Job Search Results

190 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/12/16 Saturday 01:04AM Pacific Time by ContractJobHunter. )

Listings 1 - 190

Go To My Job Tracker

Expand all descriptions

1st shift Material Handler/Paint Line Loader

Description:
PDS Tech, Inc. is seeking a 1st shift Material Handler/Paint Line Loader for an open position in Wichita, KS.
******will not be just moving material with forklift and loading line. Majority of time will be paint prep - blowing debris off parts and masking/cleaning off prior to painting in the oven. 
As the Material Handler/Line Loader – 1st Shift you will manipulate (manually and mechanically), purchased and fabricated parts, weldments, and sub-assemblies to route and process through the manufacturing plant’s paint department equipment to achieve quality painted parts. 

Responsibilities include: 
• Material handling of detail and assembled parts. Perform tasks as required to move parts, attach and remove parts to/from conveyor components as instructed, and attach adhesive parts together. 
• Match parts - to part numbers, keep counts and identification correctly as required. Handling parts per general procedures and to specified quality requirements. 
• Make adjustments or improvements to components including; cleaning, identifying, spot painting as required, and positioning for delivery. 
• Complete tasks by following work instructions, process sheets, check sheets, photos, and carrying out assignments given by Supervisor in an efficient manner 
• Perform minor painting rework as required to detail parts and components to permit proper assembly 
• Responsible for helping to maintain good housekeeping practices in accordance with company requirements 
• Operate fork lift truck for various duties 
• Perform all tasks within safety guidelines. 
• Perform other duties as assigned by lead person or department team leader 
 
Requirements: 
• High School Diploma or GED 
• 2+ years of experience working in material handling, logistics, and/or warehouse operations. 
• Ability to perform each essential duty including operation of fork lift truck 
• Must be able to legally operate a motor vehicle 
• Ability to read, write, and comprehend simple instructions, short correspondence, and memos 
• Must have the ability to meet the physical requirements of the job including; Overhead work - lift and take down parts that are a minimum of 67? high from the floor. Lift a weight of 50      pounds. 

Preferred: 
• Basic computer knowledge is recommended 
• Experience working within a manufacturing or industrial environment 
• Must be able to effectively prioritize work tasks and requirements 
• Must be a team player and also be self-motivated 
 
Job Number: 1710077673
Job Location: Wichita, KS
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023QunAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2283 - SUPPLIER READINESS ANALYST - cv. word doc only

Description:
Assess the suppliers for the preparation of each ramp-up and highlight the logistical and operational risks, make recommendations for their mitigation and follow up actions to ensure on-time deliveries.

Manage the capacity analysis for the suppliers, the performance of the supply chain management, the efficiency of the operational manufacturing and logistics.

Identify bottlenecks and develop action plans for their resolution. (VSM, MIFA, inventory plan, transportation plan, etc.).

Engage suppliers in the continuous improvement of the supply chain management, transport planning, inventory planning and other operational concepts.

Bachelor or a technical degree in Operations Management or Industrial Engineering.

Have a minimum of 5 years of relevant experience in the manufacturing industry.

Advanced knowledge of Lean management principles (problem resolution, Six Sigma, etc.)

General experience in the supply chain environment.

Have a good knowledge of MS Project and MS Office environment.

Are perfectly bilingual (English and French) both written and oral.

Are mobile: Travel to supplier%u2019s sites occupy 30% to 40% of working time.

Have good leadership, team spirit, an orientation oriented toward action and results.

Have the skills to analyze products and processes to establish new best practices.

Have a vast knowledge of manufacturing operations, including quality management, facilities maintenance, project financial management, supplier management, production operation, logistics planning control and continuous improvement.

Have knowledge in supplier management, transportation planning, inventory planning and other operational concepts.
 
Job Number: 2283
Job Location: Mirabel, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

Aircraft Painter (35) - OR

Description:
Chipton-Ross is seeking 35 Marine Painters for openings in Portland, OR.

RESPONSIBILITIES:
Looking for Marine painters with experience working on Aircraft or Large Boats.

REQUIRED EXPERIENCE:
- 2-3 years experience
- Electrostatic Spray Gun
- High Pressure Spray Gun
- Mini Jet Spray Gun
- Marine, Auto body or Industrial Painters preferably with HVLP (High Volume Low Pressure) air-fed electro-static paint sprayers.
- At least 2+ years of Industrial and/or Commercial marine/transportation painting experience is highly desired.


ADDITIONAL EXPERIENCE:
Refurbishing experience a big plus.

EDUCATION:
High School Diploma

VARIABLE SHIFT
Shifts are 4- 12 hour shifts.
4 days on, 4 days off

ADDITIONAL:

May pay as low as $15 for an entry level position and if candidate doesn't test as well as expected.
Position may be temp to perm or direct placement, depending on client's needs a candidate's testing.
Client will expect testing for all candidates that they are interested in and show that they have an interest in committing to this opportunity. Client will coordinate and pay for round trip flight to Portland and also give one day of per diem. Skills tests are on Wed, Thurs, Fri. If skills test is passed, client will determine if candidate is Jr. or Sr, and make an offer based on results of testing.

May go up to $22/hour for 2-3 yrs expereince with a STRONG skilll set. Client hopes to move those hired to a Senior Painting position within 3 months, and Senior positions there pay $25.

Shifts are 4- 12 hour shifts. 4 days on, 4 days off with a 10-15% shift differential available.


 
Job Number: 162173
Job Location: Portland, OR
Rate: $22 to $25.00 DOE
Duration: PERM
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Leila Morrow
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmorrow@chiptonross.com
Website: www.chiptonross.com

Assembler Level 3

Description:
PDS Tech is seeking a candidate for Assembler- Level 3 in Torrance CA.

Assembles fabricated parts at floor stations.
Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
Uses hand tools and power tools to assemble units according to product specifications.
Identifies units that fail tests or tolerance levels and repairs as necessary.
Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
Requires a high school diploma or its equivalent.
May be required to complete an apprenticeship and/or formal training in area of specialty.
May require 4-6 years of experience in the field or in a related area.
 
Job Number: 1710066126
Job Location: Torrance, CA
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021bd5AAA&URLSource=cjhunter

Assembler Level 3

Description:
PDS Tech is seeking a candidate for Assembler- Level 3 in Torrance CA.

Assembles fabricated parts at floor stations.
Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
Uses hand tools and power tools to assemble units according to product specifications.
Identifies units that fail tests or tolerance levels and repairs as necessary.
Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
Requires a high school diploma or its equivalent.
May be required to complete an apprenticeship and/or formal training in area of specialty.
May require 4-6 years of experience in the field or in a related area.
 
Job Number: 1710066129
Job Location: Torrance, CA
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021bdPAAQ&URLSource=cjhunter

Assembly Mechanic - Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Assembly Mechanic - Level 1 position located in Memphis, TN.

In your role, you will:

  • Constructs, maintains, and tests mechanical equipment, machinery, and components.
  • Identifies parts for replacement and machines that need new parts and places orders as necessary.


Special Considerations:

  • Lifting is generally at or below 30Lbs. without significant repetitions.
  • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
  • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 

  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 0-2 years of experience in the field or in a related area.
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision. 

 
Job Number: 1710067388
Job Location: Memphis, TN
Duration: 7 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012QiKAAU&URLSource=cjhunter

Buyer/Planner

Description:
PDS Tech is seeking a Materials Planner in Boilingbrook, IL.
Key Responsibilities:
• Will be working with Suppliers 

• Processing POs and following up on them 

• Having Excel experience is KEY for this position 

• Using AS400, having is a plus, but will be taught 

• Working in a Light Industrial Warehouse/distribution environment, so having this is very helpful for this role 

• Managing Supplier delivery 

• Supporting Factory On-Time-Delivery 

• A plus to have Lean Manufacturing or Lean Supply Chain 

• Handling invoicing discrepancies with Suppliers 

• Scheduling production, looking at system (CMS-AS400) and what net requirements are. and creating Work Orders 

 
Job Number: 1710065392
Job Location: Bolingbrook, IL
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021X63AAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CHINA - Aero Engine - Chief Design

Description:
Leading Chinese civil aerospace engine development organisation are seeking a high-level Chief Design Engineers to provide consultancy support in Low Emission Combustion & engine compression systems for a new major aero engine development program. (in support of the COMAC C919 / widebody programs)

Design Chief - Low Emission Combustion>>>

Responsibilities:

To formulate the technology development of civil aircraft engine turbine.

To organize the construction of related design system and Test & Verification platform of civil aircraft engine turbine.

To organize the research of civil aircraft engine turbine.

To scheme and conduct the technological cooperation with domestic and foreign research organization in civil aircraft engine turbine.

To organize the application of key technology research and pre-research project.

To provide technological consultation in developing civil aircraft engine turbine.

To train, guide and improve the skills of working team.

Requirements:

15+ years working experience in civil aircraft engine turbine field.

Solid knowledge in turbine aerodynamic, cooling, mechanical and structure theory.

Familiar with key technology of civil aircraft engine turbine..

Priority will be given to those who have the experience of civil aircraft engine turbine design and test.

Priority will be given to those who have the experience of project management and team management or extraordinary achievement.

Design Chief in civil aircraft engine's compression system >>>

Responsibilities:

To formulate the technology development of civil aircraft engine's compression design system, including fan, booster and high pressure compressor.

To organize the construction of related design system and Test&Verification platform of civil aircraft engine's compression system.

To organize the research of design in civil aircraft engine's compression system.

To scheme and conduct the technological cooperation with domestic and foreign research organization of design in civil aircraft engine's compression system.

To organize the application of key technology research and pre-research project.

To provide technological consultation in designing in civil aircraft engine's compression system.

To train, guide and improve the skills of working team.

Requirements:

15+ years working experience in civil aircraft engine's compression system design field

Solid knowledge in compression system design theory.

Familiar with key technology of design in civil aircraft engine's compression system.

Priority will be given to those who have the experience of design and test in civil aircraft engine's compression system.

Priority will be given to those who havethe experience of project management and team management or extraordinary achievement.

Terms>>>

Depending on the individual, the role can be taken up as a full-time / long-term (2-5years) direct hire with the client or part-time (limited hours e.g. 1000 / yr), with a mixture of working in China and regular home breaks. Some remote working can be also possible. Remuneration will be either hourly rate of monthly salary for longterm.
 
Job Number: JO0000000008
Job Location: China
Rate: Various
Duration: Various options
Start Date: Flexible
Input Date: 11/06/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

CNC Machinist - 4/5 Axis Mill - 3rd shift

Description:

PDS TECH INC is currently looking for a CNC Machinist - 4/5 Mil - 3rd shift for our client in Torrance.

Must be able to set up and operate manual and CNC Mills. Capable of holding tight tolerances associated with the machining of precision parts. Must be able to read blueprints and interrupt written work instructions. Prior experience 4 and 5 multi-axis Mills

Employee will work in a machine cell where he/she will be responsible for the operation of 1 or more machnies at a time, depending on production needs. Employee must be comfortable multi-tasking in a fast paced environment.

Candidate must possess 3 years of Machinist experience (NOT SIMPLY MACHINE OPERATION). Must be comfortable setting-up and troubleshooting mechanical issues with CNC Machines. Must also be comfortable using various measuring equipment such as Micrometers, Calipers, and Dial Bore Gauges. 
**Gear and/or grind experience a plus**

High School diploma or GED required. 
Machining trade a plus.
Required skills:-Experience in aerospace systems and/or high performance control systems preferred
-A Minimum of 3 years of manufacturing engineering experience – preferably with at least 1 year managing projects.
-Training and Experience in LEAN
Scope:Primary responsibilities will be on developing and creating operations flow documentation, performing prove-out processes, assisting in driving quality processes internally and from suppliers, and performing standard work in manufacturing engineering. You will also support project-oriented work such as investigating new capital expenditures for equipment, developing new or improved processes for parts, in-sourcing or out-sourcing activities, and continuous improvement projects.
Education:-Bachelor of Science or Masters of Science Degree in a Technical Field – preferably Mechanical, Manufacturing, or Industrial Engineering.

 
Job Number: 1710072085
Job Location: Torrance, CA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239vYAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer

Description:
Experience Requirements
Experienced Civil Engineer with Environmental Engineering focus.
Proficient knowledge of Autodesk Civil3D, AutoCAD, and Microsoft Office products. Proficient knowledge of drafting standards, including plan and detail production.
Moderate to proficient knowledge of environmental permitting, hydraulic & hydrologic analysis & modeling, StormCAD, SewerCAD, WaterCAD and ICPR software; knowledge of Bluebeam or other pdf software.
Must be a detail-oriented team player who has the ability to work independent with strong organizational skills and able to work with others in a fast-paced production environment.
5-10 years of experience is required
 
Job Location: Buena Vista, FL
Input Date: 11/01/2017
Firm Name: NESC STAFFING
Attention: Christina Ellis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Civil/Industrial Openings

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Conceptual Design Engineer

Description:
Key Responsibilities
  • Must be able to work under limited supervision
  • Create and prepare detail design documentation
  • Generate conceptual product designs
  • Resolve product design problems in conjunction with technical customer representatives and assist in implementation of    resolutions
  • Prepare, and present conceptual and detail product design reviews
  • Directs the preparation of accurate and complete manufacturing drawings
  • Assists in establishing and maintaining valid structural design methodology for component design
  • Interfaces daily with various departments at various technical and management levels.  Provides timely and quality service  to both internal and external customers
  • Provide technical assistance to lower level design engineers and technical direction to the design drafting function

 
Qualifications / Experience

  • Requires a 4-year degree in mechanical/civil/aerospace engineering, or equivalent.
  • Must possess 5 years aerospace component design experience in a manufacturing environment.
  • Must have excellent working skills in the use of Mechanical Computer Aided Design (CAD).
  • Requires knowledge of drafting standards and must be skilled in the preparation of good design engineering documentation.
  • US citizenship required due to U.S. Government/military information access requirements. Applicants selected will be subject to a government security investigation and must meet eligibility requirements. Individuals may also be subject to a background investigation to include but not limited to: criminal history, employment and education verification, drug testing, and credit worthiness. This clearance must be maintained during employment.

 
 
Skills

  • Must be able to demonstrate an ability to independently do work of a creative nature
  • Capable of taking a strategic view
  • Must possess excellent interpersonal, leadership, organizational, negotiation and communication skills
  • Must display a high level of maturity and sound judgment
  • Identifies opportunities to drive business forward
  • Ability to work on multiple tasks, prioritizing as required
  • Capable of interfacing professionally with customers and suppliers at all levels
  • Design using Unigraphics, preferably NX7.5, or Catia V5

 
Desirable

  • Experience in design using advanced materials, and fabrication technologies


 
Job Number: 1710073454
Job Location: Santa Ana, CA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023GV9AAM&URLSource=cjhunter

Control Laws Engineer - Flight Dynamics Group

Description:
This position is located in Nagoya, Japan. However, the job may involve international travel. Deployment for extended periods to USA to support Flight Tests may be necessary.

PDS Tech is seeking a Control Laws Engineer for the Flight Dynamics Group, Regional Jet Development Project.

The professional will work as part of the Control Laws team and the main scope of the work is to provide specialized technical assistance to the team regarding Control Laws Design, Verification and Certification.



This will include Control Law design and analysis tasks, support to piloted simulation/evaluation and flight testing, including data analysis/synthesis and problem reporting/resolution. Validation and verification activities may form a significant part of the assigned tasks, including desktop, rig and aircraft level analysis and testing with production of appropriate documentation to support Certification.



Use and development of simulation models, tools and environments will be a regular feature of the work.



If requested, the specialist will also work on other activities related to Control Laws, such as Failure Analysis, Flight Control System integration, ASE and interfacing to other teams.

Basic work scope is to provide technical assistance to the development and certification of the Regional Jet Program, focusing primarily on Control Laws Design, evaluation, verification and optimization.



  1. This activity includes:
    1. Control Law design, including gain tuning, stability and handling qualities analysis.
    2. Planning, preparing, executing, analysing and documenting Desktop Simulations
    3. Planning, preparing, supporting, analysing and documenting Manned simulations
    4. Planning, preparing supporting, analysing and documenting Flight Test activities
    5. Support to problem report resolution, including interaction with the pilot community.
    6. Validation and Verification work and associated documentation
    7. Support to tools, methods and analysis environment development
    8. Analysis of identified Failure cases and support to associated HQRM analysis and test activities
    9. Support to integration activities with other areas of organization including Flight Control Systems, Aeroelastics, Loads
    10. Preparation of documentation to support Certification and, if requested, coordination with authorities (JCAB, EASA, FAA)


  • 5+ years of Aerospace Industry experience.
  • At least 3 years of Control Laws experience with OEM, preferably on a Civil Aircraft project
  • Good knowledge of Flight Dynamics and computer simulation/modelling required
  • Recent experience of piloted assessment of Control Laws including planning, preparing and analysing simulator, rig and Flight test results.
  • Experience of direct support to Flight testing including TM work is advantageous
  • Knowledge of Part 25 rules and guidance material for Certification
  • Knowledge/Experience on analysis of failure cases is advantageous
  • Experience in design, qualification and certification of civil aircraft equipped with FbW is advantageous
  • Ability to use and/or develop analysis tools to support Control Laws Design and Verification tasks
  • Knowledge of Flight Control Systems design, ASE and/or Loads analysis is advantageous
  • Good MATLAB/Simulink skills and experience essential
  • Good programming skills, including in ‘C’ are highly advantageous
  • Good team working and interpersonal skills
  • Good English language skills
  • Japanese language skills are advantageous

 
Job Number: 1710076136
Job Location: Nagoya,
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MnjAAE&URLSource=cjhunter

Crew Station Design

Description:
PDS Tech is seeking a Crew Station Design for an open position in Shelton, CT.

Responsibilities to Include:Develop and design menus, logic and display graphics in a multifunction glass cockpit Pilot Vehicle Interface (PVI) or coordinate design activities of suppliers. Assume responsibility for PVI designs and coordinate with people of various disciplines in an Integrated Product Team environment that requires flexibility and diplomacy. Coordinate evaluation of designs in simulation, take ownership of design approval, and produce configuration-managed specification documents for software requirements developers. Support hot bench, ground, and flight testing of finished product. Secondary duties may include design and development of air vehicle Crew Station Geometry and layout of controls and displays to accommodate full anthropometric range of expected users. Evaluate Crew Station Design and layout in physical and/or electronic mockups, simulations and air vehicles
 
Required:
- MS/MA in Human Factors, Experimental Psychology, or related degree
- (BS Industrial Design, Industrial Engineering or equivalent with Human Factors coursework will be considered)
- Experience with Part Mission or Full Mission simulation of Pilot Vehicle Interface designs
- Rapid Prototyping tools such as VAPS® or equivalent
- Basic Office and database management software (word processing, Power Point, Excel, drawing tools, etc)
- Excellent communication, writing and presentation skills
 
Desirable:
- Experience in military aviation (helicopters in particular).
- Rational ClearCase, or equivalent configuration management tool.
- Experience with Human Modeling tools such as Jack® or equivalent.
- Experience with 3D modeling tools such as CATIA®, ProEngineer® or equivalent
 
 
Job Number: 1610058626
Job Location: Shelton, CT
Per Diem: No
Duration: 24 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fkh2AAC&URLSource=cjhunter

Customer Service Assistant

Description:
PDS Tech is seeking a Customer Service Assistant for an open position in Nebraska City, NE
Essential Duties and Responsibilities:

Works closely with the District Sales Manager while acting as the main point of contact for customer issues pertaining to products and services. 

 The CAR manages the OTC process by reviewing each Customer PO/contract, validating pricing, working with and assisting with resolving AR issues when appropriate. 

 Review, process and manage Customer complaints/returns within prescribed timescales in the QM module as documented in the RMA guidelines for successful outcome and feedback both internally and externally. 

 Establish and maintain effective and efficient utilization of records and files necessary in providing timely and satisfactory service to Customers. 

 Prepares, generates, and distributes daily reports (as required) and order acknowledgements to appropriate personnel. 

 Understand product specifications and relay them accurately to both internal and external Customers. 

 Understand and retain all processes and procedures of the CAR function. CAR’s are required to take an active role in process development and continuous improvement. 

 Participate in training sessions, meetings, skill building and professional development classes. 

 Contributes to the development and maintenance of standards, policies, and procedures. 

 Responsible for actively ensuring the retention of the organization’s customer base which includes promoting the organizations existing customers. 

 Provides back-up support to other group members in the performance of job duties as required. 

 Supports/participates in the organization’s Continuous Improvement Program. 

 Liaise with Sales, Operations and Materials Management to ensure all activities related to material or product deliveries are communicated for inclusion within the production capacity planning program, and all delivery issues are escalated appropriately. 

 Responsible for the completion of ‘order management’ on all accounts to ensure prompt order processing with high levels of accuracy; including verification of product configuration from customer.

 Monitor and maintain all credit and debits for customer accounts. 

 Act as first point of contact for Customer and vendor inquiries. 

 Prepare documentation for pricing committee for bids and quotes. 

 Maintain and continuously improve upon all work procedures in support of Company and Departmental standards and procedures. 

 Use judgment appropriately to escalate all issues concerning the department or employee concerns. 
Qualifications or Functional Experience: 

A university degree in business studies, marketing or equivalent is preferred; or at least 5 years’ experience in customer service within a manufacturing or industrial setting. 

 Alternatively, the equivalent combination of formal education and experience within a similar office environment will be considered. 

 Practical experience in formulating short and long term business plans concerning internal sales targets. 

 Bilingual ability of both the spoken and written word would be a candidate advantage. 

 A valid driver’s license is essential. 



System or Knowledge: 



This includes: 

 IT/Computer literacy – good knowledge and technical skills in Microsoft applications such as; PowerPoint, Excel, Word, Outlook and Project. 

 Knowledge and technical skills in the use of role related software; such as SAP. 

 One to three years product knowledge. Must possess strong technical aptitude.
 
Job Number: 1710064323
Job Location: NE City, NE
Duration: 9 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GM9WAAW&URLSource=cjhunter

Design Engineer-Secret Clearance

Description:
PDS Tech is seeking a candidate for the Design Engineer - Secret Clearance position located in Clearfield, UT.  
Highly motivated design engineer with experience designing composite structures and assemblies for military and/or commercial aircraft.
Responsibilities include but are not limited to the design of laminates, sandwich structures, and bonded and bolted assemblies.
Skills should include relationally linked modeling, establishing datum schemes for assemblies, and performing tolerance stackup analysis. 
Experience Requirements: 
• MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE 
• **Must have an active clearance with an investigation within the last 4.5 years (or 4 years 6 months)** 
• BS in Engineering with a minimum of 10 years related experience in design engineering function 
• Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design 
• Experience leading a team of engineers 
• Assembly level design including establishment of data schemes and tolerance analysis 
• Knowledge of composite materials and manufacturing processes 
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team 
Experience Preferred: 
• Definition of layups and ply patterns with Fibersim 
• CAD automation, programming, script writing 
• Previous experience in aerospace manufacturing facility 
Skills & Qualifications: 
• Strong interpersonal skills with the ability to work with a team 
• Excellent communication skills are required. 
• Ability to make sound decisions 
• Ability to multi-task 
• Ability to prioritize and manage time effectively 
Education/Certifications: 
• BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: 1710065732
Job Location: Clearfield, UT
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: David Goodman
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021ZQYAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Sr. Designer to support program initiatives. Creates innovative and practical mechanical and electro-mechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.

Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to provide direction to a design team.
 
Job Number: 41026
Job Location: AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 3 mos +
Start Date: ASAP
Input Date: 11/02/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

EH&S Engineer/Specialist 3

Description:
PDS Tech, Inc is seeking a candidate for the EH&S Engineer/Specialist 3 position located in Alpharetta, GA.  
The EHS professional is responsible for managing safety (OSHA compliance) across the facility and its operations as well as the development, implementation and coordination of environmental programs and policies to ensure compliance with all applicable regulations. 

This position has a direct impact on Business Unit performance and must possess an in-depth knowledge of safety and environmental regulations management methods: position must also possess the ability/ skills to communicate with a wide variety of people and influence actions. 

The Senior EHS professional will serve as a resource to other employees at the location and provide tools to management to maintain a high level of environmental compliance performance; and the safety of employees, visitors, and contractors. 

The Senior EHS professional will report directly to the Operations Manager and indirectly to the Division EHS Director. 
Responsibilities 
• Coordinating directly with Division EHS Management 
• Measuring performance of facilities’ compliance within the business to established standards 
• Occupational health management; including injury reduction, trending, etc. 
• Demonstrating operational knowledge of facilities 
• Proactively contribute to continuous improvement efforts 
• Lead cross functional teams related to EHS targets and objectives 
• Facilitate EHS training and communications across the organization 
• Conducting and managing EHS incident investigations, including tracking and record-keeping requirements 
• Staying current with existing and new regulations for state and federal RCRA, OSHA, Clean Water Act, Clean Air Act, Centralized Waste Treatment Standards, etc. 
• Establishing audit guidelines for plant and facility 
• Assessing new or existing environmental regulations and determining applicability to the facility 
• Developing environmental related compliance tools and training programs 
• Tracking environmental related Federal, State, and Local regulatory changes impacting the business, both from a facility and customer relations standpoint: then communicate those findings to management. 
• Interfacing with agencies, employees, and outside legal counsel on behalf of business when required: coordinating business response and/or comments to regulatory changes 
• Participating in audit activities (internal and external) including identification of EHS issues and implementation of corrective actions 
• Assisting Regional Country United States (RC US) Corporate EHS professionals as required 

Required Knowledge/Skills, Education, and Experience 
• BS in Environmental Health and Safety or related field (loss prevention, etc.) highly preferred: in rare cases years of experience and performance history related to EHS may be considered as a substitute for 4 year degree 
• 8+ years of experience in a technical EHS role on Safety and Environmental Compliance within a large equipment manufacturing environment 
• Experience with ISO14001 and ISO18001 
• Experience with industrial manufacturing operations (i.e. overhead crane operation, medium voltage equipment testing, ergonomic assessments, etc.) highly preferred 
• Occupational health experience (injury reduction, trending, etc.) preferred 
• Demonstrated experience working on cross-functional teams and leading EHS targets and objectives 
• Proven ability to facilitate training, including presentation development in PowerPoint
 
Job Number: 1710076046
Job Location: Alpharetta, GA
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023ManAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Supports, performs, and manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
 
Job Number: 39603
Job Location: Stratford, CT
Rate: Goood $$$
Per Diem: possible
Overtime: possible
Duration: 12 mos
Start Date: asap
Input Date: 11/08/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6333
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

Electrical Engineer

Description:
PDS Tech, Inc. is seeking a Electrical Engineer for an open position in Stratford, CT.
  • Supports, performs, and manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes. 


 
Job Number: 1710076984
Job Location: Stratford, CT
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023P3KAAU&URLSource=cjhunter

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer Level 3 - PA - C

Description:
Chipton-Ross is seeking an Electrical Engineer Level 3 for an opening in Archbald, PA.

RESPONSIBILITIES:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

REQUIRED EXPERIENCE:
Electrical circuit design, analysis, and documentation experience

EDUCATION:
High School Diploma

WORK HOURS:
9/80, 1st Shift

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 162928
Job Location: Archbald, PA
Rate: Up to $50.00 DOE
Duration: 11 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer - Machine and Automation Control Software

Description:
While the selected individual may be responsible for performing all aspects of engineering design throughout the project lifecycle, this position will focus mainly on machine control and automation software.  The individual will generally work within a multi-disciplinary project team.
 
Scope of responsibilities will include:
 
Develop or modify machine control and automation software for PLC, HMI, Motion Control/Servo, DCS, and VFD technologies.  Development of machine vision and/or product registration applications may be included for candidates with the correct skill set or desire to learn.
Develop functional descriptions, network riser diagrams, and software testing and validation protocols.
Adhere to project standards for design and documentation.
Self execute or direct small teams to complete projects per scope, schedule, and budget expectations.
Support hardware and/or software designs through lab testing.
Travel to the customer facility for installation, check-out, and start-up as required. 
Report status to the discipline lead or project manager in an accurate and concise manner.
Actively engage in personal and team development/improvement efforts.  
 
The ideal candidate will possess the following:
 
A minimum of 5 years of machine control and automation software experience.  Equivalent hardware design experience is desired.
 
BS or MS in Electrical or Computer Engineering.  Equivalent experience may be considered.
 
Manufacturing experience and design application knowledge of PLC, HMI, DCS, Servo and VFD hardware, including edit-level software capabilities.  Experience with ControlLogix and Wonderware is preferred.  Experience with Reliance Automax or Siemens is desirable.
 
Application-based experience and design/configuration knowledge of industrial communication networks including Ethernet, DeviceNet, ControlNet, and SERCOS.
 
Manufacturing data integration and management, along with SCADA, .NET, SQL, and machine vision application experience.
 
OEM equipment integration experience and electro-mechanical aptitude.  Pneumatics or instrumentation experience is helpful.
 
Proven experience maintaining effective and positive relationships with engineering management, project managers, clients, OEMs, and vendors.
 
Experience in the Pulp/Paper & Tissue, Food & Beverage, or Consumer Products industries.
 
Other Essential Functions:  
While travel requirements vary by project and phase of the project, the ability to travel up to 20-30% of the time on average will be required.
 
 
Job Number: 1710071021
Job Location: Green Bay, WI
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000236XRAAY&URLSource=cjhunter

Electrical Engineer - TX - C

Description:
Chipton Ross is seeking an Electrical Engineer in GRAND PRAIRIE, TX

Start Date: ASAP

Job Description:
Electrical design support will be required to support missile electrical architecture trade studies and concept design. Overall missile electrical design and particular focus for the control actuation system design is required. Candidate may need to work with component suppliers.

The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Mandatory Skills:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 161283
Job Location: Grand Prairie, TX
Rate: Up to $45.00 DOE
Duration: 1 Year
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer - Technical Specialist I

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services.

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
Unique Skills:
Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education and Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 372818
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 12/11/2017
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / no clearance / schematic design experience required CA

Description:
Requirement #AERO-REQ-0707
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/28/2017
End Date 11/28/2018
Number of Resources 1
Security Clearance No Clearance

Title: Electrical Engineer

Description

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating wiring harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents.

Skill/Experience/Education

Mandatory:

Experience creating electrical architectures/schematics and wiring harness design.

Desired:

Experience using wiring harness design tools such as Mentor Graphics Capital Harness or HarnesSyS. Experience performing electrical load analysis and electrical power system integration. Experience with CATIA V5. Experience generating System Checkout Procedures and providing support. Experience incorporating subsystem hardware into a System Integration Lab (SIL) and troubleshooting integration issues. Experience working with manufacturing during build up to troubleshoot systems. SSecret Clearance is desired but not a requirement.

Skill Matrix

Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness.
6-8 Years Yes
Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics.
6-8 Years Yes
Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems.
6-8 Years No
Lab and Vehicle Checkout Test and identify failures for system integration lab and aircraft electrical systems.
4-5 Years No


Interview Required Yes


OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0707
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/30/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineer Level - 3 - SECRET

Description:
PDS Tech, Inc. Is seeking a Electrical Engineer - Level 3 for an open position in Grand Prairie, TX.
MUST HAVE SECRET CLEARANCE
Job Description: 
  • Electrical design support will be required to support missile electrical architecture trade studies and concept design.
  • Overall missile electrical design and particular focus for the control actuation system design is required.
  • Candidate may need to work with component suppliers.
  • The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
  • The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers. 

Mandatory Skills:
  • Researches, develops, designs, and tests electrical components, equipment, systems, and networks.
  • Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
  • Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree.
  • Considered experienced, but still a learner. 



 
 
Job Number: 1610061539
Job Location: Grand Prairie, TX
Per Diem: No
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2zVAAS&URLSource=cjhunter

Electronic Installer 1

Description:
PDS Tech, Inc is seeking a candidate for the Electronic Installer 1 position located in St. Rose, LA. 
  • Assists with routine equipment installation, trial runs and service activity runs to ensure that it meets specifications.
  • Provides assistance with training customers to maintain and adjust routine equipment.
  • Performs routine maintenance on tools, test equipment, etc. and completes required service or systems paperwork.
  • Assists with responding to routine service or systems calls. 
  • Performs or assists with installation and checkout of electric and electronic components for systems and service installed jobs and service agreements associated with automatic building controls systems, fire management, security CCTV, audio and energy management systems. 
  • Installs or assists with the installation of conduit, wire, cable, equipment, components and devices associated with fire, security, and energy management systems.
  • Installs and mounts electric / electronic controls, devices, panels, sensors and components.
  • Performs interlock wiring, wiring check out and assists with system start up. 
  • Coordinates with or advises supervision about requirements for material and supplies to ensure timely delivery to job site. 

Knowledge, Skills, and abilities:
High School diploma or GED.
Associates degree or other technical training and mechanical aptitude preferred.
Good verbal and written communication skills.
Must be physically able to climb, work in high and or confined spaces.
Must not be color blind.
QualificationRating
Must Have
Education
HS *Yes
Industrial
LIFT-MODRT *
     

  and 0 Yrs.
Industry
I-INSTRMNT
     

  and 2 Yrs.
Nice to Have
Industrial
ELECT-TRAD
     

  and 2 Yrs.
Industry
I-HVAC
     

  and 2 Yrs.

 
Job Number: 1710071867
Job Location: Saint Rose, LA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000239EmAAI&URLSource=cjhunter

Engineering Ground Test Laboratory Technician

Description:
PDS Tech,Inc. is seeking a F5 Engineering Ground Test Laboratory Technician for an open position in Stratford, CT.
  • Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities. 
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs. 
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing. 
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly. 
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics. 
  • Must be able to work from elevated work platforms at various heights. 
  • Must be willing and able to work in inclement weather. 
  • Must be capable and comfortable working within a diverse team environment. 
  • Must possess skills and aptitude to operate test facilities and data acquisition systems. 


 
Job Number: 1710075343
Job Location: Stratford, CT
Per Diem: No
Duration: 18 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023LEAAA2&URLSource=cjhunter

Environmental Engineers

Description:
Environmental Engineers - Located Downtown, St. Louis, MO - working for a top rated company in St. Louis, MO

Email resume to: mmccarthy@pdstech.com or contact Mary Ann McCarthy @314-720-0572

Looking for candidates with the following background - this is a long term contract assignment
 

·        Addressing environmental impacts of selected capital projects as well as helping all team members manage tasks and timely deliverables associated with their work on capital projects. 



·        Serve as an effective liaison between the PM and ENV groups as work load dictates.



·        Conducts environmental assessments and audits, environmental due diligence analysis and sustainability initiatives/environmental management system.



·        Design, install, operate and maintain measuring apparatus to determine the level of pollutants involving air, land, and water.



·        Ensure the organization's conformance to federal, state, and local environmental legislation. Requires a bachelor's degree in area of specialty.



·        Prepare engineering calculations and supporting analysis of alternatives.



·        Calculate actual & potential emissions from various sources for emission inventories.


Skills:



Excellent organization and project management skills



Experience in Industrial Wastewater Treatment



Experience with Multimedia Environmental Compliance



Education/Experience:



Bachelor’s Degree in Civil/Environmental Engineer



EXPERIENCE (YEARS/TYPE):



Minimum of 10 of years’ experience


 
Job Number: 1710076550
Job Location: Saint Louis, MO
Duration: 18 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023NdqAAE&URLSource=cjhunter

Exhaust Processor - AZ - OM

Description:
Chipton-Ross is seeking an Exhaust Processor for an opening in Tempe, AZ.

RESPONSIBILITIES:
Main function is to vacuum process and assemble components for the manufacture of bare image intensifier tubes for use in night vision products. The Exhaust Processor receives the preassembled tube and loads it into the exhaust station. They then process and activate the tube and cathode under ultra-high vacuum. The tube is then sealed and unloaded. All process data is recorded in the quality tracking system (QTS), then the tube and the accompanying paperwork are delivered to Initial Test (I-Test).

REQUIRED EXPERIENCE:
Must be able to follow written procedures and complete assigned work in a timely manner to keep production schedule while maintaining acceptable yields as determined by area supervisors and engineers
General knowledge of ultra-high vacuum technology (OJT provided)
Basic computer knowledge for data entry and email communication OJT forms and visual aids
Basic electrical knowledge, Lock-out/Tag-out and industrial safety (OJT provided)
Use of hand tools, including but not limited to, power drivers and torque wrenches
Use of Digital Multi-Meters (DMM), high voltage probes and general electronic equipment
This job has considerable physical demands

ADDITIONAL EXPERIENCE:
Initiative; Persistence; Integrity; Time Management; Judgment and Decision Making; Effective Communication; Attention to Detail; Adaptability/Flexibility; Effective Problem Solving

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Friday Ending, Full-Time
5:45pm - 6:00am; Wed, Thurs, Friday, EOS

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 165946
Job Location: Tempe, AZ
Rate: Up to $15.00 DOE
Duration: 4 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

FAA Assembly & Test Technician - Level 2

Description:
PDS Tech, Inc is seeking a candidate for the FAA Assembly & Test Technician Level 2 position located in Tulsa, OK.  
Performs standard testing processes on a variety of equipment and records and analyzes results.
Requires knowledge of industry specific tests and testing equipment.
Requires High School Diploma and 2-4 years of experience in the field or in a related area.
Familiar with standard concepts, practices, and procedures within a particular field.
Relies on limited experience and judgment to plan and accomplish goals.
Performs a variety of tasks. Works under direct supervision.
A certain degree of creativity and latitude is required.
Typically reports to a supervisor. 

 

Painting experience preferred.
Preparation of metal surfaces, masking and application of various coatings.
Experience and knowledge of specifications associated with various paint coatings. 

Special Considerations: 
Lifting is generally at or below 30Lbs. without significant repetitions.
Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
​ Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
 
Job Number: 1710077630
Job Location: Tulsa, OK
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023QokAAE&URLSource=cjhunter

FAA Painter - Level 2

Description:
PDS Tech, Inc is seeking a candidate for the FAA Painter Level 2 position located in Tulsa, OK.  
 Operates a spray painter to apply industrial paint finishes on metal products.
Requires a high school diploma or its equivalent.
May have to complete an apprenticeship and/or formal training in area of specialty with 2-4 years of experience in the field or in a related area.
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Relies on instructions and pre-established guidelines to perform the functions of the job.
Works under immediate supervision.
Primary job functions do not typically require exercising independent judgment.
Typically reports to a supervisor/manager.
Special Considerations: Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
Exposure to machinery, chemical, biological, and physical risks is minimal. 

 
Job Number: 1710077631
Job Location: Tulsa, OK
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023QopAAE&URLSource=cjhunter

Facilities Plant Engineer 4 - Top Secret

Description:
PDS Tech is seeking a Facilities Plant Engineer for an open position in North Charleston, SC.
In this position you will:

  • Lead project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds.
  • Review architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action.
  • Lead project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds.
  • Review civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action.
  • Lead teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.).
  • Lead others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs.
  • Participate on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.er requirements.
  • Plan, manage, and execute large or complex projects
  • Lead a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies.
  • Manage project expenditures within authorized budgets.
  • Create, maintain, and communicate project management information.
  • Manage the creation of contract scope.
  • Ensure suppliers comply with all contract obligations. Lead in the interpretation and analysis of applicable regulations, standards, codes, and ordinances with respect to project requirements.
  • Offer project alternatives in order to assure compliance.
  • Provide support, as required, to secure permits.
  • Provide civil/structural construction support for all significant and major projects.
  • Monitor condition of flight line concrete condition.

Education and Experience:
  • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

 
Job Number: 1710073735
Job Location: Chantilly, VA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HBRAA2&URLSource=cjhunter

Facilities Plant Engineer 4 - VA - C

Description:
Chipton-Ross is seeking a Facilities Plant Engineer for an opening in Springfield, VA.

RESPONSIBILITIES:
Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads teams to develop complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Leads others in engineering and facilitating the implementation of complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Participates on or leads cross-functional teams to integrate the activities of multiple engineering disciplines, technicians, outside consultants and government agencies.Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Reviews electrical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads project teams to develops complex conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Reviews mechanical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials and takes appropriate corrective action. Leads team to ensure accuracy of drawing archives/libraries. Oversees review of contractor redlines. Provides oversight to identify errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. Leads teams that manage and support complex construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. Oversees preparation and presentation of project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives. Leads in the production or procurement of detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. Reviews and approves documents. Leads in the translation of customer requirements to design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Develops and updates design standards and site-specific operating procedures in order to establish common practices. Participates in technical committees. Leads the business decision making process by providing input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts. Leads in translation of customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements.Plans, manages, and executes large or complex projects. Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Manages the creation of contract scope. Ensures suppliers comply with all contract obligations. Leads in the interpretation and analysis of applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.


FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 165303
Job Location: Springfield, VA
Rate: $DOE
Duration: 12 Months
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fire Protection Engineer

Description:
FIRE PROTECTION ENGINEER

Full awareness and working knowledge of Building and Fire Codes and NFPA Codes and Standards.
5+ years’ experience in the design and construction of fire protection systems and/or fire protection consulting.
Excellent communication skills.
Working knowledge of AutoCAD.

Preferred Qualifications Bachelor’s Degree in Fire Protection Engineering
Specific experience with theme parks, resort hotels, and mixed-use facilities.
Knowledgeable in OSHA compliance.
Knowledge in the use and application of computer modeling tools for fire and smoke spread and timed egress analysis.
Experience with codes and standards development, including committee involvement (e.g. NFPA, ASTM, ICC, CFR, etc.).
Experience with fire testing and regulatory application of fire test methods to building materials.

SUMMARY
Provides subject matter expertise in the following areas: fire protection, life safety, building and fire codes, fire hazard and risk assessment of materials and processes, fire and smoke spread, industrial fire hazards, fire investigation support, and other fire and life safety issues.

Types of facility assets involved include a wide variety of facility and occupancy types, including public assembly, retail, storage, warehousing, high-rise hotel and office, residential, commercial cooking, dining, industrial, and special amusement buildings. Systems accountabilities include fire detection and alarm, automatic sprinkler, water-based fire protection systems including water supplies and fire pumps, smoke control and smoke management systems, means of egress, exiting, and emergency movement of people and crowds in public assembly, commercial cooking fire protection, special hazards fire protection systems, life safety systems, building automation and controls, and explosion protection. In addition, the position will require an individual that can operate in an environment of diverse general engineering knowledge in other areas such as codes, hazardous materials storage, use, and handling; gas alarm systems; elevator, conveyance, and ride safety; pyrotechnics; OSHA and general safety.

Job tasks include field engineering support; technical input for inspection, testing, and maintenance; codes analysis; design and specifications; plans review; fire hazard assessment; system downtime response and troubleshooting; investigation, root cause and failure analysis; and general consulting on fire/life safety issues. Design systems including calculations, drawings, and submittals. Review system designs developed by project design teams for accuracy, compliance with company standards and guiding principles, quality and completeness. Recommend system improvements, enhancements and replacements.
 
Job Location: Orange, CA
Input Date: 11/01/2017
Firm Name: NESC STAFFING
Attention: Christina Ellis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 11/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Ground Test Structural Lab Technician

Description:
PDS Tech,Inc. is seeking a F5 Engineering Ground Test Laboratory Technician for an open position in Stratford, CT.
  • Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities. 
  • Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs. 
  • Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing. 
  • Must possess a strong aptitude for industrial hydraulic component fabrication and assembly. 
  • Must be able to read and interpret engineering mechanical drawings and fluid power schematics. 
  • Must be able to work from elevated work platforms at various heights. 
  • Must be willing and able to work in inclement weather. 
  • Must be capable and comfortable working within a diverse team environment. 
  • Must possess skills and aptitude to operate test facilities and data acquisition systems. 


 
Job Number: 1710075326
Job Location: Stratford, CT
Per Diem: No
Duration: 18 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023LCYAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Technician

Description:
1st and 2nd shift available

Job Description
Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
• Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
• Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
• Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
• Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
• Must be able to work from elevated work platforms at various heights.
• Must be willing and able to work in inclement weather.
• Must be capable and comfortable working within a diverse team environment.
• Must possess skills and aptitude to operate test facilities and data acquisition systems..
 
Job Number: CT39325
Job Location: Stratford, CT
Rate: $37.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 10/31/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

HVAC/Mechanical Engineer

Description:

Primary Responsibilities:



Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers



Must ensure deliverables meet the scope and client expectations 



Support procurement activities, including coordination with vendors and vendor drawing reviews



Support contractor reviews, and installation planning activities



Individual will travel globally for machine installation, check out and start up



Candidate will plan the work, and track and report work in progress



Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate


Qualifications:



 



BS or MS in Mechanical or Chemical Engineering required



7 to 10 years of related experience is required. Experience with an engineering consulting firm is a plus.



Candidate should possess good experience on HVAC systems, utilities and fire systems design



Knowledge of design problems of civil and industrial area of various kinds and, possibly, related to fire protection it would be considered an asset 



Experience in setting, development, evaluation and implementation of projects for air conditioning systems, generation and distribution utilities in the industrial and civil sectors



Knowledge of issues related to the pharmaceutical, consumer products, and chemical industry would be an advantage



Knowledge of boiler systems is preferred



Candidate must be able to calculate heat balance, air balance, mass balance, line sizing, and duct sizin



Knowledge of international standards such as ASME, AMCA, ASHRAE , SMACNA ACGIL are required



Should be able to select and size the boilers, fans, coils, duct, and other HVAC elements



Candidate must possess good communication skills and be able to successfully interact with clients on global project



Microsoft Office experience is required



AutoCAD and SolidWorks experience is preferred



Domestic and international travel will be required


 
Job Number: 1610057836
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhcTAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT UX Designer

Description:
IT UX Designer

Location: Savannah, GA
Pay Rate: DOE
Duration: Long Term Contract
Shift: First

Unique Skills:
-You'll provide user experience guidance to Company business units including Sales, Marketing, Completions, Product Support, and Business Technology.
-You'll collaborate on the day-to-day design of products that assist pilots in their flight-planning efforts, that facilitate collaboration between our interior designers and our customers, and that leverage industry-first AR/VR technology to allow our users to envision the future of Company's products.
-You'll use design research methods to gather requirements from users and business stakeholders.
-You'll work in an Agile Scrum process and will be co-located with team members with roles as Scrum Masters, Developers, and Quality Assurance Analysts. You'll play a key role in the evolution of our mobile style guide into a system of design patterns.
-You'll help shape the look and behavior of our products, while working alongside stakeholders from our various business units.
-You'll build a living library of patterns, and help communicate its value to the organization.
-We'll be expanding the reach of the User Experience Design team from native mobile apps to other parts of the business.
-This reach could include platform agnostic technologies and embedded software, which means experience with responsive design or physical UI controls are of added benefit.

Education and Experience Requirements:
Bachelor's Degree in User Experience Design, Graphic Design, Industrial Design, Human Computer Interaction or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience. 3 years experience as a UX professional.

Position Purpose:
Define interaction models, user task flows, and interface specifications. Communicate scenarios, end-to-end experiences, and screen designs to stakeholders and development teams. Typically responsible for ownership of a small project or a significant portion of functionality on a product release. Informally presents design concepts and deliverables to design team; works with more senior designers to get approval to move projects forward and drive them to completion. Participates in both internal and external design reviews.

Principle Duties and Responsibilities/Essential Functions:
1. Gather user needs via design research methods.
2. Communicate learnings and requirements to business colleagues.
3. Generate ideas via sketches, mockups, and prototypes for testing with users.
4. Research existing design patterns and best practices and apply to design problems.
5. Critique and refine design ideas with UX team members.
6. Create user tasks and conduct usability tests to evaluate concept directions.
7. Create mockups and prototypes to communicate desired directions to development team members.
8. Create final specs and assets for implementation.
9. Work collaboratively with developers to create solutions that find a balance between business needs, usability, and development effort.
10. Support and improve our existing portfolio of products.

Additional Functions:
1. Proactively identifies opportunities to improve existing methodologies, processes or other areas of performance.
2. Proactively communicates issues and status as required. Perform other duties as assigned.

Other Requirements:
1. Experience working in teams.
2. Experience with Agile Scrum development methodologies preferred.
3. A portfolio of work that demonstrates your skills, and the ability to articulate your role on the projects it contains.
 
Job Number: 7951
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Indust/Com Graphic Artist I

Description:
PDS Tech is seeking a candidate for the Industrial/Computer Graphic Artist position located in Troy, MI.  

This individual is responsible for the creation of assets, templates and tools used to develop and deliver training materials and courseware.
These materials may be produced for many different industries and will be delivered through Web, Interactive Distance Learning (IDL), Virtual Classroom Training (VCT), and Instructor Led Training.
This individual is responsible for designing and developing media content for training materials that is:
•Meets design intent and customer expectations
•Functionally-sound and visually effective
•Well documented
•Completed in accordance with project plans and schedules
 
The ideal candidate has a background in web development and content production, is comfortable working within a standardized programming structure, thinks creatively, excels in a collaborative team environment, and is detail oriented.
This individual has a solid understanding of numerous web technologies (Flash/Actionscript, HTML, HTML5, Javascript, XML, etc.) and is responsible for creation/conceptualization of templates, tools, interfaces, and advanced interactive elements (games, simulations, etc.)
A professional attitude, ability to follow technical and workflow processes, and solid communication skills are essential.
  • Creating and/or modifying interactive media content utilizing a variety of web and graphics development tools such as HTML5, XML, CSS, and Flash.
  • Utilizing a multiple LCMS tools to populate media content: Incorporating external media (audio, video, 2d/3d artwork, etc.) into deliverables, setting variables/parameters.
  • Developing conceptual and technical graphics of varying degrees of complexity.
  • Photo retouching/manipulation.
  • Participating in content design and planning throughout the development process.
  • Style and theme development (GUI, branding, etc.).
  • Project team coordination and client communications.

Documentation of project-specific standards and processes Required Skills:

  • Advanced web content development using HTML5, Javascript, XML, CSS
  • Strong understanding of C#, PHP, and other programming languages.
  • Adept with development for mobile deployment (tablets, smart phones, etc.)
  • Advanced Adobe Flash CS5 or higher with demonstrated ability to produce interactive animations using ActionScript 3.0
  • Experience coordinating teams, schedule tracking, and general project leadership abilities.
  • Ability to perform design/development duties with minimal coaching, and adhere to instructions and pre-established guidelines, as assigned
  • Ability to multi-task and work on multiple projects in a deadline-oriented environment
  • Must be organized and work well both independently and in a fast paced team environment.

Intermediate software skills in MS Word, PowerPoint and Excel Desired Skills (not required):

  • Knowledge of SCORM, Learning Management Systems
  • Knowledge of game design and development engines, such as Unity.

 
Job Number: 1610048489
Job Location: Troy, MI
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000026Hd9AAE&URLSource=cjhunter

Industrial & Process Engineers

Description:
CAD, CAM, ERP
 
Job Number: 39385/6
Job Location: Florida
Duration: direct
Input Date: 11/27/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
800 Phone: 866/277-3343
Email: jacksonville@apollopros.com
Website: www.apollopros.com

Industrial Engineer

Description:
General Summary:
The Industrial Engineer leads process optimization efforts to address specific business requirements and to eliminate waste from Assy process, reducing costs, improving quality, and improving customer satisfaction. This position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.
 
Duties and Responsibilities:
  1. Leads process optimization efforts to address specific business requirements and to eliminate waste from Assy processes.
  2. Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
  3. Collects and analyzes data and metrics and presents the information to large audiences.
  4. Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
  5. Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
  6. Provides productivity planning with accompanying future strategies for improvement.
  7. Develops and maintains engineered time standards.
  8. Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
  9. Develops and maintains plant standards.
  10. Creates and maintains valve stream maps.
  11. Plans, schedules, and prioritizes work to meet established deadlines.
  12. Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
  13. Determines and improves processes to meet production levels.
  14. Schedules and sequences job plans (with ME approval) to support effective work flow.
  15. Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
  16. Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

Education, Work Experience, Certification and/or Licensure:
  1. Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major).
  2. 5+ years experience in aerospace industry in aerospace manufacturing.

Knowledge, Skills and Abilities:

  1. Strong analytical and innovative skills.
  2. Strong work ethic.
  3. Ability to multitask.
  4. Ability to work under minimal supervision.
  5. Detail oriented.
  6. Excellent problem solving skills.
  7. Ability to read and interpret engineering drawing and/or specification requirements.
  8. Excellent communication skills, both verbal and written.
  9. Excellent presentation skills.
  10. Strong working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
  11. Basic experience utilizing tools such as CATIA, SAP, CAD CAM, and Microsoft Office Suite.
  12. Knowledgeable of various manufacturing principles, engineering practices, mathematics, materials, and physical sciences to review detailed designs and drawings.

Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.  

 
Job Number: 1710071796
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002390MAAQ&URLSource=cjhunter

Industrial Engineer

Description:
-Holiday Pay
-Medical
-Dental
-Vision
-Short-Term Disability
-Direct Deposit
-401(k) Immediate Enrollment
-Annual Bonus
-Referrals
-Personal Communications
 
Input Date: 01/23/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545, 817/354-5555
800 Phone: 866/758-2494
Email: resumes@agentetech.com
Website: www.agentetech.com

Industrial Engineer - 2- DoD Secret and Special Access Clearance

Description:
PDS Tech, Inc. is seeking a candidate for Industrial Engineer - 2- DoD Secret and Special Access Clearance position located in Moss Point, MS. 

Position Summary / Responsibilities



  • Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.
  • May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations.
  • Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems.
  • On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods.
  • May assist facilities engineers in the planning and design of facilities.

Qualifications:
Basic Qualifications:
  • Bachelors of Science Degree in Science, Technology, Engineering or Math (STEM), and 2 years relevant work experience. 
  • The ideal candidate will have experience in an Industrial Engineering role, aerospace manufacturing processes, MES/SAP and EVMS. 
  • Must be able to Obtain and Maintain an Active Secret Clearance with SAP.

 
Preferred Qualifications:

  • Active DoD Secret and Special Access Clearance.

 
Job Number: 1710072335
Job Location: Moss Point, MS
Duration: 23 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023AaZAAU&URLSource=cjhunter

Industrial Engineer 2 (4) - FL - O/M

Description:
Chipton-Ross is seeking 4 Industrial Engineers for openings in Jacksonville, FL.

RESPONSIBILITIES:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion.Strong scheduling experience desired with familiarity in Microsoft Project or other scheduling related software. Familiarity with critical path methodology and project management.

EDUCATION:
Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or an accredited Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.

FULL TIME/FIRST SHIFT
WORK HOURS: 6:00 AM - 2:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166116
Job Location: Jacksonville, FL
Rate: $DOE
Duration: 5 Months
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Industrial Engineer 2 - Secret

Description:
PDS Tech is seeking an Industrial Engineer for an open position in Jacksonville, FL.
In your role, you will:

  • Applies basic Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations.
  • Develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide summary analysis and metrics as directed by higher level employees for consultation to customers (e.g., management, departments, suppliers).
  • Applies basic industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
  • Researches, designs, develops, improves, and implements processes as directed to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
  • Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to assist in developing optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products.
  • Analyzes and supports the design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

As our ideal candidate, you will meet the following requirements:
  • Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

 
Job Number: 1710076634
Job Location: Jacksonville, FL
Duration: 5 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jyotsna Sivan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Nr5AAE&URLSource=cjhunter

Industrial Engineer 3

Description:
PDS Tech is seeking an Industrial Engineer for an open position in Berkeley, MO
In your role you will:

  • Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers).
  • Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements.
  • Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization.
  • Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation).
  • Ensures project is completed within budget.
  • Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products.
  • Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.
     

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
 
Job Number: 1710073315
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023G1mAAE&URLSource=cjhunter

Industrial Engineer II (FL)

Description:
US Citizen Only. Interim Secret Not Required To Start

SEVERAL OPENINGS IN JACKSONVILLE, FL.

Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Must be comfortable working in a factory environment, working closely with the build team.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.
 
Job Number: IEIIFL
Job Location: Jacksonville, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: janice.plattner@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III (LA)

Description:
SEVERAL OPENINGS

The ideal candidate will have experience:
- Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis,
Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting,
Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
- Proficiency and experience using Microsoft Office suite including MS Project.
Candidate must be able to:
- Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
- Interact with employees to gather data for process development and improvements. This may include observing and
documenting processes, and collecting data in manufacturing areas or in assemblies during various production phases.
- This position requires the ability to walk, stand, and enter into work areas via steps or ladders as needed. Candidate may
be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use.

The position required the use of advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
 
Job Number: IEIIILA
Job Location: New Orleans, LA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III (MO)

Description:
SEVERAL OPENINGS

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: IEIIIMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Industrial Painter III - CA

Description:
Chipton-Ross is seeking an Industrial Painter III for an opening in Menlo Park, CA.

Entry level position for the Paint Department. Will be trained in the painting of airbourne antenna systems, composite radomes, metal parts and related hardware. This will include preparing, priming and spray painting various types of paints in a controlled environment using a spray gun, spray booth and curing ovens

RESPONSIBILITIES:
1. Performs simple to complex paint, masking & curing tasks, with various industrial coatings, oven-curing, and finish work.
2. Spray paint metal, composite and plastic structures in a controlled environment
3. Will spray paint assemblies, subassemblies and parts.
4. Prepares surfaces per documentation, includes masking, sanding, cleaning and media blasting as required.
5. Mix paints and primers to manufactures specifications.
6. Cleans spray equipment and maintains paint booth and curing ovens
7. Works with epoxies, resins, and other chemical compounds, mixing according to specified formulas.
8. Does inprocess inspection, documents results, maintains records, and prepares reports.
9. Performs routine testing, such as coating thickness, resistance, tape and adhesion.
10. Maintain a 6S Continuous Improvement work area. This daily task is required of all shop employees.
11. Performs limited, intermittent physical exertion. Work environment may contain noise, dust, heat, or chemicals.
12. Competent using hand inspection tools ie, Calipers & Micrometers.
13. Maintain full compliance with respect to all EH&S and safety requirements. Advise shop supervisor of any non-compliant issues immediately.

REQUIRED EXPERIENCE:
Ability to do simple math and the knowledge to use a variety of hand tools, including sanders and grinders.

PREFERRED EXPERIENCE:
Body Shop painting experience is considered a plus. The ability to read drawings (blueprints), operation sheets, and scales, is a plus but not required.

ADDTIONAL EXPERIENCE:
Flexible to work varied shifts, overtime, weekends and travel on occasion.
Able to occasionally stoop, bend, kneel, and squat.
Able to occasionally push, and reach.
Able to lift 50 pounds close to the body repetitively. (Employees need to ask for assistance and use material handling tools for lesser weight in awkward location and/or body positions and for any items over 50 pounds).
Must have good repetitive manual dexterity with both hands.
Must have sufficient vision to see relative differences in color and shading.
Based upon your job duties, and need to visit different areas within Randtron, you may be exposed to; fumes, dust, toxic or caustic chemicals (well below OSHA and ACGIH exposure guidelines), outdoor weather, moving mechanical parts and/or be part of a hearing conservation program due to noise levels around certain equipment.
Must be able to pass a respirator medical physical. May not have facial hair and be clean shaven per California and Federal OSHA requirements to ensure a proper fit of respiratory protection.
Must wear appropriate personal protective equipment as necessary.
Ability to sit for extended periods of time.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, Full-Time
 
Job Number: 165549
Job Location: Menlo Park, CA
Rate: $20 to $25.00 DOE
Duration: 6 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

Laborer, Grounds Maintenance- Interim Secret Clerance

Description:
PDS Tech is seeking a candidate for the SCA Laborer, Grounds Maintenance- Secret Clearance position located in Lexington, KY.  
  • Provide general cleanup, yard maintenance, material moving, light facility maintenance and other team support duties as assigned.
  • Experience with light industrial maintenance and warehouse work is desired.
  • Willing to clean, mop, empty trash and perform other cleaning duties.
  • General labor experience is desired with previous forklift experience, medical card and must be able to lift up to 40 pounds.

Mandatory Skills:
  • Previous forklift experience


Desired Skills:

  • Experience driver: less than 26,000 pound capacity truck, medical card with driver's license, Forklift training, mule or buggy training, Physically able to lift 40 pounds, 




 
 
Job Number: 1710073761
Job Location: Lexington, KY
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HE1AAM&URLSource=cjhunter

Lead Laser Controls Senior Software Developer-OM

Description:

Lead Laser Controls Senior Software Developer

Chipton-Ross is seeking a Sr. Software Developer Lead capable of leading the development of the High Energy Laser control systems, signal and image processing programs.
This individual will also lead new business pursuits related to both airborne active and passive multi-spectral EO/IR sensors for surveillance, targeting, laser acoustic signal processing, 3D LIDAR image formation and mapping, and target recognition located in Rancho Bernardo, CA.

DUTIES AND RESPONSIBILITIES:
Provide technical leadership to a software development team for High Energy Laser control system development.
Manage schedules and report progress to program leadership.
Responsible for leading the development of High Energy Laser control systems including leading a team of developers, developing a system architecture that includes subsystem and segment interfaces, such as battle management, safety, and fire control.
Specify throughput, processing architecture, and I/O bandwidth requirements.
Support field tests.
Provide schedule, tasks, and work definitions for software implementation.
Represent GA-EMS LAS SWIPE group to customers internal and external on technical approach and schedule.
Identify risks and solutions necessary to meet demanding program schedules, recommend approach that moderate risk while meeting overall performance requirements.
Provide technical briefings to internal and external customers.
Provide technical documents on design and performance analyses.
Performs other duties as assigned of required.


Essential Qualifications:
Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or related discipline and progressive software development experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent experience in lieu of education.
Must have a detailed and extensive expertise of software development concepts, principles, and theory and have applied that knowledge in the development of new principles and concepts.
Demonstrated project and/or program leadership skills including organizing, planning, scheduling, and coordinating workloads to meet established project deadlines or milestones.
Must possess the ability to contribute to the development of new concepts and principles; resolve unusually complex problems; serve as spokesperson on projects and/or programs; and be an expert in one or more areas of software development.
Strong communication, presentation, and interpersonal skills are required enabling an effective leadership interface with other departments, all levels of management, professional and support staff, customers, potential customers, and government representatives.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced software development problems.
Must be able to work on a self-initiated basis and in a team environment.


Hard Requirements:
Typically requires a bachelors degree, masters degree or PhD in computer science, information systems or related discipline and progressive software development experience as follows; fifteen or more years of experience with a bachelors degree, thirteen or more years of experience with a masters degree, or ten or more years with a PhD. May substitute equivalent experience in lieu of education.
Ability to obtain and maintain a Security Clearance is required.
The successful candidate will have a wide range of experience developing complicated software systems distributed among heterogeneous computing environments.
Demonstrated knowledge of VxWorks and Linux is required.
In-depth knowledge of embedded hardware and software is required.
Extensive knowledge of C and C++ is required.
Must have a detailed and extensive expertise of software development concepts, principles, and theory and have applied that knowledge in the development of new principles and concepts.
Demonstrated project and/or program leadership skills including organizing, planning, scheduling, and coordinating workloads to meet established project deadlines or milestones.
Must possess the ability to contribute to the development of new concepts and principles; resolve unusually complex problems; serve as spokesperson on projects and/or programs; and be an expert in one or more areas of software development.
Strong communication, presentation, and interpersonal skills are required enabling an effective leadership interface with other departments, all levels of management, professional and support staff, customers, potential customers, and government representatives.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced software development problems.
Must be able to work on a self-initiated basis and in a team environment.
Able to work extended hours as required.

MISC:
Able to work extended hours as required.
Duration: 6 month temp to hire

San Diego, California
Work Week: 5/40


About the client:
Client, and its affiliated companies, is one of the worlds leading resources for high-technology systems development ranging from the nuclear fuel cycle to remotely piloted aircraft, airborne sensors, and advanced electric, electronic, wireless and laser technologies.

Cleint's Electromagnetic Systems (GA-EMS) designs and manufactures first-of-a-kind electromagnetic and electric power generation systems. GA-EMS expanding portfolio of specialized products and integrated system solutions support critical fleet, space systems and satellites, missile defense, power and energy, and process and monitoring applications for defense, industrial, and commercial customers worldwide.


 
Job Number: 165947
Job Location: San Diego, CA
Rate: $DOE
Duration: 6 months Contract to Perm
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Max Cameron
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mcameron@chiptonross.com
Website: www.chiptonross.com

Lead Systems Engineer -Secret

Description:
PDS Tech Inc is seeking a Lead Systems Engineer for an open position in Herndon, VA

Main duties will include, but not be restricted to:



  • Managing an engineering team that integrate existing payloads onto the  satellite buses
  • Development of satellite constellation architectures in support of DoD/Intelligence Community requirements
  • Interface with US Government and industrial partners technical teams to explain the capabilities of satellites
  • Lead the team responsible for writing the technical components of RFPs to the US government agencies
  • Speak at public events and conferences
  • Serve as the chief engineer for OneWeb based satellite programs

Skills and Qualifications:



  • Experience working with US DoD and Intelligence Community Space professionals.
  • 10+ years experience working as a design engineer on satellites
  • Bachelor's degree in STEM field and Masters degree in Systems Engineering would be a plus.
  • Experience tailoring an existing satellite to meet new requirement.
  • Experience in Program Management.
  • Understanding of Military Space acquisition process.
  • Existing relationships with Government Program Offices.
  • A strong technical grasp of existing and future DoD/IC Space Programs.
  • Proven ability to work to create meaningful output to guide and open business.
  • Ability to build and maintain strategic relationships with key partners and customers.
  • Excellent verbal and written skills in English, other language skills would be advantageous (French and German).
  • Ability to work in a team and demonstrate good interpersonal skills.
  • Ability to obtain relevant security clearances (TS/SCI).
  • US citizenship

 
Job Number: 1710070877
Job Location: Herndon, VA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023682AAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB / Product Review Engineer II (FL)

Description:
INTERIM SECRET NOT REQUIRED TO START.

Applies basic Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide summary analysis and metrics as directed by higher level employees for consultation to customers (e.g., management, departments, suppliers). Applies basic industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes as directed to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to assist in developing optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and supports the design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Job Number: MRBfl
Job Location: Jacksonville, FL
Rate: up to $50/hour
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Machine Operator - Level 2

Description:
PDS Tech, Inc. is seeking a candidate for Machine Operator- Level 2 position located in Munice, Indiana.
  • Sets up and operates a production machine in accordance with established procedures and guidelines.
  • Reads and interprets blueprints and diagrams to select, position and secure machinery.
  • Adjusts machine settings to complete tasks accurately, according to specifications, and in a timely fashion.

Requires a high school diploma or its equivalent.
May have to complete an apprenticeship and/or formal training in area of specialty with 2-4 years of experience in the field or in a related area.
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Relies on instructions and pre-established guidelines to perform the functions of the job.
Works under immediate supervision.
Primary job functions do not typically require exercising independent judgment.
Typically reports to a supervisor/manager.

Special Considerations:
Lifting is generally at or below 30Lbs. without significant repetitions.
Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.

 
Job Number: 1710067919
Job Location: Muncie, IN
Duration: 8 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012ZScAAM&URLSource=cjhunter

Machine Operator Level 2

Description:
PDS Tech, Inc. is seeking a candidate for Machine Operator - Level 2 in Muncie, IN.
  • Sets up and operates a production machine in accordance with established procedures and guidelines.
  • Reads and interprets blueprints and diagrams to select, position and secure machinery.
  • Adjusts machine settings to complete tasks accurately, according to specifications, and in a timely fashion. 

  • Requires a high school diploma or its equivalent.
  • May have to complete an apprenticeship and/or formal training in area of specialty with 2-4 years of experience in the field or in a related area.
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision.
  • Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor/manager.
  • Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions.
  • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
  • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.

 
Job Number: 1710067274
Job Location: Muncie, IN
Duration: 7 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021noRAAQ&URLSource=cjhunter

Maintenance Mechanic

Description:
TECHNICAL ASSOCIATE (NO Machinists)

Maintenance Mechanic

2nd shift (must be able to train on 1st shift, 6 am - 2:30 pm, for 1 month).
Shifts will be as follows:
2nd shift: 2PM to 10:30 PM


The Technician will support coating process development and industrialization efforts, coating equipment operation and maintenance, and data documentation and reporting.

DESIRED: Maintenance mechanic that has hands-on experience with operation plans.

 
Job Number: 1710065854
Job Location: Cincinnati, OH
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021a7sAAA&URLSource=cjhunter

Maintenance Technician

Description:
PDS Tech is seeking a Maintenance Technician for an open position in Clover, SC
Job Duties: 

• Use a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters. 

• Plan layout and installation of electrical wiring, equipment and fixtures, based on job specifications and NFPA codes. 

• Performs calibration of instruments using various testers as stated on manufacturer manuals or standard work document. 

• Identify and react to facility and equipment related maintenance issues in a timely and efficient manner. 

• Perform preventive and repair maintenance tasks from written and verbal instructions. 

• Documents all labor and material usage on designated work order system. 

• Prioritize work assignments based on supervisor and production requirements. Keep supervisor informed of pending maintenance issues. 

• Actively participate in suggestion and continuous improvement initiatives while supporting the 5s agenda. 

• Maintain work environments in a safe and orderly condition. 

• Follow all safety policies in the performance of job assignments in order to provide a safe working environment for all associates. 

• Performs minor plumbing, office and equipment repairs as directed/supervised by management. 

• Demonstrates adherence to all company policies and safety regulations in the performance of all assignments. 

• Promote a safe and productive work environment. 
Basic Qualifications: 

• High School Diploma or GED. 

• 5 years of Maintenance Technician or Mechanic experience including fabrication using lathes, mills, and shop equipment. 

• 5 years of an electrical background including troubleshooting low and high voltage circuits. 

• 5 years of power system knowledge, breakers panels, transformers, VFD’s and switch gears. 

• Minimum of 1-2 yrs of industrial sewing machine repair experience 



Preferred Qualifications: 

• Associate’s degree or Technical certificate (HVAC, Electronics) 

• 5 years of knowledge of PLC, electrical, and mechanical maintenance. 

• Gerber automated cutting equipment
 
Job Number: 1710062181
Job Location: Clover, SC
Per Diem: No
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Melanie Streat
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G6ASAA0&URLSource=cjhunter

Maintenance, Spec - CA

Description:
Chipton-Ross is seeking a Maintenance, Spec for an opening in Valencia, CA.

RESPONSIBILITIES:
Client designs, engineers, manufactures, repairs and overhauls a broad portfolio of aviation and industrial components, accessories, subassemblies, systems and aircraft structures. We partner with original equipment manufacturers (OEMs) and operators of commercial, regional, business and military aircraft worldwide, to provide products and services that solve their hardest problems. So whatever the part, component or complexity of assembly, Client is committed to quality, service and meeting the specialized needs of each customer.

Client participates at all levels of the aerospace supply chain - from single components, to complex systems, to aerospace structures and their contents. We provide solutions for the entire product life cycle of an aircraft - from raw material to aftermarket service. Our unique ability to integrate a broad range of products and capabilities is our competitive advantage.

The right candidate will performs work in more than one of the maintenance trades: carpentry, plumbing, painting, machine and equipment repair, electrical, sheet metal fabrication, and welding.

REQUIRED EXPERIENCE:
Individual will makes routine, periodic, or special inspections to determine repair and maintenance work necessary to prevent breakdowns of facilities, machinery, and equipment. Tests, inspects, troubleshoots, and repairs machines and equipment. Interprets blueprints, sketches, layouts, wiring diagrams, drawings, and specifications. Sets up and operates all tools and equipment necessary to perform assigned work.

Individual will be responsible for maintenance and repair of precision CNC and conventional equipment. Strong electrical/mechanical background with experience with multiple controls such as Fanuc, Mitsubishi, Yaskawa, and Fadal a plus. Must be able to read and interpret blue prints, electrical schematics, ladder diagrams, as well as be proficient with pneumatic and hydraulic systems. Clean and disassemble the equipment to evaluate and make proper visual inspection and diagnostic of mechanical components. Repair of pumps, motors, gear boxes conveyors, spindles, and tool changers. Knowledge of methods, procedures, tools and equipment used in plumbing, and electrical trades related to facilities including compressed air systems. Communicate productively in both oral and written form. Establish and maintain a positive working relationship with all levels of management and those contacted in the performance of require duties. Support the maintenance team activities like 5S housekeeping, continuous improvement and Kaizen. Follow company rules and safety guidelines.

EDUCATION:
AA degree or equivalent from two year college or technical school; or minimum four years experience and/or training; or equivalent combination of education and experience in related fields.

WORK HOURS:
Full-Time

 
Job Number: 164723
Job Location: Valencia, CA
Rate: $20 to $24.00 DOE
Duration: 2-3 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kin Riley
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: kriley@chiptonross.com
Website: www.chiptonross.com

Manufacturing Associate

Description:
PDS Tech, Inc. is seeking a candidate for the Manufacturing Associate position located in Chickasaw, AL. 

• Operates hand or power tools, forklifts, computers, and production equipment. 
• Performs team duties that may include managing meetings, communicating with other teams or individuals, managing documentation, records, and scheduling personnel. 
• Is responsible for maintaining Safety, Environmental Quality, Product Quality, Productivity, and Inventory accuracy for their area. 
• Arrange, load, move, package, handle, transfer, label, sample, and document process materials.
• Set up, adjust, clean, take apart, put together, or perform minor maintenance, on machines, or equipment. 
• Verifies equipment, or areas, are safe for normal use, hazardous work, servicing, or maintenance. 
• Monitors and controls processes using visual observation, process data, and on-line testing. 
• Identifies and troubleshoots problems in processes, products, or equipment, and work for a solution. 
• Gathers, maintains records, and uses statistical control charts. 
• May generate, handle, transfer, move, drum, label, sample, and document waste. 
• May prepare, load, move, and unload various materials. 
• Reasoning ability - Must be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. 
• Ability to interpret a variety of instructions. 
• Performs tasks assigned to operations as per Master Task List. 
• Ensures operational activities and process performance are aligned with business and unit goals. 
• Coaches and trains others on plant operations. 
• US Citizenship required 
• Steel toed shoes required
• Have both forklift experience and experience in a manufacturing or industrial setting. 
• Willing to work shift work including weekends 
• Forklift certification required 
 
Job Number: 1710074949
Job Location: Mobile, AL
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023K6qAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - (FL)

Description:
SEVERAL OPENINGS IN THE JACKSONVILLE, FL AREA

Interim Secret NOT REQUIRED to start. US Citizen only.

Assists in the development and implementation of production planning and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans and bill of materials. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.

Prefer Experience in post-production electrical routing and terminations; creation of graphic aids from model based definition; experience in HMS-CAPP and TeamCenter. Working with Design Engineering, Manufacturing Engineering/Planning, Quality Engineering, Liaison Engineering, Industrial Engineering and Operations to resolve Work Instruction and Design constraints.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering
 
Job Number: MFGEIIfl
Job Location: Jacksonville, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 4+ Months
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Manufacturing Engineer II/III

Description:
** Candidates must be U.S. Citizens - Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

There are two (2) Level II openings and two (2) Level III openings.

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications (Word, Excel).

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Keywords:
-Manufacturing Engineer
-Delmia preferred
–Maestro preferred
-Windchill preferred
-Propulsion components
 
Job Number: 372893
Job Location: Canoga Park, CA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 12/11/2017
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Manufacturing Engineer II/III (4) - CA

Description:
Chipton-Ross is seeking a Manufacturing Engineer II/III (4) for an opening in Canoga Park, CA.

RESPONSIBILITIES:
-There are two (2) Level II openings and two (2) Level III openings.
-The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

REQUIRED EXPERIENCE:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

PREFERRED EXPERIENCE:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) . -Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).

ADDITIONAL EXPERIENCE:
MANUFACTURING ENGINEER
AEROSPACE
Languages:
English: Read, Write, and Speak


EDUCATION:
BS degree in Manufacturing /Industrial Technology or Engineering required Skills and Experience

WORK HOURS:
5/40, Full-Time
 
Job Number: 165561
Job Location: Canoga Park, CA
Rate: $DOE
Duration: 6 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Manufacturing Engineer II/III

Description:
Manufacturing Engineer II/III

Location: Canoga Park, CA
Pay Rate: DOE ($38/hr - $48/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN**
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing).
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications (Word, Excel).

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Keywords:
-Manufacturing Engineer
-Aerospace
-Delmia
–Maestro
-Windchill
-Propulsion components
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: 32-48
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineers

Description:
Major aerospace company in Canoga Park has 6 Month+ contract positions open for experienced Manufacturing Engineers.

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) . -Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).

Keywords:
-Manufacturing Engineer
-Delmia
–Maestro
-Windchill
-Propulsion components
Keywords:
Education: BS degree in Manufacturing /Industrial Technology or Engineering required Skills and Experience:
 
Job Number: 12637
Job Location: Canoga Park, CA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 Months+
Start Date: December
Input Date: 11/27/2017
Firm Name: LOGIN CONSULTING SERVICES
Attention: Tali Lerea
Address: 300 CONTINENTAL BLVD STE 530
City, State: EL SEGUNDO, CA 90245-5067
Phone: 310/607-9091
Fax Phone: 310/607-9818
Website: www.loginconsult.com

Manufacturing Project Manager

Description:

Main Duties and Responsibilities:



Manufacturing Engineer to manage production system improvement for a newly developed wide-body commercial airplane.  Should have final assembly expertise.



Qualifications:



* US person
* Degree in Manufacturing, Industrial, Mechanical, Aerospace, or Civil Engineering required. 



* Minimum 10 years wide-body aircraft production system industry experience in US, Canada or Europe.



* Strong communication and organizational skills



* Ability to handle multiple priorities and work well under tight deadlines



* Positive attitude and team player



* Ability to adapt and be flexible in a fast-changing business and diverse cultural environment

Ability to speak Mandarin would be a plus



 
Job Number: 1710076078
Job Location: Newport Beach, CA
Duration: 9 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MhvAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler

Description:
Velocity represents an internationally known leader in the design and manufacture of aerospace fastening, bushings and fittings. Our client has developed innovative products for both metal and composite applications that are used on commercial and military rotor and fixed wing aircraft worldwide. Their products are approved and used by virtually every airplane and helicopter manufacturer. Our client is currently looking for a Material Handler for its manufacturing operation in Tukwila, WA.
Key Responsibilities:
• Must be able to read and understand drawings and blueprints.
• Must be familiar with network driven data sources. (Epicor, PLM, Internet Explorer, etc.)
• Must be able to operate Industrial Band Saws, Overhead Crane, Pallet Jacks, Forklifts, Snips, and Bander, with little or no assistance.
• Become proficient in load pulling, load preparation, and truck loading, with training.
• Learn and understand material requirements, to assist Engineers, Buyers, and Planners with material planning and substitutions.
• Calculate and cut raw material stock, per specified cut instructions.
• Must be able to understand and follow verbal and written communications, in English.
• Must be able to assist Raw Material Lead with other duties, as assigned.
• Must wear and maintain proper Personal Protective Equipment (PPE), at all times.
Core Competencies Required for this Position:
• Computer skills, including knowledge of Internet Explorer, Word, and Excel.
• Experience with precision measuring equipment and industrial power tools.
• Effective communication skills
• Ability to take direction from Lead, Supervisor, or Manager. • Ability to work under pressure and with deadlines. • Strong organizational skills.



Qualifications:
• High School Diploma or GED.
• Previous experience working in a machine shop environment.
• Strong background in Inventory, Receiving, and Dispatch environment.
• Ability to communicate/follow instructions or directions, in English, verbally and in writing.
• Ability to complete all required documentation.
 
Job Location: Tukwila, WA
Start Date: ASAP
Input Date: 11/13/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Material Handler - Level 1

Description:
PDS Tech is seeking a candidate for Material Handler position located in Elk Grove Village, IL.  
Distribution center experience.
Picking and Packaging small electronics items using RF system.
Shipping UPS & Fedex Small Parcels. 
Loads and unloads material within a warehouse or storage facility.
Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility.
May require a high school diploma with 0-2 years of experience in the field or in a related area.
Has knowledge of commonly-used practices, and procedures within a particular field.
Relies on instructions and pre-established guidelines to perform the functions of the job.
Works under immediate supervision.
Primary job functions do not typically require exercising independent judgment.
Typically reports to a supervisor or manager.

Special Considerations:
Lifting is generally at or below 30Lbs. without significant repetitions
. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures.
 
Job Number: 1710064755
Job Location: Elk Grove Village, IL
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021SmEAAU&URLSource=cjhunter

Material Handler - Level 1

Description:
PDS Tech is seeking a candidate for the Material handler Level 1 position located in Reno, NV.  
  • Loads and unloads material within a warehouse or storage facility.
  • Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility.

  • May require a high school diploma with 0-2 years of experience in the field or in a related area.
  • Has knowledge of commonly-used practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision.
  • Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor or manager.
  • Special Considerations:
  • Lifting is generally at or below 30Lbs. without significant repetitions.
  • Moderate exposure to machinery, chemical, biological, and physical risks is anticipated.
  • Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 

** Candidate should possess at least a minimum of 1 year of receiving experience ** 

This position is in general is an order fulfillment center job. General duties would involve receiving, cycle counts, picking, packing, and shipping activities. Preferred qualifications are: 
  • 1+ years of warehousing experience 
  • 1+ years of operating a forklift, reach truck, order picker, walkie rider, or a wave

 
Job Number: 1710064306
Job Location: Reno, NV
Duration: 9 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GM3CAAW&URLSource=cjhunter

Material Handler Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Material Handler - Level 1 position located in Reno, NV. 
  • Loads and unloads material within a warehouse or storage facility.
  • Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility. 
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  •  

Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated. Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
 
  • May require a high school diploma with 0-2 years of experience in the field or in a related area.
  • Has knowledge of commonly-used practices, and procedures within a particular field.
  • Candidate should possess at least a minimum of 1 year of receiving experience
  • 1+ years of warehousing experience 
  • 1+ years of operating a forklift, reach truck, order picker, walkie rider, or a wave

 
Job Number: 1710073864
Job Location: Reno, NV
Duration: 5 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HQHAA2&URLSource=cjhunter

Material Handler Level 1

Description:
PDS Tech, Inc. is seeking a candidate for Material Handler - Level 1 position located in Reno, NV. 
  • Loads and unloads material within a warehouse or storage facility.
  • Utilizes hand trucks, forklifts, hoists, conveyors, or other handling equipment to move material to and from aircraft, trucks or trains and within the storage facility. 
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  •  

Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated. Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
 
  • May require a high school diploma with 0-2 years of experience in the field or in a related area.
  • Has knowledge of commonly-used practices, and procedures within a particular field.
  • Candidate should possess at least a minimum of 1 year of receiving experience
  • 1+ years of warehousing experience 
  • 1+ years of operating a forklift, reach truck, order picker, walkie rider, or a wave

 
Job Number: 1710067297
Job Location: Reno, NV
Duration: 7 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021nsOAAQ&URLSource=cjhunter

Mechanical Design Engineer

Description:
PDS Tech, Inc. is seeking a candidate for the Mechanical Design Engineer position located in Muncie, IN.
  • Designs and develops Engineered to Order fuel control pipe train systems.
  • Applies knowledge of engineering principles to design Engineered to Order products such as pipe train and rack fabrication, etc.
  • Prepare bill of material for assembly, fabrication, application, and/or testing of designed mechanical products. 

  • Bachelor's degree in engineering and 0-2 years of experience with CAD or in a related area.
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • One must possess an attention to detail to ensure a quality design is develop right the first time.
  • Ability to work on multiple projects and with multiple project engineers is also required. 
  • Must Have CAD experience. 

This is custom combustion control equipment designed and built per order for the industrial combustion space. Successful execution of the project will rely on technical knowledge, ability to work in a team environment and successful engagement with the lead project engineer. 

One must be proactive, results oriented, growth and customer focused, and an effective team player. Strong project management and communications skills are necessary when interfacing with multiple people in various departments.
 
Job Number: 1710074682
Job Location: Muncie, IN
Duration: 9 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023JeDAAU&URLSource=cjhunter

Mechanical/HVAC Engineers

Description:
Mechanical/HVAC Engineers- Industrial Background - #1 rated company to work in St. Louis, MO. (Downtown area). 

BSME (PE License preferred) + 7+ years of experience.
• Perform mechanical engineering for industrial HVAC and utility systems on small to large capital projects for our North American pet food manufacturing facilities
• Evaluate feasibility, estimate costs, analysis and designs for existing and new factory sites and buildings on capital projects
• Develop sound construction and purchasing specifications for all aspects of industrial mechanical engineering efforts to support capital projects
•  Work cross-functionally with external consultants to review work, proposed systems, system modifications and equipment installations for code and standards compliance
•  Travel 25-40% to factory locations and construction sites to develop projects, review proposed or completed modifications and/or observe defects
•  Review and approve contractor means and methods for construction at factories in operation
 

 
Job Number: 1710070434
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002349gAAA&URLSource=cjhunter

Nuclear Quality Engineer

Description:
Chipton-Ross is seeking Nuclear Quality Engineer for a contract opening in Rancho Bernardo, CA

RESPONSIBILITIES:
The Nuclear Quality Engineer provides expertise in planning, executing and evaluating complicated commercial grade surveys and quality system audits of nuclear suppliers and internal audits of nuclear processes in accordance with 10CFR50 Appendix B. May perform Quality Management System audits in accordance with ISO 9001:2008. Provides expertise and guidance in interpreting quality standards and government regulations. Works on highly complex and diverse problems where analysis of situations or data requires an evaluation of intangible variance factors.

Performs commercial grade surveys, nuclear supplier audits, and internal company nuclear audits for deficiency identification and correction.
Resolves, communicates and tracks non-conformance and corrective action reports.
Leads resolution to complex and diverse problems by providing guidance and direction to quality engineering and technical staff.
Conducts nuclear supplier qualification examinations.
Determines technical objectives for quality assurance and leads approaches to achieving objectives.
May prepare statistical analysis reports, specifications and other technical documents.
Interprets and adapts quality standards and government regulations.
Acts as company contact with suppliers, customers and regulatory personnel to resolve quality issues.
Delivers technical presentations.
Provides project direction and leadership to other staff members.
Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
Expected to work in a safe manner in accordance with established operating procedures and practices.

REQUIREMENTS:
Must have a demonstrated professional background with advanced specialist knowledge and expertise in more than one technical area.
Must have authoritative knowledge of concepts, principles and methods in fields of specialization along with superior creative ability and exceptional knowledge of quality principles and practices, manufacturing operations, and industrial and regulatory codes.
Must be able to work independently to develop and implement operational programs. Assignments are self-initiated. Work is reviewed for effectiveness in obtaining long-term objectives. Decisions or recommendations may affect the organization's reputation.
Able to work extended hours and travel as required.

EDUCATION:
Typically requires a bachelor's or master's degree in engineering or related discipline and eight or more years of related experience with a bachelor's degree or six or more years with a master's degree. May substitute equivalent experience in lieu of education.

MISCELLANEOUS:
1st shift, 5/40
 
Job Number: 166377
Job Location: Rancho Bernardo, CA
Rate: $48 to $55.00 DOE
Duration: 6 mo
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Emmanuel Morgan
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: emorgan@chiptonross.com
Website: www.chiptonross.com

Parts Analyst I

Description:
PDS Tech, Inc. is seeking a Supply Chain Specialist for an open position in Racine, WI.
Job Description-

  • As the Supply Chain Specialist you will analyze, schedule and control the inventory of parts assets which are supplied Industrial plants, subsidiaries and suppliers by implementing forecasting and ordering guidelines to meet inventory level and percent of fill goals. 

Responsibilities include: 

  • Pro-actively contact supply base to expedite parts deliveries for depot orders to achieve world-class levels of after sales support and customer satisfaction. 
  • Utilize Common Spare Parts System (CSPS) for forecasting, order placement and supplier collaboration activities. 
  • Provide high level of product support and customer satisfaction while optimizing the inventory of the company. 
  • Establish accurate sales forecasts for assigned parts and provision accordingly. 
  • Review and expedite parts to resolve availability and scheduling issues that arise. 
  • Determine priorities with a sense of urgency to provide customer satisfaction with regards to parts shipments. 
  • Communicate to resolve parts shipments in timely manner. 
  • Provide accurate follow up information on parts orders placed on suppliers, subsidiaries, and plants regarding availability. 
  • Control all scheduling and inventory levels of product lines assigned. 
  • Maximize product support levels to dealer organization. 
  • Provide inventory support for Parts Marketing and remanufacturing programs. 
  • Support new product introductions and product upgrade campaigns. 
  • Establish and maintain partnerships with suppliers. 
  • Responsible for $20+ million part inventory. 
  • Responsible for supplier on-time delivery results. 
  • Approve surplus/obsolete inventory reduction candidates. 
  • Work with suppliers to balance cost/benefit of supplier minimum order quantities versus impact to company inventory and cost 

Requirements: 
  • Bachelor's Degree in Supply Chain, Inventory Management, equivalent OR Associates degree plus 3+ years of experience in Material Supply with knowledge of exceptions forecasting, inventory control, order scheduling, or customer service background with knowledge of inventory control systems. 
  • Demonstrated ability to multitask and prioritize workflow in a fast paced environment 


Preferred experience: 

  • Certification in APICS is a plus 
  • Industry Experience 
  • Strong Analytical Skills 
  • Excellent Communication Skills (both verbal and written) 
  • Experience generating reports and performing data analysis with Microsoft Excel 

 
Job Number: 1710069050
Job Location: Sturtevant, WI
Duration: 12 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K0yZAAS&URLSource=cjhunter

Principal Structural Engineer -

Description:
Principal Structural Engineer

PE Required in state of CA

Local Candidates Only - No Relo


Ready to put your engineering expertise designing key oil and gas design projects- Do you enjoy being involved on a wide variety of engineering tasks on multiple, complex structural projects.

Company extensive experience in this field, combined with your advanced engineering knowledge, will move your career forward with opportunity to lead teams. We need our engineers to be versatile, enthusiastic to work in highly flexible, team-oriented environment and who have exceptional communication, analytical and leadership skills.

In this role you will design a variety of structures by applying advanced construction/engineering techniques and analysis. You will inspect site conditions to ensure suitability for the designed permanent works.


Give advice on constructed matters. Observe site safety procedures. You may be asked to inspect construction, including temporary works to ensure compliance with approved methods and contract requirements. Maintain records of inspections, work executed, etc.

RESPONSIBILITIES:

Working on construction site, assists Resident Engineer with implementing structural engineering practices and related standards.
Structural engineering systems subject matter expert
Develops and implements QA procedures to ensure quality control performed by others is properly implemented throughout the program and assigned projects.
Reviews standards for materials and equipment to ensure they are in accordance with the specifications and LEED sustainability plan.
Performs constructability, buildability, and maintainability reviews, especially as related to structural systems.
Reviews shop drawing and construction-phase submittals when issues arise that require specific technical assistance.
Provides input regarding all energy efficiency and performance standards.
Reviews design drawings and specifications at periodic check points as required by the PMP milestones.
Participates in value engineering and scope and budget reconciliation when required or requested.
Writes detailed reports related to structural engineering of projects and confers with project and program managers as requested.
Supports the needs of other discipline leads for input to their efforts.
Makes site trips to collect structural engineering related data and construction contractor performance.
Qualifications - External Qualifications:

10 to 12 years of structural engineering design experience with concrete and steel design experience in heavy industrial and oil/gas required
Bachelors degree in Civil engineering, with structural concentration
Professional Engineer registration REQUIRED
Proficiency in utilizing CAD and PC software engineering packages
Must meet customer security requirements and complete a background check by federal authorities
 
Job Number: 361461
Job Location: Bakersfield, CA
Rate: $62hr
Per Diem: no
Duration: temp to hire
Start Date: asap
Input Date: 12/15/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Email: rmartinsen@jsginc.com
Website: www.jsginc.com

Procurement Agent 3

Description:
Chipton-Ross is seeking a Procurement Agent 3 located in Bingen, WA

RESPONSIBILITIES:

Conducts risk, issues and opportunities evaluation to assess supplier quality, financial stability and performance for complex supplier transactions to include standard/non standard materials and services. Integrates program/customer requirements into source selection, negotiation and contracting strategies. Develops requests for quotes and sources equipment, materials and services. Compiles information on price trends. Reviews proposals and selects or recommends suppliers. Evaluates terms and conditions and flow down clauses to determine compliance. Prepares supplier contracts and required documents. Negotiates pricing and contract terms and conditions. Prepares and executes negotiated contractual documents and other binding agreements. Monitors supplier/subcontractor schedule, quality, delivery and financial performance. Mitigates risks and initiates supplier improvement actions. Follows up on orders placed, verifies delivery, and maintains documentation.
oComplete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
oDevelops solutions to a variety of complex problems. May refer to established precedents and policies.
oWork is performed under general direction. Participates in determining objectives of assignment. Plans schedules and arranges own activities in accomplishing objectives. Work is reviewed upon completion for adequacy in meeting objectives.
oExerts some influence on the overall objectives and long-range goals of the organization. Erroneous decisions or failure to achieve objectives would normally have a serious effect upon the administration of the organization.
oRepresents organization as a prime contact on contracts or projects. Interacts with senior internal and external personnel on significant matters often requiring coordination between organizations.

Qualifications

KEY SKILLS & ABILITIES
oAbility to collect, organize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
oDevelops and uses collaborative relationships to facilitate the accomplishment of work goals.
oUnderstands and utilizes economic, financial, and industrial data to accurately diagnose business strengths and weaknesses, identifying key issues, and developing strategies and plans.
oClearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.
oEffectively explores alternatives and positions to reach outcomes that gain the support and acceptance of all parties.
oKnowledge of the procurement process used at company sites in order to track procurement obligations such as, schedule compliance, quantity and past performance. Overall knowledge of processes used in procurement activities such as supplier selection, identification of requirements bid list development, supplier/subtler management and supplier recommendations for goods and services.
oKnowledge of government/company, procedures and regulations (e.g., estimating system manual, FAR, DFAR, TINA, ITAR, Procurement integrity, Export Compliance) relating to the development of cost proposals. Knowledge of proposal, accounting, and rate development (common systems). Knowledge of audit, fact-finding, and negotiation processes (e.g., self audit, internal audit, government audit, effective negotiation) and how they affect the proposal process.
oKnowledge of strategic sourcing objectives including supply base optimization, enterprise leveraging, supplier performance improvement and business considerations to develop the company's supplier base.
oKnowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the company companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools.
oApply knowledge of suppliers' abilities (e.g., production, technical, service, design), management (e.g., organization structure, processes, risks, capacity, past performance), and products used in procurement activities (e.g., supplier selection, bid list development, supplier management).

EDUCATION:
6-9 years with Bachelor's degree or 4-7 years with Master's degree

Experience with hardware commodities and expediting

WORK HOURS:
Full-Time

 
Job Number: 166172
Job Location: Bingen, WA
Rate: $28 to $34.00 DOE
Duration: 6 MONTHS
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Christine Gibbons
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cgibbons@chiptonross.com
Website: www.chiptonross.com

Procurement Agent 3 - WA

Description:
Chipton-Ross is seeking a Procurement Agent 3 for an opening in Bingen/Vancouver, WA.

RESPONSIBILITIES:
Conducts risk, issues and opportunities evaluation to assess supplier quality, financial stability and performance for complex supplier transactions to include standard/non standard materials and services. Integrates program/customer requirements into source selection, negotiation and contracting strategies. Develops requests for quotes and sources equipment, materials and services. Compiles information on price trends. Reviews proposals and selects or recommends suppliers. Evaluates terms and conditions and flow down clauses to determine compliance. Prepares supplier contracts and required documents. Negotiates pricing and contract terms and conditions. Prepares and executes negotiated contractual documents and other binding agreements. Monitors supplier/subcontractor schedule, quality, delivery and financial performance. Mitigates risks and initiates supplier improvement actions. Follows up on orders placed, verifies delivery, and maintains documentation.
Complete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
Develops solutions to a variety of complex problems. May refer to established precedents and policies.
Work is performed under general direction. Participates in determining objectives of assignment. Plans schedules and arranges own activities in accomplishing objectives. Work is reviewed upon completion for adequacy in meeting objectives.
Exerts some influence on the overall objectives and long-range goals of the organization. Erroneous decisions or failure to achieve objectives would normally have a serious effect upon the administration of the organization.
Represents organization as a prime contact on contracts or projects. Interacts with senior internal and external personnel on significant matters often requiring coordination between organizations.

ADDITIONAL EXPERIENCE:
Ability to collect, organize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
Develops and uses collaborative relationships to facilitate the accomplishment of work goals.
Understands and utilizes economic, financial, and industrial data to accurately diagnose business strengths and weaknesses, identifying key issues, and developing strategies and plans.
Clearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.
Effectively explores alternatives and positions to reach outcomes that gain the support and acceptance of all parties.
Knowledge of the procurement process used at company sites in order to track procurement obligations such as, schedule compliance, quantity and past performance. Overall knowledge of processes used in procurement activities such as supplier selection, identification of requirements bid list development, supplier/subtler management and supplier recommendations for goods and services.
Knowledge of government/company, procedures and regulations (e.g., estimating system manual, FAR, DFAR, TINA, ITAR, Procurement integrity, Export Compliance) relating to the development of cost proposals. Knowledge of proposal, accounting, and rate development (common systems). Knowledge of audit, fact-finding, and negotiation processes (e.g., self audit, internal audit, government audit, effective negotiation) and how they affect the proposal process.
Knowledge of strategic sourcing objectives including supply base optimization, enterprise leveraging, supplier performance improvement and business considerations to develop the company's supplier base.
Knowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the company companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools.
Apply knowledge of suppliers' abilities (e.g., production, technical, service, design), management (e.g., organization structure, processes, risks, capacity, past performance), and products used in procurement activities (e.g., supplier selection, bid list development, supplier management).

NOTE: Selected candidate will split time between Bingen, WA and Vancouver, WA.

EDUCATION:
6-9 years with Accredited Bachelor's degree or 4-7 years with Accredited Master's degree.

WORK HOURS: FULL TIME/9-80 WORK WEEK

 
Job Number: 165776
Job Location: Bingen/Vancouver, WA
Rate: $22 to $28.00 DOE
Duration: 6 Months
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: Patricia Padilla
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ppadilla@chiptonross.com
Website: www.chiptonross.com

Procurement Agent 3 - WA

Description:
Chipton-Ross is seeking a Procurement Agent 3 for an opening in Bingen,WA.

RESPONSIBILITIES:
Conducts risk, issues and opportunities evaluation to assess supplier quality, financial stability and performance for complex supplier transactions to include standard/non standard materials and services. Integrates program/customer requirements into source selection, negotiation and contracting strategies. Develops requests for quotes and sources equipment, materials and services. Compiles information on price trends. Reviews proposals and selects or recommends suppliers. Evaluates terms and conditions and flow down clauses to determine compliance. Prepares supplier contracts and required documents. Negotiates pricing and contract terms and conditions. Prepares and executes negotiated contractual documents and other binding agreements. Monitors supplier/subcontractor schedule, quality, delivery and financial performance. Mitigates risks and initiates supplier improvement actions. Follows up on orders placed, verifies delivery, and maintains documentation.
Complete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
Develops solutions to a variety of complex problems. May refer to established precedents and policies.
Work is performed under general direction. Participates in determining objectives of assignment. Plans schedules and arranges own activities in accomplishing objectives. Work is reviewed upon completion for adequacy in meeting objectives.
Exerts some influence on the overall objectives and long-range goals of the organization. Erroneous decisions or failure to achieve objectives would normally have a serious effect upon the administration of the organization.
Represents organization as a prime contact on contracts or projects. Interacts with senior internal and external personnel on significant matters often requiring coordination between organizations.

ADDITIONAL EXPERIENCE:
Ability to collect, organize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
Develops and uses collaborative relationships to facilitate the accomplishment of work goals.
Understands and utilizes economic, financial, and industrial data to accurately diagnose business strengths and weaknesses, identifying key issues, and developing strategies and plans.
Clearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.
Effectively explores alternatives and positions to reach outcomes that gain the support and acceptance of all parties.
Knowledge of the procurement process used at company sites in order to track procurement obligations such as, schedule compliance, quantity and past performance. Overall knowledge of processes used in procurement activities such as supplier selection, identification of requirements bid list development, supplier/subtler management and supplier recommendations for goods and services.
Knowledge of government/company, procedures and regulations (e.g., estimating system manual, FAR, DFAR, TINA, ITAR, Procurement integrity, Export Compliance) relating to the development of cost proposals. Knowledge of proposal, accounting, and rate development (common systems). Knowledge of audit, fact-finding, and negotiation processes (e.g., self audit, internal audit, government audit, effective negotiation) and how they affect the proposal process.
Knowledge of strategic sourcing objectives including supply base optimization, enterprise leveraging, supplier performance improvement and business considerations to develop the company's supplier base.
Knowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the company companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools.
Apply knowledge of suppliers' abilities (e.g., production, technical, service, design), management (e.g., organization structure, processes, risks, capacity, past performance), and products used in procurement activities (e.g., supplier selection, bid list development, supplier management).

EDUCATION:
6-9 years with Accredited Bachelor's degree or 4-7 years with Accredited Master's degree.

WORK HOURS: FULL TIME/9-80 WORK WEEK

 
Job Number: 165500
Job Location: Bingen, WA
Rate: $DOE
Duration: 6 Months
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: LaVada Pulley
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lpulley@chiptonross.com
Website: www.chiptonross.com

Procurement Agent 3 Contractor - WA

Description:
Chipton-Ross is seeking a Procurement Agent 3 Contractor located in Vancouver, WA.

RESPONSIBILITIES:
Conducts risk, issues and opportunities evaluation to assess supplier quality, financial stability and performance for complex supplier transactions to include standard/non standard materials and services. Integrates program/customer requirements into source selection, negotiation and contracting strategies. Develops requests for quotes and sources equipment, materials and services. Compiles information on price trends. Reviews proposals and selects or recommends suppliers. Evaluates terms and conditions and flow down clauses to determine compliance. Prepares supplier contracts and required documents. Negotiates pricing and contract terms and conditions. Prepares and executes negotiated contractual documents and other binding agreements. Monitors supplier/subcontractor schedule, quality, delivery and financial performance. Mitigates risks and initiates supplier improvement actions. Follows up on orders placed, verifies delivery, and maintains documentation.
oComplete understanding and application of principles, concepts, practices, and standards. Full knowledge of industry practices.
oDevelops solutions to a variety of complex problems. May refer to established precedents and policies.
oWork is performed under general direction. Participates in determining objectives of assignment. Plans schedules and arranges own activities in accomplishing objectives. Work is reviewed upon completion for adequacy in meeting objectives.
oExerts some influence on the overall objectives and long-range goals of the organization. Erroneous decisions or failure to achieve objectives would normally have a serious effect upon the administration of the organization.
oRepresents organization as a prime contact on contracts or projects. Interacts with senior internal and external personnel on significant matters often requiring coordination between organizations.

REQUIRED EXPERIENCE:
KEY SKILLS & ABILITIES
oAbility to collect, organize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources.
oDevelops and uses collaborative relationships to facilitate the accomplishment of work goals.
oUnderstands and utilizes economic, financial, and industrial data to accurately diagnose business strengths and weaknesses, identifying key issues, and developing strategies and plans.
oClearly conveys information and ideas through a variety of media to individuals or groups in a manner that engages the audience and helps them understand and retain the message.
oEffectively explores alternatives and positions to reach outcomes that gain the support and acceptance of all parties.
oKnowledge of the procurement process used at company sites in order to track procurement obligations such as, schedule compliance, quantity and past performance. Overall knowledge of processes used in procurement activities such as supplier selection, identification of requirements bid list development, supplier/subtler management and supplier recommendations for goods and services.
oKnowledge of government/company, procedures and regulations (e.g., estimating system manual, FAR, DFAR, TINA, ITAR, Procurement integrity, Export Compliance) relating to the development of cost proposals. Knowledge of proposal, accounting, and rate development (common systems). Knowledge of audit, fact-finding, and negotiation processes (e.g., self audit, internal audit, government audit, effective negotiation) and how they affect the proposal process.
oKnowledge of strategic sourcing objectives including supply base optimization, enterprise leveraging, supplier performance improvement and business considerations to develop the company's supplier base.
oKnowledge of supplier assessment processes including Preferred Supplier Certification and Work Transfer Process. Elements of assessment to include supplier's past performance, business processes, capacity plan, statement of work evaluation, risk mitigation plan, capabilities and lean practices in order to rate supplier viability to support the company companies goals and objectives. Ability to control and deliver project deliverables, project accounting and appraisal, and optimize the contribution of the people involved using project management tools.
oApply knowledge of suppliers' abilities (e.g., production, technical, service, design), management (e.g., organization structure, processes, risks, capacity, past performance), and products used in procurement activities (e.g., supplier selection, bid list development, supplier management).

EDUCATION:
6-9 years with Bachelor's degree or 4-7 years with Master's degree

Experience with software and service commodities

WORK HOURS:
Full-Time
9/80 work week

 
Job Number: 165775
Job Location: Vancouver, WA
Rate: $22 to $28.00 DOE
Duration: 6 MONTHS
Input Date: 12/15/2017
Firm Name: CHIPTON ROSS
Attention: LaVada Pulley
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lpulley@chiptonross.com
Website: www.chiptonross.com

Production Control Asst-VA-C

Description:
Chipton-Ross is seeking a Production Control Asst in MANASSAS, VA.

Description
Maintains schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control. Compiles records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production. Expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules. Assists in determining possible and actual shortages may initiate action to correct these deficiencies. Uses knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action. Estimates and logs production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates. Typical Tasks: Independently performs non-routine and moderately complex assignments. Researches assignments, processes, and analyzes data and may develop recommendations. Competently uses computers and other systems to access, maintain, manipulate data. May provide leadership, direction to lower level employees. In technical or production positions, may determine methods, operations, sequences; develops and/or modifies products and equipment to requirements.

Skill/Experience/Education
Mandatory:
High School diploma, or equivalent experience/combined education, with additional specialized training in specific aspects of job functions and/or demonstrated ability to perform assigned tasks and 3 Years of experience. Knowledge/experience with Solumina, SAP, P2P, or related tools.

WORK HOURS:
Full-Time/First Shift
9/80

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 166388
Job Location: MANASSAS, VA
Rate: $22 to $30.00 DOE
Duration: 12 months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

Production Controller - 1

Description:
PDS Tech, Inc. is seeking a Production Controller in San Diego, CA.  

Position Summary/Responsibilities:

  • Maintains schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control.
  • Compiles records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production.
  • Expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules.
  • Assists in determining possible and actual shortages may initiate action to correct these deficiencies.
  • Uses knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action.
  • Estimates and logs production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Leveling Factors:
Knowledge

Little or no knowledge of the job. Moderate understanding of general job aspects and some understanding of the detailed aspects of the job.

Supervision Given and Received

Immediate Close supervision involving detailed verbal and written instructions. Frequent review of work performance.

Typical Duties and Tasks

Duties & tasks are simple and repetitive. Assists more senior staff members with routine tasks. Refers questions and problems to higher levels.

Consequence of Errors

Errors can be easily and quickly detected within the immediate work unit and would result only in minor disruption or expense to correct.

Contacts

Contacts are primarily within immediate work unit. Contacts involve obtaining or providing information requiring little explanation or interpretation.

 
 
  • High School diploma or equivalent 
  • Ability to obtain a DOD Secret Clearance

 
Job Number: 1710072660
Job Location: San Diego, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Jordan
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023CI7AAM&URLSource=cjhunter

Production Controller - 1- Secret Clearance

Description:
PDS Tech, Inc. is seeking a candidate for the Production Controller - 1- Secret Clearance position located in San Diego, CA. 

Position Summary / Responsibilities

Maintains schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control. Compiles records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production. Expedites flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules. Assists in determining possible and actual shortages may initiate action to correct these deficiencies. Uses knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action. Estimates and logs production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Leveling Factors:
Knowledge
Little or no knowledge of the job. Moderate understanding of general job aspects and some understanding of the detailed aspects of the job.
Supervision Given and Received
Immediate Close supervision involving detailed verbal and written instructions. Frequent review of work performance.
Typical Duties and Tasks
Duties & tasks are simple and repetitive. Assists more senior staff members with routine tasks. Refers questions and problems to higher levels.
Consequence of Errors
Errors can be easily and quickly detected within the immediate work unit and would result only in minor disruption or expense to correct.
Contacts
Contacts are primarily within immediate work unit. Contacts involve obtaining or providing information requiring little explanation or interpretation.
 
Qualifications:
Basic Qualifications:

Preferred Qualifications:
Typical Education / Experience
For all non-exempt level 1 and college intern positions: High School diploma or equivalent and 0 years experience. For all High School intern positions: Must be enrolled in a high school program in pursuit of a high school diploma or equivalent and 0 years experience.
 
 
Job Number: 1710070664
Job Location: San Diego, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: DJ Englert
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000235BuAAI&URLSource=cjhunter

Production Coordinator A

Description:
PDS Tech is seeking a Production Coordinator for an open position in Jacksonville, FL.
In your role you will:

  • Assist with processing and movement of production and other materials into and out of storage, production and other locations to support the flow of production following standard work instructions.
  • Assist in monitoring work in process.
  • Post updates to automated systems to insure parts availability.
  • Identify problems or discrepancies with parts and materials.
  • Assist within the work group to expedite and complete production activities to avoid schedule delays.
  • May be working in variable work conditions and may need to operate industrial trucks and/or forklifts.
  • Work under minimum supervision and with other support and operations personnel.

As our ideal candidate, you will meet the following requirements:
  • High school diploma or GED.
  • Must be Safety minded, customer service support oriented and able to communicate well both written and verbally.
  • Computer skills desired.
  • Must be detailed oriented, efficient and able to work in a face paced environment.
  • Interim level security clearance required.
  • Must be a U.S. citizen.

 
Job Number: 1710076943
Job Location: Jacksonville, FL
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023ObYAAU&URLSource=cjhunter

Production Worker

Description:
PDS Tech, Inc. is seeking a Production Worker for an open position in Danville, KY.
  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications.
  • Identifies units that fail tests or tolerance levels and repairs as necessary. 

  • Requires a high school diploma or its equivalent.
  • May be required to complete an apprenticeship and/or formal training in area of specialty.
  • May require 0-2 years of experience in the field or in a related area.
  • Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
  • Relies on instructions and pre-established guidelines to perform the functions of the job.
  • Works under immediate supervision.
  • Primary job functions do not typically require exercising independent judgment.
  • Typically reports to a supervisor or manager. 

Basic Qualifications: 
-Basic Math and Measuring skills 
-High School Diploma/GED required 
-Familiar with blueprint reading 
-Verbal and Written Communication 
-Understanding of Material Data Sheets 
-Ability to operate cranes 
-Working with small hand tools

Special Considerations: 
 Lifting is generally at 50Lbs. with significant repetitions. Moderate exposure to machinery, and physical risks is anticipated. Operation of a crane is considered at least Industrial and may be considered Heavy as determined by other exposures.May be required to perform other duties as requested, directed or assigned. 
 
 
Job Number: 1710067198
Job Location: Danville, KY
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021nEhAAI&URLSource=cjhunter

Production Worker

Description:
PDS Tech is seeking a candidate for the Production Worker position located in Geneva, OH.  
Performs all tasks associated with the assembly of Elster Perfection products, while following written and verbal work instructions, routings and blueprints. Each operator is responsible for working in a safe and efficient manner as prescribed by company policy, as well as meeting productivity requirements for each job performed and producing quality products. 

MAJOR FUNCTIONS AND RESPONSIBILITIES: 

• Perform all aspects of production related to Elster Perfection products while meeting productivity requirements for each job. Utilize existing and new equipment, machinery and processes necessary to complete the production of Elster Perfection products in a safe and efficient manner. Packaging of finished goods for the assigned workstation. 

• Read and follow routings and drawings and perform work as assigned by the production supervisor. 

• Locate, transport, store, stage, and deliver all types of materials related to the manufacturing process from raw goods to finished goods as required by production schedules or supervisors. 

• Perform all set-ups, minor adjustments to machines and minor maintenance of assigned workstation. 

• Check the prepared shop packet for correctness of materials, assembly tools, and gages before and during each manufacturing operation. 

• Perform visual inspections of manufactured products in accordance with Quality standards. 

• Accurate reporting of shop floor data related to production and quality, both manually and electronically. Communication of in process items with employees on other shifts. 

• Report safety issues and work related accidents as they arise to the Supervisor. 

• Maintain a clean and safe work environment. Each operator is responsible for housekeeping within his or her assigned workstations, including the removal of waste and scrap on a daily basis. 

• Perform other related duties as assigned by management. 


 
• A high school diploma (or GED equivalent), the ability to read, write, understand basic math, basic computer skills and follow written and verbal instruction are required. 



• 1-2 years of experience in an industrial setting is preferred. 



• Must have the ability to interpret production documents that may include drawings, bills of material, routings, pick lists and manufacturing orders
 
Job Number: 1710062888
Job Location: Geneva, OH
Duration: 9 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Janelie Pizzetulla
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G94bAAC&URLSource=cjhunter

Production Worker

Description:
PDS Tech is seeking a candidate for the Production Worker position located in Geneva, OH.  
Performs all tasks associated with the assembly of Elster Perfection products, while following written and verbal work instructions, routings and blueprints. Each operator is responsible for working in a safe and efficient manner as prescribed by company policy, as well as meeting productivity requirements for each job performed and producing quality products. 

MAJOR FUNCTIONS AND RESPONSIBILITIES: 

• Perform all aspects of production related to Elster Perfection products while meeting productivity requirements for each job. Utilize existing and new equipment, machinery and processes necessary to complete the production of Elster Perfection products in a safe and efficient manner. Packaging of finished goods for the assigned workstation. 

• Read and follow routings and drawings and perform work as assigned by the production supervisor. 

• Locate, transport, store, stage, and deliver all types of materials related to the manufacturing process from raw goods to finished goods as required by production schedules or supervisors. 

• Perform all set-ups, minor adjustments to machines and minor maintenance of assigned workstation. 

• Check the prepared shop packet for correctness of materials, assembly tools, and gages before and during each manufacturing operation. 

• Perform visual inspections of manufactured products in accordance with Quality standards. 

• Accurate reporting of shop floor data related to production and quality, both manually and electronically. Communication of in process items with employees on other shifts. 

• Report safety issues and work related accidents as they arise to the Supervisor. 

• Maintain a clean and safe work environment. Each operator is responsible for housekeeping within his or her assigned workstations, including the removal of waste and scrap on a daily basis. 

• Perform other related duties as assigned by management. 


 
OTHER FUNCTIONS: 
• Responsible to report safety issues and work related accidents as they arise to the Supervisor. 

• Objectives and measures of the EH&S system are to be understood as follows: prevent pollution, injuries and hazards, to continual improve, and to follow legal requirements. 

• Perform normal daily maintenance that may require and include cleaning, greasing, lubricating. 

• Employees with specialized training or certifications may be required to perform specific aspects of production as assigned by the Supervisor. 


EDUCATION AND EXPERIENCE REQUIREMENTS: 

• A high school diploma (or GED equivalent), the ability to read, write, understand basic math, basic computer skills and follow written and verbal instruction are required. 

• 1-2 years of experience in an industrial setting is preferred. 

• Must have the ability to interpret production documents that may include drawings, bills of material, routings, pick lists and manufacturing orders
 
Job Number: 1710062685
Job Location: Geneva, OH
Duration: 9 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G8VyAAK&URLSource=cjhunter

Production Worker, Hourly

Description:
PDS Tech is seeking a candidate for the Production Worker position located in Geneva, OH.  
Performs all tasks associated with the assembly of Elster Perfection products, while following written and verbal work instructions, routings and blueprints. Each operator is responsible for working in a safe and efficient manner as prescribed by company policy, as well as meeting productivity requirements for each job performed and producing quality products. 

MAJOR FUNCTIONS AND RESPONSIBILITIES: 

• Perform all aspects of production related to Elster Perfection products while meeting productivity requirements for each job. Utilize existing and new equipment, machinery and processes necessary to complete the production of Elster Perfection products in a safe and efficient manner. Packaging of finished goods for the assigned workstation. 

• Read and follow routings and drawings and perform work as assigned by the production supervisor. 

• Locate, transport, store, stage, and deliver all types of materials related to the manufacturing process from raw goods to finished goods as required by production schedules or supervisors. 

• Perform all set-ups, minor adjustments to machines and minor maintenance of assigned workstation. 

• Check the prepared shop packet for correctness of materials, assembly tools, and gages before and during each manufacturing operation. 

• Perform visual inspections of manufactured products in accordance with Quality standards. 

• Accurate reporting of shop floor data related to production and quality, both manually and electronically. Communication of in process items with employees on other shifts. 

• Report safety issues and work related accidents as they arise to the Supervisor. 

• Maintain a clean and safe work environment. Each operator is responsible for housekeeping within his or her assigned workstations, including the removal of waste and scrap on a daily basis. 

• Perform other related duties as assigned by management. 


 
• A high school diploma (or GED equivalent), the ability to read, write, understand basic math, basic computer skills and follow written and verbal instruction are required. 



• 1-2 years of experience in an industrial setting is preferred. 



• Must have the ability to interpret production documents that may include drawings, bills of material, routings, pick lists and manufacturing orders
 
Job Number: 1710064331
Job Location: Geneva, OH
Duration: 9 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Lea Salmo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GMAFAA4&URLSource=cjhunter

Programming-Numerical Ctl 3 (3) - TN

Description:
Chipton-Ross is seeking a Programming-Numerical Ctl 3 (3) for an opening in Nashville, TN.

Client designs, engineers, manufactures, repairs and overhauls a broad portfolio of aviation and industrial components, accessories, subassemblies, systems and aircraft structures. We partner with original equipment manufacturers (OEMs) and operators of commercial, regional, business and military aircraft worldwide, to provide products and services that solve their hardest problems. So whatever the part, component or complexity of assembly, Client is committed to quality, service and meeting the specialized needs of each customer.

Client participates at all levels of the aerospace supply chain - from single components, to complex systems, to aerospace structures and their contents. We provide solutions for the entire product life cycle of an aircraft - from raw material to aftermarket service. Our unique ability to integrate a broad range of products and capabilities is our competitive advantage.
Develops and writes programs for numerically controlled machines using engineering specifications and drawings.

RESPONSIBILITIES:
Analyzes engineering drawings to define configuration of parts and determine type and sequence of machine operations. Develops programs for machining parts, tools, or sheet metal on numerically controlled machine tools. Makes proper cutter selections for each part, taking into consideration such factors as speeds, types of cutters, feeds, and control system limitations. Selects program routines for the most efficient computer calculation of dimensional and machining requirements for each part. Tests and modifies existing parts programs for engineering changes or program improvements. Excludes CNC Machine Operators.

REQUIRED EXPERIENCE:
10 Years NC programming experience in Long Bed machining and Auto riveting applications, CATIA V5.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time

 
Job Number: 166186
Job Location: Nashville, TN
Rate: $DOE
Duration: 6 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

Project Cost Estimator

Description:
PDS is looking for a Project Cost Estimator - Please email resumes to: mmccarthy@pdstech.com or phone: (314) 720-0572 Mary Ann McCarthy
This position is located in the St. Louis area and would prefer local candidates. Must have 10+ years of experience.  Would consider degree and non-degreed candidates.  Multiple Industrial Projects experience a plus.   *Working with Estimating Equipment *Industrial Experience, Food & Beverage or Pharmaceutical a plus.
Primavera experience a must.
**This job is with the highest rated company in St. Louis, MO.  
  Must have the following experience:   *  Project Cost Estimation *  Construction Projects *  Experience Industrial Scale Projects *  Food Background a plus - but not needed *  Involved with Manufacturing Plants  
This position may require you to submit to and pass a drug test and/or background check. If this is a hands-on position, you may also be required to pass a safety and productivity examination.   PDS Tech, Inc. will comply with all applicable federal and state laws governing the use of such background checks and drug tests   PDS Tech, Inc. is proud to be an Equal Opportunity Employer - Minorities/Female/Disabled/Veteran (EOE M/F/D/V)   Founded in 1977, PDS Tech, Inc. is one of the nation's premier specialty staffing firms with 31 offices nationwide.  We offer a full range of benefits including: - Health insurance - Paid holidays - Weekly payroll - Immediate 401(k) eligibility - Completion bonuses - Training Please note availability of benefits may vary by position.   PDS specializes in Engineering and IT arenas including Aerospace, Defense, Electronics, Telecommunications, Automotive, and Energy just to name a few.  Our reputation, track record, and years of continuous growth reflect the commitment to quality that our employees and clients experience first-hand.   $$$ PDS pays for referrals! $$$ We pay thousands each month in referral bonuses!Contact a recruiter for details.
 
Job Number: 1710063644
Job Location: Saint Louis, MO
Per Diem: No
Duration: 0 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBaNAAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
12+ months contract
Englewood, CO

Job Summary

Responsible for all Engineering aspects of the implementation of assigned projects. Coordinates engineering projects in terms of budget, schedule, performance and certification requirements. A leader in the organization with important influence on all technical. Aids in ensuring adherence to contracts, system or product specifications, FAA and Quality standards. Follows and improves processes and ensures team discipline and adherence. A key member of the technical staff, this position is highly influential in the development and direction of the organization. As such, the position should bring new ideas to work. Contribution on a personal or individual level as well as the leadership role is required.

Supervisory Responsibilities

This is a lead engineering role, and the candidate is responsible for serving as a team leader. This position has no direct supervisory responsibilities such as hiring, firing, and compensation plan development...

Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.

Education & Experience
•Bachelor’s degree (BS) in Mechanical, Aeronautical, Aerospace or related engineering field from four-year college or university; and seven to ten years’ related industry experience and/or training; or equivalent combination of education and experience.
•Professional Engineer and/or Master’s degree (M.A.) in Mechanical, Aeronautical, Aerospace or related engineering field preferred
•7-10 years project/program management experience
•7-10 years previous experience in project management, design, analysis and certification of aircraft systems working with engineering staffs of military and civilian aircraft manufacturers
•Analysis, design and development experience in aviation field preferred
•Strong knowledge and understanding of design process and manufacturing processes

Skills
•Strong business acumen with the ability to understand business situations, strategies, theory, processes, management, budgeting and operations
•Ability to multi-task efficiently, works in a fast paced environment on multiple projects, and has a strong attention for detail
•Excellent written and verbal communication skills
•Ability to be a team player with a professional attitude
•Strong interpersonal skills and a high degree of collaboration at all levels

Computer Skills
•Experience with CAD software (Solid works /Auto Cad preferred)
•Proficient with Microsoft Suite, including Word, Excel, PowerPoint and Outlook
 
Job Number: 52702
Job Location: Englewood, CO
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Project Engineer / Technician

Description:
PDS TECH is looking for a Project Engineer / Technician for our client outside of Buffalo, NY
This is a special assignment in support of a lean initiative in the Space and Defense group.
Working under the general direction of the Contamination Engineering Section head, work as a team member with other Sr. Product Engineering technicians, to populate an electronic database of cleaning and packaging instructions. Interface with Methods and Product Engineering functions to ensure process directions are correctly identified on various operator work instructions. 

The incumbent should have proven ability to interpret drawing notes for special processes, finishes, edge breaks, materials. 
Ability to interpret manufacturing process steps to create the proper cleaning and packaging requirements. 
Familiarity with precision components cleaned and packaged for assembly and testing in an ISO class 7 cleanroom atmosphere 

This position requires the equivalent of a two year Associate Engineering Certificate and a minimum of three years Production of Prototype Test Technician experience. Experience in a methods engineering role is a plus.

The incumbent should have proven ability to interpret drawing notes for special processes, finishes, edge breaks, materials. 

Ability to interpret manufacturing process steps to create the proper cleaning and packaging requirements. 

Familiarity with precision components cleaned and packaged for assembly and testing in an ISO class 7 cleanroom atmosphere

 

A Bachelors degree in computer science or software engineering or electrical engineering or equivalent experience is required.

Please share resumes at nraina@pdstech.com
Looking for mechanical drawing, understand materials, end break, surfaces. 

This person will work with 2 other employees. 

If candidate has experience with method engineering or industrial engineering that is a plus. 

Will use MBS system 

Will need to be able to upload directions into a new database.
 
Job Number: 1710072340
Job Location: East Aurora, NY
Per Diem: Yes
Duration: 5 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Natasha Raina
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023Ab3AAE&URLSource=cjhunter

Project/Change Management

Description:
Change/Project Management - #1 rated company to work in St. Louis, MO. (Downtown area). 
Must have experience with the following:

Risk Analysis /Manufacturing Processes/Business Analyst

**Prefer Industrial Engineering Degree 
  • Experience and knowledge of change management principles and methodologies
  • Familiarity with project management approaches, tools and phases of the project lifecycle
  • Familiarity of manufacturing processes
  • Up to 60% travel required
  • The position will play a key role in helping capital projects meet business, schedule and budget objectives.  This position will focus on the operational, non-construction elements of a project, including methods, materials, man and machine.


 
Job Number: 1710069120
Job Location: Saint Louis, MO
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K1QQAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
The Quality Engineer plans and directs activities concerned with development, application and maintenance of quality standards for industrial processes, materials and products by performing the following duties.

Job Responsibilities:
• The Quality Engineer performs professional Quality Engineering assignments of a basic degree of complexity under direction and supervision with limited latitude for independent action and decision.
• Work involves the application of basic engineering principles to develop methods and procedures to improve and maintain product quality standards.
• Assignments include the design of systems of recording and analyzing product quality level; the development of quality control inspection requirements and techniques, and the interpretation of product quality trends.
• May prepare plans, specifications and cost estimates for assignments of moderate difficulty where technical supervision provides an outline of tasks to be performed and suggestions as to methods of approach and procedures to be followed.
• Conducts analysis of tests of a routine degree of complexity and provides recommendations accordingly.
• May assign work to inspectors and technicians.
• Performs other related duties as required.

Minimum Requirements:
• Bachelor's degree (B.A.) from four-year college or university; and one to two years related experience and/or training; or equivalent combination of education and experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

RS Acft Tech Trainee

Description:
PDS Tech is seeking an RS Acft Tech Trainee for an open position in Savannah, GA.

Knowledge and use of basic hand tools, interpret and understand aircraft maintenance manuals, technical orders to assist senior technicians in the inspection and repair of customer aircraft. Strong mechanical aptitude. Must be able to work any shift.

Position Purpose:
Under direct supervision of the Mechanical Team Lead or Senior Tech, assist with the inspection, maintenance and repair of customer aircraft. In this position, the employee will gain knowledge of and familiarity with the  aircraft, with internal procedures for work completion and quality control, and with the ways in which multiple shops must work together to meet production goals. 

Principal Duties and Responsibilities:

Essential Functions:
 Goals of the Aircraft Tech Trainee are to gain experience in the inspection and maintenance of various  aircraft systems (airframe structural, electrical, hydraulic, fuel, landing gear, flight controls and rigging, engines, conditioned air, anti-ice, and other sub-systems). Make effective use of technical reference resources (maintenance and repair manuals, wiring diagrams, vendors and manufacturer communiques, etc.) as required to identify correct part numbers, procedures, and materials. Learn to find information. 2. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete parts change sheets, work order sign-offs, shift turn-overs, and other paper work in a timely manner. 3. Ensure that work accomplished meets FAA requirements, customer specifications, and  standard of quality. 4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely. Prevent damage to aircraft. 5. Correctly and safely operate ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.). 6. Assist Line Service with the movement and servicing of aircraft. Ensure that parts racks and cages remain near their respective aircraft. 

Other Requirements: 1. Strong mechanical aptitude. 2. Enrollment in an Airframe & Powerplant license program preferred. 3. Essential communication skills include the ability to read, write, speak, and understand the English language, and listening and computer keyboard skills.

 
For Additional Information on this Opening Please Contact
Donnell Covington: 

Direct Number: 678-981-6070
Email Your Updated Resume to dcovington@pdstech.com


 

Education and Experience Requirements:
High school diploma or equivalent. Prior experience with civil or military aircraft avionics systems and/or installation is helpful.

Unique Skills: The Aircraft Technician I, under close supervision, performs or assists with inspection, maintenance, removal and repair of aircraft engines and support structures. Properly complete CMP cards, work order sign-offs, and other paper work in a timely manner.
 


 
Job Number: 1710075989
Job Location: Savannah, GA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023MVEAA2&URLSource=cjhunter

SECRET Product Repair/Mod Tech C

Description:
PDS Tech is seeking a Product Repair/Mod Technician for an open position in Ridley Park, PA
 
Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.
 
•             Possess a minimum of 7 years of direct aviation experience
•             Possess a minimum of 4 years of direct practical experience (trade specific)
•             Possess a minimum of 5 years of direct CH-47 aircraft type experience, or for, Airframe Structures Maintenance Technician, 5 years of appropriate helicopter airframe experience to include the CH-47 aircraft type
•             Possess an FAA Airframe/Powerplant (A&P) mechanics license, Transport Canada Civil Aviation (TCCA) Aircraft Maintenance Engineer (AME) license or Military equivalent
 
 
Job Number: 1710069133
Job Location: Ridley Park, PA
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K1U8AAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRUCTURAL LAB TECHNICIAN

Description:
Seeking a Structural Lab Technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
‘Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.

US Citizens and Permanent Residents are eligible to apply.
 
Job Number: 39325
Job Location: Windsor Locks, CT
Rate: 37.00
Per Diem: yes
Duration: 18 months
Start Date: ASAP
Input Date: 11/03/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6333
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRUCTURAL LAB TECHNICIAN

Description:
Seeking a Structural Lab Technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
‘Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.

US Citizens and Permanent Residents are eligible to apply.
 
Job Number: 39325
Job Location: Windsor Locks, CT
Rate: 37.00
Per Diem: yes
Duration: 18 months
Start Date: ASAP
Input Date: 11/03/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6333
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

Master Scheduler

Description:
PDS Tech is seeking a Scheduler for a position in St. Louis, MO 
  • Military/Defense Program experience is desired. 
  • Must have an active Secret Clearance to be considered 
  • Earned Value Management System (EVMS) experience is highly desired 


Job Purpose


Maintain synchronization of the supply chain between various organizations, customers, and suppliers by managing product requirements, inventory systems, and production flow of work in process.  Coordinate with management, internal support and shop floor personnel regarding all issues impacting the supply chain and schedule adherence 
 
 Principal Accountabilities

  • Develop and implement strategy to leverage master production schedule to meet deliveries by using Microsoft Project to develop and maintain a fluid IMS schedule. Ensure the appropriate lead times and requirements in keeping with these strategies.  
  • Develop work schedules for the assigned value streams and Operational Work Cells for to the ERP Analyst. The schedules are to be driven by the Master Production Schedule and coordinated with all functions.
  • Work with complex processes and organizational relationships that improve the capabilities of SCM and contribute to the improvement of the business enterprise.  
  • Interface with program management to ensure alignment between schedule and customer requirements. Work closely with program supply chain support and customer demand to ensure the system demand is aligned to customer requirements.
  • Responsible to manage and maintain visibility of capacity by working with operations to ensure the schedule derived from the MPS is achievable.
  • Responsible for updating and maintained the build plans (Auto Planner) for all areas to ensure the right requirements are flowed through MRP for detail parts and raw materials.
  • Define problem resolutions and process improvements.
  • Incorporate planning decisions to reduce material and product variability.
  • Serve on multifunctional teams to define quality, delivery and performance standards. 
  • Perform all duties in compliance with company policies and procedures.

Please send resumes to gsanchez@pdstech.com 
 
Education
  • B.S. degree in engineering or related discipline preferred and/or a combination of eleven to fourteen years of education and relevant experience in lieu of degree. Masters degree in engineering, engineering management, industrial management or business preferred.

Experience and Qualifications

  • A minimum of eight years of engineering experience with a minimum of four years of manufacturing support experience. 
  • Composite fabrication and assembly experience preferred.


  • Requires a thorough knowledge of multiple engineering applications and manufacturing procedures.
  • Possess effective communication skills, both written and verbal.
  • Has expertise in relevant technology and independently applies known principles and practices.

 Physical Demands

  • Frequently required to spend long hours sitting at a work stations and using office equipment. 
  • Frequently required to spend long hours walking and standing on the production floor
  • May be required to walk or stand for brief periods
  • May be required to use stairs when elevator is not available
  • Must occasionally lift, carry, push, pull or otherwise move up to 25 pounds of office supplies and materials 
  • May be required to reach with arms and hands and to stoop, kneel or crouch

Please send resumes to gsanchez@pdstech.com 
 
Job Number: 1710068892
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JsgKAAS&URLSource=cjhunter

Shipping/Receiving Specialist - Level 3

Description:
PDS Tech, Inc. is seeking a candidate for Shipping/Receiving Specialist - Level 3  in Redmond, WA.
  • Confirms and records the receipt of shipments, prepares items for shipping, and loads and unloads trucks.
  • Reports damages and discrepancies for accounting, reimbursement and record-keeping purposes.
  • Completes shipping and receiving reports.
  • Also responsible for managing the inter-departmental transport of materials.
  • Familiar with a variety of the field's concepts, practices, and procedures.
  • Relies on extensive experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Must be able to learn on the job and to exercise good judgment.
  • A wide degree of creativity and latitude is expected.
  • Typically reports to a supervisor. 


Special Considerations: Lifting is generally at or below 30Lbs. without significant repetitions. Moderate exposure to machinery, chemical, biological, and physical risks is anticipated. Operation of a Powered industrial truck is considered at least Industrial and may be considered Heavy as determined by other exposures. 
 
***Candidates must have computer skills and be familiar of how to use a computer*** 

*Associate degree is preferred. 
*Dress code-- No open toed shoes or heels. Pants only- no skirts or shorts. 
*Experience with SAP or other MRP system is preferred. 
*Candidate must be able to follow direction and documentation and listen to instruction. 
*Understanding and awareness of chemicals in the work area. 
 
 
Job Number: 1710066537
Job Location: Redmond, WA
Duration: 6 months
Input Date: 12/11/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Luke Polansky
Address: PACIFIC OFFICE CENTER
310 K ST STE 200

City, State: ANCHORAGE, AK 99501
Phone: 907/562-1633
Fax Phone: 855/685-1397
Email: cecjanchorage@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jC4AAI&URLSource=cjhunter

Software Engineer - Avionics

Description:
PDS Tech, Inc. is seeking Senior level Software Engineers for our Client, a premier supplier of avionics, electronics, and communications systems.
 
This role is focused on the development of avionics software for the US DoD rotary-wing and/or fixed wing market.
 
 In this role you will:
  • Be part of a multifunctional team comprised of systems engineers and software engineers.
  • Develop in a collaborative team environment which often includes team members from diverse geographic and cultural backgrounds.
  • The tasks may include: requirements analysis and capture, system/sub-system design, software requirements definition, software/hardware integration, test case/procedure development using Python, performing/running test procedures for test events, and software implementation using ADA or model based development tools such as MATLAB/Simulink.

Our global development team is split between the USA and other countries, requiring odd hours on occasion.
Customers are both foreign and domestic and include all branches of the armed services as well as civilian entities.
  • 4 year degree in an applicable STEM field
  • Software development experience using C, C++, or C#
  • Proficient in an assembly language
  • Experience with MATLAB/Simulink, Python, ADA, and C/C++ is a plus.
  • Ability to train and mentor entry level engineers
  • Strong verbal and written communication skills
  • Strong critical thinking and problem solving skills.
  • Ability to obtain a Security Clearance. US Citizenship is required.
     

 
Job Number: 1610053780
Job Location: Cedar Rapids, IA
Per Diem: No
Duration: 6 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CBGDAA4&URLSource=cjhunter

Software Engineer - UT - C

Description:
Chipton-Ross is seeking a Software Engineer for an opening in Odgen, UT.

RESPONSIBILITIES:
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating Vehicle Management Systems software.

REQUIRED EXPERIENCE:
Engineering knowledge of C++ application programming, basic wire testing methods, wiring diagram familiarity, Technical Order usage, and process/methodology adherence; Interface with customer personnel is required. Also performs technical planning, research, system integration, verification and validation, documentation, and fielding of program update candidates.

PREFERRED EXPERIENCE:
Provide engineering expertise to support the development and updates to a piece of Air Force support Equipment. The Multiplex Bus Fault Isolator (MBFI) is support equipment which provides capabilities to trouble shoot and detect faults within the multiplex busses of aircraft. A thorough knowledge of aircraft Multiplex bus communication and 1553/194 standards ; Must work well in Integrated Product Team (IPT) comprised of contract labor, client, and government civil servants

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 165233
Job Location: Odgen, UT
Rate: $52 to $60.00 DOE
Duration: 12 Months
Input Date: 12/11/2017
Firm Name: CHIPTON ROSS
Attention: Kent Hayes
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: khayes@chiptonross.com
Website: www.chiptonross.com

Software Engineer with active secret UT

Description:
159707
Requirement# AERO-REQ-0495
Work location Odgen, UT
Work Week 9/80
Priority High
Needed Date 04/10/2017
End Date 04/27/2018
Number of Resources 1
Security Clearance Secret
52-60/hr DOE


Title: Software Engineer

Description
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating Vehicle Management Systems software.


Mandatory:

Engineering knowledge of C++ application programming, basic wire testing methods, wiring diagram familiarity, Technical Order usage, and process/methodology adherence; Interface with customer personnel is required. Also performs technical planning, research, system integration, verification and validation, documentation, and fielding of program update candidates.
Desired:

Provide engineering expertise to support the development and updates to a piece of Air Force support Equipment. The Multiplex Bus Fault Isolator (MBFI) is support equipment which provides capabilities to trouble shoot and detect faults within the multiplex busses of aircraft. A thorough knowledge of aircraft Multiplex bus communication and 1553/194 standards ; Must work well in Integrated Product Team (IPT) comprised of contract labor, Lockheed Martin, and government civil servants

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

Borland C Builder and C++ Programming Software Coding Languag 0-3 Years
Microsoft Access Programming Programming 0-3 Years
Math and Logic Skills Skills 0-3 Years
Technical Writing Technical Writing 0-3 Years



Interview Required Yes
Shift 1st Shift
Max Bill Rate OT Allowed No
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 52.00 USD
5-8 Yrs Pay Rate: 56.00 USD
9+ Yrs Pay Rate: 60.00 USD
 
Job Number: JE-0495
Job Location: Ogden, UT
Rate: 52-60/hr max
Duration: 12 month contract
Input Date: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer

Description:
Seeking candidates for a digital design engineering position. In this position, you will be part of a team designing next-generation digital visible and infrared image sensors. You will work with senior digital design engineers to implement digital blocks (1k – 100k gates) in a variety of CMOS nodes (from 180nm to 28nm). A successful candidate will excel at collaborating in a fast-paced multidisciplinary team environment working to develop cutting-edge image sensor products.

Required Skills:
• Core expertise in writing RTL, synthesis or place and route (Cadence tools preferred)
• Experience with Verilog and or SystemVerilog, writing RTL and test benches
• Understanding of digital design fundamentals including synchronous digital design principles and timing closure
• Experience with full digital design flow from writing RTL through synthesis, static timing analysis and place-and-route.
• Experience with scripting languages including TCL
• Experience with Cadence Encounter
• Experience with an Analog-on-top digital design flow

Desired Skills:
• Experience writing behavioral models for digital circuits and analog/mixed signal interfaces and circuits
• Experience with Conformal
• Experience with a Digital-on-top mixed-signal design flow
• Minimum of five years of industrial gas turbine engineering experience preferably with a gas turbine OEM or gas turbine packager within the 3 to 10 MW power range.
• Experience working within manufacturing/quality and product procurement, support and service engineering.
• Experience with structural (stress) analysis, finite element codes (ANSYS or equivalent)
 
Job Number: 377878
Job Location: SEATTLE, WA
Duration: 13 months
Start Date: asap
Input Date: 10/31/2017
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Engineer / Systems Engineering

Description:
Sr. Engineer / Systems Engineering

Location: Canoga Park, CA
Pay Rate: DOE ($40/hr - $46/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN - Permanent residents/Dual Citizens are NOT eligible for this role **
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** FORTRAN experience is strongly desired **
-The successful candidate will support several technical lead engineers in analyzing and evaluating design changes as well as supporting component/engine tests.
-The system is a pump-fed, staged combustion cycle, LOX/Kerosene liquid propulsion system with an ECU (Engine Control Unit).

The team specifically focuses on:
(1) supporting integrated engine system trade studies through a homegrown analytical tool (EBAL) which iterates for a steady-state power balance ─ optimizing the engine system for weight while meeting the needed (steady-state) thrust performance for vehicle mission success,
(2) defining a reliable, safe open/closed-loop control valve sequence using a time-dependent, homegrown detailed transient model (DTM)…involving physics-based, fluid dynamic, heat-transfer, and controls modeling, for scheduled start, throttle and shutdown operations ─such that no component exceeds their respective design constraints,
(3) developing elements of an real-time engine simulator for a HWIL (Hardware-in-the-Loop) system to support the ECU design, and
(4) supporting component/engine tests through test stand fluid facility modeling and test data analyses.

During the initial system development cycle the successful candidate is projected to support the technical lead in each SPA team focused area, as follows:
40% - Supporting integrated engine system trade studies, optimizing the engine system for weight while meeting the needed thrust performance for vehicle mission success.
40% - Defining a reliable, safe open/closed loop control valve sequence such that no AR component exceeds their respective design constraints.
10% - Developing elements of an real-time engine simulator for a HWIL system to support the ECU design and
10% - Supporting component/engine tests.

Skills:
-The successful candidate should have at least five (5) years relevant working experience in the technical duties cited above or an equivalent combination of education and experience.
-He/she must further have demonstrated strong oral and written communication skills.
-Strong foundations in physics and math required.

Skills Required: FORTRAN AEROSPACE SYSTEMS ENGINEERING

Additional preferred skills:
-Programming skills (languages such as FORTRAN, C and/or MATLAB) a plus.
-Skills in using standard MS Office tool suite on the Windows operating system.
-Candidate must be self-motivated, have good attention to detail and have teamwork skills

Education:
-The successful candidate must have a BS degree (MS degree preferred) in Engineering within one of the following engineering majors: Aerospace, Mechanical, Chemical, Civil or related major
 
Job Number: 8070
Job Location: Canoga Park, CA
Rate: 40-46
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 

  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance or active within the last 2 years
  • Composite experience 

PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the St. Louis, MO area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Mary Ann McCarthy at 800-472-3737 X27244 or mmccarthy@pdstech.com for more information.
 
Job Number: 1610051299
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydebAAA&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051182
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLVAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051189
Job Location: Marietta, GA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydM4AAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051184
Job Location: San Diego, CA
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLfAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 12/15/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking St