Job Search Results

179 listings were found that matched your search words: Keywords: Civil OR Industrial ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/01/24 Sunday 05:11PM Pacific Time by ContractJobHunter. )

Listings 1 - 179

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer

Description:




Applications Engineer



Location: Saginaw, Michigan



SCHEDULE
:

7:00 AM – 4:00PM 



SUPERVISOR:

Engineering Manager

Summary

 The Applications Engineer will be accountable to evaluate customer requests and site drawings, to ensure fit and function of our product. An application engineer will provide in-depth technical knowledge for all of our products in pre-sales and post-sales roles. You will provide sales drawings in Solid Edge Works and provide review of specifications specs to support the sales estimating and bidding processes. You will be a part of the product team and oversee equipment designs for fit and function. You will collaborate with R&D when new products are to be transferred in to production to ensure that our standards are kept and captured for reference. As a subject matter expert (SME) you will be a resource to the designers to transfer your knowledge in a way that will forward their ability to handle jobs accurately and efficiently. You will communicate with our customers and manufacture's representatives to ensure that we have whole and complete information. While communicating with outside sources, you will represent our company in a positive light only disclosing product and company data as appropriate for sales. You may be called upon to train our personnel as needed. Occasional travel, (up to 20%), may be required to visit sites, measure and ensure a fit for the customer and DC. You will be accountable to meet the product group standards, as assigned by the Engineering Manager. 



Essential Functions:

  • Listen to the needs of our customers and apply the correct equipment that will meet their needs.

  • Understanding of Wastewater, Storm water processes and various industrial processes.

  • Accountable for timely, detailed review of customer specifications to accurately support sales in bidding projects. Applying our application protocols, while assessing the needs of the project and coordinating information with other subject matter experts internally.

  • Exceptional customer service through professional, timely and accurate design support, communications etc.

  • Ensure our design standards are kept in tact through all phases of our projects.

  • As a subject matter expert (SME) you will be required to problem solve, learn new concepts and contribute sound application engineering to the company's products and processes.

  • Sales drawings turned around in 2-5 days (as required to support Sales), all drawings are to be delivered on time, consistent to DC standards, within budgeted hours and customer requirements.

  • Attend handoff meetings at receipt of PO and release to engineering; must support project application prior to submittal release as required to meet customer/DC Schedules.

  • Capture lessons learned with the product team, assess and implement changes/updates as needed into the application process and integrate this knowledge in to sales project management processes.

  •  Applications Engineer will ensure accuracy of engineering protocols, documented procedures.

  • Shall have in-depth knowledge of pricing, labor, alternative materials, marketing objectives & sales process.

  • Will follow all standards/processes as designated by company's QC, ERP and other process controls.

  •  Accountable for whole and complete product (fit and function) from proposal to post-sales.

  •  Due to the amount of interactions between customers and our internal teams; this position requires you to work in the office environment.




Education:



Bachelor Degree preffered  but not required.



College degree in Mechanical Engineering, Engineering Technology or Architectural Technology is strongly preferred or equivalent experience considered. .



Experience Required:


  • Required: Engineering of mechanical equipment 3 years or Architectural/Construction engineering 8 years 

  • Required: Computer Experience & Proficiency: MS Office programs, such as Outlook, Word and Excel


Required:


  • Proficiency in Solid Works or Solid Edge along, able to understand and translate mechanical blueprints.

  • Exposure to machinery design and mechanical concepts. Proven experience in resolving mechanical engineering production issues for equipment.


 Skills:


  •  Able to understand and create drawings (mechanical and civil) to industry standards.

  • Meticulous attention to detail, able to multi-task well and complete projects on time, within budget, to the customer's satisfaction.

  • Must have excellent customer and people skills: should be able to represent the company's image (consistent with the business motto of "you'll like working with us!”)

  • Must be self-initiating, independent, and able to organize time and diverse responsibilities.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-33344
Job Location: Saginaw, MI
Rate: 85000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-08-12 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.


Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)



Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software
 
Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Civil Engineer Lead, Environmental/Sewer

Description:
*This is a full time salaried position, located in Mount Holly, NJ.*

*Full benefit package including bonus*



We are seeking a permanent Civil Engineer who will be working on civil and municipal projects in the state of New Jersey. Applicant will be particularly involved designing and modelling sewer and storm water management/distribution, wastewater treatment, runoff and similar town/city infrastructure.



Work will include water and wastewater design experience including distribution, collection, pumping stations, public water supply wells, and treatment facilities. The position will have the applicant working in over 70 municipal entities in New Jersey.



Required:

*5 years’ experience in Environmental/sewer design engineer, stormwater runoff/drainage design or similar design and engineering projects.

*Experience working as a lead.

*Must reside within 1hr of Mount Holly, NJ; familiar with New Jersey Land use laws
*Some knowledge of AutoCAD or Civil 3D
*25% travel within NJ
*Must have an Engineering degree, Civil strongly preferred

*EIT



Pluses:

*PE
*Experience with stormwater modeling software such as HydroCAD

*ArcGIS experience


Benefits:
*Healthcare plan with a Health Saving Account (H.S.A)

*Dental – 2 plans to choose from
* 401(k)
* Profit Sharing
* Paid Holiday, Vacation & Sick time
* Life Insurance
* Supplemental Life Insurance
* Short & Long Term Disability
 
Job Number: 050
Job Location: MT Holly, NJ
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Construction Inspectors Highway/Bridge or Municipal

Description:
*Full time permanent, position with paid Overtime, located in Paterson NJ*
*Candidates must live within 1 hour of Paterson*

*We do not lay off during Winter months*



We are hiring construction inspectors who will specialize in Bridges, Roadways but also may work on other civil and municipal projects. Candidate will perform quality control for new as well as rehabilitation of roads/bridges and general site work, maintenance and protection of traffic, drainage, earthwork, paving, concrete work, reinforcement steel placement, utility relocation work, coordination and safety.



Candidate should have the background to comprehend contracts, construction plans, construction timing/sequencing, costs, etc. Applicant will also perform proper document control, quality assurance and records documentation, have good mathematical skills and hold inspection certifications.



Required:
*3-6 years conducting construction inspections to NICET standards.
* Heavy highway construction experience, specifically knowledge of bridge, structure and roadway construction methods and materials
*Current/valid State Driver's License REQUIRED with acceptable driving record
*Able to work during either daytime or nighttime shifts, including weekends and holidays as necessary



Pluses:
*Familiar with NJDOT construction, bridge (rehabilitation & new) and roadway (earthwork, sub base, concrete and asphalt pavement, drainage, sewer, waterlines and mains, lighting, guiderail and striping for rehabilitation / new) inspection and maintenance and protection of traffic for day night operations.
*Any of the following certifications: ACI or NETTCP Certification, NACE or AWI Certification, CCR - Erosion & Sediment Control Inspection NICET II, III or IV certification in Heavy Highway
*Knowledge of construction materials (steel, concrete, soil, hot mix asphalt, aggregate, etc.) *Familiar with surveying, recording linear measurements/geometric shapes (triangle, square, rectangle, trapezoid, cylinder, circle), density, weight, etc.
*NICET (NICET III or IV certification in Heavy Highway)
 
Job Number: 659
Job Location: Paterson, NJ
Rate: DOE
Per Diem: no
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - A220

Description:
Responsible to manage non-conformity/concessions and late changes to support production and to update the master data for the documentation package that accompanies the aircraft. Responds to technical questions, prepares new modifications for country specific constraints and explains about work orders and drawings, especially for aircraft (A/C) mechanical related items. Establishes and maintains effective communications with FAL production. Responsible for on-site training of new manufacturing engineering employees.
Qualifications/Basic Job Requirements:
The incumbent should have 5 years of relevant experience, preferably in manufacturing engineering of structure installations in an international aviation company.
Knowledge of the principles, practices, methods and tools used in manufacturing engineering.
Knowledge about non conformities/concessions and design query notes.
Knowledge of supply chain management.
Knowledge of quality management system.
Good knowledge of basic written and spoken English.
Experience working with A220 Aircraft
Education/Special Qualifications:
Must have a degree in Industrial Engineering, Mechanical Engineering or Aerospace Engineering or an equivalent combination of education and experience.
Other desirable skills and experience include:
Knowledge of Airbus Industries mechanical process & methods.
Knowledge of Airbus IT-Tools (TiCon, Zamiz, TAKSY, MODA, DocMaster, Adress).
Knowledge of common applications such as SAP/R3 (Module PP/PM).
Familiarity with the American aviation market.
Aircraft Technician experience from A/C manufacturer.
Knowledge about aircraft structure installation.
Knowledge of rules for aircraft design and manufacturing.
Intercultural experience.
Knowledge of health, safety and environmental regulations and practices.
 
Job Number: 1240535
Job Location: Mobile, AL
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with Active Secret Clearance

Description:
Electrical Engineer

Location: Lexington, KY

6 month contract

Active Secret Clearance required. 


Ideal candidate will have BS+6-10 years of experience or MS+ 4-8 years of experience. 

The Electrical Engineer will research, develop, design, and test electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development. Duties include creating wiring diagrams and harness assembly diagrams, resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised C-5 manufacturing wiring documents (Wire Routing Documents (WRDs), Termination Aids (TAs) and Wire Harness Master (WHM) sketches).

Candidate will be part of a team effort to develop C-5 wiring from design to installation, to include liaisoning between C-5 Avionics Wiring Design and Production/Manufacturing to ensure wiring requirements flow from design to installation are processed in accordance to specifications.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58182
Job Location: Lexington, KY
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: 11/11/19
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
Electrical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

*Job Description
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products. Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

*Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 7+ years of experience required.

*Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and/or NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable
 
Job Number: 11794
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 2
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: 40.25
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities layout / Manufacturing process Industrial Engineer

Description:
Facility Designer with special emphasis in Aeronautical Industrial Building design and integration, you will interface with the Facility Engineers, Process Engineers, Manufacturing Engineers and Maintenance staff to layout new facilities(Greenfield), utilities, structural components and equipment to ensure a fully functional project is provided to the end user, taking into consideration the ease of manufacturing, availability of materials, and constructability of the final product.

•Must be able to take concept drawings and sketches and produce a full complement of Architectural, Mechanical, Plumbing, HVAC, Electrical, etc drawings in accordance with the National CAD Standards.
•Uses geometric tolerancing methods to check fit, form, and function of the accuracy and content of Engineering CAD drawing and model files, PLM datasets and BOMs, and other engineering supporting documents.
•It is expected that the Facility Designer can perform routine sizing of piping and ductwork systems with final approval from the cognizant design engineer.
•Capable of developing restroom layouts, break room layouts, conference room layouts office furniture layouts, etc for use in new construction and remodel efforts.
•Able to integrate Structural and Architectural designs with other relevant disciplines such as Plumbing, Fire Suppression, HVAC, Electrical, etc.

o Bachelor’s Degree in relevant field. (education will be verified)
o Minimum of 5/10 years’ experience in light Industrial Facility and equipment designs.
 
Job Number: 222471
Job Location: Huntsville, AL
Rate: Hourly Rate 'Open'
Per Diem: yes
Overtime: possible
Duration: NEW project from the ground up - long term
Start Date: 2 weeks
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Engineer II- Job ID 38856

Description:
We have an Excellent Contract position for a Facilities Engineer to join a leading Company located in York, PA. When applying, please enter the job ID.

Plans, designs and coordinates facility renovations, layouts, equipment updates, and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations. Develops implementation schedules for maintenance and/or subcontractor activities relating to facilities modernization, coordinating those activities to minimize production/operation delays or lost time and ensures compliance to schedules and project objectives. Investigates need for new facilities and equipment; participates in a make or buy decision. Develops specifications for foundations, structural, electrical, mechanical and necessary utilities that support facilities project implementation. Ensures technical outcomes are consistent with established engineering principles and practices and that customer and company technical, system, performance, and quality requirements are met.

Job Responsibilities:
Creates, plans and performs engineering design, development and/or analysis tasks of moderate complexity for a project or may lead these activities for a small project. Ensures tasks meet cost, quality, schedule and performance requirements.
Applies engineering design and/or analytical theory, principles, techniques, and practices to a portion of a technical project.
Manages assigned facility projects in the area of training, including meeting with customers to define project scope, determining conceptual design approach, developing and monitoring project budgets and schedules, handling communication during construction, monitoring construction quality, negotiating changes, creating a punch-list and certifying completion for final payment.
Applies knowledge of facility design to solve moderately complex and clearly defined engineering problems. Selects the best methods or processes from among several existing alternatives.
Develops and writes technical documentation, makes revisions to existing documentation and provides input to technical papers or presentations. May deliver technical presentations.
Performs technical analysis, testing, calculations and evaluation of results to solve moderately complex engineering problems using specialized equipment and/or by computer programs.
Provides input to project leaders for the development of project plans, schedules, and budgets.
Develops and maintains effective relationships with customers to solve technical problems of moderate complexity.
Analyzes and interprets design specifications, drawings, documentation, models and/or test results to ensure technical designs comply with applicable engineering standards, military specifications, and product requirements.
Analyzes and recommend methods for improving efficiency and reducing the environmental impact of plant operations.
Provides input on equipment reliability and robust design.
Maintains up-to-date knowledge of relevant engineering discipline(s), industry practices, trends, and applications.
May direct the work of less senior technical personnel.
Maintains a safe work environment and ensures compliance with safety policies and rules.
Shares responsibility for self-development with immediate supervisor.
Job Qualifications:
B.S. degree in a relevant technical discipline or an equivalent combination of education and experience, plus 2 years of relevant experience.
Working knowledge of fundamental concepts, practices, and procedures of a relevant technical field of specialization.
Familiarity with current computer applications including Word processing, spreadsheet, desktop publishing, and CAD/CAFM software including MS Office Suite (MS Project, PowerPoint, Excel & Visio).
High mental/visual application required to analyze facilities problems and recommend solutions.
Preferred education/experience:
Certain positions may require a specific technical degree or prefer an M.S. degree. Prefer engineering experience with relevant applications in an industrial environment.
 
Job Number: 38856
Job Location: York, PA
Rate: $30.00 to $37.69
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Operations Analyst / Electrician for commercial facilities - Clearance URGENT NC

Description:
165718 Job Title: Facility Operations Analyst

Work Site Address : Fort Bragg, NC 28303
Job Number: 1810-1
Max Pay Rate: 24.50/hr
Position Type: Contract
Desired Start Date: 12/9/2019
End Date: 6/9/2020


Job Summary:
Responsible for repairing and installing electrical systems in new industrial construction and maintaining electrical equipment and wiring. Must be able to identify, troubleshoot and repair problems in electrical wiring that occur in an industrial setting. Expected to be able to run tests, isolate problems, replace faulty sections of wiring, and lay conduit for the new electrical systems. Work well with public as well as with co-workers and willing to listen to others.

Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Qualifications and Education Requirements
Must have good math skills, as need to take measurements and work with numbers.
Must also be able to read blueprints. Should have good overall knowledge of all building electrical systems and electrical theory.
Requires lifting up to 55 pounds and moving it without assistance between building and across campus effectively and efficiently
Must have a journeyman electrical license.
Must be able to pass CRC Physical Assessment

Qty 1 position needed

In need of an Electrician for commercial facilities. Please ensure that the candidates are technically qualified. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1810-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Engineer

Description:
Job Description: This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Location: Edwards AFB, CA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Flight Controls Engineer
(U.S. Citizenship Required*)
Edwards AFB, CA
2019-10185
Responsibilities:
• Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF).
• Expected to provide ground ops support at the F-22 & F35 CTF as needed.
• Team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.
• Serve as the principal focal point between aircraft maintenance and flight operations engineering personnel.
• Coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness.
• Provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives.
• Coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting.
• Coordinate as required with other organizations associated with test readiness.
• Act as the principal focal point between maintenance, engineering and flight crew.
• Relay maintenance related aircraft constraints to the aircraft FTE's.
• Consult with management on changes or problems.
• Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts.
• Adapt to quickly changing tasks and requirements and learn new skills quickly.

Qualification:
• Must have an active/current Secret Clearance.
• Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
• Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
• Experience in USAF maintenance activities and procedures, and T-2 modification processes.
• (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
• Exceptional planning and coordinating skills are required.
• Ability to interface with all levels of project management is desired.
• Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill.
• Above average oral and written communication skills are desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree combined with 4+ years of experience, or a Master’s Degree with 2+ years of experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10185
Job Location: Edwards AFB, CA
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Control Engineer

Description:
Flight Test Control Engineer

Edwards Air Force Base, CA
$85/hr
15 month W2 contract
Swing Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description
This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Number: 11852
Job Location: Palmdale, CA
Rate: 85.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
PDS is seeking Industrial Engineers for an assignment in Mobile, AL.
In this position the ideal candidate would be responsible for determining the most effective ways to manufacture an Aircraft. Develops ways to increase productivity, maximize efficiency, and manage human capital more effectively. Requires a Bachelor's Degree in Manufacturing, Engineering or a relevant field.
Experience in a multi-cultural work environment. Develop most efficient ways to use people, machines, materials and information
Help production and support functions to increase productivity.
Optimize methods of business organization.
Study product requirements and design manufacturing and information systems to meet requirements.
Develop management control systems.
Apply statistical methods and perform mathematical calculations to determine manufacturing processes, staff requirements, and production standards.
Assist in financial planning and cost analysis.
Design production planning and control systems.
Design methods to ensure product quality.
Resolve production problems.
Evaluate effects of product design changes
for management review, action, and control.
Estimate production costs.
Create sampling procedures and designs.
Evaluate accuracy of production and testing equipment.
Study and rearrange org charts, material flow, and operations sequence.
Coordinate quality control objectives and activities to resolve production problems, maximize product reliability, and minimize cost.
Communicate with management and user personnel to develop production standards
Ensure consistency of operations and products in the Single Aisle program.
 
Job Number: 1910108500
Job Location: Mobile, AL
Rate: open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: asap
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer II

Unique Skills:

- This role requires Industrial Engineer experience.
- It will focus on hand tool control and repair, 5S/6S, cutting tool organization, and liaison with site facility team.


Education and Experience Requirements:
Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.


Position Purpose:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Principle Duties and Responsibilities:

Essential Functions: 1. Conduct analysis with area Management and support staff to establish and maintain daily work activities. 2. Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures. 3. Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives. 4. Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks. 5. Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.). 6. Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests. 7. Support all Safety, Sustainability and Ergonomic initiatives as required. 8. Develop and Implement plant layout, process flow, and material handling techniques. 9. Support area Management in generating orders/requests for Tooling including management of tool priorities. 10. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions. 11. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. 12. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.

Additional Functions: 1. Develop and maintain work place methods and manpower requirements. 2. Assist in the training and development of entry-level industrial engineering personnel. 3. As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Ability to influence across functional disciplines. 3. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 4. Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc. 5. Lean Specialist certification or higher preferred.
 
Job Location: Tulsa, Ok
Rate: 52.50/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:
Industrial Engineer

Palmdale, CA
$75/hr
14 month W2 contract
First Shift, 9/80
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel. May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.
 
Job Number: 11593
Job Location: Palmdale, CA
Rate: 75.00
Per Diem: Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - A220

Description:
Responsible for determining most effective ways to manufacture an Aircraft. Develops ways to increase productivity, maximize efficiency, and manage human capital more effectively.
Qualifications/Basic Job Requirements:
2-5 years of experience in aviation
Experience working with A220 Aircraft
Knowledge of basic Production and Quality rules in aviation
Education/Special Qualifications:
A Bachelor's Degree in Manufacturing, Engineering or a relevant field.
Experience in a multi-cultural work environment.
 
Job Number: 1240524
Job Location: Mobile, AL
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Clearance CA

Description:
166412 Job Title: Industrial Engineer

Work Site Address : Palmdale, CA 93599
Job Number: 2070-1
Max Pay Rate: $75.00/hr
Start Date: 10/14/2019
End Date: 12/10/2020
Position Type: Contract


Job Summary:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.

May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Skills: Category Name Required Importance Experience
Areas of Expertise Lean Manufacturing No 4
Areas of Expertise Project Scheduling No 7
Soft Skills Interpersonal Skills No 7
Software Skills MS Office - Intermediate Level No 4
Technical Skills Data Analysis No 6
Technical Skills Scheduling No 7
Technical Skills Trend Analysis No 3

Qty 4 positions
 
Job Number: JE-2070-1S6
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 2

Description:
Industrial Engineer 2

Location: Everett, WA
Duration: 6 Months

Description:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience (e.g. Master). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13835
Job Location: Everett,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 4

Description:
Industrial Engineer 4

Location: Berkeley, MO
Duration:12 Months

Job Description:
Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Preferred skills include experience with constraint based scheduling software and/or simulation software (Examples include Aurora and/or Simio)

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.


Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13283
Job Location: Berkeley,, MO
Per Diem: available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Position Purpose:
• Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles.
• Assures assigned projects are accomplished within projected or approved cost.

Unique Skills:
• This role requires Industrial Engineer experience.
• It will focus on hand tool control and repair, 5S/6S, cutting tool organization, and liaison with site facility team.

Principle Duties and Responsibilities:
• Conduct analysis with area Management and support staff to establish and maintain daily work activities.
• Conduct analysis with area Management, support staff and Material Control to design and maintain part presentation requirements and procedures.
• Identify equipment, machinery, and facilities acquisition including justifications and economic analysis to support operational, Safety and Quality initiatives.
• Development and maintain Tool Box requirements and contents to include tool control, FOD prevention measures tool requirements matched to area tasks.
• Apply 3D print capability to assist in resolution of technical issues (shop aids, Protect the Product, etc.).
• Provide business case analysis in support of projects to include make/buy, MCR, Engineering Changes, Tooling requests.
• Support all Safety, Sustainability and Ergonomic initiatives as required.
• Develop and Implement plant layout, process flow, and material handling techniques.
• Support area Management in generating orders/requests for Tooling including management of tool priorities.
• Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, and employee suggestions.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Develop and maintain work place methods and manpower requirements.
• Assist in the training and development of entry-level industrial engineering personnel.
• As required, aid in development and maintenance of Business Continuity Plan. Perform other duties as assigned.

Education and Experience Requirements:
• Bachelor's Degree in Industrial, Manufacturing Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Industrial Engineering, Manufacturing Engineering, Operations Engineering or related technical experience.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Ability to influence across functional disciplines.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Demonstrated ability to operate computerized equipment, such as personal computers, CATIA, etc.
• Lean Specialist certification or higher preferred.
 
Job Number: 24-365
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: YES
Overtime: YES
Duration: 1+Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer- Multiple locations

Description:
Industrial Engineer

Location: Everett, WA & Berkeley, MO (Level 2, 3, 4)
Duration: 6+ months

Description:
Applies Industrial Engineering concepts, techniques, analysis and decision tools under general supervision to promote and assist in implementing changes in manufacturing, engineering and service operations. Assists in developing models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides summary analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Applies general industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Assist in research, design, development, improvement and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the application of Lean and other Industrial Engineering concepts for large scale systems integration and asset utilization. Under general supervision, manages, defines, negotiates, and controls the scope, cost, and timing of projects, and performs risk analysis using project management tools (e.g., work break-down structure, precedence network, resource allocation). Provides support to project completion. Utilizes engineering methods (e.g., mathematical models, simulation, statistics) to support the development of optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Under general direction, analyzes and designs value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout).

Education / Experience:
Bachelor's degree and typically 2 or more years' experience in an engineering classification or a master’s degree with experience in an engineering classification. Required: Bachelor or master’s degree from an accredited course of study, in engineering, com

Skill Code:
D26-Mfg Industrial Engrg.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Berkeley, MO
Input Date: 11/23/2020
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Renton, WA
Input Date: 11/23/2020
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

Industrial Engineers -- Multiple Locations

Description:
Everett, WA; Renton, WA; Berkeley, MO


Take your career to the next level with the help of our staffing specialists - Contact us today!

-Nationwide Opportunities
-Competitive Compensation
-Great Benefits
-Referral Bonus
 
Job Location: Everett, WA
Input Date: 11/23/2020
Firm Name: ICONMA LLC
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Email: constance@iconma.com
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO)

Description:
** An active SECRET (or higher) DoD Security Clearance is required **
** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **
** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates must be local so they can interview in-person **

Duties:
-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:
a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
d. Report all security-related incidents to the ISSM;
e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
f. Serve as member of the CCB, if designated by the ISSM;
g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
h. Formally notify the ISSM when changes occur that might affect system authorization;
i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
k. Ensure audit records are collected and reviewed; and
l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.

Skills:
Minimum Qualifications:
- Current SECRET (or higher) DoD Security Clearance
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
- Experience with Microsoft Windows and/or Linux system administration (2+ years)
- Familiarity with configuration control and change management (SCCM)
- Experience with networking concepts (switches, network security, TACLANE)
- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies:
- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies:
- Operating System and networking certifications
- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information system

The ideal candidate for this position must be able to:
- Report to work on time
- Perform job duties for a specific duration of time or within a given period of time
- Follow directions based on government requirements and company policies
- Interact well with co-workers and customers
- Accept constructive criticism
- Maintain regular/consistent attendance and a full-time schedule
- Maintain current status on projects
- Stay current on training requirements
- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education:
- Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
 
Job Number: 11733
Job Location: Jupiter, FL
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer- Job Id 38702

Description:
We have an Excellent Contract position for an Information System Security Officer to join a leading Company located in the Jupiter, FL area. When applying, please enter the job ID.

** Candidate must possess an active Secret Security Clearance. **
Please click on this link if you have any questions on how to obtain a clearance:
https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Job Responsibilities:
Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package.
Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS.
Report all security-related incidents to the ISSM.
Conduct periodic reviews of ISs to ensure compliance with the security authorization package.
Serve as a member of the CCB, if designated by the ISSM.
Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change.
Formally notify the ISSM when changes occur that might affect system authorization.
Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly.
Ensure all IS security-related documentation is current and accessible to properly authorized individuals.
Ensure audit records are collected and reviewed.
ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of Information System Security.

Basic Hiring Criteria:
Undergraduate degree in Information Technology or Cyber Security, but candidates with proven experience will not be excluded from consideration.
Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP).
Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP).
Experience with Microsoft Windows and/or Linux system administration (2+ years).
Familiarity with configuration control and change management (SCCM).
Experience with networking concepts (switches, network security, TACLANE).
Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis).

Desired Qualifications:
Operating System and networking certifications.
Knowledge of and experience with compliance with government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.).
Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting a critical information system.
 
Job Number: 38702
Job Location: Jupiter, FL
Rate: $70.00
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Program Engineer

Description:
This position has operational responsibility to the Manager, Services Engineering and functional responsibility to the Heads of Maintenance Engineering within AAECSE.

ESSENTIAL RESPONSIBILITIES:
Ensure the development and evolution of maintenance programs by respecting safety requirements and economic considerations for all existing and future programs while balancing conservative design inputs
Legacy programs (A310, A300-600, A320 Family, A330, A340, A350 and A380 )
New models and aircraft derivate (NEO, -1000, etc.)
Guaranty to meet Certification requirements and deadlines
Cope with widespread technologies
Ensure timely response to customer queries with good quality
Ensure that all deliverables (create, revise and publish) are available in due time
Cope with a steadily increase of workload by maintaining good quality
Keep close relation with Airworthiness Authorities and the maintenance engineering departments at the other sites
Provide assistance and advice to Airlines on maintenance programs and maintainability
Participate and/or chair airline/manufacturer meetings and maintenance working groups
Ensure transfer of in-service experience to the design offices for new aircraft programs/derivate
Represent company in operator meetings, and technical and international industry conferences
Provide maintenance engineering support expertise to other Customer Services divisions, as well as to other directorates (sales, marketing, certification...)
Carry out and/or manage complex technical matters with impact on safety or economic issues, without close supervision of the upper management level
Analyze and make synthesis to propose specific letters and documents for top management signature
Contribute to the establishment of a safe and cost efficient maintenance program
Ensure timely production and any (customized) evolution of MRBR/MPD in good quality
Contribute to the development engineering for new aircraft programs with maintainability requirements and verification reducing the maintenance costs
Contribute to the reduction of cost of ownership
Contribute to improve the product reliability, maturity and residual value of aircraft
Contribute to the safe operation of the fleet
Contribute to an excellent image
Travel out of the state and/or country for 1-2 weeks per occasion after initial training period.

Qualified Experience / Skills / Training:
Previous experience of MSG-3 methodology and familiarity with design and certification process advantageous. General knowledge of Continued & Continuing Airworthiness process beneficial
Able to critically analyze and challenge design data within the scope of the position
Customer service focused and able to understand customer needs and answer to their queries and demands
High interest/experience in working with extensive and highly integrated electronic data processing systems
Good coordination and relationship skills to deal with customers, partners, airworthiness authorities and other departments; a good team player
Tenacious, adaptable and flexible while being able to cope with highly demanding environment
Good presentation and communication skills
Fluent in English, both oral and written

Education / Special Qualifications:
BS in Engineering with at least 3 years of experience, preferably in customer services business (good general knowledge in the design and maintenance of cabin and cargo systems for modern civil aircraft). An advanced degree in engineering preferred.
www.hi-tecsolutions.com/jobs
 
Job Number: 1203354
Job Location: Mobile, AL
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
6 month W2 contract
PART TIME - 30 HOURS PER WEEK
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities: Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products. Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost.

The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications:
BS in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 20+ years of experience required.

*Experience/Qualifications:
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11657
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:

Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel. Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to: Identify potential fabrication problems, Draw attention to special fabrication requirements and Ensure the latest developments in manufacturing technology are considered in the design phase. Establish design inherent cost targets which reflect hardware target cost. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans. Establish touch labor cost targets on shop/lab activities as requested. Define tool and gage requirements. Provide the necessary input and support to the tool design group. Ensure adequate tools and gages are available when needed in the process. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.

Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems. Review and implement engineering changes to determine feasibility, producibility and delta cost impact. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions. Lead efforts to understand non-conformances and reduce Cost of Poor Quality. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications
BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree. 5+ years of experience required. *

Experience/Qualifications
Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware. Background courses in electrical design and/or manufacturing are desired. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, NASA-STD-8739.4, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 11562
Job Location: Windsor Locks, CT
Rate: 25.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II ( Gilbert, AZ ) 9552871 and 9617553

Description:
Manufacturing Engineer II ( Gilbert, AZ ) 9552871 and 9617553
12 Month Contract

Pay rate: $35-40/hr W2

Sr. Manufacturing Engineer/ Sr. Electrical Engineer- Electronic Control Work Center and Circuit Test Lab
Summary/Responsibilities:
This Sr. Engineer is responsible for Leading the Manufacture and Test of Space Flight Circuit Cards and Box Level Hardware.
- The candidate should have detailed technical knowledge and experience in the manufacture and test of space flight circuit card assemblies. Must have a working knowledge of manufacturing processes and industry specifications applicable to spaceflight hardware such as NASA-Std 8739.1, NASA-Std 8739.4, and IPC J-Std. Proficient in: Polymerics (staking and conformal coat) and related materials, component lead forming, and soldering. Expert in removal and replacement of components; Chip capacitors & resistors, FPGA, Inductors, components that are thermal bonded. Be able to write clear and concise instruction for manufacturing technicians to execute the work.
- The candidate should be proficient at interpreting complex engineering drawings, schematics, diagrams, and specifications and should possess excellent technical writing skills. Experience using MES ERP system or iBase-t Solumina is strongly desired. Authoring of work plans and test instructions to support the successful testing of circuit card and box level test
- Additionally, the candidate needs to manage Program Schedules to insure on-time and on-budget product delivery. Must have experience with Integrated Master Schedules (IMS) or Integrated Cost and Schedule (ICAS). Must have experience with Earned Value Management (EVM) A successful candidate with have demonstrated ability to translate complex IMS schedules to the factory floor Engineers and Technicians.
- The candidate should be able to proactively identify, document, escalate, support, and resolve technical issues and discrepancies test failure (TF) & Non-Conforming Report (NCR) and work with teammates (Engineering, QA, Management, and Customers) towards prompt resolution on moderately challenging problems. Experience with New Product Development, concurrent engineering, and design for manufacturability best practices a plus.

Qualifications:
Bachelor's degree in: Electrical Engineering, Materials Engineering, Operations and Production Management, Industrial Engineering, Manufacturing Engineering, or related Technical degree plus 5 years minimum of related experience in the satellite industry supporting Space Flight Hardware Manufacturing. Must be able to obtain security clearance (US citizenship required).
- Candidate must possess demonstrated leadership skills, excellent interpersonal skills with excellent verbal and written communication ability.
- This position may require weekend work and extended daily hours to meet production demands. Also, occasional short term projects with travel may be required.
- Knowledge of TipQA, Windchill, MES, COGNOS, Microsoft Project, Costpoint, and CREOView preferred.
 
Job Number: 9617553
Job Location: Gilbert, AZ
Rate: 40
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer- Solidworks

Description:
Job Responsibilities
•Reviews engineering designs to provide tooling, equipment, operation sequence, and other technical wherewithal to enable marine craft and land vehicles to be manufactured profitably.
•Seeks alternative manufacturing strategies to reduce production costs, increase output, or improve product quality.
•Analyzes engineering design to provide feedback to improve manufacturability of components and assemblies.
•Calculates labor hour and learning curve projections for new manufacturing programs.
•Oversees creation and maintenance of Manufacturing Bill of Material (MBOM) to break engineering product structure into logical manufacturing units and sequence to enable MRP order releasing, scheduling, and purchasing activities.
•Authors and maintains shop floor technical work instructions.
•Participates in Root Cause / Corrective Action (RCCA) activities to troubleshoot and prevent production defects.
•Ensures manufacturing processes and procedures comply with regulatory and contractual obligations.

Qualifications

Job Qualifications:
•Experience in shipbuilding, marine small craft, aluminum and steel welding, or construction of large fabricated assemblies is desired.
•Experience with Enterprise Resource Planning (ERP) / Material Requirements Planning (MRP) software and Solidworks or other 3D CAD programs is desired.
•Must be a U.S. citizen or Permanent Resident with the ability to obtain and maintain a security clearance.
•Must possess effective written and oral communication skills and the ability to work in a collaborative team environment.
•Applicants are expected to have the ability to apply logical or scientific thinking to a wide range of intellectual and practical problems.

Education Requirements: •Bachelor’s degree required. Preferred degrees are Manufacturing Engineering, Industrial Engineering, Mechanical Engineering, Naval Architecture, or Marine Engineering.
•Preferred years of experience per level: ◦Manufacturing Engineer: 2-6 years
◦Sr Manufacturing Engineer: 6-10 years.
◦Note: Level will be determined based on relevant experience, scope of role, reporting structure and management’s discretion
 
Job Location: New Orleans, LA
Rate: 45-48/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Manager

Description:
Nesco Resource is seeking a Manufacturing Manager of Facilities and Maintenance will have responsibility for facilities repair and maintenance and the supervision of employees in the Maintenance Department. While maintaining the facility, he or she will comply with all environmental, health and safety regulations. This position reports directly to the VP of Operations.



Location: Saginaw, Michigan

 

Job Descriptions:  




  • Comply with environmental, health and safety laws and regulations

  • Act as backup to the EH&S Manager 

  • Supervise, direct, schedule work and develop employees in the Maintenance Department

  • Hold employees accountable for quality and quantity of work

  • Develop training for employees

  • Plan and execute a preventive maintenance program

  • Conduct maintenance audits throughout the facility

  • Travel as necessary, including internationally

  • Work with all levels of internal personnel to achieve goals

  • Work with operations management to schedule machine and building maintenance and repair activities

  • Abide by the collective bargaining agreement, upholding contractual and work rules

  • Oversee all facility contracts together with the Purchasing Dept. for building and property maintenance and repair

  • Negotiate contracts with vendors and service providers

  • Develop and sustain positive vendor and service provider relationships

  • Achieve cost savings targets

  • Work a flexible schedule to include weekends and call-ins

  • Utilize problem solving methods to identify root cause and implement meaningful and effective corrective measures

  • Participate in planning and executing lean manufacturing events in the facility

  • Due to project planning and emergency situations, must be able to work a flexible schedule, including weekends, call-ins and extended hours. 


 Job Requirements:


  • BS degree preferred

  • Minimum 3 years’ experience in facilities management

  • Working knowledge of plant power systems, including, but not limited to primary switch gear, secondary switch gear and distribution system and plant systems; i.e. water towers, air compressors, heat treating, hydromation, waste treatment and process boiler, as well as the respective controllers

  • Experience with precision machining, industrial automation and CNC machines

  • Experience supervising in a unionized environment

  • Experience with the maintenance and repair of machine tools

  • Must be able to perform the physical requirements of the job including (but not limited to) walking, standing, bending, stooping, twisting, turning, reaching, grasping, ladder climbing, stair climbing, reading, speaking and lifting up to 50 pounds.

  • Excellent communication and presentation skills

  • Self-motivated team player

  • Hands on approach, willing to “roll up the sleeves”

  • Demonstrated leadership ability

  • Due to our status as a defense contractor, must be a US  Citizen


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-26802
Job Location: Saginaw, MI
Rate: 75000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-06-28 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Wayne
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Safety Support Engineer

Description:
****MUST be a U.S. Citizen****

COPS Management (required):
Work with Propulsion Systems Product Safety Manager (PSM) to understand and pro-actively manage the propeller product line entries into the Control of Process and Safety (COPS) database.
1. Review Product Safety Review Board (PSRB) approved COPS inputs, enter into COPS tool and track / facilitate through release process.
2. Examine engineering drawings prior to release to ensure alignment between proposed drawing changes and PSRB approved drawing mark-ups.
3. Provide targeted COPS searches and extracts on request.

PSRB / PSI support (required):
1. Assist with finalizing meeting minutes, coordinating drafting with contractor and final review and approval with the Product Safety Manager Check and update potential safety issue (PSI) and AI databases in coordination with Propulsion Systems PSRB minutes drafting and finalization.
2. Perform database queries to support issue management decisions at PSRB and requests from presenters.
3. Guide engineers in developing required documentation for safety part approval at the PSRB using product safety management processes and standard work.

RRCA Team support (additional potential tasks):
1. Assist in coordination of root cause corrective analysis project by task planning, AI tracking and management, and fault tree development.

Safety Risk Analysis (additional potential tasks):
1. Support ongoing needs for Continued Airworthiness Assessment Methodology (CAAM) statistically-based analyses to inform the Propulsions Systems PSRB and the Collins PSB in potential safety issue management decisions for Propellers issues.
2. Work with investigation teams to identify information required for generating risk models for potential safety issues.
3. Construct models to assess risk using Continued Airworthiness Assessment Methodology (Ref. FAA AC39.8)-consistent techniques for unaddressed / uncorrected issues and to evaluate effectiveness of possible Corrective Action Plans.
4. Research historical data to support severity hazard ratio development.
5. Work with statistician to resolve modeling issues.
6. Develop and interpret the models and perform peer reviews to ensure the highest possible analysis integrity.

Required Experience / Qualifications:
1. BS degree with 2+ years’ experience in industrial or aerospace engineering environment.
2. Excel and database processes and management.
3. Engineering drawing notations and familiarity.

Additional Beneficial Experience:
1. Engineering change control processes
2. Critical characteristic identification and management
3. Basic statistics and risk analysis
4. Ability to use Minitab tool for Weibull analysis
5. Systems engineering / reliability engineering

Additional Comments:
1. A desire to understand the relationship of how propeller hardware manufacture and servicing is controlled to ensure the safety of our customers and the flying public is essential.
2. Some experience with Aerospace systems / operation understanding is desirable.
3. Experience with fault tree, Failure Modes and Effects Analysis, and Failure Hazard Analysis methods is a plus.
 
Job Number: 11779
Job Location: Windsor Locks, CT
Rate: $72.42/HR
Per Diem: No
Overtime: Possible
Duration: 2 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Planner

Description:
Production Planner

Windsor Locks, CT
$39.88/hr
2 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The position is the focal point for the execution of daily activities to deliver high quality, highly engineered development and production hardware on-time to its customers. The selected candidate will be responsible for the timely performance of various manufacturing tasks ranging from requirements planning through the shipment of deliverables in support of NASA and DoD Programs. Applicants must exhibit a high degree of initiative and sound judgment, working independently and as a member of an Integrated Product Team. It is essential the individual be capable of adapting to changing conditions and work cooperatively in a team environment.

Specific responsibilities include:
o Interface with cross-functional IPD to ensure schedules are adhered to with proper sense of urgency to achieve customer delivery requirements
o Monitor production schedules and advance materials through assembly and test operations
o Proactively identify and mitigate risks associated with the execution of production plans
o Release production orders, compile historical build folders, and assemble hardware kits in support of 100% on-time starts
o Coordinate the utilization of outside processes and the shipment of hardware to customers
o Conduct root cause analysis when goals are not met and initiate corresponding corrective actions
o Initiate and support process improvement initiatives. o Understand and interpret ERP system requirements and accurately integrate complex production schedules

*Experience/Qualifications:
o Associate's /Bachelor's Degree preferred.
o Experience in Operations Management, Supply Chain Management, Industrial Engineering, Electrical Engineering, or Mechanical Engineering disciplines preferred Experience in Planning, Supply Chain, Procurement, Manufacturing, Operations, or a related field
o Self-directed
o Strong planning and organization skills with ability to be adaptable to changing priorities and assignments
o Manage daily tasks and come back with solid results / solutions
o Ability to read engineering drawings
o Ability to communicate effectively and persuasively, verbally and in writing, to individuals at all levels and to cross-functional groups
o Knowledge of ACE and/or Lean Six Sigma is encouraged.
 
Job Number: 11385
Job Location: Windsor Locks, CT
Rate: 39.88
Per Diem: No
Overtime: Possible
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC's.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Support Engineer

Description:
Product Safety Support Engineer
COPS Management (required):
Work with Propulsion Systems Product Safety Manager (PSM) to understand and pro-actively manage the propeller product line entries into the Control of Process and Safety (COPS) database.
* Review Product Safety Review Board (PSRB) approved COPS inputs, enter into COPS tool and track / facilitate through release process.
* Examine engineering drawings prior to release to ensure alignment between proposed drawing changes and PSRB approved drawing mark-ups.
* Provide targeted COPS searches and extracts on request.

PSRB / PSI support (required):
* Assist with finalizing meeting minutes, coordinating drafting with contractor and final review and approval with the Product Safety Manager Check and update potential safety issue (PSI) and AI databases in coordination with Propulsion Systems PSRB minutes drafting and finalization.
* Perform database queries to support issue management decisions at PSRB and requests from presenters.
* Guide engineers in developing required documentation for safety part approval at the PSRB using product safety management processes and standard work.

RRCA Team support (additional potential tasks):
* Assist in coordination of root cause corrective analysis project by task planning, AI tracking and management, and fault tree development.
Safety Risk Analysis (additional potential tasks):
* Support ongoing needs for Continued Airworthiness Assessment Methodology (CAAM) statistically-based analyses to inform the Propulsions Systems PSRB and the Collins PSB in potential safety issue management decisions for Propellers issues
* Work with investigation teams to identify information required for generating risk models for potential safety issues
* Construct models to assess risk using Continued Airworthiness Assessment Methodology (Ref. FAA AC39.8)-consistent techniques for unaddressed / uncorrected issues and to evaluate effectiveness of possible Corrective Action Plans
* Research historical data to support severity hazard ratio development
* Work with statistician to resolve modeling issues
* Develop and interpret the models and perform peer reviews to ensure the highest possible analysis integrity.
Education:
BS Engineering or equivalent
Required Experience / Qualifications:
BS degree with 2+ years experience in industrial or aerospace engineering environment
Excel and database processes and management
Engineering drawing notations and familiarity
Additional Beneficial Experience:
Engineering change control processes
Critical characteristic identification and management
Basic statistics and risk analysis
Ability to use Minitab tool for Weibull analysis
Systems engineering / reliability engineering
Additional Comments:
A desire to understand the relationship of how propeller hardware manufacture and servicing is controlled to ensure the safety of our customers and the flying public is essential.
Some experience with Aerospace systems / operation understanding is desirable.
Experience with fault tree, Failure Modes and Effects Analysis, and Failure Hazard Analysis methods is a plus.
 
Job Number: 51736
Job Location: Windsor Locks, Ct
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer - Cockpit Display Systems - China.

Description:
Senior Engineer - Cockpit Display Systems - China.

Our client requires a Senior Engineer to support the design and development of their new Cockpit Displays System for Civil Aircraft.

We seek Engineers with strong knowledge and experience of working on modern cockpit display systems. Good knowledge of ARINC 661. The selected Engineer must be prepared to work in China. They must be a good communicator and will be an important part of our Client's team.

Role duties and Responsibilities:

:

  •  Technical lead to define a competitive CDS solution, update plans and process for a new part 25 civil program.
  • Experience on ARINC 661 standard, A661 server and widget design (including requirement and architecture) for cockpit display system.
  • Interface with customers and act as a technical domain expert on Display eco-system.
  • Provide supplier oversight and technical issues resolution with existing CDS program.
  • Support the establishment/update of sound system/module requirements capture and development processes, system design process, methods and concepts.
  • Document related technical data of assigned projects in conformance with engineering policies and procedures.
  • Conduct architecture activities at appropriate system/module levels.
  • Integrate processes across functional areas to improve coordination and maximize efficiency.
  • Help to make significant decisions and recommendations on complex issues to achieve long-term results and strategic objectives.
  • Execute design, analysis, and evaluation of assigned projects adhering to business standards, practices, procedures, and product/program requirements, manage corresponding project schedules and costs.
  • Provide training to engineers on system design process, methods and concepts.

 
Job Number: BH-218-1
Job Location: China, China
Rate: Contract hourly rate negotiable in US$
Per Diem: --
Overtime: --
Start Date: 10/24/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Industrial Controls Engineer

Description:
JSG is hiring a Senior Controls Engineer in Monrovia CA

Responsibilities:

Ability to analyze complex data and present to management and engineers in understandable discussions
This requires strong technical and social aptitude for written and verbal communication
Identify obstructions and issues early to Project Managers and Management
Plan with System Engineering Manager and V.P. of Operations and Systems methods for long term Systems Group sales growth and cost reductions with improved quality
Complete pre-sale conceptual design, schedule, and cost estimation of software, electrical, and mechanical for semi-automated and fully automated industrial processing workstations developed from communication with customers
Implement HMI and GUI integration for system operation, motion control, laser control, resistance welder control, machine vision (Cognex), data collection and analysis, file management, and networking capabilities
Develop Structured, re-useable low-level and high-level motion control system code for Delta-Tau, Aerotech, Allen Bradley, and similar motion systems implementing controls and I/O functions.
This requires a strong background in motion control and S.T.E.M.
Supply mechanical design suggestions for a robust operation to mechanical engineers for detailed design implementation
Create Software Design Specifications (SDS) and Hardware Design Specifications (HDS) based on User Requirements Specifications (URS), purchase orders, quotations, sales orders, and any additional compliance documents
Build, develop, and evaluate prototypes for automation and control systems based on detailed SDS and HDS
Develop laser optics path and vibration isolation designs with input from Applications and Advanced Technology Departments and customer application results
Directly responsible for ensuring continuous Systems robotics, vision, motion control, and pick & place improvements
Experienced in kaizen methods applied to engineering and controls is a plus
Education/Experience:

Knowledgeable in software design tools and environments including .NET, Visual C++, C#, current Experience in C# is a plus. Fundamental background in Software Engineering.
Four-year degree in computer science, engineering, physics, or related discipline required. Masters Electrical engineering, Automation or Control Engineering preferred.
8 years+ experience in designing custom motion control, HMI, robotics, pick & place, and hardware for automated control systems.
3 years+ experience in designing custom machine vision applications preferred.
Experience with lasers and optics helpful
Electrical engineering design experience; Solidworks Electrical is a plus.
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion, longer-term projects.
Preferred applicants will have experience in DLL generation for selected software-controllable systems components
Ability to travel occasionally
 
Job Number: 375699
Job Location: Monrovia, CA
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Manufacturing Engineer (Engines)

Description:
Job Description
Major purpose:
Major functions: IDENTIFY DETAILED DESCRIPTION OF WORK:
-Develop and document processes using equipment, tooling, and material handling (Internal and Purchased)
-Create and maintain the layout of the work area
-Work with cross functional team to ensure processes to meet Quality, Cost, and Delivery metrics
-Document processes based on supplied documentation using equipment, tooling, and material handling (Internal and purchased)
-Create and maintain the layout of the work area
-Evaluate work methods, prepare and / or modify documented work instructions
-Specify tools, gages, fixtures and any related support equipment for assigned areas of responsibility
-Interface with vendors on problem resolution, fixture design and build or rebuilding of tools and fixtures
-Train Team Leaders and UAW employees on proper execution of work instructions as needed
-Analyze new product quotes and provide cost estimates on tools, fixtures, machines, gages and recurring labor
-Support production by resolving process, producibility and quality problems using Lean Sigma techniques
-Write Scopes of Work (SOW), detailed presentations, and financial justification for the procurement of capital equipment
Technical/Functional skills:
Education/Experience/Licenses etc.: DESCRIBE ANY JOB REQUIREMENTS AND/OR BONAFIDE OCCUPATIONAL REQUIREMENTS:
QUALIFICATIONS:
REQUIRED
- Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Technology with a minimum of 5 years experience required or 21+ years of engine manufacturing experience
- Must have extensive hands on experience with machining equipment from 1950’s to current (Manual, CNC and Automation)
- Availability for occasional business travel
- Availability for casual overtime based on workload and/or urgency
- Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment
- Must be familiar with, and able to utilize all Microsoft Office Applications
- Good written and verbal communication skills required
- Must have experience in working in a manufaturing machining shop ,and experienced in the following:
- Set-up and operation of manual and CNC machining equipment
- Process Planning Software
- Bill of Material structures
- Assembly fixture concepts & Design
- How to work with suppliers in the design and fabrication of fixtures, tools, parts or machines
- How to work within a union environment
- Must be able to read machining and assembly prints and correlate them with the Bill of Material and associated processes
- Must understand metric measurements and tooling
- Previously held security clearance preferred. Ability to get security clearance required
- Must be able to move freely, with or without accommodation, throughout the manufacturing environment

PREFER
- Project Management experience, have used MS Project in the past and have developed Statement of Work, Work Breakdown Structure, and Schedules
- Understanding of Geometeric Dimensioning & Tolerancing techniques
- Working knowledge of using CAD models and programs in ProE and AutoCad
 
Job Location: Muskegon, MI
Rate: 50-55/hr
Per Diem: No
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Project Architect

Description:

Nesco Resource is partnering with a national architectural firm in its search for a Sr. Project Architect for its Latham location. Our client is grounded yet progressive and offers competitive compensation and benefits!



Candidates should come with 8-10 years of experience in architectural CAD production and document coordination. In this role, you will be developing and executing architectural design work for both public and private clients .You will also coordinate the efforts of both in-house and outside teams who handle structural engineering, MEP design, civil and environmental engineering services. We're looking for an enthusiastic go-getter who is just as comfortable managing the work as they are interfacing with clients.



Job Responsibilities




  • Makes decisions and recommendations that are recognized as authoritative and have an important impact on extensive architectural activities.

  • Ability to demonstrate creativity, foresight and mature architectural judgment in anticipating and solving challenging architectural problems.

  • Determine project objectives and requirements.

  • Develop standards and guidelines for diverse architectural activities.

  • Determine compliance with technical documents and industry specific standards and codes.

  • Involved in the analysis of client problems in conceiving and developing architectural solutions to those problems.

  • Manage, coordinate and mentor staff and project level employees.

  • Manage all aspects of client relations including attending meetings.

  • Perform other like duties as assigned.



Education and Qualifications




  • 10+ years of architectural design experience.

  • Extensive knowledge of Architectural Design.

  • Exceptional knowledge of AutoCAD, Revit and other BIM software.

  • The ability to work and thrive in a team environment.

  • Knowledge of project specifications & CSI division formatting.

  • Strong organizational, time management & multitasking skills.

  • Excellent communication skills both oral and written.

  • Proficiency in Photoshop, Sketch-Up, and Microsoft Office.

  • Bachelor's degree in Architecture highly desired.

  • Professional RA, desired.

  • Architecture enrollment in NCARB IDP preferred.

  • LEED certification a plus.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38618
Job Location: Latham, NY
Rate: 125000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Henry Hunn
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Structural Revit Designer

Description:
Nesco Resource is partnering with an engineering firm in its search for contract Sr. Structural Revit Designers to reinforce their team of skilled multidiscipline designers and engineers. These positions start out on a contract basis with the potential for permanent hire. Great exposure to global clientele/projects.



The ideal candidate is committed to producing high quality deliverables on varied projects for advanced technology clients. Our client's team produces exceptional solutions to complex problems through constant coordination.



As an integral part of the client's team, you will begin by completing specific design assignments under the guidance of a senior designer or structural engineer. Additional responsibilities will be provided based on performance.



Primary duties and responsibilities:

  • Produces organized structural plans and details that support lead discipline systems.

  • Assist lead structural engineer in development and coordination of structural support scope.

  • Models or drafts design into completed working details and drawings through interpretation of the design and application of design fundamentals.

  • Develops understanding of multifaceted client to better solve unique conditions.

  • Applies creative problem solving skills to see beyond standard answers.

  • Consults with supervisor to screen assignments for unusual or difficult problems and selects appropriate methods and techniques to apply.

  • Exercises judgment for some aspects of design, but receives supervision and direct input on new aspects of assignment.

  • Communicates with supervisor concerning progress or problems in an assigned task.


Requirements:


  • Structural or Civil Associate's degree or any related engineering technology.

  • 6+ years of structural design experience required.

  • Experience with Revit required.

  • Experience with AutoCAD beneficial.

  • Self-motivation to clarify scope of work, anticipate issues, propose options and find cost-effective or schedule-driven solutions.

  • Strong problem solving skills and flexibility in a fast-paced environment.

  • Ability to provide clear direction and expectations to designers and contractors.

  • Practical field experience with active involvement in construction areas preferred.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-35440
Job Location: Hillsboro, OR
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design - Rotor-craft

Description:
Design complex, standard or custom, mechanical and structural airframe installation packages in new and/or retrofit aircraft. Create engineering drawings, interface with pertinent stakeholders in certification, production and flight test, support fleet sustainment activities and support STC projects.
Primary Position Responsibilities:
Create detail/assembly/installation drawings for structural and mechanical systems.
Review and facilitate engineering package release.
Can lead groups of engineers to complete projects along with representing the group at management meetings
Works independently with minimal supervision from Engineering management.
Work is reviewed upon completion for adequacy in meeting company objectives.
Coordinate essential information into the configuration management system listing mechanical and structural installations for each assigned project.
Participate in developing pricing information based on installation effort and provide quotes to Marketing Department for standard and custom options on new aircraft.
Support Marketing, Field Service, Flight Test and FAA Certification organizations as needed.
Act as liaison to manufacturing and production efforts as needed.
Support installation, functional and operational tests, and ground and flight tests.
Performs Functional Hazard Analysis and Systems Safety Analysis as required.
Performs preliminary stress analysis in support of initial layout and design concept.
Additional Responsibilities:
Education: Required: Bachelor's degree in Aeronautical/Mechanical/Civil Engineering from an accredited college/university or equivalent applicable work experience.
Preferred: Master's Degree from an accredited college/university in engineering
Experience: Required: Six or more years of directly applicable engineering experience in an aviation/aerospace manufacturing or completions environment utilizing a rotorcraft.
Required: Knowledge of aviation/aerospace structural design requirements, aviation/aerospace industry standards and the Federal Aviation Regulations.
Technical Systems Proficiency: Must be proficient with Microsoft Office Suite programs.
Minimum 8000 hrs CATIA V5 (or similar 3D modeling software), familiarity with AutoCAD and SAP programs
Experience with project management tools is preferred.
Citizenship: US Person under ITAR definition (U.S. Citizen, Permanent Resident of the US.)
 
Job Number: 1222424
Job Location: Dallas, TX - Texas
Rate: 60.00 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
A Structural Design Engineer job in Mojave, California is currently available through Belcan. In this role, you will be responsible to review planned manufacturing procedures to ensure compliance with design specifications and intentions, support test definition for verification testing of components and subsystems, and manage components and subsystems through their full life cycle. To be considered for this role, you will need to have composite design and production manufacturing experience. Bachelor's degree from an ABET (or equivalent) accredited institution, with concentration in Aeronautical and Astronautical Aerospace, or Mechanical Engineer. This is a great contract opportunity with a growing company.

Structural Design Engineer Job duties:

* Assist Engineering Manager in further refinement of design practices, philosophy and execution.
* Work closely with Engineering Manager to forecast completion dates and estimate work package durations.
* Provides development, mentoring, and training opportunities for engineers through excellent coaching and leadership skills.
* Review, update, and check engineering definition of structural components and assemblies based on records from the prototype build project.
* Develop standardized design criteria, documentation and templates.
* Assist in the setup of configuration management processes utilizing Product Life cycle Management (PLM) software.
* Support the review of manufacturing plans and procedures to ensure compliance with design requirements.
* Support the creation of structural test plans which will be used to verify that manufacturing processes meet design intent and requirements (according to part 25 FAA requirements).
* Coordinate with Analysis and Testing departments to ensure component performance.
* Support test definition to verify that components and manufacturing processes meet design intent and engineering requirements.
* Participate in the review, approval and release process of engineering definition.

Qualifications:

* Bachelor's degree from an ABET (or equivalent) accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering.
* Ten plus years of experience in structural design engineering for aerospace composite fabrication and assembly processes.
* Proficiency with CATIA V5 a must.
* Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Generative Shape Design (GSD), Composites (CPD).
* Experience using GD&T and ASME Y14.5M-1994 drafting standards.
* Understanding of part 25 FAA requirements.
* Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly).

ITAR Requirements
To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain te required authorizations from the U.S. Department of State.

If you are interested in this Structural Design Engineer job in Mojave, California, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 293052
Job Location: Mojave, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Revit Designer

Description:
Nesco Resource is partnering with an engineering firm in its search for contract Structural Revit Designers to reinforce their team of skilled multidiscipline designers and engineers. These positions start out on a contract basis with the potential for permanent hire. Great exposure to global clientele/projects.



The ideal candidate is committed to producing high quality deliverables on varied projects for advanced technology clients. Our client's team produces exceptional solutions to complex problems through constant coordination.



As an integral part of the client's team, you will begin by completing specific design assignments under the guidance of a senior designer or structural engineer. Additional responsibilities will be provided based on performance.



Primary duties and responsibilities:

  • Produces organized structural plans and details that support lead discipline systems.

  • Assist lead structural engineer in development and coordination of structural support scope.

  • Models or drafts design into completed working details and drawings through interpretation of the design and application of design fundamentals.

  • Develops understanding of multifaceted client to better solve unique conditions.

  • Applies creative problem solving skills to see beyond standard answers.

  • Consults with supervisor to screen assignments for unusual or difficult problems and selects appropriate methods and techniques to apply.

  • Exercises judgment for some aspects of design, but receives supervision and direct input on new aspects of assignment.

  • Communicates with supervisor concerning progress or problems in an assigned task.


Requirements:


  • Structural or Civil Associate's degree or any related engineering technology.

  • 3-8 years of structural design experience preferred.

  • Experience with Revit required.

  • Experience with AutoCAD beneficial.

  • Self-motivation to clarify scope of work, anticipate issues, propose options and find cost-effective or schedule-driven solutions.

  • Strong problem solving skills and flexibility in a fast-paced environment.

  • Ability to provide clear direction and expectations to designers and contractors.

  • Practical field experience with active involvement in construction areas preferred.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-35434
Job Location: Hillsboro, OR
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sarah Royer
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Systems Engineer

Chula Vista, CA
$40.25/hr
1 year W2 contract
First Shift
Possible Travel
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION**

Description:
Manages systems integration, technical design, model based design, systems analysis for supportability and effectiveness of technological systems, systems analysis for safety of system, systems research, systems verification or validation planning, architecture development, and requirements for commercial, industrial and governmental purposes. Integrates system activities to support the aforementioned tasks. Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.

Additional:
Responsible for requirements management and supplier design oversight. Will be responsible for managing design responsible suppliers to ensure compliance to Aerostructures technical requirements while keeping project within allocated cost and schedule. Requires individual with strong technical skills with experience managing projects with little oversight.

Bachelors Degree required
 
Job Number: 11451
Job Location: Chula Vista, CA
Rate: 40.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Technician - Test - Level 3 - Secret Security Clearance

Description:
​PDS Tech Inc. is seeking candidate for DOD - Technician, located in Clearwater, FL.
MUST have active Secret Security Clearance

Summary:
  • MUST have active Secret Security Clearance
  • This is for final assembly testing for guidance and navigation systems. 
  • Performs standard testing processes on a variety of equipment and records and analyzes results.
  • May recommend changes in testing methods or equipment changes.Familiar with standard concepts, practices, and procedures within a particular field.
  • Relies on experience and judgment to plan and accomplish goals.
  • Performs a variety of tasks.
  • Works under general supervision.
  • Typically reports to a supervisor. 
  • Conduct performance and diagnostic testing with automated and manual test operated equipment. 
  • Perform Automated System Level Testing by following detailed written procedures and applying knowledge on the job experience on multiple segments. 
  • Handle and process customer material, test records, and associated documentation. 
  • Document system level events and failures for repair and supply detailed information within eFactory for reliability requirements. 
  • Perform and complete varied tasks through the use of knowledge-based experience, adhering to work instructions and applying client policies and procedures. 
  • Perform test set-up and teardown of associated equipment and cables, storing in designated locations when not in use. 
  • Utilize product & process knowledge to conduct high level troubleshooting. 
  • Support the flexible workforce initiative training and working across multiple test cells and products. 
  • Coach, mentor, and train Interact with other Test Team members. 
  • Collaborate with Engineering and other support personnel to identify improvements to equipment, processes, and overall productivity. 
  • Coordinate with Engineering and pertinent support personnel to resolve equipment, software, and procedural issues or failures.
  • Comply with detailed instructions on all work applying client policies and procedures. 
  • Utilize tools, computers, and office equipment as required to complete job related tasks. 



Prerequisites: 
  • MUST have active Secret Security Clearance
  • Candidates should have a background in Avionics testing and troubleshooting from military or civilian aviation.
  • Any system level or navigation testing over temperature and dynamics a plus.
  • Perform all other related duties as assigned. 
  • Requires knowledge of industry specific tests and testing equipment.
  • 2+ years of experience in the field or in a related area. 
  • Minimum HS; preferred Associate, Technical, or military equivalent. 
  • A certain degree of creativity and latitude is required.



 
Job Number: 1810082501
Job Location: Clearwater, FL
Duration: 9 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e06uAAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11431
Job Location: Marietta, GA
Rate: $53.53/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with most recent investigation completed within the last 5-years****

Job Description:
1. Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
2. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.
3. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
1. Minimum of 8-years of demonstrated professional Tool Design experience.
2. Proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
3. Proficient in the use of Geometric Dimensioning and Tolerancing.
4. Comprehensive knowledge and experience in aircraft tool design and fabrication, to include metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
5. Must be US citizen.
6. Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
1. Comprehensive knowledge and experience in the production of aircraft and related tooling to include; metallic and composite materials, composite cure, trimming, drilling, machining, forming, welding, assembly and inspection.
2. Significant CATIA-V4 experience.
3. Experience in structural analysis and proficient in material selection/sizing.
4. Experience in electro-mechanical/pneumatic/hydraulic systems design.
5. Experience working in a fast paced, developmental environment.
6. Experience writing technical reports and presenting technical data.
7. MS-Office proficient.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11430
Job Location: Fort Worth, TX
Rate: $56.05/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected. Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.
- Must be US citizen.
- MUST HAVE Active/Final Secret clearance with most recent investigation completed within the last 5-years.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11582
Job Location: Palmdale, CA
Rate: $85.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer / Catia V5 - Clearance CA

Description:
166408 Job Title: Tool Design

Work Site Address: Palmdale, CA 93599
Job Number: 2012-1
Max Pay Rate: $75.00/hr
Start Date: 9/17/2019
End Date: 9/11/2020
Position Type: Contract

Job Summary:
Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Catia Yes 9 6 + Years

Qty 4 positions

Applicants must not have applied for Tool Design at LM- in the last 6-mo.
 
Job Number: JE-2012-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Welder

Description:
Nesco Resource is hiring a Welder for a prominent Manufacturing Company located in the Danbury, CT area.



Under general supervision, the welder/pipe fitter is responsible for assembling and installing piping systems, pipe supports, and hydraulic and pneumatic equipment. Installs pipe for steam, hot water, heating, cooling, lubricating and industrial production and processing systems. He is also responsible for welding as it pertains to industrial burners, piping systems ranging from 1/2” to 12” and other fuel oil or steel plate assemblies.



Required Qualifications: Minimum education requirement: HS graduate or GED. Minimum 1-2 years' experience in manufacturing or industrial setting. Must be capable of interpreting blueprints, fabricating and welding to specifications. Must be able to perform job in safe manner and produce a quality product. Must successfully complete weld tests, which passes both visual and X-ray testing when needed. Must show qualification in welding per ASME Section IX in at least 3 welding methods when needed. (SMAW, FCAW, GTAW, GMAW) Must know various piping applications Must know how to assemble carbon and stainless weld pipe and screw pipe. Must know how to use associated power tools to produce a quality product in a timely manner (grinder, saw, drill, plasma cutter, drill press, break etc) Has the ability to multi-task Has the ability to work in a team-oriented environment Preferred Qualifications: 1 to 2 year diploma in welding or related instruction 4+ years experience in metal forming or in manufacturing or industrial setting Forklift certified Holds a valid driver's license OSHA 10 or greater.



This Position is Monday - Friday, 7:00 am - 3:00 pm It is a Right to Hire/ Temp to hire position. The pay is from $20.00 - $ 30.00/hr depending on experience.


 
Job Number: 19-41304
Job Location: Danbury, CT
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-01-04 00:00:00.0
Start Date: 2019-10-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Rebecca Seidel
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Back to Advanced Job Search