Job Search Results

700 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2017/11/23 Thursday 04:04PM Pacific Time by ContractJobHunter. )

Listings 1 - 700

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2102 - INDUSTRIAL/MANUFACTURING ENGINEER

Description:
Conduct analysis capacity and give recommendations.

Participate in the strategic plan of the company 0-10 years.

Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times.

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (work centers, crew type, shift,).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize work center considering human and material flow.

Manage production changes (sequence).

Identify and participate in Improvement projects.

College degree in Industrial Engineering.

Have a minimum of 5 years%u2019 experience in aerospace or manufacturing industry.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a team worker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Must have minimum 5 years' experience as an Industrial Technologist or Engineer balancing production lines.

French - English working knowledge an asset.
 
Job Number: 2102
Job Location: Montreal, Canada
Rate: 52.40 US
Per Diem: Paid – 3 Mths Only - @ $225 per. wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 03/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
4 Sr. Aircraft Interiors Design Engineers

Description:
4 Aircraft Interiors Designers Needed. Catia v5
MUST BE US PERSONS.

We are looking for senior level interior design engineers with experience doing conceptual design and preliminary design phase, initial sizing for developing head liners, trade studies, strong with Catia V5, have some background in mechanisms and moving parts, involved in engineering requirements definition and can mentor younger engineers.
BSME/BSAE is preferable, but not required.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $55-65/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 01/10/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
1 year contract position


**Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Duties:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbo machinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 6839
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL 4 openings!

Description:
Job Title: Aero Thermal Fluids Analyst
Job Number: 157623/5922867
Location: Jupiter, FL
Compensation: 61.79/hr max
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **

** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Keywords:
Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering # of Positions: 3
 
Job Number: MB-5922867
Job Location: Jupiter, FL
Rate: 61.79/hr max
Duration: 12 month contract
Input Date: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Air Systems ECS

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with Avionics systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Experience in as many of the following as possible:
o Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
5+ years relevant work experience related to avionics systems integration and certification.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Avionics Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.
The individuals in this role will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
The ideal candidate will possess aircraft certification experience with a specialty in electrical systems and 5 years of relevant work experience related to avionics systems integration and certification.

Responsibilities of the Aerospace Avionics Engineers

● Coordinate system test and certification requirements.
● Support flight test and ground test activities.
● Analyze test data and evaluate system operation.
● Prepare test reports.
● Domestic and occasional international travel is required.

Requirements of the Aerospace Avionics Engineers

● Experience in Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
● 5+ years relevant work experience related to avionics systems integration and certification.
● Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
● Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: LT
Start Date: open
Input Date: 03/15/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:
� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors
Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Cab/Fl
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: open
Input Date: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Essential Functions:
Coordation experience with a specialty in electrical systems.inate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elect/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with electrical systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: LA
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are seeking Electrical engineers with systems experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.

Essential Functions:
� Aerospace Electrical Engineer shall coordinate system test and certification requirements.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.

Desired Qualifications:
� Electrical Engineer will have a deep understanding of power distribution system, failure cases, load shedding, electrical power management
� Understanding of EWIS and wiring a plus
� 5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elec/Orl
Job Location: Orlando, FL
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Project Engineer

Description:
Aerospace Project Engineer

Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

Seeking a Project Engineers with Flight Test experience to join the team in Seattle, WA. The ideal candidate will possess 4+ years of experience in one of the following disciplines.
Flight Test Management Software
Flight Test Trouble Shooting Processes
Flight Test Equipment Management / Coordination
Aerospace Project Engineering
Bachelor�s Degree in Software Engineering, Aerospace Engineering, Mechanical Engineering, Project Management or a related subject (or equivalent combination of work and experience).
Four or more years of aerospace and/or project management experience. Flight Test environment preferred, but not required.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: Split possible
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Senior Test Equipment Project Engineer – Contract

Description:
Aerospace Senior Test Equipment Project Engineer – Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Senior Test Equipment Project Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA. Client is open Contract, long term contract or contract to hire.

Must be a US Citizen or Person. No visa or student visa candidates considered.

Principal Responsibilities:

• The functional expertise required for this Sr. Test Equipment Project Engineering position is primarily in the field of Mechanical Engineering with significant experience required in the areas of project management.
• The Senior Test Equipment Project Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.
• Must frequently solicit the aid and support of others to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• Prior experience understanding the design, analysis, and development of complex electrohydraulic, electromechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering required, an advanced degree preferred

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61990
Job Location: Rockford, IL Illinois
Rate: Market rate
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Systems Engineer

Description:
Aerospace Test Systems Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Systems Engineer supporting requirements and analysis. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA.
Customer is open to Contract- long term contract or contract to hire.

Aerospace Test Systems Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Systems Engineer supporting requirements and analysis. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA.

Principal Responsibilities:

• The functional expertise required for this Test Requirements and Analysis Engineering Position is primarily in the field of Systems Engineering with significant experience required in the areas of Requirements Definition, Integration, V&V, modeling & simulation & with project management.
• Build a project plan for the successful testing of new products from start to finish.
• Conceptualize and design of automatically controlled mechanical/hydraulic test rigs.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.
• Must frequently solicit aid and support to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• 5+ years’ experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering or related field required

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/


Principal Responsibilities:

• The functional expertise required for this System Engineer Test Requirements and Analysis Engineering Position is primarily in the field of Systems Engineering with significant experience required in the areas of Requirements Definition, Integration, V&V, modeling & simulation & with project management.
• Build a project plan for the successful testing of new products from start to finish.
• Conceptualize and design of automatically controlled mechanical/hydraulic system test rigs.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.
• Must frequently solicit aid and support to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• 5+ years’ experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering or related field required

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61987
Job Location: Rockford, IL Illinois
Rate: Comensurate
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Equipment Engineer - Contract

Description:
Aerospace Test Equipment Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Equipment Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydro mechanical aerospace components and systems for government and commercial applications.

Must be a US Citizen or US Person to be considered. No visa or student visa candidates condescended

This is a contract to hire position located in Torrance, CA. Customer is open to Contract- Long term contract or contract to hire.

Principal Responsibilities:

-Primarily in the field of Electrical Engineering with significant experience required in the areas of position control and power electronics and project management.

Project management, Test Equipment design, fabrication and verification are key experiences needed.

-Primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment.
-The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.- Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
-The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.
-Responsible for communicating with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design.
-Must frequently solicit the aid and support of others to achieve difficult schedule objectives.
-The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

-Prior experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro- pneumatic servo-mechanisms used in testing products.
-In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor- degree in Mechanical Engineering or related field

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61747
Job Location: Rockford, IL Illinois
Rate: Market
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Air Systems Engineer-Lead

Description:
Primary Responsibilities:
Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers.
Will be required to thoroughly check drawings for design intent and check Bill of Materials.
Must ensure drawings and deliverables meet the scope and client expectations.
Support procurement activities, including coordination with vendors and vendor drawings review.
Support contractor reviews, and installation planning activities.
Individual will travel globally for machine installation, check out and start up
Candidate will plan the work, and track and report work in progress.
Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate.
 
BS or MS in Mechanical or Chemical Engineering required.
10 to 12 years’ of related experience in the consumer products industry or any related industry is required. Experience with an engineering consulting firm is a plus.
Candidate should possess good experience on air systems, which include high vacuum systems, low vacuum systems, forced air systems, dust collection equipment like bag filters, RACF (reverse air flow cleaning filters), cartridge filters, trim collectors etc., vacuum material handling and vacuum conveying system concepts.
Knowledge of spark suppression and explosion suppression systems is preferred.
Experience on installation and duct traverse flow data collection would be added advantage.
Candidate must be able to calculate air balance, mass balance, line sizing, duct sizing, process vacuum requirements based on functions, and system pressure drop calculations.
Knowledge of international standards such as AMCA, ASHRAE , SMANCA ACGIL are required.
Should be able to select and size the fans, duct, and other air system elements like cyclones, filters etc.
Candidate must possess good communication skills and be able to successfully interact with clients on global projects.
Microsoft Office experience is required.
AutoCAD and SolidWorks experience is preferred.
Domestic and international travel will be required.
 
 
Job Number: 1610057845
Job Location: Green Bay, WI
Duration: 4 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhdvAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
Aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s is seeking multiple Aircraft Systems Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking a contract or fulltime engineers to join the team. At least five years� experience with one or more of the following: Electrical, Avionics, Flight Controls, ECS, Protective Systems (Anti Ice, Fire Protection), and Hydro Mechanical Systems (Landing Gear, Hydraulics). The ideal candidate will possess relevant aircraft systems integration and certification experience.
� Electrical
� Avionics
� Flight Controls
� Air Systems (ECS)
� Protective Systems (Anti Ice, Firex)
� Landing Gear
� Hydraulics

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analysis

Description:
REQUIRED SKILLS
Education: BSME/Aerospace Eng. required, MS preferred

WORK EXPERIENCE
10+ years experience in airframe structural analysis of metallic primary structures. Additional airframe advanced composite primary structure experience preferred. Experience with finite element modeling and analysis and familiarity with airframe structural testing and instrumentation practices. In-depth application of fatigue concepts and methodology. Familiarity with fracture mechanics principles/ methodology.

SOFTWARE EXPERIENCE
NASTRAN/PATRAN or equivalent FEM, Mathcad or equivalent math tools, Stress and strain based fatigue methods, MS Office applications and familiarity with Catia.

DUTIES AND ESSENTIAL FUNCTIONS
The Airframe Structural Analysis Core Competency Unit is responsible for insuring the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments. Structural integrity responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support. In fulfilling its function, adherence to the appropriate design criteria and other directives mandated by the customer and or regulatory agencies is strictly maintained. Specific functions include: Static structural analysis and Margin of Safety determination, finite element modeling of airframe structures using PATRAN/NASTRAN and stress-life fatigue analysis using Sikorsky standard work procedures.

US Citizenship (No dual citizenships.) required.
Over Time not guaranteed.
 
Job Number: 16-637-1394
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone Lead Coordinator

Description:
Airframe Systems Integration Zone Lead Coordinator/TSII
Savannah, GA
Rate: $65-$70

Unique Skills:

The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions: 1. Manages Installation Design of primary aircraft barrel assemblies. 2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules. 3. Manages the coordination and development of parts, planning, tooling & purchase orders. 4. Has oversight over the release of engineering documentation. 5. Responsible for interface definition & configuration control of a specific aircraft barrel section. 6. Reviews engineering and manufacturing release criteria. 7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements. 2. Experience in communicating with employees/teams in productive and efficient manner. 3. Ability to work independently and cross-functionally. 4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams. 5. Ensures designs meet customer criteria, quality standards and FAA requirements 6. Knowledge of industry design and documentation standards. 7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must. 8. Experience with mechanical assemblies and manufacturing technique design. 9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. 10. Performs other duties as assigned 11. CATIA Knowledgeware and SmarTeam experience desirable.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6813
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/06/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Airworthiness Inspector Sr.


Location: Savannah, GA
Rate: $35.75/HR
Long Term contract


Unique Skills:
Must be able to support AAP on all shifts 24 /7


Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6894
Job Location: Savannah, GA
Rate: $35.75/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/16/2017
Firm Name: INCONEN CORPORATION
Attention: Cherise Harris
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assembler

Description:
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
  • Assembles fabricated parts at floor stations.
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications.
  • Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers.
  • Identifies units that fail tests or tolerance levels and repairs as necessary.

This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Client's business needs.



 
As our ideal candidate, you will meet the following requirements:
  • High school diploma or its equivalent.
  • ***candidates must have computer skills and be familiar of how to use a computer***
  • May require 1 year of experience
  • Experience working with microscope; working with microscopic components
  • Must be comfortable with microscope work
  • Soldering skills/experience required
  • Must be able to us tweezers, vacuum wands and torque drivers.
  • Must be able to follow direction, documentation and listening to instruction.
  • Understanding and awareness of chemicals in the work area
  • Must be comfortable working in a hood and a Clean Room gown all day

Special Considerations:

  • Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions.
  • Exposure to machinery, chemical, biological, and physical risks is minimal.

Work Schedule:
1st shift
Mon-Fri 6:30am - 3pm
2nd shift
3pm-11:30pm


 
 
Job Number: 1610061196
Job Location: Redmond, WA
Per Diem: No
Duration: 6 months
Input Date: 11/23/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: 12720 GATEWAY DR S STE 102
City, State: TUKWILA, WA 98168-3333
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G12TAAS&URLSource=cjhunter

Assembler - Level 3

Description:
PDS Tech is seeking an Assembler for an open position in Acton, MA

In your role, you will:

    • Ability to accept various assignments in a non-structured, erratic production environment. 

    • Will be reporting to the Production Manager. 

    • Assembles fabricated parts at floor stations. 

    • Tests and calibrates parts and mechanisms to meet tolerances and product specifications. 

    • Uses hand tools and power tools to assemble units according to product specifications. 

    • Identifies units that fail tests or tolerance levels and repairs as necessary. 
    • HS Diploma or GED required 

    • Steel toed shoes required 



    Basic Qualifications: 

    • 1 year of experience in electro-mechanical assembly. 



    Additional Qualifications: 

    • Ability to function as part of a team and contribute to its overall success. 

    • High energy effort to complete tasks, flexibility and capability of working in a constantly changing department. 

    • Basic understanding of analog and digital PCB’s. 

    • Familiar with personal computers and their basic operation. 
     
    Job Number: 1610061012
    Job Location: Acton, MA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FypSAAS&URLSource=cjhunter

    Electronic Assemblers Needed in Redmond, WA

    Description:
    PDS Tech has an immediate need to fill several Electronic Assembler positions in Redmond, WA.  If you are skilled at electronic assembly, please apply today. 
     
    Some of your responsibilities as an Assembler will include:
    • Assemble fabricated parts at floor stations. 
    • Test and calibrate parts and mechanisms to meet tolerances and product specifications. 
    • Use hand tools and power tools to assemble units according to product specifications.
    • Identify units that fail tests or tolerance levels and repair as necessary.
    • Specific tools used will be tweezers, vacuum wands and torque drivers.


    These positions are contract to hire, based on individual work performance, attendance/dependability, and business needs.

    All shifts are available.

      


     
    Requirements:
    • Experience working with microscope and microscopic components.
    • Soldering skills and experience.
    • Basic computer skills.
    • High school diploma or its equivalent.
    • US citizen or permanent resident.
    • English language comprehension and communication abilities.

     
    Job Number: 1510015749
    Job Location: Redmond, WA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000007iU8AAI&URLSource=cjhunter

    Assembler- MA

    Description:
    Chipton Ross is seeking an Assembler in Marion, MA

    Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

    Mandatory:
    Ability to read/comprehend MEIs, PWIs and manufacturing prints supplied and assemble various products meeting IPC 610 standards and customer requirements.

    Desired:
    Soldering experience, Ability to read/comprehend documentation written in English Good communication skills. Ability to learn and follow written instructions.
     
    Job Number: 160418
    Job Location: Marion, MA
    Rate: $15 to $17.00 DOE
    Duration: 1 year
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Johnnie Barrientos
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jbarrientos@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Avionics Engineer

    Description:
    A Leading Aerospace company, located in Canoga Park, CA, is seeking a Principal Engineer, Avionics for a 12+ month contract role.

    •Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.
    •Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
    •Experience is design of cables and harnesses for applications for Aerospace products.
    •Proficiency in use of Creo PDM/Link and Windchill.
    •Additional proficiency with GD&T and tolerance analysis.

    Skills:
    •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
    ◦Previous experience with MODELCHECK preferred

    •Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
    ◦Large Assembly Management, Simplified Representations, Combination States
    ◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
    ◦Mechanism Design
    ◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

    •Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
    ◦Harness flattening using Creo Harness-MFG extension

    •Working knowledge of Creo Schematics 2.0 desired including:
    ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
    ◦Diagram creation utilizing a Central Catalog


    Education:
    BSME with 10 years of experience or 15 + years of equivalent experience
     
    Job Number: 11629
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 1 Year+
    Start Date: February
    Input Date: 03/03/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    CMM Technician

    Description:
    Responsibilities:

    • Candidate will be responsible to work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and DCC CMM's.
    • Candidate will also be responsible to perform precision inspection verifications on mechanical parts, components, assemblies and materials. May include but is not limited to first article parts, in-process and final inspection on assemblies, and materials for workmanship and conformance to specifications / drawings.
    • Candidate will utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and CMM’s.
    • Approves or rejects items and documents inspection results as required. Communicates with internal customers as required to resolve inspection, engineering and manufacturing challenges.

    Basic Qualifications:

    • High School Diploma or GED.
    • Minimum 5 years of in-process and final inspection experience.
    • Must have PC-DMIS experience using direct CAD models.
    • Minimum 3 years recent CMM inspection.
    Preferred Skills and Experience:
    • ISO 9001 / AS9100 experience a plus.
    • Romer Arm experience is preferred but it is not required with sufficient PC-DMIS skills.
    • Understanding of process control experience is a plus.
    • AA Degree is preferred.
    • Must be open to working any of the following shifts:1st Shift (A) – Su, M, T, W, Th – 5:00am – 3:30pm; 1st Shift (B) – T, W, Th, F, Sa – 5:00a - 3:30pm; 1st Shift (W) – F, Sa, Su, M – 3:00am – 3:30pm; 2nd Shift (A) – Su, M, T, W, Th – 3:30pm – 2:00am; 2nd Shift (B) – T, W, Th, F, Sa 3:30pm – 2:00am; 2nd Shift (W) – F, Sa, Su, M – 3:00pm – 3:30am with overtime as necessary.

    Additional Requirements:
    • Requires the ability to read and interpret engineering drawings and specification using ASME Y14.5.
    • Experience with GD&T and skillful use of metrology tools and gages required.
    • Experience with Microsoft applications including Word and Excel.
    • Be able to lift a minimum of 25lbs on occasions.
    • Stand, walk, push, pulls, reach overhead, and bend to the floor.
    ITAR Requirements:
    To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
     
    Job Location: Hawthrone, CA
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    CNC Lathe Machinist

    Description:
    PDS TECH is looking for a CNC Lathe Machinist for our client in TOrrance, CA

    Must be able to set up and operate manual and CNC lathes. Capable of holding tight tolerances associated with the machining of precision parts. Must be able to read blueprints and interpret written work instructions. Prior experience using multi-axis CNC Lathes required ie.) Okumas

    Employee will work in a machine cell where he/she will be responsible for the operation of 1 or more machines at a time, depending on production needs. Employee must be comfortable multi-tasking in a fast paced environment.
     
    Candidate must possess 2 years of Lathe Machinist experience (NOT SIMPLY MACHINE OPERATION).
    Must be comfortable setting-up and troubleshooting mechanical issues with CNC Lathes.
    Must also be comfortable using various measuring equipment such as Micrometers, Calipers, and Dial Bore Gauges.

    High School diploma or GED required. 
    Machining trade a plus.

     
    Job Number: 1610061638
    Job Location: Torrance, CA
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Karla Pelonis
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G3kyAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cabin Interiors Design Engineer

    Description:
    Unique Skills:
    Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Mount Configuration Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.
     
    Job Number: 24-134
    Job Location: Savannah, GA
    Rate: $55-$63/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 02/07/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Joe
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Cabin Safety Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

    Seeking direct and contract Cabin Safety engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:

    � Flammability
    � Emergency lighting
    � Escape slides
    � Seats crash testing
    � Exit row indications and placards
    � Emergency exit doors

    Essential functions:
    � System requirements verification and validation.
    � Flight test and ground test specifications.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Prepare test reports.

    Desired Qualifications:
    � Cabin Safety Engineer shall have experience with flammability, emergency lighting, slides, crash testing, etc.
    � Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: CS/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    Certification Expert - Fire Protection

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking a Certification Expert for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    The Engineer will work and lead activities of Fire Protection System (FPS) Team reporting to the CM in this role.
    Within the airworthiness tasks, the demonstration of compliance process includes the Independent Checking of the Demonstration of Compliance of documents produced by the Design Organization, which need airworthiness release. The independent checking is performed by the Compliance Verification Engineer (CVE).
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053086
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tTiiAAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineer

    Description:
    Completions Mechanical Engineer Tech Spec II

    Location: Savannah, GA
    Rate: $62.00/hr - $67.00/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required.
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc).

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

    Principal Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6795
    Job Location: Savannah, GA
    Rate: 62.00-67.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/06/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineering Consultant

    Description:
    Unique Skills:

    -CATIA V5 and SmarTeam experience required -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
     
    Job Number: CompMech
    Job Location: Savannah, GA
    Rate: 58-63
    Per Diem: Yes
    Overtime: yes
    Duration: 1 year minimum
    Start Date: asap
    Input Date: 01/04/2017
    Firm Name: SOURCE GROUP PROFESSIONALS INC
    Attention: Recruiter
    Address: 4729 E SUNRISE DR STE 244
    City, State: TUCSON, AZ 85718
    800 Phone: 888/352-8797
    Fax Phone: 866/835-2145
    Website: www.sourcegrouppros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical Engineering Consultant

    Description:
    Completions Mechanical Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
     
    Job Number: 6898
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Mechanical/Liaison Engineering Consultant

    Description:
    Completions Mechanical/Liaison Engineering Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    -CATIA V5 and SmarTeam experience required
    -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
    -Experience in Aircraft Production cabin installation liaison duties
    -Able to track engineering change and also provide sound technical advice to engineering design teams during aircraft cabin installations.
     
    Job Number: 6899
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/05/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Component Calibration Technicians

    Description:
    JSG is looking for a Component Calibration Lab Technician - First Shift and Second Shift for a 12+ month contract opportunity in Stratford, CT!

    Duties:
    Mechanical Component Calibration / Ground Test Instrumentation lab technician capable of working from Engineering drawings with limited guidance to fabricate, install, diagnose and repair hydraulic, mechanical and data systems associated with component calibration fixtures and facilities required to support ongoing Engineering Ground and Flight Test Development programs.
    The calibration of Flight aircraft and Ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
    Must be able to work at heights.
     
    Job Number: 353387
    Job Location: Stratford, Ct.
    Rate: open
    Per Diem: Yes-If qualified
    Overtime: Possible
    Duration: 12 month +
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Computing Security & Information Protection Specialist, Berkeley, MO 63134

    Description:
    PDS is seeking a Computing Security & Information Protection Specialist for an open position in Berkeley, MO 63134.  
    In your role you will:
    • Evaluates, communicates and mitigates computing and information security risks.
    • Ensures that appropriate processes are in place and followed so that systems are compliant with applicable requirements.
    • Participates in compliance audits and assessments. Analyzes security events and records to determine if security incidents have occurred.
    • Provides consultation on security issues.
    • Develops policies and provides oversight for protection of computing security systems. U
    • ses advanced investigative knowledge to assist in investigations. Participates in and/or leads incident response teams.
    • Participates in and/or leads the development of information security training materials and processes.
    • Provides compliance and audit support.
    • This job requires interfacing with the appropriate government customers, suppliers, and company personnel to implement protective mechanisms and to ensure understanding of and compliance with government and company computing security requirements.
    • The candidate will be responsible to ensure that customer needs are effectively promoted in policy and security standards.

    Education:
    Technical bachelor’s degree and typically 5 or more years’ related work experience or a Master’s degree with typically 3 or more years’ or a PhD degree or an equivalent combination of education and experience. A technical degree is defined as any four year degree, or greater, in a mathematic, scientific or information technology field of study.
    Experience:
    • With minimum supervision, the candidate must be able to perform security analysis of operational environments, threats, vulnerabilities and internal interfaces to define and assess compliance to accepted industry and government standards.
    • Configure various operating systems such as Windows, Linux, and Solaris to meet Joint Special Access Program Implementation Guide (JSIG), Joint Air Force Army& Navy 6/3 (JAFAN 6/3), ICD 503 and National Industrial Security Program Operating Manual (NISPOM) standards.
    • Develop certification and accreditation (C&A) documentation for new and existing systems; perform risk managed file extractions in accordance with customer guidance.
    • Review weekly audit logs and investigate any anomalies for UNIX, Linux and Windows systems.
    • Analyze new technologies, both hardware and software, to determine security vulnerabilities and mitigations.
    • The candidate will also be required to train general and privileged users in computing security processes, policies and procedures.
    • This job will require documenting and presenting for approval Information System Security Plans, Concept of Operations (CONOPS,) and other written documentation as required by JSIG, JAFAN 6/3, NISPOM, ICD 503 and other customer direction.

     
     
     




     
     


     
     
    Job Number: 1610047223
    Job Location: Saint Louis, MO
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisabeth Laspe
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000026Cp8AAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Contract - Manufacturing Engineer II

    Description:
    Unique Skills:

    SAP, Solumina, Electrical systems knowledge


    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.


    Position Purpose:

    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 88302
    Job Location: Pooler, GA
    Overtime: Possible
    Start Date: ASAP
    Input Date: 01/10/2017
    Firm Name: INTERGEN GROUP
    Attention: Cort Hayes
    Address: SUITE 200
    5051 PEACHTREE CORNERS CIR

    City, State: PEACHTREE CORNERS, GA 30092
    Phone: 678/318-1816
    Fax Phone: 678/493-1467
    Website: www.intergengroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Control Systems Engineer Programmer

    Description:
    Position Description:

    Reviews, analyzes, and modifies programming systems including encoding, testing, debugging and installing to support an organization's client/server software applications.
    Accountable for field engineering support to the Resort and supporting departments, including control systems engineering services for ride, show, and other ride related control systems. These services include: planning, organizing, and leading teams in troubleshooting; problem resolution; system operational enhancement; system reliability improvement; and documentation.
    Must have sufficient technical knowledge and awareness of details to be able to recognize when technical problems are developing in various disciplines, and to initiate appropriate corrective actions. Respond to mechanical and control emergencies resulting from Attraction downtimes at the Resort.

    Requirements:
    • Controls Systems experience with 1-5+ years in the amusement park industry or industrial/manufacturing environment
    • Ride element performance analysis: dynamic, kinematic, hydraulic and pneumatic analysis and calculations
    • Knowledge gained by experience in the following:
    Electronic control systems and signal processing, including familiarity with relays and programmable logic controllers
    Electrical motor controls including variable frequency drives and soft starts
    Variety of industrial automation PLC manufacturers
    National and California Electrical Code
    Nationally recognized Testing Laboratory certifications such as TUV, UL, etc.
    AutoCAD o Object oriented programming
    C and C++ programming
    Ladder logic
    Wiring and interconnect diagrams
    ANSI, ASTM, and IEEE standards
    • Excellent oral and written communication

    Bachelor of Science in Electrical Engineering, Mechatronics, Electronics Engineering, or equivalent from an ABET accredited University.
     
    Job Number: JO358752
    Job Location: Anaheim, CA
    Duration: 12 months+
    Start Date: asap
    Input Date: 01/12/2017
    Firm Name: CDI CORPORATION
    Attention: Jonathan Oleson
    Address: 17177 PRESTON RD STE 300
    City, State: DALLAS, TX 75248
    Website: www.cdicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Creo Design Engineer

    Description:
    An International company, located in Canoga Park, CA, is seeking a Design Engineer II for a 4+ month contract role.

    ** Candidates should have experience with Creo and GD&T **
    ** Windchill experience strongly preferred **

    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware
    Applies theories of heat and energy transfer to create practical solutions to technical problems
    Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.


    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.
    Skills:

    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.


    Engineers also required to analyze and verify product design and performance for adequacy and reliability.

    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.


    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.

    Must be able to prepare and make presentations at both internal and customer design reviews.
    Education:

    BS degree in Engineering or equivalent. MS degree is desired.
    5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems.
     
    Job Number: 11728
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 6 Months+
    Start Date: January
    Input Date: 01/31/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    DFC Structures Flight Test Engineer

    Description:
    PDS is seeking a EFCS  Engineer for an open position in West Palm Beach, FL


     


    In your role, you will:


    • Test planning function, conduct and report helicopter flight tests in structures and dynamics
      1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
      2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
      3. Large volumes of gathered flight data are processed and analyzed.
      4. Certification and/or qualification tests are summarized in reports.
       

    Education and Experience:
    - Bachelor's in Aerospace or Mechanical Engineering as a minimum
    - Candidate must have flight test or aerospace design experience
    - Rotary wing experience preferred.
     

     
    Job Number: 1610052203
    Job Location: West Palm Beach, FL
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001sjdzAAA&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity

    Description:
    Looking for an applicant with a Bachelor's degree and at least 5 years in the following: Check 3D engineering data for conformance to Gulfstream requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding GAC drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems. • Ensures designs meet customer criteria, quality standards and FAA requirements. • Adheres to budget and project schedules. • Provides design guidance and feedback to other engineering personnel. • Other duties as assigned. • Knowledge of industry design and documentation standards. • Experience with mechanical assemblies and manufacturing technique design. • Ability to work independently and cross-functionally. • Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
    PLease check out all of our openings at
    www.hi-tecsolutions.com/jobs
     
    Job Number: 89201
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 01/25/2017
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: 2501 E PIEDMONT RD STE 103
    City, State: MARIETTA, GA 30062-7753
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Data Integrity Engineer (TSI)

    Description:
    Data Integrity Engineer (TSI)

    Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Long Term contract


    Unique Skills:
    - Check 3D engineering data for conformance to company requirements as directed.
    - Check parts for fit, form and function to the extent that information is available.
    - Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.
    - Checkers are responsible for determining the acceptability of data in the following areas:
    • Accuracy and completeness of engineering product definition data, including CAD and PDM data.
    • Proper application and compliance with all Engineering and customer drawing requirements.
    • Use and understanding of GD & T a must.
    • Dimensioning and tolerancing including familiarity with ASME Y14.5.
    • Application of best drafting and design practices and procedures.
    • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    • Advise Design personnel regarding company drawing and design practices and procedures.
    • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
    • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
    • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
    • Knowledge of company parts list & PdocM, a plus.

    Essential Duties and Responsibilities
    • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
    • Ensures designs meet customer criteria, quality standards and FAA requirements.
    • Adheres to budget and project schedules.
    • Provides design guidance and feedback to other engineering personnel.
    • Other duties as assigned.
    • Knowledge of industry design and documentation standards.
    • Experience with mechanical assemblies and manufacturing technique design.
    • Ability to work independently and cross-functionally.
    • Experience in communicating with employees/teams in productive and efficient manner.
    • Strong communication and problem-solving skills.


    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6945
    Job Location: Savannah, GA
    Rate: $50.00 - $55.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/28/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer / NX 10 CA

    Description:
    Job Title: Design Engineer
    Job Number: 157682/4391
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract

    Description:

    • Contribute to the development of new product requirements through consulting with customers and sales personnel.
    • Validate conceptual problem solutions by performing trade studies and analyses.
    • Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
    • Operate as a key element in a team of creative, independent individuals.
    • Represent Moog in a manner consistent with its technical reputation.
    • Create reliable designs through a comprehensive experimental development test program.
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 5-8 years of design and development engineering experience
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Excellent customer relations skills
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Team orientation and desire to participate in and contribute to a high functioning team
    Scope: Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.
     
    Job Number: MB-4391
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 03/10/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer 3

    Description:
    This position requires a strong background in Aerospace Engineering/Design with an emphasis on pneumatic, mechanical and electro-mechanical components/assemblies. The ideal candidate will have experience in the design, analysis and prototyping of pneumatic fluid control devices such as solenoid and motor operated pneumatic valves. The candidate should have a broad background including work with mechanical devices and subsystems, preferably for use in military or commercial aviation. Knowledge of airborne weapon systems and /or weapon carriage equipment is strongly desirable.

    Specialist knowledge regarding the sizing of flow elements, design and operation of high pressure pneumatics, hydraulics, motor actuators and solenoids will be a strong differentiator for candidate selection. Must be flexible and able to work effectively in a fast paced environment as a member of a cross functional team and as an individual contributor.


    SKILLS / REQUIREMENTS
    Minimum BSME, BSAE and 7 to 10 years experience in relevant design/development environment, preferably for military or commercial aviation.

    Knowledge of manufacture of mechanical components and assemblies with emphasis in complex electromechanical systems, or large structures

    Knowledge of manufacturing techniques, their capabilities, strengths and weaknesses. Prior assembly or shop experience is a plus

    Must have knowledge of aerospace materials properties and selection as well as processing including Heat Treat and Coatings for aerospace requirements

    Must be able to perform basic measurements and simple inspection processes

    Must be able to demonstrate knowledge and experience in creation of design concepts using hand sketches, and CAD tools.

    CAD experience in CATIA or Pro-E a plus

    Must be able to perform preliminary flow passage sizing, pressure vessel and structure stress checks and rough sizing calculations by hand. Use of FEA tools is a plus.

    Must have experience with MIL-STD documents, reading and interpretation of ASME Y14.5

    Must be able to write engineering reports that include analysis and results

    Must have excellent verbal and written communication skills

    Must be fluent in written and spoken English

    Evidence of accomplishment in self-documentation of work product through technical reports, test reports etc. will be considered as a plus

    Knowledge of Microsoft Office products is essential

    Proof of Education is required
    US Citizenship Required
     
    Job Location: Inglewood, CA
    Rate: Open
    Per Diem: No
    Overtime: No
    Duration: Permanent
    Start Date: Now
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer II

    Description:
    OCCUPATIONAL SUMMARY
    Design coordination of seats and seat components. Coordinates changes with other internal company departments, vendors, and customers.

    DUTIES AND RESPONSIBILITIES
    Reviews specification as related to assigned job.
    Prepares check list.
    Prepares lay-outs.
    Prepares structural sub-assemblies and drawings.
    Prepares sketches for details.
    Reviews drawing package to assure conformance to requirements.
    Submits completed drawings to project lead for approval and release.
    Liaison for assigned task.
    Perform other duties as required.

    QUALIFICATION REQUIREMENTS
    KNOWLEDGE AND SKILLS
    Must have excellent drafting skills in CATIA V5 (or higher) and/or Pro/Engineer.
    Must be able to provide complicated lay-outs and program design studies.
    Must be able to interact successfully with engineering, tooling, and manufacturing departments.
    Must be able to function as part of a design team.
    Must have a thorough understanding of manufacturing processes.

    EDUCATION AND/OR EXPERIENCE
    Must have a Bachelors degree in Mechanical Engineering, Aerospace Engineering Aeronautical Engineering, Mechanical Engineering Technology, Design Engineering, Automotive Engineering, Manufacturing Engineering, Manufacturing Engineering Technology, Mechanical and Energy Engineering or a related engineering degree (minimum of 12 years equivalent related engineering experience will be considered in lieu of Bachelors degree) plus an additional 2 years of related design experience required.
    OR
    Must have a Masters degree in Mechanical Engineering, Aerospace Engineering Aeronautical Engineering, Mechanical Engineering Technology, Design Engineering, Automotive Engineering, Manufacturing Engineering, Manufacturing Engineering Technology, Mechanical and Energy Engineering or a related engineering degree plus 1 year of related design experience required.

    COMMUNICATION SKILLS
    Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.

    REASONING ABILITY
    Ability to think strategically and solve problems.

    PHYSICAL DEMANDS
    This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

    Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
     
    Job Number: 16-610-7461
    Job Location: South-central
    Rate: $48K to $65K
    Per Diem: No
    Overtime: Possible
    Duration: DIRECT
    Start Date: ASAP
    Input Date: 03/20/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer II

    Description:
    Design Engineer II for an opening in Canoga Park, CA.

    RESPONSIBILITIES:
    Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors). Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
    Supports combustion devices hardware through the entire product life cycle. Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities. Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques. Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
    Assignments typically have specified objectives and require the investigation of a limited number of variables. May make presentations to small audiences.
    Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product. May assign work to and direct less senior engineers and support personnel as required.

    Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
    Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational. May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

    REQUIRED EXPERIENCE:
    Candidates should have hands on mechanical experience. This position will be setting up lab experiments and managing data.
    General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering. Knowledge of statistical methods. Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems. Ability to operate effectively in a team environment.

    EDUCATION:
    Bachelors degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.

    1st Shift, 5/40 Schedule
     
    Job Number: 161344
    Job Location: Canoga Park, CA
    Duration: 8 Months
    Start Date: ASAP
    Input Date: 01/03/2017
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer II

    Description:
    Design Engineer II
    Canoga Park, CA
    3 Month Contract
    $28-30.00/Hr

    Duties:
    ** Candidates should have experience with Creo and GD&T **



    ** Windchill experience strongly preferred **



    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware
    Applies theories of heat and energy transfer to create practical solutions to technical problems
    Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.



    Engineers also required to analyze and verify product design and performance for adequacy and reliability.



    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.



    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.



    Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    BS degree in Engineering or equivalent. MS degree is desired.



    5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems.
     
    Job Number: 6846
    Job Location: Canoga Park, CA
    Rate: 28.00-30.00
    Per Diem: Possible Split
    Overtime: Possible
    Duration: 3 Mos
    Start Date: ASAP
    Input Date: 01/17/2017
    Firm Name: INCONEN CORPORATION
    Attention: Brad
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineer II / Creo and GD&T Windchill CA URGENT

    Description:
    Job Title: Design Engineer II
    Job Number: 157943/5830011
    Location: Canoga Park, CA
    Compensation: 30/hr
    Assignment Length: contract


    Description:


    Duties:
    ** Candidates should have experience with Creo and GD&T **



    ** Windchill experience strongly preferred **



    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

    Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.



    Engineers also required to analyze and verify product design and performance for adequacy and reliability.



    Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.



    Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.



    Must be able to prepare and make presentations at both internal and customer design reviews.

    Education:
    BS degree in Engineering or equivalent. MS degree is desired.



    5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems.
     
    Job Number: MB-5830011
    Job Location: Canoga Park, CA
    Rate: 30/hr max
    Duration: 4 month contract
    Input Date: 01/19/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Design Engineers

    Description:
    CATIA V5, aircraft interiors, galleys, lavatories, secondary structures, mechanical

    -Holiday Pay
    -Medical
    -Dental
    -Vision
    -Short-Term Disability
    -Direct Deposit
    -401(k) Immediate Enrollment
    -Annual Bonus
    -Referrals
    -Personal Communications
     
    Input Date: 01/23/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545, 817/354-5555
    800 Phone: 866/758-2494
    Email: resumes@agentetech.com
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Engineers with Flight Controls Experience

    Description:
    Perform design of aircraft flight controls systems.
    MUST HAVE flight controls experience from a General Aviation OEM:
    Cirrus Aircraft
    Textron (Cessna/Hawker)
    Piper
    AND the following would work too:
    Gulfstream
    Bombardier/Lear
    Embraer

    MUST BE US PERSONS
    Create 3D/2D definition.
    CATIA V5 is a MUST.
    Participate in the Engineering definition review, approval and release process
    Support the review of manufacturing plans and procedures to ensure compliance with design requirements
    Support the creation of test plans which will be used to verify manufacturing processes meet design intent and requirements.

    Looking for self-starters who are problem solvers. Need guys who do not rely on internal processes and hand-holding. Must ask questions and work with peers to figure out problems.

    MUST BE US PERSONS

    The Structures Company LLC is an AA/EOE.
     
    Job Location: Mojave, CA
    Rate: up to $65/hr
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 10/17/2017
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Systems Integration Zone

    Description:
    Airframe Systems Integration Zone

    Location: Savannah, GA
    Duration: Long Term Contract
    Pay Rate: $60/hr - $65/hr
    Shift: First

    Position Purpose:
    The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

    Essential Functions:
    1. Manages Installation Design of primary aircraft barrel assemblies.
    2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
    3. Manages the coordination and development of parts, planning, tooling & purchase orders.
    4. Has oversight over the release of engineering documentation.
    5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
    6. Reviews engineering and manufacturing release criteria.
    7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

    Additional Functions:
    1. Actively works to improve daily processes and ensures all work meets customer requirements.
    2. Experience in communicating with employees/teams in productive and efficient manner.
    3. Ability to work independently and cross-functionally.
    4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
    5. Ensures designs meet customer criteria, quality standards and FAA requirements
    6. Knowledge of industry design and documentation standards.
    7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
    8. Experience with mechanical assemblies and manufacturing technique design.
    9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    10. Performs other duties as assigned
    11. CATIA Knowledgeware and SmarTeam experience desirable.

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 6814
    Job Location: Savannah, GA
    Rate: 60-65
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/15/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Design Validation Engineering IV

    Description:
    OCCUPATIONAL SUMMARY
    The individual is responsible for executing projects in proper direction to obtain a certified seat structure. He/she would stand as technical specialist for design validation.

    DUTIES AND RESPONSIBILITIES
    A. Recommend strategies for all design validation activities with respect to applicable requirements by utilizing analytical process and testing as necessary to the DV group.
    B. Will scrutinize all the analyses done by design validation engineers and propose new ideas to them.
    C. Implement analytical approach and help DV staff in establishing decent correlation with test data.
    D. Mentor the Design Validation Engineers and mold them per department requirements.
    E. Will be responsible for software license follow up and its proper implementation.
    F. Responsible for planning cost effective and robust design visions with Lead design validation engineer.
    G. Comply with Zodiac Seats procedures (QAP) and certification internal procedures.
    H. Responsible for analyzing weight saving structure and building tested material data base used for finite element models
    I. Will be responsible for building PSM (Prescribe structure models) models.
    J. Will actively work on inflatables and airbag projects.
    K. Responsible for developing new ideas to control HIC (head injury criteria).
    L. Provides status and schedule updates to department head and other appropriate entities on a regular basis.
    M. Responsible for answering design related questions pertaining to failure of composites and seat structure.
    N. Will be working simultaneously with test lab manager to obtain useful test data.
    O. Advising Leads/Manager/Directors for new processes

    QUALIFICATION REQUIREMENTS
    KNOWLEDGE AND SKILLS
    1. Must have strong background for finite element modeling tools and solvers.
    2. Must have strong understanding of dynamic test modes conducted at ZSUS per FAA requirements.
    3. Must have vast knowledge of airbags and occupant restraint systems along with seat structure.
    4. Familiarity of FMVSS/consumers requirement is preferred but not mandatory.
    5. Must have excellent knowledge of ATDs (Anthropomorhic test dummy) hardware and model.
    6. Minimum of 6-8 years FEA experience using LS-Dyna, Altair HyperWorks suite.
    Experience with solvers like Madymo, ABAQUS, PAMCRASH, NASTRAN is preferred.
    7. Must have strong unix/linux or window based system knowledge.
    8. Knowledge of composites is required.
    9. Must have strong mechanical aptitude.
    10. Must be detail oriented and have sound engineering judgment.
    11. Must be self-motivated and a self-starter.
    12. Good knowledge of Radioss, Primer, ESI-visual is preferred.
    13. Must be able to communicate efficiently in writing and verbally.
    14. Must be able to operate standard office equipment.
    15. Must be able to generate documents such as, plans, data sheets and reports.
    16. Must have ability to analyze CAD drawings.
    17. Must have dynamic and static testing experience.
    18. Basic Pro/E/CATIA skill is preferred.
    19. Familiarity with FAA regulations, Boeing/Airbus specifications is preferred.
    20. Must be able to communicate well with internal departments, customers, and regulatory agencies.
    21. Must be presentable and write technical presentations

    EDUCATION AND/OR EXPERIENCE
    Must have a M.S. in Mechanical or Aerospace Engineering with 6-8 yr. of FEA related experience.
    LS Dyna experience, minimum of 6 years required.
    Supervisory experience preferred but not required.


    COMMUNICATION SKILLS
    Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.

    REASONING ABILITY
    Ability to solve problems and think strategically

    PHYSICAL DEMANDS
    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
    While performing the duties of this job, the employee is required to sit for long periods of time while working with computers and viewing computer monitors, and other office equipment alternated with periods of standing and walking. This position also requires extensive walking/standing to participate in activities on the shop floor. Time period may vary from day to day. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

    Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Management reserves the right to waiver qualification requirements when experience levels are exceptional.
     
    Job Number: 16-609-7432
    Job Location: South-central
    Rate: $70K to $90K
    Per Diem: No
    Overtime: Possible
    Duration: DIRECT
    Start Date: ASAP
    Input Date: 03/20/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Designer 4 - MS

    Description:
    Chipton-Ross is seeking a Designer 4 for an opening in Pascagoula, MS

    RESPONSIBILITIES:
    Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or AutoCAD. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.

    Successful candidate will possess an extensive knowledge in specialized functions and a wide and comprehensive acquaintance with, and understanding of, both general and specific aspects of the job and their practical application to complex problems and situations ordinarily encountered.

    Successful candidate will be able to work with minimal supervision. Work may be done without established procedures. May assist in orienting, training, assigning and checking the work of lower level employees and will often be designated as lead worker.

    Typical duties and tasks are varied and complex. Serves as a resource to others in the resolution of problems and issues. Contacts are frequent with individuals representing outside organizations, and/or individuals of significant importance within the company. Contacts involve planning and preparation of the communications, require skill, tact, persuasion and/or negotiation to accomplish the objectives of the communication.

    Specific duties for Fleet Sustainment Engineering include but are not limited to the development and implementation of Ship Change Documents (SCDs), initiation, development, and review of technical drawings, processing of change paper, supporting technical analyses of mechanical systems, supporting preparation of special studies, and cognizance of specific marine systems and ship alterations.

    REQUIRED EXPERIENCE:
    High School diploma or equivalent and six (6) years of related design experience or associates degree and three (3) years of related design experience.

    EDUCATION:
    HS/ GED


     
    Job Number: 155940
    Job Location: Pascagoula, MS
    Rate: $40 to $46.00 DOE
    Duration: 1 year
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Terry Jones
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: tjones@chiptonross.com
    Website: www.chiptonross.com

    Designer/Drafter 3

    Description:
    PDS Tech, Inc. is seeking a Designer/Drafter for an open position in NSacaramento, CA.
    In your role you will:

    • Completes complex drawings to suit engineering changes and initiates engineering changes.
    • Completes the creation of complex design layout and detail drawings of complex products.
    • Performs compilation of materials and specification sheets.
    • Performs dimensions/specification determination necessary on complex drawings for effective manufacturing.
    • Performs the designs of cost-effective complex products with adherence to applicable industry and customer standards/specifications.
    • Completes complex investigations related to product design and maintenance.
    • Performs review of complex engineering drawings and supporting documents for adherence to drafting standards.
    • Completes planning test programs.
    • Selects material based on application; may coordinate procurement. 


     
    Skills and requirements: 
    • PTC CREO Elements/Pro 5.0 
    • Pro Sheetmetal, Piping, Cabling, Surfacing 
    • Autocad 2010 
    • Experience designing sheet metal parts, structural weldments, Electro-Mechanical packaging, large and small welded and/or bolted assemblies, fiberglass and plastic parts 
    • Experience with corrosion protection (ie. Paint, Powder Coat, anodizing, zinc plating) 
    • Experience creating bill of materials, Engineering change procedure, technical writing skills, and creating work instructions 
    • Experience working in a manufacturing environment, interfacing with factory workers, purchasing, communication with suppliers and customers, and interdepartmental interaction 


    Education and Work Experience

    • Bachelor's degree in related field with 2 years experience 
    • Associate Degree in related field with 3 years experience 
    • High School Diploma with 5 years experience 


     
     
    Job Number: 1610055971
    Job Location: Sacramento, CA
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lea Salmo
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FXkOAAW&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Development Engineer

    Description:
    A Leading Aerospace company, located in Canoga Park, CA, is seeking an Development Engineer II for an 8+ month contract role. The client is seeking candidates with hands on mechancial experience. This position will be setting up lab experiments and managing data.

    Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors).
    Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
    Supports combustion devices hardware through the entire product life cycle.
    Analyzes and verifies product design and performance for adequacy and reliability.
    Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
    Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.
    Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
    Assignments typically have specified objectives and require the investigation of a limited number of variables.
    May make presentations to small audiences.
    Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
    May assign work to and direct less senior engineers and support personnel as required.
    Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
    Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.

    May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

    Skills:

    General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering. Knowledge of statistical methods.
    Ability to read and interpret blueprints, technical drawings and specifications;
    Ability to communicate clearly and concisely;
    May require the use of engineering test equipment, CAD, and/or various computer systems.
    Ability to operate effectively in a team environment.

    Education:

    Bachelors degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.
     
    Job Number: 11788
    Job Location: Canoga Park, CA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 8 Months+
    Start Date: January
    Input Date: 01/31/2017
    Firm Name: LOGIN CONSULTING SERVICES
    Attention: Tali Lerea
    Address: 300 CONTINENTAL BLVD STE 530
    City, State: EL SEGUNDO, CA 90245-5067
    Phone: 310/607-9091
    Fax Phone: 310/607-9818
    Website: www.loginconsult.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Doors Design Engineer

    Description:
    General Summary:
    Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

    Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 06/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Electric System Component Outfitting Interface Engineer

    Description:
    This position is located in Nagoya, Japan.

    Electric system component outfitting interface engineer
    • Mechanical/ structural interface engineering expertise
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044922
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

    Electrical Engineer II

    Description:
    PDS Tech is seeking an Electrical Engineer II for an open position in Arlington, TX

    In your role, you will:


    The Electrical Engineer 2 is responsible for designing and developing the electrical system components on a variety of flight simulator programs. Design responsibilities include creating system wiring diagrams, circuit breaker panels, interface diagrams, power distribution, and other items using CAD tools. The position will work closely with senior level electrical engineers.
     
    Duties:
    • Provide electrical design and development support on a variety of simulator programs.
    • Coordination of design activities with fellow electrical team members, mechanical engineering counterpart, and systems engineering to ensure that designs meet program requirements.
    • Support peer reviews for electrical designs.
    • Perform and document electrical load analysis.
    • Support development of Interface Control Documents (ICD)s.
    • Ability to work with a variety of I/O systems.
    • Knowledge of both analog and digital component design.
    • Support development of hardware subcontractor specifications.

     
    As our ideal candidate, you will meet the following requirements:

    Qualifications:
    • B/S in Electrical Engineering.
    • 4+ years of electrical engineering technical experience.
    • Experience with CAD software, preference to AutoCAD.
    • Systems integration experience.
    • Knowledge of FIO, Racktangle, & VMIC I/O is a plus.
    • Good computer skills including working knowledge of Microsoft Office.
    • Strong communication skills and good team work.
    Be able to obtain a DOD security clearance.

    Additional requirements: 
    Aerospace experience is required.
     
    At a minimum resumes should reflect experience with the following within the aerospace industry.
     
    •             Design and develop electrical systems on aircraft
    •             Produce wiring diagrams using computer aided design
    •             Experience with electrical load analysis

     
     
    Job Number: 1610060907
    Job Location: Arlington, TX
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FyJFAA0&URLSource=cjhunter

    Electrical Fabricator

    Description:
    PDS Tech, Inc.is seeking an ELEC. FLT CNTRL/SIM. LABS for an open position in Stratford, CT
    Responsibilities include:

    • Function: Assist with the buildup and installation of Flight Control, Avionic, and Simulation laboratory test facilities.
    • Job Duties:  Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    • Experience with electrical and electronic fabrication.
    • Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    • Experience with all the tooling and dies required to terminate mil-spec wires
    • Experience terminating EMI harness assemblies
    • Experience fabricating wire harnesses
    • Experience fabricating test sets
    • Experience using hand tools, mechanical and electrical
    • Experience with schematics and electrical diagrams
    • Evidence of Lockout Tag Out Authorized training

    Other Requirements:

    • Requires Safety shoes
    • Must be able to support extended shift operations, scheduled weekend work, possible shift changes.

     
    Job Number: 1610054244
    Job Location: Stratford, CT
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CHEnAAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Tech Designer

    Description:
    Job Description:

    Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

    Education / Experience:

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
     
    Job Number: 24331-1
    Job Location: North Charleston, SC
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Michelle Fox
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Wire Design & Installation (PA)

    Description:
    Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under minimal direction.

    Additionally...
    _Aerospace experience is desired, but not required.
    _Candidates with Automotive wire harness routing / MBD experience will be considered.
    _Prior experience with Wire Harness Installation design in the aerospace field is preferred.
    _Proven Advanced CATIA V5. Resume must clearly state the experience and prove level of proficiency for CATIA V5.
    _Proven Advanced Teamcenter(IPDM).
    _Proven Advanced MBD (Model Base Definition).
    _Mandatory Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and 3D Model based definition data packages using CATIA V5, the electrical workbench, and Teamcenter/ IPDM.
    _Must have am AA degree in Electrical Engineering Technology or Engineering.

    AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience. Additionally, AA Degree must be in either Engineering or Electrical Engineering Technology.
     
    Job Number: EEDesignPA
    Job Location: Ridley Park, PA
    Rate: up to $45/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 3+ months
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing Engineer - Engineer Consultant

    Description:
    UNIQUE SKILLS
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: -3D wire routing -EWIS -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -Cabin interior monuments -Seats
     
    Job Number: 16-654-88884
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 03/20/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing engineer

    Description:
    Electrical/Mechanical 3D Wire Routing Engineer – Engineer Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -3D wire routing
    -EWIS
    -Cabin Management System
    -Cabin Entertainment System
    -Cabin Lighting
    -Cabin Switch Controls
    -Telephone System -Satellite communications
    -Water System
    -Waste System
    -Cabin interior monuments
    -Seats

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6884
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Fabricators / EMI Harness Technicians

    Description:
    1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    - Experience with electrical and electronic fabrication.
    - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    - Experience with all the tooling and dies required to terminate mil-spec wires
    - Experience terminating EMI harness assemblies
    - Experience fabricating wire harnesses
    - Experience fabricating test sets
    - Experience using hand tools, mechanical and electrical
    - Experience with schematics and electrical diagrams
    - Evidence of Lockout Tag Out Authorized training

    Other Requirements:
    - Requires Safety shoes
    - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
     
    Job Number: 353185
    Job Location: Stratford, CT.
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 1 year +
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Emergency Electric Power Generation Integration Engineer

    Description:
    This position is located in Nagoya, Japan.

    Emergency electric power generation integration engineer
    • RAT hardware interface with aircraft expertise
    • Mechanical/ structural interface engineering expertise
    • Hydraulic system knowledge
    • Capability to review stress analysis by supplier/ partner
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044923
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FoAAI&URLSource=cjhunter

    Engineer - Payloads

    Description:
    This position is located in Nagoya, Japan.  Interior engineer who can manage PRA related to interior such as fluid leakage. Will lead and provide technical quality review of the development and documentation of mechanical and fluid systems and the thermal environment to establish system design.  Lead activities to validate and verify mechanical and fluid system requirements.  Leads the development, maintenance or modification of system components designs/proposal to provide installation and detail documentation.  Must be familiar with waste water management and fluid leakage.  Manages supplier development, test and production activities and directs supplier to optimize integration and achieve program goals.  Prioritizes, tracks performance and documentation of analysis of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate and assess the design.  Familiar with current FAA regulations regarding all interior components.
    • 15-20 years experience 
    • Bachelors Degree in Engineering
    • International experience desirable
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification

     
    Job Number: 1610044711
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rebecca Burrows
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i5000000036dHAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II

    Description:
    Required:CATIA V5 experience required with specific knowledge of GD&T and the application of the FTA tool. Aerospace experience preferred. SmarTeam experience preferred

    Essential Functions and Key Responsibilities:
    1) Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within current engineering protocols to design, develop and analyze aircraft structures, power plant component parts, mechanical and electrical systems and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.
    2) Analyzes and interprets engineering proposals to develop design for products.
    3) Reviews project documentation and proposed product specifications to determine design approaches.
    4) Confers with Project Management to clarify or resolve problems.
    5) Designs and develops structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports. 6) Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.
    7) Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.
    JOB QUALIFICATIONS: ENGINEER II Formal Education, Training, Professional Certification and Work Experience: Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
     
    Job Number: 13001BR
    Job Location: Tulsa, OK
    Rate: 34.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: APA SERVICES
    Attention: Lisa A
    Address: 4150 INTERNATIONAL PLZ STE 510
    City, State: FORT WORTH, TX 76109
    800 Phone: 888/272-7868
    Fax Phone: 800/285-8805
    Website: www.apaservices.net

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II

    Description:
    Engineer II

    Location: Canoga Park, CA
    Rate: $50.00 - $55.00/HR
    6 month contract


    ** This is not a Project Engineer role. Looking for candidates who have hands on mechanical experience. This position will be setting up lab experiments and managing data **
    ** Candidates must be U.S. Citizens **
    ** Permanent residents are not eligible for this role **
    ** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **


    Duties:
    - Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, igniters).
    - Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
    - Supports combustion devices hardware through the entire product life cycle.
    - Analyzes and verifies product design and performance for adequacy and reliability.
    - Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
    - Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.

    Typical responsibilities include:
    - Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features.
    - Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
    - Assignments typically have specified objectives and require the investigation of a limited number of variables.
    - May make presentations to small audiences.
    - Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
    - May assign work to and direct less senior engineers and support personnel as required.
    - Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
    - Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.
    - May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

    Skills:
    - General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
    - Knowledge of statistical methods.
    - Ability to read and interpret blueprints, technical drawings and specifications;
    - Ability to communicate clearly and concisely;
    - May require the use of engineering test equipment, CAD, and/or various computer systems.
    - Ability to operate effectively in a team environment.

    Education:
    - Bachelors degree in an appropriate discipline/science and two (2) years directly related experience as an associate engineer or equivalent combination of education and experience.
     
    Job Number: 6922
    Job Location: Canoga Park, CA
    Rate: $50.00 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 01/31/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II CA URGENT

    Description:
    Job Title: Engineer II
    Job Number: 158217/6006806
    Location: Canoga Park, CA
    Compensation: 55/hr max
    Assignment Length: 8 month contract

    Description:

    ** This is not a Project Engineer role. Looking for candidates who have hands on mechancial experience. This position will be setting up lab experiements and managing data **

    ** Candidates must be U.S. Citizens **** Permanent residents are not eligible for this role **** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **


    Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors).
    Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
    Supports combustion devices hardware through the entire product life cycle.
    Analyzes and verifies product design and performance for adequacy and reliability.
    Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
    Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.
    Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
    Assignments typically have specified objectives and require the investigation of a limited number of variables.
    May make presentations to small audiences.
    Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
    May assign work to and direct less senior engineers and support personnel as required.
    Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
    Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.

    May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.
    Skills:
    General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering. Knowledge of statistical methods.
    Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
    Ability to operate effectively in a team environment.

    Keywords:
    Education:
    Bachelors degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.
     
    Job Number: MB-6006806
    Job Location: Canoga Park, CA
    Rate: 55/hr max
    Duration: 9 month contract
    Input Date: 01/27/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III

    Description:
    JSG is looking for an Engineer III for a 6+ month contract opportunity in Irvine, CA!!!

    Job Description:
    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

    The ideal candidate will have strong, practical DO-178B development background in safety-critical real-time embedded software.

    Will have a principled knowledge of the DO-178B objectives but will be able to apply practical experience to efficiently meet them.

    Technically proficient with low-level software (e.g. device drivers, board support packages, built-in test), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware but will not be required to debug the electronics hardware.

    5-7 years of experience in commercial (i.e. non-military) DO-178B programs.

    Highly practical & resourceful, and have had a demonstrated experience developing high-performance embedded software for Industrial applications.

    Strong familiarity with Linux, and also with real-time operating systems (e.g. QNX Neutrino).

    Technically proficient with low-level software (e.g. device drives, board support packages), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware, and will be able to read schematics.

    Education:
    Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

    Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.

    Knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.

    Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

    Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
     
    Job Location: Irvine, CA
    Rate: Open
    Per Diem: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer II

    Description:
    Engineering Designer II

    Location: Canoga Park, CA
    Rate: $30.00 - $32.00/HR
    3+ month contract

    ** Candidates must have experience with Creo and Geometric Dimensioning & Tolerancing (GD&T) **
    ** Candidates must be U.S. Citizens **
    ** Permanent residents are not eligible for this role **
    ** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **

    Duties:
    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    There are 3 different skill sets that they would accept:
    1. Entry Level Designer
    -Less that 5 years of technical experience.
    -Experience with two or more of the following:
    a. Creo
    b Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
    c. Windchill
    d. Rocket
    e. Valve
    f. High Pressure
    g. Cabling
    h. Harness

    OR

    2. Engineering Designer II (Valve)
    -Creo
    -Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
    -Experience with two or more of the following:
    a. Windchill
    b. Rocket
    c. Combustion
    d. Valve
    e. High Pressure

    OR

    3. Engineering Designer II (Harness)
    -Creo
    -Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
    -Experience with two or more of the following:
    a. Windchill
    b. Harness
    c. Cable
    d. Line Routing
    e. Sensor

    Education:
    - BS degree in Engineering or equivalent. MS degree is desired.
     
    Job Number: 6907
    Job Location: Canoga Park, CA
    Rate: $30.00 - $32.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Input Date: 01/25/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    FAA Machinist

    Description:
    PDS Tech is seeking an FAA Machinist for an open position in Tulsa OK.
    • Assembles, repairs, and fabricates metal parts by operating mechanical equipment. Assembles parts into sub-units or complete units. Uses blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished product.

    As our ideal candidate, you will meet the following requirements:
    • Uses blue prints and design sketches to ensure the proper dimensions and tolerance levels of the finished product. Requires a high school diploma or its equivalent. May be required to meet certain certifications in field and to have at least 0-2 years of experience. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 

     
    Job Number: 1610054118
    Job Location: Tulsa, OK
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Shannon White
    Address: P O BOX 619820
    City, State: DALLAS, TX 75261-9820
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9636
    Email: cecjnrt@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGbSAAW&URLSource=cjhunter

    FSE PRA PA Lead - Mechanical System Group

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking a FSE PRA PA Lead for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    Able to manage of FSE PRA and CP G15 issues for pressurized area (PA)
    -Able to prepare of FSE PRA reports
    Complete FSE PRA verification activities 
    -Experience of zonal level analysis
    -Understanding of the regulatory requirements for fire safety in the pressurized area
    -Good communication with other ATA teams and suppliers
    -Experience of discussion with the authorities
    -Capability of documentation for T/C
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053085
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tTiJAAU&URLSource=cjhunter

    Flight Controls Engineer

    Description:
    PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

     
    •  
    • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
    • Applicable coursework or coop/intern experience to this position desired.
    • Working knowledge of generic CAD design tool processes is desired.
    • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
    • Experience with Kinematics in CATIA
    • Flight Controls Systems design experience a plus
    • Must have excellent verbal communication and presentation skills.
    • Proficient with Microsoft Office applications including Word and Excel.
    • Professional demeanor, troubleshooting and organizational skills are necessary.
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610045561
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chad Dunavant
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

    Flight Readiness Technician-SECRET

    Description:
    PDS Tech is seeking a Flight Readiness Technician for an open position in Palmdale, CA.

    In your role, you will:

    • Inspector Aircraft, Mechanic Electrical and Electronics, and Mechanic Flight.
    • Perform operational checkout of aircraft prior to and during preflight.
    • Inspect explosive and armament installations.
    • Maintain aircraft historical records.
    • Perform activities prior to flight status and final inspection and daily maintenance of completed experimental aircraft or major modification to experimental aircraft.
    • Inspect and/or perform bench and flight line operational checkout and inspect, trouble-shooting, adjustment and repair of electrical and electronic systems.
    • Inspect the calibration, adjustment, troubleshooting, repair and modification of electronic test equipment used exclusively by production and at times may be required to inspect the calibration, adjustment, trouble-shooting, repair and modification of other electronic test equipment as directed.
    • Perform aircraft and/or spacecraft bench or flight line operational checkout, trouble-shooting,adjustment and repair of any electrical or electronic system.
    • Fabricate, adjust, trouble shoot, repair and modify electronic test equipment.
    • Perform operational checkout of hydraulic systems and mechanical systems.
    • Diagnose and correct hydraulic and mechanical malfunctions.
    • Operate engines during run-ups and troubleshoot when needed.
    • Perform engine buildup as assigned. Install, repair, and replace tanks, power plants, generators, and aircraft engines.
    • Install or replace reservoirs, etc. and repair leaks in same.
    • Install or replace instruments such as fuel quantity, rate of climb and oil pressure indicators.
    • Splice, route, clamp, solder, and string tie wires or wire bundles.
    • Repair, install and hook up bomb, missile and rocket racks and pylons.
    • Install and load ejection seats and guns.
    • Install adjust, repair and replace structural parts and assemblies.
    • Modify parts such as skins, doors, aircraft frames, test panels, clips, brackets, angles and ribs without the aid of jigs and ixtures.
    • Modify aircraft components or aircraft support equipment.
    • Perform composite repairs
    • Must have Secret Clearance with the ability to obtain a Top Secret.

    As our ideal candidate, you will meet the following requirements:
    • Specialized vocational training, or an Associate's degree and 3 to 5 years work related F15 experience or an equivalent combination of education and experience.
    • Knowledgeable and skilled in F15 mechanical, structural, power plant, hydraulic, pneumatic, and electrical systems operation and flightline methods and common shop practices.
    • Knowledgeable and able to interpret and work from USAF technical orders (T.O.s), blueprints, sketches and written and verbal instructions.
    • Knowledgeable and able to use computer systems for office and shop applications.
    • Knowledgeable about and able to work in FOD controlled environments.
    • Knowledgeable and able to apply shop math.
    • Skilled in listening and interpersonal participation, and able to work with others as part of a team which includes giving and receiving feedback, and assisting others in completion of tasks.
    • Able to complete and maintain all required training and certifications needed to do your job efficiently.
    • Able to climb, stand, bend, kneel, reach, crawl, and walk on or around aircraft or work stands and in confined spaces.
    • Must have Secret Clearance with the ability to obtain a Top Secret.

     
    Job Number: 1610061554
    Job Location: Palmdale, CA
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Enrique Perez
    Address: 3201 CHERRY RIDGE DR STE A103
    City, State: SAN ANTONIO, TX 78230-4824
    Phone: 210/524-1496
    800 Phone: 866/570-1503
    Email: cecjsanantonio@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G32jAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 10/06/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

    The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

    Job Duties and Responsibilities (Essential Functions):

    � Provide instrumentation services: to include:
    o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
    � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


    Knowledge/Skills/Abilities:
    � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
    o Electrical and avionics design,
    o Data Systems Design Principles
    o Telemetry
    o Air data booms (straight nose and swivel-head)
    o Static trailing cones
    o Sensitive aircraft instruments
    o Cockpit displays
    o End-user interface
    o Portable test equipment such as hand-held stick force gauges
    o High-end GPS receivers and antennas for precise aircraft positioning
    o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
    o Pressure transducers
    o Flowmeters
    o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
    o Strain gauges, load cells, force transducers, torque sensors
    o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
    o Video recording equipment
    o Signal conditioners
    o Data acquisition systems and data loggers
    � Intermediate knowledge of flight test operations and flight certification.

    Level Requirements (Minimum):
    Education
    � Formal Instrumentation Training (Military or Civilian) � Preferred
    � BS in Engineering or equivalent experience

    Experience
    � 5+ years relevant technical experience
    � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    Flight Test Engineer - Test Pilot School Graduate - Contract-WIC03960-C

    Description:

    PDS is looking for an Flight Test Engineer - Test Pilot School Graduate:

    You have built on your strong academic results with a number of years of employment in a Flight Test Engineer role. You are now interested in expanding your horizons and continue your development as a Flight Test Engineer working in a Flight Test Center. You will have the opportunity to exercise the exceptional theoretical and practical knowledge gained through the conduct of a variety of flight test tasks. This knowledge will directly contribute to the safe and efficient conduct of flight test activities. These activities will support company development or certification testing for the wide range of company products. You will work side by side with Test Pilots to develop test plans and safety assessments and use your exceptional communication skills to liaise with other functional groups in the test center.

    Qualifications
    As our ideal candidate:     



    • You have 3-8 years of flight test experience
    • You have a degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering or graduated from a recognized Test Pilot School
    • You have demonstrated capacity and skills to prioritize and manage large amounts of information.
    • You have a strong understanding of common flight test procedures and requirements.
    • You have an appreciation for the existence of Transport Canada, FAA and EASA Certification processes and procedures (or equivalent military processes)
    • You have the interpersonal skills necessary to work effectively with a variety of individuals, departments and organizations.
    • You have well-developed written and verbal communication skills.
    • You will have an understanding that the flight test environment may require irregular work hours and does require travel.
    • You must be able to be obtain and maintain a FAA Class 3 Medical Certificate.
    • You have a significant number of airborne test conductor experience.


     







     






     
    Job Number: 1610061439
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G29GAAS&URLSource=cjhunter

    Flight Test Instrument Engineer

    Description:
    PDS Tech, Inc. is seeking a Flight Test Instrument Engineer for a position in Windsor Locks, CT
    • Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
    • Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
    • This can involve testing, data analysis, and interface with all aspects of the engineering department.
    • Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
    • Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met
    • Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures,
    • Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns. 

    • Experience with advanced instrumentation and data acquisition systems is required.
    • Knowledge of LabVIEW desired.
    • Experience should also include five years working on the testing of complex mechanical systems, including testing of components such as, heat exchangers, pumps, fans, & accumulators.
    • Must have the ability to work independently and be self-motivated.
    • Excellent communication skills, written and verbal are required.
    • Proficiency in Microsoft Office software products is required. 

     
    Job Number: 1610060263
    Job Location: Windsor Locks, CT
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fu6pAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/SEA
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 10/27/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/ORL
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 02/28/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Engineer

    Description:
    Ground Test Engineer - 2 Year Contract for our client in Stratford, CT!

    Role & Responsibilities

    Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.

    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.

    Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
    Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.

    A large portion of the job is oversight of supplier performed component qualification efforts.

    Previous experience in this area is recommended.
    Education:

    Bachelor of Science
     
    Job Number: 352694
    Job Location: Stratford, Ct.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Lab - Mechanical Subsystems

    Description:
    Johnson Service Group has 2 openings for a Ground Test Lab for a 2-year contract for our client in Stratford, CT!!!

    Description:
    Support the Design IPT by providing primary POC oversight of external supplier development of mechanical subsystems (such as floor armor panels or medical stretcher bearing litter, etc. as assigned).
    Participation in weekly supplier teleconference/web meetings to assure technical progress, facilitate communication and technical directions from the IPT lead, provide oversight to assure timely supplier data deliverables to support the subsystem design, development and testing per schedule. Provide status of project activities and deliverable item disposition by IPT member SMEs.
    Good ability to communicate work progress to the IPT CAM for Earned Value progress entry. The candidate must possess the ability and experience to provide technical oversight and review of supplier generated drawing package and 3D CATIAV5 (LCA) models.
    Ability to work in an IPT team environment (with system engineering, structural analysts, weight/balance engineer, materials, manufacturing, test, team members) with good communication skills is a must.
    Tracking status and monitoring progress of external design center drawing packages and similar tasking will be required.
    Education: Bachelor of Science Mechanical Engineering
     
    Job Number: 352682
    Job Location: Stratford, CT
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Ground Test Structural Lab Technician

    Description:
    PDS Tech,Inc. is seeking a  Test Lab Technician for an open position in Stratford, CT.
    First Shift Ground Test Structural Lab Technician 

    • Structural lab technician capable of working from engineering drawings with limited guidance to fabricate, assemble, install, diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support ongoing Engineering Ground Test Development programs. 
    • Strong mechanical background and experience associated with Rotary Wing Aircraft hydraulics, mechanics, electronics and data acquisition systems preferred. 
    •  


     
    • Must be able to read and interpret engineering mechanical drawings and fluid power schematics. 
    • Must be able to assist with the buildup and monitoring of engineering laboratory facilities. 
    • Must be able to assemble required fixtures and facility hardware. 
    • Must be able to work on elevated work platforms. 

     
    Job Number: 1610060225
    Job Location: Stratford, CT
    Per Diem: No
    Duration: 12 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FtvwAAC&URLSource=cjhunter

    HVAC/Mechanical Engineer

    Description:

    Primary Responsibilities:



    Candidate will be responsible for leading projects, defining scope and responsibilities, leading a team of engineers/designers



    Must ensure deliverables meet the scope and client expectations 



    Support procurement activities, including coordination with vendors and vendor drawing reviews



    Support contractor reviews, and installation planning activities



    Individual will travel globally for machine installation, check out and start up



    Candidate will plan the work, and track and report work in progress



    Will lead a design team for projects, and work with other disciplines to assure the project design is complete and accurate


    Qualifications:



     



    BS or MS in Mechanical or Chemical Engineering required



    7 to 10 years of related experience is required. Experience with an engineering consulting firm is a plus.



    Candidate should possess good experience on HVAC systems, utilities and fire systems design



    Knowledge of design problems of civil and industrial area of various kinds and, possibly, related to fire protection it would be considered an asset 



    Experience in setting, development, evaluation and implementation of projects for air conditioning systems, generation and distribution utilities in the industrial and civil sectors



    Knowledge of issues related to the pharmaceutical, consumer products, and chemical industry would be an advantage



    Knowledge of boiler systems is preferred



    Candidate must be able to calculate heat balance, air balance, mass balance, line sizing, and duct sizin



    Knowledge of international standards such as ASME, AMCA, ASHRAE , SMACNA ACGIL are required



    Should be able to select and size the boilers, fans, coils, duct, and other HVAC elements



    Candidate must possess good communication skills and be able to successfully interact with clients on global project



    Microsoft Office experience is required



    AutoCAD and SolidWorks experience is preferred



    Domestic and international travel will be required


     
    Job Number: 1610057836
    Job Location: Green Bay, WI
    Duration: 4 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Sue Van Pay
    Address: 110 PACKERLAND DR STE A
    City, State: GREEN BAY, WI 54303
    Phone: 920/499-9943
    800 Phone: 800/333-1389
    Fax Phone: 920/499-9067
    Email: cecjgreenbay@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FhcTAAS&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design, Electro-Mechanical Systems Engineer/TSII

    Description:
    UNIQUE SKILLS
    Basic understanding of Hydraulics as it applies to aircraft is required. Use of CATIA or similar 3D CAD system is required. Experience with Hydraulic Design preferred. Experience with CATIA tubing work bench is preferred. Experience with designing for compliance to FAR 25.1435 is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-629-78841
    Job Location: Southeast
    Rate: $60.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 07/13/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Hydromechanical -- Wing High Lift

    Description:
    Hydro-mechanical, Global 7000/8000

    Job location: Toronto, Ontario Canada

    Paid Travel
    Great Hourly Rates
    Direct Deposit
    Per Diem
    Tax Benefits
    Healthcare Options
     
    Job Location: Canada
    Input Date: 03/27/2017
    Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
    Attention: Erika
    Address: 150 RESEARCH BLVD
    City, State: ROCHESTER, NY 14623
    Phone: 585/441-9800 x106
    Email: erika.legrand@noramtecna.com
    Website: www.noramtec.com

    Ignition Source Specialist - Mechanical System Group

    Description:
    This position is located in Nagoya, Japan.

    PDS Tech is seeking an Ignition Source Specialist for the Mechanical System Design Group/ Fire Protection System Team, Regional Jet Development Project.

    Basic work scope is to help the team to demonstrate compliance with all applicable requirements and to generate the related documents required in the Type Certification Application and Approval processes.
     The main duties and responsibilities will be related to Ignition Source Minimization of equipment for fire prevention. This will include interfacing with all other aircraft function and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Ignition Source Minimization and Certification.
    FAR25.869(a)(1), 25.863(a) and AC25.863 draft
    • Proven ability to work to challenging deadlines.
    • New Product Introduction is desirable.
    • 10+ years engineering experience 
    • Experience leading multidisciplinary Teams
    • Certification knowledge.
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610053063
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tR8nAAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Inspector - Level 1 - Active Secret Clearance

    Description:
    ACTIVE CLEARANCE ONLY!!!!!
    This is a 1st shift position. Work shift is Monday to Friday 8 hours per day. Primary inspection of kits and shipments. Secondary role will be mechanical part inspection. Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts, rejects, or reworks defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.


    Mandatory Skills:
    Clearance Required. Mechanical inspection experience of complex machined parts, sheet metal parts, paint and stencil marking.


    Desired Skills:
    SOFCLS contract experience Strong and proven communication skills – written and verbal Proficient in Microsoft Office (e.g. Word, Excel, PowerPoint)

    Skill Matrix
    Mechanical inspection 4-5 years
    Kit and shipping inspection 4-5 years
     
    Job Location: Lexington, KY
    Rate: 23-26/hr
    Duration: 6 months
    Input Date: 01/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jung Bahk
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Lab Technician

    Description:
    JSG is looking for an Instrumentation Lab Technician - First Shift Needed in Stratford, CT for a 12+ month contract opportunity!

    Job Duties:
    Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems and Sensors in support of Ground and Flight Test Programs.
    Must be able to accomplish the planning, build up and termination of cable harnesses associated with Instrumentation Systems.
    Must be able to assist in performing system calibrations and check outs with the Test Engineer.

    Must be able to support Sensor Calibrations Experienced Instrumentation Technician in both Rotary Wing Structural Ground and Flight Test.

    Should possess a strong Mechanical and Electrical background familiar with Strain Gages and their circuitry, thermocouples, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation
     
    Job Number: 353388
    Job Location: Stratford, CT.
    Rate: open
    Per Diem: Yes if qualified
    Overtime: Possible
    Duration: 12 Month +
    Start Date: ASAP
    Input Date: 01/30/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Integration Specialist Technician

    Description:
    PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
    In your role, you will:

    • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
    • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
    • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
    • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
    • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
    • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
    • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
    • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
    • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
    • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
    • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
    • Troubleshoot, fault isolate and document nonconformances.
    • Perform related rework and approved repair necessary to accomplish assignments
    • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
    • Perform self examination and inspection as certified and required.
    • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
    • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
    • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
    • Set up and maintain charts, logs, records and reports.
    • Maintain licenses, permits and certifications required to perform assigned work.
    • Perform other duties as assigned within the general job classification
    • Maintain a safe clean and orderly work area.

    As our ideal candidate, you will meet the following requirements:
    • High School Diploma or GED
    • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
    • Must be a U.S. Citizen.





     
     
    Job Number: 1610054052
    Job Location: Huntsville, AL
    Per Diem: No
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker

    Description:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations is preferred.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
    7. Actively works to improve daily processes and ensures all work meets customer requirements
    8. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
     
    Job Number: 24-145
    Job Location: Savannah, GA
    Rate: $55 to $57
    Per Diem: YES
    Overtime: YES
    Duration: 1 year+
    Start Date: ASAP
    Input Date: 01/30/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker (Catia V5)

    Description:
    Ideal Candidates will have 2-D Drawing and 3-D Model Checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System
     
    Job Number: 24-173
    Job Location: Savannah, GA
    Rate: $58 to $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 05/11/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Land/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    Landing Gear System requirements verification and validation (ARP4754).
    Prepare and review test specifications, procedures and test reports.
    Support flight test and ground test activities.
    Analyze test data and evaluate system operation.
    Provide engineering input to technical reviews
    Identify and communicate technical risks for the landing gear system
    Support overall certification effort for the landing gear system

    Desired Qualifications:

    Landing Gear/Brakes anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    Aircraft flight test certification program experience.
    Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    Knowledge of materials, mechanical systems, and failure mechanisms
    Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Ability to represent the client professionally and positively during client interactions and meetings.
    Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: LA
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 01/08/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lynn Launer
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: open
    Per Diem: yes
    Overtime: no
    Start Date: asap
    Input Date: 03/15/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Liaison Engineer/MRB Engineers

    Description:
    • Bachelors Degree in Mechanical or Aeronautical Engineering from an ABET accredited program is required
    • 4-6 years of Material Review Board experience desired
    • Must have Aerospace/Military MRB (not commercial)
     
    Job Number: GKN-MRB
    Job Location: St. Louis, MO
    Rate: 70.00-78.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 months+
    Start Date: ASAP
    Input Date: 02/21/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    MASS/F&E Engineer

    Description:
    PDS Tech is seeking a Mass Engineer for an open position in Shelton, CT
    Support the Design IPT by providing primary POC oversight of external supplier development of mechanical subsystems (such as floor armor panels or medical stretcher bearing litter, etc. as assigned). Participation in weekly supplier teleconference/web meetings to assure technical progress, facilitate communication and technical directions from the IPT lead, provide oversight to assure timely supplier data deliverables to support the subsystem design, development and testing per schedule. Provide status of project activities and deliverable item disposition by IPT member SME’s. Good ability to communicate work progress to the IPT CAM for Earned Value progress entry.
     





    Bachelor of Science Mechanical Engineering






     
    Job Number: 1610054755
    Job Location: Shelton, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Ryan Bushey
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i500000004BgmAAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB/Liaison Engineers - Mechanical Systems

    Description:
    *Bachelors of Science degree in Mechanical Engineering
    *6+ years experience of MRB type design of Mechanical Systems including any combination of Landing Gears, Hydraulics, Flight Controls, Doors and Air Systems.
    Knowledge, Skills and Abilities:
    1. Working knowledge Mechanical Systems concepts and Standard Repair Methods (SRM).
    2. Working knowledge of CATIA V5, AutoCad and XAO preferred.
    3. Working knowledge of SAP preferred.
    4. Proficiency in Microsoft Office Suites (Word, Excel, PowerPoint) and Lotus Notes.
     
    Job Number: MRB-Hond
    Job Location: Greensboro, NC
    Rate: $55.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 01/30/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    Machinist - FL

    Description:
    Chipton Ross is seeking a Model Maker in Orlando, FL.

    Job Description:
    Designs and fabricates tools and parts in metals and plastics through machining and heat-treating operations. Works from blueprints, drawings, or verbal instructions using math and basic computer skills. Maintains model shop machinery. May enter data from blueprints or databases into CAD/CAM system, generate numerical control program, and transmits program to machining center. May monitor and verify quality in accordance with statistical process or other control procedures.Sets up and operates a variety of machine tools such as lathes, milling machines, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

    Mandatory Skills:
    Precision machining involving set up, programming and operation on a variety of CNC machines using a multitude of machine tools. Must be able to interpret and apply Geometric Dimensioning and Tolerancing (GD&T). Must have the ability to work first or second shift.

    Desired Skills:
    Technically trained with an extensive machining background in a variety of metals and other materials. Prior experience with CAD/CAM programs and posting to CNC machines.

     
    Job Number: 161407
    Job Location: Orlando, FL
    Rate: Up to $32.93 DOE
    Duration: 1 year
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Brent Sizemore
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: bsizemore@chiptonross.com
    Website: www.chiptonross.com

    Machinist-FL

    Description:
    Chipton Ross is seeking a Model Maker in Orlando, FL.

    Title: Model Maker - Level 3
    Work Location: Orlando, FL

    Job Description:
    Designs and fabricates tools and parts in metals and plastics through machining and heat-treating operations. Works from blueprints, drawings, or verbal instructions using math and basic computer skills. Maintains model shop machinery. May enter data from blueprints or databases into CAD/CAM system, generate numerical control program, and transmits program to machining center. May monitor and verify quality in accordance with statistical process or other control procedures.Sets up and operates a variety of machine tools such as lathes, milling machines, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions. Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required. May modify numerically controlled programs on numerically controlled (NC) machines. May monitor and verify quality in accordance with statistical process or other control procedures. Typically requires completion of a formal apprenticeship or equivalent training and experience.

    Mandatory Skills:
    Primary duty will be assembly of mechanical hardware. Typical assembly tasks include adhesion bonding and installation of threaded inserts, pins, bushings, nutplates, and rivets. Duties will also consist of the manufacturing of sheetmetal & machined products through the use of power shear, power brake, power roll, CNC punch, manual mill, lathe and small tools. Use of various hand tools such as torque wrenches, hand-taps, pneumatic riveters and measuring instruments. Must be able to interpret and apply Geometric Dimensioning and Tolerancing (GD&T) from blueprints and work to military and aerospace specifications. Must have ability to work 1st or 2nd shift.

    Desired Skills:
    Technically trained with an extensive sheet metal manufacturing background.


     
    Job Number: 161410
    Job Location: Orlando, FL
    Rate: Up to $32.93 DOE
    Duration: 1 year
    Input Date: 11/23/2017
    Firm Name: CHIPTON ROSS
    Attention: Juan Saldarriaga
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: jsaldarriaga@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintenance Controllers - Addison, TX

    Description:
    STS AeroStaff Services is currently hiring Maintenance Controllers for open positions in Addison, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Perform accounting support duties including processing of vouchers, reconciling accounting transactions, and maintaining files. Applies accepted procedures to the preparation and maintenance of financial and business transaction data, and prepares reports to ensure accurate accounting records.

    Job Duties:

    • The Maintenance Control team provides surveillance, control, and direction for all aircraft maintenance 24 hrs a day, 7 days a week as well as effects aircraft repair.
    • Monitor the daily operation relative to plan, coordinating related maintenance activities and providing assistance in preventing or minimizing schedule interruptions due to maintenance requirements.
    • Coordinate with Flight Following, Flight Crew, Mechanics, Planning and Stores, the requirements to maintain flight schedule in accordance with procedures in the GMM
    • Develop total nightly workload packages and balance workload with regard to required and available resources.
    • Initiate MEL tracking numbers track MEL to keep within limits and log information.
    • Keep maintenance stations informed of MEL item coming through their respective stations.
    • Perform scheduled maintenance to keep aircraft in peak operating condition.
    • Initiate repairs/replacement to acceptable or approved technical data and instructions.
    • Tests, inspects and checks all repairs/installations to ensure proper operation. Conducts repairs in a time-efficient manner.
    • Provide technical assistance to contract agency maintenance personnel to assist with the maintenance operation.
    • Plan and schedule lower level maintenance checks and non-routine maintenance work.
    • Initiate, prepare and inform QC of MEL escalation.
    • Prepare reports concerning pertinent aspects of aircraft maintenance operation and for identification of issues requiring special attention.

    Qualifications:

    • Certificated A&P mechanic.
    • 3+ years’ experience in heavy line maintenance of transport category aircraft, preferablyDC-9/MD-80/737 series.
    • Familiarity with FAA 121/145 regulations.

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 35101
    Job Location: Addison, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    Manufacturing Engineer

    Description:
    PDS Tech, Inc. is seeking a Manufacturing Engineer for an open position in Windsor Locks, CT.
    • Manages high complexity design and planning of layout for assembly and materials handling.
    • Adaptation of machine or equipment design to factory and production conditions.
    • Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.

    Job Responsibilities:

    • The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
    • Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
    • Develop the specific methods and instructions for manufacture and/or assembly of products.
    • Determine manufacturing feasibility to: o Identify potential fabrication problems o Draw attention to special fabrication requirements o Ensure the latest developments in manufacturing technology are considered in the design phase.
    • Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
    • Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
    • Establish touch labor cost targets on shop/lab activities as requested.
    • Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process.
    • Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
    • Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
    • Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
    • Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
    • Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
    • Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification

    Education:
    • Candidate must possess a BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
    • Background courses in mechanical design and/or manufacturing courses are beneficial.

    Experience Preferred:

    • 10 years’ experience working on the manufacture of complex mechanical systems is desirable
    • Working knowledge of Microsoft Windows environment and experience in using any type of Publishing System
    • Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
    • Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
    • Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
    • Experience with a MRP (Manufacturing Resource Planning) system is desirable.

     
    Job Number: 1610059895
    Job Location: Windsor Locks, CT
    Per Diem: No
    Duration: 24 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Chris O\'Connor
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FsdLAAS&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer

    Manufacturing Engineer must have experience with aircraft major structural assemblies/installations. Experience with Soloumina, Smarteam, Catia V5 preferred.
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Level 3

    Description:
    Manufacturing Engineer - Level 3

    Location: Clearwater/Pinellas Park/Oldsmar, FL
    Duration: 1 Year Contract
    Pay Rate: $35/hr - $45/hr (DOE)
    Shift: 2nd, 9/80 ; Overtime: Yes
    *Must be a U.S. citizen* *No clearance needed*

    Job Description:
    -Provide manufacturing engineering support to the build of circuit card assemblies as a contributing member of an integrated product team (IPT).
    -Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and process related assembly issues as required.
    -Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer.
    -Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents.
    -Support the design change management activities of the IPT.
    - Analyze process defect data and trends and help define and implement corrective actions.
    -Perform and communicate non-recurring engineering activities during production start-up, which includes tooling and fixture design, development of machine automation programs, and configuration of the manufacturing bill of materials for manufacturability.
    -Interface with technical counterparts in other organizations both within and outside Clearwater Operations.

    Mandatory Skills:
    • IPC-A-610 training or J-STD-001 (MANDATORY)
    • Minimum 5 years manufacturing engineering experience in a technical role supporting the design and manufacturing of circuit card assemblies within an Integrated Product Team type of work environment.
    • Skill with surface mount technology and automated SMT build equipment.
    • Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
    • Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
    • Willingness to work overtime and during off-days occasionally as required to support production operations.

    Desired Skills:
    • Bachelor’s degree from an accredited University in Engineering.
    • Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to circuit card assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
    • Strong technical understanding of circuit card assembly producibility and process flow.
    • Specific experience with SAP and Solumina manufacturing execution system. Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
    • Experienced user of MS S/W applications including MS Word, Project, Excel, Visio, and Power Point.
    • MYDATA SMT pick & place machine equipment
    • Ability to read and interpret Engineering Drawings, and to use viewing and editing tools such as AutoCAD or Corelis.
     
    Job Number: 6946
    Job Location: Clearwater, FL
    Rate: 35.00-45.00
    Per Diem: Possible
    Overtime: Yes
    Duration: 1 year
    Start Date: ASAP
    Input Date: 02/23/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Secret Clearance

    Description:
    **Active Secret Clearance**
    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Skill/Experience/Education
    Mandatory:

    Working experience with SAP, engineering documents, specifications and policies. Must have experience working in a manufacturing environment and have a strong understanding of engineering principles including mechanical, industrial, or operations.

    Desired:
    Thorough knowledge of Electrical/wiring manufacturing and associated processes. Tooling, fabrication and assembly manufacturing processes and procedures is a plus. Demonstrated ability to utilize knowledge/experience in the preparation of all document types within the group.

    Skill Matrix
    CATIA 4-5 Years
     
    Job Number: JB - 0329
    Job Location: Palmdale, CA
    Duration: 10-12 months
    Input Date: 01/12/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jung Bahk
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    UNIQUE SKILLS
    Solumina and Catia experience preferred

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    POSITION PURPOSE
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
    3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    4. Investigate and assist in preparing justification for equipment and facility requests.
    5. Perform productibility studies from engineering drawings.
    6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
    8. Incorporate Lean Manufacturing Methodology into existing and future processes.
    9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
    10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
    11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
    12. Support all Safety, Sustainability and Ergonomic Initiatives.
    13. Aid in development and maintenance of Business Continuity Plan.

    ADDITIONAL FUNCTIONS
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
    3. Perform other duties as assigned.

    OTHER REQUIREMENTS
    1. Proven knowledge of Lean and/or Six Sigma principles.
    2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
    4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 16-651-88624
    Job Location: Southeast
    Rate: $50.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract


    Unique Skills:
    SAP, Solumina, Electrical systems knowledge

    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 6940
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 01/31/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Manufacturing Engineer II

    Description:
    PDS Tech is seeking a Manufacturing Engineer II for an open position in Savannah, GA.

    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning). 

    Principal Duties and Responsibilities:

    Essential Functions:
    1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
    3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    4. Investigate and assist in preparing justification for equipment and facility requests.
    5. Perform productibility studies from engineering drawings.
    6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
    8. Incorporate Lean Manufacturing Methodology into existing and future processes.
    9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
    10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
    11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
    12. Support all Safety, Sustainability and Ergonomic Initiatives.
    13. Aid in development and maintenance of Business Continuity Plan. 

    Additional Functions:
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
    3. Perform other duties as assigned. 

    Other Requirements:
    1. Proven knowledge of Lean and/or Six Sigma principles.
    2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
    4. Lean Six Sigma Greenbelt Certification or higher preferred.

     


    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.



    Unique Skills:



    Must have experience as a floor liaison Mfg. Engineer at an Aerospace OEM. Proficiency in Solumina, Catua, SAP, and Microsoft Office software highly preferred.




    PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.


     
    Job Number: 1610051893
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 11/23/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rodney Kinlaw
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000001siRgAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0329
    Job Title: Manufacturing Engineer
    Location: Palmdale, CA 93599
    Compensation: 45-65/hr (DOE)
    Assignment Length: 10 + month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    Non exempt
    1st shift

    Description:

    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

    Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.

    Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

    May incorporate inspection and test requirements into the production plan.

    Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

    Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.

    Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Skill/Experience/Education
    Mandatory:

    Working experience with SAP, engineering documents, specifications and policies.

    Must have experience working in a manufacturing environment and have a strong understanding of engineering principles including mechanical, industrial, or operations.

    Desired:

    Thorough knowledge of Electrical/wiring manufacturing and associated processes.

    Tooling, fabrication and assembly manufacturing processes and procedures is a plus.

    Demonstrated ability to utilize knowledge/experience in the preparation of all document types within the group.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    CATIA 4-5 Years No
     
    Job Number: SW-0329
    Job Location: Palmdale, CA
    Rate: 45-65/hr DOE
    Duration: 10 months +
    Input Date: 01/13/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Technician II

    Description:
    Manufacturing Technician II

    Location: Burnsville, MN
    Pay Rate - $25 – 35/hr
    1 year contract
    2nd Shift Monday-Thursday 3:00pm - 1:30am

    Technical Tasks
    Perform technical tasks based on written or verbal instructions. Utilize technical assets.
    -Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
    -Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
    -Participate on and/or lead project teams.
    -Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
    -Structure modifications to programs w/ Visual Basic or other SW packages/programs preferred.
    -Design simple circuits, fixtures, or mechanical parts.
    -Develop software programs to run NC machines.
    -Provide technical solutions to engineering.
    -Participate on safety initiatives.

    Manufacturing Activities
    Support manufacturing activities through the resolution of production problems, fabrication of complex hardware, equipment and training.
    -Self-manage work flow throughout area with minimal guidance, to achieve team goals.
    -Estimate labor, material, and manufacturing costs for the building and repair of product or process enhancement.
    -Identify and correct minor process, material, design, or equipment problems
    -Actively participate in material review activities including troubleshooting of non-conformances.
    -Perform mid-level (moderately complex) testing or mechanical operations on production/repair hardware including troubleshooting to component level.
    -Provide skill specific training to improve technique and/or understanding of theory of operation.
    -Fabricate complex equipment, hardware or prototypes.

    Documentation
    Provide accurate recording of time changes, test data. Parts usage, etc. This requires data interpretation.
    -Generate reports from test results and communicate results or take immediate corrective action to assure proper disposition of items in question.
    -Write test procedures and manufacturing work instruction for complex or detailed assembly or test operations.
    -Utilize multiple databases to create/use necessary information to provide information for decision making requiring judgment.

    Minimum Education Requirement:
    Associate’s/Technical Degree
     
    Job Number: 6853
    Job Location: Burnsville, MN
    Rate: $25.00 - $35.00/HR
    Per Diem: No
    Overtime: Possible
    Duration: 1 yr
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mass Properties Engineer

    Description:
    Understanding of Mass Properties calculations (mass, CG, inertias) and validation - Broad working knowledge of engine structural/mechanical design principles - Understanding of Propulsion System Design Trade-Studies (Performance/Weight/Cost) -
     
    Job Number: MD 37000
    Job Location: East Hartford, CT
    Rate: 65
    Per Diem: Split
    Duration: 18 months
    Start Date: 2-3 weeks
    Input Date: 01/11/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Jim Pyle
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer III - MP&P Engineer (PA)

    Description:
    MP&P Engineer 3 Assignment
    Defines requirements for materials, parts and processes used in the manufacture of products. Produces specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Works under general direction.

    Additionally…
    The main focus of this assignment will be CH47 Chinook factory support. This includes being co-located on the factory floor working with existing processes and equipment associated with the rotorcraft production line, identifying effective manufacturing technology (processes, tools and equipment) to accomplish the build work statement, supporting repair of defective conditions on the aircraft, project management skills, specifically for projects that develop and insert manufacturing technology into current or future build process, and daily interaction with shop personnel. Identify safety and ergonomic improvements. Provide portable and perishable tool recommendations.

    MORE SPECIFIC ASSIGNMENT QUALIFICATIONS:
    _Ability to work with factory mechanics, as well as other organizations such as ME, QA, IE and Engineering are required.
    _Initiative, teaming, planning, project management and communication skills are required.
    _Ability to innovate and strategize, as well as work with details to drive projects to successful completion and implementation.
    _CAD, CATIA, or Solid Works, MS Office, 3D printing are required—Must state the level or experience and training in each of these skills.
    _Assignment may require occasional domestic travel of approximately 5% from Boeing to Suppliers facilities.
    __Assignment requires ability to work overtime and/or different shifts when needed.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: MP&Ppa
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration:</