Job Search Results

623 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 02:11AM Pacific Time by ContractJobHunter. )

Listings 1 - 623

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2424 - MATERIAL & PROCESSES ENGINEER - cv, word doc only

Description:
Join the Client Completions Centre responsible for the production of the Client aircraft. Our goal is to provide the ultimate customer experience for the world most luxurious business aircraft cabin interiors.

Work in a team of engineers to support special projects, the production floor and new product development.

Sign off on packages of engineering drawings ensuring compliance to regulations.

Write test plans, test reports and other support documentation.

Work closely with the flammability cell and propose solutions to flammability issues.

Support certification and qualification documentation review from our suppliers.

Support a flexible work schedule.

Bachelor degree in Mechanical, Aerospace, Materials or Chemical engineering (or equivalent), with a minimum of 5 years of experience in Materials & Process engineering.

Have a strong background in materials, manufacturing processes and chemical processes.

Are familiar with aircraft interior materials and processes, including but not limited to composite panels, assembly techniques and cabinet finishing.

Are familiar with flammability certification requirements as per FAR 25.

Are familiar with engineering drawings and drafting principles.

Are proficient in Microsoft Office (Word, Excel, etc.)

Have general knowledge of Catia V5 and Enovia (asset)

Have the ability to resolve engineering problems in a manufacturing environment and able to manage very complex and critical engineering projects with minimal supervision.

Bilingual - have strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2424
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2424 - MATERIAL AND PROCESSES ENGINEER - cv, word doc only

Description:
Join the Client Completions Centre responsible for the production of the Client aircraft. Our goal is to provide the ultimate customer experience for the world most luxurious business aircraft cabin interiors.

Work in a team of engineers to support special projects, the production floor and new product development.

Sign off on packages of engineering drawings ensuring compliance to regulations.

Write test plans, test reports and other support documentation.

Work closely with the flammability cell and propose solutions to flammability issues.

Support certification and qualification documentation review from our suppliers.

Support a flexible work schedule.

Bachelor degree in Mechanical, Aerospace, Materials or Chemical engineering (or equivalent), with a minimum of 5 years of experience in Materials & Process engineering.

Have a strong background in materials, manufacturing processes and chemical processes.

Are familiar with aircraft interior materials and processes, including but not limited to composite panels, assembly techniques and cabinet finishing.

Are familiar with flammability certification requirements as per FAR 25.

Are familiar with engineering drawings and drafting principles.

Are proficient in Microsoft Office (Word, Excel, etc.)

Have general knowledge of Catia V5 and Enovia (asset)

Have the ability to resolve engineering problems in a manufacturing environment and able to manage very complex and critical engineering projects with minimal supervision.

Bilingual - have strong communication skills both in English (written, spoken) and French (spoken).
 
Job Number: 2424
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2434 - PROJECT MGMT - MATERIAL CONTROL - cv, word doc only

Description:
Document processes and define function-specific requirements

Establish project timelines ensure their implementation

Carry out improvement projects of various magnitudes, relating to Material Control (warehousing, internal transport, Expeditor)

Act as change agent at all levels

Propose and implement improvement ideas

Participate, organize, and facilitate improvement workshops with various stakeholders

University degree in Industrial Engineering or Business Administration, Logistics or Operations Management, or equivalent training / experience

Your teamwork skills are proven and you are recognized for your leadership

Are motivated by continuous improvement and enjoy project management

Are at ease in a unionized environment

Are ready to travel as required

Bilingual - must have excellent communication skills, both written and verbal in both English and French.

Knowledge of SAPand SAP-EWM is an asset.

An understanding of aerospace product certification is an asset.

Must have excellent negotiation, troubleshooting and problem solving skills.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Knowledge on implementation of change management activities is an asset.
 
Job Number: 2334
Job Location: Mirabel, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2438 - MISSION SYSTEMS ENGINEERING - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Candidates must possess a degree in Engineering (Systems Design, Aerospace, Electrical, Software, or Mechanical Engineering)

Must have a proven track record as a System Designer/Architect capable of conceptualizing, designing and building complex systems from initial customer requirements through to product delivery and commissioning.

Eight (8) or more years of experience of diverse product development in end-to-end deployed systems in a leadership role is required.

Experience developing and mentoring engineers and other technical staff.

The candidate must have comprehensive engineering knowledge in more than one discipline.
 
Job Number: 2438
Job Location: US Northeast, US Northeast
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24 Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2442 - MECHANICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mechanical engineers currently to support a number of programs across the Space Mission organization

Candidates will possess a Bachelor degree from a recognized university, in Mechanical Engineering or equivalent, and a minimum of 4 years of post graduate professional experience.

(Previous Aerospace experience and familiarity with MIL/ASME standards and ISO are a definite asset.)

Ability to interface with customers on a daily basis will be a key asset for this position.

Experience with CAD, preferably 3D is also an asset.

Must have solid oral presentation skills, as well as written communication skills.
 
Job Number: 2442
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2443 - STRESS ENGINEER - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Be responsible of the static strength calculation for the completion component using finite element and hand calculation.

Support the material selection and thickness for the different structure elements or validating the designer selection base on the stress analysis.

Prepare the official stress report in English for certification purposes.

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare Test Plans and approve Test Reports

Support various research and development projects

Bachelor in aerospace or mechanical engineering.

Minimum of 5 years MRB experience.

Experience, including at least one of the following skills, structural integrity qualification (loads, fatigue and damage tolerance) of airplane primary structural components.

Experience in stress analysis and FEM.

Have practical knowledge and experience of Nastran/Patran

Excellent knowledge of aircraft structure and system installation technical requirements.

Knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.
Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Bilingual - have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).
 
Job Number: 2443
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2444 - MATERIAL & PROCESSES - cv, word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare and approve Test Plans Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;
Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 8 years of pertinent experience (relevant experience in aerospace field is an asset)

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical aerospace and military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Good communication skills including good English and French writing and verbal skills.

A team player, working in a multidisciplinary team.

Good command of various software (MS Suite, Outlook, Acrobat, etc.).

You are familiar with flammability certification requirements as per FAR 25.
 
Job Number: 2444
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2445 - PRODUCT STRUCTURE MANAGEMENT - cv, word doc only

Description:
Responsible for the Product Structure Management within the Global 7000-8000 Program for Interiors and Completions Engineering.

Create and maintain the top levels of a configured product structure from the design phase through certification and transitioning to a sustaining program.Participate in the organization of the completions product structure to optimize Engineering packages with all available customer options.

Participate in the maintenance of the Options Catalog.

Configure the engineering packages in the PLM system and create AC specific product structures.

Work with the Customer Interfacing Team to create project specific Options listings.

Create the Customer Configuration Lists defining all engineering packages required to meet selected options and create Top-Level AC specific engineering lists.

Maintain and define rules controlling the applicability of the Engineering packages in relation to Customer options. Program these rules in the VSpec Customer Definition Software.

Responsibility for control, health and quality of the Aircraft Interiors configured product structures.

Keep an oversight over the product changes and maintain the product structure.

Support the Completions Engineering groups at different
development and customer aircraft definition milestones as needed.

A degree in Aerospace or Mechanical Engineering or equivalent education.

Minimum of 5-7 years%u2019 experience in design, product configuration management.

Possess strong knowledge and technical expertise of product structure configuration within a PDM/PLM tool is essential.

Knowledge of aerospace industry best practices.

Are proficient with ENOVIA VPLM V5 product suite, especially with the product configuration workbenches.

Have knowledge of Business Aircraft Completions.

Experience on CATIA V5, experience with Knowledge Based Engineering (KBE) is an asset

Have experience with SAP & eProduct.

Have experience in pulling together the efforts of varied groups with different objectives and mindsets towards a common objective.

Are resourceful in identifying and removing roadblocks and looking for creative ways to overcome challenges, and can maintain a strong adherence to the Program long-term vision.

Motivated by challenges and a drive for results, bringing a proven track record of success

Good communication and technical report writing skills - able to clearly and concisely convey information and vulgarize technical subjects.

Bilingual (French and English), oral and written is an asset.

Would be available to work on a Tuesday to Saturday schedule if required.

Have a sense of teamwork, the ability to work with minimal supervision, the ability to work in a dynamic environment, you are mobile (Montreal) and you are able to make decisions autonomously.
 
Job Number: 2445
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2D & 3D Model Checker (Aerospace)

Description:
Cabin Development 2-D Drawing & 3-D Model Checker

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Required Ideal Candidates will have 2-D Drawing and 3-D Model Checking experience with Aircraft Cabin Interiors and Systems to include but not limited to:
-Seats
-Galley
-Lavs
-LRU installations -Liners -Water System -Waste System

Education and Experience Requirements:
High school diploma/GED required
 
Job Number: 9078
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Level 3

Description:
Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Duration: 6 month contract
Shift: 1st Shift
Per Diem Split: Possible
Overtime: Possible

****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or have had one within the last 2 years****

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.

Responsibilities include:
- Your job, as a lead analyst, will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and texts similar to “Analysis and Design of Flight Vehicle Structures” by E. F. Bruhn
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM). MATHCAD and MATLAB are also used for 'hand' calculations
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation / integration of your analysis by providing support to the mechanic workforce as required

Skill/Experience/Education
Mandatory:
- 5+ years of stress analysis experience with a Finite Elementary Modeling (FEM) creation using ANSYS, NASTRAN or similar programs
- Bachelor of Science degree in Mechanical Engineering, Aerospace Engineering or Engineering Mechanics from an accredited University with five years of professional experience with a related Bachelor’s degree; or three years of professional experience with a related Master's degree.
- Considered career, or journey, level position

Desired:
- Experience with Microsoft Office Suite (Word, Excel, PowerPoint)
- Demonstrated previous success working in a team based environment to meet objectives
- Government report or thesis writing experience
 
Job Number: 8859
Job Location: Lexington, KY
Rate: $38.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer ( Chandler , AZ ) 8113878

Description:
Aerospace Engineer ( Chandler , AZ ) 8113878
12 Month Contract

Pay Rate: $45-50/hr , maybe more for the right candidate

**SECRET CLEARANCE STRONGLY PREFERRED, BUT WILL ACCEPT CANDIDATES WITH THE ABILITY TO GET CLEARANCE**

Job Snapshot:
Position will support design, integration, analysis and test of launch vehicle ordnance, pneumatic, and motor subsystems. Mechanical or Aerospace engineering experience is preferred.
Perform ordnance, motor, and pneumatic systems analysis, design, development, and test activities. Develop component or subsystem specifications, test procedures, and analysis tools. Run development, qualification, and lot acceptance tests. Document and present analysis and test results as required.

Top three skills:
• Writing and executing test procedures and work instructions
• Analysis and requirements verification
• Ability to generate engineering documents including specifications, test reports, drawings, and presentations
 
Job Number: 8113878
Job Location: Chandler, AZ
Rate: 50
Per Diem: split
Overtime: poss
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer I - Atlanta, GA

Description:
STS AeroStaff Services is hiring Aerospace Engineer I in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.


Qualifications:

• Bachelors Degree / Major Certification

• 0-3 Years Experience


Responsibilities:

• Perform a variety of engineering work in designing, constructing, and testing aircraft

• Designs and supervises the construction of aircraft and associated parts such as airframe, auxiliaries, communication equipment, controls, fuselage, and powerplant


We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42190
Job Location: Atlanta, GA
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineers (Level 3) - Atlanta, GA

Description:
STS AeroStaff Services now offers Aerospace Engineer (Level 3) jobs in Atlanta, Georgia.

Job Duties:

• Responsible for electrical systems and equipment design of complex aircraft interior and entertainment system modifications

• Perform research and surveys to determine the best methods to modify aircraft to accomplish project statements of work

• Design new electrical parts, assemblies and installations defining aircraft modifications

• Perform electrical analysis and substantiation of new parts and installations

• Produce engineering drawings, reports, material lists and work instructions to document & install aircraft modifications

• Provide engineering checks of data produced by peer groups or other project participants

• Provide technical support during manufacturing and installation of aircraft modifications

• Interface with customers, suppliers and other project stakeholders pertaining to modification projects

• Provide guidance and oversight to engineering peer group, and mentor new engineers to operate within departmental practices and procedures

• Provide statements of work, cost estimates, completion schedules and other project administrative inputs

• Practice safety-conscious behaviors in all operational processes and procedures


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 42411
Job Location: Atlanta, GA
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Propulsion Engineer ( Dulles, VA ) 8213359

Description:
Aerospace Propulsion Engineer ( Dulles, VA ) 8213359
12 Month Contract

Pay rate: Open

This opening is for a Senior Propulsion Engineer who has experience working on, designing, evaluating and analyzing liquid propulsion systems. Candidates who do not have liquid propulsion experience will not be considered. The Senior Propulsion Engineer will perform a wide range of duties associated with the specification, procurement, test, and delivery of related hardware for use on launch vehicle platforms. Candidate will be support for all aspects of product management, including resolving technical issues, scheduling of production and test activities, and working through potential conflicts with suppliers. In addition, candidate will maintain detailed records for each component type, which includes specifications, purchase orders, pedigrees, test results, key technical characteristics, and non-conformances.


The Candidate will help research, design, test, and document various hardware systems. The Candidate will gather information for desired design and processing changes from various vendors and present them to management for approval. The Candidate will be required to perform and publish analyses and waivers, by applying sound engineering principles and techniques. The Candidate will plan engineering activities, such as component tests and technical analyses to ensure the product meets specified requirements.

Education & Experience Requirements:
• Candidate shall possess a Bachelors of Science Degree in Engineering, preferably in Aerospace Engineering or Mechanical Engineering.
• Minimum of five years related experience with propulsion engineering subsystems is required or equivalent combination of education and experience.
• Candidate is preferred to have experience with liquid propulsion systems.
 
Job Number: 8213359
Job Location: Dulles, VA
Rate: Open
Per Diem: Split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts & Tooling Specialist - Mesa, AZ

Description:
STS AeroStaff Services

STS AeroStaff Services is hiring Aircraft Parts & Tooling Specialists in Mesa, Arizona.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.


Job Summary:

To provide accurate tooling/ aircraft parts/ materials in a safe and efficient manner, to the Repair Station floor personnel. To maintain the stock and inventory in the designated storage area. To purchase quality goods and services for client, in compliance with cost controls, ethics, and purchasing standards.


Job Duties:

• Receives and responds to material order requisitions and purchase orders to provide and or / obtain information from vendors

• Determines best supply source by analyzing: best price & delivery method via Internet and media

• Identifies the most cost effective product or service, and economical/reliable inbound transportation method

• Identifies new vendors in order to meet required and future needs of the company

• Reviews with vendor: cost, quantity, quality, delivery deadline, and schedule of payment for materials and services

• Enters and updates material requests and new vendors in Quantum

• Obtains proper approval authorization for purchase requisition processing, and converts material requests to purchase orders upon approval

• Ensures compliance of purchase order requirements as to price, quality, quantity, delivery deadlines and compliance with client policies

• Faxes confirmation purchase order to vendors

• Monitors and updates purchase orders with any changes as necessary in database for processing by accounts payable

• Communicates with vendors & transportation companies to ensure on-time shipment/delivery

• Reports on status of critical shipments and interfaces with suppliers to expedite deliveries and resolve issues

• Maintains accurate records of: approvals, items ordered, and items received

• Coordinates return of defective or incorrect shipments

• Locates alternative sources of supplies, materials and parts

• Processes rotable inventory/on-site stock/core returns to support operational functions

• Completes Warranty Claim forms for Maintenance Mgr.’s approval; submits approved claim forms to Customer Support Dept. for processing

• As designated by management, the Agent identifies, controls, segregates, and maintains all stock and tools to a serviceable or unserviceable category for the Hangar Floor and Stock Room

• Arranges for safe and proper disposal of surplus materials

• Preserves all articles or parts, while carried in the inventory, including parts that are subject to deterioration

• Keeps stock room clean and neat

• Follows appropriate safety precautions and HAZMAT protocols concerning the handling of the stock, tooling, or shipments

• Provides indoctrination safety instructions to colleagues handling the shipments as necessary

• Locates and selects material, supplies, tools, equipment, or other articles from stored stock and issues item to technicians

• Issues items to production as needed and/or requested; delivers materials to appropriate shop area using forklifts, dollies and other devices

• Distributes to departments any miscellaneous technical information received by the stockroom

• Initiates and tracks procurement activity based on departmental requisitions including: proper entry of all stock transactions in inventory system, and performance of inventory counts from time to time to ensure accuracy of inventory records

• Prepares parts/stock usage reports for management review and action to facilitate job costing and proper asset management

• Reports shipping discrepancies and damaged parts/materials to management

• Traces shipments en-route and expedites/re-routes shipments of an urgent nature

• Prepares tooling, parts, components, etc. for shipment to vendors and customers

• Determines packaging requirements from specifications, oral instructions, or knowledge of materials to be shipped and shipping conditions

• Packs, seals, labels, and affixes postage to prepare materials for shipping, using work devices such as hand tools, power tools, and postage meter

• Builds/repairs shipping crates as required for re-shipment

• Selects appropriate routing of outbound shipments, prepares bills of lading, and maintains records of materials shipped

• The Agent may delegate duties to any qualified assistant as necessary and with management approval, but such delegation does not relieve the Agent of the overall responsibility of the position’s job duties

• Complies with company and department norms, policies, directives, and procedures

• Guarantees reliability and quality of information

• Maintains necessary internal and external contacts

• Suggests improvements to processes and procedures

• Honors and protects confidential and proprietary documents and information

• Satisfies work schedule requirements

• Additional duties may be assigned


Qualifications:

• High School diploma or equivalent

• Employees performing the same job function for a period of 3 years’ or more are considered qualified in the position, independent of the requirements referenced above and need not supply evidence regarding school diplomas etc.


Desirable:

• Bachelor Degree in Supply Chain/Logistics, Purchasing, or Aerospace

• Generally at least 3 years’ of experience in area of responsibility

• Experience in Aerospace or Aviation Shipping & Receiving, loading/unloading, handling, checking, transportation, storage and distribution of spare parts, tools, technical publications and other materials

• 2+ year’s prior work experience in Aerospace purchasing and inventory control

• English fluency

• HAZMAT knowledge

• Forklift experience

• Desired: Executive Jets/Corporate Repair Station or Military MRO prior work experience

• Assignments require thorough knowledge of all possible tasks and responsibilities

• Skills are effectively applied in accomplishing all tasks

• Shipping and receiving techniques

• Aircraft Parts and Tooling knowledge

• Aircraft Part & Supplies basic purchasing techniques & practices

• Basic office skills, internet explorer, MS Excel

• Knowledge of handling hazardous materials DOT – HAZMAT certificate, forklift training

• Valid Motor Vehicle Driver’s License

• Desirable: MS Excel, Quantum, Lotus Notes


Working Conditions/Environment/Special Requirements:

• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations.

• Ability to work flexible hours and different shifts if required

• Employees will be subject to the random drug and alcohol testing under FAA regulations


Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39384
Job Location: Mesa, AZ
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts & Tooling Specialists - Fort Lauderdale, FL

Description:
STS AeroStaff Services offers Aircraft Parts & Tooling Specialist jobs in Fort Lauderdale, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.


Job Summary:

To provide accurate tooling/ aircraft parts/ materials in a safe and efficient manner, to the Repair Station floor personnel. To maintain the stock and inventory in the designated storage area. To purchase quality goods and services for client, in compliance with client cost controls, ethics, and purchasing standards.


Job Responsibilities:

• Receives and responds to material order requisitions and purchase orders to provide and or / obtain information from vendors

• Determines best supply source by analyzing: best price & delivery method via Internet and media

• Identifies the most cost effective product or service, and economical/reliable inbound transportation method

• Identifies new vendors in order to meet required and future needs of the company

• Reviews with vendor: cost, quantity, quality, delivery deadline, and schedule of payment for materials and services

• Enters and updates material requests and new vendors in Quantum

• Obtains proper approval authorization for purchase requisition processing, and converts material requests to purchase orders upon approval

• Ensures compliance of purchase order requirements as to price, quality, quantity, delivery deadlines and compliance with client policies

• Faxes confirmation purchase order to vendors

• Monitors and updates purchase orders with any changes as necessary in database for processing by accounts payable

• Communicates with vendors & transportation companies to ensure on-time shipment/delivery

• Reports on status of critical shipments and interfaces with suppliers to expedite deliveries and resolve issues

• Maintains accurate records of: approvals, items ordered, and items received

• Coordinates return of defective or incorrect shipments

• Locates alternative sources of supplies, materials and parts

• Processes client rotable inventory/on-site stock/core returns to support operational functions

• Completes Warranty Claim forms for Maintenance Mgr.’s approval; submits approved claim forms to Customer Support Dept. for processing

• As designated by management, the Agent identifies, controls, segregates, and maintains all stock and tools to a serviceable or unserviceable category for the Hangar

• Floor and Stock Room

• Arranges for safe and proper disposal of surplus materials

• Preserves all articles or parts, while carried in the inventory, including parts that are subject to deterioration

• Keeps stock room clean and neat

• Follows appropriate client safety precautions and HAZMAT protocols concerning the handling of the stock, tooling, or shipments

• Provides indoctrination safety instructions to colleagues handling the shipments as necessary

• Locates and selects material, supplies, tools, equipment, or other articles from stored stock and issues item to technicians

• Issues items to production as needed and/or requested; delivers materials to appropriate shop area using forklifts, dollies and other devices

• Distributes to departments any miscellaneous technical information received by the stockroom

• Initiates and tracks procurement activity based on departmental requisitions including: proper entry of all stock transactions in inventory system, and performance of inventory counts from time to time to ensure accuracy of inventory records

• Prepares parts/stock usage reports for management review and action to facilitate job costing and proper asset management

• Reports shipping discrepancies and damaged parts/materials to management

• Traces shipments en-route and expedites/re-routes shipments of an urgent nature

• Prepares tooling, parts, components, etc. for shipment to vendors and customers

• Determines packaging requirements from specifications, oral instructions, or knowledge of materials to be shipped and shipping conditions

• Packs, seals, labels, and affixes postage to prepare materials for shipping, using work devices such as hand tools, power tools, and postage meter

• Builds/repairs shipping crates as required for re-shipment

• Selects appropriate routing of outbound shipments, prepares bills of lading, and maintains records of materials shipped

• The Agent may delegate duties to any qualified assistant as necessary and with management approval, but such delegation does not relieve the Agent of the overall responsibility of the position’s job duties

• Complies with company and department norms, policies, directives, and procedures

• Guarantees reliability and quality of information

• Maintains necessary internal and external contacts

• Suggests improvements to processes and procedures

• Honors and protects confidential and proprietary documents and information

• Satisfies work schedule requirements

• Additional duties may be assigned


Education:

• High School diploma or equivalent

• Employees performing the same job function for a period of 3 years’ or more are considered qualified in the position, independent of the requirements referenced above and need not supply evidence regarding school diplomas, etc.

Desirable:

• Bachelor Degree in Supply Chain/Logistics, Purchasing, or Aerospace


Experience:

• Generally at least 3 years’ of experience in area of responsibility

• Experience in Aerospace or Aviation Shipping & Receiving, loading/unloading, handling, checking, transportation, storage and distribution of spare parts, tools, technical publications and other materials

• 2+ years’ prior work experience in Aerospace purchasing and inventory control

• English fluency

• HAZMAT knowledge

• Forklift experience



Desired:

• Executive Jets/Corporate Repair Station or Military MRO prior work experience



Knowledge, Skills, & Abilities:

• Assignments require thorough knowledge of all possible tasks and responsibilities

• Skills are effectively applied in accomplishing all tasks

• Shipping and receiving techniques

• Aircraft Parts and Tooling knowledge

• Aircraft Part & Supplies basic purchasing techniques & practices

• Basic office skills, internet explorer, MS Excel

• Knowledge of handling hazardous materials DOT – HAZMAT certificate, forklift training

• Valid Motor Vehicle Driver’s License



Desirable:

• MS Excel, Quantum, Lotus Notes



Working Conditions/Environment/ Special Requirements:


• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations

• Ability to work flexible hours and different shifts if required

• Employees will be subject to the random drug and alcohol testing under FAA regulations


Benefits:

• STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38483
Job Location: Fort Lauderdale, FL
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Quality Inspectors - Melbourne, FL

Description:
STS AeroStaff Services is hiring Aircraft Quality Inspectors in Melbourne, Florida!

Job Summary:

Inspect aircraft assembly activities and products for conformance with government and company standards and specifications. Report deviations and support preventive and corrective actions analysis aiming the delivery of products and services at their highest quality to customers.


Essential Duties & Responsibilities:

• Inspects the installation and operation of aircraft parts and equipments

• Inspects work areas and practices to detect potential unsafe conditions

• Read and understand the applicable technical information from Work Instructions, Drawings, Standards and Specifications

• Use of inspection tools and test equipment applicable to the activity

• Perform necessary work registers as requested by production and quality documents

• Prepare technical reports of quality deviations for engineering analysis

• Support process of preventive and corrective actions plan analysis


Qualifications:

• H.S. Diploma or GED. Desired: A..S. degree in Aviation

• Preferred: A&P License

• Technician Role requiring basic Skills to perform most of the standard tasks within the technical area assigned to

• Generally 0-3 years of experience in area of responsibility experience as an aircraft A&P Mechanic plus two years inspection experience in a production environment

• Desired: Prior Inspector work experience with aerospace quality systems that meet FAA requirements

• Ability to read technical documents and interprets the information – metric system

• Understand procedures, acting in problem solving, suggesting improvements
safety and operating procedures for power-on aircraft

• Application and use of precision measurement instruments and test equipments.

• Team worker

• Logic thinking

• Detail oriented

• Employees will be subject to the random drug and alcohol testing under FAA regulations

• This employee is subject to an annual vision test


What We Offer:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41747
Job Location: Melbourne, FL
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automation Equipment & Tool Designer

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-03769
Job Location: Troy, MI
Rate: BOE
Per Diem: yes
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Eric Janda
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Certification Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Responsibilities will include:



  • Lead, with minimal supervision, avionic supplemental type certification (STC) projects.

  • Authoring STC certification plans, 14 CFR compliance checklists, instructions for continued airworthiness, ground test plans, flight test plans, electrical load reports, 14 CFR compliance reports, and weight/balance reports.

  • Lead the integration of aircraft avionic systems by working with the respective business unit systems engineering team and the Aircraft Certification Center (ACC) installation design team to define the aircraft level installation architecture and details required to meet the approved certification basis.

  • Identifying, documenting, and communicating significant certification risks for timely review and resolution.

  • Monitoring and reporting of aircraft installation design and substantiation data milestones and reporting status to project/program management.

  • Ensuring all aircraft certification requirements are met resulting in successful STC issuance.


 


Education:



  • 4 year STEM degree preferred, but not required


 


Requirements:



  • Thorough working knowledge of Title 14 CFR Part 23, and 25

  • Familiarity with Title 14 CFR Part 21, 43, 45, 91, 121, 135, and 183

  • Thorough understanding of commercial avionics systems

  • Experience in the preparation of certification plans, 14 CFR compliance checklists, instructions for continued airworthiness, ground test plans, flight test plans, electrical load reports, and weight/balance reports

  • Understanding of the HIRF, Lightning, and EMC aspects of avionic system certification, preferred

  • Prior or current FAA DER and/or FAA ODA UM (Systems and Equipment Electrical) experience, preferred

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13947
Job Location: Cedar Rapids, IA
Rate: 55-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Black Belt Improvement Consultants

Description:
Leading Tier 1 suppliers of machined parts and structures for the aerospace industry require Process/Product Improvement Consultants to work at a number of their sites throughout the US.

Initially this will be based in Connecticut and they are looking for experienced candidates with a track record in delivering product quality through manufacturing process improvements. For these roles you will need to be Six Sigma Black Belt qualified and have worked extensively within the aerospace industry.

Initial contract are 6 months, with a strong likelihood of extensions beyond this, with the work moving to other client sites within the US.
 
Job Number: JO0000000103
Job Location: CT
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air System Design Engineer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

The Structures Company is an AA/EOE.
 
Job Number: 213
Job Location: Greensboro, NC
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
We are recruiting for a motivated CNC Programmer for this Aerospace Company to set-up, and operate manual and CNC machines to produce tight tolerance components and tooling while reducing run times.

The ideal candidates must be motivated in the programming and setup of CNC machines in a high-mix, low-volume environment requiring quick turnaround manufacturing runs and on-the-job problem solving to ensure machine spindles are operating most of the shift.

Successful candidates will bring a broad array of skills to help grow the company and the position itself.

RESPONSIBILITIES
Model Parts in Solidworks
Program Parts in Mastercam
Defines Manufacturing Plans
Designs Tooling
Generates Set-Up Sheets
1st Run Set-Up and Part Part Validation
Assistance with First Article Inspections
Reports to the General Manager (Dotted-line to Sr. Programmer or Manufacturing Manager)
Completes Projects Accurately by Deadline
Understands the Material properties of hard and soft alloys

REQUIREMENTS
Min. 3 Years Experience with CAD (Solidworks) and CAM (Mastercam)
High Print to Part Aptitude (in understanding the complete manufacturing process, from Programming to Final Part Inspection)
Min. 3 Years Experience Operating Multi-Axis CNC and Manual Mills (Horizontal Preferred)
Productive, Turns New Programs Quickly
Fast and Efficient in Demanding Customer Environment
Ability to lift over 25 lbs
Excellent mechanical skills and aptitude
Positive, Collaborative, Industrious
Expert in Speed/Feed/Material Properties
 
Job Location: Kent, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CONTRACTS SUPERVISOR

Description:
JSG is seeking a Contracts Supervisor for one of our premier Aerospace clients in Moorpark, CA. This is a full-time permanent opportunity.



Job Summary:

The Contracts Supervisor provides oversight and guidance to the Moorpark office contract management team. The contracts team is tasked with establishing and maintaining contractual agreements that facilitate: 1) a clear understanding of commitments, 2) balancing risk between the company and the customer, 3) timely invoicing and payment, 4) positive customer relations, and 5) accurate communication with the internal organization.

Roles and Responsibilities:

The Contracts Supervisor’s main responsibilities include:

Provide oversight, leadership and development to a team of contract professionals.

Represent the Contract Administration organization with peer organizations and customers to develop plans, organize work, negotiate terms, monitor progress, and resolve problems.
Assure that all clarifications and amendments of negotiations are incorporated into the final contract.
Participate in the planning, organizing, monitoring, and assessment of the team’s work.
Direct responsibility for handling high profile contracts from cradle to grave, including but not limited to:
Review solicitation and prepare responses for proposals, bids, and contract modifications.
Analyze contracting requirements, special provisions, and terms and conditions to ensure compliance with laws, regulations, corporate policies, and business unit procedures.
Prepare and administer the necessary correspondence, negotiation memoranda, and contract documentation to ensure timely and coordinated submittals.
Prepare, organize, and maintain contract records and files documenting contract performance, compliance, and contract closeout.

Requirements and Education:

The successful candidate must have a Bachelor's degree in a business or technical discipline. Master’s degree or JD preferred.
6 or more years of contracts management experience with 1-2 years of supervisory experience in a manufacturing environment working with government and commercial aerospace and defense contracts.

Prior work experience interpreting contract requirements, terms and conditions evaluation and negotiation.
Knowledge of FAR/DFARs requirements and US Government export regulations are also desirable.
Responsible for interacting with all business segments and management.

Must be a U.S. Citizen.

Competencies:

Excellent written, verbal and presentation skills suitable for interaction with customers and various levels of management.
Efficiency, attention to detail, and a high level of accuracy.
Self-starter with strong analytical and problem-solving skills
Effective time management skills.
Capable of dealing with multiple internal and external (domestic/international) customers
Ability to Work with offsite teams.
Proficient with Microsoft office suite software.
Knowledge with IFS, SAP, Oracle or other type of ERP/MRP software.
Knowledge of FARS, DFARs, EAR and ITAR requirements a plus.
 
Job Number: 366381
Job Location: Moorpark, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Development Change Management Specialist

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• The ideal candidate will possess a working knowledge of aerospace engineering with emphasis on cabin assemblies and installations.
• Must be computer proficient to include Microsoft Suite, SmarTeam, ERP, and MES platforms.
• CATIA experience with some design background is highly desirable.

Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Principal Duties and Responsibilities:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-249
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabinetmaker II

Description:
Unique Skills:

Able to work the weekend shift.


Education and Experience Requirements:

High school diploma/GED. Basic knowledge of cabinetmaking processes, products and tools. Two (2) years experience in cabinetmaking. Experience in aerospace industry preferred. Possess a working knowledge of Gulfstream inspection and process specifications preferred.

Position Purpose:

Under general supervision, fabricates aircraft furniture and other wood-surfaced subassemblies using aircraft specifications, design and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship.
 
Job Number: 26-DAL
Job Location: Dallas, TX
Rate: 24.18
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Chris
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Change Management Specialist

Description:
Cabin Development Change Management Specialist

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-The ideal candidate will possess a working knowledge of aerospace engineering with emphasis on cabin assemblies and installations. Must be computer proficient to include Microsoft Suite, SmarTeam, ERP, and MES platforms. CATIA experience with some design background is highly desirable.

-High School Diploma/GED required
 
Job Number: 9080
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Circuit Board Designer Level 4

Description:
RESPONSIBILITIES: (Requires Active Clearance)
Designs and develops circuits used in electronic devices. Responsible for layout and component selection, device evaluation and characterization, test box design, prototype construction and checkout, and various Analog/Digital analyses. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

REQUIRED EXPERIENCE:
- Good oral, written communication and presentation skills.
- Familiarity with video system design, synchronization, image processing operations and display formats.
CIRCUIT CARD DESIGNER 11 Years +

DESIRED EXPERIENCE:
- Experience with Mentor DX designer schematic capture tool, Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
- FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired.

EDUCATION:
Accredited Bachelor's degree or higher in Electrical Engineering with a concentration in Circuit designs involving FPGA and Digital Signal Processing through relevant experience

WORK HOURS:
9/80, 1st Shift
Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 171114
Job Location: Orlando, FL
Rate: $105.00 DOE
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Jupiter, FL
Rate: $40.00 -$45.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates MUST have experience working with Manufacturing Suppliers specifically on the fabrication of Aerospace quality hardware **
** Candidates should have approximately 6 to 9 years minimum experience **


Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.
- Turbomachinery, rotating machinery, design, fabrication.


Education:
- BS Engineering or Equivalent BS degree
 
Job Number: 9320
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery CA

Description:
Job Title: Component Product Engineer (Project Engineer) III / Rotating Machinery

Number of Positions: 1

Remaining Positions: 1

Duties:







** Candidates MUST have between 6 and 9 years of experience **



** These roles will not convert to a direct hire role unless circumstances significantly change **





Keywords:

-Turbomachinery

-Rotating machinery

-Design

-Fabrication

Skills:
Required:

-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.



Desired:

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Education:
BS Engineering or Equivalent BS degree

Skills:
Required
PROJECT ENGINEERAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 06/11/2018 Hours Per Week: 40.00
Est. End Date: 12/09/2018 Hours Per Day: 8.00
Schedule Notes: Regular 5 day / 40 hours week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8136773
Job Location: Canoga Park, CA
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) III / Rotating Machinery

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract
Shift: Regular 5 day/40 hour week. OT possible.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates MUST have between 6 and 9 years of experience **
** These rolls will not convert to a direct hire role unless circumstances significantly change **

Keywords: (MUST be in resume)
-Turbomachinery
-Rotating machinery
-Design
-Fabrication

Skills:
Required:
-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.
-Experience working with the design, analysis, and operations team.
-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.


Desired:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.


Education:
- BS Engineering or Equivalent BS degree
 
Job Number: 9211
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer I/II

Description:
Component Product Engineer - Level 1 / Level 2

Location: Jupiter, FL
Pay Rate: $28/hr - $35/hr
Duration: 6 Month Contract
Shift: First
Openings: 1
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP OR DUAL PASSPORT HOLDERS**


Duties:
-Position is for a staff level Component Product Engineer for the procurement initiation process of rocket engine system interconnect hardware
-Looking for 0 to 5 years of experience.

20%: become familiar with the customer requirements for the engine and components and prepare a Purchase Performance Specification that will be included in the Purchase Order for the components.

20%: follow the request for quote process and coordinate as required with the suppliers to ensure fully compliant proposals. Conduct an analysis of the proposals to determine the best supplier based on a predetermined set of evaluation criteria.

20%: Initiate the Production Readiness Assurance (PRA) process starting with a Supplier Requirements Review (SRR) to ensure a no-surprises validation expectation. Work with the supplier to create Design Review Packages (PDR/CDR) to support hardware deliveries in early 2018.

20%: Make a determination on the suppliers process for machines and processes so that they are capable and that the process yields are in control.

10%: Make a recommendation for any design, and/or manufacturing, or assembly changes that need to be made to force the supplier process to be in control and capable.

Skills:
-Project engineering experience and/or education required.

Education:
A Bachelor's degree in an appropriate discipline and three (1) year of directly related experience, or an equivalent combination of education and experience.

Skills Required
PROJECT ENGINEER AEROSPACE
 
Job Number: 9333
Job Location: Jupiter, FL
Rate: $28/hr - $35/hr
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters

Description:
Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Duration: 6 month contract
Shift: 9/80 Schedule, OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
- The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
- The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
- The candidate will also be a key resource in the design, development and testing of new electric propulsion products.
- Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
- Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.


Skills:
Required:
- 2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
- Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).

Desired:
- Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
- Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
- Candidates should have strong technical writing and presentation skills, and should have experience working in teams.

Education:
- A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
- A Master's degree or higher in an engineering discipline or physics is preferred.
 
Job Number: 8872
Job Location: Redmond, WA
Rate: $50.00 - $53.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II (Project Engineer) – Electric Thrusters WA

Description:
8205016
Job Title: Component Product Engineer II (Project Engineer) – Electric Thrusters

Number of Positions: 1

Remaining Positions: 1

Duties:



** Candidates must have Electric Propulsion or Plasma Physics education or experience **

Seeking a motivated aerospace engineer to support our electric propulsion thrusters.
The selected candidate will help assure the success of space missions through development, qualification, and production of Hall, Arcjet, Ion, or other EP thrusters.
The candidate will demonstrate attention to detail and the highest standards of quality assurance for the production of mission critical hardware.
The candidate will also be a key resource in the design, development and testing of new electric propulsion products.

Typical duties will include assisting the program manager in manufacturing and delivering flight hardware, guiding integrated product development teams, and leading product proposals.
Additional duties will include performing technical analyses, conceptualizing new product designs, establishing system requirements and specifications, planning and conducting test and product verification activities, analyzing test data, developing new business relationships, and generating customer presentations.
Skills:
Required:

2 years of experience in propulsion, plasma devices, or mission-critical technology is required.
Must be proficient with Microsoft Office products (Word, Excel, and PowerPoint).
Desired:

Priority will be given to candidates with experience in electric propulsion including cathodes, plasma thrusters, Hall thrusters, ion thrusters and arcjets.
Priority will also be given to candidates with experience in a production environment developing and improving products and manufacturing processes.
Candidates should have strong technical writing and presentation skills, and should have experience working in teams.
Education:
A Bachelor's degree in Aerospace Engineering, Aeronautical Engineering, Astronautics, Mechanical Engineering or Physics is required.
A Master's degree or higher in an engineering discipline or physics is preferred.

Skills:
Required
PLASMAENGINEERING PHYSICSPROJECT ENGINEERAEROSPACE ELECTRICAL

State/Province: Washington
City/Town: Redmond

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8205016
Job Location: Redmond, WA
Rate: 53/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II/III

Description:
Component Product Engineer – Level 3

Location: Jupiter, FL
Pay Rate: $40/hr - $45/hr
Duration: 6 Month Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP OR DUAL PASSPORT HOLDERS**


Duties:
-Position is for a staff level Component Product Engineer for the procurement initiation process of rocket engine system interconnect hardware
-Looking for 5 to 10 years of experience.

20%: become familiar with the customer requirements for the engine and components and prepare a Purchase Performance Specification that will be included in the Purchase Order for the components.

20%: follow the request for quote process and coordinate as required with the suppliers to ensure fully compliant proposals. Conduct an analysis of the proposals to determine the best supplier based on a predetermined set of evaluation criteria.

20%: Initiate the Production Readiness Assurance (PRA) process starting with a Supplier Requirements Review (SRR) to ensure a no-surprises validation expectation. Work with the supplier to create Design Review Packages (PDR/CDR) to support hardware deliveries in early 2018.

20%: Make a determination on the suppliers process for machines and processes so that they are capable and that the process yields are in control.

10%: Make a recommendation for any design, and/or manufacturing, or assembly changes that need to be made to force the supplier process to be in control and capable.

Skills:
-Project engineering experience and/or education required.

Education:
A Bachelor's degree in an appropriate discipline and three (1) year of directly related experience, or an equivalent combination of education and experience.

Skills Required
PROJECT ENGINEER AEROSPACE
 
Job Number: 9334
Job Location: Jupiter, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer – Level 3 / Rotating Machinery FL

Description:
8253428
Job Title: Component Product Engineer – Level 3 / Rotating Machinery

Number of Positions: 2

Remaining Positions: 2

Duties:


Additional Information:

** Candidates MUST have experience working with Manufacturing Suppliers specifically on the fabrication of Aerospace quality hardware **

** Candidates should have approximately 6 to 9 years minimum experience **



-Candidates must have 6 to 9 years minimum experience working with manufacturing suppliers to fabrication aerospace quality hardware.

-Experience working with the design, analysis, and operations team.

-Ability to work effectively with the technical, business and program office team members regarding technical issues and component status.

-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.



Skills:
-Ability to provide leadership in the resolution of issues associated with the design, fabrication, schedule and procurement in order to meet program needs.

-Turbomachinery, rotating machinery, design, fabrication.

Education:
BS Engineering or Equivalent BS degree

Skills:
Required
PROJECT ENGINEERAEROSPACEFABRICATION
Additional
AEROSPACE DESIGN

Start Date: 06/25/2018 Hours Per Week: 40.00
Est. End Date: 01/27/2019 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8253428
Job Location: Jupiter, FL
Rate: 45/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Design Engineer

Description:
Position Summary:
The Composite Design Engineer will be responsible for much of the structural design and documentation required as part of the development of an entire line of FAA TSO certified composite floats. This position provides a unique opportunity to be an integral member of a team dedicated to the creation of a new manufacturing initiative.
Position Responsibilities:
1. Conceptual design and related design studies of composite structure, including: outer mold line lofting, structural layout, part break definition, bonded joint configuration, assembly methodology, design for manufacturability, and tooling approach
2. Detail structural design using CATIA CPD, including ply layout, splicing, and darting information
3. Creation of design documentation, including drawings and prototype manufacturing planning
4. Creation of technical documentation related to design. This may include reports, presentations, and analyses which document lessons learned, design decisions made, results of tests conducted, etc.
5. Assist the tooling group with design of tooling, fixtures, and jigs for composite structure
6. Work with the manufacturing team to produce prototype and production composite parts and assemblies in accordance with approved specifications
7. Other engineering tasks central to the creation of a composite float such as: loads calculations, ply shape modification and nesting, providing design support to other departments, etc.
Experience and Skills
Qualifications:
· Bachelor of Science Degree in Engineering (Aerospace, Mechanical, etc.) with experience in all stages and facets of composite structural design. New product development experience preferred
· Proficiency with CATIA V5. Autodesk Inventor experience a plus
· Experience with composite part and assembly definition. Experience with CATIA CPD strongly preferred
· Experience with composite drafting and documentation practices, including familiarity with GD&T
· Experience with design data control and product lifecycle management practices. Familiarity with Autodesk Vault a plus
· A strong understanding of the theory and practical application of composite structures in the aerospace industry
· Strong intuitive understanding of practical composite fabrication methods and material behavior
· Understanding of metallic part design and integration into composite structure
· Excellent interpersonal, presentation, and written communication skills
· Hands-on experience with composite part and bonded assembly fabrication

The Structures Company is an AA/EOE.
 
Job Number: 205
Job Location: ST Paul, MN
Duration: Permanent/Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Manufacturing Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Support manufacturing of composite aerospace components.


Work closely with operations personnel to develop manufacturing solutions and solve production issues in hand layup, secondary bonding, autoclave cure, machining, NDI, assembly, and final inspection processes.


Learn and understand requirements to determine product impacts and recommend disposition of the parts.


Work in a cross functional team to develop and implement process improvements.


 


Requirements & Qualifications:


Bachelor’s Degree in Aerospace, Mechanical, Manufacturing, Chemical Engineering or related and 10 years of applicable experience


Experience in working with aerospace specifications and drawings


Experience designing / supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment


Knowledge of root cause / corrective action processes and techniques


Functional knowledge of Process Failure Modes and Effects Analysis (PFMEA)


Functional knowledge of production control systems (SAP/Visual Mfg/etc)


Experience authoring, modifying and auditing procedures


Experience estimating, planning, and streamlining manufacturing processes


Experience using SPC to monitor and improve processes


Experience addressing manufacturing discrepancies through a formal MRB process


 


Preferred Skills and Experience:


Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience


Experience in the use of NX 10


 
Job Number: O8092956
Job Location: Clearfield, UT
Rate: 75-85
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technology Expert (Aerospace) - China

Description:
As part of the leading aerospace company in China this advanced materials and manufacturing are seeking an Senior Engineering Expert in all aspects of composite materials and structures for modern civil aircraft. Working closely with the group's design and manufacturing centres the Composites Expert is responsible for ensuring that the aircraft composite structures design can be manufactured using the latest fabrication and manufacturing techniques. Responsibilities include:

* Liaising with design department regarding the related manufacturing tools development.

* Overall composite development, establish design methods, manufacturing and test process.

* Providing expertise in composite design and manufacturing techniques

For this role you will be degree qualified and have extensive experience within the field composite fabrication and manufacture for aircraft. In addition you will have demonstrated an understanding of composite structure design & analysis and how this relates to the manufacturability of these structures. Project management abilities and knowledge of quality and continuous improvement techniques is also required.

This role will be based at the client's modern manufacturing facilities in Shanghai and will be an initial 2-3 year fixed-term employment contract comprising an attractive basic salary with medical cover and allowances for accommodation, local transport, home leave travel provided.
 
Job Number: JO0000000126
Job Location: China
Rate: to $200k
Duration: 2-3 years
Start Date: Aug 18 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
**Must be a U.S. Person for purposes of export compliance. A U.S. Person is defined as either a Green Card Holder or U.S. Citizen.**

**NEED CANDIDATES TO START IMMEDIATELY WITHIN THE NEXT 2 WEEKS!**

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 30657-1
Job Location: WA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Required Experience:



  • 5-10 years in aerospace/defense industry

  • 4 years of relevant experience in the fields of computer technology, PP, AT, or Cybersecurity

  • Experience in requirements generation, design, development, integration, and testing of systems for military applications

  • Experience with weapon systems and real-time operating systems

  • Experience leading and advising DoD customers on PP issues

  • Experience with program protection concepts, anti-tamper, cryptography, and security solutions

  • Familiarity with documentation and tools such as: DoD 8500 series, DoD 5200 series, NIST Special Publications (800-53, 800-37, etc.)

  • Active DoD Secret Security clearance with ability to obtain Top Secret clearance


 


Desired Experience and Skills:



  • DoD Top Secret clearance with current SSBI within last 5 years

  • Cyber Certifications in accordance with DoDD 8570/DoDD 8140 such as CISSP, GSLC, CEH

  • Aircraft/store integration experience


 


Education:



  • BS, Engineering or Computer Science

  • MS, Engineering or Computer Science Desired


 
Job Number: O8196950
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Software Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Required Experience:



  • 5-10 years in aerospace/defense industry

  • 4 years of relevant experience in the fields of computer processing technology, PP, AT, or Cybersecurity

  • Experience in requirements generation, design, development, integration, and testing of systems for military applications

  • Experience with weapon systems, processing timelines, and real-time operating systems

  • Experience leading and advising DoD customers on PP issues

  • Experience with program protection concepts, anti-tamper, cryptography, and security solutions

  • Familiarity with documentation and tools such as: DoD 8500 series, DoD 5200 series, NIST Special Publications (800-53, 800-37, etc.)

  • Active DoD Secret Security clearance with ability to obtain Top Secret clearance

  • Project management experience


 


Desired Experience and Skills:



  • DoD Top Secret clearance with current SSBI within last 5 years

  • Cyber Certifications in accordance with DoDD 8570/DoDD 8140 such as CISSP, GSLC, CEH

  • Aircraft/store integration experience

  • Experience briefing customer communities on PP, AT, or Cybersecurity


 


Education Required:



  • BS, Electrical Engineering or Computer Science

  • MS, Electrical Engineering or Computer Science Desired


 
Job Number: O8197317
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Review Engineering Design Documentation consisting of Drawing, Engineering Order and Parts List for consistency with company standards, drawing quality and drafting requirements. Also review 3D dataset to ensure correct design representation in the Digital Aircraft model.

Duties and Responsibilities:
• Check Drawing, Engineering Order and Parts List for adherence to company standards.
• Check 3D dataset in CATIA V5 and PLM System.
• Participate to design reviews and provide guidance to design team regarding drafting rules and dimension & tolerance requirements.
• Collaborate with Design and Integrated Product Teams to solve issues identified during the reviews; Document and communicate issues found during reviews; Consult with design team and other checkers for interpretation or drafting rules; Act as a Subject Matter Expert regarding interpretation and application of drafting rules; Provide inputs to management on major issues being identified and help develop alternatives for solutions.

Education, Work Experience, Certification and/or Licensure:
• Minimum of 10 years to a maximum of 25 years’ experience designing mechanical and / or structural parts, assemblies or installations for aircraft
• At least 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• 5 years of experience checking Aerospace Drawings.
• Detail oriented;
• BS Mechanical or Aerospace Engineering or equivalent;
• Experience with composite materials is a plus.

Knowledge, Skills and Abilities:
• Very familiar with aircraft production and assembly methods.
• Ability to address issues identified in a direct but respectful way.
• Ability to consistently apply defined criteria.
• Able to work with people with diverse corporate / design culture background;
 
Job Number: 28-021
Job Location: Greensboro, NC
Rate: up to $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Design Checker reports to the Engineering Manager the Design Checker is Responsible for checking and verifying engineering drawings and related documents to ensure accuracy, completeness, quality and use of design standards where work is of a complex nature by performing the following duties.

JOB RESPONSIBILITIES

• Verify engineering drawings to best practices and standards.
• Works with engineering personal to resolve discrepancies.
• Redline drawings in electronic format and communicates back to engineering team.
• Must be able to work independently and as a team
• Performs other related tasks as required.

• Must have a solid understanding of Microsoft offices including excel, word, and outlook.
• Must have the ability to read 3D models, drawings, and Bill of Materials
• Must have excellent communication skills
• Associate’s degree (A.A.) or equivalent from two-year college or technical school and 2-5 years of experience or seven plus years related experience and/or training

• Familiarity with NX9
• Familiarity with Teamcenter engineering
• Familiarity with aerospace standards
• Familiarity with Adobe Reader
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Manufacturing Engineer

Description:
General Summary: ( 20 openings )
The Design Manufacturing Engineer is responsible for all manufacturing aspects of the fabrication and installation of the Landing Gear and Hydraulics systems.

Duties and Responsibilities:
• Take complete ownership of assigned A/C area(s).
• Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
• Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
• Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
• Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
• Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Company Aircraft Company.

Qualifications
• B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required.
• 5 years minimum and 20 years maximum structural/ systems Mfg. Engineering experience with the fabrication, assembly, and installation of hydraulics and landing gear details and assemblies.
• Six Sigma Certification a plus.
• Experience in sheet metal fabrication a must to include hand, brake, hydro-form, hot forming, hot joggling, super plastic forming, and stretch forming.
• Experience with reading and interpreting engineering GD&T requirements required.
• Experience with reviewing and approving drawings for release.
• Experience in an IPT (Integrated Product Team) format is a plus.
Knowledge, Skills and Abilities:
• Proven ability to define small-to-large, simple-to-complex detail part fabrication, assembly, and installation tooling.
• Proven knowledge of GD&T to help ensure a full understanding if the part definition to ensure design for manufacturability.
• Proven knowledge of chemical and physical processing of metallic and composite parts including heat treating, priming, painting, anodizing, NDT, etc.
• Proven knowledge of hydraulic system manufacture, installation, and testing of but not limited to pumps, plumbing and actuators
• Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
• 3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of detail parts, assemblies, and installations.
• CATIA V5/ V6 experience is a plus.
• SAP experience is a plus.
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus.
• Ability to analyze a variety of engineering data to help determine how to meet company objectives.

HOW TO APPLY: (I will call you upon receipt of resume)
• Email resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com


ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APDME
Job Location: Greensboro, NC
Rate: $30 -$ 50.00+ p/hr
Per Diem: Sign On Bonus $1K
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Manufacturing Engineer (Landing Gear / Structures / Fabrication / Hydraulics)

Description:
General Summary: ( 20 openings )
The Design Manufacturing Engineer is responsible for all manufacturing aspects of the fabrication and installation of the Landing Gear and Hydraulics systems.

Duties and Responsibilities:
• Take complete ownership of assigned A/C area(s).
• Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
• Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
• Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
• Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
• Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Company Aircraft Company.

Qualifications
• B.S.M.E., B.S.A.E., B.S.I.E., or B.S. Mfg. Eng./ Eng. Tech. preferred, but not required.
• 5 years minimum and 20 years maximum structural/ systems Mfg. Engineering experience with the fabrication, assembly, and installation of hydraulics and landing gear details and assemblies.
• Six Sigma Certification a plus.
• Experience in sheet metal fabrication a must to include hand, brake, hydro-form, hot forming, hot joggling, super plastic forming, and stretch forming.
• Experience with reading and interpreting engineering GD&T requirements required.
• Experience with reviewing and approving drawings for release.
• Experience in an IPT (Integrated Product Team) format is a plus.
Knowledge, Skills and Abilities:
• Proven ability to define small-to-large, simple-to-complex detail part fabrication, assembly, and installation tooling.
• Proven knowledge of GD&T to help ensure a full understanding if the part definition to ensure design for manufacturability.
• Proven knowledge of chemical and physical processing of metallic and composite parts including heat treating, priming, painting, anodizing, NDT, etc.
• Proven knowledge of hydraulic system manufacture, installation, and testing of but not limited to pumps, plumbing and actuators
• Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
• 3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of detail parts, assemblies, and installations.
• CATIA V5/ V6 experience is a plus.
• SAP experience is a plus.
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus.
• Ability to analyze a variety of engineering data to help determine how to meet company objectives.

HOW TO APPLY: (I will call you upon receipt of resume)
• Email resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com


ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APDME
Job Location: Greensboro, NC
Rate: $30 -$ 50.00+ p/hr
Per Diem: Sign On Bonus $1K
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical ( EWIS )

Description:
Electrical EWIS Engineer develops electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

Electrical EWIS Engineer selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical (EWIS) Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer III - (OK)

Description:
Our Aerospace Client is seeking a engineer on a Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Unique Skills:
• Required As a Electrical Applications Engineer (TSII) at Gulfstream you will develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired
 
Job Number: 24-243
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Electrical Applications Engineer has experience with AutoCAD required. Aerospace experience required. Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.

Electrical Applications Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
JOB SUMMARY
Reporting to the Engineering Manager the Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided
JOB RESPONSIBILITIES
• Electrical Engineer applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience.

• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - GPS Systems

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


General Description:



  • Successful Senior Electrical Engineer candidate will participate in design, development, test and support of Global Positioning System (GPS) receivers and related products for the Ground Navigation market.

  • Emphasis is on ground-based and low dynamic applications for the U.S. DoD and international military customers.

  • Product examples include GPS receivers for handheld and vehicular operation as well as embedded solutions for use in other host communication equipment and ruggedized laptop computers.


 


Experience:



  • Good written and verbal communication skills are essential. It is highly desirable that the candidate has experience in GPS receiver design.

  • A digital design background with some RF experience is preferred.

  • Previous experience with low power, low cost, and high volume electronics applications is also a plus.

  • It is also desirable that the candidate has some project engineering experience as well as managing cost accounts and schedules.


 


Minimum Qualifications:



  • Position requires a Bachelor’s degree in an applicable engineering or science field.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14018
Job Location: Cedar Rapids, IA
Rate: 55-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Hardware Circuit Design

Description:


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description



  • This position focuses on circuit board designs for digital hardware in communication products.

  • We are seeking a highly motivated Senior Electrical Engineer to join the digital hardware design group within Government Systems Communication Engineering.

  • This engineer will develop digital hardware circuit boards used in high performance communication products, such as sophisticated software-defined radios and data links.

  • Primary assignments will include use and application of electrical engineering principles and techniques to design, develop, document, verify, support, and troubleshoot digital hardware of moderate to high complexity, such as multiple hardware components or mixed electrical technologies, for airborne and ground communication products.


 


Candidates must have the following skills:



  • Must possess or be eligible for obtaining a U.S. DOD Secret Clearance. U.S. Citizenship is required. Candidate selected will be subject to a government security investigation and must meet eligibility requirements.

  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline

  • Circuit board design experience including experience with schematic capture tools

  • Domain knowledge of digital electronics and experience with digital electronics design principles and techniques (e.g. Microprocessor/microcontroller, DSP, FPGA, ASIC, ADC, DAC) including experience working with lab equipment (Oscilloscopes, Analyzers, etc.).


 


Desired Experience/Skills:



  • Experience with Signal integrity and timing analysis tools such as Hyperlynx and/or Timing Designer

  • Knowledge of FPGA, ARM, and DDR memory is highly desired.

  • Knowledge in the area of high speed design practices including signal integrity is also desired.

  • Working knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay). Includes knowledge of computer hardware components (e.g., processors, memory, interfaces), and characteristics (e.g., throughput, processing architecture, timing, capacity).


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems






 
Job Number: R13927
Job Location: Cedar Rapids, IA
Rate: 50-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • Provide technical interpretation of drawings and specifications of complex products

  • Provide process input for producibility and standard work

  • Works with Design Engineers to analyze and resolve design tolerance problems. Coordinates design changes or improvements with Design Engineering and change control board

  • Evaluate failure data for trends , track and manage defects and first pass yield.

  • Provide capacity planning and utilization analysis for accurate staffing and test equipment needs

  • Eliminate/reduce test defects and improve test yields. Perform root cause analysis and take corrective action to resolve test failures.

  • Support test equipment performance and troubleshooting reliability issues

  • U se and application of standard engineering and manufacturing principles and processes

  • Develop solutions to technical problems of moderate scope and difficulty

  • Develop, implement and maintain test methods and processes in the manufacture and test of sub-assembly, module, and top level product for a moderately difficult product line

  • Determine proper test flows and sequencing for the efficient flow of product


 


Must have requirements



  • Candidate shall have a BS degree or greater in Electrical Engineering.

  • Candidate should have experience in programming C#.

  • Candidate should have production floor support experience or 3-5 years production experience

  • six-sigma/APQP training and experience desired .

  • Detailed production analysis using Matlab and/or Minitab desired.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13980
Job Location: Wilsonville, ORE
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Checker - Level 3

Description:
Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Duration: 1 year contract
Shift: 1st shift

****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****
Examines engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
- This position will support engineers in the review of design data that will comply with applicable military specifications, SAE, ANSI, ASME, and other related standards.
- This position will be responsible for reviewing drawings for formatting errors and working with the engineering team to ensure a high level of quality in the design data.
- This position will also be responsible for reviewing change documentation and its related incorporations for completeness and correctness.
- This position will help develop a set of common Design Standards that meets our Customers and Program requirements.
- This position will be expected, at times, to be involved with the drawing creation and subsequent Production review processes.

Skill/Experience/Education
Mandatory:
Must have 6+ years of experience of each of the following:
- Familiarity with SAE AS50881 and ANSI/ASME Y14.100 or related design and drafting standards - CATIA V5 experience
- Familiarity with Change Documentation process and all related requirements to this process, Microsoft office suite (Word, Excel, PowerPoint)
****MUST have an Active Secret Clearance or to have had one within the last 2 years*****

Desired:
- Teamcenter or similar PDM/PLM software tool
- Experience working in an aerospace environment with exposure to or interface with DoD customers
- AutoCAD or other 2D drafting program
 
Job Number: 8590
Job Location: Lexington, KY
Rate: $25.00 - $35.00/HR
Per Diem: Split Possible
Overtime: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 3

Description:
Equipment & Tool Designer 3

Location: Helena, MT
Duration: 5 months

Job Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications:
5+ years of experience using CATIA V5
2+ years of client Tool Design experience
GD&T Standards Training
1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications:
1+ year(s) experience using Enovia
6 months experience in fixture fabrication
Experience with hydraulic/pneumatic design

Additional Information:
Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and client PDM.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: 18-09273
Job Location: Helena, MT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: July 1
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 4 months (with possible extension)

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer
 
Job Number: 18-07634
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 4 months+
Start Date: 6/4/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 4 months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer

If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-07634
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III & IV (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE AREA.

Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling. CATIA V5

AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: ToolDesEverett
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer III (Helena, MT)

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions. Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Basic Qualifications: 5+ years of experience using CATIA V5 2+ years of Boeing Tool Design experience GD&T Standards Training 1+ year experience with CATIA V5 advanced surfacing knowledge

Desired Experience, Skills, and Qualifications: 1+ year(s) experience using Enovia 6 months experience in fixture fabrication experience with hydraulic/pneumatic design

Additional Information:

Experience with tool design, structural design, mechanical and machine design, machining fixtures, handling equip., weld assemblies. ANSI Y-14.5, ASME Y-14.5, and Boeing PDM.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: EquipToolDesMT
Job Location: Helena, MT
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 4 months Job Description: Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets. Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-07642
Job Location: Everett, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: sachin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4 Location: Everett, WA Duration: 6-7 months Description: Key Skill Needs: - Experience leading control system design projects for aerospace and/or automotive industries. - Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment. - Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers. - Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment. - Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc). - Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability. - Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners). - Systems thinking and ability to isolate issues from a variety of interlinked systems. - Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.) - Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects. - Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.) - Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment. - Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc. - Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively. Preferred Systems Experience/Knowledge: - Siemens TIA Portal - Siemens Step 7 PLC programming software - Siemens WinAC RTX - Siemens SINUMERIK 840 D SL System Maintenance and Programming - Siemens SIMOTION software - Siemens HT8 and HMI Pro software - Siemens WinCC Advance and WinCC Flexible HMI programming software - Siemens SCALANCE industrial network switches X408, X308, X208, etc... - Siemens Simatic IT software suite - Sunrise AGV software - Siemens PROFINET Primary Setup Tool - SICK Safety Scanner Configuration & Diagnostic Software (CDS) - Kepware or similar OPC software Education / Experience: Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 18-08984
Job Location: Everett, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: sachin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 4

Description:
Equipment & Tool Engineer 4

Location: Everett, WA
Duration: 6-7 months

Description:
Key Skill Needs:
- Experience leading control system design projects for aerospace and/or automotive industries.
- Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
- Experience with Programmable Logic Controllers (PLC's), numerical control units (NCU's), and motion control products and/or similar products from other major automation suppliers.
- Experience interfacing PLC's with complex electrical, pneumatic, and hydraulic equipment.
- Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
- Familiarity with building HMI's using industrial software design packages and best practices for HMI design and usability.
- Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
- Systems thinking and ability to isolate issues from a variety of interlinked systems.
- Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM's) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
- Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
- Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
- Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
- Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
- Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge:
- Siemens TIA Portal
- Siemens Step 7 PLC programming software
- Siemens WinAC RTX
- Siemens SINUMERIK 840 D SL System Maintenance and Programming
- Siemens SIMOTION software
- Siemens HT8 and HMI Pro software
- Siemens WinCC Advance and WinCC Flexible HMI programming software
- Siemens SCALANCE industrial network switches X408, X308, X208, etc...
- Siemens Simatic IT software suite
- Sunrise AGV software
- Siemens PROFINET Primary Setup Tool
- SICK Safety Scanner Configuration & Diagnostic Software (CDS)
- Kepware or similar OPC software

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 66U-Designer Engineer
 
Job Number: 18-08984
Job Location: Everett, WA
Per Diem: Split
Overtime: Yes
Duration: 6 months
Start Date: 6/23/17
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA & ASIC Design/Verification Engineer

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

  • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


    • Requirements: management

    • System/Mechanical design, modeling, analysis, and review

    • Test/verification planning, development, and execution,

    • Occasional customer interface, coordination, and communication, and

    • Coordination with manufacturing operations.



 


Qualifications:



  • Proficiency in using DOORS software for Requirements capture and management is a plus.

  • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

  • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


 


Education:



  • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems





 
Job Number: R13869
Job Location: Cedar Rapids, IA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flammability Engineer

Description:
JOB SUMMARY

Flammability Engineer reports to the Engineering Manager the Flammability Engineer responsible for review of engineering designs and development of flammability substantiation data to demonstrate compliance with regulatory and customer requirements. Specifically, this role is to support the Interior Structures Business Unit in the qualification, testing and certification of major aircraft interior commodities, and provide technical support for ongoing continued airworthiness. Role may include complex assignments such as managing several projects simultaneously in a schedule intensive environment.

JOB RESPONSIBILITIES

• Contributes to successful project completion by participating in the review of designs, regulatory/customer requirements, and qualification plans while developing substantiation data documentation to support project goals.
• Prepares flammability test drawings, test plans, test reports, and qualification documents.
• Reviews engineering design changes and prepares change-based documentation for flammability compliance.
• Candidate is required to possess a working level knowledge of fire property regulations including; 14CFR 25.853, and OEM requirements for smoke and toxicity.
• Candidate is required to possess a working level knowledge of FAA policy related to acceptable methods of compliance (MOC’s) for flammability.
• Supports fire properties testing including coordination for internal and external laboratory tests (Bunsen burner, Heat Release, Smoke Density and Toxicity).
• Work with customer design engineers, subject matter experts and FAA authorized Representatives to establish acceptable showing of compliance for flammability.
• Working knowledge of material qualification, process qualification, etc.
• Experience in material testing including ASTM standards testing.
• Knowledge of generating repair processes for MRB
• Experience in working with honeycomb structures’
• Basic knowledge and proficiency with team center (or related product data management system), including familiarity with aerospace drawing/document control systems for change management.
• Ability to work in a cross-functional manner with design, manufacturing, quality, supply chain, program management, and customer during product/data development to ensure all aspects are considered from the outset.
• Travel requirement – up to 10% both internationally and domestically.


• Bachelors degree from a four-year university or college and minimum of 3 years of experience that demonstrates:
o Knowledge of basic material characteristics, flammability of materials.
o Ability to interpret material and fabrication process specifications for non-metallic structure.
o Basic knowledge of composite manufacturing methods, vacuum forming, injection molding, composite materials, bonding, trim and finish.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
- Aerospace experience is required.
- Knowledge of Catia V5 is required.
- Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches.
- Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements.
- Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design.
- Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.
- 2D Drawing Design Preferred

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Duties & Skills



  • Be a key member of the team charged with process discovery and deployment, process control and problem resolution

  • Contributes to and sometimes leads cross-functional team activities related to transitioning developed processes into a stable production environment. 

  • Following established guides and checklists, ensure all identified requirements for successful production are addressed, completed and verified. 

  • Key team member defining technical problems and solutions in manufacturing environment. Responsible to act as liaison with design engineering on incorporating changes to the designs which improve manufacturability. 


 


Key Experience Elements



  • Experience in a Lean Manufacturing, continuous improvement environment is desirable

  • Experience in optics fabrication, optical coating and/or optical products assembly and test is desirable.

  • Experience in assembly and test procedure, product configuration and documentation is desirable. 

  • Demonstrated skills in statistical process control and statistical analysis for manufacturing is desirable.

  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline and identified skills and experience are required. 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14050
Job Location: Carlsbad, CA
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Install Tech II

Description:
Unique Skills:

Able to work the weekend shift.


Education and Experience Requirements:

High school diploma/GED. Two (2) years of applicable installation, fabrication or related experience. Experience in aerospace industry preferred.

Position Purpose:

The Interior Installation Technician II works under general supervision to remove, install, and/or fabricate aircraft interiors, which may include items such as trim, carpet, sound proofing, light structure, cabinetry, panels and other accessories. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.
 
Job Number: 25-DAL
Job Location: Dallas, TX
Rate: 24.18
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Chris
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
JAVA Software Engineer (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Rockwell Collins is currently seeking qualified candidates for a JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 3 years of hands on coding in Java using industry standard Object Oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Experience designing, configuring and developing complex system architectures using Virtual Machines (VMs), going beyond just setting up or doing application development on VMs

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents).

  • Understanding of Network Management fundamentals

  • Working knowledge of scripting languages such as Perl, bash, etc

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13943
Job Location: Richardson, TX
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Java Engineer - Military Platforms (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • Our expertise in flight deck avionics, cabin electronics, mission communications, information management, and simulation and training is strengthened by our global service and support network that spans 27 countries.

  • Working together, our global team of 20,000 employees shares a vision to create the most trusted source of communication and aviation electronics solutions, applying both insight and foresight to help our customers succeed. We are currently seeking qualified candidates for a Senior JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 5 years of hands on coding in Java using industry standard object oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Familiarity with virtual machine environments and their usage in complex system architectures

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Experience with setup/configuration of virtual machine environments (such as VmWare or equivalents)

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents)

  • Experience with Ethernet-based interfaces/protocols (IPv6 and SIP), serial interfaces, etc.

  • Understanding of Network Management fundamentals

  • Experience using SNMPv3 to monitor/control equipment

  • Working knowledge of scripting languages such as Perl, bash, etc.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14003
Job Location: Richardson, TX
Rate: 75-85
Per Diem: Yes, Split
Overtime: Some
Duration: 16 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 with active secret CA

Description:
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2


Duties:

Additional Information: CANDIDATES NEEDED! Manager is active. Active Secret clearance required or active within last 2 years.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years **



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEERAEROSPACEACTIVE SECRET CLEARANCE

State/Province: California
City/Town: Canoga Park

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386
Job Location: Canoga Park, CA
Rate: 50-66/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Engineer 3 / Ability to obtain Secret Clearance CA

Description:
1642
Logistics Engineer 3 (Job Number: 18006742)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: May 28, 2018

Target End Date: May 24, 2019

Pay Rate: $42/hr

Work Schedule: 9/80

Location: Redondo Beach, Ca

Duration of Assignment: 1 year

Clearance: Ability to obtain Secret


Responsible for the technical coordination, planning, execution, and management of NGAS-derived support and deliverables within the broader F-35 Maintenance, Repair, Overhaul and Upgrade (MRO&U) competency. Position involves significant collaboration with engineering, supply, operations, program office and customer stakeholders to conceptualize, develop, mature and brief/solicit government approvals of comprehensive retrofit projects. Develops corresponding Basis of Estimate documentation conveying technical scope and rationale for NGAS deliverables and labor projections. Support and review modification engineering, Time Compliance Technical Directive (TCTD) manuscripts and provide virtual support for associated verification events. Candidate may be required to routinely work extended hours and weekends to meet program objectives. Lead modification tools and tooling development activities and coordinate for related inspections, fielding and engineering support. Must possess excellent interpersonal, written and oral communication skills and experienced leveraging Microsoft Office suite applications. Position involves a wide range of influence and requires a resourceful, independent self-starter able to analyze and solve complex technical and logistical challenges involving solicitations of and commitments from various stakeholders.


Basic Qualifications:

• Bachelor of Science degree from an accredited college in Aerospace Engineering, Mechanical Engineering, or related field of study is required
• 5 years of experience related to aircraft modification, maintenance and related logistical operations.
• Prior aircraft tooling development, verification and utilization experience.
• Applicant must be proficient in Windows, MS Word, Excel, Access and Power Point
• Verbal, writing, presentation, and leadership skills are essential.
• Ability to obtain a Secret clearance
• US Citizenship

Preferred Qualifications

• Understanding of Project Management fundamentals
• Familiarity with F-35 air vehicles a plus
• Current Active Secret Clearance
 
Job Number: MB-1642
Job Location: Redondo Beach, CA
Rate: 42/hr max
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL DESIGN ENGINEER

Description:
Johnson Service Group is looking for a Mechanical Design Engineer.

Candidate should be a mechanical design engineer with aerospace background or good mechanism experience.
Solidworks experience is required.
Candidate should understand technical requirements, able to develop design concepts that could meet the requirements, use basic calculations or design practices to verify that they are met, model/document the design fully, and assist in the integration and/or testing of the design.
 
Job Number: 365812
Job Location: Pasadena, CA.
Per Diem: If qualified
Overtime: Possible
Duration: 12+months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER (with Aerospace experience)

Description:
This position will support mechanical analysis projects supporting aircraft weapon system programs. Specifically, the engineer will provide analyses, planning and draft documentation to address mechanical, electrical or avionics systems safety, suitability, and effectiveness requirements. The engineer will perform Failure Mode and Effects Analysis, Subsystem Hazard Analysis, engineering and configuration analysis, and develop engineering technical requirements for aircraft mechanical, electrical or avionics system components. Tasks include but are not limited to engineering evaluation, analysis, and recommended disposition of technical assistance requests for aircraft mechanical, electrical or avionics systems. The engineer will use SolidWorks or other CAD programs to create 3D models of aircraft mechanical, electrical or avionics components. The engineer will develop and manage large MS Excel spreadsheets. The engineer will write technical reports detailing analyses in MS Word as well as Adobe Pro. This position may be tasked to support similar duties on various other USAF weapon systems.
Required Skills & Experience
Bachelor’s Degree in a Mechanical or Aerospace Engineering discipline from an accredited University with six (6) years of experience.

Preferred Qualifications:
Master’s Degree in Engineering
Experience working on aircraft (Civilian/Military) mechanical, electrical, or avionics systems

Desired Skills & Experience
The ideal candidate will have:
Aircraft systems experience
Knowledge of finite element analysis techniques and SolidWorks or AutoCAD
Ability to interpret failure data from multiple DOD maintenance databases
Develop and manage large MS Excel Spreadsheets
Coordinate with other technical personnel in solving technical problems, gathering information, cost estimates and specifications
Compile and prepare comprehensive technical report
Work in a team environment and possess good communication skills, both written and oral
Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: KM0015
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: No
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
Working knowledge and experience integrating various mechanical systems into a composite aircraft.
Familiarity with composite fabrication processes
Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
Skilled in “equivalent strength” principles
Participation in product Corrective Action Board (CAR) reviews

Requirements
B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
At least 5 years of relevant industry experience
Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Composite and metal design experience preferred
Understanding of MRB requirements & procedures
Extensive working knowledge of engineering drawings / requirements
NDT/Visual non-conformance disposition expertise
Experience with control & segregation requirements for non-conforming material
Familiarization with records accuracy & completeness (including data codes)
Ability to facilitate inadequate cause & corrective action resolutions
Familiarization with rework vs accept disposition risk assessments
Familiarization with final dispositions & re-submit codes
Experience should include creation of engineering dispositions for non-conformances for pressurized and non
pressurized metallic and non-metallic structures (fuselage, wing, empennage)
Experience should be in a production and/or schedule-driven environment
Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
Strong written/verbal communication and interpersonal skills
Typically a 9-10 hour work day, with some scheduled weekend support required

ITAR Requirements
To conform to U.S. Government export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company is an AA/EOE.
 
Job Number: 191
Job Location: Mojave, CA
Rate: $65.00
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Responsibilities include but are not limited to the following: 



  • Develop tooling and machine design concepts and support Tool and Machine Design Engineers in creating 3D models and drawings in TcUA (Product lifecycle management system) 

  • Insure models and drawings meet all department standards and customer requirements. 

  • Present models and drawings in design reviews to ensure safety, quality, delivery, cost objectives and customer satisfaction with design from all team members. 

  • Manage multiple projects and customers while creating efficient designs to meet the program cost and schedule requirements. 

  • Work with internal customers to concept needed support equipment for new and existing programs. 

  • Work closely with Tool and Machine Design Engineers to create final drawings and meet design costs and schedules. 


 


Requirements: 



  • 4 year BS Design and Drafting or equivalent experience 

  • Working knowledge of GD&T. 

  • Familiar with machine design and aircraft tooling. 

  • Experience with model checking for accuracy and model integrity. 

  • Experience with creating drawings. 

  • CATIA V5, TcUA, NX or other 3D modeling software a plus. 


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O6820283
Job Location: Clearfield, UT
Rate: 40-50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing & Industrial Engineers (Aerospace - All locations WA)

Description:
Our Aerospace Client has openings for Manufacturing & Industrial Engineers:

Everett, WA - Hiring NOW
Seattle, WA
Auburn, WA
Renton, WA

Other surrounding areas.

Note: Job Description is fairly genetic.
Looking for Manufacturing Engineers/Industrial

Prefer Aerospace - Consider other.

HOW TO APPLY:
Email resume in MS WORD DOC to: Albert.Peniche@Yoh.com
Include Month & Day Birth.

DO NOT SEND IN PDF FORMAT.

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APMFGIE
Job Location: Everett, WA
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / CNC Programmer

Description:
CLIENT designs, engineers, manufactures, repairs and overhauls a broad portfolio of aviation and industrial components, accessories, subassemblies, systems and aircraft structures. We partner with original equipment manufacturers (OEMs) and operators of commercial, regional, business and military aircraft worldwide, to provide products and services that solve their hardest problems. So, whatever the part, component or complexity of assembly, Triumph is committed to quality, service and meeting the specialized needs of each customer.

Client participates at all levels of the aerospace supply chain – from single components, to complex systems, to aerospace structures and their contents. We provide solutions for the entire product life cycle of an aircraft – from raw material to aftermarket service. Our unique ability to integrate a broad range of products and capabilities is our competitive advantage. We are looking for a Manufacturing Engineer/CNC Programmer with the following qualifications to perform noted functions.

Responsibilities:
• Responsible for creating complex 5-Axis programs for aerospace housings and covers using MasterCAM
• Responsible for specifying/determining the most efficient cutting tools for all features being machined
• Designing tools and fixtures using Pro-E/Creo
• Supporting shop floor production.
• Required to perform as business needs dictate other tasks including but not limited to auditing processes, inspecting hardware, travel, and participate in continuous improvement activities

Qualifications:
• Associates degree in Manufacturing Technologies
• Three years’ experience (must be recent) programming 3, 4 and 5-Axis machining centers and jig borers using MasterCAM.
• Three years 3D modeling experience with Pro Engineer/Creo
• Must have strong cutting tool knowledge, Vericut experience a plus.
• Strong analytical skills
• Excellent communication skills
• Familiarity with basic aerospace measuring tools
• Working knowledge of GD&T and part detailing
• Basic Computer Skills: proficient with Microsoft Word & Excel etc.
• Capable of effectively reading blueprints, specifications and manufacturing orders
• Experience creating detailed step by step work instructions and sketches for the manufacture of complex aluminum, magnesium and titanium housings and covers, a plus.
 
Job Number: 15197
Job Location: salt lake city, UT
Rate: open
Per Diem: direct hire
Duration: full time
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 3 / no clearance CA

Description:
162028/18010931
Job Title: Manufacturing Engineer 3

Work Site : 16765 W Bernardo Dr, San Diego, CA 92127
Job Number: 1659
Max Pay Rate: 55.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract


Job Summary
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

Job Description

Qualifications and Education Requirements
•Minimum 5 Years of experience in a Manufacturing Engineer capacity with a Bachelors in Science in Engineering or STEM; 3 Years of experience with a Masters in Engineering; 0 Years with PHD.
•Must be Flexible working different shifts if necessary.
•Must be open to work overtime as needed.

Preferred Skills
•Previous Aerospace & Defense experience a Plus
•Previous UAV experience a Plus
 
Job Number: MB-1659
Job Location: San Diego, CA
Rate: 55/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Process Engineer (Aircraft) - China

Description:
As part of this leading Chinese aerospace organisation this aircraft manufacturing facility are seeking an experienced Manufacturing Process Engineer to be responsible for the development of advanced manufacturing systems and processes (including tooling) for a modern aircraft production line. Responsibilities will include:

* Organise and formulate product manufacturing solutions, lean manufacturing models and product manufacturing
* Establishment of process equipment design (including systems maintenance requirements)
* Responsibility for quality, cost and efficiency of process/tooling products
* Using industry knowledge to provide advanced process design and tooling solutions.

You will be degree qualified, with extensive experience within an aircraft production environment in a senior Manufacturing Process Engineer role. This will include knowledge of aircraft structure assembly (encompassing process/tooling production line planning) and knowledge of the relevant international aircraft and quality standards. Strong leadership skills and a proven ability to design and implement new aircraft manufacturing facilities is also required.

This role will be based at the client's modern manufacturing facilities in Shanghai and will be an initial 2-3 year fixed-term employment contract comprising an attractive basic salary with medical cover and allowances for accommodation, local transport, home leave travel provided.
 
Job Number: JO0000000127
Job Location: China
Rate: to S200k
Duration: 2-3 years
Start Date: Aug 18 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 327
Job Location: Mojave, CA
Rate: $70-$75/hr. DOE
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
PRIMARY RESPONSIBILITIES INCLUDE:
Provide mass properties engineering in accordance with industry standards and Society of Allied Weight Engineers (SAWE) best practices. Analyze mass properties impacts of internal and external modifications, and impacts to systems and subsystems. Analyze and account for changes in mass properties throughout program lifecycle.
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and integrate with OEM data for input to structural loads models. Manage subcontractor efforts related to mass properties including vendor weight control. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews to both internal and external customers.
Generate FAA and DoD mass properties documentation meeting requirements of airworthiness certification including weight and balance manuals, supplements, and equipment lists.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
Requires a BS in Related Field.

Sr. Mass Properties Engineer with 10+ Years of experience
Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (Solidworks preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Must be a problem solver capable of working alone or with a technical team in a fast paced environment.

Note: Ability to obtain/maintain a security clearance may is required.

The Structures Company is an AA/EOE.
 
Job Number: 196
Job Location: CO
Rate: $55-$63/Hr., DOE
Per Diem: Yes
Overtime: Yes
Duration: 6+ Months
Start Date: May 2018
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials & Processes Engineer

Description:
 SUMMARY OF POSITION:

 

The Materials & Processes Engineering Specialist is responsible to ensure product integrity during design, manufacturing, repair, and aftermarket service.

 

 

SUMMARY OF DUTIES

 

• Evaluate, qualify, approve and specify all M&P used on landing gear design components.

• Technically support manufacturing operations related to M&P: specifications, procedures, manufacturing plans, process techniques, deviations, substitutions, repair, MRB dispositions, certifications, corrective action, operator training certification, internal and external audits, efficiency and cost reduction projects.

• Act as a delegated M&PE approved by customer for all manufactured designated parts: manufacturing plan and process technique approval, as applicable.

• Represent the company as an active M&P member and subscriber within the Nadcap councils: meeting, task groups, internal processes and external process supplier accreditation.

• High level of responsibility: Must be able to operate independently. Must be able to make sound engineering decisions.


 

 

 

QUALIFICATION:

 

• Bachelor degree in materials or metallurgical engineering.

• Minimum of Four (4) years in the metallurgical industry, preferably in aerospace.

• Expertise in landing gear materials and processes related, such as high strength steel, aluminum and titanium alloys, heat treating, plating, peening, forging, casting and NDT processes.

• Practical experience with metallurgical laboratory testing



PROFILE:

• Dynamic, autonomous and is equipped with thorough analytical capabilities, she/he is interested in resolving complex technical problems. Welcomes teamwork and supports the internal and external customers.

• Able to work on many issues at the same time with the sense of priority.

• Good skill to write technical report and communicate

• Low level of supervision: She/he maintains the department head up-to-date with major issues in the field of M&PE.

• Available to travel between local sites and outside of country when necessary.


 
Job Number: 18-15582
Job Location: Strongsville, OH
Rate: 95000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-18 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Terri Beckett
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
US Citizenship is required

Description/Comment:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electro-mechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional Job Details:
Familiarity with aerospace design practices including designing for light weight design and random vibration environments; working knowledge of geometric dimensioning and tolerance analysis; modeling and drawing creation in Creo/Pro-Engineer. Experience with internal designed hardware on the EMU,ESOC and Space Station programs is a plus.

Education:
Bachelor's Degree


Hema Murali
Senior Technical Recruiter
Apollo Professional Solutions, Inc.
hmurali@apollopros.com
Tel: 860-254-6337
 
Job Location: Windsor Locks, CT
Rate: 48
Per Diem: Yes
Overtime: N/A
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Hema
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split: NO

**Must be a U.S. Citizen**
**Must have a Bachelor's Degree**

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Familiarity with aerospace design practices including designing for light weight design and random vibration environments.
- Working knowledge of geometric dimensioning and tolerance analysis.
- Modeling and drawing creation in Creo/Pro-Engineer.
- Experience with Company designed hardware on the EMU, ESOC and Space Station programs is a plus.

Education:
- Bachelor's Degree
- 5+ years of experience
 
Job Number: 9308
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Responsibilities



  • Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable

  • Perform autonomously under the direction of team leaders, program management and engineering management

  • Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach

  • Contribute to schedule creation and ensure schedule commitments are met

  • Create and present program and/or task status presentations to team members and engineering management

  • Create and present clear and concise technical descriptions to engineering leadership and customers

  • Mentor junior engineers and provide guidance to design manufacturing team members

  • Provide input to design and document reviews

  • Spearhead investigations for open ended complex problems

  • Develop detailed hardware requirements based on product theory, system level requirements and customer requirements

  • Complete designs that meet documented hardware requirements

  • Create test procedures to support the testing of products to industry and government standards

  • Review hardware defects and identify systemic root causes and process improvements


 


Basic Qualifications



  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering

  • US Citizenship or Permanent Resident (Green Card) required

  • Experience in mechanical engineering design and development

  • Knowledge of engineering materials and processes

  • Experience with structural and thermal management design

  • Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)

  • Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles

  • Strong technical, analytical and problem solving skills

  • Ability to effectively communicate throughout all levels of the organization


 


Additional skills or experience a plus:



  • Packaging of electronic and/or precision optical systems

  • Design of manufacturing, calibration and test support equipment

  • Aluminum fabrication techniques including: machining & investment casting

  • Experience in avionics or aerospace industry

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14060
Job Location: Wilsonville, ORE
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
From the Hiring Manager:

*** Looking for a Mechanical Engineer who has prior hands-on mechanical design experience along with the working knowledge / understanding of the assembly / fabrication process
*** SolidWorks is a must; should have Production / Manufacturing experience working for government customers (Defense, Military, etc). Not someone with all Aerospace experience

Summary:

The Mechanical Engineer will assist in the creation of proposals for technical solutions to government customer solicitations by researching, brainstorming and developing new mechanical design solutions. The projects will require solutions that ensure functionality, quality, reliability, cost and manufacturing capability for a range of specifications. The Mechanical Engineer will create and maintain the project specifications and develop the design and other aspects of the project plan including schedule, resources and costs.

Responsibilities:

> Design and analyses of technical development projects, mechanical systems with multiple moving parts
> Define project specs and project plans
> Work with manufacturing processes / systems and the ability to translate this knowledge into design direction for new designs and existing product improvements;
> Independently create structural analyses of machinery and small scale architectural assemblies
> Work with structural analysis tools, both manual calculations and automated software approaches (Finite Element Analysis (FEAs))
> Work with weldments and/or welded structures
> Exhibit fluency in parts/assemblies and have an understanding of, and experience with, MIL-STD-810 environmental requirements and resulting design issues
> Product validation and durability testing
> Initiate and lead cross functional team meetings and design reviews to complete mechanical design (concept through launch)
> Apply DFM/DFA principles to the mechanical design and creating multiple concepts, thoroughly evaluating each, and presenting them for design reviews by peers.

Requirements:

> Bachelors/Masters in Mechanical Engineering & 5 – 10+ years in mechanical project engineering experience
> Proficient in Solid Works and ASME Y14.100
> Experience in Research & Development for government customers (preferred)
 
Job Number: 025_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: Perm Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Electro/Mechanical Testing

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Mechanical Engineer is responsible for overseeing the development and implementation of complex test equipment solutions, hardware and software, for use in testing Electro-mechanical Systems and Cabin Systems products in support of Engineering, Operations, Service locations and airline customers.

  • The Mechanical Engineer will take direction from the Test Equipment Senior Engineering Manager to complete test equipment bids, define requirements, development activities, integration, validation, documentation, project execution and Test Engineering supporting efforts. 


 


RESPONSIBILITIES INCLUDE: 



  • Lead the development of test equipment hardware and software for testing both new and legacy products. This includes Planning, design, integrate, verification, validation, and documentation activities for relatively simple to moderately difficult test solutions for both new and legacy products.

  • Develop test solutions bids by providing accurate cost and schedule estimates along with technical descriptions of proposed test solutions.

  • Follow Life Cycle Test Strategy Development guidelines to provide cost effective test solutions utilizing modularity and reuse whenever possible.

  • Perform concurrent test development with product development by coordinating with product development teams to direct design for testability, documenting test requirements, and generating test procedures for final product acceptance.

  • Work with Operations and Engineering to develop test solutions required for Qualification and Acceptance testing, and ESS/HASS/HALT testing the product in accordance with manufacturing test plans. 

  • Provide prompt test equipment support for legacy systems for Operations, Service locations and Product Support to minimize product stop shipments.

  • Support outsourcing efforts per ARINC-625 test equipment development outsourcing standard along with Rockwell Collins policies and procedures.


 


EXPERIENCE REQUIRED: 



  • Must be capable of requirements generation, development, design, and drafting of complex test equipment utilized for testing of electromechanical aerospace products including; flap actuation systems, Horizontal Trim Stabilizer Actuators (HSTA's), and Pilot Controls Systems. Candidate should be experience with product testing which includes manufacturing assembly and test, Endurance and Fatigue testing based on customer requirements. Must have in-depth understanding of both MIL-STD-810 (military) and RTCA/DO-160 (commercial) specifications and ARINC 625-2 (Test Equipment Development). 

  • Must have an in-depth understanding of following principals and equipment: Kinematics, metallurgic properties, stress and structural analysis, RVDT's, LVDT's, load cells, load cell amplifiers, Programmable Logic Controllers (PLC's), DC Brushless Motors/ Controllers and National Instruments data control/acquisition hardware and associate software. 

  • Must have experience using electrical, mechanical and hydraulic test measurement equipment, Ansys 4.5, Unigraphics NX6, Autocad, and Solid Works Mechanical Design software and desktop PC applications programs including MS Word, Excel, Power Point, Visio and MS Project. Additionally, experience in programming while using National Instruments Labview for Windows, C, C++, C# programming is a plus.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14044
Job Location: Irvine, CA
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Electro/Mechanical Testing

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Mechanical Engineer is responsible for overseeing the development and implementation of complex test equipment solutions, hardware and software, for use in testing Electro-mechanical Systems and Cabin Systems products in support of Engineering, Operations, Service locations and airline customers.

  • The Mechanical Engineer will take direction from the Test Equipment Senior Engineering Manager to complete test equipment bids, define requirements, development activities, integration, validation, documentation, project execution and Test Engineering supporting efforts. 


 


RESPONSIBILITIES INCLUDE: 



  • Lead the development of test equipment hardware and software for testing both new and legacy products. This includes Planning, design, integrate, verification, validation, and documentation activities for relatively simple to moderately difficult test solutions for both new and legacy products.

  • Develop test solutions bids by providing accurate cost and schedule estimates along with technical descriptions of proposed test solutions.

  • Follow Life Cycle Test Strategy Development guidelines to provide cost effective test solutions utilizing modularity and reuse whenever possible.

  • Support outsourcing efforts per ARINC-625 test equipment development outsourcing standard


 


EXPERIENCE REQUIRED: 



  • Must be capable of requirements generation, development, design, and drafting of complex test equipment utilized for testing of electro-mechanical aerospace products including; flap actuation systems, Horizontal Trim Stabilizer Actuators (HSTA's), and Pilot Controls Systems. Candidate should be experience with product testing which includes manufacturing assembly and test, Endurance and Fatigue testing based on customer requirements. Must have in-depth understanding of both MIL-STD-810 (military) and RTCA/DO-160 (commercial) specifications and ARINC 625-2 (Test Equipment Development). 

  • Must have an in-depth understanding of following principals and equipment: Kinematics, metallurgic properties, stress and structural analysis, RVDT's, LVDT's, load cells, load cell amplifiers, Programmable Logic Controllers (PLC's), DC Brushless Motors/ Controllers and National Instruments data control/acquisition hardware and associate software. 

  • Must have experience using electrical, mechanical and hydraulic test measurement equipment, Ansys 4.5, Unigraphics NX6, Autocad, and Solid Works Mechanical Design software and desktop PC applications programs including MS Word, Excel, Power Point, Visio and MS Project. Additionally, experience in programming while using National Instruments Labview for Windows, C, C++, C# programming is a plus.

  • Must be able to read and interpret mechanical assembly drawings and hydraulic, mechanical and electrical schematics.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14043
Job Location: Irvine, CA
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer IV ( Clearfield, UT ) S8092963

Description:
Mechanical Engineer IV ( Clearfield, UT ) S8092963
12 Month Contract

Pay rate: Open

MECHANICAL ENGINEER - IV - Composites
Top three skills:
• Active Secret DoD Clearance within 4 ½ years of last investigation
• Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience
• Experience in the use of NX 10

Support manufacturing of composite aerospace components. Work closely with operations personnel to develop manufacturing solutions and solve production issues in hand layup, secondary bonding, autoclave cure, machining, NDI, assembly, and final inspection processes. Learn and understand requirements to determine product impacts and recommend disposition of the parts. Work in a cross functional team to develop and implement process improvements.

Requirements & Qualifications:

• Active Secret DoD Clearance within 4½ years of last investigation
• Bachelor’s Degree in Aerospace, Mechanical, Manufacturing, Chemical Engineering or related and 10 years of applicable experience
 
Job Number: S8092963
Job Location: Clearfield, UT
Rate: open
Per Diem: split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems - Ground Support Equipment (GSE) Engineer

Description:
This experienced, hands‐on Mechanical Systems Engineer will coordinate mechanical systems engineering efforts related to the flight testing, operational implementation, documentation, FAA Part 400 licensing, modifications management and issues resolution of air vehicles and GSE (ground support equipment). Qualified candidates should have a strong technical background in aerospace or aviation mechanical systems and flight controls, as well as composite structures and/or aviation/aerospace ground support equipment. In any of these roles the person in this position may be asked to provide day to day direction to operations technicians.


Description
Oversee and manage the development, implementation, testing, and integration of air vehicles for mechanical systems, to include Flight Control Systems, Landing Gear, Brakes, and GSE.
Work closely with maintenance management and engineering to maintain vehicle/GSE functionality and to improve systems, processes, and operations for the air vehicle mechanical systems.
Coordinate the engineering activities between the various engineering specialties within the product team.
Track, manage and mitigate the mechanical systems engineering risks.
Ensure all customer product requirements are met.
Conduct tests and/or missions support from the Mission Control Center for mechanical systems as required.
General duties include:
· Coordinate and/or integrate with systems engineers and counterpart designers on modifications and/or design change proposals for the air vehicle systems.
· Review and propose concepts for redesign recommendations based on operational experience, reliability, maintainability, etc. on the air vehicle systems.
· Review and approve technical publications. Propose modifications where appropriate. Includes:
o Review and approve repair manuals for mechanical systems. May author portions as appropriate.
o Approve and/or review disposition for component removals and replacements.
o Author and/or approve mechanical system anomaly troubleshooting dispositions.
o Author and/or approve mechanical systems Work Instructions/Engineering Reports.
· Develop and remain technical authority for assigned Flight Rules, Launch Commit Criteria, and Required Equipment List (REL) items, and how they interact with the air vehicle systems.
· Manage and implement process to make real-time decisions and/or issue waivers to hazard reports, flight rules, launch commit criteria, and REL items for the air vehicle systems.
· Provide mission control room systems engineering support in real time during the mission to monitor systems performance and recommend corrective actions on issues.
· Coordinate post flight data analysis functions, including continued development of system health monitoring and reliability data for more established systems
· Integrate analysis of tear down and failure reports for failed vendor components (if available)
· Communicate reliability data/recommendations back to designers.
Bachelor’s degree in Aerospace or Mechanical Engineering, with 1+ years relevant industry experience
Successful aviation/aerospace project engineering management experience, is desired but not required
Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
1+ Experience with aviation mechanical/flight control systems, pneumatic systems, design or operations desired
Excellent analytical and problem-solving skills with high attention to detail
Ground and flight testing experience of new aircraft systems is desirable
Excellent verbal and written communication skills
Excellent interpersonal and customer service skills
Strong IT skills, including Excel and Product Lifecycle Management (PLM) tools. Computer Aided Design (CAD) experience is desirable
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 215
Job Location: Mojave, CA
Rate: $55-$70/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Aerospace mechanical systems engineer with experience in mechanical system design and manufacturing. The primary task of this role will be to do detailed design and systems layout work for vehicle integration. Additionally, the engineer in this role will be required to interface with structural analysis, manufacturing and maintenance teams.
Helps develop and refine requirements for the mechanical systems based on customer requirements
Evaluates data from the prototype program for verification and validation purposes and identifies further testing or development work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies
Establishes manufacturing tolerances for production of components using GD&T
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify manufacturing processes meet design intent and requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes
Requirements
Bachelor’s degree in Mechanical or Aerospace Engineering from an accredited institution
Experience with CATIA V5
Experience in aerospace mechanical system design, assembly and test processes
Minimum of 5+ years relevant industry experience
Experience with Model Based Definition, GD&T skills through experience and/or formal training
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Experience with manufacturing based ERP systems a plus
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 194
Job Location: Mojave, CA
Rate: Up to $65.00-DOE
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanism Design Engineer - Catia v5

Description:
Seeking an experienced Mechanisms Design Engineer focused on design, performance, manufacturing coordination, and installation integration of mechanism designs. The initial opportunity is related to interior seats, but there are many other opportunities to follow.

Responsibilities:

• Capable of creating design requirements, validating them, and decomposing them into an integrated verification plan for compliance/certification.
• Contribute to conceptual and preliminary design trades of varying complexity and document results of work
• Develop parametric CATIA V5 models that can be used to refine final mechanical designs
• Capable of interpreting engineering schematics to drive detail designs
• Works closely with prototype shop as well as production shop personnel to optimize design concepts
• Able to work closely with Industrial Design Engineers to integrate aesthetic and creative design requirements into design
• Supports the review of production planning and procedures to ensure compliance with design requirements
• Contributes to the creation of test plans in order to verify design intent, requirements and functionality
• Working knowledge of industry best practices; including design specifications (commercial and DOD), regulatory guidance (FAA AC), and aerospace recommended practices
• Expected to present work and technical findings to management and senior leadership through design reviews and program milestones where appropriate

Qualifications:

• BS in Mechanical/Aerospace Engineering or relevant engineering discipline
• 6+ years of experience in preliminary design, performance and/or integration of mechanical installations
• Experience with CATIA V5 and the CATIA kinematics tools
• Experience with Product Lifecycle Management tools
• Willingness to adapt and cross-train
• Strong team player with quality organization and pragmatic problem solving skills
• Expected to work independently as well with supervision given general guidance
• Experience with flight vehicles or vehicle systems certification to commercial standards (14 CFR Part 23 or 25) and/or military/government standards (DOD or NASA) is preferred

The Structures Company is an AA/EOE.
 
Job Number: 202
Job Location: Mojave, CA
Rate: $65-70/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Missile Controls Engineer (Secret Engineer)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Manager Notes:



  • Team is significantly understaffed w/ new business continuing to flow in.

  • NOT looking for space/satellite exp.

  • Need Defense, specifically MISSILE exp. (timing for space is minutes, hours, days.. timing for missiles is fractions of a sec.)


 


Overview



  • Seeking a GNC engineer to lead development of an autopilot for an air-launched (eject) tail-controlled supersonic tactical missile and guide the work performed by more junior engineers.


 


Requirements



  • 20+ years of experience in controls on air vehicles.

  • Active SECRET Clearance Required.


 
Job Number: O8188589
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy

Unique Skills:
• Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
• Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required.
• Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
• 3 years of Database experience, data migration/conversion or related experience preferred.

Principle Duties and Responsibilities:
• Create plans according to schedules, for engineering assignments, and act independently to carry them out.
• Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
• Direct activities for lower level engineering staff assigned to specific projects.
• Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs.
• Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
• Determine user needs and utilize system queries and utilities to support users information research.
• Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
• Design and develop business reports and system status metrics.
• Provide training on new functionalities and upgrades.
• Ensure compliance with FAA regulatory requirements for management and control of all type design data.
• Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
• Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
• Previous experience with digital pre-assembly of product components (aerospace preferred).
• Experience in process mapping and other process improvement techniques preferred.
• Familiarity with computer-aided design, manufacturing and product data management systems.
• Basic knowledge of design engineering and manufacturing engineering applications and processes
• Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
• Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 24-237
Job Location: Savannah, GA
Rate: $57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
PLM Configuration Analyst III

Savannah, GA
Long Term Contract
Pay Rate: DOE

1st Shift

Unique Skills:

Experience with 3DX/V6 preferred

Education and Experience Requirements:

Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required. Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).

3 years of Database experience, data migration/conversion or related experience preferred.


Position Purpose:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities:

Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out.
2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
3. Direct activities for lower level engineering staff assigned to specific projects.
4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
6. Determine user needs and utilize system queries and utilities to support users information research.
7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades.
2. Ensure compliance with FAA regulatory requirements for management and control of all type design data.
3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
2. Previous experience with digital pre-assembly of product components (aerospace preferred).
3. Experience in process mapping and other process improvement techniques preferred.
4. Familiarity with computer-aided design, manufacturing and product data management systems.
5. Basic knowledge of design engineering and manufacturing engineering applications and processes.
6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
Languages Required (in addition to English): None
 
Job Number: 8978
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
PLM Configuration Analyst III

Location: Savannah, GA
Pay Rate: $57/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
-Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Six (6) years of engineering or IT experience required.
-Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
-3 years of Database experience, data migration/conversion or related experience preferred.

Position Purpose:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities/Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Direct activities for lower level engineering staff assigned to specific projects. 4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 6. Determine user needs and utilize system queries and utilities to support users information research. 7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems. 8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 8822
Job Location: Savannah, GA
Rate: 57
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Pilot Controls Systems Engineer

Description:


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

  • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


    • Requirements: management

    • System/Mechanical design, modeling, analysis, and review

    • Test/verification planning, development, and execution,

    • Occasional customer interface, coordination, and communication, and

    • Coordination with manufacturing operations.



 


Qualifications:



  • Proficiency in using DOORS software for Requirements capture and management is a plus.

  • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

  • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


 


Education:



  • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems






 
Job Number: R13922
Job Location: Irvine, CA
Rate: 60-70
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Aerodynamics Engineer

Description:
Provide technical leadership for the Aerodynamics group.
Lead development of Aerodynamic requirements for other vehicles based on customer requirements.
Lead the development of processes to support Aerodynamic analysis
Coordinate with ground test and flight test teams to support the qualification for entry into customer service and lead the creation of test plans to support these activities.
Coordinate with management, engineering and other integrated product team staff regarding vehicle design, analysis and testing.
Provides technical mentoring to junior engineers in all technical areas.
Support loads event simulation model development and validation of handling qualities, stability, and control criteria for suborbital space missions
Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
Works with other engineering groups to ensure proper application of design and P&HQ requirements
Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
Develop standardized analysis and reporting tools
Perform model updates from data collected during vehicle or component testing and data created with analytical tools
Develop and maintain P&HQ databases for use in analysis during all flight phases
Develop and substantiate rational P&HQ criteria and requirements for unique vehicles with unconventional configurations
Air Data Experience
Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
Anticipates and resolves issues by developing standards and guidelines for diverse engineering activities
Ability to problem solve with a balance of technical product, cost, and schedule
Determines technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative
Maintains current knowledge of developments in the field of specialty and/or other related spacecraft innovations to improve quality and effectiveness of product


Required:
Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 15 years of experience in aerodynamics development
Experiences in wind-tunnel and flight test aerodynamic model validation
Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
Test plan development and data analysis experience a strong plus
Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
Advanced skills with Linux, Python, Simulink, MATLAB, Fortran, C, C++, and software development best practices.
CATIA V5 experience preferred
Experience with FUN3D, NSU3D, Pointwise, and/or similar RANS and gridding methods

The Structures Company is an AA/EOE.
 
Job Number: 210
Job Location: Mojave, CA
Rate: DOE
Per Diem: Yes
Duration: 9+ Month/Permanent
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Review Engineer (10 Openings)

Description:
Product Review Engineer's (10) needed for a contract opportunity with Yoh’s client located in Everett, WA

The Big Picture – Top Skills Should You Possess:
• Applies knowledge of Boeing design principles to assess and resolve product/process issues through the product lifecycle. Analyzes, conducts root cause analysis and develops dispositions for design non-conformances.

What You’ll Be Doing:
• Applies engineering principles to research technical, operational and quality issues that cannot be resolved by customer and designs interim and final engineering solutions. Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
• Develops and implements product/process improvements. Supports Integrated Product Teams (IPT) and participates in design reviews.
• Represents the engineering community in the build through post production environment. Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment. Participates in on-site disabled product repair teams and accident investigation or support team. Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.

What You Need to Bring to the Table:
• Designs interim structural repairs and conducts static strength analysis. Develops non-destructive test procedures, tools and standards. Conducts simple static strength analysis.
• Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. ABET is the preferred, although not required, accreditation standard.
• Please include month/day of birth (NOT Year) – required for this aerospace client •

Bonus Points! Otherwise Known As Preferred Qualifications:
• Aerospace or Defense exp.

Opportunity is Calling, Apply Now!

Recruiter: Albert Peniche – 314-791-1565
Email resume in MS Word Doc. Format: Albert.Peniche@Yoh.com
 
Job Number: AP204637
Job Location: Everett, WA
Rate: $40 to $ 65 p/hr
Per Diem: No
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 06/20/2022
Last Updated: 07/18/2022
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Location: Windsor Locks, CT
Duration: 1 Year Contract
Pay Rate: $48.25/Hr
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****

Requirements:
- Project Engineer with a background in Aerospace, Mechanical or Chemical Engineering with 4 years minimum of experience in Space, Aerospace or Defense.
- Must have experience leading Integrated Product Design (IPD) Teams in creation and support of new and legacy aerospace product designs.
- Work per the direction of the Program Engineering Manager (PEM) or designees to assist in team execution to project plans and ensure assigned projects are completed within budget, scope, schedule, and to the highest level of quality.
- Working knowledge of Project Management Body of Knowledge is required.
- Must have understanding of SAP/ERP hardware requirements management process.

Essential Duties and Responsibilities:
• For assigned projects, facilitate and lead IPD Team with members from all functions.
• Plan, execute, coordinate, communicate all IPD Team activities including requirements generation, development, design and technical reviews, procurement, fabrication, assembly and testing of development, qualification and flight hardware.
• Oversee project plans, work breakdown structures, cost estimates, budgets and risk management plans.
• Work with IPD to create hardware development, procurement, fabrication, assembly and test plans.
• Ensure targeted goals (schedule and cost) are communicated to the team members.
• Schedule and conduct effective meetings to coordinate planning and scheduling, task assignment and resource allocation to ensure holistic team effort within authorized scope. Ensure actions are documented and driven to closure commitments.
• Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
• Proactively direct, monitor and control scope and performance of assigned projects to approved budget and schedule using insight to identify trends and project challenges. Recommend and implement preventive and corrective actions.
• Ensure project scope and delivery approach/timeline are aligned with Program Office, contract and customer requirements.
• Risk and Issue Management: identify, assess and manage project risks and issues. Develop and execute mitigation and response plans.
• Supply Chain support: interface with Planning and Procurement regarding project material and component requirements. Visit supplier plants as required to ensure manufacturing processes meet requirements.
• Build and maintain strong and effective relationships, and provide insights and guidance to supporting departments to secure compliance with schedules, coordinate tasks and resolve problems.
• Support Program and Project Management on proposals.
• Configuration Management and Change Control: Initiate in-scope engineering changes working with all functions to implement approved changes.
• Ensure IPD Team work is performed to UTAS approved Standard Work and Procedures
• Some limited program travel may be required.

Skills Required:
• Exceptional planning, organizational and analytical ability
• Strong interpersonal, influencing, written and verbal communication skills
• MS Office Suite proficiency
• MS Project scheduling and resource planning
• Earned Value Management
• Decision making and problem solving
• Failure and Root Cause analysis
• Ability to resolve highly complex technical issues
• Must be able to interpret technical drawings, specifications, illustrations and written documents.
• Status summary and presentation skills
• Program Management Professional Certification is a plus

Desired Attributes:
• Positive energy
• Leadership
• Results driven
• Team-oriented
• Self motivated
• Innovative

Education:
• BA/BS degree in Engineering w/ 6+ years of experience in Project Engineering role
• MA/MS degree in Engineering w/ 4+ years of experience in Project Engineering role. This is a temporary position. Opportunity for transition to permanent position may develop dependent on project requirements.
 
Job Number: 9036
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Purchasing Agent III FL

Description:
8233183
Job Title: Purchasing Agent III

Number of Positions: 1

Remaining Positions: 1

Duties:
Supply Chain professional needed for a dynamic Aerospace company. We are looking for a diverse, motivated, and experienced candidate who has demonstrated success buying everything from piece parts to services to complex Aerospace or Department of Defense components. In this role you will be negotiating/managing suppliers, analyzing supplier proposals, performing price/cost analysis, creating a CPSR compliant procurement file, supporting proposals, solving procurement roadblocks, reporting status to upper management and the customer, and making independent decisions that lead to company successes. We need a team player who can work with and support all functional departments. The Supply Chain team has an important role in this organization and we are looking for someone who can make an immediate positive impact.

Skills:
• The successful candidate will perform all duties related to the procurement of goods and services as required
• The procurement duties include, but are not limited to, generation of Requests for Proposals, Proposal Evaluation, Source Selection, Negotiations, File Documentation, etc. within scope of authority
• Knowledge of FAR/DFARS is mandatory
• Prepares Purchase Orders/Subcontracts and documents procurement file accordingly
• Analyzes requirements for sourcing
• Develops new vendors as appropriate
• Monitors Purchase Order/Subcontract performance – ensuring our suppliers are compliant with the requirements (i.e. schedule, delivery, pricing and quality)
• Discusses defective or unacceptable goods or services with inspection or quality control personnel, users, vendors, and others to determine source of trouble and takes corrective action
• Approves and submits invoices for payment
• Must be able to work effectively independently and as part of a team
• Proficiency in Microsoft Office applications
• Cost Point experience a plus

• At least two (2) years of experience with DOD programs.

• Possess excellent verbal and written communication skills, with the ability to communicate with all levels of company and supplier management

• Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, and percentages.

Education:
Bachelor’s degree in Business or related discipline or equivalent combination of education and experience with a minimum of five (5) years of related experience.


Skills:
Required
BUYING AEROSPACE CORRECTIVE ACTION COST ANALYSIS COST POINT

Additional
DOCUMENTATION DOD EXCELLENT VERBAL AND WRITTEN COMMUNICATION SKILLS INVOICES MICROSOFT OFFICE PRICING PROCUREMENT PROPOSALS PURCHASE ORDERS PURCHASING PURCHASING AGENT QUALITY CONTROL SUBCONTRACTS SUPPLIER MANAGEMENT SUPPLY CHAIN TEAM PLAYER BUYING/PROCUREMENT


State/Province: Florida
City/Town: Orlando

Start Date: 05/28/2018 Hours Per Week: 40.00
Est. End Date: 09/28/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 Days Per Week: 5.00
 
Job Number: MB-A8233183
Job Location: Orlando, FL
Rate: 40/hr max
Per Diem: no
Duration: 4 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Essential Functions:
• Provide Premier customer quality interface and expertise in order to proactively assure that their requirements are understood and satisfied.
• Host & support Customer, Internal and Third Party Audits as required.
• Execute the development, implementation and continued improvement of the Quality Management Systems throughout the operation.
• Working collaboratively with all levels of the site in supporting Eaton’s Business System goals and objectives.
• Analyzing organizational Customer/Internal quality metrics and performing periodic reviews to evaluate results recommending, planning & taking actions to close gaps at an operational level.
• Champion activities to contribute and drive in the investigation and elimination of internal and external quality problems using applicable problem solving techniques for determining Containment, Root Cause and Corrective/Preventive Action solutions along with Verification actions.
• Contribute in the implementation of quality assurance training programs and conducting training in quality-related topics
• May participate as required in product development gate review meetings with launch activities including the identification of customer expectations and ensuring compliance that Quality requirements are flowed down and met
• Provide support in the way of development and evaluation of process capability, process control plans, analysis of out-of-control conditions and process audits.
• Develop, implement and audit inspection and test plans, acceptance criteria, and process/work instructions.
• Assist in establishing technical advice & maintaining an atmosphere of Continuous Improvement to cross-functional teams.
• Dimensional review of G&T to AS9102 standards.

Qualifications

Basic Qualifications:
• Bachelor’s degree from an accredited institution
• Minimum of three (3) years of work experience within a Quality function


Position Criteria:
• Working knowledge of process auditing techniques to ensure compliance to defined quality requirements
• Ability to learn product and end user application/specifications, including product testing requirements
• Knowledge of product manufacturing, assembly, test and inspection processes
• Willingness to ‘Think outside the box’ and can work well individually or in a Team environment
• Work to resolve supplier technical issues in a timely manner to ensure a continuity of supply of compliant material

Preferred Qualifications:
• Bachelor’s degree in Engineering from an accredited institution
• 5 years of progressive experience in Aerospace industry
• ASQ Certified Quality Engineer (CQE) and/or Certified Quality Auditor (CQA)
• Customer-specific quality registration, certification processes experience (i.e. ISO9001, ISO/TS-16949, AS9100)
• Previous work experience of problem solving methods such as: Six Sigma, 8D, root cause analysis, and the associated statistical tools used to analyze problems, evaluate and complete improvement projects
• Working knowledge and experience in process auditing techniques to ensure compliance to defined quality requirements
• Previous work experience in Lean Manufacturing and Process Variation Reduction concepts and tool sets as they relate to process/product variability, and root cause and corrective action determination
• Familiar with and experience in product conformity requirements
 
Job Location: Camarillo, CA
Rate: $40-$45
Per Diem: No
Duration: apprx 12 mos
Input Date: 11/14/2020
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector II ( Northridge, CA ) S8582059 & 8752947

Description:
Quality Inspector II ( Northridge, CA ) S8582059 & 8752947
6 Month Contract

Pay rate $30-40/hr W2

**Secret clearance is REQ'D.

Will be working in secure facility. Required skills: **Must be familiar w/ soldering and acceptance standards.
*Must have strong understanding of quality systems in a manufacturing environment.
*Ability to perform in-process/final inspection in production environment.
*Must have IAW J-STD-001 CLASS 3, IPC-A-610 CLASS 3, and IPC/WHMA-A-620 CLASS 3 Certifications.
*Must be Intermediate to proficient computer literacy. TipQA experience a plus!

**Environment: Will be joining Quality Assurance team of 3 Inspectors, 1 Quality Engineer and Sr. Quality Engineer. Please note that this person will be working in aerospace production environment supporting 2 product lines. Will be cross trained on both lines. Position open due to surge in workload.
 
Job Number: S8582059
Job Location: Northridge, CA
Rate: Open
Per Diem: No
Overtime: Poss
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality MRB Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Support manufacturing and inspection of composite aerospace components.


Review design models and develop inspection plans.


Develop First Article Inspection plans and oversee their successful completion.


Work closely with operations personnel to develop manufacturing and inspections solutions and solve inspection issues in hand layup, secondary bonding, autoclave cure, machining, NDI, assembly, and final inspection processes.


 


Requirements & Qualifications:


Experience in working with aerospace specifications and drawings


Experience supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment


Knowledge of root cause / corrective action processes and techniques


Functional knowledge of production control systems (SAP/Visual Mfg/etc)


 


Preferred Skills and Experience:


Composite processing experience


Experience in Quality Assurance and processing MRB


Understanding of AS9100 requirements


 


Education:


Bachelor’s Degree in Aerospace, Mechanical, Manufacturing, Chemical Engineering or related and 5 years of applicable experience


 
Job Number: O8128904
Job Location: Clearfield, UT
Rate: 60-80
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Design Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • Our expertise in flight deck avionics, cabin electronics, mission communications, information management, and simulation and training is strengthened by our global service and support network that spans 27 countries.

  • Working together, our global team of 20,000 employees shares a vision to create the most trusted source of communication and aviation electronics solutions, applying both insight and foresight to help our customers succeed. We are currently seeking qualified candidates for a Senior JAVA Software Engineer position to support airborne platforms and ground based systems across multiple programs.


 


Candidates must have the following experience:



  • At least 5 years of hands on coding in Java using industry standard object oriented design principles

  • Experience developing applications on Red Hat Linux (RH7) operating systems or the equivalent

  • Familiarity with virtual machine environments and their usage in complex system architectures

  • Experience in all software lifecycle disciplines including design, implementation, and test

  • Proficiency in industry standard IDE tools (such as Eclipse, Visual Studio or equivalents)

  • Proficiency in industry standard configuration management tools (such as SVN, GIT, Clearquest/Clearcase or equivalents)


 


The following experience is desirable:



  • Experience developing software for military applications and/or experience of working government programs

  • Experience with build and test automation tools

  • Experience developing on Windows Desktop/Windows Server operating systems

  • Experience with setup/configuration of virtual machine environments (such as VmWare or equivalents)

  • Familiarity with Atlassian Software Development and Collaboration tools (such as JIRA, Confluence, JAMA, Bamboo)

  • Experience with code analysis tools (such as Coverity or equivalents)

  • Experience with Ethernet-based interfaces/protocols (IPv6 and SIP), serial interfaces, etc.

  • Understanding of Network Management fundamentals

  • Experience using SNMPv3 to monitor/control equipment

  • Working knowledge of scripting languages such as Perl, bash, etc.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13998
Job Location: Cedar Rapids, IA
Rate: 55-65
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RTL & FPGA Design Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Role description & Responsibilities:



  • RTL / FPGA and HW Design Sr. Engineer for tactical missile system development and production programs


 


Key responsibilities include:



  • The desired candidate will be experienced (5 to 10 years) in RTL coding using VHDL and is proficient with hardware development using state of the art both Xilinx and Altera FPGA development toolsets.

  • Experience with high speed communication ports is a plus.

  • Familiarity with design security features in Xilinx and Altera FPGA are an added plus as are any experience in anti-tamper and cybersecurity implementations.

  • The candidate will also be experienced with the Mentor Graphics EDA toolset for design and simulation of circuits and be familiar with state-of-the-art programmable logic and electronic devices including high speed communication, embedded processors, and DSPs.

  • Experience with the FPGA and HW design process from concept to test and delivery is also required.

  • Hardware test and integration experience in a laboratory environment will include practical usage of a variety of test equipment including Oscilloscopes, Logic Analyzers, and DMMs. Strong knowledge of programming languages including C/C++, as well as Microsoft Office is desired.


 


Experience and Skill Requirements:



  • Minimum 5 - 10 years of experience in RTL/FPGA and HW product design and development.

  • Direct Digital conversion experience / signal processing hardware experience / Data link experience is a plus.

  • Experience desired in manufacturing support, characterization, test.

  • Ability to use and collect test data using Digital Storage Oscilloscopes, Digital Multimeters, Logic Analyzers, Software Based Debugging tools, In-Circuit Emulators, RF Network Analyzers, Spectrum Analyzers, and signal generators required. Interpretation of RF Test data and radiation patterns desired

  • Familiarity with Mentor PCB Design suite (DxDesigner, Layout, Simulation), Microsoft Office (Word, Excel, Power Point, Outlook, Visio), and CAD tools.

  • Familiarity with Printed Wire Board and Circuit Card Assembly processes (schematic capture, layout, fabrication, assembly) from concept thru design and production and sustaining through end-of-life.

  • BS in Electrical Engineering, MS preferred.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems





 
Job Number: O8243741
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Robotic/Control Engineers (PLC) - Many Needed

Description:
**Must have a B.S. Degree
Experience leading control system design projects for aerospace and/or automotive industries.
Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.

**Must be able to start within 2 weeks from acceptance

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-WA-PLC
Job Location: Everett, WA
Rate: $75.00-$85.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Guidance Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Manager Notes:



  • Team is significantly understaffed w/ new business continuing to flow in.

  • Needs strong missile application exp.

  • Matlab expertise and C++ exp req'd.

  • Masters degree pref.**


 


Overview:



  • Develop guidance algorithms and trajectory shaping for air-launched tactical missile flight.


 


Requirements



  • Must have SECRET clearance and ability to work on-site in Northridge, CA.

  • Matlab and C++


 
Job Number: O8196695
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mass Properties Engineer - Aerospace and Defense

Description:
Ingenium Technologies - San Diego, CA 92064



Several Senior Mass Properties Engineers are needed for a proven and reliable world leader in Aviation Air-to-Ground Communications, Unmanned Aircraft Systems and Tactical Reconnaissance Radars, as well as advanced high-resolution Surveillance Systems.




Responsibilities will include but not be limited to:

Interface with multiple engineering disciplines to establish policy and procedures for companywide control and documentation of mass properties and weight & balance of aerospace vehicles.
Perform detailed analysis tasks to insure hardware meets all mass properties and inertia estimates.
Establish testing requirements and control methods for weights and balance of completed systems.
Lead setup and test for weights and balance of completed systems.
Perform various mechanical design tasks related to demonstrated competencies as directed.
Apply Automated Weight & Balance Systems (AWBS) procedures for aerospace applications.
Additional Qualifications: A Professional Engineering License is desirable.



Required Experience:

10 to 15 years of experience with establishing and controlling weights and balance for aircraft.
Subject Matter Expert in the field of Weights and Mass in the aerospace industry as typically demonstrated by previously published work in industry publications, presented on subject matter in national engineering symposiums, or a holder of patents in this field.
Has demonstrated leadership ability by directing/developing the solutions to highly technical and complex engineering problems and has been a key participant in attracting and retaining engineering business as well as professional staff.
Must posses the ability to guide the resolution of unusually complex technical problems, champion the development of new concepts and principles; and serve as an expert spokesperson on those concepts and principles.
Must also possess excellent communication, presentation, and interpersonal skills, be customer focused, and able to work on a self-initiated basis or in a team environment.
Required Education: Bachelor's degree, Master's degree or PhD in engineering or a related technical discipline from a four year accredited institution.



Position: Permanent, Direct Hire, Relocation Available



Location: San Diego, CA 92064



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 135535
Job Location: San Diego, CA
Rate: open
Per Diem: no
Overtime: no
Duration: Direct Hire
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sheetmetal Tech Sr

Description:
Unique Skills:

Needs to have Aircraft sheet metal experience and have dependable transportation along with a good work attitude willing to contribute to a team environment. Must have own tools example palm drill motor, angle drill, rivet gun, rivet sets, bucking bars scale normal S/M hand tools etc.


Education and Experience Requirements:

High School Diploma or GED required. Four (4) years years of sheetmetal and/or fabrication experience preferred. Experience in aerospace industry.


Position Purpose:
The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train other Sheetmetal Technicians.
 
Job Number: 24-DAL
Job Location: Dallas, TX
Rate: 30.34
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Chris
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation Software Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Managers Notes:



  • Team is significantly understaffed w/ new business continuing to flow in.

  • Needs strong Defense exp.

  • Matlab expertise and C++ exp req'd.

  • Master's degree pref.


 


Overview:



  • Develop sensor models and conversion of Matlab code into C++.


 


Requirements:



  • SECRET clearance required and ability to work on-site in Northridge.


 
Job Number: O8206144
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Yes
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Application Developer/Analyst

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Description:



  • The Application Developer will work as part of a small team in the Information Technology Enterprise Applications Department.

  • This position will have a focus to deliver custom developed SharePoint Applications and Cognos Reports in support of the functional areas of the business.

  • When needed, this position requires the ability to assist business users in defining their requirements, researching, developing to industry software and database design principles and promoting new coding standards to peers.

  • This position will work closely with all end users, department supervisors, department managers, value stream managers, operations plant managers as well as the Business Systems organization. 

  • Must be a US citizen, and ability to immediately obtain an Interim Secret Clearance.

  • While the position does not require off hours on a regular basis, the Application Developer must have the capability to work off hours/weekends as required (e.g., taking a system down, performing an upgrade, etc.). 


 


Responsibilities 



  • Develop SharePoint Sites with custom applications and workflows 

  • Modify existing and create reports with the Cognos Report Authoring Tool 

  • High level of experience working in SQL Server Databases 

  • Write SQL code for troubleshooting and data analysis 

  • Work with IT management to provide schedules for software and report deliverables 

  • Works directly with users of data to resolve data conflicts, solution incidents and inappropriate usage 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8316239
Job Location: Northridge, CA
Rate: 50-60
Per Diem: Yes, Split
Overtime: Some
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Are you a seasoned Software Engineer? Do you want to work with a company that is leading in the aerospace industry? We have an opportunity in Colorado for a Software Engineer with solid experience. This fast-paced company offers a professional environment and room for advancement. Learn more about this opportunity, and why you should apply today!

The ideal candidate for this position will perform the following tasks:
* Be the primary interface with project leads and System Engineers for software architecture decisions.
* Own multiple software engineering lifecycle activities, to include requirements analysis, object oriented analysis & design (OOD), implementation, unit testing, integration testing, and delivery.
* Support development of complex internal and external system interfaces.

Mandatory Qualifications and Experience:
* Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Masters degree.
* TS/SCI cleared software engineers.
* Agile Software Development experience Java programming expertise & knowledge of Oracle or other relational databases
* Demonstrated object oriented programming experience Configuration management expertise including software release tools/processes and management of data Knowledge of the UNIX and/or widows programming environment & UNIX shell scripting
* Requirement to generate documentation to accompany developed software.
* Must have SCI clearance.

Desired Qualifications and Experience:
* Experience as a scrum master.
* Demonstrated object oriented programming experience in Java OS background to include Sun Solaris or Linux, and Windows Object Oriented Methodologies and UML Modeling Techniques.
* Knowledge of Oracle or other relational databases.
* Web development experience with Ruby on Rails or a Node.js framework.
* Knowledge of NoSQL Databases
* Knowledge of JavaScript and CSS; jQuery and Dojo library experience; Subversion or Git experience.
* Amazon Web Services experience.
* Ability to generate documentation to accompany developed software.

The ideal candidate for this position will possess the following skills and characteristics:
* Strong communication and interpersonal skills.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127873
Job Location: Littleton, CO
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCp
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Electro-Mechanical Testing

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • This opening is for a Software Engineering position within the Test Engineering Center of Excellence in Irvine California.

  • This Software Engineer will be a part of an integrated, cross-functional team responsible for designing, developing, deploying and supporting Test Equipment for Electro Mechanical systems.

  • Applicants should have the ability to define, develop, validate, and work with a cross functional group of Test Engineers assigned to a development project.


 


Qualifications



  • Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline

  • US Citizenship is required

  • Experience in real-time control systems is required

  • Experience with MS Windows based applications, C / C++ / C# and National Instruments Labview is required

  • Experience with safety critical software development methods (such as DO-178, DO-254) or Agile software development tools are desired.


 


PREFERRED



  • Experience with Electromechanical Systems is a plus

  • Experience with National Instruments development tools (CVI, Test Stand) is a plus

  • Experience with FPGAs programming including National Instruments cRIO technologies is a plus

  • Project management/project engineering experience preferred


 


The following talents and characteristics are very desirable: 



  • Knowledge in the areas of baseline control, earned value, risk management and product support 

  • Familiarity with various interface standards is highly recommended (ARINC 429, MIL-1553, RS-232/485. Ethernet, USB)

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14045
Job Location: Irvine, CA
Rate: 60-70
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Military Simulators (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • This software engineering position is with Rockwell Collins on the Navy's E-2D Advanced Hawkeye team in the Simulation & Training Solutions (STS) business area located in Sterling, VA, just west of Washington, DC.

  • STS develops, builds and modifies aircraft simulators and training systems for both military and commercial customers.

  • Devices range in complexity from a desktop trainer to a high fidelity weapon system and full-flight training systems including full visual, motion, and simulator interoperability (HLA/DIS).


 


Responsibilities:



  • Capture and perform requirements analysis

  • Further develop the architecture of software product designs

  • Develop detailed software specifications

  • Provide accurate time estimates for the software development effort

  • Design, develop, implement, test, and debug real time software applications and associated user interfaces


 


Required Qualifications:



  • BS degree in Computer Science or a STEM related degree.

  • 5 - 10 years of experience with full lifecycle software development, including:

  • Requirements analysis and deriving requirements

  • Preliminary and Detailed Design

  • Code and Unit Test: Object-Oriented Programming using C++ in Visual Studio

  • Source code control (Subversion, Git, ClearCase etc.)

  • Hardware/Software Integration

  • Test and Verification


 


HIGHLY PREFERRED:



  • Experience with one or more of the following:

  • Avionics and/or Satellite Comms

  • Datalinks (Link 16/Link 11)


 


Desired Qualifications:



  • Familiar with other programming languages (C, Ada)

  • OS Experience: Windows 7, Windows 10, Linux or VxWorks

  • Real-time programming

  • Previous aircraft simulation software development a plus

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14015
Job Location: Sterling, VA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Military Simulators (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • This software engineering position is involved with the Navy's E-2D Advanced Hawkeye team in the Simulation & Training Solutions (STS) business area located in Sterling, VA, just west of Washington, DC.

  • Develops, builds and modifies aircraft simulators and training systems for both military and commercial customers.

  • Devices range in complexity from a desktop trainer to a high fidelity weapon system and full-flight training systems including full visual, motion, and simulator interoperability (HLA/DIS).


 


Responsibilities:



  • Capture and perform requirements analysis

  • Further develop the architecture of software product designs

  • Develop detailed software specifications

  • Provide accurate time estimates for the software development effort

  • Design, develop, implement, test, and debug real time software applications and associated user interfaces


 


Required Qualifications:



  • BS degree in Computer Science or a STEM related degree.

  • 5 - 10 years of experience with full lifecycle software development, including:

  • Requirements analysis and deriving requirements

  • Preliminary and Detailed Design

  • Code and Unit Test: Object-Oriented Programming using C++ in Visual Studio

  • Source code control (Subversion, Git, ClearCase etc.)

  • Hardware/Software Integration

  • Test and Verification


 


Desired Qualifications:



  • Familiar with other programming languages (C, Ada)

  • OS Experience: Windows 7, Windows 10, Linux or VxWorks

  • Real-time programming

  • Previous aircraft simulation software development a plus

  • Experience with one or more of the following:

  • SAF, NGTS

  • Datalinks (Link 16/Link 11)

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R13933
Job Location: Sterling, VA
Rate: 60-70
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret CA

Description:
Requirement#AERO-REQ-0776
Work Location Palmdale, CA
Work Week 9/80-A

Needed Date03/27/2018
End Date03/15/2019
Number of Resources1
Security Clearance Secret


Title Software Engineer-N
Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Modeling and simulation efforts. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Good presentation skills. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances Candidate must possess an active SECRET clearance.
Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink Candidate must possess an active SECRET clearance with a background investigation within the last 5 years.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering
Interview RequiredYes

OT AllowedYes (OT Limitation: No)
TravelNo
Non-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0776
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Analyst

Description:
Senior Analyst

Location: Farmington, CT
Pay Rate: DOE
Duration: 6+ Month W2 Contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**


Job Description

This company is seeking a Senior Analyst to join its International Trade Compliance (ITC) Corporate team. The candidate will work with ITC professionals from Company's Major Operating Units (MOUs) as well as other compliance professionals across Company to build and sustain a world-class compliance program.

Duties include:
Collect, prepare and analyze metrics and present in a manner that displays areas of opportunities, visually pleasing, with key take-aways to senior level management. Must be able to review, trend, and communicate the data and findings clearly.

Automate manual processes includes training, community and overall program metrics.

Prepare and deploy creative communications and regular newsletters to the ITC community.

Must be able to prepare and deliver executive level communications and briefings.

Create intuitive instructions, quick reference guides and standard work for the user community.

Create and maintain program tracker for Company led initiatives

Follow up on MOU deliverables, status and track to completion.

Development of a cadence to ensure the projects remain on schedule

Support Data Privacy self-assessment and inventory processes

Support monthly ITC Councils, Quarterly Operating Reviews and re-occurring meetings by capturing action items, meeting minutes, follow up and closure of those as well as a consolidated tracking mechanism.

Provide key support in ad-hoc projects specific to enhancing and building our ITC infrastructure.

Create and deliver training using Storyline Software.

Create Total Productive Maintenance (TPM) process for regular review and updates of our corporate policies and procedures.

Create process to document and capture policy and procedure exceptions. Be able to review and trend the data.

Preferred Qualifications:
Attention to detail a must
IT / data analytics background preferred to assist with metrics and automation
Ability to communicate both written and verbal in a clear and straightforward manner with excellent interpersonal skills. Also, demonstrated ability to handle multiple projects and tasks with clear prioritization and organization.
Shown strength in project management
Shown skill with project leadership, methods and tools
Demonstrated ability to lead and coordinate with cross-functional teams
Shown skill to communicate to a broad audience including Executives
Demonstrated ability to create training/reference documentation and deliver hands-on training
Demonstrated proficiency with MS Office products, high proficiency with PowerPoint, Excel, Project, Visio, and Word.
Articulate / Storyline Software experience helpful (10-30%).
Technical background within aerospace manufacturing /engineering preferred but not required.
Familiarity with U.S. export and import regulations preferred.

*Education / Certifications
Bachelor’s Degree in Business, Information Technology, Engineering, or Operations, or related field required with 2 to 4 years of experience.
MA/MS degree in Business Administration, Project Management or Information Technology or related field with 1-2 years of experience.
PMP Certification preferred
 
Job Number: 9083
Job Location: Farmington, CT
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Composite Design Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Overview:


Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.


Experience is design of laminates, sandwich structures, and bonded and bolted assemblies


 


Role description & Responsibilities:


Highly motivated design engineer with experience designing composite structures and assemblies for military and/or commercial aircraft.


Responsibilities include but are not limited to the design of laminates, sandwich structures, and bonded and bolted assemblies.


Skills should include relationally linked modeling, establishing datum schemes for assemblies, and performing tolerance stackup analysis.


 


Experience Requirements:


Minimum of 10 years related experience in design engineering function


Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design


Experience leading a team of engineers


Assembly level design including establishment of data schemes and tolerance analysis


Knowledge of composite materials and manufacturing processes


 


Experience Preferred:


Definition of layups and ply patterns with Fibersim


CAD automation, programming, script writing


Previous experience in aerospace manufacturing facility


 


Education/Certifications:


BS degree in Civil, Mechanical, Aerospace Engineering, or related


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8024350
Job Location: Clearfield, UT
Rate: 75-85
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Analog and Digital Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Role description & Responsibilities:



  • Analog and Digital Sr. Engineer for tactical missile system development and production programs


 


Key responsibilities include:



  • Active DoD Secret Clearance

  • Experience with Missile hardware design, range safety, telemetry and flight terminations systems highly desired.

  • Develops, coordinates and conducts Analog, Power and Digital designs and evaluations of engineering design concepts. Which includes FPGAs with high speed interface.

  • Create Analog, Power and Digital designs simulation models using computer modeling tools.

  • Creates test plans and procedures for a variety of circuit card, environmental testing and Electrical System Integration.

  • Oversees or participates in hardware and integration in a laboratory environment testing.

  • Identifies opportunities for improvement based on review of failure data and supports development and implementation of component design improvements or updates.

  • Supports design reviews and test activities, as needed. Supports subcontractor evaluation, selection and coordination activities with respect to Analog, Power and Digital needs.


 


Experience and Skill Requirements:



  • Minimum 7-10 years of experience in Analog, Power and Digital product design and development.

  • Safety engineering knowledge desired.

  • Proven hands on design experience of board level and system level products.

  • Experience with Open System Architecture

  • Direct Digital conversion experience / signal processing hardware experience / Data link experience is a plus.

  • Experience desired in manufacturing support, characterization, test.

  • Ability to use and collect test data using Digital Storage Oscilloscopes, Digital Multimeters, Logic Analyzers, Software Based Debugging tools, In-Circuit Emulators, RF Network Analyzers, Spectrum Analyzers, and signal generators is a plus.

  • Ability to read and interpret military requirements, specifications, and Engineering drawings/schematics.

  • Familiarity with Mentor PCB Design suite (DxDesigner, Layout, Simulation, Hyper lynx), Microsoft Office (Word, Excel, Power Point, Outlook, Visio), and CAD tools and Matlab.

  • Familiarity with Printed Wire Board and Circuit Card Assembly processes (schematic capture, layout, fabrication, assembly) from concept thru design and production and sustaining through end-of-life.

  • BS in Electrical Engineering required, MS preferred.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8243198
Job Location: Northridge, CA
Rate: 80-100
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Composite Structural Analysis Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


We are looking for a Talented Sr. Composite Structure Analysis Engineer with experienced in composite structures and assemblies for military and/or commercial aircraft and experience with the characterization of composite materials with ASTM standard tests.


 


Role description & Responsibilities:


Highly motivated structural analysis engineer with composite structures and assemblies for military and/or commercial aircraft.


The candidate should also have experience with the characterization of composite materials with ASTM standard tests.


Responsibilities will include but are not limited to the analysis of laminates, sandwich structures, bonded and bolted assemblies, and leading composite material characterization activities including: authoring test plans and test reports, data reduction and calculation of material allowables.


 


Experience Requirements:


Minimum of 10 years related experience in design engineering function


Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred)


Static structural and structural/thermal analysis


Buckling, stability, and modal analysis


Loads definition


Material characterization testing


Knowledge of composite materials and manufacturing processes


 


Experience Preferred:


Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable


Definition of layups and ply patterns with Fibersim to generate finite element models


Script writing, workflow automation


Requirements definition and verification


Previous experience in aerospace manufacturing facility


 


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8024348
Job Location: Clearfield, UT
Rate: 75-95
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $65.00/HR
Duration: 1 year contract
Shift: 1st Shift
No Per Diem Split

**CONSTRUCT AND ANALYZE FINITE STRUCTURAL MODELS, USING ABAQUS**
**PERFORM DETAILED ANALYSIS USING CLASSICAL ANALYSIS AND FEA METHODS** **WORKING KNOWLEDGE OF CATIA V5**
**MUST have a Bachelor's Degree**
**MUST be a U.S. Citizen**
**MUST have 5+ years of experience with Landing Gear**

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Citizen status.
 
Job Number: 8936
Job Location: Independence, OH
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Fort Worth, TX
Rate: $65.00/HR
Duration: 1 year contract position
Shift: 1st Shift
No Per Diem Split

*****MUST be a U.S. Citizen*****
*****MUST have ABAQUS, CATIA V5, and Landing Gear Experience*****
*****MUST have a Bachelors Degree*****

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.Must be able to verify U.S. Citizen status.
 
Job Number: 8687
Job Location: Fort Worth, TX
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $65.00/HR
Duration: 1 year contract
Shift: 1st Shift
No Per Diem Split

*****MUST be a U.S. Citizen*****
*****MUST have ABAQUS, CATIA V5, and Landing Gear Experience*****
*****MUST have a Bachelors Degree*****

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies

Requirements:
• Bachelor's degree in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Citizen status.
 
Job Number: 8686
Job Location: Independence, OH
Rate: $65.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S6742971 & 8024348

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S6742971 & 8024348
12 Month Contract

Pay Rate: $70-80 /hr W2

• Must have an active clearance with an investigation within the last 4.5 years

JOB DESCRIPTION:
• Talented Sr. Composite Structure Analysis Engineer with experienced in composite structures and assemblies for military and/or commercial aircraft and experience with the characterization of composite materials with ASTM standard tests.
Top three skills:
• Must have an active clearance with an investigation within the last 4.5 years
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 10 years related experience in design engineering function
• Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred)

Bottom three skills :
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team Experience Preferred
• Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
 
Job Number: S8024348
Job Location: Clearfield, UT
Rate: 80
Per Diem: Split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Description:



  • Apply knowledge of structural analysis (e.g., materials technology, finite element modeling, static analysis, fatigue analysis, damage tolerance analysis, thermal analysis, vibration analysis, structural testing, etc.) to determine structural adequacy for customer requirements and regulatory compliance; and to collaborate on structural design, manufacturing, and post-delivery of products.


 


REQUIRED:



  • Active Day One Secret Clearance with recent investigation in last 6 years. 

  • Must have program clearance before starting so target start dates will be 6 weeks from offer

  • 10+ years' experience in the analysis of aerospace structures.

  • Experience in the analysis of composite structures is required.


 


Preferred: 



  • Experience in NX, TeamCenter, MSC Analysis Tools (Nastran, Patran, etc.)

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: S579113
Job Location: Wichita, KS
Rate: 80
Per Diem: Yes, Split
Overtime: YES
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer with active secret CA

Description:
Job title: Structural Analysis Engineer
Job Number: 8216402
Location: Irvine, CA
Compensation: 80/hr DOE
Assignment Length: 12 Months
**Active Secret Clearance to start**

JOB DESCRIPTION:
• Talented Sr. Composite Structure Analysis Engineer with experienced in composite structures and assemblies for military and/or commercial aircraft and experience with the characterization of composite materials with ASTM standard tests.

Top three skills:
• Must have an active secret clearance with an investigation within the last 4.5 years
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 10 years related experience in design engineering function
• Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred)
Bottom three skills :
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team Experience Preferred
• Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable


Role description & Responsibilities:
Highly motivated structural analysis engineer with composite structures and assemblies for military and/or commercial aircraft. The candidate should also have experience with the characterization of composite materials with ASTM standard tests. Responsibilities will include but are not limited to the analysis of laminates, sandwich structures, bonded and bolted assemblies, and leading composite material characterization activities including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
• MUST HAVE AN ACTIVE SECRET CLEARANCE TO BE CONSIDERED FOR THIS ROLE
• **Must have an active clearance with an investigation within the last 4.5 years (or 4 years 6 months)**
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 10 years related experience in design engineering function
• Minimum of 4 years of experience with Abaqus and/or Nastran. (5-15 years, Nastran-NX preferred)
• Static structural and structural/thermal analysis
• Buckling, stability, and modal analysis
• Loads definition
• Material characterization testing
• Knowledge of composite materials and manufacturing processes
• Oral and written communication skills
• Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
• Proficiency with NX, Catia V5, Fibersim, MSC Marc, Altair Hyperworks/Optistruct, and Hypersizer are also desirable
• Definition of layups and ply patterns with Fibersim to generate finite element models
• Script writing, workflow automation
• Constitutive Model Development and implementation
• Requirements definition and verification
• Previous experience in aerospace manufacturing facility

Skills & Qualifications:
• Strong interpersonal skills with the ability to work with a team
• Excellent communication skills are required.
• Ability to make sound decisions
• Ability to multi-task
• Ability to prioritize and manage time effectively

Education/Certifications:
• BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: JE-8216402
Job Location: Irvine, CA
Rate: 80/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineers - Many Needed

Description:
B.S. Engineering Degree & 5+ years experience - Aerospace/Aircraft background
Finite Element/Models/Simulation
Ability to obtain security clearance

**Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-OK-Stress
Job Location: Oklahoma City, OK
Rate: $70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: 7/2/2018
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
One of our top clients is seeking a Structural Engineer that is outgoing and thrives in a fast-paced environment. If you can design structural detail parts and you have 5 years of experience, this is the perfect opportunity for you!

The ideal candidate for this position will perform the following tasks:
* Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft.
* Responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers.
* Support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems.

Mandatory Qualifications and Experience:
* Must be able to obtain Secret security clearance.
* Must be a US Citizen or legally authorized to work in US as a permanent resident.
* Proficient with CATIA V5.
* Understanding of drawing practices, material properties, and manufacturing processes.
* Must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, manufacturing, and other Design IPTs.
* Must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.

Desired Qualifications and Experience:
* Bachelor OR Above Degree in a Engineering Technical Discipline.
* 5 or more years experience in the design of aircraft structures.

The ideal candidate will possess the following skills and characteristics:
* Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook).

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127143
Job Location: Palmdale, CA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 CA

Description:
160829
Requirement#AERO-REQ-0732
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/09/2018
End Date01/09/2019
Number of Resources1
Security ClearanceSecret

TitleStructural Design-N
Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

Active Secret security clearance.--

This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
Desired:

Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



Interview Required
OT Allowed
Non-Exempt
Rate TypePer Hour
Rates
5-8 YrsPay Rate: 90.00 USD
9+ YrsPay Rate: 95.00 USD
 
Job Number: JE-0732
Job Location: Palmdale, CA
Rate: 90-95/hr max
Per Diem: no
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract Position

***MUST be a U.S. Citizen or Permanent Resident***

Required Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)
- Typically a 5-8hr day work week, with some scheduled weekend OT a possibility.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.

2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8790
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Duration: Long Term Contract


****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
- Experience should include creation of engineering dispositions for nonconformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Prior 2nd Shift experience desired.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written/verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, Smarteam, Word, Excel)

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8443
Job Location: Savannah, GA
Rate: $63.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer (Western JAPAN)

Description:
The position will serve as Supplier Quality Engineer based at a Supplier of commercial aircraft assembly / fabrication programs in Western Japan.
Capable of performing Material Review Board activity as a Quality representative.
Lead Supplier Corrective Action Board. Proactively identify and implement Supplier Quality Improvement.
Ability to analyse material flow/internal logistics and identify new process' and manufacturing opportunities for continuous improvement.
Support AS9102 First Article Inspection creation and review for the Supplier.
Will be required to perform quality audits at the Supplier. Issue corrective actions and support the supplier in resolution of corrective Actions as required from escapes, non-conformances, and audits. Support customer audits of the supplier as required.
Utilise inspection tools and media to validate supplier compliance with Engineering requirements, including support for source inspection and driving the supplier toward delegated inspection status.
Qualifications
Japanese and English speaker who is culturally sensitive to communicating and operating in a Japanese work environment.
Bachelor’s degree or equivalent with a concentration in manufacturing engineering.
6+ years of experience in aerospace quality for assembly, fabrication or manufacturing engineering.
Lead auditor certification.
Lean and Six Sigma Certifications or equivalents
Must be able to work and travel independently or collaborate with diverse teams and achieve results.
Should be able to interpret 3D model based definitions and familiar with GD&T
Should be proficient in SAP
Must be proficient MS Word, MS Excel, MS PowerPoint, MS Project, MS Access, MS Excel, SharePoint.
Ability to travel (Domestic Japan and International) approximately 25%
 
Job Number: JOKB876
Job Location: JAPAN
Rate: TBD
Per Diem: TBD
Overtime: No
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: GTM
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer (Western JAPAN)

Description:
The position will serve as Supplier Quality Engineer based at a Supplier of commercial aircraft assembly / fabrication programs in Western Japan.
Capable of performing Material Review Board activity as a Quality representative.
Lead Supplier Corrective Action Board. Proactively identify and implement Supplier Quality Improvement.
Ability to analyse material flow/internal logistics and identify new process' and manufacturing opportunities for continuous improvement.
Support AS9102 First Article Inspection creation and review for the Supplier.
Will be required to perform quality audits at the Supplier. Issue corrective actions and support the supplier in resolution of corrective Actions as required from escapes, non-conformances, and audits. Support customer audits of the supplier as required.
Utilise inspection tools and media to validate supplier compliance with Engineering requirements, including support for source inspection and driving the supplier toward delegated inspection status.
Qualifications
Japanese and English speaker who is culturally sensitive to communicating and operating in a Japanese work environment.
Bachelor’s degree or equivalent with a concentration in manufacturing engineering.
6+ years of experience in aerospace quality for assembly, fabrication or manufacturing engineering.
Lead auditor certification.
Lean and Six Sigma Certifications or equivalents
Must be able to work and travel independently or collaborate with diverse teams and achieve results.
Should be able to interpret 3D model based definitions and familiar with GD&T
Should be proficient in SAP
Must be proficient MS Word, MS Excel, MS PowerPoint, MS Project, MS Access, MS Excel, SharePoint.
Ability to travel (Domestic Japan and International) approximately 25%
 
Job Number: JOKB876
Job Location: JAPAN
Rate: TBD
Per Diem: TBD
Overtime: No
Duration: LT
Start Date: NOW
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: GTM
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer

Description:
System Engineer reports to the Engineering Manager, the System Engineer will utilize aircraft development expertise to participate in the design of new products, solve systems engineering problems, develop and execute objectives for self and others, and have the ability to effect short-term and some long-term business goals within the aviation industry.

JOB RESPONSIBILITIES

• Captures, understands and documents the customer's system requirements (design, structural, materials & processes, flammability, electrical, mechanical systems etc.
• Designs systems architectures in co-operation with aircraft manufacturers
• Performs interior systems analysis, modelling and simulation
• Performs system safety analysis, including hazard assessment and fault tree analysis
• Develops requirements for systems test facilities
• Defines aircraft installation requirements for avionics
• Participates in Product Release Board Technical support of product trials and pilots
• Prepares and initial performance of Acceptance Test Procedures (ATPs)
• Creates functional product specifications
• Performs other related duties as required
• Day to day job includes understanding the requirements and configuration from the customer and flow it down to each disciplines under certification for on-time cert activities.

Bachelor's degree (BA/BS) from four-year college or university in Mechanical, Aerospace, Structural, or Electrical; and a minimum of three years related experience and/or training; or equivalent combination of education and experience.
• Prior experience as a system engineer. Design engineering and configuration management background are beneficial.
 
Job Location: Seattle, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Houston, TX
Duration: 1 Year Contract
Pay Rate: $25.75/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Performs architecture development, technical design, model based design, requirements development, systems analysis, systems integration, and systems verification & validation for NASA and space based products.
- Integrates system activities to support the aforementioned tasks.
- Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.

Additional Job Details:
Our client is one of the world’s largest suppliers of technologically advanced aerospace and defense products. ISR & Space Systems is a business unit within our client and their products reside in deep space, low earth orbit, undersea and on the ground. They are also a major supplier to international space programs. The ISR & Space Systems business has contributed to significant advances in ground, air, space and imaging technology for over 85 years. Within ISR & Space Systems we design and manufacture Environmental Control and Life Support (ECLS) Systems on the International Space Station, including the space suit, and undersea in submarines.

- This is a systems engineering position in support of human spaceflight rated Environmental Control and Life Support (ECLS) systems and Extra Vehicular Activity (EVA) equipment.
- Duties will include the design development of new space rated ECLSS and EVA equipment, sustaining activities such as anomaly resolution, and may also involve 'hands-on' hardware testing.

Education / Certifications
- Bachelor's degree with 5 to 10+ years’ experience
- Conduct/Participate in Design Reviews, Customer Audits, Requirements Analysis and Development
- Test Engineering Experience
- Knowledge of aerospace systems development/verification is a plus
- Experience with Matlab and LabView is a plus
- Must be a U.S. Citizen.
 
Job Number: 9238
Job Location: Houston, TX
Rate: $25.75/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Flight Management

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Description:



  • We are currently seeking qualified candidates for Systems Software Engineering positions on the Rotary Wing FMS in the Flight Management Applications department located in Cedar Rapids, IA.

  • This team is responsible for designing and testing flight management software (navigation, flight planning, guidance, hardware status and control) for rotary wing aircraft.

  • The primary tasks for this position include requirements and test procedure development.


 


Qualifications include: 



  • The Candidate must have FMS and Python experience

  • Experience with systems and software tools (DOORS, Python, ADA, Matlab)

  • Experience with development, verification and integration of Flight Management Systems

  • Experience interacting with domestic and international customers and peers

  • Time management skills - ability to work unsupervised, multi-task and coordinate work

  • Basics of risk management (identify, quantify, and mitigate risks)

  • Effective communication (written, verbal, interpersonal)

  • Scope management

  • Perform cost/benefit analysis

  • Familiarity with the AGILE development process


 


Top Requirements



  1. Previous experience with Flight management systems development, integration or verification

  2. Previous experience with python

  3. Previous experience using DOORS

  4. Track and report technical, cost and schedule issues for their assigned scope of work

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: R14072
Job Location: Cedar Rapids, IA
Rate: 50-60
Per Diem: Yes, Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Military Communications (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description:



  • Become part of the exciting Government Systems Communication Products Organization.

  • As a Senior Systems engineer, there are opportunities for capturing customer requirements, design & development for leading-edge solutions, integration and test verification, as well as working product support during manufacturing of our next generation of Communication Products.

  • These products cover the entire RF spectrum bands. Rockwell Collins’ products are on various military airborne, sea and ground platforms.


 


The following candidate characteristics are required or highly desirable:



  • Knowledge of communications engineering fundamentals including: general radio transceiver architectures/designs, basic radio functional component blocks, performance specifications and test methodologies

  • Demonstrated system requirements capture, design, and decomposition ability

  • Understanding of system validation and verification processes for communications systems

  • Experience using engineering lab equipment: oscilloscopes, spectrum analyzers, network analyzers and signal generators is required


 


Advantageous skills include:



  • Demonstrated program pursuit and capture ability (concept development, technical writing and work estimation)

  • Familiarity with military concepts of operations

  • Domain knowledge of commercial and/or military net-centric wireless communications waveforms & protocols

  • Acquainted with radio performance standards (military, commercial, FAA)

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: R13849
Job Location: Cedar Rapids, IA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Possible
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Military Communications (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Project:



  • The Mission Systems Organization provides integrated communications systems for E6-B, E-4, B2 missions. The system is subject to continuous change as networking and communication technologies evolve.


 


Job Summary



  • We are currently searching for a Senior Systems Engineer to join our team in Richardson, Texas.

  • Typical responsibilities may include leading the technical design and development of other systems engineers, working with the Engineering Project Manager to create and maintain estimates of schedule and budget, and participating as a member of bid team to provide input on effort estimates for proposals of small to medium complexity. 


 


This Senior System Engineer will support these system updates, enhancements, and expansions by:



  • Capture, analyze, decompose, model and create requirements for systems, product or sub-systems of moderate complexity.

  • Conduct verification/validation testing for products and subsystems of moderate complexity and contribute to system integration.

  • Contribute to the development of functional, interface and performance specifications for hardware and software implementation. Contribute to architecturally significant requirements and technical risk area identification.

  • Create and run verification and validation tests for products and sub- systems of moderate to high complexity.

  • Perform trade studies and make value engineering decisions. Defining system architecture and interfaces between internal and external systems. 


 


Required Experience:



  • Candidates must have a minimum of 5 years of system engineering experience performing system engineering in the following areas:

  • Architectural changes and customer-driven enhancements to complex systems.

  • Complex systems typically involved airborne, ground and other systems. 

  • Analyzing performance of complex systems. 

  • Eliciting and managing customer requirements.

  • Experience working in a highly integrated team environment with software, hardware, and mechanical engineers

  • Experience in requirements management tool(DOORS, etc) and SYSML language(EA, NoMagic, etc)


 


Basic Qualifications:



  • US Citizenship

  • Ability to obtain a DoD Security Clearance

  • Experience with all phases of the system development life cycle

  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline


 


Desired Experience:



  • MS in System Engineer


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 


 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: R13802
Job Location: Richardson, TX
Rate: 70-80
Per Diem: Yes, Split
Overtime: Possible
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineering Specialist

Description:
Do you have 10 years of engineering experience? Do you have knowledge and experience working with simulating systems in Matlab and Simulink? Apply to become a Systems Engineering Specialist with one of our top clients in the aerospace industry today!

The ideal candidate for this position will perform the following tasks:
* Responsible for engine and transmission system performance modeling, vehicle performance modeling, and component performance modeling.
* Responsible to allocate and derive requirements from vehicle, engine, and transmission system level down to the component level using a systems simulation model in Excel, Matlab, Simulink, or other software.
* Technical lead of cross-functional matrixed project team (ME, EE, Software, etc.) for engineering projects through the Systems Requirements Review to ensure engineering requirements are met.
* Mentor and trainer of other engineers for Systems Engineering related simulations and activities.
* Improve and document the L3 Systems Engineering Process with processes, document templates, or modeling standards.
* Author engineering technical reports for submission to the customer.
* Participate or lead new engine and transmission proposals.
* Provide input to product specifications and design verification test plans to ensure that they adequately captures all data to assess requirements compliance.

Mandatory Qualifications and Experience:
* Bachelor's degree in Systems Engineering, Mechanical Engineering, Electrical Engineering, Physics, or equivalent technical BS degree with 10-14 years engineering experience.
* At least 2 years experience working as a Systems Engineer (10 years engineering experience overall).
* Experience with simulating systems in Matlab and Simulink.
* Knowledge of transmission, engine, and vehicle performance and understanding of powerpack integration into vehicles.
* Engineering knowledge of mechanics; hydraulics; powertrain parts such as gears housings, and shafts; knowledge of performance parameters such as speed, RPM, torque, power and gear ratios.
* Ability to obtain a security clearance.
* Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment.

Desired Qualifications and Experience:
* Master’s degree in Systems Engineering.
* Experience with Rational Dynamic Object Oriented Requirements System (DOORS) software or equivalent.
* Expert product knowledge of transmissions, engines, and powerpack integration into tracked vehicles.
* An understanding of working with CAD models and programs in Pro E (Creo).
* Experience in developing products for the defense industry.

The ideal candidate for this position will possess the following skills and characteristics:
* Highly organized and able to multitask on many different projects at once.
* Proven ability to make technical decisions, complete project objectives within budget and schedule, and work with little supervision.
* Proven ability to work well with others in a cross-functional environment while working on multiple projects.
* Ability to utilize all Microsoft Office applications including Word, Excel, Powerpoint, and Project.
* Excellent written and verbal communication, and the ability to write and review technical reports.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127851
Job Location: Muskegon, MI
Start Date: 06/18/2018
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer (Secret Clearance)

Description:



Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Overview:



  • As a Senior Systems Safety Engineer, you will help design and develop mission systems products covering all spectrum bands, across multiple airborne and ground platforms.


 


Job Responsibilities:



  • Writes, reviews and approves safety documents in accordance with ARP-4754A, ARP-4761 or MIL-STD-882 including FHA, PSSA, SSA, Development of Hazard and Fault Tree Analyses

  • Completing MIL-STD-882E System Safety hazard analyses, clearly documenting all results for formal report delivery to the customer


 


Basic Qualifications:



  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline

  • Knowledge of MIL-STD-882E (DoD System Safety Standard Practice) and SAE ARP 4761 (Civil Aviation Safety Assessment Guidelines / Methods)

  • Prior experience applying MIL-STD-882E and/or SAE ARP 4761 System Safety assessment techniques in the design of safety-critical products, preferably for military end-users.

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14032
Job Location: Richardson, TX
Rate: 55-65
Per Diem: Yes, Split
Overtime: Some
Duration: 18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tech Data Associate II

Description:
Tech Data Assoc II

Location: Long Beach, CA
Rate:DOE
Shift: 1st

FAA Regulated?: No

Unique Skills:
Document control/data management experience.

Education and Experience Requirements:
High School/GED. Associates degree preferred. High degree of proficiency with office software packages (Word, Excel, PowerPoint). Experience with project planning software preferred. Two (2) years working in an office administrative function supporting data management initiatives. Prior Aerospace experience preferred.

Position Purpose:
Under general supervision, generates basic reports and documents and supports the control and release of technical data. Primary responsibilities include, but not limited to, gathering, organizing, generating, processing and supporting data and information.

Principal Duties and Responsibilities:

Essential Functions: 1. Supports project leaders/management in the creation of data packages/reports and reviews technical data to ensure legibility, verifies accuracy and completeness to proper format and procedures. 2. Utilizing an understanding of technical data, makes recommendations to ensure documentation/reports are prepared in accordance with approved procedures. 3. Under direction, exercises creativity and initiative to remove system/process roadblocks to ensure completion of activities within established schedules. 4. Works with internal and external customers to identify, research and resolve data integrity issues. 5. Assists in the development of manuals and training materials for the function. 6. Assists in maintaining and controlling technical data to support internal/external customers and/or document/work packages. 7. Tracks and monitors job status through workflow processes.

Additional Functions: 1. When required, participates on work teams to achieve department goals and improve processes. 2. Maintains a current and up-to-date knowledge of technical developments within the given function/discipline. 3. Performs other duties as assigned.

Other Requirements: 3. Must be able to meet the physical requirements of the job, work is performed in an office environment mostly in a sitting position with infrequent lifting of 10-15 pounds 2. Strong verbal and written communication skills, including ability to present information in a group setting 1. Strong organization and analytical skills to be able to solve process/system problems under general direction
 
Job Number: 9361
Job Location: Long Beach, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer II

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Primary



  • Converts legacy documentation to content management system, specifically Solumina Manufacturing Execution System.


 


Secondary



  • Authors in clear and concise language to develop and prepare process control documentation used to fabricate components/subassemblies/assemblies.

  • Demonstrates excellent writing skills, accurate and concise communication skills.

  • Works to develop new/update existing documentation via interfacing with SME’s, engineering drawings, tracking and validating data from multiple sources.

  • Coordinates with cross-function teams to obtain all necessary input. Has ability to work both independently.


 


Requirements:



  • English or technical writing degree or experience required.

  • Experience with content management system.

  • Strong working knowledge of Microsoft Office software products

  • Strong analytical, written and oral communication abilities. Working knowledge in document preparation, editing, and grammar

  • Understanding of basic engineering principles as well as the ability to read, understand, and interpret engineering documentation such as engineering drawings, and schematic diagrams

  • Ability to work both independently and in cross-functional team environments


 


Preferred Skills:



  • Knowledge of authoring technical documentation in manufacturing execution systems software, preferably Solumina.


 


Manager Notes:



  • Should meet minimum req'ts outlined below.

  • Soft skills will be key (work ethic, quick learner, good fit for team.

  • Interview q's will include: Exp reading drawings?

  • Exp working w/ Eng and converting their instructions into docs?

  • Adept at learning new software?

  • Team joining is ~5 writers, ranging from mid-sr level exp. Will support team of ~30 Engineers.

  • Position open due to surge in workload

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems




 
Job Number: O8270816
Job Location: Elkton, MD
Rate: 30-40
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX Fibersim / composite components for aerospace CA

Description:
161524/17467

Title Temp Airframe Design Engineer

Job Summary

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:
•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications
Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.
Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment.
Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems.
Must be able to work both independently and in a team environment.
Able to work extended hours as required.
A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.

Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.

- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.

- Experience with NX and FiberSIM highly desired

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
SCA Contract? No
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-17467
Job Location: San Diego, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3 (Structural & Mech Testing)

Description:
Please share updated resume at ravi@iconma.com if interested

Test & Evaluation Engineer 3

Location: Mesa, AZ
Duration: 6 months

Primary Responsibilities
- Work in an engineering developmental test lab to design, implement and test structural and mechanical components.
- Develop detailed test procedures, including instrumentation and configuration definition needed to perform the test and minimize risk.
- Design components, sub-assembly and load system hardware and use analytical tools to verify the design with a focus on safety.
- Assist in coordinating the manufacture and assembly of test hardware.
- Review test data for accuracy, quality and fidelity.
- Create test reports for delivery to the customer.

Basic (Required) Qualifications
- Bachelor's Degree or higher is required.
- Direct working experience in the areas of developmental test, automotive or aerospace engineering.
- Unigraphics and/or CATIA experience is required.

Preferred (Desired) Qualifications
- Minimum of 4 years of structural test experience supporting aircraft structures
- Experience with industrial test laboratory environments and procedures
- Experience with structural, mechanical, and dynamic component interrelationships and capabilities
- Experience in a lab environment with data acquisition systems and test instrumentation.
- Experience with MTS AeroPro software.
- Vibration test equipment, fixture design, testing standards end execution of vibe tests.
- Experience with sensors including accelerometers, strain gages, thermocouples, load cells, and microphones.
- Experience with principles of operation of transducers.

Skill Code:
63Z-Structural & Mech Testing
 
Job Number: 18-10021
Job Location: Mesa,, AZ
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3 (Test Instrumentation)

Description:
Please share updated resume at ravi@iconma.com

Test & Evaluation Engineer 3

Location: Mesa, AZ
Duration: 6 months

Job Description:
Work in the engineering developmental test lab to design, develop, setup and operate instrumentation and test control equipment. Develop detailed test procedures & designs for the implementation of hydraulic control and data acquisition systems needed to perform experimental static and fatigue tests on specimen components for qualification & verification. Design & develop test hardware and system from source equipment to achieve test requirements. Analyzes, processes and format data to customer requirements.

Applicant must have a minimum of 5 years of instrumentation experience in the specific areas of instrumentation, hydraulic controllers and data acquisition systems. Applicant must posses direct working experience in the areas of developmental test, automotive or aerospace engineering.

Prefer at least 3 years of direct work experience with MTS FlexTest, MTS Muilti Purpose Test (MPT) Software & MTS AeroPro Test Software. It would desirable if applicant possessed experience with electrical system design layout using AutoCAD or MS Visio software packages.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code:
64C-Test Instrumentation
 
Job Number: 18-10022
Job Location: Mesa,, AZ
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
Seeking an experienced test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


Your Mission
Design tests plans and equipment for validation of complex mechanical or structural components and systems.
Write test plans and procedures to define and support execution of tests.
Interface with internal customers on integrated program teams to establish and verify specific test requirements.
Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
Analyze test data to verify test requirements and write test reports to document test results.
Interface with external test laboratories to facilitate testing for design and analysis teams.
Participate in the test engineering review, approval and release process.
Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.

What you bring
Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
CAD modelling experience – Experience with Catia V5 preferred
Experience with simulation and finite element analysis preferred – NASTRAN, Femap
Experience with DO-160 environmental test standards for mechanical systems
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
Focus on safety and reliability in testing.
Results oriented approach to completing test activities successfully.
Excellent verbal and written communication skills
Excellent Organizational Skills and problem-solving skills
Strong team player.
Excellent computer skills, including Outlook, Word, Excel and PowerPoint


ITAR Requirements
Applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

The Structures Company is an AA/EOE.
 
Job Number: 3893
Job Location: Mojave, CA
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
• Must have direct tool design experience with CATIA
• Large tool design experience is a must (not just small tools).
• Must understand GD&T (not just familiar)
• Must have experience with assembly, fixtures and jigs
• Must have at least 5 years of Aerospace experience and preferably at least 5 years tooling (the more the better since there is the potential for a senior level role)
• Automated tooling experience required to include pneumatics, hydraulics and other moving parts

Top Skills: Large parts design (not just small tools), Catia V5, GD&T

The Structures Company is an AA/EOE.
 
Job Number: 214
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer (Secret Clearance)

Description:

Active Secret Clearance REQUIRED


USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


Highly motivated tool design engineer with experience in tooling for composite structures and assemblies for military and/or commercial aircraft.


Responsibilities will include but are not limited to the design of tooling for composite aerospace part, structural analysis of tools using closed and FEA, support of tool fabrication efforts, tool source inspection and support of proofing operations at Orbital ATK facilities.


 


Experience Requirements:


Minimum of 7 years related experience in design engineering function


Minimum of 4 years of experience with CATIA V5 and/or NX


Previous experience working with large scale aerospace projects


Knowledge of composite materials and manufacturing processes


 


Experience Preferred:


Proficiency with NX, Catia V is desirable


Previous experience with working process, testing or product design engineering for aerospace parts


Requirements definition and verification


Previous experience in aerospace manufacturing facility


 


Education/Certifications:


BS degree in Civil, Mechanical, Aerospace Engineering, or related


 
Job Number: O8089456
Job Location: Clearfield, UT
Rate: 65-80
Per Diem: Yes, Split
Overtime: Yes, 20+ hours/week
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer I CATIA V5 ( Clearfield, UTAH ) S8089456

Description:
Tool Design Engineer I CATIA V5 ( Clearfield, UTAH ) S8089456
12 Month Contract

Pay Rate: $ 50-60 /hr W2, maybe more for the right person.

• MUST HAVE AN ACTIVE DoD SECRET LEVEL SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE

Highly motivated tool design engineer with experience in tooling for composite structures and assemblies for military and/or commercial aircraft. Responsibilities will include but are not limited to the design of tooling for composite aerospace part, structural analysis of tools using closed and FEA, support of tool fabrication efforts, tool source inspection and support of proofing operations at Orbital ATK facilities.

Top three skills:
• MUST HAVE AN ACTIVE DoD SECRET LEVEL SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE
• BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 7 years related experience in design engineering function
• Minimum of 4 years of experience with CATIA V5 and/or NX
 
Job Number: S8089456
Job Location: Clearfield, UT
Rate: 60
Per Diem: split
Overtime: Poss
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer (4 needed)

Description:
The Tooling Engineer is responsible for clarity, standard conformity, interface compatibility, dimensional accuracy, and ease of manufacturing for all checking layouts and drawings, including advising management of potential tooling issues.

Essential Functions:
1. Checks completed layouts and drawings for: clarity, completeness, conformity to standards, procedures specification, critical interface compatibility, producibility aspects, dimensional accuracy of calculations and geometric tolerancing.
2. Investigates design factors such as ease of manufacturing, availability of materials and equipment, interchangeability; replaceability, strength – weight efficiency.
3. Examines designs for proper application of geometric dimensioning and tolerancing (GD&T), conducts analysis of tolerances to ensure correct assembly fits.
4. Advises the Manager/Supervisor of Tool Engineering regarding all tooling related matters of significance which impact, or have potential to impact, the Manufacturing responsibility.
5. Recommends changes to existing tool designs related to cost reduction or obsolescence.
6. Must have experience with assembly, fixtures and jigs

Requirements:
1. Bachelors Degree or equivalent experience
2. 10+ years of tool design experience
3. 5,000+ Hours of Catia V5 experience required
4. Teamcenter engineering

Knowledge, Skills and Abilities:
1. Broad knowledge of aerospace tooling and fabrication processes.
2. Strong Knowledge in the use of GD&T per ASME Y 14.5 Standard.
3. Strong oral and written communications skills.
4. Working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
5. Experience working in SAP and TcE strongly preferred.
6. Thorough understanding of blueprint reading.
7. Prior drawing generating and checking experience is preferred.
 
Job Number: 28-025
Job Location: Greensboro, NC
Rate: up to $55
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designers - Catia V5

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan.
Catia V5
1+ year(s) experience using Enovia
6 months experience in fixture fabrication
experience with hydraulic/pneumatic design

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-MT-Tool
Job Location: Helena, MT
Rate: $52.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 5 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Upholstery Tech II

Description:
Unique Skills:

Able to cover mid-cabin interior parts such as, overlays, cabin, lavatory, entry headliners, and dado panels. must have some computer skills


Education and Experience Requirements:

High School Diploma/GED. Two (2) years experience using commercial sewing machines, sergers and/or various hand tools used in upholstery and carpet trades. Experience in aerospace industry preferred.

Position Purpose:

Under minimal supervision fabricate and install upholstery, cover panels, and make simple patterns for aircraft interiors using design/engineering drawings and aircraft specifications.
 
Job Number: 23-DAL
Job Location: Dallas, TX
Rate: 24.18
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEK PROFESSIONALS INC
Attention: Chris
Address: 103 CHESLEY DR STE 207
City, State: MEDIA, PA 19063
Phone: 610/534-8701
800 Phone: 877/271-1799
Fax Phone: 610/534-8697
Website: www.hitekprofessionals.com

Back to Advanced Job Search