mod Tech C for an opportunity in Seymour Johnson AFB, NC

RESPONSIBILITIES:
Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. Experienced in the use of tooling assemblies and fixtures for depot level modification and repair of structural parts. Able to perform close tolerance drilling, reaming, removal, and installation to critical support structures and fracture critical areas. Ability and understanding of locating blind holes necessary for installation of new structural items to existing structure. Perform efforts associated with sealing, painting, shimming, and preserving structure in accordance with standard repair processes. Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Works under general direction.

EDUCATION:
Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years' related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years' related work, Bachelor, etc.).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 182914
Job Location: Seymour Johnson AFB, NC
Rate: $DOE
Duration: 12 months
Input Date: 11/08/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Safety Support Engineer

Description:
****MUST be a U.S. Citizen****

COPS Management (required):
Work with Propulsion Systems Product Safety Manager (PSM) to understand and pro-actively manage the propeller product line entries into the Control of Process and Safety (COPS) database.
1. Review Product Safety Review Board (PSRB) approved COPS inputs, enter into COPS tool and track / facilitate through release process.
2. Examine engineering drawings prior to release to ensure alignment between proposed drawing changes and PSRB approved drawing mark-ups.
3. Provide targeted COPS searches and extracts on request.

PSRB / PSI support (required):
1. Assist with finalizing meeting minutes, coordinating drafting with contractor and final review and approval with the Product Safety Manager Check and update potential safety issue (PSI) and AI databases in coordination with Propulsion Systems PSRB minutes drafting and finalization.
2. Perform database queries to support issue management decisions at PSRB and requests from presenters.
3. Guide engineers in developing required documentation for safety part approval at the PSRB using product safety management processes and standard work.

RRCA Team support (additional potential tasks):
1. Assist in coordination of root cause corrective analysis project by task planning, AI tracking and management, and fault tree development.

Safety Risk Analysis (additional potential tasks):
1. Support ongoing needs for Continued Airworthiness Assessment Methodology (CAAM) statistically-based analyses to inform the Propulsions Systems PSRB and the Collins PSB in potential safety issue management decisions for Propellers issues.
2. Work with investigation teams to identify information required for generating risk models for potential safety issues.
3. Construct models to assess risk using Continued Airworthiness Assessment Methodology (Ref. FAA AC39.8)-consistent techniques for unaddressed / uncorrected issues and to evaluate effectiveness of possible Corrective Action Plans.
4. Research historical data to support severity hazard ratio development.
5. Work with statistician to resolve modeling issues.
6. Develop and interpret the models and perform peer reviews to ensure the highest possible analysis integrity.

Required Experience / Qualifications:
1. BS degree with 2+ years’ experience in industrial or aerospace engineering environment.
2. Excel and database processes and management.
3. Engineering drawing notations and familiarity.

Additional Beneficial Experience:
1. Engineering change control processes
2. Critical characteristic identification and management
3. Basic statistics and risk analysis
4. Ability to use Minitab tool for Weibull analysis
5. Systems engineering / reliability engineering

Additional Comments:
1. A desire to understand the relationship of how propeller hardware manufacture and servicing is controlled to ensure the safety of our customers and the flying public is essential.
2. Some experience with Aerospace systems / operation understanding is desirable.
3. Experience with fault tree, Failure Modes and Effects Analysis, and Failure Hazard Analysis methods is a plus.
 
Job Number: 11779
Job Location: Windsor Locks, CT
Rate: $72.42/HR
Per Diem: No
Overtime: Possible
Duration: 2 yr
Input Date: 10/28/2019
Last Updated: 12/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production - Inventory Coordinator

Description:
Production - Inventory Coordinator

Job ID # 2019-10283

Contract Opportunity

Location: Mesa, AZ

Industry: Aerospace & Defense

Minimum Education: High School Diploma - GED

 

What You’ll Do:

Assist with processing and movement of production and other materials into and out of storage, production and other locations to support the flow of production following standard work instructions.
Assist in monitoring work in process.
Post updates to automated systems to insure parts availability.
Identify problems or discrepancies with parts and materials.
Assist within the work group to expedite and complete production activities to avoid schedule delays.
Work under close supervision.
 

What You’ll Need:

Must be willing and able to work any shift.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Education/experience typically acquired through basic education (e.g. high school diploma/GED).
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10283
Job Location: Mesa, AZ
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager - Level 2

Description:
** Candidates must be U.S. Citizens without Dual Citizenship **
**Secret Clearance PREFERRED, not required**

Duties:
1. Our client is seeking a Program Manager to join our Redmond, WA office.
2. Preferably a recent graduate with a BS.
3. In this role, you will support development and production programs.

Essential Job Functions (Including % of Time for Each):
80% - Manages customer relationships; acts as primary customer interface and decision authority for assigned programs. Accountable for scope, risk/ opportunity management, cost and schedule, including earned value management, of assigned fixed price or cost reimbursable propulsion programs. Leads cross-functional program team definition; work package definition, detailed program planning and program baseline development; incorporation of lessons learned; and program execution including direction, control, achievement of program requirements and program closeout.

20% - Creates and manages strategy for development of the business for the propulsion product area. Leads or provides inputs to proposals, contract negotiations, statement of work (SOW) reviews and implementation of program management best practices. Provides and manages the award and sales forecasts for assigned programs and customers.

US Citizenship required. Must also be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement.

Required Skills:
1. Experience with program planning, IMS development, risk and opportunity analysis, contract change management, control account management, work package development, earned value management (EVM) and program execution for cost reimbursable and fixed price programs for U.S. Government or commercial space missions.
2. Demonstrated success in leadership and management of both development and production programs in a dynamic, matrixed environment.
3. Has been a Program management in Aerospace programs, with P and L responsibility.

Desired Skills:
1. Advanced degree in Engineering, Science, Mathematics or Business.
2. Working knowledge of thruster system design, production and performance.
3. Innovative thinking abilities; experience with change leadership.
4. Proven ability to utilize excellent oral and written communication skills to build successful teams; presentation skills appropriate for executive-level briefings.
5. Prior P&L responsibility for programs or business areas.
6. Program Management certification.
7. Active DoD Security Clearance.
8. Experience working on NASA programs

Education:
1. Requires a Bachelor's degree (recent Graduate preferred) and 3 years experience with management of multiple concurrent programs for components through complex systems for space programs (or an equivalent combination of education and experience).
 
Job Number: 11758
Job Location: Redmond, WA
Rate: $37.50 - $51.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/23/2019
Last Updated: 12/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Management

Description:
The qualified applicant will become part of Northrop Grumman's El Segundo site Operations Project Management team, supporting manufacturing and program management activities for the F/A-18 Program within our Conformal Fuel Tank (CFT) development.
 
Roles and Responsibilities:
Provides project leadership to integrate efforts of the project team, program management, functional homerooms, and line management.  Project will be in support of issue investigations, producibility, and affordability.
Reviews status of projects and budgets; manages schedules, prepares status reports, ensures appropriate communications. Assesses project issues and risks, and develops resolutions to meet productivity, quality, and customer objectives.
Develops mechanisms for monitoring project progress and for intervention and problem solving with project managers, line managers, and clients.
Supports CFT efforts with closure of Action Items, Scheduling and Engineering releases, Project management and risk mitigation.
Responsible for Engineering Change Management into the production line. Will participate in Engineering Change planning, change boards, and work around plans.
Backup support for Retrofit and Spares efforts with our Post Production Team and counterparts.
 
Basic Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:


6 years relevant work experience with Bachelors; 4 years with Masters Degree
Ability to work in cross functional teams and interact with both managers and customers.
Excellent written and oral communication skills
Ability to organize stakeholders while providing project visibility and closure plans.
Strong Project Management, Leadership and Organization Skills
High competency in Microsoft Office, including Project
Ability to work in fast paced environment, multitask, and flexibility.
 
Preferred Qualifications:
SAP MRP Knowledge
Ability to read engineering drawings
Aerospace and/or Defense Industry Experience
Proven track record of increasing responsibility throughout career path
Experience in multi-functional organization
 
Job Number: x20190178
Job Location: El Segundo, CA
Rate: $40.00/hr
Duration: 1 year
Input Date: 10/31/2019
Last Updated: 12/02/2019
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Description
Develops, modifies, applies and maintains quality evaluation and control systems and protocols for processing materials into partially finished or finished materials product. Collaborates with engineering and manufacturing functions to ensure quality standards are in place. Devises and implements methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment. Designs and analyzes inspection and testing processes, mechanisms and equipment; conducts quality assurance tests; and performs statistical analysis to assess the cost of and determine the responsibility for, products or materials that do not meet required standards and specifications. Audits quality systems for deficiency identification and correction. Ensures that corrective measures meet acceptable reliability standards and that documentation is compliant with requirements. May specialize in the areas of design, incoming material, production control, product evaluation and reliability, inventory control and/or research and development as they apply to product or process quality. May be certified in lean and six-sigma quality engineering methodologies.
Skill/Experience/Education
Mandatory
Bachelors or Masters degree preferably in Industrial Engineering, Electrical Engineering, Aerospace Engineering, Mechanical Engineering, or related discipline from an accredited college. This position will be located at a facility that requires special access and requires the selected candidate to be a US Citizen.
Desired
Electronic subassembly, CCA experience, Cable and Harness experience Understanding of root cause analysis and corrective action Manufacturing techniques Strong written and oral communication skills Proficient skill level with Microsoft Office applications: Word, Excel, PowerPoint, etc. Ability to work independently and as a team player
 
Job Location: Ocala, FL
Rate: 50/hr
Per Diem: Split
Input Date: 11/27/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Inspector

Description:
Perform visual and dimensional inspections of aerospace components throughout
the manufacturing life cycle; From receiving raw material, in process inspection
of detail components at various stages of completion, and final inspection of
bonded assemblies
• Monitor processes for adherence to company specifications
• Ensure completeness of manufacturing processes prior to initiation of the next
process step
• Document inspection results by completing reports, forms and/or logs, and
inputting data into quality database
• Use calibrated precision measuring equipment to perform dimensional inspection
of machined components
• Use inspection lights, magnifying aids, to look for cracks, galling, corrosion or
other defects
• Compare test results with specifications and reporting non-compliant results
• Participate in training
• Maintain safe and healthy work environment by following standards and
procedures; complying with legal regulations
• Support the calibration technician with calibration activities
 
Job Location: FL
Input Date: 11/22/2019
Firm Name: SEZ AEROSPACE USA LLC
Attention: Addie Kimbell
Address: 1775 9TH ST
City, State: MOBILE, AL 36522
Phone: 251/438-6865
Website: www.sezaerospaceusallc.com

Receiving Inspector

Description:
We are looking for a great Inspector for an Aerospace Company in Los Angeles County.

• Perform First Article Inspections
• High school diploma or GED required
• Knowledge of AS9100 and other relevant aerospace industry standards.
• 2+ years of experience in a manufacturing environment, preferably aerospace, or equivalent education and experience. Previous inspection experience a definite plus.
• Ability to work with Microsoft tools, CATIA, 2D and 3D drawings or computer generated models or other similar types of engineering data.
• Basic math and technical writing skills.
Proven hands-on inspection experience in the aerospace industry using a variety of precision measurement tools.
• GD&T comprehension through experience and/or formal training.
• In depth understanding of the inspection techniques and quality issues associated with composites.
• Attention to detail and follow through.
• Ability to communicate effectively with all levels of company personnel.
• Specific vision abilities (corrected or uncorrected) required for this job include color perception, close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
• Must be able to lift 50 pounds (unassisted).

The Spaceship Company, LLC AA/EOE
 
Job Location: Los Angeles
Rate: $17-$20
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 01/14/2020
Last Updated: 01/24/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Recruiting Manager

Description:
Chipton-Ross has been a leading supplier of contract and permanent labor services to the world's largest aerospace, manufacturing and information technology companies for over 36 years. Working in partnership with fellow managers and recruiters, the successful candidate will develop a strategic recruiting plan and build a top-notch recruiting team.

We are currently seeking a manager to develop a recruiting office in Scottsdale, AZ.

Responsibilities:
- Identify qualified candidates through various recruiting and sourcing tools.
- Screen and interview qualified candidates.
- Hire, train, and coach a small team of recruiters.
- Interact with current clients.
- Solicit new clients and maintain an ongoing pipeline.
- Develop recruitment strategies to exceed monthly sales goals.

The successful candidate will possess:
- Management experience.
- Recruiting, inside/outside sales or retail sales experience is preferred.
- "Go-getter" attitude with a high sense of urgency.
- Strong desire to develop strong cold-calling, negotiation and closing skills and be able pass those attributes to the staff.
- Ability to develop and maintain strong contractor and client relationships.
- Strong drive to be successful.
- Strong communication, organizational, planning, multitasking and analytical skills.
- Training experience.
- Bachelor's degree.

WORK HOURS:
Full Time



 
Job Number: 180953
Job Location: Scottsdale, AZ
Rate: $DOE
Duration: Perm
Input Date: 08/14/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Dan Mulvihill
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmulvihill@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 12/05/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Seeking CREO / Pro-E Design Engineers & Designers

Description:
Seeking CREO / Pro-E Design Engineers & Designers
MUST BE A US CITIZEN
Prefers BSAE or BSME Degreed with STRONG CREO with a lot of aerospace experience. Looking for 9 years of Pro/E mechanical design!!
=========================
If qualified, email a WORD version copy of your resume and then call Peggy to discuss at 774-210-4108.
 
Job Number: PL CREO
Job Location: MI, AZ & CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ mos.
Start Date: 2 weeks
Input Date: 01/08/2020
Last Updated: 01/23/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: plundie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structures Design Engineer

Description:
Summary
• As the Senior Structures Design Engineer you will report to the Structures Manager and be responsible for contributing to the design and configuration of the primary aircraft structures for a business jet.

On any given day you might:
• Be Responsible for subsystems integration and packaging into primary structure
• Design and configure primary aircraft structures
• Analyze the applicability of new and emerging technologies and advanced techniques
• Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements
• Serve as a design focal between the program and Tier 1 suppliers
• Support technical review of supplier capabilities and progress

We're looking for someone who has:
• A bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area
• 7+ years of experience in performing design of large aerospace primary structures
• Strong composite structural design background
• Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry
• Knowledge of CATIA V5 and Teamcenter PLM is preferred
• Surfacing skills is preferred
• Experience with Fibersim or equivalent is preferred
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Thorough understanding of the structural design requirements for Part 25 certification is preferred
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets

We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

Let's Build a Company Together
• We're looking for people from scrappy startups, established corporations, and everything in between.
• Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 42-029
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+year
Start Date: ASAP
Input Date: 12/31/2019
Last Updated: 01/02/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Job ID # 2019-10279

Contract Opportunity

Location: Hazelwood, MO

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain – Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 years

 

What You’ll Do:

Develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
Develop and maintain code and integrates software components into a fully functional software system.
Develop software verification plans, test procedures and test environments, execute the test procedures and document test results to ensure software system requirements are met.
Perform software project management and software supplier management functions.
Develop, select, tailor and deploy software processes, tools and metrics.
Execute and document software research and development projects.
Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
Track and evaluate software team and supplier performance to ensure product and process conformance to project plans and industry standards.
Work under general direction.
 

What You’ll Need:

This position requires the ability to obtain a Secret Security Clearance.
Software Skills: C++, Lunix
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5+ years of related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience).
ABET accreditation is the preferred, although not required, accreditation standard.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10279
Job Location: Hazelwood, MO
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Job ID # 2019-10278

Contract Opportunity

Location: Hazelwood, MO

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 9 years

 

What You’ll Do:

Work with experience software engineers to develop code and guide those experienced software engineers who are learning Angular.
Lead activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
Lead development of code and integration of complex software components into a fully functional software system.
Develop software verification plans, test procedures and test environments, execute the test procedures and document test results to ensure software system requirements are met.
Provide technical leadership for software projects and leads software supplier management activities.
Lead development, selection, tailoring and deployment of processes, tools and metrics.
Plan, execute and document software research and development projects.
Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
Track and evaluate software team and supplier performance to ensure product and process conformance to project plans and industry standards.
Work under minimal direction.
 

What You’ll Need:

Need a software engineer with Angular 2 experience.
Experience with software design/architecture and software requirements is also desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

 

Education & Experience:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9+ years of related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience).
ABET accreditation is the preferred, although not required, accreditation standard.
 

What to Expect:

Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.
 

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

 

 

Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/

 
 
Job Number: 2019-10278
Job Location: Hazelwood, MO
Input Date: 11/27/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Software Engineer 4

Description:
Chipton-Ross is seeking a Software Engineer 4 for an opportunity in Hazelwood, MO.

RESPONSIBILITIES:
The Client's mission is to connect, protect, explore and inspire the world through aerospace innovation. To help enable this and drive our mission forward we are currently seeking experienced software architects to join the Team in St. Louis, MO. As a Software Architect on this team you will work with the Vehicle Health Management Solutions Chief Software Architect to create a common technical vision, make high-level design choices and develop software implementation guidelines to ensure that the software developed will meet functional requirements and design constraints. The software we develop will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board (web-based and cloud deployed) functionality to this software. Prior experience in developing software architectures in a complex system is critical to success in this role.

REQUIRED EXPERIENCE:
Experience developing Large scale, complex software systems
Experience in developing software architectures in a complex system
Experience developing software in an agile environment
Experience developing software in C++ and/or Java
Experience working with embedded, real-time software
Experience working with web-base applications deployed in the cloud
Willingness to work with a geographically dispersed team

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

WORK HOURS: 7:30AM-4:00PM
Full-Time/First Shift

TRAVEL: YES
INTERNATIONAL TRAVEL: YES
Remote possibility of travel to Poland or India.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 182029
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 10/01/2019
Last Updated: 01/24/2020
Firm Name: CHIPTON ROSS
Attention: Daniel McGowan
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: dmcgowan@chiptonross.com
Website: www.chiptonross.com

Software Engineer 4

Description:
**Must be able to obtain Secret Clearance**

At Company, our mission is to connect, protect, explore and inspire the world through aerospace innovation. To help enable this and drive our mission forward we are currently seeking experienced software architects to join our Company Avionics Team in St. Louis, MO. As a Software Architect on this team you will work with the Vehicle Health Management Solutions Chief Software Architect to create a common technical vision, make high-level design choices and develop software implementation guidelines to ensure that the software developed will meet functional requirements and design constraints. The software we develop will monitor and assess aircraft fault data to provide flight deck and maintenance personnel with appropriate information for assessing the health of the aircraft. There will be both on-board (semi-realtime to realtime) and off-board (web-based and cloud deployed) functionality to this software. Prior experience in developing software architectures in a complex system is critical to success in this role.

• Experience developing Large scale, complex software systems
• Experience in developing software architectures in a complex system
• Experience developing software in an agile environment
• Experience developing software in C++ and/or Java
• Experience working with embedded, real-time software
• Experience working with web-base applications deployed in the cloud
• Willingness to work with a geographically dispersed team

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
 
Job Number: 374205
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 10/01/2019
Last Updated: 01/24/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Software Engineers -- Mid-level

Description:
Avionics systems, C++, Ada, DoD secret clearance required to start assignment

Aerospace and Defense Opportunities

For all positions Apollo offers:
-Weekly Paycheck
-Direct Deposit
-Health/Dental Plan
-Immediate 401(k)
-Referral Bonus
 
Job Number: 51727, 51729
Job Location: Oklahoma
Input Date: 01/06/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0308
Email: kpurdy@apollopros.com
Website: www.apollopros.com

Sr Software Engineers

Description:
Avionics systems, C++, Ada, DoD secret clearance required to start assignment

Aerospace and Defense Opportunities

For all positions Apollo offers:
-Weekly Paycheck
-Direct Deposit
-Health/Dental Plan
-Immediate 401(k)
-Referral Bonus
 
Job Number: 51727, 51729
Job Location: Oklahoma
Input Date: 01/06/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0308
Email: kpurdy@apollopros.com
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Supplier Quality Engineer

Description:
We have an outstanding position for a Sr. Supplier Quality Engineer to join a leading Company located in San Diego, CA area.

**Position requires U.S. Citizenship.**

Job Responsibilities:
We are looking for an experienced Supplier Quality Principal Engineer with experience with the manufacturing, inspection and approval of Printed Wired Boards of varied complexity.
This professional will implement tools and processes to ensure suppliers are prepared and have robust plans to deliver first time quality to Systems Program Customers.
The role requires both the experience and the certification on IPC-A-600 and full familiarization with mil-std 883, mil-prf-38534 and other standards.
The selected candidate will also investigate, evaluate, resolve and prevent Quality problems by conducting audits, analyzing defect trends, leading continuous improvement projects and implementing preventive tools.
The Supplier Quality Principal Engineer will conduct capability assessments that verify supplier qualifications, will travel to assigned suppliers, and lead multiple projects to completion.
Job Qualifications:
Bachelor’s degree in Engineering, Computer Science, Computer Engineering or related technology, and at least ten years of experience.
Work Experience in a Supplier Quality Engineering role Experience in Aerospace or a Defense Electronics Prime Contract environment.
Working knowledge of AS9100 Quality System and AS9102B First Article Requirements and Source Inspections Experience with electrical/mechanical inspections, product test, equipment and instrumentation.
Direct knowledge of Manufacturing processes and supply chain logistics from raw material to finished goods including experience with Enterprise Resource Planning (ERP) system.
Effective Problem Solver using Structured Problem Solving methods and systems Effective communicator, able to express ideas clearly, directly and objectively.
Certification on IPC-A-600 Familiarization with mil-std 883, mil-prf-38534 and other related standard Effective, clear communicator and practical problem solver.
Preferred:
Proficient experience Product Production Line Validation, test, equipment, instrumentation and qualification of Mechanical and Fabricated products.
Working knowledge of PCBA/CCA inspection/test, equipment and instrumentation (IPC-A-610 certification desired).
Experience with product test, equipment and instrumentation, knowledge of thermal processes, welding and brazing, finishes and coatings, nondestructive testing, fabrication, composites and other common processes common in the Aerospace and Defense Industries.
Familiarity with APQP and PPAP and process tools such as PFMEA and Control Plan Practical experience with Lean Manufacturing and Lean Six Sigma Green / Black Belt certification from a recognized organization.
Working knowledge of the principles and the purpose of a Quality Management System.
 
Job Number: 39060
Job Location: San Diego, CA
Rate: $34 - 38 DOE
Duration: 12 month initial
Start Date: ASAP
Input Date: 11/22/2019
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Sr Systems Engineer

Description:
Aircraft Engineering & Design--

Candidates should be able to demonstrate the ability to write requirements, DOORS exp; will need to have certification and testing experience; DO-160 experience preferred; solid understanding of systems engineering in a large aerospace environment

U.S. Citizen or Permanent Residency Required

Paid Holidays
United Healthcare Medical Insurance
Dental
Vision
Direct Deposit
 
Job Number: 54094
Job Location: California
Input Date: 07/02/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bernard Barrera
Address: 2500 REDHILL AVE STE 200
City, State: SANTA ANA, CA 92705
Phone: 949/432-7512
Email: bbarrera@butler.com
Website: www.butler.com

Sr. Electrical/Avionics Engineer

Description:
PDS Tech Inc. is seeking a Sr. Electrical/Avionics Engineer, in Grand Prairie, TX.

Send resume to ccallwood@pdstech.com or call Clyde at (813) 463-2513 for more information

Design, modify and integrate custom avionics and electrical packages for new aircraft and/or retrofit.  Create engineering drawings and reports, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and support STC projects. 



Primary Responsibilities:



Detail design: 50%



  • Design wiring diagrams, harness drawings and system architecture
  • Review and facilitate engineering package release
  • Can lead groups of engineers to complete projects along with representing the group at management meetings
  • Works independently with minimal supervision from Engineering Management
  • Work is reviewed upon completion for adequacy in meeting company objectives


Project Coordination 20%



  • Select avionics equipment, wiring and supporting electrical infrastructure
  • Produce avionics specification documentation for individual projects


Engineering Support 20%



  • Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed
  • Act as liaison to manufacturing and production efforts as needed
  • Support installation, functional and operational tests, and ground and flight tests


Substantiation 10%



  • Creates electrical load analysis and environmental qualification reports in support of initial layout and design concept
  • Performs Functional Hazard Analysis and Systems Safety Analysis as required.


Additional Responsibilities:



  • Other duties as assigned

Qualified Experience / Skills / Training: 




Send resume to ccallwood@pdstech.com or call Clyde at (813) 463-2513 for more information

Education:



         Required: Bachelor's degree in Electrical/Aeronautical Engineering from an accredited college/university or equivalent applicable work experience.



         Preferred: Master's Degree from an accredited college/university in engineering



 



Experience:



  •          Minimum of six (6) years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment. 


Knowledge, Skills, Demonstrated Capabilities:



         Knowledge of aviation/aerospace electrical/avionics design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations.  Direct experience with rotorcraft is preferred. 



Communication Skills (Spoken, Written, Influencing, Proficiency in Other Languages):



  •          Must be able to communicate effectively in the English language (verbal and written).
  • Conversational French and/or German is a plus 


Technical Systems Proficiency:



  • Must be proficient with Microsoft Office Suite programs.
  • Minimum 8000hrs AutoCad , familiarity with CATIA V5 and SAP programs preferred


 




Travel Required:



  • 5% Domestic and International


Citizenship:



  • US Person under ITAR definition (U.S. Citizen, green card holder or person covered under our existing ITAR license)


Clearance:



  • None 


Decision Making, Complexity:



Provides technical solutions to a wide range of difficult problems.  Solutions are imaginative, thorough, practicable and consistent with company objective. 



A typical project may involve researching compatibilities among equipment, such as a video router for a customer chosen Camera system, monitors, a DVR, a Mapping System and a wireless video downlink. 



The engineer will be involved with the on-aircraft integration and troubleshooting, as well as addressing installation constraints such as: limited space, connector compatibility and signal shielding requirements. Most importantly, the ability to adapt to shifting technical challenges, being able to communicate with technicians, managers, and the various stakeholders in a project, is key to the success of the team. 



Must be able to assist less experienced engineers through training, design assistance, application of the proper methods, and technical assistance in developing the appropriate electrical/avionics substantiations, and to help develop the decision making ability.  



Job Dimensions, Contributions to Success: 



Position will be responsible for producing high quality drawings that accurately describe how to integrate various systems and avionics.  Success will be measured on first pass yield, innovation, success of integration integrity and compliance to customer requirements/expectations.  



Nature of Contacts:



Involved Communication on a regular Basis with internal parties only 



Physical Requirements: 



  • Onsite: 95%
  • Vision: Daily able to see and read computer screen and other electronic equipment with screens, able to read documents, reports and engineering drawings.
  • Hearing: Daily able to hear to participate in conversations in person and via teleconference or phone and to hear sounds on production floor including safety warnings or alarms
  • Speaking: Daily able to speak in conversations and meetings, deliver information and participate in communications.
  • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): Daily able to operate most office and personal electronic equipment and infrequently able to use/operate some tools including production tools such as hydraulic lifts.
  • Carrying: Daily able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs.
  • Lifting: Daily able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs.
  • Pushing / Pulling: As necessary able to push and pull small office furniture and some equipment and tools.
  • Sitting: Daily able to sit for long periods of time in meetings, working on computer.
  • Squatting / Kneeling: Frequently able to squat or kneel to retrieve or replace items stored on low shelving.
  • Standing: Frequently able to stand for discussions in offices or on production floor.
  • Travel: Infrequently able to travel independently and at short notice.
  • Walking (include routine walking such as to a shared printer to retrieve documents): Daily able to walk through office and production areas including uneven surfaces.
  • Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site

 
Job Number: 1910109077
Job Location: Grand Prairie, TX
Duration: 24 months
Input Date: 11/18/2019
Last Updated: 01/24/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fVH9QAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Design Engineers - UGNX

Description:
Active secret clearance to start
Bachelor of Science in Mechanical or Aerospace engineering. Experience with NX and TeamCenter.

Email resume to: mmccarthy@pdstech.com
 
Job Number: North-Mech EN - UGNX
Job Location: Melbourne, FL
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Design Engineers - UGNX

Description:
Active secret clearance to start
Bachelor of Science in Mechanical or Aerospace engineering. Experience with NX and TeamCenter.

Email resume to: mmccarthy@pdstech.com
 
Job Number: North-Mech EN - UGNX
Job Location: Melbourne, FL
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/18/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Sr. Principal Engineer Mechanical: Liaison Engineering Electrical 4 - Clearance MD

Description:
166903 Sr. Principal Engineer Mechanical: Liaison Engineering Electrical 4 (Job Number: 19032902)

Number of Openings: 1

Location(s): United States-Maryland-Patuxent River


Shift: 1st Shift

Target Start Date: Feb 3, 2020

Target End Date: Jan 29, 2021

Work week: 4/10 - (12pm - 10:30pm)

Duration: up to 1 year

Location: Pax River, MD

Rate: $62 - $64/hr

Northrop Grumman Aerospace Systems located in Pax River, MD has a contract labor opening for a Sr. Principal Engineer Mechanical: Liaison Engineering Electrical.


Essential Functions:
Liaison/MRB Engineer
· You will be a member of a multi-disciplined team responsible for providing Liaison Engineering support for Triton located at the Northrop Grumman Facility Patuxent River MD
· You will be working with subsystems installations and composite & metallic structures
· You will be performing timely dispositions for nonconforming parts, assemblies, and installations.
· You will be working as part of a Material Review Board (MRB) and Engineering Change Request (ECR) processes.
· You will be working with a team of engineers coordinating with multiple disciplines to determine solutions to problems quickly and efficiently.
· Some of the tools you'll be using are CATIA V5 and TeamCenter.


Basic Qualifications:

•Bachelor’s Degree in STEM (Science, Technology, Engineering and Math) discipline from accredited institution along with 9 years' minimum experience; minimum 7 Years with Masters; 4 Years with PhD.
•Current or previous Material Review Board (MRB) signature authority
•Experience with ECR (Engineering Change Request) process
•Current or previous Liaison Engineering Authority for ECR's
Experience with CATIA V5 and/or TeamCenter
 
Job Number: JK-1823S
Job Location: Patuxent River, MD
Rate: 64/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 12/13/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Mechanical Engineer - Clearance GA

Description:
Sr. Principal Mechanical Engineer (Job Number: 19032956)

Number of Openings: 1

Location(s): United States-Georgia-Warner Robins


Shift: 1st Shift

Target Start Date: Nov 25, 2019

Target End Date: Jun 19, 2020

Pay Rate: $57 to $60/hr

Work Schedule: 9/80

Duration of Assignment: Approx 3 to 6 months


This position is located at Warner Robins Air Force Base, Georgia.
This position supports the existing Government program and engineering teams at RAFB as well as Melbourne, FL. Duties to include the review, assessment and update of aircraft maintenance and structural requirements and technical data for sustainment. Development of bill of materials and repair concepts required to accomplish heavy maintenance is required. Experience in the resolution of aging aircraft issues is preferred. Technical support and advisory of Government counterparts is a primary objective of this position. The demonstrated ability to work closely with Government counterparts is required.

Basic Qualifications:

Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with a minimum of 9 years of experience in design, fabrication or repair of metallic airframe structures.
An active DoD Interim Secret Clearance required to start.


Preferred Qualifications:

BS or MS, Mechanical or Aerospace Engineering
Experience with programmed depot maintenance (PDM) for aging military aircraft
Liaison Engineering Experience.
Excellent verbal and written communication skill
Ability to collaborate in a team environment
Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously
Ability to comprehend and analyze complex problems and develop solutions
Experience with military specs and standards.
Experience interfacing with a military customer
 
Job Number: JK-1815S
Job Location: Warner Robins AFB, GA
Rate: 60/hr max
Per Diem: pd split possible
Duration: 8 months
Input Date: 10/17/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Sr. Principal Supply Chain Planning Specialist

Description:
Work schedule: Flexible, due to travel (1st Shift)

·         Serve as the technical liaison between NGC's Integrated Product Teams and other Global Supply Chain teams
·         Provide daily communication guidance to the Procurement Organization and other IPT organizations regarding supplier base issues and activities 
·         Ensuring proper working processes and procedures are taken place at the supply base in accordance to and in compliance with all other NG requirements Monitor, manage, and provide visibility of supplier manufacturing performance in support of purchase order requirements as required
·         Review master production schedules regularly to determine possible shortages and alert proper team members of potential problems daily
·         Ensure compliance of off-site tooling(s) and manufacturing policies regularly per Sector and Global Business Area requirements
·         Generate weekly progress reports of all supplier critical issues to management along with other matrix required to provide by the organization
·         Support daily/weekly investigation(s), development and implementation of supplier's corrective action measures with respect to non-conforming processes
·         Evaluate supplier's capability(s) when called upon for capacity issues, process control activities and make needed recommendations regarding utilization of the NGC supplier base back to the GSC organization
·         Participate in supplier reviews of technical data packages necessary to ensure constraints resolved to meet requirements
This position requires daily travel from supplier-to-suppliers within as well as the potential to support out-of-state travel when called upon by management or as needed.

 
Qualifications:
Basic Qualifications: 
·         High school diploma or G.E.D
·         9 years of Manufacturing Engineering and/or Global Supply Chain related experience
·         Background in either machining, sheet metal or tooling
·         Ability to understand/ interpret engineering documents/drawings as needed
·         Ability to travel up to 75% including the possibility of out-of-state travel as needed 
·         Required to provide own vehicle with a valid driver's license and insurance
 
Preferred Qualifications:
·         Master's of Science Degree 
·         Strong aerospace manufacturing knowledge including machine shop experience and sheet metal fabrication 
·         Background in composite manufacturing
·         Tooling background
·         Six Sigma Lean background
·         Aerospace Assembly Operations background
·         Exposure to major Programs including F/A-18 , E2  or F-35 Programs
 
Job Number: x20190191
Job Location: Redondo Beach, CA
Rate: $55 - $60/hr
Duration: up to 1 year
Input Date: 11/13/2019
Last Updated: 01/24/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

Stability and Control Engineer

Description:
Summary
As the Senior Stability & Control Engineer you will report to the VP of Flight Sciences and be responsible for providing detailed stability and control analysis and input to the design of the business jet.

On any given day you might:
Independently address stability and control related issues throughout the vehicle design and test process
Develop aerodynamic databases needed for Stability and Control
Identify Stability and Control issues and propose solutions
Support flight control laws group and the development of aircraft flight control laws
Develop requirements for low and high-speed wind tunnel tests
Support S&C wind tunnel tests from planning through execution and final reports
Provide hinge moment data based on CFD and wind tunnel tests
Provide input for control surface sizing, deflection angles, and rates
Contribute to the development of aircraft stability and control requirements that are compatible with civil certification standards (FAR25/CS25)
Provide inputs to developmental and FAA-approved flight manuals including normal handling characteristics and emergency procedures
Support stability and control flight testing

We're looking for someone who has:
A BS in Aeronautics or Aerospace Engineering with more than 6 years of experience (or MS in engineering plus 4 years of experience)
Experience with the latest industry-standard stability and control and aerodynamic design and analysis tools such as MATLAB/SIMULINK and vortex-lattice tools
Experience working with CFD experts to generate data required for stability and control analyses
Prior experience performing trade studies related to stability and control including using numerical tools as well as wind tunnel data
Experience in the creation of aerodynamic stability and control databases
Knowledge of, and experience with, FAA FAR 25 and EASA CS 25 stability and control regulatory requirements and means of compliance
Experience with flight and wind tunnel test monitoring and data reduction to support stability and control analysis and certification efforts
Familiarity in generating documentation to support certification efforts
 
Job Number: 42-036
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 01/17/2020
Last Updated: 01/23/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Circuit Design 5

Description:
Client's employees have incredible opportunities to work on revolutionary systems in air and space thatimpact people’s lives around the world today, and for generations to come. Our work preserves freedom and democracy,and advances human discovery and our understanding of the universe. We look