Job Search Results

636 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/09/22 Sunday 09:51PM Pacific Time by ContractJobHunter. )

Listings 1 - 636

Go To My Job Tracker

Expand all descriptions

2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 04/02/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/25/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Stress Analysis Engineer

Description:
Qualifications:
• Must have experience with aircraft primary structures
• Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
• Minimum 5 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
• Experience with free-body diagrams and classical stress analysis techniques
• Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP.
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus
• Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)
Educational Requirements
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline


The Structures Company is an AA/EOE.
 
Job Number: 71
Job Location: Mojave, CA
Rate: Up to $85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 07/18/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 09/18/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2567 - DYNAMICS ENGINEER - cv, word doc

Description:
Responsible for constructing dynamic models that represent the behavior of landing gears in order to evaluate the operating loads and its stability.

Evaluate and analyze the rigidity, viscosity, mass distribution and friction parameters of our landing gear parts and systems.

Your expertise will be essential to determine the maximum loads according to various flight parameters and aircraft configurations, as well as ground loads.

Have to make sure that our landing gears are not subject to shimmy.

Bachelor's degree in mechanics, mechatronics, aeronautics

Mathematical mind and ability to perform advanced calculations

5 years of experience in kinematic and dynamic analysis of mechanisms using the MSC.ADAMS software

Familiar with hydraulic systems

Ability to solve complex technical problems

Matlab / Simulink environment expertise.

French and English fluency
 
Job Number: 2567
Job Location: Montreal, Canada
Rate: 90.00 US
Per Diem: TBD
Duration: Long Term
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 09/18/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

A&P Mechanic

Description:
The ideal candidates will perform Depot, Intermediate, and Organizational repairs, upgrades and Modifications to Aircraft product lines and their components. 

Duties to include:

  • Component overhaul and repair
  • Crash damage repair
  • Aircraft and component teardown and evaluation
  • Incorporating ECP's
  • Technical directives, ASAM's ASB's and CSN's
  • Validating and verifying retrofit kit upgrades
  • Administering training to customers

 Must be experienced in:

  • Must have 7-10 years of experience on UH-60 aircraft and an A&P license.
  • Maintenance of flight control systems
  • Fuel
  • Drivetrain
  • Rotor Systems
  • Blueprint Reading and Interpretation

Under a minimal of supervision be able to perform a variety of moderately complex tasks. 
 
 
Job Number: 1810092570
Job Location: Huntsville, AL
Duration: 18 months
Input Date: 05/15/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherrita Davis
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lsAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Alcoa, Tennessee!

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:
Airframe & Powerplant technicians are certified and licensed by the Federal Aviation Administration to perform maintenance, scheduled and unscheduled on airframes and engines on aircraft registered in the United States of America

Job Duties:
Examine replacement aircraft parts for defects
Diagnose mechanical or electrical problems
Read and understand maintenance manuals and other technical documents and identify repair procedures
Repair wings, brakes, electrical systems and other aircraft components
Replace defective parts using approved tooling
Test aircraft parts with proper diagnostic equipment
Inspect complete work for compliance and performance standards
Review and research aircraft records
Interpret flight test data to diagnose malfunction and performance problems
Assemble aircraft components, perform required measurement and testing
Install system software and databases
Qualifications:
Possess FAA Airframe, Power plant. or airframe and Power plant Certificate or equivalent work experience (Repairman Certificate eligible)
2 years’ experience on General aviation or Corporate aircraft required.
Cirrus SR2X Experience/Factory Training a plus
Aircraft paint and refinishing experience a plus
Knowledge of Federal Aviation Administration Regulations
FAA Airframe, Power Plant or Airframe and Power Plant Certificate
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44185
Job Location: Aloca, TN
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

AES Electrical UM

Description:
PDS Tech, Inc. is seeking an AES-Electrical Engineer in Wichita, KS
 
  • This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems.
  • Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Aviation Products.
  • Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys).
  • Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft.
  • Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents.
  • Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
  • Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

EDUCATION/ EXPERIENCE:
•          Bachelor’s Degree in required Electrical Engineering,
•          FAA designee (ODA UM or DER) -14 CFR Part 23 Chart C2 – Systems & Equipment Electrical
•          Experience with complex certification projects integrating multiple systems
•          Minimum of 3-4 years of engineering experience or relative aviation technical or systems experience.

QUALIFICATONS:
•          Strong computer, written and verbal communication skills required.
•          Experience with avionics and electrical system design to the requirements of 14 CFR Part 23 preferred.
•          Experience with computer-aided wiring diagram and harnessing software is desired. Mentor Graphics preferred.
•          Experience with electrical wiring, harnessing, and manufacturing is strongly desired.
•          Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience preferred.
•          Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.       
 
 
Job Number: 1910104983
Job Location: Wichita, KS
Duration: 12 months
Input Date: 08/05/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Jack Beabout
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVTnQAO&URLSource=cjhunter

APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: JE-1656-1
Job Location: Greenville, SC
Rate: 25-29/hr max
Per Diem: no
Duration: 9 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / 2nd shift / 3 years of P-3 Orion required / Flight Line experience required URGENT SC

Description:
164387 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1662-1

Start Date: 7/8/2019
End Date: 12/20/2019
Position Type: Contract

Job Summary:
Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.
Inspects, troubleshoots, repairs, overhauls and modifies P-3 Orion aircraft systems and power plants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, power plants, flight controls, disassembly, reassembly, rigging and aircraft movement.
Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.
Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
Candidate must possess at minimum, 3 years of P3 Orion MMRO or Flight Line Experience



Qty 1 position needed
This position is the 2nd Shift 1530-0130
 
Job Number: JE-1662-1
Job Location: Greenville, SC
Rate: DOE
Duration: 6 months +
Start Date: 2nd Shift - 3:30pm-1:00am
Input Date: 07/31/2019
Last Updated: 09/11/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

APG Mechanic / military or commercial aircraft experience / no clearance URGENT URGENT SC

Description:
165736 Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 1814-1
Max Pay Rate: $29.00/hr
Start Date: 8/19/2019
End Date: 12/31/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.


Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
The hiring manager really needs to fill these 4 positions A.S.A.P. In an effort to fill these positions he has changed the requirements to 3 years APG experience on any Heavy Military Aircrafts.

Qty 4 position needed
Engine and Prop Rigging desired.

Experience
Areas of Expertise Fuel No 2 2 - 4 Years
Areas of Expertise Fuel Systems No 2 2 - 4 Years
Areas of Expertise P-3 No 1 6+ Years
 
Job Number: JE-1814-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 4 months +
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Adv Compos Tech III

Description:

PDS is seeking an Advanced Composite Tech III for an open position in Tulsa, OK

Position Purpose:



Under minimal supervision, perform one or more of the following composite part manufacturing functions: complex lay-up, cutting, bagging, autoclave, trimming, and/or complex repairs, in a production environment. Provide specialized technical assistance and interact with team members to resolve manufacturing issues.

Essential Functions:
1. Manufacture a wide variety of composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Proficient at reading work orders, blueprints, specifications, lofts, sketches and operation sheets to determine sequence of operations. 4. Must be skilled in the use of special tools and equipment to include precision measuring devices such as 6" scale, 1" micrometer, 6" dial caliper. 5. Check all work and ensure a defect free assembly prior to inspection. 6. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 7. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 8. Support Lean activities. 


Additional Functions: 1. Perform other duties as assigned. 


Education and Experience Requirements:


High School graduate or GED. Basic computer skills.
Three (3) years of related composite experience.
Ability to work with composite resins and materials.
Requires ability to read and interpret blueprints.
Must be able to use mathematical formulas to solve dimensional problems using fractions and decimals.



Other Requirements: 1. Must be able to meet the physical requirements of the position. 2. Must be able to work any shift.
 
 
Job Number: 1810092566
Job Location: Tulsa, OK
Per Diem: No
Duration: 0 months
Input Date: 07/25/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f3lEAAQ&URLSource=cjhunter

Advanced Composite Technician I

Description:

Position Purpose:



Under moderate supervision, perform one or more of the following composite part manufacturing functions: lay-up, cutting, bagging, autoclave, trimming, and/or repair, in a production environment. 

Principal Duties and Responsibilities:

Essential Functions: 1. Manufacture composite aircraft parts to meet manufacturing specifications, in a team oriented work environment. 2. Demonstrate the ability to meet the requirements of the Manufacturing Competencies at the appropriate level in the Employee Effectiveness Review. 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations. 4. Check all work and ensure a defect free assembly prior to inspection. 5. Maintain and use all logs and records. Example: MIR sheets, DMTs, Crabs, PCOs, DR/DI, etc. 6. Maintain a neat and orderly work area, support the company FOD and 5S programs, and comply with all safety regulations. 7. Support Lean activities. 

Additional Functions: 1. Perform other duties as assigned. 

 




 


Education and Experience Requirements:


High School graduate or GED. Basic computer skills. One (1) year related composite experience. Ability to work with composite resins and materials. Requires ability to read a interpret blueprints. Read and interpret 6" scale.


Unique Skills:



  • One year of composite or related experience.
  • Ability to work with pneumatic tools.
  • Second shift position.
  • Candidate will be training on a first shift and then moving to second shift.



Other Requirements:
1. Must be able to meet the physical requirements of the position.
2. Must be able to work any shift.



 

 
Job Number: 1910104828
Job Location: Savannah, GA
Per Diem: No
Duration: 0 months
Input Date: 08/02/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUwPQAW&URLSource=cjhunter

Aeronautical Engineer

Description:
Location: Fort Worth, TX
Rate: $71.14/HR
Duration: 10 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aero source tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aero source will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Design, develop, and test a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education / Experience:
- Level 4: BS+16 YRS or MS+14 YRS
- Prior F-16 design experience is desired but, not required.
- Past work experience using CATIA V4 and F-16 EBOM system (MPRSII) is highly desired.
- Design experience sought after covers systems installation and equipment installation however, airframe design experience (primary and secondary structure) is also acceptable.
- Past F-22 design experience is desired.
 
Job Number: 10788
Job Location: Fort Worth, TX
Rate: $71.14/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 10 mos
Start Date: ASAP
Input Date: 04/15/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/26/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS Control Systems and Simulation Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 2-3 years.

Responsibilities:

In charge of ECS system control laws and logic design and
establishing relative guide and process.
In charge of simulating system control laws and logic and establishing relative guide and process.
In charge of verifying system control laws and logic simulation.
In charge of integrating system real time simulation.
In charge of studying system control simulation new technology.
In charge of training of system control simulation.


Skills/ Qualifications / Experience Sought:


Skilled in MatLab simulink tool and other simulation tools.
Skilled in system control laws and logic design.
Skilled in simulating system control laws and logic design.
Versed in integrating and revising real time simulation.
Familiar with DO-178B/C.
Familiar with real time simulation industry standard, guides and new technology.
Experience in civil aircraft real time simulation design.
10 years ECS system control real time simulation experience.
Fluent English, with good communication skills.
 
Job Number: BH-56-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS Control Systems and Simulation Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft ECS Control Systems and Simulation Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

In charge of ECS system control laws and logic design and
establishing relative guide and process.
In charge of simulating system control laws and logic and establishing relative guide and process.
In charge of verifying system control laws and logic simulation.
In charge of integrating system real time simulation.
In charge of studying system control simulation new technology.
In charge of training of system control simulation.


Skills/ Qualifications / Experience Sought:


Skilled in MatLab simulink tool and other simulation tools.
Skilled in system control laws and logic design.
Skilled in simulating system control laws and logic design.
Versed in integrating and revising real time simulation.
Familiar with DO-178B/C.
Familiar with real time simulation industry standard, guides and new technology.
Experience in civil aircraft real time simulation design.
10 years ECS system control real time simulation experience.
Fluent English, with good communication skills.
 
Job Number: BH-56
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/16/2019
Input Date: 07/16/2019
Last Updated: 08/14/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Fuel Systems Engineer - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Fuel Inerting Systems Engineer

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

Fuel system performance simulation and analysis.
Inerting system performance simulation and analysis.
Fuel tank flammability analysis .
Fuel and inerting system tube stress analysis.
Fuel and inerting system simulation platform building.

Skills/ Qualifications / Experience Sought:

Experience working for main OEM or fuel and inerting system supplier for more than
20 years.
Experience on fuel and inerting system simulation more than 15 years.
Familiar with simulation software, such as Flowmaster, Fluent, CAEPipe, Matlab, Abaqus, etc.
Fluent English, with good communication.
 
Job Number: BH-55-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 09/16/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Ground Support Equipment Technicians

Description:
STS Technical Services is hiring Aircraft Ground Support Equipment Technicians in Denver, Colorado.

Qualifications:
Minimum three (3) years of experience in the equipment repair industry.
Previous ground support equipment is preferred
Strong knowledge of Diesel Engines, Electrical systems, Hydraulics, Generators.
Computer literate.
Must furnish own hand tools.
Ability to attain Airport issued ID badge
High school diploma or G.E.D Degree in Automotive, Diesel mechanics preferred
Valid Driver’s License
Vocational training certificate or equivalent in work experience
Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 48247
Job Location: Denver, CO
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Design Engineer

Description:
The Interior Design Engineer will perform interior design engineering for cabin & cockpit structures, components, and trim for aircraft. The individual will also on occasion support tasks associated with interior Installations.

Duties and Responsibilities:
1. Creates conceptual designs for interiors of the aircraft through 3D modeling software, drawings, and/or drafting application.
2. Develops designs for form/fit/function to meet customer and design criteria.
3. Provides designs for the fabrication process including sheet metal, extrusions and inject molding
4. Validates engineering designs per engineering core principles, design standards, processes and industry best practices.
5. Makes recommendations to engineering lead/management.
6. Researches and maintains up to date knowledge of technical data pertaining to cabin, cockpit structures, hardware, material, and finishes.
7. Ensures adherence to program schedule.
8. Performs other duties as assigned.

Education, Work Experience, Certification and/or Licensure:
1. 3+ years of engineering experience with at least three years of design engineering experience directly related to mechanical/interior design for commercial aircraft.

Knowledge, Skills and Abilities:
1. Working knowledge of conceptual design development of aircraft interiors.
2. Working knowledge of industry standard (i.e. - parts lists, bill of materials, parts and standards callout, etc).
3. In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T).
4. Familiarity with 14CFR Part 23/25.
5. Proficiency in CATIA V5 workbenches.
6. Proficiency in Teamcenter (or equivalent PLM tool).
7. Ability to work independently or within a team environment.
8. Ability to communicate effectively throughout all levels within an organization and present data clearly and concisely.
9. Ability to work cross functionally with Quality and Production to resolve issues on the production line.


The Structures Company is an AA/EOE.
 
Job Number: 322
Job Location: NC
Rate: $52-$60/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interior Technicians

Description:
STS Technical Services is hiring Aircraft Interior Technicians in Nashville, Tennessee!

We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.

Essential Duties & Responsibilities:
Will be performing backshop work as well as interior composite repairs on aircraft
Qualifications:
At least 3 years experience on Regional or Commercial aircraft in an MRO setting.
STS Technical Services
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 47583
Job Location: Nashville, Tenne
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Lighting Engineer

Description:
Here's the Deal
As Aircraft Lighting Engineer you will report directly to the Vice President of Cockpit and Subsystems and be responsible for defining the technical requirements relating to performance, design, integration and testing of the Interior, Exterior and Emergency lighting systems for the Aerion AS2 supersonic business jet.

On any given day you might:
• Perform analysis and design relating to placement of lights on the AS2
• Provide aircraft level lighting guidance
• Establish requirements, processes and methodologies relating to the lighting system
• Calculate and validate lighting performance
• System design and architecture analysis
• Interact directly with suppliers
• Define traceability to the FARs
• Perform and teach electromagnetic compatibility design and analysis
• Perform computational electromagnetics calculations and assessments
• Validate and verify requirements
• Provide guidance for System test and certification
• Report Status
• Provide guidance to the various Sub-systems and Structures IPTs in support of their development and certification
• Provide subject-matter expert level guidance on both practical and theoretical aspects of the lighting systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention

We're looking for someone who has:
• Bachelor’s degree in relevant field required
• 3+ years of relevant experience
• Lighting systems design and integration experience
• Aircraft development experience
• Experience developing processes, guidelines, and methodologies to support the development of the Aerion AS2
• A clear understanding of industry guidelines and documents relevant to the design and certification of the lighting system

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-031
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: brandon@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Maintenance Technicians

Description:
STS Technical Services is hiring Aircraft Maintenance Technicians in Great Falls, Montana.

Duties & Responsibilities:
Communicate when tasks are complete so next trade can move onto the job.
Ensure work environment is safe and clean. Promote company values, vision, and mission.
Demonstrated capability and competency in field of expertise. Good oral and written communication skills.
Demonstrated ability to work well with other individuals throughout the organization.
Possesses strong fundamental aircraft knowledge. Builds quality capability and responsiveness for company.
Carry out maintenance repairs on customer and company aircraft under the supervision of a qualified technician or Lead Technician.
Completely and accurately sign off work in progress documentation and work cards for work accomplished.
Report unserviceable equipment to assigned Lead Technician and/or delegate.
Notify Lead Technician of all defects discovered during maintenance.
Attend training courses as directed by company management.
Required Qualifications:
2+ years aircraft heavy maintenance experience
Possess excellent oral and written communication skills.
Demonstrated ability to work well with other individuals throughout the organization.
Preferred Experience: A&P License
CRJ 200/900 heavy maintenance experience.
Regional aircraft maintenance experience.
The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job.
The employee will be required to; Occasionally lift 50 pounds.
Bend, stoop, kneel, crawl and climb ladders.
Stand for extended periods of time .
Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48059
Job Location: Great Falls, MT
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Mechanic I - Clearance KY

Description:
16537 Job Title: SCA Aircraft Mechanic I
Work Site Address: Lexington, KY 40516
Job Number: 1746-1
Max Pay Rate: $30.29/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract

• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
The Aircraft Mechanic I (Electrical)troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills. This worker reads and interprets manufacturers' and airline's maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. This mechanic performs 100-hour, progressive, isochronal, phase, periodic, and other hourly or calendar inspections, examines reciprocating engines for cracked cylinders and oil leaks, and listens to operating engine to detect and diagnose malfunctions, such as sticking or burnt valves, inspects jet engines and components for cracks, corrosion, foreign object damage, burned areas, distortions, security, warping, wear, and missing segments. Inspects jet engine turbine blades to detect cracks, distortion, corrosion, burn-out, security, or breaks, tests engine operation, using testing equipment, such as ignition analyzer, compression checker, distributor timer, ammeter, and jet calibration (Jetcal) tester, to locate source of malfunction. Work involves: replacing or repairing worn or damaged components, such as carburetors, alternators, magnetos, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft. Job duties require that this mechanic: adjusts, repairs, or replaces electrical wiring system and aircraft accessories, performs preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes. This incumbent supervises the jacking and towing of aircraft, enters in the maintenance records description of the work performed and verifies the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair. This worker may be required to be licensed by Federal Aviation Administration.

Qualifications and Education Requirements
Applicant must have H-60 experience. H-47 experience is also welcome.
-Applicant must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.
-Applicant must have experience installing and testing of electrical/avionic systems. Experience in wiring schematics and wire running of Aircraft a plus.
-Applicant must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers.
This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.
Must be able to prioritize workload to maintain schedules on assigned projects.
-Applicant must be able to travel when required. This requirement may encompass 20% - 40% of the work year.
-Applicant must be able to work Overtime as needed.
-Applicant must be able to work multiple shifts as required for need of schedule/budget.

Preferred Skills
Applicant shall be familiar with the MOC’s and troubleshooting of engine control systems, ASE, directional and communications radios, CAAS cockpit integration, digital auto-pilot and Stabilator.
-Applicant shall be proficient in reading and interpreting schematics, engineering drawings and technical manuals.
-Applicant shall be familiar with documenting work in logbook, performing PMD and 40 Hour inspections.
-Applicant shall be able to perform fuel systems checks to include refuel and defuel operations and checking valve logic, fuel operations testing and MOC. Troubleshooting of fuel system to include but not limited to electrical, fuel flow rates, and mechanical failures.
-Applicant shall be knowledgeable of APU operations and troubleshooting, aircraft generator troubleshooting to include electrical and mechanical failures. Service hydraulic systems, engine, transmission and gear boxes. Perform flight control rigging, MOC’s and troubleshooting to include but not limited to electrical, hydraulic and mechanical failures.
-Applicant shall be able to assist Quality in performing aircraft weight and balance and preparing aircraft for flight. Additional duties to include removal and reinstallation of aircraft panels, cabin floors, cabin and cockpit doors.
-Applicant shall be able to assist in performing structural and mechanical modifications and repairs if necessary/required.

Qty 4 positions needed
This position is for an Electrical/Avionics mechanic. The candidate will be working on electrical modifications and repairs.
 
Job Number: JE-1746-1S
Job Location: Lexington, KY
Rate: 30.29/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opening in Lexington, KY.

RESPONSIBILITIES
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIREMENTS
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

DESIRED
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Depot Maintenance Repair experience

WORK SCHEDULE
4/10

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 180169
Job Location: Lexington, KY
Rate: Up to $31.59 DOE
Duration: 3 Months
Input Date: 07/02/2019
Last Updated: 09/22/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II

Description:
Chipton-Ross is seeking an Aircraft Mechanic II for an opportunity in Lexington, KY

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals.

REQUIRED EXPERIENCE:
must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Desired skills :
MH-60M experience preferred.
- Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
- Applicants with a current active Secret level security clearance.
- Depot Maintenance Repair experience

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time, 4/10
Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
 
Job Number: 180155
Job Location: Lexington, KY
Rate: $DOE
Duration: 3 MONTHS
Input Date: 07/01/2019
Last Updated: 09/22/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Aircraft Mechanic II - Clearance KY

Description:
165377 Job Title: SCA Aircraft Mechanic II
Work Site Address: Lexington, KY 40516
Job Number: 1749-1
Max Pay Rate: $31.59/hr
Start Date: 7/15/2019
End Date: 10/13/2019
Position Type: Contract
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Summary:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.


Qualifications and Education Requirements
Desired Applicant must have experience and ability to operate or perform one or more of the following:
Aircraft structural experience in modification to include but not limited to structural TM/TO repairs, build to print assembly and installation. The candidate must have a common knowledge of tooling required for performance of aircraft structural work. Must be a qualified aviation sheet metal mechanic, employee must have experience in aviation sheet metal, hardware installation such as rivet installation, HI-Loc installation, etc. Candidate must have fabrication to facilitate plane side repairs.
Candidate must have advanced sheetmetal skills that can work with little direction on complex modifications.
- Must be able to work shift schedules during this duration as required by program schedule and customer requirements.
- Candidate must have a high school diploma, or equivalent.
- Minimum 3 years intermediate level aircraft repair or modification experience required.
- Must be proficient in reading and interpreting schematics, engineering drawings and technical manuals / technical orders.
- Minimum 3 years experience with one of the listed airframes H-60, AH-64, CH-47 or OH-58.

Preferred Skills
MH-60M experience preferred.
Documented Military/DOD Service School or Civilian/FAA equivalent training desired.
Depot Maintenance Repair experience

Qty 8 positions needed
This position is for a structural mechanic. The candidate will be working on structural modifications and repairs.
 
Job Number: JE-1749-1S
Job Location: Lexington, KY
Rate: 31.59/hr max
Duration: 3 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aircraft Mechanic II - Structural

Description:
Chipton-Ross is seeking 10 Aircraft Mechanic II's for openings in Jacksonville, FL.

RESPONSIBILITIES:
This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation, and applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. Job requirements: must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects.

REQUIRED EXPERIENCE:
Minimum 5 years of aircraft structural repair.

EDUCATION:
Accredited High School Diploma or GED

FULL TIME/VARIABLE SHIFT
WORK HOURS: This position may require 2nd or 3rd shift assignments and overtime as requested by management.

 
Job Number: 180533
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 12 Months
Input Date: 07/19/2019
Last Updated: 09/22/2019
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Aircraft Operations Analyst

Description:
PDS Tech is seeking a top performer for a key role within the Sales & Marketing Team. You are a marketing specialist and an experienced industry expert, expected to provide world-class solutions for our teams, our customers and prospects in support of marketing the Company's family of aircraft against competitor types.  You understand industry and customer needs in order to support all objectives of the Marketing team.

In this role, you are the subject matter expert (SME) for aircraft performance analysis and the aircraft performance analysis tool used by marketing, in order to help promote the operational advantages of the Company's family of aircraft.  You will also manage, maintain and administer the performance analysis tool used by marketing.

Responsibilities include:
 
  • Analyze complex problems in the areas of aircraft performance and aircraft operations and possess initiative and judgment to recognize implications of results in supporting marketing and sales strategies.
  • Propose solutions to unusual problems and make recommendations that are generally accepted as accurate and feasible.
  • Support both structured and ad hoc training requirements to develop the subject matter discipline within the Marketing team.
  • Act as focal and SME for Marketing’s aircraft performance analysis tool and provide input and guidance into the tool’s maintenance and development.
  • Liaison with Engineering and assist in managing relationships with 3rd party suppliers.

  • Degree in Mathematics, Sciences, Engineering, Transportation Planning and Management or similar preferred.
  • A minimum of three (3) years of experience in Aircraft Performance Engineering. 
  • A good working knowledge of the various worldwide certification requirements (FAR, TC, EASA) and in particular FAR 25 and FAR Part 121.
  • Airline Dispatch and/or Airline Flight Operations experience an asset.
  • You are familiar with the basic features of many regional aircraft type.
  • Good presentation and communication skills combined with exceptional analytical capability and attention to detail.
  • Strong computing skills that include programming experience and software development, along with expert level proficiency in Excel and Powerpoint.
  • Strong written and verbal English skills; other languages are considered an asset.
  • Pilot’s license is considered an asset.

 
Job Number: 1810092773
Job Location: Nagoya,
Duration: 12 months
Input Date: 05/02/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f54DAAQ&URLSource=cjhunter

Aircraft Painter I

Description:
PDS is seeking an Aircraft Painter for an open position in Savannah, GA.

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 


Principal Duties and Responsibilities 
  • Mask, sand, and prepare aircraft for paint application.
  • Apply glazing and sealing compounds in preparation for final painting.
  • Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 
  • Perform leading edge sealant work in final detail.
  • Comply with all safety, 5S, and housekeeping policies.
  • Use personal protective equipment and ensure aircraft interior is protected (PTP). 
  • Properly care for and maintain shop equipment and tools as assigned.
  • Comply with Paint shop standard practices.
  • Perform other duties as required. 


Additional Functions:
Properly care for and maintain shop equipment and tools as assigned.
Comply with Paint shop standard practices.
Perform other duties as required.   
 

 


 

Education and Experience Requirements: 
High school diploma/GED.
One (1) year of painting experience.
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).
 



Unique Skills:



Must have valid driver's license and reliable transportation. Must be willing to work any shift, including overtime requirements.



Other Requirements:



  •  Ability to read, write, speak, and understand the English language.
  •  Ability to read and interpret blueprints and engineering documentation.
  • Able to pass Pulmonary Function Test to obtain respirator certification.
  • .Ability to use tools, equipment, and materials in the aircraft painting process.
  • Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift.
  •  Must be computer literate.


Please contact Clyde at (813) 463-2513 or email ccallwood@pdstech.com





 


 
Job Number: 1910105155
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/08/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVqTQAW&URLSource=cjhunter

Aircraft Painter I

Description:
PDS is seeking an Aircraft Painter for an open position in Savannah, GA.

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 


Principal Duties and Responsibilities 
  • Mask, sand, and prepare aircraft for paint application.
  • Apply glazing and sealing compounds in preparation for final painting.
  • Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 
  • Perform leading edge sealant work in final detail.
  • Comply with all safety, 5S, and housekeeping policies.
  • Use personal protective equipment and ensure aircraft interior is protected (PTP). 
  • Properly care for and maintain shop equipment and tools as assigned.
  • Comply with Paint shop standard practices.
  • Perform other duties as required. 


Additional Functions:
Properly care for and maintain shop equipment and tools as assigned.
Comply with Paint shop standard practices.
Perform other duties as required.   
 

 


 

Education and Experience Requirements: 
High school diploma/GED. One (1) year of painting experience.
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).
 



Unique Skills:



Must be able to work with a team and to work any shift when required.



Other Requirements:



  •  Ability to read, write, speak, and understand the English language.
  •  Ability to read and interpret blueprints and engineering documentation.
  • Able to pass Pulmonary Function Test to obtain respirator certification.
  • .Ability to use tools, equipment, and materials in the aircraft painting process.
  • Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift.
  •  Must be computer literate.


 





 


 
Job Number: 1910104926
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/06/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Heidi Smith
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVGeQAO&URLSource=cjhunter

Aircraft Painter I

Description:
PDS is seeking an Aircraft Painter for an open position in Savannah, GA.

The Aircraft Painter I prepares the aircraft for paint related operations by performing tasks safely within schedule while meeting quality expectations. 


Principal Duties and Responsibilities 
  • Mask, sand, and prepare aircraft for paint application.
  • Apply glazing and sealing compounds in preparation for final painting.
  • Operate and maintain all types of preparation and priming equipment. Mix paints and primers. 
  • Perform leading edge sealant work in final detail.
  • Comply with all safety, 5S, and housekeeping policies.
  • Use personal protective equipment and ensure aircraft interior is protected (PTP). 
  • Properly care for and maintain shop equipment and tools as assigned.
  • Comply with Paint shop standard practices.
  • Perform other duties as required. 


Additional Functions:
Properly care for and maintain shop equipment and tools as assigned.
Comply with Paint shop standard practices.
Perform other duties as required.   
 

 


 

Education and Experience Requirements: 
High school diploma/GED. One (1) year of painting experience.
A working knowledge of paint processes and products (lacquers, enamels, epoxies, urethanes, and acrylics).

Unique Skills:



Must be able to work well with a team.




Other Requirements:



  •  Ability to read, write, speak, and understand the English language.
  •  Ability to read and interpret blueprints and engineering documentation.
  • Able to pass Pulmonary Function Test to obtain respirator certification.
  • .Ability to use tools, equipment, and materials in the aircraft painting process.
  • Able to climb ladders and stairs, perform close tolerance work, work in small spaces lift up to 40 pounds and work any shift.
  •  Must be computer literate.


 





 


 
Job Number: 1910104927
Job Location: Savannah, GA
Duration: 6 months
Input Date: 08/01/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Lynn Byers
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GVGjQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in New Iberia, Louisiana.

Qualifications:
3+ years’ experience
Spray and prep experience
Willingness to work overtime
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 32402
Job Location: New Iberia, LA
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Performance Engineer

Description:
PDS Tech is seeking an Aircraft Performance Engineer for the Flight Dynamics Group, Regional Jet Development Project.

This position is located in Nagoya, Japan. However, engineers maybe requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.

The main scope is to work on activities to support the 25.1309 documentation, analysis and certification of aircraft performance under management. This will include interfacing with all other aircraft functions, engineering teams and AeroTEC members* to coordinate and obtain the approval of any task assigned contributing to the aircraft. If requested, the responsible engineer will also work for any other duties performance has such as flight test related activities, development of manuals (AFM, FCOM, MEL and CDL) and CAFM, and performance analysis. * AeroTEC is a subcontract for flight test and reporting activities.

Scope of Work:
(1) will work as a team member of Performance Team in Flight Dynamics Group.

(2) Basic work scope is to develop and finalize aircraft T/C design with minimizing performance penalty, compliant to all applicable Requirements, focusing primarily on FAR/CS Subpart B and 25.1309.
(3) This activity includes;



(a) Identify failure conditions which affect the aircraft performance from SFHA.
(b) Aircraft performance investigations.
(c) Define means of compliance for each failure condition.
(d) Prepare the certification documents and may be requested to coordinate with authority (JCAB, EASA, FAA) 2/2



(4) All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(5) Other scopes (if requested) include helping duties performance has such as flight test related activities (data analysis, modeling, report), development of manuals (AFM, FCOM, MEL and CDL) and CAFM, analysis of aircraft performance considering engine or brake performance.
 



 
Job Number: 1710076141
Job Location: Nagoya,
Duration: 12 months
Input Date: 07/19/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MoDAAU&URLSource=cjhunter

Aircraft Plumber

Description:

PDS is seeking a Aircraft Plumber  for an open position in Savannah, GA.


Under general supervision, fabricates, troubleshoots and repairs water, oxygen, and vent systems using aircraft specifications and design/engineering drawings.
Must have 2 years experience as an Aircraft Plumber     

Essential Functions:
  1. Performs tasks layout, tube/hose fabrication and installation of parts, subassemblies and assemblies for aircraft water, drain, vent, pitot static and oxygen systems. 2. Safely operates equipment such as arbor press, flaring and de-burring machine, punch press, riveting equipment, nitrogen, water and oxygen servicing equipment, pitot static test equipment and other related testing equipment. 3. Identifies and uses common aircraft hardware, fittings and hoses in accordance with FAA requirements, Gulfstream procedures and accepted shop practices. 4. Complies with the inspection/documentation process for any components/systems fabricated, installed and tested. 5. Accomplishes all required paperwork and documentation as required by FAA requirements and Repair Station manual. 6. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment and ensures that aircraft interior is protected (PTP).

Additional Functions:

  • Performs other duties as required.   

Education and Experience Requirements:


High school diploma/GED.
Must have two (2) years of aircraft plumbing experience or aircraft systems.

Unique Skills:

Previous Aircraft experience along with Solumina, Catia V5, and SmarTeam experience preferred.



Other Requirements:
  • Ability to read write, speak, and understand the English language.
  • Ability to read, and interpret blueprints and engineering documentation.
  • Ability to use tools and equipment associated with aircraft plumbing systems.
  • Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
  • Must be computer literate.

 
Job Number: 1910102013
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/06/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gbsQAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Quality Inspectors

Description:
STS Technical Services is hiring Aircraft Quality Inspectors in Bloomfield, Connecticut!

Our client is seeking dedicated, experienced individuals who are interested in becoming part of a team environment. The Aircraft Quality Inspector position provides an excellent opportunity to play a key role in a fast growing aerospace service company. Our client’s FAA/EASA certificated repair facility services a wide range of aircraft electronic and airframe components used in business and regional aircraft, and they are seeking dedicated aviation professionals who are pursuing a rewarding, long-term career.

Essential Functions:
Assesses quality of airframe structural and non-structural component repairs.
Researches technical data in support of repairs including maintenance manuals, engineering drawings and other sources.
Provides technical information to engineers for development of repairs outside of approved data scope when required.
Documents inspection/repair actions per company and FAA requirements.
Qualifications:
Minimum of 4 years experience with civilian airframe maintenance required.
Must have an in-depth knowledge of FAR Part 145, Part 43 and other regulations applicable to repair station operations.
Must be skilled in researching and interpreting maintenance data and repair related prints/drawings.
Must be skilled in the use of inspection tooling related to the responsibilities described herein.
Basic to intermediate level computer skills including use of MS Outlook (or other e-mail application), MS Word and MS Excel required.
Good interpersonal skills and ability to work in a team.
FAA Airframe license required.
Current certification at Level II Fluorescent Penetrant Inspection a plus.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 47111
Job Location: Bloomfield, CT
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Safety Assessment Expert - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Aircraft Safety Assessment Expert.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Main Responsibilities:

  • Primarily work on the aircraft's safety assessment.
  • Take charge for PRA and CMA.
Skills/ Qualifications / Experience Sought:
  • Over 10 years safety assessment and certification experience.
  • Strong experience of Particular Risk analysis (PRA),especially
  • Survivability of Systems, Aft Pressure Bulkhead Rupture and Tail Strike.
  • Strong experience of Common Mode Analysis or certification.
  • Fluent English, with good communication skills.

 
Job Number: BH-60-1
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Duration: 2-3 years
Start Date: 07/18/2019
Input Date: 07/19/2019
Last Updated: 09/22/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Email: adrian.m.a4lm7ajuq8o@strongfield.aptrack.co
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Macon, Georgia!

Qualifications:
Minimum 3 years experience in Commercial MRO
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44558
Job Location: Macon, GA
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Sheet metal Technician

Description:
Position Purpose:
The Sheet metal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.

Principle Duties and Responsibilities:
1. Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheet metal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications.
2. Mentor and train Sheetmetal Technicians, as required. Review their work prior to sign off to ensure work complies with quality control standards.
3. Oversee projects or other technicians and assesses requirements of assigned tasks to procure required. materials and documentation for assigned tasks.
4. Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents.
5. Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information.
6. Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheet metal functions. Use the proper hardware for various sheet metal applications.
7. Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP).
8. Conduct monthly 5S audits, as required.
9. Use the material tracking system to create parts demand, track squawks and to sign-off work.
10. Assist in developing initiatives to meet individual OGSM requirements, as required.
 
Education and Experience Requirements:
High School Diploma or GED required. Four (4) years of sheet metal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver’s License required.
Other Requirements:
1. Advanced knowledge of sheet metal or fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling).
2. Ability to read and interpret blueprints and engineering documentation.
3. Valid drivers license required. to operate towing and other Gulfstream transportation equipment.
4. Ability to read, write, speak, and understand proficiently the English language.
 5. Demonstrates excellent communication skills, both verbal and written.
6. Adapts to sudden schedule changes.
7. Able to use tools and equipment associated with sheet metal work.
8. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
9. Must have a good working knowledge of computers and experience working with MicroSoft Office suite.
10. Must be able to read, write, speak, and understand the English language.
 
 
Job Number: 1910103713
Job Location: Appleton, WI
Duration: 12 months
Input Date: 07/01/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Kristen Schabell
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQqOQAW&URLSource=cjhunter

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Aircraft Structural Test Engineer / Stress Analyst

Description:
PDS Tech is seeking an experienced Aircraft Structural Test Engineer / Stress Analyst in Stratford, CT
 
The candidate will support, perform and manage analysis, research and development of structural engineering specification for ground test and qualification to include structures.  
 
The candidate must have component design, analysis and test experience of dynamic and airframe components.  They must also understand the design process, test facilities, test conduct, review / correlation of data and reporting.
 

 
Job Number: 1910099483
Job Location: Stratford, CT
Duration: 12 months
Input Date: 03/13/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWjAQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Technicians

Description:
STS Technical Services is hiring Aircraft Structures Technicians in Great Falls, Montana.

Duties & Responsibilities:
Provide technical assistance or guidance to the crew.
Communicate when tasks are complete so next trade can move onto the job.
Ensure work environment is safe and clean.
Promote company values, vision and mission. Demonstrated capability and competency in field of expertise.
Excellent oral and written communication skills.
Demonstrated ability to work well with other individuals throughout the organization.
Possesses strong fundamental aircraft knowledge. Builds quality capability and responsiveness.
Carry out maintenance repairs on customer aircraft.
Sign work sheets and work cards for work accomplished – completely and accurately.
Qualifications:
2+ years’ aircraft structures maintenance experience as a structures technician required.
Possess excellent oral and written communication skills required.
Demonstrated ability to work well with other individuals throughout the organization.
A&P License preferred.
CRJ structures experience preferred.
The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of the job.
The employee will be required to occasionally lift 50 pounds
Bend, stoop, kneel, crawl, and climb ladders.
Stand for extended periods of time
Work at heights of greater than 10 feet utilizing fall restraint equipment as necessary.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48060
Job Location: Great Falls, MT
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aircraft Technician II

Description:
PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 
 


 

Education and Experience Requirements:



  • High School Diploma or GED required. 
  • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
  • Valid Driver’s License required.
  • Must be available to work any shift.



Unique Skills:



  • A&P preferred.
  • Second shift position, but candidate should be available to work any shift as assigned by manager.


Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
                                                                                     
 
Job Number: 1910104235
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 07/17/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSybQAG&URLSource=cjhunter

Aircraft Technician II

Description:
PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 
 


 

Education and Experience Requirements:



  • High School Diploma or GED required. 
  • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
  • Valid Driver’s License required.



Unique Skills:



  • This is a weekend - 3rd shift position.
  • Candidates should be available for any shift.
  • A&P preferred.
  • Sheet metal experience is highly desired.


Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 
Job Number: 1910104100
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 07/11/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSaJQAW&URLSource=cjhunter

Aircraft Technician II

Description:
PDS Tech is seeking an RS Acft Tech II for an open position in Brunswick, GA.

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. 

Principal Duties and Responsibilities:

Essential Functions:
1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP). 

Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
7. Perform other duties as assigned. 
 


 

Education and Experience Requirements:



  • High School Diploma or GED required. 
  • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
  • Valid Driver’s License required.
  • Strong structural background preferred.


Unique Skills:



  • A&P and Sheet metal experience desired.


Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
 
Job Number: 1910104113
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 07/02/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSd8QAG&URLSource=cjhunter

Aircraft Technician-Weekend 1st Shift

Description:
WEEKENDS 1st shift!!!! ONLY

Position Purpose:

Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures.

Principle Duties and Responsibilities:
1. Communicate as required. to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision.
2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers.
3. Ensure that all work accomplished meets quality standards and specifications.
4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.)
6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas.
7. Provide training to less experienced technicians.
8. Protect customer property (PTP).
Additional Functions:
1. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered.
2. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
3. Properly use and maintain Company-provided tools and equipment. Return items to designated storage area after use.
4. Comply with safety rules and procedures. Use protective equipment as required. and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk.
5. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders.
6. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned.
Other Requirements:
1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.
2. Must be able to read, write, speak, and understand the English language.
 
Education and Experience Requirements:
High School Diploma or GED required.
FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large size aircraft required.
Valid Driver’s License required.
 
 
Job Number: 1910103978
Job Location: Westfield, MA
Duration: 12 months
Input Date: 07/10/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GS2pQAG&URLSource=cjhunter

Airline Marketing Analyst

Description:
PDS Tech is seeking a top performer for a key role within the Sales & Marketing Team. You will need demonstrated business acumen, strategic thinking capabilities and possess problem solving, creative, analytical, and research skills. You are able to create engaging presentation material and express ideas and present data in a concise manner. 
 
Typical responsibilities include:
 
  • Conducting standard route performance analysis, economic analysis, traffic analysis, fleet planning, financial analysis and competitor evaluations using established processes
  • Identifying market opportunities and prepare business cases demonstrating the value of the Company’s family of aircraft
  • Developing models that accurately reflect an airline’s business environment and allowing for multiple scenarios to be evaluated
  • Developing and executing the marketing strategies for assigned accounts to support the sale of the Company’s family of aircraft
  • Providing insightful analysis, creating and delivering presentations to potential airline customers, external industry stakeholders and internal senior management
  • Taking responsibility for selected accounts and managing relationships with airline contacts
  • Managing multiple deliverables, deadlines and priorities subject to weekly review with management
  • Traveling to visit customers, usually with a team representing the Company, or independently where relationships have been established

  • Minimum Education is University degree with preference given to a Masters level
  • 2 to 4 years related aviation experience required in any combination of the following areas:
    • airline industry, aircraft operations, aircraft performance engineering, fleet planning, marketing and/or financial analysis

  • English language required, other languages are assets
  • Willing to travel on company business
  • Presentable, excellent customer interaction skills
  • Demonstrated analytical and computer skills required
  • Proficient in Microsoft Office (Word, PowerPoint, Excel)

 
Job Number: 1810092771
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/24/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f53ZAAQ&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 02/27/2017
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Product Assembly & Repair Technicians

Description:
STS Technical Services is hiring Aviation Product Assembly & Repair Technicians in Elizabeth, New Jersey!

Job Summary:
This is a position for a repair/assembly technician working on Aviation Cargo Containers. The techs will repair ULD’s (Unit load devices) and metal pallets.

Job Duties:
Familiarize and proficient in retrieving information from customer, manufacturer and FAA technical data
Repair and assemble FAA certified aircraft equipment including aluminum and lightweight containers, heavy duty pallets, Ladders & ground handling equipment, and Galley Carts, according to manufacturer and company manuals
Comply with FAA and company policies and procedures
Ensure accurate and timely completion of work orders
Ability to perform routine and non-routine tasks independently
Maintain work area clean and free of debris, which may interfere with the proper function of any units undergoing maintenance
Maintain safe and clean work environment
Ensure and maintain company tools and equipment in service standard, report any damaged tools and equipment to Station Manager/Supervisor
Ensure system security of the electronic recordkeeping system regarding their area of responsibility and changing password if there is a possibility of its being compromised
Provide feedback/suggestion to improve customer satisfaction
Perform any other duties as assigned by the Station Manager/Supervisor
Qualifications:
Aviation experience a plus, but not required
Warehouse experience a plus, but not required
Physically fit individuals who have some sort of mechanical ability preferred
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44180
Job Location: Elizabeth, NJ
Input Date: 08/12/2019
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionic Technician - Clearance CA

Description:
164441 1657-1 Avionic Technician
Work Location: Edwards AFB, CA
Status: Open

Qty: 2
Desired Start Date: 7/8/2019
End Date: 6/5/2020
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company.

Job Description:
Candidate must have a minimum of 8 years’ experience in fighter aircraft electrical maintenance
Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.
F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.
Work in a safe and efficient manner while maintaining a clean, FOD-free work area.


Pay Rate: $31.85 Hourly

Experience
Areas of Expertise F-22 No 1
 
Job Number: JE-1657-1S
Job Location: Edwards AFB, CA
Rate: 31.85/hr max
Duration: 12 months
Input Date: 09/16/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 06/12/2018
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Electrical Systems Engineer

Description:
PDS Tech, Inc. is seeking an AES Engineer in Wichita, KS
Job Responsibilities:
  • Responsible for integration of supplier avionics equipment into the aircraft.
  • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
  • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
  • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
  • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    Coordinates with direct and indirect customers and suppliers to determine system requirements.
  • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
  • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
    Provides guidance to lower grade engineers in the solution of complex design problems.
  • Reviews and evaluates supplier proposals for potential utilization on future models.
  • Performs above work utilizing frequent application of in-depth engineering principles.
  • Assures supervision awareness of program status, problems and successes.
  • Provides periodic design reviews and update presentations to management of engineering and other company organizations.

Education/Experience: 
  • B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required 
  • Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired 
  • Minimum 7 years of experience in General Aviation or Business Aircraft development programs 
     

Qualifications: 

  • Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred 
  • Ability to read and produce wiring drawings using standard industry practices 
  • Experience with electronic test equipment 
  • Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred 
  • Skills in Microsoft Office suite software 
    C/C++ and assembly programming experience preferred 

 
Job Number: 1910104731
Job Location: Wichita, KS
Duration: 12 months
Input Date: 07/31/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUeoQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
RESPONSIBILITIES:
This position provides support to the Air Force’s Life Cycle Management Center’s (AFLCMC) Technical Engineering Services Directorate (AFLCMC/EZ) in conducting an analysis of the known Navigation Warfare (NAVWAR) and cyber risks associated with positioning, navigation, and timing (PNT) avionics onboard USAF aircraft. The engineer will contribute to AFLCMC/EZ’s effort to analyze NAVWAR and cyber risk associated with PNT subsystems for USAF aircraft. The engineer will work daily with Government employee PNT technical experts and cyber risk assessment specialists. The engineer will frequently be called on by the AFLCMC/EZ Government customer to facilitate technical meetings and support the development of cyber and NAVWAR risk assessment briefings.
Responsible for collaborating with Government employees to conduct NAVWAR and cyber risk analyses for PNT avionics subsystems. The engineer will facilitate risk analysis activities both within AFLCMC/EZ and in outreach activities with USAF aircraft System Program Offices (SPOs) and technical centers of excellence across DoD. Responsible for the day-to-day execution of NAVWAR and cyber risk analysis and reporting activities under the oversight of AFLCMC/EZ Government employees. Facilitates the planning and execution of technical interchanges associated with avionics cyber risk analyses.

REQUIRED EXPERIENCE:
5 years of military or commercial avionics experience
5 years of experience as a DoD employee or contractor
Excellent planning and organizational skills, both in terms of task execution tracking and task planning
Excellent communications skills, both written and verbal
Proficiency with Microsoft Office tools (Word, PowerPoint, Outlook)

DESIRED QUALIFICATIONS:
Active TOP SECRET/SCI security clearance
3 years of experience at an AF Product/Logistics Center, or similar US Army/US Navy Center, assigned to a System Program Office; or 3 years of experience in the AFLCMC Engineering Directorate
Experience with industry standard or DoD operational risk management practices
Familiarity with the RMF as it applies to avionics subsystems
Level II DAWIA Certification in Engineering, Test and Evaluation, Information Technology, Program Management
Experience as an FAA Designated Engineering Representative (DER) or a similar position

TRAVEL: 10%

EDUCATION:
Accredited Bachelor’s Degree in Electrical Engineering, Computer Engineering, Aerospace Engineering, Software Engineering, Computer Science or a closely related field. Applicants with electrical engineering technology, mechanical engineering, operations research, mathematics, or statistics will be considered as well.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift
8:00 AM - 5:00 PM
 
Job Number: 180331
Job Location: Wright-Patterson AFB, OH
Rate: OPEN
Per Diem: Split possible
Overtime: Not specified
Duration: 12/+ months
Start Date: ASAP
Input Date: 07/24/2019
Last Updated: 07/31/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics System Safety Engineer

Description:
We are currently seeking an Aviation Safety expert to fill an opening for a company in Nagoya, Japan. Interested candidates should have previous aircraft or aviation experience as well as 8 plus years of hands on system safety work.

Responsibilities of the Avionic System Safety Engineer

Creation and integration of SFHA/SSA/CMA Avionics Systems.
Technical coordination with aviation authorities including FAA, JCAB and EASA.
Technical scheduling and coordination with suppliers and internal departments.
Other activities related to Safety Assessments.



Requirements of the

4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
8 plus years of experience in Avionics System Safety.
Must have excellent written and verbal communication skills in English.
Previous aircraft or aviation experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Avionics System Safety Engineer

Description:

PDS Tech is seeking an Avionics System Safety Engineer.

Scope of Work


  - Creation of SFHA/SSA/CMA of Avionics Systems
  - Technical coordination with authority
  - Technical/schedule coordination with supplier
  - Technical/schedule coordination with other division in company
  - Other activities related to Safety Assessment

The primary work location will be in Nagoya, Japan. However, engineers may be requested to relocate to Seattle (Washington State, USA).
 


Job Requirements:
​(1) 8+ years of experience in Avionics System Safety
​(2) Must have excellent written and verbal communication skills in English
​(3) Previous Aircraft experience


 
 
Job Number: 1910103815
Job Location: Nagoya,
Duration: 24 months
Input Date: 07/03/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GRTOQA4&URLSource=cjhunter

Avionics Systems Engineer

Description:
• As Senior Avionics Engineer you will report directly to the Avionics Integrated Product Team (IPT) Lead. Candidates shall have in-depth technical knowledge of one or more of the following avionic systems: FMS, Navigation, Displays, EFVS, Communications, Antennae, Radar, Data acquisition, Safety systems, Health monitoring & reporting and Integrated Modular Avionics.

On any given day you might:
• Integrate Avionic Systems
• Establish requirements
• Be responsible for system design and architecture
• Interact directly with suppliers
• Provide technical leadership, mentoring and guidance
• Define traceability to the FARs
• Be responsible for validation and verification of requirements
• Be responsible for system test and certification
• Report Status
• Manage and track mass properties of Avionic Systems during the complete design cycle
• Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention

We're looking for someone who has:
• Bachelor’s degree in relevant field
• 5+ years of experience within the Avionics discipline
• Experience working on aircraft development programs
• Experience with Avionic Systems design and integration
• Demonstrated success developing processes
• Good understanding of Systems Engineering
• Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
• A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.
 
Job Number: 42-033
Job Location: Reno, NV
Rate: DOE, but very competitive
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Avionics Test Engineer

Description:
We are seeking a Test Conductor / Test Engineer for our Avionics System Integration Rig (ASIR). The test rig is a static test bench for all of the Avionics Systems on the aircraft with a simulation host computer to stimulate the systems.  Candidates should have experience and be familiar with how to conduct systems testing on a test bench or static simulator.

This position requires the development and test of Engineering Test Procedures (Test Cards) based on the Engineering Test Spec requirements from the Avionics Design group, and the creation of Test Reports following the tests to document the results.  Test Cards will be created using in-house developed tools however general experience with test card creation is required.  Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.

The primary work location will be in Seattle, WA, USA. Business trips to required sites may be requested, including Nagoya and Moses Lake where engineering tasks (Nagoya) and intensive flight tests (Moses Lake) are carried out.

Scope of Work:
  • Development and test of Engineering Test Procedures (Test Cards) using in house tools.
  • Creation of Test Reports following the tests to document the results.
  • Support investigations and troubleshooting of test rig and/or systems related snags, coming from either the rig test or flight test programs.
  • Support the Configuration Management of the Test Rig
  • Facilities planning,
  • Creation and carrying out of Rig Maintenance Procedures,
  • Test Video Recording & Equipment management,
  • Software Loading following provided instructions.

 
 
Job Number: 1910097155
Job Location: Seattle, WA
Duration: 12 months
Input Date: 01/14/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r7MpQAI&URLSource=cjhunter

Avionics and Electrical Systems- UM

Description:
PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

JOB RESPONSIBILITIES:

This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


 
 



 
Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

 
Education and Experience:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

• Avionics and Electrical System DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

 
 
Job Number: 1910097710
Job Location: Wichita, KS
Duration: 6 months
Input Date: 03/14/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

Avionics/Elec Tech II

Description:
PDS Tech is seeking a Avionics/Electrical Tech II for an open position in Savannah, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions:

  • Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting.
  • Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Performs and complies with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection.
  • Tests and maintains test equipment, electronic systems, and components.
  • Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
  • Adapt to sudden schedule changes. 

Additional Functions:

  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


 


 

Education and Experience Requirements:



  • High School graduate/GED.
  • A & P license, FCC license or NCATT certification preferred.
  • Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • Ability to read and interpret basic blueprints and schematic diagrams.
  • Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written.
  • Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds.



 

  


 


 
Job Number: 1910102788
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/04/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033jFeQAI&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.

 

Unique Skills:



G650 experience preferred.



 


 

 
Job Number: 1910101665
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/30/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fd0QAA&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:
Catia V5 and Solumina preferred not required

 
 


 

 
Job Number: 1910101164
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/16/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0dQAA&URLSource=cjhunter

Avionics/Electrical Tech Sr

Description:

PDS is seeking an Avionics/Electrical Tech Sr. for an open position in Savannah, GA



Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:



  •  Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce.
  • Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems.
  • Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring.
  • Oversees the performance and compliance with engineering changes and modifications as required.
  • Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability.
  • Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented
  • As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time.
  • Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required.
  • Enforces the company FOD program, tool control program, 5-S program and all safety regulations.
  • Maintains required logs and records.
  • Adapts to sudden schedule changes.
  • Coordinates with other disciplines concerning projects. 



Additional Functions:



  • Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system.
  • Self inspection capability for all avionics testing functions in applicable areas.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
     


 


Education and Experience Requirements:
High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC License preferred. Other NCATT preferred. 


Other Requirements:

  • Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs.
  • APU run qualification and engine run qualification preferred.
  • Ability to read and interpret basic blueprints and schematic diagrams.


Unique Skills:
Catia V5 and Solumina preferred not required

 
 


 

 
Job Number: 1910101165
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/16/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e0iQAA&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088612
Job Location: Lexington Park, MD
Duration: 12 months
Input Date: 09/11/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcb7AAA&URLSource=cjhunter

C++ Real Time Software Engineers

Description:
Software Engineers
Positions can be located at multiple sites:
Oklahoma City, OK 73145 / 73150 / 73135
El Segundo, CA 90245

Secret, TOP Secret AND non-cleared positions, at various skill levels

Tasks may include:
  • Lead, Develop and Maintain Code and integrate software components into a fully functional software system.
  • Develop, document, and maintain architectures, requirements, algorithms, interfaces and designs for software systems.
  • Requirements analysis, design, development, test, documentation, licensing, troubleshooting, and user support; custom operating system development; tool design and maintenance; research and development projects; trade studies; risk assessments; and support to software testing.
  • Execution of systems and software testing to verify operational and functional requirements. Assists with test procedures and documenting test results to ensure software system requirements are met.
  • Support software project management and software supplier management functions.
  • Select, tailor and deploy processes and tools; establish metrics.
  • Design, develop, implement, test and document software for surveillance aircraft platforms that enable air superiority by detecting, identifying, and tracking airborne threats and providing operators intuitive battle management controls.
  • Serve as a subject matter expert for software domains, system-specific issues, processes and regulations.
  • Positions include Leads as well as team members in the avionics software organization working closely with other software engineers, systems engineers, other disciplines, customers, suppliers and field service representatives.

 Bachelor's degree in an engineering classification.
 
Experience with any of the following:
  • C, C++, C#, Java, ADA, DXL, Chef, Puppet, Ansible
  • Java Script, Python, shell, Perl Scripting languages
  • Rhapsody, Rational, TFS, ClearCase, ClearQuest, Team Concert, Jenkins, Coverity, Eclipse
  • Real Time, Embedded, ROTS, Doors, Agile
  • Unix, Linux Windows
     

Contact Elisabeth Laspe at 314-482-3991 or elaspe@pdstech.com to discuss these opportunities.
 
Job Number: 1810088609
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 07/18/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisabeth Laspe
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mcanAAA&URLSource=cjhunter

CNC Machine Operator - CA

Description:
Chipton Ross is seeking a CNC machine Operator for an opening in Santa Maria, CA

Responsibilities
Operates computer numerical controlled (CNC) machines such as: milling machines, lathes, turning centers and horizontal mills used for the construction of aircraft interior structural and non structural parts. Aircraft interior parts are cut based on engineering drawings and include floor fittings, aluminum trims, counter tops and other various aluminum, stainless steel and phenolic parts
" Supervises and leads the operation of CNC machines in coordination with the production schedule and at the direction of the CNC Manager.
" Adheres to company and customer specifications, work instructions, engineering prints and work orders.
" Documents the materials and processes used in the process to maintain traceability of product.
" Loads programs into CNC machine and executes program cutting of the material.
" Cuts raw stock according to the necessary size for the part being machined.
" Secures and fixtures raw stock of material into machine, squares material prior to running program if necessary, and monitors the operating of the machine to ensure proper program performance.
" Deburs completed machine parts as time allows.
" Provides feedback to supervisor and programmer as to the performance of the program and tooling used for cutting the material.
" Verifies the accuracy of the parts using calipers, micrometers and other metrology equipment as a periphery inspection.
" Ensures machine and area around machine is kept as clean as practical.
" Operates CNC machine in a safe manner.
" Properly maintains coolant, including removal of containments, proper dilution ratio and cleaning.

Requirements
High school diploma or GED required
3-5 years of experience
Familiarity of the basic operation of CNC machine and the understanding of G and M code is preferred or the ability to learn is mandatory.
Other Skills: Ability to read engineering blue prints is desirable.

Preferred
Degree or diploma from technical/vocational school in CNC machining is strongly desired and most preferred.

Work Schedule
2nd Shift, M-F 4pm - 12:30am

 
Job Number: 175942
Job Location: Santa Maria, CA
Rate: Up to $19.00 DOE
Duration: Temp to Hire
Input Date: 12/19/2018
Last Updated: 09/22/2019
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions:
1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings.
2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods.
3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture.
4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP).
5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions:
1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques.
2. Performs other duties as required. 



 


 



Education and Experience Requirements:

High school diploma/GED.
Two (2) years experience in wood finishing.
Experience in aerospace industry preferred.
Basic knowledge of cabinet finishing processes and products.



Other Requirements:
1. Possess a working knowledge of inspection and process specifications.
2. The ability to read, write, speak, and understand the English language.
3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift.
4. Must be computer literate.





 


 



 
Job Number: 1910104471
Job Location: Savannah, GA
Duration: 6 months
Input Date: 07/18/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTiIQAW&URLSource=cjhunter

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Materials Quality & Airworthiness Expert

Description:
Composite Materials Quality & Airworthiness Expert.

Our Aerospace Client based in China is seeking an expert to assist them with their programs.

Role:

Be responsible for the confirmation of airworthiness factors of composite materials, based on the requirement of airworthiness, improve the existing development path map of composite structure parts, carding the relationship among structure verification, process identification and major milestones.

Responsible for engineering management of airworthiness, improving conformity verification process and establish the system for it.

Responsible for Continuous Airworthiness verification of composite materials, planning and renovate conformity verification specifications, establishing a sustainable operation system for airworthiness.

In charge of establishing the system of composite process identification, renovate the flow and requirements of process capability appraisal, pre-production of manufacturing(PPM), pre-production of verification(PPV), first piece qualification(FPQ).

Be responsible for identifying the key parameters in manufacturing and assembly process of composite structural parts, and establish the evaluation process and system for key parameters.

Responsible for establishing methods and means of critical process control.

Assist in the construction of talent team for composite material airworthiness .


Skills, qualifications and experience desired:


Bachelor degree or above, with more than 10 yrs relevant technical working experience.

Experience in Aircraft manufacturing preferred.

Proficient in the technology of airworthiness certification, process identification, process control, and familiar with AS9100 quality system.

Candidates with experience in verification of composite structure as aircraft manufacturer, or used to be in charge of process appraisal of composite parts, or experienced in process control and supplier quality control.

Excellent writing capability (project proposal, reviewed report etc.)

Overseas working experience is preferred.

Candidates should be prepared to live and work in China for several years.
 
Job Number: BH-3
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 07/18/2019
Last Updated: 08/15/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 07/17/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-45/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

Control System Engineer

Description:

Legacy Engineering, a division of PDS Tech, is seeking a Control System Engineer - Fire Protection System for the Regional Jet Program.



The primary work location will be in Nagoya, Japan. However, Engineers may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed.



The Control System Engineer will work as an Electrical Design Specialist for ATA 26-10 (Fire & Smoke Detection) and ATA 26-20 (Fire extinguishing). This includes all FPS system design aspects and interfaces within the FPS team and all other engineering teams; as well as interfacing with the FPS component suppliers in order to achieve the correctness and completeness necessary for FPS certification in the regional jet program.  



  • Basic work scope is to provide technical assistance to the development and certification of the regional jet program, focusing primarily on FPS performance assessment and optimization.
  • This activity includes:
    1. Prepare and review wiring diagram, electrical interface documents, Perform tests and troubleshooting in the RIG / Aircraft
    2. Support electrical qualification discussions for FPS components.
    3. Have the necessary technical background and competence in the system design as defined in this SOW scope.
    4. As required, conduct interface meetings with the FPS component suppliers.
    5. Prepare FPS design requirement documents, test specifications of type certification tests, test plans and test procedures,
    6. Coordinate with internal members, suppliers and authorities towards executing type certification tests.
    7. Prepare analysis documents, test compliance plans of analysis, and execute tests.
    8. Review supplier TSO and create TSO report
    9. Interface with the flight test team in Nagoya and the Seattle Engineering Office including Moses Lake to follow the FPS system tests conducted. Responsibilities include participating with the FPS team to prepare and/or review responses to flight test problem reports, review of test data and ground and flight test plans and test reports.
    10. Responsible for real-time telemetry monitoring during ground and flight tests, data analysis and documentation.
    11. Perform or assist with inspections and on-aircraft troubleshooting.
    12. Assist with identifying problems, adjusting and repairing systems during the troubleshooting process according to specifications, technical drawings, manuals and established procedures.
    13. Lead resolution of design challenges and any issues relate to aircraft certification.
    14. Act as an interface for the identified FPS ATA with the involved design specialists, FPS system supplier and subcontractors, in particular with the Interior Group.
    15. Be fully involved in supporting the Design Change process and activity.
    16. Perform other related tasks as assigned by the Team Leader.

  • Be prepared to work as a team member in a multi-cultural and international working environment at the Headquarter based in Japan. 
  • The engineer must be able to utilize interpersonal and communication techniques, working in a team environment as well as identifying potential issues with the ability to plan and implement short and long term goals in aircraft development.

  • Work Experience and Skillset:
    1. Each Engineer is mandated to meet the schedule by resolving problems and mitigating risk. Coordinate Interaction with other stakeholders (etc. PMO, SCM, and other engineering teams)
    2. All tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, discussion with relevant parties.
    3. Over 5 years experienced for designated design area.


 
Job Number: 1810094281
Job Location: Nagoya,
Duration: 18 months
Input Date: 10/16/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKRQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Service Engineer for LG and Hydraulic Power

Description:
We are seeking a Hydraulic Engineer with exceptional communication skills to fill an opening with a company in Nagoya, Japan. Interested candidates should have experience with engineering support of an airline maintenance operation as well as strong customer service skills.

Responsibilities of the Customer Service Engineer for LG and Hydraulic Power

Respond to Airlines routine questions with the support of Design Office in reiteration to landing gear and hydraulic systems.
Organize and manage meetings with suppliers to request design changes once required and establish strategy for retrofits.
Act as lead in reporting on events involved with the Continued Airworthiness when an event or an issue may pose a concern to the safety of operations.
Ensure correct flow of information to operators when required. This may include coordination for delivering of Service Bulletin or Airworthiness Directives.

Requirements of the Customer Service Engineer for LG and Hydraulic Power

Experience related to aircraft maintenance support especially with airline operations.
Experience with aircraft maintenance training, aircraft maintenance certifications are a bonus.
Business level English skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 08/06/2019
Last Updated: 08/20/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Definition and Analysis Engineer - Civil Aircraft Operation Scenario

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require a Definition and Analysis Engineer for Civil Aircraft Operation Scenario.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

 
  • Define the method and process for aircraft operation scenario definition.
  • Define the civil aircraft operation scenario database.
  • Define the method and process for function analysis based on scenario.
  • Make the best practise for function analysis based on scenario.
  • Train other engineers in Civil Aircraft Operation Scenario definition and analysis.

Skills/ Qualifications / Experience Sought:
  • Bachelor and above.
  • 10 years experience for aircraft and system design.
  • 10 years experience for civil aircraft operation or research.
  • System Engineering background and especially for function analysis.
  • Be familiar with SysML language.
  • Fluent English with good communication skills.

 
Job Number: BH-63
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 07/18/2019
Last Updated: 08/15/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Delegated Organization Process Specialist

Description:
We are seeking an experienced aircraft certification professional to fill a position for a company in Nagoya, Japan. Interested candidates should have significant experience with process development and/or improvement as well as knowledge of global aircraft certification requirements and compliance standards.

Responsibilities of the Delegated Organization Process Specialist
Engage in continuous improvement of the ADO manual and associated compliance processes in alignment with JCAB regulations and guidance.
Propose and execute on process improvement opportunities.
Work closely with certification management, regulatory affairs, quality assurance, design engineering and JCAB.
Educate impacted parties on system changes and upgrades.
Support changes to JCAB requirements to facilitate all system improvements.


Requirements of the Delegated Organization Process Specialist

10 plus years of experience working in aircraft certification-related fields, preferably in a delegated organization.
Significant experience with process development/improvement
Strong knowledge of global certification requirements and compliance standards.
Experience interfacing with regulators to support certification activities.
Fluent in English, with Japanese language capabilities a bonus.
Previous experience in as an aviation authority employee or delegate is beneficial.
 
Job Location: Japan
Start Date: ASAP
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Delegated Organization Process Specialist

Description:

This role is intended to support development & continued improvement of company’s approved design organization (ADO). This includes ensuring alignment between overall type certification and continuing airworthiness process trees and the work of the delegated organization, as well as review of current delegated organization manual and associated processes to identify improvement areas. When improvement areas are identified, employee is expected to engage with a wide range of internal and external stakeholders to enact process improvement activities, aligned to both company business needs and the primary mission of ensuring a safe and compliance product. Expected to work closely with certification management, regulatory affairs, quality assurance, design engineering, JCAB, and delegated personnel.
 
In this role you will:



  • Engage in continuous improvement of the ADO manual and associated compliance processes in alignment with JCAB regulations and guidance
  • Both propose and execute on process improvement opportunities
  • Align diverse stakeholders and educate impacted parties on system changes
  • As necessary, support changes to JCAB requirements to allow further system improvements


  • 10+ years of experience working in aircraft certification-related fields, preferably in a delegated organization
  • Significant experience in process development/improvement
  • Strong knowledge of global certification requirements and compliance standards
  • Experience interfacing with regulators to support certification agreements
  • Experience resolving cross-functional engineering or process issues
  • Firm understanding of authority & industry roles in rulemaking and compliance
  • Ready and excited to work dynamically in a complex environment
  • Fluent in English, with Japanese language capabilities a plus
  • Previous experience in as an aviation authority employee or delegate is beneficial

 
Job Number: 1910104181
Job Location: Nagoya,
Duration: 24 months
Input Date: 07/12/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GSsOQAW&URLSource=cjhunter

Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Design Engineer

Description:
PDS Tech, Inc. is seeking Design Engineer in Wichita, KS

Development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
II. Apply electrical engineering theory and the operation of electronic test equipment to functionally test and troubleshoot avionics/electrical modules or systems
III. Validate electronic circuit design concepts using SPICE software
IV. Design printed circuit board layouts using Altium design software
 V. Utilize VHDL to modify and maintain Programmable Logic Devices
VI. Utilize ASM and C to modify and maintain microcontrollers.
VII. Support the preparation of engineering certification reports to document system designs that meet the requirements of certification authorities
VIII. Prepare functional test documents to verify proper operation of electronic assemblies
 
• Bachelor’s Degree in Engineering: 

o Preferred- Electrical Engineering 



• Minimum of 6 years of engineering experience or relative aviation technical or systems experience
 
Job Number: 1910104449
Job Location: Wichita, KS
Duration: 12 months
Input Date: 07/17/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTdyQAG&URLSource=cjhunter

Design Engineer ( Clearfield, Utah ) S9271212

Description:
Design Engineer ( Clearfield, Utah ) S9271212
12 month Contract

Pay Rate:$70-80/hr W2

Active Secret Clearance Required

Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.

Experience is design of laminates, sandwich structures, and bonded and bolted assemblies

Top three skills:
Must have an active clearance with an investigation within the last 4.5 years
BS in Engineering with a minimum of 10 years related experience in design engineering function
Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design
 
Job Number: S9271212
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 07/28/2019
Last Updated: 09/09/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Email: timmahaney@talentproconsulting.com
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer-Airframe/Structures

Description:
Bachelors Degree in Engineering required.
Candidates will assist with developing, planning, organizing and conducting complex design assignments on Textron Aviation aircraft. The candidate will perform duties as either an airframe design engineer or a systems design engineer. Airframe design engineers will take responsibility for planning, optimizing, and executing complex aircraft structural design assignments. This will include the support of new product and sustaining designs and require coordination with multiple technical stakeholders.Initiate designs or incorporate design improvements utilizing CATIA software with an emphasis on modeling and drafting, 3D model development in support of detail, assembly and installation layouts. Communicate and coordinate with technical disciplines, such as Manufacturing, Tooling, Structural Integrity, Aerosciences and Utility Systems .Peer drawing checking and the release of engineering documents, as well as day-to-day collaboration to resolve design conflicts and interferences. Support of Space Reviews (i.e. CATIA V6 Model Management/Interference Checks). Support prototype aircraft assembly, which includes coordination with Experimental Engineering to support design interpretation and occasionally investigate and respond to problems in manufacturability. Build prototypes of systems components for testing; set up and run laboratory simulations. Assist in the creation of test procedures and coordination of testing. Create presentations to convey test results, design issues, or trade study recommendations. Support the investigation and response to customer field service issues
 
Job Location: Wichita, KS
Rate: 55-65/hr
Per Diem: Yes
Input Date: 07/30/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Designer, Bleed Air Systems/Vapor Cycle Systems

Description:
PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

General Summary: 

The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
 
Duties and Responsibilities:

  • Prepare 3D layout models of the BAS and VCS.
  • Prepare 3D installation and detail models of the BAS and VCS.
  • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
  • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:



  • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

 
Knowledge, Skills and Abilities:


  • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
  • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
  • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

 
Job Number: 1910096770
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/09/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 09/21/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

Door Design Engineer

Description:
PDS Tech, Inc. is seeking Door Design Engineer in Wichita, KS
  • Candidates will assist with developing, planning, organizing and conducting complex design assignments on  aircraft.
  • The candidate will perform duties as either an airframe design engineer or a systems design engineer. Airframe design engineers will take responsibility for planning, optimizing, and executing complex aircraft structural design assignments.
  • This will include the support of new product and sustaining designs and require coordination with multiple technical stakeholders. Initiate designs or incorporate design improvements utilizing CATIA software with an emphasis on modeling and drafting, 3D model development in support of detail, assembly and installation layouts.
  • Communicate and coordinate with technical disciplines, such as Manufacturing, Tooling, Structural Integrity, Aerosciences and Utility Systems .
  • Peer drawing checking and the release of engineering documents, as well as day-to-day collaboration to resolve design conflicts and interferences.
  • Support of Space Reviews (i.e. CATIA V6 Model Management/Interference Checks).
  • Support prototype aircraft assembly, which includes coordination with Experimental Engineering to support design interpretation and occasionally investigate and respond to problems in manufacturability.
  • Build prototypes of systems components for testing; set up and run laboratory simulations.
  • Assist in the creation of test procedures and coordination of testing. Create presentations to convey test results, design issues, or trade study recommendations.
  • Support the investigation and response to customer field service issues

Required:
o Minimum 5 years aircraft structure and/or mechanical system design experience
o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
o 14 CFR Part 23/25 aircraft door design experience (passenger entry, cargo, emergency exit)
o Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.)
o Aircraft mechanical system design;
o ASME Y14.5 Geometric Dimensioning and Tolerancing
o Preferred: CATIA V6 and Enovia experience 

 
Job Number: 1910101915
Job Location: Wichita, KS
Duration: 12 months
Input Date: 07/26/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gISQAY&URLSource=cjhunter

DrivMatic Operator

Description:
Drivmatic, Riveting, Assembly, Manual

RESPONSIBILITIES:
" Performs a variety of DrivMatic, riveting and structural assembly operations
" Performs structural assembly, riveting and inspection operations of major components and assemblies
" Approves and stamps acceptable assemblies that meet specifications and reject assemblies that do not meet requirements
" Assures quality conformance to company/customer requirements and specifications. Responsible for assuring final quality acceptance of installations, configuration and operational response of mechanical systems, structures, components and controls.
" Adheres to all applicable safety and operational procedures and directives
" Brings to the attention of supervision/lead, and documents all malfunctions, defects and damages of equipment, material and product
" Keeps work areas clean and orderly
" May be required to perform other duties as needed

REQUIRED EXPERIENCE:
" Minimum of 5 years of experience in aircraft sheet metal and/or equivalent structural assembly
" Understands engineering drawings, blueprints, quality procedures and instructions, operation sheet, procedures, work sheets and verbal instructions
" Structural assembly, riveting and inspection operations of major components preferred
" Previous experience operating numerical control (NC) Drivmatic Riveting Machines, manual riveting machines or with robotics preferred

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time


 
Job Number: 179646
Job Location: Stuart, FL
Rate: $20 to $25.00 DOE
Duration: 6+ Months
Input Date: 06/03/2019
Last Updated: 09/22/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

ECS System Engineer - UM

Description:
PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

Job Responsibilities:
 JOB RESPONSIBILITIES:
• Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
• Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
• Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
• Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

EDUCATION / EXPERIENCE:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs



 
 



 
JOB QUALIFICATIONS:
• Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
• Experience with domestic and foreign aircraft certification process is desired.
• Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
• A working knowledge of DO-178 & DO-254 is desired.
• Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Ability to use Reliability Workbench (Fault Tree+) is desired.
• Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

 
Job Number: 1910097709
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 03/16/2018
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L1VAAU&URLSource=cjhunter

Ejection Seat Test Engineer

Description:
PDS Tech is seeking an Ejection Seat Test Engineer in CO Springs, CO.
 
We are looking for a highly motivated individual to join our expanding Ejection Seat Design team located on the front range of the Rocky Mountains in beautiful Colorado.  The Ejection Seat Design team is a dream position for an Engineer wanting work with very challenging requirements, state of the art technologies, advanced materials, cartridges, rockets, computer-controlled devices, subsonic & supersonic aerodynamics, parachutes, aircrew equipment including advanced helmet mounted displays, and the appreciation for saving an aircrew life every few months.
 
The Ejection Seat Test Engineer will support the analysis and testing of ACES ejection seat components and subsystems.  The position will provide engineering deliverables through qualification testing and the initial production implementation.  The individual will propose new technology, create innovative design solutions, support design reviews, work directly with customers, drawing release/review and support testing of the product.




 
Responsibilities:
  • Test Leader for small & medium (<$500K/yr) projects or potentially be the Lead Test Engineer for a subsystem design effort for large ejection seat program project.
  • Successfully executes on test tasks required to develop and qualify aircraft ejection seats.
  • Utilize NX 8.5 CAD and Team Center Product Lifecycle Management (PLM) software to evaluate 3D design models and to facilitate the drafting department in producing drawings
  • Review work submitted from the Global Engineering Center-India (GEC-I) and coordinate with appropriate Engineering Resources.
  • Work as part of a cohesive engineering team and with the Integrated Product Development Team (IPDT) to test various aircraft seating products.
  • Work as part of a cohesive test team testing ejection seats with state-of-the-art anthropometric manikins at ejection velocities from zero airspeed to beyond the speed of sound (800+ MPH groundspeed)
  • Review requirements and evaluate new product test and functionality in support of meeting customer requirements and successful qualification efforts.
  • Facilitate and execute necessary testing to ensure product safety.
  • Interact with Program Management to ensure customer satisfaction.
  • Assist Engineering Management to coordinate the timely delivery of product test and customer proposal requests.
  • Conceptualize and prepare preliminary and final detail test documentation for systems, components, and assemblies.
  • May occasionally design test fixtures, tooling, and aircraft fuselage mounts and undercarriages to mount to our test facility track.
  • Adhere to all rules and codes of conduct.
  • Perform other duties as required.

Skills Required:

  • Ability to visualize, test and evaluate cutting edge mechanical structure, mechanisms, cartridge actuated devices, parachutes, head/neck protection devices, arm restraint devices, leg restraint devices, torso restraint devices, survival equipment, etc. to enable safe ejection that meets the very stringent department of defense expectations for ejection seat performance.
  • Detail oriented and thorough in all assigned tasks
  • Innovative and driven to complete all assigned tasks to the project schedule.
  • Strong customer skills and customer focus (both internal and external customers)
  • Strong analytical skills including strong knowledge of physics, dynamics, and statics.
  • Ability to work independently or as part of an integrated product team.
  • Ability to multi-task with strong organizational skills and prioritize both daily issues and long-term projects.
  • 100% dedicated to following all safety procedures and precautions.
  • Excellent interpersonal skills.
  • Excellent written and verbal communication skills
  • Ability to present test solutions
  • Excellent computer skills, including skill in Microsoft Office applications and the ability to independently learn new software.

Education:

  • Bachelors.

 
Job Number: 1910101206
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 04/17/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e6CQAQ&URLSource=cjhunter

Electrical Avionics Technician

Description:
Chipton-Ross is seeking an Electrical/Avionic Technician for an opportunity in Edwards AFB, CA

RESPONSIBILITIES:
Services, repairs, and overhauls F-22 aircraft electrical systems to ensure airworthiness. Repairs, replaces, and rebuilds aircraft electrical systems. Incorporate engineering changes. Replaces and repairs worn or damaged components. Adjusts, repairs, and replaces electrical wiring system and aircraft accessories.

Work typically requires a detailed understanding of the interrelationships of circuits. Perform such tasks as making circuit analyzes, and tracing relationships in signal flow. Use complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. Work may be reviewed by supervisor for general compliance with accepted practices, may provide technical guidance.

Read and interpret engineering drawings, technical manuals, repair manuals, understanding symbols, flags, and general notes - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders

Regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist.
Work in a safe and efficient manner while maintaining a clean, FOD-free work area.

PHYSICAL REQUIREMENTS:
In order to perform the essential functions of this job, the employee is regularly required to stand, use hands to grasp, handle, and/or feel and reach with hands and arms. The employee is frequently required to walk, climb, balance, stoop, kneel, squat, twist, work overhead, perform repetitive movements, and talk and hear. The employee must regularly lift and/or push or pull up to 20 pounds and frequently lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

REQUIRED EXPERIENCE:
Candidate must have a minimum of 8 years' experience in fighter aircraft electrical maintenance
Knowledgeable of Tool Control, FOD, Supply, HAZMAT, Training, Quality, and Security programs.
F-22 Electrical/Avionic system experience is preferred
F-22 Low Observable materials application (Desired not required)

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 177948
Job Location: Edwards AFB, CA
Rate: $DOE
Duration: 11 months
Input Date: 03/15/2019
Last Updated: 09/22/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer Military Wire Harness

Description:
*This is a full time, 8 month contract, located in Palmdale, CA*



We are hiring for an Electrical Design Engineer specialized in designing and testing wire harnesses and routings for military, especially aircraft. The candidate will be crating wire assembly and harness diagrams, configuring proper routings, working around issues that arise including integration issues, ECOs and last minute changes to specifications. The role will also require that design be self checked by contractor as no Checkers will be assigned to contract. Environment will require heavy interface with production line technicians, engineers, etc. and working with Termination Aids, routing documents and master sketches.



Required:
*9 years’ experience in electrical military aircraft design 3D software.

*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Experience reading and creating electrical drawing schematics for wire harness assemblies

*Wiring implementation and test experience
*Per diem split is available for those travelling for this position
*Active Secret Clearance (and recently investigated within the last 5 years)
*May need to work 2nd and weekend shifts if needed (in addition to 1st shift)



Plus:

*Catia V5 knowledge
 
Job Number: 158
Job Location: Palmdale, CA
Rate: DOE
Per Diem: yes split
Input Date: 07/25/2019
Last Updated: 09/06/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
1) AutoCad required, Catia V5 and CHS preferred. 2) GV,GVI, electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing and routing. 7) Familiarity in mechanical system design 8) Familiarity with aircraft STC procedures preferred. 9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline


The Structures Company is an AA/EOE.
 
Job Number: 318
Job Location: GA
Rate: $55-$63/Hr. DOE
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 07/31/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 4x10
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
1. AutoCad required, Catia V5 and CHS preferred.
2. GV, GVI, electrical system design experience preferred.
3. 14 CFR 25 Subpart H - EWIS experience preferred
4. Part 25 Certification Experience for Cabin Interiors preferred
5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6. Experience with power distribution, lighting, switching, sizing and routing.
7. Familiarity in mechanical system design
8. Familiarity with aircraft STC procedures preferred.
9. Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11060
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Electrical Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Unique Skills:
1) AutoCad required, Catia V5 and CHS preferred.
2) GV,GVI, electrical system design experience preferred.
3) 14 CFR 25 Subpart H - EWIS experience preferred
4) Part 25 Certification Experience for Cabin Interiors preferred
5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
6) Experience with power distribution, lighting, switching, sizing and routing.
7) Familiarity in mechanical system design
8) Familiarity with aircraft STC procedures preferred.
9) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 374101
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 06/06/2019
Last Updated: 09/21/2019
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Duration: 5 month contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and tests Electrical system, components, equipment, and networks for Military air vehicle.
- The applicant must have extensive experience in Wiring Harness Design, Build, and Test.
- Considered a Subject Matter Expert (SME) in the area of Harness Design and Build.
- Experience with System Integration of Hardware in a simulation test environment is desired.
- Able to evaluate electrical wiring and harness assembly diagram for build and integration.
- Candidate will be part of a team effort to develop wiring from design to installation, to include interfacing between Electrical Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to Company Specifications.
- Make real-time design modification to resolve issues, and update design documents to reflect changes.
-Able to work in a Shop (Prototype) environment and with interacting with technicians.

Duties include:
- Creating wiring diagrams and harness assembly diagrams
- Resolving wiring/integration related issues between the various avionics/electrical systems
- Validating/interpreting/troubleshooting/resolving any wiring related issues
- Performing technical checks to ensure wiring document correctness
- Providing engineering sign-off on all new/revised manufacturing wiring documents
- Termination Aids (TAs) and Wire Harness Master (WHM) sketches

Education:
- Level 3: BS + 9-15 years exp. or MS + 7-13 years exp.
- Experience with Design, Implementation and Test experience with aircraft harnesses required.
 
Job Number: 10234
Job Location: Palmdale, CA
Rate: $70.00 - $120.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 04/22/2019
Last Updated: 09/10/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer (2) - SC

Description:
Chipton-Ross is seeking 2 Electrical Engineers located in Greenville, SC

RESPONSIBILITIES:
looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.
The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations.

REQUIRED EXPERIENCE:
Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.
"Must be experienced with Engineering design software for electrical design.
"Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations
"Experience with aircraft architectures and electrical integration of avionics subsystems

EDUCATION:
Accredited Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

WORK HOURS:
Full-Time/First Shift 0630-1600

 
Job Number: 176357
Job Location: Greenville, SC
Rate: $DOE
Duration: 12 MONTHS
Input Date: 04/04/2019
Last Updated: 09/22/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer - Avionics System

Description:
-LOCATION PACIFIC NORTH WEST-
Design, develop and integrate products, tools and or systems
• Perform testing and analysis to validate designs
• Prepare specifications, and assist with the development of processes
• Perform research, and prepare documentation, reports, procedures and tests
• Collect and correlate data, recognizing discrepancies in results
• Perform project execution from conception to completion
• Support portions of projects being performed by co-workers
• Create and update electrical drawings
• Address parts obsolescence and upgrades
• Bachelor of Science degree in electrical engineering from an accredited university (or equivalent experience)
• Catia/CAD proficiency required
• Aircraft design and avionics systems
• General understanding of how systems interact in a small aircraft
• Demonstrated ability to learn new technical areas and skills to support multiple projects
• Ability to consistently demonstrate respect and support of our company vision, mission and values
 
Job Number: 999898
Job Location: PACIFIC NORTH WEST, PACIFIC NORTH WEST
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/07/2019
Last Updated: 09/20/2019
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Electrical Engineer - Clearance CA

Description:
165775
Job Title: Electrical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1708-1
Max Pay Rate: $78.00/hr
Start Date: 7/6/2019
End Date: 1/10/2020
Position Type: Contract


Job Summary:
Looking for world-class talent in engineering to join the 75 year tradition of creating advanced aircraft. This position requires a Signals Intelligence (SIGINT) Engineer to use their technical, program, and systems expertise to design, develop, integrate, and qualify systems for advanced aircraft. The candidate will define specifications, system integration and troubleshooting, and perform aircraft checkout procedures. The candidate must be effective working in team environments, coordinating with multiple engineering disciplines internal and external. Strong verbal and writing skills are essential. The candidate must be able to interact with single or multiple Sensor Suppliers and direct tasking required for successful development and integration of a Sensor System.

Job Description:
i. Provide technical support to customer activities and programmatic processes
ii. Develop documents and briefings to communicate work or study status, brief Program Management as required
iii. Provide task-based schedule and resource forecasts
iv. Subcontract management experience
v. Develop Concept of Operations (CONOPS) for new capabilities and coordinate them across the affected organizations
vi. Assist in the development of system level, functional level and interface requirements
vii. Identify gaps between requirements and acquisition program capabilities being conducted by the customer
viii. Manage the Request for Change (RFC) process as it relates to closing requirement gaps
ix. Work with the enterprise architects to update related design documents to identify, clarify, and track task requirements and issues, remove barriers, resolve minor project issues and escalate to immediate manager where required

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS

Systems integration experience
Avionics Experience

Qty 1 position needed
 
Job Number: JE-1708-1TS5
Job Location: Palmdale, CA
Rate: 78/hr
Duration: 6 months +
Input Date: 07/25/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electrical Engineer / no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.) • Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JE-1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 09/19/2019
Last Updated: 09/20/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Electrical Engineer 4

Description:
Unique Skills:
• AutoCad required, Catia V5 and CHS preferred.
• GV,GVI, electrical system design experience preferred.
• 14 CFR 25 Subpart H - EWIS experience preferred
• Part 25 Certification Experience for Cabin Interiors preferred
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, sizing and routing.
• Familiarity in mechanical system design
• Familiarity with aircraft STC procedures preferred.
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

Position Purpose:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Principle Duties and Responsibilities:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
• Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives
• Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
• Advanced degree in engineering or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-362
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical Systems Design Engineer - Contract AND Direct Position Available

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage

Qualifications

Education, Work Experience, Certification and/or Licensure:
BS in an Engineering related discipline required, Master’s degree preferred
5 or more years of aviation experience with 8 or more years of directly related experience involving design, development and certification of electrical/electronic power systems
Knowledge of FAR Part 23 or 25 regulations
Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
Knowledge of system modeling and analysis tools preferred



The Structures Company is an AA/EOE.
 
Job Number: 320
Job Location: NC
Rate: $125K - $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 08/12/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

Electrical UM (23&25)

Description:
PDS Tech, Inc. is seeking Electrical in Wichita, KS
This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

Job Responsibilities:
• DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
• Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
• Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
• Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
• Maintain a high degree of proficiency in computer applications to accomplish tasks.
• Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
• Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
• Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
• Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
• Reviews and evaluates supplier proposals for potential utilization on future models.
• Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
• Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

EDUCATION:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

JOB QUALIFICATIONS:
• Electrical DER qualifications (FAR 23 or 25).
• Experience with domestic and foreign business and/or general aviation aircraft certification process is required
• Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
 
 
Job Number: 1910098626
Job Location: Wichita, KS
Duration: 12 months
Input Date: 02/20/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

Electrical/Avionic Design Engineers

Description:
PDS Tech Inc is seeking Avionics/Electrical Designers in Wichita, KS

JOB RESPONSIBILITIES:

  • Job Responsibilities:
    • Responsible for integration of supplier avionics equipment into Cessna Citation aircraft.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications.
    • Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Designs aircraft interface wiring, and prepares engineering drawings, reports and other documents.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Coordinates with direct and indirect customers and suppliers to determine system requirements.
    • Consults other engineering and manufacturing personnel to coordinate design and resolve technical issues.
    • Consults with supplier to discuss and remedy issues in a timely and efficient manner.
    • Provides guidance to lower grade engineers in the solution of complex design problems.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Performs above work utilizing frequent application of in-depth engineering principles.
    • Assures supervision awareness of program status, problems and successes.
    • Provides periodic design reviews and update presentations to management of engineering and other company organizations.


 
 



 
Education/Experience:
• B.S. or advanced degree in Electrical Engineering, Computer Engineering, Electrical/Electronic Engineering Technology, or related technical degree required
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 desired
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs

Qualifications:
• Working knowledge of generic CAD wiring design tool processes. Experience in CATIA/CCD, Mentor Graphics, and/or IAI HarnesSys is preferred
• Ability to read and produce wiring drawings using standard industry practices
• Experience with electronic test equipment
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF)/Indirect Effects of Lightning (IEL) installation criteria preferred
• Skills in Microsoft Office suite software
• C/C++ and assembly programming experience preferred
• Visual Programming language preferred
• Excellent written and verbal communication skills
• Strong analytical and problem solving skills
 
Job Number: 1910097705
Job Location: Wichita, KS
Duration: 6 months
Input Date: 02/27/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TMQAY&URLSource=cjhunter

Electro-Magnetic Effects Engineer

Description:
• As Electro-Magnetic Effects (EME) Engineer you will report directly to the Vice President of Systems Engineering / Aircraft level Integration Team (ALIT) and will be responsible for defining the technical requirements relating to all aspects of EME.

On any given day you might:
• Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
• Provide aircraft level EME guidance
• Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
• System design and architecture analysis
• Interact directly with suppliers
• Define traceability to the FARs
• Perform and teach electromagnetic compatibility design and analysis
• Perform computational electromagnetics calculations and assessments
• Validate and verify of requirements
• Provide guidance for System test and certification
• Report Status
• Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
• Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification

We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the EME discipline.
• EME systems design and integration experience
• Aircraft development experience
• Experience Developing EME processes, guidelines and methodologies to support the design of the Aerion AS2
• Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
 
Job Number: 42-035
Job Location: Reno, NV
Rate: DOE, but very competitive
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electro-Magnetic Effects Engineer (EME)

Description:
Perform analysis and design relating to effects of lightning (direct and indirect), surface charging, grounding, structural bonding, circuit isolation, transfer impedance, shielding effectiveness, effects of radiated/conducted emissions and susceptibility, near field/far field electric fields, corona, P-static, etc.
• Provide aircraft level EME guidance
• Establish requirements, processes and methodologies (EMC, EMI, HIRF, LSP, G&B, RF, etc)
• System design and architecture analysis
• Interact directly with suppliers
• Define traceability to the FARs
• Perform and teach electromagnetic compatibility design and analysis
• Perform computational electromagnetics calculations and assessments
• Validate and verify of requirements
• Provide guidance for System test and certification
• Report Status
• Provide subject-matter expert level guidance on both practical and theoretical aspects of the EME systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
• Provide EME guidance to the various Sub-systems and Structures IPTs in support of their development and certification
We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the EME discipline.
• EME systems design and integration experience
• Aircraft development experience
• Experience Developing EME processes, guidelines and methodologies to support the design of the new aircraft
• Demonstrate a clear understanding of industry guidelines and documents (MIL-STD-285, MIL-STD-461, MIL-STD-464, SAE ARP5412, SAE ARP5414, AC 20-53A, AC 20-107, DO-160, MIL-STD-1541, MIL-STD-1757, etc)
 
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 08/09/2019
Last Updated: 09/21/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: tara.gilbert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Environment Effects - E3 - Protection Engineer

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Electromagnetic Environment Effects (E3) Protection Engineer for Design and Verification.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

  • Instruct team members on the review of documents about equipment/system level Indirect Effects of Lightning(IEL)/High Intensity Radiated Fields(HIRF)/EMC compliance verification.
  • Instruct the documentation and verification of system level IEL/HIRF tests.
  • Lead the team to conduct troubleshooting of electromagnetic interference onboard.
  • Instruct aircraft level lighting/HIRF/EMC test verification.
  • Compile aircraft level E3 design requirements.
  • Instruct aircraft level EMC/HIRF/IEL simulation and calculation.
  • Establish aircraft level E3 design and verification procedure.

Skills/ Qualifications / Experience Sought:
 
  • 10+ years' experience in E3 protection design and verification of aviation field and rich experience in type certification.
  • Experience in system level lightning and HIRF verification.
  • Experience in aircraft level E3 design requirement; intensive study in aircraft electromagnetic protection technique.
  • Experience in electromagnetic protection for composite fuselage.
  • Education background in EMC, electromagnetic field and microwave, electronic engineering or other relevant subjects.
  • Familiar with relevant design method and procedure of electromagnetic protection for composite material aircraft. Participated in electromagnetic protection design of relevant type. Civil aircraft project is preferred.
  • Familiar with airworthiness regulations of E3 for civil aircraft. Full participation in the type certification credit procedure desired.
  • Master EM simulation and have experience of aviation program are preferred.
  • Good communication and written skills in English.

 
Job Number: BH-61
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 07/18/2019
Last Updated: 08/15/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics/Avionics Design Engineer

Description:
Successful Candidate will perform Development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
II. Apply electrical engineering theory and the operation of electronic test equipment to functionally test and troubleshoot avionics/electrical modules or systems
III. Validate electronic circuit design concepts using SPICE software
IV. Design printed circuit board layouts using Altium design software
V. Utilize VHDL to modify and maintain Programmable Logic Devices
VI. Utilize ASM and C to modify and maintain microcontrollers.
VII. Support the preparation of engineering certification reports to document system designs that meet the requirements of certification authorities
VIII. Prepare functional test documents to verify proper operation of electronic assemblies

Bachelor’s Degree in Engineering:
o Preferred- Electrical Engineering

• Minimum of 6 years of engineering experience or relative aviation technical or systems experience
 
Job Number: 1910104449
Job Location: Wichita, KS
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/24/2019
Last Updated: 08/22/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 09/20/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer - Lightning Protection - Airframe Structure - China

Description:
Our Aerospace Client based in China is looking for additional Engineering Support . They require an Engineer - Lightning Protection - for Airframe Structures.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Excellent salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Responsibilities:

Give a clear status assessment of the lightning protection technology for the airframe structure, and build corresponding design specifications, workflow and tools.
Leading a team which aims to learn the most advanced lightning protection technology for airframe structures, leading to improving our client's own design capability.

Skills/ Qualifications / Experience Sought:

The applicant should have worked with world class Aerospace Companies for more than 10
years.
The candidate should have over 5 years model development project working experience in the professional field of lightening protection technology for airframe structures.
Candidates who has served as technical manager will be given priority.
Fluent English, with good communication skills.
 
Job Number: BH-54
Job Location: Shanghai, China
Rate: Good Package / Rate - Negotiable
Per Diem: --
Overtime: --
Start Date: 07/17/2019
Input Date: 07/18/2019
Last Updated: 08/15/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Into Service Specialist

Description:
We are seeking an EIS engineer with working experience in commercial aerospace for an Original Equipment Manufacturer (OEM) as well as ample Entry into Service experience. Interested candidates will be responsible for coordinating all the processes, requirements and customer requests related to the Entry into Service of a new aircraft.

Responsibilities of the Entry Into Service Specialist

Coordinate and integrate all the areas responsible for the Entry into service including:
Flight operations engineering and pilots, training support, program management, material and services support and production lines.
Maintenance support and technical publications
Contracts management.
Air safety and certification teams and ground support equipment
Ensuring that the Master Plan agreed upon with the customer is complete following each deadline this includes the follow areas:
Initial Pilot Training
Initial Flight Attendant Training
Pilot Support (En Route Supervision)
Flight Operations Engineering Course (FOEC)
Flight Operations Engineering Support
Pilot Support (Ferry Flight)
RAS or SCAP Module
Inflight Performance Software
Performance SW
Reconfig. of the Flight Operations Publications Set
Dispatcher SW
Flight Dispatchers Course
Balance & Trim Chart
Maintenance Theoretical Type Training (B1 + B2)
Maintenance Practical Type Training (B1 + B2)
Technical Representative
Maintenance Specialists Support
Health Monitoring Training (Basic Module) & CMC Usage
Maintenance Program Start-up and Packaging
Reliability Training
Techpubs Subscription and training
RSPL Budgetary
MPD/MMEL
Suppliers Conference
TC Approval
Aircraft Operator Certificate Operational Approval
Direct Maintenance Cost
MRO Certification
GSE

Requirements of the Entry Into Service Specialist

Working experience in commercial aerospace with an Original Equipment Manufacturer (OEM).
8 or more years experience with Entry into Service for new aircrafts.
Excellent working relationship with airline customers and suppliers.
Knowledge of the aircraft delivery process.
Working experience in customer support industry and supplier negotiation.
Team management skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 09/06/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishing Engineer (TSII)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
• Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
• Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
• Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
• 14 CFR Part 25 A/C Cert familiarity
• Mechanical Systems Engineering experience required. ARP4754A experience desired
• Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
• Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-345
Job Location: Savannah, GA
Rate: $63/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 09/16/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Furnishings Engineer

Description:
Location: Savannah, GA
Rate: $63.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

The ideal candidate for the position should have the following experience but not required:
- Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
- Prior company experience is desired.
- Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
- Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
- 14 CFR Part 25 A/C Cert familiarity
- Mechanical Systems Engineering experience required.
- ARP4754A experience desired

Education and Experience Requirements:
- Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
- 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
- Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
- Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 10701
Job Location: Savannah, GA
Rate: $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/26/2019
Last Updated: 09/18/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com