Job Search Results

796 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/09/23 Sunday 10:45PM Pacific Time by ContractJobHunter. )

Listings 1 - 796

Go To My Job Tracker

Expand all descriptions

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 12/19/2016
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
DIRECT HIRE positions in TX, IL and GA.

A valid FAA approved Airframe and Power plant (A&P) Certificate

5-7 years of experience.

Must be able to work 2nd or 3rd shift (graveyard).

TFE 731 Engine experience preferred.

Must have proven mechanical and technical aptitude.

Must have proven experience using a variety of hand and/or power tools.

Analytical skills required to perform complex mechanical troubleshooting.

Strong communication skills required, both verbal and written.

Responsible for knowing, understanding, following, promoting and continuously improving company policies and procedures.

Utilizes mechanics hand tools, precision measuring instruments, gauges and calibration test equipment.

Observes all safety, environmental and general housekeeping rules and policies. Encourages others to work safely.

Able to work with high attention to detail.

Demonstrates the ability to get results despite workload, competing demands, and a fast-paced environment.

Demonstrates positive working relationships with co-workers.

Must be able to lift up to 75 pounds, walk, bend, stretch, and climb ladders.

Must have the ability to think clearly, speak intelligibly on the telephone and in person.

Must have the ability to manipulate equipment of all sizes, tools, computer keyboards, and telephones.

Must be able to see to disassemble and visually inspect.

Must be able to hear to detect the sources of problems.

Must have excellent hand-to-eye coordination.
 
Job Location: IL,TX, GA
Overtime: YES
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 02/19/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 02/22/2018
Last Updated: 02/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 12/04/2017
Last Updated: 03/15/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers - Atlanta, GA

Description:
Now Hiring Aerospace Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Engineer jobs in Atlanta, Georgia. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best aerospace engineering jobs in Atlanta, Georgia; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Duties:

• The successful candidate serves as an engineer driving commercial aircraft sheet-metal and composite component repair and vendor oversight
• Reviewing data and recommending and implementing changes as required
• Reviewing, recommending, and implementing manufacturers' service bulletins and other correspondence to affected components
• Maintains compliance with applicable FAA, DOT, OSHA and EPA regulations, foreign regulatory requirements and Technical Operations Policy and Procedures (TOPP) and all other engineering processes
• Providing status for projects/issues through various briefings and documentation
• Preparing and conducting Engineering Working Group meetings
• Revising numerous FAA approved Manuals and Engineering Reports
• Collaboration and constant communication with Manufacturers and the FAA ACO and FSDO/CMO
• Irregular shift hours may be required, on rare occasion, due to critical requirements
• This may include weekend work depending on criticality of the issue
• Occasional travel is required to support the programs
• This position will focus, initially, on aircraft composite & mechanical component systems
• This position reports to a lead engineer and the Manager of Component Engineering

Qualifications:

• Bachelor Degree in Engineering with 0-5 years’ aviation related experience focus on repair development
• Previous airline, military, OEM or MRO experience with commercial aircraft is preferred
• Familiarity with airline flight operations and support systems, 14 CFR 121 dispatch regulations and 14 CFR 145 repair station regulations are highly desired
• Understanding of composite structure related to aircraft Thrust Reverses is preferred, but not required
• Must have strong customer service orientation and relationship management skills, strong project management skills; written and verbal communication skills; multi-tasking abilities; proven results-orientation; and strong analytical, organizational and time management skills
• Strong knowledge of Microsoft Office products and AUTOCAD, or similar, is desired
• Accurately anticipates the not so obvious impact of various solutions to technical problems
• Provides feasible alternatives to solve complex problems which require the regular use of ingenuity and creativity

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40578
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Engineers - Orlando, FL

Description:
Now Hiring Aerospace Mechanical Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Mechanical Engineer jobs in Orlando, Florida. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Orlando, Florida; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Mechanical Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• The candidate will be responsible for the thermal design, analysis, and testing of assembly systems, subsystems, and components
• Tasks include performing preliminary and detailed thermal analysis on assembly systems and subsystems as well as performing comprehensive modeling of the entire thermal system using standardized processes and tools
• Tasks may also include providing support for thermal testing of systems, subsystems, and components
• In addition, the candidate will provide technical documentation and input to data packages to support peer and customer reviews, present analysis data to program and customer personnel at technical interchange meetings and design reviews
• Candidate will perform heat transfer using standardized thermal software tools, analyze thermal management systems, and coordinate requirements and design solutions with program personnel
• Responsible for research and development of viable thermal solutions for systems and components
• Experienced with relevant analytic tools for thermal analysis

Required:

• MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering, or related field or a BS with at least 2 years’ Thermal Analysis experience in the aerospace industry
• Experience with thermal design of assembly systems, subsystems, and components
• Demonstrated strength in thermal analysis with a desire to learn more and demonstrated strong problem solving and analytical skills
• Experience performing heat transfer analysis
• Excellent writing and verbal communication skills for generating thermal plans, thermal analysis reports, documentation, and potentially proposals are necessary
• Candidate must be able to obtain a security clearance

Preferred:

• Experience with CAD modeling using PTC CREO, FORTRAN programming, CFD software (Star CCM+, FlowEFD), and Siemens NX CAD and Thermal/Flow software suite
• Experience with MATLAB and Mathcad
• Creativity/innovation to solve issues related to thermal design performance of any aspect of thermal systems
• Experience developing and analyzing in thermal design of thermal management systems
• Experience calculating internal and external convection coefficients of simple and complex geometries and being able to research literature when necessary
• Experience writing environmental and component specifications, and system/subsystem/component test plans
• Considered an emerging authority

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40586
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is hiring Aerospace Quality Inspectors in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.


Job Summary:

As a quality inspector you will be responsible for being the last line of defense in assuring mission success. You will perform in-process inspections and verify that all key performance and design characteristics are met or exceeded during test preparation and acceptance testing. You will be working hands on with the most cutting edge rocket technology currently available and will be part of history.

Job Duties:

• Perform receiving, in process, and final inspection on structures and propulsion major subassemblies, including mechanical, electrical, electro-mechanical, pneumatic and hydraulic parts, components, and sub-assemblies
• Inspect, verify, and proactively support structures and propulsion development and acceptance testing; assuring adherence to design, specification, and testing requirements
• Assist with the specification, purchase, and maintenance of calibrated measuring and test equipment
• Communicate and help resolve quality related issues as they relate to the site and other company locations i.e. launch site, production, and manufacturing
• Process non-conforming product

Basic Qualifications:

• Associate’s degree in relevant field
• Minimum of 3 years’ of experience in an aerospace environment

Preferred Skills and Experience:

• Airframe and power plant license
• Knowledge of quality assurance principles, methods, and processes
• Knowledge of avionics and electrical systems
• Knowledge of aerospace propulsion and principles
• Knowledge of aerospace structures
• Knowledge of GSE systems and general associated equipment
• Strong knowledge and experience in aerospace standards and its general practices
• Intermediate skill level with Windows operating systems
• Intermediate skill level with Microsoft Office (Excel, PowerPoint, Word, Outlook)

Additional Requirements:

• Ability to work at elevated heights
• Physical effort including standing, lifting and carrying moderately heavy materials or equipment up to 35lbs.
• Typically exposed to work in extreme outdoor environments – heat, cold, rain
• Work occasionally performed in an environment requiring exposure to fumes, odors, and noise
• Typically 50 hour work weeks, schedule varies depending on site operational needs

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40597
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Inspectors - Jacksonville, FL

Description:
Now Hiring Aircraft Inspectors!

Overview:

STS AeroStaff Services is now offering Aircraft Inspector jobs in Jacksonville, Florida. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best inspection jobs in Jacksonville, Florida; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aircraft Inspector, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• Verifies product conformance to design requirements
• Validates work instructions, tooling requirements, certifications, process standards, policies and procedures
• Identifies and documents discrepancies
• Segregates and controls non-conforming items to prevent unintended use or delivery
• Verifies compliance to customer requirements
• Identifies opportunities for corrective action while performing product or process verification
• Follows established procedures for completing work tasks within own work group
• Watches over job processes, tasks, and work products to ensure freedom from errors, omissions, or defects
• Usually initiates action to correct routine quality problems

Qualifications:

• Preferred F-16 and/or F-18 experience
• Basic ability to read, understand, and interpret engineering drawings and specifications
• Basic knowledge of precision measurement tools and techniques for the inspection and validation of mechanical test hardware components and assemblies (e.g. conventional gages and measurement tools, CMM, laser tracker, theodolites)
• Familiarity with associated validation software for comparative analysis
• Basic ability to document and report on results, and address discrepancies
• Basic knowledge of Quality System processes, quality documentation and paper flow
• Basic knowledge in one or more of the following: repair concepts including repair station processes, component repair concepts, procedures, and warranty processes and contractual agreements

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40526
Job Location: Jacksonville, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/02/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 01/10/2018
Last Updated: 01/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
160536/14657
Title Airframe Design Engineer
55/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:
•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.

- Experience with NX and FiberSIM highly desired

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 55/hr max
Duration: 6 month contract
Input Date: 11/13/2017
Last Updated: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Induction Engineers - Las Vegas, NV

Description:
Now Hiring Aviation Induction Engineers!

Overview:

STS AeroStaff Services is now offering Aviation Induction Engineer jobs in Las Vegas, Nevada. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Las Vegas, Nevada; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aviation Induction Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Job Summary:

Will be supporting client’s engineering activities for some used aircraft that will be inducted into client’s fleet.

Essential Duties & Responsibilities:

• Will be reviewing the existing aircraft configuration, determining which mods/SBs/ADs need to be embodied during the induction check, and generating the associated engineering documentation

Qualifications:

• The ideal candidate would be well versed in Airbus A320 family avionics and/or systems OR interiors
• A bachelor's degree in Aerospace, Electrical or Mechanical Engineering is required
• Previous airline or MRO engineering experience with Airbus aircraft
• Must be able to read and interpret technical drawings and related information. (e.g. wiring diagrams)
• Should have the ability to effectively generate detailed engineering documents
• Should have the ability to interpret analytical reports, FARs, ADs and other engineering documents/drawings
• Must be able to make sound engineering decisions and develop the documentation to support these decisions

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40596
Job Location: Las Vegas, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 11/01/2017
Last Updated: 12/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 10/13/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer IV / Cable Harnesses

Description:
-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.
-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
-Experience is design of cables and harnesses for applications for Aerospace products.
-Proficiency in use of Creo PDM/Link and Windchill.
-Additional proficiency with GD&T and tolerance analysis.

• Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
o Previous experience with MODELCHECK preferred
• Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
o Large Assembly Management, Simplified Representations, Combination States
o Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
o Mechanism Design
o Advanced part modeling techniques including the use of relations, analysis features, and flexible components
• Experience with Creo Cabling including
o Utilizing logical reference data (automated routing)
o Harness flattening using Creo Harness-MFG extension
• Working knowledge of Creo Schematics 2.0 desired including:
o Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog
• BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 7461434
Job Location: Canoga Park, CA
Rate: OPEN DOE
Duration: 6-12 Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 11/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-024
Job Location: Greensboro, NC
Rate: Up to $60/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/17/2018
Last Updated: 09/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
Required Skills:

Must have the knowledge, skill, and ability to meet expectations for required competencies in position, which includes: 1) safety, health, and environmental awareness, 2) business ethics and compliance, 3) technical/professional competence and quality & time management, 4) interpersonal relations and communication skills, 5) initiative, flexibility, innovation, and adaptability, 6) continuous improvement and problem solving, and 7) planning and organizing.

Ability to read precision measuring instruments.

Ability to read shop production blueprints.

Mechanical aptitude and strong attention to detail.

Ability to follow directions during production and follow all safety protocols.

Basic understanding of machine set-up.

Blueprint training course.

Machine shop experience and/or OJT.
 
Job Location: Wichita, KS
Rate: 18.00
Overtime: Yes
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: APA SERVICES
Attention: Kami M Muehlberger
Address: 4150 INTERNATIONAL PLZ STE 510
City, State: FORT WORTH, TX 76109
800 Phone: 888/272-7868
Fax Phone: 800/285-8805
Website: www.apaservices.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Calibration Technician/Engineer

Description:
1st and 2nd shift available

Job Description
Mechanical Component Calibration lab technician capable of working from Engineering drawings with limited guidance to fabricate and install mechanical load and data acquisition systems required to support ongoing Engineering Ground and Flight Test Development programs.

Duties and responsibilities include the calibration of aircraft and ground test development components, the acquisition and evaluation of their test data, as well as wiring and check out of Ground Test Instrumentation systems.

Must be able to work at heights.
 
Job Number: CT39318
Job Location: Stratford, CT
Rate: $40.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 10/31/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 04/03/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 04/03/2018
Last Updated: 05/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Door Engineer

Description:
Composites Door Engineer guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions: 1. selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative CATIA V5 Experience Required Mechanical Systems Experience Required Composite Door Experience Desired Supplier Management Experience Desired


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs. in the specific technical discipline or 15 yrs. broad engineering experience in several technical disciplines with Bachelors, or 8 yrs. in the specific technical discipline with Masters, or 6 yrs. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contingent - Test Engineer

Description:
Noise and Vibration test engineer with experience in one or more of the following areas: vehicle acoustic material package development, powertrain/driveline noise and vibration, modal analysis, structure-borne noise, tire and road noise analysis. Experience with vehicle testing on road and in lab environments using data acquisition equipment (LMS testlab a plus) is required. Candidate must have at least a B.S. degree in Mechanical Engineering.
 
Job Number: NSR3004TE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/15/2017
Firm Name: NSR GROUP
Attention: Kikuko Ono
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Engineer Contractor 3

Description:
Unique Skills:
The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration. Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred. Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation. Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering related field preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 117526
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/31/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Eng II

Description:
Unique Skills:

Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 118508
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV CA

Description:
160469/7457002

Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
Canoga Park, CA
60/hr max

Duties:

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE
Additional Skills:
PACKAGING ENGINEERING
HARNESS CABLING

# of Positions: 5

Location:
Canoga Park, CA


Schedule:
Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457002
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/09/2017
Last Updated: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DER Electro-Mechanical Systems Eng Landing Gear & Hydraulic Systems

Description:
DER Electro Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Savannah, GA
Rate: $135/HR
Long Term contract

Unique Skills:

- Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Company ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Company ODA projects and released engineering deliverables across the G650, G550, and G450 platforms - Previous Company experience in the above noted areas and Company aircraft platforms, as well as with Gulfstream associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 7930
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/31/2017
Last Updated: 01/30/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/20/2017
Last Updated: 12/18/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **

** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
•Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent. MS degree is desired.
 
Job Number: 8029
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/04/2017
Last Updated: 01/16/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred**

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T.
- Higher level certifications are preferred.
- Windchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent.
- MS degree is desired.
 
Job Number: 8028
Job Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 10/09/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Sr. Designer to support program initiatives. Creates innovative and practical mechanical and electro-mechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.

Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to provide direction to a design team.
 
Job Number: 41026
Job Location: AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 3 mos +
Start Date: ASAP
Input Date: 11/02/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Director of Engineering

Description:
Director of Engineering

Job Summary

Responsible to lead the Engineering team in the research, development, design, and certification of aircraft components. Plan and direct all aspects of engineering including mechanical, structural, and avionics design, stress analysis, testing, and document control. Oversee the financial budget and manage the organization’s manpower planning. Responsible for maintaining project budgets and schedules.

Supervisory Responsibilities
•Directly supervises employees in the Engineering department.
•Carries out Supervisory responsibilities in accordance with the organization’s policies and applicable laws.
•Responsibilities include interviewing, selecting, hiring, and training employees, planning, assigning and directing work; appraising performance, rewarding and disciplining employees, addressing complaints and resolving problems.
•For Exempt Managers: Managers that carry out these responsibilities for two or more employees will have significant input in hiring and termination decisions.

Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, company will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.


Education & Experience
•Bachelor’s degree in Mechanical, Electrical, or Structural Engineering from four-year college or university; and eight to ten years related experience and/or training; or equivalent combination of education and experience.
•Master’s degree in Engineering or other relevant discipline preferred.
•10 years’ experience in engineering management in a substantive airframe or Medevac/Aeromedical Evacuation related organization

•5 years’ experience managing a wide range of projects from small to large

•1-2 years’ experience in aircraft delivery operations
•Expertise in developing and executing operating budgets
•Experience with quality management systems and/or regulatory compliance desired
•Experience in project/program management preferred

Skills
•Strong interpersonal skills and a high degree of collaboration at all levels.
•Demonstrated ability in process improvement
•Ability to manage people in different project teams and functional roles.
•Excellent communication and presentation skills, both written and verbal.

Computer Skills
•Proficient with Microsoft Office Suite, including Word, Excel, PowerPoint and Outlook.
•CAD/CAM/CAE/EPDM
•Inventor
•SolidWorks
 
Job Number: 52701
Job Location: Englewood, CO
Duration: Direct Hire
Start Date: ASAP
Input Date: 11/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Instrumentation Engineer 377563

Description:
• Candidates should have experience with Creo Parametric and Creo Cabling.
• Experience with Creo Schematics; Windchill; and Modelcheck preferred
• Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.
• Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.
• Experience is design of cables and harnesses for applications for Aerospace products.
• Proficiency in use of Creo PDM/Link and Windchill.
• Additional proficiency with GD&T and tolerance analysis.
Skills:
• Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
• Previous experience with MODELCHECK preferred
• Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: Large Assembly Management, Simplified Representations, Combination States Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps Mechanism Design
• Advanced part modeling techniques including the use of relations, analysis features, and flexible components
• Experience with Creo Cabling including Utilizing logical reference data (automated routing) Harness flattening using Creo Harness-MFG extension
• Working knowledge of Creo Schematics 2.0 desired including: Block Diagram to Wiring Diagram
• Schematic Development (aka BID to WID) Diagram creation utilizing a Central Catalog
Education:
• BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 377563
Job Location: California, Canoga Park
Rate: Negotiable
Duration: 6 months +
Input Date: 10/31/2017
Firm Name: CDI CORPORATION
Attention: Jenesis Omaga
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

Electrical Technician

Description:
One year in length
Maximum Hourly pay rate $18.00
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 

 
Job Number: 1710063131
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 01/31/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002G9j8AAC&URLSource=cjhunter

Electro Mechanical Assembler

Description:
 
PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
 PDS Tech is seeking Assemblers for open positions in Redmond, WA.
Assembles fabricated parts at floor stations. Tests and calibrates parts and mechanisms to meet tolerances and product specifications. Uses hand tools and power tools to assemble units according to product specifications. Specific tools used will be tweezers, vacuum wands and torque drivers. Identifies units that fail tests or tolerance levels and repairs as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. May require 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision, and reports directly to an area Supervisor. Primary job functions do not typically require exercising independent judgment.
***candidates must have computer skills and be familiar of how to use a computer***
Requires a verifiable high school diploma or its equivalent.
Experience working with microscope; working with microscopic components
 Must be comfortable with microscope work
 Soldering skills/experience required
Must be able to us tweezers, vacuum wands and torque drivers.
Must be able to follow direction, documentation and listening to instruction.
Understanding and awareness of chemicals in the work area
 Must have computer skills
Has knowledge of commonly-used concepts, practices, and procedures within a particular field.
Must be comfortable working in a hood and a Clean Room gown all day
This is an opportunity for contract to hire based on individual work performance, attendance/dependability and Honeywell business needs.
 Work Schedule :
2nd Shift 1500-2330 PST  Mon-Fri
3rd  Shift 2230-0700 PST  Mon-Fri
5th  Shift 1830-0700 PST  Fri -Sun
 
Rates: 
•  2nd shift   “    $ 18.00 Hr.
•  3rd shift    “    $ 19.00 Hr.
•  5th shift    “    $ 19.00 Hr

Candidates must be of U.S. Citizenship OR Green Card Holders
 The minimum level of education required for ISC assignments is High School diploma/GED. Suppliers should obtain a copy of the candidates highest level of education (HSD/GED or degree) to avoid delays in onboarding
 
Job Number: 1710075032
Job Location: Redmond, WA
Duration: 12 months
Input Date: 10/09/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: John Blackmore
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023KWVAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Technicians (3 Openings)

Description:
One (1) Cable & Harness Specialist / Technician
> 3 – 5+ years extensive experience specialized in cable and harness fabrication / building; someone with heavy Wiring Harness Fabrication (Wire gauges, various types of sheathing, etc) experience.

Two (2) Electro-Mechanical Technicians (
> See “Must have Electro-Mechanical experience with:” below

Job Description:

> Assemble electrical, electronic and/or electro-mechanical assembles, subassemblies or parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, schematic, etc.) into sub-units or complete units.
> Wire electronic components, per manufacturing documentation, into sub-units or complete units
> Responsible for soldering and crimping connectors
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality and engineering standards
> Responsible for testing of all electronic assemblies
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Job Requirements:

> 5+ years’ experience in manufacturing/production environment with High School Diploma and US Citizenship required
> Must have Electro-Mechanical experience with:
o Soldering (Cup solders)
o Crimping of various terminals (Barrel, Machine, MIL-SPEC, Various ring terminals, RJ 45, BNC)
o Schematic reading and comprehension (Mechanical and Electrical)
o Measuring tools (Calipers, Multi-meters, etc.)
o Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)

Preferred Experience:

> Direct experience with Military / Government Contracts within a manufacturing environment
> Preferred Certifications (Current or Non-Current): IPC-A-610, IPC-A-620 or CIS IPC A J-STD-0001
> Experience working in a quality controlled environment

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 039_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 01/22/2018
Last Updated: 04/02/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Electronic Troubleshooter

Description:
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
Tests and troubleshoots electronic products using standard and specialized test equipment. 

1. Troubleshoots electronic products to sub-assembly and component level utilizing schematics and standard troubleshooting practices and procedures 
2. Sets up test equipment and tests electronic products using established test procedures and schematics
3. Provides technical guidance to assemblers and re-work assemblers 
4. Performs cross functional tasks within fairly similar situations resulting in standardized but not identical outcomes

5. Knowledge of the operation and use of electronic production test equipment and hand assembly tools used in a high tech surface mount & through-hole technology manufacturing and production environment
6. Knowledge of advanced electronic test and troubleshooting techniques to component level.
7. Uses product test and measurement equipment, digital/analog voltmeters, oscilloscopes, hi-pot meters, power supplies, and automatic and standard test equipment, etc.
8. Recommends and/or proposes process improvements 
8. Ensures that all relevant quality information/feedback is provided 
10. Utilizes written or visual instructions involving use of quantitative information from specifications, schematics, graphs, pictures, gages, etc.
11. Provides written and/or oral communications concerning a variety of situations following test, troubleshooting, examinations, etc.
12. Keeps workstation, tools and equipment in a neat and orderly manner 
13. Understands and complies with all Company, safety rules and regulations

Requirements/Knowledge: 

v Education Required:
o Associate degree in Electronics (2 year) or certified program (18 mos.) plus 1 year of experience

v Experience 
o 1-3 years of electronics related experience

v Skill Level Required: 
o Skills required in maintaining close specifications using tools & gages, schematics and a variety of electronic equipment 

o Should have a high level of electrical and mechanical aptitude and analytical skills
o Ability to interpret drawing and specifications
o Basic computer skills
o Knowledge of manufacturing processes and how to effectively troubleshoot problems
o Should possess dexterity skills, good hand & eye coordination 
o Willing and able to take and pass basic electronics test 

Desired Qualifications:

v Past experience in a manufacturing environment
v Past experience in a self-directed teaming environment
v Lean manufacturing knowledge
v Understanding of IPC-A-610 standards
 
 
Job Number: 1710066458
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 04/07/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021ioWAAQ&URLSource=cjhunter

Electronics Technician

Description:
Chipton-Ross is seeking a Electronics Technician in Santa Barbara, CA.

Description
Provides engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Skill/Experience/Education
Mandatory:
Integrated Circuit Layout Technician. SBF is seeking an experienced integrated circuit technician to help advance the state of the art in infrared and visible imager readout integrated circuits (ROICs). Significant experience with physical layout of mixed signal VLSI CMOS transistor level designs is required. The selected candidate will perform silicon layout of analog and digital submicron transistor level designs in support of advanced infrared cameras and imagers. Designs include ultralow noise analog circuit blocks, low power analog to digital conversion, high speed multi GHz data transmission and serializers. MUST HAVE CMOS integrated circuit layout experience.

Desired:
Schematic capture, design verification and simulation.
 
Job Number: 165226
Job Location: Santa Barbara, CA
Rate: $DOE
Duration: 12 months
Input Date: 09/13/2017
Last Updated: 09/23/2018
Firm Name: CHIPTON ROSS
Attention: Brent Sizemore
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bsizemore@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine Control Logic Analyst

Description:
Engine Control Logic Analyst

Jupiter, FL
1 year Contract
Pay Rate: $60.00-70.00/Hr

1st Shift

Duties:
Engine Control Logic Analyst to support Hypersonics program.



** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage, Sterling or Talentwise. See attachment for specific background check onboarding requirements **



Keywords:

-Hypersonics

-Control Systems

-Requirements

-Programming

-Embedded Software

-Logic

Skills:
Required:

Familiarity with industry standards for engine control software design (P&W SEPG-0-000, NASA NPR 7150.2A, ISO 12207, DO-178C or other industry standard).
Good technical writing skills.
Project/schedule management skills.
Requirements generation skills.
Ability to translate engine operation requirements into engine control logic flow diagrams.
Proficiency with MS Office: Word, EXCEL and Powerpoint.
Desired:

Experience/proficiency with the following tools and computing platforms is desired: Windows, Alpha/VMS, C Programming, Pictures-to-Code, Matlab/Simulink, Unigraph.
Experience with linear model generation and control loop gain sizing and stability analysis.
Familiarity with Aerojet Rocketdyne procedures (AR ENG-P-4.03.04)


Education:
B.S. or M.S. in Mechanical or Aerospace Engineering
 
Job Number: 7883
Job Location: Jupiter, FL
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/12/2017
Last Updated: 11/27/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Engineer Structural- 5- Secret Clearance

Description:
PDS Tech is seeking a candidate for the Engineer Structural 5 position located in Melbourne, FL.  

Perform static, dynamic, and DaDT structural analyses of metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
Ensure that 
designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
The analyst may also be expected to derive non-flight applied loads, create, extract and 
distribute internal loads, and perform weight and stiffness optimization. T
ools utilized may include FEMAP, NX,Teamcenter 
and other software applications.

Basic Qualifications:



Bachelor of Science degree (ME/AE/CE) with 14 years of experience in AEROSPACE Structural Analysis.




Preferred Qualifications:



Knowledge of FEMAP and NX CAE. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions. Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

 


 
Job Number: 1710075260
Job Location: Melbourne, FL
Duration: 5 months
Input Date: 10/11/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023L3MAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer, Analysis / Systems Engineering (Aero Thermal Fluids) Level III CA

Description:
Job Title: Engineer, Analysis / Systems Engineering (Aero Thermal Fluids) Level III

Number of Positions: 4

Remaining Positions: 4

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Analysis and Design of aerospace propulsion systems at the component and system levels, specifically addressing liquid rocket engines.

-Work will require use of heat transfer analysis tools, along with related fluid dynamic and combustion tools.

-Work with ATF Lead engineers and other senior engineers in a team setting to accomplish defined goals.

-Conduct thermal and fluid analyses related to the design, test and verification of liquid rocket engines.

-Specific job assignments may entail analytic modeling, defining thermal and fluid boundary conditions and conducting computer simulations to assess the thermal response and performance of engine hardware.

-Additional responsibilities may include pre- and post-test analysis including data analysis of test results.

-Further requirements include documentation of Program and ATF Discipline results.

Skills:
Required:

-Relevant college coursework in thermodynamics, heat transfer, and fluid dynamics.

-2 to 4 years of related professional experience.



Desired:

-M.S. degree in Mechanical or Aerospace engineering.

-Advanced college coursework in thermodynamics, heat transfer, and fluid dynamics.

-Propulsion analysis experience in liquid rocket engine or gas turbine engines.



Keywords:

Heat transfer, fluid dynamics, analysis, modeling, simulation

Education:
B.S. degree in Mechanical or Aerospace engineering

Skills:
Required

HEAT TRANSFER FLUID DYNAMICS SIMULATION THERMAL ANALYSIS

State/Province: California
City/Town: Canoga Park

Start Date: 10/30/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7359407
Job Location: Canoga Park, CA
Rate: 46/hr max
Duration: 12 month contract
Input Date: 10/20/2017
Last Updated: 12/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FMEA Engineer for Electrical Equipment Racks

Description:
FMEA Engineer

My client is looking for an FMEA Engineer to do FMEA on electrical equipment racks for an aerospace application. This is a 3-6 month contract position. There may be two positions. The location is Centennial, CO.

Here is the job description:

FMEA Engineer

• Perform FMEA on electrical equipment racks for a major aerospace customer. The ideal candidate will have both electrical and mechanical experience.

• Aerospace or Defense experience is a must.

• This project will start in by December 1, maybe sooner.


The location is Centennial, CO.

The rate is open. The duration is 3-6 months.

US citizens and those authorized to work in the US are encouraged to apply. We are unable to sponsor H1b candidates at this time. You must pass a background check and drug screen.

If you are interested in this position, please send me your current resume, desired rate, and the best time and way to reach you.


If you are not interested, please feel free to send this to anyone you feel would be qualified as I pay for referrals whether you work for me or not. Thanks for your help!

Thank you!
 
Job Number: mm171108cjFMEA
Job Location: Centennial, CO
Per Diem: Possible
Duration: 3-6 months
Start Date: ASAP
Input Date: 11/08/2017
Firm Name: PRODUCTIVE DATA SOLUTIONS INC
Attention: Michael Mendocha
Address: 6870 W 52ND AVE STE 107
City, State: ARVADA, CO 80002
Phone: 303/220-7165
Fax Phone: 303/220-7425
Website: www.pdsinc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Description:
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Location: Orlando, FL
Duration: 1 year contract
Pay Rate: $65/hr - $75/hr (DOE)
Shift: 1st, 9/80
**Must have an Active Secret Clearance**


Job Description:
-Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
-Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
-Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
-Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
-Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
-Requires good verbal and written communication skills, and ability to work in a team environment.
-Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
-Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


Mandatory Skills:
-Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


Desired Skills:
-Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
-PRO E and/or CATIA skills
 
Job Number: 7019
Job Location: Orlando, FL
Rate: 65.00-75.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 01/31/2017
Last Updated: 12/20/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer

Description:
Flight Controls Engineer
Duration: 12+ months
Pay Rate: $85/hr

Senior Flight Control Engineer Responsibilities:
Develop Flight Control Laws and control algorithms to meet vehicle performance, flying qualities, and stability margins on ground and in flight.
Support definition of Flight Control System specifications and requirements and Flight Control Law requirements for handling qualities, sensors, actuators, and controllers.
Design, develop, and test autopilot and associated logic functions.
Develop modeling and simulation of dynamic systems
Develop six-degree-of-freedom (6DoF) digital simulation models and computer code.
Conduct engineering analysis, studies, and performance assessments.
Integrate models into software and hardware-in-the-loop simulation environments. * Verify and validate Flight Control Systems through testing in desktop simulation environment, systems integration labs, aircraft flight test, and aircraft/system qualification and certification activities.
Perform hardware / software integration and testing on flight simulator devices, including pilot in the loop testing.
Support analysis of system architecture, redundancy management, electronic hardware design and integration, and actuator design and integration.
Support development of Operational Flight Program software.
Work closely with engineers of varying disciplines and aircraft Subject Matter Experts to meet flight simulator regulatory and customer training requirements
Participate in engineering design reviews.
Keep current on future technologies and products
Analyze air vehicle flight test data and support flight test activities
Senior Flight Control Engineer Desired :
8 years or more experience in flight control law development for aerospace vehicles.
Knowledge of aircraft and aerospace systems with emphasis on flight dynamics, propulsion and ground reaction forces.
Knowledge of reversible and irreversible flight control systems.
Knowledge of MIL-HDBK-1797, MIL-F-8785C; MIL-F-9490D; DO-178B
Simulation Experience
Experience with planning and conducting flight tests, and post test data evaluation.
Excellent verbal and written communication skills
Excellent Organizational Skills and problem-solving skills
Strong team player
Excellent computer skills, including word, excel and powerpoint
Proficiency with Simulink, C/C++, Linux / Unix, MATLAB, Fortran
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA is highly desired
Senior Flight Control Engineer Education/Certifications Required:
BS or MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering (or related field).
ITAR Requirements:
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company, LLC is an AA/EOE
 
Job Location: Mojave, CA
Rate: $75-85/hr
Per Diem: yes
Overtime: yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/08/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience either conducting, functioning as an on board flight analyst, or telemetry during experimental fixed wing aircraft flight testing in any of the following fields: Avionics, Powerplant/Mechanical Systems, Performance/Stability & Control. Experience documenting test procedures consisting of step by step instructions which includes success criteria for determining pass or fail of test points in a released test plan. Experience reviewing results of flight test data to understand results and make decisions on whether test points pass or fail.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects.
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Education/Experience
Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 24-156
Job Location: Savannah, GA
Rate: $56-$67/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 11/14/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineers

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM�s. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
This position will be in the Test and Evaluation Support unit, which has four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.

The Instrumentation Engineer is responsible for supporting the operational and technical success of the instrumentation group. This person works closely with all other Instrumentation Engineers, Technicians, other T&E Support Staff to meet instrumentation requirements.

Job Duties and Responsibilities (Essential Functions):

� Provide instrumentation services: to include:
o production of instrumentation specifications, sensor selection, wire diagrams, installation diagrams (FTEO packages), sensor and system calibration, signal conditioning, derived parameters, cockpit displays, data validation, data tracking, data recording, documentation and conformity.
o Ensuring that the instrumentation systems and deliverables meet quality standards as well as all customer specifications to include accuracy, resolution, and frequency range, and function correctly within harsh operating conditions typical of aircraft.
o Provide instrumentation equipment management to ensure that equipment is maintained, calibrated and available for re-use to minimize waste.
� Provide instrumentation technical input: advise the organization in regards to technical information for the best technical selection of sensors and support equipment at affordable costs. Works closely with Product Development Unit when new equipment and systems are required or for the design of Flight Test safety equipment, or any complex mechanical installations that require stress approval.
� Support Program Teams: Works with OEM & STC program and project managers with technical resources requirements. Fully supports the test planners in regards to their instrumentation needs.


Knowledge/Skills/Abilities:
� Intermediate knowledge skills and competency of Flight Test Instrumentation (FTI) and data equipment for the purpose of recording and monitoring parameters fitted to experimental aircraft including associated of industry processes and practices to include:
o Electrical and avionics design,
o Data Systems Design Principles
o Telemetry
o Air data booms (straight nose and swivel-head)
o Static trailing cones
o Sensitive aircraft instruments
o Cockpit displays
o End-user interface
o Portable test equipment such as hand-held stick force gauges
o High-end GPS receivers and antennas for precise aircraft positioning
o Position transducers - sting potentiometers, rotary potentiometers, LVDTs, RVDTs
o Pressure transducers
o Flowmeters
o Temperature sensors - thermocouple wire/probes/assemblies, RTD probes, thermistors, glass bulb thermometers
o Strain gauges, load cells, force transducers, torque sensors
o Portable weather stations - wind speed/direction, outside air temperature, relative humidity
o Video recording equipment
o Signal conditioners
o Data acquisition systems and data loggers
� Intermediate knowledge of flight test operations and flight certification.

Level Requirements (Minimum):
Education
� Formal Instrumentation Training (Military or Civilian) � Preferred
� BS in Engineering or equivalent experience

Experience
� 5+ years relevant technical experience
� Intermediate understanding of flight and ground test planning and test conduct, and test data analysis.
 
Job Number: #301-Flight Test Instrumentation
Job Location: Moses Lake, WA - Washington
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 2-3 years or direct
Start Date: ASAP
Input Date: 12/28/2017
Last Updated: 01/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Flight Test Mechanical Design Engineer
Savannah, GA
Rate: $75-$80

Unique Skills:

Flight Test Mechanical Design Experience Required Smarteam Experience Required 15,000 Hours CATIA V5 Required Company Experience Preferred Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. Position Purpose: Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services Principle Duties and Responsibilities: Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned. Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7978
Job Location: Savannah, GA
Rate: $75-$80
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Mechanical Design Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Flight Test Mechanical Design Experience
• Required SmarTeam Experience
• Required 15,000 hours Catia V5

Experience/Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• See Other Requirements in Job Description.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-203
Job Location: Savannah, GA
Rate: $75.00 to $ $80.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 12/04/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Technician

Description:
1st and 2nd shift available

Job Description
Structural lab technician capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.
• Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
• Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
• Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
• Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
• Must be able to work from elevated work platforms at various heights.
• Must be willing and able to work in inclement weather.
• Must be capable and comfortable working within a diverse team environment.
• Must possess skills and aptitude to operate test facilities and data acquisition systems..
 
Job Number: CT39325
Job Location: Stratford, CT
Rate: $37.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 10/31/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of complex mechanical systems, testing of components such as, heat exchangers, pumps, fans, & accumulators. Applicant must have the capability of working independently and be self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.

Education: Bachelor's Degree
 
Job Number: 39714
Job Location: Windsor Locks, CT
Duration: 12 months
Start Date: ASAP
Input Date: 11/08/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Technician/Engineer

Description:
1st and 2nd shift available

Job Description
• Work from Engineering Requests, Procedures and Drawings with limited guidance; to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.
• Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.
• Assist in performing System and sensor calibrations.
• Working environment consist of the Structural Test Lab, Remote Test Stands ( Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation .
• Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.
• Must possess a strong Mechanical and Electrical background and familiarity with Strain Gages and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.
• Ability to perform strain gage installations preferred.
• Must be able to work from elevated work platforms at various heights.
• Must be willing and able to work in inclement weather.
• Must be capable and comfortable working within a diverse team environment.
 
Job Number: CT39322
Job Location: Stratford, CT
Rate: $40.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 10/31/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laser Tracker Operator

Description:
Must be US citizen in order to comply with ITAR regulations on this project

Unique Skills:
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred.
• Experience with Catia V5 software preferred.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.
 
Job Number: 24-211
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/16/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer I / II / III / IV - (MO)

Description:
SEVERAL OPENINGS IN THE ST. LOUIS, MO AREA

Active Secret Clearance NOT REQUIRED to start.

Responsibilities:
1. Candidates will provide support to St. Louis production programs and development projects in the areas of robotics/automation, production equipment, mechatronics, process development, and mechanical drilling/fastening/inspection/assembly technologies.
2. Candidates will support operations across composite fabrication, paint operations, and assembly operations in support of multiple aircraft and weapons programs.
3. Candidate has considerable latitude in determine technical objectives of assignments and will represent the organization as a prime technical contact on manufacturing technologies and MR&D projects.
4. Candidate will interact with senior external personnel on difficult technical matters and represent the organization to internal senior management levels.
5. Candidate will provide technical solutions to a wide variety of complex problems that require ingenuity and creativity.

Typical responsibilities will include:
1. Apply knowledge of engineering and scientific principles to aircraft design efforts, production operations improvements, develop and implement wide range of technologies, and reduce costs of aircraft assemblies.
2. Review engineering documents, drawings, and support design reviews to ensure proper selection and specification of equipment and processes for part fabrication, paint, and assembly operations.
3. Evaluation of new technologies for potential application to business needs. Performing TRL & MRL assessment on technologies proposed and/or procured for production.
4. Work directly with engineering, manufacturing and suppliers to perform manufacturing process improvements and implement robotics, automation, and manufacturing technologies to achieve cost reductions.
5. Coordinate with supplier management for purchase of production equipment
6. Create and manage project schedules and coordinate technology integration activities with program support teams.
7. Help resolve programmatic and technical problems that would affect cost, schedule, and performance.
8. Support root cause and corrective action reviews by conducting engineering investigations for fabrication and/or assembly issues.

Additional Information:

Successful candidates will have strong communication skills and be a highly motivated self-starter who can apply engineering skills to current production support requirements and MR&D projects. Interaction with customers (internal and external) and suppliers to coordinate and resolve production technical issues on a frequent basis.

Participate as a team member in Integrated Product Team projects. Work under general supervision of more senior technical engineers. Occasional travel to vendor facilities, technical conferences, or technical exchange meetings is required.

Bachelor's degree, or Master's Degree, or PhD.
 
Job Number: MP&PMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer 2 – Production and Fabrication

Location: Redmond, WA
Rate: $30.00 - $38.50/HR
Duration: 5 month contract

**MUST be a U.S. Citizen**

Duties:
The Production Manufacturing Engineer will be responsible for working directly with a program assigned manufacturing engineer in an integrated program team (design, quality, contracts and program), to ensure all engineering/manufacturing requirements are met within manufacturing documentation. This will require working directly with assembly/test technicians to implement processes, and look for ways to continually improve them. Create work instructions, bills of materials, routings.

Skills:
Required: Microsoft Office Suite, creation of work instructions, creation of bills of materials

Desired: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
- Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 5+ years experience and/or 7+ years applicable experience
 
Job Number: 8191
Job Location: Redmond, WA
Rate: $35.00 - $38.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/06/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer
Manufacturing Engineer experienced with Catia V5, SAP, and Solumina preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.



Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
 
Job Location: Savanah, GA
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/09/2017
Last Updated: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 03/05/2018
Last Updated: 03/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 08/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I
Savannah, GA
Rate: $30-$35

Unique Skills:

Must be a U.S. Citizen


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 8166
Job Location: Savannah, GA
Rate: $30-$35
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I

Location: Savannah, GA
Rate: $35-40/HR
Duration: Long Term Contract



Unique Skills:
Experience in SAP/Solumina preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
Languages Required (in addition to English): None
 
Job Number: 8040
Job Location: Savannah, GA
Rate: $35-40/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Catia / SAP / SOLUMINA / SmarTeam

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months (18) Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). 2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 4. Author DRDI/DMT rework instructions to support effective corrective actions. 5. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 6. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 7. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 8. Investigate and assist in preparing justification for equipment and facility requests. 9. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. 10. Participate in Design for Manufacturing assessments with Engineering. 11. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 12. Perform audit of co-workers output based on defined requirements and procedures. 13. Must demonstrate knowledge of ME policies and procedures. 14. Incorporate Lean Manufacturing Methodology into existing and future processes. 15. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives. 18. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7886
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
SAP - SOLUMINA - CATIA REQUIRED


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7774
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 10/26/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Requires experience in aviation manufacturing. Requires experience in Solumina, Catia, Microsoft Office, and ERP software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8135
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/05/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7511
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 06/08/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Required: SAP - Catia - Solumina

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7515
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 09/20/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr.

Description:
Location: Redmond, WA
Rate: $40.00 - $47.50/HR
Duration: 5 month contract

**MUST be a U.S. Citizen**

Duties:
In this role, you will lead manufacturing activities and work with a cross-functional team of engineers, as well as program management, assembly technicians, and test personnel to ensure quality manufacture of mechanical hardware. Responsibilities include manufacturing process development/maintenance, supplier support, work instruction creation, tool design, personnel training, process ownership, and management of hardware flow through production including budget and schedule. Create work instructions, bills of materials, routings.


Skills:
Microsoft Office Suite, creation of work instructions, creation of bills of materials

Desired Skills: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 10+ years experience and/or 15+ years applicable experience
 
Job Number: 8192
Job Location: Redmond, WA
Rate: $40.00 - $47.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/28/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanic

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610060095
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/25/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002FtZOAA0&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
TWO - 1ST Shift KCR Remanufacturing Techs - Kansas City MO
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment

 

For consideration to this position, please contact Earl Sawyer at esawyer@pdstech.com or 843-277-6616.


 
Job Number: 1710067688
Job Location: KS City, MO
Duration: 12 months
Input Date: 05/03/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000012YKOAA2&URLSource=cjhunter

Mechanic Technician II

Description:
PDS Tech is seeking several mechanics for positions in Kansas City.
Must have steel toed shoes/boots; all assignments are one year in length
3rd Shift Position
 
 
 
Work may involve used mechanical parts. Aprons & Coveralls are available to contractors; must have steel toed shoes
  
 Operation of Overhead Cranes is involved in this job
Essential Functions / Responsibilities:*Perform disassembly, clean, requalification, rework and assembly operations on Traction Motor Combo component utilizing manual equipment and automated equipment in accordance with manufacturing and quality procedures. Inspect work completed on components to internal inspection criteria for compliance to quality or engineering requirements. Responsible to perform work in a safe manor in support of lean manufacturing principals such as but not limited to 5s or single piece flow to required takt time. In some cases may have to perform special process such as welding or non-destructive testing which will require special process training or certification. Operation of overhead cranes
Basic Qualifications / Requirements:*• Must have high school diploma or GED at a minimum
Knowledge of EHS procedures and policies
• Knowledge of safe use manual equipment and hand tools for assigned product lines.
• Working knowledge of use of inspection measurement equipment
• Understanding of all manufacturing and quality procedures associating assigned product line in a lean manufacturing environment
• Maintain acceptable defect rates
• Successful completion of training requirements
• Where applicable, trained in special processes such as but not limited to welding or non-destructive testing
Desired Qualifications:*• Demonstrate ability to safely complete job tasks utilizing manual or automated equipment as well as use of gages needed for inspection or testing as required
• Demonstrate ability to document and record inspection results per in-house procedures
• Successful completion of quality audit to internal procedures on assigned product line and/or use of equipment



For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 

 
Job Number: 1610059718
Job Location: KS City, MO
Duration: 12 months
Input Date: 11/07/2016
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002Fr1dAAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Denver/Centennial, CO
Pay Rate: DOE, exempt OT
Duration: 1 year W2 contract
**MUST be a U.S. CITIZEN**

Description:
• Bachelor's degree or higher
• Mechanical Design Engineer to support production tooling design
• 10+ years experience
• Proficient in CAD modeling and drawing creation – NX version 10
• Develops system, mechanism and component model designs and drawings
• Proficient with structural designs and mechanisms
• Capability to perform system integration and system level trade studies to optimize designs for manufacturing, production and performance
• Knowledge of machine shop practices, capabilities and limitations
• Knowledge of assembly and material handling
• Familiar with welding processes
• Knowledge of TeamCenter is a plus
 
Job Number: 7997
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Decatur, AL
Pay Rate: DOE
Duration: 1 year W2 contract
**MUST be a U.S. CITIZEN**

Description:
• Bachelor's degree or higher
• Mechanical Design Engineer to support production tooling design
• 10+ years experience
• Proficient in CAD modeling and drawing creation – NX version 10
• Develops system, mechanism and component model designs and drawings
• Proficient with structural designs and mechanisms
• Capability to perform system integration and system level trade studies to optimize designs for manufacturing, production and performance
• Knowledge of machine shop practices, capabilities and limitations
• Knowledge of assembly and material handling
• Familiar with welding processes
• Knowledge of TeamCenter is a plus
 
Job Number: 7973
Job Location: Decatur, AL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Dallas, TX / Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift


**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last two (2) years**


Job Description:
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- The candidate will work and support the lead design engineer to conduct integration activities, impact to the system, required sub-system/component modifications, and impacts to system performance studies.
- Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
- Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with missile to aircraft integration concepts, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably (but not required) within the last 5 years.
- Clearance status on resume required.


Skill/Experience/Education
Mandatory: (MUST BE SHOWN ON RESUME)
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 7915
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the selected program.
- Verify tolerance analysis on system components has been performed.
- Work with Designer's to ensure the design meets all requirements including Safety of Flight (SOF).
- Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
- Work closely with Mechanical Engineering to support all program objectives.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last 2 years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- Experience with all aspects of mechanical design, including layout, documentation and checking (per IAW ASME Y14.24) and be familiar with MIL-T-3100 and MIL-STD-100.
- Five (5) to ten (10) years experience of creating Pro-E / CATIA drawing and drawing release.
- Proficiency with Pro-E / Windchill is required.
- Knowledge of LMC drawing release procedures is desired.
- Good knowledge of all aspects of Mechanical engineering is essential.
- Previous LMC experience is a plus.
 
Job Number: 7845
Job Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/28/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineers - Bridgewater, VA

Description:
Now Hiring Mechanical Design Engineers!

Overview:

STS AeroStaff Services is now offering Mechanical Design Engineer jobs in Bridgewater, Virginia. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Bridgewater, Virginia; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a Mechanical Design Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Qualifications:

• Aircraft Structural Designers with Autodesk Inventor experience required
• Solidworks experience preferred
• Experience with King Air, Dash 8, Beech 1900s is strongly preferred

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40539
Job Location: Bridgewater, VA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/03/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Modeler/Drafter

Description:
Mechanical Design Modeler/Drafter

Location: Denver, CO
Rate: DOE
Duration: 1 year contract

Work Description:
- 5+ years’ experience
- Must be fluent with mechanical design utilizing CREO
- Strong at generate engineering drawings
- Proficient at modeling structural and mechanical system
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Experience with GD&T a plus
- Familiar with welding process a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8169
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/02/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer III – Ground Support Equipment
SUMMARY:
this Mid-level Mechanical Engineer will work in a team environment on all aspects of definition and development of Mechanical Ground Support Equipment (MGSE) for build, test and recurring operations of the Dream Chaser space vehicle. The candidate will work with the flight hardware design to define MGSE needs, act as the Point of Contact (POC) for specific MGSE, and provide direction and support to other team members with POC responsibility. Candidate will oversee suppliers for design, fabrication, and test, assisting the Ground Support Equipment (GSE) Lead to manage cost, schedule, and risk, for all Dream Chaser related MGSE, ensuring that it meets the program requirements.

PRIMARY RESPONSIBILITIES INCLUDE:
• • Read and interpret blueprints, technical drawings and schematics
• Originate specifications, control documents, verification and validation plans, procedures, reports, or other documentation in support of design and development activities
• Work with other Engineers to implement operating procedures, resolve system issues and provide technical information
• Prepare material for, and conduct, periodic design reviews
• Ensure conformance of products with Engineering design and performance specifications
• Execute engineering design and development activities consistent with Customer quality, cost, and schedule requirements
• Conduct research that test and analyze the feasibility, design, operation and performance of equipment, components and systems
• Estimate costs and submit bids for Engineering
• Initiate problem solving for new product designs and as well as existing products
• Select, initiate the procure process, install, checkout, and acceptance test hardware
• Support development of test plans and procedures, conduct of end item verification and validation
• Participate in design integration with requirements and industry standards

ADDITIONAL RESPONSIBILITIES INCLUDE:
• Punctuality to work each day and prepared to work scheduled work hours
• Planning and execution of system field deployment, and sustained O&M field activities
• Ability to provide solutions to a wide range of technical problems
• Other duties as assigned

EDUCATION:
• Bachelor’s degree in Mechanical engineering or related field with 6+ years of professional experience
REQUIRED SKILLS:
• Experience developing Concept of Operations and developing Architecture/Design for ground support equipment
• Experience with mechanical design processes (preliminary and final design and with the design review process.)
• Experience with Engineering life cycle processes and procedures
• CAD experience in one or more of the following: SolidWorks 2014,NX 8.5, Creo 3.0
• Experience placing new equipment into service including development of validation and operation procedures
• Proficiency with PC based MS Office products such as Word, Visio and Excel
• Possess good oral and written communication skills
• Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams
• Previous experience and skills in project definition, simulation, implementation, lab integration and test
• Familiar with System analysis (FEA, thermal, Acoustic, Center of Gravity and Environmental lighting, EMI/EMC)
• Familiar with Safety Hazard Analysis mitigation and Functional Failure Modes and Effects Analysis

DESIRED SKILLS:
• Experience in Hardware document control (WindChill)
• Experience with Non-conformance dispositioning
• Experience developing test plans and procedures
• Experience with technical management of suppliers (SOW and specification development)
• Experience with creating, managing and updating Bill of Materials
• Knowledge of component level environmental testing, Environmental test experience – Vibration, Shock Tests, Thermal, Humidity, Motion, dust and Water Protection, etc.
• Familiar working with rugged equipment
• Familiar with Manufacturing / product development processes (Work Orders, Quality Inspections, and Material Control etc.)
 
Job Location: CO
Input Date: 11/08/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
From the Hiring Manager:

*** Looking for a Mechanical Engineer who has prior hands-on mechanical design experience along with the working knowledge / understanding of the assembly / fabrication process
*** This position is an open-ended position (12+ months to perm) working on multiple contracts extended over the next 3 years (36 months).
*** SolidWorks is a must; should have Production / Manufacturing experience working for government customers (Defense, Military, etc) and not someone with all Aerospace experience
*** Although this position is labeled as a “contract position”, he’s looking for someone who wants to further their career and grow with an established industry leading company. You will be hired to work on several projects / prime contracts, which gives this position stability & job security for the next 3+ years.

Summary:

The Mechanical Engineer will assist in the creation of proposals for technical solutions to government customer solicitations by researching, brainstorming and developing new mechanical design solutions. The projects will require solutions that ensure functionality, quality, reliability, cost and manufacturing capability for a range of specifications. The Mechanical Engineer will create and maintain the project specifications and develop the design and other aspects of the project plan including schedule, resources and costs.

Responsibilities:

> Design and analyses of technical development projects, mechanical systems with multiple moving parts
> Defining project specs and project plans
> Working with manufacturing processes/systems and the ability to translate this knowledge into design direction for new designs and existing product improvements
> Independently create structural analyses of machinery and small scale architectural assemblies
> Work with structural analysis tools, both manual calculations and automated software approaches (FEAs)
> Work with weldments and/or welded structures
> Exhibit fluency in parts/assemblies
> Exhibit an understanding of, and experience with, MIL-STD-810 environmental requirements and resulting design issues
> Product validation and durability testing
> Initiate and lead cross functional team meetings and design reviews to complete mechanical design (concept through launch)
> Apply DFM/DFA principles to the mechanical design and creating multiple concepts, thoroughly evaluating each, and presenting them for design reviews by peers.

Requirements:

> Bachelors/Masters in Mechanical Engineering & 5–10+ years in mechanical project engineering experience
> Proficient in Solid Works, and ASME Y14.100
> Experience with R & D for government customers preferred

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 041_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 10/04/2017
Last Updated: 12/05/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Mechanical Engineer

Description:

PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

 
  • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
  • Participates in establishing operating procedures on new products and components
  • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
  • Evaluates opportunities for defect prevention based on standard or accepted solutions
  • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
  • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
  • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
  • Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
  • Provides technical assistance in appropriate assigned field
  • Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
  • May perform other duties as required
  • Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum three (3) years of professional technical experience.
  • Proficiency in Microsoft Excel, Word and PowerPoint required

Additional Qualifications: 

  • Hands-on experience with 3D design software like Creo or SolidWorks
  • Effective verbal, written and presentation skills
  • Knowledge of continuous improvement methodologies including Six Sigma
  • Previous experience in a manufacturing environment
  • Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
  • Proven ability in decision making and organization, planning and problem solving skills
  • Ability to work under minimal supervision, with latitude for independent action and decision making.
  • Good people skills, ability to motivate teams to produce on-target and timely results.
  • Demonstrate project/program management via multiple priorities/projects
  • Ability to plan and organize, demonstrate excellent time management and support several projects at once
  • Willingness to travel on occasion

 
Job Number: 1710068729
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/26/2017
Last Updated: 09/21/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JrH0AAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Selected candidate will perform all Liaison duties for the program.
- Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. - Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- CAD expertise per job description (Windchill, CREO and Catia).
- Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.
 
Job Number: 7844
Job Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/05/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Engineer - Level 3 - FL - C

Description:
Chipton-Ross is seeking a Mechanical Engineer - Level 3 for an opening in Fort Walton Beach, FL.

RESPONSIBILITIES:
The position will require the individual to hold a major contributing role within the overall Engineering organization; as such they will be expected to prepare and present materials for peer reviews, design reviews, DFM discussion, and group discussions on technical aspects of the design. The Engineer will be expected to lead the design effort for system sub-assemblies or potentially for small self-contained systems. The designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. The individual will be expected to work cross functionally within the Engineering organization as well as across the company.
Ongoing job responsibilities include:
o Designs components and assemblies using commodities including sheet metal & machined components
o Provides technical experience for design and manufacturing related matters
o Mechanical design and associated program deliverables on subassemblies or small self-contained systems
o Design and release drawings to meet internal and external commitments.
o Updates on project progress and roadblocks.
o Provide input to System Engineer for design specifications for components, assembled parts and equipment for design validation.
o Demonstrate manufacturing feasibility and technical justification for selected design approach
o Support product lifecycle management ushering a product from concept through production implementation.

REQUIRED EXPERIENCE:
-CATIA V5
-MS Office Suite expertize

PREFERRED EXPERIENCE:
-TeamCenter Engineering experience
-C130 Familiarity
-JobScope /IT reports experience

EDUCATION:
Bachelor's Degree

WORK HOURS:
5/40, 1st Shift, Full-Time


MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 164393
Job Location: Fort Walton Beach, FL
Rate: $35 to $45.00 DOE
Duration: 12 Months
Input Date: 07/24/2017
Last Updated: 09/23/2018
Firm Name: CHIPTON ROSS
Attention: Christophor Long
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: clong@chiptonross.com
Website: www.chiptonross.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
With sustaining experience
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers BSME -- Pro/E

Description:
2000 hours Pro/E
 
Job Location: CT/IN/FL/OR
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Ground Support Equipment Designer

Description:
Mechanical Ground Support Equipment Designer

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: First, exempt OT
**MUST be a U.S. CITIZEN**

Work Description:
- Bachelor's degree or higher required
- 5-10+ years’ experience required
--- Must be fluent with mechanical design utilizing CREO, required
--- Strong at generate engineering drawings, required
--- Proficient with structural design and mechanisms, required
--- Must be familiar with basic fluid system components such as hoses, tubing, pipe routing and fluid system hardware, required
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Familiar with welding process
- Experience with GD&T a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8167
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/14/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 1 // Berkeley, MO

Description:
Mechanical System Design & Analysis Engineer 1

Location: Berkeley, MO
Duration: 12 months

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs limited detail design development and modification of mechanical and fluid system installations. Supports team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under close supervision. UG NX experience required. Experience or background with Environmental Control Systems / Oxygen systems a plus

Education / Experience:
Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

Skill Code:
63B-Mechanical System Design

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 17-18530
Job Location: Berkeley,, MO
Input Date: 11/01/2017
Last Updated: 11/09/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer I (Unigraphics) - (MO)

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs limited detail design development and modification of mechanical and fluid system installations. Supports team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under close supervision. Unigraphics experience expected. Initial role will be primarily Installations work, but role will expand with experience.

Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.
 
Job Number: MechIMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/27/2017
Last Updated: 11/03/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design and Analysis Engineer

Description:
Mechanical System Design & Analysis Engineer

Location: Berkeley, MO
Duration: 12 Months

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment. Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers. Performs limited detail design development and modification of mechanical and fluid system installations. Supports team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems. Assists in preparing technical documents for mechanical components and systems. Assists in supporting proposal preparation and new business development efforts. Works under close supervision. UG experience required

Education / Experience:
Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

Skill Code: 691-Fuel Systems Design
 
Job Number: 17-18623
Job Location: Berkeley, MI
Per Diem: Yes
Input Date: 11/01/2017
Last Updated: 11/09/2017
Firm Name: ICONMA LLC
Attention: Robin
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer

Description:
UG/NX experience REQUIRED

Job Description:

Supports the development and documentation of mechanical and fluid system and thermal environment.
Supports the development, maintenance or modification of system designs/proposals to provide design documentation and high-level requirements to downstream users/customers.
Performs limited detail design development and modification of mechanical and fluid system installations.
Supports team in performing spatial integration at system or component level and modification of mechanisms/landing gear/ordinance systems.
Assists in preparing technical documents for mechanical components and systems.
Assists in supporting proposal preparation and new business development efforts.
Works under close supervision.
Education / Experience:Required: Bachelor's degree in an engineering classification from an accredited course of study, in engineering, computer science, mathematics, physics, or chemistry.

This position requires the ability to pass a background check and drug screening prior to employment.

In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
 
Job Number: Ph.# (636) 438-0314; 39570
Job Location: St. Louis, MO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 10/30/2017
Last Updated: 11/01/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michelle Fox
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer II - CA

Description:
Basic Qualifications:
• Bachelors’ degree in Mechanical Engineering, Physics, Material Science or related field + 2 years relevant experience
• Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
o Use of block part libraries
o Generation of multilayer drawing packages, detailed assembly views, and schematics
• Demonstrated working knowledge of basic GD&T principles
• Sound working knowledge of Finite Element Analysis techniques and basic thermal analysis, preferably using Inventor Pro Suite Analysis package (including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
• Background in tooling design a plus


Essential Job Functions:
Design solar panels and solar panel components in AutoCAD / Inventor Pro Suite. Also design and update searchlight and advanced illumination assemblies in AutoCAD / Inventor Pro Suite as required.
Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others. Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
Work with Illuminations Engineers to generate and update part and assembly documentation needed for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and model management in VAULT.
Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective. Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT principles to all generated and reviewed designs.
Provide support to tooling design team on an as needed basis.
Use Finite Element Analysis to support new design development and Root Cause investigations.

Knowledge Desired:
Candidate must be proficient and efficient in use of AutoCAD / Inventor Pro Suite 11 (or higher) in both 2D and 3D and have a sound working knowledge of basic GD&T principles.

Candidate must also have prior knowledge and experience in generating and running finite element analysis, preferably using Analysis package in AutoCAD / Inventor Pro Suite.

Ability to compile and present data using excel and powerpoint, and to generate/update procedural documentation using MS Word, a strong foundation in mechanical engineering and/or material science, as well as familiarity with basic physics of solar cells, Aerospace materials, and assembly techniques, PCBs and electronics are all considered as pluses.
Essential Physical/Mental Requirements:
Candidate must be highly adaptable to meet changing priorities in support of manufacturing, engineering, and marketing needs. Must have good people skills and be able to communicate effectively with a diverse group of both internal and external customers and colleagues.
Must be willing to embrace change and learn new skill sets as needed in order optimize processes and procedures and address balancing workloads in a dynamic market environment.
Special Requirements:
The ideal candidate should be flexible, able to support evening and weekend work on an as needed basis, and self-motivated. Must be adept at working in a fast paced environment to complete scheduled milestones as planned.

Bachelors degree in Mechanical Engineering, Material Science, Physics, or related field + 2 years relevant experience (or equivalent certification) in Computer Aided Design.

Experience Desired:
Must be proficient in:
• reading/generating electrical schematics
• quickly generating 2 and 3 D models using block part libraries
• use of multi-layer drawing structure
• generating assembly detail views

The ideal candidate must also have a demonstrated working knowledge of basic GD&T principles for evaluating manufacturing tolerances and dimensional stack-ups, and have prior experience in generating/running finite element analysis models. Prior experience in use of Autodesk VAULT is highly desired.

Experience in packaging design and/or wiring assembly is also desirable.
 
Job Number: MechEngIICA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 11/03/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer III - MO

Description:
SEVERAL OPENINGS IN THE ST. LOUIS, MO AREA

Active Secret Clearance, NOT REQUIRED to start.

Perform independently Air Vehicle Systems engineering tasks to sustain the fielded tactical weapons systems.
Design and apply engineering principles to mechanical systems and/or propulsion engineering.
Conduct retrofit/redesigns, system integration, and system troubleshooting for multiple hardware / software subsystems.
Perform product investigations on the fielded subsystems, completing failure/trend analysis on system hardware / software, and supporting qualification / fielding of product redesigns.
Interface directly with supplier and customer to communicate results of analysis and support issue resolution.
Work under general guidance of senior engineering and management to develop recommendations on improvements to the fielded systems / subsystems.
Work cross-functionally on a wide variety of technical issues.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

CATIA V5, Enovia
 
Job Number: MechEngMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/15/2017
Last Updated: 12/18/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineers (multiple openings)

Description:
Mechanical Systems Design (multiple openings)
Location: North Carolina
Duration: long term contract, 12+ months
Rate: Open, DOE
Overtime
Mechanical Systems Design Engineer Summary
Perform preliminary and detail design of aircraft mechanical systems, including flight controls, hydraulic systems and ECS systems.
Create 3D/2D definition.
CATIA V5 is a plus.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Can possess background in aircraft structural design as well.
Mechanical Systems Education, Work Experience, Certification and/or Licensure :
1. Bachelor’s degree in engineering or equivalent years of work experience in lieu of formal education.
2. Structural analysis certification to Part 23 or 25 standards.
Mechanical Systems Design Knowledge, Skills and Abilities:
1. Strong oral an written communication skills.
2. Ability to multitask.
3. Ability work independently as well as in a mutli-functional team environment.
4. Working knowledge of Microsoft Office (Word, Excel, and PowerPoint).5. Extensive working knowledge and experience with CATIA v.5.
6. Visual Basic, Matlab, Simulink, FiberSim, Determinent Assembly techniques, composite curing, and Geometric Dimensioning and Tolerance experience preferred.
7. Knowledge of principles of structural design mechanics including predicting strength and other possible structural instabilities.
8. Prior experience in FEM analysis preferred.
9. Strong mechanical design skills for all structural components of aircraft.
Mechanical Systems Design Physical Requirements :
1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
2. Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
4. Read, hear, speak, and see with no restrictions, as required by job duties.
5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
6. Effectively communicate in Business English language.
7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
Job Type: Contract
The Structures Company, LLC is an AA/EOE
 
Job Location: NC
Per Diem: yes
Overtime: yes
Duration: 12+ month
Start Date: asap
Input Date: 11/14/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Designer

Description:
Design Engineer responsible to support the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual definition, detailed design and 2D drafting of new and modified design.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solutions.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
5. Implement design solutions optimized for cost and weight.
6. Manages task execution to ensure on-time and on-target completion.
7. Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final assembly and installation requirements.
8. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
9. Searches for problem root cause and develop corrective action plans and solutions.
10. Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 0-10 years directly related experience
a. OR MS / MBA with 0-5 years of experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Functional knowledge of drafting rules.
3. Functional knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Familiar with FAR Part 23 or Part 25.
 
Job Number: 28-012
Job Location: Greensboro, NC
Rate: $38 to $62
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 01/23/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Unique Skills:
Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-143
Job Location: Savanah, GA
Rate: $59 - $62
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician

Description:
From the Hiring Manager:

* 5+ years’ experience in a manufacturing environment; government / military / defense background with vehicle mechanic and/or R&D experience preferred.
* Looking for a highly motivated individual able to get a task and complete it to the finish.
* Should have Research and Development (R&D) and fabrication experience.
* Fabrication = taking measurements & laying-out hole patterns & then drill or cut.
* Must have Mechanical experience with:
> Various types of drilling (through-hole, match, countersink, counter bore & step drilling)
> Schematic / Blueprint reading and comprehension (Mechanical)
> Measuring tools (Calipers, Tape Measure, Feeler gauge, etc.)
> Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)
* Mathematical conversions (Decimal to Fraction)
* Working understanding of engines and vehicle mechanics

Job Description:

> Assemble mechanical parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, travelers, etc.) into sub-units or complete units.
> Complete small wiring terminations as needed during mechanical assembly
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Works closely with engineering on new prototype projects
> Fabricates brackets, jigs, fixtures, and misc. metal work in support of projects
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality & engineering standards
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Preferred Certifications:

* ASE (Automotive Service Excellence)
* HVAC
* Working understanding of hydraulic pumps and cylinders


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 034_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes/Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 10/04/2017
Last Updated: 01/19/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Mechanical or Manufacturing Engineers

Description:
Project management or overhaul experience
 
Job Location: West
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Drafting Engineer

Description:
Mechanical/Drafter Engineer

Denver, CO
1 Year Contract
$45.00-55.00/Hr

1st Shift

• Mechanical Engineer / Drafter to support the design of the Mobile Launch Platform.
• Proficient in CREO version 2.0 modeling and drafting.
• 5+ Years’ Experience
• Beneficial to have knowledge in AutoCAD
 
Job Number: 7972
Job Location: Denver, CO
Rate: 45.00-55.00/Hr
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 12/12/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Metrology Engineer II

Savannah, GA
Long Term Contract
Pay Rate: DOE

Unique Skills:

Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***


Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions:
1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.

Languages Required (in addition to English): No Selection
 
Job Number: 8148
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/27/2017
Last Updated: 01/24/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC E