Job Search Results

428 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/08/20 Monday 02:20AM Pacific Time by ContractJobHunter. )

Listings 1 - 428

Go To My Job Tracker

Expand all descriptions

2393 - EEDA SPECIALIST - cv, word doc only

Description:
Ensure, by design and documentation reviews and process audits, that suppliers of electronic equipment follow established industry and regulatory guidelines, and sound engineering practices, in developing airborne embedded software and airborne electronic hardware (AEH), such that their products are safe and certifiable.

Liaise with Transport Canada Civil Aviation (TCCA) and produce the necessary compliance data, in order to confirm that suppliers have satisfied all certification authority requirements for software and AEH.

Review safety analyses, attend design reviews, review supplier documentation, and conduct audits on suppliers' software and AEH development products & processes. Where necessary, you will advise suppliers on action required to make their processes and products safe and certifiable, and will ensure that corrective action is carried out.

Keep abreast of the rapidly changing technology and processes, in order to develop and maintain best product development practices' and processes' requirements for the EEDA discipline.

Possess, as a minimum, a Bachelor's degree in Engineering with a specialization in Software, or a degree in Software Engineering or Computer Science.

Possess a minimum of 8 years experience in the development or verification of real-time airborne embedded software applications in a variety of aircraft systems (using RTCA/DO-178B or equivalent standard).

You may also have experience in the certification, development or testing of airborne electronic hardware (AEH) according to structured development processes (RTCA/DO-254 or equivalent standard).

For both Software and AEH aspects, you are familiar with industry-recognized Software/Firmware Engineering practices, object oriented design, system safety analyses, ARP4754A and ARP4761, DO-178B, or DO-254.

Have experience of software or firmware requirement and design analysis, of writing and of acting as a peer reviewer of life cycle plans, requirements, designs, code, test cases and procedures.

You are also able to read and critique high-order software coding languages (procedural & object-oriented) or HDL code, as part of the design review activities.

Have working experience in software quality assurance and software configuration management.

Experience with certification authorities' liaison is an asset.
 
Job Number: 2393
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

Assembler A (10) - CA

Description:
Chipton-Ross is seeking10 Assembler A's for openings in Sylmar, CA.

RESPONSIBILITIES:
Performs simple production assembly operations on structural and mechanical assemblies, subassemblies and aircraft systems, equipment and accessories using manual operations. Performs a variety of technical manufacturing production assembly operations where accurate visual acuity and manual dexterity are required to fabricate production solar cell assemblies and solar panels for space applications. Essential Duties and Responsibilities:
- Perform hand soldering, wire harness assembly and component bonding
- Complete administrative functions relating to accurate documentation
- Operates tools and equipment such as wire strippers, crimpers, solder iron, wire identification and associated tools
- Adheres to established company policies and procedures, paying special attention to safety regulations
- Demonstrated experience using a computer to look up and record information (Excel)
- This position requires the ability to work first or second shift
- Ability to read blueprints, schematics, and work instructions
- Familiar with soldering, wire harness assembly and component bonding
- Reliable, mechanically inclined, detail orientated
- Ability to work in a team atmosphere and displays a positive attitude
- Effective verbal and written communication skills

REQUIRED EXPERIENCE:
- Polymeric Application (NASA-STD-8739.1A)
- Soldering (NASA-STD-8739.3)
- Crimp & Wire Routing (NASA-STD-8739.4)

ADDITIONAL EXPERIENCE:
- Experience in electronics and electro-mechanical assemblies
- Experience in manufacturing assembly related work
- Trade skills training or manufacturing experience
- Familiar with Microsoft Applications
- Familiarity with solar cell and solar panel manufacturing processes
- Experience reading detailed assembly drawings and understanding the basics of geometrical dimensioning and tolerance (GDT)
- Knowledge of Lean Mfg. ISO9001 and AS9100 concepts and practices.

EDUCATION:
High school diploma or GED, technical school.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

WORK ENVIRONMENT:
- Work overtime as required
- Must be able to lift a minimum of 35 lbs.
- Must wear a smock, hair cover, and gloves during work
- Excellent manual dexterity to manipulate and move parts and hand tools needed for performing the job
- Requires accurate visual acuity
 
Job Number: 168264
Job Location: Sylmar, CA
Rate: $DOE
Duration: 12 Months
Input Date: 01/30/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Electrical Engineers - Wichita, KS

Description:
STS AeroStaff Services is hiring Aviation Electrical Engineers in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

Responsible for providing engineering design support to Cessna Citation Service Centers in support of complex aircraft alterations. Manage small to large scale certification projects with responsibilities to include establishing systems design requirements, developing and presenting systems architecture concepts, completing systems design, and obtaining certification for the project.

Job Duties:

• Responsible for developing and completing complex engineering designs
• Ensures designs meet or exceed customers’ expectations and Cessna Quality and Safety standards
• Position requires a strong avionics/electrical systems background and the ability to conduct avionics and electrical systems testing both on and off the aircraft
• Works with Service Center personnel in reviewing customer requests for aircraft installations
• Evaluates feasibility of the requested alterations and provides alternate solutions if necessary
• Monitors and researches new technologies and FAA mandates for potential project opportunities to support the aftermarket
• Guides and directs activities to ensure timely and efficient completion of assigned projects
• Development of program schedules outlining key deliverables and establishing time lines for completion of tasks
• Responsible for identifying FAR’s (Federal Aviation Regulations) applicable to any given project and establishing a means of compliance for those regulations

Qualifications:

• Bachelor of Science in Engineering (Electrical/Mechanical) or related field
• An ability to develop wiring diagrams utilizing company electronic drawing tools is preferred

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42332
Job Location: Wichita, KS
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Avionic / Electrical Test Technician

Description:
Avionic / Electrical Test Technicians needed for direct hire long term positions.  
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1710078605
Job Location: Everett, WA
Duration: 24 months
Input Date: 12/11/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023UFLAA2&URLSource=cjhunter

Avionics Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the aircraft.

Previous Garmin experience is required.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.

Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-022
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/02/2018
Last Updated: 08/13/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: Matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
Avionics Technician provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements.
Education:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years’ experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.
 
Job Number: 116864
Job Location: Savannah, GA
Per Diem: Yes
Input Date: 01/19/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rashmi
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Avionics Technician 2

Description:
PDS TECH INC. is seeking Avionics Technician 2 located in Rancho Bernardo,CA.


Summary:

Performs a variety of duties in the electronic, mechanical, or electromechanical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems.
Works from engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

 
Basic Qualifications:
*High School Diploma/GED and a min of 2 year of experience fabricating and testing aircraft electrical wire harnesses.
*Experience reading and working to wiring schematics, blueprints, parts lists, and other engineering documentation.
*Knowledge of Electro-Static Discharge (ESD) and Foreign Object Elimination (FOE) principles and experience working in an ESD and FOE sensitive environment.


Preferred Qualifications:
*Previous certifications for fabricating and testing electrical harnesses per IPC/WHMA-A-620.
*Previous certifications and experience soldering electrical and electronic assemblies per joint industry standard IPC J-STD-001.
*Previous experience with 5S practices and working in a lean manufacturing environment.
* AA Degree preferred.
 
 
Job Number: 1810085210
Job Location: San Diego, CA
Duration: 12 months
Input Date: 04/24/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPTtAAM&URLSource=cjhunter

Biomedical Technician I - NJ

Description:
Chipton Ross is seeking a Biomedical Technician in Moorestown, NJ.

Job Summary:
Perform repairs, inspections, and functional testing to ensure medical devices conform to manufacturer's specifications.

Responsibilities:
-Perform preventative maintenance of medical devices in accordance with manufacturer's requirements.
-Document all service work (hardcopy and electronic).

Requirements:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.
-Minimum 2-3 years of experience testing, troubleshooting, and repairing electronic devices, medical devices preferred.
-Competent with the use of computers and Microsoft Office applications (Word, Excel, Outlook).
-Must be able to work with minimum supervision, follow written test procedures, and complete service reports.
-Must be able to work with hand tools and simple test equipment like multimeters.
-Must be able to lift up to 25 lbs and stand or sit for long periods of time.

Education:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.

Schedule:
-First shift (M-F, 8am-5pm), overtime available during evenings and weekends.

 
Job Number: 169718
Job Location: Moorestown, NJ
Rate: $25.74 to $26.65 DOE
Duration: 2 months
Input Date: 03/26/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Biomedical Technician I - NY

Description:
Chipton Ross is seeking a Biomedical Technician in Westchester, NY.

Job Summary:
Perform repairs, inspections, and functional testing to ensure medical devices conform to manufacturer's specifications.

Responsibilities:
-Perform preventative maintenance of medical devices in accordance with manufacturer's requirements.
-Document all service work (hardcopy and electronic).

Requirements:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.
-Minimum 2-3 years of experience testing, troubleshooting, and repairing electronic devices, medical devices preferred.
-Competent with the use of computers and Microsoft Office applications (Word, Excel, Outlook).
-Must be able to work with minimum supervision, follow written test procedures, and complete service reports.
-Must be able to work with hand tools and simple test equipment like multimeters.
-Must be able to lift up to 25 lbs and stand or sit for long periods of time.

Education:
-Associates of Applied Science in Electronics or Military-equivalent training, Biomedical Technology degree preferred.

Schedule:
-First shift (M-F, 8am-5pm), overtime available during evenings and weekends.

 
Job Number: 169787
Job Location: Westchester, NY
Rate: $25.74 to $26.65 DOE
Duration: 4 months
Input Date: 03/29/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 08/17/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
Summary:
Applies advanced knowledge of principles, theories, concepts and industry practices and standards to plan and write computer numerical control (CNC) programs to define contour path machining of metal and composite parts on automatic machine tools.

Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity that require judgment and ingenuity referring to policies and procedures for guidance. Modifies procedures and identifies new approaches relative to planning and writing CNC programs for automatic machine tools. Work is reviewed for accuracy and adequacy.

Analyzes drawings (electronic and hard copy media), sketches, and design data of parts to determine dimension and configuration of cuts, selection of cutting tools, and machine speeds and feed rates. Determines reference points and direction of machine cutting paths.

Computes angular and linear dimensions, radii, and curvatures, and outlines sequence of operations required to machine part.

Prepares geometric layout using computer-assisted drafting software to show location of reference points and direction of cutting paths.

Writes instruction sheets and cutter lists to guide setup and operation of machine.

Able to proof read and analyze machine code and make amendments to the code as necessary thus eliminating code instruction errors and / or omissions.

Observes operation of machine on trial run to prove programmed instructions.

Ancillary Job Functions and Responsibilities:

This position may provide administrative and technical leadership over other people in the department.

Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.

The Structures Company is an AA/EOE.
 
Job Number: 204
Job Location: Tulsa, OK
Rate: $65.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: 10+ Month
Start Date: ASAP
Input Date: 05/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification Checker III/IV

Location: Canoga Park, CA
Rate: $55-$60/hr DOE
Duration: 6 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 8889
Job Location: Canoga Park, CA
Rate: 55-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Management Analyst

Description:
Configuration Management Analyst

Windsor Locks, CT
1 Year Contract
Pay Rate: $49.79/Hr

1st Shift

Available for US Persons only with skills in Microsoft Word, Access, Excel, PowerPoint. Preferably experienced in DOORS (Dynamic Object Oriented Requirements System).

Responsibilities focus on Engineering Configuration
Management compliant with the requirements of MIL-STD-973, EIA-69 and ISO10007 and drawing requirements of MIL-STD-100 and DOD-D-1000.

Process new drawings, parts lists, specifications, reports for release or record and file. Includes review to ensure the documents have been entered into export tool.

Process red flags, deviations and waivers.

Maintain Engineering Library - filing and archiving.

Work with various IPD Team personnel to develop, finalize, and coordinate engineering changes (drawings, specifications, parts lists) in compliance with Space Systems Windsor Locks engineering procedures and program configuration control plans. This may include scanning, copying, and creating PDF electronic files of documents.

Maintain/create reports for configuration status accounting via engineering database.

Construct engineering parts list in EIS to bridge to JDE (eventually to SAP).

Control Pro/E Model via Creo Windchill or electronic files in Documentum.

Update configuration management metrics and maintenance of CM process visualization board.

Incorporate edits and redlines to Microsoft Word documents and DOORS documents. This includes specifications, procedures, configuration management work instructions, etc., as directed by Configuration Management (CM).

Update CM-controlled Generic Statement of Work (SOW) template and Supplier Data Sheets.

Provide As-Designed reports.

Update standard work.
 
Job Number: 8992
Job Location: Windsor Locks, CT
Rate: 49.79
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 05/09/2018
Last Updated: 07/30/2018
Firm Name: INCONEN CORPORATION
Attention: Rex
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Cost Analyst

Description:
PDS TECH INC. is seeking Cost Analyst located in Menlo Park,CA.
 

Summary:
We are looking for a Cost Analyst with knowledge in supply chain, operations, finance and accounting to support the Operations team for timely and accurate review of all aspects of product cost analysis, including material cost, spending and production performance data. The role is expected to support the team in the following functions:



  • Collect cost information from each manufacturing partner, organize them in a systematical way and drive business insight.
  • Analyze the cost information from our manufacturing partners as well as general market information for better cost management strategy.
  • Facilitate potential business transactions including rebate, buy/sell and consignment.
  • Track spending at each partner and other key performance metrics.

Qualification



  • 3 or more years of experience in supply chain management, finance or accounting in consumer electronics industry
  • Solid/ Advanced knowledge of MS office, especially Excel and PowerPoint
  • Experience in Agile or other PLM system is preferred
  • Well organized and attention to detail
  • Excellent communication skills and ability to work with multiple internal teams





  • BS/ BA in Finance, Accounting or Operations

Languages:
English Read Write Speak

Attachments: 


p
p
spacer


p
ppcollapse Skills and Experience
pp
p

Skills:

Required



  • FINANCE
  • MS OFFICE
  • POWERPOINT
  • COST MANAGEMENT
  • OPERATIONS


Additional



  • SUPPLY CHAIN
  • SUPPLY CHAIN MANAGEMENT
  • CONTRACT MANUFACTURING
  • MANUFACTURING OPERATIONS
  • MICROSOFT EXCEL
  • MICROSOFT OFFICE
  • MICROSOFT POWERPOINT
  • OUTSOURCED MANUFACTURING

Languages:English( Speak, Read, Write )
Minimum Degree Required:Bachelor's Degree



 
Job Number: 1810084822
Job Location: Menlo Park, CA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jiji John
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNjaAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV URGENT CA

Description:
161675/8206731 (7812987)
Job Title: Creo Product Definition & Verification Checker III/IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** 10 years as a drawing and model checker for Aerospace mechanical hardware**



** Strong proficiency using GD&T per ASME Y14.5 **



** 5-10 years Creo and Windchill PLM System **





Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.



40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.



30% - Performs design calculations to validate any phase of design requirements.



20% - Estimation of resources and schedule required to complete a design activity and training to staff.



10% - Provide technical guidance to less senior CAD designers and to design support personnel.



Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.

-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).

-ASME Certification in GD&T is a plus.

-Ability to read and interpret product definition and related specifications.

-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.


Skills:
Required
GEOMETRIC DIMENSIONINGCREOGEOMETRIC TOLERANCINGWINDCHILLAEROSPACE
Additional
PACKAGING ENGINEERINGHARNESS CABLING

State/Province: California
City/Town: Canoga Park

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8206731
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 05/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DESIGN VERIFICATION ENGINEER

Description:
Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

KBRwyle is seeking an individual to perform analog verification and research of advanced analog mixed signal integrated circuit blocks. The applicant must be familiar with analog, RF and mixed signal design/fabrication and the associated EDA design tools. Other duties may include designing test articles to evaluate security principles. The selected applicant will represent KBRwyle and DoD customers in outside discussions and technical forums. This position will require some travel. The selected candidate will meet eligibility requirements for a DoD a security clearance.

Required Skills & Experience
An MS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required. A strong understanding of design principles, parasitic interactions, and post-fab test is required.

Desired Skills and Experience
Additional experience in digital circuit design is desired. Familiarity with advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is desired. Familiarity with at least one (1) commercial scripting programming language such as PERL or Python is desired.
 
Job Number: KM0013
Job Location: Dayton, OH
Rate: OPEN
Input Date: 05/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Design Checker reports to the Engineering Manager the Design Checker is Responsible for checking and verifying engineering drawings and related documents to ensure accuracy, completeness, quality and use of design standards where work is of a complex nature by performing the following duties.

JOB RESPONSIBILITIES

• Verify engineering drawings to best practices and standards.
• Works with engineering personal to resolve discrepancies.
• Redline drawings in electronic format and communicates back to engineering team.
• Must be able to work independently and as a team
• Performs other related tasks as required.

• Must have a solid understanding of Microsoft offices including excel, word, and outlook.
• Must have the ability to read 3D models, drawings, and Bill of Materials
• Must have excellent communication skills
• Associate’s degree (A.A.) or equivalent from two-year college or technical school and 2-5 years of experience or seven plus years related experience and/or training

• Familiarity with NX9
• Familiarity with Teamcenter engineering
• Familiarity with aerospace standards
• Familiarity with Adobe Reader
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Electrical Systems Design)

Description:
Design and Analysis Engineer 4

Location: Everett, WA
Duration: 3 months

Job Description:
Generic Statement of Work:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work:
777X Air supply, support of Qualification testing (coordination between Client Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07302
Job Location: Everett,, WA
Input Date: 04/30/2018
Last Updated: 06/04/2018
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 08/19/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER - Midwest, OK

Description:
This position will support our Air Traffic Control and Landing Systems (ATCALS), B-1 and B-52 customers, by solving electrical sustainment issues. The sustainment projects address obsolete components in multiple instrumentation, control, power, electronic, electro-mechanical interface systems. The engineer will:
• Provide technical solutions
• Diagnose malfunctions in existing components and make improvements or modification to produce the desired results
• Develop technical documentation and publications relating to users, systems, processes, work flows, operations, products, and services.
• Create new electrical schematics
• Ensure proper system artwork generation
• Implement design changes of existing components
• Write engineering change orders
REQUIREMENTS
This position requires a Bachelors in Electrical Engineering. The candidate must have good oral and written communication skills. The candidate must have the ability to obtain a security clearance.
PREFERRED SKILLS
Aerospace, DOD or ATCALS experience are definite pluses. The ideal candidate will have experience with circuit design, signal/power analysis, instrumentation, EMI/radar and programming skills. Skills in SolidWorks Electrical and NI Circuit Design Pro are also preferred.
 
Job Number: KM0012
Job Location: Midwest, OK
Rate: OPEN
Input Date: 05/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER III - ELECTRONIC DESIGN

Description:
Johnson Service Group is currently looking for an Electrical Design Engineer for a Temporary position with our Customer in Warrendale, PA. through 2018

The Electrical Design Engineer will be responsible for design, layout, testing, and evaluation of electrical and electromechanical devices and systems. They will work as part of a multi-disciplinary product development team to assess customer needs, generate and analyze concepts, create requirements and specifications, and perform formal risk assessments. They will design parts and sub-assemblies, participate in cross-functional design reviews, and support the transition of projects from development to manufacturing and field service. They will create schematics, wiring diagrams, system diagrams and PCB layouts as well as check drawings to ensure they meet specification and follow best industry practices. Most importantly, the EE exhibits the desire and ability to collaborate, and excels in teamwork and communication. Our Customer is all about continuous improvement, and this professional thrives in such an environment.



Essential Functions:

Responsible for the design, and analysis of complex level electrical systems, equipment and PCB assemblies.
Conduct feasibility studies of new and modified designs exercising judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criteria.
Work on complex multi-product level problems where analysis of situations or data requires an in-depth evaluation of various factors.
Direct support personnel in the preparation of prototype fabrication.
Participate in multi-disciplinary technical teams to research, develop, test and evaluate solutions.
Evaluate issues and failures to determine root cause and potential solutions
Work on intermediate level component and subassembly problems where analysis of situations or data requires an in-depth evaluation of various factors.
Collaborate with software, mechanical, testing and other cross functional teams to perform FMEAs and risk assessments.
Mentoring and coordination of other engineers.
Direct support of customers, to include travel to off-site locations as necessary to evaluate field issues.
Educational Requirements:

BS degree in Electrical Engineering or equivalent
Required Knowledge and Skills:

4+ years of Electrical Engineering experience
Experience the electrical and cross functional aspects of a formal product development environment including schematic capture, PCB development, Bill of Materials, MRP systems and associated tools (including Orcad or Altium).
Demonstrated experience designing electrical and robotic subassemblies and systems
Understanding of architectural design concepts of machine controls and I/O systems
Able to effectively solve problems, work independently on system level designs and multi-task as required.
Good interpersonal and communication skills
Self-starter, capable of working independently as well as building strong cross functional collaborative relationships.
Must be able to work in a team environment and assist cross functional teams with the debugging of complex issues.
The candidate must be highly motivated to work in a fast-paced environment.
Strong written and verbal communication skills.
Proficient with the Microsoft Office Suite of Products.
Must be legally authorized to work in United States
Preferred Knowledge and Skills:

Familiarity with PCB development including footprint generation and PCB layout a plus.
Familiarity with motion controllers, servo- and stepper- motors, and networked I/O systems a plus.
Experience with Product Lifecycle Management (PLM) tools and ECR, ECO processes.
Experience in LabView
Working experience with FDA regulated, ISO13485, or other highly regulated environments.
Work Conditions:

Office Environment
 
Job Number: 364448
Job Location: Warrendale, PA
Per Diem: Possible
Overtime: Possible
Duration: 12/2018 +
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Performs design and drafting of both electrical and mechanical aspects of electronic equipment. Lays out printed circuit boards; designs wiring harnesses; performs layout drawing and checking of schematic diagrams as supplied in rough form by electrical engineering; makes wiring diagrams from schematic diagrams (vice-versa). Performs overall chassis and housing design/drafting, including overall system packaging. Designs front panels, chassis, brackets, card cages. Assists in selection of components such as connectors, terminals strips, switches. Produces schematic diagrams and/or CAD drawings for submission to customers, plant, operations or outside vendors to produce the specified wiring harnesses, printed circuit cards, mechanical support to batteries, LRU and generating elements specified to assemble a complete electronic device. Output must be able to be entered directly into data management configuration control.
 
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Engineer

Description:
JOB SUMMARY
Reporting to the Engineering Manager the Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided
JOB RESPONSIBILITIES
• Electrical Engineer applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience.

• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/09/2018
Last Updated: 08/17/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
- Military ground vehicle wiring harness and cabling design experience - Experience working with electrical/electronic systems of military ground vehicles
- Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
- System, subsystem and component specification development and the process to verify specifications
- Low voltage (28Vdc) power distribution and management (Solid State Power Controller/Programmable Power Controller)
- Vehicle Signal management (Sensor/Transducer Input/Output signal management)
- Smart Display Unit
- Working knowledge of military electrical connectors and electrical cabling specifications
- SAEJ1939 CANBus, Mil-Std – 1553, 10/100 and Gigabit Ethernet Protocols
- Integration of military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
- Responsible for technical decisions, which may impact project completion.
- Specify and design components from system, subsystem, or configuration item requirements and demonstrate through modeling, simulation and analysis or test that these requirements are met.
- Prepares engineering documentation (specification, ICDs, design documents, and technical/test reports) and complete technical data packages.
- Prepares cost estimates and schedules for assigned electrical design projects.
-Prepares Change Notices, Engineering Change Proposals and Engineering Orders as required to complete assignments.
- Monitors procurement, manufacturing, and delivery of components through purchasing and manufacturing departments to ensure that schedules are met.
- Guide drafters and designers in creating clear and releasable documents.
-Provides regular status reports to supervisor, project engineer, and customers as needed.
 
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 05/08/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Electrical Engineer

Description:
The Electrical Engineer will perform electrical engineering activities in accordance with client work instructions and procedures.  This position is to support work ongoing at the client facility.  This position will work in the following capacity:

Position will support engineering development within the Electrical Engineering group.  The position requires the ability to design, analyze and troubleshoot circuits, read/update schematics, and test circuit card assemblies. A working knowledge of electrical design and schematic capture tools and P-Spice is required.

The Electrical Engineer will perform electrical engineering activities in accordance with work instructions and procedures.  This position is to support work ongoing at the  facility.  This position will work in the following capacity:
  • Support electrical design activities to incorporate additional electrical functionality into existing electronic systems used in precision guided munition electronics.
  • Create the needed artifacts to support the electrical engineering documentation and release; artifacts can be used as evidence to substantiate the execution of processes.

Basic Qualifications
  • Bachelor Degree in Electrical Engineering, and/or equivalent proven experience
  • Critical Thinker & Able to offer Value Added Solutions
  • 6 years or greater in an engineering role
  • Schematic Capture (preferably Mentor Graphics) and P-Spice experience beyond a basic level
  • Proficient with standard electrical lab test equipment
  • Basic knowledge of Matlab, MS Office and MS Visio

 
Additional Qualifications
  • Experience with  engineering tools such as Subversion, requirements documents, and requirements based electrical design
  • Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department
  • Familiarity with gun hardened electronics design a plus

Skills:

  • Proficient in communicating in English Language
  • Strong Communication and Interpersonal Skills
  • Strong Analytical and Problem Solving Skills
  • Strong Computer and Web Navigation skills

 

 
 
Job Number: 1810079814
Job Location: Vergennes, VT
Duration: 12 months
Input Date: 04/25/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eH6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Secret Clearance REQUIRED

Description:
Government Contract - Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs

ROLE AND RESPONSIBILITIES
Provide electrical engineering support to Research, Development, Test and Evaluation (RDT&E) programs for military aircraft/weapon systems, including planning, directing, and/or participating in aircraft and laboratory testing. Prepares procurement specification inputs, interface drawings, installation design packages, and calibration procedures to accommodate unique test requirements. Oversees systems modifications, installation, integration, and checkout functions. Performs test planning, data collection, and test data analysis. Functions entail providing support for electrical power quality testing and evaluation, including voltage and frequency transients/modulation, voltage distortion, and power interruption on various aircraft, shipboard, ground vehicle, and vendor prototype components and equipment. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Projects will interface test articles with programmable power supplies and data acquisition equipment to conduct power quality tests, followed by analysis of test article responses for compliance with MIL-SPECS/MIL-STDs. In particular, candidate must have experience with Interface Standards for input power to military and aircraft contained in MIL-STD-704, military vehicles contained in MIL-STD-1275, and FAA RTCA DO-160. That experience must also include interpreting guidance for test procedures specified in MIL-HDBK-704 parts 1 through 8. Position also requires knowledge of test planning, data collection, data analysis, test report writing, and presentation of results. Further requirements include specialized knowledge and experience in the design, installation, operation, calibration, maintenance and repair of power quality test facilities, associated equipment, and their control systems. Duties may include performing other tasks for propulsion and power as directed.

Candidate must be able to obtain/retain a Secret level DoD security clearance, and may be required to perform other tasks on an as-needed basis. Position is located in Patuxent River, MD.


REQUIREMENTS
Education: Bachelor's Degree in Electrical Engineering (EE) from ABET accredited university required with a minimum of 8 years' experience supporting RDT&E to include 6 years performing functional aspects as described in the roles and responsibilities.
Master's Degree in Electrical or other Engineering related discipline a plus.

Experience: Experience working with research, development and testing with respect to requirements and characteristics of propulsion and power equipment performance.
Experience must include conducting tests to generate extreme power conditions meeting specification for standardized test regimes then conducting performance tests of electronic and electrically-powered equipment after exposure to test conditions.
Applying test conditions to include extremes with respect to voltage, frequency, modulation, distortion, and other characteristics.
Performing tests post exposure to extreme conditions to verify operation remains within specification and the equipment continues to function reliably in-service.
Experience with MIL-STD-704, MIL-STD-1275, and FAA RTCA DO-160 required.
Must have demonstrated experience directing, monitoring, and/or participating in the installation, configuration, calibration, and operation of engine test systems, environmental chambers, associated instrumentation, and/or data acquisition systems used for testing propulsion and electrical power systems.
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.


Knowledge, Skills and Abilities:
The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.
Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs.
Applying analysis and test methods demonstrating equipment compliance to power characteristics.
Ability to develop test plans, design test equipment, establish protocols and procedures specific to individual test articles following guidance provide in DoD, FAA, and other documents.
Knowledge in applying programmable power sources with appropriate software and firmware needed to generate waveforms specified by test standards.
Knowledge of MIL-STD-704 and the eight parts of MIL-HDBK-704 for aircraft systems.
Knowledge of MIL-STD-1275 for Military Vehicles.


Equipment and Machines:
Ability to operate office equipment such as personal computer, printer, copy machine, telephone, fax machine and other equipment including desk supplies and other work related tools as required.
Ability to operate power test systems to include programmable AC/DC power sources, power analyzer, test management and control systems, laboratory measuring, environmental chambers and other equipment required to provide test conditions, manage test sequences, and perform measurements of test parameters.
Ability to perform or facilitate calibration and repair of laboratory testing and measurement systems.


Attendance: Monday-Friday. Regular attendance of scheduled hours is extremely important, but not critical, except for deadlines and meetings.
Punctuality and regular attendance are necessary to meet deadlines.
Must exhibit flexibility of work hours to adjust to surge situations based on critical mission requirements that may require evening and weekend hours.
Must demonstrate professional behavior at all times when dealing with customers, management and co-workers.
Must have clear, concise and accurate communications skills, both verbal and written.
Grooming and dress must be appropriate for the position and must not impose a safety risk to employees or others.
Must maintain a positive work atmosphere by behaving and communicating in a professional manner.
Independent personal transportation to work site is required.
Some travel is required to support projects; this may involve airline travel.
Power quality testing will typically be performed in a laboratory environment.
Some test protocols may require testing in the field and potentially in a shipboard environment.

PREFERRED SKILLS
Prior DoD acquisition work experience is preferred. Familiarity with NAVAIR Propulsion and Power Laboratories and related competencies also preferred.

ADDITIONAL NOTES
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

Special Requirements/ Certifications:
Candidates must be a U.S. Citizen 
 
Job Number: 18-17413
Job Location: Patuxent River, MD
Rate: $40-45/hr
Per Diem: SPLIT
Overtime: Possible
Duration: 3 Month Contract-TO-Hire
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer/PCB Design Engineer

Description:
--STEPPER MOTOR EXPERIENCE REQUIRED--

Senior electronics designer with a solid electronic product design skills used in complex electromechanical projects involving maintenance of life of on-market products. May lead small teams of engineers in the completion of project goals. Full responsibility of the design from concept through prototyping and leading into integration in final production line. Must have the technical ability to oversee and guide staff towards the completion of project goals. Applies familiarity with the FDA’s guidance on medical device development to ensure compliance.

Provide Core Electrical Engineering expertise:
a)Circuit design and analysis skillset, including in-depth understanding of technologies currently used in the industry.
b)Analog and digital circuit design
c)Expertise in computer-aided electrical design tools (eCAD)
d)Testing circuit performance
Use experience in board level (PWA) manufacturing and current practices, including
a)Analyzing component specifications and creating internal specifications as needed
b)Interacting with new and existing vendors and managing vendor relationships
c)Managing eCAD outputs per customer practices and ensuring that customer designs are properly executed by external contract manufacturers in support of R&D activities.

About Enea
Enea is a global supplier of network software platforms and world class services, with a vision of helping customers develop amazing functions in a connected society. We are committed to working together with customers and leading hardware vendors as a key contributor in the open source community, developing and hardening optimal software solutions. Every day, more than three billion people around the globe rely on our technologies in a wide range of applications in multiple verticals – from Telecom and Automotive, to Medical and Avionics. We have offices in Europe, North America and Asia, and are listed on Nasdaq Stockholm. Discover more at www.enea.com and start a conversation at info@enea.com.
 
Job Number: 575
Job Location: Chicago, Il
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 year
Start Date: April 23, 2018
Input Date: 05/02/2018
Last Updated: 05/18/2018
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Walter Walonoski
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Manager

Description:
Electrical Engineering Manager needed for an immediate full time opportunity with our client in Burlington MA. As a key contributor you will serve a dual-role taking on technical engineering responsibilities and manage, mentor and develop a small staff of electrical and firmware engineers. Please apply below and call me today for immediate consideration. Thank you.



James St. Pierre - Branch Manager - Nesco Resource, LLC - 603.417.3001 - jstpierre@nescoresource.com



Key Responsibilities and Activities


  • Provides electrical engineering recommendations and technical support on electrical engineering reviews, strategic plans, and projects

  • Assists with allocation, budgeting, resource planning, and scheduling

  • Manages unit and development cost estimations and helps determine affordable and reliable material sources

  • Ensures on-time product development by collaborating with other leaders to estimate reasonable and precise schedules and solve problems quickly

  • Streamlines production while meeting compliance and safety guidelines

  • Creates production, quality validation, and evaluation requirements and tests and troubleshoots production dilemmas

  • Establishes technical standards in reviews, documentations, and designs


Required Skills and Experience


  • Bachelor\'s Degree in Electrical Engineering with 7+ years\' experience in the automotive, aviation, or robotics industry

  • Experience with multiple hybrid and electric vehicle electronic architectures

  • Experience with CANbus

  • Experience with schematic capture and PCB layout using modern EDA tools

  • Experience with automotive, robotics or aviation/aerospace wiring harness and connector component sourcing

  • Experience with automotive, robotics or aviation/aerospace product development

  • Experience with design control and change management techniques


Desired Skills and Experience


  • Master\'s Degree in Electrical Engineering or related field

  • Knowledge of Embedded coder, Simulink, autocode generation process, RTE generation, and bootloaders

  • Familiarity with the ISO 26262 specification




 
Job Number: 18-13443
Job Location: Woburn, MA
Rate: 140000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-23 00:00:00.0
Input Date: 04/04/2018
Last Updated: 05/18/2018
Firm Name: NESCO RESOURCE
Attention: James St Pierre
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers - Many Needed

Description:
Must have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement.
. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD

Email resumes to: mmccarthy@pdstech.com
 
Job Number: Electrical-Gulf
Job Location: Savannah, GA
Rate: $60.00-$63.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electrical Project Engineer

Description:
Electrical Project Engineer

Company: UTAS
Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 12 Month W2 Contract
Shift: First
Openings: 1
Travel: Potential travel of 1 trip per quarter.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*NO RELOCATION COMPENSATION**

Description:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details
-We are now looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer.
-You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle.
-Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.
-Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.
-Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
-Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.
-Project Management Professional training is a plus.

Requirements:
-Bachelors degree or higher
-Strong project/program management experience
-3-7+ years of electronics design/testing
 
Job Number: 8921
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 04/13/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analysis Engineer V - (AZ)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

Avionics Systems Engineer responsible for avionics software/hardware integration on the Apache Area Weapon System (AWS). Responsibilities include complex avionics development activities including pursuing advanced technologies, performing trade studies, developing technical approaches, decomposition, flowdown and traceability of system and software requirements, and system/subsystem verification testing. The purpose of the work is to perform gun scoring and analysis. Will be a member of a cross functional integrated product team. Responsible for close coordination with US Army and international customers to ensure implementation is responsive to requirements, using appropriate project integration methodologies, and project management practices. Work with customers to develop and document complex electronic and electrical system requirements. Analyze and translate requirements into system, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Monitor supplier performance to ensure system integration and compliance with requirements. Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Research specific technology advances for potential application to company business needs.

The ideal candidate must be able to design, develop, test and present complex electrical and networking systems that utilize sensor technology. Exposure to missile, gun, or rocket technology is highly desired. Control theory expertise desired.

Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEaz
Job Location: Mesa, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Technician

Description:
The Technician will support engineering activities in accordance with SIS-VT work instructions and procedures.  This position is to support work ongoing at the SIS-VT facility.  This position will work in the following capacity:
  • Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
  • Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
  • Participate on project teams.
  • Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
  • Structure modifications to programs w/ Labview or other SW packages/programs.
  • Design simple circuits, fixtures, or mechanical parts.
  • Provide technical solutions to engineering.
  • Participate on safety initiatives.

Basic Qualifications
  • Production assembly experience preferred.
  • Must have experience troubleshooting and the ability to interpret schematics.
  • Must have good mechanical and/or electronic (analog and digital) repair capabilities.
  • Must be highly motivated and dedicated to exceeding customer expectations.
  • Associate’s/Technical degree and/or equivalent proven experience.
  • Critical thinker & able to offer Value Added Solutions.
  • 1-5 year’s experience.
  • Proficient with standard electrical lab test equipment.
  • Basic knowledge of MS Office, and preferred experience in Matlab and MS Visio

 
Additional Qualifications
  • Experience working with  requirements documents, and requirements based design
  • Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department
  • Familiarity with gun hardened electronics design a plus

 
Skills
  • Proficient in communicating in English Language
  • Strong Communication and Interpersonal Skills
  • Strong Analytical and Problem Solving Skills


 
 
Job Number: 1810079816
Job Location: Vergennes, VT
Duration: 12 months
Input Date: 04/25/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eHGAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Major purpose:



General duties expected of a technician to include test, troubleshoot, repair, modify, and inspect product maintained in the shop to component level. Products include a mix of analog, RF, and digital circuits across through hole, surfacemount, and Ball Grid Array technologies. Must be proficient with PCs to operate with multiple data bases, M/S Office applications, and Automated Test Equipment. Will routinely use general purpose and specialized test equipment including multimeters, Oscilloscopes, Signal Generators, Power Meters, Network and Spectrum Analyzers.Additional Job Requirements:



Applicant at a minimum must meet the requirements for the classification of Technical Associate II. Minimum qualifications for this position are an AA Degree in electronics or equivalent combination of schooling plus experience in an applicable environment. Preferred candidate should have knowledge of electronic theory relating to RF transmission, receiver circuits, analog and digital circuitry. Ability to troubleshoot RF circuits with working knowledge of spectrum analysis, coax cable measurements and calibrations is required. Prior experience in the procedures, practices, inspection methods, materials, and equipment used in maintaining TCAS and Transponders and/or experience working within an FAA Part 145 Repair Station or Part 21 Production Approval Holder highly desired. Candidate must comply with DOT(FAA) drug and alcohol screening requirements.
 
Job Number: 18-14748
Job Location: Phoenix, AZ
Rate: 24.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-03-29 00:00:00.0
Start Date: 2018-03-26 00:00:00.0
Input Date: 04/12/2018
Last Updated: 06/05/2018
Firm Name: NESCO RESOURCE
Attention: Samir Nye
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer III- (HB)

Description:
- Developing electronic and electrical flight control system solutions
- Participating in modification projects for flight control hardware and software designs based on platform requirements
- Executing systems and software testing to verify operational and functional requirements
- Managing hardware/software suppliers' performance to ensure customer requirements are met
- Supporting resolution of product integration & field operation issues
- Researching new technologies for potential application to C-17
- Developing solutions to technical problems of safety of flight scope and impact
- Applying solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets
- Integrating into teams and collaborating with multiple engineering disciplines in solving moderately complex problems concerning fielded airborne avionics and flight control (AFC) systems, involving both hardware and software.
- Participate in full lifecycle projects to develop functional and interface requirements; design hardware, software and interface specifications; test and validate to ensure system designs meet operational and functional requirements; assist in monitoring supplier performance to ensure system integration and compliance with requirements
- Work with customers and their representatives to obtain feedback for product enhancements and corrective actions.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEIIIHB
Job Location: Huntington Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/11/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Must be able to obtain a Security Clearance.

We are seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues

An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29919
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Electronic Systems Design & Analysis Engineer IV - (WA)

Description:
Generic Statement of Work: Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

Specific Statement of Work: 777X Air supply, support of Qualification testing (coordination between Boeing Electrical AR and supplier around Qual test procedure review/approval, Qual failures/root cause, Qual reports/analysis/similarity…), DMDT inputs, Paper ICD, FSD, Slate, and Certification documentation.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEIVWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 04/30/2018
Last Updated: 06/22/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Assembler

Description:
Under limited supervision performs a wide variety of tasks through verbal or detailed instructions in support of a manufacturing/production environment with no instructions needed on routine work, and general instructions given on new lines of work or special assignments.
Duties include assembly, disassembly, re-assembly, fabrication, minor repair and/or minor rework of surface mount and/or through hole printed circuit card assemblies, sub-assemblies, and/or electro-mechanical assemblies.
RF experience is a plus. Duties include (but not limited to) board and/or component preparation, touch up, manually soldering components.
Performs modifications or upgrades or removal of and/or replacement of standard electro-mechanical, surface mount, through hole components.
May perform in-process self checks on items prior to submitting to formal inspection and/or test personnel. Works with electronic/electrical hand tools using drawings, wire lists and technical repair standards.

Hourly Rate: $17
 
Job Number: KM0010
Job Location: Chesapeake, VA
Input Date: 04/27/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Design Engineer

Description:
Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Duration: 6 month contract position
Schedule: 9/80

**Candidates must be U.S. Citizens**

Duties:
- An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.
- Additional duties include investigation of discrepant hardware and test anomalies.

Skills:
Required:
- Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
- Proficiency with Creo Parametric 2.0 Cabling and Intralink.
- Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
- Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
- Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
- Compliance to quality and safety policies at all times!
- Must be a US Citizen
- Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.

Desired:
- Experience with design of flexible and semi-rigid RF cables

Education:
- Must have at minimum a Bachelor of Science degree in an Engineering related discipline.
 
Job Number: 8769
Job Location: Orlando, FL
Rate: $50.00 - $55.00/HR
Per Diem: Per Diem Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/15/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromechanical Design Engineer FL

Description:
161672/7809667
Job Title: Electromechanical Design Engineer

Number of Positions: 1

Remaining Positions: 1

55/hr max

Duties:
** Candidates must be U.S. Citizens **



An Electromechanical Design Engineer is responsible for the design, documentation and production floor support of hardware (missile electronics, missile electrical cabling, airborne support equipment, ground support equipment and test sets.


Additional duties include investigation of discrepant hardware and test anomalies.
Skills:
Required:

Design experience with electrical cables, test sets, breakout boxes, 19” support equipment rack design
Proficiency with Creo Parametric 2.0 Cabling and Intralink.
Proficiency with ASME Y14.5M-1994 and generating detailed engineering drawings.
Proficiency with reading schematics for electrical cable assemblies in order to define and select connectors, backshells, splices, wiring, etc.
Basic computer skills and a working knowledge of Microsoft Office products (Word and Excel)
Compliance to quality and safety policies at all times!
Must be a US Citizen
Physical Requirements – This work requires delicate handling, reaching, light lifting and may require a combination of sitting and standing as well as walking between test locations and occasional use of small step-ladders.
Desired:

Experience with design of flexible and semi-rigid RF cables
Education:
Must have at minimum a Bachelor of Science degree in an Engineering related discipline.

Skills:
Required
DESIGN ENGINEERENGINEEREXCELMICROSOFT OFFICEWORD
Additional
ANALOG SILICONAPQPCABLINGCREODOCUMENTATIONGROUND SUPPORT EQUIPMENTMICROSOFT EXCELMICROSOFT WORDMISSILEPARAMETRICRACK DESIGNREADING SCHEMATICSRFSCHEMATICSWIRING

Minimum Degree Required: Associate's Degree (Community College, MBO)

State/Province: Florida
City/Town: Orlando

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/28/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-A7809667
Job Location: Orlando, FL
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 06/21/2018
Last Updated: 06/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Assemblers Needed in Redmond, WA

Description:
PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply online today, or respond with your resume to: 
 Seattle_wa@pdstech.com

Some of your responsibilities as an Assembler will include:
  • Assemble fabricated parts at floor stations. 
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
  • Use hand tools and power tools to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.
  • Specific tools used will be tweezers, vacuum wands and torque drivers.


These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

All shifts are available.

  


 
Requirements:
  • Experience working with microscope and microscopic components.
  • Soldering skills and experience.
  • Basic computer skills.
  • High school diploma or its equivalent.
  • US citizen or permanent resident.
  • English language comprehension and communication abilities.

 
Job Number: 1710071348
Job Location: Redmond, WA
Duration: 6 months
Input Date: 07/31/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000237QZAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Analysis Engineers (FPGA) - Many Needed

Description:
**Must have Engineering Degree
Seeking experienced (level 3) digital ASIC/FPGA design and verification engineers to support multiple product lines based in Los Angeles, CA.
Proficiency with hardware verification languages: System Verilog, System Verilog Assertions
• Proficiency with Object Oriented Programming Concepts: Inheritance, Polymorphism, etc.
• Proficient in scripting languages: Make, Perl, Python, etc.
Email resumes to: mmccarthy@pdstech.com
 
Job Number: bo-FPGA-BO
Job Location: El Segundo, CA
Rate: $64.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary AnnMcCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electronic Design & Analysis Engineers -- Avionics

Description:
Job locations:
Long Beach, Huntington Beach, or El Segundo, CA

ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

-Medical
-Dental
-Per Diem
-401(k)
-Life
-Vision

Please email us to see if your background matches any of our job openings
 
Job Location: California
Input Date: 04/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner or Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Engineer

Description:
Electronic Engineer for one of our clients in Vancouver, WA.

**Candidate must have a Secret Security Clearance**

Job Description:
Provide professional engineering expertise/assistance to engineering design and field personnel regarding all aspects of documentation:
Assist with the documentation of Telecommunication projects by providing scoping input for concept design documents and producing detailed design drawings, draft bills of materials, and draft statements of work
Review and disseminate all provided documentation of status reports by Field Engineers; may require facilitating project documentation efforts and providing documentation oversight.
Perform basic filing and document management.
Assist with Telecommunication equipment inventory maintenance.
Participate in teams to research and document existing telecommunication and related equipment, including wire tracing.
Mark up “As Built” prints for drawing development in CAD software, documenting anomalies and any pertinent issues.
Verify circuit data via company’s TCIS database (Telecom Circuit Information System).
Research and report on missing information from data sheets, recording appropriately.
Report weekly to company Manager, providing Field Engineer status updates.
Access energized facilities and radio station facilities for a general review of system configuration, spacing and rack layouts. (Requires Access Worker Permit, see page 4).
Facilitate and provide coordination for the design and construction of various facilities including project scheduling and estimating upon request and supervision of company manager/personnel.
With oversight and approval from company staff, prepare to scope input for concept design document, detailed design drawings, bill of material, or procurement specifications for equipment, verifying that technical tradeoffs have been considered and that decisions conform to existing policies and standards and are within budgetary constraints.
Prepare comprehensive final hardware design packages for assigned projects, including final detailed design drawings, draft statements of work (construction and contract), and all other documents for the telecommunication equipment installation, layout, wiring, and testing for review and approval by the company staff.
Participate in events at specific project sites, including scoping meetings, equipment installation, and testing phases.
Education/Experience:
A Bachelor’s Degree in Engineering, preferably in Telecommunications Engineering or a closely-related field is required.
Level 1 position: ½ to 4 years of experience in Telecommunications Engineering or closely-related field is required.
Proficiency with Microsoft Office Suite products, such as Word, Excel, PowerPoint, and Outlook (Microsoft Office 2010 proficiency required).
Technical Requirements:
Must know engineering concepts, principles, and practices.
Skill in oral and written communication to effectively fulfill client/customer/team requirements.
Experience or knowledge regarding managing and providing coordination for the design and construction of various facilities including project scheduling and estimating is desirable.
Experience or knowledge regarding the review and evaluation of design packages (including drawings, material certifications and submittals for conformance to the design specifications) is highly desirable.
Ability to analyze complex installations, facilities or structures using the latest techniques and applicable codes.
General Requirements:
Carry out assigned tasks with a professional demeanor reflected in excellent written and oral communication skills, listening skills, patience, analytical reasoning and problem-solving abilities.
Meet timelines, milestones, deliverables and provide timely status updates.
Participate and perform effectively in a project team environment and effectively manage multiple work assignments and changing priorities.
Obtain appropriate manager/personnel approval for all recommendations and drafted materials.
Ensure proper identification of self as a contract worker in all communications, correspondence, etc.
Additional Requirements:
The selected candidate will be required to sign a company Non-Disclosure Agreement (NDA) as a condition of the contract assignment.
Offsite Work may not be performed without prior approval from the Client Manager.
All information associated with work performed offsite must be maintained in the company network environment. No company information will be allowed to be transmitted, stored and created, etc., on the contract worker's devices. Contract personnel must follow all company and government-wide security, asset management, and cybersecurity policies and procedures.
Offsite work may only be performed within the company service area unless approved by the Supplemental Labor Management Office (SLMO). Contract personnel must keep their employees informed of their work location at all times and must coordinate any changes with their employer and SLMO before the change occurs.
Approximately 20% local and overnight travel to field locations is required (PPE Required)
Up to 5% Overtime may be required
Frequent walking on uneven terrain.
Valid U.S. drivers license is required
First Aid/AED/CPR Certification required within 30 days of assignment start.
The worker/employer is responsible for maintaining current certification.
Personal Protective Equipment (PPE) is required for all field travel:
Must obtain and maintain an Access Permit (see the following appendix) as a condition of this assignment
ASTM F2413-11, Class 75EH rated footwear with over the ankle lace up and rigid sole and heel. Arc Flash-rated footwear requirements: The exterior of the boot must be made entirely of natural materials - all leather or a leather and rubber combination.
White Hard Hat required for Access Permit holder
Electrical and Arc Flash protective clothing and PPE as required by OSHA and consistent with company Safety and health policy for electric work inside and around company substation facilities (Occasional User - estimated usage 4 - 5 days per month)
Eye protection
Hearing protection
Dust Mask
Hand protection (work gloves) as needed.
Other appropriate/required PPE, as required by State or Federal OSHA for the work to be performed.
 
Job Number: 29323
Job Location: Vancouver, WA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 1 year, could go longer
Input Date: 05/08/2018
Firm Name: TAD PGS INC
Attention: Terry Bentley
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engineer IV - (OK)

Description:
Active Secret Clearance, NOT REQUIRED to start.

Candidate to perform Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics required.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK29921
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electronic Systems Design & Analysis Engineers

Description:
ACS Group has been in the aerospace industry for over 30 years - Helping top talent in the aerospace industry find exceptional careers! Positions available now

-Medical
-Dental
-Per Diem
-401(k)
-Life
-Vision

Please email us to see if your background matches any of our job openings
 
Job Location: Oklahoma City, OK
Input Date: 04/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner or Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com; andrew.walbert@comforce.com
Website: www.acsicorp.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Specialist

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Electronics Specialist
(U.S. Citizenship Required*)
Tallahassee, FL
2018-5914

Responsibilities:
• Perform troubleshooting of production hardware including but not limited to circuit cards, harnesses, electrical boxes and vehicle harnesses.
• Perform routine testing of production hardware at the box and circuit card level using automated, semi-automated bench top equipment.
• Perform troubleshooting of production electro-mechanical production hardware
• Support Test Engineering and Manufacturing Engineering in the identification and resolution of production yield issues and customer returns/complaints.
• Adequately record results in troubleshooting, testing and investigations to ensure all aspects of our Quality and Manufacturing systems are fulfilled.
• Performing hand-check testing on certain hardware using appropriate meters.
• Work with Test Engineering to trouble-shoot test station issues and write documents for items not working properly.
• Write up test equipment issues

Qualifications:
• Must be familiar with the use and operation of various types of test and measurement equipment to include; oscilloscopes, digital multi-meters, power supplies, logic analyzers, bus analyzers etc.
• Must be computer literate and familiar with standard computer applications like MS Word & Excel, email, etc
• Able to learn our systems at an accelerated pace.
• Familiarity with DITMCO and VXI a plus.
• Able to read, interpret, and use drawings and schematics for troubleshooting of production hardware.
• Must be a US citizen capable of obtaining a Security Clearance.
• Able and willing to work overtime during the week and weekends.
• Must be able to wear PPE including protective shoes and glasses.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Associated Degree in Electrical or Electronics Engineering Technology (ASEET) or equivalent (additional experience or military training will be considered in lieu of degree)
• 2-5 yrs related work experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5914
Job Location: Tallahassee, FL
Rate: Based on experience
Input Date: 05/03/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Electronics Technician - NY

Description:
Chipton Ross is seeking an Electronics Technician in Skaneateles Falls, NY.

Position Overview: As an Electronics Technician, you will provide technical and hands-on support on increasingly complex products. Your strong electronic and analytical skills will allow you to find and resolve product failures to serve our customer quickly and accurately. Your expertise in troubleshooting, testing and correcting malfunctions in electronic devices, and test equipment will aid you in repairing the instruments that are returned to client for service. Using your service experience, you will be asked to help in the development of lean service methods and procedures for the repairing and inspecting of products or assemblies. Your strong communication skills will allow you to train other internal or external service personnel as needed. By establishing regular internal contacts, you will exchange information, resolve issues, solve problems and troubleshoot products, parts or processes. You are a collaborative team player and are capable of receiving initial instructions, Service requirements, and advice from your supervisor or engineers with review upon completion. A crucial aspect of this position will be applying quality improvement and lean practices to all process and assignments while actively participating in a positive manner with functional and cross functional teams.

Responsibilities:
* Test, troubleshoot, and repair Medical Devices, test fixtures and Automated Test Equipment (ATE).
* Identify, isolate and control nonconformance of components or products.
* Record product service data using defined data collection methods.
* Conduct internal communication with internal departments or external customers and vendors to resolve issues.
* May provide technical training assistance for external biomedical staff, customers or vendors as required
* May travel to customer locations to perform assistance when performing service, calibration, or training.

Requirements:
* Hands-on experience, skill set and leadership qualities will determine salary grade.
* Strong troubleshooting, analytical and problem-solving experience and aptitude.
* Work collaboratively across different functions, flexible, self-directed, and task oriented.
* Must be organized and have a keen attention to detail.
* Proficient test equipment or tools such as: Digital Multimeter or Oscilloscope.
* Strong oral and written communication skills are preferred. You may be asked to speak publicly to a small group and on the phone or face to face with our customers.
* Working knowledge of Windows Operating systems (Microsoft Office, Excel and Power Point) is a plus
* Ability to travel to perform on-site service is a plus
* SAP Experience is a beneficial

Education:
* Associate's degree in Electronics, Computer Information/Tech or related discipline

Schedule:
* First shift

 
Job Number: 169985
Job Location: Skaneateles, NY
Rate: $16.62 to $24.28 DOE
Duration: 6 month
Input Date: 04/06/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Chris Conaway
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cconaway@chiptonross.com
Website: www.chiptonross.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.

Hours:
3rd Shift
 
Job Number: 169255
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/16/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

Electronics Technician Maintenance II (4)-FL-C

Description:
Chipton-Ross is seeking 4 (four) Electronics Technician Maintenance II in Eglin AFB, FL.

Description
The Electronics Technician Maintenance II, maintains, repairs, troubleshoots, modifies and installs various types of electronic equipment and related devices such as electronic transmitting and receiving equipment (e.g., radar, radio, telecommunication, sonar, and navigational aids); personal and main frame computers and terminals, industrial, medical, measuring, and controlling equipment; and industrial robotic devices. The successful incumbent applies technical knowledge of electronics principles in determining equipment malfunctions and applies skill in restoring equipment operation, evaluates performance and reliability of prototype or production mode, and recommends changes in circuitry or installation specifications to simplify assembly and maintenance. The Electronics Technician Maintenance II applies basic and some advanced knowledge to solve problems by interpreting manufactures' manuals or similar documents. Work requires familiarity with the interrelationship of circuits and judgement in planning work sequence, in selecting tools, testing instruments, and reviewed for compliance with accepted practices. This technician works under immediate supervision and achieves technical guidance, as required from supervisor or higher-level technician. Required experience includes a minimum of 6 years inspecting, troubleshooting, and repairing aircraft avionics and electrical systems (GAC, COM/NAV, EW, Sensors, Electro Environmental, Aircraft electrician). The candidate must have experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components, avionics boxes and chassis' using common and specialized and interpret technical manuals, schematics, and drawings. Successful candidates should also possess experience fabricating, installing, routing, terminating, soldering, and repairing electrical wiring harness; or any variety of electrical components, and equipment associated with aircraft systems functionality. Additional task are required, and include but not limited to: HAZMAT/HAZWASTE handing, corrosion control, inspection and repair, maybe part of an aircraft tow team.

Mandatory:
Modification experience

Desired:
Familiar with CON/NAV, EW, Sensor, Electro Environmental, on C-130 or CV22 aircraft.
 
Job Number: 169253
Job Location: Eglin AFB, FL
Rate: $29.58 to $31.25 DOE
Duration: 2 months
Input Date: 03/06/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Employee Files Clerk

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Employee Files Clerk
(US Citizenship Required*)
Pittsfield, MA
2018-5933

The Employee Files Clerk will apply company records procedures to parse existing paper employee documents and use current scanning technologies to scan and load these files to the electronic personnel records application, KwikTag.

Responsibilities:
• Enter data from a source document into a computer system
• Verify entries for accuracy and completeness
• May convert data from one electronic system to another
• Perform audits of own work to ensure conformance with established procedures
• May work with stand-alone data systems or enterprise wide tools supporting activities such as marketing lead tracking, fulfillment, manufacturing, and equipment maintenance or materials transactions
• Maintain employee files and personnel records

Qualifications:
• Considerable understanding of the job; applies knowledge & skills to complete a wide range of tasks
• Works on routine assignments, ensuring that high levels of accuracy are maintained
• Able to work with little instruction and general instructions on newly introduced assignments
• Consistently displays high performance attributes
• Influential with others and demonstrates superior communication and collaborative skills consistent with expectations for position
• Detail-oriented, comfortable using a computer and scanner, and familiar with personnel files.
• Due to the nature of the work, the position requires a highly responsible individual able to maintain the utmost standards of confidentiality.
• Experience with electronic records, scanning tools and/or KwikTag (or equivalent system) is preferred.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent is required plus a minimum of 2 years of relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5933
Job Location: Pittsfield, MA
Rate: Based on experience
Duration: 6 Months
Input Date: 05/07/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Bradley Davis
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer

Description:
Per Client 'US Citizenship Required'

The engineer in this position will apply knowledge of Mechanical design principles to assess and resolve product/process issues through the product lifecycle. Analyze requirements, design systems and structures, participate in formal design reviews, and release associated drawing through the company release process. Apply engineering principles to research technical, operational and quality issues and design interim and engineering solutions. Identify documents, analyze and communicate design; recommend resolutions. Support Integrated Product Teams (IPT) and actively organize and participate in design review.


Skills Required:
• Strong understanding of mechanical engineering principles, materials, mechanics and heat transfer.
• Strong verbal and written communication skills.
• Highly motivated
Experience Required:
• 3+ years Creo.
• 5+ years design and drafting.
• BS Mechanical Engineering.
Skills Preferred:
• MS Mechanical Engineering.
• ProE.
• GD & T - 1+ years circuit board / electronics design and drafting
TEMP TO HIRE POSITION
 
Job Number: 27938
Job Location: Manassas, VA
Rate: 38.00
Per Diem: No
Overtime: Possible
Duration: Temp to Hire
Input Date: 05/08/2018
Firm Name: TAD PGS INC
Attention: Terry Bentley
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 714/622-3967
800 Phone: 800/261-3779
Fax Phone: 714/897-8455
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electronic Technician, Level 3 FAA

Description:
PDS Tech is seeking an FAA Electronics Technician - Level 3 for an open position in Olathe, KS.
In your role you will:

  • Construct, maintain, and test electrical systems and components.
  • MUST be able to test & troubleshoot down to the component level.
  • MUST BE ABLE TO READ SCHEMATICS - To diagnose and repair circuitry.
  • Use measuring and diagnostic tools to test and modify electronic parts.
  • Ensure systems and components meet established specifications.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of complicated tasks.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor or manager.

Please send your resume to mmarquez@pdstech.com today!!!!
As our ideal candidate, you will meet the following requirements:
  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 4-6 years of experience in the field or in a related area.
  • Soldering background/experience is a PLUS
  • Troubleshooting Electronics to component level PREFERRED experience.
  • MUST HAVE ELECTRONICS BACKGROUND. 
  • Background in avionics electronics and mechanical background is very beneficial.
  • Must be a U.S. citizen.

Please send your resume to mmarquez@pdstech.com today!

 
 
Job Number: 1810084817
Job Location: Olathe, KS
Duration: 6 months
Input Date: 04/13/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNiXAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer

Description:
Position Description

Seeking a lead Electrical Hardware Design Engineer. The individual selected for this position will be a proven leader with diverse technical capabilities and demonstrated “hands-on” electrical engineering expertise. The individual will contribute to the design, development, integration/test, and production of dynamic IR based electro-optic military systems. The engineer will work with a multi-discipline team to develop complex products including lasers, receivers, sensors, as well as multi-axis beam directors. The individual must be a self-starter with development experience working with integrated military avionics/electronic hardware and supporting test equipment. The selected candidate will be expected to lead electrical/hardware engineering teams through all phases of the product life cycle from conceptual development and detail design through qualification, manufacturing transition and production support. The engineer will be responsible for developing robust hardware architectures and solutions to meet demanding customer requirements, and will leverage their electrical engineering expertise to lead and/or perform circuit and CCA design and analysis, FPGA/CPLD designs/developments (Xilinx, Lattice), technical trade studies, analog/digital/mixed signal interface design, reverse engineering of legacy designs, component selection, evaluation of technology insertion/upgrades, as well as laboratory test and troubleshooting. Day to day, activities may range from planning work products and managing subcontract developments to supporting product builds & integration efforts. With a product focus, the individual is also expected to actively partner with operations personnel to develop solutions that adhere to UPC, DFT, and DFM requirements. Additionally, the engineer will support resolution of technical issues that are discovered during manufacture and test of deliverable hardware. This will include evaluating and troubleshooting LRU and circuit card level issues, assess test faults for root cause, identify disposition/corrective actions, and evaluate test equipment performance and integrity. The ideal candidate will thrive in a learning environment that encourages leadership and technical growth.



Skills Required

Established digital hardware architect for complex military/avionic equipment
Solid fundamentals of digital/analog/mixed signal electronics and interface/communication standards
Working experience with lasers, receivers, sensors/cameras, and/or related IR technologies
Understanding of complex electronics manufacturing and test methodologies
Experience with state-of-the-art electrical engineering development tools
Demonstrated leadership capabilities in team environment with strong written and verbal communication skills
Motivated self-starter and problem solver with proven experience in leading and supporting diverse multi-disciplinary teams


Skills Preferred

Current “hands-on” experience with Cadence electrical engineering development tools
Experience with XILINX & Lattice FPGA developments and toolsets.
Familiarity with JTAG protocol
Control account management experience
MATLAB/Simulink tool experience
Familiarity with image and signal processing algorithms
Life cycle engineering support related to diminishing manufacturing sources and material shortages (DMSMS)


Experience Required

5+ years of experience with laser, IR, and other detection and imaging technologies The selected electrical engineer is expected to have applicable experience in the following areas:
10+ years of demonstrated experience in Product development and support of DoD military electronics/avionics equipment
Design and development of IR technology hardware and systems (lasers, detection/imaging sensors, etc.)
Design and development of motion systems including motors, encoders, controllers, laser diode drivers, airborne power systems
Design of digital hardware architectures that leverage embedded processors, microcontrollers, and VHDL based FPGAs that provide capability and functionality to a larger system
Digital, Analog and Mixed Signal design and troubleshooting with an excellent working knowledge of common electronic circuits and components
Demonstrated experience in Product/Factory Support of DoD military electronics/avionics equipment
State-of-the-art electrical engineering design tools
Design and manufacturing standards associated with complex multilayer CCAs
Strong “hands-on” laboratory experience with instrumentation, equipment, and processes
Working experience with Interface standards including military/avionics communication buses (i.e. RS-485, Mil-Std-1553B, Ethernet)
Technical leadership of electrical / hardware teams in executing engineering development efforts


Education Required

Bachelor's degree in Electrical Engineering with 12+ years of experience OR a Master’s Degree and 10+ years of experience
 
Job Number: 41859
Job Location: Nashua, NH
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 06/14/2018
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Flight Readiness Technician D (4) - CA - C

Description:
Chipton-Ross is seeking 4 Flight Readiness Technician D's located in Palmdale, CA

RESPONSIBILITIES:
Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight, Individual job duties may include: Perform operational checkout of aircraft prior to and during preflight. Inspect explosive and armament installations. Maintain aircraft historical records. Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft. Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems. Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed. Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting, adjustment and repair of any electrical or electronic system. Fabricate, adjust, trouble shoot, repair and modify electronic test equipment. Perform operational checkout of hydraulic systems and mechanical systems. Diagnose and correct hydraulic and mechanical malfunctions. Operate engines during run-ups and troubleshoot when needed. Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines. Install or replace reservoirs, etc. and repair leaks in same. Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators. Splice, route, clamp, solder, and string tie wires or wire bundles. Repair, install and hook up bomb, missile and rocket racks and pylons. Install and load ejection seats and guns. Install adjust, repair and replace structural parts and assemblies. Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures. Modify aircraft components or aircraft support equipment. Perform composite repairs

ADDITIONAL EXPERIENCE:
Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
Knowledgeable and able to use computer systems for office and shop applications.
Knowledgeable about and able to work in FOD controlled environments.
Knowledgeable and able to apply shop math.
Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
Able to complete and maintain all required training and certifications needed to do your job efficiently.
Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
* F-15 Crew Chief experienced personnel, sound understanding of Air Force Tech Order usage and application. Experienced Flight Line operations, preflight, launch, recovery, and functional checkout of Hydraulics/Avionics/Mission Systems/Weapons loading.
* F-15 Electrical/Avionics experience, sound understanding of Air Force Tech Order usage and application. Versed in Flight Line Operations, Avionics/Electrical preflight and functional checkout of disturbed systems.
* Weapons Load Standardization/Weapons loading: Plans, organizes, participate and directs aircraft armament systems maintenance activities. Establishes and evaluates performance and training standards, maintenance controls, and procedures. Checks methods and techniques used to load and unload munitions on aircraft, to repair and maintain aircraft release and gun systems, and to maintain, repair, and modify associated equipment.


EDUCATION/EXPERIENCE:
This job requires specialized vocational training or an Accredited Associate's degree and 3 to 5 years work
related F15 experience or an equivalent combination of education and experience

VARIABLE SHIFT
WORK HOURS: Candidates need to be available to work 2nd shift, if needed (2nd shift begins at 2:30 PM).

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166698
Job Location: Palmdale, CA
Rate: $DOE
Duration: 12 Months
Input Date: 12/01/2017
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HR and EH&S Administrative Assistant

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

HR and EH&S Administrative Assistant
(U.S. Citizenship Required*)
Joint Base Lewis McChord, WA
2018-5932

Join our team to partner with internal customers to assist in meeting business objectives through effective Human Resources, Environmental Health & Safety and Change Management support.

Responsibilities:
• Assist in the talent acquisition process including coordinating interview schedules, entering data into the applicant tracking system (ATS), and initiating the pre and post-employment processes.
• Enter and monitor purchase orders data required for acquisition of temporary workers.
• Assist with scheduling, preparing, and processing new employee and temporary worker on-boarding.
• Update and maintain employee data in HRIS, as well as a variety of confidential and sensitive electronic and hard copy records and files.
• Prepare and maintain HR, ES&H and Change Management specific metrics utilized by the business unit leadership teams.
• Respond to general inquiries and provide routine information to employees and managers on HR, EH&S and Change Management matters which may include Company policies, procedures and practices.
• Assist processes required for overseas deployment and return of U.S.-based employees.
• Provide general administrative assistance including answering phones, scheduling and calendaring meetings, preparing and maintaining files, preparing correspondence, maintaining and purchasing supplies, processing and tracking various expense reports, scheduling domestic and international travel and preparing and updating reports.

Qualifications:
• Able to maintain the confidentiality of sensitive information
• Excellent interpersonal and written communication skills required to effectively interface with employees, candidates and customers at all levels
• Able to prioritize multiple, time sensitive tasks effectively while maintaining a high-level of accuracy and organization
• Proficient in office software
• Knowledge of HR software such as HRIS, performance management and ATS and Workers Compensation preferred
• Able to gather and analyze information skillfully and analyze data to identify and resolve problems in a timely manner
• A customer service mindset required.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma and 3 -5 years of work related experience; 2 years in Human Resources preferable.
• An associates or bachelor’s degree in Human Resources preferable.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5932
Job Location: Joint Base Lewis McChord, WA
Rate: Based on experience
Input Date: 05/07/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeff Prukop
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Description:
Help Desk Operations Level 2 (REQUIRES ACTIVE SECRET CLEARANCE)

Location: Lexington, KY
Pay Rate: DOE ($30/hr - $40/hr)
Duration: 6 month W2 contract
Travel: Yes, US only, military installations
Shift: First, 5/40, exempt OT
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE; INTERIM CLEARANCE SUFFICIENT**

Description
-Entry to mid level career position. Ideal candidate will have experience in a customer service support role.
-Position will support logistic / supply chain / acquisition web site application users spread over the continental US as well as overseas locations.
-Candidate will work closely with software and system engineers to design, test, deploy, and troubleshoot web applications for a Department Of Defense customer supporting Special Operations Command.
-Written and oral communication skills are critical.
-This is not a remote position.
-Business takes place at 5749 Briar Hill Road in Lexington, Kentucky.
-Candidate can start with an interim clearance.
-No personal portable electronic devices (e.g. cell phones) are allowed into the building where business takes place.

Skill/Experience/Education (Mandatory):
-Tier 1 Customer Service Support (1-3 years' experience required)
-Oral and Written Communication / Good to Excellent Grammar

Desired:
-Basic knowledge of relational databases and the ability to write standard SQL statements (1-3 years' experience desired) – (Basic SQL Query Knowledge)
-CompTIA Security+ certificate (desired)
-User Story Creation
-Agile SDLC Experience
-Technical Writing
-Software Testing
-Software Training
 
Job Number: 8673
Job Location: Lexington, KY
Rate: 30-40
Per Diem: Split Possible
Overtime: Exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Integration Specialist Technician

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:

  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

As our ideal candidate, you will meet the following requirements:
  • High School Diploma or GED
  • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
  • Must be a U.S. Citizen.





 
 
Job Number: 1610054052
Job Location: Huntsville, AL
Per Diem: No
Duration: 6 months
Input Date: 09/09/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

Software Engineer - contract work - AZ

Description:
Developing
(1) network client/server software
(2) Distributed Systems
(3) TCP / UDP communication protocol.]
The position requires someone who’s actually done software development focused in the areas that are captured above.
C++ development.
Should be familiar w/ UML.
-Knowledge of WindRiver Simics or Perl will be considered a plus.

Role/Duties:
Design, develop and test spacecraft simulation software.
Debug and diagnose software in a lab environment.
Coordinate with engineering peers of other disciplines to develop software models of hardware components, support software integration activities and resolve interface issues.
The candidate must work in a team setting but should be able to independently and efficiently manage their time to complete assignments in a dynamic, schedule-driven environment.
 
Job Number: 205878
Job Location: AZ
Rate: 50-75 / hr
Per Diem: YES
Overtime: Possible
Duration: 12 months
Start Date: 2/3 weeks
Input Date: 05/29/2018
Last Updated: 08/17/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Test Engineer - Avionics

Description:
Must be US Citizen or Permanent Resident

  • The Lead Test Engineers will be responsible for test station development including: planning, requirements, architecture, software design and development (C/C++/C#), validation, verification and release.




Qualifications/Requirements



Must have: TestStand and LabWindows CVI



  • Bachelor's Degree of Science in Engineering, Physics, Chemistry, Mathematics, or Computer Science, Information Technology (IT), Engineering, Scientific, or other Technical experience

  • Minimum of 5 years of experience with software and hardware integration between test station host controller and product hardware executing either embedded test software or product software application interfaces or similar experience

  • Strong familiarity with processor based electronics hardware, especially with respect to test and diagnostics

  • Strong .NET C# architectural experience developing test systems with ATP/ESS/Qual operational requirements

  • Strong familiarity with TestStand

  • Strong familiarity with Windows CVI



 
Job Number: 18-14959
Job Location: Grand Rapids, MI
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-04-29 00:00:00.0
Start Date: 2018-04-30 00:00:00.0
Input Date: 04/13/2018
Last Updated: 05/16/2018
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Legal Administrator D

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Legal Administrator D
(U.S. Citizenship Required*)
Chicago, IL
2018-5950

Join our Law Department as an Executive Legal Administrative Assistant to support busy attorneys and paralegals in a variety of administrative areas such as: document/presentation generation and proofreading, travel arrangements and expense reporting, schedule management, and phone coverage.

Responsibilities:
• Manage calendars, coordinate meetings, teleconferences, WebEx meetings, and conferences.
• Coordinate and process domestic and international business travel arrangements.
• Monitor designated business traveler’s logistics, and generate expense reports.
• Generate, revise, proofread letters, presentations, and correspondence.
• Act as liaison and facilitate communications between the law department and clients, assess urgency of situation and determine appropriate action.
• Review, assess, prioritize, monitor status of pending items, follow up and keep attorney/staff informed.
• Handle appropriately communications of a sensitive and confidential nature.
• Triage and organize all forms of communication as desired including incoming calls, messages and correspondence received.
• Verbally and electronically communicate a wide variety of information to multiple audiences.
• Plan and implement logistics for executive level internal and external meetings.
• Process invoices, track department budgets and generate reports using spreadsheets and internal legal matter management system.
• Coordinate with the appropriate focal(s) to support the acquisition and maintenance of resources.
• Maintain files and correspondence using accepted legal office practices and company record keeping systems and procedures.
• Provide back-up assistance to other Legal Administrators, as needed.

Qualification:
• Required – successfully pass a credit check
• Experience providing administrative support to multiple customers such as executives, managers and staff members.
• Experience in schedule management and travel or event planning preferred.
• Experience making domestic and international travel arrangements and generating expense reports preferred.
• Extensive work experience using Adobe Professional and Microsoft Office products including
• Outlook, PowerPoint, Excel, and Word.
• Demonstrated ability to work under limited supervision in a fast-paced environment, and perform multiple work assignments concurrently, often within a short period of time.
• A positive, energetic, flexible, and team-oriented attitude.
• Superior verbal and written communication skills including excellent spelling, grammar, punctuation, form and style, proof reading and editing skills.
• Meticulous attention to detail with emphasis on accuracy and quality.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree or higher and at least 5 –10 years’ experience preferred.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5950
Job Location: Chicago, IL
Rate: Based on experience
Duration: 3 Months
Input Date: 05/10/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Peggy Holcombe
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

MP&P Engineer 3 - CA

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Huntington Beach, CA

RESPONSIBILITIES:
Parts Manager/Components Engineer - Manage the electrical, electronic, and electro-mechanical (EEE) parts and components including subcontractor oversight of EEE parts and components for the PAC-3 Program. Position requires a strong track record in communication with program management, customers, and subcontractors outside of Client. The position also requires controlling PMP product specifications, subcontractors parts management control plans, and DMSMS part management plans, lead teams in assessing applications, qualifications, evaluate/approve replacement EEE parts and components including qualification of plastic encapsulated microcircuits (PEMs), technology insertion, life cycle cost and parts obsolescence assessments/solutions, developing non-standard parts approval requests (NSPARS) for new part additions and assessing derating exceptions. The parts manager will have authority regarding all technical PMP dispositions. The parts manager is expected to integrate technical, value, safety, and HAZ-MAT considerations of EEE parts and components into product definition to comply with Client, customer, and government requirements. The parts manager will be the prime interface with the customer on parts, materials and process concerns and lead initiatives to improve/develop PMP control processes in the absence of existing procedures for the PAC-3 Program as well as for the Client enterprise PM&P Engineering Function. The parts manager will support with the PAC-3 PMPCB Chairman and work with parts managers/component engineers as well as other members of the PAC-3 Program team to define/implement engineering solutions to meet organization objectives. The parts manager will also work with the PAC-3 reliability, quality, configuration management, and logistics team to implement the PAC-3 Program PMP practices across the program in a cost efficient manner while maintaining contractual standards.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 4 PM

MISCELANEOUS:
Travel Required-Travel to EEE Part manufacturer's local and domestic travel on occasion.

 
Job Number: 168068
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 01/22/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Description
Support the non-recurring manufacturing activities on the IRST Program. The individual will be responsible for the development of manufacturing work instructions and tooling necessary to build circuit cards and Cables/harnesses in a production environment.

Mandatory:
Experience in the Electronics field directly supporting the documentation development to support the build of hardware. Hands on experience in either CCA or Cable and Harness build, tooling development and work instruction. Bachelors degree required or relevant work experience.
 
Job Number: 41708
Job Location: Ocala, FL
Per Diem: Split
Overtime: Possible
Duration: 9 month +
Start Date: ASAP
Input Date: 06/14/2018
Firm Name: PANTHER GROUP
Attention: Bob
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner III & IV - Electrical/Electronics - (WA)

Description:
SEVERAL OPENINGS IN THE EVERETT & RENTON, WA AREAS.

Manufacturing Planners with Electrical/Electronics experience.

- Develop, implement and maintain various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Assist with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
- Assist in reviewing supplier data to ensure manufacturing related requirements are met.
- Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
- Assist in tooling dispositions.
- Investigate and resolve manufacturing related issues of limited scope.
- Assist with producibility assessments for part or product designs.
- Assist in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
- Develop work statements and sequencing of events to support delivery commitments.
- Assist in the review, maintenance and monitoring of internal documents.
- Provide ship side support, research and shop assistance

Preferred Qualifications:

- Basic understanding of wiring and wire routing
- - Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions.
Experience in Teamcenter
- Experience using Manufacturing Execution Systems (CMES)
- WIRS: Wires Information Release System
- CAPP II

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: MPEEwa
Job Location: Renton & Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 05/16/2018
Last Updated: 06/15/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Research Engineer

Description:
Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.


Seeking an electronic/photonic/manufacturing device engineer or research scientist to provide support to a program focusing on printing techniques for electronic and photonic device fabrication. The selected candidate will use additive manufacturing and conventional cleanroom processing techniques to fabricate and design electronic and RF components for a variety of applications such as basic electronic controls, RF antennas, photonics, etc. Additive manufacturing refers to inkjet printing, aerosol jet printing, extrusion printing (such as Nscrypt), and 3D printing such as polyjet or thermoplastics; conventional cleanroom processing techniques refers to photolithography for electronic device fabrication and its associated characterization. Expertise is not expected in all of these areas, but some familiarity is needed. The selected candidate will complete research tasks with minimum oversight and deliver completed prototypes, produce reports, and process documentation. Duties will include designing experiments to characterize printer performance, identifying appropriate materials to deposit either purchased commercially or manufactured in-house, and some device design and characterization of manufactured devices. Additional responsibilities will include 1) designing and fabricating photonic and electronic devices, 2) becoming an expert at running and maintaining both the aerosol jet and ink jet printers, 3) specifying additional materials and equipment to purchase to support research, 4) contributing to reports and presentations of technical progress, and 5) authoring scientific papers and attending conferences. Education/Experience: The selected candidate must have a PhD in electrical engineering, materials engineering, mechanical engineering, physics, optics or related field with three years of experience. Knowledge, Skills and Abilities: This position will require basic knowledge of CAD or AutoCAD and software design. Familiarity with materials and device characterization is required: electrical, RF, optical, mechanical. Familiarity with RF modeling software (such as Comsol) is desired. Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: KM0011
Job Location: Dayton, OH
Input Date: 04/27/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Material Handler I - WA

Description:
Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

RESPONSIBILITIES:
25% - Records information regarding materials received and shipped in the department computer system.
10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
20% - Packaging and handling materials within company guidelines.
10% - Counting and/or weighing incoming parts to verify receipt.
25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

REQUIRED EXPERIENCE:
1 year of related experience
Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
BOX TRUCK
ERP
EXCEL
FORKLIFT
MATERIAL HANDLER
Additional Skills:
MATERIAL HANDLING
MATERIAL HANDLING EQUIPMENT
MRP
MS OFFICE
OUTLOOK
AEROSPACE
CONVEYOR
ENTERPRISE RESOURCE PLANNING
ESD
KITTING
MICROSOFT EXCEL
MICROSOFT OFFICE
MICROSOFT OUTLOOK
ORACLE
PACKAGING
SHIPPING

PREFERRED EXPERIENCE:
Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80 , 6:00am to 3:30pm Shift
Full-Time

 
Job Number: 170803
Job Location: Redmond, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/07/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

Mechanical Technician

Description:
The Technician will support engineering activities in accordance with SIS-VT work instructions and procedures.  This position is to support work ongoing at the SIS-VT facility.  This position will work in the following capacity:
  • Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
  • Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
  • Participate on project teams.
  • Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
  • Structure modifications to programs w/ Labview or other SW packages/programs.
  • Design simple circuits, fixtures, or mechanical parts.
  • Provide technical solutions to engineering.
  • Participate on safety initiatives.

Basic Qualifications
  • Production assembly experience preferred.
  • Must have experience troubleshooting and the ability to interpret schematics.
  • Must have good mechanical and/or electronic (analog and digital) repair capabilities.
  • Must be highly motivated and dedicated to exceeding customer expectations.
  • Associate’s/Technical degree and/or equivalent proven experience.
  • Critical thinker & able to offer Value Added Solutions.
  • 1-5 year’s experience.
  • Proficient with standard electrical lab test equipment.
  • Basic knowledge of MS Office, and preferred experience in Matlab and MS Visio

 
Additional Qualifications
  • Experience working with  requirements documents, and requirements based design
  • Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department
  • Familiarity with gun hardened electronics design a plus

 
Skills
  • Proficient in communicating in English Language
  • Strong Communication and Interpersonal Skills
  • Strong Analytical and Problem Solving Skills


 
 
Job Number: 1810079817
Job Location: Vergennes, VT
Duration: 12 months
Input Date: 04/25/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023eHLAAY&URLSource=cjhunter

N/C Engineer

Description:
N/C Engineer conducts a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required. 8. May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives. 4. Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function. Programmer requirement is for a Highly skilled NC programmer for high speed machining centers. Programmer must also have experience related to the startup of a new high-speed machining center.




Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 08/17/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Packaging Design Engineer - Level 4

Description:
Packaging Design Engineer - Level 4

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 Month W2 Contract
Shift: First, OT possible
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Duties:
** This is a Hardware packaging role. NOT a Software or Electrical packaging role. Candidates should have Mechanical Packaging experience **
-Selected candidate will work with Lead Packaging Engineer to provide packaging requirements, specifications, and concepts for ongoing and future programs.
-The selected candidate will evaluate technical feasibility between product lines, and type of packaging required, with an emphasis on innovation, functionality, and sustainability.
-And where required, provide estimates of costs and potential suppliers for functional packaging, and interact closely with both product teams, and packaging suppliers for a best fit packaging solution.

PRIMARY RESPONSIBILITIES:
(40%) Designs and develops packaging, handling, and transportation concepts for various programs with an emphasis on the materials and structural characteristics of the finished packaging product, with a keen ability to handle multiple projects and work under pressure to meet deadlines and project objectives
(30%) Ensures functional compatibility with packaging equipment and overall efficient manufacturing operations.
(20%) Provides packaging technical input and assistance internally and externally to product teams, Quality Assurance, Structures, and can network effectively with vendors, enterprise communities to transfer knowledge and apply external ideas to packaging capabilities.
(10%) Maintains an up to date knowledge of all relevant Packaging Safety and Compliance requirements, as well as industry trends and developments for the packaging of military items.

Skills:
-CREO required
-WindChill strongly preferred
-5+ years packaging experience is a plus
-Familiar with ASTM standards for packaging, and shipping boxes is a plus.
-Familiar with MIL-HDBK-304, MIL-STD-810, and MIL-STD-2073 is a plus.
-Strong communication skills.
-Excels in a collaborative team environment and is able to lead cross-functional teams, also work in cross-functional teams.
-Understanding of ISTA guidelines with an emphasis in reducing product damage and improving environmental performance.
-Networking & Information gathering skills
Education:
-B.S. Degree in Packaging Science, Mechanical Engineering or equivalent combination of education/experience

Skills/Required
AEROSPACE DESIGN ELECTRONIC PACKAGING ASTM STANDARDS MIL-STDS CREO
 
Job Number: 8869
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/20/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PhD Additive Manufacturing Research Engineer

Description:
Our Fortune 500 client in the government contracting industry is seeking a PhD Research Engineer to join their team at the Wright Patterson Air Force Base in Ohio.

Please note that this position only requires U.S. citizenship - it does NOT require a clearance of any kind; however, if converted permanent, the successful applicant will likely be asked to obtain a clearance.

This position REQUIRES a PhD. There is absolutely no flexibility. Master's degrees will be rejected.


Job Description:
Seeking an electronic/photonic/manufacturing device engineer or research scientist to provide support to a program focusing on printing techniques for electronic and photonic device fabrication.
The selected candidate will use additive manufacturing and conventional cleanroom processing techniques to fabricate and design electronic and RF components for a variety of applications such as basic electronic controls, RF antennas, photonics, etc.
Additive manufacturing refers to inkjet printing, aerosol jet printing, extrusion printing (such as Nscrypt), and 3D printing such as polyjet or thermoplastics; conventional cleanroom processing techniques refers to photolithography for electronic device fabrication and its associated characterization.
Expertise is not expected in all of these areas, but some familiarity is needed.
The selected candidate will complete research tasks with minimum oversight and deliver completed prototypes, produce reports, and process documentation.
Duties will include designing experiments to characterize printer performance, identifying appropriate materials to deposit either purchased commercially or manufactured in-house, and some device design and characterization of manufactured devices.

Additional responsibilities will include
1) designing and fabricating photonic and electronic devices,
2) becoming an expert at running and maintaining both the aerosol jet and ink jet printers,
3) specifying additional materials and equipment to purchase to support research,
4) contributing to reports and presentations of technical progress, and
5) authoring scientific papers and attending conferences.

Education/Experience: The selected candidate must have a PhD in electrical engineering, materials engineering, mechanical engineering, physics, optics or related field with three years of experience.

Knowledge, Skills and Abilities:
This position will require basic knowledge of CAD or AutoCAD and software design.
Familiarity with materials and device characterization is required: electrical, RF, optical, mechanical.
Familiarity with RF modeling software (such as Comsol) is desired.
Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.

Shift:
M-F 8:00 - 5:00
 
Job Number: 18-11465
Job Location: Dayton, OH
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 1 Year Contract-TO-Hire
Start Date: ASAP
Input Date: 05/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer / no clearance CA

Description:
8218516
Principal Software Engineer
El Segundo, CA
no clearance
open rate
12-18 months

Need a senior STE SW developer. This is still a technical contributor, but must have requirements and design experience. Must be able to prepare Test and Integration Plans and Test Procedures. They will help lead the unclassified portion of STE design and development.

Job Description:
Advanced software technologies are critical to Raytheon’s Space and Airborne Systems’ strategic business areas – Advanced Concepts & Technologies (ACT), Electronic Warfare Systems (EWS), Integrated Communication Systems (ICS), Intelligence, Surveillance and Reconnaissance (ISR), Secure Sensor Solutions (S3), and Space Systems (SS).
Our Space Programs lead the industry in demonstrating the speed and agility required for next generation responsive space missions. A qualified candidate for the Space Programs will apply technical principles, theories, and concepts associated with software development and design for Special Test Equipment to verify Flight Hardware and Software at Board, Unit, & System level. Primary responsibilities include requirements management/development, software architecting and preliminary design, coding & unit testing, orchestrating Test Equipment to stimulate and instrument Flight Unit Under Test (UUT). Additional responsibilities include: software development of command, control, and telemetry of various space-based sensors and control mechanisms, and system, unit, and module software test activities.
The candidate must be a self-starter, have the ability to work independently, and the ability to manage personal workload to meet assigned deadlines. The candidate should have experience successfully working in a collaborative environment. The candidate will be involved with the planning, conduct, and coordination of software designs, software architecture, and documentation.
Required Skills:
• Experience in C/C++
• Experience with Test Development Environments (LabWindows/CVI, LabVIEW, TestStand)
• Experience with Test Equipment interface with GPIB, Spacewire
• Experience with Test Station Integration and Diagnostics
• Experience in the overall product integration, validation, and verification of the System
• Experience in the preparation of Test Plans, Integration Plans and Test Procedures

• Experience in full life-cycle software development, implementation, design and overall architecture
• Expertise writing Software Requirements Specifications and Preliminary design development
• Experience with software test activities
• Experience Assuring Product under test meets the design and performance requirements in accordance with the build plans, the User needs, and Customer expectations
• Working knowledge of DOORs
• Experience presenting to and interfacing with both internal and external customers
• Minimum 8 years of related technical individual contributor experience in large team software engineering development
• US Citizen
Desired Skills:
• Experience with Space Flight test and Integration
• Experience with software implementation of timing and controls
• Experience with Built in Test (BIT) implementation
• Experience with Configuration Management tools
• Experience with automated test tools, techniques, and practices
• Experience with tools such as RHAPSODY, JIRA, VectorCast, and GoogleTest
• Experience with Agile-Scrum methodology
• Understanding of software development best practices and processes
• Knowledge of MS Office or other presentation tools

Required Education:
BS or higher degree in Engineering, Science, Mathematics, Physics, or equivalent.
Hours: 8:00am to 5:00pm
Location: El Segundo CA United States

Contractor Work Week 5/40
Bachelor Degree Required? Yes

U.S. Citizen Required? Yes
 
Job Number: MB-R8218516
Job Location: El Segindo, CA
Rate: open
Per Diem: no
Duration: 12-18 months
Input Date: 06/18/2018
Last Updated: 06/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
We are seeking a experienced Project Engineer for a company here in Covington VA. The Project Engineer’s primary responsibility is to function as the project manager for multiple capital projects across the entire facility. They are responsible for managing their projects from scope development to project closure. Additionally, project engineers provide support to Maintenance and Production to achieve the plant’s safety, reliability, and production goals.



Responsibilities

Manage and execute capital projects at the Covington facility. Average project load averages $4-5 million per year with projects ranging from $50k to multi-year projects of $20MM.
Provide engineering expertise to Operations and Maintenance to help resolve various operating problems.
Manage all phases of capital and expense repair projects from inception through equipment installation, start-up, and project closure.
Coordinate with Operations, Maintenance, management and other project stake holders on an ongoing basis.
Lead all phases of the project process to include: project scopes, cost estimates and schedules, 'Authorization for Expenditure' request forms, preparation of drawings for assigned projects by working with consultants, vendors, and plant personnel, etc.
Coordinate the different disciplines within the Engineering Department on assigned projects.
Analyze quotations for equipment and installation labor and recommend suppliers.
Initiate purchase requisitions for equipment, labor, and materials for assigned capital and repair projects.
Manage the direction of consultants, contractors, and maintenance work associated with assigned capital and repair projects.
Manage the financial aspect of assigned capital projects in SAP to ensure budgets are adhered to and assets are properly created and managed.

Requirements


Qualifications:

BS Degree in Engineering with 5+ years related experience with emphasis on project management.
Interpersonal skills such as building close working relationships and facilitating team discussions are important elements.
Excellent problem solving and troubleshooting skills.
Adaptability to rapidly changing working environments and operational situations.
Excellent time management skills, the ability to create and execute to a budget and deadline, and the ability to make timely decisions.
Physical ability to operate in a manufacturing environment, including light to moderate lifting, walking and climbing, oral communication, correctable vision, and ability to work in a hot or cold, humid, dusty, outdoor environment.
Excellent computer literacy in word processing, spreadsheets, electronic mail and presentation graphics, etc. Experience working with SAP and CAD skills are preferred
 
Job Location: Covington, VA
Overtime: Yes
Start Date: ASAP
Input Date: 05/08/2018
Last Updated: 06/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

R&D Avionics & Electrical Tech

Description:
General Summary:
The Avionics & Electrical Technician installs, maintains, and repairs electronic equipment.

Duties and Responsibilities:
  1. Inspects tests, adjusts, and repairs avionics equipment, such as radar, radio, pulse, navigation, auto pilot, and compass systems, installed in aircraft, using hand tools and test equipment.
  2. Inspects components of avionics equipment for defects, such as loose connections and frayed wire, and for accuracy of assembly and installation.
  3. Tests avionics equipment under simulated or actual operating conditions to determine performance and airworthiness, using test equipment, such as oscilloscopes, digital meters and counters, and circuit analyzers.
  4. Adjusts, replaces, or repairs defective components based on analysis of test results, following blue prints, schematics, handbooks, and other technical documents.
  5. Calibrates installed or repaired equipment.
  6. Responsible for flight test instrumentation and modification
  7. Provide ground operation support for Flight Test
  8. Maintains record of repairs.

Education, Work Experience, Certification and/or Licensure:
  1. High School Diploma or equivalent.
  2. Experience with flight operation support required.
  3. Experience with aircraft wiring, repair or wiring modification required.

 
Knowledge, Skills and Abilities:

  1. Strong oral and written communication skills.
  2. Ability to understand wiring drawings.
  3. Strong skills in avionics and airframe and power plant technical support including installation, repair, and fabrication support.
  4. Strong interpersonal skills and judgment in mechanical repair and fabrication situations and in addressing engineers and their design and modification needs.
  5. Strong knowledge of glass cockpit avionics systems; troubleshooting; ringing out; wiring diagrams; wiring needs; and wiring practices,  mods, and terminations. 
  6. Ability to interface with internal engineering support and outside suppliers and vendors and project a good professional image.
  7. Must have good prioritizing skills and strong team skills.
  8. Must be willing to travel as needed and be able to be flexible and to change direction rapidly as situations change.
  9. Flexibility to various schedules and overtime.

 
Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  
  9. Ability to work tight space, high place and outside environment.

 
Job Number: 1810085139
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 04/20/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPFtAAM&URLSource=cjhunter

RS Avionics/Elec Tech II

Description:
PDS is seeking a Avionics/Electrical Technician II for an open position in Brunswick, GA.

Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. 

Principal Duties and Responsibilities:

Essential Functions: 1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. 2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 3. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. 4. Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. 5. Performs and complies with engineering changes and modifications as required. 6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. 7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. 8. Tests and maintains test equipment, electronic systems, and components. 9. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 10. Adapt to sudden schedule changes. 

Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 2. Performs other duties as assigned. 
 


 

Education and Experience Requirements:

High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Four (4) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and two (2) years related experience.

Unique Skills:



Unique skills: Required Experience with Avionics software loads and aircraft maintenance interfaces.

Other Requirements:
1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. Ability to read and interpret basic blueprints and schematic diagrams. 3. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. 4. Must be able to climb stairs and ladders, work in confined areas and lift up to 80 pounds.
 


 
Job Number: 1810083669
Job Location: Brunswick, GA
Duration: 6 months
Input Date: 04/03/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mKIRAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Real Time Simulator Engineer with active secret GA

Description:
161876
Requirement# AERO-REQ-0814
Work Location Marietta, GA (86 South Cobb Drive, Marietta, GA 30063)
Work Week9/80-A
Priority High
Needed Date 05/21/2018
End Date 08/19/2019
Number of Resources1
Security Clearance Secret

Title Real Time Simulator Engineer
Description
The selected candidates will become a technical staff member for laboratory development for F-22 and F-35 Pilot-in-the-loop simulators. The specific assignment will be the development of real-time software products in Ada and C++ to be used in the F-22 and F-35 Labs. The successful candidate can expect simulation and modeling assignments in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for man-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars. These software models will be developed in primarily in Ada with some C++. A Bachelor Degree or Master\'s Degree in Electrical Engineering or Aerospace Engineering with significant software development experience and simulation / modeling experience are preferred for these positions. However, other technical disciplines (Physics, Math, Computer Science, Computer Engineering, etc.) will be considered along with relevant work experience for applicability to this position. Prior use of Ada and C++ software languages is required as well as direct experience with real-time software systems and environments. Excellent communication skills, computer skills, and computer architecture knowledge and domain knowledge in simulation and/or real-time embedded software system is desired. Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. An active Secret clearance is required for this position. Development work uses C++, Ada, limited Python, Eclipse, DOORS, Dimensions, UML, and AdaCore GnatPro Studio (GPS).
Skill/Experience/Education
Mandatory

Experience required with developing real-time embedded software in C++ and/or Ada. Must have a proven ability to work well in a team environment. Excellent software development skills and experience
Desired:

Domain expertise in one or more of the following areas: RF and IR signatures, Electronic Warfare, Aircraft and associated Avionics for pilot-in-the-loop simulation, Aircraft Control and Propulsion Systems, air-to-air and/or surface-to-air missiles, air-to-ground weapons, missile control systems, expendable countermeasures, ground-based early warning, acquisition, and tracking radars. Object Oriented Analysis and Design using UML
.

Job Description

Interview Required No
OT Allowed No
Travel No
Non-Exempt
Rate Type Per Hour
Rates
0-4 Yrs Pay Rate: 55.00 USD
5-8 Yrs Pay Rate: 65.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0814
Job Location: Marietta, GA
Rate: 55-75/hr DOE
Per Diem: no
Overtime: OT Allowed No
Duration: 15 months
Input Date: 05/18/2018
Last Updated: 06/05/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. POWER ELECTRONICS AND CONTROLS ENGINEER

Description:
DESCRIPTION OF DUTIES AND RESPONSIBILITIES:

The Sr. Power Electronics and Controls Engineer will lead the development of a variety of power conversion devices and motor control systems from early stages of design through final testing and manufacturing support. Perform analysis and simulation of control loops and circuit elements to ensure product performance and reliability. Provide leadership in development of design processes for power electronics that result in predictable high value design outcomes. Work effectively with manufacturing engineering, planning, and procurement to ensure that new designs flow predictably into production, meeting cost, DFX, and other required goals.

QUALIFICATIONS AND NECESSARY BACKGROUND:

• Proven performance in design of high power system products

• Design for EMC including circuit board layout, control, and filter design.

• Control loop design and optimization.

• Ability to work effectively in a multi-discipline team (engineering, manufacturing, planning, purchasing, field service, marketing, etc.)

• Must be able to complete complex tasks with minimum supervision

• Ability to understand complex systems from engineering documentation.

• Strong problem solving and root cause analysis skills.

• Good knowledge of automotive standards and test methods preferred.

• Experience with planning, executing and managing outsourced developments (partial or turn-key)

• Experience in design requirements for regulatory requirements (UL, CE, NEC, etc.)

• Excellent organizational and communication skills including ability to communicate and foster communication between collaborating groups.

• Experience developing-for, transitioning and maintaining test platforms for use at contract manufacturers, particularly in Asia

• Off line and DC/DC power electronics and Magnetics design for high frequency switching power supplies.

• IGBT and MOSFET operation and drive techniques, design for Power Factor and power factor correction

• Thermal design

• BSEE and minimum 7 years of applicable experience in three phase and DC/DC high frequency power supplies.

• MSEE preferred.
 
Job Number: 364436
Job Location: Monrovia, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6 Months +
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRAIN GAGE APPLICATION TECH / Instrumentation Specialist Lead

Description:
JSG is seeking an Instrumentation Specialist Lead for a 15+ months contract opportunity in West Palm Beach, FL!

Description: Strain Gage application Technician:

The successful candidate shall meet the following requirements:- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 15 Years or more of experience.- Minimum of 10 years’ experience in the field of strain gage application to support test instrumentation -Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. Experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Experience troubleshooting and repairing strain gage measurements. - Familiarity with electronic tools such as multi-meters, oscilloscopes, logic analyzers, etc.- Solder/de-solder experience required.
Experience reading wiring diagrams and interpreting schematics and engineering drawing.
Manages building and maintenance of instrumentation systems for Flight Test programs to provide measurement data required by the Engineering Department. Apply instructions prepared by aircraft technicians in the form of travelers, Assist in the preparation, installation, check-out and operation of instrumentation systems, follow planned maintenance / calibration, and standard operating procedures for all instrumentation and control equipment in order to maintain accuracy of data and ensure its validity, and operate DAS (data acquisition system) and other recording equipment.
 
Job Number: 364851
Job Location: West Palm Beach, FL
Per Diem: Possible
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS PROJECT MANAGER

Description:
JSG is seeking a Systems Project Manager for a DIRECT HIRE Opportunity for our client in Los Angeles, CA!

Position Summary
Systems Project Manager will act as project leader for multiple project teams. As project leader, the Systems Project Manager will coordinate activities of the project design team and production personnel, and also be the point of contact for communication with the customer.

Duties

Project management role from purchase order to shipment. Project management includes: setting and meeting project parameters such as cost, schedule, performance, and deliverables.
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Project schedule development using critical path method covering all tasks from PO to shipment including those for which others are responsible for performing.
Post-booking activities include: detailed design and documentation for custom portions of specific projects, re-using existing hardware and software subassemblies as much as possible to minimize engineering content of complete delivered system.
Prepare, schedule and conduct design reviews with customer, engineering and operations.
Implement change orders to accommodate change of project scope.
Weekly customer communication to report on progress, schedule status, and when necessary delays and schedule recovery plans.
Coordinate acceptance test requirements, sample materials, laser application, machine readiness, customer visit schedule, and lab resources for acceptance tests. Manage acceptance test and handle all exceptions necessary to secure customer sign-off.

Requirements

5 years of experience managing technical projects in factory automation, laser processing or related industry.
Current Project Management Professional (PMP) certification.
Four-year degree in Mechanical, Electrical, Software or related Engineering curriculum.

5 years of experience managing technical projects.
Demonstrated experience in successfully driving and delivering projects (on time, on budget and to customer satisfaction).
Communicate well orally and in writing with customers and others with whom he/she works with within and outside the Engineering department.
Experience with project management tools including MS Project, Visio, Excel, Word.
Ability to travel occasionally. (2 weeks per quarter)
 
Job Number: 365405
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 04/20/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Advanced Engineering Technician

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Senior Advanced Engineering Technician
(US Citizenship Required*)
Pittsfield, MA
2018-5943

Responsibilities:
• Perform functions associated with all manufacturing operations, using a variety of systems, involving an application or technical skills in specific area (electrical, testing, manufacturing, etc)
• Work with engineers in developing process procedures, assembly instructions, process set-up, preventive maintenance and/or calibration tasks
• Determine rework processes and quality testing or inspection related to the production of parts, components, subassembly's, and final assemblies.
• Use sophisticated programs to author and issue work plans and/or collect and evaluate operating data to conduct on-line adjustments to products, instruments or equipment.
• Determine and develop procedures to execute, control, or modify the manufacturing process.
• Assemble precision electromechanical products
• Drill, ream, burnish, and tap; use precision measuring instruments to ensure conformance to tolerances; disassemble precision assemblies to correct malfunctions
• Open to new ideas, champion change, and support change when directed from management
• Work from schematics diagrams, written and verbal descriptions, layouts or defined plans to build, test, and troubleshoot
• Work with associates in other departments and understand cross-functional relationships
• Analyze results and implement procedures for problem
• Measure work piece with instruments such as electronic gauges and optical light; compare dimensions with specifications to ascertain amount of stock to be removed; evaluate compounds, diamonds, and lap material needed to achieve specifications and set-up requirements
• Prepare and condition surface of lap to achieve proper geometric form and tolerance per requirements
• Apply compound to work piece and rub lap across it with rotary or reciprocating motion, feeling friction and applying required pressure to attain specified tolerances
• Verify conformance to specifications via complex measurements
• Verify conformance of work piece to process specifications requirements
• Manually handle parts with care to prevent surface defects
• Keep equipment and work area clean and orderly
• Design and draw sketches for tooling and laps to complete task
• Promote continuous product improvement by conceptualizing and implementing new procedures, processes or fixtures
• Travel – 25% of the time, for training.

Qualifications:
• Able to work under a scope for long periods of time at 40x magnification
• Able to read blueprints, sketches and drawings
• Adapts to new training and demonstrates competence in site-specific skill sets
• Good analytical and problem-solving skills
• Manual dexterity, good eyesight, attention to detail, and a great deal of concentration and patience
• Working knowledge of theory, design, operation, and function of accelerometers and gyroscopes
• Experience working in an ISO/clean room/instrument or medical device manufacturing environment.
• Background in watchmaking or other experience in miniature precision devices is desirable
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline or equivalent required
• 5 years minimum of relevant experience required.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5943
Job Location: Pittsfield, MA
Rate: Based on experience
Input Date: 05/10/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
~ Looking for someone that is skilled in engines, preferably in the Automotive, Aircraft or Military Industry; Mechanical assembly may be considered, but engine experience is ideal.
~ Individual will be tearing down aircraft engines and preparing for rebuilds (strictly mechanical, not electrical).
~ MUST have familiarity with equipment (hand tools, pneumatic, drill presses, rivet guns, etc).
~ MUST be computer literate; some data entry using Excel to document evaluation results
~ No harness experience necessary

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 017_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 08/06/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Senior Electrical Engineer - MD - C

Description:
Chipton-Ross is seeking a Senior Electrical Engineer located in Patuxent River, MD

RESPONSIBILITIES:
Government Contract - Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs

Provide electrical engineering support to Research, Development, Test and Evaluation (RDT&E) programs for military aircraft/weapon systems, including planning, directing, and/or participating in aircraft and laboratory testing. Prepares procurement specification inputs, interface drawings, installation design packages, and calibration procedures to accommodate unique test requirements. Oversees systems modifications, installation, integration, and checkout functions. Performs test planning, data collection, and test data analysis. Functions entail providing support for electrical power quality testing and evaluation, including voltage and frequency transients/modulation, voltage distortion, and power interruption on various aircraft, shipboard, ground vehicle, and vendor prototype components and equipment. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Projects will interface test articles with programmable power supplies and data acquisition equipment to conduct power quality tests, followed by analysis of test article responses for compliance with MIL-SPECS/MIL-STDs. In particular, candidate must have experience with Interface Standards for input power to military and aircraft contained in MIL-STD-704, military vehicles contained in MIL-STD-1275, and FAA RTCA DO-160. That experience must also include interpreting guidance for test procedures specified in MIL-HDBK-704 parts 1 through 8. Position also requires knowledge of test planning, data collection, data analysis, test report writing, and presentation of results. Further requirements include specialized knowledge and experience in the design, installation, operation, calibration, maintenance and repair of power quality test facilities, associated equipment, and their control systems. Duties may include performing other tasks for propulsion and power as directed.

REQUIRED EXPERIENCE:
Experience: Experience working with research, development and testing with respect to requirements and characteristics of propulsion and power equipment performance. Experience must include conducting tests to generate extreme power conditions meeting specification for standardized test regimes then conducting performance tests of electronic and electrically-powered equipment after exposure to test conditions. Applying test conditions to include extremes with respect to voltage, frequency, modulation, distortion, and other characteristics. Performing tests post exposure to extreme conditions to verify operation remains within specification and the equipment continues to function reliably in-service. Experience with MIL-STD-704, MIL-STD-1275, and FAA RTCA DO-160 required. Must have demonstrated experience directing, monitoring, and/or participating in the installation, configuration, calibration, and operation of engine test systems, environmental chambers, associated instrumentation, and/or data acquisition systems used for testing propulsion and electrical power systems. The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material.

Knowledge, Skills and Abilities: The candidate should be capable of managing programs including writing proposals, developing program plans, and providing briefing material. Functions involve applying engineering principles to modify and upgrade laboratory electrical and instrumentation systems in support of power and propulsion RDT&E programs. Applying analysis and test methods demonstrating equipment compliance to power characteristics. Ability to develop test plans, design test equipment, establish protocols and procedures specific to individual test articles following guidance provide in DoD, FAA, and other documents. Knowledge in applying programmable power sources with appropriate software and firmware needed to generate waveforms specified by test standards. Knowledge of MIL-STD-704 and the eight parts of MIL-HDBK-704 for aircraft systems. Knowledge of MIL-STD-1275 for Military Vehicles.

Equipment and Machines: Ability to operate office equipment such as personal computer, printer, copy machine, telephone, fax machine and other equipment including desk supplies and other work related tools as required. Ability to operate power test systems to include programmable AC/DC power sources, power analyzer, test management and control systems, laboratory measuring, environmental chambers and other equipment required to provide test conditions, manage test sequences, and perform measurements of test parameters. Ability to perform or facilitate calibration and repair of laboratory testing and measurement systems.

Attendance: Monday-Friday. Regular attendance of scheduled hours is extremely important, but not critical, except for deadlines and meetings. Punctuality and regular attendance are necessary to meet deadlines. Must exhibit flexibility of work hours to adjust to surge situations based on critical mission requirements that may require evening and weekend hours. Must demonstrate professional behavior at all times when dealing with customers, management and co-workers. Must have clear, concise and accurate communications skills, both verbal and written. Grooming and dress must be appropriate for the position and must not impose a safety risk to employees or others. Must maintain a positive work atmosphere by behaving and communicating in a professional manner. Independent personal transportation to work site is required. Some travel is required to support projects; this may involve airline travel. Power quality testing will typically be performed in a laboratory environment. Some test protocols may require testing in the field and potentially in a shipboard environment.

PREFERRED SKILLS
Prior DOD acquisition work experience is preferred. Familiarity with NAVAIR Propulsion and Power Laboratories and related competencies also preferred.

ADDITIONAL NOTES
Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.

EDUCATION:
Accredited Bachelor's Degree in Electrical Engineering (EE) from ABET accredited university required with a minimum of 8 years' experience supporting RDT&E to include 6 years performing functional aspects as described in the roles and responsibilities. Master's Degree in Electrical or other Engineering related discipline a plus.

WORK HOURS:
Full-Time

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 170643
Job Location: Patuxent River, MD
Rate: $DOE
Duration: 3 MONTHS
Input Date: 04/30/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electronics Assembler

Description:
Notes from Hiring Manager: Hours are 7:00 AM to 3:30 PM

* Looking to hire four (4) Senior Electronics Assembler's that specifically have 4 – 5 years of Cable & Harness Experience
* They should be familiar with crimpers / military connectors, solder sleeves, and daisy chains
* RF Cable Experience and Commercial experience/HVAC/PC Boards/Etc. are not relevant

Summary:

Looking for a Senior Electronics Assemblers to perform complex assembly of harnesses, cables and electronic parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates complex electronic assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including very complex harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves complex manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> Sets up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years extensive experience specialized in building harnesses, cables & electronic assembly techniques.
> Military and commercial quality specifications.
> Planning, leadership, and organization skills.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to apply cost/quality control methods & set up/operate all fabrication equipment in area assigned.
> Ability to concentrate while discriminating colors & small details.
> Excellent math skills, hand / eye coordination and finger / hand dexterity.
> Electrostatic discharge procedures and methods.
> Ability to work independently, as well as working well with others.
> High School diploma, or equivalent education (GED) with the ability to successfully perform the job duties.
> MUST BE US CITIZEN
 
Job Number: 004_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 07/03/2018
Last Updated: 07/20/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Sensor and Systems Technician - MD - C

Description:
Seeking Sensors and Systems Technicians to join its Assembly team within the Manufacturing organization. These positions are located in Linthicum, Maryland.

The Sensors and Systems Technician will perform a variety of simple to complex tasks involving testing, operating, trouble-shooting calibrating, constructing, repairing and assembly over a broad spectrum of technologies, utilizing manual and automatic equipment, Utilize and create repair techniques, assembly techniques and procedures. Other tasks to be performed include: collecting, recording, analyzing and evaluating data and recommending changes in processing operations and equipment as appropriate.

RESPONSIBILITIES:
" Test technician, testing assemblies for radar systems.
" RF testing
" Verifying that the assemblies meet the requirements of the drawings.
" Troubleshooting down to the component level
" Assisting engineering in creating designs and design changes
" Will be involved in test set ups, systems and device repair of faulty areas
" Will be using network analyzers, spectrum analyzers, power meters, signal generators, O-scopes

Requirements:
" Minimum of an associate's degree in electronics. Bachelor's in electronics is acceptable. Must have a minimum of 60 credits.
" If they don't have an AA degree, they can have 6 months of military training in electronics.
" Must submit either academic transcripts or military documents (DD-214, Joint Service Transcript, SMART transcript, or VMET) showing that they meet the education/training requirement.

EDUCATION:
Minimum of an associate's degree in electronics. Bachelor's in electronics is acceptable.
Electrical engineering typically isn't accepted.
" If they don't have an AA degree, they can have 6 months of military training in electronics. Typical occupations in the military that would meet this would be (*** indicates the most ideal):
o Electronics Technicians/ US Navy "A" school or Radar "C" school***
o Avionics Technicians/ Aviation Electronics Techs***
o Fire-controlman
o Sonar Technicians
o Ground Radio Operators/Repairman
o Air traffic control tech


Other info:
" Multiple shifts available-2nd (3:30 PM -Midnight), 3rd (11PM-7:30 AM), 4th (Friday-Sunday 7AM-7PM) and 5th (Friday-Sunday 7PM-7AM). Candidates must be able to work one of these shifts.
" Paid OT, 1.5x Mon-Sat, 2x on Sun.
" Shift differential for working 2nd or 3rd shift.
" Must be comfortable being a part of a union

Test:
" Candidates must pass a technician test prior to interviewing. Candidates should have knowledge of these topics.
" Test is administered at our BWI site in Linthicum, MD where the position is located. It starts at 8 AM and goes until 3 PM. If they pass, they will interview with the hiring manager right after the test.
" For non-local candidates, client will coordinate their travel and cover the expenses.
" Our next test dates are 3/1, 3/15, 3/22, 3/29

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 168820
Job Location: Linthicum, MD
Rate: Up to $30.00 DOE
Duration: Direct
Input Date: 03/06/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer CA

Description:
Request number: 5362
Date created: 05/03/2018
Job title: Software Engineer
Number of openings: 1
Job type: Engineering/IT/Professional
Position location: Torrance - CA
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 45
Start Date: 05/14/2018
Tentative End Date: 11/14/2018

Job Description
Function: Software Engineer (Airborne Flight Critical and Ground Test Software)

Responsible for the development of flight critical software following DO-178C guidelines and ground based test stand software.
Essential job functions: Essential job functions: 1. Responsible for developing flight critical software in accordance with DO-178C guidelines. Develop the software requirements, design and code and verify the software produced against the requirements using Requirements Based Tests (RBT). Tracing requirements to design to code (and the reverse) as well as requirements to test cases (and the reverse).

2. Responsible for developing ground based test stand software using dSpace and Python to test electronic boxes and electro-hydraulic actuation systems. Software development will be a relaxed form of DO-178C with a minimum of software requirements, code and verification.

3. Software: C and Python languages a must and dSpace (ControlDesk and AutomationDesk) experience highly desired. LabVIEW experience is a plus.
Documentation: DOORS for requirements as well as Microsoft Office.
Required skills: Required skills: Candidate must be proficient in software development using C, Python and dSpace (LabVIEW experience a plus). Must be knowledgeable using Windows applications such as Visio, Word and other Microsoft Office tools. Must be willing to take direction and execute assignments as asked. Must be self-motivated and willing to take ownership of assignments and look for ways to execute on time and on budget. Must be willing to report status to Project leads.

Education: Education: Bachelor degree in Electrical Engineering and 5 or more years of experience in the areas listed above preferred.


Request status: Open
 
Job Number: MB-5362
Job Location: Torrance, CA
Rate: 45/hr max
Per Diem: no
Overtime: non-exempt
Duration: 6 months
Input Date: 05/03/2018
Last Updated: 06/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / C++ 1553 CA

Description:
161743
Requirement# AERO-REQ-0764
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 02/28/2018
End Date 06/01/2019
Number of Resources 1
Security Clearance Secret


Title Software Engineer
Description
The Skunk Works (Lockheed Martin Advanced Development Programs) is seeking world class talent in Mission Systems and Software to be a part of a team that will carry on our 70 year tradition of making history in advanced aircraft development.The selected applicant will utilize advanced technical concepts in support of software products within Advanced Development Programs (ADP). The applicant will be responsible for the design, development, integration, and testing of airborne avionics embedded software, ground-based application software, and/or simulation software. Applicant must be able to support the full software development life cycle – including requirements and configuration management - and work in a mature software process environment. The position requires interfacing with various disciplines, including Systems Engineering and Integration & Test. Applicant must be capable of independently designing and creating software solutions based on limited information on rapidly evolving projects. This role requires a highly motivated, organized engineer that is familiar with all aspects of mission systems development. Applicant must have excellent oral and written communication skills.The applicant may gain experience in avionics subsystems such as navigation guidance, data links, communication links, stores management, weapons integration, mission computers, electronic warfare, serial interfaces, analog and digital I/O, and networking.

Skill/Experience/Education
Mandatory:

Embedded software development using C or C++ Development of real-time systems or use of real-time operating systems (RTOS), such as Wind River VxWorks or Green Hills Integrity

Desired:

Experience with the following: - Developing software for air vehicle or mission systems - Rhapsody or other model-based software development - Integrating hardware and software - Data Acquisition and telemetry systems - MIL-STD-1553 - MIL-STD-1760 - Configuration management



Interview Required Yes

Shift 1st Shift

OT AllowedYes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0764
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 4 months +
Input Date: 05/11/2018
Last Updated: 05/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Mechanical Engineer II / no clearance / CREO TX

Description:
8164369
Sr Mechanical Engineer II
McKinney TX
6 months
no clearance / ability to obtain secret

The Sr Mechanical Engineer II is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground and airborne defense. Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures. Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.

Applies extensive technical expertise in Mechanical Engineering, and has full knowledge of other related disciplines (Thermal, Structural, Electrical, and Optical). Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses.

Guides the successful completion of major programs. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.

Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical designer to understand tasks involving conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.


Hours: 8:00am to 5:00pm
Location: TX190 2501 West University McKinney TX United States

Required Skills:
• Hands on experience in Electro-optical sensors
• 3D CAD software experience
• Geometric Tolerancing (GD&T)
• Able to present to customer
• Maintain positive customer and supplier relationships
• Ability to obtain security clearance
• At least 8 years of professional experience

Desired Skills:
• Creo CAD software
• Prior experience in DoD or Aerospace

Required Education:
• A Bachelor's degree in Mechanical Engineering or related Engineering field
• Minimum 8 years related experience This position requires a U.S. person or the ability to obtain an Export Authorization from the appropriate government agency for non-U.S. persons.


Contractor Work Week 5/40
Bachelor Degree Required? Yes

U.S. Citizen Required? Yes

Security Clearance Required Unclassified
Is an active clearance required to start? No
 
Job Number: MB-8164369
Job Location: McKinney, TX
Rate: 50-60hr DOE
Per Diem: no
Duration: 6 months
Input Date: 05/07/2018
Last Updated: 05/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr QA Engineer CA

Description:
Request number: 5325
Job title: Sr QA Engineer

Number of openings: 1
Job type: Engineering/IT/Professional
Position location: Chatsworth - CA
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA

Driving on company time?: No
Minimum Years of Experience: 6
Maximum Hourly Pay Rate: 55
Start Date: 05/07/2018
Tentative End Date: 11/07/2018

Job Duties:
Reports to the Supervisor of Quality Engineering and is self-motivated to follow through on assignments with limited supervision. Responsible for planning, implementation, and administration of complex Quality Programs to assure that a system is in place to meet or exceed contractual quality requirements.
Essential job functions: Provides for program compliance with internal and external requirements within:
1. Project Engineering:
Provides varied technical support including engineering concepts, statistical methods, and Quality Technology. Provides personal contact with internal and external personnel from technical disciplines.
2. Inspection Planning:
Provides inspection plans for receiving inspection, manufacturing operations, assembly & test processes, and final inspection.
3. Quality Planning: Provides planning, development, implementation, and administration of cost effective and complex Quality Programs.
4. Contract Compliance: Assures compliance with contractual issues for complex programs relative to quality, including coordination of customer, government, regulatory agency audits, and flow-down of contract requirements to suppliers and appropriate Moog disciplines.
5. Program Support: Provides technical assistance to internal and external technical disciplines in the resolution of fabrication, and field related problems.
6. Failure Analysis & Corrective Action: Conducts complex Failure analysis by utilizing his organizational, technical knowledge, analytical and communication skills to find the root cause and implement closed loop corrective solving.


Preferred Skills:
Fluent with Tip Technologies’ TipQA application.

Electronics and Electromechanical design for spaceflight, GIDEP assessment and response, Supplier Quality Management.

Education: Education Requirements:
BSME and six years’ experience in Quality Engineering. Must have mastery of military specifications most frequently encountered in quality programs and should have a specialized technical understanding of Moog products as well as manufacturing, assembly, and functional test methods. The incumbent must be a proficient user of various statistical, spreadsheet, word processing, and database software packages

Request status: Open
 
Job Number: MB-5325
Job Location: Chatsworth, CA
Rate: 55/hr max
Per Diem: no
Overtime: non-exempt
Duration: 6 months
Input Date: 05/07/2018
Last Updated: 06/04/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Sr Systems Engineer II (RADAR) - DoD Secret Clearance. Marlborough, MA 01752

Description:
PDS TECH INC. has an exciting opportunity for the role of,  Sr Systems Engineer II- DoD Secret Clearance  in Marlborough,MA 01752

CONTACT: Sana Khan,   DIRECT#: 314-665-2124,   EMAIL: skhan@pdstech.com  

Also Share this job with your friends and get rewarded with an exciting Referral Bonus. 

NOTE: 6 Months Contract. Applicant must be a US Citizen and Must Have Active DoD Secret Clearance ​
 
Work Week  9/80 


Summary:


  • System Engineers in this position will be responsible for supporting radar system concept development, architectural design, requirements generation and flow down, modeling and simulation, systems analysis, integration, test and evaluation.
  • The successful candidate will be expected to perform system engineering trades studies to determine solutions to technical issues, and work within multi-discipline development teams across multiple locations to coordinate the development and integration of products, support customer intimacy for areas of responsibility. 


This position is posted as a SADID opportunity, however the candidate would be considered for departments within SADID based on the departmental needs. 

Required Skills: 
• Bachelor’s Degree in Engineering, Science, or Mathematics and 4(+) years of experience in the field of engineering or related technical discipline 
• Current DoD Security Clearance 
• Experience with system level requirements development, documentation and maintenance 
• Understanding of radar system concepts; detection, discrimination, track and signal processing algorithms and their behaviors and performance 
• Ability to develop and code system models, algorithms, test vectors and analysis tools in support of analyzing radar requirements and performance 

Desired Skills: 
• Prior experience with DoD Radar Design and Development Programs 
• Design experience in the following radar system areas; antenna, receiver/exciter, waveforms, digital beamforming, multi-sensor track management and data fusion, adaptive signal processing, clutter mitigation techniques, electronic attack and electronic protect, sensor resource management and mission planning 
• Familiarity with IPDS, internal reviews and gate reviews (particularly associated with SRR, PDR and CDR). 
• Strong analytical background 
• Proficiency with Matlab, C/C++, Java 
• Knowledge of and ability to work within the Agile Scrum development practice 
• Experience with Microsoft Office Suite and IBM Architecture/Requirements Tools (DOORS, Rational Rhapsody, Rational Publishing Engine, etc)
 
Job Number: 1810084883
Job Location: Marlborough, MA
Duration: 6 months
Input Date: 04/20/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sana Khan
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNvLAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
Sr. Electrical Engineer – Hardware Circuit Board Design
Expected to last 24+ months
Cedar Rapids, IA

Description:
This position focuses on circuit board designs for digital hardware in communication products. We are seeking a highly motivated Senior Electrical Engineer to join the digital hardware design group within Government Systems Communication Engineering. Electrical Engineers perform activities that span all phases of the hardware development lifecycle, including requirements capture, design, integration, verification, factory transition, and customer interface.

This engineer will develop digital hardware circuit boards used in high performance communication products, such as sophisticated software-defined radios and data links. Primary assignments will include use and application of electrical engineering principles and techniques to design, develop, document, verify, support, and troubleshoot digital hardware of moderate to high complexity, such as multiple hardware components or mixed electrical technologies, for airborne and ground communication products. This position encompasses new design and product sustaining support roles. The selected candidate will work closely with Systems, Software, Mechanical, Environmental Effects, Manufacturing/Operations and Design-to-Cost staff to assure defined requirements are consistently met in all phases of a product's lifecycle.

Candidates must have the following skills:
-Candidate selected will be subject to a government security investigation and must meet eligibility requirements.
-Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline
-Circuit board design experience including experience with schematic capture tools
-Domain knowledge of digital electronics and experience with digital electronics design principles and techniques (e.g. Microprocessor/microcontroller, DSP, FPGA, ASIC, ADC, DAC) including experience working with lab equipment (Oscilloscopes, Analyzers, etc.).
-Experience in aspects of the digital hardware life cycle, including requirements capture, design and development, debug and test, and requirements validation
-Ability to effectively communicate in a professional manner and produce detailed, clear and concise technical documentation.

Desired Experience/Skills:
-Experience with Signal integrity and timing analysis tools such as Hyperlynx and/or Timing Designer
-Knowledge of FPGA, ARM, and DDR memory is highly desired.
-Knowledge in the area of high speed design practices including signal integrity is also desired.
-Working knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay). Includes knowledge of computer hardware components (e.g., processors, memory, interfaces), and characteristics (e.g., throughput, processing architecture, timing, capacity).
 
Job Number: 53774
Job Location: Cedar Rapids, IA
Rate: 63.00
Per Diem: Possible
Overtime: Possible
Duration: 24+ months
Start Date: 05/08/18
Input Date: 04/11/2018
Last Updated: 05/14/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Analyst 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Staff Analyst 3
(U.S. Citizenship Required*)
Huntington Beach, CA
2018-5940

Responsibilities:
• Support managers on the executive payroll.
• Coordinate and process domestic and international business travel arrangements
• Monitor designated business traveler's logistics
• Generate expense reports and assist in reconciling corporate credit card changes to ensure timely and accurate reimbursement
• Verify payments to corporate credit cards.
• Collect and compile data to provide visibility of status for traveler's review and/or signature.
• Create, edit, and maintain electronic and written communication.
• Track and maintain information relative to department and business operations.
• Verbally communicate a wide variety of information to multiple audiences.
• Process incoming and outgoing communication and correspondence to ensure proper dissemination of information.
• Prioritize and schedule management-level employee time and availability for efficient use of time.
• Track and maintain designated conference room schedules for availability and efficient use of resources.
• Coordinate with the appropriate focal(s) to support the acquisition and maintenance of resources.
• Order and maintain office supplies.
• Plan and implement logistics for executive level internal and external events.
• Schedule and maintain meetings and calendar.

Qualification:
• Must be proficient using MS Office (Word, Excel and PP), prepare charts for executives.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5940
Job Location: Huntington Beach, CA
Rate: Based on experience
Duration: 29 Weeks, 3 Days
Input Date: 05/07/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Peggy Holcombe
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
Active Secret Clearance Required

Description/Comment:
The Systems Architecture Design and Integration Directorate (SADID) is seeking engineering professionals to be part of the System Engineering teams that design and develop world-class Surveillance Radar programs in our Marlboro, Woburn and Tewksbury MA locations.

System Engineers in this position will be responsible for supporting radar system concept development, architectural design, requirements generation and flow down, modeling and simulation, systems analysis, integration, test and evaluation. The successful candidate will be expected to perform system engineering trades studies to determine solutions to technical issues, and work within multi-discipline development teams across multiple locations to coordinate the development and integration of products, support customer intimacy for areas of responsibility. This position is posted as a SADID opportunity, however the candidate would be considered for departments within SADID based on the departmental needs.

Required Skills:
* Bachelor’s Degree in Engineering, Science, or Mathematics and 4(+) years of experience in the field of engineering or related technical discipline
* Experience with system level requirements development, documentation and maintenance
* Understanding of radar system concepts; detection, discrimination, track and signal processing algorithms and their behaviors and performance
* Ability to develop and code system models, algorithms, test vectors and analysis tools in support of analyzing radar requirements and performance

Desired Skills:
* Prior experience with DoD Radar Design and Development Programs
* Design experience in the following radar system areas; antenna, receiver/exciter, waveforms, digital beamforming, multi-sensor track management and data fusion, adaptive signal processing, clutter mitigation techniques, electronic attack and electronic protect, sensor resource management and mission planning
* Familiarity with IPDS, internal reviews and gate reviews (particularly associated with SRR, PDR and CDR).
* Strong analytical background
* Proficiency with Matlab, C/C++, Java
* Knowledge of and ability to work within the Agile Scrum development practice
* Experience with Microsoft Office Suite and IBM Architecture/Requirements Tools (DOORS, Rational Rhapsody, Rational Publishing Engine, etc.)
 
Job Number: MA42199
Job Location: Marlborough, MA
Rate: 80.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Input Date: 05/11/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Systems Engineer 3 (7) - CA - C

Description:
Chipton-Ross is seeking 7 Systems Engineer 3's located in El Segundo, CA.

RESPONSIBILITIES:
Satellite Systems Engineer (Level 3) Contractor for the Satellite Ground Operations and Product Team located in El Segundo, California. Tasking includes full life-cycle development, integration and test in the satellite ground command and control. Assists with the development and test of electronic and electrical system requirements. Performs system tests to verify operational and functional requirements. Supports resolution of product integration issues and production anomalies. Primary Responsibilities:
Assists, without supervision, with the validation of system-of-systems concepts or system concepts or subsystem concepts by inspection, analysis, test, and demonstration to assure that the system architecture and design concepts satisfy the intent of the customer requirements.
Collects data and reports the progress and status of integration and checkout activities, and receives and evaluates results of activities, so that integration activities can proceed. Assists in coordinating resolution of disapproved integration and checkout results by documenting and reporting reasons for disapproval to resolve anomalies.
Validates system-of-systems interfaces or system interfaces or subsystem interfaces by inspection, analysis, test, and demonstration to assure that the system architecture, design and implementation satisfies the intent of the customer requirements. May also assist, with direct supervision, in overall validation of the above.
Validates system-of-systems requirements or system requirements or subsystem requirements by inspection, analysis, test, and demonstration to assure that the system architecture, design and implementation satisfies the intent of the customer requirements. May also assist, with direct supervision, in overall validation of the above.

REQUIRED EXPERIENCE:
Experience working with a team of systems engineers or systems integrators
Experience in software or systems testing

ADDITIONAL EXPERIENCE: REQUIREMENTS:
Systems Engineering experience
o Model Based Systems Engineering
Agile Development experience
Leadership experience

EDUCATION:
Accredited Bachelor's and 10 or more years' experience or a Master's degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 169000
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 02/23/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Systems Engineer 3-C

Description:
Chipton Ross is seeking a Systems Engineer for a contract position in El Segundo, CA.

RESPONSIBILITIES:
As an Early Career DSP Subsystems/Algorithms Engineer (Level 3), you will design and develop state-of-the-art, space based
communication systems for commercial, civil and/or national security programs. You will be part of a highly motivated
team that works with domestic or international customers on their latest satellite systems.
Subsystems or Algorithm duties include:
Designing and developing next generation RF and digital satellite communication systems
Developing and verifying multi-rate, fixed-point signal processing algorithms
Conducting performance analysis of signal processing models
Performing waveform development and characterization
Performing trade studies
Supporting integration ant test of our payloads and spacecraft from unit level through in-orbit operations
Supporting HDL-level design and verification
Performing detailed system design and verification activities


Project assignments typically span the unit life cycle, from internal trades, concept studies and system definition, to
satellite unit development and test. Candidates will belong to a systems engineering team interacting with customers,
suppliers, program management, integration and test engineers, and senior technologists.

Other Job Related Information/Qualifications:
Qualified candidates must have demonstrable experience in one or more of the following: digital communication theory
and systems, digital signal processing (DSP), algorithm design and implementation, or systems engineering principles.
Basic Skills:
- 1+ years of experience with Matlab and/or Simulink.
- 3+ years of experience in digital signal processing or digital communications
- 3+ years of experience in systems engineering concepts (requirements definition, allocation, verification, architecture
design and trade design).

REQUIREMENTS:
- Proficiency in Matlab/Simulink.
- Experience working with ASICs or FPGAs
- Experience with performance characteristics of analog electronics or data converters (ADCs / DACs)
- Experience with digital/RF lab equipment (oscilloscope, signal generator, spectrum analyzer)

EDUCATION:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
First Shift - 8-5PM, 5/40

TRAVEL:
10%

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 167895
Job Location: El Segundo, CA
Rate: $DOE
Duration: 12 Months
Input Date: 03/14/2018
Last Updated: 08/19/2018
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TECHNICAL WRITER / PUBLICATION / CONTENT DISTRIBUTION

Description:
JSG is seeking a Technical Publications & Content Distribution for a 15+ months contract opportunity in Shelton, CT!

Description:

The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Organization level (O Level) Publications Avionics Analyst to support the development and sustainment of the Company CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) – Tech Pubs Lead. The technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and Testing/Troubleshooting procedures inclusive of system diagnostics.

Tech Pubs Role/Support activities include:

Support the CMHP IPT to accomplish all contracted efforts within program cost, technical, and schedule objectives.
Research technical information, interpret technical data, and ensure error free incorporation of data consistent with related subject matter. Coordinate with key suppliers on the Integrated Mission System (IMS) technical manual coverage.
Knowledge of authoring and graphics specifications.
S1000D authoring specification technical experience a must.
Authoring tasks in an Extensive Markup Language (xml) authoring environment and develop Electronic Rapid Action (ERAC) changes as required.
Perform acceptance reviews of assigned technical manuals as required by the Statement of Work, including supplier acceptance inspections and evaluation of source data incorporation.
Perform final reviews of technical manuals to support delivery requirements.
Conduct hands-on validations as required.
Coordinate Maintenance Planning task analysis technical data into the content management authoring system.
Act as a liaison between In-Service Support (ISS), and Acquisition Engineers, Suppliers, CMHP cross IPT members, IETM/SAMS IT, and DND customer.
Investigate/reply to customer comments and also coordinate supplier incorporation of comments as applicable.
Coordinate engineering reviews to ensure turnaround times consistent with product delivery requirements.
Support In-Process Reviews as required by the Statement of Work (SOW) or as requested by the CMHP IPT Lead.
Project Management / Quality Tracking:
Ensure schedule is maintained and final delivery is made in accordance with the CMHP Integrated Master Schedule (IMS).
Ensure project status is maintained and reported. Experience using Earned Value Management System (EVMS) as it relates to deliverable activities within the IMS is a plus.
Possess a thorough knowledge of the terms and conditions of work conducted at the outsource supplier sites.
Perform quality evaluations on supplier projects to track and reduce defect rates.
Maintain and retain quality forms in accordance with Supportability & Training (S&T) standard work.
Customer and upper management status presentations may be required.
AS in a technical concentration or equivalent technical experience is required. BS in a technical/engineering concentration desired.
A&P license is highly desired.
Minimum 7 to 10 years of experience authoring technical publication projects using military specification requirements. Military rotary wing aircraft maintenance certification is highly desired. Experience with S1000D authoring specification a must.
Highly motivated self-starter; able to think and operate independently. Candidate must have the ability to manage multiple activities of varied size and scope.
Strong customer focus and a high degree of attention to detail. Strong communications skills (both written and verbal). Strong organizational skills.
The candidate should be results oriented and flexible to work within a dynamic team environment.
Possess a working knowledge of Achieving Competitive Excellence (ACE) toolset, especially Relentless Root Cause Analysis (RRCA)
 
Job Number: 365248
Job Location: Shelton, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 05/21/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Technical Data Designer 2

Description:
PDS Tech Inc is seeking a Technical Data Designer for an open position Hazelwood, MO 

Develops multiple publication elements for all levels of maintenance for a fielded equipment minor system or multiple sub systems. Collects, researches and analyzes source data and validates source data based on predefined and developed assumptions. Estimates the impact of the proposal or changes to the publication elements.

Technical writing. 

Familiar with Mil-Std guidance and logic.
Experience with F/A-18 Structures.

Experience with aircraft technical manuals and/or Interactive Electronic Technical Manuals (IETMS).

Ability to read and interpret blueprints for aircraft structure for maintenance design and illustration. 

Candidate must be highly organized and detail oriented. 

Aircraft and support systems background highly desired.

The F/A-18 Technical Publications Team seeks a Technical Data Designer with relevant F/A-18 structures experience. The successful candidate will be required to research, develop, produce, and sustain F/A-18 Technical Publications products. Data formats could include both paper and electronic forms of media used during product operation and maintenance (e.g., operational information and checklists, maintenance information, structures blueprints, field modification instructions, configuration specifications, etc.)
 
Job Number: 1810081939
Job Location: Hazelwood, MO
Duration: 9 months
Input Date: 04/30/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxxNAAQ&URLSource=cjhunter

Technical Data Designer 2 - 373107

Description:
**Ability to obtain secret clearance required**

The F-15 Technical Publications Team seeks a Technical Data Designer with relevant F-15 Avionics, Flight, Structural, Hydro-Mechanical, or other maintenance experience. The successful candidate will be required to research, develop, produce and sustain F-15 Technical Publications products under general supervision. Data formats could include both paper and electronic forms of media used during product operation and maintenance (e.g., operational information and checklists, maintenance information, wiring diagrams and flow schematics, field modification instructions, configuration specifications, etc.). Candidates must possess general working level knowledge of F-15 or equivalent platform multiple systems or subsystems and components including the requirements, operating principles, design variables, performance, and key interfaces.
Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: 373107
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/31/2018
Last Updated: 08/18/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Technical Data Designer 2 - Electronics

Description:
Develops multiple publication elements for all levels of maintenance for a fielded equipment minor system or multiple sub systems. Collects, researches and analyzes source data and validates source data based on predefined and developed assumptions. Estimates the impact of the proposal or changes to the publication elements.
Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.
 
Job Number: 373171
Job Location: Hazelwood, MO
Rate: TBD
Duration: 9 - months
Start Date: ASAP
Input Date: 05/02/2018
Last Updated: 08/18/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Technical Data Designer 2 - Secret

Description:
PDS Tech Inc is seeking a Technical Data Designer for an open position Hazelwood, MO  Email Resumes: mmccarthy@pdstech.com

The F-15 Technical Publications Team seeks a Technical Data Designer with relevant F-15 Avionics, Flight, Structural, Hydro-Mechanical, or other maintenance experience. The successful candidate will be required to research, develop, produce and sustain F-15 Technical Publications products under general supervision. Data formats could include both paper and electronic forms of media used during product operation and maintenance (e.g., operational information and checklists, maintenance information, wiring diagrams and flow schematics, field modification instructions, configuration specifications, etc.). Candidates must possess general working level knowledge of F-15 or equivalent platform multiple systems or subsystems and components including the requirements, operating principles, design variables, performance, and key interfaces.
Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience
 
Job Number: 1810080760
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 01/26/2018
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002ditVAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer - Electronic/Electrical Design III - (MO) (UG NX8)

Description:
Confidential Secret, NOT REQUIRED to start

Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

The successful candidate will be responsible for electronic/electrical component packaging, fixture/test station design. This will include the electronic/electrical/mechanical design process from detailed parts to complex mechanical assemblies, by selecting components, preparing design layouts, modifying existing designs and resolving complex design discrepancies to satisfy both customers and producibility requirements. This person will work closely with electrical engineering groups throughout all design phases and the fabrication teams during the build process.

o 10 + years of experience in mechanical design, including mechanisms, structures and/or electronic packaging.
o Working knowledge of 3-D solid modeling
o Experience creating drawings using Computer Aided Draft systems, specifically Unigraphics NX8
o The Person selected shall meet the International Traffic in Arms Regulation (ITAR) requirements to work on government contracts

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: UGEETechDesMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer - Wiring Installation Design III & IV - (PA)

Description:
Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under minimal direction. Additionally: Candidates selected for this position will design, develop, maintain and release electronic / electrical / mechanical drawings and 3D MBD Model based definition data packages using CATIA V5. Duties include developing aircraft helicopter cockpit layouts, designing various instrument and switch panel assemblies, electronic boxes, avionics racks and shelves and all other aircraft type electrical and avionics aircraft installations. Responsible for investigating design precedents to document and maintain configuration control of engineering designs for use by downstream organizations, and developing aircraft electrical equipment configurations for multiple customers while applying company, industry, and governmental standards. Job requires strong technical skillset in CATIA V5 and 3D model based master definition engineering, as well as experience in creating and revising 2D engineering for details, assemblies, and installations for electrical equipment for aircraft applications. Experience with Teamcenter PDM is preferred. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EEDesignPA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 03/13/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer I

Description:
Tech Designer I

Location: Savannah, GA
Pay Rate: $26/hr - $29.13/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Associate degree in electrical engineering preferred.
-Experience with aircraft system wiring diagrams preferred.
-Experience with Mentor Graphics CHS or AutoCAD preferred.

Education and Experience Requirements:
-Associates degree in drafting, design, engineering, manufacturing technology, or equivalent combination of education/experience sufficient to successfully perform the essential job functions.
-Two (2) years related experience.
-Familiarity with computer-aided design systems and basic personal computing. Basic knowledge of engineering, engineering procedures and design drawing standards.

Position Purpose:
Under direct supervision, performs a variety of basic engineering tasks in a specialized area, receiving instruction as to the tasks required and the expected results. Prepares and maintains electronic datasets for engineering drawings with the assistance and direction of more experienced engineering personnel.

Principal Duties and Responsibilities/Essential Functions:
1. Applies knowledge of common design and drafting principles, guidelines, specifications and standards to create basic electronic layouts, sketches, models, and drawings.
2. Obtains form, fit and functional data and verification from engineers or senior designers.
3. Coordinates drawing requirements and release with engineers and senior engineers.
4. Reconciles and integrates the input of engineers.
5. Develops and recommends alternatives to simplify and clarify design intent.
6. Incorporates information from sketches, notes, layouts and markups to produce graphic representations of designs using computer-aided design tools (Mentor Graphics, Oracle, Cadam, Catia, etc.).
7. Reviews work for accuracy and completeness prior to drawing check.
8. Follows established procedures to produce and revise electronic datasets.

Additional Functions:
1. Takes on special projects as assigned.
2. Performs other duties as assigned.

Other Requirements:
1. Good analytical, interpersonal, communication and visualization skills.
2. Ability to work both independently and in a team environment.
 
Job Number: 8815
Job Location: Savannah, GA
Rate: 26-29
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor and Writer 3 with Ability to obtain Secret CA

Description:
1641
Technical Editor and Writer 3 (Job Number: 18004727)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Apr 23, 2018

Target End Date: Dec 28, 2018

Pay Rate: $44/hr

Work Schedule: 9/80

Duration of Assignment: 1 year or longer

Clearance: Ability to obtain Secret


As a level 3 Flight Manual Editor and Writer, be responsible to write, rewrite and/or edit documents such as operational procedure manuals, user manuals, programming manuals, operational specifications, performance appendices, and related technical publications to communicate clearly and effectively, operational specifications and instructions to aircrew audiences to include military personnel. This position will require the initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals. This position will also require the active participation in overseeing the preparation of illustrative materials, to include the selection of drawings, sketches, diagrams and charts. Furthermore, this position requires the responsibility to conduct detailed quality reviews and to work closely with customers and engineers for issue resolution.


Basic Qualifications:

6 Years with Bachelors, 4 Years with Masters, or equivalent experience. Previous Flight Manual authoring and development experience. Familiar with pilot and/or mission operator controls, displays, and general knowledge of aircraft systems. Previous experience developing Interactive Electronic Technical Manuals (IETMs). Strong attention to detail and personal organization. Be a pro-active team player who thinks ahead, plans and suggests solutions. Must be able to attain a Secret clearance.

Preferred Qualifications:

Previous Flight Manual authoring and development experience. Military and/or Pilot experience preferred in unmanned or manned aircraft. Familiar with pilot and sensor operator controls, displays, and general knowledge of all aircraft systems. Ability to support airworthiness military type certification. General understanding of S1000D, SGML or XML authoring software, common source database, and technical publications development processes. Ability to interpret engineering documentation including drawings, specifications, alert bulletins and other technical documents. Possess excellent oral and written communications skills. Must be able to perform work with little or minimal supervision. High literacy in structured authoring environment (bookplan structure, task numbering and DTDs/schema, elements, tagging and attributes). Experience producing electronic technical data.
 
Job Number: MB-1641
Job Location: San Diego, CA
Rate: 44/hr max
Per Diem: no
Duration: 1 year or longer
Start Date: 9/80
Input Date: 06/12/2018
Last Updated: 06/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor/Writer

Description:
Technical Editor/Writer

Location: Grand Prairie, TX


Description:
This individual will be handling the technical writing and creating of training information, as well as delivering and training the material. The manager needs someone with a solid training background as well. Someone with a military background would work great for this role, but that is not mandatory. Technical Publications Writer Technical Writer that provides a wide array of technical documentation written to Military Specifications. Primary responsibilities include developing and validating Interactive Electronic Technical Manuals (IETMs), Depot Maintenance Work Requirements (DMWRs), Repair Parts and Special Tools Lists (RPSTLs), procedural art and illustrated graphics all developed to applicable Military Specifications. Candidate must possess excellent written and oral communication skills and be able to work well in a team environment. Must be flexible with outstanding work ethic and possess the ability to respond quickly to company and client needs. Must be able to interface with Subject Matter Experts (SMEs) to verify and understand technical concepts and develop courses of action to ensure project completion is on time and within budget. Candidate must be familiar with layout, design and structure of Organizational, Intermediate and Depot Level Technical Manuals (TM’s)' including Operation and Maintenance, Theory of Operation, Fault Isolation Procedures, and Illustrated Parts Breakdowns (IPB’s). Must be able to read and interpret engineering drawings and software description documents.

Skill/Experience/Education
Mandatory:
Candidate must possess strong interpersonal skills Demonstrated written and oral communication skills Abilities to read and interpret Engineering drawings, schematics Strong teaming skills. Be flexible with an outstanding work ethic and possess the ability to respond quickly to internal and external customer requirements. Must have 2-3 years of professional experience

Must have experience/working knowledge of the following:
- Extensible Markup Language (XML)
- Extensible Stylesheet Language Transformation (XSLT)
- MIL-STD-40051-1 and MIL-STD-40051-2 preferably Revision B
- MIL-STD-2361C or later release
- Arbor text Editor including Styler (5.4 or higher)
- Ultra Edit or similar
- Adobe Acrobat Pro
- Content Management Systems such as Windchill Proficient with Microsoft office (Word, Excel, Project, PowerPoint) Must be familiar with layout, design and structure of Organizational, Intermediate and Depot Level Technical Manuals (TM’s)' including Operation and Maintenance, Theory of Operation, Fault Isolation Procedures, and Illustrated Parts Breakdowns (IPB’s). Ability to produce illustrations using graphics tools such as ISO draw, Autrotrol or similar graphics tools Ability to acquire and verify content and illustrations by coordinating across Engineering Disciplines, observing production methods, referring to engineering drawings, notes, manuals, and similar publications. Ability to write using clear and concise language that adheres to customer-established standards and conventions. Ability to write technical content for maintenance technical manuals including installation, test, repair, and troubleshooting procedures. Solid training background required.

Desired:
Military background helpful but not mandatory. Experience with Electronics, Hydraulics and Mechanical Systems Experience with Multiple Launch Rocket System (MLRS)/ High Mobility Artillery Rocket System (HIMARS)Past experience working with US Army or other Military Publications Interactive Authoring and Display System (IADS) 4.0 or later Electronic Maintenance System (EMS) Next Generation (NG) bachelor’s or Master’s Degree in Information Technology, Electrical Engineering, Mechanical Engineering or Industrial Engineering
 
Job Number: 18-08134
Job Location: Grand Prairie, TX
Start Date: June 4, 2018
Input Date: 05/11/2018
Last Updated: 05/15/2018
Firm Name: ICONMA LLC
Attention: Robin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com