Job Search Results

268 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 11:23AM Pacific Time by ContractJobHunter. )

Listings 1 - 268

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Antenna/Radome Electrical Engineer

Description:
Job Title Antenna/Radome Electrical Engineer
Location Baltimore, MD
Job Number 633/1543
Residency US Citizens Only
Clearance Active Secret
Duration Permanent Full Time
Pay Rate $105-115k
Per diem Not Available
Overtime Unknown details at interview
Shifts Every other Friday off (9x80 shift)


We are seeking an Electrical Engineer who specializes in antenna and radome design (and specification creation), measurement, development, test troubleshooting, and production.



Candidate will be involved in every facet of antenna work including preparing (and technical writing) of proposals, presentation of proposals to clients and internal staff, working through concept designs, materials and cost analysis, reporting and answering questions from clients and fellow stakeholders.



Required:
*6-10 years working as an antenna or radome engineer.
*Aerospace or RF antenna industry working in the Microwave (GHZ) frequency range
*Active Secret Clearance; US Citizens only may apply.

*Familiar with preventive maintenance schedules for anechoic chamber test equipment.
*BS degree in engineering or physics



Plus:

*Active Secret Clearance
*Experience with electromagnetic CAE tools such as HFSS and FEKO
*Knowledge of Orbit/FR positioning equipment and Keysight network analyzers.
 
Job Number: 633
Job Location: Baltimore, MD
Rate: $105-115k
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Certification Engineer - Norther California

Description:
About the Job
Our client is looking for engineers experienced with civil aviation certification to join our growing team. This role will serve as an internal Subject Matter Expert as well as a primary external point of contact with regulatory agencies and industry standards groups for aircraft, system, and equipment-level aspects of avionics and electrical systems and equipment.

Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits at job site are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.
 
Job Number: t3255
Job Location: CA
Rate: Open
Duration: Direct
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cockpit Systems Engineer

Description:
The Systems Engineer, Cockpit Avionics will be responsible for some or all systems related to:
• System 23 – Communication
• System 31 – Indicating and Recording Systems
• System 42 – Integrated Modular Avionics
• System 45 – Central Maintenance Systems
• System 46 – System Integration and Display

***Systems Engineers MUST HAVE experience with a direct design role in a program that has certified a new aircraft***

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working knowledge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 376
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Engineer / Developer

Description:
Seeking a talented and motivated Avionics Software Engineer to join our Avionics Team.
MUST BE US Persons.
The ideal candidate will have experience with software development programs in aerospace or similar field. We are looking for someone who enjoys working in an embedded software environment, with an emphasis on safety-critical aerospace projects.

Required Knowledge/Experience
• Experience with aerospace software projects
• Experience with C and C++ embedded software
• Experience with bare metal and RTOS software
• Experience with VHDL and/or Verilog
• Experience with GLStudio or opengl based display frameworks

Desired Knowledge/Experience
• Experience with VxWorks
• Experience developing software for DO-178 certification
• Experience with softcore processors and system-on-chip
• Experience with VHDL and/or Verilog
• Experience with the Atlassian software project management suite including JIRA, Bitbucket (Git), Confluence, and Crucible


Responsibilities
• Develop and maintain avionics software applications through the complete software lifecycle
• Actively participate in code reviews, requirements development, internal audits, and other software-related development activities
• Monitor program performance after implementation to prevent reoccurrence of program problems and ensure efficiency of operations
• Participate in risk management meetings

Educational Requirements:
Must have a Bachelor of Science degree in Software Engineering or a related engineering discipline from an accredited university, or equivalent combination of work experience and education

Professional Requirements:
• 4 or more years of software development programs in aerospace or similar field
• Experience with safety critical embedded system hardware and software
• Experience with real-time operating systems
• Strong foundation of fundamentals of electrical engineering
• Strong organizational and written communication skills
• Applicants must be U.S. persons as defined by the ITAR


The Structures Company is an AA/EOE.
 
Job Number: 406
Job Location: Mojave, CA
Rate: ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Systems Engineer

Description:
This position guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services. For more information please read on.

#Essential Functions:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Is consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
* Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
* Perform other duties as assigned.

#Qualifications:
* Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
* 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
* Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
* Advanced degree in engineering, or related curriculum preferred
* Avionics development and integration experience required.
* 25.981 analysis experience preferred
 
Job Number: 132423
Job Location: Savannah,, GA
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer - Avionics and Electrical

Description:
Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.



The Structures Company is an AA/EOE.
 
Job Number: 379
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Control Systems Engineer

Description:
Tasks include analysis and testing of aircraft handling qualities, design of control laws, and development of simulation math models. This engineer will perform analysis and evaluation of total air vehicle stability and control characteristics to ensure acceptable handling qualities in compliance with specifications; apply control theory to the design of control laws that achieve desired characteristics for dynamic control response, gust or disturbance rejection, system failure robustness, and loads considerations; develop and validate both linear and nonlinear mathematical models of air vehicle and subsystem dynamics; and will use simulation and flight testing, including planning, data analysis and interpretation of test logs, to define handling qualities.
Qualifications
• B.S. + 3 years of experience, or M.S. in mechanical engineering, electrical engineering, aerospace engineering, computer science, or a related field
• Knowledge of aircraft flying qualities, flight dynamics, piloting control strategies, and flight control systems
• Proficiency in C/C++ desired
• Proficiency with MATLAB/Simulink desired
• Digital signal processing and controls education and/or experience desired




The Structures Company is an AA/EOE.
 
Job Number: 384
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Must be comfortable with Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
 
Job Number: 12463
Job Location: Fort Worth, TX
Rate: $65.57/HR
Per Diem: Split Possible
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Seeking an experienced electrical engineer to take ownership of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.



The Structures Company is an AA/EOE.
 
Job Number: 399
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.
Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes high voltage systems to drive BLDC motors and low voltage systems to control key elements of the avionic and vehicle management systems. It is desired for the candidate to specifically take ownership of analog & digital circuits (MOSFETs, op-amps, switching regulators, gate drivers, microcontrollers, SPI, I2C, etc) for high power BLDC drive motors as other systems such as electro-mechanical actors. The candidate will participate in initial equipment conceptual development and carefully balance product specifications, process requirements, and lead-time limits. The engineer will define key requirements and take ownership of them through the design life-cycle.
Do: The Electrical Design Engineer will also take the lead designing a myriad of critical components that are the basis for the Butterfly Aircraft’s electrical propulsion systems. Areas of focus include BLDC motor drivers and the associated electrical components. The end application will require extreme levels of reliability and fault tolerance and therefore the systems and components designed by the electrical engineer will need to adhere to aerospace best-practices for flight critical vehicle management systems. Familiarity with DO254 and DO178 is desired. The ideal candidate will have a hand in developing new systems from the ideation stage and seeing them through to a flight-worthy component. Thus, the role will require experience designing, prototyping, and testing multiple iterations of the development PCBs and be competent in the skills and tools needed to undertake this effort.
Key Responsibilities:
• Start-to-finish hardware ownership: Specification, architecture, design, simulation, schematic, layout supervision, prototype, validation, and manufacturing of circuit boards. Thoroughly document design requirements, calculations, power budgets, validation results, etc. Rapidly iterate as design requirements and system features mature.
• Circuit board design: Develop the specification, architecture, and design of electronic circuits for motor control including consideration of processor requirements and integration, system timing and bus loading. Work hand in hand with the embedded systems lead and software counterparts to ensure success of the integrated system. Design hardware, source components, develop schematics, manage layout, and test prototypes to validate hardware.
• Testing and validation: Identify core test requirements and balance test time with test coverage. Interact with various design, manufacturing, and firmware teams throughout the project. Establish clear, concise hardware test plans, and identify necessary test sequences and functional verification testing.
Secondary Responsibilities:
• Establish great working relationships with team members and cross functional teams.
• Create electrical panel schematics and work closely with builders to checkout wiring and quickly correct mistakes.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. Aerospace, Electric Vehicle development, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow engineers.
Required Qualifications:
• Master’s degree from an accredited university in Electrical Engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. electric vehicle development); or equivalent experience/combined education.
• Excellent circuit board design skills and an analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Experience in PCB schematic creation.
• Experience in electrical equipment selection and hardware integration/abstraction.
• Experience in electrical panel design and layout.
• Competent in electrical fundamentals.
• Familiarity with C, C++, Python, and/or Labview
• Well versed in the fundamentals of serial communication protocols (CAN, LIN, Ethernet, Bluetooth, DP, etc.)
• Experience with designing and testing to meet DO-160 Environmental Qualification requirements is desired.
• Experience with HW design that meets certification requirements for lightning strike and HIRF is advantageous.
• Experience overseeing and/or preparing electrical system compliance test plans and reports in support of aircraft certification, along with direct experience working with the FAA and/or FAA DERs, or past experience as an FAA electrical systems DER would be highly desirable.
 
Job Number: t3262
Job Location: Southern, CA
Rate: $55-$70/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - Aerospace

Description:
Electrical Design Engineer with extensive Mentor Graphics design experience.
 
Job Number: EDE-001
Job Location: Working Remotely
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 6 mo
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer Secret Clearance

Description:
Job Title Electrical Design Engineer Secret Clearance
Location Lexington, KY
Job Number 433/1927
Residency US Citizens Only
Clearance Interim Secret
Duration 1 Year or more
Pay Rate $35-48/hr
Per diem Yes split available
Overtime Unknown details at interview
Shifts Every other Friday off (9x80 shift)


We are hiring for an Electrical Engineer who will be working on changing and modifying existing aerospace avionics hardware, as well as integrating existing and new components into airborne or terrestrial equipment or systems.



Candidate will be working on developing military specification (SAE, ANSI, ASME) components / system designs based on requirements and interface control documents. After design work is complete, candidate will assist in supporting the fabrication, installation, and integration of the design, helping the manufacturing and installation contractors.



Required:

*3-5 years in Electrical Engineering, creating electrical designs.

*System integration experience.

*Active Interim or Secret Clearance; US Citizens only please.

*BSEE from an accredited University.



Pluses:

*Creating electrical designs of aerospace systems, wiring harnesses, components or other electrical equipment design.

*Familiar with Aircraft systems (like LRUs)



Benefits:
*Five medical plans to choose from
*Optical and dental plan offerings
*Direct deposit payroll
*Overtime paid at time and 1/2 over 40 hours
*Per diem may be available for out of town contractors
 
Job Number: 433
Job Location: Lexington, KY
Rate: $35-$48 DOE
Per Diem: yes/split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Inconen is looking for an Electrical Engineer in for our client, a well-known Aerospace Company, in Lexington, KY.

****Candidates must have an Active Secret Clearance or to have had one within the last 2 years. An Interim clearance is acceptable to start.****

Description:
1. As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY.
2. The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.
3. Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information.
4. Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
5. Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
6. Requires a BSEE from an accredited University.

Education:
1. Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11310
Job Location: Lexington, KY
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/03/2021
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Active secret clearance preferred, however an interim clearance is acceptable to start.


As an Electrical Engineer, the selected contractor will work as part of an engineering team based in Lexington, KY.

The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.

Contractor's responsibility will be to develop component and system designs based on customer requirements and interface control documents or other similar information. Contractor's designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.

Upon design completion, contractor will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.

Education: requires a BSEE from an accredited University.



Please send resumes to Becky Norman @ bnorman@butler.com. Phone number is 469-785-4744.


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57593
Job Location: Lexington, KY
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: July 2020
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The engineer also designs other tools to support Power Testing, Real-Time Operational Testing, CAN/1553/GbE/UBIM Testing, User friendly LabVIEW application S/W to control VXI, PXI, PCI, and GbE instruments, GO, NO-GO and Failure Area indicators, Electronic Personality Interface Adapters and high density common interfaces for quick change of LRU on test console.
 
Job Number: 48553
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Release Comments: Electrical Engineer - Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer
 
Job Number: 132470
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Valerie White
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Fort Worth, TX
Duration: 12 months

Description:
Client is seeking a Circuit and FPGA Design Electrical Engineer with experience in PCB design to join our team.

In this position the engineer will design and develop complex electronic hardware systems for aircraft. A major focus of this mission critical engineering role will involve developing aircraft electronic systems. The engineer will be responsible for Circuit design, Field Programable Gate Array (FPGA) programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) designs working on a cross functional team. Working on a cross functional team the engineer will be working with mechanical and software design teams to develop a complete qualified flight tested aircraft solutions.

The engineer will have an opportunity have an impact on the following areas: Requirements analysis/derivation, concept development, hardware architecture, component selection, schematic capture, reliability analysis (derating, thermal, signal integrity, power integrity, stability, overstress), design verification, system integration, and qualification.

Basic Qualifications:
- A BS Degree in Electrical Engineering or closely related technical field or equivalent experience/combined education
- Experience with circuit design concepts
- Experience in circuit analysis, troubleshooting, test instrumentation, and data analysis tools
- Experience with Printed Circuit Board (PCB) board design and Circuit Card Assembly (CCA) design
- Experience with VHDL, Verilog, or System Verilog languages to support FPGA firmware programing
- The technical ability to effectively define and interpret system level requirements and derive the requirements necessary to interface between lab and hardware
- The ability to work well in a teaming environment with other disciplines (Systems Engineering, Software Engineering, Mechanical Engineering, etc.)

Desired Skills:
- Experienced using Xilinx and/or Microsemi FPGAs
- Experienced with design and simulation tools (Xilinx Vivado, Microsemi Libero, Mentor QuestaSim)
- Experience with Perl, Visual Basic, and C/C++,
- DO 178C/254 verification
- High Speed and RF design
- Cadence schematic capture, PCB layout Allegro

Comments for Suppliers:
Electrical Engineer - Circuit Design, FPGA Firmware Programing, and Printed Circuit Board (PCB) and Circuit Card Assembly (CCA) Designer

Level:
Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 20-06504
Job Location: Ft. Worth, TX
Per Diem: split
Overtime: possible
Duration: 12 months
Start Date: 7/1/2020
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Vandenberg AFB, CA
Duration: 8 months

Description:
Facility Systems Electrical Engineer - Member of the Engineering and Infrastructure department whose responsibilities include the design, operation and maintenance of ground (fixed and portable) electrical power systems used at all client Sites.

Assignments will include electrical engineering support of, but not limited to:
- Design, operation, maintenance of medium and low voltage electrical power systems supporting launch complexes and related facilities, including circuitry, cabling, electrical components, instrumentation, and controls
- Assist technical staff and contractors in the design, operation, and maintenance of new/existing electromechanical systems, including insight into the mechanical operation of these systems
- Develop new and revise existing operational test procedures and maintenance documentation associated with launch facility electromechanical systems, primary and backup power (medium and low voltage (12kV, 480V, 120V, 24V control, etc.) systems
- Coordination of Base High Voltage supply infrastructure and readiness in support of Launch Operations
- Design, operation, maintenance of Programmable Logic Controllers (PLCs), or similar firmware controllers, supporting launch complexes and related facilities
- Support development activities for new upcoming launch systems, customer funded special studies, mission unique modifications, or other major facility modifications and/or system upgrades
- Disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions and drive strategic improvements relative to launch operations
- Apply technical engineering knowledge and expertise in the completion of all aspects of an identified project including technological considerations, cost/financial considerations, administration and schedule management
- Develop and coordinate technical portions of proposals, statements of work and contract specifications. Apply knowledge of regulatory and certifying agency requirements to ensure product and/or service is in compliance. Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations
- Must understand and comply with (EWR 127-1) Range Safety design and operational requirements in performance of duties
- Support maintenance and improvement projects in close coordination with Operation Systems Engineering group to ensure system readiness in support of launch vehicle processing

External Basic Requirements:
- Bachelor’s Degree is required (Electrical Engineering degree is preferred), will consider Mechanical or Aerospace Engineering Degree with equivalent real-world work experience.
- AT LEAST 2 years of experience working electrical/power engineering in an Aerospace, Utilities, or similarly complex environment. A Master’s Degree in Electrical Engineering may be used to satisfy 2 years of experience.
- Excellent communication, writing and oral skills and have the ability to work with a wide range of team members including customers and subcontractors
- Proficient knowledge in Microsoft Office products such as Excel, Word, Power Point and Project
- Experience with Computer Aided Design software such as AutoCAD, Revit, and Tekla
- Work will primarily be in an office type environment, with some field operations and maintenance support (launch pad and processing facilities) involving certification for working at height, working in confined space, and working in areas of stored hazardous rocket propellant commodities and high pressure gases.

External Preferred Qualifications:
- Professional experience working with large, complex mechanical systems in an equivalent industrial process is preferred
- Knowledge of industry standards such as National Electrical Code NFPA 70, NFPA 70E

Requires a bachelors degree and 0-4 years of experience (for external candidates only). Provides solutions to a wide range of difficult engineering/scientific problems. Solutions are imaginative, thorough, practical, and consistent with organization objectives. Contributes to the completion of specific programs and projects. Failure to achieve expected results would typically result in serious project delays. Works with minimal direction. Independently determines and develops approaches to problems. Work is reviewed upon completion for adequacy in meeting objectives. Receives guidance only on unusual or complex problems or issues.
 
Job Number: 20-06541
Job Location: Vandenberg AFB, CA
Per Diem: split
Overtime: possible
Duration: 8 months
Start Date: 6/30/2020
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

Electrical Engineer II

Description:
Creo, new product design; PCB design, layout, and fabrication
 
Job Location: South
Input Date: 11/23/2020
Email: epetersen@pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( Chandler, AZ ) 9899904

Description:
Electrical Engineer III ( Chandler, AZ ) 9899904
12 Month Contract

Pay rate: Open

Note: Active Secret Clearance Required

Experience in one or more of the following areas:
a) Ionizing radiation effects analysis & test for electronics systems
b) material science with emphasis on x-ray interactions with matter
c) electromagnetic effects (cable coupling, transient prediction/mitigation) from radiation (ionizing and non-ionizing radiation). Should be familiar with computational tools for modeling and prediction of effects.

Preferred Qualifications:
Preferred advanced degree (MS minimum) in physics, electrical engineering, material science, or mechanical engineering. Active Secret Security clearance or Top Secret is highly preferred

High dose rate (radiation) analysis and test (MIL-STD-883), computational FTDT methods, electromagnetic testing (MIL-STD-464/MIL-STD-461), familiarity with nuclear weapon effects, experience in testing/analysis of natural space radiation environment (TID; MIL-STD-883, SEE; JESD57/ASTM F1192), EEE part selection for aerospace systems, x-ray/gamma/beta/ion transport analysis.
 
Job Number: 9899904
Job Location: Chandler, AZ
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer III ( San Jose CA ) 10166279J

Description:
Electrical Engineer III ( San Jose CA ) 10166279J
12 Month Contract

Pay rate: Open

Company is seeking an experienced Principal Electrical/Digital Design and Verification Engineer. This position requires experience applying engineering techniques to develop and test FPGA HDL logic for systems of significant complexity and scope. Experience with Xilinx and Micro Semi FPGAs and associated IDEs are desired.

Candidate shall be capable of:
1. Designing HDL code written in VHDL and Verilog.
2. Implementing robust clocking architectures
3. Implementing robust design timing constraints
4. Using simulation as a mean of verification
Familiarity with the Mathworks HDL coder is a plus
 
Job Number: 10166279J
Job Location: San Jose, CA
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers

Description:
STS Technical Services is hiring Electrical Engineers in Lexington, Kentucky.

Job Duties:
As an Electrical Engineer, you will work as part of an engineering team based in Lexington, KY.
The team is focused primarily on modifying existing hardware and integrating components into various platforms based on customer specifications.
Your job will be to develop component and system designs based on customer requirements and interface control documents or other similar information.
Your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
Upon design completion, you will be expected to support the fabrication, installation, and integration of your design by providing support to the manufacturing and installation workforce as required.
Qualifications:
Requires a BSEE from an accredited University.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

#ZR
 
Job Number: 34947
Job Location: Lexington, KY
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Rachel Hood
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Manufacturing Engineer

Description:
****Candidates must be U.S. Citizens****

Job Description:
The ideal candidate will be creative, energetic, flexible, possess a positive attitude and be eager to apply and expand their engineering skills in a highly ethical manner while supporting the Integrated Product Development Team model in which he or she will have overall accountability to ensure products are manufactured to meet engineering requirements, program budgets, and program schedules through performing the following specific activities:
1. Mentor Manufacturing Engineering associates on instilling a Design to Cost mind-set and work to stream line the delivery of manufacturing assembly documentation as well as its use by our lab personnel.
2. Develop the specific methods and instructions for manufacture and/or assembly of products.

Determine manufacturing feasibility to:
1. Identify potential fabrication problems.
2. Draw attention to special fabrication requirements.
3. Ensure the latest developments in manufacturing technology are considered in the design phase.
4. Establish design inherent cost targets which reflect hardware target cost.
5. The Manufacturing Engineer works with the design team to insure that the proposed design is within the allowable cost.
6. Participate in cost proposals by estimating Manufacturing Engineering tasks, tooling costs and developing manufacturing plans.
7. Establish touch labor cost targets on shop/lab activities as requested.
8. Define tool and gage requirements.
9. Provide the necessary input and support to the tool design group.
10. Ensure adequate tools and gages are available when needed in the process.
11. Work with the Manufacturing Control Planner to establish the schedule for all Manufacturing Engineering and Assembly efforts.
12. Provide support to all activities during the fabrication of the initial unit (first article) of each specific design to resolve processing problems.
13. Review and implement engineering changes to determine feasibility, producibility and delta cost impact.
14. Determine, implement and lead process improvement opportunities, business unit initiatives and corrective actions.
15. Lead efforts to understand non-conformances and reduce Cost of Poor Quality.
16. Lead 3P events, Value Stream Mapping events, and the implementation of Process Certification.

Education / Certifications:
1. BS in Electrical Engineering, Manufacturing Engineering, Industrial Engineering or a Technology Degree.
2. 5+ years of experience required.

Experience/Qualifications:
1. Experience in determining manufacturing methods and writing manufacturing assembly documentation in order to assemble high quality, highly engineered hardware.
2. Background courses in electrical design and/or manufacturing are desired.
3. Knowledge of Lean Manufacturing and special processing, such as IPC-J-STD-001E/ES, NASA-STD-8739.1, and NASA-STD-8739.4, is desirable.
4. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable.
 
Job Number: 12440
Job Location: Windsor Locks, CT
Rate: $48.50/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical systems through all phases of a project, including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Support of production, in-service and flight test activities
• Preparation and presentation of technical data in design reviews
• Preparation and presentation of change requests
• Review and approval of Qualification Test Plans, Procedures and Reports
• Provide support as required in the maintenance and update of the Electrical Test Laboratory
• Provide support as required in other areas of the Electrical Systems group, including cockpit controls and exterior/interior lighting
Qualifications

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical Engineering from an accredited four year college or university program
• 8 years directly related experience involving design, development and certification of aircraft electrical power systems

Knowledge, Skills and Abilities:
• Knowledge of FAR Part 23 or 25 regulations
• Knowledge of advanced electrical power distribution systems preferred
• Knowledge of aircraft communication busses
• Knowledge of RTCA/DO-160, RTCA/DO-178B and RTCA/DO-254 processes
• Knowledge of aircraft wiring practices
Knowledge of aircraft bonding and grounding practices
Knowledge of system modeling tools preferred

The Structures Company is an AA/EOE.
 
Job Number: 372
Job Location: CA
Rate: $65+/Hr. **DOE**
Per Diem: Yes
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12256
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Inconen is looking for a Electrical Test Engineer for our client, a well-known Aerospace Company, in Windsor Locks, CT.

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12457
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/19/2020
Last Updated: 12/09/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Test Technicican

Description:
Description

The manufacturing test technician supports manufacturing in the testing, and failure analysis and resolution, of medium to highly complex electro-optical sensors and assemblies. The candidate would have good knowledge of electrical measurements, and be familiar with using, Meters, Oscilloscopes, Signal Sources, Computers, and other equipment used in the testing of electronic and optical components and modules.
This is a hands-on position that requires a strong ability to work independently, as well as part of a team, to perform electronics testing and analysis of complex electronic assemblies and systems. The candidate must have good hand-eye coordination for work with small tools under a microscope. The ideal candidate will have a solid working knowledge of electronics, and a strong aptitude and interest in working with automated and manual test equipment as well as the communication skills required to work with engineering, management and other technicians. The candidate must be detail oriented and have meticulous record keeping skills.
Communication skills are extremely important as this role includes working with engineering on product introduction as well as training/supporting operators in the group.

Major functions:

Performs set-up, calibration, testing, tuning and troubleshooting of complex electro-optical circuits and components, instruments, mechanical assemblies and test stations. Will require use of a microscope and small tools as well as mechanical hand tools.
• Recognizes failures, and test set up problems, and determines appropriate corrective action.
• Operates a variety
Technical/Functional skills:
• of programmable test equipment (i.e. oscilloscope, function generator, meters, power supplies, etc.)
• Works from written and verbal instructions, test specifications, wiring diagrams and schematics.
• Records and maintains test data and assembly travelers.
• May assist more experienced technicians with more complex test procedures.
• May interface with Engineering to help solve design problems.
• Requires fully proficient job knowledge/skills.
• Preferred 2 years post-Secondary/AAS degree in Electronics or Electro-mechanical Technology with a minimum of 2 years prior related experience, or military equivalent. Minimum requirement, High School Diploma or equivalent, and a minimum of 6 years of prior relevant experience.
• Must have thorough understanding of electronics theory/measurements.
• Ability to work with small hand tools and use microscope.
 
Job Number: 132471
Job Location: Mason, OH
Rate: 26.50
Overtime: Possible
Duration: One Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Kerry Moreland
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Mechanisms

Description:
The Engineer will be designing mechanisms, rotor hubs, actuators, gear boxes, drive systems, etc. All of the design work will revolve around moving parts and mechanisms. This person must also have lead experience and be comfortable in a lead role.

Seeking an experienced design engineer to take ownership of structural analysis of several key components. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Generate conceptual layouts for critical systems. This includes rotor blade retention components, mechanical control systems, electro-mechanical actuators, transmissions, and electric motors/shafting. Define key requirements and take ownership of them through the design life-cycle.
Do: The Mechanical Design Engineer will also take the lead designing a myriad of critical components and primary structure. Areas of focus include propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include the relevant design artifacts (specifications, interface drawings, layout drawings, datum files and CAD assemblies, tolerance stack-ups, detailed drawings, etc). The ideal candidate will be highly versed in 3D CAD (Dassault 3DExperience preferred) and will also be responsible for conducting sizing of the components he or she develops. This will require working knowledge of aerospace sizing methodologies and experience running finite element models. In addition, the role will require the mechanical design engineer to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Bachelor’s degree from an accredited university in mechanical/aerospace engineering or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one); or master’s degree from an accredited university and at least 3 years of professional experience or equivalent experience/combined education.
• Excellent mechanical aptitude and analytical mindset with a track record of demonstrated success developing actual products in a development environment.
• Highly experienced in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar and generating detailed drawings, which are in accordance with ASME Y14.5-2009 standards.
• Familiar with finite element analytical tools such as Hyper-Mesh pre-processors integrated with Optistruct or Nastran, ANSYS or similar.
• Deep knowledge of common aerospace materials and standard hardware selection is a must. Experience with light weight structures and composites is also highly advantageous.
• Experience designing critical structural components, which have been sized for static strength, stiffness, fatigue, or a combination thereof. Knowledge of kinematics is also desired.
• Experience supporting ground and flight testing of complex systems as well as running sub-scale proof of concept testing such as coupon programs or prototype test rigs.
• Versed in gear and bearing design as well as lubrication systems, and the design of common housing features such as lugs and bolted joints.
• Familiarity with component and sub-system FAA certification testing is a plus.
• Past experience as a design supervisor, or leading a team and/or mentoring others, formally or informally is an advantage.



The Structures Company is an AA/EOE.
 
Job Number: 400
Job Location: Southern, CA
Rate: $55-$70/Hr., **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Electrical Engineer (Worst Case Circuit Analysis)

Description:
Summary
Worst Case Circuit Analysis Analyst
Electrical Engineer needed for Circuit Modeling and Analysis using hand calculation and Mentor System Vision toolset.

Analog Circuits:
Knowledge of components and parameters (op amps, transistors, PWM, magnetics, etc),
Examples of circuits to be evaluated: Op Amp circuits, Comparator circuits, DC-DC converters
Analysis techniques: transient analysis, AC stability analysis, stress analysis, power dissipation, noise

Analog Analysis Tools:
Hand calculation in excel/matlab
Mentor System Vision for circuit modeling and sim (Monte Carlo, parametric).

Digital Circuits:
knowledge of components and parameters (memory, processors, clocks).
Examples of circuits to be evaluated: Data bus, clock networks, fpga i/o, digital i/o.
Circuit Analyses may include FPGA: Signal Integrity, Power integrity, Noise margin, logic level compatibility, crosstalk, timing/delay analysis, FPGA timing, Unused pin review, Simultaneous Switching Outputs, Metastability, Power sequencing, Bus Contention

Digital Analysis Tools:
Hand calculation in excel/matlab
Mentor System Vision for circuit modeling and sim (Monte Carlo, parametric).
Hyperlinx
 
Job Number: EE_CA
Job Location: El Segundo, CA
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Saurabh Mehta
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal RF Electrical Engineer

Description:
Summary
Experienced Electrical Engineer needed for on-site RF and/or digital test of circuit card assemblies in a space hardware lab. Looking to fill RF and Digital test roles. Space hardware test experience a plus.

RF Test Engineer:
Required Skills:
• Hands on experience in design, analysis, development, bread‐boarding, troubleshooting and testing of RF circuits
• Depth of experience troubleshooting complex RF systems, modules, CCAs, and components
• Extensive experience with lab equipment including PNAs VNAs, cal kits etc.
Desired Skills:
• Space hardware RF test experience
• Proficiency with ADS/Matlab/MS Excel for data reduction
• LabView/Python skills to enable automated test

Digital Test Engineer Required Skills:
• Hands- on experience testing of FPGA, module, and/or unit in a laboratory setting. He/she will be familiar with latest
• Must be experienced in successful design and test of FPGAs, memory, and industry interfaces, such as Serial Rapid IO, Spacewire, PCIe, Ethernet, I2C, UART).
Desired Skills:
• Space hardware FPGA/Digital test experience
• Proficiency with Matlab/MS Excel for data reduction
• LabView/Python skills to enable automated test
 
Job Number: BCCA294491
Job Location: El Segundo, CA
Rate: $85
Per Diem: No
Overtime: Possible
Duration: 6 months
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Bill Carriveau
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer (Aerospace - Bingen, WA next Hood River, OR)

Description:
Sr Quality Engineering Specialist - Bingen, WA

Job Description:
• Review technical drawings, work instructions, and engineering specifications for manufacturability, inspectability, and assembly.
• Control the quality of materials, products and services supplied to Insitu based on product specifications and design.
• Investigate part issues and perform root cause analysis and resolve product issues using closed loop corrective actions.
• Provide education and coaching to other Insitu departments on quality systems, regulatory compliance and quality initiatives to develop and improve performance and productivity.
• Design and analyze product inspection and testing processes, mechanisms and equipment.
• Provide technical solutions for a wide range of problems through imaginative, thorough, and practical results.
Skills & Abilities Required
• Ability to understand and interpret technical drawings and engineering specifications.
• Proven ability to assess manufacturing processes and make recommendations for improvements to ensure delivery of quality products.
• Proven ability to solve a wide range of difficult problems using root cause/corrective and preventive action standard practice.
• Experience working with ISO quality standards and other Aerospace standards (AS9100, AS9102, AS9103).
• Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.
• Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).

Strongly Desired
• Knowledge of manufacturing processes, materials science, and prototyping techniques
• Knowledge of design and drafting methods including geometric dimensioning & tolerance
• Knowledge of engineering tests techniques, methods, equipment and instrumentation

Desired
• Knowledge of IPC standards (IPC-A-610, Acceptability of Electronic Assemblies, IPC/WHMA-A-620B Requirements and Acceptance for Cable and Wire Harness Assemblies)
• Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog).Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
• Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
• Six Sigma Certification
• Certified Quality Engineer (CQE)
Education & Experience
Technical bachelor’s degree and 5 or more years related work experience or a Master’s degree with 3 or more years. A technical degree is defined as any four year degree, or greater, in mathematics, sciences or technologies.


HOW TO APPLY:
1. REQUIRED: Email resume in MS Word Doc Format: albert.peniche@yoh.com


ALBERT PENICHE
Sr. Technical Recruiter, Engineering/Aviation Division
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: AP001
Job Location: Bingen, Washington State
Rate: OPEN
Per Diem: No
Overtime: Yes
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer II ( Linthicum MD ) 10167058 - Top Secret

Description:
Quality Engineer II ( Linthicum MD ) 10167058 - Top Secret Required
10 Month Contract

Pay rate: Open

!!!! MUST HAVE AN ACTIVE TS CLEARANCE !!!!
On a national security space program (TS-clearance is required!):
1. Perform in-process and final inspections in the Integration and Test work center, and perform data package reviews when needed.
2. Generate and review nonconformance reports for accuracy and detail
3. Participate in PMRB activities and provide input relative to disposition of materials.
4. Assist in developing Root Cause / Corrective Action plans through detailed analysis of nonconformance reports
5. Perform configuration audits to reconcile as-built vs as-designed. Ensure constraints or discrepancies are identified and driven to closure prior to tollgate / milestone activities.
6. Attend readiness reviews as the product assurance lead and provide inputs as required

Prerequisites:
1. Active TS clearance
2. College degree from accredited 4-year institution or 2-year associates degree with plan for completing 4-year bachelor's degree
3. Minimum 10 years experience in either Electrical or Mechanical / Electro-mechanical field of work performing Engineering job function
4. Fluent in use of Microsoft applications and ability to quickly learn new computer programs/applications.
5. Excellent technical writing skills is mandatory.
6. Assignment is at NG factory in Baltimore - willingness to travel to Baltimore daily, or live in that area for 6-9 months.

Desirables:
1. Working knowledge of TipQA and/or Costpoint database applications
2. Knowledge in how to read schematics and wirelists
3. Willingness to travel (though not often) in support of spacecraft level activities.
4. Specific Lean or Six Sigma training from accredited institution.
 
Job Number: 10167058
Job Location: Linthicum, MD
Rate: Open
Per Diem: No
Overtime: yes
Duration: 10 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Electrical Engineer

Description:
Local Candidates to EL Seguno highly preferred

Job Description
Radar Electronics Department needs RF Subsystem Engineer(s). The department resides within the Hardware Engineering Center (HWEC) Center.
We require domain knowledge of RF systems, RF subsystems, Active Electronically Scanned Arrays (AESAs) and associated technologies. AESA technologies are used for military radar, electronic warfare (EW), and communications systems. The department is responsible for the full-scope of antenna product solutions, spanning architecture trades, design, development, integration, deployment, and sustainment of antenna systems and associated integrated system verification solutions.
The RF Subsystems Engineer will be responsible for performing analyses, developing subsystem models including subsystem in system models, and allocating requirements for the antenna, subassemblies and components. The primary role for this individual will support technical analysis, RF system performance predictions, antenna performance predictions, specification allocation and RF subsystem integration and test. Candidates should have experience in the design and development of state-of-the-art antenna and active electronic scanned arrays and RF subsystems for Radar, EW, communications, and/or other antenna systems across multiple platforms.

Required Skills:
•Minimum 6 years of related hardware design experience with at least 4 years of RF systems; Candidates should have experience in the design and development of state-of-the-art antenna and active electronic scanned arrays and RF subsystems for Radar, EW, communications, and/or other antenna systems across multiple platforms. •Proficiency with antenna theory/applications •Knowledge of AESA architectures and beamforming including analog and digital beamforming; RF system and AESA power and control subsystems; RF system integration and characterization. •Proficiency in RF system design, subsystem design, and architectural (functional and physical) trade analysis of antennas, transceivers, receivers, radiators, RF manifolds, and RF devices. •Proficiency with commercial RF system modelling tools, such as Keysight ADS, Keysight Genesys and SystemVue, National Instruments Visual System Simulator, Mathworks Matlab Phased Array System and RF Toolboxes, Mathworks Simulink, AGI STK. •Excellent communication skills. •Occasional business travel is required. •Must be able to obtain a DoD Secret Clearance within one year of start date; Active Clearance is preferred.

Desired Skills: - Experience with AESA integration and calibration
 
Job Number: BCCA295590
Job Location: EL Segundo, CA
Rate: $60/hr.
Per Diem: No
Overtime: Possible
Duration: 5 months
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Bill Carriveau
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Test Engineer

Description:
LOCAL CANDIDATES ONLY

On-site texting in El Segundo requires flexibility to work different shifts to support module test.

Summary
Experienced Electrical Engineer needed for on-site RF and/or digital test of circuit card assemblies in a space hardware lab. Looking to fill RF and Digital test roles. Space hardware test experience a plus.

RF Test Engineer:
Required Skills:
• Hands on experience in design, analysis, development, bread‐boarding, troubleshooting and testing of RF circuits
• Depth of experience troubleshooting complex RF systems, modules, CCAs, and components
• Extensive experience with lab equipment including PNAs VNAs, cal kits etc.
Desired Skills:
• Space hardware RF test experience
• Proficiency with ADS/Matlab/MS Excel for data reduction
• LabView/Python skills to enable automated test

Digital Test Engineer Required Skills:
• Hands- on experience testing of FPGA, module, and/or unit in a laboratory setting. He/she will be familiar with latest
• Must be experienced in successful design and test of FPGAs, memory, and industry interfaces, such as Serial Rapid IO, Spacewire, PCIe, Ethernet, I2C, UART).
Desired Skills:
• Space hardware FPGA/Digital test experience
• Proficiency with Matlab/MS Excel for data reduction
• LabView/Python skills to enable automated test
 
Job Number: BCCA296006
Job Location: EL Segundo, CA
Rate: $60/hr.
Per Diem: No
Overtime: Possible
Duration: 5 months
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Bill Carriveau
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Aerodynamicist

Description:
This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop a highly efficient vehicle design through aerodynamic analysis that is aligned with industry best-practices. This role will have a major role in running all aerodynamic analysis and guiding the design through optimization to produce a compelling end solution.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The aerodynamicist will take the lead analyzing a myriad of external geometries and control surfaces. Areas of focus include blades, wings and fuselage. The core output will be high quality CFD solutions and the resulting CAD surface definitions that can be delivered to the design team to produce Class-A surfaces. Star-CCM and similar CFD tools will be used in support of the design. The aerodynamicist will leverage these to the fullest extent possible to produce valid, high integrity outputs. It is also desired for the candidate to automate these tools to iterate design permutations in a very rapid manner. Therefore, some limited experience with scripting tools such as Matlab, C++, and Python as well as general familiarity with high power computing clusters to manage the job queues will be needed. In certain instances, coupled solution may be required, which would entail working knowledge of structural dynamics and control theory in addition to an expert understanding of the aerodynamic discipline. In addition, it will be necessary for the aerodynamicist to generate custom lifting line tools or similar to help assist in preliminary sizing and basic conceptual development.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in Aeronautical, Aerospace engineering, or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. Formula One); or PhD and 3 years of equivalent experience/combined education. Prior rotorcraft development experience is a plus.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in computational fluid dynamics tools such as Star-CCM (preferred), Overflow and ANSYS-Fluent or similar.
• Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar is also ideal.
• Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or MatLab.
• Well versed in airfoil selection and optimization of custom airfoils through XFoil and other tools is also desired.
• Experience developing control laws with an understanding of vehicle flight dynamics design and analysis with MatLab-Simulink is also advantageous.
• Experience supporting correlating model outputs to actual data produced via wind tunnel and flight test runs. Prior experience with experimental methods and wind tunnel testing is also a plus.
• The job entails using finite volume software and classical analysis to help define aerosurfaces along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.
 
Job Number: t3260
Job Location: Southern, CA
Rate: $70-$90/hr.
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Quality Assurance (SQA) Certification Engineer

Description:
The Software Quality Assurance (SQA) Engineer is responsible for oversight of internal and external (as required) Software/Hardware/Systems Process Assurance by participating in reviews and conducting audits throughout the product development life cycle. Activities are in compliance with Company and regulatory
requirements.

Responsibilities
• Supports and/or leads the development and execution of system/software/firmware quality assurance plans in order to comply with internal and regulatory specifications
• Assures system/software/firmware development process is executed according to internal and regulatory requirements through process audits, reviews and evaluations
• Participates in Planning, Requirements, Design and Coding reviews or audit reviews and their output as specified in the System Process Assurance Plan (SYSPAP)/Software Quality Assurance Plan (SQAP), and/or Hardware Process Assurance Plan (HPAP)
• Participates in the integration and test lifecycle as specified in the SYSPAP/SQAP/HPAP including reviewing or witnesses build and load procedures, audits of test cases and procedures, conduct Test Readiness Review, witness testing, approve transition criteria and conduct Software Conformity Review
• Maintains accurate quality assurance records for assigned projects per the SYSPAP, SQAP and/or HPAP
• Develops software quality metrics and conduct process improvement activities
• Liaison with development and verification engineers as required ensuring requirements are clearly communicated and resulting product meets all requirements.
• Provides support for FAA audits during development projects by way of leading audits, test witnessing and responding to questions/emails
• Provides guidance to development team(s) for certification questions and/or issues

Requirements
• B.S. in Computer Science or Electrical Engineering or a relevant field
• Thorough understanding of FAA Software/Firmware requirements (RTCA/DO-178 and RTCA/DO-254)
• 5+ years of related technical experience
• Familiarity with FAA Designated Engineering Representative (DER) Handbook Requirements (Order 8110.37) and ability to meet (within 12 months) the majority of requirements for Software and/or Airborne Electronic Hardware DER in preparation to become a Company DER
• Responsible for performing job duties in a manner consistent with established Policies and Procedures
• Independently determines and develops approach to solutions. Work is reviewed upon completion for adequacy in meeting objectives
• Frequent inter-organizational and outside company contacts
• Demonstrates understanding and wide application of technical principles, theories, and concepts in the field
• Strong interpersonal and communication skills including writing skills
• Ability to work without supervision. Independent problem solver.
• Works with other disciplines to support goals of the business
• Possesses foresight in identifying future problems and proposes potential solutions to the team (proactive).
• Intermediate Microsoft Office experience

Desired
• Knowledgeable on System Process Assurance requirements (SAE/ARP4754)
• Knowledgeable on FAA Database requirements (RTCA/DO-200)
• ASQ Certified Quality Engineer
• CSQE (Certified Software Quality Engineer)
• Experience utilizing Software and System Quality Assurance specifications such as AS9100, AS9006, AS9115 and ARP4754
• Experience with Jira, Confluence, Polarian, Collaborator and SharePoint
• Experience implementing CMMI program
• Aerospace or Defense Manufacturing experience




The Structures Company is an AA/EOE.
 
Job Number: 386
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: April-May
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced Architect Engineer - Undersea Cable Systems

Description:
A Sr. Advanced Architect Engineer - Undersea Cable Systems job in McLeansville, NC is currently available through Belcan. In this role, you will be responsible for designing, developing, building and testing systems and products based on optic, photonic and laser technologies. To be considered for this role, you will have a Bachelor Degree in Optical Engineering, Optical Science and Engineering, Physics, or Electrical Engineer plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Sr. Advanced Architect Engineer - Undersea Cable Systems Job duties:

* Interact with device, hardware and software design teams to assist in overall development of optical systems which includes: specifying, selecting and qualifying active and passive optical components, developing and benchmarking system performance models, developing and implementing test procedures and/or evaluating and selecting appropriate test instrumentation.
* Recommend technological modifications to the development of new undersea photonic products and/or design changes that improve performance of existing products.
* Participates in electrical and optical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. optical loss, timing, power, etc.), design, integration, and verification of electrical and optical components, equipment and systems.
* Perform root cause analysis for electrical and optical issues, conduct experimental tests, evaluate results to formulate and implement solutions to issues.
* Expected to lead small technical proposals and contribute on medium to large proposals, as a technical writer or basis of estimate author.

Qualifications:

* Familiarity with high-speed transport, including SONET/SDH, GFP, and OTN, at rates up to 10 Gbps at a minimum with experience with higher rates (100G) preferred.
* Direct experience with commercial multiplexing, routing, and switching hardware and routing protocols.
* Familiarity with DWDM transport systems (metro, unrepeatered, or long-haul), and design and impairment analysis of such systems.
* Candidate should have experience in developing requirements and specifications, demonstrated leadership in an integrated team environment and excellent verbal and writing skills.

If you are interested in this Sr. Advanced Architect Engineer - Undersea Cable Systems job in McLeansville, NC, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 302573
Job Location: Mc Leansville, NC
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Aerodynamicist

Description:
Seeking an aerodynamicist to take ownership of the analysis of several key projects. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop a highly efficient vehicle design through aerodynamic analysis that is aligned with industry best-practices. This role will have a major role in running all aerodynamic analysis and guiding the design through optimization to produce a compelling end solution.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The aerodynamicist will take the lead analyzing a myriad of external geometries and control surfaces. Areas of focus include blades, wings and fuselage. The core output will be high quality CFD solutions and the resulting CAD surface definitions that can be delivered to the design team to produce Class-A surfaces. Star-CCM and similar CFD tools will be used in support of the design. The aerodynamicist will leverage these to the fullest extent possible to produce valid, high integrity outputs. It is also desired for the candidate to automate these tools to iterate design permutations in a very rapid manner. Therefore, some limited experience with scripting tools such as Matlab, C++, and Python as well as general familiarity with high power computing clusters to manage the job queues will be needed. In certain instances, coupled solution may be required, which would entail working knowledge of structural dynamics and control theory in addition to an expert understanding of the aerodynamic discipline. In addition, it will be necessary for the aerodynamicist to generate custom lifting line tools or similar to help assist in preliminary sizing and basic conceptual development.
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in Aeronautical, Aerospace engineering, or a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. Formula One); or PhD and 3 years of equivalent experience/combined education. Prior rotorcraft development experience is a plus.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in computational fluid dynamics tools such as Star-CCM (preferred), Overflow and ANSYS-Fluent or similar.
• Proficient in 3D CAD surface definition via 3DExperience generative shape design (preferred), CATIA V5/V6, SolidWorks, or similar is also ideal.
• Working knowledge of scripting and automation tools such as Linux/Bash, Python, C++, or MatLab.
• Well versed in airfoil selection and optimization of custom airfoils through XFoil and other tools is also desired.
• Experience developing control laws with an understanding of vehicle flight dynamics design and analysis with MatLab-Simulink is also advantageous.
• Experience supporting correlating model outputs to actual data produced via wind tunnel and flight test runs. Prior experience with experimental methods and wind tunnel testing is also a plus.
• The job entails using finite volume software and classical analysis to help define aerosurfaces along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.




The Structures Company is an AA/EOE.
 
Job Number: 398
Job Location: Southern, CA
Rate: $70-$90/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Structural Analyst

Description:
Seeking a leader to take ownership of structural analysis of several key projects. This role requires the candidate to thrive in a high paced environment and will have an integral role in advancing the next generation of electrically powered vertical lift aircraft.

Roles and Responsibilities:
Define: Develop structural analysis methodologies that are aligned with industry best-practices and compliance with FAR civil certification standards. Define coupon test programs to establish material allowables and be highly versed in aerospace sizing methods and fatigue methodology.
Lead: Oversee the structural analysis capabilities of a small team and help empower new engineers with best in-class analysis techniques.
Do: This job will be a mix of developing the in-house analysis capabilities of the company, as well as performing as an individual contributor. The senior structural analysis will also take the lead analyzing a myriad of critical components and primary structure. This includes both metallics and composites. Areas of focus include blades, propeller systems and blade retention components, transmissions, gears, bearings, actuators, motors/shafts, and other critically important, dynamically loaded structural components. The work outputs will include structural substantiation packages written to a high level of expertise as well as documentation of flight test limits for the analyzed components. This job may also require the senior structural analysis to support development test efforts (both ground and flight testing).
Intrinsic: The role will require constant flexibility and a level of comfort working in a rapid-prototype environment. The projects and assignments will vary from week to week, so the candidate should ideally have robust experiences to draw from (e.g. aerospace development programs, Motorsport/Formula One) in order to operate effectively in this environment. The role will include interfacing with engineering management, our customers, certification authorities, operations, procurement, external suppliers, and fellow design engineers.

Required Qualifications:
• Master’s degree from an accredited university in a related discipline with at least 5 years of professional experience in aerospace or a related field (i.e. formula one) or equivalent experience/combined education.
• Excellent analysis skills and a track record of demonstrated success analyzing actual products.
• Highly experienced in finite element analytical tools such as Hyper-Mesh pre-processors integrated with Nastran solvers (preferred), ANSYS or similar.
• Well versed in 3D CAD and model setup using 3DExperience (preferred), CATIA V5/V6, SolidWorks or similar.
• Knowledge of fatigue analysis of critical structures using various substantiation methodologies (safe-life, flaw tolerant safe-life, damage tolerance among others) through the full-lifecycle. This includes developing and enforcing component strength limits in order to ensure the structural integrity of the component is maintained through the test and evaluation stages of the program.
• Experience supporting ground and flight testing of complex systems.
• Versed in gear and bearing design, and analysis of these components using tools such as Calyx and Romax. Experience designing and analyzing common housing features such as lugs and bolted joints.
• In addition to structural work, thermal, fluid, and dynamic analysis may be called for.
• The job entails using finite element software and classical analysis to help size dynamic components and select material specifications, along with leading efforts to solve technical problems and providing mentoring or oversight to others. Past experience leading a team and/or mentoring others, formally or informally is an advantage.
• Also desired are candidates with prior experience preparing certification documents for the FAA and direct interaction with a FAA Structural DER.

The Structures Company is an AA/EOE.
 
Job Number: 397
Job Location: Southern, CA
Rate: $60-$75/Hr. **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer, Flight Control - Northern California

Description:
Looking for a passionate engineer that can join our growing team. This is a multidisciplinary position that provides the engineer a chance to interact with many of the key teams within the company. The Systems Engineers will own the architecture, integration, and life-cycle success of a single or multiple aircraft systems, ranging from requirements management, development, certification, and entry into service. Systems Engineers will coordinate between the various departments - Mechanical Engineering, Electrical Engineering, Software, Flight Test, Manufacturing, Operations - as necessary to ensure the technical success of their systems. The Systems Engineers will work very closely with FAA Engineers and DERs to ensure their responsible systems comply with all federal airworthiness regulations.

This position requires a solid understanding of aircraft systems, system development, and industry specific certification processes. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking and thriving in a face-paced environment are highly regarded as well.

The Systems Engineer, Flight Controls will be responsible for some or all systems related to:
• System 22 – Automatic Flight
• System 27 – Flight Controls
• System 76 – Engine Controls
• System 86 – Lift Systems

Responsibilities
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements.
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities.
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects.
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements.
• Generate, review, and approve:
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required.

Required
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications.
• Previous experience with aircraft systems.
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A.
• Working knowledge of DO-160G environmental qualification.
• Excellent problem solving, communication, and technical writing skills.
• Basic knowledge of FAA regulations and guidance material and industry standards.
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred.
• Proficient in English.
• Proficient with Microsoft Office and Google Docs.

Desired
• Working knowledge of electro-mechanical equipment design, including software.
• Previous experience managing complex sets of requirements.
• Previous experience preparing and presenting design reviews for complex, highly integrated systems.
• Previous experience defining system controls, crew indications, and flight manual procedures.
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results.
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred.
• Experience and involvement with industry groups to develop consensus standards.
• 5+ years of relevant industry experience.
• Private pilot certificate or higher.
• Familiar with Dassault Systems engineering and management tools.


POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.
 
Job Number: t3256
Job Location: CA
Duration: Direct
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Electrical Engineer (RF or Digital)

Description:
Summary
Experienced Electrical Engineer needed for on-site RF and/or digital test of circuit card assemblies in a space hardware lab.
Space hardware test experience a plus.
Required Skills:
Hands on experience in design, analysis, development, bread, boarding, troubleshooting and testing of RF circuits
Depth of experience troubleshooting complex RF systems, modules, CCAs, and components
Extensive experience with lab equipment including PNAs VNAs, cal kits etc.
 
Job Number: RF_CA
Job Location: El Segundo, CA
Duration: 7 Months
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Saurabh Mehta
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Technicians

Description:
STS Technical Services is hiring Test Technicians at Aberdeen Proving Ground in Maryland.

Position Overview:

The Test Technician will support senior technicians and engineers in testing vehicles and parts/components, performing configuration changes and repairs of vehicles and test stands, and following appropriate engineering procedures, standards, and specifications. This role may also provide support in the fabrication and assembly of vehicles and related systems/sub-systems. The objective is to validate new product designs as part of new product development as well as resolve issues on sustaining products. The Technician is expected to provide exemplary support technical support to the customers of Oshkosh Corporation and Test and Development.

Essential Duties & Responsibilities:
These duties are not meant to be all-inclusive and other duties may be assigned.
Conduct testing of prototypes and current products to determine capabilities of vehicles/systems and conformance to specifications and/or regulations in partnership with engineers and senior level technicians.
Test and record data using operational knowledge of vehicle systems (electrical pneumatic, hydraulic) using manual entry and data acquisition.
Troubleshoot systems, perform basic failure analysis and follow detailed test procedures.
Assemble, disassemble, and fabricate complex/customized parts, mechanical structures and test stands/fixtures in partnership with engineers and senior level technicians.
Maintain a safe work environment, adhere to all safety procedures during all aspects of job performance which includes regular exposure to personal and physical hazards.
Operate heavy equipment/machinery or drive vehicles as required for the purposes of testing or material handling.
Determine appropriate test instruments for product testing.
Plan and schedule daily activities to complete assignments in their order of priority to make effective use of time and ensure projects are being completed within identified timeline.
Communicate effectively and work cross functionally to resolve technical problems including the ability to provide constructive feedback to all levels of the organization.
Interpret and execute written/verbal directions and instructions.
Important Guidelines:
TSR must follow rules and way of conduct described by client
TSR must report all their activities to the TSL.
TSR must always work in the interest of client.
TSR is responsible of their tools and equipment.
TSR must report immediately any incident or issue to IPS Manager.
Required Qualifications:
Technical Diploma with three (3) years of experience in engineering or equivalent field required.
Knowledge of automotive and mechanical terms.
Ability to read and interpret documents such as safety rules, operating and maintenance instructions, government regulations and procedure manuals.
Ability to adapt to a fast pace environment.
Detail oriented.
Verbal and written communication skills.
Ability to travel 50%.
Preferred Qualifications:
A Commercial Drivers License (CDL) or a Telehandler and AWP operator license
Experience with test and military vehicles
About STS Technical Services:

STS Technical Services places Mechanics, Engineers, veterans and technical professionals into contract and direct hire positions across the U.S. We work with some of the largest corporate names in the country, and we have hundreds of opportunities for you to explore! If you have questions, please call 1-800-359-4787. Otherwise, all interested applicants are encouraged to apply directly on this page.
 
Job Number: 35065
Job Location: Aberdeen Proving Ground, MD
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: Recruiting Team
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

Back to Advanced Job Search