Job Search Results

229 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/19 Thursday 08:22AM Pacific Time by ContractJobHunter. )

Listings 1 - 229

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
116971 - Manufacturing Engineer I

Description:
*Perform technical studies and conduct analysis of operations.
*Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
*Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
*Author DRDI/DMT rework instructions to support effective corrective actions.
*Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
*Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
*Perform productivity studies from engineering drawings.
*Apply statistical methods to estimate future manufacturing requirements and potential
*Incorporate Lean Manufacturing Methodology into existing and future processes.

Requirements
*Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
*Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
*Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
*Lean Specialist certification or higher preferred.
 
Job Number: 126755
Job Location: Savannah, GA
Input Date: 10/24/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
Role: CNC Machinist
Location: Hawthorne, CA 90250
Duration: 10+ Months Contract
Shift timings: 2nd Shift

Responsibilities: CNC / Conventional machinist
• CNC Machine precision fixtures, tools and product from drawings, in accordance with established procedures, with limited supervision.
• Plans machining by studying work orders, blueprints, engineering plans ability to import and export CAD files, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).
• CNC Programs mills and/or lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.
• Conventional sets-up mills and/or lathes by installing and adjusting vices, three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers, tramming heads, fixturing and workholding as required, including adding features for holding if necessary for particular part geometry.
• Verifies settings by measuring positions, first-run part, and sample workpieces;
• Maintains specifications by observing milling, drilling, grooving, and cutting, facing, tapping and pocketing operations; taking measurements; detecting malfunctions; troubleshooting processes;
• Maintain cutting tools and makes necessary adjustments in machine control to meet part specifications.
• Maintains safe operations by adhering to safety procedures and regulations.
• Review preventive maintenance log to ensure requirements are up to date; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
• Maintains continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs.
• Documents pertinent actions using WO system features.
• Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Basic Qualifications:
• Minimum 10 years of CNC machining experience, both Mill and Lathe.
• At least 2 years in a lead position.
• Experience working with MasterCAM and Vericut.

Preferred Skills and Experience:
• Associates or bachelor’s degree in a relevant area.
• Safety training and/or certifications.
• Demonstrated experience leading a team in a tool manufacturing environment.

Additional Requirements:
• May require long hours and weekend work as needed.
• Some travel may be required.
• Repetitive assembly operations may be required, such as: grasping, standing, lifting, bending, pulling, stooping, stretching, and carrying (loads up to 25lbs.).
 
Job Number: 52477
Job Location: Hawthorne, CA
Rate: open
Per Diem: possible
Overtime: Possible
Duration: 10+ months contract
Start Date: ASAP
Input Date: 10/10/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chassis Packaging Support – NX CAD

Description:
Job Title: Chassis Packaging Support – NX-CAD
Location: Portland, OR
Duration: 12 Months
Create and Maintain chassis packaging and arrangement for our client that is supporting a heavy truck manufacturer in Portland Oregon.
 Works with client that is the Original Equipment Manufacture OEM of suspensions and other components the engineer and develop for Oregon base truck manufacturer.
 Works with OEM and the truck manufacture in making sure that the current components of NX 3D models are up to date in the database.
 Will be downloading NX 3D Cad models and importing them.

Skill Requirements:
 Must have solid NX CAD capabilities to move and save parts, sub-assemblies and assemblies in the correct configurations and arrangements for clearance studies and other needs truck manufacturer may need. There is no engineering or design involved but the parts need to be correctly located in 3D space to verify wheel, chassis and packaging clearance studies and so on.
 
Job Number: 3923-PS
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Designer I

Description:
Completions Designer I

Location: Savannah, GA
Pay Rate: ($27/hr - $35/hr)
Duration: Long Term Contract
Shift: 4x10

Unique Skills:
High proficiency in AutoCAD required. High level of customer communication skills required. SharePoint proficiency strongly desired.

Education and Experience Requirements:
Bachelor's Degree Drafting, Design Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Proficient in operating CAD equipment.

Position Purpose:
Create design drawings for manufacturing of aircraft parts, assemblies, and installations working from customer specifications and instructions. Ensure that activities are in line with internal/external customers, FAA requirements, and Company processes to achieve department objectives.

Principle Duties and Responsibilities/Essential Functions:
1. Conduct research for information on existing drawings, hardware, vendor parts, etc. relating to job task.
2. Evaluate customer requirements and provides recommendations related to the design.
3. Identify problems and provides solutions to designs.
4. Coordinate design work with other departments, engineers, and designers as required in order to complete in a timely manner.

Additional Functions:
1. Enforce safety rules and procedures.
2. Ensure application of all Company regulations and policies. Perform other duties as assigned.
 
Job Number: 8000
Job Location: Savannah, GA
Rate: 27-35
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/02/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Manufacturing Engineer - Aerospace and Defense

Description:
San Diego, CA



Several Composite Manufacturing Engineer positions are needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Devise new approaches to resolve unusual or highly complex manufacturing problems through early, upfront design-for-manufacturing (DFM) principles to ensure producibility, inspectability, testability, maintainability and repairability.

Define and implement new manufacturing technologies.

Provides input to design, technical staff, briefs management, and participates effectively in a team of experienced professional staff.

Develop composite manufacturing processes, procedures and tooling using technical experience and collaborative interaction with the team to improve quality, eliminate non-value-added steps and shorten lead times.

Initiate and implement Lean and Six Sigma Projects to improve quality, lower costs, and remove tribal knowledge.

Oversee prototype and pilot builds, document the build process with standardized work instructions, develop shop aids and routers

Lead PFMEAs


Software Requirements:

Experience with CAD, Siemens NX (Unigraphics)/FiberSIM, PLM
Experience with MasterCam and Vericut


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Must have an extensive working knowledge of advanced composites production operations
Must have experience with composite lamination and composite assembly operations
Familiar with laser projector systems
Hands-on experience with Fibersim
Experience with CNC Machining tools


Required Education: Bachelor's degree is required.



Position: Contract to Hire or Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95013
Job Location: San Diego, CA
Rate: 45-50/hr
Per Diem: yes
Overtime: yes
Duration: lt
Start Date: asap
Input Date: 10/06/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Eng II

Description:
Unique Skills:

Prefer Experience with Engineering Change Board of Systems components

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Languages Required (in addition to English): English
 
Job Number: 117487
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Eng II

Description:
Unique Skills:

Experience with Catia V5, SAP, and Solumina preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 117244
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Engineer I

Description:
Unique Skills:

Experience in SAP/Solumina preferred


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 116971
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: Kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV CA

Description:
160469/7457002

Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
Canoga Park, CA
60/hr max

Duties:

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE
Additional Skills:
PACKAGING ENGINEERING
HARNESS CABLING

# of Positions: 5

Location:
Canoga Park, CA


Schedule:
Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457002
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/09/2017
Last Updated: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Designer III/IV

Description:
Under limited general direction and following established procedures in accordance with contractual requirements and policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.
Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: CA39225
Job Location: Canoga Park, CA
Rate: up to $60.00
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: Nov 2017
Input Date: 10/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Karen Wilkes
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Must have secret clearance

Work with designers to ensure the design meets all requirements, including Safety of Flight.

Experience with all aspects of mechanical design, including layout, documentation and checking per IAW ASME Y14.24 and be familiar with MIL-T-3100 and MIL-STD-100. 5 to 10 years experience of creating Pro-E / CATIA drawings and drawing release. Proficiency with said CAD skills is required.
 
Job Number: 40415
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/21/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer
 
Location: Plymouth, MI
Duration: 12 months
 
Description:
Client is a global leader in automotive seating. With 75,000 employees operating in 230 manufacturing/assembly plants in 33 countries worldwide, we produce and deliver automotive seating for all vehicle classes and all major OEMs. From complete seating systems to individual components, our expertise spans every step of the automotive seat-making process. Our integrated, in-house skills allow us to take our products from research and design all the way to engineering and manufacturing – and into more than 25 million cars every year.
 
Overview:
An engineer in product design with good communication skills to work on vehicle Seat Metals and Mechanisms. The engineer will be responsible for designing seat mechanisms and structures for the program and/or product and must demonstrate the ability to plan, organize and deliver engineering program
 
Core Responsibilities:
- Executing robust designs, manufacturing feasibility, high quality on drawing releases, prototype parts and production parts.
-  Help solve design issues by utilizing the Basic Engineering Process (BEP) process and his knowledge of lean engineering. Complete A3's which were presented in weekly and executive design reviews for these issues.
-  Help prepare documentation and gather data for engineering xSO signoff. Exposure to the product development process and interact with Subject Matter Technical Experts (SMTEs) throughout the assignment.
-  Support issue resolution and on-time execution for DV & PV testing phases by coordinating test timing, seat builds, and teardowns. This exposure allows for acquisition of knowledge in seat regulations, strength, durability, and tactical planning.
-  Support customer and DV/PV test builds here in Plymouth. Exposure to Design For Assembly and Manufacturing (DFAM) principles. Gain understanding of the interaction between design and manufacturing in product development and key cost drivers.
-  Acquire knowledge in Design for Cost to evaluate various engineering design changes in CAD while at the same time understanding the cost impact of those changes. This enables the team to assess the impact of changes in the ideation phase while still understanding a high level cost impact of those changes.
 
Additional Responsibilities:
-  Balancing multiple requirements from differing internal functional groups, Subject matter Experts and the customer to find optimized technical solutions to meet objectives such: as costs, performance, timing and launch.
 
Basic Qualifications:
-  Completed a 4 year B.S. degree in Mechanical or Electrical Engineering (not looking for recent Master's graduates).
-  CAD experience – Proficient in CATIA v5 with 5 years' minimum experience.
-  The engineer needs to have good analytical skills and work effectively with customers / suppliers and the development team.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-16587
Job Location: Plymouth, MI
Input Date: 09/25/2017
Last Updated: 10/02/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **

** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
•Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent. MS degree is desired.
 
Job Number: 8029
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/04/2017
Last Updated: 01/16/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred**

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T.
- Higher level certifications are preferred.
- Windchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent.
- MS degree is desired.
 
Job Number: 8028
Job Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 10/09/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Seeking a Design Engineer - Level 4 for an opening in Canoga Park, CA

RESPONSIBILITIES:
Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost. Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware. Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines. Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware. Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

REQUIREMENTS
Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.
10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

EDUCATION
BS degree in an Engineering field or equivalent. MS degree is desired.

WORK SCHEDULE
5/40, 1st shift. Must be ok with some OT.
 
Job Number: 165618
Job Location: Canoga Park, CA
Duration: 10 Months
Start Date: ASAP
Input Date: 10/05/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II / Creo and GD&T Windchill CA

Description:
7457180
Job Title: Design Engineer II

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.

Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills: -Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.

Education: -BS degree in Engineering or equivalent. MS degree is desired.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE DESIGN

# of Positions: 2

Location:
Canoga Park, CA

Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457180
Job Location: Canoga Park, CA
Rate: 40/hr max
Duration: 6 month contract
Input Date: 10/12/2017
Last Updated: 11/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer IV - Creo

Description:
Duties:

Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities:

Conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements.
Conduct trade studies and develop schedules, test plans, component specifications and procedures.
Skills:

Candidates must have significant experience with Creo & GD&T.
Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:

BS degree in an Engineering field or equivalent. MS degree is desired.

KEY SKILLS:

Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.
10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems
Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred
 
Job Number: 377107
Job Location: SEATTLE, WA
Duration: 10 months
Start Date: asap
Input Date: 10/06/2017
Last Updated: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 2

Description:
Location: Canoga Park, CA
Rate: $35.00 - $40.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.
•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design Development and testing of valves, actuators and associated hardware
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
-Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
-Engineers also required to analyze and verify product design and performance for adequacy and reliability.
-Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
-Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
-Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
-BS degree in Engineering or equivalent. MS degree is desired.
 
Job Number: 8032
Job Location: Canoga Park, CA
Rate: $35.00 - $40.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/07/2017
Last Updated: 11/10/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Development Engineer - Liquid Fuel Engines

Description:
Job Title: Design and Development Engineer - Liquid Fuel Engines
Location: Canoga Park, CA
Contact Duration: 6+ months
Pay Rate: $40/hr

Special Requirements

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Design and Development Engineer

Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.
Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain valve layouts, designs/CAD models,and drawings using Creo2 graphicssystem for liquid engine hardware.
Activities:

Conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration,fabrication process identification, synthesis of higher level reqmts to component level reqmts.
Conduct trade studies and develop schedules, test plans, component specifications and procedures.
Skills:

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:

BS degree in Engineering or equivalent. MS degree is desired.
 
Job Number: 377118
Job Location: Canoga Park, CA
Rate: $40 / hour
Per Diem: No
Overtime: Yes
Duration: 6+ months
Start Date: ASAP
Input Date: 10/06/2017
Last Updated: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.
MUST HAVE SHIPYARD EXPERIENCE
 
Job Number: 400
Job Location: Avondale, LA
Rate: hourly
Per Diem: possible
Overtime: Possible
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/09/2017
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Dalia
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 251/287-2949
Website: www.nationwideskilledtrades.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Bachelor's Degree Drafting, Design Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Proficient in operating CAD equipment. Create design drawings for manufacturing of aircraft parts, assemblies, and installations working from customer specifications and instructions. Ensure that activities are in line with internal/external customers, FAA requirements, and company processes to achieve department objectives. High proficiency in AutoCAD required. High level of customer communication skills required. SharePoint proficiency strongly desired.
CHECK OUT ALL CURRENT OPENINGS
POSTED AT www.hi-tecsolutions.com/jobs
 
Job Number: 116269
Job Location: Savannah, GA
Rate: 27-35
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 10/16/2017
Last Updated: 10/25/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Associates Degree or other 2 year technical degree in related discipline and 1 year of related experience. Job Description: Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or Ship Constructor. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments. Successful candidate will possess an extensive knowledge in specialized functions and a wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered. Successful candidate will be able to work with minimal supervision. Work may be done without established procedures. May assist in orienting, training, assigning and checking the work of lower level employees and will often be designated as lead worker. Typical duties and tasks are varied and complex. Serves as a resource to others in the resolution of problems and issues. Contacts are frequent with individuals representing outside organizations, and/or individuals of significant importance within the company. Contacts involve planning and preparation of the communications, require skill, tact, persuasion and/or negotiation to accomplish the objectives of the communication. Specific duties for Fleet Sustainment Engineering include but are not limited to the development and implementation of Ship Change Documents (SCDs), initiation, development, and review of technical drawings, processing of change paper, supporting technical analyses of mechanical systems, supporting preparation of special studies, and cognizance of specific marine systems and ship alterations.
 
Job Number: 21
Job Location: Mobile, AL
Rate: Hourly
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/15/2017
Last Updated: 10/09/2017
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Dalia
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 251/287-2949
Website: www.nationwideskilledtrades.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electerical Engineer

Description:
Basic Qualifications:

Bachelor's of Electrical Engineering with 2 years of engineering experience, Master's of Electrical Engineering with no prior experience, or similar degree background.
Previous Shipbuilding experience is highly desired.
Proficient in Microsoft Office applications and Auto CAD 2014
Preferred to have some experience determining the size of electrical cables, panels, circuit breakers, transformers, switches, rectifiers, frequency changers, switchboards and other components comprising a Power distribution system. Familiar with electricial lighting distribution systems. control systems, and C4ISR systems is a plus.
 
Job Number: 15
Job Location: Pascagoula, MS
Rate: hourly
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 10/09/2017
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Dalia
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 251/287-2949
Website: www.nationwideskilledtrades.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Design Engineer

Description:
Seeking an Engine System Design Engineer based of Canoga park, CA.

Duties:
%u2022 Performs engine system level design tasks for liquid rocket engines.
%u2022 Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
%u2022 Additional duties may include in-house/vendor fabrication and test support as needed.
Skills:
%u2022 CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
%u2022 Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.
Education:
%u2022 Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 377111
Job Location: Los Angeles
Per Diem: NO
Overtime: YES
Duration: 12 mon.
Start Date: ASAP
Input Date: 10/05/2017
Last Updated: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Rashmi Bhalla
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer SolidWorks

Description:
Job Title: Engineer SolidWorks
Location: Grandville, MI. 49418
Duration: 2+ Months ( Can go Longer)
Job Details

We're seeking a Mechanical Engineer that knows how to use SolidWorks in developing Compressors, Mirrors, Horns and possibly some interior plastic components too.
• This position is working on a new program and have an immediate need for a SolidWorks CAD/Design person that is well versed in SolidWorks and have experience in FEA analysis, bills of material, project timing and design of mechanical parts.
 
Job Number: 3475
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 2+ Months ( Can go Longer)
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Project/Design Engineer

Description:
Seeking a Sr. TCO Engineer in Milwaukee, WI.

Job Description:
As a Senior TCO Engineer, reporting to the FLC Engineering Director, you will lead cross-functional project teams in Mortara to complete design engineering and/or supply chain consolidation projects from planning through implementation. You will also perform mechanical engineering activities related to your projects.

Responsibilities:
o Project Scoping & Planning
o General Project Management (forming project teams, budgeting, assigning & tracking
tasks, identify & mitigating project risks, etc.)
o Update mechanical CAD drawings using Pro-E
o Review of Design Inputs and Outputs
o Evaluating and Applying Regulatory Standards
o Lean and Continuous Improvement Initiatives
o Manage one engineer
o Performs other duties as requested
Requirements:
o 5-10 years of applied project management experience
o Experience as a team lead managing multiple projects and coordinating activities (schedules, resource, budgets, etc.) between multiple project managers, preferred.
o The ability to analyze, modify and create mechanical designs is a plus
o Applied experience with Microsoft Project as well as other Office Suite applications
o Prior SAP experience preferred (including DIRs, BOMs, MMDS, and Engineering Changes)
o Demonstrated ability to communicate and negotiate with a diverse group of cross-functional stakeholders in Marketing, R&D, QA, Regulatory, Sourcing, and Operations.
o Well-versed in Medical Device Design Controls.
o Strong communication skills and attention to details
o Ability to lead and coach other team members in the spirit of cross functionality
Education:
o Bachelor's degree in Engineering\
Schedule:
Must be available to work any shift.
 
Job Number: 164867
Job Location: Milwaukee, WI
Rate: $52.94
Duration: 6 Months
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Location: Canoga Park, California

Terms: Long Term Contract Employment

Candidates must be U.S. Citizens
US Passport Required

Duties: 

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling. 

Skills: 

Designing and planning of layout component fabrication
Assembly and material handling
Planning of sequence of operations and specification procedures. 
The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process. 

Desired Skills: 
Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) 
Manufacturing fabrication and assembly processes and systems
Verbal and written communication. 
Project management skills and MS Office applications ( Word, Excel). 

Education: 
BS degree in Manufacturing /Industrial Technology or Engineering required


Keywords: Manufacturing Engineer, Delmia, Maestro, Windchill, Propulsion  
 
Job Number: 376912
Job Location: Canoga Park, CA
Rate: 48.00
Per Diem: No
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 10/09/2017
Last Updated: 10/10/2017
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2nd Shift) (Fibersim) CA

Description:
Job ID# 13954
Title TEMP Manufacturing Engineer (2nd Shift) (Fibersim)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We currently have an exciting opportunity for a TEMP 2nd Shift Manufacturing Engineer with our ASI Division.

Experience
•Proficient with CAD (Creo and/or Pro E) and Siemens NX/FiberSIM PLM software
•Working knowledge of composite part design and fabrication methods
•BS in Mechanical Engineering, Composites Engineering or comparable work experience
•Experience working in commercial and/or military aircraft manufacturing environments
•Familiar with composite lamination drawings and process specifications
•Previous hand layup experience with prepreg material is a plus

Job Tasks
•Perform detailed review of composite part CAD model and lamination drawing (solid and honeycomb panel designs)
•Generate surface geometry representing tool and honeycomb core layers, generate boundary curve geometry for individual plies from the applicable CAD models and drawings
•Utilize Siemens NX and FiberSIM PLM software package to produce a composite manufacturing solution for complex parts that abide to engineering process specifications
•Generate Flat Pattern and Laser Projection files using FiberSIM
•Create Powerpoint PlyBook files from Flat Patterns, for use by the Manufacturing Engineering group in lamination work instructions
•Provide support to manufacturing engineering on shop floor when needed

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Temp Assignment Duration (# of Days) 240
 
Job Number: JE-13954
Job Location: San Diego, CA
Duration: 8 months
Input Date: 10/06/2017
Last Updated: 10/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (Cable Assembly) CA

Description:
Job ID# 13703
Title TEMP Manufacturing Engineer (Cable Assembly)

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

This position will support the design (DFM), first article, production, test, and system integration of wire harness and cable assemblies for all UAV platforms including Ground Control Stations (GCS). Cable designs predominately incorporate Mil Spec and commercial components and wires; shielded and unshielded single/multi-conductor wires; RF connectors and cables; sensors and other devices.

DUTIES AND RESPONSIBILITIES:•Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design harness board and shop aid tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.

Qualifications Essential Qualifications Typically requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education. Must have a general understanding of engineering concepts, principles, and theory with technical experience demonstrating the application of those concepts while ensuring safety and regulatory compliance. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer, documentation, presentation, and interpersonal skills are required, as well as the ability to work both independently and as part of a team. Must be able to work extended hours as required. An EIT (Engineer in Training) certificate is desirable.
Additional Qualifications •Requires a bachelors or masters degree in engineering or a related technical discipline from an accredited institution and two or more years of engineering experience with a bachelors degree.
•Expertise in assembly methods and processes, including wire cutting, stripping, splicing, and soldering; contact/terminal crimping; marking; and heat shrinking is desirable.
•Experience with molding/potting and shielding is desirable.
•Experience with electrical testing including Continuity, Insulation Resistance, and Dielectric Withstanding Voltage testing, as well as related equipment, including wiring analyzers and network analyzers is desirable.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences.
•Proficient with Microsoft Office Word and Excel.
•Experience with Outlook and Power Point. Ability to use CAD programs for tooling design is desirable.
Additional Preferred/Desirable Qualifications
•Experience with IPC & MIL standards, including: IPC/WHMA-A-620 – Requirements and Acceptance for Cable and Wire Harness Assemblies, J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029) – Electrical Connector Contacts, MIL-DTL-38999 – Circular Electrical Connectors, SAE-AS50881 (MIL-W-5088) – Wiring Aerospace Vehicle, NAVAIR 01-1A-505-1 – Aircraft Electric and Electronic Wiring, Technical Manual. Knowledge of electrical bonding; EMI shielding and filtering techniques; RF testing methods, e.g. VSWR. Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13703
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 10/06/2017
Last Updated: 10/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 2nd Shift - Aerospace and Defense

Description:
San Diego, CA



A Manufacturing Engineer 2nd Shift is needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



Responsibilities will include but not be limited to:



Perform detailed review of composite part CAD model and lamination drawing (solid and honeycomb panel designs)

Generate surface geometry representing tool and honeycomb core layers, generate boundary curve geometry for individual plies from the applicable CAD models and drawings

Utilize Siemens NX and FiberSIM PLM software package to produce a composite manufacturing solution for complex parts that adheres to engineering process specifications

Generate Flat Pattern and Laser Projection files using FiberSIM

Create Powerpoint PlyBook files from Flat Patterns, for use by the Manufacturing Engineering group in lamination work instructions

Provide support to manufacturing engineering on shop floor when needed



Software Requirements:

Experience with CAD, Siemens NX (Unigraphics)/FiberSIM, PLM is required


Required Experience:

5 to 15 Years experience in aerospace composite manufacturing, processing and materials knowledge.
Proficient with CAD (Creo and/or Pro E) and Siemens NX/FiberSIM PLM software
Working knowledge of composite part design and fabrication methods
Experience working in commercial and/or military aircraft manufacturing environments
Familiar with composite lamination drawings and process specifications
Previous hand layup experience with prepreg material is a plus


Required Education: Bachelor's degree is required.



Position: 2nd Shift, Contract to Hire or Direct Hire



Location: San Diego, CA



Employment Criteria : This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Citizen, who does not work for a foreign company/foreign government/foreign governmental agency or organization, and is in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 95012
Job Location: San Diego, CA
Rate: 45-50/hr
Per Diem: yes
Overtime: yes
Duration: lt
Start Date: asap
Input Date: 10/06/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I

Location: Savannah, GA
Rate: $35-40/HR
Duration: Long Term Contract



Unique Skills:
Experience in SAP/Solumina preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
Languages Required (in addition to English): None
 
Job Number: 8040
Job Location: Savannah, GA
Rate: $35-40/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7511
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 06/08/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Required: SAP - Catia - Solumina

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7515
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR (DOE)
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-There are two (2) Level II openings and two (2) Level III openings.

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills: Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) . -Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).

Keywords:
-Manufacturing Engineer
-Delmia Maestro
-Windchill
-Propulsion components

Keywords:
Education: BS degree in Manufacturing /Industrial Technology or Engineering

required Skills and Experience:

Required Skills:
MANUFACTURING ENGINEER
AEROSPACE

# of Positions: 4

Location:
Canoga Park, CA

Start Date: 10/23/2017
Estimated End Date: 04/22/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 10/04/2017
Last Updated: 10/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Seeking a Mechanical Design Engineer in Ayer, MA.

Essential Duties and Responsibilities:
Design prototype products including special molds, jigs and fixtures necessary for shop production and Quality Assurance inspection.
Design composite and aluminum space frame shell structures using Autocad and/or Solid Works Perform structural (finite element) analyses geometry using custom software.
Generate detailed geometry designs for radomes.
Prepare cost estimates and participate in design reviews.
Provide technical assistance, as required, to other departments including Marketing and Manufacturing.
Assist in the preparation of manufacturing process specifications, test procedures and installation manuals.
Evaluate new products, materials, manufacturing processes and vendor Capability, and recommend substitutions to minimize inventory.
Perform continual value engineering to improve products.
Continually evaluate product integrity.
Submit reports to management, as required.
Coordinate Department requirements for WDS System with MIS.
Review contract specifications and work authorizations to ensure compliance.
Prepare program schedules and software items required on a contract.
Review customer radome/antenna interface.
Provide technical inputs to drafting.
Review drawings prior to release.
Evaluate purchase requisitions, as specified Ensure that all documentation is complete and thorough Act as liaison with Manufacturing and Materials to minimize inventory.
Performs other duties as requested by the Product Line Manager.


Education/Experience/Licenses etc.:
Education and / or Experience:
Bachelors degree in Mechanical Engineering, Mechanical Design or related field required. Masters degree highly desirable.
Five Years minimum mechanical design experience required. Direct radome and reflector related design experience preferred.
Experience designing and analyzing ground-based composite and metal space frame radomes. Experience designing and analyzing shipboard and airborne radomes highly desirable.
Experience designing and analyzing precision reflectors is needed.
Experience designing, inspecting and profiling composite molds is essential.
Experience with composite materials, resins and determining cure cycles is essential.
Extensive experience with Solidworks or Inventor, AutoCAD and Autodesk Vault or PDM Works. Experience with large and complex CAD models is required. Preference given to Inventor modeling experience.
Experience in structural analysis and Finite Element Analysis (FEA) is needed. Experience conducting Computational Fluid Dynamics (CFD) analysis highly desirable.
Must have a firm grasp of documents and revision control. Experience with Autodesk Vault preferred.
Excellent computer skills, particularly understanding of Window interface, navigating a network, file organization, making back-ups, email literacy, Excel and spreadsheet literacy.
Understanding of Materials Requirement Planning (MRP) systems required. Understanding of Visual operating system highly desirable.
 
Job Number: 165569
Job Location: Ayer, MA
Rate: $28.00
Duration: 12 Months, CTH
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Denver/Centennial, CO
Pay Rate: DOE, exempt OT
Duration: 1 year W2 contract
**MUST be a U.S. CITIZEN**

Description:
• Bachelor's degree or higher
• Mechanical Design Engineer to support production tooling design
• 10+ years experience
• Proficient in CAD modeling and drawing creation – NX version 10
• Develops system, mechanism and component model designs and drawings
• Proficient with structural designs and mechanisms
• Capability to perform system integration and system level trade studies to optimize designs for manufacturing, production and performance
• Knowledge of machine shop practices, capabilities and limitations
• Knowledge of assembly and material handling
• Familiar with welding processes
• Knowledge of TeamCenter is a plus
 
Job Number: 7997
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Decatur, AL
Pay Rate: DOE
Duration: 1 year W2 contract
**MUST be a U.S. CITIZEN**

Description:
• Bachelor's degree or higher
• Mechanical Design Engineer to support production tooling design
• 10+ years experience
• Proficient in CAD modeling and drawing creation – NX version 10
• Develops system, mechanism and component model designs and drawings
• Proficient with structural designs and mechanisms
• Capability to perform system integration and system level trade studies to optimize designs for manufacturing, production and performance
• Knowledge of machine shop practices, capabilities and limitations
• Knowledge of assembly and material handling
• Familiar with welding processes
• Knowledge of TeamCenter is a plus
 
Job Number: 7973
Job Location: Decatur, AL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Selected candidate will perform all Liaison duties for the program.
- Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. - Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- CAD expertise per job description (Windchill, CREO and Catia).
- Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.
 
Job Number: 7844
Job Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/05/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer II - CA

Description:
Basic Qualifications:
• Bachelors’ degree in Mechanical Engineering, Physics, Material Science or related field + 2 years relevant experience
• Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
o Use of block part libraries
o Generation of multilayer drawing packages, detailed assembly views, and schematics
• Demonstrated working knowledge of basic GD&T principles
• Sound working knowledge of Finite Element Analysis techniques and basic thermal analysis, preferably using Inventor Pro Suite Analysis package (including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
• Background in tooling design a plus


Essential Job Functions:
Design solar panels and solar panel components in AutoCAD / Inventor Pro Suite. Also design and update searchlight and advanced illumination assemblies in AutoCAD / Inventor Pro Suite as required.
Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others. Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
Work with Illuminations Engineers to generate and update part and assembly documentation needed for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and model management in VAULT.
Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective. Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT principles to all generated and reviewed designs.
Provide support to tooling design team on an as needed basis.
Use Finite Element Analysis to support new design development and Root Cause investigations.

Knowledge Desired:
Candidate must be proficient and efficient in use of AutoCAD / Inventor Pro Suite 11 (or higher) in both 2D and 3D and have a sound working knowledge of basic GD&T principles.

Candidate must also have prior knowledge and experience in generating and running finite element analysis, preferably using Analysis package in AutoCAD / Inventor Pro Suite.

Ability to compile and present data using excel and powerpoint, and to generate/update procedural documentation using MS Word, a strong foundation in mechanical engineering and/or material science, as well as familiarity with basic physics of solar cells, Aerospace materials, and assembly techniques, PCBs and electronics are all considered as pluses.
Essential Physical/Mental Requirements:
Candidate must be highly adaptable to meet changing priorities in support of manufacturing, engineering, and marketing needs. Must have good people skills and be able to communicate effectively with a diverse group of both internal and external customers and colleagues.
Must be willing to embrace change and learn new skill sets as needed in order optimize processes and procedures and address balancing workloads in a dynamic market environment.
Special Requirements:
The ideal candidate should be flexible, able to support evening and weekend work on an as needed basis, and self-motivated. Must be adept at working in a fast paced environment to complete scheduled milestones as planned.

Bachelors degree in Mechanical Engineering, Material Science, Physics, or related field + 2 years relevant experience (or equivalent certification) in Computer Aided Design.

Experience Desired:
Must be proficient in:
• reading/generating electrical schematics
• quickly generating 2 and 3 D models using block part libraries
• use of multi-layer drawing structure
• generating assembly detail views

The ideal candidate must also have a demonstrated working knowledge of basic GD&T principles for evaluating manufacturing tolerances and dimensional stack-ups, and have prior experience in generating/running finite element analysis models. Prior experience in use of Autodesk VAULT is highly desired.

Experience in packaging design and/or wiring assembly is also desirable.
 
Job Number: MechEngIICA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 11/03/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician - AutoCAD

Description:
PURPOSE OF POSITION:
A. Supervise and provide direction to contract engineering techs, internal maintenance, and outside contract trades during all aspects of equipment installation and conversion such as demolition, construction, installation, testing, and debug of production equipment.
B. Perform troubleshooting, process start-up, design, and documentation of Mechanical and Electrical Systems for new or modified production equipment.
C. Create and modify existing documentation to complete drawing packages, installation checklists, machine part lists, illustrations, and machine specs of production equipment.
D. Provide direction to technicians to create and modify existing documentation to complete drawing packages, installation checklists, machine part lists, illustrations, and machine specs of production equipment.
E. Provide mechanical equipment designs and layouts which meet Machine Drafting Standards on CAD based formats. (AutoCAD® 2014, Inventor 2014)

MAJOR RESPONSIBILITIES:
A. Develop mechanical and electrical installation checklists and schedules. Oversee, as appropriate, the usage of these systems.
B. Procure and expedite materials for new or modified equipment.
C. Specify or recommend vendors, and maintain close liaison between vendor and plant.
D. Re-design mechanical components to reduce installation cost, solve equipment interferences, and correct inadequate designs.
E. Prepare work orders and direct maintenance personnel and outside contract trades in the fabrication, assembly, testing, and installation of equipment.
F. Create, review, and update installation documentation and drawings as required.
G. Direct initial equipment set-up and debug up to the point of turnover to operations.
H. Interface with all departments, as necessary, to ensure efficient use and operation of equipment.
I. Redline existing drawings and follow-up with drafting services or oversee draftsmen as required to resolve design issues.
J. Provide third-level troubleshooting support, directing contract engineering techs, and trades as necessary to replace defective components and execute changes in design solve equipment/process issues.

Project Tasks:
A. Provide troubleshooting support in assigned areas.
B. Take personal responsibility for all aspects of supervising equipment installation crews including direction and shift supervision as needed for Electricians and Mechanics during installation activities.
C. Provide training to contract engineering techs, internal maintenance, and outside contract trades on new equipment installation procedures as required for successful execution of installation activities.
D. Analyze and correct equipment installation practices to improve efficiencies, specifically directed toward enhancing installation schedules.
E. Develop cost reduction plans for the improvement of installation projects.
F. Provide sketches or marked-up drawings as dictated by project and evolutionary equipment needs.
G. Complete documentation packages to meet customer requirements.
H. Ensure updated documentation exists in assigned areas.

(Hours will vary with no guarantee of OT, but 10-25hrs per week is not uncommon and expected at times)

Education required:
AAS Mechanical Engineering Technology, BS Mechanical Engineering Technology or BS Mechanical Engineering (Equivalent work experience may be considered in rare circumstances.)

Experience required:
Minimum 5 to 10 years experience

Equipment or software experience preferred:
AutoCAD® 2014, Inventor 2014, Windows7, MS Office suite including Power Point, Excel, Word,
PC based systems, Pneumatic systems and schematics, Motion Control systems, Automated equipment systems experience

Equipment Used:
A. Personal Computers
B. Fluke Meters
C. Precision bubble levels, Digital Inclinometer, Laser level positioning devices
D. Equipment used for machine Installation activities: man lifts, jacks, dollies, trucks, fork lifts, hand tools, etc.
E. Electronic calibration equipment
F. Precision flow measurement devices
G. Programmable Controllers

Personnel Directed By This Position:
Supervise and provide direction to contract engineering techs, internal maintenance, and outside contract trades during scheduled shifts.

Skill or work style preferred:
A. Ability to work well with varied job requirements.
B. Ability to work well with people essential.
C. Presentation skills highly desirable.
D. Well organized.
E. Ability to handle multiple priorities.
F. Results oriented.


Unique or special requirements:
A. Strong practical hands-on mechanical aptitude (All positions require time on the floor working on equipment)
B. Electro-mechanical troubleshooting ability, proficient with pneumatic and electrical schematics
C. Process variable understanding: flow, temperature, rate, pressure, level.
D. Thorough understanding of mechanical drive trains, electrical and pneumatic actuators.

Willingness to travel internationally is preferred, but not required for immediate project.

Initial project in Wilmington. Subsequent projects may be in other NC locations as well as international. Work on an international team is not guaranteed and specific locations will not be disclosed at this point. However, international locations will vary and may include but are not limited to Europe and Asia.
 
Job Number: 17-42874
Job Location: Wilmington, NC
Rate: $25.00 to 37.00 per hour
Per Diem: No
Overtime: Yes
Duration: 10+ months
Start Date: ASAP
Input Date: 09/28/2017
Firm Name: NESCO RESOURCE
Attention: Anthony Kees
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX 3D Wire Harness Routing

Description:
Job Title: NX 3D Wire Harness Routing
Location: Portland, OR 97217
Duration: 12+ Months

JOB FUNCTIONS
• Design and develop vehicle components and systems using Siemens NX CAD..
• Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
• Create and maintain detailed part and assembly drawings.
• Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
• Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
• Apply Client and industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS
• Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
• Siemens NX CAD experience preferred.
• CHS Capital Harness experience preferred.
• Previous electrical and electronics packaging experience preferred.
• A general knowledge of automotive systems preferred.
• Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 3312
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Design Engineers for AZ, MD and CT

Description:
NX Design Engineers for AZ, MD and CT
12 months plus CONTRACT
US CITIZEN REQUIRED

JOB DESCRIPTION:
Need many strong Designers who will create models and engineering drawings utilizing Unigraphics NX 9.0 and Teamcenter.
Experienced in reviewing drawing/design packages for proper content and to ensure compliance with applicable industry and military standards.

Top three skills:
• A Bachelor’s Degree (BA/BS) in Engineering or an Associate’s Degree in CAD/Drafting/Design/Computer Aided Drafting program and 3-5 years’ experience.
• Knowledge of Unigraphics NX 9.0 and Teamcenter.
• Experienced with geometric dimensioning and tolerancing per ASME Y14.5

Rate flexibility: (Y/N): Yes
Straight Contract or Contract to hire: Straight Contract

Role Description & Responsibilities:
The Designer will create models and engineering drawings utilizing Unigraphics NX 9.0 and Teamcenter.
Will also be responsible for checking drawing/design packages for proper content and to ensure compliance with applicable industry and military standards.
Duties will include checking designs for fit, function, manufacturability, and economy of fabrication and be able to perform tolerance analysis.
Responsibility will further include liaison with Engineering, Manufacturing, quality, and Materials.
Some vendor liaison will be required as well.

Experience Requirements:
• Candidate must have a minimum of 3-5 years of related experience.
• Must be a U.S. Citizen
• Must be a graduate of a CAD/Drafting/Design/Computer Aided program
• Must be experienced with Unigraphics NX 9.0 and Teamcenter
• Must be experienced with geometric dimensioning and tolerating per ASME Y14.5M-199A
• A working knowledge of ASME Y14.100 and Mil-Standard 100 is also desired.

Experience Preferred:
Candidate must have a Bachelor's of Science Degree in Mechanical Engineering Technology or Mechanical Engineering with a minimum of 2 years of experience preferred.

Skills & Qualifications:
• Fundamental knowledge of CAD drafting practices
• Good communication skills, both written and verbal
• Ability to work quickly and accurately while under schedule pressure and exhibit a large degree of patience
• Strong time management and organizational skills
• Must be a graduate of a CAD/Drafting/Design/Computer Aided program
 
Job Number: PL-NX
Rate: open
Per Diem: yes
Duration: 12+ mos.
Start Date: 2 weeks
Input Date: 10/18/2017
Last Updated: 10/24/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Electrical 3D Wire Harness Routing and Components Mounting

Description:
Design and develop vehicle 3D wire harnesses, clipping and brackets to mount components and systems using Siemens NX CAD..
Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
Create and maintain detailed part and assembly drawings.
Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
Apply Client and industry drafting and design standards, including GD&T.

BASIC QUALIFICATIONS:

Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
Siemens NX CAD experience preferred.
Create 3D wire harnesses, clipping and brackets to mount electrical components.
CHS Capital Harness experience preferred.
Previous electrical and electronics packaging experience preferred.
A general knowledge of automotive systems preferred.
Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
 
Job Number: 3312
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 09/22/2017
Last Updated: 10/02/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV (Propulsion)

Description:
Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
- Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
- Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
- Perform propulsion system to airframe and test article to test facility integration.
- Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
- Performs design calculations to validate design requirements.
- Provides data in support of contract data requirements list (CDRL) submittals.
- Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
- Participates as a member of a project team.
- Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
- Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
- Work is reviewed upon completion for adequacy in meeting objectives.
- Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Prior propulsion to airframe and test facility integration experience desired.
- Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
- Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
- Position requires experience using CAD database management tools (WindChill preferred).
- Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
- Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
- Knowledge of manufacturing techniques and inspection requirements is a plus.

Education:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Bachelor’s or Master’s degree in an appropriate discipline and nine (9) years of related technical experience as engineering designer or equivalent combination of education and experience.
 
Job Number: 7961
Job Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV / Propulsion with active secret FL

Description:
160411/7347566

Job Title: NX Mechanical Design Engineer IV / Propulsion

Number of Positions: 2
Remaining Positions: 2
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **

• Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design. This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts. Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
• Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts. Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
• Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
• Perform propulsion system to airframe and test article to test facility integration.
• Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
• Performs design calculations to validate design requirements.
• Provides data in support of contract data requirements list (CDRL) submittals.
• Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
• Participates as a member of a project team.
• Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
• Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
• Work is reviewed upon completion for adequacy in meeting objectives.
• Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.
Skills: • Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
• Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
• Prior propulsion to airframe and test facility integration experience desired.
• Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
• Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
• Position requires experience using CAD database management tools (WindChill preferred).
• Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
• Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
• Knowledge of manufacturing techniques and inspection requirements is a plus.
Education: Bachelor’s or Master’s degree in an appropriate discipline and nine years of related technical experience as engineering designer or equivalent combination of education and experience.

Skills: Required
• SIEMENS
• GEOMETRIC DIMENSIONING
• GEOMETRIC TOLERANCING
• AEROSPACE ENGINEERING
• WINDCHILL


State/Province: Florida
City/Town: Jupiter


Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 10/23/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7347566
Job Location: Jupiter, FL
Rate: 60/hr max
Duration: 12 month contract
Input Date: 09/25/2017
Last Updated: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations / General Manager

Description:
Lead all site efforts concerning operations, quality, engineering, customer support and business development
Partner with off-site leaders in IT, Finance, Human Resources and Facility Management to ensure business needs are met and manage local members of these teams cooperatively in a Matrix Organization.
As the leader of this growing business, continue efforts to further grow and improve profitability;
Work to develop and expand contacts at key strategic customers; lead and participate as required at industry trade shows and conferences.
Be the change agent to drive a strong culture of reducing operations and product costs through continuous improvement or 6 sigma methods;
Work in synergy with other MRO companies within the parent corporation;
Lead site budgeting efforts and adherence to approved financial plans in partnership with the finance director and corporate leaders.
Job Requirements

Requirements:

Requires a Bachelor’s Degree in Engineering, or a technical field. An MBA is a strong plus.
Essential to have at least ten years of experience in a leadership role within a FAA MRO Repair Station;
Experience with specialty welding processes, heat treat, complex machining and the development of FAA DER repairs;
Essential to have had operations management experience; must understand the general flow of MRO products through a typical shop from order receipt through invoicing;
A strong ability to assess and understand customer technical requirements, as well as understanding and providing value added alternative solutions;
Strong written, verbal and presentation communication skills; must be able to communicate with all levels Must have a great attitude that is welcomed by employees, customers and stakeholders that is business focused.
Good leadership skills and development of talent; We are looking for a roll up the sleeves leader that knows how to nurture and focus teams members while meeting customer and corporate expectations.
The successful candidate will maintain the highest professional ethics and integrity. Meeting corporate compliance and aerospace regulatory agency mandates are essential. He or she will have a strong intellectual capacity, superior analytical skills, professional judgment, and the ability to communicate at all levels of the company;
Demonstrated hands on manufacturing experience with continuous improvement or 6 sigma programs
Advanced MS Office computer skills (Word, Excel, PowerPoint) are a must. Experience with ERP systems and engineering CAD systems are a plus.
Due to ITAR restrictions, must be a US Person.
 
Job Location: CA
Duration: FULL TIME
Start Date: ASAP
Input Date: 10/25/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Operations / General Manager

Description:
Responsibilities:

Lead all site efforts concerning operations, quality, engineering, customer support and business development
Partner with off-site leaders in IT, Finance, Human Resources and Facility Management to ensure business needs are met and manage local members of these teams cooperatively in a Matrix Organization.
As the leader of this growing business, continue efforts to further grow and improve profitability;
Work to develop and expand contacts at key strategic customers; lead and participate as required at industry trade shows and conferences.
Be the change agent to drive a strong culture of reducing operations and product costs through continuous improvement or 6 sigma methods;
Work in synergy with other MRO companies within the parent corporation;
Lead site budgeting efforts and adherence to approved financial plans in partnership with the finance director and corporate leaders.
Job Requirements

Requirements:

Requires a Bachelor’s Degree in Engineering, or a technical field. An MBA is a strong plus.
Essential to have at least ten years of experience in a leadership role within a FAA MRO Repair Station;
Experience with specialty welding processes, heat treat, complex machining and the development of FAA DER repairs;
Essential to have had operations management experience; must understand the general flow of MRO products through a typical shop from order receipt through invoicing;
A strong ability to assess and understand customer technical requirements, as well as understanding and providing value added alternative solutions;
Strong written, verbal and presentation communication skills; must be able to communicate with all levels Must have a great attitude that is welcomed by employees, customers and stakeholders that is business focused.
Good leadership skills and development of talent; We are looking for a roll up the sleeves leader that knows how to nurture and focus teams members while meeting customer and corporate expectations.
The successful candidate will maintain the highest professional ethics and integrity. Meeting corporate compliance and aerospace regulatory agency mandates are essential. He or she will have a strong intellectual capacity, superior analytical skills, professional judgment, and the ability to communicate at all levels of the company;
Demonstrated hands on manufacturing experience with continuous improvement or 6 sigma programs
Advanced MS Office computer skills (Word, Excel, PowerPoint) are a must. Experience with ERP systems and engineering CAD systems are a plus.
Due to ITAR restrictions, must be a US Person.
 
Job Location: San Diego, CA
Input Date: 10/03/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer

Description:
PCB Designer

Location: York, PA
Duration: 18 months with possible Contract to hire

Description:
The PCB (Printed Circuit Board) Designer position performs schematic capture, layout and implementation of design rules on PCBs of varying complexity. The proper PCB tools are applied to ensure that the board functions as expected with reference to specific requirements.

Responsibilities:
- Develop electronic PCB component library figures.
- Understand electronic symbols and how they interconnect to each other.
- Prepare layouts and component placement based on design rules and processes.
- Prepare assembly drawings and BOMs.
- Be able to gain a quick understanding of documentation structure and applicable processes.
- Demonstrate basic knowledge of PCB manufacturing processes.
- Work with PCB manufacturing and engineering to develop/revise PCB processes to ensure quality.
- Provide direction and training to and check work of less experienced PCB tool users.
- Possess enough knowledge of Pro-E to provide 3-D conversion from PCB layout tool.

Qualifications:
- Should have at least 8 years of Printed Circuit Board (PCB) schematic capture/Layout experience in Mentor (DX Designer, Expedition and Hyperlinx) and/or P-CAD, preferably in the area of embedded systems.
- Should possess a two year technical or associate degree in a related field.
- Experience in the use of Theda is desirable.
- Requires a self-assertive individual that will take the initiative to quickly gain product knowledge and be able to apply that knowledge with minimal direction.
- Self-motivated, team oriented individual who can work independently and can multiplex several tasks.
- Maintain focus on project schedules and follow through to meet them.
- Proficient in the use of Microsoft tools such as Excel, Word, etc.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-15986
Job Location: York,, PA
Input Date: 09/25/2017
Last Updated: 09/28/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB Designer

Description:
U.S. citizenship is required

Candidate must have a thorough understanding of the design and documentation requirements of Printed Circuit boards. Must be experienced in generating designs for Digital Signal processing, Hi Frequency RF PCB designs, and understand routing principles relating to hi-speed routing and interference design. Candidate must have multi-layer experience up to 24 layers, be conversant in PCB design and fabrication details, able to troubleshoot design data and configuration problems with outside vendors. Must be comfortable working in an Integrated Product Team environment. Candidate must have extensive experience with Cadence Allegro. Extensive experience in design, drafting and detailing of mechanical fab, electro-mechanical assemblies, etc. Ability to multi-task and handle numerous jobs simultaneously.
 
Job Number: 40810
Job Location: AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer

Description:
Packaging Design Engineer
Torrance, CA
Contract 3 month

Need packaging engineer to support current demanding tasks (Thermal Analysis & Stress Analysis – Three months) for multiple programs.
•Flight Control Actuation Systems, Reliability Prediction

•Computer Skills: Siemens, NX, ANSYS, and UG CAD Software.

•COT’s electronic component (Commercial off the shelf) design insertion, up screening techniques

•Understanding and application of relevant IPC and MIL standards and guidelines

•Understanding and application of GD&T for drawings and models

•Ability to support packaging design team including designers, drafters, assemblers and technicians and other engineers and analysts

•Ability to work with larger design teams including design lead, project lead, product and manufacturing engineering, program management, systems and actuation engineering.
· Preferred MS Degree in Mechanical Engineering or Bachelor’s degree in Mechanical Engineering with 4 years experience.

· Must be US Citizen
 
Job Number: 52389
Job Location: Torrance, CA
Rate: $50/hr
Per Diem: possible
Duration: 3 months
Input Date: 09/29/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer / NX CA

Description:
Request number: 4950
Job title: Packaging Design Engineer

Number of openings: 2
Job type: Engineering/IT/Professional
Position location: Torrance - CA
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA

Driving on company time?: No
Maximum Hourly Pay Rate: 50
Start Date: 10/02/2017
Tentative End Date: 01/09/2018

Job Description

Function: Need packaging engineer to support current demanding tasks (Thermal Analysis & Stress Analysis – Three months) for multiple programs.
Essential job functions: •Flight Control Actuation Systems, Reliability Prediction

•Computer Skills: Siemens, NX, ANSYS, and UG CAD Software.

•COT’s electronic component (Commercial off the shelf) design insertion, up screening techniques

•Understanding and application of relevant IPC and MIL standards and guidelines

•Understanding and application of GD&T for drawings and models

•Ability to support packaging design team including designers, drafters, assemblers and technicians and other engineers and analysts

•Ability to work with larger design teams including design lead, project lead, product and manufacturing engineering, program management, systems and actuation engineering.
Required skills: · Preferred MS Degree in Mechanical Engineering
· Minimum requirement Bachelor’s degree in Mechanical Engineering with 4 years experience.

· Due to the Nature of the Must be a US Citizen, Dual citizenship status is not permitted.
 
Job Number: JE-4950
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 3 months +
Input Date: 10/11/2017
Last Updated: 10/30/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer

Description:
Product Engineer

Location: Plymouth, MI
Duration: 6 months

Description:
Manager is currently seeking a Product Engineer with strong interest in product design and excellent communication skills to work on vehicle complete seat systems. The Engineer will support root cause identification, issue resolution and change management with the customer on the program. The Engineer will be the key liaison between the customer, Adient seating plant and other Tier 1 suppliers. Experience with armrests and head restraints a plus.

Requirements:
- Provide front-line customer technical interface for program/product. Develop and provide resolution to customer technical issues.
- Demonstrate the ability to plan, organize and deliver to program requirements.
- Must be able to balance multiple requirements from differing internal functional groups, Subject Matter Experts and the customer to find optimized technical solutions.
- Coordinate product design and drawing releases from mock up to final production.
- Execute robust designs considering manufacturing feasibility.
- Lead customer and supplier open issues meetings.
- Lead technical design reviews monthly.
- Update/ generate DFMEAs.
- Coordinate product validation and maintain DVP&R.

Qualifications:
- Bachelor's Degree required; Mechanical Engineering degree strongly preferred.
- 0 to 10 years prior experience working in the automotive industry.
- Strong analytical skills and work effectively with customers / suppliers and the development team.
- Strong communication skills.
- CAD, CATIA or Unigraphics experience a plus.
- Experience with PDfSS, FEA and GD&T desired.
- Prior experience with development process, plant exposure and program launch highly desired.

Conference Call Notes:
- Complete seat experience is great plus
- Will consider a candidate with Truck/Tractor/Aerospace industry Seating experience with good CAD, CATIA or Unigraphics experience.
- Bachelors' degree required.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-13699
Job Location: Plymouth, MI
Input Date: 10/05/2017
Last Updated: 10/09/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

Description:
160214/7333750
Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

Number of Positions: 2

5 to 10 years of experience

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

** Manager likes to see college GPA's on resumes **


-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills: -Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.
Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



Skills: Required
• PROJECT ENGINEER
• COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park



Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333750
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 10/12/2017
Last Updated: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $40.00 - $55.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
- Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, igniters).
- Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support; test planning, vendor/supplier integration and coordination.
- Supports combustion devices hardware through the entire product life cycle.
- Analyzes and verifies product design and performance for adequacy and reliability.
- Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
- Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


Skills:
- General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
- Ability to read and interpret blueprints, technical drawings and specifications;
- Ability to communicate clearly and concisely;
- May require the use of engineering test equipment, CAD, and/or various computer systems.
- Ability to operate effectively in a team environment.


Education:
- Bachelor’s degree in an appropriate discipline/science and two (2) years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: 7818
Job Location: Canoga Park, CA
Rate: $40.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/07/2018
Last Updated: 03/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II/III / engineering degree required CA

Description:
160212/7333291

Job Title: Project Engineer II/III
Need degreed engineer
55/hr max

6 openings

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors).
Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
Supports combustion devices hardware through the entire product life cycle.
Analyzes and verifies product design and performance for adequacy and reliability.
Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


Skills:
General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
Ability to operate effectively in a team environment.

Keywords:
Education:
Bachelor's degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.

Skills and Experience:
Required Skills:
PROJECT ENGINEER
COMPONENT ENGINEERING

# of Positions: 1

Location:
Canoga Park, CA

Schedule:
Start Date: 09/11/2017
Estimated End Date: 03/11/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
Standard Schedule:
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7333291
Job Location: Canoga Park, CA
Rate: 55//hr max
Duration: 6 month contract
Input Date: 03/19/2018
Last Updated: 03/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer/Component Product Engineer II-III (Valves & Acutators

Description:
Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** This is NOT a Designer role**
-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
 
Job Number: 7823
Job Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/11/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Release Coordinator

Description:
Release Coordinator

Location: Plymouth, MI
Duration: 12 months with possible contract to hire

Description:
Metals & Mechanisms Engineering
Current Production Support

Assisting PMs and Eng Managers with the SDT/CM meetings
Assisting with document control for all change management

Tracking of IRs/ECRs/ECOs/DAs:
Provide weekly report of all IR, ECR, ECO, and DA activity to assure none are lost or take too long to process.
- Manage one-hour weekly review with Director and Engineers.
- Assist SDTs with review of open IRs, ECRs, ECOs, DAs in weekly SDT meetings.

- Track approvers to press them for timely approval or rational for delay. Help manage/coordinate approval paths and roadblocks for DA/ECR/ECO.
- Alert team if DA is expiring to help prevent unintended expiration.
- Monitor all drawings for 2 signatures, correct ECR/ECO numbers on drawings, drawings match eBOMS, correct process, and completeness.
- Assure approved/released drawings are released and appropriate notification to SDT in support of ECO Implementation.
- Assist Program Managers in monitoring progress on ECO Implementation Plans (Glide Path) to track ECO Implementation is complete (PPAP’d) in all affected plants.
- Audit to assure eBOMs match mBOMs.
- Assist SDTs with storage of all supporting documents (FMEAs, FEA studies, etc.) per the Product Change Management procedure is EPIC/Teamcenter or other designated secure location.
Measures: Weekly reporting of these Implementation Plans for all changes active for IR/ECR/ECO/DO Implementation in production.

Plant Support – Provide ongoing support for Manufacturing Operations.
- Respond to all Plant/Manufacturing/Purchasing requests for drawings and change documentation and status.
- Monitor implementation plan (Glide Path) with Plant Coordinators in each plant to confirm ECOs and DAs are implemented in all affected plants.
- Audit to assure all End Items shipped by Metals/Mechanisms are supported by an SDT in EPIC. Work with Program Managers and Engineering Director to correct/update/maintain all SDTs in EPIC to assure the correct SDT Members (required) Engineering Managers, Program Mangers, Engineering Director and (desired) Account Financial Manager, Quality Engineer, Manufacturing Engineer, Buyer, and Plant Coordinator.
Measures: Plant/Manufacturing/Purchasing support provided in a timely manner. SDTs in EPIC correct and maintained for all End Items.

Support SDT / Change Management Meetings
- Attend applicable SDT / Change Management meetings for all assigned programs.
- Assist the Program Managers in facilitating (the regular meeting cadence. (Note: Program Managers are required to lead the meetings).
- Assist Program Managers in maintaining correct SDT membership. Audit membership periodically.
Measures: SDTs in EPIC correct and maintained for all End Items.

EPIC (and PLM) expertise.
- Provide EPIC expertise for all team members – lead resolution for all EPIC concerns and productivity issues.
- Maintain and enhance IR, ECR, and DA Checklist for best practices.
- Coordinate any required training and monitor effective use to assure EPIC is utilized productively.
- Provide PLM expertise and liaison as PLM transition continues.
Measures: Training provided, EPIC efficiently/effectively used for change
management, all SDTs are audited and maintained in EPIC for all finished goods.

Knowledge Sharing – Share with regional/global Release Coordinator team.
- Share current production knowledge with Release Coordinator team – meet at least monthly and provide written summary/status which may be of use globally.
- Stay current and informed regarding new EPIC or PLM development – assure lessons learned and knowledge from current production is shared.
Measures: Summary reporting monthly, routine conf/meeting reporting. Specific examples of knowledge shared.

Development Goal:
Personal Development – Continue to improve skills/experience.
- Identify and take two classes, seminars, or self-training in different categories as part of personal self-development.
Measures: Specific examples of growth in Personal Development and resulting application/accomplishments to the benefit of Client.

Comments:
This position is not looking for anyone with Project Coordinator/Management or Program Management experience. The candidates need to have experience in Release Coordination in the Engineering field.

if interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-17481
Job Location: Plymouth,, MI
Input Date: 10/09/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Drafter

Description:
Senior Drafter
 
Location: Grandview, MO
Duration: 5 months, Temp to hire
 
Reports To: various Engineering Managers
 
Comment: Must have 5 years experience using AutoDesk Inventor

Position Overview
Prepares clear, complete and accurate product and/or part drawings from rough or detailed sketches, customer order specifications or notes by performing the following duties.
 
Essential Duties and Responsibilities
Must be capable of reading customer architectural and mechanical plans.
Uses computer aided drafting (CAD) software to create drawings for customer and manufacturing processes. Drawings are based on designs and sketches provided by engineers or more experienced staff.
Must be capable of reading and understanding customer requirements in the form of quotations and specifications and applying applicable (CAD) details.
Must have working knowledge of drafting fundamentals including orthographic views, standard dimensioning practices, scaling plus English and metric units of measure.
Creates drawings involving checking dimensions of parts, documenting materials to be used, verifying form, fit and function of parts in assemblies.
Follows direction and is capable of learning drafting standards.
Has a working knowledge of manufacturing processes, machines and various building materials.
Must be capable of mentoring others.
Must be capable of verifying the work of others.
Must be capable of developing and documenting drafting standards with an understanding of efficiency and financial impact.
Other duties may be assigned.
 
Qualifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
Education and/or Experience
Associate's degree (A. A.) or equivalent from two-year college or technical school; or five to fifteen years related experience and/or training; or equivalent combination of education and experience. Experience with AutoCad dynamic blocks a plus but not required.
 
Language Skills
Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
 
Mathematical Skills
Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
 
Reasoning Ability
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
 
Computer Skills
Required knowledge / experience in MS Office and email using MS Windows platform; AutoCad (applicable release), Inventor or other solid modeling software.
 
Other Skills and Abilities
Attendance is an essential job requirement defined as having regular, consistent, reliable, punctual and predictable attendance including the ability to work regular hours and shifts, overtime before and after shifts and on weekends.
Ability to work as part of a team, including all related departments/plants or independently as required to achieve internal and external customer satisfaction.
 
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, depth perception, and ability to adjust focus.
 
Work Environment
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and risk of electrical shock. The noise level in the work environment is usually moderate.
 

Please send updated resume at ravi@iconma.com
 
Job Number: 17-14878
Job Location: Grandview,, MO
Input Date: 09/25/2017
Last Updated: 10/09/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Design Engineer

Description:
The Senior Mechanical Engineer supports the engineering department in all phases of the product lifecycle (new product development, design improvement, and production / field issue resolution) by utilizing 2-D / 3-D CAD software and associated layout and analysis tools to create new or revise existing product design layouts, schematics, drawings and models. The Senior Mechanical Engineer will work under the direction or guidance of the Engineering Manager and/or Design Engineer in support of new or existing product and would be expected to normally be assigned complex design tasks. The Senior Mechanical Engineer may supervise or direct the works of less experience designers.

Job Requirements
Create new, or modify existing, layouts, schematics, solid models, assembly and detail drawings for complex products and systems.

· Create new models and drawings from red-line existing drawings, hand drawn sketches or verbal direction.


· Utilize GD&T methodology to define tolerances.

· Work with Design Engineering and Manufacturing Engineering to evaluate design options, prepare and provide design layouts and schematics to support early proposal and bid efforts


· Evaluate manufacturing/material variability to ensure manufacturability and ease of assembly and repair.

· Support the engineering department and the designer community to develop best practices and standards to continually improve the quality and efficiency of the design and design process.

· Evaluate required work, plan tasks and execute work assignments as committed.


· Communicate project / work package status accurately and regularly, identify risks and take proactive action to meet schedule commitments.

· Supervise the work of less experienced Designers.


· Support the development of less experienced designers through mentoring, coaching and training.

· Maintain personal proficiency through continued education / training and maintaining currency with improvements in 2D / 3D CAD software, tools and capabilities.
 
Job Location: Seminole, OK
Duration: Full Time
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T2 Engine System Design Engineer

Description:
Location: Canoga Park, CA
Rate:
Duration: 1 year contract


Duties:
Performs engine system level design tasks for liquid rocket engines. Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision. Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems. Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 8030
Job Location: Canoga Park, CA
Rate: $45.00 - $51.50/HR
Per Diem: Split Possbile
Overtime: Possible
Duration: 1 yr
Input Date: 10/04/2017
Last Updated: 10/19/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T2 Engine System Design Engineer CA

Description:
Job Title: T2 Engine System Design Engineer

Number of Positions: 4

Remaining Positions: 4

Duties:
Performs engine system level design tasks for liquid rocket engines. Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision. Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems. Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.

Skills:
Required

CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING AEROSPACE SYSTEMS SYSTEM LEVEL DESIGN

Additional

CAD CAD SOFTWARE DESIGN ENGINEER ENGINEER FABRICATION MACHINING PTC TEST SUPPORT AEROSPACE ANALOG SILICON AUTO CAD CAD MODELING ENGINES LEVEL DESIGN MECHANICAL ENGINEERING PRODUCT DESIGN SYSTEM LEVEL

State/Province: California
City/Town: Canoga Park

Start Date: 10/31/2017 Hours Per Week: 40.00
Est. End Date: 10/27/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7352979
Job Location: Canoga Park, CA
Rate: 51.50/hr
Duration: 12 month contract
Input Date: 10/05/2017
Last Updated: 10/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer

Description:
Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Duration: 1 year contract


Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 8031
Job Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/09/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer / CREO2 3D CAD modeling skills with technical product design experience in liquid rocket / aerospace systems CA

Description:
7352963
Job Title: T3 Engine System Design Engineer

Duties: -Performs engine system level design tasks for liquid rocket engines.

-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills: -CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education: -Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.

Skills and Experience:

Required Skills:

CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
AEROSPACE SYSTEMS ENGINEERING
WINDCHILL

Additional Skills:

CAD
CAD SOFTWARE
DESIGN ENGINEER
ENGINEER
FABRICATION
PRODUCT DESIGN
SYSTEM LEVEL
SYSTEM LEVEL DESIGN
T-CARRIER
MACHINING
PTC
TEST SUPPORT
AEROSPACE
AEROSPACE SYSTEMS
ANALOG SILICON
AUTO CAD
CAD MODELING
ENGINES
LEVEL DESIGN
MECHANICAL ENGINEERING

Minimum Degree Required: Bachelor's Degree

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/31/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
 
Job Number: MB-7352963
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 12 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III (OK)

Description:
Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

CATIA V5
 
Job Number: TechDesOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/06/2017
Last Updated: 11/03/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III - FL

Description:
Uses Computer Aided Design (CAD) tools (CATIA, DELMIA, Pro/e, KDDMS), to develop and maintain mechanical/structural engineering products. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of products based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Works with trackers and laser scanners to as-built and verify modifications to existing infrastructure. Contributes to the integration of product definition across internal and external business partners to provide various scanning products, CAD products and trade studies. Investigates and resolves moderately-complex ground processing and engineering related issues. Verifies accuracy of end products produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction with little supervision.

AA degree in related discipline and typically 5 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: TechDesFL
Job Location: Kennedy Space Center, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 08/31/2017
Last Updated: 10/13/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 3

Description:
Test Engineer - Level 3

Location: Dallas, TX
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 14 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a DoD SECRET CLEARANCE**

Description
-Analyze complex electronic devices and circuitry to design automated card level test equipment (ATE), establish hardware and software test requirements, design and document ATE, integrate ATE software and hardware, and demonstrate ATE work product completion.
-Must be interested in working with both hardware and software, must be able to complete tasks per established schedule, and must have strong writing and communication skills.

Skill/Experience/Education/MANDATORY:
-One of the following degrees: BSEE or BSEET or BSCE
-Agilent 3070 Series III Test Development experience: (4-5+ years' experience required)
-Boundary Scan programming: (4-5+ years' experience required)
-Fixture design: (4-5+ years' experience required)
-Microsoft Office applications: (1-3+ years' experience required)
-Strong writing and communication skills

Desired:
-Agilent device programming (Flash, EEPROM, CPLD): (1-3+ years' experience desired)
-JTAG Tech programming: (1-3+ years' experience desired)
-TestSight CAD translation: (1-3+ years' experience desired)
-CKT1175 programming: (1-3+ years' experience desired)
-Perl: (1-3+ years' experience desired)
 
Job Number: 8014
Job Location: Dallas, TX
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 10/20/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TurboMachinery Mechanical Design Engineer

Description:
Turbomachinery Mechanical Design Engineer-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.
Skills: -Knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD ; Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-May require the use of various computer systems to produce data, analysis and reports.
Education: -Bachelor's or Master's degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.
Required Skills:
GEOMETRIC TOLERANCING
GEOMETRIC DIMENSIONING
AEROSPACE DESIGN
CREO
 
Job Number: CA39256
Job Location: Canoga Park, CA
Per Diem: Yes
Overtime: Possible
Duration: 6 mos +
Start Date: Nov 2017
Input Date: 10/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Karen Wilkes
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer

Description:
Turbomachinery Mechanical Design Engineer

Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.


Skills:
-Knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-May require the use of various computer systems to produce data, analysis and reports.


Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience required.
 
Job Number: 8041
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/25/2017
Last Updated: 01/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / CREO / turbomachinery, rotating machinery experience required CA

Description:
160525/7351950
Job Title: Turbomachinery Mechanical Design Engineer

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.


Skills:
Required

GEOMETRIC TOLERANCING GEOMETRIC DIMENSIONING AEROSPACE DESIGN CREO

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7351950
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 01/22/2018
Last Updated: 02/01/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Back to Advanced Job Search