Job Search Results

700 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/05/21 Monday 06:13AM Pacific Time by ContractJobHunter. )

Listings 1 - 700

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 05/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Interiors Design Engineer

Description:
Aircraft Interiors Designers Needed. Catia v5
Location: Mojave, CA
Duration: 12+ months
Rate: $55-65/hr
Good overtime potential

MUST BE US PERSONS.

Aircraft Interiors Design Engineer

We are looking for senior level interior design engineers with experience doing conceptual design and preliminary design phase, initial sizing for developing head liners, trade studies, strong with Catia V5, have some background in mechanisms and moving parts, involved in engineering requirements definition and can mentor younger engineers.
BSME/BSAE is preferable, but not required.

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $55-65/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Aero Thermal Fluids Analyst

Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
1 year contract position


**Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years.**

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible **

Duties:
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbo machinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 6839
Job Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Per Diem: Split
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices FL 4 openings!

Description:
Job Title: Aero Thermal Fluids Analyst
Job Number: 157623/5922867
Location: Jupiter, FL
Compensation: 61.79/hr max
Assignment Length: 12 month contract

Description:


Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years. They must be able to obtain and maintain a U.S. Security Clearance at the appropriate level **

** If candidates do not have a current Secret clearance, they must be able to obtain an Interim clearance pending issuance of a full Secret clearance **

** Candidates must be U.S. Citizens **

** Must be able to satisfy federal government requirements for access to government information. Permanent residents are not eligible for this role. Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not eligible


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.
Keywords:
Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering # of Positions: 3
 
Job Number: MB-5922867
Job Location: Jupiter, FL
Rate: 61.79/hr max
Duration: 12 month contract
Input Date: 06/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Air Systems ECS

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with Avionics systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Experience in as many of the following as possible:
o Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
5+ years relevant work experience related to avionics systems integration and certification.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: lt
Start Date: open
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Avionics Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.
The individuals in this role will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.
The ideal candidate will possess aircraft certification experience with a specialty in electrical systems and 5 years of relevant work experience related to avionics systems integration and certification.

Responsibilities of the Aerospace Avionics Engineers

● Coordinate system test and certification requirements.
● Support flight test and ground test activities.
● Analyze test data and evaluate system operation.
● Prepare test reports.
● Domestic and occasional international travel is required.

Requirements of the Aerospace Avionics Engineers

● Experience in Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), ADS (Air Data System), EICAS, Autopilot, AFCS
● 5+ years relevant work experience related to avionics systems integration and certification.
● Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
● Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Seattle, WA
Rate: open
Per Diem: possible
Duration: LT
Start Date: open
Input Date: 03/15/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace - Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:
� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors
Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Cab/Fl
Job Location: Seattle, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: open
Input Date: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: Seattle, WA
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Essential Functions:
Coordation experience with a specialty in electrical systems.inate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elect/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
They are seeking an Aerospace engineer with electrical systems experience to join the team. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.
Essential Functions:
Coordinate system test and certification requirements.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Understanding of power distribution system, failure cases, load shedding, electrical power management
Understanding of EWIS and wiring a plus
5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: LA
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer, Electrical

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are seeking Electrical engineers with systems experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in electrical systems.

Essential Functions:
� Aerospace Electrical Engineer shall coordinate system test and certification requirements.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.

Desired Qualifications:
� Electrical Engineer will have a deep understanding of power distribution system, failure cases, load shedding, electrical power management
� Understanding of EWIS and wiring a plus
� 5+ years relevant work experience related to electrical systems integration and certification. Should include experience with power generation, control, distribution and integration with the aircraft.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: Elec/Orl
Job Location: Orlando, FL
Per Diem: possible
Overtime: possible
Duration: lt
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Project Engineer

Description:
Aerospace Project Engineer

Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

Seeking a Project Engineers with Flight Test experience to join the team in Seattle, WA. The ideal candidate will possess 4+ years of experience in one of the following disciplines.
Flight Test Management Software
Flight Test Trouble Shooting Processes
Flight Test Equipment Management / Coordination
Aerospace Project Engineering
Bachelor�s Degree in Software Engineering, Aerospace Engineering, Mechanical Engineering, Project Management or a related subject (or equivalent combination of work and experience).
Four or more years of aerospace and/or project management experience. Flight Test environment preferred, but not required.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Moses Lake, WA
Per Diem: Split possible
Start Date: asap
Input Date: 01/08/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Senior Test Equipment Project Engineer – Contract

Description:
Aerospace Senior Test Equipment Project Engineer – Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Senior Test Equipment Project Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA. Client is open Contract, long term contract or contract to hire.

Must be a US Citizen or Person. No visa or student visa candidates considered.

Principal Responsibilities:

• The functional expertise required for this Sr. Test Equipment Project Engineering position is primarily in the field of Mechanical Engineering with significant experience required in the areas of project management.
• The Senior Test Equipment Project Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.
• Must frequently solicit the aid and support of others to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• Prior experience understanding the design, analysis, and development of complex electrohydraulic, electromechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering required, an advanced degree preferred

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61990
Job Location: Rockford, IL Illinois
Rate: Market rate
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Systems Engineer

Description:
Aerospace Test Systems Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Systems Engineer supporting requirements and analysis. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA.
Customer is open to Contract- long term contract or contract to hire.

Aerospace Test Systems Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Systems Engineer supporting requirements and analysis. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications.

This is a contract to hire position located in Torrance, CA.

Principal Responsibilities:

• The functional expertise required for this Test Requirements and Analysis Engineering Position is primarily in the field of Systems Engineering with significant experience required in the areas of Requirements Definition, Integration, V&V, modeling & simulation & with project management.
• Build a project plan for the successful testing of new products from start to finish.
• Conceptualize and design of automatically controlled mechanical/hydraulic test rigs.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.
• Must frequently solicit aid and support to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• 5+ years’ experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering or related field required

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/


Principal Responsibilities:

• The functional expertise required for this System Engineer Test Requirements and Analysis Engineering Position is primarily in the field of Systems Engineering with significant experience required in the areas of Requirements Definition, Integration, V&V, modeling & simulation & with project management.
• Build a project plan for the successful testing of new products from start to finish.
• Conceptualize and design of automatically controlled mechanical/hydraulic system test rigs.
• Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
• The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.
• Must frequently solicit aid and support to achieve difficult schedule objectives.
• The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

• 5+ years’ experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro pneumatic – servo mechanisms.
• In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor’s degree in Mechanical Engineering or related field required

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61987
Job Location: Rockford, IL Illinois
Rate: Comensurate
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Equipment Engineer - Contract

Description:
Aerospace Test Equipment Engineer - Contract

On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Test Equipment Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydro mechanical aerospace components and systems for government and commercial applications.

Must be a US Citizen or US Person to be considered. No visa or student visa candidates condescended

This is a contract to hire position located in Torrance, CA. Customer is open to Contract- Long term contract or contract to hire.

Principal Responsibilities:

-Primarily in the field of Electrical Engineering with significant experience required in the areas of position control and power electronics and project management.

Project management, Test Equipment design, fabrication and verification are key experiences needed.

-Primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control test equipment used on military, commercial and NASA vehicles and equipment.
-The incumbent will operate either independently or as part of a design/development team, which includes other Department engineers.- Primary concerns are system or component performance and integration, both being achieved within budget and prescribed schedules.
-The incumbent will coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments.
-Responsible for communicating with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design.
-Must frequently solicit the aid and support of others to achieve difficult schedule objectives.
-The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product-engineering technicians.

Experience & Qualifications:

-Prior experience understanding the design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro- pneumatic servo-mechanisms used in testing products.
-In addition, he/she must have a proven record of successful development programs working as a part of a project team in this field.

Education: Bachelor- degree in Mechanical Engineering or related field

Compensation: Highly competitive with benefits

Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship. No visa or student visa candidates considered.

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.

Additional Job Postings: http://www.ingeniumtech.com/jobs/
 
Job Number: 61747
Job Location: Rockford, IL Illinois
Rate: Market
Per Diem: no
Overtime: possible
Duration: 6-12 months
Start Date: 3 weeks
Input Date: 01/09/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Systems Engineer (ECS)

Description:
Our client is seeking an Aerospace engineer with Air Systems/ECS experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in environmental control systems.

Essential Functions:
� Coordinate system test and certification requirements.
� Author flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.
� Domestic and occasional international travel is required.
Desired Qualifications:
� 5+ years� experience with CPCS (Cabin pressurization control system), flow balancing, smoke penetration and detection, valve and control logic, failure cases, OHD (overheat detection), cabin pull-up/pull-down, hot and cold weather deployments
� Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
� Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
� Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: ECS/SEA
Job Location: seattle, wa
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 02/28/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Cabin Interiors Completions Design and Check, Mechanical Engineering

Description:
Engineer Consultant/Mechanical Engineer/Completions Checker (A/C Cabin Interiors)

Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Long Term contract
Shift: 1st Shift


**Must be a U.S. Citizen or permanent resident**


Unique Skills:
- Experienced in validating 3D models, assemblies, installations and drawings produced by design engineers.
- Validation should be per engineering core principles, design standards, processes and best practices
- Experienced in validating designs for form/fit/function to meet customer and design criteria, and should be knowledgeable with aircraft interior floor plan configurations with custom options and baseline cabinetry.
- Knowledgeable with cabinetry designs for ease of manufacturing & installing.
- Should be experienced & a participant in improving and developing processes for checking or design consistencies, and skillful to train others.
- Should be comprehensive and proficient in researching technical data e.g. hardware, machined parts, weldments, materials, finishes, consumables and standard part usage, & appropriate design application.
- Should have Designer experienced with conceptual design development, cabinetry theory, creating 3D models and drawings / drafting.
- Experience with aircraft engineering documents & process change(s).
- Should be experience and efficient in utilizing CATIA V5, SmarTeam, AutoCAD, Excel, Word and Power Point.
- Experienced in documenting issues to help clarify 'back check' comments to designer engineers.
- Competency with Weight & Center of Gravity Analysis.
- Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
- Additional responsibilities are out lined in the TS I job description and as assigned by the Mechanical Engineering Group Head.

Job Description:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6876
Job Location: Savannah, GA
Rate: $55.00 - $63.00/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Engineers

Description:
Aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s is seeking multiple Aircraft Systems Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

Seeking a contract or fulltime engineers to join the team. At least five years� experience with one or more of the following: Electrical, Avionics, Flight Controls, ECS, Protective Systems (Anti Ice, Fire Protection), and Hydro Mechanical Systems (Landing Gear, Hydraulics). The ideal candidate will possess relevant aircraft systems integration and certification experience.
� Electrical
� Avionics
� Flight Controls
� Air Systems (ECS)
� Protective Systems (Anti Ice, Firex)
� Landing Gear
� Hydraulics

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analysis

Description:
REQUIRED SKILLS
Education: BSME/Aerospace Eng. required, MS preferred

WORK EXPERIENCE
10+ years experience in airframe structural analysis of metallic primary structures. Additional airframe advanced composite primary structure experience preferred. Experience with finite element modeling and analysis and familiarity with airframe structural testing and instrumentation practices. In-depth application of fatigue concepts and methodology. Familiarity with fracture mechanics principles/ methodology.

SOFTWARE EXPERIENCE
NASTRAN/PATRAN or equivalent FEM, Mathcad or equivalent math tools, Stress and strain based fatigue methods, MS Office applications and familiarity with Catia.

DUTIES AND ESSENTIAL FUNCTIONS
The Airframe Structural Analysis Core Competency Unit is responsible for insuring the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments. Structural integrity responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support. In fulfilling its function, adherence to the appropriate design criteria and other directives mandated by the customer and or regulatory agencies is strictly maintained. Specific functions include: Static structural analysis and Margin of Safety determination, finite element modeling of airframe structures using PATRAN/NASTRAN and stress-life fatigue analysis using Sikorsky standard work procedures.

US Citizenship (No dual citizenships.) required.
Over Time not guaranteed.
 
Job Number: 16-637-1394
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone Lead Coordinator

Description:
Airframe Systems Integration Zone Lead Coordinator/TSII
Savannah, GA
Rate: $65-$70

Unique Skills:

The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions: 1. Manages Installation Design of primary aircraft barrel assemblies. 2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules. 3. Manages the coordination and development of parts, planning, tooling & purchase orders. 4. Has oversight over the release of engineering documentation. 5. Responsible for interface definition & configuration control of a specific aircraft barrel section. 6. Reviews engineering and manufacturing release criteria. 7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements. 2. Experience in communicating with employees/teams in productive and efficient manner. 3. Ability to work independently and cross-functionally. 4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams. 5. Ensures designs meet customer criteria, quality standards and FAA requirements 6. Knowledge of industry design and documentation standards. 7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must. 8. Experience with mechanical assemblies and manufacturing technique design. 9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. 10. Performs other duties as assigned 11. CATIA Knowledgeware and SmarTeam experience desirable.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6813
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/06/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr

Description:
Airworthiness Inspector Sr
Long Beach, CA
Long Term Contract
$30.00-39.10/Hr

Unique Skills:
Proven ability to work as part of a team

Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:

Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6875
Job Location: Long Beach, CA
Rate: 30.00-39.10
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airworthiness Inspector Sr.

Description:
Airworthiness Inspector Sr.


Location: Savannah, GA
Rate: $35.75/HR
Long Term contract


Unique Skills:
Must be able to support AAP on all shifts 24 /7


Education and Experience Requirements:
High School graduate/GED. Airframe and Powerplant License required. Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.


Position Purpose:
The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed.

Principal Duties and Responsibilities:
Essential Functions: 1. Responsible for all quality control inspections on aircraft/components in the Repair Station. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service. 7. Ensures aircraft/components are airworthy prior to any flight activities. 8. Mentors technicians on effective documentation.

Additional Functions: 1. Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, Airworthiness Directive status, and Service Bulletin status. 2. Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual. 3. Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example. 4. Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures. 5. Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft. 6. May perform ODA functions as assigned. 7. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 8. Performs other duties as assigned.

Other Requirements: 1. Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents. 2. Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required. 3. Familiar with FAA certification approval processes. 4. Strong written and verbal communication skills. Must be able to effectively prioritize tasks. 5. Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.
 
Job Number: 6894
Job Location: Savannah, GA
Rate: $35.75/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/16/2017
Firm Name: INCONEN CORPORATION
Attention: Cherise Harris
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Technician

Description:
Responsibilities:

• Candidate will be responsible to work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and DCC CMM's.
• Candidate will also be responsible to perform precision inspection verifications on mechanical parts, components, assemblies and materials. May include but is not limited to first article parts, in-process and final inspection on assemblies, and materials for workmanship and conformance to specifications / drawings.
• Candidate will utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and CMM’s.
• Approves or rejects items and documents inspection results as required. Communicates with internal customers as required to resolve inspection, engineering and manufacturing challenges.

Basic Qualifications:

• High School Diploma or GED.
• Minimum 5 years of in-process and final inspection experience.
• Must have PC-DMIS experience using direct CAD models.
• Minimum 3 years recent CMM inspection.
Preferred Skills and Experience:
• ISO 9001 / AS9100 experience a plus.
• Romer Arm experience is preferred but it is not required with sufficient PC-DMIS skills.
• Understanding of process control experience is a plus.
• AA Degree is preferred.
• Must be open to working any of the following shifts:1st Shift (A) – Su, M, T, W, Th – 5:00am – 3:30pm; 1st Shift (B) – T, W, Th, F, Sa – 5:00a - 3:30pm; 1st Shift (W) – F, Sa, Su, M – 3:00am – 3:30pm; 2nd Shift (A) – Su, M, T, W, Th – 3:30pm – 2:00am; 2nd Shift (B) – T, W, Th, F, Sa 3:30pm – 2:00am; 2nd Shift (W) – F, Sa, Su, M – 3:00pm – 3:30am with overtime as necessary.

Additional Requirements:
• Requires the ability to read and interpret engineering drawings and specification using ASME Y14.5.
• Experience with GD&T and skillful use of metrology tools and gages required.
• Experience with Microsoft applications including Word and Excel.
• Be able to lift a minimum of 25lbs on occasions.
• Stand, walk, push, pulls, reach overhead, and bend to the floor.
ITAR Requirements:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
 
Job Location: Hawthrone, CA
Start Date: ASAP
Input Date: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Interiors Design Engineer

Description:
Unique Skills:
Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Mount Configuration Design engineer will employ design standards consistent with company standards and accepted design methods are executed under the direction of the Mechanical Engineering Group Head to meet the manufacturing schedule. -Other preferred skills: Microsoft Project, Excel and Power Point.
 
Job Number: 24-134
Job Location: Savannah, GA
Rate: $55-$63/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/07/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Joe
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Seeking direct and contract Cabin Safety engineers to join the team in Seattle with at least five years� experience with cabin safety engineering, to include:

� Flammability
� Emergency lighting
� Escape slides
� Seats crash testing
� Exit row indications and placards
� Emergency exit doors

Essential functions:
� System requirements verification and validation.
� Flight test and ground test specifications.
� Support flight test and ground test activities.
� Analyze test data and evaluate system operation.
� Prepare test reports.

Desired Qualifications:
� Cabin Safety Engineer shall have experience with flammability, emergency lighting, slides, crash testing, etc.
� Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
� Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
� A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
� Ability to represent the client professionally and positively during client interactions and meetings.
� Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Number: CS/Sea
Job Location: seattle, wa
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: asap
Input Date: 03/29/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Dawn Bergau
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineer

Description:
Completions Mechanical Engineer Tech Spec II

Location: Savannah, GA
Rate: $62.00/hr - $67.00/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-CATIA V5 and SmarTeam experience required.
-Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc).

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6795
Job Location: Savannah, GA
Rate: 62.00-67.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/06/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineering Consultant

Description:
Unique Skills:

-CATIA V5 and SmarTeam experience required -Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
 
Job Number: CompMech
Job Location: Savannah, GA
Rate: 58-63
Per Diem: Yes
Overtime: yes
Duration: 1 year minimum
Start Date: asap
Input Date: 01/04/2017
Firm Name: SOURCE GROUP PROFESSIONALS INC
Attention: Recruiter
Address: 4729 E SUNRISE DR STE 244
City, State: TUCSON, AZ 85718
800 Phone: 888/352-8797
Fax Phone: 866/835-2145
Website: www.sourcegrouppros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical Engineering Consultant

Description:
Completions Mechanical Engineering Consultant

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-CATIA V5 and SmarTeam experience required
-Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
 
Job Number: 6898
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/15/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Mechanical/Liaison Engineering Consultant

Description:
Completions Mechanical/Liaison Engineering Consultant

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-CATIA V5 and SmarTeam experience required
-Experience designing aircraft interior components, furnishings and interior installations required (eg: galleys, lavs, liners, etc)
-Experience in Aircraft Production cabin installation liaison duties
-Able to track engineering change and also provide sound technical advice to engineering design teams during aircraft cabin installations.
 
Job Number: 6899
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/05/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Calibration Technicians

Description:
JSG is looking for a Component Calibration Lab Technician - First Shift and Second Shift for a 12+ month contract opportunity in Stratford, CT!

Duties:
Mechanical Component Calibration / Ground Test Instrumentation lab technician capable of working from Engineering drawings with limited guidance to fabricate, install, diagnose and repair hydraulic, mechanical and data systems associated with component calibration fixtures and facilities required to support ongoing Engineering Ground and Flight Test Development programs.
The calibration of Flight aircraft and Ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.
Must be able to work at heights.
 
Job Number: 353387
Job Location: Stratford, Ct.
Rate: open
Per Diem: Yes-If qualified
Overtime: Possible
Duration: 12 month +
Start Date: ASAP
Input Date: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Engineer II

Description:
Unique Skills:

SAP, Solumina, Electrical systems knowledge


Education and Experience Requirements:
Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.


Position Purpose:

Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

Principal Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 88302
Job Location: Pooler, GA
Overtime: Possible
Start Date: ASAP
Input Date: 01/10/2017
Firm Name: INTERGEN GROUP
Attention: Cort Hayes
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Engineer Programmer

Description:
Position Description:

Reviews, analyzes, and modifies programming systems including encoding, testing, debugging and installing to support an organization's client/server software applications.
Accountable for field engineering support to the Resort and supporting departments, including control systems engineering services for ride, show, and other ride related control systems. These services include: planning, organizing, and leading teams in troubleshooting; problem resolution; system operational enhancement; system reliability improvement; and documentation.
Must have sufficient technical knowledge and awareness of details to be able to recognize when technical problems are developing in various disciplines, and to initiate appropriate corrective actions. Respond to mechanical and control emergencies resulting from Attraction downtimes at the Resort.

Requirements:
• Controls Systems experience with 1-5+ years in the amusement park industry or industrial/manufacturing environment
• Ride element performance analysis: dynamic, kinematic, hydraulic and pneumatic analysis and calculations
• Knowledge gained by experience in the following:
Electronic control systems and signal processing, including familiarity with relays and programmable logic controllers
Electrical motor controls including variable frequency drives and soft starts
Variety of industrial automation PLC manufacturers
National and California Electrical Code
Nationally recognized Testing Laboratory certifications such as TUV, UL, etc.
AutoCAD o Object oriented programming
C and C++ programming
Ladder logic
Wiring and interconnect diagrams
ANSI, ASTM, and IEEE standards
• Excellent oral and written communication

Bachelor of Science in Electrical Engineering, Mechatronics, Electronics Engineering, or equivalent from an ABET accredited University.
 
Job Number: JO358752
Job Location: Anaheim, CA
Duration: 12 months+
Start Date: asap
Input Date: 01/12/2017
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity

Description:
Looking for an applicant with a Bachelor's degree and at least 5 years in the following: Check 3D engineering data for conformance to Gulfstream requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas: • Accuracy and completeness of engineering product definition data, including CAD and PDM data. • Proper application and compliance with all Engineering and customer drawing requirements. • Use and understanding of GD & T a must. • Dimensioning and tolerancing including familiarity with ASME Y14.5. • Application of best drafting and design practices and procedures. • Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts. • Advise Design personnel regarding GAC drawing and design practices and procedures. • Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams. • Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments. • Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements. • Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities • Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems. • Ensures designs meet customer criteria, quality standards and FAA requirements. • Adheres to budget and project schedules. • Provides design guidance and feedback to other engineering personnel. • Other duties as assigned. • Knowledge of industry design and documentation standards. • Experience with mechanical assemblies and manufacturing technique design. • Ability to work independently and cross-functionally. • Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
PLease check out all of our openings at
www.hi-tecsolutions.com/jobs
 
Job Number: 89201
Job Location: Savannah, GA
Rate: 50-55
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 01/25/2017
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: 2501 E PIEDMONT RD STE 103
City, State: MARIETTA, GA 30062-7753
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Integrity Engineer (TSI)

Description:
Data Integrity Engineer (TSI)

Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Long Term contract


Unique Skills:
- Check 3D engineering data for conformance to company requirements as directed.
- Check parts for fit, form and function to the extent that information is available.
- Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.
- Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding company drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of company parts list & PdocM, a plus.

Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6945
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/28/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer / NX 10 CA

Description:
Job Title: Design Engineer
Job Number: 157682/4391
Location: Torrance, CA
Compensation: 50/hr
Assignment Length: 6 month contract

Description:

• Contribute to the development of new product requirements through consulting with customers and sales personnel.
• Validate conceptual problem solutions by performing trade studies and analyses.
• Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
• Operate as a key element in a team of creative, independent individuals.
• Represent Moog in a manner consistent with its technical reputation.
• Create reliable designs through a comprehensive experimental development test program.
• Document designs, analyses, and test results with accurate and concise reports
Required skills: • 5-8 years of design and development engineering experience
• Self-starter with strong analytical skills and a desire for constant improvement
• Excellent customer relations skills
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Team orientation and desire to participate in and contribute to a high functioning team
Scope: Moog Aircraft Group in Torrance is looking for a Design Engineer to be an integral part of our engineering team delivering highly complex electromechanical, mechanical, and hydro mechanical components and systems to our Commercial sector customers. Typically, the design engineer devises new approaches for the engineering problems encountered.
Education: • Bachelor’s degree in Mechanical or Aerospace Engineering, advanced degree preferred.
 
Job Number: MB-4391
Job Location: Torrance, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 03/10/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer 3

Description:
This position requires a strong background in Aerospace Engineering/Design with an emphasis on pneumatic, mechanical and electro-mechanical components/assemblies. The ideal candidate will have experience in the design, analysis and prototyping of pneumatic fluid control devices such as solenoid and motor operated pneumatic valves. The candidate should have a broad background including work with mechanical devices and subsystems, preferably for use in military or commercial aviation. Knowledge of airborne weapon systems and /or weapon carriage equipment is strongly desirable.

Specialist knowledge regarding the sizing of flow elements, design and operation of high pressure pneumatics, hydraulics, motor actuators and solenoids will be a strong differentiator for candidate selection. Must be flexible and able to work effectively in a fast paced environment as a member of a cross functional team and as an individual contributor.


SKILLS / REQUIREMENTS
Minimum BSME, BSAE and 7 to 10 years experience in relevant design/development environment, preferably for military or commercial aviation.

Knowledge of manufacture of mechanical components and assemblies with emphasis in complex electromechanical systems, or large structures

Knowledge of manufacturing techniques, their capabilities, strengths and weaknesses. Prior assembly or shop experience is a plus

Must have knowledge of aerospace materials properties and selection as well as processing including Heat Treat and Coatings for aerospace requirements

Must be able to perform basic measurements and simple inspection processes

Must be able to demonstrate knowledge and experience in creation of design concepts using hand sketches, and CAD tools.

CAD experience in CATIA or Pro-E a plus

Must be able to perform preliminary flow passage sizing, pressure vessel and structure stress checks and rough sizing calculations by hand. Use of FEA tools is a plus.

Must have experience with MIL-STD documents, reading and interpretation of ASME Y14.5

Must be able to write engineering reports that include analysis and results

Must have excellent verbal and written communication skills

Must be fluent in written and spoken English

Evidence of accomplishment in self-documentation of work product through technical reports, test reports etc. will be considered as a plus

Knowledge of Microsoft Office products is essential

Proof of Education is required
US Citizenship Required
 
Job Location: Inglewood, CA
Rate: Open
Per Diem: No
Overtime: No
Duration: Permanent
Start Date: Now
Input Date: 03/01/2017
Firm Name: JOHNSON SERVICE GROUP
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
OCCUPATIONAL SUMMARY
Design coordination of seats and seat components. Coordinates changes with other internal company departments, vendors, and customers.

DUTIES AND RESPONSIBILITIES
Reviews specification as related to assigned job.
Prepares check list.
Prepares lay-outs.
Prepares structural sub-assemblies and drawings.
Prepares sketches for details.
Reviews drawing package to assure conformance to requirements.
Submits completed drawings to project lead for approval and release.
Liaison for assigned task.
Perform other duties as required.

QUALIFICATION REQUIREMENTS
KNOWLEDGE AND SKILLS
Must have excellent drafting skills in CATIA V5 (or higher) and/or Pro/Engineer.
Must be able to provide complicated lay-outs and program design studies.
Must be able to interact successfully with engineering, tooling, and manufacturing departments.
Must be able to function as part of a design team.
Must have a thorough understanding of manufacturing processes.

EDUCATION AND/OR EXPERIENCE
Must have a Bachelors degree in Mechanical Engineering, Aerospace Engineering Aeronautical Engineering, Mechanical Engineering Technology, Design Engineering, Automotive Engineering, Manufacturing Engineering, Manufacturing Engineering Technology, Mechanical and Energy Engineering or a related engineering degree (minimum of 12 years equivalent related engineering experience will be considered in lieu of Bachelors degree) plus an additional 2 years of related design experience required.
OR
Must have a Masters degree in Mechanical Engineering, Aerospace Engineering Aeronautical Engineering, Mechanical Engineering Technology, Design Engineering, Automotive Engineering, Manufacturing Engineering, Manufacturing Engineering Technology, Mechanical and Energy Engineering or a related engineering degree plus 1 year of related design experience required.

COMMUNICATION SKILLS
Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.

REASONING ABILITY
Ability to think strategically and solve problems.

PHYSICAL DEMANDS
This position requires extended periods of sitting while working with computers and viewing computer monitors, and other office equipment. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.
 
Job Number: 16-610-7461
Job Location: South-central
Rate: $48K to $65K
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Design Engineer II for an opening in Canoga Park, CA.

RESPONSIBILITIES:
Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors). Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
Supports combustion devices hardware through the entire product life cycle. Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities. Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques. Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
Assignments typically have specified objectives and require the investigation of a limited number of variables. May make presentations to small audiences.
Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product. May assign work to and direct less senior engineers and support personnel as required.

Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational. May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

REQUIRED EXPERIENCE:
Candidates should have hands on mechanical experience. This position will be setting up lab experiments and managing data.
General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering. Knowledge of statistical methods. Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems. Ability to operate effectively in a team environment.

EDUCATION:
Bachelors degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.

1st Shift, 5/40 Schedule
 
Job Number: 161344
Job Location: Canoga Park, CA
Duration: 8 Months
Start Date: ASAP
Input Date: 01/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Design Engineer II
Canoga Park, CA
3 Month Contract
$28-30.00/Hr

Duties:
** Candidates should have experience with Creo and GD&T **



** Windchill experience strongly preferred **



Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design Development and testing of valves, actuators and associated hardware
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.



Engineers also required to analyze and verify product design and performance for adequacy and reliability.



Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.



Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.



Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in Engineering or equivalent. MS degree is desired.



5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems.
 
Job Number: 6846
Job Location: Canoga Park, CA
Rate: 28.00-30.00
Per Diem: Possible Split
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 01/17/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II / Creo and GD&T Windchill CA URGENT

Description:
Job Title: Design Engineer II
Job Number: 157943/5830011
Location: Canoga Park, CA
Compensation: 30/hr
Assignment Length: contract


Description:


Duties:
** Candidates should have experience with Creo and GD&T **



** Windchill experience strongly preferred **



Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packings for liquid rocket engine systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design Development and testing of valves, actuators and associated hardware Applies theories of heat and energy transfer to create practical solutions to technical problems Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.



Engineers also required to analyze and verify product design and performance for adequacy and reliability.



Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.



Must be able to interface well with other members of project or program team. management, and technical staff to define ind implement engineering solutions to meet group, organization, and company objectives.



Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in Engineering or equivalent. MS degree is desired.



5 years of related experience as technical designer in rocket propulsion hardware and Pro/E/Creo CAD systems.
 
Job Number: MB-5830011
Job Location: Canoga Park, CA
Rate: 30/hr max
Duration: 4 month contract
Input Date: 01/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers with Flight Controls Experience

Description:
Perform design of aircraft flight controls systems.
MUST HAVE flight controls experience from a General Aviation OEM:
Cirrus Aircraft
Textron (Cessna/Hawker)
Piper
AND the following would work too:
Gulfstream
Bombardier/Lear
Embraer

MUST BE US PERSONS
Create 3D/2D definition.
CATIA V5 is a MUST.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of test plans which will be used to verify manufacturing processes meet design intent and requirements.

Looking for self-starters who are problem solvers. Need guys who do not rely on internal processes and hand-holding. Must ask questions and work with peers to figure out problems.

MUST BE US PERSONS

The Structures Company LLC is an AA/EOE.
 
Job Location: Mojave, CA
Rate: up to $65/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Systems Integration Zone

Description:
Airframe Systems Integration Zone

Location: Savannah, GA
Duration: Long Term Contract
Pay Rate: $60/hr - $65/hr
Shift: First

Position Purpose:
The primary objective for the Airframe Systems Integration group is to ensure designs are fully integrated between the multiple design disciplines as well as manufacturing and maintainability. Other important objectives included supporting Design for Manufacturing goals of part standardization and part count reduction and providing requirements and processes for each phase of the design process.

Essential Functions:
1. Manages Installation Design of primary aircraft barrel assemblies.
2. Coordinates integration of airframe and system installations. Holds planning and review meetings as needed. Manages and reviews schedules.
3. Manages the coordination and development of parts, planning, tooling & purchase orders.
4. Has oversight over the release of engineering documentation.
5. Responsible for interface definition & configuration control of a specific aircraft barrel section.
6. Reviews engineering and manufacturing release criteria.
7. Defines when sufficient review cycle criteria have been met. Conducts risk analysis for remaining tasks.

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements.
2. Experience in communicating with employees/teams in productive and efficient manner.
3. Ability to work independently and cross-functionally.
4. Current and up-to-date knowledge of developments in the structures/systems design disciplines 3D / MBD data requirements, as well as all interrelated disciplines of design build teams.
5. Ensures designs meet customer criteria, quality standards and FAA requirements
6. Knowledge of industry design and documentation standards.
7. Use and understanding of Dimensioning and tolerancing including familiarity with ASME Y14.5 a must.
8. Experience with mechanical assemblies and manufacturing technique design.
9. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
10. Performs other duties as assigned
11. CATIA Knowledgeware and SmarTeam experience desirable.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 6814
Job Location: Savannah, GA
Rate: 60-65
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/15/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Validation Engineering IV

Description:
OCCUPATIONAL SUMMARY
The individual is responsible for executing projects in proper direction to obtain a certified seat structure. He/she would stand as technical specialist for design validation.

DUTIES AND RESPONSIBILITIES
A. Recommend strategies for all design validation activities with respect to applicable requirements by utilizing analytical process and testing as necessary to the DV group.
B. Will scrutinize all the analyses done by design validation engineers and propose new ideas to them.
C. Implement analytical approach and help DV staff in establishing decent correlation with test data.
D. Mentor the Design Validation Engineers and mold them per department requirements.
E. Will be responsible for software license follow up and its proper implementation.
F. Responsible for planning cost effective and robust design visions with Lead design validation engineer.
G. Comply with Zodiac Seats procedures (QAP) and certification internal procedures.
H. Responsible for analyzing weight saving structure and building tested material data base used for finite element models
I. Will be responsible for building PSM (Prescribe structure models) models.
J. Will actively work on inflatables and airbag projects.
K. Responsible for developing new ideas to control HIC (head injury criteria).
L. Provides status and schedule updates to department head and other appropriate entities on a regular basis.
M. Responsible for answering design related questions pertaining to failure of composites and seat structure.
N. Will be working simultaneously with test lab manager to obtain useful test data.
O. Advising Leads/Manager/Directors for new processes

QUALIFICATION REQUIREMENTS
KNOWLEDGE AND SKILLS
1. Must have strong background for finite element modeling tools and solvers.
2. Must have strong understanding of dynamic test modes conducted at ZSUS per FAA requirements.
3. Must have vast knowledge of airbags and occupant restraint systems along with seat structure.
4. Familiarity of FMVSS/consumers requirement is preferred but not mandatory.
5. Must have excellent knowledge of ATDs (Anthropomorhic test dummy) hardware and model.
6. Minimum of 6-8 years FEA experience using LS-Dyna, Altair HyperWorks suite.
Experience with solvers like Madymo, ABAQUS, PAMCRASH, NASTRAN is preferred.
7. Must have strong unix/linux or window based system knowledge.
8. Knowledge of composites is required.
9. Must have strong mechanical aptitude.
10. Must be detail oriented and have sound engineering judgment.
11. Must be self-motivated and a self-starter.
12. Good knowledge of Radioss, Primer, ESI-visual is preferred.
13. Must be able to communicate efficiently in writing and verbally.
14. Must be able to operate standard office equipment.
15. Must be able to generate documents such as, plans, data sheets and reports.
16. Must have ability to analyze CAD drawings.
17. Must have dynamic and static testing experience.
18. Basic Pro/E/CATIA skill is preferred.
19. Familiarity with FAA regulations, Boeing/Airbus specifications is preferred.
20. Must be able to communicate well with internal departments, customers, and regulatory agencies.
21. Must be presentable and write technical presentations

EDUCATION AND/OR EXPERIENCE
Must have a M.S. in Mechanical or Aerospace Engineering with 6-8 yr. of FEA related experience.
LS Dyna experience, minimum of 6 years required.
Supervisory experience preferred but not required.


COMMUNICATION SKILLS
Must have the ability to generate written communication and to operate required office equipment. Ability to read and review written communication. Speech and hearing abilities that allow individual to communicate clearly and distinctly in English.

REASONING ABILITY
Ability to solve problems and think strategically

PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is required to sit for long periods of time while working with computers and viewing computer monitors, and other office equipment alternated with periods of standing and walking. This position also requires extensive walking/standing to participate in activities on the shop floor. Time period may vary from day to day. Finger dexterity needed in using misc. office equipment such as telephone, typing, ten key, fax, copy machine etc. Bending, stooping, reaching and lifting up to approximately twenty pounds are required during tasks related to the job.

Listed above are the ESSENTIAL FUNCTIONS of this job classification. Employees in this job classification may be required to perform various other duties including but not limited to training, administration, and housekeeping. In addition, employees in this job classification are responsible for the quality, quantity and timeliness of the product or service they provide. They will carry out those duties, in a safe and cooperative manner, per established policies, practices and procedures. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Management reserves the right to waiver qualification requirements when experience levels are exceptional.
 
Job Number: 16-609-7432
Job Location: South-central
Rate: $70K to $90K
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 03/20/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Doors Design Engineer

Description:
General Summary:
Design Engineer responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
  • Generates Engineering Models and Drawings utilizing CATIA Version 5
  • Performs trade studies to identify optimal engineering solution
  • Collaborates with the Integrated Product Team to resolve cross functional issues
  • Reviews work performed by others and ensure work is to the highest standard
  • Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
  • Have the ability to understand and apply certification requirements
  • Implement design solutions optimized for cost and weight
  • Manages task execution to ensure on-time and on-target completion.
  • Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality
  • Searches for problem root cause and develop corrective action plans and solutions
  • Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones
  • Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience

    Education, Work Experience, Certification and/or Licensure:
    BS in Mechanical Engineering with 10-15 years directly related experience
  • OR MS / MBA with 8-13 years of experience
  • OR 18-23 years directly related experience
  • Some Travel may be required

    Knowledge, Skills and Abilities:
  • Proficient in use of CATIA Version 5
  • Advanced knowledge of drafting rules
  • Advanced knowledge of Geometrical Dimensioning and Tolerancing
  • Proficient in Microsoft Office Products
  • Use of Team Center
  • Familiar with FAR Part 23 or Part 25
  • Functional knowledge of SAP
     
  • Job Number: 28-010
    Job Location: Greensboro, NC
    Rate: $50 - $65/hr.
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 06/14/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Tech Designer

    Description:
    Job Description:

    Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

    Education / Experience:

    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
     
    Job Number: 24331-1
    Job Location: North Charleston, SC
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Michelle Fox
    Address: WESTRIDGE OFFICE PARK
    2646 HIGHWAY 109 STE 207

    City, State: WILDWOOD, MO 63040
    Phone: 636/438-0312
    800 Phone: 866/277-3343
    Fax Phone: 636/220-8284
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Wire Design & Installation (PA)

    Description:
    Leads, develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Manages, interprets and develops design requirements. Uses design tools to document and maintain configuration design control. Manages, creates, develops and maintains complex systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Validates complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under minimal direction.

    Additionally...
    _Aerospace experience is desired, but not required.
    _Candidates with Automotive wire harness routing / MBD experience will be considered.
    _Prior experience with Wire Harness Installation design in the aerospace field is preferred.
    _Proven Advanced CATIA V5. Resume must clearly state the experience and prove level of proficiency for CATIA V5.
    _Proven Advanced Teamcenter(IPDM).
    _Proven Advanced MBD (Model Base Definition).
    _Mandatory Candidates must have recent experience (within the last year) in designing, developing, maintaining and releasing wire harness drawings and 3D Model based definition data packages using CATIA V5, the electrical workbench, and Teamcenter/ IPDM.
    _Must have am AA degree in Electrical Engineering Technology or Engineering.

    AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience. Additionally, AA Degree must be in either Engineering or Electrical Engineering Technology.
     
    Job Number: EEDesignPA
    Job Location: Ridley Park, PA
    Rate: up to $45/hour
    Per Diem: YES
    Overtime: Possible
    Duration: 3+ months
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing Engineer - Engineer Consultant

    Description:
    UNIQUE SKILLS
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: -3D wire routing -EWIS -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -Cabin interior monuments -Seats
     
    Job Number: 16-654-88884
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 03/20/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical/Mechanical 3-D Wire Routing engineer

    Description:
    Electrical/Mechanical 3D Wire Routing Engineer – Engineer Consultant

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -3D wire routing
    -EWIS
    -Cabin Management System
    -Cabin Entertainment System
    -Cabin Lighting
    -Cabin Switch Controls
    -Telephone System -Satellite communications
    -Water System
    -Waste System
    -Cabin interior monuments
    -Seats

    Education:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6884
    Job Location: Savannah, GA
    Rate: $58-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 04/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronic Fabricators / EMI Harness Technicians

    Description:
    1. Assemble required wiring harnesses, test boxes, and laboratory test equipment.

    Skills/Experience
    - Experience with electrical and electronic fabrication.
    - Must have experience with fabrication of Military style connectors and aircraft wiring harnesses and systems.
    - Experience with all the tooling and dies required to terminate mil-spec wires
    - Experience terminating EMI harness assemblies
    - Experience fabricating wire harnesses
    - Experience fabricating test sets
    - Experience using hand tools, mechanical and electrical
    - Experience with schematics and electrical diagrams
    - Evidence of Lockout Tag Out Authorized training

    Other Requirements:
    - Requires Safety shoes
    - Must be able to support extended shift operations, scheduled weekend work, possible shift changes.
     
    Job Number: 353185
    Job Location: Stratford, CT.
    Per Diem: Split Possible
    Overtime: Yes
    Duration: 1 year +
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II

    Description:
    Required:CATIA V5 experience required with specific knowledge of GD&T and the application of the FTA tool. Aerospace experience preferred. SmarTeam experience preferred

    Essential Functions and Key Responsibilities:
    1) Develops solutions to a variety of moderate complexity or unusual engineering or technical problems or assignments requiring judgment and ingenuity to work within current engineering protocols to design, develop and analyze aircraft structures, power plant component parts, mechanical and electrical systems and subsystems for commercial, military, executive, general aviation, or special purpose applications on operational aircraft.
    2) Analyzes and interprets engineering proposals to develop design for products.
    3) Reviews project documentation and proposed product specifications to determine design approaches.
    4) Confers with Project Management to clarify or resolve problems.
    5) Designs and develops structural, power plant and other operational and structural components that are used in operating aircraft. This includes producing or assisting in the production of computer aided drawings and engineering reports. 6) Designs and develops analytical programs concerned with ground or flight testing, or development of acoustic, thermodynamic, or propulsion systems.
    7) Tests models, prototypes, subassemblies, or production items to study and evaluate operational characteristics and effects of stress imposed during actual or simulated operational conditions.
    JOB QUALIFICATIONS: ENGINEER II Formal Education, Training, Professional Certification and Work Experience: Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and three (3) to six (6) years related experience and/or training; or equivalent combination of education and experience.
     
    Job Number: 13001BR
    Job Location: Tulsa, OK
    Rate: 34.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: APA SERVICES
    Attention: Lisa A
    Address: 4150 INTERNATIONAL PLZ STE 510
    City, State: FORT WORTH, TX 76109
    800 Phone: 888/272-7868
    Fax Phone: 800/285-8805
    Website: www.apaservices.net

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II

    Description:
    Engineer II

    Location: Canoga Park, CA
    Rate: $50.00 - $55.00/HR
    6 month contract


    ** This is not a Project Engineer role. Looking for candidates who have hands on mechanical experience. This position will be setting up lab experiments and managing data **
    ** Candidates must be U.S. Citizens **
    ** Permanent residents are not eligible for this role **
    ** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **


    Duties:
    - Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, igniters).
    - Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
    - Supports combustion devices hardware through the entire product life cycle.
    - Analyzes and verifies product design and performance for adequacy and reliability.
    - Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
    - Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    - Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.

    Typical responsibilities include:
    - Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features.
    - Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
    - Assignments typically have specified objectives and require the investigation of a limited number of variables.
    - May make presentations to small audiences.
    - Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
    - May assign work to and direct less senior engineers and support personnel as required.
    - Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
    - Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.
    - May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.

    Skills:
    - General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
    - Knowledge of statistical methods.
    - Ability to read and interpret blueprints, technical drawings and specifications;
    - Ability to communicate clearly and concisely;
    - May require the use of engineering test equipment, CAD, and/or various computer systems.
    - Ability to operate effectively in a team environment.

    Education:
    - Bachelors degree in an appropriate discipline/science and two (2) years directly related experience as an associate engineer or equivalent combination of education and experience.
     
    Job Number: 6922
    Job Location: Canoga Park, CA
    Rate: $50.00 - $55.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 01/31/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer II CA URGENT

    Description:
    Job Title: Engineer II
    Job Number: 158217/6006806
    Location: Canoga Park, CA
    Compensation: 55/hr max
    Assignment Length: 8 month contract

    Description:

    ** This is not a Project Engineer role. Looking for candidates who have hands on mechancial experience. This position will be setting up lab experiements and managing data **

    ** Candidates must be U.S. Citizens **** Permanent residents are not eligible for this role **** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **


    Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors).
    Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
    Supports combustion devices hardware through the entire product life cycle.
    Analyzes and verifies product design and performance for adequacy and reliability.
    Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
    Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
    Under general supervision and following established policies, performs professional engineering assignments requiring full use and application of standard engineering principles, theories, concepts and techniques.
    Typical responsibilities include: Performs work which involves conventional types of studies, investigations, structures, or equipment with relatively few complex features. Independently evaluates, selects and applies engineering techniques, procedures, and criteria using judgment in making adaptations and modifications.
    Assignments typically have specified objectives and require the investigation of a limited number of variables.
    May make presentations to small audiences.
    Selects applicable analytical data from previous products, determines the technical principles involved, mathematically defines the problem and computes the engineering characteristics consistent with the specifications, design needs, and requirements of other portions of the product.
    May assign work to and direct less senior engineers and support personnel as required.
    Work is reviewed for soundness of technical judgment and overall adequacy and accuracy.
    Erroneous decisions or recommendations, or failure to get results may cause delays in project schedules and result in the allocation of more resources. Contacts are primarily intra-organizational.

    May also be involved in interfacing with other organizations. Outside customer contacts would be infrequent and on routine matters.
    Skills:
    General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering. Knowledge of statistical methods.
    Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
    Ability to operate effectively in a team environment.

    Keywords:
    Education:
    Bachelors degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.
     
    Job Number: MB-6006806
    Job Location: Canoga Park, CA
    Rate: 55/hr max
    Duration: 9 month contract
    Input Date: 01/27/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineer III

    Description:
    JSG is looking for an Engineer III for a 6+ month contract opportunity in Irvine, CA!!!

    Job Description:
    Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.).

    The ideal candidate will have strong, practical DO-178B development background in safety-critical real-time embedded software.

    Will have a principled knowledge of the DO-178B objectives but will be able to apply practical experience to efficiently meet them.

    Technically proficient with low-level software (e.g. device drivers, board support packages, built-in test), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware but will not be required to debug the electronics hardware.

    5-7 years of experience in commercial (i.e. non-military) DO-178B programs.

    Highly practical & resourceful, and have had a demonstrated experience developing high-performance embedded software for Industrial applications.

    Strong familiarity with Linux, and also with real-time operating systems (e.g. QNX Neutrino).

    Technically proficient with low-level software (e.g. device drives, board support packages), and will be fully fluent in C and assembly.

    Solid understanding of the interaction/interface between software and hardware, and will be able to read schematics.

    Education:
    Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

    Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience.

    Knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies.

    Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

    Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes.
     
    Job Location: Irvine, CA
    Rate: Open
    Per Diem: Possible
    Duration: 6+ months
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer II

    Description:
    Engineering Designer II

    Location: Canoga Park, CA
    Rate: $30.00 - $32.00/HR
    3+ month contract

    ** Candidates must have experience with Creo and Geometric Dimensioning & Tolerancing (GD&T) **
    ** Candidates must be U.S. Citizens **
    ** Permanent residents are not eligible for this role **
    ** Dual citizens are not eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are not acceptable **

    Duties:
    Design and Development Engineer - Must be able to specify valve type, valve trim configuration, material and seal packing’s for liquid rocket engine systems.

    - Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
    - Applies research to the planning design Development and testing of valves, actuators and associated hardware
    - Applies theories of heat and energy transfer to create practical solutions to technical problems
    - Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
    - Majority of work will be to develop and maintain valve layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

    Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

    Skills:
    There are 3 different skill sets that they would accept:
    1. Entry Level Designer
    -Less that 5 years of technical experience.
    -Experience with two or more of the following:
    a. Creo
    b Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
    c. Windchill
    d. Rocket
    e. Valve
    f. High Pressure
    g. Cabling
    h. Harness

    OR

    2. Engineering Designer II (Valve)
    -Creo
    -Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
    -Experience with two or more of the following:
    a. Windchill
    b. Rocket
    c. Combustion
    d. Valve
    e. High Pressure

    OR

    3. Engineering Designer II (Harness)
    -Creo
    -Geometric Dimensioning and Tolerancing (also known as GD&T or ASME 14.5)
    -Experience with two or more of the following:
    a. Windchill
    b. Harness
    c. Cable
    d. Line Routing
    e. Sensor

    Education:
    - BS degree in Engineering or equivalent. MS degree is desired.
     
    Job Number: 6907
    Job Location: Canoga Park, CA
    Rate: $30.00 - $32.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 3+ mos
    Input Date: 01/25/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Sciences

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations.

    Seeking multiple contract or fulltime Flight Sciences Engineers to join the teams in Seattle and Moses Lake with at least five years� experience in flight sciences, including:
    - Stability & Control
    - Aircraft Performance
    - 6DOF Flight Simulation

    Essential functions:
    � Define and validate flight test specifications
    � Perform data review and analysis for verification of aircraft level requirements
    � Utilize flight simulation models and data
    � Support ground and flight test activities
    � Prepare flight test reports

    Desired Qualifications:
    � Flight Sciences Engineer with experience with FAA Part 25 or Part 23 aircraft certification
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor or advanced degree in Aerospace Engineering.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: Yes
    Duration: lt
    Start Date: asap
    Input Date: 10/06/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Miguel Calderon
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Engineer

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
    This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

    The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

    Job Duties and Responsibilities (Essential Functions):

    � Provide instrumentation services: to include:
    o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    � Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
    � Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


    Knowledge/Skills/Abilities:
    � Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
    o Electrical and avionics design,
    o Data Systems Design Principles
    o Telemetry
    o Air data booms (straight nose and swivel-head)
    o Static trailing cones
    o Sensitive aircraft instruments
    o Cockpit displays
    o End-user interface
    o Portable test equipment such as hand-held stick force gauges
    o High-end GPS receivers and antennas for precise aircraft positioning
    o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
    o Pressure transducers
    o Flowmeters
    o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
    o Strain gauges, load cells, force transducers, torque sensors
    o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
    o Video recording equipment
    o Signal conditioners
    o Data acquisition systems and data loggers
    � Intermediate knowledge of flight test operations and flight certification.

    Level Requirements (Minimum):
    Education
    � Formal Instrumentation Training (Military or Civilian) � Preferred
    � BS in Engineering or equivalent experience

    Experience
    � 5+ years relevant technical experience
    � Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
     
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/SEA
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 10/27/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Flight Test Instrumentation Engineer

    Description:
    Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

    The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations
    This Flight Test Instrumentation Engineers will work to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

    Currently looking for experienced Instrumentation Engineers with aerospace or automotive backgrounds to fill openings with an aerospace flight test, engineering and certification organization located in the Seattle, WA area. The ideal candidate will have formal instrumentation training and 2 - 15 years of Instrumentation Engineering experience.

    Responsibilities:
    ● Produce instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
    ● Ensure that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
    ● Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
    ● Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs.
    ● Work closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.

    Requirements:
    ● Formal Instrumentation Training (Military or Civilian) � Preferred
    ● Bachelor�s degree in Engineering or equivalent experience
    ● 2 - 15+ years Instrumentation Engineering
    ● 5+ years relevant technical experience
    ● Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: INST/ORL
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 02/28/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lacey Clark
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Engineer

    Description:
    Ground Test Engineer - 2 Year Contract for our client in Stratford, CT!

    Role & Responsibilities

    Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.
    Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.

    Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.

    Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.
    This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.

    Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
    Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.

    A large portion of the job is oversight of supplier performed component qualification efforts.

    Previous experience in this area is recommended.
    Education:

    Bachelor of Science
     
    Job Number: 352694
    Job Location: Stratford, Ct.
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Ground Test Lab - Mechanical Subsystems

    Description:
    Johnson Service Group has 2 openings for a Ground Test Lab for a 2-year contract for our client in Stratford, CT!!!

    Description:
    Support the Design IPT by providing primary POC oversight of external supplier development of mechanical subsystems (such as floor armor panels or medical stretcher bearing litter, etc. as assigned).
    Participation in weekly supplier teleconference/web meetings to assure technical progress, facilitate communication and technical directions from the IPT lead, provide oversight to assure timely supplier data deliverables to support the subsystem design, development and testing per schedule. Provide status of project activities and deliverable item disposition by IPT member SMEs.
    Good ability to communicate work progress to the IPT CAM for Earned Value progress entry. The candidate must possess the ability and experience to provide technical oversight and review of supplier generated drawing package and 3D CATIAV5 (LCA) models.
    Ability to work in an IPT team environment (with system engineering, structural analysts, weight/balance engineer, materials, manufacturing, test, team members) with good communication skills is a must.
    Tracking status and monitoring progress of external design center drawing packages and similar tasking will be required.
    Education: Bachelor of Science Mechanical Engineering
     
    Job Number: 352682
    Job Location: Stratford, CT
    Per Diem: Possible
    Overtime: Possible
    Duration: 2 Years
    Start Date: ASAP
    Input Date: 02/14/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Description:
    Hydraulic Design/Electro-Mechanical Systems Engineer

    Location: Savannah, GA
    Rate: $60.00 - $63.00/HR
    Long Term contract


    Unique Skills:
    - Basic understanding of Hydraulics as it applies to aircraft is required.
    - Use of CATIA or similar 3D CAD system is required.
    - Experience with Hydraulic Design preferred.
    - Experience with CATIA tubing work bench is preferred.
    - Experience with designing for compliance to FAR 25.1435 is preferred.


    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.


    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 6524
    Job Location: Savannah, GA
    Rate: $60-$63
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Hydraulic Design, Electro-Mechanical Systems Engineer/TSII

    Description:
    UNIQUE SKILLS
    Basic understanding of Hydraulics as it applies to aircraft is required. Use of CATIA or similar 3D CAD system is required. Experience with Hydraulic Design preferred. Experience with CATIA tubing work bench is preferred. Experience with designing for compliance to FAR 25.1435 is preferred.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-629-78841
    Job Location: Southeast
    Rate: $60.00 to $63.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 07/13/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Inspector - Level 1 - Active Secret Clearance

    Description:
    ACTIVE CLEARANCE ONLY!!!!!
    This is a 1st shift position. Work shift is Monday to Friday 8 hours per day. Primary inspection of kits and shipments. Secondary role will be mechanical part inspection. Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts, rejects, or reworks defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures.


    Mandatory Skills:
    Clearance Required. Mechanical inspection experience of complex machined parts, sheet metal parts, paint and stencil marking.


    Desired Skills:
    SOFCLS contract experience Strong and proven communication skills – written and verbal Proficient in Microsoft Office (e.g. Word, Excel, PowerPoint)

    Skill Matrix
    Mechanical inspection 4-5 years
    Kit and shipping inspection 4-5 years
     
    Job Location: Lexington, KY
    Rate: 23-26/hr
    Duration: 6 months
    Input Date: 01/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jung Bahk
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Instrumentation Lab Technician

    Description:
    JSG is looking for an Instrumentation Lab Technician - First Shift Needed in Stratford, CT for a 12+ month contract opportunity!

    Job Duties:
    Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems and Sensors in support of Ground and Flight Test Programs.
    Must be able to accomplish the planning, build up and termination of cable harnesses associated with Instrumentation Systems.
    Must be able to assist in performing system calibrations and check outs with the Test Engineer.

    Must be able to support Sensor Calibrations Experienced Instrumentation Technician in both Rotary Wing Structural Ground and Flight Test.

    Should possess a strong Mechanical and Electrical background familiar with Strain Gages and their circuitry, thermocouples, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation
     
    Job Number: 353388
    Job Location: Stratford, CT.
    Rate: open
    Per Diem: Yes if qualified
    Overtime: Possible
    Duration: 12 Month +
    Start Date: ASAP
    Input Date: 01/30/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Linda Peck
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    Integration Specialist Technician

    Description:
    PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
    In your role, you will:

    • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
    • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
    • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
    • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
    • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
    • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
    • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
    • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
    • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
    • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
    • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
    • Troubleshoot, fault isolate and document nonconformances.
    • Perform related rework and approved repair necessary to accomplish assignments
    • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
    • Perform self examination and inspection as certified and required.
    • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
    • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
    • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
    • Set up and maintain charts, logs, records and reports.
    • Maintain licenses, permits and certifications required to perform assigned work.
    • Perform other duties as assigned within the general job classification
    • Maintain a safe clean and orderly work area.

    As our ideal candidate, you will meet the following requirements:
    • High School Diploma or GED
    • Possess technical skills necessary to perform work using detail work instructions & other released planning documentation and a variety of other supporting technical documentation as required including but not limited to: technical drawings, 2D & 3D models, schematics, circuit/wiring diagrams, process and equipment specifications, photographs, illustrations and sketches.
    • Must be a U.S. Citizen.





     
     
    Job Number: 1610054052
    Job Location: Huntsville, AL
    Per Diem: No
    Duration: 6 months
    Input Date: 05/21/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CGGpAAO&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker

    Description:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations is preferred.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Essential Functions:
    1. Contributes to planning, developing and coordinating of important engineering projects
    2. Provides specialized technical assistance to team members
    3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
    4. Determines and develops own approach to solutions within schedule and cost objectives
    5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
    6. Acts as liaison with representatives outside of the assigned group/area
    7. Actively works to improve daily processes and ensures all work meets customer requirements
    8. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
     
    Job Number: 24-145
    Job Location: Savannah, GA
    Rate: $55 to $57
    Per Diem: YES
    Overtime: YES
    Duration: 1 year+
    Start Date: ASAP
    Input Date: 01/30/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Interior Design Checker (Catia V5)

    Description:
    Ideal Candidates will have 2-D Drawing and 3-D Model Checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System
     
    Job Number: 24-173
    Job Location: Savannah, GA
    Rate: $58 to $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 05/11/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Number: Land/Sea
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: Yes
    Duration: LT
    Start Date: asap
    Input Date: 03/29/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    Landing Gear System requirements verification and validation (ARP4754).
    Prepare and review test specifications, procedures and test reports.
    Support flight test and ground test activities.
    Analyze test data and evaluate system operation.
    Provide engineering input to technical reviews
    Identify and communicate technical risks for the landing gear system
    Support overall certification effort for the landing gear system

    Desired Qualifications:

    Landing Gear/Brakes anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    Aircraft flight test certification program experience.
    Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    Knowledge of materials, mechanical systems, and failure mechanisms
    Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    Ability to represent the client professionally and positively during client interactions and meetings.
    Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: LA
    Job Location: Seattle, WA
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 01/08/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Lynn Launer
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Landing Gear/Brake Systems Engineers

    Description:
    Seeking landing gear systems engineers. Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s.
    We are seeking Landing Gear Systems Engineers to work with our client on a new commercial aircraft flight test certification program.
    Essential functions:
    � Landing Gear System requirements verification and validation (ARP4754).
    � Prepare and review test specifications, procedures and test reports.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Provide engineering input to technical reviews
    � Identify and communicate technical risks for the landing gear system
    � Support overall certification effort for the landing gear system

    Desired Qualifications:

    � Landing Gear/Brakes � anti-skid, brake tuning, brake performance, steering, mechanical and electrical aspects of braking, landing gear system (mechanichal and electric)
    � Aircraft flight test certification program experience.
    � Experience with Hydo-Mechanical systems (valves, actuators, uplocks etc.)
    � Knowledge of materials, mechanical systems, and failure mechanisms
    � Knowledge of Part 25 Airworthiness Regulations and Means of Compliance
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
    � Ability to represent the client professionally and positively during client interactions and meetings.
    � Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.

    Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
     
    Job Number: Seattle
    Job Location: Seattle, WA
    Rate: open
    Per Diem: yes
    Overtime: no
    Start Date: asap
    Input Date: 03/15/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Liaison Engineer/MRB Engineers

    Description:
    • Bachelors Degree in Mechanical or Aeronautical Engineering from an ABET accredited program is required
    • 4-6 years of Material Review Board experience desired
    • Must have Aerospace/Military MRB (not commercial)
     
    Job Number: GKN-MRB
    Job Location: St. Louis, MO
    Rate: 70.00-78.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 months+
    Start Date: ASAP
    Input Date: 02/21/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    MRB/Liaison Engineers - Mechanical Systems

    Description:
    *Bachelors of Science degree in Mechanical Engineering
    *6+ years experience of MRB type design of Mechanical Systems including any combination of Landing Gears, Hydraulics, Flight Controls, Doors and Air Systems.
    Knowledge, Skills and Abilities:
    1. Working knowledge Mechanical Systems concepts and Standard Repair Methods (SRM).
    2. Working knowledge of CATIA V5, AutoCad and XAO preferred.
    3. Working knowledge of SAP preferred.
    4. Proficiency in Microsoft Office Suites (Word, Excel, PowerPoint) and Lotus Notes.
     
    Job Number: MRB-Hond
    Job Location: Greensboro, NC
    Rate: $55.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 01/30/2017
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Maintenance Controllers - Addison, TX

    Description:
    STS AeroStaff Services is currently hiring Maintenance Controllers for open positions in Addison, Texas.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Perform accounting support duties including processing of vouchers, reconciling accounting transactions, and maintaining files. Applies accepted procedures to the preparation and maintenance of financial and business transaction data, and prepares reports to ensure accurate accounting records.

    Job Duties:

    • The Maintenance Control team provides surveillance, control, and direction for all aircraft maintenance 24 hrs a day, 7 days a week as well as effects aircraft repair.
    • Monitor the daily operation relative to plan, coordinating related maintenance activities and providing assistance in preventing or minimizing schedule interruptions due to maintenance requirements.
    • Coordinate with Flight Following, Flight Crew, Mechanics, Planning and Stores, the requirements to maintain flight schedule in accordance with procedures in the GMM
    • Develop total nightly workload packages and balance workload with regard to required and available resources.
    • Initiate MEL tracking numbers track MEL to keep within limits and log information.
    • Keep maintenance stations informed of MEL item coming through their respective stations.
    • Perform scheduled maintenance to keep aircraft in peak operating condition.
    • Initiate repairs/replacement to acceptable or approved technical data and instructions.
    • Tests, inspects and checks all repairs/installations to ensure proper operation. Conducts repairs in a time-efficient manner.
    • Provide technical assistance to contract agency maintenance personnel to assist with the maintenance operation.
    • Plan and schedule lower level maintenance checks and non-routine maintenance work.
    • Initiate, prepare and inform QC of MEL escalation.
    • Prepare reports concerning pertinent aspects of aircraft maintenance operation and for identification of issues requiring special attention.

    Qualifications:

    • Certificated A&P mechanic.
    • 3+ years’ experience in heavy line maintenance of transport category aircraft, preferablyDC-9/MD-80/737 series.
    • Familiarity with FAA 121/145 regulations.

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 35101
    Job Location: Addison, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer

    Description:
    Manufacturing Engineer

    Manufacturing Engineer must have experience with aircraft major structural assemblies/installations. Experience with Soloumina, Smarteam, Catia V5 preferred.
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Level 3

    Description:
    Manufacturing Engineer - Level 3

    Location: Clearwater/Pinellas Park/Oldsmar, FL
    Duration: 1 Year Contract
    Pay Rate: $35/hr - $45/hr (DOE)
    Shift: 2nd, 9/80 ; Overtime: Yes
    *Must be a U.S. citizen* *No clearance needed*

    Job Description:
    -Provide manufacturing engineering support to the build of circuit card assemblies as a contributing member of an integrated product team (IPT).
    -Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are met; Investigate, communicate, and solve design, producibility, and process related assembly issues as required.
    -Define optimal material and product flow within the production work cell, taking into consideration the unique requirements of each customer.
    -Generate and maintain detailed assembly work instructions including narrative, diagrams, photographs, attachments, and linked documents.
    -Support the design change management activities of the IPT.
    - Analyze process defect data and trends and help define and implement corrective actions.
    -Perform and communicate non-recurring engineering activities during production start-up, which includes tooling and fixture design, development of machine automation programs, and configuration of the manufacturing bill of materials for manufacturability.
    -Interface with technical counterparts in other organizations both within and outside Clearwater Operations.

    Mandatory Skills:
    • IPC-A-610 training or J-STD-001 (MANDATORY)
    • Minimum 5 years manufacturing engineering experience in a technical role supporting the design and manufacturing of circuit card assemblies within an Integrated Product Team type of work environment.
    • Skill with surface mount technology and automated SMT build equipment.
    • Strong interpersonal skills and demonstrated ability to work with coworkers and others from diverse backgrounds.
    • Proven ability to effectively communicate through written and oral means, and to multitask by handling multiple assignments in parallel.
    • Willingness to work overtime and during off-days occasionally as required to support production operations.

    Desired Skills:
    • Bachelor’s degree from an accredited University in Engineering.
    • Experience or training with advanced manufacturing technology and automated equipment applications, particularly as it relates to circuit card assembly manufacturing; understanding of lean manufacturing principles and the use of statistical tools to solve problems.
    • Strong technical understanding of circuit card assembly producibility and process flow.
    • Specific experience with SAP and Solumina manufacturing execution system. Mechanical and electrical aptitude, and the ability to quickly learn new software applications.
    • Experienced user of MS S/W applications including MS Word, Project, Excel, Visio, and Power Point.
    • MYDATA SMT pick & place machine equipment
    • Ability to read and interpret Engineering Drawings, and to use viewing and editing tools such as AutoCAD or Corelis.
     
    Job Number: 6946
    Job Location: Clearwater, FL
    Rate: 35.00-45.00
    Per Diem: Possible
    Overtime: Yes
    Duration: 1 year
    Start Date: ASAP
    Input Date: 02/23/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer - Secret Clearance

    Description:
    **Active Secret Clearance**
    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Skill/Experience/Education
    Mandatory:

    Working experience with SAP, engineering documents, specifications and policies. Must have experience working in a manufacturing environment and have a strong understanding of engineering principles including mechanical, industrial, or operations.

    Desired:
    Thorough knowledge of Electrical/wiring manufacturing and associated processes. Tooling, fabrication and assembly manufacturing processes and procedures is a plus. Demonstrated ability to utilize knowledge/experience in the preparation of all document types within the group.

    Skill Matrix
    CATIA 4-5 Years
     
    Job Number: JB - 0329
    Job Location: Palmdale, CA
    Duration: 10-12 months
    Input Date: 01/12/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jung Bahk
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    UNIQUE SKILLS
    Solumina and Catia experience preferred

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    POSITION PURPOSE
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
    2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
    3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
    4. Investigate and assist in preparing justification for equipment and facility requests.
    5. Perform productibility studies from engineering drawings.
    6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
    7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
    8. Incorporate Lean Manufacturing Methodology into existing and future processes.
    9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
    10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
    11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
    12. Support all Safety, Sustainability and Ergonomic Initiatives.
    13. Aid in development and maintenance of Business Continuity Plan.

    ADDITIONAL FUNCTIONS
    1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
    2. Initiate and maintain accurate daily/weekly activity status based on work output, as required.
    3. Perform other duties as assigned.

    OTHER REQUIREMENTS
    1. Proven knowledge of Lean and/or Six Sigma principles.
    2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
    3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
    4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 16-651-88624
    Job Location: Southeast
    Rate: $50.00/per hr.
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer II

    Description:
    Manufacturing Engineer II

    Location: Savannah, GA
    Rate: $50.00/HR
    Long Term contract


    Unique Skills:
    SAP, Solumina, Electrical systems knowledge

    Education and Experience Requirements:
    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:
    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:
    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
     
    Job Number: 6940
    Job Location: Savannah, GA
    Rate: $50.00/HR
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Input Date: 01/31/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0329
    Job Title: Manufacturing Engineer
    Location: Palmdale, CA 93599
    Compensation: 45-65/hr (DOE)
    Assignment Length: 10 + month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    Non exempt
    1st shift

    Description:

    Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

    Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.

    Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions.

    May incorporate inspection and test requirements into the production plan.

    Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

    Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.

    Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

    Skill/Experience/Education
    Mandatory:

    Working experience with SAP, engineering documents, specifications and policies.

    Must have experience working in a manufacturing environment and have a strong understanding of engineering principles including mechanical, industrial, or operations.

    Desired:

    Thorough knowledge of Electrical/wiring manufacturing and associated processes.

    Tooling, fabrication and assembly manufacturing processes and procedures is a plus.

    Demonstrated ability to utilize knowledge/experience in the preparation of all document types within the group.

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    CATIA 4-5 Years No
     
    Job Number: SW-0329
    Job Location: Palmdale, CA
    Rate: 45-65/hr DOE
    Duration: 10 months +
    Input Date: 01/13/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Manufacturing Technician II

    Description:
    Manufacturing Technician II

    Location: Burnsville, MN
    Pay Rate - $25 – 35/hr
    1 year contract
    2nd Shift Monday-Thursday 3:00pm - 1:30am

    Technical Tasks
    Perform technical tasks based on written or verbal instructions. Utilize technical assets.
    -Utilize microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers.
    -Perform advanced troubleshooting, calibration or modification of hardware, fixtures, and software.
    -Participate on and/or lead project teams.
    -Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where moderate ingenuity and judgments are required.
    -Structure modifications to programs w/ Visual Basic or other SW packages/programs preferred.
    -Design simple circuits, fixtures, or mechanical parts.
    -Develop software programs to run NC machines.
    -Provide technical solutions to engineering.
    -Participate on safety initiatives.

    Manufacturing Activities
    Support manufacturing activities through the resolution of production problems, fabrication of complex hardware, equipment and training.
    -Self-manage work flow throughout area with minimal guidance, to achieve team goals.
    -Estimate labor, material, and manufacturing costs for the building and repair of product or process enhancement.
    -Identify and correct minor process, material, design, or equipment problems
    -Actively participate in material review activities including troubleshooting of non-conformances.
    -Perform mid-level (moderately complex) testing or mechanical operations on production/repair hardware including troubleshooting to component level.
    -Provide skill specific training to improve technique and/or understanding of theory of operation.
    -Fabricate complex equipment, hardware or prototypes.

    Documentation
    Provide accurate recording of time changes, test data. Parts usage, etc. This requires data interpretation.
    -Generate reports from test results and communicate results or take immediate corrective action to assure proper disposition of items in question.
    -Write test procedures and manufacturing work instruction for complex or detailed assembly or test operations.
    -Utilize multiple databases to create/use necessary information to provide information for decision making requiring judgment.

    Minimum Education Requirement:
    Associate’s/Technical Degree
     
    Job Number: 6853
    Job Location: Burnsville, MN
    Rate: $25.00 - $35.00/HR
    Per Diem: No
    Overtime: Possible
    Duration: 1 yr
    Start Date: ASAP
    Input Date: 01/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mass Properties Engineer

    Description:
    Understanding of Mass Properties calculations (mass, CG, inertias) and validation - Broad working knowledge of engine structural/mechanical design principles - Understanding of Propulsion System Design Trade-Studies (Performance/Weight/Cost) -
     
    Job Number: MD 37000
    Job Location: East Hartford, CT
    Rate: 65
    Per Diem: Split
    Duration: 18 months
    Start Date: 2-3 weeks
    Input Date: 01/11/2017
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Jim Pyle
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Materials & Process Engineer III - MP&P Engineer (PA)

    Description:
    MP&P Engineer 3 Assignment
    Defines requirements for materials, parts and processes used in the manufacture of products. Produces specifications and other documents to manage the deployment of materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to determine reasons for failures of materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Works under general direction.

    Additionally…
    The main focus of this assignment will be CH47 Chinook factory support. This includes being co-located on the factory floor working with existing processes and equipment associated with the rotorcraft production line, identifying effective manufacturing technology (processes, tools and equipment) to accomplish the build work statement, supporting repair of defective conditions on the aircraft, project management skills, specifically for projects that develop and insert manufacturing technology into current or future build process, and daily interaction with shop personnel. Identify safety and ergonomic improvements. Provide portable and perishable tool recommendations.

    MORE SPECIFIC ASSIGNMENT QUALIFICATIONS:
    _Ability to work with factory mechanics, as well as other organizations such as ME, QA, IE and Engineering are required.
    _Initiative, teaming, planning, project management and communication skills are required.
    _Ability to innovate and strategize, as well as work with details to drive projects to successful completion and implementation.
    _CAD, CATIA, or Solid Works, MS Office, 3D printing are required—Must state the level or experience and training in each of these skills.
    _Assignment may require occasional domestic travel of approximately 5% from Boeing to Suppliers facilities.
    __Assignment requires ability to work overtime and/or different shifts when needed.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: MP&Ppa
    Job Location: Ridley Park, PA
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    Mechanic Technician II

    Description:
    PDS Tech is seeking several mechanics for positions in Kansas City.
    Must have steel toed shoes/boots; all assignments are one year in length
    3rd Shift Position
     
     
     
    Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
      
     Operation of Overhead Cranes is involved in this job
    Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
    Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
    Knowledge of EHS procedures and policies
    • Knowledge of safe use manual equipment and hand tools for assigned product lines.
    • Working knowledge of use of inspection measurement equipment
    • Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
    • Maintain acceptable defect rates
    • Successful completion of training requirements
    • Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
    Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
    • Demonstrate ability to document and record inspection results per in-house procedures
    • Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment



    For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
     

     
    Job Number: 1610059718
    Job Location: KS City, MO
    Duration: 12 months
    Input Date: 05/21/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Eric Khassanov
    Address: 2154 N CENTER ST STE 405D
    City, State: NORTH CHARLESTON, SC 29406
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fr1dAAC&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer

    Description:
    ***Requires Active Secret Clearance***

    Designing modifications for post production C-130 and potentially other fixed-wing aircraft by designing installations, integration, modified parts, assemblies, and systems based on customer specifications. This position will interpret customer requirements then research, develop and document mechanical designs using applicable military specifications, ANSI/ASME or related design and drafting standards
     
    Job Number: 0182
    Job Location: Lexington, KY
    Duration: LT
    Start Date: ASAP
    Input Date: 12/28/2016
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Ram
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer - Level 2

    Description:
    Mechanical Design Engineer - Level 2

    Location: Dallas, TX
    Rate: $50.00 - $60.00/HR
    6 month contract
    1st Shift

    **Must have a current ACTIVE secret clearance**

    Description
    - Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
    - Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
    - Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
    - Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


    Skill/Experience/Education
    Mandatory:
    - Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
    - Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
    - Familiarity with Microsoft Office applications is desired.
     
    Job Number: 6908
    Job Location: Grand Prairie, TX
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 6 mos
    Input Date: 07/11/2017
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Design Engineer / UG/NX CA

    Description:
    Job Title: Mechanical Design Engineer
    Job Number: 157711/4393
    Location: Torrance, CA
    Compensation: 50/hr
    Assignment Length: 6 month contract


    Description:

    Mechanical Design Engineer
    This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydro-mechanical and electro-pneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.
    Essential job functions: • Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
    • Contribute to the development of new product requirements through consulting with customers and sales personnel
    • Validate conceptual problem solutions through trade studies and by applying sound engineering principles
    • Perform engineering calculations related to sizing, performance, tolerance and assembly
    • Be a key contributor to the preparation of technical proposal, cost estimates, and program schedules
    • Guide the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
    • Support programs with some travel (5-10%) and the participation in presentations to customers
    • Represent Moog in a manner consistent with its leading-edge technical reputation
    • Create reliable designs through a comprehensive experimental development test program
    • Document designs, analyses, and test results with accurate and concise reports
    Required skills: • 6+ years of design and development engineering experience
    • Proficient in current versions of NX/UG computer-aided design software
    • Self-starter with strong analytical skills and a desire for constant improvement
    • Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
    • Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis
    • Team-oriented, with the desire to participate in and contribute to a high functioning team
    Scope:
    Education: • Bachelor’s degree in Mechanical or Aerospace Engineering
     
    Job Number: MB-4393
    Job Location: Torrance, CA
    Rate: 50/hr max
    Duration: 6 month contract
    Input Date: 03/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Designer

    Description:
    Mechanical design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. Design Engineer will be required to liaison with the shop on engineering issues.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer

    Description:
    •Provides direction to manufacturing, test, subcontracts staff or technician staff.
    •Supports the coordination all activities between design engineering, QA, procurement, program office, planning, configuration management, vendor and customer.
    •Ensures design and procurement documents are in place to support procurement of component.
    •Documents findings and implements solutions and communicates results to engineering staff.
    •Assists the engineering staff in the analysis, investigation, and solution of routine engineering problems of limited scope related to small project(s) or to phase(s) of larger project(s), normally outlined in terms of task-related activities with detailed instructions.
    •Performs functional testing of equipment and systems in assigned area by utilizing standard engineering and scientific principles.
    •Documents findings and implemented solutions, and communicates results to project engineering staff.
    •Obtains and compiles test data related to modeling and analysis.
    •Requires making brief technical presentations to project staff.
    •Advises management/engineering staff and the program office of the status of work in progress, material availability, and potential design/production problems to ensure that personnel, equipment, materials and services are provided as needed.
    •Works with manufacturing engineering and project management to resolve any design related issue impacting production and to improve product design.
    •Perform root-cause failure analysis, requirements verification, develops failure tree & troubleshooting steps by utilizing standard engineering practices and scientific principles.
    •Represent the organization in technical review boards and customer meetings, as a member of the engineering project subsystem, providing solutions/status to technical issues associated with specific projects.
    •Performs review, approval, presentation and the tracking of engineering change request and assemblies manufactured for the functional test, with emphasis to the respective engineering project subsystem.
    •Assesses any given Incident Report (IR) due to a failure of a Unit Under Test (UUT), develops a Plan of Action and Milestone (POA&M) and supports the Failure Reporting and Corrective Action System (FRACAS).
    •Completes and reviews required documentation to disposition any equipment or system as a Unite Under Test (UUT), provides technical presentation before the customer as required and makes sure the engineers supporting the IPT or engineering project subsystem team are verbatim compliant with the process as required.
    •Provide direction and task activities to engineer staff under the IPT or engineering project subsystem
    •Provides disposition to Supplier Disposition Requests (SDR)/ Non-Conformances (NR) and others, due to manufacturing requests for information, request for design change or non-conformances on the parts being made.
    •Provides technical evaluations to support procurement decisions.
    •Supports and resolves issues and problems at the test site to support test schedule.
    •Develops procurement documents and specifications, Statement of Work (SOW) documents and proposals support for engineered components and assemblies.
    •Performs other duties as assigned or required.


    An EIT (Engineer in Training) certificate or PE (Professional Engineer) license are desirable

    •Familiar with ANSYS, NASGRO, AutoCAD, MatLab and MathCAD is desirable
    •U.S. Navy program acquisition, shipbuilding, ship design, construction and component engineering experience is desirable
    •Electrical/Electronic design experience is desired
    •Production and fabrication experience is a plus
    •Machine design experience is a plus

    Requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
     
    Job Number: 161388
    Job Location: Rancho Bernardo, CA
    Rate: $43.00
    Duration: 6 Month Contract to Hire
    Start Date: ASAP
    Input Date: 01/08/2017
    Firm Name: CHIPTON ROSS
    Attention: Debbie Aubert
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Cabin Development - Engineering Consultant

    Description:
    Mechanical Engineer - Cabin Development - Engineering Consultant
    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Ideal Candidates will have mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
    -Seats
    -Galley
    -Lavs
    -LRU installations
    -Liners -Water System
    -Waste System

    Education and Experience Requirements:
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.
     
    Job Number: 6893
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/16/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer - Checker

    Description:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations is preferred.
    Check out all our openings at www.hi-tecsolutions.com/jobs
     
    Job Number: 89389
    Job Location: Savannah, GA
    Rate: 50-55
    Per Diem: yes
    Overtime: yes
    Duration: LT
    Start Date: asap
    Input Date: 01/23/2017
    Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
    Attention: Anne Cameron
    Address: 2501 E PIEDMONT RD STE 103
    City, State: MARIETTA, GA 30062-7753
    Phone: 770/575-5855
    Fax Phone: 770/575-5856
    Website: www.hi-tecsolutions.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer III

    Description:
    Seeking a Mechanical Engineer III for an opening in Anaheim, CA.

    RESPONSIBILITIES:
    Under general supervision, the Mechanical Engineer III is responsible for the mechanical layout and packaging of power conversion equipment and other Navy based electronic systems. This person generates equipment layouts that satisfy system requirements and account for tradeoffs among thermal, mass properties, structural and manufacturing considerations.

    1.Interprets customer specifications to define requirements for mechanical designs.
    2.Applies the Inventor 3D CAD system to create mechanical layouts and drawings.
    3.Develops detailed fabrication and assembly drawings and performs tolerances analysis.
    4.Designs interconnecting brackets and support structure between components and subsystems.
    5.Supports other mechanical engineers and drafters in conceptual design and preparation of mechanical drawings.
    6.Generates project cost estimates and selects components for various designs.
    7.Performs thermal and structural analyses under the guidance of lead mechanical engineers.
    8.Generates engineering design change orders and performs checking work.
    9.Responsible for project budget/schedule adherence.
    10.Uses established and well defined engineering procedures.
    11.Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
    12.Able to work simultaneously on a variety of projects.
    13.Takes directions from project engineer or department manager.

    REQUIRED EXPERIENCE:
    Bachelor of Science degree in Mechanical Engineering from four-year college or university. Must have at least 5 years of experience in mechanical design and engineering.

    1.Practical experience with 3-D CAD and analysis software tools.
    2.Knowledge of Mil-Specifications and qualification testing.
    3.Good communication skills

    •Electronics packaging experience and familiarity with Military specifications.
    •3D CAD fluency is also a must along with experience with complex systems.
    •Rigid flex/bus plane design
    •System level design

    ADDITIONAL EXPERIENCE:
    •Electronics Packaging – this is a requirement for ME III and up for me. – ME III and up
    •Recent 3d CAD experience (strong preference is Inventor) – ME II and up
    •Vault experience or similar and how recently they’ve used it – ME II and up
    •PLM experience (preferred, but not mandatory) – ME II and up
    •Able to read basic schematics (preferred, but not mandatory) – ME II and up
    •Tolerance Analysis – Preferred for ME II and ME III

    EDUCATION:
    Bachelor of Science degree in Mechanical Engineering from four-year college or university.

    WORK HOURS:
    9/80, Day Shift

    LANGUAGE SKILLS
    Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

    MATHEMATICAL SKILLS
    Ability to work with mathematical concepts such as probability and statistics inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

    REASONING ABILITY
    Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

    PHYSICAL DEMANDS
    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    While performing the duties of this job, the employee is regularly required to walk; sit; use hands and fingers, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

    WORK ENVIRONMENT
    The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    The noise level in the work environment is usually moderate.

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 161355
    Job Location: Anaheim, CA
    Rate: $65 - $75
    Per Diem: No
    Overtime: Possible
    Duration: 6 mths.
    Start Date: ASAP
    Input Date: 01/10/2017
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer/Checker

    Description:
    Mechanical Engineer/Checker

    Location: Savannah, GA
    Pay Rate: $50-$55
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Mechanical Engineering checking and design experience with Model Based Design and drawings, using CATIA V5 and SmarTeam. Additional experience using AutoCAD desired. Experience in engineering aircraft interior components and installations are preferred.
     
    Job Number: 6896
    Job Location: Savannah, GA
    Rate: 50.00-55.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/21/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineering Consultant - Cabin Systems

    Description:
    UNIQUE SKILLS
    Ideal Candidates will have mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System
     
    Job Number: 16-653-88882
    Job Location: Southeast
    Rate: $58.00 to $63.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 01/31/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineering Consultant - Cabin Systems

    Description:
    Mechanical Engineering Consultant - Cabin Systems

    Location: Savannah, GA
    Pay Rate: $58/hr - $63/hr
    Duration: Long Term Contract
    Shift: First

    Unique Skills:
    Ideal Candidates will have mechanical engineering experience with Cabin Interiors and Systems to include but not limited to: -Seats -Galley -Lavs -LRU installations -Liners -Water System -Waste System

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
     
    Job Number: 6886
    Job Location: Savannah, GA
    Rate: 58.00-63.00
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 02/06/2017
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    With sustaining experience
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Southeast
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers BSME -- Pro/E

    Description:
    2000 hours Pro/E
     
    Job Location: CT/IN/FL/OR
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineers I - Anaheim, CA

    Description:
    STS AeroStaff Services is currently hiring Mechanical Engineers I for open positions in Anaheim, California.

    Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

    Job Purpose:

    Under general supervision, the Mechanical Engineer I interprets specifications and other requirements, performs complex analysis, design, plans, estimates tasks, directs the execution of detail design and ensures appropriate documentation on projects. The Mechanical Engineer I evaluates and integrates cost effective design, producibility, and manufacturing practices into mechanical designs. Works directly with all engineering supporting disciplines to establish product concepts and carries ideas through final product design. Coordinates and reviews the work of designers and drafters assigned to the program. Complexity of assignments requires the exercise of considerable initiative, planning, and independent judgment.

    Job Duties:

    • Reviews and interprets specifications and requirements to determine structural, thermal and critical safety characteristics/considerations for mechanical designs.
    • Supports other mechanical engineers and drafters in conceptual designs and the preparation of mechanical drawings.
    • Reviews and approves project documentation, change requests, etc.
    • Performs conceptual designs to meet project objectives, cost, and schedule.
    • Will be responsible for all phases of designs from concept through prototype manufacture and production.
    • Performs feasibility studies to reconcile project requirements with proposed designs.
    • Estimates material and labor costs for proposed designs and proposals.
    • Designs cooling systems for new and updated products.
    • Prepares and is responsible for project budget/schedule adherence.
    • Performs packaging and mechanical design of power conversion equipment.
    • Assists in cost estimates and interfaces with suppliers of components/sub-systems.
    • Conducts thermal, structural and tolerance analysis.
    • Strong knowledge of material and hardware selection including welding, fabrication practices, and machining tolerances to complete a cost-effective design.
    • Interfaces with customers, vendors, and production to develop product requirements and solutions.
    • Supports the manufacturing build and qualification testing requirements as needed.
    • Responsible for maintaining Computer Aided Engineering/Design skills in support of the mechanical engineering and design functions.

    Qualifications:

    • Bachelor's degree (BSME) from four-year college or university; and minimum 8 years related experience and/or training.
    • Knowledge of military and commercial standards pertaining to design, testing, hardware, material, and processes a must.
    • Knowledge of Navy/Military environmental qualification testing.
    • Knowledge of Mil-Specifications and contracting.
    • Skilled in finite element analysis.
    • Good communication skills.
    • Experience using 3-D CAD software tools in design function.
    • Autodesk Inventor, or equivalent modeling software (solid modeler) experience a must.
    • Able to obtain DOD security clearance.
    • Electronics packaging experience and familiarity with Military specifications.
    • 3D CAD fluency is also a must along with experience with complex systems.
    • Rigid flex/bus plane design and/or system level design is a plus.
    • Electronics Packaging experience is a plus.
    • Vault experience or similar and how recently they’ve used it is a plus.
    • LM experience (preferred, but not mandatory).
    • Able to read basic schematics (preferred, but not mandatory).
    • Tolerance Analysis experience is a plus.

    Requirements:

    • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations.
    • Ability to write reports, business correspondence, and procedure manuals.
    • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
    • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.
    • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists.
    • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.
    • While performing the duties of this job, the employee is regularly required to sit; use hands and fingers, handle, or feel; and talk or hear.
    • The employee is occasionally required to stand, walk, and reach with hands and arms.
    • The employee must regularly lift and/or move up to 10 pounds.
    • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

    Benefits:

    STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

    We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

    Thanks for taking the time, and we look forward to hearing from you soon.
     
    Job Number: 37307
    Job Location: Anaheim, CA
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: Temp
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: STS AEROSTAFF SERVICES
    Attention: STS AeroStaff Services
    Address: 2000 NE JENSEN BEACH BLVD
    City, State: JENSEN BEACH, FL 34957
    800 Phone: 877/707-5767
    Fax Phone: 877/707-5767
    Website: www.stsaviationgroup.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical System Design & Analysis Engineer III (NM)

    Description:
    TOP SECRET OR ACTIVE SECRET REQUIRED TO START

    This person will supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction.

    Skills:
    - Experience with structural analysis of large moving structures.
    - Experience with Finite element analysis tools for predicting thermo-mechanical stability, like Ansys/FEMAP.
    - Proficiency with 3D CAD design packages, like Solidworks/Inventor and Autocad.
    - Experience in thermal management and fluid dynamics of cooled cameras and vacuum chambers is highly desired.
    - Experience with opto-mechanical design of optical systems and optical component assemblies is highly desired.
    - Experience with the mechanical tolerance of optical systems (mechanical, optical, thermal) is highly desired.
    - Familiarity with Zemax and basic optical design is highly desired
    - Applicants must have good communication, analytical, and organizational skills and be able to work in a team
    environment.

    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
     
    Job Number: MechIIINM
    Job Location: Kirtland AFB, NM
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 6+ Months
    Start Date: 01/03/2017
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Design & Analysis Engineer

    Description:
    Mechanical Systems Design & Analysis Engineer 4

    Location: Seattle, WA
    Duration: 1 year

    Description:

    Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others. Works under minimal direction.

    Education / Experience:
    Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
     
    Job Number: 17-00481
    Job Location: seattle, WA
    Rate: open
    Per Diem: possible
    Overtime: possible
    Duration: 12 months
    Start Date: ASAP
    Input Date: 01/09/2017
    Firm Name: ICONMA LLC
    Attention: Prakash Thakur
    Address: 1201 PACIFIC AVE STE 600
    City, State: TACOMA, WA 98402
    Phone: 253/213-2012
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer MD

    Description:
    A highly motivated Mechanical Engineer seeking an opportunity to support flight test programs at NAS Patuxent River MD within the area of aircraft Hydraulics (HYD) and Landing Gear and Arrestments Systems (LAGs), Fuel Systems (FUEL), Power Thermal Management System (PTMS) or Electrical Power Systems (EPS). This position will require the candidate to train such that they can provide: test-planning, real-time control room monitoring, flight test data request, post flight data reduction & analysis, and on-aircraft troubleshooting of the subsystems of the JSF aircraft. Once trained in the primary discipline control room support, the candidate is expected to learn to troubleshoot these systems in the event of failures. It is expected that the candidate has the ability to learn continuously to expand aircraft system knowledge while working in a fast pace flight test environment. The candidate should be willing to support some evening and weekends in support of test activities and aircraft troubleshooting. The candidate must be willing to relocate to NAS Patuxent River, MD
     
    Job Number: DW - 0360
    Job Location: Patuxent River, MD
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 mos
    Start Date: ASAP
    Input Date: 01/25/2017
    Firm Name: MIDCOM CORPORATION
    Attention: David Wilkinson
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Mechanical Systems MRB Engineer

    Description:
    Unique Skills:
    Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

    Principal Duties and Responsibilities:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
     
    Job Number: 24-143
    Job Location: Savanah, GA
    Rate: $59 - $62
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 05/17/2018
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems MRB Engineer, Production & Test Aircraft Support (TS II)

    Description:
    UNIQUE SKILLS
    Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

    POSITION PURPOSE
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    ESSENTIAL FUNCTIONS
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    ADDITIONAL FUNCTIONS
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    2. Performs other duties as assigned

    OTHER REQUIREMENTS
    1. Advanced degree in engineering, or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 16-638-82485
    Job Location: Southeast
    Rate: $59.00 to $62.00/per hour
    Per Diem: Split
    Overtime: Possible
    Duration: 6 mths +
    Start Date: ASAP
    Input Date: 01/31/2017
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    Mechanical or Manufacturing Engineers

    Description:
    Project management or overhaul experience
     
    Job Location: West
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer

    Description:
    Metrology Engineer under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.


    Interpret and consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. Assist in developing and documenting standards for the handling and utilization of metrology equipment. Create standardized inspection reports through the utilization of Metrologic software.

    Extensive knowledge of metrology equipment, software and current measurement techniques. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. Knowledge of Lean and/or Six Sigma principles.
    Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of portable precision measuring devices especially laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***
    Bachelor’s degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Metrology Engineer (Laser Tracker Operator)

    Description:
    Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

    Unique Skills:
    1. Must have extensive experience with Laser Trackers
    2. Knowledge of Metrolog X4V5, X4, and XG.
    3. Knowledge of session management and releasing in SmarTeam is a plus.

    Education and Experience Requirements:
    Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.

    Other Requirements:
    Extensive knowledge of metrology equipment, software and current measurement techniques.
    Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
    Knowledge of Lean and/or Six Sigma principles
     
    Job Number: 24-135
    Job Location: Savannah, GA
    Rate: $50/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 plus years
    Start Date: ASAP
    Input Date: 01/30/2017
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Powerplant Engineer

    Description:
    We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


    Varying Responsibilities:
    � Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
    � Evaluate certification methods of compliance.
    � Coordinate test and certification requirements.
    � Author flight test and ground test plans including test hazard analysis.
    � Participate in ground and flight tests as required.
    � Analyze test data and evaluate compliance with regulations.
    � Prepare certification test reports.
    � Occasional international travel may be required.
    � Author flight test and ground test specifications.
    � Support flight test and ground test activities.
    � Analyze test data and evaluate system operation.
    � Prepare test reports.
    � Domestic and occasional international travel is required.
    Desired Qualifications:
    � APU experience, Fire Detection/Extinguishing, fuel feed and transfer, fuel logic system
    � Engine, particularly geared turbofan engine), FADEC and engine controls, cowl anti-ice, bleed air and fuel interfaces, oil system
    � Relevant work experience related to aircraft design, test, and certification.
    � Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
    � Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
    � Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
    � Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
    � Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
    � Consulting and direct hire opportunities available.

    If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

    Candidates must have legal authorization to work in the United States, Canada or Mexico
     
    Job Location: seattle, wa
    Per Diem: possible
    Overtime: possible
    Duration: LT
    Start Date: asap
    Input Date: 02/28/2017
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Dawn Bergau
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Principal Engineer

    Description:
    Principal Engineer - Dynamics Testing

    Work as dynamics testing lead for team responsible for improving prediction of aircraft turbofan engine blade loss response, turbofan engine induction icing, Aircraft Auxiliary Power Unit response to vibration.

    Supports turbofan engine and Auxiliary Power Unit component test plan creation, instrumentation definition, instrumentation calibration. Works with the lab to get hardware measured, inspected, instrumented, and assembled for testing. Supports design input for test fixturing as needed. Supports testing to collect high sample rate strain gage and accelerometer data. Responsible for post-processing and plotting (time and frequency domain) of this test data and interpretation of results. Documentation of test findings in comprehensive reports. Communicates findings to team. Works with system dynamics modeling team to assimilate ideas and learning from testing and from team meetings into concise design practice documents. Works to capture and distill disparate ideas and data into a clear summary document.

    Preparation of aircraft gas turbine engine hardware for dynamics testing. Experienced with inspection, instrumentation and calibration, test fixturing, high sample rate data acquisition systems, post-processing and plotting of time and frequency domain vibration test data from accelerometers and strain gages. Able to review and interpret said data and summarize findings from test in clear and concise PowerPoint presentations. Dynamics background required. Rotordynamics and vibration test background preferred. Experience with turbofan engine fan blade loss and induction icing is desirable but not required. Able to work effectively on teams, capturing and documenting disparate information from testing and meetings, and compile these into clear design practice documents. Excellent verbal and written communication skills required. Able to work effectively and contribute on teams. Able to work independently and interface with focal points in testing lab to see hardware through testing.

    Basic Qualifications:

    • BS/MS degree in Mechanical Engineering or related technical field of study.
    • 8+ years experience in a related technical discipline.
    • Due to site requirements, candidate must be a US Citizen.


    OT to be billed at a straight time rate - please refer to the Addendum to Exhibit A – Aero E&T.
     
    Job Number: 17-00220
    Job Location: Phoenix, AZ
    Rate: 68.00
    Per Diem: Yes
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/17/2017
    Firm Name: NESCO RESOURCE
    Attention: Dave Mahabir
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer Aerospace Test - Contract DY

    Description:
    Project Engineer Aerospace Test
    Ingenium is looking for a Test Project Engineer to work at a client’s facility in Dayton Ohio supporting test of development high speed rotating turbine type equipment

    Must be a U.S. Citizenship or Lawful Permanent Resident. No Visa or Student Visa candidates considered.

    Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/
    Responsibilities:
    Individual is required to serve in a technical project engineering role as a member of one of the clients starting product design teams. The product will be a high speed, pneumatic driven air turbine device connected to a gearbox speed reducer. The general direction for the individual in this role will be provided by the Engineering Leader, Engineering Project Management and Marketing/Sales leadership assigned to the product.
    The role will be as a technical project engineer that will be responsible for the organization and timely accomplishment of various starting product related engineering activities. These tasks could include, but are not limited to, design, analysis, test, production support and direct customer support. It will be the responsibility of the person serving in this role to organize and directly monitor the technical activities utilizing available local and global resources. It will also be necessary for this individual to complete these activities when required. Required technical activities are to be completed in compliance with the quality and deliverable requirements provided by the project and/or marketing leadership. It will also be the responsibility of this individual to ensure completion of all necessary reports and design documentation supporting the decision-making process necessary to complete the requested activities
    Desired Qualifications
    Experience with effort required to perform static and dynamic stress and vibration finite element analyses using ANSYS software
    Experience in the monitoring and completion of design, analysis and testing in the following areas:

    • Rotating machinery
    • Power transmission and related machine design elements
    • Dynamic and static seals
    • Bearings
    • Turbomachinery
    • Fluid flow in piping and valves


    Involvement in projects requiring the design and analysis of structural housings that must survive in shock and high vibration environments
    Ability to write and organize the completion of design and analysis reports
    Ability to perform tolerance stack-ups on layout and check detail drawings with GD&T
    Basic understanding of Design for Manufacturing and basic manufacturing methods of metallic components
    Experience with UG NX CAD or equivalent 3-D design software
    Solid oral and written communication skills
    Strong interpersonal skills with emphasis on the ability to learn from and lead co-workers
    Experience in the organization of field failure reviews
    Experience with the organization and completion of multiple project initiatives in a timely manner consistent with project timeline requirements
    Experience leading technical discussions with component suppliers regarding new product
    definition and product quality.

    Responsibilities
    Participate in the design, analysis, and test elements of assigned tasks using sound engineering principles and adhering to business standards, practices, procedures while fulfilling product / program quality and delivery requirements
    Utilize technical and organizational aptitude to complete assigned project activities in alignment with project timeline objectives
    Participate in preparation of and presentation of technical and program reviews
    Assure timely completion of proper documentation of technical data generated for the assigned projects and/or tasks
    Interact with suppliers regarding completion of engineering project initiatives that include new component definition, quality concerns with existing products and in the support of field failure reviews.
    Participate in the design, analysis, and test of assigned tasks using sound engineering principles and adhering to business standards, practices, procedures while fulfilling product / program requirements
    Desired Software: LabVIEW experience is helpful but not required
    Required Education & Experience:
    Bachelor’s Degree in Mechanical or Aerospace Engineering or any specialized equivalent from an accredited university or college preferred. Comparable experience in test of comparable equipment considered
    Position: Contract 12 months
    Location: Dayton Ohio

    Employment Criteria: U.S. Citizenship is required by law or government contract for this position. This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.
    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
    Due to the requirements of the Customer, No Visa sponsorship is available.
     
    Job Number: 69997
    Job Location: Rockford, IL Illinois
    Rate: $35.00/hr.
    Per Diem: possible
    Overtime: possible
    Duration: 12 mos
    Start Date: 2 weeks
    Input Date: 01/09/2017
    Firm Name: INGENIUM TECHNOLOGIES
    Attention: David Johnson
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/399-8803 X255
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer II - Electric Propulsion WA

    Description:
    Job Title: Project Engineer II
    Job Number: 158219/5736822
    Location: Redmond, WA
    Compensation: DOE
    Assignment Length: contract

    Description:

    ** Dual citizens or candidates with current passports to non-U.S. countries are not acceptable **

    Hall, Arcjet, and Gridded Ion Thruster propulsion systems are key components of satellites used by our military, NASA, and commercial satellite service providers. Missions include interplanetary exploration, orbit-transfer, and orbit maintenance for a wide range of spacecraft. Aerojet is the premier supplier of these enabling propulsion systems. The successful candidate will help assure the success of these space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters. The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware. The successful candidate will also be a key resource in the design, development and testing of new electric propulsion products.

    Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals. Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations. The following is an approximate split of typical duties: 70% - Lead technical activities on major programs. Perform tasks, delegate tasks and make decisions required to design, analyze, build and test electrical propulsion thrusters and thruster systems. Verify Aerojet's products are in compliance with customer requirements. Demonstrate to our customers that Aerojet is the best value supplier for their propulsion needs.
    20% - Support proposal activities and manage internal research and development efforts as assigned. 10% - Key contributor on investigations, driving to closure rapidly and rigorously while applying appropriate resources and personnel in a cost-effective manner. Accumulate, prepare, and present the documentation that is required to close an investigation, including reports, Test Procedures and Work Instructions.
    Strong verbal, written, presentation, and team-working skills with proficiency in Microsoft Office products (Word, Excel, and PowerPoint) is expected.
    Skills Required:

    At least 2 years work experience in an aerospace field, working on flight hardware.
    Must know MS Office programs.
    Must have minimum BS degree in mechanical or aerospace engineering.

    Desired:

    Experience with electric propulsion devices, particularly hall thrusters or ion engines.
    Experience with testing flight hardware and production of flight hardware.


    Education
    A Bachelor's degree in a related engineering discipline and 2 years of experience in propulsion, plasma devices or mission-critical technology is required.
    A Master's degree or higher in an Engineering discipline or Physics is preferred.
    Priority will be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
     
    Job Number: MB-5736822
    Job Location: Redmond, WA
    Rate: 53/hr max
    Duration: 12 month contract
    Input Date: 01/17/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Quality Inspector

    Description:
    Unique Skills:

    Candidates must have experience with aircraft mechanical systems installation with some experience with aircraft electrical systems installations preferred. Experience with Solumina, Smarteam, and Catia V5 preferred.


    Education and Experience Requirements:

    Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Three (3) years Manufacturing Engineering, planning, or related technical experience.

    Position Purpose:

    Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning).

    Principal Duties and Responsibilities:

    Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 9. Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

    Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. 3. Perform other duties as assigned.

    Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

    Languages Required (in addition to English): No Selection
     
    Job Location: Savannah, GA
    Rate: Open
    Per Diem: Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 01/20/2017
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Andrew Walbert
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Receiving Inspector

    Description:
    Responsibilities:

    Utilizes inspection equipment such as micrometers, calipers and profilometer.
    Approves or rejects items and documents inspection results as required.
    Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements.
    Communicates with internal customers, and suppliers as required to resolve inspection discrepancies.
    Use electronic ERP system to route parts and components to proper departments.

    Basic Qualifications:

    High School Diploma or GED required.
    Minimum 5 years of aerospace precision mechanical inspection experience required.
    Experience detecting design and drawing flaws.
    Receiving and in process inspection experience is required.
    Requires the ability to read and interpret engineering drawings and specifications using ASME Y14.5.
    Experience with GD&T and use of metrology tools and gauges required.
    Experience with Microsoft Word, Outlook and Excel.

    Preferred Skills and Experience:

    Capable to operate a forklift and other related inventory equipment.
    Experience within the Aerospace, automotive, semiconductor, or electronic fields.

    Additional Requirements:

    Ability to lift 25-30 lbs., lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position.
    Must be open to working all required shift hours, including overtime, and weekends, as needed.
     
    Job Location: Redmond, CA
    Per Diem: Possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Sidney Williams
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SUPPLIER & QUALITY ENGINEERS - AEROSPACE / DEFENSE

    Description:
    SUPPLIER & QUALITY ENGINEERS - AEROSPACE / DEFENSE

    Johnson Service Group (JSG) is teamed with a leader in the fuel, combustion, fluid, actuation and electronic control systems for the aerospace, defense and commercial markets. Our client is seeking talented Supplier and Quality Engineers to provide organizational support for quality & regulatory requirements compliance, system and process improvements as well as determining root cause and corrective action.

    Scope of Experience and Responsibilities:

    -3-6+ years of quality engineering experience within a machine shop, assembly, inspection and/or test environment, ideally with high precision parts and products, such as E/M actuators, hydraulic systems, etc.
    -AS9102 experience is required.
    -Evaluate Quality Management System (QMS) procedures, documents and work instructions.
    -Track, report and analyze quality metrics and identify improvements.
    -Quality engineering activities will include: Production Part -Approval Process (PPAP); First Article Inspection (FAI); -Measurement System Analysis (MSA); Failure Modes & Effects -Analysis (FMEA) and Statistical Process Control (SPC) processes.
    -Contribute to root cause and corrective action analysis (RCCA), including 8D process.
    -Heavily involved with regulatory and/or customer audits.
    -Drive continuous improvement principles, methods and tools.
    -Perform internal quality audits.
    -Knowledge of Title 14 CFR Parts 21, 43, 45, and 145 and related FAA requirements.
    -Solid understanding of corresponding regulatory and compliance requirements.
    -Excellent communication skills.
    -Evaluates procedures and work instructions that are required per the Quality Management System.
    -Working knowledge in the interpretation of engineering specifications, mechanical drawings, electrical schematics and -Geometric Dimensioning and Tolerancing (GD&T).
    -Knowledge of ISO9001, AS9100, TS16949, QS9000 and/or TS-16949.
    -Strong knowledge of Six Sigma principles, tools and methodology, and advocates utilization throughout the organization.
    -Understanding of PLC quality process and the use of quality planning tools.

    Education/Certification:
    -Bachelor's Degree in a related technical field.
    -Green Belt certification is preferred.
    -ASQ certification is a plus.

    Type of Employment: 6 months+

    Location: Santa Clarita, CA

    Compensation: Highly competitive
     
    Job Location: Santa Clarita, CA
    Rate: Open
    Per Diem: Split
    Overtime: No
    Duration: 6 months+
    Start Date: ASAP
    Input Date: 03/01/2017
    Firm Name: JOHNSON SERVICE GROUP
    Attention: Jay Kerrigan
    Address: 950 S BASCOM AVE STE 2122
    City, State: SAN JOSE, CA 95128
    Phone: 408/728-9510
    800 Phone: 866/656-0539
    Fax Phone: 408/271-2701
    Website: www.jsginc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Maintenance Technician

    Description:
    Title: Senior Maintenance Technician
    Location: Sylmar, CA
    Duration: 12 Months

    Job Summary:
    Under general supervision, the Senior Maintenance Technician performs preventative maintenance and repairs on production equipment.

    Primary Responsibilities
    • Troubleshoot equipment problems & perform root cause analysis
    • Performs repairs on manufacturing equipment.
    • Must have good mechanical & electrical comprehension, manual dexterity, and the ability to lift up to 30 lbs. up to five times daily, occasionally moving much heavier items (i.e. 175 lbs with moving equipment).
    • Performs scheduled maintenance on manufacturing equipment (daily, weekly, monthly, quarterly, semi-annually, annually)
    • May perform other maintenance & repair tasks on manufacturing tooling, equipment, & facilities
    • May support facility, environmental, & safety requirements
    • Will be actively involved in the implementation & sustaining of TPM & SMED
    • Develop & maintain critical spare parts inventory
    • Be able to enter & retrieve maintenance data in database
    • Maintain the highest ethical standards, even when challenged from above
    • Understand and live by clients ethics and business conduct policies

    Qualifications:
    • Employee must be able to take initiative and work with minimal supervision.
    • Have an understanding of and follow safe work practices.
    • Good communication skills and ability to get along well with others is essential.
    • Have familiarity with PC running Windows & maintenance software

    Education Requirements:
    • High school education or general education degree (GED) or equivalent combination of education and experience

    **Additional Information**:
    • Candidates must have good working knowledge and experience with various CNC, Lathes, Mills and Injection Molding machines and how they operate.
    • Candidates must have a basic understanding of machining principles.
    • Candidates must have experience troubleshooting and know how to troubleshoot issues with various manufacturing equipment used such as CNC, Mills and Injection Molding machines.
     
    Job Number: 51033
    Job Location: Sylmar, CA
    Rate: USA
    Duration: 7 mos
    Input Date: 01/06/2017
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Mallik
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Design Engineer- Contract

    Description:
    Software Design Engineer

    On behalf of our client, Ingenium is recruiting and evaluating candidates for the position of Software Design Engineer. Our client is a leading manufacturer of highly complex electromechanical, mechanical, and hydromechanical aerospace components and systems for government and commercial applications. This is a contract position located in Buffalo, NY and is expected to last 8 months.

    Must be a US Citizen

    This position is responsible for planning and executing the development and test of control software that will be embedded in new products, within the cost and schedule constraints established for the project. The Software Design Engineer is a trained professional who determines the approach necessary to resolve technical challenges.

    Principal Responsibilities:

    • Delivery of executable software that meets performance requirements, as demonstrated by validating and verifying the software
    • Delivery of other software work products (documentation) that meets contractual requirements and conformance
    • Perform project planning and oversight, and provide status reporting management during project execution
    • On larger projects, lead a small team of other software engineers to accomplish a portion of the software development work, e.g., low-level design, code, or test
    • Control software project cost through reporting of earned value management data, and reporting scope changes to project management.
    • Control software project schedule through reporting of earned value management data, making sure that critical dependencies on other groups are part of the project’s Master Schedule, and by being responsible for delivering software work products on time
    • Aid in ongoing improvement by suggesting improvements, reporting metrics, and participating on Process Improvement Teams.

    Technical Skills: Must have LabVIEW programming experience

    Education:

    • Bachelor of Science degree in the field of Electrical, Computer, or Software Engineering, plus a minimum of 5 years’ experience in the design/development/test of real-time control software
    • Bachelor of Science degree in other engineering fields, and Computer Science, may be considered with appropriate additional experience in the design/development/test of real-time control software

    Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to verify US Citizenship.

    Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation, or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment
     
    Job Number: 63492
    Job Location: Rockford, IL Illinois
    Rate: $45-50/hr.
    Per Diem: no
    Overtime: possible
    Duration: 8 months
    Start Date: immediate
    Input Date: 12/28/2016
    Firm Name: INGENIUM TECHNOLOGIES
    Attention: David Johnson
    Address: 4216 MARAY DR UNIT A1
    City, State: ROCKFORD, IL 61107
    Phone: 815/399-8803 X255
    Fax Phone: 815/399-8804
    Website: www.ingeniumtech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer

    Description:
    ***Requires Active Secret Clearance***

    Description:
    This position supports Guidance, Navigation and Control (GN&C) efforts including day to day coordination between the program teams responsible for these combined efforts. Responsibilities also include integration and coordination with software design, implementation, and systems integration teams. Tasking also includes reporting to Technical Management and Cost Account Manager responsible for subsystem architecture and vehicle management (which includes software, guidance and control design and analysis). Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration and test. Requires knowledge and experience in Navigation design and implementation and knowledge and experience in seeker/radar integration into Navigation solution and Kalman filter design, trades and performance.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. Prior experience in hypersonic flight regime is highly desired. The selected candidate will participate in addressing GN&C direction with senior leadership and the customer at program meetings.

    Mandatory:
    MATLAB/Simulink
    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering and several years of related experience. Hands on experience in the design of flight control laws. Must have a good understanding of aircraft stability, control, and aerodynamics.
     
    Job Number: 74097
    Job Location: Palmdale, CA
    Duration: 15 mos
    Start Date: ASAP
    Input Date: 12/28/2016
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: Ram
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret / flight control analysis software skills required CA

    Description:
    Lockheed Martin Aero 0355
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance: No, Interim Clearance Sufficient: No)
    1st shift
    Non exempt

    Description:

    This Flight Controls lead position is a technical position performing complex guidance and control design and analysis for LM Aero - Advanced Development Programs.

    Responsible for guiding the design, development, integration and test of flight control laws.

    Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration, and test of vehicle systems.

    Prior experience in hypersonic flight regime is highly desired.

    Must have a good understanding of aircraft stability, control and aerodynamic characteristics.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired.

    The selected candidate will represent the program as a technical subject matter expert within the field of flight controls and will interact with senior leadership, customer and suppliers at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance with ability to obtain SAP/SAR access

    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering.

    Minimum 10+ years of hands-on experience in the design of flight control laws (algorithms & software) for aviation applications.

    Proficient with simulation/control laws (6-degree-of-freedom)development tools, aircraft/system modeling and Matlab/Simulink software.

    Desired:

    Demonstrated experience in all phases of flight control laws design life cycle - from requirements development, conceptual design, detailed design, code generation, software verification & validation, ground test and flight test phases.

    Knowledge and experience in Guidance and Control Algorithm design and implementation for high speed weapons.
    Familiarity with flight worthy software development process.
     
    Job Number: SW-0355
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 01/13/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0354
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non exempt
    1st shift


    Description:

    This position supports Guidance, Navigation and Control (GN&C) efforts including day to day coordination between the program teams responsible for these combined efforts. Responsibilities also include integration and coordination with software design, implementation, and systems integration teams. Tasking also includes reporting to Technical Management and Cost Account Manager responsible for subsystem architecture and vehicle management (which includes software, guidance and control design and analysis). Must have demonstrated working knowledge of flight control system architecture, autonomous control algorithms & analysis, system integration and test. Requires knowledge and experience in Navigation design and implementation and knowledge and experience in seeker/radar integration into Navigation solution and Kalman filter design, trades and performance.

    Strong system engineering experience and the ability to mechanize the requirements for Guidance, Navigation and Control systems is highly desired. Prior experience in hypersonic flight regime is highly desired. The selected candidate will participate in addressing GN&C direction with senior leadership and the customer at program meetings.

    Skill/Experience/Education
    Mandatory:

    Current SECRET clearance
    MATLAB/Simulink
    Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering and several years of related experience. Hands on experience in the design of flight control laws. Must have a good understanding of aircraft stability, control, and aerodynamics.
    Desired:

    Proficient with 6-degree-of-freedom simulation/control laws development tools, aircraft/system modeling and Matlab/Simulink software
     
    Job Number: DW-0354
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 03/30/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Software Engineer with active secret CA

    Description:
    Lockheed Martin Aero 0353
    Job Title: Software Engineer
    Location: Palmdale, CA
    Compensation: 60-70/hr
    Assignment Length: 4 month contract
    Security Clearance: Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)
    Non Exempt
    1st shift

    Description:

    This GN&C engineer position is with our Historic Skunk Works in Palmdale, California.

    This is a technical position performing complex guidance and control design and analysis for precision guided munition systems. Job responsibilities include GNC System design, analysis, modeling, and simulation.

    Apply knowledge of guidance, navigation, and control theory to develop optimum trajectory guidance laws.

    Develop autopilot control laws (modern and classical). Develop guidance algorithms and conduct flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis.

    Apply digital signal processing techniques and navigation system error analysis to verify sensor and filter performance.

    Perform post flight reconstruction and analysis.

    Develop, modify, and maintain software tools. Perform research and prepare presentations and reports.

    Skill/Experience/Education
    Mandatory:

    Current SECRET and ability to obtain a SAP/SAR clearance

    MATLAB/Simulink

    Master's Degree in Electrical, Mechanical or Aerospace Engineering or Applied Mathematics or Applied Physics 7+ years of experience in Guidance, Navigation or Controls theory and analysis.

    Desired:

    Demonstrated track record developing advanced autopilots, guidance laws and Kalman Filtering.
     
    Job Number: DW-0353
    Job Location: Palmdale, CA
    Rate: 60-70/hr DOE
    Duration: 4 month contract
    Input Date: 03/21/2017
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com