Job Search Results

190 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/08/19 Sunday 06:26PM Pacific Time by ContractJobHunter. )

Listings 1 - 190

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/18/2017
Last Updated: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2283 - SUPPLIER READINESS ANALYST - cv. word doc only

Description:
Assess the suppliers for the preparation of each ramp-up and highlight the logistical and operational risks, make recommendations for their mitigation and follow up actions to ensure on-time deliveries.

Manage the capacity analysis for the suppliers, the performance of the supply chain management, the efficiency of the operational manufacturing and logistics.

Identify bottlenecks and develop action plans for their resolution. (VSM, MIFA, inventory plan, transportation plan, etc.).

Engage suppliers in the continuous improvement of the supply chain management, transport planning, inventory planning and other operational concepts.

Bachelor or a technical degree in Operations Management or Industrial Engineering.

Have a minimum of 5 years of relevant experience in the manufacturing industry.

Advanced knowledge of Lean management principles (problem resolution, Six Sigma, etc.)

General experience in the supply chain environment.

Have a good knowledge of MS Project and MS Office environment.

Are perfectly bilingual (English and French) both written and oral.

Are mobile: Travel to supplier%u2019s sites occupy 30% to 40% of working time.

Have good leadership, team spirit, an orientation oriented toward action and results.

Have the skills to analyze products and processes to establish new best practices.

Have a vast knowledge of manufacturing operations, including quality management, facilities maintenance, project financial management, supplier management, production operation, logistics planning control and continuous improvement.

Have knowledge in supplier management, transportation planning, inventory planning and other operational concepts.
 
Job Number: 2283
Job Location: Mirabel, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/16/2017
Last Updated: 11/29/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Sr. Designer to support program initiatives. Creates innovative and practical mechanical and electro-mechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.

Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to provide direction to a design team.
 
Job Number: 41026
Job Location: AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 3 mos +
Start Date: ASAP
Input Date: 11/02/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Supports, performs, and manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
 
Job Number: 39603
Job Location: Stratford, CT
Rate: Goood $$$
Per Diem: possible
Overtime: possible
Duration: 12 mos
Start Date: asap
Input Date: 11/08/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / no clearance / schematic design experience required CA

Description:
Requirement #AERO-REQ-0707
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/28/2017
End Date 11/28/2018
Number of Resources 1
Security Clearance No Clearance

Title: Electrical Engineer

Description

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating wiring harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents.

Skill/Experience/Education

Mandatory:

Experience creating electrical architectures/schematics and wiring harness design.

Desired:

Experience using wiring harness design tools such as Mentor Graphics Capital Harness or HarnesSyS. Experience performing electrical load analysis and electrical power system integration. Experience with CATIA V5. Experience generating System Checkout Procedures and providing support. Experience incorporating subsystem hardware into a System Integration Lab (SIL) and troubleshooting integration issues. Experience working with manufacturing during build up to troubleshoot systems. SSecret Clearance is desired but not a requirement.

Skill Matrix

Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness.
6-8 Years Yes
Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics.
6-8 Years Yes
Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems.
6-8 Years No
Lab and Vehicle Checkout Test and identify failures for system integration lab and aircraft electrical systems.
4-5 Years No


Interview Required Yes


OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0707
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/21/2017
Last Updated: 11/30/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Technician

Description:
1st and 2nd shift available

Job Description
Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
• Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
• Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
• Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
• Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
• Must be able to work from elevated work platforms at various heights.
• Must be willing and able to work in inclement weather.
• Must be capable and comfortable working within a diverse team environment.
• Must possess skills and aptitude to operate test facilities and data acquisition systems..
 
Job Number: CT39325
Job Location: Stratford, CT
Rate: $37.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 10/31/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT UX Designer

Description:
IT UX Designer

Location: Savannah, GA
Pay Rate: DOE
Duration: Long Term Contract
Shift: First

Unique Skills:
-You'll provide user experience guidance to Company business units including Sales, Marketing, Completions, Product Support, and Business Technology.
-You'll collaborate on the day-to-day design of products that assist pilots in their flight-planning efforts, that facilitate collaboration between our interior designers and our customers, and that leverage industry-first AR/VR technology to allow our users to envision the future of Company's products.
-You'll use design research methods to gather requirements from users and business stakeholders.
-You'll work in an Agile Scrum process and will be co-located with team members with roles as Scrum Masters, Developers, and Quality Assurance Analysts. You'll play a key role in the evolution of our mobile style guide into a system of design patterns.
-You'll help shape the look and behavior of our products, while working alongside stakeholders from our various business units.
-You'll build a living library of patterns, and help communicate its value to the organization.
-We'll be expanding the reach of the User Experience Design team from native mobile apps to other parts of the business.
-This reach could include platform agnostic technologies and embedded software, which means experience with responsive design or physical UI controls are of added benefit.

Education and Experience Requirements:
Bachelor's Degree in User Experience Design, Graphic Design, Industrial Design, Human Computer Interaction or relevant curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. A Masters degree may be used to offset one year of experience; PhD may offset two years of experience. 3 years experience as a UX professional.

Position Purpose:
Define interaction models, user task flows, and interface specifications. Communicate scenarios, end-to-end experiences, and screen designs to stakeholders and development teams. Typically responsible for ownership of a small project or a significant portion of functionality on a product release. Informally presents design concepts and deliverables to design team; works with more senior designers to get approval to move projects forward and drive them to completion. Participates in both internal and external design reviews.

Principle Duties and Responsibilities/Essential Functions:
1. Gather user needs via design research methods.
2. Communicate learnings and requirements to business colleagues.
3. Generate ideas via sketches, mockups, and prototypes for testing with users.
4. Research existing design patterns and best practices and apply to design problems.
5. Critique and refine design ideas with UX team members.
6. Create user tasks and conduct usability tests to evaluate concept directions.
7. Create mockups and prototypes to communicate desired directions to development team members.
8. Create final specs and assets for implementation.
9. Work collaboratively with developers to create solutions that find a balance between business needs, usability, and development effort.
10. Support and improve our existing portfolio of products.

Additional Functions:
1. Proactively identifies opportunities to improve existing methodologies, processes or other areas of performance.
2. Proactively communicates issues and status as required. Perform other duties as assigned.

Other Requirements:
1. Experience working in teams.
2. Experience with Agile Scrum development methodologies preferred.
3. A portfolio of work that demonstrates your skills, and the ability to articulate your role on the projects it contains.
 
Job Number: 7951
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/20/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II (FL)

Description:
US Citizen Only. Interim Secret Not Required To Start

SEVERAL OPENINGS IN JACKSONVILLE, FL.

Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Must be comfortable working in a factory environment, working closely with the build team.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.

ACS Group (formerly 'Comforce')
 
Job Number: IEIIFL
Job Location: Jacksonville, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 5+ Months
Start Date: ASAP
Input Date: 01/10/2018
Last Updated: 03/23/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III (LA)

Description:
SEVERAL OPENINGS

The ideal candidate will have experience:
- Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis,
Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting,
Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
- Proficiency and experience using Microsoft Office suite including MS Project.
Candidate must be able to:
- Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
- Interact with employees to gather data for process development and improvements. This may include observing and
documenting processes, and collecting data in manufacturing areas or in assemblies during various production phases.
- This position requires the ability to walk, stand, and enter into work areas via steps or ladders as needed. Candidate may
be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use.

The position required the use of advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
 
Job Number: IEIIILA
Job Location: New Orleans, LA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III (MO)

Description:
SEVERAL OPENINGS

Applies advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: IEIIIMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB / Product Review Engineer II (FL)

Description:
INTERIM SECRET NOT REQUIRED TO START.

Applies basic Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provide summary analysis and metrics as directed by higher level employees for consultation to customers (e.g., management, departments, suppliers). Applies basic industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes as directed to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to assist in developing optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Analyzes and supports the design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Job Number: MRBfl
Job Location: Jacksonville, FL
Rate: up to $50/hour
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 09/26/2017
Last Updated: 11/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - (FL)

Description:
SEVERAL OPENINGS IN THE JACKSONVILLE, FL AREA

Interim Secret NOT REQUIRED to start. US Citizen only.

Assists in the development and implementation of production planning and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans and bill of materials. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.

Prefer Experience in post-production electrical routing and terminations; creation of graphic aids from model based definition; experience in HMS-CAPP and TeamCenter. Working with Design Engineering, Manufacturing Engineering/Planning, Quality Engineering, Liaison Engineering, Industrial Engineering and Operations to resolve Work Instruction and Design constraints.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering
 
Job Number: MFGEIIfl
Job Location: Jacksonville, FL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 4+ Months
Start Date: ASAP
Input Date: 11/07/2017
Last Updated: 12/08/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR (DOE)
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 08/07/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler

Description:
Velocity represents an internationally known leader in the design and manufacture of aerospace fastening, bushings and fittings. Our client has developed innovative products for both metal and composite applications that are used on commercial and military rotor and fixed wing aircraft worldwide. Their products are approved and used by virtually every airplane and helicopter manufacturer. Our client is currently looking for a Material Handler for its manufacturing operation in Tukwila, WA.
Key Responsibilities:
• Must be able to read and understand drawings and blueprints.
• Must be familiar with network driven data sources. (Epicor, PLM, Internet Explorer, etc.)
• Must be able to operate Industrial Band Saws, Overhead Crane, Pallet Jacks, Forklifts, Snips, and Bander, with little or no assistance.
• Become proficient in load pulling, load preparation, and truck loading, with training.
• Learn and understand material requirements, to assist Engineers, Buyers, and Planners with material planning and substitutions.
• Calculate and cut raw material stock, per specified cut instructions.
• Must be able to understand and follow verbal and written communications, in English.
• Must be able to assist Raw Material Lead with other duties, as assigned.
• Must wear and maintain proper Personal Protective Equipment (PPE), at all times.
Core Competencies Required for this Position:
• Computer skills, including knowledge of Internet Explorer, Word, and Excel.
• Experience with precision measuring equipment and industrial power tools.
• Effective communication skills
• Ability to take direction from Lead, Supervisor, or Manager. • Ability to work under pressure and with deadlines. • Strong organizational skills.



Qualifications:
• High School Diploma or GED.
• Previous experience working in a machine shop environment.
• Strong background in Inventory, Receiving, and Dispatch environment.
• Ability to communicate/follow instructions or directions, in English, verbally and in writing.
• Ability to complete all required documentation.
 
Job Location: Tukwila, WA
Start Date: ASAP
Input Date: 11/13/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Structural Engineer -

Description:
Principal Structural Engineer

PE Required in state of CA

Local Candidates Only - No Relo


Ready to put your engineering expertise designing key oil and gas design projects- Do you enjoy being involved on a wide variety of engineering tasks on multiple, complex structural projects.

Company extensive experience in this field, combined with your advanced engineering knowledge, will move your career forward with opportunity to lead teams. We need our engineers to be versatile, enthusiastic to work in highly flexible, team-oriented environment and who have exceptional communication, analytical and leadership skills.

In this role you will design a variety of structures by applying advanced construction/engineering techniques and analysis. You will inspect site conditions to ensure suitability for the designed permanent works.


Give advice on constructed matters. Observe site safety procedures. You may be asked to inspect construction, including temporary works to ensure compliance with approved methods and contract requirements. Maintain records of inspections, work executed, etc.

RESPONSIBILITIES:

Working on construction site, assists Resident Engineer with implementing structural engineering practices and related standards.
Structural engineering systems subject matter expert
Develops and implements QA procedures to ensure quality control performed by others is properly implemented throughout the program and assigned projects.
Reviews standards for materials and equipment to ensure they are in accordance with the specifications and LEED sustainability plan.
Performs constructability, buildability, and maintainability reviews, especially as related to structural systems.
Reviews shop drawing and construction-phase submittals when issues arise that require specific technical assistance.
Provides input regarding all energy efficiency and performance standards.
Reviews design drawings and specifications at periodic check points as required by the PMP milestones.
Participates in value engineering and scope and budget reconciliation when required or requested.
Writes detailed reports related to structural engineering of projects and confers with project and program managers as requested.
Supports the needs of other discipline leads for input to their efforts.
Makes site trips to collect structural engineering related data and construction contractor performance.
Qualifications - External Qualifications:

10 to 12 years of structural engineering design experience with concrete and steel design experience in heavy industrial and oil/gas required
Bachelors degree in Civil engineering, with structural concentration
Professional Engineer registration REQUIRED
Proficiency in utilizing CAD and PC software engineering packages
Must meet customer security requirements and complete a background check by federal authorities
 
Job Number: 361461
Job Location: Bakersfield, CA
Rate: $62hr
Per Diem: no
Duration: temp to hire
Start Date: asap
Input Date: 10/26/2017
Last Updated: 01/08/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
12+ months contract
Englewood, CO

Job Summary

Responsible for all Engineering aspects of the implementation of assigned projects. Coordinates engineering projects in terms of budget, schedule, performance and certification requirements. A leader in the organization with important influence on all technical. Aids in ensuring adherence to contracts, system or product specifications, FAA and Quality standards. Follows and improves processes and ensures team discipline and adherence. A key member of the technical staff, this position is highly influential in the development and direction of the organization. As such, the position should bring new ideas to work. Contribution on a personal or individual level as well as the leadership role is required.

Supervisory Responsibilities

This is a lead engineering role, and the candidate is responsible for serving as a team leader. This position has no direct supervisory responsibilities such as hiring, firing, and compensation plan development...

Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.

Education & Experience
•Bachelor’s degree (BS) in Mechanical, Aeronautical, Aerospace or related engineering field from four-year college or university; and seven to ten years’ related industry experience and/or training; or equivalent combination of education and experience.
•Professional Engineer and/or Master’s degree (M.A.) in Mechanical, Aeronautical, Aerospace or related engineering field preferred
•7-10 years project/program management experience
•7-10 years previous experience in project management, design, analysis and certification of aircraft systems working with engineering staffs of military and civilian aircraft manufacturers
•Analysis, design and development experience in aviation field preferred
•Strong knowledge and understanding of design process and manufacturing processes

Skills
•Strong business acumen with the ability to understand business situations, strategies, theory, processes, management, budgeting and operations
•Ability to multi-task efficiently, works in a fast paced environment on multiple projects, and has a strong attention for detail
•Excellent written and verbal communication skills
•Ability to be a team player with a professional attitude
•Strong interpersonal skills and a high degree of collaboration at all levels

Computer Skills
•Experience with CAD software (Solid works /Auto Cad preferred)
•Proficient with Microsoft Suite, including Word, Excel, PowerPoint and Outlook
 
Job Number: 52702
Job Location: Englewood, CO
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/07/2017
Last Updated: 11/09/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
The Quality Engineer plans and directs activities concerned with development, application and maintenance of quality standards for industrial processes, materials and products by performing the following duties.

Job Responsibilities:
• The Quality Engineer performs professional Quality Engineering assignments of a basic degree of complexity under direction and supervision with limited latitude for independent action and decision.
• Work involves the application of basic engineering principles to develop methods and procedures to improve and maintain product quality standards.
• Assignments include the design of systems of recording and analyzing product quality level; the development of quality control inspection requirements and techniques, and the interpretation of product quality trends.
• May prepare plans, specifications and cost estimates for assignments of moderate difficulty where technical supervision provides an outline of tasks to be performed and suggestions as to methods of approach and procedures to be followed.
• Conducts analysis of tests of a routine degree of complexity and provides recommendations accordingly.
• May assign work to inspectors and technicians.
• Performs other related duties as required.

Minimum Requirements:
• Bachelor's degree (B.A.) from four-year college or university; and one to two years related experience and/or training; or equivalent combination of education and experience.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/20/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRUCTURAL LAB TECHNICIAN

Description:
Seeking a Structural Lab Technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
‘Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.

US Citizens and Permanent Residents are eligible to apply.
 
Job Number: 39325
Job Location: Windsor Locks, CT
Rate: 37.00
Per Diem: yes
Duration: 18 months
Start Date: ASAP
Input Date: 11/03/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRUCTURAL LAB TECHNICIAN

Description:
Seeking a Structural Lab Technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
‘Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.

US Citizens and Permanent Residents are eligible to apply.
 
Job Number: 39325
Job Location: Windsor Locks, CT
Rate: 37.00
Per Diem: yes
Duration: 18 months
Start Date: ASAP
Input Date: 11/03/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Jane
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret UT

Description:
159707
Requirement# AERO-REQ-0495
Work location Odgen, UT
Work Week 9/80
Priority High
Needed Date 04/10/2017
End Date 04/27/2018
Number of Resources 1
Security Clearance Secret
52-60/hr DOE


Title: Software Engineer

Description
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating Vehicle Management Systems software.


Mandatory:

Engineering knowledge of C++ application programming, basic wire testing methods, wiring diagram familiarity, Technical Order usage, and process/methodology adherence; Interface with customer personnel is required. Also performs technical planning, research, system integration, verification and validation, documentation, and fielding of program update candidates.
Desired:

Provide engineering expertise to support the development and updates to a piece of Air Force support Equipment. The Multiplex Bus Fault Isolator (MBFI) is support equipment which provides capabilities to trouble shoot and detect faults within the multiplex busses of aircraft. A thorough knowledge of aircraft Multiplex bus communication and 1553/194 standards ; Must work well in Integrated Product Team (IPT) comprised of contract labor, Lockheed Martin, and government civil servants

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

Borland C Builder and C++ Programming Software Coding Languag 0-3 Years
Microsoft Access Programming Programming 0-3 Years
Math and Logic Skills Skills 0-3 Years
Technical Writing Technical Writing 0-3 Years



Interview Required Yes
Shift 1st Shift
Max Bill Rate OT Allowed No
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 52.00 USD
5-8 Yrs Pay Rate: 56.00 USD
9+ Yrs Pay Rate: 60.00 USD
 
Job Number: JE-0495
Job Location: Ogden, UT
Rate: 52-60/hr max
Duration: 12 month contract
Input Date: 02/23/2018
Last Updated: 02/28/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer

Description:
Seeking candidates for a digital design engineering position. In this position, you will be part of a team designing next-generation digital visible and infrared image sensors. You will work with senior digital design engineers to implement digital blocks (1k – 100k gates) in a variety of CMOS nodes (from 180nm to 28nm). A successful candidate will excel at collaborating in a fast-paced multidisciplinary team environment working to develop cutting-edge image sensor products.

Required Skills:
• Core expertise in writing RTL, synthesis or place and route (Cadence tools preferred)
• Experience with Verilog and or SystemVerilog, writing RTL and test benches
• Understanding of digital design fundamentals including synchronous digital design principles and timing closure
• Experience with full digital design flow from writing RTL through synthesis, static timing analysis and place-and-route.
• Experience with scripting languages including TCL
• Experience with Cadence Encounter
• Experience with an Analog-on-top digital design flow

Desired Skills:
• Experience writing behavioral models for digital circuits and analog/mixed signal interfaces and circuits
• Experience with Conformal
• Experience with a Digital-on-top mixed-signal design flow
• Minimum of five years of industrial gas turbine engineering experience preferably with a gas turbine OEM or gas turbine packager within the 3 to 10 MW power range.
• Experience working within manufacturing/quality and product procurement, support and service engineering.
• Experience with structural (stress) analysis, finite element codes (ANSYS or equivalent)
 
Job Number: 377878
Job Location: SEATTLE, WA
Duration: 13 months
Start Date: asap
Input Date: 10/31/2017
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Engineer / Systems Engineering

Description:
Sr. Engineer / Systems Engineering

Location: Canoga Park, CA
Pay Rate: DOE ($40/hr - $46/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN - Permanent residents/Dual Citizens are NOT eligible for this role **
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** FORTRAN experience is strongly desired **
-The successful candidate will support several technical lead engineers in analyzing and evaluating design changes as well as supporting component/engine tests.
-The system is a pump-fed, staged combustion cycle, LOX/Kerosene liquid propulsion system with an ECU (Engine Control Unit).

The team specifically focuses on:
(1) supporting integrated engine system trade studies through a homegrown analytical tool (EBAL) which iterates for a steady-state power balance ─ optimizing the engine system for weight while meeting the needed (steady-state) thrust performance for vehicle mission success,
(2) defining a reliable, safe open/closed-loop control valve sequence using a time-dependent, homegrown detailed transient model (DTM)…involving physics-based, fluid dynamic, heat-transfer, and controls modeling, for scheduled start, throttle and shutdown operations ─such that no component exceeds their respective design constraints,
(3) developing elements of an real-time engine simulator for a HWIL (Hardware-in-the-Loop) system to support the ECU design, and
(4) supporting component/engine tests through test stand fluid facility modeling and test data analyses.

During the initial system development cycle the successful candidate is projected to support the technical lead in each SPA team focused area, as follows:
40% - Supporting integrated engine system trade studies, optimizing the engine system for weight while meeting the needed thrust performance for vehicle mission success.
40% - Defining a reliable, safe open/closed loop control valve sequence such that no AR component exceeds their respective design constraints.
10% - Developing elements of an real-time engine simulator for a HWIL system to support the ECU design and
10% - Supporting component/engine tests.

Skills:
-The successful candidate should have at least five (5) years relevant working experience in the technical duties cited above or an equivalent combination of education and experience.
-He/she must further have demonstrated strong oral and written communication skills.
-Strong foundations in physics and math required.

Skills Required: FORTRAN AEROSPACE SYSTEMS ENGINEERING

Additional preferred skills:
-Programming skills (languages such as FORTRAN, C and/or MATLAB) a plus.
-Skills in using standard MS Office tool suite on the Windows operating system.
-Candidate must be self-motivated, have good attention to detail and have teamwork skills

Education:
-The successful candidate must have a BS degree (MS degree preferred) in Engineering within one of the following engineering majors: Aerospace, Mechanical, Chemical, Civil or related major
 
Job Number: 8070
Job Location: Canoga Park, CA
Rate: 40-46
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/12/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance or active within the last 2 years
  • Composite experience 

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1610051299
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/07/2017
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydebAAA&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051182
Job Location: El Segundo, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLVAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051189
Job Location: Marietta, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydM4AAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051184
Job Location: San Diego, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLfAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051180
Job Location: Fort Worth, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLLAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLpAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required. 
  • Composite experience 

 
Job Number: 1610051183
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLaAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051178
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLBAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051187
Job Location: Greenville, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLuAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051185
Job Location: Denver, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLkAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051181
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydLQAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051152
Job Location: Houston, TX
Duration: 12 months
Input Date: 06/09/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ydHEAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610050801
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/01/2016
Last Updated: 08/17/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000001ybKsAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer / Mechanical Lab II

Description:
Test Engineer / Mechanical Lab II

Canoga Park, CA
6 Month Contract
$34.00-37.00/Hr

1st Shift

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-This position is for a test engineer in the Materials Characterization & Analysis group in the Material & Process Engineering Department.

-Selected candidate will be responsible for providing materials related technical support for metallic and non-metallic materials to product teams.

-Materials testing, involves the use of varied testing equipment and instruments to perform tensile test, hardness testing, Impact Testing for oxygen compatibility, flammability testing, environmental exposure material conditioning and testing.

-Position requires good hands on skills and familiarity with various measurement tools, and gages, and ability to read and interpret both Spec and Eng hardware drawings.

-Personnel should be able to prep and fabricate test samples, and measure density and specific gravities as needed.

Skills:
-Candidates must have the ability to work in a team oriented environment, have excellent problem solving skills, interpersonal and communication skills, organizational and strong computer knowledge is mandatory. Hands on experience with tensile machines, hardness tester, measurement tools i.e. micrometers, calipers, depth gages, etc.

-Some experience in an industrial setting is also desirable as well as demonstrated proficiency in practical application of engineering principles, or quality systems support.

-Familiarity with Materials Specifications and working knowledge of ASTM test procedures are a plus.

-Familiarity with gaseous & liquid delivery systems and their related components, i.e. plumbing, valves, gages & safety relief systems is highly desirable.

-The ability to design & create engineering drawings for the fabrication of unique test components and fixtures is also a plus.

Education:
AA degree or higher with 5-10 years lab/material testing experience is highly desired.
 
Job Number: 8097
Job Location: Canoga Park, CA
Rate: 34.00-37.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 10/16/2017
Last Updated: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design with active secret / Catia V5 URGENT CA

Description:
160403
Requirement #AERO-REQ-0665
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 10/30/2017
End Date 10/30/2018
Number of Resources 1
Security Clearance Secret required to start (investigation must be less than five years old)

Title: Tool Design
Description

Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Complete understanding and wide application of technical principles, theories and concepts, in the field. Independently determines and develops approach to solutions. Provides technical solutions to a wide range of difficult problems.

Skill/Experience/Education
Mandatory:

Secret Clearance with 5 yr re-investigation required.
Work is performed without appreciable direction. Exercises considerable latitude in determining technical objectives and approaches to assignment. Proficient use of Catia V5 and Microsoft Suites software.
Desired:

Advanced understanding of engineering concepts including design and mechanical. Manufacturing floor experience and the ability to apply tooling concepts to repair and modify aircraft assemblies. Innovative approaches to difficult producibility / manufacturing issues.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Tool Design Engineer 9-10 Years No


Interview Required Yes
OT Allowed Yes (#hours allowed: 20, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 50.00 USD
5-8 Yrs Pay Rate: 55.00 USD
9+ Yrs Pay Rate: 70.00 USD
 
Job Number: JE-0665
Job Location: Palmdale, CA
Rate: 50-70/hr DOE
Duration: 12 month contract
Input Date: 10/04/2017
Last Updated: 11/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
URGENT NEED: Tool Maker w/ clearance and recent investigation in Palmdale, CA #0623AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Tool Maker
Job Number: 0623
Location: Palmdale, CA
Compensation: See Chart Below. DOE
Term: 9 month & possibly longer(maximum of 15 month contract term)
Shift: 1st Shift
OT AllowedYes
Travel: No
Exempt/Non-Exempt: Non-Exempt
Rate Type: Per Hour

Rates
0-4 Yrs Experience Pay Rate: 50.00 USD
5-8 Yrs Experience Pay Rate: 55.00 USD
9+ Yrs Experience Pay Rate: 70.00 USD

Job Description:
Type of Service: Engineering / Technical - POPS

Description
Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Complete understanding and wide application of technical principles, theories and concepts, in the field. Independently determines and develops approach to solutions. Provides technical solutions to a wide range of difficult problems.

Skill/Experience/Education
Mandatory:

Secret Clearance with 5 yr re-investigation required.
Work is performed without appreciable direction. Exercises considerable latitude in determining technical objectives and approaches to assignment. Proficient use of Catia V5 and Microsoft Suites software.

Desired:

Advanced understanding of engineering concepts including design and mechanical. Manufacturing floor experience and the ability to apply tooling concepts to repair and modify aircraft assemblies. Innovative approaches to difficult producibility / manufacturing issues.
 
Job Number: 0623AS
Job Location: Palmdale, CA
Rate: DOE, Please see Job Description
Per Diem: N/A
Overtime: Most likely
Duration: 9 Months +
Start Date: Immediately
Input Date: 10/18/2017
Last Updated: 11/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
URGENT NEEED: Tool Design in Palmdale, CA w/ Active Secret(Recent investigation) #0665AS

Description:
Recruiter to Contact: Adam Salazar
Job Title: Tool Design
Job Number: 0665
Location: Palmdale, CA(1011 Lockheed Way, Palmdale, Ca. 93550)
Compensation: Listed below DOE
Term: Anticipated 12 months & possibly longer(15 month max)
Shift: 1st Shift
OT Allowed: Yes
Travel: No
Exempt/Non-Exempt: Non-Exempt
Rate Type: Per Hour

Rates
0-4 Yrs Experience Pay Rate: 50.00 USD
5-8 Yrs Experience Pay Rate: 55.00 USD
9+ Yrs Experience Pay Rate: 70.00 USD

Job Description:
Type of Service: Engineering / Technical - POPS

Description
Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Complete understanding and wide application of technical principles, theories and concepts, in the field. Independently determines and develops approach to solutions. Provides technical solutions to a wide range of difficult problems.

Skill/Experience/Education
Mandatory:

Secret Clearance with 5 yr re-investigation required.
Work is performed without appreciable direction. Exercises considerable latitude in determining technical objectives and approaches to assignment. Proficient use of Catia V5 and Microsoft Suites software.

Desired:

Advanced understanding of engineering concepts including design and mechanical. Manufacturing floor experience and the ability to apply tooling concepts to repair and modify aircraft assemblies. Innovative approaches to difficult producibility / manufacturing issues.
 
Job Number: 0665AS
Job Location: Palmdale, CA
Rate: See Job Description; DOE
Per Diem: N/A
Overtime: Most likely
Duration: 12 Months+
Start Date: Immediately
Input Date: 10/18/2017
Last Updated: 11/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Welding Engineers - New Orleans, LA

Description:
Now Hiring Welding Engineers!

Overview:

STS AeroStaff Services is now offering Welding Engineer jobs in New Orleans, Louisiana. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best welding jobs in New Orleans, Louisiana; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a Welding Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Position Summary:

The Welding Engineer develops, manages, recommends and coordinates the implementation of a sound welding program and processes through improved weld processes, design specification review, techniques, inspections, and safety procedures.

Essential Duties & Responsibilities:

• Plans, organizes and directs the technical aspects of all types of welding processes and issues within the SSC group
• Directly interface with the product design engineering team to insure design for process and manufacturing requirements are addressed and met and acts as subject matter expert
• Establishes and documents welding processes in accordance with national and military standards/specifications
• Develops, recommends, and coordinates the implementation of improved/enhanced processes, techniques, and safety procedures for all welding performed within the company
• Identifies problems with and identifies the resolution of welding processes, issues, and concerns
• Performs root cause analysis with emphasis on eliminating problems through design analysis, ergonomic issues, and machine/welding/assembly process improvements including equipment/materials purchasing requirements
• Keeps abreast of Best Practices and state-of-the-art welding technologies and safety procedures used throughout the industry
• Serves as a key resource in the development of capacity planning, production control and troubleshooting of production welding processes
• Develops, plans, and administers a welding training class for new and current welders (minimum of 4 times per year)
• Performs all other job related duties as assigned by management

Qualifications:

• A BS degree in Mechanical, Welding, Manufacturing, Metallurgy or Industrial Engineering
• Six (6) plus years’ in marine and/or heavy military equipment manufacturing utilizing Lean manufacturing techniques
• Three (3) plus years’ of progressive experience in weld engineering
• Demonstrated technical knowledge of material reactions during welding or other manufacturing process is required, specifically with respect to Aluminum Alloys commonly used in marine applications
• Demonstrated/ proven contributor and team player within other organizations
• Ability to work independently and closely with a diverse group of people in a team environment
• Proficient using necessary software programs such as AutoCAD, Project, MS Word and Excel
• Excellent oral and written communication skills
• Demonstrated problem identification/analytical resolution skills using statistical comprehension methods are required
• Ability to interface effectively and efficiently with peers, employees and management within and across the organization is required

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40621
Job Location: New Orleans, LA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Back to Advanced Job Search