Job Search Results

853 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 05:23AM Pacific Time by ContractJobHunter. )

Listings 1 - 853

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 System Design Engineers - hydraulics, Landing Gear or fuel Systems Experience Needed

Description:
Seeking System Design Engineers with 10+ years of experience with detail design of mechanical systems. (hydraulics, landing gear or fuel, etc.) utilizing Catia V5. BS Degree required.

***1 position is located in Manassas, VA and 1 position will be located in Cambridge, MA.***


Duties:
Design aircraft mechanical systems based on customer requirements
Establishes manufacturing tolerances for production of components using GD&T
Design for Manufacturing (DFMA)
Supports review of manufacturing plans and procedures to ensure compliance with design requirements


Requirements:
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution much preferred.
Experience with CATIA V5
Experience in detail design of aircraft mechanical systems, or aircraft composite/metallic structure.
Experience designing hydraulics, landing gear or fuel systems.
DFM experience required
Minimum of 10+ years of experience as a design engineer within the aircraft industry.
Experience with Model Based Definition and GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
US Citizen required



The Structures Company is an AA/EOE.
 
Job Number: 278
Job Location: VA & MA
Rate: $75-$78/Hr.
Per Diem: Yes
Duration: 9 Months - Possibly longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2471 - PROPULSION/PNEUMATIC SYSTEMS - AFTERNOON SHIFT

Description:
Provide Propulsion/Pneumatic Engineering support to the Client Final Line Assembly during afternoon shift.

Witness system functional testing and conduct technical investigations on Propulsion and Pneumatic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within BA and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset

Experience in providing engineering support to a Final Line/ Production

15 years' experience in aircraft Propulsion and/or Pneumatic systems (High and Low Pressure Ducting, Environmental Control System, Avionics Cooling, Oxygen System, Power plant, Fuel systems, etc)

Conversant with design, qualification and certification test requirements of Propulsion and/or Pneumatic systems

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Familiar with Microsoft Office software tools

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Regular Shift = Afternoon Shift (3:30 to 12:00) ;
 
Job Number: 2471
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2527 - AVIONICS ISE ENGINEER - 2527 - cv, word doc only

Description:
Lead resolution of technical in service issues for the Client Family of aircraft.

Coordinate technical investigations with other engineering disciplines, suppliers and aircraft operators.

Prepare and issue Electrical and Avionics related product changes, modifications and repairs.

Answer technical queries from the Field Service Representatives and the airline operators.

Be involved in operators' conferences and operator technical reviews.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and avionics systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Investigate avionics system problems identified on aircraft in service or in production. Provide engineering dispositions. Support Continuous Airworthiness (CAW) processes.

Bachelor Degree in Aeronautical Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment.

Must have at least 10 years relevant experience with the specification, design, development, integration, test and certification of Avionics systems on aircraft.

Knowledge of certification requirements is required.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must be computer literate and familiar with commonly used software (MS Office).

Catia V5 experience is an asset.

Must have strong investigative skills.

Are self-starter, enthusiastic, well organized and customer oriented.

Previous experience with Network Security or (FMS) Flight Management System or Autoflight and generic working knowledge of Navigation and communication system is required.

Familiarity with part FAR25 / 525 certification process is an asset.

Experience with civil aircraft and airworthiness authorities is an asset.
 
Job Number: 2527
Job Location: Mirabel, Canada
Rate: 55.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2551 - REPAIR DESIGNER - ISE STRUCTURES - cv, word doc only

Description:
Actively support the Client Aircraft design team to ensure customer expectations are met.

Design generic repairs for metallic and composite structures.

Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.

Support operators with technical support on repair-ability of their Client Aircraft fleet.

Perform investigation on in-service structural issues affecting reliability, dispatch-ability and repair-ability.

Participate in the design and support of structural modifications.

Represent Client Customer Support in internal and external committees.

Participate in the continuous improvement initiatives of the Customer Support organization.

Bachelor degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.

Detailed knowledge of CATIA V5 (preferably R19) and Enovia.

Are comfortable in interrogating aircraft structure repair.

Knowledge of MS Office software (Word, Excel, PowerPoint, etc).

Dynamic person with initiative, a strong sense of responsibility, customer oriented and good judgment.

Are organized, able to manage your time and prioritize tasks effectively, while working toward tight deadlines.

Bilingual - have strong, written and spoken, communication skills in English and French.

Available for occasional travel on short notice.

Having knowledge of Client Aircraft engineering, drawing and configuration control systems is an asset.

Having detailed knowledge of airline operation, engineering and maintenance is an asset.
 
Job Number: 2551
Job Location: Mirabel, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Embedded Software Engineer -Simulations (73)

Description:
*This is a full time, 1 year contract position, located on site in Fort Worth*

We are looking for a contract Real Time Embedded Software Engineer to design, develop, implement, and verify real time aircraft or missile simulation software.

Day to day work may include full dome simulations, high fidelity, man in the loop simulation/mission systems, vehicle testing and integration, and verification/validation.

Required:
*9+ years’ experience developing, integrating and testing simulation software in a high-level language.
*Embedded RTOS development experience
*Experience in Rapid Prototyping, man in the loop simulations, and system verification/validation
*Active Secret Clearance, with an investigation in last 5 years.
*Engineering Degree


Pluses:
*Experience in Programming in C++ and/or Matlab and Fortran
*Good mathematics including curve fitting and regression, linear algebra, algorithms.
*Experience with DOFs and missile applications.
*Familiar with Kalman Filters
 
Job Number: 073
Job Location: Fort Worth, TX
Per Diem: Split
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Thomas Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C, C++ RTOS Software Engineer Secret Clearance (US Citizens Only!) (175)

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*

We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.

All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared

Required
*4-8+ years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Current Active (or active in last 2 years) Secret Clearance; which requires US Citizenship in order to apply.
*BS degree in Engineering, Computer Science or equivalent



Pluses:
*Familiar with communication busses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience with CM tools Razor, Accurev, Git, JIRA, SVN.
*Familiarity with Visual Studio (i.e., Visual C++).
*Experience developing with C#, familiar with Qt
*Development in an Open architecture, multi-core processing environment.
 
Job Number: 075
Job Location: Orlando, FL
Per Diem: Split
Overtime: yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Analyst 3 CA

Description:
Computer Systems Analyst 3 (Job Number: 19003514)

# of Openings: 1

Shift: 1st

Target Start Date: Mar 11, 2019

Target End Date: Mar 6, 2020

Rate: $52-$57/hour

Location: Redondo Beach, CA

Duration: 12 Months

Shift: 1st Shift - 9/80

Clearance: Not Required

Essential Functions:

•Develops computer systems specifications that address business requirements and that fit with the companies system architecture standards.
•Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities
•Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.
•Manages all aspects of ongoing projects and serves as liaison between various stakeholders.
•Reviews status of projects and budgets; manages schedules and prepares status reports.
•Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Individual will be responsible for managing large and small scale projects for programs and functional homeroom
•Works independently with little oversight.
•Candidate needs to cooperate with teammates on best practices and possible re-use of applications.


Basic Qualifications:

•A minimum education of a Bachelor's Degree in s STEM discipline (Science, Technology, Engineering or Mathematics) A minimum of 5 years’ experience with a Bachelor's Degree (3 years with a Master's degree and 0 with a PhD.) in C#, MS Visual Studio, ASP.NET MVC, JavaScript , AJAX, XML, Web Services and related technologies, T-SQL and DTS packages for MS SQL Server, MS VBA, SSRS.
•Working knowledge of Python and ShinyR. Experienced in machine learning, advanced analytics, and data visualization.
•Candidate must be able to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
•Candidate must be able to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.
•Candidate must be able to juggle multiple assignments and manage changing priorities.

Preferred Qualifications:

•A Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
•Strong understanding of product quality and statistical process control.
•2-3 years of experience working with statistical process control.
•Strong project management and communications skills are highly desired.
•Ideal applicant will be enthusiastic about process improvement, efficiency, excellent customer service, and working with different teams from all functions.
•Strong project management and communications skills are highly desired
 
Job Number: MB-1727ATO
Job Location: Redondo Beach, CA
Rate: 57/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Architect 4 CA

Description:
Computer Systems Architect 4 (Job Number: 19009600)

Number of Openings: 1

Location(s): United States-California-Manhattan Beach


Shift: 1st Shift

Target Start Date: May 6, 2019

Target End Date: May 1, 2020

Pay: $65.00 - $70.00 per hour

Work schedule: 9/80

Location: Manhattan Beach, CA

Duration of Assignment: Up to 1 year

Position Summary / Responsibilities

We are looking for an individual who will support custom test controllers, special test equipment and

networks in the engineering areas. Strong system administration skills and IT hardware and operating systems are

required to support high availability/dynamic environments such as engineering labs and Integration and test beds in the

Space program areas

Recurring responsibilities:

- Use Enterprise Level hardware and application software and setting up centralized services

- Design technical sound solutions for system requirements including both functional and the security compliance

- Implement security controls and profiles and communicate with information security/computer security office to ensure

compliance.

- Repair and recover from hardware or software failures

- Deliver updates and coordinate with impacted team including conducting reviews and presenting findings.

- Perform continuous monitoring for systems, including documentation for supporting the process.

- Develop patching and remediation activities including developing the end to end process with users and implementing

them.



Qualifications


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
 
Job Number: JK-1754
Job Location: Manhattan Beach, CA
Rate: 70/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Description:
Design Engineers – Aircraft Structural Repairs – Permanent - Canada.

Candidates sought from the US and Canada ,or those with right to live and work in Canada.

Successful candidates will:

·Actively support our client’s design team to ensure customer expectations are met.
·Design generic repairs for aircraft metallic and composite structures.
·Design specific repairs for damages exceeding Aircraft Structural Repair Publication (ASRP) limitations.
·Support operators with technical support on repairability of their aircraft fleet.
·Perform investigation on in-service structural issues affecting reliability. dispatchability and repairability.
·Participate in the design and support of structural modifications.
·Represent Customer Support in internal and external committees.
·Participate in the continuous improvement initiatives of the Customer Support organization. 

Preferred Experience:

·You hold a Bachelors degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) years in the aerospace industry.
·You have detailed knowledge of CATIA V5 (preferably R19) and Enovia.
·You are comfortable in interrogating aircraft structure repairs.
·You have knowledge of MS Office software (Word, Excel, PowerPoint, etc).
·You have strong, written and spoken, communication skills in English and French.
·You are available for occasional travel on short notice.

Our Client offers good packages to successful candidates, who join them.

Please quote ref JO0000000225 on application.
 
Job Number: JO0000000225
Job Location: Canada
Rate: Negotiable
Start Date: 03/04/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer 4 / NX 8.5 FL

Description:
164134
1729 Designer 4 (Job Number: 19003773, 19003777, 19003782)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Oct 4, 2019

Pay Rate: $45/hr

Work Schedule: 9/80

Duration of Assignment: Approx 6 months

Seeking experienced Aircraft Structural Designers.

Candidates should have design experience with a focus on metallic structure, wing structure design, machined part

design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material,

process and hardware.

NX 8.5 or later required with PMI knowledge a must.

Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

(Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.


Basic Qualifications:

High School Diploma/ GED plus 8 years minimum aircraft metallic structural design experience.

CAD Experience using Siemens NX 8.5 or later.


Preferred Qualifications:

Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

(Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

Design of aircraft wing structure.

Familiarity with Design Review Process.

Microsoft Office Suite.

Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously
 
Job Number: MB-1729
Job Location: Melbourne, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Document Management Architect

Description:
Document Management Architect

Windsor Locks, CT
$90.75/hr
6 month contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
This major aerospace company utilizes Document Management tools in a global environment. Will need to support the current companies Communications and Collaboration collection of document management applications. Specify design and implement Document Management software and its integration with other applications. Participate in companies Collaboration Tools strategic projects. Select, blueprint, gather requirements, design, and roll out solutions to end users. Ensure our systems stay compliant with Company policies, US and International laws. The Document Management Architect is also responsible for ensuring high levels of system availability through monitoring and in-depth testing. Execute IT projects that support Company Aerospace Systems business objectives. The projects can include developing custom applications or implementing software solutions purchased from a third party Application Service Providers. Projects typically involve working with Company divisions.

1. Build and configure Document Management environments.
2. Support and maintain existing installations of Documentum.
3. Perform configuration changes as needed on production environment which are submitted through Help Desk tickets and service requests.
4. Review and fix Documentum security as needed.
5. Ensure knowledge transfer of best practices.
6. Provide ongoing operation and maintenance activities including periodic software upgrades.
7. Ensure technical architecture designs are compatible with the department's current / future standards and are supportable.
8. Assess and cultivate long-term strategic goals for Documentum development in conjunction with end users, managers, clients, and other stakeholders.
9. Direct, organize, and lead projects in the implementation and use of Documentum software tools and systems.
10. Design, test, and document all modification of the Documentum environment.
11. Analyze user requirements and, based on findings, design functional specifications for Documentum.
12. Conduct job duties and responsibilities according to the organization’s business systems development methodology and/or its Systems Development Life Cycle (SDLC) methodology. Also, familiar with the Agile methodology.
13. Assist end-user training and training materials; provide technical support as necessary.
14. Troubleshoot tools, systems, and software; performance-tune these applications as necessary.
15. Remain abreast of trends in relevant software and technologies. As required, lead efforts to analyze and recommend solutions.

Experience/Skills:
1. Experience / knowledge the following technologies:
• Documentum 7.x, including DA, Webtop, xPlore, API/DQL queries
• D2 4.7 Development & Configuration, C2, and D2
• Support of Captiva 7.5 Modules and Customization
• Microsoft .NET Software Development
• Linux Server Administration
• C#, VB .NET
• Windows Server
• Microsoft SQL Server Basics
• Oracle Basics
2. Minimum of 7 - 10 years direct work experience.
3. Strong ability to install and configure a Documentum.
4. Strong understanding of Documentum: theories, principles, and practices.
5. Exceptional analytical, conceptual, and problem-solving abilities.
6. Strong understanding of the organization’s goals and objectives.
7. Strong written and oral communication skills.
8. Strong presentation and interpersonal skills.
9. Able to prioritize and execute tasks in a high-pressure environment.
10. Experience working in a team-oriented, collaborative environment.
11. Experience will be acceptable in lieu degree.
 
Job Number: 10309
Job Location: Windsor Locks, CT
Rate: 90.75
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certified Interconnect Designer (CID) - Electrical Designer / CAD Drafter

Description:
The Electrical Designer/CAD Drafter position will have emphasis on Aerospace Electronics Circuits.

Activities will include:
• conceptual layout,
• detailed design, and
• engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high-power PCB layout designs.
• Interfacing with other engineering groups to insure design requirements are fulfilled.

The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

Responsibilities may include:
• Interpreting electrical design requirements and creating original board layouts, detailed drawings, schematics, and illustrations
• Providing for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
• Performing specialized electrical design computations and analysis
• Preparing diagrams and PCB design schedule estimations.
• Coordinating electrical design work with Electrical Design Engineers
• Collecting background information and helping write specifications and electrical design practices
• New product development from concept through production
• Processing documents through document change system

Required Qualifications:
• IPC Certified Interconnect Designer (CID), as a minimum.
• Minimum 5 years’ experience with Cadence v16.6 – v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
• Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
• Thorough knowledge of Cadence Library manager.
• Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
• Experienced in implementing manufacturer’s data as well as PCB and CCA suppliers DFM recommended suggestions.
• Full understanding of PCB, FAB and CCA manufacturing processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail.
• Must be a US Citizen or US person.

Preferred Qualifications:
• IPC Advanced Certified Interconnect Designer (CID+).
• Experience with Siemens Teamcenter PLM Software.
• Knowledge of GD&T ASME Y14.5.
• A background working on avionics design related experience
• Knowledge of and the use of Hierarchal schematic blocks
• Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow
• Experience with Microsoft Visio
 
Job Number: 1910100867
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Propulsion Experience Needed

Description:
Description:
Responsible for the design, testing and certification of engine electrical systems and harnesses.

Requirements:
• Must have aircraft engine experience
• Must have aircraft EBU experience
• Must have commercial aircraft experience, preferably Airbus
• Must have experience designing and testing engine wire harnesses
• Must have experience with CAD software such as Catia V5, Mentor Graphics, EWIS, etc.
• DO-178 or DO-254 Certification
• Electric Actuation and Propulsion
• Vehicle Communications System
• MS Office, Project and MS Visio

The Structures Company is an AA/EOE.
 
Job Number: 294
Job Location: OK
Rate: $75/Hr.
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic System Design & Analysis

Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education/experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: ESDE_OK
Job Location: Oklahoma City, OK, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Software design, implementation, testing, and system integration to port existing waveform code onto a real-time embedded system.
Requires work related experience with real-time software for embedded applications and software development experience with C/C++.
Experience with RTOS such as VxWorks or INTEGRITY and associated IDEs, workbenches, or equivalent development tools also required.
 
Job Number: NH48637
Job Location: Fort Wayne, IN
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Development experience using C++
Experience with Linux and embedded operating systems such as LynxOS
Experience with low level Analog/Digital IO
Familiarity with vehicle / computing communication bus technology (Gigabit Ethernet, RS-232, CAN) and their protocols
Troubleshooting experience involving Ethernet and CANbus
Familiarity with embedded systems
GUI Development with QT
Familiarity with OpenSplice or DDS
Familiarity with military embedded systems software development Familiarity with commercial design standards
 
Job Number: 3491
Job Location: MN
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Embedded Software Engineer

Palmdale, CA
DOE
9 month W2 contract
First Shift
**MUST HAVE AN ACTIVE DOD SECRET CLEARANCE**

Description:
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating software. Develop, analyze, integrate, and test embedded software for the Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Modeling and simulation efforts. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Good presentation skills.

Requirements:
Required skills -
C++ (4+ years required),
Embedded Systems (4-6 years required),
HWILL,
AGILE,
experience developing/writing COMM/NAV Avionics Software
Bachelors degree
 
Job Number: 10741
Job Location: Palmdale, CA
Rate: 95.00+
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Description/Comment:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.
The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation.
It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
* Proficient with C programming language, and embedded systems in a lab environment.
* Experience with Microprocessors, Microcontrollers, and/or DSPs
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
* 6+ years experience in software development
* Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Model Based Development, using SysML, Simulink or SCADE
* Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
* Knowledge and use of ADA, Assembly, Perl, C#
* Software Verification including, test procedure development, robustness testing and debug
* Experience with software configuration management and problem reporting tools
 
Job Number: AZ48423
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Level Mechanical Manufacturing Engineer

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate will: •create manufacturing assembly documentation and concept tools and provide technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
•ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
•be able to perform cost estimates, work to schedules, and write procedures and policies.
•be able to review drawings and concepts and resolve producibility concerns.
•provide technical support to the manufacturing facility as well as to the external suppliers.
•support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
•be able work well in an integrated product development/ design environment.
•present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
•possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications •Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications •Candidate must have 0-2 years of experience working on the manufacture of complex mechanical systems.
•Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Desired experience •working on the manufacturing of components such as heat exchangers, pumps, fans, & accumulators.
•Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
•Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
•Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
•Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910099444
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV - (Everett, WA)

Description:
Several openings in WA:

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

CATIA V5

Prefer an AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipTDEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer – Level 2

Description:
Location: Camden, AR
Rate: $45.00 - $50.00/HR
Duration: 6 month contract
Shift: 4/10 Schedule (OT Possible)
Per Diem Split: Yes (if eligible)

**Candidates must be U.S. Citizens**
**Permanent residents are NOT eligible for this role**
**Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

Duties:
Under general direction, the Senior Facilities Engineer determines approaches to objectives demonstrating a complete understanding and application of principles, concepts, and practices.

Typical responsibilities include:
- Provides solutions to problems involving unusual complexity
- Conceives and plans facilities engineering projects involving the development of new approaches and methods to attain objectives
- May provide input to department objectives and long-range goals
- Keeps current within area of specialty in support of project assignments
- Provides technical advice on projects, including feasibility, planning, costs, and time
- Prepares data required for special projects to ensure maximum cost effectiveness
- Acts as a technical advisor and expert on process systems, as well as equipment and manufacturing facilities
- Ensures that work performed by the Company’s personnel or contractors conforms to national, state and local laws, regulations and codes
- Develops standards and design criteria for projects such as the construction and renovation of facilities, office and plant layouts, space planning, etc.
- May direct critical projects with large scope and difficult complexity
- May represent the organization at staff meetings, project review meetings, etc.
- May assign projects and provide direction to less senior employees and support staff
- Represents the Company as the prime contact on assigned facilities engineering projects
- May plan, schedule, oversee, and assign preventive maintenance and repair assignments
- Plans procurement strategies and provides technical expertise in the construction of well head facilities, pipelines, and treatment plants

Knowledge of:
- Facilities Engineering principles and practices
- Standards, codes, and regulations pertaining to the design, construction, and maintenance of structures and facilities
- Computer systems and applicable software
- Modern materials, methods, and techniques of design, construction, installation, and maintenance of structures and facilities
- Site remediation and treatment operation
- Development and use of contracts, estimates, and specifications
- Techniques and procedures of project management and procurement
- Occupational Safety and Health regulations and safe work practices
- Elements of cost in construction and maintenance, including the determination of unit cost records
- Cost of construction and maintenance, including the determination of unit cost records
- Building construction processes and procedures, equipment, tools, materials, and their application
- Local, state, and federal building codes and standards
- Inspection and investigation techniques
- Use of engineering instruments and tools
- Facility and equipment maintenance principles and practices

Ability to:
- Make engineering designs and prepare complete plans for projects
- Maintain records and prepare reports and correspondence related to the work
- Physical skill and ability to inspect working environments, which may include climbing ladders and operating equipment
- Communicate effectively with others
- Maintain favorable public relations
- Read and interpret construction blueprints, plans, drawings, and specifications
- Analyze costs of construction projects
- Determine compliance of structures and specifications
- Learn and utilize computer aided design system
- Maintain records and prepare reports and correspondence related to the work
- Use computers and available software applications to maintain records and prepare technical reports

Education:
- A Bachelor's degree in an appropriate discipline and three (3) years of directly related experience, or an equivalent combination of education and experience.
 
Job Number: 10572
Job Location: Camden, AR
Rate: $45.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

Support engineering with test plan creation.
Discuss, write and review test cards and test hazard analysis
Support and/or lead test preparation activities, test execution, post-test activities
Support and/or lead pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced electrical instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10744
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrument Engineer

Description:
Flight Test Instrument Engineer

Windsor Locks, CT
$67/hr
1 year W2 contract
First Shift

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.

Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.

Experience with advanced instrumentation and data acquisition systems is required.
Knowledge of LabVIEW desired.
Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated.
Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.

-Bachelors degree required
 
Job Number: 10637
Job Location: Windsor Locks, CT
Rate: 67
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
This can involve testing, data analysis, and interface with all aspects of the engineering department.
Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing,Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met. Typical Duties: Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve productivity concerns.
Experience with advanced electrical instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.
 
Job Number: CT48505
Job Location: Windsor Locks, CT, CT
Rate: 65.00
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
Fuel System Engineer responsible for the design of the Fuel System and related system integration. This includes requirements definition, specification and ICD creation, Supplier coordination, test execution, drawing creation, product certification, product improvement, and field support. Ability (or interest) to conduct fuel system performance analysis using 1-D fluid flow simulation software (i.e. Flowmaster, AMESim or similar analytical tools) is highly desired, but not required.

Duties and Responsibilities:
• Communicates effectively in both verbal and written format. Candidate should be able to adjust communication content and approach based on audience
• Manages task execution to ensure on-time and on-target completion
• Searches for problem root cause and develop corrective action plans and solutions
• The primary role of this position within the team will be as a general fuel system engineer. Specifically, this will entail:
o Support fuel system production and field issues with troubleshooting.
o Implement design improvements to the current fuel system design.
o Interface with current fuel system suppliers to manage supplier changes
o Participate in testing including supplier qualification testing, and flight testing
o Able to manage the certification aspects of major and minor changes including test plans, test reports and analysis reports that will be submitted to the FAA
• An additional role for this position within the team will be as a fuel system performance analyst; is desirable to find a candidate that has proficiency or interest in performing this analysis, but not a required skill. If interested, this role will entail
o Modeling the fuel system using a 1-D fluid flow simulation software such as AMESim or Flowmaster
o Performing performance assessments of the fuel system including tank filling performance, fuel distribution and supply performance, vent system performance, unusable fuel simulations, negative acceleration simulations and other system performance simulations
o Comparing analysis results to flight test data
o Evaluating performance impact of proposed design changes
o Writing reports documenting analysis results
• Additional roles within the team may be available at different program phases

Education, Work Experience, Certification and/or Licensure:
• BS in Engineering with 5 or more years directly related experience or MS in engineering with 3 or more years of experience
• Previous aerospace experience at either Supplier or OEM
• Some Travel will be required


Knowledge, Skills and Abilities:
• Familiar with industry documentation for design, test, and certification of propulsion systems
• Proficient in Microsoft Office Products.
• Familiar with FAR Part 23 or Part 25.
• Familiar with Industry standards such including DO-160, MIL-HDBKs and SAE ARPs.




The Structures Company is an AA/EOE.
 
Job Number: 297
Job Location: NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance Navigation & Control Engineer (Embedded Software Development)

Description:
Client is seeking a multi-disciplinary engineer to design, implement, and verify embedded flight electronics software algorithms, working under minimal direction.

Responsibilities include:
• Eliciting and defining the software requirements.
• Designing, implementing, and integrating a solution to meet the requirements.
• Planning and executing the validation of the requirements and verification of the solution.
• The solution design and implementation are developed using Model-Based Design languages (Simulink, embedded MATLAB, and Stateflow), from which C++ code will be generated.

Area of Expertise:
•Embedded Software Development
•FAA certification requirements

Technical Skills:
•Simulink
•Version Control
•Requirements Development
 
Job Number: GNCDEC
Job Location: Long Beach, CA
Rate: Best in Market
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Performance Analyst and Investigator

Description:
Currently looking for an experienced Human Performance Analyst to fill an opening with a company located in Moses Lake, WA. Interested candidates should have a Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field, along with at least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.

Responsibilities of the Human Performance Analyst

Serve as the safety team’s expert on human performance, team dynamics, and flight physiology.
Advise aircrew, dispatchers, test managers, and the Flight Test Safety Officer on scientific aspects of human psychology, physiology, ergonomics, and anthropometrics.
Provide human performance insights to help the Flight Test Safety Officer prepare Test Hazard Analyses, Safety Review Boards, and related functions.
Assess proposed flight manual changes and procedures for adherence to best practices in human performance.
Work with the Flight Test Safety Officer to develop a program of non-punitive observation of flight simulations.
Perform the observations, then debrief the flight crew and trend the data collected in a fashion similar to Line Operations Safety Assessments (LOSAs), but limited to the simulator.
Carefully review event reports and newly found hazards for human elements and how they impact risk and potential mitigations.
Develop and administer psychographic surveys to determine safety cultures and climates present in different parts of the organization, trend how they change over time, and analyze possible causes responsible for the changes.
Establish, adjust, and track Safety Performance Indicators (SPIs) and Allowable Levels of Safety Performance (ALoSP) associated with human performance, as part of SMS Safety Assurance requirements.
Create original and customized courseware in CRM/TEM and human performance for the unique intercultural employees and then coordinate with other members of the safety team to facilitate and instruct using innovative methods that use the most modern education and training technology.
Provide expert insights on the psychological barriers to change as new safety initiatives are fielded.
Create a system for tracking the currency of aircrew flight physiology training, to include altitude chamber initial and recurrent training.
Perform ergonomic assessments of workplace settings, ranging from aircraft seating to office functions conducive to repetitive stress disorder.
Work shifts as the “on-call” safety representative for time-sensitive safety issues, to include occasionally being on-call after normal business hours.
Assist and/or lead incident investigations and participate in management review of all serious incidents.
Develops and implements the human performance elements of the Risk Management (RM) program and instructs strategic and real-time RM principles to employees and executive staff.
Participate in annual budget and requirements development process for the safety team.


Requirements
Bachelor’s Degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a bachelor’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
Current driver's license and current civilian passport or ability to obtain passport.
Ability to pass drug screening test.
Respectful of other national and professional cultures and possessing a willingness to learn about other cultures.
Ability to use computers and associated software programs, such as MS Word, PowerPoint, and Excel.
Ability to integrate smoothly into a fast-paced technological environment while remaining calm in situations where others may be overwhelmed.
Ability to field and prioritize a multitude of near simultaneous request from different members of a team while remaining courteous, positive, and effective.
Strong analytical skills with demonstrated problem solving ability.
Excellent written and verbal communication skills for presenting safety and human factors information.
Excellent interpersonal skills and intercultural sensitivity to work effectively with all levels of an international organization.
Preferred

Master’s degree in Safety, Human Factors, Risk Management, Aviation Maintenance, Aeronautics, or a related field.
At least 2 years’ experience after earning a master’s degree, working directly as a specialist or instructor of human factors or human performance or flight physiology.
An understanding of the ICAO or FAA SMS organizing framework.
Experience conducting human factors analyses, such as task analyses and human error analyses, associated with accidents, incidents, or voluntary hazard reporting such as the Aviation Safety Action Program (ASAP).
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Yes
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Project Manager

Description:
Our client's Global Business Systems (GBS) IT is looking for a highly motivated, business-focused IT Project Manager (PM) to join its Business Application Services (BAS) project office.

The BAS Project Office is part of an enterprise shared services organization, and is responsible for leading significant business transformation technology projects that span across the company. These projects span the business functions and our organization supports both Enterprise as well as Business-specific solutions.

This position will lead $200,000 to $2M, high visibility internal technology projects in a fast-paced environment. Using our client's corporate project management processes and methods, the PM will lead cross-functional, multi-business teams; collaborating at all levels of the enterprise to ensure project success and satisfied stakeholders. The PM is ultimately responsible for planning and executing the project, and enabling the internal customer organization to achieve their objectives and realize business value.

The position reports to the BAS Project Office.

Additional Job Details:
* Lead project initiation, definition, planning, coordination, and delivery of key strategic initiatives
* Coordinate with stakeholders to define business objectives, determine scope and funding needs, and establish business cases supporting project investments
* Prepare project execution plans and ensures projects are completed on schedule, within budget, meet technical requirements, and achieve business objectives
* Select, develop, and leverage appropriate technical and business resources needed for successful project execution
* Align project team around the project's visions, strategy, goals, and business objectives
* Manage cross-functional project teams; Manage project resources; Track team member performance; Maintain project repositories
* Coordinate and control team activities, including technical implementation tasks, process re-engineering, and organizational change activities to achieve desired results
* Manage and assess project risk
* Manage budget and schedule
* Follow established detailed processes and procedures, including Earned Value Management System (EVMS) and our client's Integrated Product Development System (IPDS)
* Identify and engage appropriate technical and business resources needed for successful project execution
* Lead project reviews with customers/stakeholders, including senior IT and business leaders
* Coordinate and maintain program communications
* Document and review lessons learned
*Identify and establish effective internal and external relationships to accomplish project objectives
* Provide technical and analytical guidance to project team
* Active supplier management including alignment of the critical path within an integrated schedule
* Manage relationships with all internal and external suppliers
* Define and manage readiness elements that support achieving business and financial objectives
* Ensure project results are of the highest caliber, meeting technical and behavioral objectives, business case targets, and planned value

Required Skills:
Minimum 8+ years applicable experience and a Bachelors degree or equivalent combination of work experience in IT Project Management plus some schooling/certifications
* Experience working with technical teams to define and implement IT solution architectures, including software development, software configuration and integration, and IT infrastructure implementations
* Experience effectively managing multiple projects simultaneously
* Familiarity with Agile/SAFE, DevOps
* Develop business case justifications and cost/benefit analyses for IT spending and initiatives
* Influence and work across multiple organizations and levels, as well as across multiple geographic regions
* Skill leading and participating in virtual meetings
* Elicit cooperation from a wide variety of sources
* Experience working independently and in a team-oriented, collaborative environment
* Proficient use of Microsoft Office applications (i.e., Project, Visio, Excel, PowerPoint, Word)
* Travel within US possible to support project activities with geographically distributed teams

Desired Skills:
* Experience managing IT projects using our client's IT IPDS
* Formal project management methodologies, including EVMS
* Project Portfolio Management (PPM) tool
* Project Management certification a plus
* Six Sigma certification a plus
 
Job Number: NH48414
Job Location: Billerica, MA
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Jr. Avionics Systems Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.


Duties and Responsibilities:
• Define, plan, and develop complex systems level requirements to support the avionic systems.
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• Interface with suppliers to ensure technical requirements are met to support aircraft development need dates
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule
• Develop targeted system level enhancements to address customer feedback and product improvement initiatives
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems
Qualifications


Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 20 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test


Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required)
• Proficiency in requirements management tools such as DOORS
• Proficiency in PLM Tools such as TeamCenter and SAP
• Ability to handle complex work assignments
• Ability to work independently and within a multi-functional team environment




The Structures Company, LLC is an AA/EOE.
 
Job Number: 296
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lathe CNC Programmer - Aerospace LA - Contract

Description:
CNC Programmer - Aerospace and Defense

Target pay is $40/ hr. but willing to consider higher comp for well qualified candidates.

Ingenium Technologies is helping an aerospace company in Northeast LA find a CNC programmer with MasterCAM and Lathe experience. Contract is expected to go 6-12 months. Full description below.


A large military aerospace contractor is currently seeking a Contract CNC Programmer to solve difficult manufacturing problems and work with members to implement process and product improvements.

Responsibilities will include but not be limited to:

Understanding of applicable automated or semi-automated manufacturing processes and equipment

Proven ability to access programming controls to make logic edits and changes

Implementation of manufacturing processes and/or solid design and implementation of Computer Numeric Controls programming

Interpretation of specifications and participation in hardware disposition

Implementation of manufacturing processes and/or design/training/implementation of processes including setup/programming/training for tooling, fixturing, assembly equipment, and manufacturing aids

Interpretation of specifications and participation in hardware disposition

Programs production equipment using applicable software

Recommends or conceptualizes improvements with tools. May design tools

Creates complex process drawings utilizing applicable software

Maintains rework processes for manufacturing

Builds prototypes and mock ups with preliminary drawings

Required Software: CNC Programming Software, Mastercam, SAP, WISE, PLM



Required Experience:

Minimum 7 years experience in an aerospace manufacturing environment performing CNC programming related tasks.
Able to manufacture fairly complex parts or assemblies with preliminary drawings. Able to operate more advanced test or manufacturing equipment.
Able to interpret fairly complex schematics or drawings and identify mistakes. Basic GD&T knowledge
Proven ability to access programming controls to make logic edits and changes

Required Education:

High School Diploma or equivalent
Position: Contract



Travel: 20% domestic and international required



Compensation: Exempt, Highly Competitive with Benefits



Location: Los Angeles, CA 91355



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 215620
Job Location: Rockford, IL Illinois
Rate: $40/hr.
Per Diem: Possible
Overtime: Possible
Duration: 6-12 Months
Start Date: Now
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: David Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Engineer

Description:
Loads and Dynamics Engineer
• Support loads event simulation model development and validation of loads criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and loads requirements
• Develop airframe design loads, component loads, fatigue spectra, and environmental specification
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain loads databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational loads criteria and requirements for unique vehicles with unconventional configurations
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in external loads and dynamics development
• Experiences in wind-tunnel and flight test aerodynamic and loads model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 and NASTRAN experiences preferred.

The Structures Company is an AA/EOE.
 
Job Number: 260
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Logistics Management Analyst
Location: Fort Worth, TX
Pay Rate: $39.41
Duration: 1 Year
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

Flexible working hours required
SAP - 1+ years experience preferred
 
Job Number: 10490
Job Location: Fort Worth, TX
Rate: 39.41
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163802
1296-1 Logistics Management Analyst
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/29/2019
End Date: 1/28/2020

Job Description:
Execute the efficient flow of military aircraft parts, components and support equipment around the globe within a diverse team environment.
Desired knowledge, skills and expertise:
- Export Licensing, Documentation & Logistics
- EAR/ITAR Jurisdiction Determination,
- Schedule B / Harmonized Tariff System (HTS) classification.
- Federal Trade Regulations (FTR) including AES / ACE Electronic Export Information submittals.
- International Incoterms, exporter of record and importer of record requirements
- Global Trade Services (GTS) and SAP software.
- IATA and DOT Dangerous Goods Regulations
- Customs Clearance Process awareness

**Flexible working hours required

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $38.00 Hourly

Experience
Software Skills SAP No 1
 
Job Number: JE-1296-1
Job Location: Fort Worth, TX
Rate: 38/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable.
• US Person is required
 
Job Number: 10732
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies.

Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications

• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10696
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Location: Windsor Locks, CT
Rate: $36.50/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
-Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is required.
-Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems.
-Desired experience should include working on the manufacturing of components such as, heat exchange's, pumps, fans, & accumulators.
-Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.
-Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
-Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
-Experience with a MRP (Manufacturing Resource Planning) system is desirable. US Person is required
 
Job Number: 10447
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Shift: First
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Required Skills:
1. Must be a U.S. Citizen.
2. Experience with MS Excel and CAD software preferred.
3. Experience with both 2D and 3D engineering.

Education and Experience Requirements:
1. Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
1. Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
12. Support all Safety, Sustainability and Ergonomic Initiatives.
13. Aid in development and maintenance of Business Continuity Plan.
14. Author DRDI/DMT rework instructions to support effective corrective actions.
15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.

Additional Functions:
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 10663
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Preferred Experience in a Manufacturing or Mechanical Environment.
- Should have good communication and customer satisfaction skills.
- Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
- Preferred Manufacturing Planning experience.

Other Requirements:
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 9832
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Level 1

Description:
Manufacturing Engineer Level 1

Windsor Locks, CT
$25/hr
12 month W2 contract
First Shift
*MUST BE A U.S. PERSON OR RESIDENT*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns.

Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
• Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
• Candidate must have 2-5 years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable.
Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
Experience with a MRP (Manufacturing Resource Planning) system is desirable.
 
Job Number: 10605
Job Location: Windsor Locks, CT
Rate: 25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner TX

Description:
Master Planner
Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 4/23/2019
End Date: 4/23/2020

Job Description:
This position supports the Planning Implementation Development and Analysis Functional team in the development and delivery of Program Planning capabilities to Aero Line of Business programs and projects. Responsibilities include the development, deployment, and implementation of processes, training, and tools in support of the Program Planning discipline. This position will be an active participant in the evaluation of program planning/scheduling products and practices, and will be instrumental in the resultant remediation activities upon identification of gaps. One-on-one mentoring of planners, formal process and tools training, and leadership of team meetings are techniques that will be employed by this position in order to develop bench strength among the planning community, and to improve planning work products. Demonstrate strong communication and interpersonal skills to work in a team environment. Possess ability to prepare status reports, metrics and make presentations as required. Must be outgoing, energetic, self-starter and have demonstrated Program Planning and Scheduling hands on experience. Additional responsibilities will be assigned as required.

Highly Desired Skills:
Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned Value Management System (EVMS) Experience, DCMA Health Metrics/Data Driven Metrics Knowledge.

Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position). Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $47.78 Hourly

Soft Skills Ability to meet deadlines Yes 1 6 + Years
Soft Skills Analytical Ability Yes 1 6 + Years
Software Skills MS Excel Advanced Yes 1 6 + Years
Technical Skills Earned Value Analysis Yes 1 6 + Years
 
Job Number: JE-1473-1ATO
Job Location: Fort Worth, TX
Rate: 47.78/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Pro-E / CREO)/Manufacturing

Description:
Requirements:
•Strong proficiency in using PRO-E \ CREO or a comparable CAD software package
•Detailed knowledge of Manufacturing and Assembly procedures
•Knowledge of the Standard Design Process

Candidate must also have the ability to produce and check drawings conforming to ASME Y14.5 and to support, and verify design with standard hand calculations for form, fit, function, and structural strength.

This engineer should be able to prepare reports of results of analysis and experimentation, and the ability to present design content at various design reviews must be evident.

The Engineer will work multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally, they will be responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
•Strong analytical and problem-solving skills
•Pro-Engineer / CREO or equivalent CAD knowledge for model, layout, and drawing creation
•Finite Element Analysis tools (ex. ANSYS, Pro-Mechanica, NASTRAN/PATRAN)
•Able to perform Linear Stress Analysis based on the experience, vibe and shock, fatigue
•Hands on and Service mentality Design for Manufacturability
•Good verbal and written communication skills.
•Excellent team skills.
•Ability to prioritize work independently with little direction while staying on task.

Education:
•Bachelors
 
Job Number: 1910099028
Job Location: Houston, TX
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / MCAD Drafter

Description:
The Candidate must be experienced with Teamcenter and NX Solid Modeling software and have Aerospace Packaging experience.

The candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. These may include utilization of computer aided design applications.

Activities will include mechanical conceptual layout, detailed design, and engineering documentation. The candidate will interface with other engineering groups to insure design requirements are fulfilled.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints. The position will work with cross functional teams to resolve issues.

Responsibilities may include:
• New product development from concept through production.
• Generating detailed solid models and engineering drawings.
• Processing documents through document change system.

Qualifications
• Minimum 8 years mechanical design experience required.
• Related technical degree a plus.
• Minimum 8 years solid modeling experience. Siemens NX11 or Creo a plus.
• Experience with Siemens Teamcenter PLM Software.
• Strong knowledge of GD&T ASME Y14.5.
• A background working on avionics design related experience a plus.
• Strong knowledge of manufacturing processes.
• Familiarity with DO-160 and DO-254 development guidelines a plus.
• Applicant should be highly motivated, with demonstrated leadership and communication skills.
• Close attention to detail required.
• Must be a US citizen or permanent resident.
• Good organization and planning skills required.
• Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
 
Job Number: 1910100012
Job Location: Phoenix, AZ
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer/Drafter

Description:
Location: Phoenix, AZ
Rate: $39.00/HR
Duration: 6 month contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
**** Candidate must be experienced with Teamcenter and NX modeling software and have aerospace packaging experience****

Job Description:
- Mechanical Designer/MCAD Drafter with emphasis on aerospace electronics packaging.
- Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
- Will interface with other engineering groups to insure design requirements are fulfilled.
- The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints.
- The position will work with cross functional teams to resolve issues.

Responsibilities may include:
- Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
- May include utilization of computer aided design applications.
- New product development from concept through production.
- Generate detailed solid models and engineering drawings.
- Processing documents through document change system.

Qualifications
- Minimum 8 years mechanical design experience required.
- H.S. Diploma required.
- Related technical degree a plus.
- Minimum 8 years solid modeling experience.
- Siemens NX11 a plus.
- Experience with Siemens Teamcenter PLM Software.
- Strong knowledge of GD&T ASME Y14.5.
- A background working on avionics design related experience a plus.
- Strong knowledge of manufacturing processes.
- Familiarity with DO-160 and DO-254 development guidelines a plus.
- Applicant should be highly motivated, with demonstrated leadership and communication skills.
- Close attention to detail required.
- Must be a US citizen or permanent resident.
- Good organization and planning skills required.
- Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
 
Job Number: 10668
Job Location: Phoenix, AZ
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer (5+ year experience)

Description:
This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

The Candidate:
• Will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
• Must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
• Must be able to perform cost estimates, work to schedules, and write procedures and policies.
• Must be able to review drawings and concepts and resolve producibility concerns.
• Must provide technical support to the manufacturing facility as well as to the external suppliers.
• Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
• Must be able work well in an integrated product development/ design environment.
• Will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
• Must possess a positive attitude and be able communicate well with staff, IPD teams & management.

The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Required Experience/Qualifications
• Candidate must have 5+ years of experience working on the manufacture of complex mechanical systems.
• Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software.

Desired Experience/Qualifications
• Working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
• Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired.
• Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
• Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
• Experience with an MRP (Manufacturing Resource Planning) system
 
Job Number: 1910100042
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Performs verification and validation of component level requirements to approved processes and tools. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Supports system components'' designs/proposals standards to provide installation and detail documentation. Works with supplier for identification and review of supplier design changes for acceptability and impact. Trains others. Works under general direction.
Skills:
Software:DOORS
Technical Skills:
•Change Control
•Requirements Development
•Supplier Interaction
 
Job Number: 1113-2018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Methods Proc Analy 2

Description:
Methods Proc Analy 2

Location: Renton, WA
Duration: 6 months

Job Description:
Ideal candidate has experience on 737 program and with precedence modeling software (Aurora or similar software.) Must also have had shop floor experience

Conducts analysis of current and future business environment using established guidelines. Develops forecast, acquisition, and utilization plans to optimize resources in support of company initiatives and program business plans under the guidance of experienced analysts. Develops and maintains basic Business System factory definition to be used for manufacturing planning. Contributes to the development of labor hour estimates for new or revised production and tooling work packages under the guidance of experienced analysts. Monitors performance to established labor hour estimates. Under the guidance of experienced analysts, assists in the development of integrated tool and production master schedules by developing tool and position plan/documents, tool downtimes, rate flow plans, #1 flows, and tool sequencing plans to maximize the Assists in the identification and implementation of improvements to processes by analyzing current processes and utilizing established improvement methodologies to maximize the efficiency of equipment and personnel and to support company improvement initiatives. Under guidance of experienced analyst, analyzes changes to approved plans resulting from unplanned events. Assesses the impact of the changes that occur to cost, schedule, resources, and delivery. Develops modifications to existing plans and obtain approval. Participates in negotiations representing Production and Tooling Operations to support schedule commitments or statement of work impacts. Under the guidance of more experienced analysts, develops, implements, maintains, and statuses complex integrated shop operating plans to maximize the efficiency of equipment and personnel and to reduce inventory and meet cost and schedule commitments. Gathers and analyzes shop performance metrics in order to support a recommend plan of action for Production and Tooling Management.

Education / Experience:
Bachelor's degree and typically 3 or more years’ related work experience, a Master’s degree and typically 1 or more years’ related work experience or an equivalent combination of education and experience.

Skill Code: D28-Methods Analysis

Please share updated resume at ravi@iconma.com if interested
 
Job Number: 19-04697
Job Location: Everett/Renton, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Designer ( Mesa , AZ ) 9052089

Description:
NX Designer ( Mesa , AZ ) 9052089
9 Month Contract

Pay Rate: $45-55/hr W2

*Top 3 Skills: GD&T Background, Tolerance Stacking capabilities, proficiency with NX CAD software and TeamCenter.*// Looking for a self-motivated individual who will be ready to hit the ground running.//
*
Job Summary:
The Senior Principal Designer will be assigned projects of varying complexity and scope involving gun systems and related components. The position involves the design and development of electrical and mechanical systems into a variety of vehicle applications. The position requires experience working with both engineering and program teams. In addition, this position requires a person that exhibits a high degree of teamwork, organization, technical skill and versatility.//
*
Job Responsibilities:
Develops detailed design drawings and related specifications of mechanical equipment, according to engineering sketches and design proposal specifications: Analyzes engineering sketches, specifications, and related data and drawings to determine design factors, such as size, shape, and arrangement of parts. Sketches rough layout of part or machine and computes angles, weights, surface areas, dimensions, radii, clearances, tolerances, leverages, and location of holes. Drafts detailed multi-view drawings of assemblies and subassemblies, including specifications for gear ratios, bearing loads, and direction of moving parts, using engineering data and standard references. Applicant must have extensive experience utilizing geometric dimensioning and tolerance of engineering products.//
 
Job Number: 9052089
Job Location: Mesa, AZ
Rate: 50
Per Diem: yes
Overtime: yes
Duration: 9 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Drafter

Description:
Electrical Designer/CAD Drafter with emphasis on aerospace electronics circuits. Activities will include conceptual layout, detailed design, and engineering documentation of complex multi-layer analog, digital, mixed signal, RF, high speed, and high power PCB layout designs. Will interface with other engineering groups to insure design requirements are fulfilled.

The selected candidate will work as a member of the Electronic Systems Center, and will be part of design, development and momentum support on aerospace electronic solutions.

The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the electrical design constraints. The position will work with cross functional teams to resolve issues. In addition, some travel to customer and supplier facilities may be required.

Responsibilities may include:
* Interprets electrical design requirements and creates original board layouts, detailed drawings, schematics, and illustrations
* Provides for compliance with items such as specifications, tolerances and safety factors when performing highly specialized electrical designs
* Performs specialized electrical design computations and analysis
* Prepare diagrams and PCB design schedule estimations.
* Coordinates electrical design work with Electrical Design Engineers
* Collects background information and helps write specifications and electrical design practices
* New product development from concept through production
* Processing documents through document change system

Additional Job Details:
Qualifications Required
* IPC Certified Interconnect Designer (CID), as a minimum.
* Minimum 5 years experience with Cadence v16.6 - v17.2 Concept HDL schematic capture and Allegro PCB layout tool sets.
* Thorough knowledge of IPC standards regarding PCB design, fabrication and assembly.
* Thorough knowledge of Cadence Library manager.
* Thorough knowledge of implementing design constraints and the use of constraints within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
* Full understanding of the data structure of a typical database (design) within Cadence Concept HDL schematic capture and Allegro PCB layout tool set.
* Experienced in implementing manufacturers data as well as PCB and CCA suppliers DFM recommended suggestions.
* Full understanding of PCB, FAB and CCA manufacturing processes.
* Applicant should be highly motivated, with demonstrated leadership and communication skills and pays close attention to detail. * Must be a US person.
Preferred:
* IPC Advanced Certified Interconnect Designer (CID+).
* Experience with Siemens Teamcenter PLM Software
. * Knowledge of GD&T ASME Y14.5.
* A background working on avionics design related experience a plus
. * Knowledge of and the use of Hierarchal schematic blocks a plus.
* Experience with Mentor Graphics DxDesigner-Expedition Enterprise flow a plus.
* Experience with Microsoft Visio a plus.
 
Job Number: 48658
Job Location: Phoenix, Az
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Planner Senior / BS degree required CA

Description:
8185 Planner Senior
Irvine, CA


**This person would be responsible for order processing, forecasting, reporting and provisioning parts at each of our global pools. This is not a typical CRC position. We are looking for someone with planning and/or aerospace experience. This could lead to a full-time position.

Ensures performance to the master production schedule to achieve division objectives for customer service, inventory levels, and configuration management. Plans, prepares, issues, and controls moderately complex and/or diverse production schedules and material requirements to ensure a controlled flow of approve.

1. Bachelors degree (BA) in Business Administration or a related field, or an equivalent combination of education and experience which has provided both theoretical and practical knowledge in the field.
2. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience.
3. APICS certificate preferred.
4. Knowledge of manufacturing resources planning theories, principles, and industry practices.
5. Proficient in standard business application software, manufacturing resource planning systems, and interface operations.
6. Ability to effectively apply continuous improvement methods to the planning function (e.g. pull systems, process mapping, JIT) and related areas.
7. Knowledge of legal, regulatory and internal policy requirements related to production control.
8. Ability to work on a variety of problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact.
9. Ability to work within general work objectives regarding projects and team goals.
10. Ability to read, analyze, and interpret financial reports and policies and recommend changes to procedures.
11. Ability to effectively communicate and present information to team members, team leaders, and top management.
12. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
13. Ability to define problems, collect data, establish facts, and draw valid conclusions.
14. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities, materials timed to meet production requirements.
 
Job Number: JK-8185
Job Location: Irvine, CA
Rate: 30-40/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Software 3 - Clearance / URGENT FL

Description:
Principal Engineer Software 3 (Job Number: 19007337)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Jun 10, 2019

Target End Date: Jun 5, 2020

Requested Hourly Rate: 55.00

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Candidates NEEDED ASAP

The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR


Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience


Experience developing software / writing code in C/C++ or Ada

Experience with Linux



Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering


Strong Problem Solving Skills


Experience in Software Test


Familiarity with Atlassian tool suite and tools like git and Confluence


Familiarity with Agile software development process


DOORS


Eclipse or other integrated development environment (IDE)


Knowledge of Linux systems with basic commands


Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)


Experience with OpenGL
 
Job Number: JK-1748S
Job Location: Melbourne, FL
Rate: 55/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Full-Stack Software Development Analyst CA

Description:
Principal Full-Stack Software Development Analyst (Job Number: 19003641)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Feb 18, 2019

Target End Date: Feb 14, 2020

Pay rate: $46.00 - $53.00

Location: El Segundo, CA

Work schedule: 9/80

Duration of assignment: Up to 1 year

Searching for a full-stack business application developer well versed in .Net, MVC5, SQL, SSIS, SSRS, and/or SharePoint 2013. Additional key skills include:

- Working independently with little oversight.
- Ability to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
- Ability to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.
- Candidate needs to cooperate with teammates on best practices and possible re-use of applications.
- Ideal applicant will be enthusiastic about process improvement, efficiency, excellent customer service, and working with different teams from all functions.
- Candidate should be able to juggle multiple assignments and manage changing priorities.
- Strong project management and communications skills are highly desired.


Basic Qualifications:

•Bachelor's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
•Minimum of 5 years experience with a Bachelor's Degree (3 years with a Master's degree and 0 with a PhD.) with programming in C#, ASP.NET MVC and MS SQL Server (RDMS, SSIS, SSRS), Web Services and Javascript related technologies
•Active Final DoD SECRET clearance. Interim not qualified.


Preferred Qualifications:

•Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
•Experienced in machine learning, advanced analytics, and data visualization, Tableau dashboard development
•Experienced in SharePoint 2013 Development
•CompTIA Security+ certification
•Strong understanding of product quality and statistical process control
 
Job Number: MB-1731S
Job Location: El Segundo, CA
Rate: 53/hr max
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 - Clearance FL

Description:
1740 Principal Software Engineer 3 (Job Number: 19006470)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: May 6, 2019

Target End Date: May 1, 2020
Requested Hourly Rate: 50.00

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:

• Full Lifecycle design, implementation, and unit testing of software

• Work with various sub teams to integrate functionality with other IPTs

• Actively participate in code reviews

• Develop SW products from all phases of SW life cycle.

Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
Experience developing software / writing code in C/C++ or Ada
Experience with Linux

Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
Strong Problem Solving Skills
Experience in Software Test
Familiarity with Atlassian tool suite and tools like git and Confluence
Familiarity with Agile software development process
DOORS
Eclipse or other integrated development environment (IDE)
Knowledge of Linux systems with basic commands
Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
Experience with OpenGL
Length of C/L = 12 months
 
Job Number: MB-1740S
Job Location: Melbourne, FL
Rate: 50/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Software Engineer 3 FL

Description:
Principal Software Engineer 3 (Job Number: 18026677, 18026687, 18026691, 18026697)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Mar 25, 2019

Target End Date: Mar 20, 2020

Pay Rate: $50/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year


The Software Engineer will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.


Basic Qualifications:

Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 5 years of software engineering experience OR
Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 3 years of software engineering experience
Experience developing software / writing code in C/C++ or Ada
Experience with Linux




Preferred Qualifications:

Bachelor’s or Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
Strong Problem Solving Skills
Experience in Software Test
Familiarity with Atlassian tool suite and tools like git and Confluence
Familiarity with Agile software development process


DOORS
Eclipse or other integrated development environment (IDE)
Knowledge of Linux systems with basic commands
Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
Experience with OpenGL
 
Job Number: MB-1725S
Job Location: Melbourne, FL
Rate: 48-50/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Analyst

Description:
Program Analyst

Houston, TX
$64.48/hr
2 year contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Analyst supporting Space Systems programs and other sites based on need, reporting to the Segment Finance / Program Planning and Control organization. Responsibilities include application of company's Earned Value Procedure and implementation of an Earned Value Management System (EVMS) providing for the assessment of program performance as a viable program management tool.

The analyst will assist the program PM/Business Manager in the early identification of potential cost/schedule issues, providing the Program Office and Integrated Product Team leads (IPTs)/Control Account Managers (CAMs) the means for corrective action and risk mitigation. The candidate will provide structured program performance information while managing the performance measurement baseline.

Guidance and support will be provided to IPTs and CAMs utilizing EV methodologies and critical analysis to connect data with trends and underlying drivers. Ability to implement and maintain assigned budgets, including applicable earned value methods during initiating and rolling wave periods. The analyst will provide IPTs/CAMs with results of actual costs in relation to estimates/project performance.

Additional efforts include monthly performance, schedule, and estimate-to-complete (ETC)/estimate-at-complete (EAC) updates, working with IPTs/CAMs to identify cost/schedule variances and determine impacts to the program. The candidate will utilize knowledge of EVM techniques in order to manage changes to the program baseline. Month end reporting and associated deliverables are critical to the position and requires the ability to produce CPR and 533 products. Applicant may also be required to provide for proposal support which consists of providing BOEs for EV estimating with accuracy and conformance to proposal time lines and EVMS policy.

Education:
Minimum Bachelor’s Degree in Accounting or Engineering.

Experience/Qualifications:
Candidate must possess an advanced knowledge of Earned Value Management standards, methodologies, and have a background in Work Breakdown Structures, program scheduling, and project budgeting.
EVMS experience is required.
Candidate must also be a proficient user in Excel, Access, MS Project, EV software and have familiarity with SAP or other ERP/financial systems including standard costs and strategy queries. Strong interpersonal skills with the ability to work in a multi-functional team environment are required.
Proficiency in Tiger is also a plus, experience with SAP and MS Project Server is desired.

Additional Comments: Candidate must possess strong business acumen with proper understanding of program/project contracts, fee, rates, and operating plans. Experience with 533 and CPR is essential.
 
Job Number: 10545
Job Location: Houston, TX
Rate: 64.48
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Analyst

Description:
Program Analyst

Windsor Locks, CT and Houston, TX
$64.48/hr
2 year contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Analyst supporting Space Systems programs and other sites based on need, reporting to the Segment Finance / Program Planning and Control organization. Responsibilities include application of company's Earned Value Procedure and implementation of an Earned Value Management System (EVMS) providing for the assessment of program performance as a viable program management tool.

The analyst will assist the program PM/Business Manager in the early identification of potential cost/schedule issues, providing the Program Office and Integrated Product Team leads (IPTs)/Control Account Managers (CAMs) the means for corrective action and risk mitigation. The candidate will provide structured program performance information while managing the performance measurement baseline.

Guidance and support will be provided to IPTs and CAMs utilizing EV methodologies and critical analysis to connect data with trends and underlying drivers. Ability to implement and maintain assigned budgets, including applicable earned value methods during initiating and rolling wave periods. The analyst will provide IPTs/CAMs with results of actual costs in relation to estimates/project performance.

Additional efforts include monthly performance, schedule, and estimate-to-complete (ETC)/estimate-at-complete (EAC) updates, working with IPTs/CAMs to identify cost/schedule variances and determine impacts to the program. The candidate will utilize knowledge of EVM techniques in order to manage changes to the program baseline. Month end reporting and associated deliverables are critical to the position and requires the ability to produce CPR and 533 products. Applicant may also be required to provide for proposal support which consists of providing BOEs for EV estimating with accuracy and conformance to proposal time lines and EVMS policy.

Education:
Minimum Bachelor’s Degree in Accounting or Engineering.

Experience/Qualifications:
Candidate must possess an advanced knowledge of Earned Value Management standards, methodologies, and have a background in Work Breakdown Structures, program scheduling, and project budgeting.
EVMS experience is required.
Candidate must also be a proficient user in Excel, Access, MS Project, EV software and have familiarity with SAP or other ERP/financial systems including standard costs and strategy queries. Strong interpersonal skills with the ability to work in a multi-functional team environment are required.
Proficiency in Tiger is also a plus, experience with SAP and MS Project Server is desired.

Additional Comments: Candidate must possess strong business acumen with proper understanding of program/project contracts, fee, rates, and operating plans. Experience with 533 and CPR is essential.
 
Job Number: 10557
Job Location: Windsor Locks, CT
Rate: 64.48
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Description:
Applies extensive knowledge of principles, theories, concepts and industry practices to plan, direct, and coordinate the engineering design, integration, analysis and certification of company products and processes for manufacturing of complete aircraft parts, components, subsystems and complete systems for operational aircraft.


Requirements:
• Catia V5
• Project Engineering
• Multi-Function Coordination
• New Product Definition
• Design Integration (10+ Years)
• Configuration Management
• PMP is a plus
• SmarTeam is a plus
• Background in aircraft design and project coordination is required
• Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
• BSME preferred


The Structures Company is an AA/EOE.
 
Job Number: 261
Job Location: OK
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager

Description:
Project Manager

Riverside, CA
$33.38/hr
6 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manage mid level complexity engineering management and project management for technical process improvement projects. Responsibilities include developing productivity tools, managing documentation, tracking schedules.

Job Description:
This site position will play a key role in the implementation of the Manufacturing Execution System (MES) and Overall Equipment Effectiveness (OEE) systems. The candidate must have knowledge of discrete manufacturing in an automated environment, with a demonstrated track record of proficiency with MES/OEE and continuous improvement/process engineering.

Major Duties & Responsibilities:
• Support the development and training of the manufacturing OEE strategy for the plant and each of the Value Streams utilizing OEE framework to capture and manage execution of the strategic actions.
• Support plant-wide framework for OEE and SMART Manufacturing implementation and facilitate the execution of this strategy.
• Manage the execution and maintenance of Visual Management tools including OEE dashboards, OEE reports(Tableau).
• Maintain, compile, analyze, and report metrics of improvement projects from Machine Data Collection (CIMCO) captures.
• Coordinate, assist, and deliver team-based OEE and SMART Factory training to Value Stream leadership and staff including operators.
• Identify and implement OEE activities on the shop floor to produce bottom line savings in coordination with Value Stream MEs and CIs.
• Coordinate with resource departments including Corporate Project Management and Corporate IT on issues relating to OEE implementation.
• Assist in the development of programs/systems/processes and equipment upgrades that improve equipment reliability/OEE (e.g., preventive and predictive maintenance systems, techniques and schedules, material recommendations, troubleshooting guides, repair plans, training, spare parts, etc.).
• Interacting with multiple departments including but not limited to Corporate IT, Planning, Plant Production Teams, and MES/OEE Vendors.
• Provide “On-call” rotating support for MES/OEE systems to assure 24/7 manufacturing operations.
• Training super and end users on functionality and process changes as they relate to MES/OEE.
• Trouble shooting daily operational system issues to define root cause, working in collaboration with business partner to create temporary/permanent solutions
• Organize, schedule and run meetings to coordinate on-site commissioning, identifying opportunities and system needs
• Monitor process and technology and provide insights into overall status

Position Requirements:
• Successful candidate will possess a minimum of a Bachelor’s degree in an Engineering/Computer Technology field with at least 3 years of experience working preferably in the aerospace, automotive, or pharmaceutical industries.
• Experience with Overall Equipment Effectiveness (OEE) and MES implementation highly desired.
• Knowledge and experience with MES technologies. Solumina, and SAP would be preferable.
• Experience in rolling out continuous improvement projects including OEE, SMED, TPM, Six Sigma
• Excellent problem solver with the ability to keep many driving factors and requirements in focus
• Strong communication and documentation skills, ability to communicate and interact at various levels of organization.
• Installation and configuration standard as well as an understanding of project management and following project phases including requirements definition, detailed design generation, software configuration, system integration and qualification testing.
• Knowledge of control systems is desirable.
• Demonstrated leadership skills and experience working in diverse, multi-disciplined work groups.
• Experience and/or substantial understanding of process control principles and common system vendors’ available products.
• Excellent written and communication skill are required.

-Bachelors degree required
 
Job Number: 10697
Job Location: Riverside, CA
Rate: 33.38
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SENIOR ENGINEER

Description:
Senior Engineer



Summary: Working with minimal supervision this individual will be responsible for the design and development of environmental control system products and / or systems for aerospace applications. May work directly with customers and provide both technical and project leadership to internal and external resources.



Essential Duties and Responsibilities include the following:


  • Performs engineering assignments with limited supervision.

  • Assesses customer requirements and develops designs, or provide design direction, to meet requirements.

  • Prepare program plan and effectively identify and manage program risks.

  • Analyze problems and makes decisions on proper action to be taken.

  • Responsible for completion and accuracy of engineering documentation.

  • Prepares and presents design data in support of internal and Customer design reviews.

  • Support DFX (Design for Cost, Manufacturability, Reliability, etc.) efforts.

  • Prepares Development and Qualification Test Plans, Procedures and Test Reports.

  • Monitors and controls program cost and schedule.

  • Supports existing products.

  • Makes recommendations for design, cost, or process improvements including substantiating strategy.

  • Provides technical direction and advice to Business Development, Manufacturing and Quality organizations.

  • Performs assignments broad in nature requiring substantial ingenuity and originality usually acquired through industry experience. These assignments may involve:

  • Sophisticated product and technology development.

  • Rigid timetables and short lead schedules

  • Extensive planning and interaction with many support groups and departments.

  • Complex report writing and detailed testing for customer or regulatory approval.

  • Provides leadership to support personnel and less experienced engineering team members

  • Assists in planning and coordination with support groups.

  • Reviews project status, makes recommendations where necessary and instructs in details unique to industry.

  • May perform supervisory duties (train, mentor, evaluate, etc.) for departmental employees on specific tasks or projects.

  • Assists Business Development Department in proposal preparation and customer presentations; interacts with customers and suppliers on technical and program matters.

  • Communicates status accurately and regularly to Management, recommending solutions for problems encountered.

  • Assists Manager in departmental planning and operations.


QUALIFICATIONS


  • B.S. Degree in Engineering

  • 7 years' experience in design, development, qualification and production support of aerospace components.

  • Specific experience in aircraft environmental controls systems and components is highly desirable.

  • Excellent report-writing skills, presentation and customer interface skills.

  • Strong knowledge of CAD design and analysis tools.

  • Proficient in the use of MS Office software, experience with MS Project a plus.

  • Knowledge and experience of DO-160 / MIL-STD-810 requirements




Travel: Periodic travel required to support customer onsite meetings and reviews, both domestic and international.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-01294
Job Location: Seminole, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-01-10 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Engineer

Description:
Our client is looking for a Safety Engineer to work in Grand Prairie, Texas! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Employ safety analysis techniques which will be performed on the engineering product.
* Develop System Safety for environmental compliance, prohibited materials, hazardous materials management, and pollution prevention in accordance with MIL-STD-882.
* Develop, deliver and update System Safety Analysis and Risk Assessment, and Hazard Tracking database Flow down of the System Safety requirements to suppliers and audit/review of the supplier's analysis is also required.
* Independently analyzes and recommends safety features and controls for system design, software, training and procedures to mitigate or eliminate hazards.
* Perform and support the development of safety documentation to support customer and contract requirements Support the development of integrated system hazard analyses.
* Perform software safety tasks and activities associated with the requirements of AR 385-17. Work with systems and software engineering on architecture, Use Cases and software safety analyses.
* Ensure hardware and software system safety requirements are identified and documented in appropriate plans, processes and procedures.
* Assure the program defines and collects evidence in meeting established software safety requirements (including identification and execution/oversight of Level of Rigor testing)
* Prepare and deliver presentations and participates in safety review meetings, system design meetings, program engineering review and change board meetings
* Ensure hazard controls are properly implemented and verified.
* Participate in the development of testing activities to assure safety requirements are met
* Review and provide input to Systems Engineering, Design and Software documentation consistent with project phase to include requirements development, design, development, verification, test methods and performance verification Review specifications, technical documentation, and changes to those documents for impacts to system safety. The results of these analyses will be documented in technical reports.
* Develop System Safety for environmental compliance, prohibited materials, hazardous materials management, and pollution prevention in accordance with MIL-STD-882.
* Plan, host and support System Safety working groups to validate the system’s design to meet requirements Work closely with customer to develop Safety Cases, collaborates hazard mitigations and residual risk and obtain Safety Releases/Certifications.
* Work closely with Reliability, Software, Test and Design engineering.
* Create, update, and maintain a Hazard Tracking System and System Safety reports and deliverables for the customer Review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB).
* Will spend majority of time working in a team environment, providing inputs to engineers, performing analyses, and writing reports.
* There may be some travel.

Mandatory Qualifications and Experience:
* Strong technical background.
* Experience conducting System Safety efforts, testing and verification in compliance with MIL-STD-882 or equivalent.
* Knowledge of Safety Engineering design practices.
* Ability to manage subcontractors in Safety field of expertise.
* Proficient with Microsoft Office.
* Strong interpersonal skills and an ability to build effective working relationships are a must.
* Must have excellent oral and written communication skills, technical writing experience, and an ability to perform oral presentations in front of large groups.
* Must be willing to work overtime and travel as needed to support program requirements.
* Will need to have ability to obtain clearance once hired

Desired Qualifications and Experience:
* Active Secret clearance.
* Mechanical or Electrical Engineering degree.
* Vehicle and/or Weapons familiarity.
* Experience implementing a software safety program in accordance with AR 385-17 or equivalent.
* Experience in preparing software system safety documentation and presenting safety case to the SSSTRP or equivalent safety boards is considered a strong plus.
* Familiar with software engineering analysis, assessment and documentation tools.
* Knowledge of Human Factors and Systems Engineering is considered a strong plus.
* Reliability and Maintainability engineering knowledge.
* Military experience. Hazardous Materials Management knowledge.
* Experience supporting System Safety Working Groups.
* Experience supporting Government conducted tests and providing Safety analysis of test incidents.
* Hardware/Software fault insertion design and test experience.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 130188
Job Location: Grand Prairie, TX
Duration: 9 months
Start Date: 05/13/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Engineer

Description:
Safety Engineer, Level 3
Location: Orlando, FL (32819)
12+ month contract

The ideal candidate will:

Review product systems, associated support equipment and facilities, functional specifications and operations, and establishes safety requirements for assigned systems.
Independently analyze and recommend safety criteria in system design, equipment and procedures to control or eliminate hazards.
Develop safety documents as required to support customer and test/operational range requirements.
Perform audits of operational areas and reports effectiveness of system safety program.
Participate in accident investigations involving damage to products or related facilities and assists in identification of causes and corrective actions.
Evaluate the interrelationship of system safety requirements and other aspects of concept design and development requirements to ensure the most cost effective program.
Will support MIL-STD-882 DoD System Safety Program for a Missile weapons system.

Primary responsibilities include:
• Collaboration with team mates leading the safety engineering activity.
• Analysis and evaluation of subsystem designs for safety compliance.
• Development of System Safety Program Plans (SSPP) & Hazardous Materials Management Plans (HMMP).
• Performance of and/or support to Hazard analyses such as System Hazard Analysis (SHA), Operating & Support Hazard Analysis (O&SHA), Preliminary Hazard Analysis (PHA), Fault Tree Analysis (FTA), Functional Hazard Analysis (FHA) bent pin analysis/energy trace, Safety Assessment Reports (SAR), and Subsystem Hazard Analysis (SSHA).
• Conduct of safety check lists and inspections.
• Support to design & test readiness reviews and safety working group meetings.
• Preparation of data packages and briefing material for Customer System Safety Review Boards.
• Identification and maintenance of Critical Items List.

Skill/Experience/Education:
System Safety with safety requirements/flow-down requirements and safety hardware/software hazard analysis experience using MIL-STD-882.
• Demonstrated experience in performing system safety analyses (e.g. System Hazard Analysis (SHA), Operating & Support Hazard Analysis (O&SHA), Preliminary Hazard Analysis (PHA), Fault Tree Analysis (FTA), Threat Hazard Assessment (THA), bent pin analysis/energy trace, & Flight Test Safety Assessment Reports (SAR)).
• Ability to obtain a Secret security clearance.
• Good written and oral communication skills.
• Possess strong computer skills, including in-depth knowledge of MS Office software.
• Ability to present findings to customers and management.
• Strong problem solving skills.


Desired:
Missile related Systems Safety experience.
• Demonstrated experience in developing and sustaining System Safety Program Plans.
• Demonstrated knowledge, skill and experience in performing Software Safety analysis per AMCOM 385-17 and AOP 52.
• Experience preparing for U.S Government Safety Review Boards (develop technical data package & presentation).
• Qualified as a Certified Safety Professional (CSP).
• Active Secret security clearance.
• Self-starter capable of performing assigned tasks with very little or no direction; interacts well with others.
• Good written and oral communication skills; experience presenting findings to customers and management.
• Analytical thinker with a demonstrated ability of solving complex problems which require ingenuity and innovation.
• Experience working in a matrix organization; ability to work with cross functional teams.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56191
Job Location: Orlando, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Computer Systems Analyst 4 FL

Description:
Senior Principal Computer Systems Analyst 4 (Job Number: 19006898)

Number of Openings: 1

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Mar 27, 2020

Title: Computer Systems Analyst 4

Rate: $60/hr - Pay rate dependent on location and experience

Location: Candidates can be located anywhere in the Continental US (not Alaska or Hawaii) Will report to manager in Melbourne, FL location

Positions: 1

Duration: 12 Months

Shift: 1st Shift - 9/80

Contract Labor opening for a Computer Systems Analyst 4.

Essential Functions:

•Develops computer systems specifications that address business requirements and that fit with the companies system architecture standards.
•Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities.
•Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.
•Manages all aspects of ongoing projects and serves as liaison between various stakeholders.
•Reviews status of projects and budgets; manages schedules and prepares status reports.
•Assesses project issues and develops resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Individual will be responsible for managing large and small scale projects for programs and functional homeroom.


Basic Qualifications:

•A minimum education of a Bachelor's Degree in s STEM discipline (Science, Technology, Engineering or Mathematics) A minimum of 9 years’ experience with a Bachelor's Degree (7 years with a Master's degree and 4 with a PhD.) in C#, MS Visual Studio, ASP.NET MVC, JavaScript , AJAX, XML, Web Services and related technologies, T-SQL and DTS packages for MS SQL Server, MS VBA, SSRS.
•Working knowledge of Python and ShinyR. Experienced in machine learning, advanced analytics, and data visualization.
•Candidate must be able to receive requirements at a high level and derive lower level requirements by working directly with internal customers turning complex processes into user-friendly tools.
•Candidate must be able to perform all phases of the development lifecycle: initial requirements gathering, architecture design, development, testing, and training.

Preferred Qualifications:

•A Master's Degree in a STEM discipline (Science, Technology, Engineering or Mathematics)
•Strong understanding of product quality and statistical process control.
•6-7 years of experience working with statistical process control.
•Strong project management and communications skills are highly desired.
 
Job Number: MB-1744ATO
Job Location: Melbourne, FL
Rate: 60/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Candidate must have an active DoD Secret or Top Secret clearance with an investigation within the last 5 years; position requires candidate to be cleared to a special access program (SAP).

Experience in building real-time, embedded avionics/vehicle management systems. The ideal candidate has experience decomposing high-level air system requirements into detailed avionics subsystem and software requirements specifications (SRS). The candidate should also have experience developing avionics system architectures and using model-based system engineering tools (e.g. Rhapsody, Rational) to document them. The candidate should be proficient with developing safety-critical components in C and/or C++ in a Linux environment, writing automated unit tests, and have experience integrating software components in a System Integration Lab (SIL). Experience working on an Agile team is desired.
 
Job Number: 1465-1
Job Location: CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Palmdale, CA
Rate: $105.00/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Our client is looking for a software engineer with 10+ years of experience in building real-time, embedded avionics/vehicle management systems.
- The ideal candidate has experience decomposing high-level air system requirements into detailed avionics subsystem and software requirements specifications (SRS).
- The candidate should also have experience developing avionics system architectures and using model-based system engineering tools (e.g. Rhapsody, Rational) to document them.
- The candidate should be proficient with developing safety-critical components in C and/or C++ in a Linux environment, writing automated unit tests, and have experience integrating software components in a System Integration Lab (SIL).
- Experience working on an Agile team is desired.
- Candidate must possess excellent oral and written communication skills, be able to guide and mentor junior engineers, apply extensive technical expertise, has full knowledge of other related disciplines, and work without appreciable direction.
- Candidate must have an active DoD Secret or Top Secret clearance with an investigation within the last 5 years; position requires candidate to be cleared to a special access program (SAP).

Education:
Level 4: BS+11 YRS or MS+9 YRS
 
Job Number: 10790
Job Location: Palmdale, CA
Rate: $105.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Clearance with full-scope poly

C/C++, C#
.NET framework, Subversion
Object-Oriented Principles and Design
 
Job Number: 46264
Job Location: MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Active Secret

Required Skills:
* Must have practical experience using C/C++language
* 10+ years of experience in an embedded setting
* Has developed software executing on embedded RTOSs (such as VxWorks or Integrity.)
* Must have experience in integration and test with embedded processors.
* Excellent interpersonal, communication skills and strong team-player.
* Minimum 8 years of related technical individual contributor experience in large team software engineering development
* SCI with in-scope (5yr) SSBI
Desired Skills:
* Experience with Model Based Software Development
* Experience with Interfaces: SpaceWire
* Experience with software implementation of timing and controls
* Understanding of standard system engineering design artifacts such as Use Cases
* Experience with Built in Test (BIT) implementation
* Experience with tools such as RHAPSODY, JIRA, VectorCast, and GoogleTest
* Experience with Agile-Scrum Methodology
* Understanding of software development best practices and processes
* Knowledge of MS Office or other presentation tools
 
Job Number: 48641
Job Location: Los Angeles, Ca
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Primary Responsibilities
Executing new product introduction, value engineering, and production support projects
Establishes software design requirements traceability, flow down requirements, development of code and test cases.
Hands on debugging of code during integration and lab testing.
Developing complex sub-system trade studies, algorithms, and error budgets.
Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management. Proficient with C programming language, and embedded systems in a lab environment. Experience with Microprocessors, Microcontrollers, and/or DSPs. Excellent written and verbal skills. Good computer skills with ability to learn new programs/software. Ability to work under pressure and within time constraints. Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications: 6+ years experience in software development. Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA. Model Based Development, using SysML, Simulink or SCADE. Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A. Knowledge and use of ADA, Assembly, Perl, C#. Software Verification including, test procedure development, robustness testing and debug. Experience with software configuration management and problem reporting tools
 
Job Number: 3130
Job Location: Phoenix, AZ
Rate: $71.00
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: UNIVERSAL STAFFING SERVICES
Attention: Nancy Boyce
Address: 628 HEBRON AVE STE 214
City, State: GLASTONBURY, CT 06033
Phone: 860/527-8135
Website: www.ussjobs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications.

The role will involve:
• requirements definition using DOORS or structured modelling,
• detailed design,
• code implementation using embedded C,
• validation of requirements and
• verification of implementation.
• managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change

Preferred Qualifications
• 6+ years’ experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 1910103342
Job Location: Phoenix, AZ
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Phoenix, AZ
$67/hr
6 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
• Executing new product introduction, value engineering, and production support projects
• Establishes software design requirements traceability, flow down requirements, development of code and test cases.
• Hands on debugging of code during integration and lab testing.
• Developing complex sub-system trade studies, algorithms, and error budgets.
• Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Qualifications
• Proficient with C programming language, and embedded systems in a lab environment.
• Experience with Microprocessors, Microcontrollers, and/or DSPs
• Excellent written and verbal skills
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
• 6+ years experience in software development
• Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Model Based Development, using SysML, Simulink or SCADE
• Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
• Knowledge and use of ADA, Assembly, Perl, C#
• Software Verification including, test procedure development, robustness testing and debug
• Experience with software configuration management and problem reporting tools
 
Job Number: 10731
Job Location: Phoenix, AZ
Rate: 67.00
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Windsor Locks, CT
Rate: $68.00/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages high complexity projects in multidisciplinary research and collaboration with equipment designers and/or hardware engineers in the design, development, and utilization of electronic data processing systems software, and performs software modeling and verification.


Education:
- Bachelor's Degree required.
- 10+ years of software engineering experience required.
 
Job Number: 10348
Job Location: Windsor Locks, CT
Rate: $68.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance

Description:
Minimum of 8+ years of experience.
Built in Test (BIT) application developer with experience designing and developing embedded SW in C++.
Signal Processing (SP) a plus.
Hardware and Software integration experience required.
 
Job Number: 48639
Job Location: El Segundo, CA
Rate: 100.00
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: David Beaver
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance CA

Description:
Software Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 4/29/2019
End Date: 7/30/2020

Job Description:
The Skunk Works ® is looking for a software engineer with 10+ years of experience in building real-time, embedded avionics/vehicle management systems. The ideal candidate has experience decomposing high-level air system requirements into detailed avionics subsystem and software requirements specifications (SRS). The candidate should also have experience developing avionics system architectures and using model-based system engineering tools (e.g. Rhapsody, Rational) to document them. The candidate should be proficient with developing safety-critical components in C and/or C++ in a Linux environment, writing automated unit tests, and have experience integrating software components in a System Integration Lab (SIL). Experience working on an Agile team is desired.

Candidate must possess excellent oral and written communication skills, be able to guide and mentor junior engineers, apply extensive technical expertise, has full knowledge of other related disciplines, and work without appreciable direction.


Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $80.00 Hourly
 
Job Number: JE-1465-1S5
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: no
Duration: 5 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance CA

Description:
1435-1 Software Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/1/2019
End Date: 10/4/2019

Job Description:
Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test. Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.

Perform other duties as assigned.

Manager will consider both 2 and 3 level candidates.

Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $75.00 Hourly

Skills:
Embedded Systems Yes 2 4 - 6 Years

C++ - Advanced Level Yes 1 6 + Years
 
Job Number: JE-1435-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
163931
1313-1 Software Engineer
Work Location: Marietta, GA
Status: Open

Qty: 5
Desired Start Date: 1/16/2019
End Date: 3/8/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues in a fast-paced, multi-disciplined research and development environment.
Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test.
Some requirements analysis, system verification and validation may also be required.

Region: Marietta, GA
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $69.00 Hourly

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1313-1S5
Job Location: Marietta, GA
Rate: 69/hr max
Per Diem: no
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
163932
1312-1 Software Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 10
Desired Start Date: 2/4/2019
End Date: 3/27/2020

Job Description:
Individual will perform software development and integration for distributed, real-time simulation systems that include a mix of aircraft software and simulation software. These systems represent an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. n a fast-paced, multi-disciplined research and development environment.

Responsibilities include:
(1) real-time simulation software design and development and
(2) software integration and test. Some requirements analysis, system verification and validation may also be required.

Region: Fort Worth, TX
Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $65.74 Hourly OT40

Skills:
Software Skills ADA No 6 1 - 2 Years
Software Skills C++ - Advanced Level No 1 6 + Years
Software Skills Linux No 4 4 - 6 Years
Software Skills Modeling No 8 4 - 6 Years
Technical Skills OO Design No 7 6 + Years
Technical Skills OO Programming No 2 6 + Years
Technical Skills Real Time No 5 4 - 6 Years
Technical Skills Simulation No 3 4 - 6 Years
 
Job Number: JE-1312-1S5
Job Location: Fort Worth, TX
Rate: 65.74/hr max
Per Diem: no
Duration: 13 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Level 2/3

Description:
Software Engineer - Level 2/3

Palmdale, CA
$60/hr - $95/hr
6 month W2 contract
First Shift
*MUST HAVE AN ACTIVE/CURRENT SECRET CLEARANCE*

Description:
Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test. Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.

Perform other duties as assigned.

Must be a US Citizen. This position is located at a facility that requires special access and an interim Secret clearance to start.

Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Imbedded and C++ required
 
Job Number: 10630
Job Location: Palmdale, CA
Rate: 60-95
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / C++, Embedded, HWILL, AGILE, experience developing/writing COMM/NAV Avionics Software - Clearance CA

Description:
1447-1 Software Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 1
Desired Start Date: 4/30/2019
End Date: 1/27/2020

Job Description:
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating software. Develop, analyze, integrate, and test embedded software for the Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Modeling and simulation efforts. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Good presentation skills.

Required skills - C++, Embedded, HWILL, AGILE, experience developing/writing COMM/NAV Avionics Software

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $75.00 Hourly

Areas of Expertise Embedded Systems Yes 1 4 - 6 Years
Software Skills C++ - Advanced Level Yes 1 6 + Years
 
Job Number: JE-1447-1S
Job Location: Palmdale, CA
Rate: 75/hr negotiable
Per Diem: no
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
Software Engineer
Work Location: Fort Worth, TX
Status: Open
Software Engineer
Qty: 1
Desired Start Date: 5/6/2019
End Date: 5/1/2020

Job Description:
This position is with the Advanced Development Programs Software Systems group in Fort Worth, TX. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. (For positions that perform IT responsibilities, use E646, Systems Engr-IT).

This position is for a software engineer. The chosen candidate will be joining a team that provides technical support to multiple organizations within the Aeronautics Business Area. The individual will be responsible for software development of Artificial Intelligence applications and tools for use within multiple environments.

Required Skills:

Master's Degree in Artificial Intelligence, Machine Learning, Advanced System Design, or Software Engineering

Experience with C++, Java, and Python
Experience with Tensow Flow, PyTorch, Keras, or SciKit-Learn
Experience with Windows and LINUX/UNIX development platforms
Experience with integrated development environment (IDE) tools, such as Jupyter Notebook, Eclipse or Spyder
Experience with Agile software development
Experience with Artificial Intelligence technologies
Experience with automated testing and creation of unit tests
Experience with MATLAB or Simulink
Working knowledge of Keyless Signature Infrastructure (KSI) and/or other digital signature platforms (i.e. PKI)
Working knowledge of source code management
Experience presenting technical status and solutions to leadership
Ability to travel

Specific required skills identified in Job Description

Level: Level 4: BS+11 YRS or MS+9 YRS
Pay Rate: $65.74 Hourly

Areas of Expertise Emebedded Software Development Yes 1 4 - 6 Years
 
Job Number: JE-1474-1TS
Job Location: Fort Worth, TX
Rate: 65.74/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer(Real-time-Active secret clearnce)

Description:
Job Description:
• Our Client is looking for software engineers to use their expertise to dream up next-generation software capabilities for some amazing aerospace platforms.
• To develop cutting edge sensors and mission systems, high bandwidth communication systems, large-scale simulation systems, airplane and weapons flight controls, cybersecurity solutions and much more.
• You can also develop modeling, simulation, testing, and analysis tools using a multitude of software languages including C++, C, C#, Python, MatLab and Ada.
Basic Qualifications (Required Skills and Experience):
• Active Secret U.S. Security Clearance that has been investigated in the past 6 years
• Equivalent of 6-7+ years of experience with embedded real-time software development
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Desired Experience, Skills, and Qualifications:
• Equivalent of 6-7+ years of experience in Mission Systems software development
• Experience working in Agile software development framework.
 
Job Number: 201811
Job Location: St.Louis, MO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Quality Engineer 2 - Clearance CA

Description:
Software Quality Engineer 2 (Job Number: 18023093)

# of Openings: 3

Location: California-San Diego

Target Start Date: Nov 5, 2018

Target End Date: Oct 17, 2019

Location: Rancho Bernardo, CA

Pay rate: $41.00 - $45.00

Work Schedule: Must be flexible 1st, 2nd, or 3rd shift

Travel: 25%

The Software Quality Engineer will be responsible for ensuring product and process quality with the software programming skills necessary to team and collaborate closely with systems, software, and test engineers to participate and provide technical oversight, comments, and solution alternatives throughout requirements analysis, design, code, and test.


In this role, the selected candidate will be expected to:
•Participate in bid and proposal efforts to provide cost estimates.
•Review customer, system and software requirements to ensure the flow down of requirements is complete and unambiguous.
•Review and verify design documents meet appropriate standards.
•Review source code and provide technical feedback and solutions alternatives.
•Participate in contractual reviews and audits, program/IPT meetings, and configuration control board meetings.
•Perform process audits of software development processes to assure compliance to established policies, procedures, work instructions, and program specific plans.
•Examine the products associated with the preparation and configuration control of software test environments to assess the team’s readiness to enter formal testing.
•Witness execution of software qualification and system acceptance tests to ensure tests are executed in accordance with approved test procedures, requirements are fully verified, and that all test procedure and software anomalies are documented and tracked to closure.
•Evaluate and ensure software suppliers possess the capability and capacity necessary to execute and deliver procured software with unquestionable quality.
•Facilitate thorough root cause analysis on major findings and ensure appropriate corrective and preventive actions are developed and implemented in a timely manner.
•Conduct data analysis, data integration, and data management


Basic Qualifications:
•Bachelor’s degree in Computer Science, Software Engineering, Computer Information Systems, or related discipline from an accredited institution
•Minimum 3 years of experience in Software Quality, Software Engineering or related discipline

Preferred Qualifications:

•Master’s Degree
•Proficient in computer programming language(s) (e.g. C,C++, C#, Java, Java Script, etc.)
•Strong analytical and problem solving skills
•Outstanding communication and collaboration skills
•Experience in audits of engineering processes
•Experience in software supplier management (i.e.,supplier audits)
 
Job Number: MB-1699S6
Job Location: San Diego, CA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Test Engineer

Description:
Must Be Eligible for a Clearance.

Experience developing applications for Service Oriented Architectures
Experience with network and protocol test tools such as CANoe, CANalyzer, WireShark
Experience with one or more RTOS (Linux, QNX, VxWorks)
Experience with OSEK-compliant embedded RTOS or similar
Experience developing software that is compliant to safety standards such as MIL-882e and/or ISO 26262
Experience performing static and dynamic code analysis
Familiarity with UML, SysML, and Model-Based Systems engineering
Experience using the UNITY simulation engine
Active and passive sensor data management and processing
Familiarity with Atlassian development tools (JIRA, Confluence, Bitbucket)
 
Job Number: 46223
Job Location: MD
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sourcer / Recruiter TX

Description:
164525
1451-1 Sourcer/Recruiter
Work Location: Fort Worth, TX

Qty: 2
Desired Start Date: 4/23/2019
End Date: 4/17/2020

Job Description:
Manages the strategic sourcing, recruiting, and local employment branding and marketing campaigns for Aeronautics' Company. Tracks success of branding, marketing, and sourcing efforts to demonstrate ROI and drive investment decisions. Drives brand awareness and the candidate value proposition for Aeronautics' Company to reinforce as the employer of choice. Performs sourcing for positions for which it has typically been difficult to recruit diverse talent or that require highly unique capabilities. Delivers available, diverse, qualified sourcing pools for recruiters to screen talent and prepare slates. Executes recruitment branding, marketing and outreach, and social media strategies through collaboration and partnership with stakeholders in Talent Acquisition, Talent & Organizational Capability, Communications and Community Relations, Corporate Talent Acquisition media and marketing, Workforce Strategy, Diversity and Inclusion, and Compensation, as well as relevant external organizations (e.g., vendors, community partnerships). Applies industry best practices and studies other organizations’ sourcing, branding, and marketing practices to continually strengthen the strategy and execution for Aeronautics. Utilizes Microsoft Office (Word, Excel, PowerPoint, Visio, Project) and other software tools/ solutions as needed. Performs other duties as assigned.


Seeking a level 4 recruiter with 10+ years experience.
- Aerospace/Aviation recruiting experience is required.
- Must have experience recruiting for 'Cleared'
positions, including Software Engineers, Aeronautical
Engineers, Mechanical Engineers.
- Excellent organizational skills are required.
- Must be a self starter who takes initiative and an expert
at Building Key Relationships.
- Will accept experience in lieu of degree.
- Potential for long term opportunity for the right candidate.


Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $36.00 Hourly
 
Job Number: JE-1451-1
Job Location: Fort Worth, TX
Rate: 36/hr negotiable
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Systems Engineer II / no clearance TX

Description:
8634137
Job Title: Sr Systems Engineer II

Hours: 8:00am to 5:00pm
Location: McKinney TX United States

# Available Positions: 2

*Job Description:
Space and Airborne Systems (SAS) is seeking a Sensor Model Developer to provide modeling and simulation development and analysis in support of multiple programs. Responsible for developing analytical software, primarily in C++, in a real-time, Linux modeling and simulation environment to evaluate system performance, conduct platform integration, and specify the operational benefits of advanced concepts in complex operational scenarios. Candidate will develop models and simulations, integration those models with other simulations in a platform level laboratory environment, execute analysis plans, and develop reports describing analysis findings.

*Required Skills:
• Experience developing C++ software in a Linux environment
• Experience with computer modeling and simulation in a real-time environment
• Strong technical writing and oral communication skills

Desired Skills:
• Experience with model and simulation development at the sensor or airborne platform level
• Experience conducting performance analysis and simulation of airborne sensors or mission systems
• Strong grasp of mathematics and statistics, including multivariate calculus, linear algebra, probability and statistics
• Proficiency with scientific computing environments, models, and/or simulations such as the following: MATLAB, Simulink, MathCAD, AREPS, NVTHERM, ExtendSim
• Experience in Numerical Optimization Techniques, Analysis of Alternatives, or Design of Experiments
• Ability to understand tactics as described by military experts and to represent their employment (verbally, graphically, and in simulations)
• Experience with software development within an Agile development framework

*Required Education: (This is the minimum level of education or degree and major required for the position.)
• B.S. degree in Math, Physics, Computer Science or Engineering or related technical major.

Desired Education: (This would be any additional education and/or major that would be considered.)
• M.S. degree in Math, Physics, Computer Science or Engineering or related technical major.
 
Job Number: MB-R8634137
Job Location: McKinney, TX
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Technical Writer

Description:
Sr Technical Writer is directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content. EWIS (Electrical Wiring Interconnection System) best practices, S1000D Technical Publication Specification, STE (Simplified Technical English), and PLM (Product Lifecycle Management) database experience desired.


Principle Duties and Responsibilities:

Sr Technical Writer with minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Sr Technical Writer has extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Engineer-Gear Systems

Description:
Our client is looking for an engineer who has experience with precision gear systems, accessory gearboxes, power generation gearboxes, actuators, propeller drives.

The Senior Design Engineer is expected to have high proficiency and experience with Creo or CATIA with experience in MASTA or ROMAX regarded as a plus. The Senior Design Engineer must have demonstrated experience in the management of mechanical system design, integration and development. Analytical knowledge of Reliability, FMECA, Ansys, Nastran, RCCA and Six Sigma are also key to the position. Familiarity with formal Qualification Standards such as DO160, MIL-STD-810 and/or EUROCAE ED-14 is desirable. Job function requires timely preparation of all associated engineering documentation including but not limited to Project Plans, Test Plans, Project deliverable documents and Engineering Changes. The ideal candidate would have broad technical knowledge of aircraft systems and awareness of current aircraft developments and technologies. The ideal candidate would also have a comprehensive knowledge and experience in Aerospace Manufacturing Processes and Methods.

• University degree in Mechanical or Aerospace Engineering.
• Minimum of ten (10) years of relevant design experience (Aircraft Systems Engineering).
•Proficiency in design and analytical software tools, Microsoft Word, Excel, Project, PowerPoint.
• High proficiency in written and verbal communication.
• Ideally 10 plus years’ experience in an aerospace gear system, transmission or actuation related industry.
• Experience in Advanced Gear System Design Software such as MASTA and ROMAX is a plus.
• Demonstrated ability to manage and support Project Engineering and Project Schedules.
 
Job Location: Salt Lake City, UT
Rate: $55-$60
Per Diem: Yes, Split
Overtime: Possible
Duration: 12 Months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Recruiter

Description:
Sr. Recruiter

Charlotte, NC
$37.72/hr
6 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This company is seeking a talented, customer-focused Digital Technology (DT) Recruiter to support our Digital Technology team for all US Domestic sites with recruiting and project activities. The DT Recruiter will be responsible for conducting high-level recruitment activity in support of discipline specific job requirements across all domestic US geographies throughout the Collins Aerospace Digital Technology organization. Additionally, you will help manage a project with significant scope, complexity, and leadership visibility.

You will be accountable for the following:
• Build strong, strategic partnerships with business leaders to source key technical talent in a timely and efficient manner
• Perform full-cycle recruiting support (including, but not limited to, sourcing, screening, scheduling phone and on-site interviews, prepping candidates for interviews, etc) for all critical roles while striving for a positive candidate experience
• Facilitate efficient intake and interview debrief sessions with Hiring Managers
• Proactively communicate with Hiring Managers on the status of their requisitions, provide a strong slate of pre-screened, diverse candidates, and regularly follow-up with them to obtain feedback
• Develop effective and creative sourcing strategies that attract diverse, passive candidates and applicants through multiple channels/resources
• Grow and maintain a robust and diverse talent pipeline of passive candidate profiles
• Manage, track, and report on activities and key metrics/milestones during weekly status meetings
• Perform other duties as assigned

Minimum Qualifications:
• BA or BS degree required
• A minimum of five years of professional recruiting experience in either a Corporate or Agency-based organization required
• A minimum of three years of technical and Information Technology recruiting experience required
• IT recruiting experience and knowledge involving roles in SAP, Infrastructure, UX Design, and Software Development
• Outstanding communication and organizational skills
• Must be a U.S. Citizen or U.S. Permanent Resident
• Experience managing and effectively prioritizing multiple searches and projects in a fast-paced environment

Preferred Qualifications:
• Proven ability to identify and source exceptional talent into an organization
• Proficient with Applicant Tracking Systems, Pipelining applications, and on-line recruiting resources (specifically WorkDay)
• Prior experience within a retained executive search firm highly desired
• Demonstrated efficiency with time-management and organizational prioritization
• Proven ability to efficiently manage competing priorities
• Customer-focused attitude
• Aerospace industry knowledge preferred
 
Job Number: 10664
Job Location: Charlotte, NC
Rate: 37.72
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Recruiter

Description:
Sr. Recruiter

Fort Worth, TX
$37.14/hr
1 year W2 contract
First Shift, 9/80
*MUST BE A U.S. CITIZEN*

Manages the strategic sourcing, recruiting, and local employment branding and marketing campaigns for This company's Aeronautics' Company. Tracks success of branding, marketing, and sourcing efforts to demonstrate ROI and drive investment decisions. Drives brand awareness and the candidate value proposition for Aeronautics' Company to reinforce This company as the employer of choice. Performs sourcing for positions for which it has typically been difficult to recruit diverse talent or that require highly unique capabilities. Delivers available, diverse, qualified sourcing pools for recruiters to screen talent and prepare slates.

Executes recruitment branding, marketing and outreach, and social media strategies through collaboration and partnership with stakeholders in Talent Acquisition, Talent & Organizational Capability, Communications and Community Relations, Corporate Talent Acquisition media and marketing, Workforce Strategy, Diversity and Inclusion, and Compensation, as well as relevant external organizations (e.g., vendors, community partnerships). Applies industry best practices and studies other organizations’ sourcing, branding, and marketing practices to continually strengthen the strategy and execution for Aeronautics. Utilizes Microsoft Office (Word, Excel, PowerPoint, Visio, Project) and other software tools/ solutions as needed. Performs other duties as assigned.

Additional:
- Seeking a level 4 recruiter with 10+ years experience.
- Aerospace/Aviation recruiting experience is required.
- Must have experience recruiting for 'Cleared'
positions, including Software Engineers, Aeronautical
Engineers, Mechanical Engineers.
- Excellent organizational skills are required.
- Must be a self starter who takes initiative and an expert
at Building Key Relationships.
- Will accept experience in lieu of degree.
- Potential for long term opportunity for the right candidate.
-Bachelors degree required
 
Job Number: 10672
Job Location: Fort Worth, TX
Rate: 37.14-45.00
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
Location: Phoenix, AZ
Rate: $58.00/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelors Degree****

Job Description:
- The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
- The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
- Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation.
- Also includes managing Problem reports for hardware that has already been delivered.
- The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment.
- As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities:
- Primary ownership of systems development processes.
- Support the development and review of systems/hardware requirements decomposed from customer specifications.
- Coordinate with systems and hardware teams to understand the cross functional requirements and constraints.
- Assess design maturity and reviewing technical risk.
- Participate in component design reviews.
- Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
- Support project planning efforts and ensure execution to schedule and budget.
- Design responsibilities include architecture, development and analysis of RF, wireless and high speed communication links.
- Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
- Evaluate and approve electronic components to meet requirements for availability, performance and cost.
- Support project planning efforts and ensure execution to schedule and budget.
- Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
- Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.

Qualifications:
- Bachelor's degree required.
- Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
- Good computer skills with ability to learn new programs/software
- Ability to work under pressure and within time constraints
- Excellent organizational skills with ability to multi-task amidst rapid change
- Hardware Verification experience including, test procedure development, robustness testing and debug
- Experience developing hardware/software integration plans
- Experience creating LRU level (black box) requirements based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
- Excellent written and verbal skills
- Good computer skills with ability to learn new programs/software
- Ability to work under pressure and within time constraints
- Excellent organizational skills with ability to multi-task amidst rapid change
- Systems Verification experience including, test procedure development, robustness testing and debug
- Experience with configuration management and problem reporting tools

Preferred Qualifications:
- Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
- Experience using Mentor Graphics DxDesigner and Expedition’
- Masters’ degree in Electrical Engineering.
- Experience with high reliability controller electronics and power switching circuitry.
- Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 10408
Job Location: Phoenix, AZ
Rate: $58.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer (Aerospace Electronic Control Units)

Description:
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for Aerospace applications. The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.

The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities
• Primary ownership of Systems Development Processes.
• Support the development and review of Systems / Hardware requirements decomposed from customer specifications.
• Coordinate with Systems and Hardware teams to understand the cross functional requirements and constraints.
• Assess design maturity and review technical risk.
• Participate in Component Design reviews.
• Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
• Support project planning efforts and ensure execution to schedule and budget.
• Design responsibilities include architecture, development and analysis of RF, wireless and high-speed communication links.
• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
• Evaluate and approve electronic components to meet requirements for availability, performance and cost.
• Support project planning efforts and ensure execution to schedule and budget.
• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
• Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change
• Hardware Verification experience including, test procedure development, robustness testing and debug
• Systems Verification experience including, test procedure development, robustness testing and debug
• Experience with configuration management and problem reporting tools
• Experience developing hardware/software integration plans
• Experience creating LRU level (black box) requirements-based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
• Excellent written and verbal skills

Preferred Qualifications
• Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Experience using Mentor Graphics DxDesigner and Expedition
• Masters’ degree in Electrical Engineering
• Experience with high reliability controller electronics and power switching circuitry
• Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 1910097977
Job Location: Phoenix, AZ
Duration: 1 year
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst

Description:
Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Requirements:
- This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure.
- The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis.
- The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers.
- The candidate will be responsible for documenting work clearly and concisely.
- The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures.

Education:
- B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
- Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).
 
Job Number: 9732
Job Location: Palmdale, CA
Rate: $80.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 2

Description:
Structural Analysis Engineer 2

Location: Tukwila, WA
Duration: 11 months

Job Description:
Looking for early career structural analysis engineer to support client Defense, Space and Security in the Puget Sound region of Washington State; providing support to the Presidential Airplane Recapitalization Program (VC-25B), the Poseidon Program (P-8) and/or the Puget Sound Design Center (including the T-X program).

Job responsibilities may include internal loads (FEM), static, fatigue, and/or damage tolerance stress analysis to support program design, fabrication, testing, and/or structural integrity activities.

Performs basic structural analysis using well defined analysis tools to develop the structural environment, characteristics and performance. Supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general supervision.

Category Name Required Level
Software Skills Finite Element Analysis (FEA) Yes Intermediate
Software Skills Nastran Yes Intermediate
Software Skills Patran Yes Intermediate

Education / Experience:
- Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctorate of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
- At least 2 or more years’ experience in structural or mechanical systems analysis or finite element analysis
- Experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems

Skill Code:
63Y-Structural Analysis

Please share updated resume at ravi @iconma.com if interested..
 
Job Number: 19-05769
Job Location: Tukwila,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 3

Description:
Structural Analysis Engineer 3

Location: Tukwila, WA
Duration: 11 months

Description:
Looking for experienced structural analysis engineer to support client defense, Space and Security in the Puget Sound region of Washington State; providing support to the Presidential Airplane Recapitalization Program (VC-25B), the Poseidon Program (P-8) and/or the Puget Sound Design Center (including the T-X program). Job responsibilities may include internal loads (FEM), static, fatigue, and/or damage tolerance stress analysis to support program design, fabrication, testing, and/or structural integrity activities.

Develops, integrates and documents structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general direction.

Skills:
Category Name Required Level
Software Skills Finite Element Analysis (FEA) Yes Intermediate
Software Skills Nastran Yes Intermediate
Software Skills Patran Yes Intermediate

Education / Experience:
- Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctor of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
- At least 5 or more years’ experience in structural or mechanical systems analysis or finite element analysis
- Experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems

Skill Code: 63Y-Structural Analysis
 
Job Number: 19-05772
Job Location: Tukwila,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 3-Tukwila

Description:
Structural Analysis Engineer 3

Location: Tukwila, WA
Duration: 11 months

Description:
Looking for experienced structural analysis engineer to support client defense, Space and Security in the Puget Sound region of Washington State; providing support to the Presidential Airplane Recapitalization Program (VC-25B), the Poseidon Program (P-8) and/or the Puget Sound Design Center (including the T-X program). Job responsibilities may include internal loads (FEM), static, fatigue, and/or damage tolerance stress analysis to support program design, fabrication, testing, and/or structural integrity activities.

Develops, integrates and documents structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Develops test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by investigating failures and analyzing improvements. Works under general direction.

Skills:
Category Name Required Level
Software Skills Finite Element Analysis (FEA) Yes Intermediate
Software Skills Nastran Yes Intermediate
Software Skills Patran Yes Intermediate

Education / Experience:
- Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctor of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
- At least 5 or more years’ experience in structural or mechanical systems analysis or finite element analysis
- Experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems

Skill Code: 63Y-Structural Analysis
 
Job Number: 19-05772
Job Location: Tukwila, WA
Per Diem: split
Overtime: possible
Duration: 11 months
Start Date: 4/25/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer 4-Tukwila

Description:
Structural Analysis Engineer 4

Location: Tukwila, WA
Duration: 11 months

Description:
Looking for experienced senior structural analysis engineer to support client Defense, Space and Security in the Puget Sound region of Washington State; providing support to the Presidential Airplane Recapitalization Program (VC-25B), the Poseidon Program (P-8) and/or the Puget Sound Design Center (including the T-X program). Job responsibilities may include internal loads (FEM), static, fatigue, and/or damage tolerance stress analysis to support program design, fabrication, testing, and/or structural integrity activities.

Leads development, integration and documentation of structural requirements to establish the system design. Coordinates with other engineering groups to establish the product's environment. Guides product design and verifies structural integrity by using and developing analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance. Leads development of test plans and configurations, supports test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications. Defines and documents certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied. Supports in-service products by leading investigations into failures and analyzing improvements. Develops analytical processes/tools to improve effectiveness, quality and efficiency of the development effort. Works under minimal direction.

Skills:
Category Name Required Level
Software Skills Finite Element Analysis (FEA) Yes Advanced
Software Skills Nastran Yes Advanced
Software Skills Patran Yes Advanced

Education / Experience:
- Must have at least a Bachelor of Science Degree in Aeronautics/Aerospace, Mechanical, or Civil Engineering. Bachelor, Master or Doctor of Science degree from an accredited course of study. ABET is the preferred, although not required, accreditation standard.
- Must have 9 or more years’ experience in structural or mechanical systems analysis or finite element analysis
- Significant experience with stress, fatigue, and/or damage tolerance analysis on primary structural components or mechanical systems

Skill Code:
63Y-Structural Analysis.
 
Job Number: 19-05775
Job Location: Tukwila, WA
Per Diem: split
Overtime: possible
Duration: 11 months
Start Date: 4/25/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
162964
1151-1 Engineering - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 7
Desired Start Date: 12/18/2018
End Date: 12/7/2019

Job Description:
This position requires an Aircraft Stress Analyst to use their technical expertise to perform analysis of aircraft primary and secondary structure. The candidate will have a complete understanding of technical principles, theories and concepts in the field of aircraft structural analysis. The candidate will be expected to work independently with only general oversight and will be required to provide guidance to junior engineers. The candidate will be responsible for documenting work clearly and concisely.

The candidate will also be expected to use their technical expertise to develop structural analysis methods and perform structural analysis of advanced composite structures. Candidate must have working knowledge/experience with FEM software (Nastran or Abaqus), Computer Aided Design software (CATIA V5), and other pre/post processor software (Slim, Vision, etc.).

Work Location: Palmdale, CA
Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $71.98 Hourly

Skills:
Software Skills Abaqus No 9 6 + Years
Software Skills Finite Element Analysis (FEA) No 9 6 + Years
Software Skills Nastran No 9 6 + Years
Technical Skills Stress Analysis Yes 9 6 + Years
 
Job Number: JE-1151-1S5
Job Location: Palmdale, CA
Rate: 71.98/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design / Catia V5 TX

Description:
164495
1416-1 Structural Design
Work Location: Fort Worth, TX
Status: Open

Qty: 3
Desired Start Date: 3/18/2019
End Date: 3/31/2020

Job Description:
Primary role is design of structural detail parts, assemblies and installations, but may support equipment and systems installations as well. Engineer shall be responsible for development of layouts, preparation of engineering drawings and coordination of related activities. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Manufacturing, and other Installation Design teams (ECS/Hyd, Harness, Subsystems) to ensure that designs meet customer and derived requirements. Layouts, studies, new drawings, revised existing drawings, and ECNs (engineering change notices) will use CATIA V5 and require a strong understanding of GD&T and Interchangeability. Although the primary assignment will be to support retrofit designs, could also support mod line issues, production floor support, and field requests.

Degree not required but must be experienced in aerospace design. F-16 release system familiarity a plus.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Areas of Expertise CATIA Yes 1
Areas of Expertise 3D Models No 2
Software Skills MS Office - Intermediate Level No 4
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 3
 
Job Number: JE-1416-1ATO
Job Location: Fort Worth, TX
Rate: 55-65/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer - Stress 5 / FEMAP NX CAE FL

Description:
164612
1757 Structural Engineer - Stress 5 (Job Number: 19005364)

Number of Openings: 2

Location(s): United States-Florida-Melbourne

Shift: 1st Shift

Target Start Date: Apr 15, 2019

Target End Date: Sep 25, 2020

Rate: $83/hr

Location: Melbourne, FL.

Work Schedule: 9/80

Duration: 6 months

Perform fatigue and detailed stress analysis of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program. Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives. The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization. Tools utilized may include FEMAP, NX,Teamcenter and other software applications.


Basic Qualifications

Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis; 12 years of experience with a Masters Degree.


Preferred Qualifications

Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
 
Job Number: JK-1757
Job Location: Melbourne, FL
Rate: 83/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer - Stress Analyst 5 FL

Description:
163977
Structural Engineer - Stress Analyst 5 (Job Number: 19001526)

Number of Openings: 3

Location(s): United States-Florida-Melbourne


Shift: 1st Shift

Target Start Date: Mar 11, 2019

Target End Date: Sep 6, 2019

Rate: $80 to $83/hr

Location: Melbourne, FL.

Work Schedule: 9/80

Duration: 6 months

Perform fatigue and detailed stress analysis of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program. Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives. The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization. Tools utilized may include FEMAP, NX,Teamcenter and other software applications.

Basic Qualifications:

Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis; 12 years of experience with a Masters Degree.


Preferred Qualifications:

Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions
 
Job Number: MB-1721
Job Location: Melbourne, FL
Rate: 80-83/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer

Description:
Eligibility for DOD Secret security clearance

Lean Six Sigma Green / Black Belt

Ability to comfortably learn and adapt to new (company) software tools and databases necessary for the job; such as Autotime, TipQA, PDM, Excel, etc.

Experience in a high volume manufacturing environment
Strong understanding of 8D problem solving methodology
Ability to generate cost reductions
Experience executing or coaching suppliers on AS9102 FAIs and PPVs

Working knowledge of APQP and PPAP techniques
 
Job Number: 46414
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Design Engineer

Description:
The primary task for the person in this role will be to develop engineering definition for components and subsystems within the pressurized cabin of the aircraft. Engineers in this position will also be expected to review planned manufacturing procedures to ensure compliance with design specifications and intentions, support test definition for verification testing of components and subsystems, and manage components and subsystems through their full lifecycle.

• Works with Structural Design team to develop conceptual designs for primary and secondary composite structures
• Develops rapid prototypes for evaluation throughout design development process
• Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations
• Establishes manufacturing tolerances for production of structural components
• Develops and documents system requirements and interface constraints for components
• Coordinates with Analysis and Testing departments to ensure component performance in flight environments
• Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
• Participates in the review, approval, and release process of engineering definition
• Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
• Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
• Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Required:

• Education and Experience. Bachelor’s degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering.
• 3 years or more experience design engineering for aerospace composite fabrication and assembly processes
• Proficient with CATIA V5
• Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
• Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
• Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
• Experience designing for aerospace environments desired
• Experience in the development of human spaceflight hardware desired
• Experience with Product Lifecycle Management (PLM) software and configuration management processes
• Excellent analytical and decision-making skills
• Excellent verbal and written communication skills Excellent organizational and time-management skills Strong team player
• Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook


The Structures Company is an AA/EOE.
 
Job Number: 303
Job Location: CA
Rate: $65-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
- Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
- Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
- Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

- Our client is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development.
- Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment.
- Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation.
- Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with modern software intensive mission systems architecture.
- Must be a US Citizen; this position will require a government security clearance.
- This position is located at a facility that requires special access.

Skills Needed:
- Read Engineering Drawings and Parts List
- Capture data digitally from parts lists and excel spreadsheets to form new lists
- Conduct meetings for changes to hardware allocations, tracking and reporting
- Project Planning, Architecture, Functional Allocations
- MS Excel, linking and pivot tables

Attributes:
- Good attitude about work and working with others
- Attention to detail
- Good communication skills
- Team player
- Initiative and ability to work
- Passion for detail and getting the job done in a timely fashion
- RF Testing experience
- Experience with harness design and fabrication
- Experience with hardware configuration management

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- Will accept experience in lieu of degree
- Manager will consider both 2 and 3 level candidates.
- Must have Aviation/Aerospace experience
- Experience Writing/Testing/Integrating/Developing Software for Imbedded and C++ required
 
Job Number: 10789
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Secret Security Clearance Preferred

Capture data digitally from parts lists and excel spreadsheets to form new lists
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
RF Testing experience
Experience with harness design and fabrication
Experience with hardware configuration management
 
Job Number: 46436
Job Location: CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
We are looking for an enthusiastic and highly-motivated individual to join us as a Systems Engineer to support the design, development, verification & validation, and operational support of ECLSS and ATCS hardware.

Responsibilities include:
• system development trade studies and optimization,
• development of concepts of operations,
• developing product requirements at the system/component level for mechanical/electrical/software,
• thermal/fluid/chemical system modeling,
• steady state & transient performance analyses
• component sizing.

Education / Certifications
BS in Mechanical/Aerospace/Chemical/Systems Engineering with 5-25 years of experience

Experience / Basic Qualifications
• Relevant component hardware experience: heat exchangers, pumps/fans/separators/motors/motor controllers, chemical beds, sensors, valves, accumulators
• Ability to work well both independently and within an integrated product development (IPD) team environment
• Excellent attention to detail
• Excellent writing & math skills
• Must be a US Person

Preferred Qualifications
• Experience performing thermal/fluid/chemical analyses
• Experience on hardware development program: proposal/development/manufacture/verification/operational support
• Experience performing system development/integration/architecting
• Experience deriving & writing requirements for development hardware (DOORS)
• Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
 
Job Number: 1910097467
Job Location: Windsor Locks, CT
Per Diem: no
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Per Diem Split: No


****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelor's Degree****


Job Description:
- Our client is one of the world's largest suppliers of technologically advanced aerospace and defense products.
- The ISR & Space Systems business unit provides products and services to global government and commercial markets that enable mission success in the harshest environments in space, in the air, at sea, and on the ground.
- They design and manufacture Environmental Control and Life Support Systems (ECLSS) and Active Thermal Control Systems (ATCS) on a number of space & sea platforms including the International Space Station, the U.S. space suit, and the next generation of space vehicles such as CST-100 and Orion, and the US Navy’s submarine fleet.
- Our client is looking for an enthusiastic and highly motivated individual to join them as a Systems Engineer to support the design, development, verification & validation, and operational support of ECLSS and ATCS hardware.


Responsibilities include:
System development trade studies and optimization, development of concepts of operations, developing product requirements at the system/component level for mechanical/electrical/software, thermal/fluid/chemical system modeling, steady state & transient performance analyses, as well as component sizing.


Education / Certifications:
- Bachelors in Mechanical/Aerospace/Chemical/Systems Engineering with 5-25 years of experience


Basic Qualifications:
- Relevant component hardware experience: heat exchangers, pumps/fans/separators/motors/motor controllers, chemical beds, sensors, valves, accumulators
- Ability to work well both independently and within an integrated product development (IPD) team environment
- Excellent attention to detail
- Excellent writing & math skills
- Must be a US Person


Preferred Qualifications
- Experience performing thermal/fluid/chemical analyses
- Experience on hardware development program: proposal / development / manufacture / verification / operational support
- Experience performing system development/integration/architecting
- Experience deriving & writing requirements for development hardware (DOORS)
- Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
 
Job Number: 10341
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
1475-1 Systems Engineer
Work Location: Palmdale, CA
Status: Open

Systems Engineer
Qty: 5
Desired Start Date: 4/15/2019
End Date: 10/31/2019

Job Description:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

The Skunk Works is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture. Must be a US Citizen; this position will require a government security clearance. This position is located at a facility that requires special access.

Bachelor's or above in a Technical Engineering Discipline

Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $75.00 Hourly
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV

Description:
Location: Jupiter, FL
Rate: $60.00 - $66.00/HR
Duration: 6 month contract
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** This is a Hardware Systems role, NOT Software systems **

Duties:
Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.

Typical responsibilities include:
- May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
- Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
- Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
- Represents the organization in conferences to resolve important questions and to plan and coordinate work.
- May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
- Develops solutions to complex problems which require the use of ingenuity and creativity.
- Work is reviewed at extended intervals for desired results and achievement.
- Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
Required:
-DOORS
-DOORS NG
-DOORS requirements management
-Jazz Team Server tool knowledge
-Systems requirements management and flowdown/decomposition for subsystems and components
-Rocket hardware experience

Desired:
-Hardware requirements development for complex systems including propellant valves/electro-mechanical actuators

Education:
- BS Engineering
 
Job Number: 10548
Job Location: Jupiter, FL
Rate: $60.00 - $66.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
IPC experience preferred. Completions Illustrated Parts Catalog special project
Four (4) years Technical Publications writing experience. Three (3) years of Standard Graphic Markup Language (SGML) or SGML-related software applications experience required.

Responsible (either individually or with other team members) for the writing of major portions of technical publications. Supports the complete workflow process to ensure successful completion of each revision cycle and distribution of technical publications. Complies with established quality processes to ensure accuracy, ease of use and timely delivery of each revision cycle content.

Write technical publications content as directed. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. Consult with internal, external customers and Engineering to create/revise technical manuals to support the department/corporate operating priorities. Provide input to management on new processes or technology for integration into the technical publications business model. Assist in developing solutions for overcoming the technology/technical issues introduced by outside suppliers for incorporation into existing manuals. Work with management, other departments, and team members in the development of specific project data. Provide liaison with Completion Center, Technical Operations, Production and/or Completion Engineering, Service Center to obtain the necessary approval for technical information prior to its release to customers. Participate with publications team to ensure all internal department workflows and business processes are followed for issues relating to producing and delivering technical publications and associated Computerized Maintenance Program (CMP) data. Work with internal/external customers in the development of specific project requirements of source data to ensure a seamless incorporation of new data in the publications environment. Perform other duties as assigned.
 
Job Number: 18-826-139424
Job Location: GA
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 1

Description:
Test & Evaluation Engineer 1

Location: Tukwila, WA
Duration: 3 Months

Job Description:
Participates in gathering and analyzing requirements for test measurement systems. Assists in the development of test procedures, and instrumentation and configuration definition to perform the test within the constraints of the test plan. Develops solutions to calibration systems problems. Performs data analysis, develops and utilizes data processing tools. Designs simple component level hardware or software. Uses analytical tools to verify the design. Verifies collection of complete data set. Maintains test logs, prepares simple test reports and archives data. Works under direct supervision.

Required:
Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

Skill Code: 63Z-Structural & Mech Testing

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-05359
Job Location: Tukwila,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 2

Description:
Test & Evaluation Engineer 2

Location: Tukwila, WA
Duration: 3 months

Description:
Assists in demonstrating the effectiveness of test methods. Develops simple test procedures, and instrumentation and configuration definition needed to perform the test and minimize risk. Designs component and sub-assembly level hardware or software and uses analytical tools to verify the design. Assists in coordinating the manufacture and assembly of test hardware. Identifies solutions to basic problems and supports the development of metrology processes, methods, and tools. Supports development of test debrief material. Participates in evaluation of test performance data. Reviews test data for accuracy, quality and/or fidelity prior to delivery to customer. Alerts senior engineers of off-nominal data. Prepares test reports for review. Works under general supervision.

Education / Experience:
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification.

Required: Bachelor or Master degree from an accredited course of study, in engineering, com

Skill Code: 63Z-Structural & Mech Testing

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-05360
Job Location: Tukwila,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Must be able to obtain a secret clearance.

Five years of experience designing test equipment and modifying test software using NI LabVIEW/TestStand CVI or C+ from Test Requirements for electro-optical and electro-mechanical systems for acceptance testing by test operators.

Experience working in a lab and factory environment.

Ability to read specifications and/or statements of work and design test systems
 
Job Number: 46258
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Level Test Engineer (Advanced Electrical Instrumentation and Data Acquisition Systems)

Description:
The ideal candidate will have solid electronic component troubleshooting and test skills, including digital motor controllers, brushless DC motors, FPGAs and VHDL experience. They should also have component circuit board level testing and troubleshooting, test procedure writing and requirements distillation experience.

The candidate will:
•design, implement and maintain test processes for Space Systems hardware using lean philosophies and techniques.
•take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
•this can involve testing, data analysis, and interface with all aspects of the engineering department.

Duties include:
•the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
•daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
•Support laboratory testing of Space hardware,
•Develop and validate tooling concepts,
•Author and maintain operation/test procedures,
•Prepare standardized operation/test sheets,
•Define test rig and facility requirements,
•Participate on program Integrated Product Development teams,
•Review drawings and concepts, and
•Resolve productivity concerns.

Required:
•Experience with Advanced Electrical Instrumentation and Data Acquisition Systems
•Five (5+) years working on the testing of complex electrical systems,
•Testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers,
•Testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
•Applicant must have the capability of working independently and be self-motivated.
•Excellent communication skills, written and verbal.
•Ability to proficiently operate common Microsoft Office software products

Desired •Knowledge of LabVIEW desired.
 
Job Number: 1910100496
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Design Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Our client is seeking an experienced Test Equipment Design Engineer to join our Avionics Engineering Test Equipment Design organization. This position will be located at our facility in Canoga Park, California (Los Angeles area) and will report to the Avionics Special Test Equipment (STE) Design Process Manager.
- We are seeking a Test Equipment Design Engineer whose area of expertise is electronics and automated test system design. Our automated test systems include those designed for testing power and digital electronics for space applications. Units requiring automated test range from single-board computers, data acquisition boards, valve actuators to combustion and electric propulsion rocket engine controllers used in space-based applications. Automated test systems perform acceptance testing at the PWA (board) and unit (box) level.
- In this role, you will initially support the Advance Electric Propulsion System (AEPS program. You will perform an array of technical and project engineering related duties in support of a variety of Avionics STE design projects.
- The person in this position will be responsible for hands-on test and test system design, as well as providing project management and leadership for less senior personnel.

Skills:
Working under limited general direction, responsibilities include, but are not limited to:
70% - Hands-on design and design leadership of automated test system development projects (includes hardware, software and mechanical design). Included is the development of test system requirements and verification methodologies, resolution of anomalies occurring during integration and test of a test system as well as during subsequent delivery and test system usage.
15% - Leading design teams of 2 or more people on automated test system development activities with cost and schedule accountability.
5% - Supporting test system proposals and bids.
10% - Travel to other Aerojet Rocketdyne, customer and supplier sites for design reviews and technical interface meetings.

Additional Qualifications:
- Experience with scripting language such as C, C++ and/or proficient in the use of the National Instruments (NI) development suite (LabWindows/CVI, LabVIEW and TestStand).
- Hands on experience with Test Instrumentation (i.e. Oscilloscopes, Multiplexers, Logic Analyzers, Data Acquisition systems, etc.).
- Proficient in the design of test consoles, test adapters, and/or test cables.
- Proficient in the integration of test hardware and test software.
- Proficient in the development of test equipment drawings.
- Proficient in the development of test system requirements and verification methodologies.
- Proficient in the development of test procedures.
- Proficient in the troubleshooting of equipment, circuit boards, cables, etc.
- Proficient in the resolution of anomalies occurring during integration and test of a test system, and also during subsequent delivery and test system usage.
- Experience in prioritizing and completing several parallel efforts.
- Demonstrated ability to work independently and drive toward goals.
- Self-motivated - willing to engage customers, partners, and suppliers to achieve results.
- Possess process discipline, order, and attention to detail.
- Must have excellent oral and written communication skills and be able to coordinate and collaborate with local/on-site teams, as well as teams at other sites

Education:
Degree and typical experience in engineering classification: Bachelor's of Science degree from an accredited course of study, in engineering, computer science and 5 or more years' experience.

US Citizenship required. Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (U.S. Citizenship required). Must also be able to satisfy federal government requirements for access to government information, and having dual citizenship may preclude you from being able to meet this requirement.

Work Environment and Physical Requirements:
Employees in these positions must possess mobility to work in a standard office setting and to use standard office equipment, including a computer; stamina to sit or stand and maintain attention to detail despite interruptions; may occasionally lift/carry/push/pull up to 25 pounds; may require occasional walking, climbing, stooping, crouching, and/or bending; and vision to read printed materials and a computer screen, and hearing and speech to communicate in person and over the telephone. May require the ability to travel by air or auto. May require the use of personal protective equipment such as safety glasses, safety shoes, and shop coat. These positions may be expected to work varying shifts and hours to ensure successful operation of activities in the organization.
 
Job Number: 10570
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Back to Advanced Job Search