Job Search Results

504 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/21 Sunday 01:02AM Pacific Time by ContractJobHunter. )

Listings 1 - 504

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2117 - ELECTRICAL WIRING DESIGNERS (EWIS) - cv, word doc only

Description:
Perform as a technical authority in wiring 3D design.

Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole.

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes

Provide technical leadership, coaching, men.toring and training to staff.

Identify and manage technical risks & opportunities.

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members.


Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have a minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Have experience with Mentor Graphics Logic tool.

Have a strong sense of responsibility and have good organization skills.

Have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM's, RAE documents and BAPS related to harnesses (Client Eng Practices).

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.

Must Master Knowledge of wiring parts selection in aircraft systems.

Must Master strong communication and negotiation skills.

Must Master excellent troubleshooting skills.

Must Master Knowledge of New EWIS Regulations.

Must be flexible, may be required to contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.
 
Job Number: 2117
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2128 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.
 
Job Number: 2128
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2146 - AVIONICS SYSTEM ENGINEER - resume word doc. only

Description:
Perform technical integration activities associated with all Client Avionic systems.

Generate requirements, analyze, review and approve system designs, oversee system integration, coordinate with various Integrated Product Teams/Suppliers, work with all departments for design validation and verification, testing and certification and provide support to certification authorities as required.

Review and approve the suppliers design through participation in the supplier's development, design, manufacture, integration, and verification process.

Assist in functional, integration, qualification, and ground/flight testing of all the Client avionics systems.

Perform ground and/or flight testing activities for Client avionics systems on dedicated specialist test rigs.

Develop testing procedures, perform test preparation and undertake test vehicle validation.

Participate in troubleshooting and develop/implement resolution plans when testing anomalies occur.

Be asked to work on various avionics systems including but not limited to: Auto-flight: Flight guidance, Auto-throttle, Autoland;
Flight Displays: EFIS, EICAS, HUD;
Flight Management Systems (FMS): Navigation, RNP etc.
FANS/LINK 2000
Communications including VHF, CPDLC, HF, SATCOM etc.
Digital Integration: Integrated Modular Avionics, Data-buses ARINC 429, AFDX, TTP etc).
CVR/FDR, Inertial Reference System and other Client secondary Avionics Systems.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have 15 or more years of relevant aerospace systems experience.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Have a good knowledge of RTCA documents DO-178 and DO-160.

Are familiar with part FAR25 / 525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft in a production or maintenance environment (asset).

Have strong communication skills (written and spoken).

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc). Weekend, night and evening shift may be expected.

Occasional business trips to Wichita, KS may occur.
 
Job Number: 2146
Job Location: Mirabel, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2154 - PROJ. ENGINEER - ELECTRICAL WIRING DESIGN - resume word doc only

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases

Prepare & maintain schedules, cost control & progress reports

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of fifteen (15) years equivalent experience in the aerospace industry.

Proven experience in project management and/or project engineering.

Demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

A high level of communication skills in both French and English is an asset.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and client Change Management process would be an asset.

Knowledge of Electrical Harness Design would be a strong asset.

An understanding of aerospace product certification is an asset.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Certification in Project Management is an asset

An understanding of aerospace product certification is an asset.
 
Job Number: 2154
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2181 - EMC ENGINEERING SPECIALIST - cv - word doc only.

Description:
Analyze new harness designs, assess impact on systems, propose EMC compliance approaches, write/review test plans, test procedures and test reports,

Analyze modifications at aircraft level and check compliance with certification regulations,

Support and witness EMC tests in Canada, United States and Europe as needed

Scope the critical work needed, estimate the time required, plan and execute according to priorities.

Master of Science degree in EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physic

Engineering with five (5) years aerospace experience,

Minimum of five (5) years working experience in EMC/HIRF/Lightning,

You have EMC testing experience,

Minimum of two (2) years working experience with cabling/harness design,

General knowledge of aircraft and harness design,

You have good oral and technical writing skills in English (French is an asset),

Strong communication, troubleshooting and negotiation skills,
 
Job Number: 2181
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2182 - LIAISON ENGINEER - resume - word doc only

Description:
Be responsible for providing engineering support to the production operations at the St-Laurent Assembly

Business Unit (Challenger, CRJ, CSeries, Global & Airbus) and interact with various engineering departments in a schedule driven environment.

Design, analyze and disposition repairs for structural non-conformance reports (NCR) in a timely manner to restore design integrity for aircraft in production

University degree in Mechanical Engineering.

You have MRB experience in the Aerospace field.

You possess Catia and MRB (Material Review Board) work experience.

This position requires energetic people with good communication skills, who are willing to accept responsibilities in a team working environment.

You must also be a person with initiative, strong sense of responsibility and good engineering judgment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc)

Bilingualism would be an asset.
 
Job Number: 2182
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2183 - STRESS ENGINEER - resume - cv. word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.

Have a University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience. Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have knowledge and experience of structural sizing methodologies.

Must be competent in one of the following and have some knowledge of all other aspects of analysis (Structural stress analysis, FEM, fatigue/DTA and loads).

Must have experience in at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Must have Excellent knowledge of aircraft structure and system installation technical requirements ( TCCA, FAA & EASA).

Must have Experience of working with new design and must be able to demonstrate understanding of aircraft component load path and functions.

Must have experience using Patran and Nastran.

Must have working knowledge of Catia V5, finite element modeling and analysis is an asset.

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2183
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2195 - EMC SPECIALIST - cv. word doc only please

Description:
Analyze design changes at aircraft level and check compliance with certification regulations,

Propose compliance approaches, write/revise test plans, test procedures and reports,

Analyze structural and electrical manufacturing deviations, participate in multi-disciplinary troubleshooting team,

Support and witness EMC tests in Canada, United States and Europe as needed,

Scope the critical work needed, estimate the time required, plan and execute according to priorities

Master degree in electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physic Engineering with a minimum overall 15 years aerospace experience.

Minimum of eight (8) years working experience in EMC/HIRF/Lightning.

Minimum of two (2) years working experience with aircraft structures.

EMC aircraft testing experience and FAR 25.981 regulation is an asset.

Have good oral and technical writing skills in English (French is an asset).

Must have strong communication, troubleshooting and negotiation skills.
 
Job Number: 2195
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2205 - STRUCTURAL GROUND. TEST INTEG. - resume word doc only

Description:
Lead multi-functional ground test review meetings.

Coordinate EXP internal activities to meet schedule and budget.

Work in close relationship with EXP Management and Program team.

Provide detail schedule and Status Report.

Execute EXP Test Portfolio following established priorities.

Interact technically with Client Suppliers to achieve Montreal site mandate.

Work in close interaction with Shop and QC (union staff).

Manage budget/operating plan definition and periodic tracking.

Prepare presentations and information for upper management.


Have a Degree in Mechanical engineering or equivalent experience.

Have a minimum of five 5 year experience in the aerospace industry, with close interaction with engineering and production teams.

Have strong communication skills both in English (written, spoken) and French (spoken).

Have good knowledge of MS Project (intermediate or advanced user).

Are a strong team player and can demonstrate superior organizational and leadership skills.

Are driven by results and autonomous.

Previous experience in Project Management is required.

A positive attitude and able to work in a fast-paced, high-pressure environment.

Must have strong communication and negotiation skills.

Must have excellent troubleshooting skills.

Must have Excellent Presentation Skills.
 
Job Number: 2205
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2208 - CONFIGURATION MANAGEMENT - resume word doc only

Description:
Process updated documents (Reports, Eng. Release Notice (EDRN, CAD and non-CAD Datasets, RV, MODSUM, AMO, etc.) in the adequate format used in the information systems (ENOVIA, BDI, SAP).

In charge of the review and final validation of Completions engineering datasets issued at BA in order to release engineering data.

Create and maintain engineering product structure;

Create Material Master in SAP to order parts and raw material following the AMO process.

Determine and communicate the required corrections for the design documents and provide feedback to the design group (quality check).

Perform Data Quality Audits and Data Quality Deficiency RFC Process on all System and Cabinets Dataset released and produce scorecards.

Manage and validate Engineering changes issued to maintain aircraft configurations.

Define and support development of new or revised policies, procedures and BOM processes.

University or college degree/diploma in Aerospace, Engineering, Manufacturing or Configuration Management or other relevant training related.

Have acquired at least five (5) years of experience in a similar role.

Understanding of Nomenclature, Configuration and/or Data Management principals.

Have knowledge of a Product Data Management system (PDM).

Proven experience in SAP.

Experience in CATIA V5 and ENOVIA V5 is an asset.

Are proficient in MS Office.

Have good organizational skills and being able to plan and prioritize job tasks.

Display a pro-active attitude and ability to manage multiple priorities, follow established directives closely and respond to urgent requests in a timely manner.

Ability to work willingly and independently in a fast paced and challenging environment.

Bilingual (French/English) - able to communicate and influence effectively with all levels of the organization, both orally and in writing with ability to work independently both in French and English.
 
Job Number: 2208
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2210 - INDUSTRIAL ENGINEER - cv. word doc only

Description:
Design, balance and updating of follow-up charts of production work.

Draw the diagram of prior artwork, and identify the critical path for each position in a lean manufacturing mindset.

Establish and monitor the progress of off-position work plans in Toronto for the Global 7k / 8k cockpit.

Participate in the development of tempo change scenarios;

Calculate manpower requirements.

Perform time measurement (observation and or time studies).

Participate in the identification of bottlenecks and complete capacity calculations.

Participate in harmonization of changes and their implementation.

Achieve different levels: technical manuals, classifications and approvals solid models and assemblies.

Analyze and verify CATIA 3D models.

Identify sources of waste in the process and propose solutions for improvement.

Monitor and follow the action plans needed to reduce production hours.

Have A College diploma or bachelor%u2019s degree in Industrial Engineering, Mechanical engineering or equivalent

Have a minimum 8 manufacturing experience

Technical knowledge in manufacturing, aerospace structure or aircraft interior finishing is an asset

Have the knowledge of the lean manufacturing principles and the use of visual stream mapping (VSM)

Master the computer software design CATIA V5

Master CAD database such ENOVIA and VPM Nav.

Master Microsoft Excel.

Possess strong problem solving skills.

Possess strong abilities in adaptability, flexibility and team player.

Bilingual - master both French and English

Are available to travel to Toronto if needed.
 
Job Number: 2210
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 12/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2213 - ELEC. SYS. SCHEMATIC DIAGRAM DESIGN - cv, word doc only

Description:
WILL PROVIDE ADDITIONAL INFO


Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Methods.

Minimum fifteen (15) years of relevant working experience in Aerospace .

Knowledge of Mentor Graphics (ESSD) is mandatory.

Have wiring design, wiring installation and/or wiring is a plus.

Must know the Harness Configuration Process.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Possibility for shift work on any day and/or at any time of day Day shift but possibility to work Evening Shift on occasion.
 
Job Number: 2213
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2215 - DESIGNER & STRESS ANALYST - cv - word doc only

Description:
Preliminary and detailed sizings.

Stress analyses to ensure requirements (strength, fatigue, damage tolerance, weights, customers) are met.

Validation of engineering drawings and IPDT support.

Preparation of certification reports and support to entry-into-service.


University mechanical or civil or aerospace engineering degree with a minimum of 5 years relevant experience.

Your experience should include at least one of the following skills in the structural integrity qualification (loads, stress, fatigue and damage tolerance) of airplane components.

Knowledge of CATIA, finite element modeling and analysis is an asset. General computer skills are essential.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Must be able to read and write in English and have good communication skills. Being completely bilingual (French and English) is an asset.

Must have experience in Primary and Secondary Aircraft Structures.

Must have experience with Mechanical systems and systems installations.

Must have experience in design and creation of MBD and 2D drawings of detail parts (machined parts, sheet metal), assemblies and installation drawings in CATIA V5.

Must have working knowledge of CATIA V5 (minimum 2000H experience).

Must have the ability to understand complex engineering issues.

Basic knowledge required :
- 3D and MBD creation in CATIA V5
-GD&T and technical drawings
-Certification rules
-Manufacturing requirements

Must be computer literate and familiar with commonly used software ( MS Office )
 
Job Number: 2215
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/30/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2219 - FLIGHT SIMULATION SPECIALIST - resume word doc only

Description:
Develop aircraft simulation models. These models are used in the design and validation process of a new aircraft, in support of in-service aircraft and for incident investigation. The models are also deployed in training simulators used to instruct flight crews throughout the world. Flight simulation engineers support the qualification of these flight crew training simulators with regulatory authorities.

Use data from computational fluid dynamics, empirical aerodynamic estimation methods, wind tunnel tests and derive aerodynamic derivatives from flight test data to conceive and update the simulation models.

Develop and maintain bombardier's pilot-in-the-loop engineering flight simulators and participate in planning and testing of new and existing designs, in collaboration with flight test crews.

Interact closely with the stability and Control, System Simulation, Fly-by-Wire, Loads, Systems Engineering and aircraft/engine performance groups, and flight simulator manufacturers.

Use state of the art software, such as Matlab/Simulink, MAtrixX/SystemBuild, to develop the simulation models. In addition, customization and automation of these tools is achieved through programming in C/C++ and other software packages.


Have a Bachelor's or master's degree in Aeronautical (or Mechanical) engineering as well as a minimum of eight (8) years of relevant experience in the Aerospace industry.

Have good knowledge and experience in simulation model development, real-time simulation, flight dynamics, flight testing, test data analysis and application of North American and European simulator qualification requirements.

Have good programming skills. Knowledge of Windows and UNIX operating system environments, Matrixx/SystemBuild, Matlab/Simulink, MS Word, MS Excel, MS Powerpoint are essential.

Have good written and oral communication skills.

It would be an asset to have good knowledge and some experience in wind tunnel testing, flight testing, test data analysis and the application of the FAA/EASA Part 25 certification requirements, along with PV-WAVE, Frame Maker.

Have a thorough understanding of flight simulation model generation for design, rig and pilot training purposes.
 
Job Number: 2219
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2222 - PROPULSION SYSTEM INTEGRATOR - CV - word doc only

Description:
Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Duties include:

Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports;
Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.


Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2222
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2223 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Responsible for integration of the flight control, hydraulic and/or landing gear systems on Client platform.

Prepare and define system specifications and requirements,

Prepare and review analysis, design change proposals, tests and certification requirements.

Coordinate product development activities between the supplier of the system and the affected work packages.

Resolve technical problems using accepted methodologies in a cross functional environment.· Be responsible for integration of the flight control, hydraulic and/or landing gear systems on Client platform.

Prepare and define system specifications and requirements,

Prepare and review analysis, design change proposals, tests and certification requirements.

Coordinate product development activities between the supplier of the system and the affected work packages.

Resolve technical problems using accepted methodologies in a cross functional environment.

Bachelor or Master's degree in Mechanical or Aerospace Engineering. AME license is an asset.

Have a minimum of eight (8) to ten (10) years related experience in design, integration, development and certification of Hydro-Mechanical Systems.

Are familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Have experience in providing engineering support to the assembly line / production.

Have strong communication skills, ability to work well in a multi-disciplinary team environment.

Are motivated, organized, autonomous and able to work under limited supervision.

Are proficient in MS Office software and knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2223
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2227 - DESIGNER - INTERIOR CABINET - resume - word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations of the client's Aerospace Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets the company standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.


Must have a bachelor's degree in Mechanical Engineering with a minimum 15 years of relevant experience.

Must be knowledgeable in 3D design with CATIA V5/Enovia PLM.

Must have design experience in cabinet assembly design and/or cabinet installation.

Must have excellent English communication skills written and spoken, French working knowledge would be an asset.

Must have a good command of various software (MS Suite, Outlook, Acrobat, etc.).

Practical knowledge and experience in aircraft structure and completion components would be an asset.

You are well organized and project oriented.

Team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.
 
Job Number: 2227
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 08/17/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2228 - AVIONICS SYSTEMS INTEGRATOR - resume - word doc only

Description:
Responsible, as an Avionics Systems Integrator Specialist, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate and define Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.


University degree in Electrical, Electronics, Software, Aerospace Engineering or equivalent.

Must have at least eight (8) years of relevant experience with the design, development, integration and certification of Avionics systems.

Have a good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Good knowledge of RTCA documents DO-178 and DO-160.

Good knowledge of part FAR25/525 certification process and with the ARP4754 standard.

Experience with civil aircraft and airworthiness authorities.

Systems: Datalink, Flight Management System and Display integration.

Proficient with the use of Microsoft Office software tools to produce presentation and reports.

Ability to work well in a team environment.

Strong communication skills (written and spoken).
 
Job Number: 2228
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2235 - PROJECT ENGINEER - cv - word doc only

Description:
Lead Integrated Product Development Team weekly meetings for your respective work package

Develop, harmonize, maintain and update Schedules for the overall project

Manage the integration of the work package schedule and ensure that it is harmonized with the overall program schedule and across other functions

Identify and report Issues and Risks with mitigation plans

Ensure effective delivery, review and approval of all deliverables in each phase of the project

Ensure compliance to all governing documents and processes

Participate in the problem solving and recovery plans when required to maintain key deliverables' timeline

Lead change-management activities, from initiation to engineering implementation completion, for a given portfolio of changes.
Ensure timely presentation of the changes to all stakeholders for conclusive disposition at various stages of the process;
Prepare information summarizing costs of each change for the Technical Review Board;
Actively monitor and report the progress at all stages of a change%u2019s life-cycle.

Engineering Bachelor degree in Aerospace Engineering or equivalent.

5 years of relevant experience in project management or equivalent.

Superior skills in MS Office including MS Project, PowerPoint and Excel.

Team player with strong communication skills who interfaces well with the many business partners involved.

Must have experience in Project Management and or Project Engineering.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Certification in project Management is an asset

An understanding of aerospace product certification is an asset.

Must have excellent troubleshooting and problem solving skills.

Knowledge of Client engineering system is an asset.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Must have Knowledge on implementation of change management activities.
 
Job Number: 2235
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 08/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2237 - ELECTRICAL WIRING INTERCONNECT SYSTEM - cv - word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Support to Production; respond to RNC.

Provides technical assistance to engineering staff and
contributes to completion of project milestones.

Applies knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.


University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Minimum 11 years of relevant aerospace experience.

Excellent verbal and written communication skills, and computer skills (PC/MS Office) are require.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Must Know the Harness Configuration Process and can develop associated tools.

Must have mastered CATIA V5 3D wiring design electrical workbench suite.

Must Master 2D design diagram and schematics.

Must Master Knowledge of wiring parts qualification.

Must Master Knowledge of the wiring design process.
 
Job Number: 2237
Job Location: Mirabel, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/21/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2240 - REAL TIME SOFTWARE DEVELOPER - AEROSPACE

Description:
Engineering support with the necessary skills to develop, track and troubleshoot real time data collection systems on aero engines.

Candidate must have at least 5 years of relevant experience and have some familiarity/experience with DO-178 and DO-254 standards.

Critical Skills:

Experience troubleshooting and debugging airborne diagnostic systems.

Ability to perform investigations into issues that may span across several different platforms and technologies.

Experience with C/C++

Experience with Embedded Linux Operating System and Linux system administration background.

Experience with Real-time Embedded Systems.

Experience with Wireless GSM.

Ability to come to the correct conclusion during investigation and support it with facts.

Self-Motivated.

Strong Problem solving abilities.

Due to security/clearance factors, candidate must be a US citizen.
 
Job Number: 2240
Job Location: Boston, MA
Rate: 100.00
Per Diem: TBD
Overtime: TBD
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2241 - DYNAMICS ENGINEER - word doc only

Description:
Create, modify, run computer programs to simulate aeroelastic computations.

Post-process the results and make engineering judgment calls.

Produce formal documentation to communicate the analysis and satisfy certification authority and internal clients.

Participate in Ground Vibration Testing (GVT) and Flight Flutter Testing (FFT).

Have a Bachelor%u2019s degree in Aerospace Engineering, Master%u2019s degree is preferred, with at least 5 years of aeroelasticity related experience.

Have previous experience using Nastran in SOL[101, 103, 144, 145, 146]

Have a good understanding of FEM, unsteady aerodynamics, frequency-based data analysis and vibrations of systems.

Have experience with computational Aeroelasticity (RANS-based)

Have an understanding of testing instrumentation and data acquisition.

Have excellent ability to work in a team of Dynamics and/or other disciplinary engineers.

Have good analytical thinking, problem solving, and communication skills (both written and verbal) and ability to work under.

Bilingual (French/English).
 
Job Number: 2241
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2243 - PNEUMATICS SPECIALIST - cv. word doc only

Description:
Influence the definition of New Aircraft Development Projects within Product Development Engineering as well as supporting Sustaining Programs.

Provide Technical expertise to the Engineering teams, including Strategic Technology and Advanced Design.

Provide direction about Industry trends and identify company needs within the discipline.

Lead or support the Pneumatics Knowledge domain roll-out and knowledge capture & sharing.

Identify, develop and execute development opportunities for discipline members .

Lead or support Systems integration aspects in product development.

Have a Bachelor degree in Mechanical/Aerospace engineering.

Have more than 15 years of engineering experience in the field of Aerospace Pneumatic Systems.

Demonstrate good working knowledge of FAA, EASA, TCCA certification requirements (regulatory Authority delegation is an asset).

Are recognized within the industry for your expertise in Pneumatics.

Have proven leadership skills, work collaboratively in a team environment and possess excellent interpersonal and problem solving skills.

Possess good written and oral communication skills in English. (Knowledge of French is an asset).

Are available to travel on short term assignments as required.

Are proficient with most-used office programs, e.g. MS Word, Excel and Powerpoint.
 
Job Number: 2243
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2244 - FLIGHT DYNAMICS ENGINEER - cv. word doc only

Description:
Conduct aircraft Stability & Control analyses using in-house software.

Support the development and modifications to dynamic flight simulation models.

Perform analyses and write reports that demonstrate aircraft compliance to airworthiness regulations.

Keep abreast of advances in the state of the art and in Regulatory Requirements.

Interface with other internal disciplines and external partners/suppliers to ensure efficient data-flow and decision-making.

Prepare Technical Reports, Test Plans, Requirements Documents, Work Statements and Cost Estimates.

Involve data- and information-exchange with in-house disciplines such as Weights, Flight Controls, Customer Engineering, Airworthiness, Systems, Testing, Production and In-Service Support.

Participate in the planning and execution of flight tests.

Participate in the planning and execution of wind tunnel tests.

Develop, use and maintain in-house software and methods.

Provide support to production and production flight-test for aerodynamic and aircraft handling related issues and non-conformances.

Have a Bachelor%u2019s or Master%u2019s degree in Aerospace or Mechanical Engineering from an accredited university.

Have at least two to five (2-5) years of specialization in aircraft flight dynamics, aerodynamics, stability and control, aircraft handling, and flight simulation.

Have experience with dynamic flight simulations using commercial codes such as MATLAB/Simulink or MatrixX.

Have previous experience with FORTRAN and/or C and/or C++ programming, and the UNIX operating system is an asset.

Have a basic understanding of aerodynamics, aeroelasticity, and aircraft design.

Have a basic understanding of aircraft structures/systems and familiarity with airworthiness regulations.

Proficiency in preparing technical reports and presentations via office-software is a pre-requisite.

This position is a intermediate level in Flight Characteristics.
 
Job Number: 2244
Job Location: Toronto, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2245 - FLY BY WIRE CONTROL LAWS - cv. word doc only

Description:
Evaluate the aircraft/ CLaws behavior against Failure cases with the help of either/or flight test data, desktop simulations, and/or pilot-in-the-loop simulations for all flight modes.

Define and Assess system monitor requirements.

Assess Failures fault tolerances.

Evaluate the CLaws against Failures for certification based either on flight test data, desktop and/or pilot-in-the-loop simulations.

Create and optimize MATLAB scripts for desktop automated simulations or post simulator /flight test data.

Provide support in defining the Failures RSIs (Restrictions/Special Instructions) for flight testing.

Support flight and simulator tests.

Support in defining failure case test procedures for various failure cases.

Document findings in internal and certification reports.

Query the system design and assumptions with regards to the effect of failure cases, and proposed design changes in order to minimize the failure case effect on aircraft handling qualities.


Have a Bachelor or higher degree in aerospace or control systems engineering.

Have a minimum of 3 years of current hands-on industrial experience in the development of Flight control laws.

Must be versed in 'classical' and modern control systems design techniques for SISO and MIMO systems.

Have a good understanding of control law evaluation and linear and non-linear testing procedures.

Have an understanding of aircraft stability and of pilot-in-the-loop control.

Have a good understanding of fixed wing aircraft flight dynamics.

Be proficient in using Matlab as a simulation, aircraft/system modeling and control law development tool.

Should be proficient in programming Matlab scripts.

Must be fluent in written and spoken English.

Must be an innovative team player, self-motivated and able to work independently.
 
Job Number: 2245
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 09/08/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2247 - PROJECT ANALYST - cv. word doc only

Description:
Execute strategic projects for the industrialization BAES team (supported by a Business Case, a Project Plan, a Stakeholders Grid, etc.)

Support different functions (engineering, methods, legal, manufacturing through several BAES sites in some feasibility analysis for strategic projects

Propose Project Governance Model and ensure Governances are in place

Develop visibility and reports from functional status to support Project milestones

Ensure Project milestones are achieved and budget is respected

Prepare and present regular Project updates for management and high management

Conduct special case studies (i.e. financial impacts, projections, scheduling, etc.)

Identify necessary corrective actions to recover project schedule/budget
Activate/operate tools for tracking of deliverables and progress of activities

Must have a Bachelor Degree in Engineering.

Must have a minimum of five (5) years of experience in project management, preferably within an aerospace engineering environment..

Must have excellent organisational skills and able to work toward aggressive deadlines.

Must have extensive experience in project management activities and have good financial knowledge.

Must have Knowledge on implementation of change management activities.

Must have excellent communication skills, both written and verbal in English and French.

Must have excellent troubleshooting and problem solving skills.

Have a PMP Certification (an asset).

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Are very good with communication and soft skills.

Have very good project management skills.

Have leadership and influential skills.

Have a good financial knowledge.
 
Job Number: 2247
Job Location: Montreal, Canada
Rate: 48.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 08/10/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

A&P Mechanic

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a mid-size but rapidly growing company in Seattle, WA that was founded in 2001. They have a new flight test facility in Moses Lake WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

Primary Role: Performing routine and periodic maintenance throughout all phases of flight testing; maintaining quality and safety standards; keeping records; maintaining equipment and supplies.

Secondary Role: Support flight test engineers and ground operations personnel as necessary by helping to install test instrumentation, wiring, and custom manufactured hardware.


Job Duties and Responsibilities:
Perform daily pre and post flight inspections.
Perform routine servicing of aircraft systems.
Perform aircraft systems checks and calibration as required.
Trouble shoot and repair pre and post flight squawks in a timely manner.
Assist in the installation and removal of essential flight test instrumentation hardware and wiring.
Routine removal of panels to route and access flight test instrumentation wires and hardware.
Maintain safe operations and workspace.
Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs.
Knowledge/Skills/Abilities:

Experience in maintenance support related to flight test is desired but not required.
Experience with or willing to learn working in a flight test environment.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:

Education
High School Diploma
Formal training in Aviation Maintenance Technologies or other related field
A & P Certificate or equivalent Certificate
1-5 years minimum experience maintaining commercial and/or regional aircraft
 
Job Location: Moses Lake, WA
Rate: open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: Now
Input Date: 01/16/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Email: smcglinsey@velocity-cs.com
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamicist

Description:
Aerodynamicist with Performance and Handling Qualities (P&HQ)
- Aerospace experience mandatory
Location: Mojave, CA
Duration: Contract 12-24 months
Hourly Rate: up to $85/hr
Overtime Potential
Per Diem if you qualify
Holiday, annual bonus, sick pay, 401k
8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controllability; Performance experience is a plus but majority should come from S&C and flight dynamics.
Transonic vehicle experience required; Supersonic vehicle experience a plus
Experience in reversible flight controls
Experience with SIDPAC toolset a plus
Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Main Purpose of the Role is seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.
Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule
Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
The Structures Company is an AA/EOE.
Job Type: Contract
 
Job Location: Mojave, CA
Rate: up to 85/hr
Per Diem: yes
Overtime: possible
Duration: 12-24 months
Start Date: asap
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C/C++ VxWorks Embedded SWE

Description:
Programming Languages: C, C++, and C# CM Tools: Perforce, GIT, Accurev, Source Integrity Compilers: VxWorks, Unix, Lynx.OS, Visual Studio IDEs: Workbench, Eclipse, Visual Studio Technical
Degree - Electrical, Computer Engineer or Computer Science
Preferred: Experience with VME Bus Programming as well as working with VxWorks board support packages
 
Job Number: 7266799
Job Location: multiple
Rate: Market
Per Diem: Split
Duration: 6-12 months
Start Date: ASAP
Input Date: 10/13/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace CMM Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace CMM Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Surface plate work/inspection
• Inspect supplied product according to the applicable drawing and or work order specifications to verify that it conforms to all design requirements
• Perform repetitive inspection following standardized methods
• Perform receiving inspections, first article inspections, and production inspections
• In-Process Inspection: Visual and/or dimensional inspection of precision machined and sheet metal parts
• Interact proactively with other departments to improve products and reduce cost
• Communicate help resolve quality related issues as they relate to the shops production and Document production non-conformances in accordance with prescribed procedures and processes as required
• Support Quality Management System policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and Lean Manufacturing initiatives
• Work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and CMMs
• Create, maintain and verify CMM programs used for the measurements of manufactured and supplied parts
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements

Basic Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED is required
• Must be knowledgeable of sheet metal fabrication process
• Experienced with the inspection of sheet metal parts
• Able to read and interpret various mechanical drawings and blueprints
• Ability to utilize hand tools for inspection, i.e. micrometers, calipers, scales, gauges and height gauges
• Clear understanding of document control processes
• Ability to relate and interact with staff at all levels of the organization
• Works independently and is self-directed
• Experience with GD&T is desired
• Able to multi-task between production checks and FAIs
• Minimum of 3 years’ of precision mechanical inspection experience required
• Minimum of 3 years of CMM or ROMER/Faro Arm experience required
• At least 3 years’ of practical experience in a launch vehicle/spacecraft hardware integration environment
• Must be able to read and interpret design drawings and CAD models

Preferred Skills and Experience:

• Aerospace precision inspection experience
• ISO 9001 / AS9100 experience
• CMM experience with PC-DMIS software experience
• NC inspection experience with PC-DMIS NC/ CAPPS NC
• Romer Arm experience with Verisurf/ PCDMIS software
• Solid computer skills in Microsoft Word, Outlook and Excel
• DCC (Direct Computer Control) experience
• Statistical process controls experience a plus
• Ability to detect design and drawing flaws
• Ability to read and interpret engineering drawings and specification using ASME Y14.5
• GD&T and skillful use of metrology tools and gauges
• Example: Thread gauge, profilometer, height gauge, calipers, micrometers, etc.

Additional Requirements:

• Must be able to lift up to 25lbs. unassisted
• Must be able to work either 1st Shift (5:00am-3:30pm) or 2nd shift hours (3:30pm-2:00am) based on staffing needs, and overtime as needed
• Must be able to stand for extended periods – 8 hours min
• Must be able to work all shift hours, able to work overtime and weekend as needed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39771
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 08/23/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Aerospace Design Support and Training Instructor/TSI

Description:
PDS Tech is seeking a Aerospace Design Support and Training Instructor/TSI for an open position in Savannah, GA.
In your role, you will:


Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of the Client's products and services.

Essential Functions:
  1. Contributes to planning, developing and coordinating of important engineering projects
  2. Provides specialized technical assistance to team members
  3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  4. Determines and develops own approach to solutions within schedule and cost objectives
  5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
  6. Acts as liaison with representatives outside of the assigned group/area 


Additional Functions:

  • Actively works to improve daily processes and ensures all work meets customer requirements
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned 

As our ideal candidate, you will meet the following requirements:
 

Education and Experience Requirements:


Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Other Requirements:

  • Advanced degree in engineering related field preferred
  • The level of technical skill and abilities appropriate for this grade will be established by each discipline


Unique Skills:



CATIA v5 experienced with 2000+ hours. Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Generative Surfacing a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Established background of instruction or support role. Formal Classroom instruction experience required.

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability. 



 
Job Number: 1610055767
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002MyvjAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Powerplant / APU

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEMs. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.
We are seeking contract and direct hire Aerospace engineers with APU and/or Powerplant experience to work in Seattle, WA. The ideal candidates will have experience working on an aircraft certification program in 14CFR Part 25 Powerplant, APU and/or Fuel Systems.


Varying Responsibilities:
Provide technical guidance in your area of expertise for type certification of a transport category aircraft.
Evaluate certification methods of compliance.
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Participate in ground and flight tests as required.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Occasional international travel may be required.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:
Relevant work experience related to aircraft design, test, and certification.
Experience related to APU and/or powerplant systems and integration with the aircraft.
Experience with 14CFR Part 25 certification, flight and ground test planning and test conduct, and data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Ability to represent the company professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
Consulting and direct hire opportunities available.
 
Job Number: #205-APU
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: No
Duration: LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Lynn Launer
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Lead Design Engineer

Description:
*Looking for 3-5 years of experience leading a team
*CatiaV5 and AutoCad experience
*Conversion with Airline to Cargo OR Modification with Cargo Door Experience
*Experience with STC modifications
*Ability to travel both Domestic and International
 
Job Location: Portland, ORE
Rate: OPEN
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 08/10/2017
Firm Name: AVIATION CONSULTING EXPERTS INC
Attention: Brook
Address: 13901 AVIATOR WAY
City, State: FORT WORTH, TX 76177-4308
Phone: 817/952-9193
Fax Phone: 817/231-0133
Website: www.aviationaces.net

Aerospace Positions

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Program Manager

Description:
Currently seeking full-time and contract Program Managers to fill openings with an aerospace flight test, engineering and certification organization located in Moses, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs.
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a
The Program Managers responsibility consists of supporting management of programs through the program lifecycle to achieve or surpass the capability, schedule, and financial performance of customer programs. This position acts as primary customer contact for a programs status, deliverables and cross-disciplinary technical leadership, across a multitude of external contacts and internal team members to ensure customer requirements and expectations are met. Program Managers may also be responsible for overseeing the similarity review process to ensure aircraft components meet certification requirements.

Duties & Responsibilities
• Communicate with potential client to determine scope of project for desired services, timeline and cost sensitivity.
• Conduct internal reviews to determine program staffing to ensure technical skills are paired with technical needs at the appropriate time.
• Create business proposals including schedule, deliverables, and cost.
• Provide business proposals to potential clients and negotiate terms.
• Partnering with Contracts, finalize business proposals including ensuring contract conditions minimize company risk.
• Develop control systems that accurately measure progress of schedule, risk, and technical performance and with sufficient time for corrective action should issues arise.
• Manage program budget, identify and mitigate potential over-runs before they are realized.
• Manage relationship with client throughout project
• Review component qualifications through similarity comparison to ensure they meet certification requirements.
Requirements
• Four (4) year degree in Engineering or equivalent Technical Program Management experience
• 5 + years of relevant experience
• Working knowledge of Part 25 Requirements and Aircraft Certification process desired.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/30/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Structures Engineer

Description:
We are seeking full-time Aerospace Engineers with Structures experience to join our Flight Test Facilities in Moses Lake with the ability to work rotations in our Seattle offices. If you have 4+ years of experience in Structures, we would like to speak with you.
Job Duties
• Create and review Certification Plans.
• Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
• Review qualification by similarity and/or analysis reports.
• Review system safety documents.
• Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
• Perform Component Drawing Reviews.
• Complete aircraft assembly and installation drawing reviews.
• Participate in Systems Design Reviews.
• Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
• Support Test planning and preparation activities
• Support Pre and Post Flight Briefing.
• Monitor live flight data, typically via telemetry
• Process and Analyze Post Flight data.
• Appropriate the disposition of non-conformances, quality escapes, etc.
• Document flight test design problems for long term fixes.
• Conduct Tlight Test Report Writing.

Requirements
• Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
• 4+ years of aerospace experience.
• Ability to think critically, identify and synthesize important information necessary to inform client deliverable.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
• A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
• Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
• Ability to represent AeroTEC professionally and positively during client interactions and actively build rapport and trust to lead to greater business opportunities for the company.
• Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
 
Job Location: Moses Lake, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Systems Engineer

Description:
Perform requirements management, vendor technical monitoring and guidance, and I&T activities for Guidance Navigation and Control (GNC) spacecraft component hardware.
Duties:
This includes analyzing system requirements to perform hardware component selection, developing component hardware Statement of Work (SOW), analyzing, allocating and decomposing higher level spacecraft requirements to their respective GNC components, monitoring component vendor’s development activities per the SOW and developing test procedures and automated tests of the GNC hardware to verify requirements, support spacecraft I&T activities, perform detailed spacecraft simulations using in house simulation tools, and analyze data to develop performance and functional data reports to support requirements.
Required Capability:
Must have hardware electrical Perl background.
Additional Capability:
Knowledge of Matlab & Simulink is a plus.
 
Job Number: 10013
Job Location: Gilbert, AZ
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12mon+
Start Date: ASAP
Input Date: 07/31/2017
Firm Name: ADVANCED TECHNOLOGY
Attention: Chris Lombardi
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace stress Analysis Engineer(Direct hire)

Description:
Role: Stress Analysis Engineer (aerospace)

Location: Mojave, CA

Required:
• Strong understanding of aircraft performance, systems, and operational requirements
• Experience in aircraft composite fabrication, design, and analysis processes
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
• Strong problem solving, organizational, and communication skills
• A strong knowledge of aerospace technologies and products
• Bachelor of Science in a relevant engineering discipline from an accredited institution or substantial equivalent experience
• Proficiency in 3D CAD
• Ability to work in multiple engineering disciplines on an aggressive schedule
• A minimum of three years of directly related aircraft work experience in the analysis of structural systems using classical and finite element based methods
• Proof of U.S. Citizenship and ability to obtain DOD clearance

Desired:
• FEMAP and Matlab proficiency
• Proficiency in Catia V5 or SolidWorks
• Hands-on composites fabrication and assembly experience
• Rapid prototyping experience
• Aircraft homebuilding experience
• Pilot’s License
• DOD Secret Clearance
• Additional degrees or additional relevant work experience
 
Job Number: 52131
Job Location: Mojave, CA
Input Date: 08/10/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Air Systems

Description:
ECS for interiors/cabin pressure systems; aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Mechanical Systems Design Engineers

Description:
Aircraft Mechanical Systems Design Engineers Needed.

Mechanical Systems Design/Integration (Catia Routing)

PRIMARY RESPONSIBILITIES INCLUDE:
Execute conceptual and preliminary airplane design in a thorough, imaginative, and practical manner, including:

Sizing and layout of airplane configuration, including aerodynamic, control, structure, propulsion, and supporting systems
Assessment of vehicle performance
Estimation of structural loads using computational and analytic technique
Perform design optimization of the primary system elements within given constraints.
Employ analytical, empirical, computational, and experimental techniques to assess subsonic and transonic aerodynamic characteristics of aircraft
Articulate formal design reviews and present design data to internal and external customers.
Requires a BS in Aerospace Engineering or Related Field with 10+ Years
SKILLS REQUIRED:
Candidates will have strong knowledge and practical experience in aircraft design, basic sizing, configuration layout, trade studies,
Experience in aircraft dynamics, and controls;
Experience in structural layout & design of primary load paths
Experience with civil transport airplane systems
Working knowledge of civil airworthiness requirements for transport category airplanes
Knowledge of FAA Part 25 and EASA CS 25 regulations

Note: Ability to obtain/maintain a security clearance may be required.

The Structures Company LLC is an AA/EOE.
 
Job Location: CO
Rate: Open - DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 08/10/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stability & Control Analyst (Performance & Handling Qualities)

Description:
US Persons ONLY -
• 8+ years of experience in Stability and Control: vehicle stability, dynamic stability, controlability; Performance experience is a plus but majority should come from S&C and flight dynamics.
• Transonic vehicle experience required; Supersonic vehicle experience a plus
• Experience in reversible flight controls
• Experience with SIDPAC toolset a plus


Job Title: Aerodynamicist with Performance & Handling Qualities (P&HQ) expertise. Seeking an experienced cross-disciplinary engineer with experiences in aerodynamics and computational fluid dynamics. The candidate will build on an intimate knowledge of all aircraft systems and have the ability to support and develop new project initiatives.

Responsibilities:
• Support event simulation model development and validation of performance, handling qualities, stability, and control criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and P&HQ requirements
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain P&HQ databases for use in analysis during all flight phases
• Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Anticipates and resolves issues by developing standards and guidelines
• Ability to problem solve with a balance of technical product, cost, and schedule


Qualifications:
Professional Requirements
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 8 years of experience in aerodynamics development
• Experiences in wind-tunnel and flight test aerodynamic model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 experience preferred
• Air Data Experience preferred
• Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods
• Applicants must be U.S. persons


The Structures Company, LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Autodesk Inventor Designer/Drafters - Everett WA

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Engineering industry on a permanent or contractual basis.

Keltia Design is in need of a Autodesk Inventor Designer/Drafter to work from our Everett WA.
The job involves modifying some design and draft work on pressure vessels. A minimum of 5 years exp on Autodesk Inventor
This is a short term assignment but there are lots of other opportunities in the pipeline with other projects involving Catia, Solidworks, and Inventor.

-Strong Computer Aided Drafting/Design skills (Autodesk Inventor required).
-Knowledge of industry design and documentation standards.
-Ability to work independently and cross-functionally
-Strong communication and problem-solving skills
-Strong time-management and organizational skills
-Experience adhering to budget and project schedules
 
Job Number: Keltia111417
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: ST
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: KELTIA DESIGN INC
Attention: Vincent
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

Avionics -- Flight Management Systems

Description:
Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They have a growing team of aerospace engineers, technicians, mechanics, and specialist consultants that support multiple programs in the aerospace industry.

We are seeking an Aerospace engineer with avionics experience to join the team in Seattle, WA. The ideal candidate will possess aircraft certification experience with a specialty in avionics systems.

Essential Functions:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Prepare test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to avionic/electrical systems integration and certification. Should include experience with some of the following: Navigation (VOR, DME), FMS, TCAS, TAWS, Communications (VHF etc), Displays, OMS, V&V, Safety, ADS (Air Data System), EICAS, Autopilot, AFCS
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to represent the client professionally and positively during client interactions and meetings.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Number: Seattle
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: Full time and LT
Start Date: ASAP
Input Date: 08/04/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
BUYER / PLANNER - AEROSPACE / DEFENSE | Purchasing/Procurement

Description:
Our client is currently seeking a Buyer/Planner to manage the supply base in order to meet government customer demands.

Summary of Job Scope:

Plans, schedules, releases and manages purchase, orders and work orders as required.
Ensures Government Compliance throughout the procurement process.
Executes/manages Non-Disclosure Agreements (NDA's).
Works with internal and external suppliers to resolve material issues (shortages, emergency customer demands, etc.).
Quotes deliveries for sales requests.
Develops and maintains communication channels between various departments and the
Interface with Supply Chain to maintain the flow of materials to support the customer.
Reviews, communicates and acts upon anticipated delays.
Reviews anticipated shortage reports for future demands.
Reviews, analyzes, and makes changes to supply based on the outcome of monthly meetings.
Participates in capacity review meetings with internal and external suppliers.
Monitor and maintain inventory levels in alignment with business unit goals.
Communicates with IT groups to test changes and updates in the ERP system.
Participate in Continuous Improvement and Lean projects.
Resolves invoice issues, implements engineering changes, and coordinates rework and return purchase orders.
Required Knowledge/Skills:

3-5 years of previous Purchasing and Material Planning experience in a Government contract environment.
Clear understanding of Non-Disclosure Agreement Requirements and Proprietary Data.
Knowledge of ITAR and EAR requirements.
Understanding of Government Contracting; including FAR, DFARS and other government regulations.
Knowledge of sizing, material planning and production scheduling.
Solid knowledge of WISE/Cincom/SAP, particularly MRP related screens.
Solid knowledge of Manufacturing Resource Planning (MRPII).
Solid knowledge of planning functions/roles.
Good communication skill, both verbal and written.
Good detail orientation and organizational skills.
Ability to manage several tasks at the same time.
Intermediate Microsoft Office Suite skills.
Involved in Continuous Improvement projects
Education:

4 year Bachelor's Degree in a relevant field is a plus, or equivalent experience required.
APICS or CPSM/CPM Certification is preferred, but not required.
Duration: Direct Hire

Location: Santa Clarita, CA

Compensation: Highly competitive, including a highly competitive salary, lucrative bonus and comprehensive benefits.
 
Job Number: 359417
Job Location: Santa Clarita, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: Perm
Start Date: ASAP
Input Date: 08/09/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Meredith Jacobson
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer (7 needed)

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year
college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.
3. Minimum 3+ years’ experience utilizing Catia V5 3D modeling software

Knowledge, Skills and Abilities:
1. Ability to create 3D models utilizing CATIA V5.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-011
Job Location: Greensboro, NC
Rate: $50 - 60/hr May pay more DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CHINA - Aero Engine - Chief Design

Description:
Leading Chinese civil aerospace engine development organisation are seeking a high-level Chief Design Engineers to provide consultancy support in Low Emission Combustion & engine compression systems for a new major aero engine development program. (in support of the COMAC C919 / widebody programs)

Design Chief - Low Emission Combustion>>>

Responsibilities:

To formulate the technology development of civil aircraft engine turbine.

To organize the construction of related design system and Test & Verification platform of civil aircraft engine turbine.

To organize the research of civil aircraft engine turbine.

To scheme and conduct the technological cooperation with domestic and foreign research organization in civil aircraft engine turbine.

To organize the application of key technology research and pre-research project.

To provide technological consultation in developing civil aircraft engine turbine.

To train, guide and improve the skills of working team.

Requirements:

15+ years working experience in civil aircraft engine turbine field.

Solid knowledge in turbine aerodynamic, cooling, mechanical and structure theory.

Familiar with key technology of civil aircraft engine turbine..

Priority will be given to those who have the experience of civil aircraft engine turbine design and test.

Priority will be given to those who have the experience of project management and team management or extraordinary achievement.

Design Chief in civil aircraft engine's compression system >>>

Responsibilities:

To formulate the technology development of civil aircraft engine's compression design system, including fan, booster and high pressure compressor.

To organize the construction of related design system and Test&Verification platform of civil aircraft engine's compression system.

To organize the research of design in civil aircraft engine's compression system.

To scheme and conduct the technological cooperation with domestic and foreign research organization of design in civil aircraft engine's compression system.

To organize the application of key technology research and pre-research project.

To provide technological consultation in designing in civil aircraft engine's compression system.

To train, guide and improve the skills of working team.

Requirements:

15+ years working experience in civil aircraft engine's compression system design field

Solid knowledge in compression system design theory.

Familiar with key technology of design in civil aircraft engine's compression system.

Priority will be given to those who have the experience of design and test in civil aircraft engine's compression system.

Priority will be given to those who havethe experience of project management and team management or extraordinary achievement.

Terms>>>

Depending on the individual, the role can be taken up as a full-time / long-term (2-5years) direct hire with the client or part-time (limited hours e.g. 1000 / yr), with a mixture of working in China and regular home breaks. Some remote working can be also possible. Remuneration will be either hourly rate of monthly salary for longterm.
 
Job Number: JO0000000008
Job Location: China
Rate: Various
Duration: Various options
Start Date: Flexible
Input Date: 11/06/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Mill machinist is responsible for producing work in the most efficient manner while meeting the drawing/planning specification /requirements.

Under minimal supervision, sets-up, operates, and adjusts CNC Mill/Lathe machines. Works from drawings and written instructions to create parts. Able to read and interpret CNC programs. May need to make offsets to programs on CNC Machines. Requires knowledge of various metals and of measurements used in the machining process.

May assist and train less experienced machinists.

KEY ACCOUNTABILITIES

• Completes set-ups with minimal supervision/assistance.

• Ability and knowledge of 4th axis mills.

• Responsible for all phases of part operation set-up to achieve first article acceptance.

• Perform and maintain accurate in-process quality inspection and records.

• Identify and recommend process improvements that reduce part quality variation.

• Input data into visual management forms and convey results to management

• Continuously improve processes, procedures, and eliminate waste.

• Maintain continuity among shifts by documenting and communicating actions taken thus far as well as any necessary further steps

• Train/Mentor new incoming machinists and lower level CNC machinists

• And other task assigned by supervisor or management

Qualifications

DESIRABLE EXPERIENCE, CAPABILITIES AND SUCCESS FACTORS


• At least five (5) years experience operation set-up on CNC mills with 4th axis.

• Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.

• Ability to maintain close tolerances (within .0005”) of ID’s and OD’s, roundness, concentricity, squareness.

• Understanding of machine tool accuracies, fixture offsets, and tool offsets.

• Knowledge of cutting tool feeds, speeds, and tool life for aerospace hard turning or milling.

• Ability to follow verbal instructions and interpret blue print and quality requirements.

• Ability to communicate with employees and management in a positive manner.

• Ability to lift a maximum of 50 lbs (over 25 lbs with assistance).

• Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma.
 
Job Number: 358639
Job Location: SImi Valley, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: CTH
Start Date: ASAP
Input Date: 08/09/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Meredith Jacobson
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Cabin Safety Specialist

Description:
Annunciator, emergency lighting, human factors, placards, signage

Aerospace flight and test/certification engineering specialists

Paid Travel
Great Hourly Rates
Direct Deposit
Per Diem
Tax Benefits
Healthcare Options
 
Job Location: Washington
Input Date: 03/27/2017
Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
Attention: Erika
Address: 150 RESEARCH BLVD
City, State: ROCHESTER, NY 14623
Phone: 585/441-9800 x106
Email: erika.legrand@noramtecna.com
Website: www.noramtec.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer III / Rotating Machinery

Description:
Component Product Engineer III / Rotating Machinery

Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 3+ month contract
Shift: 1st Shift

**Candidates must be U.S. Citizens**
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

**Candidates should have 6 to 9 years of experience**

Duties:
-Work with manufacturing suppliers on fabrication of aerospace quality hardware.
-Work with the design, analysis, and operations teams.
-Work effectively with the technical, business and program office team members regarding technical issues and component status.
-Up to 25% travel required.

Skills:
Required:
-Experience working with manufacturing suppliers on fabrication of aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.
-Rotating machinery experience is not required but is beneficial.

Keywords:
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Education:
-BS Engineering or Equivalent BS degree
**Candidates should have 6 to 9 years of experience**
 
Job Number: 7530
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3+ mos
Input Date: 08/29/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Composite Technician (2) - CA

Description:
Chipton-Ross is seeking a Composite Technician (2) for an opening in Long Beach, CA.

RESPONSIBILITIES:
-Maintain high standards of safety, quality and output consistent with the requirements of being a client team member.
-Hand lay-up of composite parts in line with development and production requirements.
-Operate the fiber winding machine to support the fabrication of wound parts.
-Work with and provide input to the development and manufacturing engineers to improve part manufacturability.
-Trim and drill of composite parts in line with drawing requirements.
-Load and unload parts into ovens and ensure cure cycles are correct.
-Use of hand tools for the modifications of composite parts.
-Ability to operate a laser tracking system.
-Use of appropriate PPE when working around parts on the shop floor.
-Support the implementation of the ERP system on the shop floor and recommend changes as required.
-Recommend and implement continuous improvement activities in production methods, equipment performance and team effectiveness.
-Ability to train and lead team members, be willing to lead by example and jump in to help when required.
-Help client do its part to make the world a better place
-Constantly learn new things-and share them with your team members
-Performs other duties as assigned

REQUIRED EXPERIENCE:
-2 years prior experience in composite production is required.
-Knowledge of composite fabrication methods and techniques including filament winding, hand lay-up, compression molding and vartm.
-Experience with oven cure and autoclave cure.
-Demonstrated experience in new product introductions within aerospace, aviation or automotive.
-Knowledge and understanding of lean manufacturing.
-Ability to read and interpret engineering drawings and specifications.
-Ability to use metrology equipment to measure parts such as romer arm and bench inspection equipment.
-Ability and willingness to thrive in a fast-paced, rapidly changing work environment
-Driven, highly motivated, and committed to improvement
-Ability to add something unique and positive to our team
-Generally high level of all-around awesomeness
-Must be able to work all shifts and available for overtime as well as weekends when needed
-Must be able to stand for extended periods - 8 hours minimum
-Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces
-Physically able to handle items weighing up to 40lbs (unassisted)

ADDITIONAL EXPERIENCE:
-Creative problem solver, able to work in multi-disciplinary teams.
-Self-directed with excellent organizational skills and problem-solving skills.
-Ability to work in both R&D and production rate environments.
-Passion for space exploration and a firm belief in the utility of affordable access to space
-Ability to thrive as a 'one person team'

EDUCATION:
"High school diploma or GED
-Certifications or similar within aerospace, aviation or automotive
-Graduated from a technical college or other recognized apprenticeship

WORK HOURS:
2nd Shift, Full-Time

 
Job Number: 164355
Job Location: Long Beach, CA
Rate: Up to $25.00 DOE
Duration: 6 Months
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Technician - 2nd shift | Aerospace

Description:
Responsibilities:
• Trimming and finishing of composite and composite metallic assemblies.
• Assembly of structures including setup, bonding and fastener applications.
• Experience with various types of hand tools or hand-held power tools.
• Read and interpret engineering drawings, an understanding for drawing symbols, flag notes and general notes.
• Use of solvents to prepare surfaces for sealing or assembly.
• Laminate fabrication skills, including prepreg and wet layup.
• Laminate assemblies by determining proper placement of composite materials into molds.
• Prepare parts for bagging, including placement of bleeders, thermocouples, probes and vacuum connections. Check seals on completed bagged parts for leaks.
• Vacuum bag processing, bonding, and oven/autoclave curing.
• Make basic layouts on parts or assemblies in order to establish reference points and to check dimensions using calipers, micrometers, precision scales and torque wrenches.
• Must be able to work per engineering drawings as well as both written and verbal instructions and work with engineers to develop composite hardware fabrication and assembly processes/tooling.
• Layout and measure patterns on epoxy and polyurethane foams, aluminum and wood.
• Cut and shape patterns using planes, shaves, files, sure foams, scrapers, routers, hotwires, mills and lathes.
• Apply sealers, releases, base coats and finish coats using various spray equipment.
• Perform product inspection and rework as required.
Basic Qualifications:
• High School Diploma or GED
• Minimum of 2 years with layup, bonding or assembly of composites
• Experience with composite tooling materials (Prepreg, wet layup)
Preferred Skills and Experience:
• Reaming and honing and/or countersinking of uniform close tolerance holes in proper sequence while using the correct tool for the job (e.g., rivet gun and bucking bar, drill motor, power screwdriver, C-squeeze, ratchet wrench, nut runner).
• Set up assemblies and parts in various types of processing and curing equipment such as an autoclave, oven or platens press in order to obtain desired set and cure.
• Wet Layup methods such as RTM and VARTM.
• Thermal Protection System (TPS).
• Ability to operate a ply cutting machine.
• Ability to operate a laser projector to layout laminated assemblies.
• Ability to operate a laser tracker.
• Apply sealant, alodine, primer, adhesives, and special finishes
Additional Requirements:
• Must be willing to work significant overtime.
• Must be able to lift and carry up to 25lbs
• Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching are generally required to perform the functions of this position.
 
Job Number: 359636
Job Location: Hawthorne, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 6 month's Plus
Start Date: ASAP
Input Date: 08/09/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Meredith Jacobson
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Systems Security Specialist 4

Description:
Computer Systems Security Specialist 4

Location: Centennial, CO
Pay Rate: DOE
Duration: 1 year contract
**MUST have an ACTIVE DoD SECRET CLEARANCE**
**MUST be a U.S. CITIZEN**

PRIMARY DUTIES AND RESPONSIBILITIES:
The Cyber Threat Intelligence Analyst and Liaison is an integral part of the Company Information Security Team. The primary function of the role will be to identify, process, and analyze cyber threats; establishing the extent of the threat, potential impact to the environment, and work with the team to manage the risk.
• Triage, process, and analyze cyber threats originating from Intel feeds and analytical systems.
• Perform detailed analysis of threats, combining sound analytical skills with advanced knowledge of IT and network threats.
• Analyze cyber threat data and correlate with understanding of existing environments.
• Perform post mortem analysis on logs, traffic flows, and other activities to identify malicious activity.
• Reviewing weekly, monthly, and on demand threat intelligence reports.
• Liaise with service providers, ISACs, ISAOs, and enforcement organizations to ensure a continual flow of updated threat data.
• Articulate security issues, analysis, and remediation techniques to peers, leadership, and across business lines.
• Respond to technical security questions and concerns from the business.
• Gather, maintain, and analyze cyber-security data and other key performance indicators for regular executive review.
• Maintain a strong awareness and understanding of the current threat landscape.
• Conduct research on emerging security threats and potential impact.
• Conduct research on and communicate emerging security tools to meet organizational needs.
• Develop and manage security status metrics reports to Leadership.
• Coordinate and conduct special projects as directed by the Company CISO.
• Provide Information Security Incident Response & Assessment Management.
• Perform Information Security Forensics.
• Perform Cyber Investigations.
• Oversee Penetration Testing Service coordination.

REQUIRED QUALIFICATIONS:
• Bachelors Degree in Computer Science, Information Technology, MIS or equivalent.
• 10 years IT experience
• 5 years professional experience working in Information Security in a computer/network/security analyst role monitoring systems.
• Hold and maintain an ACTIVE DoD SECRET CLEARANCE w/ SCI eligibility.
• Demonstrated understanding of the life cycle of network threats, attacks, attack vectors and methods of exploitation with an understanding of intrusion set tactics, techniques, and procedures (TTPs).
• Experience with SIEM systems, preferably SPLUNK.
• Hold a proficient understanding of TCP/IP, common networking ports and protocols, traffic flow, system administration, OSI model, defense-in-depth and common security elements.
• Excellent analytical, problem solving, written, and verbal communication skills.
• Proven ability to effectively communicate technical security requirements across multiple lines of business operations.
• Knowledge of Incident Management Process.
• Hands-on experience with Network IDS/IP system.
• Proven ability to find, evaluate and succinctly summarize and analyze information.
• Experience using common vulnerability detection and discovery tools.
• Experience working in or with an outsourced service organization.

DESIRED QUALIFICATIONS:
• Experience working in Aerospace and/or DoD environments.
• Active interest in cyber security, incident detection, network and systems security.
• Familiarity with cyber-crime and cyber-attacks, responsible groups, motivations and techniques.
• Demonstrated hands-on experience analyzing high volumes of logs, network data (e.g. Netflow, FPC), and other attack artifacts in support of incident investigations.
• Demonstrated commitment to training, self-study and maintaining proficiency in the technical cyber security domain.
• Familiarity or experience in Intelligence Driven Defense and/or Cyber Kill Chain™ methodology.
• Experience with Information Security frameworks (i.e. ISO/IEC 27001, NIST SP 800-53, NIST SP 800-37), and service delivery frameworks (e.g. ITIL)
• Experience with Antivirus/Malware Console management
• Experience with Windows and Linux/UNIX systems.

DESIRED CERTIFICATIONS:
• CISSP – Certified Information Systems Security Professional
• CEH – Certified Ethical Hacker
• ISSAP – Information Systems Security Architecture Professional
• GCIH – Certified Incident Handler (GIAC)
 
Job Number: 7507
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 09/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Director of Customer Service Engineering

Description:

PDS Tech is seeking candidates for Director of Customer Service Engineering for the Regional Jet Program.
This position is located in Nagoya, Japan.



Job Description



The Customer Support Director of Service Engineering is responsible for providing in-service technical support to customer airlines, leasing companies and authorized MROs for the servicing, repair, and continued safe operations of aircraft.  The Service Engineering team supporting the Fleet Management organization is the primary interface to address all reliability and maintainability issues for the fleet.  Additionally the Director of Service Engineering has prime responsibility for the  24x7 Operations Center which provides Customers and MROs with round the clock technical support to resolve AOGs and address performance deterioration which may impact operations as detected through Aircraft Health Monitoring.  Service Engineering will work closely with Design Engineering and Regulatory Authorities to resolve in-service issues and improve fleet performance through the coordination and authoring of Service Bulletins and 8110 Authorized Repairs.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating the team and team structure, implementing work processes and process standards, implementing governance and communication processes, and the technical performance of the group.



 



Scope of Work



Processes



  • Implement the Service Request processes and tools required to receive technical questions from customers, and coordinate and approve a timely, quality response.  Create an archive of technical issues and responses.
  • Review every incoming technical request from each customer for its potential safety implication.  Any potential safety issue will be coordinated with the Fleet Chief who will initiate the Lead Airline Process if required.  The potential safety issue will be input into the 21-3 Continued Airworthiness Safety process.
  • Answer technical questions (e.g. “How does this system work?”, “We want to do [X], what will be the impact and is this acceptable?”, “Please confirm our understanding of the [X] document that the [part description] for our aircraft serial number [123] is part number [xyz]”).  Coordination with Design Engineering and Suppliers as necessary.
  • Provide “fix” or “replace” recommendations based on cost and flow time.
  • Provide structural repair instructions and regulatory approvals (i.e. JCAB, FAA, EASA) for the repair when appropriate (e.g., 8110-9).
  • Participate in the Fleet Improvement Process (FIP) as directed by the MRJ Fleet Chief to identify solutions to chronic reliability performance issues and develop solutions for permanent fixes in both delivered and future production aircraft.
  • Coordinate with Design Engineering and Suppliers as required to solve “in service problems”.
  • Coordinate with Engineering and Suppliers on design changes necessary to retrofit delivered aircraft and improve future production aircraft based upon service experience or potential airworthiness issues identified during fleet operations.
  • With Design Engineering develop bill of material and work instruction content material for the accomplishment of Service Bulletins which is then provided to Service Bulletin technical writers for incorporation in forthcoming fleet Service Bulletins
  • Support the Continued Airworthiness Process, Safety Review Process (SRP) and Flight Safety Review Board.
  • Interact with Field Service and Operations Center (OPC) personnel to assist and address support issues or needs identified by either group.
  • Support AOG and Field Repair teams with on-site engineering support during aircraft recovery operations as requested by the field repair team.


The primary deliverables of Service Engineering include:



  • Completed Service Requests as entered in the Customer Portal in accordance with established KPIs.
  • Repair instructions and regulatory approvals for repairs not covered by existing approved repair manuals (SRM).
  • Updates to the Fleet Improvement Team Digest based upon progress and status both Safety and Non-Safety SRP’s.
  • Service Bulletin work instruction content material.
  • Service Letters that provide important technical and maintenance information to the airlines.  Note, a Service Letter does not authorize an airline to modify an airplane (it is not a regulatory approved document.) 
  • Skilled employees that will form the Service Engineering team, staff the Operations Center, and staff the Field Service team.


Job Requirements:



The Central Service Engineering functions will be performed primarily in Komaki and an Operations Center that is staffed and directly interfaces with Service Engineering will be staffed 24/7/365 to support operations worldwide.



 




    Education/Experience and Skills:



    1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
    2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Service Engineering functions to commercial airline customers.
    3. Candidates must have Regulatory (FAA/EASA/JCAB) coordination experience.
    4. Candidates must have skills and experience managing Suppliers.

     
    Job Number: 1710063873
    Job Location: Nagoya,
    Duration: 24 months
    Input Date: 01/19/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lucinda Contreras
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKH0AAO&URLSource=cjhunter

    Director of Technical Publications

    Description:

    PDS Tech is seeking candidates for Director of Technical Publications for the Regional Jet Program.
    The primary work location will be Seattle, Washington, USA, with travel required to Nagoya, Japan.



    Job Description



    The Customer Support Director of Technical Publications is responsible for the Development, Verification & Validation, Certification Approval, Publication and Revision of all maintenance and repair documents for the program to ensure the aircraft can be maintained in an airworthy condition as designed by Engineering and approved by regulatory authorities.  Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team (including 3rdparties required to supplement staff) and team structure, implementing governance and communication processes, and the performance of the group.



     



    Scope of Work



    Processes:



    • Implement the processes and tools required to author, publish and revise all maintenance and repair documents in accordance with industry standards.
    • Manage the document development process to meet program schedule milestones.
    • Establish and manage 3rd parties required to supplement the staff.
    • Coordinate with Design Engineering and Suppliers to obtain technical information and content required to meet industry standards for document scope and content.
    • Author and publish all Instructions for Continuing Airworthiness (ICA) documents (see Deliverables and Products section for a list of ICA documents) and other industry standard manuals required for maintenance and repair of the fleet.
    • Establish the document revision process required to incorporate changes from Design Engineering as well as Customer Originated Change (COC) requests (e.g. Engineering Orders, SB accomplishment, implemented Supplemental Type Certificates, etc.).
    • Review and accept Component Maintenance Manuals (CMM) produced by Partners.
    • Author and publish Service Bulletins originating from the Airplane Change Process


    “Authoring” as described above include the development of maintenance procedures, safety warnings, cautions & notes, access identification, remove/replace instructions, and test procedures.  All documents produced by this group’s activities must conform to strict formatting and publishing standards as defined by ATA S1000D and other adopted industry specifications.  Documents are revision controlled to include highlight sheets, list of effective pages, revision bars, and distributed in both PDF and SGML (selected documents only) upon approval by the required regulatory authority as applicable.



     



    The primary deliverables of Technical Publications include:



    • Service Bulletins
    • Maintenance Tips
    • Aircraft Maintenance Manual (AMM)
    • Fault Isolation Manual (FIM)
    • Aircraft Recovery Manual (ARM)
    • Standard Wiring Practice Manuals (SWPM)
    • Wiring Diagram Manual (WDM)
    • System Schematic Manual (SSM)
    • Structural Repair Manual (SRM)
    • Aircraft Illustrated Parts Catalog (AIPC)
    • Corrosion Prevention Manual (CPM)
    • Non Destructive Test Manual (NDTM)
    • Maintenance Planning Document (MPD)
    • Maintenance Review Board Report (MRBR)
    • Maintenance Task Cards (MTC)
    • Illustrated Tool & Equipment Manual (ITEM)
    • Maintenance Facilities and Equipment (MFEPM)
    • Component Maintenance Manuals (CMM) –  Proprietary Parts


    The Technical Publications function will be performed both in Seattle, WA and Komaki, Japan.  Third parties will be used for the initial document creation process as the permanent team is formed and capabilities are implemented.



     






        Expected Education/Experience and Skills:



        1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
        2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in senior leadership positions providing Technical Publication functions to commercial airline customers.
        3. Candidates must be familiar iSpec2200 and S1000D and have participated in technical publication Industry Standards groups.
        4. Candidates must have skills and experience managing Suppliers.

         
        Job Number: 1710063876
        Job Location: Seattle, WA
        Duration: 24 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Lucinda Contreras
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHPAA4&URLSource=cjhunter

        Director, Spare Parts Management

        Description:
        Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Spare Parts Management, Customer Support Division for the Regional Jet Development Program. 
        This position is located in Nagoya, Japan.  

        In this role, you will be responsible for managing a profitable, world-wide spare parts service for the Aircraft. Spare parts services will include but not be limited to parts provisioning and sales, tailored parts pooling services, lease and repair services. This leader is also responsible for establishing the processes and organization necessary to create and deliver these services.  Processes will include provisioning planning, inventory planning, setting up of warehouse and distribution channels, export/import control, customer AOG and sales support, quality management, and others as necessary.  These services should meet the expectations of customers ensuring the aircraft is cost competitive and can be maintained in an airworthy condition as designed by Engineering and approved by regulatory authorities. Responsibilities include but are not limited to establishing deliverable commitments, establishing work priorities, creating and managing the development processes, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


        The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

        Scope of Work
        Develop the following processes and capabilities related to spare parts management:

        •   Phased Provisioning          

          • Recommended Spare Parts List (RSPL)

        •   Spares sales        
          • Proprietary and partner parts
          • Parts catalog
          • Quotation

        •   Leasing Services & management
        •   Repair Services & management
        •   24/7/365 – AOG Desk        
        •   Inventory planning & demand forecasting
        •   Inventory management for new parts & Company repairable assets  
        •   AS 9120 certified Logistics Service Centers     
        •   Management of 3PL (3rd Party Logistics) warehouse and distribution provider
        •   Supplier Management
        •   Customer account management
        • Spares Engineering management to oversee part interchangeability and kitting services
        • Tailored MRO and spares support programs                 
        • Handling of dangerous materials                     
        • Insurance Parts management

        The Spares management function will be performed in Nagoya, Japan.  Third parties will be used for logistics in Japan, North America and Europe.  Company will use SAP as their ERP system.  This system will control spares ordering and fulfillment processes.  Familiarity with SAP is a benefit.  The Spares team has partnered with The Boeing Company - Spares Engineering to develop customer provisioning data and inventory recommendations.
         

        Expected Education/Experience and Skills:



        1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
        2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing spare parts management functions to commercial airline customers.
        3. Candidates must have skills and experience managing Suppliers.

         
        Job Number: 1710068576
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Lucinda Contreras
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSgAAK&URLSource=cjhunter

        Director, Training & Flight Operations

        Description:
        Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
        This position is located in Nagoya, Japan.  

        In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



        • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
        • Development, verification/validation and certification of flight operations manuals
        • Flight Operations Engineering support to Company's customers


        Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


        Work Location
        The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

        Scope of Work
        Specific Training responsibilities include:

        • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
        • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
        • Development and maintenance of training documentation for each course offered
        • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
        • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
        • Obtain regulator certifications such as OSD, FSB, etc.
        • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
        • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

         
        Specific Flight Operations Support responsibilities include:

        • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
        • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
          • Airplane Flight Manual (AFM)
          • Flight Crew Operating Manual (FCOM)
          • Quick Reference Handbook (QRH)
          • Weight & Balance Manual (WBM)
          • Master Minimum Equipment List (MMEL)
          • Dispatch Deviation Guide (DDG)
          • Flight Crew Training Manual (FCTM)
          • Cabin Crew Operating Manual (CCOM)
          • Aircraft Characteristics for Airport Planning (AC)



        • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
        • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
          • Performance Engineers course
          • Weight & Balance course

        • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
        • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
        • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
        • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

        Expected Education/Experience and Skills:



        1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
        2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
        3. Commercial pilots license preferred.
        4. Candidates must have skills and experience managing Partners and Suppliers.

         
        Job Number: 1710068573
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Chad Dunavant
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        ECS Flammability

        Description:
        Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

        The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

        We are looking for an ECS Engineer with a focus on Flammability

        Responsibilities:

        Coordinate system test and certification requirements.
        Author flight test and ground test specifications.
        Support flight test and ground test activities.
        Analyze test data and evaluate system operation.
        Verifying Comportment ventilation and drain from the view point of fire marshal
        Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
        Prepare test reports.
        Domestic and occasional international travel is required.
        Requirements:

        Flammable Fluid Test, Report, Document, Design for company and certification
        Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
        Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
        Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
        Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
        If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

        Candidates must have legal authorization to work in the United States, Canada or Mexico
         
        Job Location: Seattle, WA
        Per Diem: Possible
        Overtime: Possible
        Start Date: ASAP
        Input Date: 10/06/2017
        Firm Name: VELOCITY CONSULTING SOLUTIONS
        Attention: Miguel Calderon
        Address: 20306 15TH AVE NE STE A
        City, State: SHORELINE, WA 98155
        Phone: 206/812-1061
        Website: www.velocity-cs.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        ECS System Engineer - 1 yr.+ Contractor

        Description:
        Keltia Design, Inc. is a technical support services company in the Seattle area supplying recruitment and training to customers in the Aerospace industry on a contractual and permanent basis.

        I am recruiting for a ECS System Design Engineer 1+ yr. Contract
        ECS System Design Engineer 1+ yr. Contractor

        Must have 5+ years of experience on Boeing or preferably Airbus Mechanical Systems
        Knowledge of oxygen/ECS /fire protection and safety systems, wire harness, and cable assembly required. Also experience with CATIA V5 and AutoCAD are required.

        The successful candidate will create and check detail, assembly and installation designs/drawings, engineering orders and substantiation documents.


        Correspondence by e-mail is best as it is difficult to respond to all phone calls.

        If interested, please include your desired rate and availability on your response.

        Thank you
         
        Job Number: Kel08217
        Job Location: ORE
        Rate: DOE
        Per Diem: Yes
        Overtime: Yes
        Duration: 1 yr+
        Start Date: ASAP
        Input Date: 08/12/2017
        Firm Name: KELTIA DESIGN INC
        Attention: Mary
        Address: 2615 W CASINO RD UNIT 1A
        City, State: EVERETT, WA 98204
        Phone: 206/368-9812
        Fax Phone: 206/237-8950
        Website: www.keltia-design.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Applications Engineer

        Description:
        Electrical Applications Engineer

        Location: Savannah, GA
        Pay Rate: $58/hr - $63/hr
        Duration: Long Term Contract
        Shift: First
        *Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project*

        Unique Skills:
        -Experience with Autocad required; Aerospace experience required.
        -Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required.
        -Be Familiar with CFR 14 Part 25 and AS50881.
        -Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
        -Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

        Job Description:
        -Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        -5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

        Position Purpose:
        -Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

        Principal Duties and Responsibilities/Essential Functions:
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
        4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions:
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned

        Other Requirements:
        1. Advanced degree in engineering related field preferred
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
         
        Job Number: 7059
        Job Location: Savannah, GA
        Rate: 58.00-63.00
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Input Date: 10/06/2017
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        Electrical Applications Engineering

        Description:
        UNIQUE SKILLS
        Experience with Autocad required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

        JOB DESCRIPTION
        Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

        PRINCIPAL DUTIES AND RESPONSIBILITIES
        ESSENTIAL FUNCTIONS
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

        ADDITIONAL FUNCTIONS
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned

        OTHER REQUIREMENTS
        1. Advanced degree in engineering related field preferred
        2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
         
        Job Number: 17-736-93664
        Job Location: Southeast
        Rate: $58.00 to $63.00/per hour
        Per Diem: Split
        Overtime: Possible
        Duration: 6 mths +
        Start Date: ASAP
        Input Date: 01/08/2018
        Firm Name: AGENTE TECHNICAL
        Attention: Alexa Bui
        Address: 714 CENTERPARK DR STE 140
        City, State: COLLEYVILLE, TX 76034-2852
        Phone: 972/415-4545
        800 Phone: 866/758-2494
        Fax Phone: 866/717-5927
        Email: abui@agentetech.com
        Website: www.agentetech.com

        Electrical Applications Engineering Consultant

        Description:
        PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
        In your role, you will:

         

        Unique Skills:



        • Experience with Mentor Graphics L-Cable required. Aerospace experience required.
        • Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881.
        • Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
        • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



        Principal Duties and Responsibilities: Essential Functions:

        • Contributes to planning, developing and coordinating of important engineering projects
        • Provides specialized technical assistance to team members
        • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
        • Determines and develops own approach to solutions within schedule and cost objectives
        • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        • Acts as liaison with representatives outside of the assigned group/area


        Additional Functions:

        • Actively works to improve daily processes and ensures all work meets customer requirements
        • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        • Performs other duties as assigned Other

        As our ideal candidate, you will meet the following requirements:
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

        Education/Experience:

        • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

         
        Job Number: 1610052916
        Job Location: Savannah, GA
        Per Diem: No
        Duration: 6 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Clyde Callwood
        Address: 3922 COCONUT PALM DR STE 100
        City, State: TAMPA, FL 33601
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tKymAAE&URLSource=cjhunter

        Electrical Applications Engineering Contractor

        Description:
        PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
        In your role, you will:

         

        Unique Skills:



        Experience with Autocad required.

        Aerospace experience required.

        Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



        Position Purpose:
        Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

        Principal Duties and Responsibilities:

        Essential Functions:

        1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions:
        1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


        As our ideal candidate, you will meet the following requirements:
        • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

        Education/Experience:

        • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
        • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

        POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

        PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
         
        Job Number: 1710063879
        Job Location: Savannah, GA
        Per Diem: No
        Duration: 6 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Clyde Callwood
        Address: 3922 COCONUT PALM DR STE 100
        City, State: TAMPA, FL 33601
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Engineer

        Description:
        Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
        Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


        JOB RESPONSIBILITIES

        • Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
        • Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
        • Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
        • Typically focuses on existing products or processes.
        • Liaises with drafters, technicians, and others to contribute to project completion.
        • Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
        • Performs other related duties as required.



        MINIMUM REQUIREMENTS:
        • Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
        • Aerospace industry experience is strongly preferred.
        • Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
         
        Job Location: Everett, WA
        Rate: Negotiable
        Per Diem: Possible
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 12/01/2017
        Firm Name: AMERICAN CYBERSYSTEMS
        Attention: Andrew Walbert
        Address: 1750 112TH AVE NE STE C228
        City, State: BELLEVUE, WA 98004
        Phone: 425/605-2321
        Fax Phone: 425/558-0688
        Website: www.acsicorp.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Harness Installation Engineer

        Description:
        Electrical Harness Installation Engineer
        Savannah, GA
        Rate: $58-$63

        Unique Skills:

        Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

        Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

        Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

        Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned
         
        Job Number: 7231
        Job Location: Savannah, GA
        Rate: $58-$63
        Per Diem: Yes
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 10/03/2017
        Firm Name: INCONEN CORPORATION
        Attention: Cathy O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Electrical Harness installation Engineer

        Description:
        UNIQUE SKILLS
        Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

        JOB DESCRIPTION
        Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

        PRINCIPAL DUTIES AND RESPONSIBILITIES
        ESSENTIAL FUNCTIONS
        1. Contributes to planning, developing and coordinating of important engineering projects
        2. Provides specialized technical assistance to team members
        3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
        5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
        6. Acts as liaison with representatives outside of the assigned group/area

        ADDITIONAL FUNCTIONS
        1. Actively works to improve daily processes and ensures all work meets customer requirements
        2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
        3. Performs other duties as assigned
         
        Job Number: 17-676-94842
        Job Location: Southeast
        Rate: $58.00 to $63.00/per hour
        Per Diem: Split
        Overtime: Possible
        Duration: 6 mths +
        Start Date: ASAP
        Input Date: 10/17/2017
        Firm Name: AGENTE TECHNICAL
        Attention: Alexa Bui
        Address: 714 CENTERPARK DR STE 140
        City, State: COLLEYVILLE, TX 76034-2852
        Phone: 972/415-4545
        800 Phone: 866/758-2494
        Fax Phone: 866/717-5927
        Website: www.agentetech.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Engineer I / entry level / EMI CA URGENT

        Description:
        159926/4410
        Engineer I / entry level CA URGENT
        Irvine CA
        24-42/hr DOE

        Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions for technical project assignments using fundamental principles of mechanical, electrical, packaging, or other engineering disciplines.


        Please send resumes in below category with 0-3 years of experience, preferable 0-1 year of experience

        .Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. Professional entry level position. May have limited prior industry experience or have worked with direction in student internship programs. 2. Fundamental knowledge of engineering domain principles, concepts, and techniques. 3. General knowledge of industry products, customers, and related legal/regulatory requirements. 4. Fundamental knowledge of and use of basic engineering design and analysis tools (e.g. computer-aided design programs). Learns and utilizes specialized engineering databases; may require programming skills. 5. Develops familiarity with products and customer specifications and standards applicable to assigned product line or system. 6. Ability to communicate status of technical tasks and actions taken with clarity and precision. 7. Ability to work with general direction and instruction regarding the scope of assignments; determines the priority and order of assignments; and applies judgment in selecting procedures and techniques. 8. Ability to read, analyze, and interpret technical journals and reports. Ability to present findings and information in both formal meetings and informally within and across Parker teams.


        1. Aerospace engineering
        2. Testing domain
        3. Mechanical/Electrical/Aerospace/Computer engineering.
        4. EMI/Qualification testing

        Must be open to 2nd & 3rd shifts.
         
        Job Number: JK-4410
        Job Location: Irvine, CA
        Rate: 24-42/hr DOE
        Duration: 12 month contract
        Start Date: Must be open to 2nd & 3rd shifts.
        Input Date: 09/06/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Engineer II / entry level / Hydraulic / Control Systems / Technical Writing CA URGENT

        Description:
        159850/4405
        Engineer II
        Irvine CA
        30-50/hr DOE
        2-4 year experience


        Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc).

        1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.

        2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.

        3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.

        4. General knowledge of other related engineering and technical areas.

        5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

        · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.

        · Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

        * Special Requirements:

        the emphasis should be on (in order of priority):
        - BS Mechanical Engineering (or Aerospace or similar)
        - Hydraulic experience
        - Control systems experience
        - Test experience
        - Technical Writing (procedures / reports)

        2-4 years exp.
         
        Job Number: JK-4405
        Job Location: Irvine, CA
        Rate: 30-50/hr DOE
        Duration: 6 month contract
        Input Date: 09/06/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        Engineer Mechanical - 4- SCI/SSBI Clearance

        Description:
        PDS Tech, Inc. is seeking a candidate for the Engineer Mechanical - 4- SCI/SSBI Clearance position located in Redondo Beach, CA.
         

        Candidate will be responsible for performing thermal analysis on space-based hardware using industry standard thermal analysis software/tools. Must possess an understanding of the basic principles of radiation and conduction heat transfer in conjunction with environmental heating effects and parameters associated with spaceflight applications. Responsibilities



        include development of active and passive thermal designs using numerical solutions and hand calculations, preparation of technical documents and PowerPoint presentations, establishing test parameters for thermal testing, test monitoring and correlation of test results to model predictions. Demonstrate the skill and ability to perform professional tasks. Ability to collaborate in and lead in team environment. Ability to prioritize and adjust tasks to accomplish the project result.



        Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously. Ability to comprehend and analyze complex problems and develop solutions.




         


        Qualifications
         

        Basic Qualifications:



        9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.



        along with experience using thermal analytical tools and testing procedures.



        Requires in-scope SCI/SSBI clearance.




        Preferred Qualifications:



         MS or PhD in Mechanical or Aerospace Engineering with design, analysis and integration experience of spacecraft thermal systems.



        Experience using thermal analysis tools (SINDA/G, SINDA/FLUENT, TSS, Thermal Desktop, Flotherm) and aerospace standard design tools (NX, CATIA).




         
        Job Number: 1710069953
        Job Location: Redondo Beach, CA
        Duration: 6 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Phil Press
        Address: 370 N WESTLAKE BLVD STE 120
        City, State: WESTLAKE VILLAGE, CA 91362
        Phone: 805/418-9862
        800 Phone: 866/458-4322
        Fax Phone: 805/418-9866
        Email: cecjwestlake@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CogoAAC&URLSource=cjhunter

        Engineering Design 1/2 (3) - FL - C

        Description:
        RESPONSIBILTIES:
        Designs major components or major portions of a functional system to develop or improve products and facilitate manufacturing operations. Develops basic data and makes preliminary layouts, sketches, and notes necessary to present design proposal. Investigates pertinent design factors such as ease of manufacture, availability of materials and equipment, interchangeability, replace ability, strength-weight efficiency, and contractual specification requirements and cost. Coordinates with other organizations affected by design development. Makes layouts of complex assemblies and details parts of devices, mechanisms, and structures. Checks completed layouts and drawings for clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning. Identifies design errors, omissions, and other deficiencies, and recommends revisions and/or improvements in design layout to responsible engineers or designers.
        Design Engineer: Work will involve aerospace mechanical, pneumatic, hydraulic, and electrical subsystem test equipment design.

        REQUIRED EXPERIENCE:
        Strong CAD skills, proficient in MS Office, must be willing to relocate to Palmdale in approx. 1-2 years.
        Level 1 (2 positions): 0 Years with Bachelors in Science Mechanical Engineering
        Level 2 (1 Position): 2 Years with Bachelors in Science Mechanical Engineering; 0 Years with Masters Mechanical Engineering.
        Preferred Qualifications:
        Knowledge of test equipment design a plus, knowledge of aerospace subsystems a plus.

        EDUCATION:
        Bachelors in Science Mechanical Engineering, or Master's degree.

        MISCELLANEOUS:
        Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

        HOURS:
        9/80 workweek

         
        Job Number: 162898
        Job Location: Melbourne, FL
        Rate: $28 to $40.00 DOE
        Duration: 9-12 months
        Input Date: 01/20/2018
        Firm Name: CHIPTON ROSS
        Attention: Melody Mullins
        Address: 343 MAIN ST
        City, State: EL SEGUNDO, CA 90245
        Phone: 310/414-7800 X286
        800 Phone: 800/927-9318
        Fax Phone: 310/414-7808
        Email: mmullins@chiptonross.com
        Website: www.chiptonross.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        External Loads Engineer

        Description:
        Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

        Duties and Responsibilities:
        Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

        Education, Work Experience, Certification and/or Licensure:
        1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
        2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
        3. Excellent communication skills both written and verbal
        4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

        Knowledge, Skills and Abilities:
        1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
        2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
        3. Must be proficient in generating documentation to support certification efforts related to external loads.
        4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
        5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
         
        Job Number: 28-014
        Job Location: Greensboro, NC
        Rate: $62-$72/hr May pay more DOE
        Per Diem: YES
        Overtime: YES
        Duration: 1 YR+
        Start Date: ASAP
        Input Date: 10/30/2017
        Firm Name: PRECISION PERSONNEL INC
        Attention: Matt
        Address: 600 CLEVELAND ST STE 700
        City, State: CLEARWATER, FL 33755
        Phone: 727/449-0600
        800 Phone: 877/600-2333
        Fax Phone: 727/449-0627
        Website: www.precisionpersonnel.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        External Loads and Dynamics Engineer

        Description:
        External Loads and Dynamics Engineer
        Full Time position
        Greensboro, NC

        US Citizen, Or Greencard holder.
        Medical and dental
        401k with match
        15 holidays
        Time off during week of Christmas
        Bonus potential

         
        General Summary: 
         
        Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.
         
        Duties and Responsibilities:
        Applicant will define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.
         
        Qualifications
         
        Education, Work Experience, Certification and/or Licensure:
        BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
        Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience, including static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements.  Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
        Knowledge of, and experience with, dynamic aeroelastic analysis is desirable
        Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable  
        Strong knowledge of CFD principles and CFD-based modeling , along with wind tunnel test data usage for Loads analysis, is required
        Proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required
        Knowledge of mass properties principles as they relate to loads analysis required.
        Knowledge and experience with cable-driven / mass-balanced flight control systems required
        Experience with flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis
         
         
         
         
         
         
         
         
        Job Details
        City
        Greensboro
        State
        North Carolina
         
        Job Location: Greensboro, NC
        Rate: "open"
        Duration: Full Time
        Start Date: asap
        Input Date: 08/18/2017
        Firm Name: STRUCTURES COMPANY LLC
        Attention: Mark Sharp
        Address: P O BOX 2278
        City, State: SEAL BEACH, CA 90740
        Phone: 714/823-3000
        Website: www.thestructurescompany.com

        Fire Protection Engineer -- Aerospace

        Description:
        Job location: Overseas

        Contact:
        Morgan at (585) 441-9800 x104 or
        Nicholas at (585) 441-9800 x126


        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Overseas/International
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Morgan or Nicholas
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x104 or x126
        Email: morgan.ricklefs@noramtecna.com; nicholas.salsedo@noramtecna.com
        Website: www.noramtec.com

        Flight Controls Engineer

        Description:
        PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

         
        •  
        • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
        • Applicable coursework or coop/intern experience to this position desired.
        • Working knowledge of generic CAD design tool processes is desired.
        • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
        • Experience with Kinematics in CATIA
        • Flight Controls Systems design experience a plus
        • Must have excellent verbal communication and presentation skills.
        • Proficient with Microsoft Office applications including Word and Excel.
        • Professional demeanor, troubleshooting and organizational skills are necessary.
        • International experience desirable. 
        • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

         
        Job Number: 1610045561
        Job Location: Nagoya,
        Duration: 36 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Chad Dunavant
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000003BKTAA2&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Flight Sciences (Aircraft Performance)

        Description:
        Our client is a flight test, engineering and certification organization that provides services to aircraft modifiers and OEM’s is seeking Flight Sciences Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

        Seeking contract or full-time engineers to join the teams in Seattle and Moses Lake with at least five years' experience in flight sciences, including Aircraft Performance.

        Essential functions:

        Define and validate flight test specifications
        Perform data review and analysis for verification of aircraft level requirements
        Utilize flight simulation models and data
        Support ground and flight test activities
        Prepare flight test reports
        Desired Qualifications:

        Experience with FAA Part 25 or Part 23 aircraft certification
        Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
        A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
        Ability to represent the client professionally and positively during client interactions and meetings.
        Bachelor or advanced degree in Aerospace Engineering.
        If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.
         
        Job Location: Seattle, WA
        Per Diem: Possible
        Overtime: Possible
        Start Date: ASAP
        Input Date: 08/21/2017
        Firm Name: VELOCITY CONSULTING SOLUTIONS
        Attention: Miguel Calderon
        Address: 20306 15TH AVE NE STE A
        City, State: SHORELINE, WA 98155
        Phone: 206/812-1061
        Website: www.velocity-cs.com

        Flight Sciences -- Performance

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Sciences -- Stability & Controls

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test -- Troubleshooting Processes

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Flight Test Controls -

        Description:
        Johnson Service Group is seeking a Flight Test Controls for a 15 month contract in West Palm Beach, FL!

        The applicant will need to work in West Palm Beach, FL for the first four to six months of the assignment in order to become familiar with the aircraft and the test requirements. The applicant will then likely be expected to move to Patuxent River, MD as the program shifts testing to be conducted from there.

        Description:

        Plan, conduct, manage and report flight control systems and handling qualities flight tests.
        Test planning function involves determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
        These details are written into published test plans. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
        Large volumes of gathered flight data are processed, analyzed, and reported. These results are written into published test reports.
        Work closely with the handling qualities and flight controls design engineers to become familiar with the flight control system hardware components and software, specifically control law design. Quickly identify problems on the test aircraft, troubleshoot the issue, and work with design engineering to implement a solution.
        Utilize Mat lab to analyze flight test data and work with control laws.
        Fly on board experimental aircraft to conduct test flights, modify software flight test variables, and collect data.
        Experience:

        Minimum of a Bachelor's degree in Aerospace Engineering, Mechanical or Electrical Engineering. Master’s degree a plus.
        Minimum of 4 years of fixed/rotary wing flight control systems and handling qualities flight test engineering experience.
        Fly-By-Wire experience preferred. Analytical thinking, troubleshooting, problem solving, and communication--written and oral. Technical writing.
        Matlab/Simulink, Microsoft Office applications. General aviation knowledge; pilot license is preferred.


        Additional Notes

        The job involves significant teamwork and coordination with flight test co-workers in a variety of disciplines (pilots, mechanics, inspectors, instrumentation and data technicians), qualification or certification authority representatives and subject matter expert design engineers. The applicant will also team with design engineering by participating in simulation testing. Good interpersonal skills are imperative. Personal flexibility is required to occasionally support unusual working hours.
         
        Job Number: 356488
        Job Location: West Palm Beach, FL
        Rate: $39hr
        Per Diem: yes
        Overtime: possible
        Duration: 15 months
        Start Date: asap
        Input Date: 10/19/2017
        Firm Name: JOHNSON SERVICE GROUP
        Attention: Rich Martinsen
        Address: 950 S BASCOM AVE STE 2122
        City, State: SAN JOSE, CA 95128
        Phone: 408/728-9510
        800 Phone: 866/656-0539
        Fax Phone: 408/271-2701
        Website: www.jsginc.com

        Flight Test Equipment -- Management/Coordination

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test Management

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Flight Test Project Engineers

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        GC - HANDLING QUALITIES/CONTROL LAWS - Grade 07

        Description:
        JOB DESCRIPTION
        The job entails Control Law (CLAW) algorithm development, requirements documentation and flow down, test vector development and implementation, handling qualities evaluations of CLAWS, and evaluation of reversionary modes & failures.
        Education: BS Aerospace, Electrical or Mechanical Engineering w/5+ years of experience in CLAW Design and Analysis

        QUALIFICATIONS
        The candidate must have a thorough knowledge of CLAW design, linear and non-linear analysis techniques, time and frequency domain analysis, and an understanding of flight dynamics. Experience and knowledge with Matlab/Simulink is required. Experience with helicopter flight dynamics simulation modelling is a plus. Good familiarity with modern flight control law architectures including Model Following fly-by-wire CLAWs is a must. Candidate should be familiar with DOORs and have experience with System Integration Lab (SIL) formal testing of control laws.

        COMMENTS
        Strong communication skills and the ability to work in a team environment is required.
        U.S. citizenship required.
         
        Job Number: 17-760-1457
        Job Location: Northeast
        Rate: OPEN
        Per Diem: Split
        Overtime: Possible
        Duration: 6 mths +
        Start Date: ASAP
        Input Date: 08/08/2017
        Firm Name: AGENTE TECHNICAL
        Attention: Alexa Bui
        Address: 714 CENTERPARK DR STE 140
        City, State: COLLEYVILLE, TX 76034-2852
        Phone: 972/415-4545
        800 Phone: 866/758-2494
        Fax Phone: 866/717-5927
        Website: www.agentetech.com

        Ground Test Engineer

        Description:
        "PDS Tech is seeking a Materials and Process Engineer for an open position in Stratford, CT

        Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems. This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure. Test programs typically involve main and tail rotor whirl tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight. Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft.  A large portion of the job is oversight of supplier performed component qualification efforts.
        Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems.



         




        Skills Required:
        - Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
        - Ideal candidate will have a minimum of a Bachelor of Science in Mechanical or Aerospace Engineering and 12+ years of relevant experience.
         

         
        Job Number: 1610052324
        Job Location: Stratford, CT
        Per Diem: No
        Duration: 24 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Ryan Bushey
        Address: 50 FOUNDERS PLAZA STE 304
        City, State: EAST HARTFORD, CT 06108
        Phone: 860/289-2643
        800 Phone: 866/636-4723
        Fax Phone: 800/556-5284
        Email: northeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000001skLkAAI&URLSource=cjhunter

        Industrial Engineer

        Description:
        General Summary:
        The Industrial Engineer position provides technical support for the Production Engineering Group working in areas such as manufacturing, design, development, and testing.

        Duties and Responsibilities:
        • Provides time studies, capacity analysis (manpower, tooling, capital, and facilities), line balancing, and crew loading, work sampling, and PC computer data analysis.
        • Establishes manpower requirements, line and sub-assembly balancing data, and expectancy time performances, headcount planning, and budgeting concepts.
        • Recommends improvements to manufacturing methods and processes including utilization of personnel, material, and utilities.
        • Collects and analyzes data and metrics and presents the information to large audiences.
        • Provides productivity planning with accompanying future strategies for improvement.
        • Develops and maintains engineered time standards.
        • Applies statistical methods and performs mathematical calculations to determine manufacturing assembly processes, labor requirements, and production standards.
        • Develops and maintains plant standards.
        • Creates and maintains valve stream maps.
        • Plans, schedules, and prioritizes work to meet established deadlines.
        • Drafts and designs layout of equipment, materials, and work centers to optimize material flow, labor efficiency, safety, quality, productivity, and ergonomics.
        • Determines and improves processes to meet production levels.
        • Schedules and sequences job plans (with ME approval) to support effective work flow.
        • Supports work specific to detail parts manufacturing and assembly operations of composite and metallic aerospace hardware within a manufacturing environment.
        • Develops documentation and procedures to ensure compliance specific to customer and regulatory production requirements and specifications.

        Education, Work Experience, Certification and/or Licensure:
        Bachelor’s Degree (Manufacturing, Manufacturing Engineering, Industrial Engineering, Aerospace Engineering, Industrial Technology, or equivalent technical major) required.
        Experience in aerospace industry in aerospace manufacturing a plus.

        Knowledge, Skills and Abilities:
        • Strong analytical and innovative skills.
        • Strong work ethic.
        • Ability to multitask.
        • Ability to work under minimal supervision.
        • Detail oriented.
        • Excellent problem solving skills.
        • Ability to read and interpret engineering drawing and/or specification requirements.
        • Excellent communication skills, both verbal and written.
        • Excellent presentation skills.


        Physical Requirements:

        • Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
        • Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
        • Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
        • Read, hear, speak, and see with no restrictions, as required by job duties.
        • Comprehend and adhere to management directions and/or safety instructions with no restrictions.
        • Effectively communicate in Business English language.
        • Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
        • Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.   

         
        Job Number: 1710071796
        Job Location: Greensboro, NC
        Duration: 12 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Lucinda Contreras
        Address: 11828 W CENTRAL STE 100
        City, State: WICHITA, KS 67212-5129
        Phone: 316/729-1800
        800 Phone: 800/333-8644
        Fax Phone: 316/729-1857
        Email: cecjwichita@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002390MAAQ&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Industrial Engineer III (LA)

        Description:
        SEVERAL OPENINGS

        The ideal candidate will have experience:
        - Performing and/or developing Process Management, Process Measurement, Performance Metrics, Root Cause Analysis,
        Project Management, Lean Manufacturing, Manufacturing Operations (Support), Business Case Analysis, Forecasting,
        Resource Scheduling and Constraint Based Scheduling, Operating Plans, Supply Chain and Manufacturing
        - Proficiency and experience using Microsoft Office suite including MS Project.
        Candidate must be able to:
        - Support a rotating shift (Rotating shifts first and/or second) are required to support production as needed.
        - Interact with employees to gather data for process development and improvements. This may include observing and
        documenting processes, and collecting data in manufacturing areas or in assemblies during various production phases.
        - This position requires the ability to walk, stand, and enter into work areas via steps or ladders as needed. Candidate may
        be in proximity to chemicals when observing/gathering data in an area in the factory where chemicals are in use.

        The position required the use of advanced Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Independently develops models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies advanced industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Researches, designs, develops, improves, and implements processes to enhance schedule performance, lower cost, and improve quality, through the application of advanced Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Independently manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget. Utilizes advanced engineering methods to develop optimal process designs and efficient utilization of resources in the creation and validation of products. Analyzes and designs value stream, including capability, capacity, throughput, work flow and logistics.

        Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification.
         
        Job Number: IEIIILA
        Job Location: New Orleans, LA
        Rate: OPEN
        Per Diem: YES
        Overtime: Possible
        Duration: 12+ Months
        Start Date: ASAP
        Input Date: 12/01/2017
        Firm Name: AMERICAN CYBERSYSTEMS
        Attention: Andrew Walbert
        Address: 1750 112TH AVE NE STE C228
        City, State: BELLEVUE, WA 98004
        Phone: 425/605-2321
        Fax Phone: 425/558-0688
        Website: www.acsicorp.com

        Instrumentation Engineers

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        Instrumentation Technicians

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        MP&P Engineers

        Description:
        Looking for 4 MP&P Engineers
        *Degree
        *Composites
        *Structures Background
        *Aerospace/Aircraft Background

        Email resumes to: mmccarthy@pdstech.com
         
        Job Number: MP&P-AL
        Job Location: Tallassee, AL
        Rate: $55.00-$60.00
        Per Diem: Possible
        Overtime: Possible
        Duration: 6-12 Months+
        Start Date: ASAP
        Input Date: 08/07/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Mary Ann McCarthy
        Address: 1215 FERN RIDGE PKWY STE 231
        City, State: ST LOUIS, MO 63141
        Phone: 314/628-9143
        800 Phone: 800/472-3737
        Fax Phone: 314/628-9485
        Website: www.pdstech.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Maintainability Engineer III

        Description:
        1) Maintainability Predictions in accordance with MIL-HDBK-472, and 2) Maintainability Analysis Reports to include conducting maintenance studies using MIL-HDBK-470A criteria to assess impact to Accessibility, Human Factors, Preventive Maintenance as a result of aircraft modifications. Catia skills highly desirable.

        Principal Duties and Responsibilities
        1. Coordinate and conduct maintenance program development activities in support of the scheduled maintenance program for existing or future aircraft programs maintenance tasks, maintenance skills, manning and documentation procedures, including off-sight presentations/meetings.
        2. Evaluate fleet data to determine the feasibility of incorporating mechanical, materials, and/or procedural advancements that improve aircraft availability or the technicians ability to perform scheduled or corrective maintenance.
        3. Evaluate methods that lead to the reduction of expended task man-hours and needed support equipment to affect maximum aircraft availability with minimum maintenance resources.
        4. Utilize departmental, company, and industry resources to the maximum in developing maintenance practices for aircraft.
        5. Coordinate the evaluation of current maintenance practices or suggestions to determine their feasibility/practicality for application to the fleet. Present Maintenance Program changes to the Customer based boards for review, acceptance and application to fleet inspection schedules.
        6. Maintain liaison with maintainability/logistics groups, within the aircraft and aerospace industry, to stay abreast of new developments, component designs, and processes that may be applicable to maintainability functions and directly benefit scheduled maintenance programs.
        7. Must independently exercise self-policing practices to ensure timely, effective follow-through and close-out of assigned tasks. Inform cognizant individuals of obstacles that hinder a successful conclusion.
        8. Coordinate and lead major project activities. Review work of team members for technical and grammatical accuracy.
        9. Perform dispatch reliability and aircraft availability information review and calculations.
        10. Represent Maintainability Engineering in dealing with Regulatory bodies and officials.

        Other Requirements:
        1. Knowledge of aircraft inspection programs, Federal Aviation Regulations, aircraft systems and technical manuals including maintenance record systems required.
        2. Proficient knowledge of MSG-3 Maintenance Program Development process.

        Experience/Education Required
        Bachelors degree in aviation maintenance, engineering technology, or a related curriculum; or an equivalent combination of education and experience. A&P license preferred.

        Seven years of related aircraft maintenance and operational experience required or equivalent aircraft experience.
         
        Job Number: 24-186
        Job Location: Savannah, GA
        Rate: $62 to $67/hr
        Per Diem: YES
        Overtime: YES
        Duration: 1 YR+
        Start Date: ASAP
        Input Date: 11/07/2017
        Firm Name: PRECISION PERSONNEL INC
        Attention: Matt
        Address: 600 CLEVELAND ST STE 700
        City, State: CLEARWATER, FL 33755
        Phone: 727/449-0600
        800 Phone: 877/600-2333
        Fax Phone: 727/449-0627
        Website: www.precisionpersonnel.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Manufacturing Engineer

        Description:
        The Manufacturing Engineer provides a range of expertise in supporting and improving the manufacturing capabilities. This individual will be unrelenting in their pursuit of operations excellence and continuous improvement to sustain a wide range of low volume and high mix product line(s). He/she will provide solutions to that directly impact the sustaining and growth efforts of operations through the improved use of tooling/fixturing, manufacturing processes and labor standards.

        Job Core Responsibilities

        Expertise in developing a range of engineering solutions to improve the manufacture of new and existing Meggitt products
        Experience troubleshooting and resolving productivity, quality, capacity, tooling, equipment or manufacturing issues.
        Improves current production processes to manufacture products and reduces overall business cost basis.
        Develops, maintains and optimizes Bill Of Materials (BOM) build plans, manufacturing process knowledge, routers, labor standards, tooling or equipment
        Works with Engineering to achieve Value Add Value Engineering, design for manufacturing and design to cost objectives for existing programs and provides process/production input to win new business.
        Excellent ability to apply a systematic and analytical approach to problem solving
        Proactive behavior, a problem solver rather than a problem reporter.
        Effective interpersonal, verbal and written communication skills to drive tasks to completion
        Desired Skills:

        Advanced knowledge of Lean Manufacturing, Six Sigma or other continuous improvement
        3 + years of experience working in aerospace, medical or other highly regulated industry strongly preferred
        Technical expertise in materials, machining and welding.
        Experience in understanding and authoring blueprints, engineering specifications, Computer Aided Design modeling, equipment automation protocols and implementation.


        Education Required:

        Bachelor’s Degree in Engineering or related field.
        Masters Degree Preferred

        Required Experience :

        3-5 years of relevant experience
         
        Job Number: KD372591
        Job Location: Simi Valley, CA
        Per Diem: $35.00 per hour
        Duration: 5 months
        Start Date: ASAP
        Input Date: 08/14/2017
        Firm Name: CDI CORPORATION
        Attention: Kris Douglas
        Address: 17177 PRESTON RD STE 300
        City, State: DALLAS, TX 75248
        Website: www.cdicorp.com

        Manufacturing Engineer - Level 1

        Description:
        Location: Lexington, KY
        Rate: $20.00 - $35.00/HR
        Duration: 1 year contract

        **MUST be a U.S. Citizen**
        **MUST have an Active Secret Clearance or to have had one with the last two (2) years**

        Job Description:
        - Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
        - Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
        - Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
        - Adapts machine or equipment design to factory and production conditions.
        - May incorporate inspection and test requirements into the production plan.
        - Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
        - Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
        - Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
        - Ensures processes and procedures are in compliance with regulations.

        Skill/Experience/Education
        Mandatory:
        - Mechanical, Electrical, Aerospace Engineering Degree.
        - 1st, 2nd or 3rd shift schedules may be required.
        - On-aircraft and off operations.
        - In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
        - The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
        - This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
        - The employee will work with manufacturing on issues and process improvements.
        - Active Secret Security Clearance within the last 2 years.

        Desired:
        - Job scope experience
        - Team Center Engineering experience
        - Production Engineering experience
        - Production Operations experience
        - Mechanical Experience
        - Electrical Experience
        - Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
        - Ability to read and interpret engineering drawings
        - Excellent verbal and written communications skills
         
        Job Number: 7709
        Job Location: Lexington, KY
        Rate: $20.00 - $35.00/HR
        Per Diem: Split Possible
        Overtime: Possible
        Duration: 1 yr
        Input Date: 01/17/2018
        Firm Name: INCONEN CORPORATION
        Attention: Patrick O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Email: patrick@inconen.com
        Website: www.inconen.com

        Manufacturing Engineer - Level 1 - Interim Secret

        Description:
        PDS Tech, Inc is seeking a Manufacturing Engineer - Level 2  for an open position in Lexington, KY (
        Job Description: 


        • Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
        • Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
        • Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
        • Adapts machine or equipment design to factory and production conditions.
        • May incorporate inspection and test requirements into the production plan.
        • Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
        • Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
        • Ensures processes and procedures are in compliance with regulations.

        Mandatory Skills:
        • Mechanical, Electrical, Aerospace Engineering Degree.
        • 1st, 2nd or 3rd shift schedules may be required.
        • On-aircraft and off operations.
        • In this role, The employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
        • The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
        • This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
        • The employee will work with manufacturing on issues and process improvements.
        • Must have Interim Secret Clearance.



        Desired Skills:

        • Jobscope experience TeamCenter Engineering experience Production Engineering experience Production Operations experience Mechanical Experience Electrical Experience with Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
        • Active Secret Security Clearance within the last 2 years.
        • Ability to read and interpret engineering drawings
        • Excellent verbal and written communications skills


         
         
        Job Number: 1710071539
        Job Location: Lexington, KY
        Duration: 3 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Earl Sawyer
        Address: 2154 N CENTER ST STE 405D
        City, State: NORTH CHARLESTON, SC 29406
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238JfAAI&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Manufacturing Engineer with active secret CA

        Description:
        Requirement# AERO-REQ-0604
        Title: Manufacturing Engineer
        Work location: Palmdale, CA
        Work Week: 9/80-A
        Priority: High
        Needed Date: 07/14/2017
        End Date: 08/10/2018
        Number of Resources: 1
        Security Clearance: Secret with investigation within the past 5 years



        Description
        Candidate will work in a manufacturing environment and work cross-functionally with operations team to support Manufacturing Execution System (MES) ERP4C.
        Candidate will work with core support team to troubleshoot, design and develop requirements for the MES system.
        Candidate will work trouble tickets, participate in design reviews and work with core IT/One Aero team on the development of new capabilities for MES system.
        Will be responsible for identifying system issues and making recommendations for corrections.
        Must have a thorough understanding of manufacturing process and procedures including fabrication, assembly and coatings in several disciplines including composites, metallics, machining, bonded assemblies, and installations.
        Must have previous experience in a manufacturing environment working cross functionally with other disciplines including industrial engineering, planning, scheduling and production planning.
        A thorough understanding of engineering blueprints, process specifications and facility lay-outs is required. Previous experience with lean manufacturing and process improvements is required.

        Skill/Experience/Education

        Mandatory:

        Active Secret Clearance with investigations within the past 5 years.
        SAP Superuser; Subject Matter Expert in SAP Bill of Materials & Production System Development. Enterprise Resource Planning(ERP) and Material Requirements Planning (MRP), System Deployment.
        Ability to work extended work hours to meet project schedule requirements.

        Desired:

        Masters degree from an accredited college in a related discipline.
        Understanding of LM Palmdale company policies, procedures and systems including SAP, One-Aero, ERP4C.
        Airframe and Systems Integration experience Working knowledge of aerospace organizations including: Planning, Quality, Prod Control, ERP, IT. Quality, etc. Certified Manufacturing Engineer, Greenbelt, Blackbelt or Lean Certification Independent creative thinking and problem solving

        Skill Matrix
        Skill Name Description Level (1-5, 5 being the highest)
        1 2 3 4 5 Years Mandatory(Yes/No)
        Manufacturing Engineering Mfg. Eng. level 2 or 3 6-8 Years Yes


        Interview Required Yes
        OT Allowed Yes (#hours allowed: 15, Pre-Approval Reqd.:No)
        Travel No
        Non-Exempt

        Rates
        0-4 Yrs Pay Rate: 45.00 USD
        5-8 Yrs Pay Rate: 55.00 USD
        9+ Yrs Pay Rate: 65.00 USD
         
        Job Number: JE-0604
        Job Location: Palmdale, CA
        Rate: 45-65/hr DOE
        Duration: 12 month contract
        Input Date: 08/31/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mecanical Product Engineer

        Description:
        This position is located in …
        The Product Engineer will report to the Product Engineering Manager responsible for the design and development of components and sub-systems for CPS products. Job duties include designing and developing components and sub-systems for diesel engines, transmissions, and other mechanical systems for military ground vehicles. The Product Engineer will need to translate customer requirements into a product engineering specification and then do the engineering design calculations and design review activities to complete the product design. Also, coordination of drawing creation, hardware procurement, test plan creation, product testing, and failure analysis will be done. Support will be needed to resolve customer, supplier, and operations issues and to write Engineering Change Requests (ECR’s) as needed.
        Major functions:
        Required Skills:
        Bachelor of Science (BS) in Mechanical, Aerospace, or Aeronautical Engineering from an accredited university required.
        Ability to perform mechanical stress or structural engineering calculations.
        Ability to perform thermal fluids calculations.
        Demonstrated ability designing and developing mechanical devices.
        Ability to manage and organize multiple project tasks to meet established deadlines.
        Good written and verbal communications.
        Must be willing to travel (domestic and foreign) up to 10%.
        Must be able to move freely within the manufacturing and lab environment with reasonable accommodation.
        Previously held security clearance preferred. Ability to get a security clearance required

        Preferred Skills or Experience:
        MS degree in Mechanical, Aerospace, or Aeronautical Engineering (preferred).
        Pro-E experience (preferred).
        Engine and engine sub-system design and development experience (preferred).
        Transmission and transmission sub-system design and development experience (preferred).
        Gear design experience (preferred).
        Experience designing and developing components for a military or aerospace contractor (preferred).
        Scope information:
         
        Job Number: 10014
        Job Location: Muskegon, MI
        Rate: OPEN
        Per Diem: YES
        Overtime: Possible
        Duration: 6Mon+
        Start Date: ASAP
        Input Date: 07/31/2017
        Firm Name: ADVANCED TECHNOLOGY
        Attention: Chris Lombardi
        Address: 15 KENNETH MINER DR
        City, State: WRENTHAM, MA 02093
        800 Phone: 877/334-7700
        Fax Phone: 877/335-7700
        Website: www.advancedtechno.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mechanical Design Engineer

        Description:
        Bachelor of Science degree required
        As a Senior Mechanical Engineer, the qualified candidate will be a motivated self-starter who can work with other engineers to resolve technical problems, establish approaches for solutions, and complete mechanical scope of work. In this position, the candidate will be responsible for developing technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of various types of infrared focal plane assemblies with considerations in thermal and structural performance in vacuum and cryogenic environments. Familiarity with CREO/Pro Engineer or a similar CAD tool and a good grasp of drawing standards is strongly recommended. The candidate will also be responsible for meeting cost, schedule, quality, and performance requirements for the finished product. The candidate will work with minimal direction or supervision while exercising considerable latitude in determining the technical objectives of the assignment. The position will require frequent interaction with senior external personnel on significant technical matters often requiring coordination between organizations.

        Basic Qualifications:
        A minimum of 5 years of experience in mechanical design and/or production engineering support for military and aerospace applications.
        Understanding of manufacturing methods and processes such as assembly standards, fabrication processes, assembly documentation, and mechanical fasteners.
        Minimum of 5 years of literacy and experience with Pro Engineer or similar CAD tool
        Must have a working knowledge of Microsoft Office products (Word, Excel, Powerpoint)
        Ability to read detailed engineering drawings, specifications and an understanding of Geometric, Dimensional & Tolerance

        Required Experience, Knowledge, Skills and Abilities:
        Bachelor's Degree in Engineering, Mechanical preferred.
        Possess strong written and oral communication skills
        Experience with support roles with design and mechanical applications in Integrated Product Teams that include other engineering disciplines such as Electrical, Systems, and Manufacturing Engineering
        Experience in mechanical sub-systems packaging, materials, thermal and structural analysis
        Specific experience in space flight hardware and/or military product applications and environments

        Desired Qualifications:
        Knowledge in the design of products and tooling used in applications requiring high reliability and extended life
        Direct experience in developing detailed mechanical designs and documentation packages for optical, electrical and/or mechanical systems.
        Knowledge in the design of infrared products
        Experienced in design of products for cryogenic environments.
        Experience with a gate release process for product development.
         
        Job Number: 39075
        Job Location: Goleta, CA
        Duration: 6 months
        Start Date: ASAP
        Input Date: 08/03/2017
        Firm Name: APOLLO PROFESSIONAL SOLUTIONS
        Attention: Rick Nussbaum
        Address: 1700 WELLS RD STE 1
        City, State: ORANGE PARK, FL 32073-2373
        Phone: 904/562-3215
        800 Phone: 866/277-3343
        Fax Phone: 904/713-2000
        Website: www.apollopros.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mechanical Engineer - Space Hardware/ Infrared

        Description:
        Title: Sr Mechanical Engineer
        Location: Goleta, CA
        Duration: 6+ months contract

        Job Description:
        Senior Mechanical Engineer, the qualified candidate will be a motivated self-starter who can work with other engineers to resolve technical problems, establish approaches for solutions, and complete mechanical scope of work.
        In this position, the candidate will be responsible for developing technical solutions to a wide range of complex problems related to the entire product life cycle including proposal, design, manufacture, integration and test of various types of infrared focal plane assemblies with considerations in thermal and structural performance in vacuum and cryogenic environments.
        Familiarity with CREO/Pro Engineer or a similar CAD tool and a good grasp of drawing standards is strongly recommended.
        The candidate will also be responsible for meeting cost, schedule, quality, and performance requirements for the finished product.
        The candidate will work with minimal direction or supervision while exercising considerable latitude in determining the technical objectives of the assignment.
        The position will require frequent interaction with senior external personnel on significant technical matters often requiring coordination between organizations.

        Basic Qualifications:
        A minimum of 5 years of experience in mechanical design and/or production engineering support for military and aerospace applications.
        Understanding of manufacturing methods and processes such as assembly standards, fabrication processes, assembly documentation, and mechanical fasteners.
        Minimum of 5 years of literacy and experience with Pro Engineer or similar CAD tool Must have a working knowledge of Microsoft Office products (Word, Excel, Powerpoint)
        Ability to read detailed engineering drawings, specifications and an understanding of Geometric, Dimensional & Tolerance

        Required Experience, Knowledge, Skills and Abilities:
        Bachelor's Degree in Engineering, Mechanical preferred.
        Possess strong written and oral communication skills
        Experience with support roles with design and mechanical applications in Integrated Product Teams that include other engineering disciplines such as Electrical, Systems, and Manufacturing Engineering Experience in mechanical sub-systems packaging, materials, thermal and structural analysis
        Specific experience in space flight hardware and/or military product applications and environments

        Desired Qualifications:
        Knowledge in the design of products and tooling used in applications requiring high reliability and extended life
        Direct experience in developing detailed mechanical designs and documentation packages for optical, electrical and/or mechanical systems.
        Knowledge in the design of infrared products
        Experienced in design of products for cryogenic environments.
        Experience with a gate release process for product development.
        Advanced degree in Engineering, Mathematics, Science or related professional experience

        Security Clearance: Ability to obtain a security clearance preferred
        Contractor Work Week 5/40
        Degree Required? Yes
         
        Job Number: WT373907
        Job Location: Goleta, CA
        Rate: $65.00
        Duration: 6+ months
        Start Date: ASAP
        Input Date: 08/04/2017
        Firm Name: CDI CORPORATION
        Attention: Wendy Toll
        Address: 17177 PRESTON RD STE 300
        City, State: DALLAS, TX 75248
        Website: www.cdicorp.com

        Mechanical Engineer 4- Secret

        Description:
        PDS Tech, Inc. is seeking a Mechanical Engineer 4 in Melbourne, FL with an active DOD secret clearance. 

        Position Summary / Responsibilities

        Candidate will be responsible for structural design and leading a team of Electrical/Mechanical Lab Design engineers and structural designers in the development of primary and secondary metal and composite structure parts and assemblies for both new and existing Laboratories.  Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines. 



         


         

        Mechanical Lab Design Engineer



        • Proficiency with the NX-Teamcenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential
        • Active in scope Secret Clearance required. 
        • Strong MS Office skills, Nx/CATIA Teamcenter and proficient in MS Office Skills, strong technical writing abilities.
        • Bachelors Degree in Mechanical Engineering, STEM Degree or equivalent years of experience in support of aerospace mechanical system and  subsystem design and test operations. 
        • Level 4 (3 Positions) : 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


         


        Preferred Qualifications:
        Current DoD Secret Clearance Required.

        Active DoD Secret Security Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Contingent upon the ability to obtain access to Special Programs is required.


         
        Job Number: 1710067308
        Job Location: Melbourne, FL
        Duration: 9 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Rebecca Burrows
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        Phone: 214/647-9600
        800 Phone: 800/270-4737
        Fax Phone: 214/647-9630
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000021nw2AAA&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Mechanical Engineer II with Ability to obtain security clearance / CREO / Electro-optical sensors CA

        Description:
        7047859
        Mechanical Engineer II
        El Segundo, CA
        50-60/hr
        6 months

        The Sr Mechanical Engineer I is responsible for the conceptual and detailed mechanical design of EO Sensors and Laser products for application in ground, airborne and space-based defense. Responsibilities include the design of structures, mechanisms, thermal systems and electronic enclosures. Candidate will be expected to follow established procedures and instructions while working closely with program / functional supervision to ensure the overall design objectives are met. Contacts are primarily with the immediate section manager, team lead, project leaders and other personnel (peers) within the applicable program.

        Applies extensive technical expertise in Mechanical Engineering, and has full knowledge of other related disciplines (Thermal, Structural, Electrical, and Optical). Develops technical solutions to complex problems that require the regular use of ingenuity and creativity using CAD software like CREO and performs preliminary mechanical analyses.

        Guides the successful completion of major programs and may function in a project leadership role. Erroneous decisions or recommendations would typically result in failure to achieve major organizational objectives.

        Will assist in understanding the design requirements, coordinating mechanical design, preparation of design reviews, presentation of the engineering to Raytheon management as well as customers. The position requires the mechanical designer to understand tasks involving pre-proposal, conceptual, preliminary, and critical design build, test, and delivery of complex Electro-Optical Sensors. The engineer in this position must lead the team from a deep, wide breadth and strong technical background involving material selection, optical layout, thermal management, precision mechanical mounting and motion, and structural optimization. This position also requires an engineer familiar with design for manufacturing and producibility.

        Required Skills: • CAD software, especially Creo. • Geometric Tolerancing (GD&T) • Able to present to customer • Maintain positive customer and supplier relationships • Ability to obtain security clearance • At least 6 years of professional experience Desired Skills: • CAD software, especially Creo and Windchill • Hands on experience in Electro-optical sensors • Microsoft Project • Prior experience in DoD or Aerospace • Already possess a security clearance Required Education: • A Bachelor's degree in Mechanical Engineering or related Engineering field • Prefer to also have a Master's Degree • Minimum 6 years related experience
         
        Job Number: MB-7047859
        Job Location: El Segundo, CA
        Rate: 60/hr max
        Duration: 6 month contract
        Input Date: 08/21/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        Mechanical Systems -- Braking, Gearing, Pneumatics

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Model Based Systems Engineer

        Description:
        Duties:
        The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
        Knowledge of Jazz Team Server (JTS) enterprise management is useful.
        An intermediate level of practice as a SysML Model User and Builder is desired.
        Understanding of how these applications are deployed and used in the aerospace industry is preferred.
        Rocket engine or propulsion system domain knowledge is desirable.
        The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

        Skills:
        Required:
        Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
        An intermediate level of practice as a SysML Model User and Builder is desired.
        The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

        Desired:
        Knowledge of Jazz Team Server (JTS) enterprise management is useful.
        Understanding of how these applications are deployed and used in the aerospace industry is preferred.
        Rocket engine or propulsion system domain knowledge is desirable.

        Education:
        BS or MS in Engineering, Computer Science or related field is required.
        MS in Systems Engineering is desirable.
         
        Job Number: JG7326500
        Job Location: Canoga Park, CA
        Rate: $70.00 per hour
        Duration: 6+ months
        Start Date: ASAP
        Input Date: 08/11/2017
        Firm Name: CDI CORPORATION
        Attention: Jason Greer
        Address: 17177 PRESTON RD STE 300
        City, State: DALLAS, TX 75248
        Website: www.cdicorp.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Model Based Systems Engineering (MBSE) Technical Specialist

        Description:
        Location: Canoga Park, CA
        Rate: DOE
        Duration: 6 month contract


        ** Candidates must be U.S. Citizens **
        ** Permanent residents are NOT eligible for this role **
        ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


        Duties:
        -The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
        -Knowledge of Jazz Team Server (JTS) enterprise management is useful.
        -An intermediate level of practice as a SysML Model User and Builder is desired.
        -Understanding of how these applications are deployed and used in the aerospace industry is preferred.
        -Rocket engine or propulsion system domain knowledge is desirable.
        -The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

        Skills:
        Required:
        -Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
        -An intermediate level of practice as a SysML Model User and Builder is desired.
        -The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

        Desired:
        -Knowledge of Jazz Team Server (JTS) enterprise management is useful.
        -Understanding of how these applications are deployed and used in the aerospace industry is preferred.
        -Rocket engine or propulsion system domain knowledge is desirable.

        Education:
        -BS or MS in Engineering, Computer Science or related field is required.
        -MS in Systems Engineering is desirable.
         
        Job Number: 7755
        Job Location: Canoga Park, CA
        Rate: DOE
        Per Diem: Split Possible
        Overtime: Possible
        Duration: 6 mos
        Input Date: 11/14/2017
        Firm Name: INCONEN CORPORATION
        Attention: Rex Calkins
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        NC Programmers - Composites or Metallics **HOT**

        Description:
        UGNX or Catia V5
        *Composites or Metallics
        Two (2) to four (4) years of N/C Programming experience, using CAD/CAM systems to analyze and modify part models and produce programs required.
        Aerospace manufacturing experience preferred.
        Unigraphics and/or CATIA are the preferred systems.
        3, 4, and 5 axis experience
        Familiarity with Windows environments and office tools.
        Machinist experience preferred.
        Familiarity with Vericut preferred
        Email resume to: mmccarthy@pdstech.com
         
        Job Number: GKN-MO
        Job Location: St. Louis, MO
        Rate: $60.00
        Per Diem: Possible
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 08/07/2017
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Mary Ann McCarthy
        Address: 1215 FERN RIDGE PKWY STE 231
        City, State: ST LOUIS, MO 63141
        Phone: 314/628-9143
        800 Phone: 800/472-3737
        Fax Phone: 314/628-9485
        Website: www.pdstech.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Oxygen Systems Engineer

        Description:
        Oxygen Systems Engineer
        Full Time position
        Greensboro, NC

        US Citizen, Or Greencard holder.
        Medical and dental
        401k with match
        15 holidays
        Time off during week of Christmas
        Bonus potential

         
         
        General Summary: 
         
        The Oxygen System Cognizant Engineer is responsible for providing technical expertise in support of the Oxygen System through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
         
        Duties and Responsibilities:
        Oversee and coordinate Oxygen System project activities through all phases of the project including preliminary design, detailed design, development, certification, production and in-service product support
        Interface with other company departments, FAA and suppliers to ensure project schedule milestones are met 
        Actively support the development of company infrastructure
        Maintain consolidated Engineering Parts List (EPL), weight status and cost status for the Oxygen System
        Support design, manufacturing (production), in-service and flight test activities
        Maintain and present to management integrated project schedule and status for layouts, ICD’s, drawings, development tests, certification tests, flight test plans, ITF tests related to the Oxygen System and plans/status to resolve flight test, manufacturing and in-service issues
        Track and report status of action items related to design, development, certification, sustaining, in-service and flight test related to the Oxygen System
        Provide support as required in other areas of the Mechanical Systems 2 team that includes bleed air systems, air conditioning, waste system, and ice and rain protection systems
         
        Qualifications
         
        Education, Work Experience, Certification and/or Licensure:
        Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
        5+ years of directly related technical experience in the development and certification of aircraft Oxygen Systems required
         
        Knowledge, Skills and Abilities:
        Knowledge of aircraft communication buses such as ARINC 429 strongly preferred
        Knowledge of FAA processes and procedures related to qualification testing required.
        Knowledge of DO-160, DO-178B and DO-254 processes are required
        Knowledge of 14CFR23 or 25 regulations and advisory circulars related to Oxygen and ECS regulations required
        Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata is preferred
        Familiarity with ERP Systems such as SAP
        Proficiency in Microsoft Office Suites (Word, Excel, Project, Lotus Notes, PowerPoint) is required
        Ability to understand, prepare and review FAA certification plans
        Ability to prepare detailed functional test procedures
        Ability to manage projects end to end including defining project goals, creating project plans, tracking performance, analyzing project schedules, and presenting information to senior management.
        Ability to establish and manage project budgets
         
         
        Job Details
        City
        Greensboro
        State
        North Carolina
        The Structures Company LLC is an AA/EOE.
         
        Job Location: Greensboro, NC
        Rate: "open"
        Duration: FullTime
        Start Date: asap
        Input Date: 08/18/2017
        Firm Name: STRUCTURES COMPANY LLC
        Attention: Mark Sharp
        Address: P O BOX 2278
        City, State: SEAL BEACH, CA 90740
        Phone: 714/823-3000
        Website: www.thestructurescompany.com

        Powerplant Specialists

        Description:
        Aerospace flight and test/certification engineering specialists

        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Washington
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Erika
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x106
        Email: erika.legrand@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Process Engineer - Spin Forming (SC)

        Description:
        Leading global aerospace company are seeking a number of experienced PROCESS ENGINEER - SPIN FORMING for the introduction of new products into manufacture within one of their new production facilities in South Carolina.

        They are looking for experienced Engineers who have worked in the aircraft/aerospace industry, specifically in relation to spin forming of thin metallic structures. This process work specifically relates to the introduction of new products, such as lip skins for nacelles.

        Initial contracts will up to 9 months, with a strong likelihood of further work and the opportunity of a staff position.
         
        Job Number: JO0000000022
        Job Location: SC
        Per Diem: Possible
        Duration: 9 months
        Start Date: September 17
        Input Date: 09/14/2017
        Firm Name: STRONGFIELD TECHNOLOGIES USA INC
        Attention: Adrian Medhurst
        Address: 5000 BIRCH ST STE 3000
        City, State: NEWPORT BEACH, CA 92660
        Website: www.strongfield.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Procurement Engineer - Level 3

        Description:
        Procurement Engineer - Level 3

        Location: Tampa, FL
        Pay Rate: DOE ($25/hr - $45/hr)
        Duration: 6 month contract
        Shift: First, 5/40
        Travel: Yes; Lackland AFB San Antonio, TX
        ***MUST have an ACTIVE SECRET CLEARANCE***

        Description
        -Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
        -Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
        -Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
        -Facilitate technical trade-offs and standardization that may lead to more economical procurement.
        -Recommends design changes or process improvement to mitigate production issues.
        -Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
        -Provides technical solutions to a wide range of difficult problems.
        -Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
        -Works under general direction only and independently determines and develops approach to solutions.
        -Work is reviewed upon completion for adequacy in meeting objectives.
        -Reports directly to the Lead Procurement Engineer on the C-5 program.
        -Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
        -Experience with requirements management and flowdown to supplier.
        -Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
        -Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

        Skill/Experience/Education (MANDATORY):

        -Quality Assurance (4-5+ years experience)
        -Supplier Quality Assurance (4-5+ years experience)
        -Hardware Engineering (4-5+ years experience)
        -Test Verification/Validation (4-5+ years experience)
        -Configuration Management (4-5+ years experience)
        -ISO 9001: 2008 training (required)
        -AS9100C training (required)
        -Lockheed Martin Procure 2 Pay (P2P) training (required)
        -Auditor training (required)
        -Engineering or Technical 4-year Degree
        -Process Improvement
        -Purchase Orders
        -Physical and Software Configuration Audits
        -Source Inspections
        -QMS
        -Risk Assessment
        -ASQ
        -Corrective Action and Prevention
        -Reliability
        -Logistics
        -Excel


        Desired:
        -Subcontracts Management (0-3+ years experience)
        -Systems Engineering [aircraft avionics systems] (0-3+ years experience)
        -Green Belt/Black Belt Certification
         
        Job Number: 7345
        Job Location: Tampa, FL
        Rate: 25-45
        Per Diem: Split Possible
        Overtime: Yes
        Duration: 6 mos
        Start Date: ASAP
        Input Date: 11/14/2017
        Firm Name: INCONEN CORPORATION
        Attention: Rex Calkins
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Product Engineers - East Aurora, NY

        Description:
        STS AeroStaff Services is hiring Product Engineers for open positions in East Aurora, New York.

        Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

        Job Duties:

        • Lead the efforts associated with the creation, release and maintenance of the Material and Process Reports and Material Usage Agreements across more than 5 products
        • Coordinate directly with customers on the materials selected and any special requirements associated with the materials
        • Lead the Material Process discussions at technical interchange meetings and design reviews
        • Coordinate with design engineers in the selection of materials that are appropriate for use in the application and to the greatest extend possible have heritage on other man rated programs

        Qualifications:

        • BS with 2 years’ related experience or MS with 1 year related experience in one of the following fields: Materials/Metallurgy, Chemical/Chemistry/Electro-Chemical, Welding, Industrial, or Mechanical
        • Experience with complex mechanical hardware in an aerospace environment is recommended
        • Experience in creating detailed reports and design documentation and presenting these reports to customers

        Benefits:

        STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

        We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

        Thanks for taking the time, and we look forward to hearing from you soon.
         
        Job Number: 39642
        Job Location: East Aurora, NY
        Rate: DOE
        Per Diem: No
        Overtime: Possible
        Duration: Temp
        Start Date: ASAP
        Input Date: 08/09/2017
        Firm Name: STS AEROSTAFF SERVICES
        Attention: STS AeroStaff Services
        Address: 2000 NE JENSEN BEACH BLVD
        City, State: JENSEN BEACH, FL 34957
        800 Phone: 877/707-5767
        Fax Phone: 877/707-5767
        Website: www.stsaviationgroup.com

        Production Planner

        Description:
        PDS Tech, Inc. is seeking Production Planner in Kilgore, TX. 

         Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling, by performing the following duties:
         
        This job family has 5 qualification levels:
        Engineer-Manufacturing 1
        Engineer-Manufacturing 2
        Engineer-Manufacturing 3
        Engineer-Manufacturing 4
        Engineer-Manufacturing 5

        Essential Duties and Responsibilities include the following. Other duties may be assigned.
        1. Know and follow general company and corporate policies and procedures.
        2. Know, understand, and follow department policies and procedures.
        3. Confers with management, engineering and other staff regarding manufacturing capabilities, production schedules and other considerations to facilitate production processes
        4. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
        5. Estimates production times, staffing requirements, and related costs to provide information for management decisions.
        6. Analyzes and plans work force utilization, space requirements, and workflow, and designs layout of equipment and workspace for maximum efficiency.
        7. Confers with planning staff concerning product tooling to ensure efficient production methods
        8. Confers with vendors to determine product specifications and arrange for purchase of equipment, materials or parts and evaluates products according to specifications and quality standards
        9. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
        10. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
        11. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
        12. Consults customer specification documents to develop operations routing for all manufactured products.
        13. Other various duties as needed or as assigned.

        Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
         
        Education and/or Experience
        -High school diploma or general education degree (GED);
        -Six months to one year related experience and/or training; or equivalent combination of education and experience.
         
         
        Computer Skills
        To perform this job successfully, an individual should possess basic computer proficiency and functional knowledge with applications and activities including (but not limited to):
        -MasterCAM
        -Syteline Manufacturing software
        -Microsoft Project Management software
        -Microsoft Excel Spreadsheet software
        -Microsoft Word Processing software
         
        Language Skills
        -Ability to read and write the English language.
        - Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. 
        -Ability to write reports, business correspondence, and procedure manuals. 
        -Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.
         
         
        Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

        While performing the duties of this Job, the employee is frequently required to sit.  The employee is occasionally required to stand; walk; use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 10 pounds. 
         
        Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.   
         
        Work is generally performed in a climate controlled office environment. Occasionally exposed to a climate-controlled manufacturing environment with moderate to high levels of noise.
         
        5+ years experience working in production planning in an Aerospace production environment.
         
        • PRODUCE  MASTER FILES PER CUSTOMER REQUIREMENTS
        • STRONG WORKING KNOWLEDGE OF UNDERSTANDING BLUEPRINT DEFINITIONS
        • ERP KNOWLEDGE AND UNDERSTANDING  ALL AREAS OF THE SYSTEM OF VISUAL
        • USING MICROSOFT PRODUCTS FOR DAILY JOB TASKS
        • KNOWLEDGE IN AIRCRAFT SPECIFICATIONS
        • REVIEW P.O’s  TO BE CORRECT TO QUOTATIONS SUBMITTAL FOR JOB
        • A WORKING KNOWLEDGE OF CATIA SOFTWARE FOR PLANNING PURPOSES
        • INVENTORY AND MATERIAL MANAGEMENT
        • REVIEW SPECIFICATIONS REVISION’S FOR CUSTOMER REQUIREMENTS
        • UPDATE PLANNING AND MASTER FILES
        • REVIEW QUALITY REWORK ISSUES FOR SUB-CONTRACT P.O’s

         
        Job Number: 1710066639
        Job Location: Kilgore, TX
        Duration: 4 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Enrique Perez
        Address: 3201 CHERRY RIDGE DR STE A103
        City, State: SAN ANTONIO, TX 78230-4824
        Phone: 210/524-1496
        800 Phone: 866/570-1503
        Email: cecjsanantonio@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i500000021jyvAAA&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Program Manager

        Description:
        Program Manager
        Full Time Position
        Greensboro, NC

        US Citizen, Or Greencard holder.
        Medical and dental
        401k with match
        15 holidays
        Time off during week of Christmas
        Bonus potential

        Description
         
        General Summary:
         
        We are searching for Program Managers to organize and lead projects across all phases of an aircraft component/system’s Product Lifecycle. This includes the planning, organization, and coordination of project activities with internal functional and external supplier organizations.  The individual will have the responsibility to ensure that project requirements (specifications, resources, schedule, and deliverables) are properly defined and managed through successful completion.  Prior aerospace engineering, project management, and value stream experience is preferred.  
         
        Duties and Responsibilities:
         
        Product Life Cycle Management
        Serve as project manager for assigned components/subsystems throughout product life cycle (development, qualification/certification, production, etc).
        Collaborate with functional organization leaders to develop resource plans, schedules, and deliverable milestones.
        Facilitate internal data exchange, communication, and collaboration required to ensure timely completion and transition between product phases.
        Conduct resource, capacity and capability analyses to ensure project plans and/or production introduction milestones are achieved.
        Oversee the implementation of product/process improvement initiatives.
        Supplier Management
        Facilitate the development of request for proposal packages and associated documentation (i.e Statement of Work, Technical Specification).
        Contribute to supplier evaluation, selection and contract negotiation activities.
        Manage supplier product development and qualification activities to ensure technical, cost, schedule and deliverable requirements are achieved.
        Organize and lead cross functional project status, design, and manufacturing/quality assessment reviews.
        Develop and oversee supplier resolution/recovery plans to mitigate component qualification, certification, and production delivery risks. 
        Project Management
        Develop and present project proposals for Senior Management review/approval.
        Perform business case analyses required to facilitate program investment decisions (i.e. Project funding, capital investments, and product changes).
        Utilize leadership skills and structured methods to lead problem solving initiatives.
        Actively monitor project performance and perform change management.
        Provide regular communication of project status, risks, critical issues, and associated plans to stakeholders (i.e Senior Management, Suppliers, etc.).
         
        Qualifications
         
        Education, Work Experience, Certification and/or Licensure:
        Certified Project Management Professional (PMP) - Preferred
        Bachelor's degree in Engineering
        2-5 years Project Management experience 
        Knowledge, Skills and Abilities:
        Demonstrated ability to lead complex projects in one or more areas of a Product’s Life Cycle (i.e. development, certification, production, and customer service).
        Experienced in leading Integrated Product Teams through successful resolution of technical, quality, business and/or customer oriented issues.
        Possess an understanding of Project Management processes and procedures.
        Ability to effectively communicate (verbal/ written) and present information to a broad audience, including mid-to-senior level management.
        Working knowledge of aerospace component manufacturing methods, assembly processes, and tooling design philosophies.
        Familiarity with production planning, supply chain, and quality management tools/systems – SAP experience preferred.
        Knowledge of Component Qualification and Aircraft Certification processes (ex. 14 CFR 21/23/25 AND/OR 33).
        Job Details
        City
        Greensboro
        State
        North Carolina
        The Structures Company LLC is an AA/EOE.
         
        Job Location: Greensboro, CA
        Rate: "open"
        Duration: Full Time
        Start Date: asap
        Input Date: 08/18/2017
        Firm Name: STRUCTURES COMPANY LLC
        Attention: Mark Sharp
        Address: P O BOX 2278
        City, State: SEAL BEACH, CA 90740
        Phone: 714/823-3000
        Website: www.thestructurescompany.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Project Engineer - Valves and Actuators

        Description:
        Duties:
        Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

        Skills:
        25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
        25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
        20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
        10%: Develops trade studies, design concepts, systems integration and component-level test plans.
        10%: Supplier integration with external vendors
        10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

        Education:
        Bachelor's degree in Mechanical or Aerospace Engineering.
         
        Job Number: KD374288
        Job Location: Canoga Park, CA
        Rate: $62.00
        Duration: 6+ months
        Start Date: ASAP
        Input Date: 08/11/2017
        Firm Name: CDI CORPORATION
        Attention: Kris Douglas
        Address: 17177 PRESTON RD STE 300
        City, State: DALLAS, TX 75248
        Website: www.cdicorp.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Project Engineer / Component Product Engineer (Valves & Actuators) - Level III / IV

        Description:
        Location: Canoga Park, CA
        Rate: DOE
        Duration: 6 month contract


        ** Candidates must be U.S. Citizens **
        ** Permanent residents are NOT eligible for this role **
        ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


        Duties:
        - This is NOT a Designer role.
        - Manager only wants to see local candidates at this time.
        - Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

        Skills:
        25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
        25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
        20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
        10%: Develops trade studies, design concepts, systems integration and component-level test plans.
        10%: Supplier integration with external vendors
        10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

        Education:
        -Bachelor's degree in Mechanical or Aerospace Engineering.
         
        Job Number: 7754
        Job Location: Canoga Park, CA
        Rate: DOE
        Per Diem: Split Possible
        Overtime: Possible
        Duration: 6 mos
        Input Date: 08/16/2017
        Firm Name: INCONEN CORPORATION
        Attention: Patrick O'Neil
        Address: 6133 BRISTOL PKWY STE 232
        City, State: CULVER CITY, CA 90230
        Phone: 310/410-1931
        Fax Phone: 310/410-1751
        Website: www.inconen.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Project Engineer / Component Product Engineer III - IV (Valves & Actuators)

        Description:
        Job Title: Project Engineer / Component Product Engineer III - IV (Valves & Actuators)


        Remaining Positions: 1

        Duties:
        ** Candidates must be U.S. Citizens **

        ** Permanent residents are NOT eligible for this role **

        ** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





        ** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **



        ** Manager only wants to see local candidates at this time **





        -Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.



        Skills:
        25%: Development and fabrication support of rocket engine components using engineering and scientific principles.



        25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.



        20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.



        10%: Develops trade studies, design concepts, systems integration and component-level test plans.



        10%: Supplier integration with external vendors



        10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

        Education:
        -Bachelor's degree in Mechanical or Aerospace Engineering.




        Skills:
        Required

        COMPONENT ENGINEERING
        PROJECT ENGINEER
        FABRICATION


        State/Province: California
        City/Town: Canoga Park

        Start Date: 08/28/2017
        Hours Per Week: 40.00
        Est. End Date: 02/25/2018
        Hours Per Day: 8.00
        Schedule Notes: Regular 40 hour week. OT possible.
        Days Per Week: 5.00
         
        Job Number: MB-7323816
        Job Location: Canoga Park, CA
        Rate: 49/hr max
        Duration: 6 month contract
        Input Date: 08/15/2017
        Firm Name: MIDCOM CORPORATION
        Attention: Jeana Edrozo
        Address: 1275 N MANASSERO ST
        City, State: ANAHEIM, CA 92807
        Phone: 714/630-1999
        800 Phone: 800/737-1632
        Fax Phone: 714/459-7055
        Website: www.midcom.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Quality Assurance Engineer

        Description:
        Bachelor’s degree required, preferably in Chemistry, Engineering, or Quality Management
        Minimum of 5 years prior relevant experience in a quality, engineering, or research role 2 years of which should have been Aerospace-related experience.
        Capability of working in a large, complex matrix organization with capacity to operate independently with minimal supervision.
        Strong project management, advanced communication, influencing, and negotiation skills combined with team leadership, analytical, and problem-solving acumen.
        Familiarity with quality systems including ISO 9001, AS9100 and Root Cause Analysis, and required experience with Quality Tools/Methodologies: FMEA, SPC, control plans, and MSAs.
        PDCA, LSS, Continual Improvement experience.
        Working knowledge of SAP and statistical analysis software
        ASQ certification in Quality, Engineering, and Auditing
        LSS Green belt or Black belt certification preferred
        Familiarity with FAA standards as they relate to AS910
        Review all openings posted at www.hi-tecsolutions.com/jobs
         
        Job Number: 1701429
        Job Location: Huntsville, AL
        Rate: 95-105 annually
        Duration: Direct Position
        Start Date: asap
        Input Date: 08/25/2017
        Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
        Attention: Anne Cameron
        Address: 2501 E PIEDMONT RD STE 103
        City, State: MARIETTA, GA 30062-7753
        Phone: 770/575-5855
        Fax Phone: 770/575-5856
        Website: www.hi-tecsolutions.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Quality Engineers - New Orleans, LA

        Description:
        STS AeroStaff Services is hiring Quality Engineers for open positions in New Orleans, Louisiana.

        Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

        Job Summary:

        The Quality Engineer is responsible for assuring that Companies and products will adequately meet the objectives of the contracts or sales agreements by maintaining surveillance over all phases of the product's cycle from design until successful fulfillment of intended objectives.

        Job Duties:

        • Uses operations research techniques such as cost analysis, experimentation, gaming, simulation, flow charting, information theory, and advanced mathematics in developing optimum quality plans
        • Develops overall quality plans using the systems concept identifying in terms of the product involved, general instructions, test and sampling procedures, specific parts and assembly instructions, material disposition, records, tables, charts, and graphs required
        • Acts as an advisor in all phases of statistical quality control, develops new statistical techniques and interprets significance of resulting data
        • Reviews Engineering and Manufacturing information such as new and revised designs, specifications and bills of materials; production, tool and test equipment drawings; production and tool plans; operation and routing sheets; production, storage, and shipping methods; and facility and floor space requirements
        • Acts as an advisor in his field of specialty to vendors or groups
        • Develops vendor certification and rating plans
        • Evaluates the quality and capability of vendors or potential vendors and approves such vendors
        • Plans the minimum quality standards, test, and inspection requirements and process controls
        • Performs other job related duties as assigned by management

        Qualifications:

        • Bachelor's degree in manufacturing or technical field
        • Three plus years of related quality experience
        • Experience working in quality engineering department preferably in a marine/military/aerospace industry is a plus
        • Working familiarity and knowledge of ISO 9001 quality standards and programs
        • Familiarity with government contracts desirable
        • Familiarity with military standards and specifications and able to read, interpret mechanical and electrical drawings and schematics desirable
        • Excellent communication skills both written and oral
        • Ability to interact effectively with management, peers and other employees relative to quality and technical issues
        • Ability to work independently with minimal oversight
        • Attention to details
        • Proficient in MS Outlook, Word and Excel
        • ASQ member, ASQ/AWS/ASNT certifications desirable

        Benefits:

        STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

        We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

        Thanks for taking the time, and we look forward to hearing from you soon.
         
        Job Number: 39476
        Job Location: New Orleans, LA
        Rate: DOE
        Per Diem: No
        Overtime: Possible
        Duration: Temp
        Start Date: ASAP
        Input Date: 08/01/2017
        Firm Name: STS AEROSTAFF SERVICES
        Attention: STS AeroStaff Services
        Address: 2000 NE JENSEN BEACH BLVD
        City, State: JENSEN BEACH, FL 34957
        800 Phone: 877/707-5767
        Fax Phone: 877/707-5767
        Website: www.stsaviationgroup.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Quality Systems Specialist 3

        Description:
        Quality Systems Specialist 3

        Location: New Orleans, LA
        Duration: 1 year

        Skill Code: J03-Configuration Assurance

        Job Description:
        Reviews proposals, contracts, regulatory, program and customer requirements ensuring early quality involvement in program development. Prepares and maintains Quality directives, policies, processes, procedures and metrics to assure program, contract, customer, regulatory requirements, international standards and working agreements are deployed. Analyzes process data, metrics, models and flows to identify root cause of problems. Participates with stakeholders to develop potential preventive or corrective actions and implementation. Conducts research, compiles and analyzes performance reports and process control statistics, to continuously improve process capability. Conducts quality source selection and process reviews of suppliers'' ability to meet program quality requirements and support business decisions, and develops a coordinated response for management review and approval. Conducts hardware, software and system level audits to determine compliance with quality management system standards, configuration assurance, related business, regulatory and customer requirements and reports results to management. Analyzes data to provide material review dispositions for nonconforming materials, parts and equipment. Works under general direction. Reviews and validates product non-conformances and disposition type, quality procedures and engineering requirements. Performs analysis to identify and evaluate the quality of products, operations and processes to Quality Management System requirements, applicable company procedures, contract requirements, or government regulations. Applies knowledge of aerospace design, systems and integration to perform failure and forensic analysis of aerospace components and systems. Assesses impact or health of quality relative to the business system or value stream. Interfaces with Company employees, suppliers, customers and regulatory agencies to ensure compliance with contractual, Company and regulatory requirements. Assures problem resolution or implements corrective/preventive action and documents resolution. Obtains corrective action on nonconforming plans and hardware/processes.

        This position is with the client Exploration Launch Systems supporting production of the NASA SLS Core Stage and is based at the NASA Michoud Assembly Facility in New Orleans, Louisiana.

        Education / Experience:
        Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience
         
        Job Number: 17-13524
        Job Location: New Orleans, LA
        Per Diem: Split
        Overtime: possible
        Duration: 1 year
        Start Date: 8/25/17
        Input Date: 08/02/2017
        Firm Name: ICONMA LLC
        Attention: Constance Whitcomb
        Address: 4620 E 53RD ST
        City, State: DAVENPORT, IA 52807
        Phone: 312/502-4795
        Website: www.iconma.com

        R/M Eng

        Description:
        PDS Tech is looking for a Reliability-Maintainability Engineer for our client in Lexington Park, MD
        Specific tasks include:
        Support daily event entry into FRACAS database via review of operations, test logs and NAVAIR maintenance databases; capture event evidence via interviews with maintainers, pilots, Marine maintainers, photos, test/data logs, etc. Ensure tagging/isolation of parts for Root Cause /Corrective Action analysis via working with Quality and IPT members and to ensure proper component disposition prior to return to Supplier
        Support daily joint preliminary-scoring with NAVAIR team members.

         

        A.S. degree in Mechanical, Electrical or Aerospace Engineering, preferred but not required and may be waived if candidate has suitable practical experience, such as the following:.
        Previous commercial A&P or military aircraft maintenance preferred, previous experience in aircraft test operations support. Military maintenance background on H-53 aircraft is also preferred.
         


         
        Job Number: 1610058435
        Job Location: Lexington Park, MD
        Per Diem: No
        Duration: 24 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Ryan Bushey
        Address: 50 FOUNDERS PLAZA STE 304
        City, State: EAST HARTFORD, CT 06108
        Phone: 860/289-2643
        800 Phone: 866/636-4723
        Fax Phone: 800/556-5284
        Email: northeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FjXwAAK&URLSource=cjhunter

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Real Time Test and Simulation Engineer

        Description:
        Real-time Test and Simulation Engineer
        Greensboro, NC
        Full Time Position

        US Citizen, Or Greencard holder.
        Medical and dental
        401k with match
        15 holidays
        Time off during week of Christmas
        Bonus potential

         
         
         
        General Summary: 
         
        The Engineer, Real-time Test and Simulation position is responsible for developing, testing and enhancing aircraft integration software and hardware and supporting the tool and process associated with Real-time Test and Simulation Systems (RTSS).
         
        Duties and Responsibilities:
        Develops and enhances hardware and software in the Advanced Systems Integration Test Facility (ASITF) for current and future programs.
        Develops simulation software, user interfaces and associated documentation to support testing.
        Develops and enhance automated regression and Safety of Flight tests for various systems groups.
        Creates real-time prototypes of advanced aircraft systems and develop capabilities and facilities in support of advanced research projects.
        Develops Model Based Development (MBD) processes and environments for real-time advanced prototyping with a long term objective of leading to a production capable MBD software development.
        Assists in the configuration management and control of the facility’s hardware and software systems.
        Assists system test engineers as required with their test development and during their testing.
        Mentors other engineers on real-time test and simulation.
        Defines and improves Systems Engineering Processes (SEP) associated with systems integration testing and advanced Model Based Development (MBD).
        Reviews systems requirements, ICDs, electrical drawings, test plans, system safety documentation, and system performance analysis.
        Qualifications
         
        Education, Work Experience, Certification and/or Licensure:
        Bachelors’ degree in Aerospace, Electrical, Software Engineering, or other related field required.
        5+ years of direct engineering experience in actual development programs, including requirements development, design, integration, testing and system troubleshooting experience.
        Previous experience in HIL (hardware-in-the-loop) simulation and test automation.
        Previous experience within the aviation/aerospace industry.
        Knowledge, Skills and Abilities:
        Working knowledge of FAA & EASA certification requirements, including airworthiness and operational requirements.
        Working knowledge of Mathworks MATLAB/Simulink.
        Working knowledge and familiarity with dSPACE or other real-time testing / test automation platforms.
        Working knowledge with scripting languages such as Python and JavaScript is preferred.
        Previous experience with HTML is preferred.
        Previous experience with SCADE (display and controls) tool set highly preferred.
        Strong analytical skills required.
        Previous experience with tools for Requirement Management, Defect Tracking, Configuration Control and Version Control.
        Proficiency with DOORS and PLM tool (TeamCenter, etc.) preferred.
        Ability to communicate effectively (written and oral) through all levels within the company.
        Job Details
        City
        Greensboro
        State
        North Carolina
        The Structures Company LLC is an AA/EOE.
         
        Job Location: Greensboro, NC
        Rate: open
        Duration: Full Time
        Start Date: asap
        Input Date: 08/18/2017
        Firm Name: STRUCTURES COMPANY LLC
        Attention: Mark Sharp
        Address: P O BOX 2278
        City, State: SEAL BEACH, CA 90740
        Phone: 714/823-3000
        Website: www.thestructurescompany.com

        SECRET Product Repair/Mod Tech C

        Description:
        PDS Tech is seeking a Product Repair/Mod Technician for an open position in Ridley Park, PA
         
        Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction.
         
        •             Possess a minimum of 7 years of direct aviation experience
        •             Possess a minimum of 4 years of direct practical experience (trade specific)
        •             Possess a minimum of 5 years of direct CH-47 aircraft type experience, or for, Airframe Structures Maintenance Technician, 5 years of appropriate helicopter airframe experience to include the CH-47 aircraft type
        •             Possess an FAA Airframe/Powerplant (A&P) mechanics license, Transport Canada Civil Aviation (TCCA) Aircraft Maintenance Engineer (AME) license or Military equivalent
         
         
        Job Number: 1710069133
        Job Location: Ridley Park, PA
        Duration: 6 months
        Input Date: 01/19/2018
        Firm Name: PDS TECHNICAL SERVICES
        Attention: Patrick Mahoney
        Address: 300 E JOHN CARPENTER FWY STE 700
        City, State: IRVING, TX 75062
        800 Phone: 866/224-2745
        Email: southeastjobs@pdstech.com
        Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K1U8AAK&URLSource=cjhunter

        Safety Engineers -- Aerospace

        Description:
        Job location: Overseas

        Contact:
        Morgan at (585) 441-9800 x104 or
        Nicholas at (585) 441-9800 x126


        Paid Travel
        Great Hourly Rates
        Direct Deposit
        Per Diem
        Tax Benefits
        Healthcare Options
         
        Job Location: Overseas/International
        Input Date: 03/27/2017
        Firm Name: NORAMTEC CONSULTANTS AMERICAS INC
        Attention: Morgan or Nicholas
        Address: 150 RESEARCH BLVD
        City, State: ROCHESTER, NY 14623
        Phone: 585/441-9800 x104 or x126
        Email: morgan.ricklefs@noramtecna.com; nicholas.salsedo@noramtecna.com
        Website: www.noramtec.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Scheduler

        Description:
        Contract

        Unique Skills:
        Successful candidates will have demonstrated excellent communication and customer service skills, the ability to organize and prioritize data and handle multiple concurrent tasks. Aerospace background, mechanical or technical experience desired.

        Education and Experience Requirements:
        High School diploma/GED. Must be computer literate and able to use Microsoft Word and Excel. Three (3) years of aviation experience. Current working knowledge of applicable FAA regulations is required. Must be familiar with foreign certification requirements. A & P license or FCC certification is preferred.

        Position Purpose:
        Under general supervision, assist with the scheduling of maintenance requirements for Gulfstream facilities.

        Principal Duties and Responsibilities:

        Essential Functions:
        1. Maintain Master Scheduling Office controlled ASC material and manpower. Work with Gulfstream buyers and OEM buyers to maintain established aircraft schedule.
        2. Manage master scheduling programs such as 36-150APU, Enhanced Flight ID Transponder pool, Aircell/Irdium phone programs and other programs as assigned.
        3. Assist with yearly meeting of all facility scheduling personnel.
        4. Assist with the notification of upcoming alert ACBs and ASCs. Assist with the coordination of NetJet/EJI maintenance at Gulfstream facilities.

        Additional Functions:
        1. Maintain complete and accurate records/files of all business transactions.
        2. Perform other duties as assigned.

        Languages Required (in addition to English): English
         
        Job Number: 10008
        Job Location: Savannah, GA
        Rate: OPEN
        Per Diem: YES
        Overtime: Possible
        Duration: LT
        Start Date: ASAP
        Input Date: 07/31/2017
        Firm Name: ADVANCED TECHNOLOGY
        Attention: Chris Lombardi
        Address: 15 KENNETH MINER DR
        City, State: WRENTHAM, MA 02093
        800 Phone: 877/334-7700
        Fax Phone: 877/335-7700
        Website: www.advancedtechno.com

        THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
        Senior System Engineer

        Description:
        TAD PGS, INC. is currently seeking a Senior Systems Engineer for one of our clients in Wilmington, MA.

        **Candidate must be possess TS/SCI (SSBI) Security Clearance.**

        Company Description:
        Go Beyond. It’s more than a phrase. It’s the way our client lives and the way they work, the way they are seen by our customers and our employees. They never compromise on their promise to Go Beyond. It is who they are, for more than a decade they have delivered superior performance. They are known for our ability to combine know-how and technology quickly and effectively to create solutions. Join their team and their proven promise of integrity, accessibility and continuity. They want you to join them and Go Beyond.

        Job Overview:
        This position requires the ability to understand all levels of requirements including direct customer negotiation and flow-down. Must have the ability to work with I&T engineering to develop verification and validation requirements. Experience in the development and ownership of detailed CDRL's (CONOPS, Initialization, etc) are also required. The ideal candidate will have a strong, multi-discipline technical background and will work directly with internal technical IPT's developing requirements and associated documentation, as well as take a lead role in back and forth requirements development with the customer and associated sub-contractors.

        Basic Hiring Criteria:
        BS in an Engineering discipline.
        Minimum of nine years of verifiable experience in developing electro-optical payloads for aerospace & military defense applications.
        Desired Qualifications:
        Masters preferred.
        Expert knowledge in system level development, requirements definition, analysis, and risk mitigation for space-based environments.
        Expert in the development of requirements documentation for multi-segment space payloads.
        Experience with Verification and Validation requirements.
        Experience with high reliability space flight programs and radiation-hardened environments are required.
        Experience as a lead engineer, project engineer, or IPT lead is required.
        Experience developing systems and general engineering processes and procedures are desired.
        Experience generating requirements using DOORS is preferred.
        Excellent presentation skills for interfacing with senior management and customers as well as mentoring of other engineers.
         
        Job Number: 25556
        Input Date: 08/09/2017
        Firm Name: TAD PGS INC
        Attention: Thomas Fulton
        Address: 12062 VALLEY VIEW ST STE 108
        City, State: GARDEN GROVE, CA 92845
        Phone: 714/622-3967
        800 Phone: 800/261-3779
        Fax Phone: 714/897-8455
        Website: www.tadpgs.com