Job Search Results

757 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/11/14 Wednesday 09:58PM Pacific Time by ContractJobHunter. )

Listings 1 - 757

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2409 - DESIGNER - INTERIORS - cv, word doc only

Description:
Produce Regional Aircraft interface and installation drawings of interior components (cabin shell items, lavatories, galleys, wardrobes, electrical connections, piping, storage modules and structural provisions) while interacting with other groups like stress, systems design, methods, production, interior suppliers and customer design engineering.

Integrate partners to the program

Perform review of designs with interpretation of industry regulatory requirements and design practices.

Prepare and review certification reports associated to new interior certification requirements.

Support suppliers and production personnel's

Technical or Engineering degree in Aeronautical or Mechanical Engineering

Ffive (5) to seven (7) years of related experience

Knowledge of CATIA V5, Enovia is required

Knowledge of CATIA V4 is an asset

Bilingualism (English and French) is an asset
 
Job Number: 2409
Job Location: Mirabel, Canada
Rate: 53.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 10/30/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2418 - MRB LIAISON ENGINEER - cv, word doc only

Description:
Support production and delivery daily operations

Understand and resolve aircraft structural and systems problems as well as provide technical support by answering Non-Conformity Reports (NCRs raised by Quality agents.

Participate in projects that aim to increase productivity, reduce waste and improve financial performance.

Work in close cooperation with other disciplines such as Systems, Stress, Materials & Processes, Logistics, Methods, Quality, Design and Operations in order to achieve the company’s business objectives.

Have either a Bachelor of Science degree in aerospace or mechanical engineering.

Have a minimum of 3 years Material Review Board (MRB) in airframe structure repairs or design experience in aerospace. Also must have 11 or more years of overall aerospace experience.

Must have experience with the client MRB.

Have excellent knowledge of aircraft structures & system installation technical requirements.

Have excellent communication and interpersonal skills.

Have a high sense of commitment.

Have a willingness to accept responsibility while acting independently in a high-pressure partner/supplier team environment.

Have working experience using Catia V4 & V5.

Bilingual - fluent skills in English and French (written and oral).

Have a willingness to share a rotating day/evening/weekend work schedule if necessary.

Workday expectations: full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

*1 position for Evening shift and 1 position with full flexibility* PLEASE ADVISE IF YOU HAVE A PREFERENCE
 
Job Number: 2418
Job Location: mo, Ontario
Input Date: 08/02/2018
Last Updated: 10/18/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2424 - MATERIAL & PROCESSES ENGINEER - cv, word doc only

Description:
Join the Client Completions Centre responsible for the production of the Client aircraft. Our goal is to provide the ultimate customer experience for the world most luxurious business aircraft cabin interiors.

Work in a team of engineers to support special projects, the production floor and new product development.

Sign off on packages of engineering drawings ensuring compliance to regulations.

Write test plans, test reports and other support documentation.

Work closely with the flammability cell and propose solutions to flammability issues.

Support certification and qualification documentation review from our suppliers.

Support a flexible work schedule.

Bachelor degree in Mechanical, Aerospace, Materials or Chemical engineering (or equivalent), with a minimum of 5 years of experience in Materials & Process engineering.

Have a strong background in materials, manufacturing processes and chemical processes.

Are familiar with aircraft interior materials and processes, including but not limited to composite panels, assembly techniques and cabinet finishing.

Are familiar with flammability certification requirements as per FAR 25.

Are familiar with engineering drawings and drafting principles.

Are proficient in Microsoft Office (Word, Excel, etc.)

Have general knowledge of Catia V5 and Enovia (asset)

Have the ability to resolve engineering problems in a manufacturing environment and able to manage very complex and critical engineering projects with minimal supervision.

Bilingual - have strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2424
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 09/09/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2438 - MISSION SYSTEMS ENGINEERING - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Candidates must possess a degree in Engineering (Systems Design, Aerospace, Electrical, Software, or Mechanical Engineering)

Must have a proven track record as a System Designer/Architect capable of conceptualizing, designing and building complex systems from initial customer requirements through to product delivery and commissioning.

Eight (8) or more years of experience of diverse product development in end-to-end deployed systems in a leadership role is required.

Experience developing and mentoring engineers and other technical staff.

The candidate must have comprehensive engineering knowledge in more than one discipline.
 
Job Number: 2438
Job Location: US Northeast, US Northeast
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24 Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2442 - MECHANICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mechanical engineers currently to support a number of programs across the Space Mission organization

Candidates will possess a Bachelor degree from a recognized university, in Mechanical Engineering or equivalent, and a minimum of 4 years of post graduate professional experience.

(Previous Aerospace experience and familiarity with MIL/ASME standards and ISO are a definite asset.)

Ability to interface with customers on a daily basis will be a key asset for this position.

Experience with CAD, preferably 3D is also an asset.

Must have solid oral presentation skills, as well as written communication skills.
 
Job Number: 2442
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 07/27/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2445 - PRODUCT STRUCTURE MANAGEMENT - cv, word doc only

Description:
Responsible for the Product Structure Management within the Global 7000-8000 Program for Interiors and Completions Engineering.

Create and maintain the top levels of a configured product structure from the design phase through certification and transitioning to a sustaining program.Participate in the organization of the completions product structure to optimize Engineering packages with all available customer options.

Participate in the maintenance of the Options Catalog.

Configure the engineering packages in the PLM system and create AC specific product structures.

Work with the Customer Interfacing Team to create project specific Options listings.

Create the Customer Configuration Lists defining all engineering packages required to meet selected options and create Top-Level AC specific engineering lists.

Maintain and define rules controlling the applicability of the Engineering packages in relation to Customer options. Program these rules in the VSpec Customer Definition Software.

Responsibility for control, health and quality of the Aircraft Interiors configured product structures.

Keep an oversight over the product changes and maintain the product structure.

Support the Completions Engineering groups at different
development and customer aircraft definition milestones as needed.

A degree in Aerospace or Mechanical Engineering or equivalent education.

Minimum of 5-7 years%u2019 experience in design, product configuration management.

Possess strong knowledge and technical expertise of product structure configuration within a PDM/PLM tool is essential.

Knowledge of aerospace industry best practices.

Are proficient with ENOVIA VPLM V5 product suite, especially with the product configuration workbenches.

Have knowledge of Business Aircraft Completions.

Experience on CATIA V5, experience with Knowledge Based Engineering (KBE) is an asset

Have experience with SAP & eProduct.

Have experience in pulling together the efforts of varied groups with different objectives and mindsets towards a common objective.

Are resourceful in identifying and removing roadblocks and looking for creative ways to overcome challenges, and can maintain a strong adherence to the Program long-term vision.

Motivated by challenges and a drive for results, bringing a proven track record of success

Good communication and technical report writing skills - able to clearly and concisely convey information and vulgarize technical subjects.

Bilingual (French and English), oral and written is an asset.

Would be available to work on a Tuesday to Saturday schedule if required.

Have a sense of teamwork, the ability to work with minimal supervision, the ability to work in a dynamic environment, you are mobile (Montreal) and you are able to make decisions autonomously.
 
Job Number: 2445
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/22/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2453 - STRUCTURES PRODUCTION SUPPORT - cv, word doc only

Description:
Work within a team to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in resolution of issues.

Generate engineering documents (drawings, MBD, and NIEO, modsums) to support RFC and PCR authorities.

Be involved in and part of all aspects of Structures, Systems Installations and Integration dealing with Final Line by closely working with other engineering departments, internal and external customers, and Structural partners/Suppliers.

Apply Achieving Engineering Excellence and other methodologies to implement and improve business processes, enhance customer satisfaction and meet strategic goals.

Maintaining technical knowledge and awareness of developments related to airframe structures.

Bachelor's or Master's degree in Aeronautical or Mechanical Engineering from an accredited university with minimum of 10 years of experience in airframe primary and secondary structural design including systems installations.

Have detail understanding of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications. Electrical & Systems experience would be an asset.

Have detailed understanding of airframe configuration optimization, loads, stress analysis, manufacturing processes, tooling concepts and structural in-service requirements.

Have understanding of civil aircraft certification rules and experience in certification procedures would be an asset.

Have previous CATIA V5, Design, and support to production experience. MRB experience would be considered an asset.

Have excellent communication and interpersonal skills, leadership skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.
 
Job Number: 2453
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 09/09/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2454 - INTERIORS DESIGNER - cv, word doc only

Description:
Produce Aircraft interface and installation drawings of Client series interior components (cabin shell items, lavatories, galleys, wardrobes, storage modules, seats and more) while interacting with other groups like stress, integration, methods, production and interior suppliers.

Review designs with interpretation of industry regulatory requirements and design practices.

Support suppliers and production personnel.

Bachelor Degree in Aeronautical or Mechanical Engineering or equivalent with a minimum of five (5) to eight (8) years of relevant experience.

Good knowledge of CATIA V5 and Enovia.

Must have experience in Design details, details of assemblies and 2D assemblies, installations aircraft drawings in CATIA V5.

Understanding of interiors products integration in Commercial aircraft is an asset.

Design experience in cabinet assembly design and/or cabinet installation is an asset.

Relevant technical experience in interior completion and design is an asset.

Experience on Client Platform in design is an asset.

Must have solid experience working with Enovia/VPM Nav and Catia (Assy, Part Body, Drafting, etc.)

Must be customer-oriented with innovative problem solving skills.

Must have excellent troubleshooting skills.

Knowledge of certification requirements is an asset.

Must have experience in Primary and Secondary Aircraft Structures.
 
Job Number: 2454
Job Location: Mirabel, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 10/01/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2456 - CERTIFICATION SPECIALIST - INTERIORS - cv, word doc only

Description:
Perform and coordinate the various engineering activities required for CSeries certification:

Write and review test plans and reports for interior certification.

Coordinate and supervise certification tests (laboratory tests), and perform various measurements and calculations to evaluate compliance with the criteria contained in the standards.

Review internal and vendor test plans to ensure that they capture the correct configuration of the change to be made, test the correct components, and perform the tests in the right way to demonstrate the configuration or change meets the required standards of airworthiness.

Write and revise certification reports to demonstrate that the configuration elements are in compliance with Ministry of Transportation standards.

Act as interior experts by evaluating interior designs produced by engineering and ensuring that they meet Transport Canada standards for airworthiness.

Work with the Design Approval Designee (DAD's), the engineering specialists, the flammability engineers, as well as with the design, integration and support teams.

Support and coordinate the review of certification deliverables.

Provide visibility on their status, tracking the number of review cycles required for each deliverable.

University degree in Aerospace or Mechanical Engineering, with a minimum of 11 years applicable experience in an aerospace environment.

Working knowledge of regulatory requirements (AWM 525, 14CFR Part 25, CS 25), particularly those related to Occupant Safety.

Familiar with aircraft design, certification and manufacturing.

Familiar with aerospace industry standards such as SAE specifications, Military and Federal specifications, etc.

Good oral and writing skills in French and English are required, both written and spoken, is an asset.

Must be a team player.

Must also be a person with initiative and good planning skills, strong sense of responsibility, strong negotiation skills and good judgment.

Good communication skills, who are willing to accept responsibilities in a team-working environment.

Must be able to interact constantly with other professionals, technicians, suppliers, and representatives from TCCA, FAA and/or EASA.

Have a good knowledge of the MS Office suite (Word, Excel, Powerpoint, Access).

Have a practical knowledge of CATIA V5 Browser, an asset.
 
Job Number: 2456
Job Location: Mirabel, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/10/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2470 - HYDRO-MECHANICAL SYSTEMS - AFTERNOON & MIDNIGHT SHIFT

Description:
Provide Hydro-Mechanical Engineering support to the Client Final Line Assembly during afternoon and midnight shift.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Hydro-Mechanical systems (Fly-By-Wire & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes, etc)

Conversant with design, qualification and certification test requirements of Hydro-Mechanical systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:
Afternoon Shift (3:30 to 12:00)
Midnight Shift = (11:00 PM to 6:30 AM)
 
Job Number: 2470
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 09/12/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2472 - STRESS ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations.

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work.

Sign engineering drawings and documentations.

Prepare Test Plans and approve Test Reports.

Support various research and development projects.

Bachelor degree in aerospace or mechanical engineering.

Minimum of 5 years MRB experience.

Must have experience including at least one of the following skills in the structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Experience in stress analysis and FEM.

Practical knowledge and experience of Nastran/Patran

Excellent knowledge of aircraft structure and system installation technical requirements.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

A team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2472
Job Location: Montreal, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 08/02/2018
Last Updated: 08/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2475 - WEIGHT & COST REDUCTION DESIGNER - cv word doc only

Description:
Work as a design specialist with a multifunctional team engaged in ensuring the aircraft meets its target weight.

Be responsible to analyze concepts, validate design proposals and provide technical solutions that will lead to weight reduction ideas.

Provide technical recommendation to actively mitigate risks of weight increase.

Work with stress engineers for selection of material selection and sizing of structural elements and systems.

Actively participate in peer reviews and workshops to propose new ideas.

Help build a business case for concept/technical solution validation.

Present the technical solutions to management for approval

Bachelor Degree in Mechanical or Aerospace Engineering, with a minimum of eight (8) years' experience in a manufacturing environment, a minimum of five (5) years of relevant experience in design engineering and a minimum of three (3) years in the aircraft industry.

Excellent knowledge of aircraft primary structural components, secondary structure and system installation requirements.

Excellent knowledge and experience of Catia V5 & Enovia (minimum 2,000 hours).

Able to work under minimum supervision to perform a wide range of technical functions.

Good understanding of stress methodology, GD&T, lean manufacturing and aircraft certification requirements.

Ability to interact with different functions such as Methods, Human factor, customer support, and all the different engineering functions and specialist.

Are flexible, you are results-driven, you are able to influence others.

Are able to make presentations and are a good communicator.

Must be fluent in English, must be able to read and write in English.

Experience in a design lead role is an asset.
 
Job Number: 2575
Job Location: Montreal, Canada
Rate: 57
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/07/2018
Last Updated: 09/09/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
5 MANUFACTURING ENGINEERS - PROCESS

Description:
Johnson Service Group (JSG) has teamed up with a leader in the aerospace, defense and commercial markets.

Our client is seeking a FIVE MANUFACTURING Process Engineers to provide manufacturing expertise to solve complex challenges, and to implement process and product improvements.

Scope of Experience and Responsibilities:

2-5 years+ of experience in an electro-mechanical assembly, test, or machine shop (CNC/NC) environment.
Experience in the aerospace, and/or military industry.
Background in E/M or hydraulic actuation systems is a plus but not required.
Controls engineering experience is a plus.
Strong knowledge of PFMEA, Six Sigma and Lean Manufacturing.
Must have participated in MRB material (NCR processing).
Provide technical solutions to address manufacturing issues
Support new capital equipment purchases and manufacturing implementation.

Participate in process improvements on a project level.
Support manufacturing with implementing complex engineering improvements and solutions.

Adhere to Quality System requirements and support process audits.
Initiate and support Process Flow Charts, PFMEA, and Control Plans.

Experience with Project Planning tools, such as MS Project, is a plus.
Strong troubleshooting and problem-solving skills.
Excellent verbal and written communication skills are required.

Education/Training:

Bachelor of Science Degree in an Engineering, Aerospace or a related technical discipline is required
Six Sigma Green Belt is a plus

Start Date: As soon as possible
 
Job Number: 367270
Job Location: DUARTE, CA.
Per Diem: If qualified
Overtime: Possible
Duration: 9 + Months
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Powerplant & FIFA

Description:
The Aerospace Engineer, Powerplant & FIFA position located here in Moses Lake, WA is responsible for supporting the development and TC test pertaining to the Propulsion System including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System. This role requires the significant exercise of independent discretion and judgment in matters of significance.



Job Duties and Responsibilities (Essential Functions):

Support Flight Testing Activities, including but not limited to:
Discuss and review test plans and preparation activities.
Help determine test specifications (based upon system architecture).
Attend Ground/Flight Test briefing and debriefings
Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
Generate developmental engineering drawings and instrumentation change requests as required.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Create and review Aircraft Restrictions
Create and review Aircraft Troubleshooting
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Strong Knowledge of flight test operations and flight certification, including:
Propulsion System Integration and Certification.
APU and Tailcone Integration and Certification.
Compliance to requirements for; Powerplant / APU Installation, Engine Oil and Fuel System, FADEC, Engine Operating Characteristics, Negative G, Rotorlock Screening, In-flight Restarts, Engine Performance, Cooling and Ventilation, Drainage, Engine / APU Inlet Distortion, Water Ingestion, Fireworthiness, and Thrust Reverser Endurance.
Aircraft Fuel Systems Design, Integration and Certification.
Experience with; Fuel Vent System, Negative G, Cold Soak / Cold Weather Operation, Ullage and Sump Volume, Fuel System Performance, and Fuel Icing Rig.
Well versed with 14 CFR Part 25 and EASA CS-25 certification process.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong skill set for:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve the issue.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal team.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.


Education

Four (4) year degree in Engineering (Aerospace or Mechanical).
Other Engineering fields may be considered.
Experience

Four (4) years aerospace Relevant aerospace engineering experience in propulsion systems including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System.
 
Job Location: Moses Lake, WA
Input Date: 10/09/2018
Last Updated: 11/06/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Aerospace Engineer, Powerplant & FIFA

Description:
The Aerospace Engineer, Powerplant & FIFA position is responsible for supporting the development and TC test pertaining to the Propulsion System including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System. 
 
Job Duties and Responsibilities:

Support Flight Testing Activities, including but not limited to:
  1. Discuss and review test plans and preparation activities.
  2. Help determine test specifications (based upon system architecture).
  3. Attend Ground/Flight Test briefing and debriefings
  4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
  5. Generate developmental engineering drawings and instrumentation change requests as required.
  6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
  7. Create and review Aircraft Restrictions
  8. Create and review Aircraft Troubleshootings
  9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
  10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
  11. Process, analyze, and draw conclusions from post flight data.
  12. Identify non-conformances, quality escapes, etc. to create rejection tags.
  13. Make assessments to ensure safety of flight determination.
  14. Document flight test design problems for long term fix.
  15. Generate and review appropriate limitations documentation.
  16. Write flight test results reports.

Complete special projects and tasks assigned by Group Lead.
Knowledge/Skills/Abilities:
  • Strong Knowledge of flight test operations and flight certification, including:
    • Propulsion System Integration and Certification.
    • APU and Tailcone Integration and Certification.
    • Compliance to requirements for; Powerplant / APU Installation, Engine Oil and Fuel System, FADEC, Engine Operating Characteristics, Negative G, Rotorlock Screening, In-flight Restarts, Engine Performance, Cooling and Ventilation, Drainage, Engine / APU Inlet Distortion, Water Ingestion, Fireworthiness, and Thrust Reverser Endurance.
    • Aircraft Fuel Systems Design, Integration and Certification.
    • Experience with; Fuel Vent System, Negative G, Cold Soak / Cold Weather Operation, Ullage and Sump Volume, Fuel System Performance, and Fuel Icing Rig.
    • Well versed with 14 CFR Part 25 and EASA CS-25 certification process.

  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for:
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.

  • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
  • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
  • Proven track record of improving the efficiency of assigned processes or procedures.

 
Level Requirements (Minimum):
Education


  • Four (4) year degree in Engineering (Aerospace or Mechanical). 

    • Other Engineering fields may be considered.


Experience

  • Four (4) years aerospace Relevant aerospace engineering experience in propulsion systems including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System.

 
Travel (flying and driving) to various domestic and international worksites and client offices are required.  Frequent travel required to the Moses Lake Facility for extended periods of time during scheduled flight test operations.
 
 
Job Number: 1810088065
Job Location: Moses Lake, WA
Duration: 24 months
Input Date: 07/04/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002maMWAAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers (Level 2)

Description:
STS Technical Services is hiring Aerospace Engineers (Level 2) in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Duties:
The successful candidate serves as an engineer driving commercial aircraft mechanical/structures component repair and vendor oversight. This position works very closely with component engineering, fleet engineering, internal shops, external vendors and company TechOps MRO customers.

The position will undertake tasks including but not limited to:
Reviewing data and recommending and implementing changes as required
Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected components
Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and company's Technical Operations Policy and Procedures (TOPP) and all other engineering processes
Providing status for projects/issues through various briefings and documentation (i.e. Fleet Briefs, Quarterly Business Review, and applicable monthly reports)
Preparing and conducting Engineering Working Group meetings
Revising numerous FAA approved Manuals and Engineering Reports
Collaboration and constant communication with Manufacturers and the FAA ACO and FSDO/CMO
Irregular shift hours may be required, on rare occasion, due to critical requirements. This may include weekend work depending on criticality of the issue
Occasional travel is required to support the programs (less than 10%)
This position will focus, initially, on aircraft structures and/or mechanical component systems
This position reports to a lead engineer and the Manager of Component Engineering

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 43637
Job Location: Atlanta, GA
Duration: Contract
Input Date: 08/09/2018
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Assurance Engineer_Carlstad NJ

Description:
Opportunity for an experienced Aerospace Quality Engineer in a metal manufacturing environment. Must be familiar with manufacturing methods including heat treating, welding, composites, NDT and inspection methods.
• Knowledge of various materials (Inconel, Aluminum, Composites)
• Knowledge of process (heat treating, welding, NDT)
• Knowledge of inspection methods
• Knowledge of ISO, EAR, and ITAR standards and regulations
• Strong verbal, written and communication skills
• Project management, time management, problem solving and organization skills
• Strong mechanical skills
• Ability to work as an effective team member


Develop, implement and administer various methods and procedures to ensure product quality. Design and plan product inspections to assure potential defects are minimized and product and system quality levels are maintained. Investigate root cause and implement corrective actions to assure efficient and effective system execution. Audit product and processes as required including vendor surveillance.

• Review procedures, purchasing documents, drawings, manufacturing travelers, process data, certifications for completeness and adequacy.
• Prepare and review product data packages
• Establish and provide written procedures for quality assurance activities as related to product
• Generate non-conformance reports based on inspection results
• Generate inspection method sheet for inspectors
• Participate in review and disposition or nonconforming materials
• Investigate causes of system and hardware non-compliances
• Prepare and maintain quality assurance program plans in accordance with prescribed standards
• Administer the audit system using prescribed audit methods and checklists
• Participate in customer audits and source inspections.
• Participate in technical, quality and commercial meetings with customers and suppliers
• Perform other related duties as assigned

Qualifications and Education Requirements
• 8 or more years experience in an aerospace manufacturing operation with certification to ISO9100
• Ability to work autonomously and make effective decisions
 
Job Number: KM0020
Job Location: Carlstadt, NJ
Rate: OPEN
Per Diem: No
Input Date: 07/20/2018
Last Updated: 08/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Weld Engineer_Carlstadt, NJ

Description:
30% - Develop welding techniques, procedures including selection of equipment utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles.

20% - Provide oversight to a team of at least four welders providing guidance for production welding, development welding, and equipment maintenance.

15% - Identify and champion continuous improvement projects throughout manufacturing.

10% - Conduct research and development investigations to develop and test new fabrication processes and procedures. Prepare technical reports to document results.

10% - Evaluate new developments in welding field for possible application to current welding problems or production processes.

10% - Direct and coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification.

5% - Contact personnel of other agencies, engineering personnel, or clients to exchange ideas, information, or offer technical advice concerning welding matters.
Requires a Bachelor's degree in Weld Engineering, Mechanical Engineer or other related discipline and at least 8 years of experience in aerospace working with nickel, stainless, ferrous and aluminum alloys (or an equivalent combination of education and experience)
 
Job Number: KM0021
Job Location: Carlstadt, NJ
Per Diem: No
Duration: LT
Input Date: 07/24/2018
Last Updated: 08/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Component Design Engineer

Description:
Keys;
-Aircraft Experience (industry experience)
-Aircraft Components
-Hydraulic or Fuel System Design experience on Aircraft's
- CAD (Solidworks desired but not absolutely required)
-FAA knowledge or Past experience (strongly desired)

Description
Looking for a product design engineer that has prior experience with aircraft components.

Responsibilities
•Provide engineering expertise to ensure that all products are designed, procured and built according to customer and company quality requirements.
•Design new products and redesign existing products to meet customer needs and specifications.
•Be involved in product concept through completion.
•Serve as project managers as assigned once acquainted with product base.
•Work on multiple projects simultaneously.
•Customer interface will be varied depending on the projects assigned.
•This engineer would be involved heavily in the testing of the product they are working on/assigned, they will need to be able to perform CAD modeling, assist with prototype creation, and write technical reports.

Requirements
Compliance with ITAR regulations requires a US Citizen or Permanent Resident.
•5 – 15 years Design and Development experience with aircraft components. Must have experience writing component specifications, or designing products to meet those specifications.
•Knowledge and experience with products that are required to meet either military standards or FAA standards.
•Self-starter and creative problem solver and solution provider. Able to work well independently or as part of a team.
•Bachelor’s degree in either Mechanical or Aerospace Engineering required with an emphasis on mechanical design preferred.
•3D CAD modeling proficiency required.
•Experience in aircraft fuel or hydraulics systems a plus
•Experience with requirements management software a plus
•Experience in SolidWorks is a plus
•Knowledge of FEA a plus
 
Job Location: St Louis, MO
Rate: $50-$60/HR DOE
Per Diem: Yes, Split
Overtime: Possible
Duration: 6-12 Months
Start Date: ASAP
Input Date: 07/30/2018
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.


The Structures Company is an AA/EOE.
 
Job Number: 217
Job Location: Greensboro, NC
Rate: $50-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 10/05/2018
Last Updated: 11/14/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS System Design Engineer - Pacific NW - Contract

Description:
Keltia Design in Everett, WA is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis. We have been providing these services for over 18 years.

We are working with our client in the Pacific NW area that is has a potential 6 mo+ contract for an Aircraft ECS System Design Engineer

Must have 5+ years of experience on Boeing and/or Airbus Mechanical Systems
Knowledge of oxygen and ECS systems required. Experience with fire protection and/or safety systems helpful. Also experience with CATIA V5 required.

The successful candidate will create and check detail, assembly and installation designs/drawings, engineering orders and substantiation documents.

If interested, please include your desired rate and availability on your response along with your most recent resume in a WORD.doc format

Thank you
 
Job Number: KEL7618
Job Location: Pacific NW
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 6mo+
Start Date: ASAP
Input Date: 08/22/2018
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

Aircraft Mechanics

Description:
Role Description
  1.  Service, repair, troubleshoot and modify aircraft and aircraft engines.
  2. Repair, replace and rebuild aircraft structures, system and functional components.
  3. Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
  4. Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
  5. Research and understand FAA technical data relevant to assigned tasks.
  6. Maintain the premises in a clean and organized manner.
  7. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Knowledge/Skills/Abilities:
 
  • Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.


  • Good leadership (individual contributor) presence:

    • Able to lead by example and live/work by company values. 
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members. 
    • Able to be patient and objective in difficult situations with different types of people.



  • Good customer service tool box:

    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to address and solve important issues.

  • Good organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines. 
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Good communication skills (oral, written) with customers.  
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

  • Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. 
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks.  Results-oriented planner who ensures that goals are met.  Able to set priorities and keep to projected schedules.
  • Computer Skills:  Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

 
Education
 
  • Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school   
  • A&P Certificate
  • Japanese Bilingual preferred

 
Experience
 
  • Three (3) plus years of aircraft mechanical experience preferred

 
Job Number: 1810089104
Job Location: Moses Lake, WA
Duration: 6 months
Input Date: 07/31/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mf2gAAA&URLSource=cjhunter

Aircraft Seat/Slide Technician

Description:
PDS Tech is seeking Aircraft Seat/Slide  Techs for open positions Atlanta, GA


  • Perform final assembly of interior systems and mechanical assemblies. 
  • Disassembles aircraft interior components.
  • Responsible for proper storage and separation of serviceable parts, i.e. bin or bag.
  • Responsible for proper storage and separation of unserviceable parts, i.e. reject or scrap.
  • Wash serviceable parts.
  • Seat Cleaning.
  • Correct usage of pressure washer.
  • Removal of aircraft seat cushions.
  • Removal of aircraft seat dress.
  • Completes daily paper work for job assignments, indicating material used and amount of time involved.

Basic Qualifications:
  • High School Diploma or GED
  • Mechanical experience required
  • A&P license a plus
  • Knowledge of basic hand tools, i.e.
  • Knowledge of applicable power tools.
  • Completion of seven (7) required safety courses: Respiratory Training, Injury Prevention Program, Emergency Action Plan, Blood borne Pathogens, Hazardous Communication, Lock Out Tag Out, Ergonomics.

 
Job Number: 1810084811
Job Location: Atlanta, GA
Duration: 3 months
Input Date: 04/25/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mNhPAAU&URLSource=cjhunter

Assembler

Description:
PDS Tech, Inc. is seeking Assemblers in Lincolnshire, IL.  
Please reach out to Tiffany Armour tarmour@pdstech.com or call her at 480-351-2945

In this role, you will make utility safety equipment used in commercial, industrial, and residential settings.

What you will do:
  • Assemble fabricated parts at floor stations.
  • Test and calibrate parts and mechanisms to meet tolerances and product specifications.
  • Use hand tools and power tool to assemble units according to product specifications.
  • Identify units that fail tests or tolerance levels and repair as necessary.

What you will get:

  • A position working at a world-class Fortune 100 manufacturer
  • Training in the area of specialty
  • Opportunity to work with a team making products used in facilities worldwide
  • A fair and consistent pay check

Education Required:
  • High school diploma or GED

Qualifications:

  • Ability to read blueprints
  • mechanical assembly experience


Must provide own safety shoes.

Schedules/Shifts Available:


  • 6:30 am - 3:00 pm

 
Job Number: 1810081754
Job Location: Lincolnshire, IL
Duration: 4 months
Input Date: 05/08/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tiffany Armour
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dxB4AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assistant Project Engineer

Description:
Under the guidance of senior project engineering personnel, leads engineering teams in the execution of projects or segments of engineering programs. Establishes requirements, operational objectives and work plans for the successful completion of those efforts.

Unique Skills:
• DO-160 Experience preferred Smarteam Experience preferred Experience developing electro-mechanical systems required Bachelors in technical field preferred

Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Duties and Responsibilities:
• Responsible for planning, organizing and conducting segments of engineering projects with diversified technical requirements.
• Defines project work scope, develops statements of work, task descriptions, product plans, budget estimates and manpower requirements.
• Assigns tasks to functional personnel and suppliers for specific projects and provides the necessary project direction to meet schedules and fulfill requirements.
• Provides project management between engineering sections and all related functions including program management, other departments, suppliers, consultants, and customers.
• Anticipates problems with assigned projects (technical, budget, schedule) and recommends appropriate action to prevent their occurrence.
• Effectively reports to management on key project accomplishments, status, issues and budget.
• Approves project related engineering data to assure compliance with corporate policies and FAA/military requirements as required.
 
Job Number: 24-264
Job Location: Savannah, GA
Rate: $50-56
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assistant Project Engineer

Description:
Assistant Project Engineer
Savannah, GA
Rate: $50.65-$56.28

Unique Skills:

DO-160 Experience preferred Smarteam Experience preferred Experience developing electro-mechanical systems required Bachelors in technical field preferred


Education and Experience Requirements:

Bachelor's Degree Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) years Engineering experience. One (1) year Project management experience. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.


Position Purpose:
Under the guidance of senior project engineering personnel, leads engineering teams in the execution of projects or segments of engineering programs. Establishes requirements, operational objectives and work plans for the successful completion of those efforts.

Principle Duties and Responsibilities:

Essential Functions: 1. Responsible for planning, organizing and conducting segments of engineering projects with diversified technical requirements. 2. Defines project work scope, develops statements of work, task descriptions, product plans, budget estimates and manpower requirements. 3. Assigns tasks to functional personnel and suppliers for specific projects and provides the necessary project direction to meet schedules and fulfill requirements. 4. Provides project management between engineering sections and all related functions including program management, other departments, suppliers, consultants, and customers. 5. Anticipates problems with assigned projects (technical, budget, schedule) and recommends appropriate action to prevent their occurrence. 6. Effectively reports to management on key project accomplishments, status, issues and budget. 7. Approves project related engineering data to assure compliance with corporate policies and FAA/military requirements as required.

Additional Functions: 1. Works under direct leadership and guidance of a senior-level project engineer. 2. Actively works to improve daily processes and ensures all work meets customer requirements. 3. Maintains a current knowledge of technical developments. Perform other duties as assigned.

Other Requirements: 1. The level of skills and abilities appropriate for this grade are detailed in the departments skills/knowledge matrix. 2. Excellent verbal and written communication skills, including strong interpersonal skills, teambuilding skills, and the ability to persuade others without creating adversarial relationships. 3. Works closely with project team members to resolve problems with assigned projects (technical, budget, schedule). 4. Interacts with senior management and key officials of other organizations as required. 5. Responsible for building and leading engineering project teams.
 
Job Number: 9231
Job Location: Savannah, GA
Rate: $50-$56
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AutoCAD Drafter / Designer (119)

Description:
*This is a one Year contract position located in Hudson, NH*



We are looking for an CAD drafter who will be designing, diagraming, and documenting printed circuit boards for a defense subcontractor. Will be working with schematics, engineering change orders (ECO), PDM tools, etc. Work will be to design considering DoD specifications.



Required:
*3 years’ experience electronics circuit board drafting or designing using AutoCAD Mechanical 2017.
*Familiar with PDM tools.
*Familiar with Cadence Allegro
*Knowledge of ASME Y14.100 and ASME Y.14.5
*Knowledge of DoD work
*Associates Degree in related discipline
 
Job Number: 119
Job Location: Hudson, NH
Input Date: 08/20/2018
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Avionic / Electrical Test Technician

Description:
Avionic / Electrical Test Technicians needed for direct hire long term positions.  
Opportunity to work direct for the premier commercial aircraft manufacturing company in the US.

Mechanics in this position test all mechanical and electrical systems on aircraft, making all required changes and repairs prior to flight test. Mechanics will be working on a live aircraft.
  • Set up and perform bench test or automatic test per work order, test document, test equipment manuals and/or engineering instructions.
  • Perform tests using various computer systems, oscilloscopes, power supplies and meters.
  • Troubleshoot faults in electronic circuits and mechanical systems using various types of test equipment (e.g., Special Test Equipment "STE", Automated Test Equipment "ATE" and shop aids) and adjust or repair as needed.
  • Assist and support aircraft technicians in sequencing of work operation, troubleshooting and problem analysis/resolution.
  • Obtain and use appropriate engineering drawings, test documents, and any other necessary paperwork or on-line systems.
  • Order parts and components required to complete assigned task.
  • Check test equipment prior to use to ensure proper operation and certification requirements are met, utilizing test equipment manuals, check sheets and self test procedures.
  • Energize various systems to perform a variety of functional tests per drawing, test documents, nonconformance reports and other documents in order to verify integrity of the systems.
  • Use, assemble and maintain new and existing shop aids for testing and troubleshooting airframe and power plant systems and subsystems.
  • Select proper hand, power and/or bench tools needed to perform required operation (e.g., screwdrivers, pliers, torque wrenches, crimpers, cable tools, band saw, drill press and circular sander).
  • Operate mechanical lifts of various types to locate parts/assemblies into position or to perform assembly work.
  • Locate tools and/or parts on airplane using tooling holes, pilot holes, K holes, or by hand (as required), per drawing, IP, or tooling instructions.
  • Align parts and secure in place using Clecos or tooling/hand clamps.
  • Check for good edge margins and alignment and shim parts, as required.
  • Handle and protect components and assemblies in accordance with shop procedures and drawing requirements.
  • Set up assembly tools per tooling instructions or drawing.
  • Select drill bits, reamers and/or countersinking tools for pilot and full size holes per drawing.
  • Drill, ream, countersink full size holes in parts/ assemblies, in proper sequence and to correct size, per drawing using drill motor.
  • Set countersinking tools to proper depth, as required.
  • Disassemble parts and deburr holes using chip chasers, deburring tools and files to prepare for installation of fasteners.
  • Use solvents to clean surfaces prior to sealing or assembly.
  • Apply sealant, alodine, primer, adhesives and special finishes.
  • Determine and obtain correct type and size fasteners.
  • Install fasteners in correct sequence per drawing, using correct tools (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
  • Handle and dispose of hazardous materials in approved manner.

  • Aircraft Technicians need a strong working knowledge of all aircraft systems and various types of test equipment.
  • High school graduate or GED preferred.
  • Experience troubleshooting and fixing problems with various types of electronics equipment
  • Experience reading and interpret production illustrations, wiring diagrams, and/or schematics
  • Experience using a computer such as internet navigation, email, Microsoft Office and/or other specialized computer applications
  • Positions open to all US Persons.  "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee.

 
Job Number: 1810088901
Job Location: Everett, WA
Duration: 24 months
Input Date: 07/23/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mduYAAQ&URLSource=cjhunter

Avionics Technician - CA

Description:
Perform assembly and test tasks on wire harnesses, control boxes, and electromechanical assemblies per written procedures and drawings.
" Mechanical / electrical assembly of PCB assemblies into product chassis
" Perform verifications of flight hardware and documenting results in a clear, precise and complete manner
" Work with and provide input to the development and manufacturing engineers to improve part manufacturability
" Recommend and implement continuous improvement activities in production methods, equipment performance and team effectiveness
" Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment
" Constantly learn new things-and share them with your team members
" Performs other duties as assigned
" Knowledge and understanding of lean manufacturing
" Working knowledge of Avionics systems and their operation and the proven ability to troubleshoot basic problems
" Experience with manufacturing-based ERP systems a plus
" Strong mathematical, basic computer, problem solving and decision making skills, and strong written and verbal communication skills
" Experience with EMI / EMC / RF testing
" Experience with thermal vacuum testing
" Experience with shock testing
" Experience with LabVIEW, Python or other test and scripting languages
" Experience working with National Instruments, or comparable lab equipment
" Experience building wire harnesses including terminating and installing connectors. Ability to travel to test and launch site in Mojave
" Passion for space exploration and a firm belief in the utility of affordable access to space

1 opening will be for 1st shift (7am-2:30pm) and the other 2nd shift (1 of each). 2nd shift is 2-10:30pm.


 
Job Number: 172283
Job Location: Long Beach, CA
Rate: $DOE
Duration: 3 months
Input Date: 07/03/2018
Last Updated: 11/14/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Avionics Technician 2

Description:
PDS TECH INC. is seeking Avionics Technician 2 located in Rancho Bernardo,CA.


Summary:

Performs a variety of duties in the electronic, mechanical, or electromechanical areas.
Constructs, troubleshoots, calibrates, adjusts, tests, and maintains equipment, components, devices, or systems.
Works from engineering drawings and written or verbal instructions.
Operates related equipment; conducts tests and reports data in prescribed format.
Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

 
Basic Qualifications:
*High School Diploma/GED and a min of 2 year of experience fabricating and testing aircraft electrical wire harnesses.
*Experience reading and working to wiring schematics, blueprints, parts lists, and other engineering documentation.
*Knowledge of Electro-Static Discharge (ESD) and Foreign Object Elimination (FOE) principles and experience working in an ESD and FOE sensitive environment.


Preferred Qualifications:
*Previous certifications for fabricating and testing electrical harnesses per IPC/WHMA-A-620.
*Previous certifications and experience soldering electrical and electronic assemblies per joint industry standard IPC J-STD-001.
*Previous experience with 5S practices and working in a lean manufacturing environment.
* AA Degree preferred.
 
 
Job Number: 1810085210
Job Location: San Diego, CA
Duration: 12 months
Input Date: 04/24/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mPTtAAM&URLSource=cjhunter

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air System (BAS) and Vapor Cycle System (VCS) Design Engineer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

The Structures Company is an AA/EOE.
 
Job Number: 213
Job Location: Greensboro, NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 08/01/2018
Last Updated: 09/12/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer/Procurement Analyst

Description:
Description:
At Client Rotary and Mission Systems, we are driven by innovation and integrity. We believe that by applying the highest standards of business ethics and visionary thinking, everything is within our reach – and yours as a client employee. Client values your skills, training and education. Come and experience your future! Candidate will also be responsible for general purchasing of low to medium complexity Mechanical and Electrical commodities and sub-assemblies in support multiple Client’s programs. Candidate will engage with cross-functional teams to ensure supplier deliveries meet program performance, schedule and cost requirements. Adheres to policies, procedures, programs, systems and assure timely and economical procurement of all material, parts, assemblies, equipment and service.

Skill/Experience/Education:
Mandatory:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 3 years of professional experience; or 1 year of professional experience with a related Masters degree. Considered experienced, but still a learner.
 
Job Number: 08064
Job Location: Moorestown, NJ
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Pritam Prince
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CATIA V5 - Structures / Mechanical

Description:
Completions Design / Aircraft Structures Cabin Interiors. -Design responsibilities of interior furnishings and amenities as part of outfitting new aircraft. Engineering design work includes the creation of drawings/models using either CATIA V5.
 
Job Number: 18-12793
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/13/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/04/2018
Last Updated: 11/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

CNC Machinist/Operator (4) - CA

Description:
Chipton-Ross is seeking a CNC Machinist/Operator for an opening in City of Industry (3) and Walnut, CA (1).

Controls operation of single or multiple production machines in accordance with established procedures and guidelines for the process of manufacturing products

RESPONSIBILITIES:
Setups and operates a variety of machine tools such as, milling machines, to make metal parts, mechanisms, tools or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequences of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

REQUIRED EXPERIENCE:
Must be able to read blue prints, NC programs, understand M and G codes. Must be able to drive forklift. Must be able to lift up to 50lbs. Must know NC table setups.

HARD REQUIREMENTS:
Familiar with CNC Gantry machinery. Experience with various materials including aluminum and titanium. Candidates must have Gantry experience, 5 axis, 3 router vertical milling machines, long table setups and/or single router high speed machines such as Haandtmans. (Client manufactures long aluminum extrusions that are 50 to 100 feet long.)


EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:

Full-Time

 
Job Number: 168733
Job Location: Walnut, CA
Rate: $18 to $30.00 DOE
Duration: 6 Months, 1 Year
Input Date: 02/15/2018
Last Updated: 11/14/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
COMPONENT CALIBRATION LAB TECHNICIAN

Description:
Component Calibration Lab Technician

Mechanical Component Calibration lab technician capable of working from Engineering drawings with limited guidance to fabricate and install mechanical load and data acquisition systems required to support ongoing Engineering Ground and Flight Test Development programs.

Duties and responsibilities include the calibration of aircraft and ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
 
Job Number: 365891
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Interior Mechanical Systems DER

Description:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Unique Skills:
• Requires five years of experience in executive cabin Mechanical Systems STC design and certification required.
• Document creation and interior compliance experience preferred. Current or former DER / ODA Unit Member preferred. Delegations Needed: Chart C1: A1, E1, F1, K1, L1

Education
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
 
Job Number: 24-272
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 07/03/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2

Description:
Location: Dallas (Grand Prairie, TX)
Rate: $50.00/HR
Duration: 9 month contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST BE ABLE TO OBTAIN A SECRET CLEARANCE****
****MUST BE A U.S. CITIZEN****

Description
- Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX.
- The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electromechanical components used in military applications.
- The selected Candidate should be a self-starter, capable of handling several tasks at once.
- The selected candidate must be able to work without supervision.
- Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.


Skill/Experience/Education
Mandatory:
- Must have or must be able to obtain a security clearance.
- Must be proficient with computer tools such as MS Excel and Access.
- Candidate should have experience in electrical component manufacturing process and physical property analysis.
- Parts Management - Working with designers to select components for use in designs.
- Obsolescence - Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- This position requires periodic travel to both the customer and supplier locations.


Desired:
- The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
- Experience in Components Engineering with broad knowledge of electronic components and devices.
- The ideal candidate has experience working electrical components on a Production Program.
- Experience in the disposition of Q-Notes.
- Experience with parts release process, and with formal Configuration Board support.
- Experience working with Global Supply Chain, Quality and Manufacturing groups.
 
Job Number: 9445
Job Location: Grand Prairie, TX
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/28/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Design Engineer

Description:
Position Summary:
The Composite Design Engineer will be responsible for much of the structural design and documentation required as part of the development of an entire line of FAA TSO certified composite floats. This position provides a unique opportunity to be an integral member of a team dedicated to the creation of a new manufacturing initiative.
Position Responsibilities:
1. Conceptual design and related design studies of composite structure, including: outer mold line lofting, structural layout, part break definition, bonded joint configuration, assembly methodology, design for manufacturability, and tooling approach
2. Detail structural design using CATIA CPD, including ply layout, splicing, and darting information
3. Creation of design documentation, including drawings and prototype manufacturing planning
4. Creation of technical documentation related to design. This may include reports, presentations, and analyses which document lessons learned, design decisions made, results of tests conducted, etc.
5. Assist the tooling group with design of tooling, fixtures, and jigs for composite structure
6. Work with the manufacturing team to produce prototype and production composite parts and assemblies in accordance with approved specifications
7. Other engineering tasks central to the creation of a composite float such as: loads calculations, ply shape modification and nesting, providing design support to other departments, etc.
Experience and Skills
Qualifications:
· Bachelor of Science Degree in Engineering (Aerospace, Mechanical, etc.) with experience in all stages and facets of composite structural design. New product development experience preferred
· Proficiency with CATIA V5. Autodesk Inventor experience a plus
· Experience with composite part and assembly definition. Experience with CATIA CPD strongly preferred
· Experience with composite drafting and documentation practices, including familiarity with GD&T
· Experience with design data control and product lifecycle management practices. Familiarity with Autodesk Vault a plus
· A strong understanding of the theory and practical application of composite structures in the aerospace industry
· Strong intuitive understanding of practical composite fabrication methods and material behavior
· Understanding of metallic part design and integration into composite structure
· Excellent interpersonal, presentation, and written communication skills
· Hands-on experience with composite part and bonded assembly fabrication

The Structures Company is an AA/EOE.
 
Job Number: 205
Job Location: ST Paul, MN
Duration: Permanent/Contract
Start Date: ASAP
Input Date: 10/02/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contingent - Technician L1

Description:
Under direct supervision performs daily tasks as assigned. Conducts routine tests used to support engineering efforts. Uses mechanical and fabrication tools properly. Learns standard test modes in area of responsibility and can demonstrate proper use consistently. Minor or light fabrication ability. Can change vehicle parts & assemblies. Receives direct supervision on tasks and daily activities. Can work independently or as part of a team. Vocational certificate or related Associates Degree or 4 years related hands on vehicle experience may be applied for jobs at the higher side of the range.
 
Job Number: 18-33336
Job Location: Raymond, OH
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-03-31 00:00:00.0
Start Date: 2018-08-09 00:00:00.0
Input Date: 08/09/2018
Last Updated: 08/22/2018
Firm Name: NESCO RESOURCE
Attention: Aaron Ludwig
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Structural Mechanic II

Description:
Unique Skills:

Wing assembly experience and able to drill close tolerance holes. Have mechanical skills, pneumatic hand tool skills usage such as drills, rivet guns, and grinders. Working with and have knowledge of jigs and fixtures, etc.


Education and Experience Requirements:
High School Diploma/GED.Two (2) years related structural assembly experience. Experience working with Solumina and Smarteam preferred.


Position Purpose:

In a team oriented work environment, under minimal supervision, performs a variety of structural assembly operations in a production department.

Principal Duties and Responsibilities:

Essential Functions: 1. Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet requirements. 2. Rivet structural assemblies and parts using all tools required to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets). Must display the ability to remove fasteners without damaging structure. 3. Read work orders, blueprints, lofts, sketches and operation sheets to determine sequence of operations, type size and hole pattern for rivets. 4. Check all work and ensure a defective free assembly prior to final inspection. 5. Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). 6. Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners. 7. Make repairs per Discrepant Material Tags (DMT), Material Review Request (MRR), Production Change Orders (PCO), performs necessary rework to ensure installations meet conformity. 8. Maintain a neat and orderly work area, supports the company 5S Program, and complies with all safety regulations. 9. Able to work with minimal supervision on duties and tasks. 10. Support Lean Activities.

Additional Functions: 1. Perform other duties as assigned.

Other Requirements: 1. Must be able to read and interpret blue prints. 2. Must be skilled in close tolerance work and have knowledge of use of special tools and equipment. 3. Must be able to use mathematical formulas by solving dimensional problems using fractions, decimal fractions and whole numbers. 4. Basic computer skills. 5. Must be able to read a scale and perform basic shop math. 6. Read and comprehend basic documents and instructions. 7. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. 8. Must demonstrate good housekeeping and safety practices. 9. Ability to work with composite resins and materials. 10. Must be able to lift 50 lbs. 11. Must be able to work any shift. 12. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas.

Languages Required (in addition to English): English
 
Job Location: Savannah, GA
Overtime: Possible
Start Date: ASAP
Input Date: 08/08/2018
Firm Name: INTERGEN GROUP
Attention: Cort Hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Controls Engineer- Equipment and tooling
Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.
(Not mandatory but good too in any of the below):
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: Asap
Input Date: 06/05/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design & Analysis Engineer 2- Mechanical

Description:
Mechanical System Design & Analysis Engineer 2

Location: Fort Walton Beach, FL
Duration: 6+ months

Description:
General Requirements:
Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs detail design development and modification of mechanical and fluid system installations. Performs spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Works under general supervision.

Specific Job Details:
This position is to support the resolution of issues encountered procuring spares for various military aircraft platforms. Evaluation of product specifications, contact and communication with suppliers, coordination with specialty organizations (Stress, Aero, Thermal, M&P) at remote sites will be a routine part of the job. Mechanical design skills such as familiarity with material properties, finish codes, strength of materials, machining and manufacturing processes will be required. Upon resolution of existing design issues drawing updates will be required in the form of Attached Drawing Change Notice (ADCN) or Engineering Change Orders (ECO). Employee will be required to generate and submit change documentation and follow through review to release. Familiarity with standard parts look up systems such as PSDS, Haystack, IHS is desired. Familiarity with client process and release system is also desired.

Education / Experience:
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.
Required:
Bachelor or Master degree from an accredited course of study, in engineering, com
 
Job Location: Fort Walton Beach, FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 06/25/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer



Location: Windsor Locks, CT (06096)


Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. May include utilization of computer aided design applications.

This position will be responsible for designing all tooling for (SLS) hardware and ensuring that the processes for tool design are followed.

Candidate will create tool designs working with the cognizant Manufacturing or Test Engineers.
Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
Must be able to review drawings and concepts and resolve producibility concerns.
Must be able work well in an integrated product development/ design environment.
Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
Desired experience should include development of tooling for complex mechanical systems, and components such as, heat exchangers, pumps, fans, & accumulators.
Candidate must have experience in the design of complex mechanical hardware or tooling.
Desired experience should include GD&T and ANSI Y14.5, ability to design for manufacturing simplicity and a strong understanding of technical blueprints.
The candidate must be proficient in CREO or similar Cad software. Experience with Windchill is a plus.


Education: Bachelor's Degree

US Citizen















Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54631
Job Location: Windsor Locks, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 08/07/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $39.00/HR
Duration: 1 year W2 contract
Shift: 1st Shift
Overtime: Possible (x1.5)
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST be proficient with CREO****

Job Description:
- Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
- May include utilization of computer aided design applications.

Requirements:
- This position will be responsible for designing all tooling for (SLS) hardware and ensuring that the processes for tool design is followed.
- Candidate will create tool designs working with the cognizant Manufacturing or Test Engineers.
- Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
- Must be able to review drawings and concepts and resolve producibility concerns.
- Must be able work well in an integrated product development/ design environment.
- Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
- Desired experience should include development of tooling for complex mechanical systems, and components such as, heat exchangers, pumps, fans, & accumulators.
- Candidate must have experience in the design of complex mechanical hardware or tooling.
- Desired experience should include GD&T and ANSI Y14.5, ability to design for manufacturing simplicity and a strong understanding of technical blueprints.
- The candidate must be proficient in CREO.
- Experience with Windchill is a plus.

Education:
- Bachelor's Degree
 
Job Number: 9640
Job Location: Windsor Locks, CT
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 08/06/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Job Description:
Manager specifically would like someone with ProCabling experience.
Assist in 3D modeling of planter systems and necessary integration onto planter main frame.
Create layout drawings necessary for production implementation.
Create detailed component/piece part prints as assigned which meet Client drawing standards.

Required Skills/Qualifications:
BS in Mechanical Engineering, Agricultural Engineering or equivalent years of experience and proficient with ProE/CREO and TeamCenter
Experience with off-highway vehicle design

Preferred Skills/Qualifications:
Working knowledge of planting equipment
1 year sub-system design and integration experience utilizing ProE/CREO
Familiarity with Client modeling and drawing standards
 
Job Number: 18-12786
Job Location: Burr Ridge, IL
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/31/2018
Firm Name: ICONMA LLC
Attention: Pratap Singh
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Creativity and latitude is expected.
Participate in a variety of process improvement projects.
Able to support design reviews with timely and relevant information and understanding.
Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

Design/Data Integrity Engineer

Description:
Design/Data Integrity Engineer in Structural/Mechanical Engineering for Completions Engineering. Responsibilities primarily involve engineering design, modeling, drafting, and checking of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, and seating installations. The engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation. At times this position may also be asked to review design work created using either AutoCAD or CATIA V5 and ensure design standards are consistent with company standards and accepted design methods. Engineering design work includes the creation of drawings/models using either AutoCAD or CATIA V5. Design engineer will employ design standards consistent with company standards and accepted design methods. Design assignments are executed under the direction of a Lead engineer or Group Head to meet the manufacturing schedule. Additional responsibilities are out lined in the job description and as assigned by the Lead or Structural/Mechanical Engineering Group Head. Experience as Design Checker/Data Integrity a plus.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs. specific technical discipline or fifteen (15) yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/11/2018
Last Updated: 11/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: andrew.walbert@aictalent.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Mechanical Engineer-Cabin Interiors

Description:
Design/Mechanical Engineer-Cabin Interiors
Savannah, GA
Rate: $55.00/HR

Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 8982
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/24/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Designer / Drafter

Description:
PDS Tech, Inc. is seeking a Designer/Drafter for an open position in Santa Fe Springs, CA
 
Responsibilities for this position include:
  • Developing and maintaining all Facility drawing packages.
  • Developing and maintaining system and sub-system drawing packages.
  • Developing and maintaining engineering manufacturing drawings associated with site.
  • Incorporating redlines into existing drawings in multiple CAD systems.
  • Working with minimal supervision after initial orientation.
  • Creating and revising site layouts, detailed parts, assemblies, and manufacturing engineering drawings from existing basic layouts, external references, and standard data residing in-house and in public databases to develop final drawings of site, devices, mechanical and piping (P&ID’s) utilizing computer-aided design (CAD).
  • Completing new and revision detailing of model designs into layout drawings possibly prepared by others in accordance with standard engineering drafting practices on site.
  • Determining scaling; inserts, necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning for parts, assemblies; preparing complete production detail drawings.
  • Contributing design modifications to improve quality of product or facilitate manufacturing operations.

Qualifications
  • High School Diploma with a minimum of 3 years Design/Drafting experience / Associates Degree with a minimum of 5 years Design/Drafting experience (preferred)
  • 2 – 5 years’ experience in Design/Drafting using Inventor 2015 version or higher
  • 2 – 5 years’ experience in Design/Drafting using Autocad 2015 version or higher
  • Full understanding of GD&T, version ASME Y14.5M-1994.
  • Experience with CADKEY 1999
  • Experience with NX 8.5.3 or higher
  • Experience with TeamCenter PLM system
  • Familiar with basic parametric modeling
  • Proficient in Office 2010 version or higher (Excel, Work, Outlook, Power Point)

 
Job Number: 1810087495
Job Location: Santa Fe Springs, CA
Per Diem: No
Duration: 12 months
Input Date: 06/11/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mXvIAAU&URLSource=cjhunter

Designer, Structures - Wing & Fuselage

Description:
PDS Tech is currently recruiting for a long term contract in Greensboro, NC for a Structures Engineer in Wing or Fuselage.
General Summary:

Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, E0s. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:

  • Generates engineering models, drawings, parts list and E0 utilizing CATIA V5
  • Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
  • Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
  • Familiarity with structural analysis methods, load paths, and material properties
  • Manages task execution to ensure on-time and on-target completion
  • Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
  • Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
  • Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
  • Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:



  • Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
  • Experience in primary and secondary structural design including Wing or Fuselage
  • Must possess a minimum of 2000 hours of experience with CATIA V5 

Knowledge, Skills and Abilities:

  • Knowledge of AMSE Y14.5 dimensioning and tolerancing
  • Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
  • Experience with Catia V5
  • Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
  • Proficient in Microsoft Office Products

Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50Ibs or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.

 
Job Number: 1810086435
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 07/24/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTmFAAU&URLSource=cjhunter

Designer, Structures - Wing & Fuselage

Description:
General Summary:
Structures Designer Engineering will serve in a design role and be responsible for conceptual design developing drawings and supporting documents i.e. parts list checklist, E0s. Will support design reviews and PDRs/CDRs.  This is a DIRECT position.

Duties and Responsibilities:

  • Generates engineering models, drawings, parts list and E0 utilizing CATIA V5
  • Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
  • Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
  • Familiarity with structural analysis methods, load paths, and material properties
  • Manages task execution to ensure on-time and on-target completion
  • Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
  • Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producibility
  • Working knowledge of metallic aircraft construction including primary structure, materials processes and tooling.
  • Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:



  • Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
  • Experience in primary and secondary structural design including Wing or Fuselage
  • Must possess a minimum of 2000 hours of experience with CATIA V5 

Knowledge, Skills and Abilities:

  • Knowledge of AMSE Y14.5 dimensioning and tolerancing
  • Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
  • Experience with Catia V5, TeamCenter
  • Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
  • Proficient in Microsoft Office Products

Physical Requirements:

  • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  • Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  • Read, hear, speak, and see with no restrictions, as required by job duties.
  • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  • Effectively communicate in Business English language.
  • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50Ibs or more during the work shift, with the use of Company provided "reach assistance technology" or "movement assist technology" (fork-lifts, pallet jacks, pulleys, dolly's, robotics reach equipment, people movers etc.), as required by job duties.

 
Job Number: 1810087974
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 07/03/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Lucinda Contreras
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002ma7HAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
The Designer/Drafter will be responsible for reverse engineering existing products for establishment of 3D CAD models and drawing documentation for the organization. There will also be a need to develop new product designs from concept through prototyping and ultimately production. This position will be utilizing CREO 4.0 and SolidWorks 2017 modeling software for these activities.

MAJOR JOB RESONSIBILITIES
Measure existing products from inventory and develop 3D CAD models for those items while also creating 2D drawing packages for their individual components.
Works closely with the Development Engineers to design new products for the category as well as designing product extensions, all at the direction of the Product Manager.

REQUIRED KNOWLEDGE, SKILLS, ABILITIES, & COMPETENCIES
Working knowledge of CAD 3-D Modeling software such as Creo 4.0 and SolidWorks 2017
Strong knowledge of the detailed design of components from metal tube bending, metal stamping, plastic molding, and polyester fabric manufacturing. Ability and desire to work cooperatively with others on a team
Ability to communicate effectively (both orally and written)
Ability to think in such a way as to produce new concepts or ideas
Ability to maintain a consistently high level of attention to detail, meeting aggressive project deadlines
Ability to comprehend complex technical topics and specialized information

REQUIRED QUALIFICATIONS

Education Requirements
Minimum 2-year technical degree; Engineering Technician or technical drafting/engineering preferred

Years of Relevant Work Experience
3+ years in a product development role utilizing 3-D modeling; consumer product experience a plus
Experience in a production environment including mechanical fabrication, finishing/painting, and packaging a plus

ENVIRONMENTAL/PHYSICAL REQUIREMENTS

Physical demands described here are representative of those that must be met to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.
This position is located primarily in an office environment, located next to a manufacturing plant. At times the associate is required to sit for long periods of time, but there are instances of working in the department's prototyping lab.
While performing the duties of this job, the associate may need the ability to lift and carry loads up to 20 pounds.
Upon occasion, the associate may be exposed to a manufacturing environment and required to wear personal protective equipment.
 
Job Number: 18-23713
Job Location: Watertown, CT
Rate: 50.00/hour
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 08/06/2018
Firm Name: NESCO RESOURCE
Attention: Michael Moritz
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Santa Fe Springs, CA
Rate: $29.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****

Description:
Designer/Drafter your roles and responsibilities will include the following:
- Develop and maintain all Facility drawing packages.
- Develop and maintain system and sub-system drawing packages.
- Develop and maintain engineering manufacturing drawings associated with site.
- Incorporate redlines into existing drawings in multiple CAD systems.
- Must work with minimal supervision after initial orientation.
- Creates and revises site layouts, detailed parts, assemblies, and manufacturing engineering drawings from existing basic layouts, external references, and standard data residing in-house and in public databases to develop final drawings of site, devices, mechanical and piping (P&ID’s) utilizing computer-aided design (CAD).
- Completes new and revision detailing of model designs into layout drawings possibly prepared by others in accordance with standard engineering drafting practices on site.
- Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning for parts, assemblies; prepares complete production detail drawings.
- Contributes design modifications to improve quality of product or facilitate manufacturing operations.


Qualifications:
Required:
- High School Diploma with a minimum of 3 years Design/Drafting experience
- 2 years Design/Drafting experience using Inventor 2015 version or higher
- 2 years Design/Drafting experience using Autocad 2015 version or higher
- Working knowledge of NX 8.5.3 or higher
- Familiar with basic parametric modeling
- Proficient in Office 2010 version or higher (Excel, Work, Outlook, Power Point)
- Good understanding of Basic GD&T, version ASME Y14.5M-1994.

Preferred:
- Associates Degree with a minimum of 5 years Design/Drafting experience
- 5 years drafting experience using Inventor 2015 version or higher
- 5 years drafting experience using Autocad 2015 version or higher
- Full understanding of GD&T, version ASME Y14.5M-1994.
- Experience with CADKEY 1999
- Experience with NX 8.5.3 or higher
- Experience with TeamCenter PLM system
 
Job Number: 10003
Job Location: Santa Fe Springs, CA
Rate: $29.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 10/23/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designers - Marine

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Looking to hire multiple Electrical, Structural, Outfitting, Piping, HVAC, and Mechanical Designers.
 
Job Number: 1
Job Location: Pascagoula, MS
Rate: $15-46/hr
Per Diem: No
Overtime: Yes
Duration: LT
Start Date: tba
Input Date: 07/31/2018
Firm Name: JERRY PITTMAN & ASSOCIATES INC
Attention: Kennon Barton
Address: P O BOX 5367
City, State: VANCLEAVE, MS 39565
Phone: 228/826-9255
800 Phone: 877/717-8104
Fax Phone: 228/826-9258
Website: www.jerrypittman.com

Digital Design Engineer

Description:
Are you looking for an exciting career opportunity as an Digital Design Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849

Description:  
Digital Design Engineer
 
Electrical Engineer to provide technical expertise and project planning support to develop new product lines and to support existing product lines.
 
This position requires experience interacting with customers and working in a team environment. 
 
Key Responsibilities:



  • Provide Digital Design and Analysis expertise utilizing experience and Simulation tools. 
  • Experience with VHDL design and development processes including simulation and validation of designs.
  • Provide design and analysis for EMI/EMC compliance
  • Provide leadership in and conduct activities associated with new product development as it pertains to design, documentation, and manufacturing and test support, to include engineering analysis, product design, drawing preparation, cost estimation, and product planning, as well as support of business development (marketing) activities.  
  • Provide leadership in and conduct activities associated with support of existing product manufacturing efforts as it pertains to design, documentation, and general support of inspection processes, manufacturing processes and test processes and cost reduction activities to include engineering analysis, product design, and drawing preparation.  
  • Provide technical support and guidance (mentoring) to junior engineers, to include review and critique of design documentation, development plans, test plans, and test results. 
  • Provide leadership of failure investigation activities through application of rigorous root cause analysis. 
  • Provide project support of Internal Research and Development (IRAD) activities, as well as providing engineering leadership and conducting design engineering tasks related to those activities. 
  • Assist in design and development of automated test equipment. 
  • Prepare reports and presentations related to design and development activities, including technical proposal submittals, test plans and reports. 

 
Qualifications:

  • Bachelor of Science Degree in Electronics Engineering discipline; Advanced degree a plus. 
  • Minimum of five years of experience in electronics design-related engineering position. 
  • Experience developing and integrating electronic assemblies into product designs preferred.  This includes leveraging the entire value chain from supplier through final factory manufacturing operations.  
  • Experience with DOE, FMEA, PFMEA, Six sigma or similar analysis tools. 
  • Experience with government specifications and industry standards related to safety critical electronics systems a plus. 
  • Experience in more than one Electrical Engineering concentration a plus, such as Digital, Firmware, and software. 
  • Advanced skill level in Microsoft Office (Word, Excel, Access, and PowerPoint). 
  • Intermediate skill level in Microsoft Project and Visio preferred. 
  • Advanced skill level in OrCAD Schematic Capture preferred. 
  • Advanced skill level in digital simulation and analysis.  
  • Demonstrated ability to apply mathematics, science, and technology in product design and complex problem solving 
  • Superior written and oral communication skills.

 
 This is a Direct Hire position with opportunity for growth! 




 
Qualifications:  
  • Bachelor’s Degree- Mechanical, Aerospace or Electrical Mechanical.  Advanced degree a plus
  • 5 years’ experience in design; preferably in related field.
  • Design experience- plan to production is a must. 
  • 2 years participation in cross functional team while developing products is preferred.
  • Presentation skills are required. 

 
Job Number: 1810089192
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfRcAAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Director of Engineering

Description:
POSITION SUMMARY:
Responsible for Global Engineering of charging products and services. This spans the range of charging solutions, including on/off vehicle, high power, industrial and laboratory. The role will collaborate with the global product team to ideate advanced solutions for target geographies and be responsible for the Engineering execution of projects to support growth initiatives. A strong, direct mentor to Engineering colleagues, this individual will inspire and lead product developments to maintain global market leadership, meet financial goals and drive organizational growth strategies.

DUTIES AND RESPONSIBILITIES:
• Provide hands-on technical and organizational leadership and mentoring to the cross-function, distributed Engineering team
• Lead multi-disciplinary R&D team of Electrical, Mechanical, Software, Systems development teams and Product Validation, Certification and Configuration Management functions
• Plan and allocate appropriate engineering resources for projects and provide scheduling, man-power, asset allocation, budgets and estimates to complete programs by deadline
• Work closely with Product Management and Global Leadership to define product strategy and requirements
• Establish engineering department goals, objectives, performance metrics, and initiatives to support corporate objectives.
• Ensures an engaged, innovative, and inspiring working environment be maintained by motivating, challenging, and coaching for personal growth, entrepreneurship, and customer engagement.
• Identify and develop new and emerging technologies as well as internal/external competencies required to be best in class.
• Develop and support new product launch activities by following and continuously improving new product introduction process. Develop and maintain “should cost” metrics for new designs, and ensure market competitiveness by meeting or beating product cost goals.
• Defines and drives accountability, consistency, quality, standardization and compliance across product development to ensure regulatory compliance and operational efficiency.
• Establish and maintain internal design review and release processes, and guidelines for product development and engineering designs.
• Ownership of regulatory compliance, and compliance portfolio of charging products
• Responsible to introduce customer specific applications, new products and product changes according to agreed timeline and global guidelines.
• Lead, train and support the team, to achieve their goals and objectives.
• Perform regular reviews with team members according the companies guidelines.
• Review and improve standards, best practices and procedures on a regular basis.
• Ensure legal requirements for NA market are met for products and applications

MINIMUM QUALIFICATIONS
• 5+ years track record of leading cross-functional Engineering organizations, developing leading products in competitive markets. Product development and launch experience for vehicle OEMs strongly preferred
• Experience leading broad engineering teams, with highly varied responsibilities and priorities in evolving, highly competitive markets. Proven success hiring and developing effective engineering teams
• Track record of planning and structuring of distributed teams to support business objectives
• Demonstrated success leading new product introductions with products utilizing electronic products and custom mechanical components.
• Experience in development and integration of local and networked communication technologies (eg WiFi, Bluetooth, Zigbee, cellular) and cloud services.
• Experience in working with outsourced manufacturers desired
• Experience leading new product developments through regulatory agency process (eg UL, VDE, CQC)
• Demonstrated record leading products through vehicle OEM product acceptance process

EDUCATION
• Bachelor’s Degree in Engineering, Master’s preferred

REQUIRED TRAVEL
• 10-30%

In addition to Knowledge cited in Director of Engineering, demonstrated knowledge of:
• 6-sigma tools and practices
• Project estimating and planning, bases of estimate
• Scrum and sprint techniques for development
• Design tools, eg SolidWorks, Altium, C++, LINUX
• Manpower planning and resourcing
• ISO14001/9001, IATF/TS16949 processes
 
Job Location: Monrovia, CA
Rate: Open
Duration: Permanent
Start Date: ASAP
Input Date: 08/09/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Doors Design Engineer

Description:
Responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.
 
Job Number: 28-027
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 05/25/2018
Last Updated: 11/14/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.
Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 367495
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 07/31/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router

Description:
EWIS 3-D Wire Router - Cabin Development

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
- 3D wire routing
- EWIS
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- Cabin interior monuments
- Seats

Education and Experience Requirements:
High School Diploma/GED required
 
Job Number: 9081
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router - Cabin Development

Description:
• In Cabin Development, we design, engineer and certify the next generation of cabin interiors.

Education/Skills
• Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
3D wire routing, EWIS, Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, Cabin interior monuments, Seats

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)
 
Job Number: 24-247
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/04/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Design Engineer

Description:
Are you looking for an exciting career opportunity as an Electrical Design Engineer?  Please reach out to Pam at:  pzack@pdstech.com or call her at 480.212.0849

Description:  
Analog Design Engineer
 
Experienced Electronics Engineer to provide technical expertise and project planning support to develop new product lines and to support existing group product lines with design engineering related functions.
 
This position requires experience interacting with customers and working in a team environment. 
 
Key Responsibilities:



  • Provide Analog Design and Analysis expertise utilizing Cadence Simulation tools. 
  • Provide leadership in and conduct activities associated with new product development as it pertains to design, documentation, engineering analysis, product design, drawing preparation, and Design Reviews as well as support of business development (marketing) activities.  
  • Provide leadership in and conduct activities associated with support of existing product manufacturing efforts as it pertains to design, documentation, and general support of inspection processes, manufacturing processes and test processes and cost reduction activities to include engineering analysis, product design, drawing preparation, cost estimation, and product planning.  
  • Provide technical support and guidance (mentoring) to junior engineers, to include review and critique of design documentation, development plans, test plans, and test results. 
  • Provide leadership of failure investigation activities through application of rigorous root cause analysis. 
  • Provide project design support of Internal Research and Development (IRAD) activities, as well as providing engineering leadership and conducting design engineering tasks related to those activities. 
  • Assist in design and development of manufacturing tooling and test equipment. 
  • Prepare reports and presentations related to design and development activities, including technical proposal submittals, test plans and reports. 
  • Support kaizen-related process improvement activities.

 
Qualifications:

  • Bachelor of Science Degree in Electronics Engineering; Advanced degree a plus. 
  • Minimum of five years of experience in design-related engineering position. 
  • Experience developing and integrating electronic assemblies into product designs preferred.  This includes leveraging the entire value chain from supplier through final factory manufacturing operations. 
  • Experience with EMI/EMC compliance. 
  • Experience with DOE, FMEA, PFMEA, Six sigma or similar analysis tools. 
  • Experience with government specifications and industry standards related to safety critical electronics a plus. 
  • Advanced skill level in Microsoft Office (Word, Excel, Access, and PowerPoint). 
  • Intermediate skill level in Microsoft Project and Visio preferred. 
  • Advanced skill level in Analog Simulation, preferably with Cadence PSPICE. 
  • Strong Analog background with High Power, High Voltage experience a plus. 
  • Experience performing Stress Analysis and Thermal Analysis.
  • Demonstrated ability to apply mathematics, science, and technology in product design and complex problem solving 
  • Superior written and oral communication skills.

 
 This is a Direct Hire position with opportunity for growth! 




 
Qualifications:  
  • Bachelor’s Degree- Mechanical, Aerospace or Electrical Mechanical.  Advanced degree a plus
  • 5 years’ experience in design; preferably in related field.
  • Design experience- plan to production is a must. 
  • 2 years participation in cross functional team while developing products is preferred.
  • Presentation skills are required. 

 
Job Number: 1810089190
Job Location: Hollister, CA
Duration: 0 months
Input Date: 08/01/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mfR8AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Must be able to acquire a clearance

•Programming experience with NI Lab View and Lab Windows software for integrated systems.
•Integration of automated test systems using COTS based VME/VXI/PXI/LXI/GPIB interfaces and equipment.
•Cradle or Doors requirements management experience (or comparable application)
•Proficient with Creo and Pro 5.0 (optional)
•Proficient with product lifecycle management software Wind chill 9.1
•Proficient in Zuken schematic capture software
•Very Good technical writing and verbal communication skills.
•Ability to present and communicate effectively to a broad technical community.
•Ability to work independently as well as a team setting.
•Mechanical interface design experience.
 
Job Number: 44911
Job Location: CO & TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 09/13/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Fabrication Technician

Description:
Qualifications and Education Requirements
Background in fabrication of electronic chassis, rack and cable assemblies, utilizing minimal documentation
Proficiency in soldering of connectors and minimal PWB component assemblies, crimping of connector pin assemblies
Ability to interpret schematic drawings, and mechanical drawings
Familiarity of electronic components such as switches, relays, diodes, etc
Familiarity with DMM’s and other basic electronic test equipment
Ability to perform basic checkout and troubleshooting of electronic components
Ability to use common hand tools for mechanical assembly and familiarity with fasteners
Basic PC applications knowledge preferred: MS Word, VISIO, MS Excel

We are looking for someone with fabrication experience with Racks, Rack Wiring, the chassis ( test boxes) we building for inside the box. This is a lot of assembly with minimal supervision and wiring in both connectors, and discrete electronic components and some PWB’s
****Seeking technician that can do fabrication of chassis/harness, rack assemblies. Not a factory environment, will be reviewing drawing/schematics to fabricate product. Should be able to work independently. There are team members available for reference, but looking for someone with strong fabrication skill to start with minimal training. Will also do certification work on assemblies, cables. During int. will ask about more complex fabrication work done. Ask about ability to troubleshoot fabrication work. Experience working in small teams(2-4 people)
 
Job Location: Dulles, VA
Rate: 40 & up
Per Diem: no
Overtime: possible
Duration: 6 mos
Start Date: ASAP
Input Date: 08/09/2018
Last Updated: 08/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Justin Taylor
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electro Mechanical Assembler

Description:
 
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
 PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
Job Number: 1710075032
Job Location: Redmond, WA
Duration: 12 months
Input Date: 10/09/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023KWVAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 11/14/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 11/14/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 2 FL

Description:
1666/162631
Engineer Manufacturing 2 (Job Number: 18015290)

Number of Openings: 1

Location(s):Florida-Melbourne

Target Start Date: Sep 24, 2018
Target End Date: Sep 20, 2019
Rate: $33-$38/hour

Shift: 1st Shift - 9/80

Clearance: No Clearance Required.

Position Summary

Responsibilities

•Maintains configuration of the aircraft to Engineering requirements
•Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
•Translates Engineering requirements into a product build package
•Collaborates with tool design on manufacturing requirements
•Controls the flow of parts
•Coordinates make vs. buy part decision
•Structures Manufacturing Bill of Material (MBOM)
•Defines sequence of operations and specifies procedures for product build
•Ensures manufacturing processes and procedures are in compliance with customer requirements
•Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
•Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
•Supports the build and test of product
•Clears constraints affecting production of aircraft
•Investigates and initiates corrective actions and improvements in product quality and efficiency
•Collaborates with tool design to ensure product build is repeatable
•Oversees the integration of aircraft assembly technologies and processes
•Provides technical solutions to a wide range of complex and difficult problems
•Experience integrating products from engineering design to manufacturing floor
•Provides detailed written instructions that help facilitate product fabrication

Basic Qualifications:

•Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, Industrial Engineering, or Electrical Engineering.
•2 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality


Preferred Qualifications:

•Experience reviewing and interpreting electrical wire diagrams
•Experience supporting aircraft hydraulic and/or fuel integration/maintenance
•Experience supporting enhancement processes that improve production shop floor efficiencies
•Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
•Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
•Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
•Experience supporting aircraft maintenance and/or flight test operations
 
Job Number: MB-1666
Job Location: Melbourne, FL
Rate: 33-38/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 07/30/2018
Last Updated: 09/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Engineer Mechanical (Aircraft Fuel Systems Design Engineer) Clearance

Description:
PDS TECH INC. is seeking Engineer Mechanical (Aircraft Fuel Systems Design Engineer) located in Melbourne,FL.  Contact Elisa Petersen for details at 316-448-0890 or send resume to epetersen@pdstech.com


Summary:
The successful candidate will have a demonstrated ability to design and integrate aircraft fuel subsystems, as well as a demonstrated ability to prepare build-to packages utilizing 3D modeling software.
Active DoD Secret clearance required to start.
Last investigation must be within the last 6 years Offer is contingent upon ability to obtain access to Special Programs (SAP).

 


Qualifications
 
Basic Qualifications: 
Minimum of 14 years’ experience directly related to aircraft subsystem design and integration, as well as proven engineering team leadership abilities.  Demonstrate experience with 3D modeling software (NX or equivalent). Active DoD Secret Clearance.

 
Preferred Qualifications:
Bachelor of Science degree is Aerospace, Mechanical, Electrical Engineering or Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university.  Experience with, NX and TeamCenter. Demonstrated ability to perform design utilizing tube routing functions within the NX software.
 
 
Job Number: 1810086188
Job Location: Saint Augustine, FL
Duration: 9 months
Input Date: 07/17/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mTBIAA2&URLSource=cjhunter

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

Engineers -- Midwest & Southeast Locations

Description:
PDS is looking for Many Engineers:

Looking for those with an Active Secret clearance or the ability to obtain clearance

Mid-Level & Sr Software Engineers
-Oklahoma City, OK and St Louis, MO

Mid-Level & Sr Stress Engineers
-Oklahoma City, OK; St Louis, MO; and Charleston, SC

Systems Engineers - Avionics or Mechanical exp
-Oklahoma City, OK

Structures Engineers (Degreed)
Structures Designers (non-degreed)
-Oklahoma City, OK and Charleston, SC

Paperless Hiring, Paperless Weekly Pay, Direct Deposit, Holiday & Longevity Pay, Customizable Benefits, Identity Theft Protection, 401(k) Immediate Enrollment
 
Job Location: Midwest & Southeast
Input Date: 07/17/2018
Firm Name: PDS TECHNICAL SERVICES
800 Phone: 855/205-5824
Email: aircraftengineerjobs@pdstech.com
Website: www.pdstech.com

Equipment & Tool Engineer 4 (2) - CA

Description:
Chipton Ross is seeking 2 Equipment & Tool Designer 4's for a contract assignment in Seal Beach, CA.

RESPONSIBILITIES:
Supports the computer-aided design (CAD) development and documentation of mechanical, hydraulic , propulsion and flight controls Maintenance Ground Operations Systems (MGOS) ground support equipment (GSE) tooling design. Supports the development, testing and/or modification of GSE systems, components and installation designs/drawings to provide design documentation to downstream groups. Profficient with Geometric Tolerancing and Drawing Release (PDM / ENOVIA).Generates GSE CAD 3-D models (in CATIA V5) and documents analyses to validate and verify GSE and components meet requirements and specifications. Produces First Pass Quality (FPQ) GSE designs and drawings per MGOS standards, processes and Desk Instructions. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 4:00 PM

TRAVEL: YES
 
Job Number: 170895
Job Location: Seal Beach, CA
Rate: $DOE
Duration: 9 Months
Input Date: 06/09/2018
Last Updated: 11/14/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 10/08/2018
Last Updated: 10/12/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Maintenance Engineer – Level 3

Description:
Location: Vandenberg Air Force Base, CA
Rate: DOE
Duration: 1 year contract
Shift: Not Specified
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description / Responsibilities:
The Facility Maintenance Engineer will support the maintenance and restoration of launch facilities in support of the Atlas V Launch Operations at Vandenberg Air Force Base California as part of our clients Engineering and Infrastructure Team. The successful candidate will provide management of all SLC-3 / Atlas V and other support facility activities, consisting of periodic maintenance and repair of launch facility and support building architectural, electrical, civil, structural and mechanical systems, including supporting facility corrosion control activities. Activities are performed by both contractor and company represented employees.

Candidate will coordinate the procurement of facility services, equipment, and furniture and perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance. Candidate will perform investigation of anomalies encountered by maintenance personnel and be responsible for developing a corrective action plans and work documents for both company and contractor support. Will work with various government groups including Air Force and Base Civil Engineering personnel. Will specify and order various types of facility equipment.

The successful candidate shall prepare and obtain approval for Statements of Work with detailed contractor direction and manage contractor's activities for facility corrosion control, repair of building architectural systems, miscellaneous civil, structural and mechanical repairs for maintenance and repairs that are performed by external contractors.

In addition, the candidate will gather information, perform field walk-downs, and create, schedule, and manage the performance of maintenance and/or corrective Work Orders performed by Company represented personnel. Support will also include schedule integration and coordination of maintenance activities around launch processing activities. Candidate shall have relevant facility maintenance with an emphasis on architectural facility/building systems restoration and corrosion control.


Qualifications/Education:
- Bachelor's degree from an accredited college in Engineering or related discipline, or equivalent, with 10 years of professional experience.
- Experience with facilities engineering and plant operations.
- Experience working independently and in a team environment, with both represented and contractor personnel.
- Must have excellent communication, writing, and oral skiffs and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
- Ability to solve practical problems.
- Able to analyze and interpret data to make sound judgments and recommendations.
- Ability to read and interpret mechanical and electrical drawings, logic diagrams, and technical manuals.
- Basic experience with AutoCAD, create/revise engineering drawings as required.
- Proficient knowledge in Microsoft Office Suite.
 
Job Number: 8970
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Flammability Engineer

Description:

PDS Tech is seeking a Flammability Engineer for an open position in Mobile, AL

Position Summary: 



The Flammability Engineer will support Company cabin and cargo engineering team in the review and approval of interior engineering flammability data in support of major and minor changes to aircraft type design



Primary Responsibilities: 



  • Ensure aircraft type design complies with type certification requirements for cabin and cargo material flammability requirements.
  • Generate certification plans and support the creation of compliance statements in support of major projects.
  • Provide solutions to issues arising during certification projects and provide status to Management on these key issues.
  • Coordinate with suppliers during development phase of the equipment to ensure that compliance to Company requirements are satisfied. 
  • Define the certification requirements to support aircraft modification in accordance with customer's request.
  • Review and approve Airbus internal and vendor test plans and reports, including witnessing testing as required.
  • Ensure that the design can be certified and all the necessary data for test and certification is produced.
  • Provide input and feedback on matters pertaining to certification between equipment suppliers, customers and Airbus engineering organizations.
  • Generate reports as required. Reviews and approves suppliers compliance reports.
  • Create and ensure that the engineering is robust and meets integrated project requirements. 
  • Perform other tasks as assigned


Experience / Skills / Training: 



  • Clear and in-depth knowledge of FAA, European and other Foreign National Authority aircraft certification regulations pertaining to Part 23 and 25 cabin interior and flammability requirements.
  • A good understanding of the Part 23 or 25 certification process (TC & STC), regulations, orders, notices and policies.
  • Minimum of 10 years in aviation or 5 years in aircraft compliance experience, specifically cabin and/or passenger to freighter.
  • Ability to write reports and technical memorandums.
  • Strong liaison with other departments both internally and internationally.


Education / Special Qualifications: 



  • Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering preferred.

  • Position requires in-depth knowledge of Engineering Mechanics and Strength of Materials.
  • Good leadership and communication skills.
  • Minimum of 5 years in cabin or cargo compartment stress analysis.
  • Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
  • Familiar with FAA/EASA Aircraft regulatory requirements.
  • Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools


Education / Special Qualifications:
5 years of aircraft certification experience and 3 years flammability certification experience. 
Bachelor’s in Engineering and Part 23 or 25 certification process understanding.

 

 


Travel:



Up to 10% business travel.

 



Essential Functions:   



  • Vision: able to see and utilize computer screens; able to move through office and from point to point to find specific co-workers and in-house experts.
  • Hearing: able to hear in normal conversations and respond to warnings and signals.
  • Speaking:  able to participate in normal business conversations.
  • Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors): able to operate standard office equipment and utilize electronic id to enter building
  • Carrying: able to carry up to 20 lbs./9kg. when transporting documents, printer paper and similar items.
  • Lifting:  able to lift up to 20lbs/9kg. on occasion.
  • Pushing / Pulling: able to push/pull office chairs and pieces of equipment
  • Sitting:  able to sit for extended periods of time in front of a computer terminal while writing bulletins or participating in meetings
  • Squatting / Kneeling:  able to occasionally able to squat/kneel to access items stored on low shelving
  • Standing: able to stand for long periods of time in meetings and discussions
  • Travel:  able to travel through office/work complex and occasionally within US for business meetings.
  • Walking (include routine walking such as to a shared printer to retrieve documents):  able to walk through office and production areas sometimes on uneven surfaces to reach meetings, visitors and direct others to meetings.

 
Job Number: 1810087122
Job Location: Mobile, AL
Duration: 6 months
Input Date: 07/19/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mWhoAAE&URLSource=cjhunter

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
 
Job Number: CT43652
Job Location: Windsor Locks, CT, CT
Rate: 67.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 07/27/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GROUND TEST LABORATORY TECHNICIAN

Description:
Engineering Ground Test Laboratory Technician

Stratford, CT

15+ Months Contract Opportunity

Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.

Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
Must be able to work from elevated work platforms at various heights.
Must be willing and able to work in inclement weather.
Must be capable and comfortable working within a diverse team environment.
Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 365895
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 06/12/2018
Last Updated: 08/03/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Product Design Engineer 4 / CREO / CA

Description:
18000483/162029
Job Title: Ground Product Design Engineer 4
Job Category: Engineering

Work Site: Redondo Beach, CA 90278
Job Number: 1657
Max Pay Rate: 67.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract


Job Summary
Northrop Grumman is currently seeking a Design Engineer to support test set development for EPS-R. Position will require selected candidate to create, modify and maintain drawings of electrical test equipment which includes, but not limited to custom test units, custom drawers and test cables. The selected candidate will be responsible for drawing documentation, design updates and working with mechanical and electrical engineers. Selected candidate must be adept at working independently as well as in a collaborative team environment. Candidate should be able to communicate well verbally and written, and be attentive to detail.

Job Description

Qualifications and Education Requirements
•Minimum 5 years of experience working in industry
•Experienced in ProE/CREO
•Knowledge with electro-mechanical design/products

Preferred Skills
Clearance

•AutoCAD
 
Job Number: MB-1657S
Job Location: Redondo Beach, CA
Rate: 67/hr max
Per Diem: no
Duration: 12 months
Input Date: 07/25/2018
Last Updated: 09/17/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Mechanical Engineer – Level 3

Description:
Location: Vandenberg AFB, CA
Rate: DOE
Duration: 1 year contract
Shift: Not Specified
Overtime: Exempt
Per Diem Split: Yes (if eligible)

Job Description:
- The candidate will provide engineering support to include design, operation and maintenance of ground (fixed and portable) ECS/HVAC systems used at all Company VAFB Launch Sites and support facilities.
- Primary assignment is mechanical engineering support of design modifications, launch processing operations and system maintenance for VAFB Atlas V SLC-3E, Delta II SLC-2, and Delta IV SLC-6.
- Additional duties will include mechanical design engineering support of launch site ECS/HVAC modifications and other major facility modifications and/or systems upgrades.

Tasks will include the following:
- Develop new and revise existing operational test procedures and maintenance documentation associated with the launch vehicle ECS and facility HVAC systems to meet customer requirements.
- Serve as engineer responsible for disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions.
- This will include management of facility projects to ensure effective and timely technical integration and implementation.

Education/Experience Required:
- Bachelor of Science from an accredited college in Mechanical Engineering or equivalent experience, with a minimum of 10 years of professional experience; or 5 years of professional experience with a related Masters degree.
- The successful candidate should have experience constructing, modifying and/or operating facility ECS/HVAC systems for space launch facilities and/or heavy industrial facilities.
- Experience with industrial process heating, refrigeration and air-conditioning systems and equipment is essential.
- This position requires competent knowledge of facility ECS/HVAC systems, mechanical engineering design, CAD practices as well as a sound practical (hands-on) knowledge of engineering principles, practices, and industry standards.
 
Job Number: 9253
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Engineer III

Description:
Roles and Responsibilities
Hydraulic Engineer III - Ogden, UT

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core aerospace hydraulic actuation products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met, including program scope, cost and schedule constraints.


Essential Functions:

1. Develops conceptual and detailed product specifications by analyzing performance and customer requirements. Investigates design factors such as function, materials, performance, interchangeability, cost (non recurring and recurring), operational efficiency, and contractual requirements. May develop preliminary designs from customer input and descriptive information provided by others.
2. Performs feasibility and trade studies applying standard analytical methods; recommends solutions which are defined and reviewed for implementation.
3. Interprets and validates test results for accuracy and precision. Ensures conformance to product qualification procedures and parameters to achieve customer and product reliability and safety standards. May utilize and interpret predictive models to simulate and verify design concepts.
4. Provides technical information for review with product engineering teams using established engineering practices, standards, and documentation methods (e.g. structured design process; customer design reviews). Writes supporting documentation for procedures and technical reports; may assist in writing technical proposals for customers.
5. Contributes to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; define data structure, interfaces and programming logic; analyze material requirements; research customer data item requirements).
6. Reviews product specifications to ensure clarity, completeness, form, fit, function, and conformity to standards and procedures. Identifies design errors, omissions, and other deficiencies, and recommends revisions, engineering change orders, and improvements to engineering management or the project team.

Qualifications and Education Requirements

• Bachelor's degree (BS) (or Professional Engineer (PE) certificate) in mechanical or aerospace engineering discipline.

• Ability to perform the essential functions of the job typically acquired through 4 to 6 years of related experience.

• Has thorough knowledge of hydraulic actuation product area and domain and develops breadth of knowledge of aerospace industry practices, techniques, regulations, and policies.

• Proficient with engineering design and analysis tools (e.g. computer aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

• Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.

• Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

• Proficient with standard project management tools and practices

• Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: KM0022
Job Location: Ogden, UT
Rate: OPEN
Per Diem: No
Duration: 6 months
Input Date: 08/01/2018
Last Updated: 08/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Engineer III / no clearance UT

Description:
5761/162672
Engineer III (Hydraulic Engineer III)


Work Site: Ogden, UT 84404

Start Date: 8/6/18
End Date: 2/6/19

Hydraulic Engineer III - Ogden, UT

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core aerospace hydraulic actuation products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met, including program scope, cost and schedule constraints.


Essential Functions:

1. Develops conceptual and detailed product specifications by analyzing performance and customer requirements. Investigates design factors such as function, materials, performance, interchangeability, cost (non recurring and recurring), operational efficiency, and contractual requirements. May develop preliminary designs from customer input and descriptive information provided by others.
2. Performs feasibility and trade studies applying standard analytical methods; recommends solutions which are defined and reviewed for implementation.
3. Interprets and validates test results for accuracy and precision. Ensures conformance to product qualification procedures and parameters to achieve customer and product reliability and safety standards. May utilize and interpret predictive models to simulate and verify design concepts.
4. Provides technical information for review with product engineering teams using established engineering practices, standards, and documentation methods (e.g. structured design process; customer design reviews). Writes supporting documentation for procedures and technical reports; may assist in writing technical proposals for customers.
5. Contributes to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; define data structure, interfaces and programming logic; analyze material requirements; research customer data item requirements).
6. Reviews product specifications to ensure clarity, completeness, form, fit, function, and conformity to standards and procedures. Identifies design errors, omissions, and other deficiencies, and recommends revisions, engineering change orders, and improvements to engineering management or the project team.

Qualifications and Education Requirements

• Bachelor's degree (BS) (or Professional Engineer (PE) certificate) in mechanical or aerospace engineering discipline.

• Ability to perform the essential functions of the job typically acquired through 4 to 6 years of related experience.

• Has thorough knowledge of hydraulic actuation product area and domain and develops breadth of knowledge of aerospace industry practices, techniques, regulations, and policies.

• Proficient with engineering design and analysis tools (e.g. computer aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

• Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.

• Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

• Proficient with standard project management tools and practices

• Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: JK-5761
Job Location: Ogden, UT
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 10/19/2018
Last Updated: 10/26/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Engineer III / no clearance CA

Description:
162632/5759
Hydraulic Engineer III
Irvine, CA
50-60/hr
6 months

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core aerospace hydraulic actuation products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met, including program scope, cost and schedule constraints.


Essential Functions:

1. Develops conceptual and detailed product specifications by analyzing performance and customer requirements. Investigates design factors such as function, materials, performance, interchangeability, cost (non recurring and recurring), operational efficiency, and contractual requirements. May develop preliminary designs from customer input and descriptive information provided by others.
2. Performs feasibility and trade studies applying standard analytical methods; recommends solutions which are defined and reviewed for implementation.
3. Interprets and validates test results for accuracy and precision. Ensures conformance to product qualification procedures and parameters to achieve customer and product reliability and safety standards. May utilize and interpret predictive models to simulate and verify design concepts.
4. Provides technical information for review with product engineering teams using established engineering practices, standards, and documentation methods (e.g. structured design process; customer design reviews). Writes supporting documentation for procedures and technical reports; may assist in writing technical proposals for customers.
5. Contributes to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; define data structure, interfaces and programming logic; analyze material requirements; research customer data item requirements).
6. Reviews product specifications to ensure clarity, completeness, form, fit, function, and conformity to standards and procedures. Identifies design errors, omissions, and other deficiencies, and recommends revisions, engineering change orders, and improvements to engineering management or the project team.


Qualifications:

• Bachelor's degree (BS) (or Professional Engineer (PE) certificate) in mechanical or aerospace engineering discipline.

• Ability to perform the essential functions of the job typically acquired through 4 to 6 years of related experience.

• Has thorough knowledge of hydraulic actuation product area and domain and develops breadth of knowledge of aerospace industry practices, techniques, regulations, and policies.

• Proficient with engineering design and analysis tools (e.g. computer aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

• Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.

• Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

• Proficient with standard project management tools and practices

• Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: JK-5759
Job Location: Irvine, CA
Rate: 50-60/hr
Per Diem: no
Duration: 6 months
Input Date: 10/22/2018
Last Updated: 10/26/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 11/14/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer III

Description:
Position Summary: This role requires an understanding of manufacturing concepts, methods & procedures. Primary roles and responsibilities include: product flow and shop floor optimization, constraint management applications, crew plan development, labor hour forecasting, critical path analysis, capacity analysis, schedule development and mitigation planning, staffing analysis and process improvement initiatives. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

Work with Process Engineering to generate should costs for manufacturing processes of customer parts.
Create capacity models of department and machine.
Participate in cross functional problem solving team working with direct labor solving problems brought up from the floor.
Calculate labor estimates from historical manufacturing data and understanding of engineering drawings, bills of material, mechanical and soldering assembly processes, equipment and tooling, and Lean Six Sigma.
Carry out cycle time reviews (direct labor productivity) and validation, to participate in process improvement projects that improve product cost, delivery and cash.
Will be expected to work with and communicate to the direct business unit as well as to cross functional teams (engineering, quality, materials, contracts and manufacturing) to support cycle time reductions and on-time delivery improvements.
Optimize manufacturing process incorporating Environmental Health and Safety / Ergo improvements.
Complete projects to increase process efficiency and reduce manufacturing cycle times.
Perform other duties as required.

Qualifications & Skills Requirements:

Bachelor's degree in Industrial, mechanical, or related field.
Minimum of 10 years of experience in Manufacturing and / or Industrial Engineering or equivalent.
Strong analytical skills (specifically Excel, Minitab or other statistical analysis software).
Strong oral and written communication skills.
Enterprise Resource Planning system awareness, specifically Visual is also desired, but not required.
Strong interpersonal and leadership skills.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to lift and/or move up to 10 pounds. Will need to be able to move throughout the office or production facility and communicate with other employees and management. Work will be performed in an office and production facility environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Systems Design Engineer

Description:
Description:
Lead the effort to create a top tier integration and test facility including procurement of all necessary hardware, tools, and equipment
Lead and empower your team to test and integrate a novel electric aircraft
Develop testing methods and procedures
Execute tests and document test results
Own the vehicle integration
Assist the engineering team and flight test team as required
Maintain records of components, installation procedures, and changes in accordance with standard quality procedures
Effectively communicate engineering intents with your team and integration issues with engineering
Assist with tracking milestone accomplishments including integration status
Requirement:
Experience designing an integrating a variety of aircraft systems - hydraulic, electrical, fuel, ECS, flight controls, etc.
VTOL experience a plus
Experience with light aircraft preferred.
Experience with CAD - Catia V5, NX, etc.
Familiarity with measurement systems, equipment, and sensors
A strong technical understanding of aircraft integration, testing, and quality control
A high degree of understanding of proper practice and safety in working with high voltage electronic systems
At least five years of engineering experience
Experience in a rapid prototyping environment
Excellent communication skills (strong coordination and relational skills to deal with customers, authorities, internal and external partners)
Experience with leading diverse teams
A Bachelor's degree in a relevant subject or equivalent experience - Aerospace, Mechanical, etc.


The Structures Company is an AA/EOE.
 
Job Number: 230
Job Location: ORE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 09/17/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Designers (Aircraft) - Canada

Description:
Leading aircraft company are seeking experienced Designers to produce interface and installation drawings for their latest aircraft's interiors. Duties will include:-

* Produce Aircraft interface and installation drawings of interior components (cabin shell items, lavatories, galleys, wardrobes, storage modules, seats and more) while interacting with other groups like stress, integration, methods, production and interior suppliers.
*Review of designs with interpretation of industry regulatory requirements and design practices.
* Support suppliers and production personnel.

For these positions the client is looking for the following skills/experience:-

* Technical degree in Aeronautical or Mechanical Engineering
* at least 5 years of relevant experience within the aerospace industry
* Knowledge of CATIA V5, Enovia is required

Initial contracts will be at least 6 months in duration with the strong likelihood of further work beyond this.
 
Job Number: JO0000000162
Job Location: Canada
Rate: to CAD$80/hour
Per Diem: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 08/06/2018
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Landing Gear and Hydraulic Systems. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as a primary interface within the Landing Gear and Hydraulic Systems group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related aviation engineering experience designing mechanical systems; experience can be used in lieu of education
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.

The Structures Company is an AA/EOE.
 
Job Number: 218
Job Location: Greensboro, NC
Rate: Up to $60.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 09/10/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB Engineer / Product Review Engineer III - (AL)

Description:
• Develops dispositions for previously fielded, unserviceable items utilizing Interactive Electronica Technical Manuals (IETM), Depot Maintenance Work Repairs (DMWRs), engineering drawings and/or process specifications.
• Applies broad knowledge of Boeing design and/or engineering principles.
• Develops and implements product/process improvements.
• Communicates engineering serviceability issues with Integrated Product Teams (IPT) and participating in design reviews.
• Uses innovative approaches and unique applications to address complex unserviceable conditions and to detect deviations.
• Utilizes basic static strength analysis to design interim and/or structural repairs.
• Analyzes reported problems for potential safety issues; recommends and manages complex resolution.
• Leads development of interim and final dispositions.
• Represents the engineering community in the build through post production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Supports supplier activities for on-site disabled product repair teams.
• Ensures supplier and build partner compliance with Boeing standards.


This position requires direct engineering support at an off-site supplier for the depopulation efforts which remove previously fielded (used) major assemblies, sub-assemblies, and detail components from the Apache rotorcraft. They are inspected and dispositioned with the intent of repairing/restoring to a serviceable condition; these items are then modified by the primary integrator (Boeing-Mesa), then re-installed on the aircraft. The components vary in terms of the state of serviceability, and component type; they consist of both primary and secondary, metallic and composite bonded structures, pneumatic and hydraulic systems, flight safety related components, and armament sub-systems.

Preferred Qualifications:
• Previous Material Review Board (MRB) experience preferred.
• Universal Product Review (UPR) preferred
• Previous experience with Depot Maintenance Work Requirement (DMWR) and/or Interactive Electronic Technical Manual (IETM) highly desired.
• Ability to learn in a fast-paced environment.
• Ability to collaborate with other engineers (both face-to-face, and via remote correspondence) and factory-floor mechanics.
• Develop and implement product/process improvements.
• Develop customer correspondence for continued safe operation and maintenance of equipment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification, or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Bachelor, Master or Doctorate of Science degree from an accredited course of study in Mechanical, Aerospace / Aeronautical, Civil, or Electrical engineering. ABET is preferred.
 
Job Number: MRBal
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10-12+ Months
Start Date: ASAP
Input Date: 07/17/2018
Last Updated: 08/10/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 09/12/2018
Last Updated: 10/01/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 CA

Description:
8120386
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2

Duties:



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEER AEROSPACE


State/Province: California
City/Town: Canoga Park
Address: 8900 Desoto Ave

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386ATO
Job Location: Canoga Park, CA
Rate: 50-66/hr max
Per Diem: no
Duration: 6 months
Input Date: 09/11/2018
Last Updated: 10/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP &P Engineer 4

Description:
MP&P Engineer 4

Location: Huntington Beach, CA
Duration: 6 months

Description:
This position requires a candidate with experience in parts management & component engineering of electrical, electronic, & electro-mechanical (EEE) parts used in space, man-space, launch vehicle, missile, Navy shipboard navigation and sensors, and military & commercial aircraft applications.

This position also requires some knowledge in the failure mechanisms of EEE parts, the use of plastic encapsulated microcircuits/devices (PEMs & PEDs) and automotive grade AEC parts qualified for high-rel military and space applications. Lab experience in failure analysis of EEE parts is a plus.

Responsibilities include the following:
- Lead teams
- Project management of parts, materials, and process (PM&P) tasks
- Develop & maintain PM&P plans for EEE parts and electrical materials & processes (M&P)
- Support the electrical design engineer in the part selection process and reviewing the parts list to ensure requirement compliance to the PM&P plan
- Develop & maintain specifications including screening & qualification plans
- Review & approve screening data & qualification conformance inspection (QCI) reports and destruct physical analysis (DPA) reports
- Develop & maintain non-standard part approval requests (NSPAR)
- Coordinate with component engineering subject matter experts (SMEs) in the development & qualification of complex EEE parts
- Provide subcontractor oversight compliance in review and approval of PM&P plans, part lists, NSPARs, part specifications, qualification plans, & part derating reports
- Perform GIDEP reviews, part obsolescence assessment & resolution, & part counterfeit mitigation assessments
- Manage part failure resolution and coordinate with electrical failure analysis lab to determine root cause of failure & corrective action
- Support design reviews & equipment buy-off (FCA/PCA)

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
6B2-Electrical PM&P
 
Job Number: 18-12571
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 07/26/2018
Last Updated: 08/14/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

MP&P Engineer 3 - CA

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Huntington Beach, CA

RESPONSIBILITIES:
Parts Manager/Components Engineer - Manage the electrical, electronic, and electro-mechanical (EEE) parts and components including subcontractor oversight of EEE parts and components for the PAC-3 Program. Position requires a strong track record in communication with program management, customers, and subcontractors outside of Client. The position also requires controlling PMP product specifications, subcontractors parts management control plans, and DMSMS part management plans, lead teams in assessing applications, qualifications, evaluate/approve replacement EEE parts and components including qualification of plastic encapsulated microcircuits (PEMs), technology insertion, life cycle cost and parts obsolescence assessments/solutions, developing non-standard parts approval requests (NSPARS) for new part additions and assessing derating exceptions. The parts manager will have authority regarding all technical PMP dispositions. The parts manager is expected to integrate technical, value, safety, and HAZ-MAT considerations of EEE parts and components into product definition to comply with Client, customer, and government requirements. The parts manager will be the prime interface with the customer on parts, materials and process concerns and lead initiatives to improve/develop PMP control processes in the absence of existing procedures for the PAC-3 Program as well as for the Client enterprise PM&P Engineering Function. The parts manager will support with the PAC-3 PMPCB Chairman and work with parts managers/component engineers as well as other members of the PAC-3 Program team to define/implement engineering solutions to meet organization objectives. The parts manager will also work with the PAC-3 reliability, quality, configuration management, and logistics team to implement the PAC-3 Program PMP practices across the program in a cost efficient manner while maintaining contractual standards.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

WORK HOURS:
Full-Time/First Shift
8 AM - 4 PM

MISCELANEOUS:
Travel Required-Travel to EEE Part manufacturer's local and domestic travel on occasion.

 
Job Number: 168068
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 MONTHS
Input Date: 01/22/2018
Last Updated: 11/14/2018
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

MP&P Engineer 3 - LA - SS

Description:
Chipton-Ross is seeking a MP&P Engineer for an opening in New Orleans, LA.

RESPONSIBILITIES:
This position is for a Materials, Processes and Physics Engineer Level 3 supporting the SLS program in New Orleans, Louisiana performing engineering and technical activities. The engineer will develop and execute plans to ensure business, technical, and customer requirements are achieved. The team will be responsible for activities including development and implementation of SLS specific processes, NASA-6016 requirements, review supporting engineering
documents, support supplier surveys and technical interchange meetings, provide liaison engineering support, and support material selection for subsystem /end item design concepts, coordination of MUIL/MUA.

REQUIRED EXPERIENCE:
MRB Experience a plus. Experience in a Materials, Process & Physics. Experience in contamination control, mechanical assembly, welding, orbital tube welding, adhesives, sealants, Thermal Protection Systems, wire harness routing and troubleshooting, metallurgy a plus.

EDUCATION:
Accredited Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree
with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/2ND SHIFT
WORK HOURS: 2:00 PM - 10:30 PM

TRAVEL: YES - 10%

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.
 
Job Number: 168082
Job Location: New Orleans, LA
Rate: $DOE
Duration: 12 Months
Input Date: 01/23/2018
Last Updated: 11/14/2018
Firm Name: CHIPTON ROSS
Attention: Johnnie Barrientos
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: jbarrientos@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 4

Description:
seeking 2 MP&P Engineer 4 's for an opening in Huntington Beach, CA.

RESPONSIBILITIES:
This position requires a candidate with experience in parts management & component engineering of electrical, electronic, & electro-mechanical (EEE) parts used in space, man-space, launch vehicle, missile, Navy shipboard navigation and sensors, and military & commercial aircraft applications.This position also requires some knowledge in the failure mechanisms of EEE parts, the use of plastic encapsulated microcircuits/devices (PEMs & PEDs) and automotive grade AEC parts qualified for high-rel military and space applications. Responsibilities include the following:
• Lead teams
• Project management of parts, materials, and process (PM&P) tasks
• Develop & maintain PM&P plans for EEE parts and electrical materials & processes (M&P)
• Support the electrical design engineer in the part selection process and reviewing the parts list to ensure requirement compliance to the PM&P plan
• Develop & maintain specifications including screening & qualification plans
• Review & approve screening data & qualification conformance inspection (QCI) reports and destruct physical analysis (DPA) reports
• Develop & maintain non-standard part approval requests (NSPAR)
• Coordinate with component engineering subject matter experts (SMEs) in the development & qualification of complex EEE parts
• Provide subcontractor oversight compliance in review and approval of PM&P plans, part lists, NSPARs, part specifications, qualification plans, & part derating reports
• Perform GIDEP reviews, part obsolescence assessment & resolution, & part counterfeit mitigation assessments
• Manage part failure resolution and coordinate with electrical failure analysis lab to determine root cause of failure & corrective action
• Support design reviews & equipment buy-off (FCA/PCA)

REQUIRED EXPERIENCE:
Lab experience in failure analysis of EEE parts is a plus.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

TRAVEL: YES
Some travel required to support design reviews and visit suppliers within the continental US.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 172801
Job Location: Huntington Beach, CA
Rate: $73.45 - 85.45
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 08/06/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 4

Description:
MP&P Engineer 4

Location: Huntington Beach, CA
Duration: 6+ months

Description:
This position requires a candidate with experience in parts management & component engineering of electrical, electronic, & electro-mechanical (EEE) parts used in space, man-space, launch vehicle, missile, Navy shipboard navigation and sensors, and military & commercial aircraft applications.

This position also requires some knowledge in the failure mechanisms of EEE parts, the use of plastic encapsulated microcircuits/devices (PEMs & PEDs) and automotive grade AEC parts qualified for high-rel military and space applications. Lab experience in failure analysis of EEE parts is a plus.

Responsibilities include the following:
- Lead teams
- Project management of parts, materials, and process (PM&P) tasks
- Develop & maintain PM&P plans for EEE parts and electrical materials & processes (M&P)
- Support the electrical design engineer in the part selection process and reviewing the parts list to ensure requirement compliance to the PM&P plan
- Develop & maintain specifications including screening & qualification plans
- Review & approve screening data & qualification conformance inspection (QCI) reports and destruct physical analysis (DPA) reports
- Develop & maintain non-standard part approval requests (NSPAR)
- Coordinate with component engineering subject matter experts (SMEs) in the development & qualification of complex EEE parts
- Provide subcontractor oversight compliance in review and approval of PM&P plans, part lists, NSPARs, part specifications, qualification plans, & part derating reports
- Perform GIDEP reviews, part obsolescence assessment & resolution, & part counterfeit mitigation assessments
- Manage part failure resolution and coordinate with electrical failure analysis lab to determine root cause of failure & corrective action
- Support design reviews & equipment buy-off (FCA/PCA)

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
6B2-Electrical PM&P
 
Job Location: Huntington Beach, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 07/26/2018
Last Updated: 08/24/2018
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

MP&P Engineer 4 (1) - CA - O/M

Description:
Chipton-Ross is seeking 2 MP&P Engineer 4 's for an opening in Huntington Beach, CA.

RESPONSIBILITIES:
This position requires a candidate with experience in parts management & component engineering of electrical, electronic, & electro-mechanical (EEE) parts used in space, man-space, launch vehicle, missile, Navy shipboard navigation and sensors, and military & commercial aircraft applications.This position also requires some knowledge in the failure mechanisms of EEE parts, the use of plastic encapsulated microcircuits/devices (PEMs & PEDs) and automotive grade AEC parts qualified for high-rel military and space applications. Responsibilities include the following:
Lead teams
Project management of parts, materials, and process (PM&P) tasks
Develop & maintain PM&P plans for EEE parts and electrical materials & processes (M&P)
Support the electrical design engineer in the part selection process and reviewing the parts list to ensure requirement compliance to the PM&P plan
Develop & maintain specifications including screening & qualification plans
Review & approve screening data & qualification conformance inspection (QCI) reports and destruct physical analysis (DPA) reports
Develop & maintain non-standard part approval requests (NSPAR)
Coordinate with component engineering subject matter experts (SMEs) in the development & qualification of complex EEE parts
Provide subcontractor oversight compliance in review and approval of PM&P plans, part lists, NSPARs, part specifications, qualification plans, & part derating reports
Perform GIDEP reviews, part obsolescence assessment & resolution, & part counterfeit mitigation assessments
Manage part failure resolution and coordinate with electrical failure analysis lab to determine root cause of failure & corrective action
Support design reviews & equipment buy-off (FCA/PCA)

REQUIRED EXPERIENCE:
Lab experience in failure analysis of EEE parts is a plus.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

TRAVEL: YES
Some travel required to support design reviews and visit suppliers within the continental US.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 172801
Job Location: Huntington Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 07/25/2018
Last Updated: 11/14/2018
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

MP&P Engineer 4

Description:
**Must be able to obtain a Secret Clearance**

This position requires a candidate with experience in parts management & component engineering of electrical, electronic, & electro-mechanical (EEE) parts used in space, man-space, launch vehicle, missile, Navy shipboard navigation and sensors, and military & commercial aircraft applications.

This position also requires some knowledge in the failure mechanisms of EEE parts, the use of plastic encapsulated microcircuits/devices (PEMs & PEDs) and automotive grade AEC parts qualified for high-rel military and space applications. Lab experience in failure analysis of EEE parts is a plus.
Responsibilities include the following:
• Lead teams
• Project management of parts, materials, and process (PM&P) tasks
• Develop & maintain PM&P plans for EEE parts and electrical materials & processes (M&P)
• Support the electrical design engineer in the part selection process and reviewing the parts list to ensure requirement compliance to the PM&P plan
• Develop & maintain specifications including screening & qualification plans
• Review & approve screening data & qualification conformance inspection (QCI) reports and destruct physical analysis (DPA) reports
• Develop & maintain non-standard part approval requests (NSPAR)
• Coordinate with component engineering subject matter experts (SMEs) in the development & qualification of complex EEE parts
• Provide subcontractor oversight compliance in review and approval of PM&P plans, part lists, NSPARs, part specifications, qualification plans, & part derating reports
• Perform GIDEP reviews, part obsolescence assessment & resolution, & part counterfeit mitigation assessments
• Manage part failure resolution and coordinate with electrical failure analysis lab to determine root cause of failure & corrective action
• Support design reviews & equipment buy-off (FCA/PCA)

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 373456
Job Location: Huntington Beach, CA
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 07/26/2018
Last Updated: 11/14/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The Materials Review Board (MRB) Engineer will consider many aspects that would apply to the discrepant component, for example: functional interface, structural integrity, metallurgical and mechanical properties, aerodynamics, future operator and maintenance requirements, weight impact, cosmetic appearance, etc. Evaluate nonconforming material for acceptability and reparability to ensure flight-worthiness of the components. The MRB Engineer will provide written disposition of the hardware. In instances where the nonconformance is unacceptable and the component cannot be used as-is, the MRB Engineer will provide written rework or repair instructions necessary to rectify the noncompliant condition and return the component for a serviceable condition. All rework or repair instructions will be detailed and must include the necessary inspection methods and acceptance criteria. The engineer will coordinate and seek consultation with various subject matter experts. Primary Responsibilities: • Evaluate nonconforming metallic structures components for acceptability and reparability to ensure flight worthiness of the components. • Evaluate nonconformance for impact on component performance, functionality, service life, maintainability and various other possibilities. • When acceptance of the nonconformance is not possible, develop a potential repair scheme and evaluate the repaired component for potential impact on component performance, functionality, service life, maintainability and various other possibilities. • Development of a repair should minimize risk to the component and minimally invasive and within the capability of the production area accomplishing the repair. • Repair dispositions must ensure component integrity and customer requirements are satisfied when the repair is accomplished as intended. • Consult with various subject matter experts including potential customer interaction addressing the nonconformance and proposed disposition. • Work with Production personnel such as Manufacturing Engineering to ensure repair disposition is understood, is feasible and can be accomplished as intended. • Assist Production areas in the determination of root cause and potential corrective actions to prevent nonconformance. • Work with team members to analyze nonconformance trend data, ensure the problem is understood, assist in developing and implementing corrective actions.MRB Engineering experience required. Potential 'split' shift responsibilities. Experience/Qualifications Required: • Prior experience with aircraft design, manufacturing, assembly or repair as an MRB engineer Preferred: • Logical problem solver who is organized and detail oriented • Ability to evaluate and make technical decisions with little outside input • Good written and verbal communication skills and the ability to work well in a team environment • Demonstrated ability to interpret engineering drawings and models (2D and 3D) and knows GD&T • Good understanding of computing tools and programs including the use of Microsoft Office • Familiar with PLM and ERP systems such as Teamcenter and SAP Familiar with many types of aircraft structure materials and fabrication processes. Bachelors Degree Required. All qualified candidates must be eligible to work in United States.
 
Job Number: 200
Job Location: Foley, AL
Rate: $60.00
Per Diem: No
Overtime: Yes
Duration: 12 months
Start Date: ASAP
Input Date: 08/09/2018
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

MRB Engineer

Description:
Materials Review Board (MRB) Engineer
Location: Foley, AL
12+ month contract





The Materials Review Board (MRB) Engineer will consider many aspects that would apply to the discrepant component, for example: functional interface, structural integrity, metallurgical and mechanical properties, aerodynamics, future operator and maintenance requirements, weight impact, cosmetic appearance, etc. Evaluate nonconforming material for acceptability and reparability to ensure flight-worthiness of the components. The MRB Engineer will provide written disposition of the hardware. In instances where the nonconformance is unacceptable and the component cannot be used as-is, the MRB Engineer will provide written rework or repair instructions necessary to rectify the noncompliant condition and return the component for a serviceable condition. All rework or repair instructions will be detailed and must include the necessary inspection methods and acceptance criteria. The engineer will coordinate and seek consultation with various subject matter experts.


Primary Responsibilities:
• Evaluate nonconforming metallic structures components for acceptability and reparability to ensure flight worthiness of the components.
• Evaluate nonconformance for impact on component performance, functionality, service life, maintainability and various other possibilities.
• When acceptance of the nonconformance is not possible, develop a potential repair scheme and evaluate the repaired component for potential impact on component performance, functionality, service life, maintainability and various other possibilities.
• Development of a repair should minimize risk to the component and minimally invasive and within the capability of the production area accomplishing the repair.
• Repair dispositions must ensure component integrity and customer requirements are satisfied when the repair is accomplished as intended.
• Consult with various subject matter experts including potential customer interaction addressing the nonconformance and proposed disposition.
• Work with Production personnel such as Manufacturing Engineering to ensure repair disposition is understood, is feasible and can be accomplished as intended.
• Assist Production areas in the determination of root cause and potential corrective actions to prevent nonconformance.
• Work with team members to analyze nonconformance trend data, ensure the problem is understood, assist in developing and implementing corrective actions.


MRB Engineering experience required. Potential 'split' shift responsibilities. Bachelor's Degree required.

Experience/Qualifications Required:
• Prior experience with aircraft design, manufacturing, assembly or repair as an MRB engineer Preferred:
• Logical problem solver who is organized and detail oriented • Ability to evaluate and make technical decisions with little outside input
• Good written and verbal communication skills and the ability to work well in a team environment
• Demonstrated ability to interpret engineering drawings and models (2D and 3D) and knows GD&T
• Good understanding of computing tools and programs including the use of Microsoft Office
• Familiar with PLM and ERP systems such as Teamcenter and SAP Familiar with many types of aircraft structure materials and fabrication processes



Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54673
Job Location: Foley, AL
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 08/09/2018
Last Updated: 11/12/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: lleszek@butler.com
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Bachelors degree in aerospace or mechanical engineering. - Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer. - Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures. - Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies. - Familiarity with results of composite NDI/NDT methods required. - Experience should be in a Production and/or schedule-driven environment. - Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment. - Strong written/verbal communication and interpersonal skills. - Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel) -
 
Job Number: 138961
Job Location: Tulsa, OK
Rate: 64-68 hourly
Per Diem: yes
Overtime: yes
Duration: L-T
Start Date: ASAP
Input Date: 07/31/2018
Last Updated: 07/31/2018
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, en