Job Search Results

384 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/18 Monday 07:44PM Pacific Time by ContractJobHunter. )

Listings 1 - 384

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AES Mechanical Installation Engineers - Many Needed

Description:
• Experience with avionics and electrical system design to the requirements of CFR 14 Part 23 is desired.
• Minimum 5 years of CATIA mechanical design experience for component and assembly design and drafting is required. Experience with CATIA V6 is preferred.
• Strong computer, written and verbal communication skills required.
• Time management skills are required to work multiple concurrent projects of various size and scope.
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Visio experience is desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus
• Bachelor of Science in Mechanical Engineering, or Mechanical Engineering Technology from an ABET accredited institution is required.
• Prepare engineering drawings for the installation of avionics and electrical equipment and wire harnesses using computer based drafting tools (CATIA).
• Perform analysis requiring frequent application of engineering principles
Email resume to: mmccarthy@pdstech.com
 
Job Number: AES-Tex
Job Location: Wichita, KS
Rate: $70.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Instrumentation Design Engineer

Description:
PDS is seeking an Instrumentation Design Engineer for an open position in Wichita, KS.
In your role, you will:

Design, verify, support, and troubleshoot measurement and data systems for flight test vehicles
Create and maintain wiring diagrams for flight test equipment and systems
Document procedures, calibrations, and special instructions to support flight test activities
As our ideal candidate,

You must have a BS degree in Electrical Engineering or Electronic Engineering Technology
You have experience with airborne acquisition systems, including L3, TTC, or Acra (preferred)
You have knowledge of strain gages, telemetry, PCM systems, networking, video and audio systems, wiring diagram drafting, calibrations, and laboratory equipment (preferred)
You have flight test experience (preferred)
 
Job Number: 1910097919
Job Location: Wichita, Ks
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Rick Ingle
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic System Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.

Duties and Responsibilities:
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• DO-160F/G, DO-178B and DO-254 experience required.
• Define, plan, and develop complex systems level requirements to support the avionic systems for the aircraft
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 10 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in requirements management tools such as DOORS
• Experience with PLM Tools such as TeamCenter and SAP

The Structures Company is an AA/EOE.
 
Job Number: 253
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Analyst

Description:
Candidate will provide end-to-end analysis support for the NASA program. Duties include performing component and system performance evaluations (to include requirement analysis) on an avionics systems using modeling, scripting, & simulation tools.

Required: Candidate must have a technical background in analysis using a high-level programming language such as Python, MATHLAB, or similar language. Candidate must be able to interface with the customer as needed. Must possess the ability to clearly express ideas/concepts, perform as part of a team, and be capable of operating in a multi-tasking environment.
Candidate must possess a technical Degree (Engineering, Math, or Computer Science).

This is a full-time position, located in Huntsville, AL.
Will accept both junior and senior candidates (2-20 years’ experience).

Desired: Candidate is desired to have experience with NASA avionics data systems. Course work or experience in analog/digital electronics.
Must be U. S. Citizens
 
Job Number: 19-043
Job Location: Huntsville, AL
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Location: Fort Worth, TX
Duration: 6 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)


****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****


Job Description:
- Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
- Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
- This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team.
- Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
- Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager.
- Must able to travel both domestic and internationally.


Activities include:
- Electronic hardware testing and troubleshooting
- Support Software Development efforts for target hardware
- Review and improve Hardware Specifications
- Work with Suppliers & Engineering during product development lifecycle
- Support of system integration activities
- Development/review of detailed engineering documents for software and hardware release
- Financial analysis of planned team activities
- Development of estimates to complete, development of customer estimates
- Generation of slide presentations in support of customer briefings
- Support development of Supplier Statement of Work & Proposals
- Work closely with Supply Chain Management


Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 10333
Job Location: Fort Worth, TX
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
The ideal candidate will support, perform and manage development, design, integration and test function and project teams of Avionics / Flight Control Systems, including Electronics, SW and Hydraulics.

The candidate will also analyze Product / System designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.
 
Job Number: 1910097227
Job Location: Trumbull, CT
Per Diem: split
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
163995
1334-1 Avionics Engineer
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 2/4/2019
End Date: 9/13/2019

Job Description:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

This position is for an engineer working in the Fort Worth IFG Aircraft Computers Team. Job responsibilities will include supporting development of Avionics Mission Computers on aircraft.
Activities include:
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Review and improve Hardware Specifications
• Work with Suppliers & Engineering during product development lifecycle
• Support of system integration activities
• Development/review of detailed engineering documents for software and hardware release
• Financial analysis of planned team activities
• Development of estimates to complete, development of customer estimates
• Generation of a slide presentations in support of customer briefings
• Support development of Supplier Statement of Work & Proposals
• Work closely with Supply Chain Management
Must be able to work in a fast paced environment and be able to work independently with limited oversight from team lead and manager. Must able to travel both domestic and internationally.

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $62.00 Hourly
 
Job Number: JE-1334-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: no
Duration: 7 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CABLING ENGINEER - DIRECT JOB

Description:
JSG is hiring a Cabling Engineer - Direct Hire for our client in Irvine, CA!

Knowledge, Skills and Abilities:

Specify, design, develop, fabricate, and commission custom cabling for electrical, electro-mechanical, and electronic systems encompassing high voltage and high current techniques and integration with control and data acquisition systems.
Provide detailed specifications and support the procurement of commercial off the shelf cabling products.

Produce and examine drawings, wiring diagrams, specifications and other documentation at all stages in the project from the concept through to full manufacturing, installation, and commissioning.

Support projects with confident knowledge of electrical cabling designed for EMC, safety and reliability.
Manage project documentation in accordance with requirements of the ISO 9001 quality management system.
Liaison with engineers and scientists at different levels deploying new electrical/electronic cabling systems.
Interface with engineers and physicists developing experimental and custom systems.

Required Education:

B.S. in Design/Electrical Engineering or equivalent job experience preferred.
Preferred Education: Knowledge of relevant IEEE or IEC standards is preferred
Software Knowledge and Skills:

Practical knowledge of SolidWorks 3D CAD system.
Hands on experience with CAD systems for creating cable schematics and cabling layout and mounting. Industrial electrical system simulation software is preferred.
Basic knowledge of CAD systems for mechanical design (AutoCAD, SolidWorks).
Practical literacy in MS Word, Excel, Outlook and PowerPoint.
 
Job Number: 371499
Job Location: IRVINE, CA
Per Diem: If Qualified
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CONFIGURATION MANAGEMENT

Description:
JSG has teamed up with a Laser welding manufacturing company and i is looking for G has teamed up with a Laser welding manufacturing company and i is looking for Components/Electronics Sustaining Engineer in Los Angeles, CA!


RESPONSIBILITIES:

Specify and select electronic and electro-mechanical components based on requirements submitted by Cognizant Engineers
Work with purchasing and manufacturing engineering to specify component manufacturing and procurement sources
Investigate potential component cost reductions, second sources, and substitute components
Update component databases
Create and maintain component specifications and data sheets
Manage the components library
Estimate time required for activities related to component engineering activities
Electronics Sustaining Engineering:

Evaluate design change requests on electronic subsystems
Propose solutions to production and product performance problems
Redline and update documentation to effect changes
Discuss changes with the Cognizant Engineers
Assist in the preparation of EO release packages
Work with Nationally Recognized Testing Labs and other entities to compliance test products under CE, UL/CSA and CCC authority
Specify, conduct, and direct others to conduct and document tests on electronic items ranging from individual components to moderately complex subsystems, given detailed performance criteria and general supervision from a Cognizant Engineer
Communicate well orally and in writing with others with whom he/she works with within the Engineering and Operations departments
QUALIFICATIONS:
Must have a 2 or 4 year technical degree, preferably BSEE or BSET. A candidate with four or more years of experience in this industry is a plus.

RESPONSIBILITIES:

Specify and select electronic and electro-mechanical components based on requirements submitted by Cognizant Engineers
Work with purchasing and manufacturing engineering to specify component manufacturing and procurement sources
Investigate potential component cost reductions, second sources, and substitute components
Update component databases
Create and maintain component specifications and data sheets
Manage the components library
Estimate time required for activities related to component engineering activities
Electronics Sustaining Engineering:

Evaluate design change requests on electronic subsystems
Propose solutions to production and product performance problems
Redline and update documentation to effect changes
Discuss changes with the Cognizant Engineers
Assist in the preparation of EO release packages
Work with Nationally Recognized Testing Labs and other entities to compliance test products under CE, UL/CSA and CCC authority
Specify, conduct, and direct others to conduct and document tests on electronic items ranging from individual components to moderately complex subsystems, given detailed performance criteria and general supervision from a Cognizant Engineer
Communicate well orally and in writing with others with whom he/she works with within the Engineering and Operations departments
QUALIFICATIONS:
Must have a 2 or 4 year technical degree, preferably BSEE or BSET. A candidate with four or more years of experience in this industry is a plus.
 
Job Location: LOS ANGELES, CA
Per Diem: If Qualified
Overtime: Possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Intrusion Analyst

Description:
Our client is looking for a Cyber Intrusion Analyst in Savannah, Georgia! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Perform monitoring and analysis of security systems data from multiple security components including firewalls, IPS, VPN, web filtering, SIEM systems, host based intrusion detection, email filtering etc.
* Monitor Intrusion Detection systems (IDS) Analyze security data to effectively detect intrusions & attempted intrusions and to initiate and engage the proper resources to mitigate the risk and validating (IDS) alerts.
* Collecting and analyzing investigative information and data (e.g. internet history information, system logs, network traffic activity, encrypted or erased data) to identify signs or sources of compromise, poor security practices and unauthorized activities.
* Enforcing procedures for preventing web abuse; guiding the administration of security tools that monitor web security.
* Conducting preliminary security investigations related to employee abuse of security policies.
* Examining and analyzing network traffic, related applications and operating systems to identify potential threats, anomalous or malicious activities to network resources
* Conducts preliminary forensic collections of electronic evidence including information system and network devices for legal, human resources, ethics, and information security.
* Support of customers with security and general technology needs.

Mandatory Qualifications and Experience:
* Bachelor's Degree or equivalent combination of education and experience to successfully perform the essential functions of the job.
* Able to be on call for incidents and problems; also able to work different shifts.
* Able to travel as needed.
* Proficient in the use of incident response and forensics tools such as FTK, Encase, and Cellebrite.
* Must have an understanding of cyber forensics, networking, and information security technologies and be able to demonstrate outside-the-box thinking and continuous learning.
* Experience with the following operating systems: Windows, OSX, IOS, Linux or UNIX.
* Security Certification such as CISSP, CEH, ACE, EnCE, CCE, Security+ etc. is a plus.
* A credit history check from a national credit bureau will be conducted for all candidates for this position including new hires and current employees seeking promotion or transfer.

Desired Qualifications and Experience:
* Degree in information security, Computer Sciences or Technology related field preferred.
* Experience with threat hunting or working in a SOC is desired.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129609
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications. The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.



Additional Job Details:
* Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change
* Hardware Verification experience including, test procedure development, robustness testing and debug
* Experience developing hardware/software integration plans
* Experience creating LRU level (black box) requirements based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change
* Systems Verification experience including, test procedure development, robustness testing and debug
* Experience with configuration management and problem reporting tools Preferred Qualifications
* Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Experience using Mentor Graphics DxDesigner and Expedition
* Masters degree in Electrical Engineering.
* Experience with high reliability controller electronics and power switching circuitry.
* Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 47270
Job Location: Phoenix, Az
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 216
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3214
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Duration: 1 year contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Duties:
Job Responsibilities include but not limited to develop space craft electrical power system, support integration activities of multiple PPUs, perform analysis support of system stability, and provide worst case circuit analysis support

Our client is looking for a senior electrical engineer to work in our team to develop state of the art power electronics for spacecraft electric propulsion and high power systems. Contribute to the ongoing innovation to modernize, commercialize, modularize, and reduce mass, cost, and complexity. Great communication skills, technical innovation, depth, breadth, and passion will enable you to work effectively with cross functional (electrical, mechanical, software, system, test) product development teams. You will work on all phases of product development from proposal/concept/simulation/feasibility to design, test, production, and follow on support. You will work with major space contractors participating in space exploration and in commercial space activities.

Work within a multidisciplinary team of mechanical, software, system, project, test, and other engineers to perform the following:
10% Lead and perform proposals, feasibility studies, trade studies, and proof of concept work on complex electronics. These tasks may have immediate as well and future project and program impact.
40% Perform detailed circuit analysis, simulation, component stress analysis, and worst case analysis on complex circuits and systems.
10% Create schematics and oversee circuit board layout.
20% Bring up, verify, and debug circuits.
10% Develop and execute test plans.
10% Develop process improvements to improve effectiveness of the discipline and provide training/mentoring/guidance to other engineers to raise the level of competency of the organization.

Skills:
- BSEE with 10+ years of experience
- Must be self-starter with proven record of performance doing design work.
- Prior experience as a technical lead is desired.
- Previous avionics design hands on experience and knowledge specifically of power supply topologies and magnetic design is strongly preferred.
- Previous experience in a high reliability or highly regulated industry such as medical or nuclear industries is preferred.
- A demonstrated understanding of DoD/NASA engineering processes, materials, analysis and manufacturing is preferred.
- Must possess strong technical writing and effective presentation skills.
- Experience with Rocket Engines and Space Rated Avionics components and systems are a plus.
- Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).
- Prior experience driving innovation solutions to technical problems is desired.

Education:
- BSEE or MSEE
- Requires a Bachelor of Science degree in electrical engineering or computer engineering and minimum 10 years of hands on power electronics experience, or Master of Science degree in electrical engineering or computer engineering and minimum 7 years of hands on power electronics experience.
- Specific experience in advanced, high power, electronic power conversion and related designs is must.
 
Job Number: 10282
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Manager

Description:
Electrical Engineering Manager

Houston, TX
$41.50/hr
1 year contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO PER DIEM SPLIT / NO RELOCATION COMPENSATION*

Description:
Manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
Candidate will perform typical design engineering tasks, including modeling, and layout generation with drafting interface but must be able to effectively communicate and work cross-functionally as a team member.

This position will provide product support for a variety of space hardware electronic components and electrical systems. Additionally will include the development of new components and features. The position will play a crucial role in new product development, maintaining product integrity, evaluating change opportunities, and integrating new component designs into existing systems. Working to meet agreed upon cost and schedule commitments. The candidate should be able to read and understand schematics and wiring diagrams, analyze complex problems to identify root cause and develop innovative solutions. Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required. Occasional shift work required to support EVA Mission Operations.

Education/Certifications:
• Bachelor's degree with 2 to 5+ years’ experience required
• Master's degree with 0 to 2+ years’ experience
• The preferred candidate will have 2 – 5 years of experience in the integration and test of space flight qualified hardware.

Experience/Qualifications
• Sound electrical engineering background (wiring diagrams, systems analysis, motor and control applications, and control logic)
• Experience working with suppliers/3rd parties
• Experience in video and display technologies a plus
• Experience with test and measurement equipment
• Understanding of mechanical and software functions
• Strong communications and leadership ability
• MS Office applications
• Understanding of PCB assembly and other manufacturing processes Must be a U.S. Citizen, must either hold a current US DoD clearance or must be able to obtain and maintain a clearance if required, and successfully complete a U.S. government background investigation.
 
Job Number: 10323
Job Location: Houston, TX
Rate: 41.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Our client is looking for an Electrical Technician to work in Oldsmar, Florida for second shift! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Lay out, build, test, troubleshoot, repair, and modify developmental and production electronic components, parts, equipment, and systems, such as computer equipment, missile control instrumentation, electron tubes, test equipment, and machine tool numerical controls, applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing, and physics.
* Usually work under direction of engineering staff.

Mandatory Qualifications and Experience:
* Two year technical degree, Vocational Certificate in any field of electronics or 5 years of demonstrated experience
* Electronic troubleshooting experience to component level
* Experience with automatic and manual test equipment including O'scopes, Network Analyzers, Spectrum Analyzers, Digital Multimeters, and TDR checkers.
* Able to read blueprints / drawings / schematics.
* Good computer skills with ability to work from electronic work instructions
* Experienced with working in an Electro Static Discharge (ESD) environment
* Must be willing to work 2nd shift

Desired Qualifications and Experience:
* Flying Probe, Tyradyne, and ICT (HP 3070) experience, RF Troubleshooting a plus.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129697
Job Location: Oldsmar, FL
Duration: 1 year
Start Date: 02/11/2019
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
Electrical wiring and Harness Design
Wiring standards and best practice design
Aircraft zonal requirements and coordination
Power, ground, signals, and databuses
Wire gauge and type consideration
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector compatibility, pin selection, ect.)
Misc. electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, ect.)
Development of configuration managed, electrical harness design packages
Parts list, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and Harness Drawing Generation
Interpretation of system interface control data to conceptual schematics for point-to-point wiring connections between units
Evolution of conceptual schematics into aircraft wiring information
Coordination of 3D data for implementation into harness drawing packages
Creation and knowledge of drawing part number changes vs. drawing revisions
Use of wiring design tool to generate wire diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic system
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Databus and digital equipment interface considerations


Qualifications

BSEE or equivalent technical training, and a minimum of 5 years applicable industry related work experience in wire design
Experience with IGE-XAO SEE Electrical Expert is preferred; Mentor Graphics, Autocad, Zuken, or similar smart wiring design tool is required
Good working knowledge with Microsoft Office suite (Word, Excel, and PowerPoint) is required
Good working knowledge with Teamcenter for releasing wire diagrams and harness drawings, or familiarity with other PLM systems (such as SmartTeam, etc.) is desired
Good working knowledge with Electrical Wiring Interconnect System (EWIS) is desired



The Structures Company is an AA/EOE.
 
Job Number: 229
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Component Engineer (177)

Description:
*This is a full time, 9 month, contract position located in Grand Prairie, TX*



We are seeking an electronics component engineer who will be working on DoD/military component analysis, selection, screening, parts qualification and de-rating of electronic components. Duties will include component material selection, new component release/qualification, handle component related failures, handle component noncompliance issues, able to identify pure-tin and counterfeit part detection.



Required:
*2 years’ experience working as an engineer within the electronics components field.
*Electrical component manufacturing process and physical property analysis experience
*Able to get a security clearance after starting, which requires applicants be US Citizens.
*Engineering degree in material science or equivalent



Pluses:
*Experience in the disposition of Q-Notes.
*Familiar with parts release processes, and formal configuration boards.
 
Job Number: 177
Job Location: Grand Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Circuit Design 4 / FPGA / digital test equipment / developing digital electronics / no clearance CA

Description:
Engineer Circuit Design 4 (Job Number: 19001559, 19001702, 19001715, 19001722)

Number of Openings: 4

Location(s): United States-California-Manhattan Beach


Shift: 1st Shift

Target Start Date: Apr 29, 2019

Target End Date: Apr 24, 2020

Pay Rate: $68-$72/hr.
Location: Manhattan Beach, CA
Work Schedule: 9/80
Duration: 1 Year

Security Clearance: N/A

Job Description:

The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work with without appreciable direction.


Basic Qualifications:

- 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.

- Demonstrated proficiency using digital test equipment

- Demonstrated proficiency developing digital electronics


Preferred Qualifications:

- Experience designing high speed FPGAs
- Experience developing digital test systems
- Experience testing and validation of digital space electronics
 
Job Number: MB-1720
Job Location: Manhattan Beach, CA
Rate: 68-72/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical – 3 CREO CA

Description:
163976
Engineer Electromechanical – 3 (Job Number: 18012130)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Apr 1, 2019

Target End Date: Mar 27, 2020

Pay Rate: $50 to $52/hr

Work Schedule: 9/80

Duration of Assignment: Up to year



Job Description:

Product Engineering has an immediate need for a Mechanical Design Automation Library (MDAL) Designer to support the creation and verification of standard CAD parts and sub-assemblies utilizing our solid modeling tool (PTC Creo). Candidate must be detail-oriented with effective communication skills, at an expert level in the use of Creo, and competent in interpreting part specifications and Geometric Dimensioning & Tolerancing (GD&T) design principles.


Basic Qualifications:

•Bachelor of Science Degree plus 5 years of experience or Associates Degrees plus 9 years of experience in Information Technology, Engineering, or a related technical discipline.


•6,000+ hours in the use of PTC Creo version 2 (or higher) and Intralink version 10 (or higher)


•Experience in change control procedures and processes


•Experience with Microsoft Office software


•Solid interpersonal and communication skills


•Good organizational and problem solving skills with an ability to adapt quickly to changing requirements



Preferred Qualifications:

•Knowledge and some design experience of electronic parts and assemblies


•Knowledge of government project and business rhythms
 
Job Number: MB-1716
Job Location: Redondo Beach, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Structural Analysis 4 / 2nd shift / Fighter Aircraft experience preferred / No Clearance Required CA

Description:
164135
1715 Engineer Structural 4 (Job Number: 19000785)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Feb 11, 2019

Target End Date: Feb 7, 2020

Pay Rate: $70 to $73/hr

Work Schedule: 2nd shift - 4/10

Duration of Assignment: Up to 1 year



General:

Analyzes, researches and develops structural engineering specifications involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Analyzes damage tolerance, durability, design allowables and structural modeling. Specific structural engineering specialties may include dynamics and loads, stability and stress fatigue and thermal analysis. Tools utilized may include CATIA, IDEAS, ProEngineer and a variety of software applications.



Specific:

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Palmdale Aircraft Integration Center. Candidate should be experienced in structural analysis methods, including large scale NASTRAN modelling and analysis of metallic and advanced composite structures. Desired skills include familiarity with detailed structural analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies utilizing metallic/composite material (launch vehicle experience considered)


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.


Preferred Qualifications:

Composites, DaDT(Metallics), and MRB support.

Fighter Aircraft experience preferred.
 
Job Number: MB-1715
Job Location: Palmdale, CA
Rate: 73/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / DSP Design Engineer w/ ASIC (584)

Description:
*These are full time, 1 year contract positions, located in Orlando*


We seek a hands-on ASIC FPGA/DSP Design Engineer to design electronic circuits. Will be responsible for component selection, evaluation, test box design, prototype creation and checkout along with digital and analog analysis. Engineer will design and develop evaluation boards and test methodologies/interface hardware required to evaluate the design through systems integration, test and final device design and customer approval.



Required:
*6+ years’ experience for level 3, conducting firmware digital design engineering using FPGA/DSP or 11 years experience for Level 4 job.
*Familiar with video system design, synchronization, image processing operations and display formats.
*Active Secret Clearance

*On site work only, no remote work possible for this position.
*BSEE



Pluses:
*Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets.
*Familiar with Xilinx, Altera Part family internal FPGA fabric and IP and model based compilers

*Aerospace design experience
 
Job Number: 584
Job Location: Orlando, FL
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design/Verification Engineer - Clearance TX

Description:
163983
1333-1 FPGA Design/Verification Engineer

Work Location: Fort Worth, TX
Status: Open

Qty: 2
Desired Start Date: 1/28/2019
End Date: 8/1/2019

Job Description:
Researches, designs, develops, and tests a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

This position is for an engineer working in the Fort Worth IFG Hardware Design Team. Job responsibilities will include supporting development of Hardware, Software & Firmware for aircraft.

Responsibilities include:
• Electronic circuit design including Digital and Analog
• Electronic circuit board design, lay out, and routing
• FPGA development, integration, and test
• Electronic hardware testing and troubleshooting
• Support Software Development efforts for target hardware
• Author and Review Hardware Specifications
• Development and review of detailed engineering documents for firmware and hardware release
• Lead and Develop early career team members

Work Location: Fort Worth, TX
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: JE-1333-1S
Job Location: Fort Worth, TX
Rate: open
Per Diem: no
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Factors Reliability Engineer (001)

Description:
*This is a full time, 10 month, contract position located, in Grande Prairie TX*



We are seeking a lead Reliability Engineer who will be working on our DoD/military Electronic Warfare systems. The candidate will be creating reliability predictions for mechanical and electrical design as well as Failure Mode and Effects, and Criticality Analysis (FMECA), working with reliability program growth plans, conducting reliability growth analysis, Corrective Action Boards (CAB) and Failure Review Boards (FRB).



Daily duties may include supporting design reviews and test activities, working with Corrective Action Boards (CAB) and Failure Review Boards (FRB), identify Failure Review and Corrective Action System (FRACAS) trends to identify and prioritize failure modes to investigate for corrective actions, review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB). There will be a good portion of the time spent on providing inputs to engineers, performing analyses, and writing reports



Required
*7 years’ in Reliability Engineering; particularly performing reliability predictions, root cause analysis, corrective action boards (CRBs) and Failure Review Boards (FRBs).
*Experience using FRACAS and FMECA analysis
*Experience in Human Factors, and/or Testability/Built-in Test (BIT).
*Experience with Windchill Quality Solutions Reliability software tool or equivalent.
*Ability to manage subcontractors in Logistics field of expertise.
*Able to give presentations in front of large groups.
*1 job can start without clearance and get after starting, other job needs Active Secret Clearance; must be noted on top of resume.



Pluses
*4 year ME or EE degree
*Electronic Warfare systems experience
*Experience with Reliability Centered Maintenance (RCM).
*Military /Subcontract experience.
*Experience in Human Factors, and/or safety engineering
 
Job Number: 001
Job Location: Grande Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INDUSTRIAL SYSTEMS PROJECT ENGINEERING MANAGER-MACHINE SYSTEMS

Description:
JSG is hiring a Industrial Systems Project Engineering Manager for our client in Los Angeles, CA!

This is not an IT position.
Local candidates only.

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Industrial Systems organization.
Work with his or her peer, the Industrial Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Industrial Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Industrial Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations.
Deliver quality products on time.
Manage development projects that provide new and innovative industrial systems features and capabilities
Oversee and support the quotation activities for systems
Proposal writing and cost estimating
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development,
reporting, and participation in company-wide management and process improvement initiatives
Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added industrial systems features and capabilities

Requirements

Eight years experience in a technical management capacity at an industrial firm.
BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation
Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish day-to-day tasks while continuing to make progress, and bring to completion,longer term projects.
Good verbal and written communication
US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
INSTRUMENT AND CONTROLS ENGINEER

Description:
INSTRUMENT AND CONTROLS ENGINEER



Ponca City Refinery:

The Ponca City Refinery in Oklahoma has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.



Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.


 

Description:

The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning. The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel. The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures. The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

 

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and ConocoPhillips standards and practices to perform the above functions..

 

Responsibilities may include:



  • Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.

  • Identifying areas where instrumentation/controls can improve plant operation and profitability

  • Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.

  • Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects

  • Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings

  • Supporting criticality assessments of the plant's instrumentation equipment

  • Designing Refinery Safety Instrumented Systems (SIS) design and maintenance

  • Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems

  • Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems

  • Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment

  • Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)

  • Performing audits of instrumentation installations and process control loops including failure analysis inspections

  • Interacting with engineering and construction contractors, both on- site and off- site

  • Review instrument changes for Management of Change approval.  Ensure that changes are properly designed and documented.

  • Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.

  • Support DCS operator interfaces with respect to information presentation and abnormal situation management.

  • Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant's instrumentation assets. Provide leadership for implementation of these reliability systems.


QUALIFICATIONS

 

Basic/Required:  



  • Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics or equivalent

  • 3+ years of experience in a refinery and/or chemical industry

  • 3+ years of direct experience in process instrumentation design and/or maintenance.


 

Preferred:  



  • Knowledge of the Ponca City Refinery instrumentation asset base.

  • Proficient in use of SAP - PM & PS Modules

  • Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).

  • Proficient in computer applications such as Word, Excel, Outlook, and MS Projects

  • Expert knowledge of field instrumentation and controls through design and field installation experience

  • Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Client TDC3000 / Experion and FSC Safety Managers.

  • Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.

  • Demonstrated knowledge and use of SPI (InTools) database and specifications

  • Strong analytical skills including statistical analysis

  • Strong interpersonal and written communication skills

  • Ability to lead execution of work and resolve issues in a team environment

  • Accepts ownership, is accountable, and delivers on commitments


Ability to work in cross-functional teams

 


 




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 18-50643
Job Location: Ponca City, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2018-12-04 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristy Thompson
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Security CPSO/FSO ( Dayton , Ohio ) S8947856

Description:
Industrial Security CPSO/FSO ( Dayton , Ohio ) S8947856
12 Month Contract

Pay rate: $40-50/hr , maybe more for the right candidate

• MUST HAVE Active DoD SECRET clearance with investigation current within 5 years

Currently looking for an Industrial Security CPSO/FSO to work in our Dayton, OH location.
• MUST HAVE Active DoD SECRET clearance with investigation current within 5 years
• 8+ years of security related experience • Adhering to policies, practices, and procedures of the National Industrial Security Program (NISP) and implementing the National Industrial Security Program (NISPOM) the company policies, practices, and procedures. • Familiar with the NISPOM and the DoD Manuals 5205.07, Vols 1-4
• Under moderate supervision, administers routine aspects of the DOD or other industrial security program to ensure compliance with government and company security policies and procedures • Shall conduct security briefings and support security education programs. Investigates security incidents and violations and may recommend corrective action.
• Knowledgeable in the use of JPAS, DIAS, COMSEC and Electronic Questionnaire for Investigations Processing (e-QIP).
• Requires the ability to make sound decisions, manage time, take independent action, and provide focused solutions.
• Demonstrated ability to effectively communicate information to various audiences at all levels of the organization both verbally and through written communications.
• Must be well organized, willing to work in a team environment, be able to prioritize tasking, and perform in a multi-tasked and dynamic environment • Must be dependable, responsive, customer focused and possess the qualities of diplomacy, tact, excellent judgment, discretion and initiative.
• Monitors security procedures; ensures compliance with all aspects of the program including personnel, physical and administrative security procedures.

Basic Qualifications: • FSO Certification – Preferred
 
Job Number: S8947856
Job Location: Dayton, OH
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integrated Diagnostics Tester ID&T (529)

Description:
*This is a full time 6 month contract position located in San Jose*



We are hiring for an Integrated Diagnostics and Tester (ID&T) who will be using fault analysis software to determine deficiencies, and possible resolution/corrective action.



Candidate daily duties may include developing test plans, troubleshooting electronics, integrates design elements in BIT, automatic and manual test programs, generates ID&T requirements, conduct design reviews, problem solving during fabrication, assembly and test.



Required:
* 2 years’ experience in ID&T and associated standard fault analysis SW tools
*Resume showing a pattern of continuing growth of responsibilities, at previous positions
*Understands the interface of hardware configuration items (HWCI) with computer software configuration items (CSCI)
*Able to read, create and interpret drawings, blue prints and work instructions
*4 year degree in a technical field



Pluses:
*Knowledge of eXpress Modelling
 
Job Number: 529
Job Location: San Jose, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Logistics Management Analyst

Fort Worth, TX
$33.60/hr
1 year contract
First Shift
*MUST BE A U.S. CITIZEN*

Description:
In General, controls the efficient flow of goods, services, and information between points of origin to final destination in order to meet internal/external customer requirements. Ensures that customer service and time objectives are achieved within existing constraints in order to meet program objectives. Ensures the execution and continuous improvement of standard logistics processes, electronic data systems utilization/data integrity, and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, operating entities, distribution, transportation, customer service, and training for continuous improvement.

Specifically, perform L&TS Hardware Labs team operational logistic activities and coordination of simulation/test equipment, computer systems, electronic parts, non-electronic parts, and Aircraft PME as required. Coordination with procurement team on Material requirements for lab parts receiving including update of labs parts status, and parts tracking, as well as coordination with transportation outlets to ensure parts reach their appropriate destinations. Also, RF ID tagging of equipment as required, perform Parts/Equipment Salvage efforts, and coordinate/support Lab Tools Calibration activity with Metrology. Tasks also include packing/unpacking, lifting, moving, staging, shipping, receiving, and database tracking of Lab Hardware parts deliveries and coordination with LM internal transportation and external shipping vendors as required. Position requires a demonstrated ability to perform operational logistics tasks and parts receiving analysis related tasks as well as experience with computer applications involving spreadsheets and/or databases.

-Bachelors required
 
Job Number: 10332
Job Location: Fort Worth, TX
Rate: 33.60
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst TX

Description:
163996
1332-1 Logistics Management Analyst

Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 1/30/2019
End Date: 1/31/2020

Job Description:
In General, controls the efficient flow of goods, services, and information between points of origin to final destination in order to meet internal/external customer requirements. Ensures that customer service and time objectives are achieved within existing constraints in order to meet program objectives. Ensures the execution and continuous improvement of standard logistics processes, electronic data systems utilization/data integrity, and related functions. Builds relationships with strategic customers through logistics initiatives. Integrates learning from customers, operating entities, distribution, transportation, customer service, and training for continuous improvement.

Specifically, perform L&TS Hardware Labs team operational logistic activities and coordination of simulation/test equipment, computer systems, electronic parts, non-electronic parts, and Aircraft PME as required. Coordination with procurement team on Material requirements for lab parts receiving including update of labs parts status, and parts tracking, as well as coordination with transportation outlets to ensure parts reach their appropriate destinations. Also, RF ID tagging of equipment as required, perform Parts/Equipment Salvage efforts, and coordinate/support Lab Tools Calibration activity with Metrology. Tasks also include packing/unpacking, lifting, moving, staging, shipping, receiving, and database tracking of Lab Hardware parts deliveries and coordination with LM internal transportation and external shipping vendors as required. Position requires a demonstrated ability to perform operational logistics tasks and parts receiving analysis related tasks as well as experience with computer applications involving spreadsheets and/or databases.

Region: Fort Worth, TX
Level: Level 1: BS+0-3 YRS
Pay Rate: $32.00 Hourly


Areas of Expertise Logistics Yes 1 1 - 2 Years
 
Job Number: JE-1332-1
Job Location: Fort Worth, TX
Rate: 32/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner 3-Electrical

Description:
Manufacturing Planner 3

Location: Everett, WA
Duration: 5 months

Description:
Client is seeking Electrical Manufacturing Planners to support the 777/777-9 programs in Everett, WA.

Responsibilities include the following:
- Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
- Leads investigation and resolution of complex or systemic manufacturing related issues.
- Develop work statements and sequencing of events to support delivery commitments.
- Leads development of complex work statements and sequencing of events to support delivery commitments.
- Develops and documents new job practices, techniques and standards
- Provide ship side support, research and shop assistance.

The successful candidate will have the following education, experience, skills and capabilities:

Required Qualifications:
- Minimum 6 years of experience working in a manufacturing engineering or a production environment
- 6 or more years’ experience using basic Microsoft Office and office computing systems

Preferred Qualifications:
- Experience using Common Manufacturing Execution Systems (CMES)
- WIRS - Wires Information Release System
- PMD/ CAPP II
- IVT - Integration Visibility Tool
- WQCS - Wires Query/Compare Systems

Understanding of wiring and wire routing
Experience with wire bundle fabrication concepts, wire installation, electrical equipment installation and installation of wiring provisions is desirable.
Understanding of the client Production System

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
67B-Electrical/Electronics
 
Job Number: 19-01364
Job Location: Everett, WA
Per Diem: split
Overtime: possible
Duration: 5 months
Start Date: 2/8/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner- Electrical

Description:
Manufacturing Planner 3

Location: Everett, WA
Duration: 6+ Months

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Develops manufacturing concepts and strategies to support business objectives. Develops and integrates suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Reviews and approves supplier data to ensure manufacturing related requirements are met. Develops tooling requirements based on manufacturing and engineering requirements. Manages tools from initial design to end of use disposition. Investigates and resolves manufacturing related issues. Performs producibility assessments for part or product designs. Provides producibility input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops integrated work statements and sequencing of events to support delivery commitments. Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements. Works under general direction.

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

Position Comments:
This position will support the Mesa Electrical Center of Excellence and will be responsible for providing electrical (wire harness and electrical panel fabrication) ME planning support for both military and commercial platforms. Previous wire harness and electrical panel fabrication is desired.

Skill Code: 67B-Electrical/Electronics
 
Job Location: Everett, WA
Rate: $50
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 05/01/2023
Last Updated: 08/10/2023
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Location: Phoenix, AZ
Rate: $39.00/HR
Duration: 6 month contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
**** Candidate must be experienced with Teamcenter and NX modeling software and have aerospace packaging experience****

Job Description:
- Mechanical Designer/MCAD Drafter with emphasis on aerospace electronics packaging.
- Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
- Will interface with other engineering groups to insure design requirements are fulfilled.
- The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints.
- The position will work with cross functional teams to resolve issues.

Responsibilities may include:
- Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
- May include utilization of computer aided design applications.
- New product development from concept through production.
- Generate detailed solid models and engineering drawings.
- Processing documents through document change system.

Qualifications
- Minimum 8 years mechanical design experience required.
- H.S. Diploma required.
- Related technical degree a plus.
- Minimum 8 years solid modeling experience.
- Siemens NX11 a plus.
- Experience with Siemens Teamcenter PLM Software.
- Strong knowledge of GD&T ASME Y14.5.
- A background working on avionics design related experience a plus.
- Strong knowledge of manufacturing processes.
- Familiarity with DO-160 and DO-254 development guidelines a plus.
- Applicant should be highly motivated, with demonstrated leadership and communication skills.
- Close attention to detail required.
- Must be a US citizen or permanent resident.
- Good organization and planning skills required.
- Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
 
Job Number: 10407
Job Location: Phoenix, AZ
Rate: $39.00/HR
Per Diem: No
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / MCAD Drafter

Description:
The ideal candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. This may include utilization of computer aided design applications.

The Mechanical Designer/MCAD Drafter will work with emphasis on Aerospace Electronics Packaging. Activities will include:
• mechanical conceptual layout,
• detailed design, and
• engineering documentation.

The Designer/Drafter will interface with other engineering groups to insure design requirements are fulfilled. The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints. The position will work with cross functional teams to resolve issues.

Responsibilities may include:
• New product development from concept through production.
• Generate detailed solid models and engineering drawings.
• Processing documents through document change system.

Requirements:
• Must be experienced with Teamcenter and NX modeling software and have Aerospace Packaging experience.
• Minimum 8 years Mechanical Design Experience
• Minimum 8 years Solid Modeling Experience.
• Experience with Siemens Teamcenter PLM Software.
• Strong knowledge of GD&T ASME Y14.5.
• Strong knowledge of Manufacturing Processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills.
• Close attention to detail
• Must be a US citizen or permanent resident.
• Good organization and planning skills

Preferences:
• Related technical degree
• Siemens NX11
• Background working on Avionics Design- related experience
• Familiarity with DO-160 and DO-254 development guidelines

Critical competencies:
• Customer Focus,
• Drive for results,
• Technical skills,
• Interpersonal savvy,
• Commitment to Continuous Improvement,
• Effective Teamwork.
 
Job Number: 1910097975
Job Location: Phoeniz, AZ
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARED CATIA V (089)

Description:
*This is a full time, 1 year contract, located in Palmdale, CA*

We are hiring for a long term contract, CATIA V design engineer who will be designing wire harnesses for military aircraft. Candidate will be designing installations, integrations, part modifications, and assemblies, to military specifications such as ANSI and/or ASME.



Required:
*12-15 years’ experience in electronics/wire harness design using CATIA V5.
*Experience with ANSI/ASME Y14.100 or similar design/drafting standards
*Per diem split is available for those travelling for this position

*Must have an Active Secret Clearance (reinvestigated in last 5 years)

*Engineering Degree
 
Job Number: 089
Job Location: Palmdale, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineer II

Description:
POSITION PURPOSE
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

UNIQUE SKILLS
• Must be proficient NC Programming in CATIA V5.
• Preferred skill with CATIA V5 Programming Automation using VB/VB.NET.
• Experience NC Programming composite material (honeycomb), hardwood, and Lexan.

PRINCIPAL DUTIES AND RESPONSIBILITIES
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.

ADDITIONAL FUNCTIONS
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.

EXPERIENCE/EDUCATION
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.
 
Job Number: 24-308
Job Location: Savannah, GA
Rate: $52.50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer III

Description:
Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
• Assist in training and guiding lower level engineers as needed.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.
• Perform other duties as assigned.

Other Requirements:
• Strong knowledge of various machining and drafting methods, technical writing, and computer use.
• Ability to read and interpret complex blueprints and engineering drawings.
• Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
• Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 24-316
Job Location: Tulsa, OK
Rate: $62.50
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer III

Description:
Position Purpose:
Under minimal supervision, perform activities related to complex numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years machining, planning, tool design, or related manufacturing experience to include 2 years of experience as numerical control engineer.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May act as Team Leader as required, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.
• Assist in training and guiding lower level engineers as needed.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.
• Perform other duties as assigned.

Other Requirements:
• Strong knowledge of various machining and drafting methods, technical writing, and computer use.
• Ability to read and interpret complex blueprints and engineering drawings.
• Must be highly proficient with Catia modeling, drafting, and Catia NC Mill function.
• Must have demonstrated expertise and a proven track record in support of company policies and rules, and consistently meeting objectives.
 
Job Number: 24-350
Job Location: Tulsa, OK
Rate: $62.50/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control (NC) Engineer II

Description:
Location: Savannah, GA
Rate: $52.50/HR
Duration: Long Term Contract

****MUST be a U.S. Citizen or Permanent Resident****

Required Skills:
- Must be proficient NC Programming in CATIA V5.
- Preferred skill with CATIA V5 Programming Automation using VB/VB.NET.
- Experience NC Programming composite material (honeycomb), hardwood, and Lexan.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.

Position Purpose:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required.

Additional Functions: 1. May represent department in contacts with other departments, and may be required. to coordinate efforts with vendors or customers. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 10195
Job Location: Savannah, GA
Rate: $52.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Engineer II

Description:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:
• Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size.
• Interact with planners, tool designers, engineering, and customers as required, to finalize plan.
• Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates.
• Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut.
• Develop operator set-up sheets for numerical control machines.
• Develop flat pattern mylars and templates as required.
• Produce 2-D Catia tool drawings as required.
• May represent department in contacts with other departments, and may be required to coordinate efforts with vendors or customers.
• Assist in formulating Numerical Control policies, procedures, and specifications as required.

Requirements:
• Good verbal and written communication skills required.
• Must be able to read and interpret blueprints.
• Familiarity with various machining methods, technical writing, and computer use.
• Must possess good drafting, math, and geometry skills.
• Must be proficient with Catia modeling, drafting, and Catia NC Mill function.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.
 
Job Number: 24-307
Job Location: Tulsa, OK
Rate: $52.50/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB (Printed Wiring Board) Design Engineer III

Description:
Location: Canoga Park, CA
Rate: $40.00 - $50.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role **

Duties:
- The primary duty is to generate PWB on AR-provided Altium PWB Design and/or Mentor Graphic Board Station Tools for applications on the RS-25, Next Step, AEPS programs.
- This assignment will require an experienced individual that can work closely with electrical/electronic circuit designers and electro-mechanical designers in a team environment.

Skills:
- Extensive (10+ years) experience in the design, development and generation of PWB drawings.
- Experience in the use of S/W tools associated with PWB design is required and the ability to operate the Altium PWB is mandatory.
- Experience in MENTOR Board Station Design tool is also desirable.

Education:
- BSEE with 5 years of experience or 10+ years of direct industry experience in design and development of Printed Wiring Boards and Circuit Card Assemblies.
 
Job Number: 10281
Job Location: Canoga Park, CA
Rate: $40.00 - $50.00/HR
Per Diem: Split Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Control Associate

Description:
Location: Troy, OH
Rate: $39.88/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Associate's Degree****

Job Description
- The Production Control support function is primarily responsible for providing administrative support to the Production Control team by assisting with electronic work order release, document retrieval, and shop floor work order packet consolidation and delivery.
- Additional support duties may include material shortage review, work order component issue review, error trouble shooting, and coordination of material movements.
- This role will provide additional support to the Production Control group through the implementation of Solumina software in February of 2019.

Responsibilities:
- Receive daily signals from Value Stream Production Control outlining work orders to be released
- Execute material availability check, serial number review, and work order release in SAP
- Execute serial number review and work order release in Visiprise
- Reference and obtain required work instructions, drawings, and routers from Team Center
- Consolidate and distribute completed shop floor work order packets
- Assist with addressing work order material variance as they arise
- Assist with the coordination of material movement between OE/AMS plants
- Assist with troubleshooting work order errors at goods receipt
- Assist with the reconciliation of completed work orders
- Other related duties as required

Education:
- Associate's Degree required.
- SAP and Visiprise experience required.
- MS Office software experience required.
 
Job Number: 10174
Job Location: Troy, OH
Rate: $39.88/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Publications Illustrator US Persons Only (297)

Description:
*This is a full time, 6-12 month position located in either York PA or Sterling Heights MI*



We are hiring for a Publications illustrator who will support, design graphs, charts, schematics, dimensional drawings for use in technical reports/publications based on engineering drawings.



Daily work may consist of illustrating electronic assemblies, from various sources such as engineering, line art from photographs, hand art, blank pages etc.



Required:
*5+ years’ experience creating illustrations using Adobe Acrobat and Creo (or similar 3D software).
*Skilled in working with the following file types: DXF, PRT, JPG, TIFF, DWG, PDF, GIF
*Experience modelling and visualizing from 2D drawings with 3D CAD software.
*Must reside in US and be able to move to work sites in PA or MI for duration of assignment.
*No candidates on work Visas please; must be a US Person.
*HS Diploma, AS degree is a plus



Pluses:
*Able to create schematics and validate illustrations
*Experience reprograming & revolutionizing/automating processes
*Experience with Creo Illustrate
*Familiar with Visual Basic Macro, AutoLISP, or PhotoShop
 
Job Number: 297
Job Location: Sterling Heights, MI
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Manufacturing Engineer AS9100 (62)

Description:
*This is full time, 3-6 month contract to HIRE position located in Peoria, IL*



We are seeking a quality engineer /auditor who will be in charge of the company quality program and ensure the plant is in compliance with AS9100 standards.



Daily work will consist of monitoring production processes for compliance with quality standards, conducting internal audits (GLP, GMP, ISO, and Six Sigma), creating an audit plans/schedules, identify opportunities for improvement, creating audit reports, develop formal written reports for management and regulatory compliance agencies.



On occasion, candidate may develop internal auditing/testing parameters, conduct investigation of stored data in electronic systems (Oracle, TipQA, PLM, etc.)



Required:
*5-7 years’ experience in a manufacturing quality role that includes conducting quality audits, trend analysis and reporting results for ISO or AS9100 audits.
*Experience creating, documenting and improving new and or existing quality, reliability and safety standards/procedures.
*Background in implementing and maintaining a quality system.
*Familiar with auditing tools and systems (Control charts, Ishikawa diagrams)
*2 or 4 year degree, preferably in an engineering discipline



Plus:
*Quality auditing certification (ASQ CQA) for AS9100 or ISO 9001.
*Experience building Quality Management Systems (QMS)
*7-10 years’ experience
 
Job Number: 062
Job Location: Peoria, IL
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineer

Description:
RF Engineer
Project Overview:
• Work with the RF hardware designers to design, test and debug complex cellular capable products.
Overall Responsibilities:
• Design, debug and test cellular radios. This can include line up calculations, simulations with ADS, SCH capture, layout support, device bring up, test and troubleshooting and PTCRB/GCF certification support.
Top 3 Daily Responsibilities:
• Product design support
• Physical path design ownership (matching, simulation, debug, testing to 3GPP standard.
• Production support (review yields, BOM, open cases with vendors to resolve performance issues)
• Test automation
Required Skills:
• BSEE Degree or equivalent field.
• 5+ years of relevant industry experience
• Proficiency with LTE, GPS and legacy radio access technologies desired.
• Solid RF systems design background and experience building and shipping consumer electronics products.
• Knowledge of system architecture and wireless communication standards.
• Candidate will be directly involved in cross-functional team (EE/Software/PD/Antenna/Manufacturing/PCB Layout) engagement defining overall product architecture to achieve best RF performance.
• Excellent communication and documentation skills. Able to read and understand electronic schematics.
Nice to have Skills (not required):
• Cellular experience from Apple, Samsung, Qualcomm, Nokia, Ericson, etc.
• Experience with Qualcomm Chipset
 
Job Number: 396056
Job Location: Mountain View, CA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Michael Mower
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
STRAIN GAGE APPLICATION TECHNICIAN

Description:
JSG is seeking an Instrumentation Specialist Lead for a 15+ months contract opportunity in West Palm Beach, FL!

Description: Strain Gage application Technician:

The successful candidate shall meet the following requirements:- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 15 Years or more of experience.- Minimum of 10 years’ experience in the field of strain gage application to support test instrumentation -Experience and ability to accomplish required surface preparation, strain gage measurement, layout, alignment and bonding. Experience with measurement systems, instrumentation wiring, documentation, and Wheatstone Bridge wiring of strain gages to measure Torque, Axial Load, Bending and Shear strain.
Experience troubleshooting and repairing strain gage measurements. - Familiarity with electronic tools such as multi-meters, oscilloscopes, logic analyzers, etc.- Solder/de-solder experience required.
Experience reading wiring diagrams and interpreting schematics and engineering drawing.
Manages building and maintenance of instrumentation systems for Flight Test programs to provide measurement data required by the Engineering Department. Apply instructions prepared by aircraft technicians in the form of travelers, Assist in the preparation, installation, check-out and operation of instrumentation systems, follow planned maintenance / calibration, and standard operating procedures for all instrumentation and control equipment in order to maintain accuracy of data and ensure its validity, and operate DAS (data acquisition system) and other recording equipment.
 
Job Number: 367131
Job Location: WEST PALM BEACH, FL
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Design Engineer / Power supply design / FPGA NY

Description:
5828 Sr. Design Engineer
Number of openings: 4
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 70
Start Date: 02/04/2019
Tentative End Date: 02/03/2020

Job Description
This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneurnatic components and systems that will become the new products. The incumbent plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard and nonstandard engineering techniques, procedures, and criteria. The Senior Design Engineer independently devises new approaches for the problems encountered and plans and coordinates the work of others.


A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the Division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Senior Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department or he/she might report directly to the Chief Engineer. The incumbent requires guidance on general assignment objectives and critical issues, but he/she is expected to make independent and unreviewed decisions on most technical matters. His/Her work is periodically reviewed for application of sound professional judgment as it applies to meeting overall program and company objectives.

The Senior Design Engineer is a primary motivator and contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The incumbent's operating as a part of a design team will be responsible for the physical hardware design. He/She must oversee the efforts of drafting personnel and Assembly & Test Technicians. In this role he/she must be an inspirational leader, a creative problem solver, and must be sensitive to feedback from team members to identify and resolve problems before the design is released to production.

In the early stages of a new program, the Senior Design Engineer will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations.

During the design and development phase the Senior Design Engineer will initiate and carry out any analyses necessary to ensure the integrity and conformance of the design. These will include stress analysis, fracture mechanics, thermal analysis, and producibility analyses. The incumbent is responsible for selecting the materials, fits, heat treatment and finishes used in the design. He/She must be familiar with the properties and characteristics of materials and processes used hardware, and with all standards and requirements pertinent to the Division's industry, such as Military, FAA, and NASA specifications.

The Senior Design Engineer is responsible for actively communicating with the involved Division personnel who will be manufacturing hardware. He/She must frequently communicate with Reliability, Environmental Test, and Test Equipment Designers to keep them current on design status and ensure compatibility with their activities. Frequent consultation during both the proposal and design phases with the Manufacturing and Product Engineering personnel is crucial. Often these groups must be motivated and persuaded to consider novel or unorthodox methods of manufacture and test in order to preserve the simplicity or integrity of the design. The incumbent also must be sensitive to the expertise of manufacturing personnel, responding to their suggestions when appropriate. A delicate balance must be struck to achieve high producibility and cost effective parts and assemblies that satisfy quality and performance goals. The Senior Design Engineer is expected to provide the leadership and cooperation to ensure this happens.

The incumbent's responsibilities may include the direct supervision of up to four subordinate engineers and/or project or product engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

This individual will represent a high level of design problem solving in the Company. He/She must often act as a technical consultant for other programs both in development and in production. The incumbent must be able to communicate fluently to audiences representing a wide variety of skills, background, and disciplines. Travel, sometimes frequent, will be required to communicate with customer engineering groups. The Senior Mechanical Design Engineer's primary responsibility is the mechanical design of often complex servornechanisms, while that of the Senior Electrical Design Engineer is the design of complex electronic control hardware. In both cases this includes working with the customer to understand and define the design constraints, helping to write a winning proposal, conceiving novel mechanical or electrical solutions, performing design analysis, developing hardware, providing accurate and proper documentation of the design, and designing for producibility. He/She must be prepared to sell the features of the design and its implementations to both the customer and the division personnel who will be manufacturing and supporting the design.

To achieve the position of Senior Design Engineer, an individual will have at least a BS degree in engineering with extensive experience in creating successful designs of electrohydraulic, electromechanical, mechanical and/or electropneurnatic servornechanisms and their control electronics. For a Senior Mechanical Design Engineer broad background in design analysis, including stress analysis, kinematics, strength of materials, fluid mechanics, and vibration is essential. Experience with closed loop systems, fluid power control, servornechanisms, fracture mechanics and Computer Aided Design is desirable. A Senior Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components. Most important is a proven record of accomplishments including successfully developed and produced designs and a demonstrated ability to participate in a product design team.

ACCOUNTABILITIES:

1. Develop new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to a design proposal team in preparing a design, estimating costs, and assisting in writing the technical volume.

4. Operate effectively as a key element in a team of creative, independent individuals, soliciting and being sensitive to design feedback.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.

8. Consult on new product and market development efforts.

9. Maintain currency with materials technology, industry design requirements (Military, FAA, NASA, etc.), and modern design analysis tools.

10. When applicable supervise subordinate engineers and project/product engineering technicians.

Needs:
Space firmware experience
Power and mixed signal electrical design
Experience in high liability space – familiar with designing Rathard Application
Radiation hardware design
Experience with FPGA design hardware, Motor drives, signal conversion, lbdt rbdt
Understand 1553 RS-422
461 Mil standard understanding
BSEE with 10 years exp-
Cadence Allegro for design work
PC Board layout testing
Will need to test work, risk reduction
Familiar working with NASA / Commercial launch vehicle programs
Thrust vector control, election, launch and space vehicles
*astronauts program, satellite

Team player-will be on a large team
Power supply design DCD converters
 
Job Number: MB-5828
Job Location: East Aurora, NY
Rate: 70/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Manages high complexity projects in multidisciplinary research and collaboration with equipment designers and/or hardware engineers in the design, development, and utilization of electronic data processing systems software, and performs software modeling and verification.
 
Job Number: 160
Job Location: Windsor, CT
Duration: 12-18 months
Input Date: 11/14/2020
Firm Name: RCM TECHNOLOGIES INC
Attention: Kelly Krupa
Address: 3 ENTERPRISE DR STE 110
City, State: SHELTON, CT 06484
Phone: 203/225-5700
Fax Phone: 203/377-6298
Website: www.rcmt.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
PRIMARY RESPONSIBILITIES INCLUDE:
o Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions
o Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software
o Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems
o Ensures software standards are met
o Elicit, derive, and document software and/or system requirements to meet internal or external customer specifications
o Define software/and or system architecture, design software modules, and produce associated documentation per corporate or customer standards
o Write and test software modules and integrate with other software and/or hardware components
o Object Oriented development in C++ and/or C#.
o Testing, design, and integration of software systems.
 
Job Location: CO
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Windsor Locks, CT
Rate: $68.00/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages high complexity projects in multidisciplinary research and collaboration with equipment designers and/or hardware engineers in the design, development, and utilization of electronic data processing systems software, and performs software modeling and verification.


Education:
- Bachelor's Degree required.
- 10+ years of software engineering experience required.
 
Job Number: 10348
Job Location: Windsor Locks, CT
Rate: $68.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Position Overview:

Designs, develops operates and maintains software components and computing systems software to be applied to and integrated with engineering, scientific and manufacturing requirements.



Applies the appropriate standards, processes, procedures and tools throughout the system development life cycle to support the generation of engineering applications and products.



Developments real time embedded systems involving SW for digital signal processing, electronic warfare, and control and display components. Interfaces with customers, suppliers, application users and other technical and support personnel.



A Bachelor’s degree in Computer Science, Electrical Engineering, or related engineering field.   (MUST BE ABLE TO OBTAIN A SECURITY CLEARANCE)


  • 9+ Years of Embedded Software Engineering experience.

  • Real Time Operating Systems Experience.

  • Must have experience with C++ programming languages:(Either applicable. No preference) :

  • C++

  • EW Background • Capable of working on both high and low level software • VxWorks or similar embedded OS experience • UML design experience




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 18-49460
Job Location: Clifton, NJ
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-06-21 00:00:00.0
Start Date: 2018-12-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Brian Carrillo
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr QA Engineer / local only / in person interview required CA

Description:
Job Title: Sr QA Engineer


Work Site Address: Chatsworth CA
Job Number: 5778
Max Pay Rate: 55.00
Start Date: ASAP
End Date: 6 Month
Position Type: Contract


Job Description:
1. Project Engineering:
Provides varied technical support including engineering concepts, statistical methods, and Quality Technology. Provides personal contact with internal and external personnel from technical disciplines.
2. Inspection Planning:
Provides inspection plans for receiving inspection, manufacturing operations, assembly & test processes, and final inspection.
3. Quality Planning: Provides planning, development, implementation, and administration of cost effective and complex Quality Programs.
4. Contract Compliance: Assures compliance with contractual issues for complex programs relative to quality, including coordination of customer, government, regulatory agency audits, and flow-down of contract requirements to suppliers and appropriate disciplines.
5. Program Support: Provides technical assistance to internal and external technical disciplines in the resolution of fabrication, and field related problems.
6. Failure Analysis & Corrective Action: Conducts complex Failure analysis by utilizing his organizational, technical knowledge, analytical and communication skills to find the root cause and implement closed loop corrective solving.

Job Duties:
Reports to the Supervisor of Quality Engineering and is self-motivated to follow through on assignments with limited supervision. Responsible for planning, implementation, and administration of complex Quality Programs to assure that a system is in place to meet or exceed contractual quality requirements.



Preferred:
GMIPs support;
Fluency with Tip Technologies’ TipQA application or equivalent;
Quality Audit;
Electronics and Electromechanical design for spaceflight;
GIDEP assessment and response;
Supplier Quality Management.


Education Requirements:
BSME and six years’ experience in Quality Engineering. Must have mastery of military specifications most frequently encountered in quality programs and should have a specialized technical knowledge of products as well as manufacturing, assembly, and functional test methods. The incumbent must be a proficient user of various statistical, spreadsheet, word processing, and database software packages.


**Please read**
**In-Person interviews will be required for this position. Preference will be local candidates**
 
Job Number: MB-5778
Job Location: Chatsworth, CA
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
Location: Phoenix, AZ
Rate: $58.00/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
****MUST have a Bachelors Degree****

Job Description:
- The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
- The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
- Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation.
- Also includes managing Problem reports for hardware that has already been delivered.
- The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment.
- As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities:
- Primary ownership of systems development processes.
- Support the development and review of systems/hardware requirements decomposed from customer specifications.
- Coordinate with systems and hardware teams to understand the cross functional requirements and constraints.
- Assess design maturity and reviewing technical risk.
- Participate in component design reviews.
- Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
- Support project planning efforts and ensure execution to schedule and budget.
- Design responsibilities include architecture, development and analysis of RF, wireless and high speed communication links.
- Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
- Evaluate and approve electronic components to meet requirements for availability, performance and cost.
- Support project planning efforts and ensure execution to schedule and budget.
- Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
- Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.

Qualifications:
- Bachelor's degree required.
- Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
- Good computer skills with ability to learn new programs/software
- Ability to work under pressure and within time constraints
- Excellent organizational skills with ability to multi-task amidst rapid change
- Hardware Verification experience including, test procedure development, robustness testing and debug
- Experience developing hardware/software integration plans
- Experience creating LRU level (black box) requirements based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
- Excellent written and verbal skills
- Good computer skills with ability to learn new programs/software
- Ability to work under pressure and within time constraints
- Excellent organizational skills with ability to multi-task amidst rapid change
- Systems Verification experience including, test procedure development, robustness testing and debug
- Experience with configuration management and problem reporting tools

Preferred Qualifications:
- Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
- Experience using Mentor Graphics DxDesigner and Expedition’
- Masters’ degree in Electrical Engineering.
- Experience with high reliability controller electronics and power switching circuitry.
- Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 10408
Job Location: Phoenix, AZ
Rate: $58.00/HR
Per Diem: No
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer (Aerospace Electronic Control Units)

Description:
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for Aerospace applications. The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.

The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Primary Responsibilities
• Primary ownership of Systems Development Processes.
• Support the development and review of Systems / Hardware requirements decomposed from customer specifications.
• Coordinate with Systems and Hardware teams to understand the cross functional requirements and constraints.
• Assess design maturity and review technical risk.
• Participate in Component Design reviews.
• Utilize appropriate Lean Product Development tools to support cost-effective technical solutions with heavy focus on platform design, reuse, and knowledge-management
• Support project planning efforts and ensure execution to schedule and budget.
• Design responsibilities include architecture, development and analysis of RF, wireless and high-speed communication links.
• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
• Evaluate and approve electronic components to meet requirements for availability, performance and cost.
• Support project planning efforts and ensure execution to schedule and budget.
• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
• Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
• Good computer skills with ability to learn new programs/software
• Ability to work under pressure and within time constraints
• Excellent organizational skills with ability to multi-task amidst rapid change
• Hardware Verification experience including, test procedure development, robustness testing and debug
• Systems Verification experience including, test procedure development, robustness testing and debug
• Experience with configuration management and problem reporting tools
• Experience developing hardware/software integration plans
• Experience creating LRU level (black box) requirements-based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
• Excellent written and verbal skills

Preferred Qualifications
• Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
• Experience using Mentor Graphics DxDesigner and Expedition
• Masters’ degree in Electrical Engineering
• Experience with high reliability controller electronics and power switching circuitry
• Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 1910097977
Job Location: Phoenix, AZ
Duration: 1 year
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technician Level - 1 MA

Description:
Requirement#
STTTM-REQ-0391
Work Location
Cambridge, MA (61 Moulton Street)
Work Week
9/80-A
Priority
High
Needed Date
02/01/2019
End Date
01/31/2020
Number of Resources
1
Security Clearance
No clearance

Title
Technician Level - 1

Description
Able to install, repair, & maintain various electronic and mechanical devices.

Mandatory
• An Associate degree in a scientific field with 3 yrs lab/industrial experience or High School diploma with minimum of 5 yrs lab/industrial experience.
• A basic understanding of chemistry and materials properties preferably in polymer membrane
• Hands-on in analytical techniques/instrumentation, and computer driven data collection and basic analysis.
• Experience in quantitative analytical chemistry techniques such as ICP, UV-VIS, conductivity, thermal and mechanical testing.
• The ability to use and handle gas cylinder and hand tools such as wrenches, voltmeter, pipettes, pumps, and other basic lab equipment.
• The ability to follow schematics, troubleshooting issues, and implement repair strategies.
• Solid communications skills (both verbal and in writing) are required.
Desired
• Experience (4+ years) in carrying out repetitive, high through put analytical testing to support the development and commercialization of the targeted product.


• Experience working in a materials testing lab following procedures, ability to write SOP’s and maintaining analytical instruments and equipment to quality standards.


• Experience in developing processes to validate analytical chemistry methods that support product specification.


• An interest in renewable energy technologies and a desire to learn more about the field.


Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
industrial experience 0-3 Years Yes

Min Pay Rate
25.00 USD
Max Pay Rate
35.00 USD
OT Allowed
Yes (OT Limitation: No)
Travel
No
Non-Exempt
Rate Type
Per Hour
 
Job Number: JE-0391
Job Location: Cambridge, MA
Rate: 25-35/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer CA

Description:
163973 Test Engineer

Work Site Address: Torrance, CA 90501
Job Number: 5833
Max Pay Rate: 45.00

Start Date: ASAP
End Date: 6 Months with possibility of CTH
Position Type: Contract

The Test Engineer/Conductor is responsible for performing the tests of assigned programs as well as engineering solutions to testing issues. As a Test Conductor, the incumbent will set up and perform tests, measure and record test data, and review, and analyze test results. As a Test Engineer, the incumbent will support the Senior Test Engineer in troubleshooting and resolving testing problems.

The Test Engineer/Conductor will be responsible for performing and overseeing electrical, mechanical, functional tests. This will involve manual set up of test, actual performance and monitoring of test, manual and automated measuring and recording of test data, and computer assisted analysis of the test results. Therefore the incumbent should be comfortable with hands-on type of work, have high attention to detail, and be proficient with the computer and MS Office tools. The incumbent will learn to operate motors and motor drivers, use various electronic measurement devices, and generate a variety of mechanical test setups from written procedures.

The Test Engineer/Conductor will also be responsible in supporting various engineering tasks. This will involve researching and defining test parameters and methods and preparing and utilizing various post processing scripts for data analysis. It will also involve reviewing and verifying test results, troubleshooting and fact-finding test discrepancies, updating or modifying work instructions, and maintaining test schedule. Therefore the incumbent should have excellent communication, organizational skills, and good analytical skills. The incumbent should also be a quick learner, self-motivated, work well in a team environment, multi-task, and take ownership of a task with minimal supervision.

Roles and Responsibilities
In all phases of the job, the Test Engineer/Conductor's tasks are governed by technical, cost, and schedule requirements and the incumbent must be able to work under pressure with minimum error and maximum efficiency. In rare cases, the incumbent must be flexible enough to perform some tasks out of the scope of this position in order to fulfill certain test requirements, under the direction of the Senior Test Engineer.

1. Setting up and performing tests; measuring, recording, and analyzing test data with minimum error and maximum efficiency.
2. Troubleshooting to resolve test discrepancies.

Qualifications and Education Requirements
1. B.S. in engineering or related field.
2. Knowledge of MS Office tools
3. Technical writing and communication skills.
4. Good interpersonal relationship skills (communication, attitude, teamwork, flexible) a must.
5. Knowledge and/or experience with strength testing and report writing.
 
Job Number: MB-5833
Job Location: Torrance, CA
Rate: 45/hr max
Per Diem: no
Duration: 6 months CTH possible
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Back to Advanced Job Search