Job Search Results

453 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 08:44AM Pacific Time by ContractJobHunter. )

Listings 1 - 453

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Aircraft Mechanic

Description:
The candidate will consistently and accurately disassemble, clean, evaluate, perform repairs and assemble and test Hydraulic landing gear components in accordance with approved data.

Assigned Duties
• Work independently with limited supervision.
• Use precision measuring instruments and gages such as feeler gauges, dial indicators, micrometers, calipers.
• Perform repair of detail components by filing, stoning, lapping and polishing.
• Using power and hand tools for drilling, sanding and riveting.
• Write in a clear and concise manner the results of evaluations and be able to communicate repair requirements for work performed within our facility or sent to outside sources.
• Adhere to all EH&S requirements, FAA & EASA regulations, company rules, policies, procedures and corporate initiatives.
• Follow procedures found in component maintenance manuals, service bulletins, ORI’s, OREI’s, drawings, check sheets, etc.
• Must be competent in the use of torque wrenches and have a complete understanding of SAC torque specification SS9300.
• Chemically treat repaired surfaces in accordance with approved data.
• Review and interpret related paperwork to ensure proper identification of parts, operational sequence and record information on appropriate documentation.
• Perform assembly operations such as: install bushings, bearings, liners by shrink fitting and use or arbor press.
• Use hydraulic test equipment.

Experience Required
• High School Diploma or Equivalent required
• Aerospace Powerplant and/or Airframe license.
• Min. 2 yrs. experience in Aerospace Maintenance.
 
Job Number: 1910106123
Job Location: Trumbull, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical support/direction.
2. Expected to support team’s performance on project related to the analysis, design, and testing of plasma physics experiments.
3. The position more generally requires working in a small, fast moving team on concept level analysis, study of plasma stability and behavior, as well as detailed design of experimental hardware and experiments.
4. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
5. Strong verbal and written communication skills are highly desirable.
6. Occasional overtime and odd hours required.
7. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
8. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
9. Must be able to obtain a Secret security clearance.
10. Selected applicant must also possess, or be able to obtain, special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. Must have experience in designing, developing, testing, analyzing, or modeling/simulating plasma physics experiments/phenomena.
3. Ph.D. in Physics, Aerospace Engineering, Mechanical Engineering, Nuclear Engineering, or Electrical Engineering with strong background in experimental plasma physics preferred.
4. Strong research background in plasma diagnostics.
5. Strong research background working with or developing neutral beams.
6. Experience working with high vacuum and ultra-high vacuum systems.
7. Proficient with analysis tools such as MATLAB and/or LabVIEW.
8. Good oral presentation and written skills.
9. Proficient with MS Office tools.
 
Job Number: 11678
Job Location: Palmdale, CA
Rate: $70.00 - $83.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Process Engineer

Description:
The Airframe Process Engineer is required for 2nd, or possible split shift (late 1st to 2nd, flexible hours) to complete tasks as related to AeroStructures in Support of Black Hawk Major Assembly build, tooling, liaison, and planning.

The candidate’s responsibilities will include supporting a Process Engineer Lead assigned to existing Black Hawk programs.

Primary responsibilities include Manufacturing Engineering support of Black Hawk build and designs by providing producibility review, work instruction planning, developing tooling and manufacturing plans, and manufacturing implementation and support of airframe installation and modifications.

Also, the candidate must review, sign off, create, and implement PCAS for EC changes, issue SAP notifications to create new tooling, and perform process validations.

The candidate must pro-actively coordinate with Design Engineering and other disciplines and actively engage in continuous quality improvement through the use of other ACE tools.

The candidate must be flexible and highly motivated with a proven technical ability and business judgment with the ability to work on multiple programs. There is a potential for overtime between 5 and 10 hours dependent upon Operations scheduling and applicants experience.

This position reports to Process Engineering Black Hawk Lead

This position is seeking a highly motivated, flexible individual with proven technical abilities and business judgment.

Requirements
• BS in Mechanical Engineering, Aerospace or Manufacturing Engineering
• Five (5+) years of Airframe Process Engineering
• Proficiency in all processes associated with Airframe Process Engineering.
• Proficiency in Solumina, Matrix, Microsoft Programs, CATIA, CADRA, and SAP is mandatory.
• Candidate must be flexible in regard to work schedule and willing to support weekends.
• Good communication skills
 
Job Number: 2010114361
Job Location: Bridgeport, CT
Per Diem: split
Overtime: possible
Duration: 1.5 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Designer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several CAD Designers to produce a 3-D model and 2-D layout drawings of the product to meet both engineering and customer requirements.



Responsibilities will include but not be limited to:

Create Proposal Outlines and Layouts for customers.

Create Proposal Envelope Solids in customer preferred formats.

Work with engineering for initial 2D concept of product.

Create solid model piece parts and housings in NX.

Perform tolerance stack-up analysis to ensure correct fit and alignment

Create assemblies in NX.

Create Layout and Balloon Sheets.

Create Layout Parts List.

Create dimensioned detail component drawings.

Investigate and improve, with engineering, current product design issues.

Support and participate in engineering design reviews

Required Software: Siemens NX, Drafting and PDM tools



Required Experience:

5-10 years experience in mechanical design with significant experience using NX
5-10 years experience in detailing design and related manufacturing methods are required
Some manufacturing experience is desirable especially related to machining, assembly and other traditional manufacturing processes
FEA knowledge with ANSYS is desirable
Required Education:

HS Diploma and/or technical certification required
Associates or Bachelor's degree preferred
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 245740
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CMM Inspector

Description:
Great opportunities in Tempe 2nd & 3rd shift for CMM Inspectors - no programming.  Semi-conductor or Aerospace experience is preferred.

Performs mechanical inspections of products to determine conformance to the customer's Engineering prints and specifications, utilizing standard mechanical instruments, CMM's, functional gauges, test fixtures, and electronic diagnostic instruments for variable data collection. Follows Manufacturing plans and inspection procedures to report product status accurately, record "turn backs” for resolution, and identify nonconforming material to be properly documented and segregated. Prepare and use standard documentation for reporting variable test data, SPC, and detailed inspection plans for the purpose of recording measurement results. Be able to exhibit an accuracy in judgment for ascertaining critical components and possess administrative qualities for document collection. Perform process/product audits, over-checks for product validation, and review product history for trends and analysis.



Knowledge and Abilities:



Skill-set required to conduct receiving inspections using standard mechanical, and electrical instruments, functional gauges, test fixtures and utilizing CMM's with existing Part Programs. Additionally have good basic math aptitude and organizational skills. Ability to read engineering drawings interpreting GDT per Ansi Y14.5, technical specifications, product certifications, manufacturing planning, and inspection procedures. Ability to interpret SPC plans and results, analyze SPC data for Manufacturing Improvements, understand and perform Gage R&R studies. Report product status accurately, record "turn-backs” for resolution, analyze product history for trends and identify nonconforming material to be properly documented and segregated using Computer software. Prepare and use standard documentation for reporting and detailed inspection plans for the purpose of recording measurement results on Computer software . Perform process / product audits, over-checks for product validation, and review product history for trends and analysis. Inspector is expected to have a comprehensive understanding of appropriate workmanship standards and be able to use sampling plans to establish product acceptance in line with the customer's specifications. Possess a fundamental knowledge of manufacturing processes, familiarity and knowledge of machining, and a basic understanding of special processes (i.e heat treatment, plating, welding, etc.).



Education and Experience:



High School Diploma or GED required. Must have a minimum of 3-5 years inspection experience in a manufacturing environment. Preference to have mechanical experience with semi-conductor products and/or aerospace products and assemblies.






Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-40318
Job Location: Phoenix, AZ
Rate: 25.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-09-27 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Camille Hannes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist - Mills/Lathes - 3rd Shift

Description:
JSG is looking for a CNC Machinist - Mills/Lathes to work at one of our premier Aerospace Clients in Simi Valley, CA.

3rd Shift
9:00pm - 5:00am

Position Summary:

The candidate will be required to set-up, operate, and adjust CNC machines, Lathes and/or Mills. Work from drawings and written instructions to create parts. May need to make offsets to programs on CNC Machines.

Job Responsibilities:

Responsible for all phases of part operations maintains part conformance per sketch and drawing requirements.
Perform and maintain accurate in-process quality inspection and records.
Identify and recommend process improvements that reduce part quality variation.
Input data into visual management forms and convey results to management.
Continuously improve processes, procedures, and eliminate waste.

Qualifications

3-5 years experience operating CNC Lathes and/or Mills
Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.
Ability to maintain close tolerances (within .0003”), hold .0003 profile, roundness.
The ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma
Per ITAR requirements, must be a US Citizen or Permanent Resident Card Holder)
 
Job Number: 375510
Job Location: Simi Valley, Ca.
Per Diem: No
Overtime: Possibly
Duration: Temp/Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist- Mills/Lathes, 2nd Shift

Description:
JSG is looking for a CNC Machinist - Mills/Lathes to work at one of our premier Aerospace Clients in Simi Valley, CA.

2nd Shift Hours: 3:30pm - 11pm

Position Summary:

The candidate will be required to set-up, operate, and adjust CNC machines, Lathes and/or Mills. Work from drawings and written instructions to create parts. May need to make offsets to programs on CNC Machines.

Job Responsibilities:

Responsible for all phases of part operations maintains part conformance per sketch and drawing requirements.
Perform and maintain accurate in-process quality inspection and records.
Identify and recommend process improvements that reduce part quality variation.
Input data into visual management forms and convey results to management.
Continuously improve processes, procedures, and eliminate waste.
Qualifications

3-5 years experience operating CNC Lathes and/or Mills
Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.
Ability to maintain close tolerances (within .0003”), hold .0003 profile, roundness.
The ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma
Per ITAR requirements, must be a US Citizen or Permanent Resident Card Holder)
 
Job Number: 373614
Job Location: Simi Valley, Ca.
Per Diem: No
Overtime: possibly
Duration: Temp/Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinists - 2nd and 3rd shift positions

Description:
Johnson Service Group (JSG) is teamed with a leader in the aerospace, defense, and commercial markets. Immediate fulltime/direct hire 2nd and 3rd shift position for experienced CNC Machinists.

Scope of Experience and Responsibilities:

2-5+ years of conventional and/or CNC mills, lathes and tree mills experience.
Experience with Mori Seiki Mills, Haas Lathes/Mills, Bridgeport Mills, CNC Lathes and/or similar systems.
MasterCAM experience is a plus.
Able to work from blueprints and similar documentation.
Experience with tooling and able to run small production work.
Monitor and maintain the condition of cutting tools.
Utilize computer programs to enter part data (i.e. serial number), log time, look up instructions and blueprints and download programs.
Work from instructions, set-up sheets, and method documents to correctly set up machines and inspect machined parts.
Prefer experience with precision/close tolerance parts.
Knowledge of basic inspection techniques.
Ability to use micrometers, functional and cylindrical gauges, comparators, indicator setups, calibration stickers, and scales is a plus.
Knowledge of Geometric Dimensioning and Tolerancing (GD&T) is a plus.
Education: High school diploma or equivalent required.
Shift: 2nd and 3rd Shift positions

Type of employment: Direct hire positions with excellent benefits
 
Job Number: 375840
Job Location: Santa Clarita, Ca.
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer

Description:
Citizenship Requirement: US Persons



Job Summary

The Components Engineer is responsible for robust manufacturing process selection, implementation and control of products, and reporting status of the assigned products to meet stakeholder requirements.



Job Responsibilities

• Responsible for the manufacturing process, procedures and production layouts, processing machining and material handling.
• Responsible for APQP (Advanced Product Quality Planning) implementation within product family
• Strong understanding of the following standards with ability to ensure compliance to customer requirements.
o AS9100 – Aviation, Space, and Defense Quality Management Systems Requirements
o AS9145 – Advanced Product Quality Planning (APQP) and Production Part Approval Process (PPAP)
o AS9102 – First Article Inspection (FAI)
o AS9103 – Variation Management of Key Characteristics
o AS13000 – Problem Solving (8D)
o AS13003 – Measurement Systems Analysis (MSA)
o AS13004 – Process Failure Modes & Effects Analysis (PFMEA) and Control Plans
o AS13006 – Process Control Methods (including Statistical Process Control (SPC))
• Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance to reach business case hours and cost.
• Responsible for building inspection and test requirements into the production plan.
• Selects tools to verify their efficiency and performs root cause investigations, initiates corrective action of problems and deficiencies to ensure product quality, and report non-conformances to customer.
• Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
• Ensures processes and procedures are in compliance with regulations.
• Acts as technical expert for the assigned product, both internally and externally to suppliers and customer.
• Provides engineering estimates for business cases for similar product / product families.
• Responsible for the in process modelling (using Siemens NX).
• Responsible for the operation sequence list and operation sheets for the assigned products.
• Performs other duties, tasks and responsibilities as assigned.

Required Qualifications:
• Bachelor’s Degree in Manufacturing/Mechanical Engineering / related field, or in lieu of a degree 6+ years of experience in Manufacturing and Engineering industry will be considered.
• 4+ years Knowledge of NC programming and machining methods.
• 4+ years of experience with CAD software, NX Unigraphics preferred.
• U.S. Person per ITAR regulations to comply with export compliance and site SSA requirements.

Preferred Qualifications:
• Six Sigma Black Belt or Lean Training Preferred.
• Aerospace environment preferred.
• Able to demonstrate the ability to work, and deliver, under own initiative.



Please send resumes to Becky Norman at bnorman@butler.com.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57877
Job Location: Manchester, CT
Rate: TBD
Per Diem: possible
Overtime: possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creative & Business Writer - Aerospace Experience

Description:
JSG is hiring a Creative & Business Writer for a 2-year contract in Huntsville, AL!

Description:

Writes, rewrites and edits technical documents such as Illustrated Parts Breakdown / RPSTL, technical publications to communicate clearly and effectively technical specifications.
Acquires subject knowledge by interviewing product developers, observing the performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals.
Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams, and charts. Conducts quality review of materials.
Required Experience/Knowledge:

Bachelors’ Degree from an accredited college in a related discipline w/ 6 years of professional experience, or Masters’ degree w/ 4 years of professional experience.
Equivalent experience/combined education will be considered
Candidate must be knowledgeable of US Army UH60 A/L/M. Knowledge of MIL-STDs 40051B, 40051C and 40051-1C.
Source matter expert on UH/HH-60 Blackhawk.
Working knowledge of editing XML.
Experience with MIL-STDs 40051B, 40051C and 40051-1C.
US Citizenship is a requirement
Ability to oversee multiple projects of varied size and scope.
Effective communications skills (both written and oral). Able to think and operate independently and possess strong organizational skills.
 
Job Number: 375756
Job Location: Huntsville, AL.
Per Diem: Possibly
Overtime: Possibly
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Sales Demand/Forecasting Manager - Aerospace Experience

Description:
Johnson Service Group (JSG) is teamed with a global leader in the aerospace, defense and commercial markets who is seeking a talented Customer Sales Demand/Forecasting Manager to determine future sales forecasts as well as resources and material.

Scope of Experience and Responsibilities:

2-3+ years of related sales, planning and/or manufacturing experience, preferably in the Aerospace/Defense industries.
Will monitor and analyze data to support forecasting, order entry, order delivery, etc.
Responsible for communicating forecasting requirements to supply chain/planning input in developing a Demand Forecast.
Provide reports Demand Review Meetings, including: Actual to Sales Plan; Profit Plan/Forecast; Bookings analysis and Forecast QDRC metrics.
Provide necessary data for reports for BTO, including: Analyze variances of forecast from prior month; Analyze major adjustments and Reconcile differences in forecast vs. actual orders.
Provides Supply Difference Report and reconcile differences in forecast vs. actual orders, per the planning department.
Daily/weekly actions to manage, develop and maintain forecast assumptions for Sales Operations Planning (S&OP) process.
Distribute weekly customer shipment report and bookings and month-end customer shipment/bookings reports.
Maintain forecasting for new products review and communicate details by item and product code to the Master Scheduler team.
Strong written and verbal communication skills.
Highly proficient with MS Office Suite, including Word, and Excel.
Experience with data mining tool such as Monarch, and a report writer (i.e. Business Objects).
SAP or similar ERP system experience is preferred.
Experience with ADAM forecasting tool (is a plus) for reports for demand data.
Education: Two year Associates Degree in Business or a similar discipline is a plus.

Duration: Direct Hire

Compensation: Highly competitive compensation with excellent benefits
 
Job Number: 374938
Job Location: Los Angeles, Ca.
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Location: San Clemente, CA

12+ months

Please contact Laura Leszek at 765-427-4721 if interested!

Job Description:

Seeking mid and senior level Design Engineers to perform mechanical design and drafting tasks including composite part designs.  Qualifications include:

•             Experience with surfacing, solid modeling, and drafting

•             CAD Software: Experience with 3D Experience/CATIA V6.  Strong CATIA V5 users considered.

•             Experience using Composites workbench (i.e. CPD for CATIA V5 or 3Dx equivalent)

•             Primary / Secondary Structural Design experience including sheet metal, machined and composite parts

•             Prior Lockheed or Sikorsky experience a preferred

•             Composite Tooling (molds, trim tools) design preferred

•             Experience with GD&T preferred

•             Aerospace experience preferred

•             Experience with additional CAD programs (UG NX, PTC CREO, SolidWorks) a plus



Min years of experience:  preferred 3 yrs minimum including experience with composites design

Degree Requirements:  BS in Engineering or Engineering Technology



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57875
Job Location: San Clemente, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer ( Goleta, CA ) 9115572 and 9246002

Description:
Design Engineer ( Goleta, CA ) 9115572 and 9246002
6 + Month Contract

Pay rate: $60/hr W2

Experience with Aerospace structures and mechanisms;
Proficiency in CAD software, and design experience with PTC Creo Parametric
Position is part of the Space Component Division, which specializes in deployable systems for spacecraft such as solar arrays, instrument booms, and various extendible support structures. A Structures and Mechanisms Engineer will be responsible for creating and implementing deployable structures and mechanical actuators at the cutting edge of space technology. Will have ownership of work from the concept creation through design phases and may also participate in manufacturing, testing, and integration of systems.

Responsibilities
• Create, prototype, design, and analyze structures and mechanisms for moving mechanical assemblies such as solar arrays, booms, and other support structures and mechanisms for satellite subsystems.
• Develop and refine components and subsystems utilizing design skills, hand calculations, and finite element analysis or other modeling tools as needed.
• Perform detailed 3D designs; generate CAD drawings and related documents, and support manufacturing and assembly of components.
• Spacecraft/aerospace materials experience for metals, adhesives, thermoplastics, etc.
• Ability to regularly work on site in Goleta, CA
• Proficiency with mechanical computer aided design (CAD) software, preferably design and analysis experience with PTC Creo Parametric 2/3.
• Practical understanding of GD&T (ASME Y14.5-2009) • Working knowledge of Microsoft Office suite (Excel, Word, PowerPoint…).
• Working knowledge of applicable manufacturing processes such as machining, finishing, and rapid prototyping.

Preferred
• Master's Degree in applicable area.
• Demonstrable problem solving skills with hands-on project experience.
• Candidate has detailed mechanical design knowledge of structures, mechanisms, release and drive actuators, and material selection.
• Experience with FEA analysis, preferably ANSYS or NASTRAN, for structural analysis of designs.
• 8 or more years of direct Mechanical Engineering experience, preferably in the spacecraft or aerospace industry, with significant project ownership
 
Job Number: 9115572 and 9246002
Job Location: Goleta, CA
Rate: 60
Per Diem: Yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer - Solidworks/AutoCAD

Description:
Aerospace experience required along with Solidworks/AutoCAD.
 
Job Number: 19-833
Job Location: Central USA
Per Diem: Yes
Overtime: Possible
Duration: 3 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer - Solidworks/AutoCAD

Description:
Aerospace experience required along with Solidworks/AutoCAD.
 
Job Number: 19-833
Job Location: Central USA
Per Diem: Yes
Overtime: Possible
Duration: 3 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer - Solidworks/AutoCAD

Description:
Aerospace experience required along with Solidworks/AutoCAD.
 
Job Number: 19-833
Job Location: Central USA
Per Diem: Yes
Overtime: Possible
Duration: 3 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer / Checker

Description:
Major purpose:

Responsibilities

• Plan, layout and revise detailed electrical parts, assemblies, and installation engineering drawings from basic layouts, established references, and standard data such as structures, devices, mechanics, electrical, or electronics

• Utilize computer-aided design equipment and/or graphic tools such as, AutoCAD and SolidWorks

• Complete details of major layout drawings prepared by others in accordance with standard engineering drafting practices

• Prepare specifications for parts lists, assemblies, and installations

• Prepare complete production detail drawings

• Contribute design modifications to improve quality of product or facilitate manufacturing operations

• Checking of electrical and mechanical drawings



Requirements:

• Associate's Degree or equivalent experience

• A minimum of 7 years recent relevant experience

• Experience with AutoCAD and/or SolidWorks

• Possess skills to prioritize assignments and flexibility to adjust to highest priorities depending on the program needs

• Must be familiar with Mil Std 100 / 1000 and MIL 31000T, ANSI Y14 drawings standards and aerospace documentation practices



Strongly preferred skills:

• Experience in Model Based Design

• Working with additive manufacturing techniques

• Experience with documentation of designs for additive manufacturing

• Checking experience



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 19-33462
Job Location: Arlington, TX
Rate: 37.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-02-28 00:00:00.0
Start Date: 2019-08-26 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Senior Components Engineer

Description:
We are seeking a Components Engineer with EWIS experience to fill an opening for an exciting company in Nagoya, Japan. Interested candidates should have at least 5 years of experience with electrical wiring interconnected systems (EWIS) specifically related to certification and airworthiness.

Responsibilities of the EWIS Senior Components Engineer

Evaluating aircraft design and creating analysis reports with respect to EWIS related airworthiness regulations of JCAB, FAA and EASA
Creating and executing the EWIS group certification plan.
Perform analysis for designs including the review of ground and flight tests, design reviews, inspections, and other system reports.
Review the preparation of documents defining aircraft environment and approved part usage.
Approve testing required for components and EWIS harness assemblies qualification.
Review of manufacturing processes related to EWIS harness assembly construction and installation.
Procure QTP/QTRs or similarity reports from EWIS components suppliers.
Create QTP and conduct the Qualification Test, then prepare the QTR/QSAR(Qualification Similarity Analysis Report).
Determine or update the qualification requirements of all EWIS components.
Create and manage a strategy for EWIS components qualification, including proposing alternative parts to reduce weigh and or cost.
Provide technical expertise and assist in resolving EWIS issues during any rig testing, Wire Harness manufacturing or Wire Harness Installation.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
5-10 years of experience with EWIS and air fact certification.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Educational Consultant

Description:
We are seeking an Educational Consultant fill an opening for a progressive technology company in Bellevue, WA. You will be a part of a team which will accelerate the adoption and improve user performance of state of the art software solutions. These solutions focus on revolutionary 3D software including 3D printing and virtual reality development.

Responsibilities of the Educational Consultant
Utilize unparalleled 3D technology that will revolutionize the Aerospace industry in terms of design, implementation and operation.
Participate in major projects to support customers’ digital transformation from legacy software to enterprise platforms.
Course design and Implementation.
With the training that will be provided, you will develop the skills to design and develop training and communications to support the customer's transformation plan.

Requirements

Engineering Degree or equivalent.
Experience with MS Office suite (Word, Power Point, Excel).
Excellent English written and oral communication skills.
General knowledge of aerospace and defense, consumer packaged goods and life science industries a plus.
 
Job Location: Bellevue, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer ( Chandler, AZ ) 9398686

Description:
Electrical Engineer ( Chandler, AZ ) 9398686
12 month contract

Pay rate: Open

Candidate will provide Electrical Engineering design support for the development of the OmegA launch vehicle.
Specific responsibilities include identifying and developing requirements for the electrical system, performing various related analyses, support of the integration of the vehicle avionics, the development of test procedures to ensure compliance of the vehicle subsystems and the implementation of these procedures on the integrated vehicle.
Successful candidate will be responsible for ensuring that design details are accurate and that Company design standards have been adhered to.

Other responsibilities include providing technical support on a variety of issues related to the electrical design and the associated hardware. Candidate should be able to demonstrate a strong attention to detail and work well with others. Design experience with aerospace/military electrical systems and associated hardware is preferred.
 
Job Number: 9398686
Job Location: Chandler, AZ
Rate: Open
Per Diem: Yes
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: TIM
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486

Description:
Electrical Engineer RF ( South Magna UT ) S9244486 and S9244486
12 Month Contract

Pay Rate: $60-65/hr W2

Required: • Active Secret DoD Clearance within 5 ½ years of last investigation

This position will support electromagnetics and radio frequency (RF) testing. Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must. The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up. Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Requirements & Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation

B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable
o Minimum 5 years with B.S. or related experience, 3 years with M.S.
o Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
o Solid background in electromagnetics
o Working experience with test and evaluation of microwave devices
o Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
o Experience with commercial data analysis software, such as Knowbell and/or Pioneer o Familiarity with Computational Electromagnetic (CEM) tools
o Willingness to work cooperatively in a team
o Proficient in MS Office suite oExperience fostering and leading in a culture of continuous improvement
oExcellent verbal and written communication skills

Desired Skills and Experience:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc
 
Job Number: S9244486
Job Location: Magna, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 months
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Packaging Engineer

Description:
Contract-to-hire opportunity located in E. Aurora NY.

Electronics Packaging Engineer
Essential job functions: This is a mechanical design engineering position within an EE design function. It entails the mechanical packaging of electronic circuits and related hardware.

Specific requirements are as follows:
-Experience with the packaging of electronics systems intended to be used in severe thermal and dynamic environments.
-Knowledge of materials and processes relevant to aerospace electronics.
-Experience with contemporary solid modeling tools such as Unigraphics NX.
-Knowledge of design techniques for high voltage systems
-Experience with FEM thermal and structural analysis tools such as ANSYS Workbench.
-Experience with Thermal Desktop and Icepak (nice to have)
-Knowledge of environmental test of aerospace electronics.

Required Education: BS Degree preferably in Mechanical, Aeronautical or Electrical Engineering plus six years minimum of design/development engineering experience.



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 6198
Job Location: East Aurora, NY
Rate: Hourly
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
MFC is looking for an experienced Software Engineer to develop embedded and application software. Selected candidate will integrate algorithms into C++ applications. Candidate is expected to be proficient in C/C++. It is desirable to have experience w/ both Windows Visual Studio & Linux based C/C++ development.

Missiles and Fire Control (MFC) is a recognized designer, developer and manufacturer of precision engagement aerospace and defense systems. This is Lockheed Martin’s lead business unit for research development and production of manned and unmanned ground-vehicle systems, electro-optical and smart munitions systems and is a pioneer in the field of versatile, high-performance missile and rocket technology.

Typical applications are software products related to image processing, target detection and tracking, missile guidance/ navigation/ control algorithms, missile launchers, system control, built-in test, and system communication. Development will be in C and C++ hosted on either a PC or Unix environment and targeted for an embedded processor running either VxWorks, Integrity or Linux as the real-time operating system. Familiarity with standard communication busses and protocols including RS-232, RS-422, MIL-STD-1553 and Ethernet is helpful but not required. The candidate will have experience with code implementation and integration and test. The candidate will be familiar with using source code control and issue tracking tools along with using modern test tools to do unit test and static analysis. An ideal candidate will be able to configure and manage a continuous test environment. Bonus skills would be familiarity with Agile development, Cyber Security, Department of Defense products, board support package and device driver development.

Skill/Experience/Education
Mandatory
It Is required that the candidate have experience with: Embedded software development C/C++ Various host computers including Intel Various real-time operating systems like Linux, VxWorks, Integrity Code and Unit Test Hardware/Software Integration Software configuration management Full software life-cycle development Ability to work with multi-disciplined teams Excellent communication skills US Citizen

Desired
It is desired that the candidate has experience with, or knowledge of, one or more skills below:
Agile development
Algorithm Implementation
Automated Test
Built-In-Test (BIT)
Cloud Deployment
Continuous test and integration
Controller Area Network (CAN)
Cybersecurity / Information Assurance / Anti-tamper
Data Distribution Service (DDS)
Defense industry software development
Design patterns
Docker
Driver development for Linux, VxWorks
Dynamic and static code analysis tools
Ethernet
Field testing experience
Formal verification and documentation
Git Lab
Hardware/software integration
Hardware-in-the-loop (HWIL)
Host Virtualization and Virtual Machine
HW/SW Integration
Hypervisor technologies for x86 architectures
Interface Control Documents (ICD)
Integrity Real-time Operating System (RTOS)
Jenkins
Jira
Kalman Filter applications
Kinematics
Linear algebra
MIL-STD-1553
Missile Reference Architecture
Multi-core and multi-threaded C++ programming
Multi-core processor code development
Operational Flight Program
Operational Flight Program software
Python
Rotating coordinate systems
RS-232 communication protocol
RS-422 communication protocol
Software quality assurance
Software Requirements Specification (SRS) development
Software-in-the-loop (SIL)
Stochastic systems
Subversion (SVN) versioning and revision control
Test plans and procedure development
UML design
Working in large code base
X86 Assembly
 
Job Location: Orlando, FL
Rate: 65-80/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manager

Description:
Position Summary

Nesco Resource in conjunction with a long standing client of ours in Phoenix has an exciting career opportunity in its Engineering organization. We are seeking a dynamic individual to play an integral role in developing, driving and supporting our business goals. The right candidate should have a proven track record of providing leadership and expertise in the application of engineering activities. If you are a talented, self-motivated individual that enjoys a fast-paced environment, and can focus individual and team energies to deliver results, you may be an excellent candidate to join our team.



Accountabilities

  • Plan, organize, and direct the activities of the engineering staff ensuring they provide the necessary technical support to manufacturing and quality to achieve division objectives.

  • Ensure that all manufacturing special processes and tooling conform to customer, organizational, and governmental standards.

  • Direct the development of new manufacturing processes and the revision of existing processes to facilitate the improved manufacturing of parts.

  • Develop, coach and mentor team of engineers to ensure the highest level of performance and standards of excellence.

  • Manages software control

  • Provide evaluation and disposition of discrepant material


Essential Skills and Experience

To perform the job successfully, an individual should demonstrate the following competencies:


  • BS in Mechanical Engineering

  • MS in Engineering or MBA preferred

  • Minimum of 5 years of engineering management experience; prefer that experience in the aerospace industry

  • Minimum 5 years of leadership experience

  • Familiarity with specifications, blueprints and requirements for aerospace component manufacturing that includes having knowledge of aerospace welding, coatings, heat treatment, machining and sheet metal fabrications

  • Documented formal process improvement experience; Six Sigma Green Belt preferred

  • Knowledge of CNC turning and milling

  • Experience managing maintenance in a TPM/Preventative Maintenance environment

  • Works well with people; good verbal and written communication skills

  • Must pass pre-employment and random drug tests as well as a background check.

  • Manages by way of participative leadership. Recognizes his/her emotions and that of his/her team and develops actions to motivate, inspire and direct in a more effective manner.




Reporting to This Position

10 to 15 direct reports



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38738
Job Location: Phoenix, AZ
Rate: 130000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Jennifer Blazsek
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Into Service Specialist

Description:
We are seeking an EIS engineer with working experience in commercial aerospace for an Original Equipment Manufacturer (OEM) as well as ample Entry into Service experience. Interested candidates will be responsible for coordinating all the processes, requirements and customer requests related to the Entry into Service of a new aircraft.

Responsibilities of the Entry Into Service Specialist

Coordinate and integrate all the areas responsible for the Entry into service including:
Flight operations engineering and pilots, training support, program management, material and services support and production lines.
Maintenance support and technical publications
Contracts management.
Air safety and certification teams and ground support equipment
Ensuring that the Master Plan agreed upon with the customer is complete following each deadline this includes the follow areas:
Initial Pilot Training
Initial Flight Attendant Training
Pilot Support (En Route Supervision)
Flight Operations Engineering Course (FOEC)
Flight Operations Engineering Support
Pilot Support (Ferry Flight)
RAS or SCAP Module
Inflight Performance Software
Performance SW
Reconfig. of the Flight Operations Publications Set
Dispatcher SW
Flight Dispatchers Course
Balance & Trim Chart
Maintenance Theoretical Type Training (B1 + B2)
Maintenance Practical Type Training (B1 + B2)
Technical Representative
Maintenance Specialists Support
Health Monitoring Training (Basic Module) & CMC Usage
Maintenance Program Start-up and Packaging
Reliability Training
Techpubs Subscription and training
RSPL Budgetary
MPD/MMEL
Suppliers Conference
TC Approval
Aircraft Operator Certificate Operational Approval
Direct Maintenance Cost
MRO Certification
GSE

Requirements of the Entry Into Service Specialist

Working experience in commercial aerospace with an Original Equipment Manufacturer (OEM).
8 or more years experience with Entry into Service for new aircrafts.
Excellent working relationship with airline customers and suppliers.
Knowledge of the aircraft delivery process.
Working experience in customer support industry and supplier negotiation.
Team management skills.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector

Description:
FAA Quality Inspector

Windsor Locks, CT
$43.56/hr
1 year W2 contract
Split Shift: M-W: 10AM-9:30PM
S-S: 7AM-12PM
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
The Customer Service organization is seeking an experienced quality professional to work on a variety of initiatives in support of quality performance initiatives. This is a unique opportunity for a compliance oriented quality professional interested in a technical and regulatory career as a representative for the Federal Aviation Administration (FAA). Upon hire, the selected candidate will work closely with experienced FAA ODAs to perform regulatory compliance inspections and technical document reviews. This experience will enable the individual to master the capabilities of independently evaluating material for correct technical content, accuracy and adherence to Company QMS. This will position the selected candidate on the career growth path to ultimately become an FAA Organization Designation Authorization (ODA). The individual is expected to develop core quality competencies for support of the quality team and quality initiatives. As part of the quality team the individual must utilize their interpersonal strengths to effectively communicate with internal and external customers to support quality escape investigations due to material shipping from the Distribution Centers. In this position there will be interaction with internal sites and external suppliers as needed to support quality objectives.

This position requires well rounded knowledge of aerospace systems; including but not limited to, hardware, LRUs, components, and test stand configurations. It requires ability to interpret and work from complicated drawings, specifications, procedures, and instructions to configure and inspect a variety of aerospace systems components, LRUs, modules, and associated materials.

Core Responsibilities
* Perform visual and dimensional inspection of major and minor components.
* Perform inspection of LRU assemblies.
* Perform quality evaluations of incoming customer returns to ensure compliance and document receiving issues.
* Support the DC Quality Clinic process to ensure compliance and process certification
* Files documents and maintain quality assurance record systems as required.
* Interface with multiple BUs to support high impact quality issues.
* Interface with DCMA as needed.
* Support CAB activities related to the DC.
* Internal and process audits.

Experience Required
* 5+ years relevant quality experience specific to Company product
* Minimum 3 years of inspection experience.
* Interpret and work from blueprints, overhaul manuals, customer specification, purchase orders, certification, written and verbal instructions
* Experience in using measuring instruments such as: calipers, micrometers, height gauge
* Experience interpreting drawing requirements
* Inspect and record all dimensions with applicable measuring tools
* Experienced in customer escape management (DIVE, RRCA, Mistake Proofing)
* Understanding of auditing requirements to industry and regulatory requirements (FAA Part 21 as well AS9100 / AS9120 preferred)
* Strong communications and interpersonal skills
* Good analytical skills to develop, monitor, and interpret key metrics and business indicators, as well as engineering print requirements
* Must have excellent organizational skills, able to work independently, and operate across organizational levels
* Computer skills- Proficiency in Word, Power Point, Excel, Access
 
Job Number: 11445
Job Location: Windsor Locks, CT
Rate: 43.56
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Construction Project Manager (Aerospace)

Description:
This Project Manager for ISR & SS Windsor Locks, CT facilities will provide professional Facility Engineering and Project Management to designated projects and assignments.

The candidate will be responsible for the Design, Development, Verification and Documentation of the Mechanical Infrastructure and Equipment used in fabricating, assembling, testing and inspecting products.

The candidate must work well with all functional groups and have good communications skills at all levels are required.

Candidate will interface with Windsor Locks Campus Services, Test Engineering, Program Personnel, Engineering Lab Personnel and Space Lab Personnel.

Projects range from small single tasks to larger scale construction projects including:
• Facility Upgrades,
• Facility Renovations,
• Special Projects, and
• Managing Equipment Installation.

The candidate will:
• assist in the selection and contracting process of consultants and construction teams as necessary for each project,
• provide hands-on involvement with equipment and processes by being available to the Operators, Maintenance Personnel, and other Facility Engineers
• gain intimate knowledge of processes and
• manage capital projects on time and within budget
 
Job Number: 1910103073
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Analyst - Aerospace Experience

Description:
Johnson Service Group (JSG) is teamed with a leader in the aerospace, defense, and commercial markets, and we are seeking a talented Financial Analyst to support government accounting, including proposals, pricing, and auditing requirements.

Scope of Experience and Responsibilities:

4-6+ years of related finance/accounting experience in government contracts, subcontracts, estimating and pricing, finance, or business administration in a defense/aerospace manufacturing environment.
Experience with cost, proposal pricing and estimating is required.
Experience in conducting direct and indirect rate audits and working with DCAA and DCMA auditors is required.
Provide cost estimating and Truth in Negotiation Act (TINA) proposals.
Participate in the preparation and submission of Forward Pricing Rate Agreements (FPRP) and the annual incurred cost submission (ICE) to ensure compliance with all applicable regulations (FAR, CAS).
Conduct audits and analysis of subcontractor or supplier proposals.
Conducts fact finding at supplier locations as needed to review basis of estimates and source documentation verifying proposal cost estimates.
Serve as the point of contact with Defense Contract Audit Agency (DCAA) auditors.
Prepares and coordinates responses to DCAA audits and System Reviews.
Strong hands-on understanding of pricing and purchasing theories, concepts and principles.
Will contribute in developing proposals to support new business opportunities with engineering, sales, and program management teams.
Experience in cost/price analysis supporting DoD programs.
Proficient with MS Office, and advanced knowledge of Excel and SAP (or a similar ERP system).
Effective oral and written communication/presentation skills.
Strong analytical, organizational and interpersonal skills.
Ability to communicate effectively with all levels within the organization.
Education:

Bachelor's Degree in Accounting, Finance, Economics, or a related discipline is required.
Master's Degree in Accounting, Business Administration, Finance, Economics, or a related discipline is a plus.
Certifications: Desired certifications include CPA, CMA, CIMA and/or ACCA.
 
Job Number: 375232
Job Location: North Los Angeles, CA.
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Engineer

Description:
We are currently seeking a for an experienced Flight Control Engineer to fill an opening for an aerospace company located in Renton, WA. Interested candidates should have experience with Verification and Validation as well as aircraft level requirements for flight controls systems.

Responsibilities of the Flight Control Engineer

System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test and aircraft/system qualification and certification.
Author flight test and ground test specifications for Flight Controls Systems.
Analyze test data and evaluate system operation.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Prepare test reports.
Evaluate requirements for traceability, correctness, and completeness.
Provide analysis and input as required to verify compliance with ARP4754A and DO178C.
Initiate and validate improvements to the design and documentation of the Flight Control System
Ensure all schedule and cost objectives are meet as described.


Requirements

Bachelor, Master or Doctorate of Science degree in Engineering, Computer Science, Mathematics, Physics Or Chemistry.
7 plus years of experience with flight controls in terms of both software and hardware.
Excellent communication skills both written and verbal.
Expert knowledge of ARP 4754 and DO178C.
DER, UM, DAD Certification active or previous is highly preferred.
 
Job Location: Renton, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Systems Engineer

Description:
We are seeking a Flight Control Systems engineer to fill an opening for a company located in Nagoya, Japan. Interested candidates should have a 4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation) as well as 5 plus years of flight control and dynamics experience.

Responsibilities of the Flight Control Systems Engineer

Design and test Servo-Hydraulic flight control actuators for fly-by-wire aircraft platform.
System design, requirements management, systems specifications, interface management, system safety assessment, verification and validation testing, aircraft flight test, and aircraft/system qualification and certification.
Capture aircraft-level, system-level, and equipment-level requirements, in addition to associated validation evidence using IBM Rational DOORS in accordance with substantiated monitor design details.
Define primary and secondary Flight Control System schematics and architecture.
Perform clean sheet component layouts for Flight Control Systems in support of schematic architecture.
Perform kinematic studies and system performance analysis for powered Flight Control Systems.
Have the ability to generate Flight Controls certification documents in support of design and qualification requirements.
Implement design solutions optimized for cost and weight.
Serves as a primary interface within the Flight Control Systems group to ensure effective communication, coordination and timely completion of project milestones.
Leads or participates in design and development reviews with management and internal customers, deliver technical presentations effectively to a diverse and demanding audience.
Investigate and disposition production line build issues and be familiar with Material Review Board processes.

Requirements of the Flight Control Systems Engineer

Possess a fundamental understanding of aircraft system development principles, including SAE ARP4754A, SAE ARP4761.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
5 plus years of flight control and dynamics experience.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Loads Engineer

Description:
Flight Loads Engineer

Location: Philadelphia, PA

Responsible for determination of flight loads and ground loads to ensure the aircraft design is structurally sound. Develop documentation to show compliance with structural design maneuvers.



Job Responsibilities:

• Define and validate aircraft flight and ground loads through simulation and flight test data analysis of AW609 tiltrotor structural design maneuvers. Utilize knowledge of aeromechanics to ensure analysis and results can be used to show compliance with certification rules.


• Modify flight simulation script files to improve efficiency, ensure simulated maneuvers are compliant with regulations, and produce sensitivity studies of various aircraft configurations.


• Deliverables include flight simulation time history data, well commented scripts (python, pearl, bash), recommendation and conclusions of analysis conducted.


• Support activities and requests from the FAA related to flight loads analysis and methodology.


• Provide support analysis for activities lead by Aeromechanics disciplines (Aerodynamics, Handling Qualities, Structural Dynamics, Rotor Dynamics), Flight Controls, and Flight Test teams.


Qualifications:


• Must be a US Person (Citizen or Green card) to operate ITAR controlled flight simulation software


• BS degree in Engineering; MS degree Aeronautical Engineering preferred


• 5+ years’ experience in a technical leadership capacity related to aircraft aeromechanics, aerodynamics, guidance navigation and controls (GNC), experimental flight test, flight loads definition/validation, flight simulation, handling qualities, or flying qualities.


• Experience with scripting languages such as Pearl, Python, Matlab, Octave


• Experience developing structural design criteria and/or performing flight and ground loads testing, simulation, and analysis


• Strong analytical skills. Ability to understand complex systems and aircraft flight characteristics.

• Strong written and verbal communication skills. Ability to communicate at all levels of the organization, identify solutions in the presence of conflict and ambiguity



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57678
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Technical Writer

Description:
Flight Technical Writer (L3) 

Location: Shelton, CT



Summary/Objective



Butler Aerospace & Defense is seeking an experienced technical writer to work in our writing group authoring flight manuals (i.e., Operator’s manuals and associated Checklists).  This position is in support of contracted technical manual revision services and the creation of new publications.



Areas of Responsibility/Essential Functions



Under general direction and according to standard practice, the technical writer works independently on the analysis, organization, and writing of assigned portions of aircraft flight publications.
Performs a variety of duties in preparing technical writing assignments, covering portions of aircraft flight publications
Research, writing, and development of portions of aircraft flight publications according to the governing specification and published standard work
Develop concise, complete, technically accurate, and easy to understand technical information in a timely fashion with a very high level of quality
Exercise initiative and judgment in carrying out detail writing assignments working from engineering drawings, specifications, performance data, or other similar literature. Judgment required compiling and selecting technical data for text and illustrations
Develop and coordinate the revision/creation of technical illustrations with illustrators on form and content of illustrations in support of  aircraft flight publications
Provide frequent status to supervision
Meet established internal and external delivery milestones
Interface with engineers and pilots over the content and review of the publications when required
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job.


Competencies



Technical Skills, Knowledge, and Abilities



Ability to write flight procedures from engineering drawings, specifications, performance data, or other similar literature
Ability to write operator procedures for aircraft with integrated avionics suites (i.e., “glass cockpits”)
Familiarity with the operation of aircraft systems
Ability to dissect complex and interdependent processes into discrete and detailed steps to enhance end-users ability to understand and follow the directions
Ability to read and interpret original equipment manufacturer (OEM) manuals
Ability to read and interpret military and commercial specification and standards
Strong analytical and complex problem solving skills
Ability to self-edit written and graphical work
Proficient with desktop publishing using content management software
Proficient with SGML/XML structured document authoring such as EpicEditor or equivalent
Proficient with various research (i.e., customer-specific) applications for technical issues
Strong computer skills with a working knowledge of Adobe Acrobat and Microsoft Office
Preferred, but not required:
Military and/or civilian pilot license
Military and/or civilian flight experience
Experience with rotary wing aircraft
A&P mechanic’s license, or equivalent military experience in aircraft maintenance
Ability to use of aircraft technical manuals and related technical data
Experience with Content@ content management software and XyVision publishing software


               Interpersonal and Communication Skills



Professional communication proficiency with written and verbal English and in-depth knowledge of engineering and other technical terminology
Professional communication proficiency to interact effectively with coworkers, supervisor, managers, and customers
Ability to work collaboratively with others
Ability to manage multiple projects with tight deadlines in fast-paced and dynamic environment
Ability to demonstrate initiative and be self-motivated
Organizational skills
Time management skills
Detail orientation
Task and goal-orientation
Quality-driven
Responsive and time-sensitive to customer’s delivery schedule
Strong, customer-focused work ethic and positive attitude
Ability to mentor less experienced and knowledgeable writers on the team


Work Experience



Minimum 2 years technical writing experience



Required Education



Requires advanced knowledge of technical publications writing.  Must have understanding of engineering specifications drawings, designs, and English composition.
Associate or Bachelor’s degree, or equivalent trade experience


Supervisory Responsibility



This position has no supervisory responsibilities.



Work Authorization/Security Clearance



Work authorization: Must be a U.S. person with the ability to work in the U.S.
Security clearance: Required for some assignments at Top Secret level


Work Environment



This position operates in a professional office environment.
This position routinely uses standard office equipment such as computers, phones, photocopiers, printers, and fax machines.


Travel



Limited travel maybe required to support validations.





Additional Eligibility Qualifications



None



Special Demands



None



Other Duties



Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice due to business needs.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57052
Job Location: Shelton, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Project Engineer

Description:
An experienced professional is needed for the Future Attack Reconnaissance Aircraft (FARA) program.

The candidate will support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.

They will act as Project Engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm.

They will:
• Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
• Support and manipulate Microsoft based tools in support of project schedule and status.
• Communicate with other program integrated product teams.
• Compile and analyze performance reports.

The ideal candidate will have:
• Superior business and data skills,
• Knowledge of IMS based project management and can work in a team environment.
• Understanding of Aerospace, Helicopter and / or development program experience
• Knowledge of mechanical / structural design and test

Looking for someone who can jump in, learn the tools and support this ambitious test program. Someone who has been around development programs, engineering and / or even test. The job is Project Engineering and will be asked to support those engineers who are running the test, enable them and support the Programmatics.
 
Job Number: 1910107247
Job Location: Stratford, CT
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer

Description:
Hardware Engineer

Location: Driftwood, TX

12+ month contract



The primary responsibility of this engineer is the design and development of high-performance RF and microwave products. As a HW Engineer, you will be an integral part of a project team responsible for designing and developing a product from concept to release.

In addition to solid hardware engineering practices, you will be expected to be familiar with a wide variety of sophisticated test equipment, define and execute comprehensive test plans to debug and validate the performance of complicated circuits and modules, as well as develop and implement sophisticated calibration algorithms.

You will also be directly involved in setting specifications and transitioning the product from engineering to production. In this role, you will have the opportunity to develop and to implement automated test platforms, integrating both hardware and software, which are consistent with a high-mix, low-volume, high-tech, and high-quality operation.

Job Responsibilities

Specify, design, and implement complex hardware modules and sub-systems

Design and implement automated test solutions for microwave and RF Products.

Identify and resolve technical problems that often occur during development of new products.

Define and implement project plans, manage milestones, and hold required reviews to assure test system readiness for product release.

Integrate hardware and software to fully support new RF products under development.

Utilize programming skills to develop automated test using LabVIEW

Design measurement algorithms for RF products.

Review and approve product specifications and customer user documentation for the product.

Requirements

B. S. or M.S. in electrical engineering, electronics engineering.

Good understanding of computers and LabVIEW

Passion for learning about and working with test and measurement industry technologies

Strong work ethic and drive to succeed

Preferred skills:

Strong understanding of RF systems, RF measurements, electronics, computers, and high-level programming languages (LabVIEW, TestStand, C/C++, Python)

Familiarity with S-parameter measurements, power accuracy, and digital modulation standards

Knowledgeable about gain, compression, and intermodulation measurements

Sources of measurement errors

Appropriate selection of RF and microwave instrumentation

Statistical analysis of data

Experience with using RF/Microwave Test Instrumentation like Oscilloscope, DMM, Signal Generators, Spectrum Analyzers, Network Analyzers and Power Meters.

Demonstrate ability to:

Work effectively in a group development environment

Effectively diagnose technical issues and propose reasonable solutions

Problem-solve effectively - diagnose technical issues and propose reasonable solutions

Take ownership of goals, project schedules, and milestones

Listen attentively and grasp fast-paced technical conversation

Quickly learn applicable technology, systems and commercial off the shelf components

Adequate knowledge of reading schematics and data sheets for components

Strong documentation and writing skills





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57826
Job Location: Driftwood, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer ( Clearfield, Utah ) S9244989

Description:
Industrial Engineer ( Clearfield, Utah ) S9244989
4+ Month Contract

Pay rate: $60-75/hr W2

**Candidate must have active secret clearance with last investigation within the last 4.5 years. Candidate will have to obtain SAP Clearance.

Managing schedules and assembly spans Aerospace assembly experience

Top three skills:
• Shop operating plans
• Standard hour development/application
•Capacity/staffing forecasting

Possible Job Duties: • Industrial Engineering accountability will include, but not be limited to the following:
o Manufacturing capacity analysis
o Positional tooling and machine requirements
o Work measurement / time standards development
o Production performance metrics and analysis
o Special studies and projects
o Staffing models
o Production readiness assessments
o Recovery planning
o Facilities and workplace design
o Lean Implementation
o Simulations

Requirements & Qualifications:
• Bachelor’s degree and 4 years’ experience or an MS degree and 2 years’ experience.
• In depth understanding and significant application of Industrial Engineering technical expertise along with a detailed knowledge of other related disciplines
 
Job Number: S9244989
Job Location: Clearfield, UT
Rate: Open
Per Diem: yes
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Weight Engineer

Description:
We are seeking an experience Weight Engineer to fill an opening for an aerospace company in Nagoya, Japan. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

Responsibilities of the Lead Weight Engineer​

Aircraft weight reduction activity and design weight growth study.
Certification activity related to weight and C.G.
Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
Checking the status and forecast of aircraft weight and C.G.
Checking the status weight of system and structure component vs target weight along with determining or revising the design weight and C.G. envelope.
Designing weight growth plans.
Preparation of weight report and mass data for analysis, tests and manufacturing tooling process.
Preparation of weight and balance manual.
Improvements of weight data gathering and verification process.

Requirements Lead Weight Engineer

15 plus years of aircraft certification experience in relation to weight and center of gravity.
Extensive flight test experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison Engineer

Description:
POSITION SUMMARY:
The senior liaison engineer performs design updates, documentation and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be the functional focal point on large programs. The engineer will be responsible for creating and revising design data in support of cabin monument build and structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.


ESSENTIAL JOB FUNCTIONS:
1. Supports production needs as required when modification questions arise.
2. Addresses complex production issues related to engineering design.
3. Acts as the functional lead on large programs, which require multiple liaison engineers.
4. Revises mechanical designs to aircraft primary or secondary structures for VIP business aircraft.
5. Revises cabin monument designs for VIP cabins.
6. Designs repairs for aircraft structure that are beyond the scope of repair documentation
7. Coordinates with Engineering project leads on redesign efforts
8. Provides guidance and feedback to other engineering personnel.
9. Supports the integration of structural and systems installation components within the aircraft configuration.
10. Ensures designs meet customer criteria, quality standards and FAA requirements.
11. Achieves established metrics for timely resolution of production issues during the program.
12. May represent the department during production meetings.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. Five or more years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design (SolidWorks preferred)
2. Aviation background and aircraft interior experience preferred.
3. Expert knowledge of mechanical design and documentation standards.
4. Ability to work independently and cross-functionally.
5. Strong communication and problem-solving skills.
6. Strong time management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 341
Job Location: IN
Rate: $60-$65/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Management Analyst

Description:
Location: Fort Worth, TX
Rate: $39.41/HR
Duration: 1 year contract
Shift: Must be able to work evenings and flexible hours

****MUST be a U.S. Citizen****

Job Description:
1. A position within the Export & Dangerous Goods Control Team supporting an aerospace production and global sustainment enterprise.
2. Primary tasks to include providing dangerous goods packaging instructions, compliance inspections and execution of required certifications for all modes of transportation.
3. Responsibilities include interfacing with multiple internal departmental contacts across our client as well as freight forwarders, personnel stationed at various air force bases, international partners, and local country nationals.
4. Must be able to interpret and apply legal regulations for Air (IATA/ICAO), land (49 CFR), and sea (IMDG) to products offered for shipment to domestic and international locations, some of which require multiple modes of transport.
5. Must be able to communicate effectively with personnel from multiple internal business areas to explain requirements and obtain additional information regarding offered products.
6. Must continuously monitor regulations and work with department leaders to maintain current requirements for dangerous goods packaging and shipping.
7. Must possess strong organizational skills and maintain all records and counts for time period required by external regulations and internal policies.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
2. MS Office experience required.
3. SAP experience preferred.
 
Job Number: 11208
Job Location: Fort Worth, TX
Rate: $39.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
MRB Engineer

Location: Milledgeville, GA

12+ month contract

Call Laura Leszek at 765-427-4721 if you are interested after reviewing the details!

Our client has an immediate opening for an Aircraft Structural Liaison Engineer with 15+ years of experience to review and provide dispositions to non-conforming composite and metallic detail part and assembly withholding tags. This role will be responsible for Boeing Commercial structure and/or systems repair creation therefore familiarity with Aerospace Material Review Board processing and Boeing D-13709-4 'Requirements of Obtaining Material Review Board Authority by Boeing Subcontractors' specifications is a must and should be capable of conveying engineering dispositions part/assembly meeting design intent. 

Responsibilities

Provide MRB Engineering Support to Operations to address issues occurring during the fabrication of aircraft and/or aircraft components in support of the Boeing programs.
Liaison Engineering functions to include investigation of mfg. issues, design of repairs, engineering support to manufacturing for dwg/spec interpretation, coordinating efforts across a multiple functional organization, such as Planning, Tooling, Stress, M&P, Materiel, and Manufacturing.
Coordinates with other engineering organizations to ensure that repairs meet customer and contractual requirements. 
Provides technical assistance and direction to team members as required.
Determines and develops own approach to solutions within schedule and cost objectives while working under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives.
Failure to obtain results or erroneous decisions or recommendations would typically result in serious program delays and considerable expenditure of resources.
Frequent inter-organizational and outside customer contacts.
Represents the organization in providing solutions to difficult technical issues associated with specific projects.
Qualifications

Successful candidates typically possess

BS Engineering (Aerospace, Mechanical, or Civil Engineering) from an accredited program recognized by the Washington Accord
15-20 years experience of Aerospace Engineering
Prior Boeing Commercial MRB Liaison Signature Authority with successful completion of Boeing MRB Structural Repair Analysis Course, or equivalent a plus.
Strong interpersonal skills with ability to interface with customers at all levels 
Exceptional time management and organization skills
Strong analytical skills


____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57254
Job Location: Milledgeville, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner

Description:
Location: Palmdale, CA
Rate: $48.86/HR
Duration: 8 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation must be completed within the last 5-years****

Job Description:
1. Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
2. Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Required Skills:
1. Microsoft Project and/or Open Plan Experience.
2. Milestones Professional Experience.
3. Proven Planning and Scheduling Expertise.
4. Proposal and Program Execution Experience.
5. Demonstrated Earned Value Management System (EVMS) Experience.
6. DCMA Schedule Metrics/Data Driven Metrics Knowledge.
7. Schedule Risk Analysis SRA experience.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11150
Job Location: Palmdale, CA
Rate: $48.86/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 8 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Windsor Locks, CT
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional:
The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is an individual contributor level position. 8-15 years’ experience desired. The candidate must be a US person. Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection. Previous experience in aerospace structures and engineering fluid component design required. Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired. Knowledge of drawings, geometric tolerancing, and drawing interpretation. Experience with manufacturing techniques for limited production hardware. Ability to work within a matrix organization to achieve team and program goals. The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 11368
Job Location: Windsor Locks, CT
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (7-10+ yrs exp)

Description:
This position will contribute to the design of precision optical systems and tooling.
Responsibilities include opto-mechanical and electro-mechanical design of aerospace flight components. Responsibilities include providing solutions to a variety of complex technical problems as assigned.

Role and Responsibilities:
Lead and direct opto-mechanical engineering on multiple projects through all phases of innovation and development
• Assume primary responsibility for the design, analysis, and documentation of opto-mechanical systems; these systems are typically deployed in an industrial or aerospace environment and may have significant electronic content
• Direct the activities of other Engineers and provide technical direction to other stakeholders including Manufacturing, Purchasing, Quality as necessary
• Provide technical content for proposals, estimate and track mechanical design costs, create schedule estimates, and make presentations to customers and company management.
• Create system models, perform required analysis, and create detailed part and assembly drawings and associated parts lists, in accordance with ANSI Y14.5 and inhouse drawing standards.

Basic Qualifications:
• US Citizenship is required.
• This position requires a Bachelor’s degree in the appropriate discipline and 7 years of relevant experience or an advanced degree in the appropriate discipline and 5 years of experience. In the absence of a degree 11 years of appropriate experience is required

Required Skills:
• Have a thorough understanding of Mechanical Engineering principles, theories, and applications
• Demonstrates a solid understanding of optics and opto-mechanical best practices and basic understanding of the other engineering disciplines
• Ability to use hand calculations for preliminary sizing and for FEA validation
• Able to analyze, problem solve, multi-task and meet deadlines
• Able to clearly describe results in oral presentations and written reports
• Results-oriented with strong personal drive and personal ownership in meeting commitments
• Excellent organizational skills and attention to detail.
• Operate independently with limited supervision
• Impeccable ethics; maintains a positive and professional working environment
• Strong CAD solid modeling experience with ANSI Y14.5 knowledge
• Proficient in CREO (Pro-E) and PDMLink or similar CAD tool

Preferred Skills:
• Advanced technical degree
• Finite Element Analysis using NASTRAN
 
Job Number: 1910107083
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (7-10+ yrs exp)

Description:
Primary duties may include:
• Perform Mechanical Analyses. Analyze mechanical components and subsystems using both common application programs and more advanced programs such as NASTRAN, Thermal Desktop and PATRAN or FEMAP. Performs kinematic, dynamic, heat transfer and/or vibration analyses on one or more complex materials, structural components or functional systems. Perform trade studies and document results for presentation to senior program staff. Types of hardware analyzed will include aerospace structures, optomechanical assemblies and other electronics boxes and structures.
• Provide Design Input. Provide design guidance for optomechanical and other structures based on experience as well as analysis results. Inputs should take into account program technical requirements as well as program cost, schedule and technical risk appetite.
• Guide Test of Hardware. Provide input to optomechanical hardware test plans with particular focus on achieving correlation between test and analysis.
• Maintain and Continuously Improve Group Optomechanical Analysis Knowledge Base. Plan and execute process for maintaining best practices and lessons learned for optomechanical specific analysis information. Coordinate and direct the work efforts of lower level engineers and support personnel, if assigned. Maintain up-to-date knowledge of developments in the analysis discipline. Suggest and plan initiatives to grow capability and knowledge when needed.
• Document the Product Development. Generate, review and approve written reports supporting the design, analyses, and test of the product design including drawings, engineering specifications, and other associated documentation. Report on project status and progress measured against specific plans. Prepare design review packages and present data to both internal and external customers.
• Implement Continuous Improvement. Implement the Mechanical Design Process in work plans and adhere to our Quality System. Provide feedback to improve the process, and work to meet engineering objectives. Maintain up-to-date knowledge of developments in the mechanical engineering disciplines. Ensure cost effectiveness and manufacturability of design.
• Perform Other Duties. Coordinate and direct the work efforts of lower level engineers and support personnel, if assigned. Assignments may include development of new techniques as a result of independent study, materials development and support of proposal efforts. Perform other duties and responsibilities as required.

Education
Bachelor's Degree in a related field, MS a plus. Typical 7 years work experience or equivalent experience

Typical Related Experience
• Developing mechanical requirements, designs, verification and validation of products, and product integration required. Experience using state-of-the-art technology, principles, tools and concepts required. Experience with mechanical development lifecycle and development processes and procedures required.
• Working knowledge of commercial and military specifications and standards related to mechanical design and documentation required.
• Ability to read and understand engineering drawings, run-lists, and schematics required.
• Knowledge of tools such as CAD and FEA (thermal and structural background and experience) required.
• Entry level leadership experience required.

In addition to the items listed above, the essential functions include:
• Exercise discretion and independent judgment in the performance of duties set forth above.
• Communicate effectively both orally and in writing;
• Exhibit sound interpersonal skills involving interfacing, coordinating and negotiating with company personnel, customers and suppliers;
• Utilize computer skills to prepare appropriate reports and documents;
• Make decisions using sound judgment while complying with policies, procedures, appropriate principles and applicable state and federal laws and regulations;
• Analyze, evaluate, develop and implement processes and systems within budget and adhere to time requirements and schedule;
• Design and develop products and services using state of-the-art technology, principles, theories and concepts.

Preferred Skills and Education
• NASTRAN experience (static stress resulting from loading due to inertial effects, shock, applied pressure, and thermal expansion mismatch, modal, forced response, bolted joint, heat transfer, fatigue)
• Thermal Desktop Experience as well as fluid flow, pressure drop and matching fans/pumps with flow resistances.
• Experience with hand calculations (including Excel and Mathcad or equivalent) to bound problems and provide preliminary estimates
• Experience correlating analysis to test for optomechanical hardware/systems
• Experience with complex materials (such as composites, engineering plastics)
• Experience in the Defense Electronics/Optical/Aerospace industry
• PTC Creo experience, PDMLink
• US Citizen Required
 
Job Number: 1910107080
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: split
Overtime: yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Engineer

Description:
As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the aircraft.

• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
• Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
• Provide validation and verification of powerplant subsystems requirements
• Perform powerplant subsystems tests and certification, and provide system and certification documentation
• Manage the powerplant subsystems scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft



The Structures Company is an AA/EOE.
 
Job Number: 346
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Engineer

Description:
Summary
As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the business jet.

On any given day you might:
• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
• Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
• Provide validation and verification of powerplant subsystems requirements
• Perform powerplant subsystems tests and certification, and provide system and certification documentation
• Manage the powerplant subsystems scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule

We're looking for someone who has:
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft
• 2+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing powerplant systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
• Strong customer focus with experience in a global environment working with customers and suppliers
• Strong/proven problem-solving skills across multi-disciplinary skill sets
• Strategic leader with very strong decision making and communication skills

We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
 
Job Number: 42-037
Job Location: Reno, NV
Rate: Competetive
Per Diem: YES
Overtime: Possible
Duration: 1+year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Opto-Mechanical Engineer (10-15+ yrs exp)

Description:
This position will contribute to the design of precision optical systems and tooling. Responsibilities include opto-mechanical of aerospace flight components and providing solutions to a variety of complex technical problems as assigned.

Roles and Responsibilities:
Lead and direct opto-mechanical engineering on projects through all phases of innovation and development
• Assume primary responsibility for the design, analysis, and documentation of opto-mechanical systems; these systems are typically deployed in an aerospace environment
• Direct the activities of other Engineers and provide technical direction to other stakeholders including Manufacturing, Purchasing, Quality as necessary
• Provide technical content for proposals, estimate and track mechanical design costs, create schedule estimates, and make presentations to customers and company management.
• Ability to develop system level design trades to meet optical performance requirements.

Education/Certifications
• BS in Mechanical Engineering with 10 or more years related experience

Experience/Qualifications
• Have a thorough understanding of Mechanical Engineering principles, theories, and applications
• Demonstrates a solid understanding of optics and opto-mechanical best practices and basic understanding of the other engineering disciplines
• Experience in the mechanical design of mirrors, mirror flexure mounts and metering structures (telescopes).
• Experience in the mechanical design of stable platform gimbals
• Experience with performance error budgets of optical systems
• Able to clearly describe results in oral presentations and written reports
• Experience with FEA structural analysis (static and dynamic)
• Results-oriented with strong personal drive and personal ownership in meeting commitments
• Excellent organizational skills and attention to detail.
• Operate independently with limited supervision
• Impeccable ethics; maintains a positive and professional working environment
• Understanding of CREO (Pro-E) and PDMLink or similar CAD tool
• US Citizenship is required.

Preferred Qualifications
• Advanced technical degree
• Finite Element Analysis using NASTRAN
 
Job Number: 1910107092
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer (Aircraft)

Description:
The Product Engineer will be responsible for mid to high complexity projects with high complexity-related to general engineering and technical process improvements.

They will:
• Provide experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
• Provide experienced engineering support for operations, supply chain, quality, technical publications and program management.
• Provide sustaining engineering support to airlines and other aftermarket customers.
• Update engineering documentation through Engineering change orders and Document Change notices.
• Communicate with internal and external customers on a regular basis.
• Lead teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
• Provide root cause and corrective action investigations.
• Have direct interface with external customers on engineering issue resolutions and product improvements.
• Support after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained
• Support Material Review Board (MRB) evaluation and disposition.
• Ensure quality products utilizing company quality procedures.
• Audit work areas for safety compliance.
• Adhere to all company rules and codes of conduct.

Education
Bachelor of Science - STEM, Mechanical or Aerospace Engineer, General Engineering, Engineering Physics, or similar.
 
Job Number: 1910107491
Job Location: CO Springs, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Assemblers

Description:
Principal Duties and Responsibilities:

Performs manual/mechanized assembly operations.
Responsible for adhering to all safety and quality requirements.
Process specifications using hand tools, machinery, air presses, jigs and other equipment and tooling.
Must be able to follow work instructions.
Performs other operations such as loading and unloading components into tooling and powders into cups to press.
Job Specifications:

High school diploma or equivalent required.
Must demonstrate the ability to set up and monitor equipment through written and verbal instructions.
Minimum 2 years manufacturing related experience with the ability to use and read accurately various measuring instruments.
Ability to perform fine mechanical assembly including resistance welding, light machining, and electrical testing
Certified soldering skills per J-STD/NASA a plus.
Defense and Aerospace Industry experience including working knowledge of company product lines a plus
 
Job Number: 376238
Job Location: Moorpark, CA
Per Diem: No
Overtime: Possibly
Duration: 3 Mon-Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Manager

Description:
Johnson Service Group (JSG) is seeking a talented Program Manager to assist in managing the planning and execution of major projects for our global. global aerospace and defense customer.

Scope of Experience and Responsibilities:

2+ years of related program management and/or coordination experience within the aerospace, defense, automotive and/or energy industries.
Program Management knowledge with New Product Introduction (NPI) is a plus.
Experience with high reliability and low volume E/M products is a plus.
Will support engineering and act as a customer interface.
Support project milestones, costs and deliverables.
Ensure that customer satisfaction objectives are met.
Track and report project status and progress.
Knowledge of
PLC (Product-Life-Cycle) process and related tools is a plus.
May act as the primary point-of-contact with client customers.
Contribute to strategic and cost planning, and
change of project scope.
Align with sales and business development team, including assistance with proposal development.
Interface with manufacturing and supply chain to ensure quality, technology, delivery and delivery capacity expectations are met.
Must have strong strategic planning skills.
Six Sigma, Lean and continuous improvement knowledge is a plus.
Education/Certifications:

A technical or business Bachelor's Degree is required
MBA or equivalent Master's Degree is a plus, but not required
PMP certification is preferred.
Duration: Direct Hire

Location: Greater Los Angeles, CA area

Compensation: Highly competitive, including a highly competitive salary, bonus, and comprehensive benefits.
 
Job Number: 375135
Job Location: North Los Angeles, CA
Per Diem: No
Overtime: Possibly
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer-Test reliability

Description:
Description:
Experienced professional needed for FARA program. Support and manage the development, coordination and reporting of Ground Tests, Supplier Qualification activity and subcontractor management.

Act as project engineer to provide project management, metrics and business analysis including support of Earned Value Management System monthly rhythm. Integrate program requirements for functional facilities and other with overall company demand for Ground Test services.
Support and manipulate Microsoft based tools in support of project schedule and status. Communicate with other program integrated product teams.
Compilation and analysis of performance reports.

Ideal candidate would has superior business and data skills, knowledge of IMS based project management and can work in a team environment. Understanding of aerospace, helicopter and / or development program experience preferred.
Knowledge of mechanical / structural design and test a plus.
- Looking for someone who can jump in, learn the tools and support this ambitious test program.
Someone who has been around development programs, engineering and / or even test would be great.
The job is project engineering and will be asked to support those engineers who are running the test, enable them and support the programmatics.

Hema Murali
Technical Recruiter — Windsor Locks, CT
hmurali@apollopros.com
860-254-6337
 
Job Number: 860-254-6337
Job Location: Stratford, CT
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Hema Murali
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager - Aerospace

Description:
We are seeking an aerospace project management expert to fill an opening with a company in Nagoya, Japan. Interested candidates should have 10 plus years of aerospace related experience including certification knowledge as well as exceptional leadership and project management skills.

Responsibilities of the Project Manager

Perform all Project Management duties required to finalize aircraft development and Type Certification and Entry into Service.
Provide evaluation of current aircraft design status until Type Certification is granted by the main certification agencies.
Preparation and maintenance of a General Schedule for all activities in the group in consistency with the Master Schedule.
Preparation of lower level schedules and support for sub-group leads in assignment of resources.
Continuous understanding of progress of supplier’s activities to ensure consistency with program schedules.
Keep management and relevant members of the team informed on progress of significant activities.
Planning and coordinating integration of design change activities.
Understand all assigned systems contract requirements in support of suppliers.
Provide expertise scheduled activities related to solving planning issues and concerns raised during any testing, Flight testing or otherwise.
Manage and monitor overall project budget with support from financial controller.
Identify, manage and follow up project risk, issues and opportunities.
Establish and maintain proper communication with assigned IPT team, provide guidance to IPT team meet project commitments and deliverables in order to secure program schedule.

Requirements of the Project Manager

Minimum 10-years of experience in aerospace required.
Strong skills and experience coordinating with other division and leading projects.
Aircraft systems and/or project management experience.
Excellent overall knowledge about aircraft manufacturing and certification program.
Prior experience creating governance structure and KPI.
Have high level communication skills, energetic and driven to complete projects.
Proficiency with MS Project and MS Excel.
PMP certification and cost/budget management is preferred.
Candidates must be fluent in both written and spoken English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer

Description:
Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.


Position Purpose:

A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning. Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies. The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group. Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities. Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:

Essential Functions:1. Develop quality control methods required for the product or service of the area. 2. Prepare department procedures and instructions as required to implement quality control requirements.3. Review Test and Assembly Documentation. Review new and revised Blue Prints.4. Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability. 5. Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions. 6. Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision. 7. Perform miscellaneous special assignment assigned by group leader or supervisor. 8. Write and review both internal and external Corrective Actions. 9. Follow-up on Corrective Action implementation. 10. Participate in and lead audits and improvement workshops. 11. Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.12. Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.13. Maintain a high level of customer satisfaction (internal and external customers).14. Work with other departments and/or disciplines.15. Execute company policies and procedures; develop new procedures as required.16. Promote and encourage a continuous improvement culture.

Additional Functions:1. Work with other departments and/or disciplines.2. Execute company policies and procedures; develops new procedures as required.3. Support the operating priorities as identified by the Quality leadership team.4. Perform other duties as assigned.

Other Requirements:1. An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.2. An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.3. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.4. Ability to define problems, collect data, establish facts, and draw valid conclusions.5. Working knowledge of Statistical tools used for problem resolution.6. Lean/Six Sigma experience or greenbelt preferred.7. Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).8. Excellent communication and interpersonal skills required.9. Proficient computer skills.
 
Job Location: Tulsa, Ok
Rate: 55/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer II

Description:
Position Purpose:
• A Quality Assurance Engineer II develops and maintains optimum methods of controlling quality and/or reliability of product or service in assigned areas such as: statistical methods, tooling and gaging, inspection methods, and program planning.
• Responsible for providing technical support in the conduct of investigations on known Quality issues. Implements plans and instructions in support of departmental policies.
• The QAE will work to determine Root cause and corrective action for known Quality issues using the 8D methodology and validated by the audit group.
• Ensures compliance with all applicable regulations and develops and promotes a good working relationship with local regulatory authorities.
• Ensures a safe, conforming and quality product is delivered to our customers.

Principal Duties and Responsibilities:
• Develop quality control methods required for the product or service of the area.
• Prepare department procedures and instructions as required to implement quality control requirements.
• Review Test and Assembly Documentation. Review new and revised Blue Prints.
• Recommend revision or modification of systems necessary to maintain or improve quality and/or reliability.
• Evaluate new quality control methods and techniques for application to current production and future planning and recommend actions.
• Analyze inspection methods, techniques, equipment, forms, systems, records, reports, and procedures as they affect control of product quality and reliability, and approve or recommend revision.
• Perform miscellaneous special assignment assigned by group leader or supervisor.
• Write and review both internal and external Corrective Actions.
• Follow-up on Corrective Action implementation.
• Participate in and lead audits and improvement workshops.
• Assure that the investigations on Quality issues are conducted according to department procedures and work instructions.
• Actively identify and complete process improvement projects related to achieving improved quality or efficiency of Quality processes.
• Maintain a high level of customer satisfaction (internal and external customers).
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develop new procedures as required.
• Promote and encourage a continuous improvement culture.
• Work with other departments and/or disciplines.
• Execute company policies and procedures; develops new procedures as required.
• Support the operating priorities as identified by the Quality leadership team.

Education and Experience Requirements:
Bachelors degree in Engineering, aviation sciences, quality systems or related technical field; or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years quality assurance/control, manufacturing operations and/or military operations experience is required. Aerospace industry experience preferred.

Other Requirements
• An Airframe & Powerplant (A&P) may be used with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
• An ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
• Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
• Ability to define problems, collect data, establish facts, and draw valid conclusions.
• Working knowledge of Statistical tools used for problem resolution
• Lean/Six Sigma experience or greenbelt preferred.
• Knowledge of manufacturing processes (i.e. Assembly, Machining, Special Process, Inspection, etc.).
• Excellent communication and interpersonal skills required.
• Proficient computer skills.
 
Job Number: 24-370
Job Location: Tulsa, OK
Rate: $55/hr
Per Diem: YES
Overtime: YES
Duration: 1+year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Inspector

Description:
Quality Inspector

Fairfield, CA
$46.44/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
•Perform detailed product inspections on incoming materials from suppliers, including but not limited to First Article Inspections and certified supplier document reviews.
•Document characteristics of aerospace products accurately and with technical detail.
•Initiate Quality Notifications for any products that do not conform to written work instructions.
•Perform accurate and detailed dimensional inspections without supervision.
•Establish professionalism and timeliness in the performance of daily activities.
•Apply quality assurance procedures and requirements to the inspection of aerospace hardware and document review.
•Identify any potential quality issues early and prevent their occurrence.
•Communicate effectively to other aerospace personnel any quality issues needing resolutions.
•Indicate status of aerospace products within the MRP system.
•Work multiple assignments concurrently and maintaining flexibility to production schedule.

Additional:
•Basic math skills including addition, subtraction, multiplication, division, fractions and percentages
•Experience performing detailed product inspections using blueprints/specifications and precision measuring and test equipment
•The ability to work safely within an energetic materials manufacturing facility
•Excellent communication skills to drive effective problem resolution and communicate quality status and concerns to other Aerospace personnel
•The ability to utilize computer systems including input of data and retrieval of information for inspections and configuration purposes
•The ability to promote team spirit within the company and to provide a leadership role in the area of cooperation with all internal and external customers
•The ability to concentrate on assigned tasks despite interruptions
•The ability to review documents and to identify and resolve any errors or missing information
•The ability to work without supervision
 
Job Number: 11291
Job Location: Fairfield, CA
Rate: 46.44
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Electrical Engineer (DOD Secret Clearance)

Description:
Summary:
• This position will support electromagnetics and radio frequency (RF) testing.
• Working knowledge of RF testing of structures, antennas, radomes, and other aerospace related components is a must.
• The qualified applicant shall be able to perform data analysis and present findings to program engineering teams, be able to author or review RF test plans, and provide input to test fixture design, manufacturing, and set-up.
• Daily communication with management staff, program/Integrated Product Team (IPT) members, and customers is expected.

Required Qualifications:
• Active Secret DoD Clearance within 5 ½ years of last investigation
• B.S. in Electrical Engineering (ABET), specializing in RF / Electromagnetics; M.S. is desirable o Minimum 5 years with B.S. or related experience, 3 years with M.S.
• Relevant experience in aerospace industry, with experience in testing and analysis of structures, conformal antennas/apertures, arrays, and Radomes
• Solid background in Electromagnetics
• Working experience with test and evaluation of microwave devices
• Verification of antenna, radome, and structure performance through prototype fabrication, integration into test fixture(s), and testing
• Experience with commercial data analysis software, such as Knowbell and/or Pioneer
• Familiarity with Computational Electromagnetic (CEM) tools
• Willingness to work cooperatively in a team
• Proficient in MS Office suite
• Experience fostering and leading in a culture of continuous improvement
• Excellent verbal and written communication skills

Preferred Qualifications:
• Working experience within various anechoic test chambers
• Ability to create software algorithms for design, optimization, and data analysis using tools such as MATLAB or FORTRAN
• Proficiency with Computational Electromagnetic (CEM) codes such as HFSS, FEKO, PMM, XPATCH, RAM2D, etc.
• Familiar with common material measurements for the extraction of electrical properties
• Knowledge of composite manufacturing processes
• Ability to work across multiple projects and follow through to completion

Competencies for Success:
• Ability to multitask and prioritize
• Strong attention to detail
• Initiative, self-starter, adaptable, and high motivation for excellence
• High energy, results oriented, self-motivated / self-reliant, team player
• Strong interpersonal skills with ability to interface with an organization at all levels
• Ability to work in a dynamic, fast paced environment
 
Job Number: 1910103102
Job Location: Magna, UT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS (Reliability, Maintainability, Safety) Engineer

Description:
RMS (Reliability, Maintainability, Safety) Engineer

Location: Shelton, CT (06484)

Description:

o Interface with Logistics Support Analysts, NAVAIR Supportability and CH-53K Design IPTs & GSE Design Engineering to review LORA defined Intermediate and Depot Maintenance tasks to understand support equipment requirements; acceptance inspection, operational checkout, disassembly, cleaning, inspection, repair/replacement, assembly, and test.

o Refer to the Sikorsky Aircraft Maintainability System SAMS Data Base to review Organizational, Intermediate, & Depot Maintenance Task Analysis for the various systems on components on the CH-53K.

o Review Supplier SDRLs upon receipt to understand supplier recommendations for Intermediate & Depot maintenance support equipment requirements.

o Review existing production tooling for Client manufactured components for application for Intermediate and Depot Level Maintenance tasks.

o Working with NAVAIR Lakehurst & NAVAIR Supportability, determine if existing peculiar and common support equipment in NAVAIR/DOD Inventory can support CH-53K Organizational, Intermediate, & Depot Maintenance Tasks.

o Prepare tracking files that identify support equipment that is required for each maintenance task for a system or component. The tracking files will track all peculiar & common support equipment identified.

o Using the SAMs Data Base, prepare Peculiar Support Equipment CDRLs (SERDS Support Equipment Requirements Data) for Peculiar Support Equipment (PSE) required to support Organizational, Intermediate, & Depot Maintenance Requirements.

o Create and manage lists to ensure proposal responses are accurate to approved maintenance plans.

o PREFERRED EXPERIENCE:
-A Federal Aviation Administration (FAA) Airframe/Powerplant certification is desired.
-Demonstrated knowledge on various types of aviation related ground support equipment is desired.
-Naval Aviation Maintenance Program (NAMP) experience in a Depot/Overhaul Repair facility.
-Strong Microsoft Excel and Word experience.

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57843
Job Location: Shelton, CT
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Receiving Inspector

Description:
We are looking for a great Inspector for an Aerospace Company in Los Angeles County.

• Perform First Article Inspections
• High school diploma or GED required
• Knowledge of AS9100 and other relevant aerospace industry standards.
• 2+ years of experience in a manufacturing environment, preferably aerospace, or equivalent education and experience. Previous inspection experience a definite plus.
• Ability to work with Microsoft tools, CATIA, 2D and 3D drawings or computer generated models or other similar types of engineering data.
• Basic math and technical writing skills.
Proven hands-on inspection experience in the aerospace industry using a variety of precision measurement tools.
• GD&T comprehension through experience and/or formal training.
• In depth understanding of the inspection techniques and quality issues associated with composites.
• Attention to detail and follow through.
• Ability to communicate effectively with all levels of company personnel.
• Specific vision abilities (corrected or uncorrected) required for this job include color perception, close vision, distance vision, peripheral vision, depth perception and ability to adjust focus.
• Must be able to lift 50 pounds (unassisted).

The Spaceship Company, LLC AA/EOE
 
Job Location: Los Angeles
Rate: $17-$20
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secondary Flight Control Systemd Compliance Engineer

Description:
We are seeking an experienced Compliance Engineer to fill a position for an aerospace company here in Nagoya, Japan. Interested candidates should have 10 plus years of Compliance experience as well as Secondary Flight Control Systems experience.

Responsibilities of the the Secondary Flight Control Systems Compliance Engineer

Evaluate the current aircraft design, with respect to compliance of the Secondary Flight Control System as required by airworthiness regulations.
Conduct verification and showing-compliance activities, such as Design Reviews, inspections and analysis.
Conduct tests, witness tests and creating test reports.
Work closely with the other team members to identify and escalate aircraft and program certification Issues to management.
Review certification documents, including CPs, compliance reports, and IP/CRI/CAI positions, as an independent checker to ensure quality of certification products, prior to regulatory review.
Support alignment of company proposals to globally accepted standards for certification and compliance.
Conduct coordination with related parties such as JCAB, FAA and EASA.
Manage the scheduling of all certification activities.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)​
10 plus years of experience as Compliance Engineer for Secondary Flight Controls Systems.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Design Engineer

Description:
Location: Driftwood, TX (20 miles southwest of Austin, TX)



Job Summary

Seeking an experienced, self-motivated Senior Electrical Design Engineer (Sr. EE) to provide both direct contribution and technical leadership to develop Automated Test Equipment (ATE) Systems.
The Sr. EE is responsible for all aspects of requirements analysis, design, integration, and deployment of complex automated electronic test systems.
Must have demonstrated expertise in one or more of the following areas: ATE system design, RF/microwave system design, analog circuit design, digital circuit design.
Must thrive in a fast-paced, customer-focused, cross-functional team.
Works closely with program manager to direct and oversee the technical work of other electrical, mechanical, and software engineers.
Strong written and verbal communication skills required. Must quickly and thoroughly learn new skills, technologies, and industry standards.
The Sr. EE must be a driven problem-solver who motivates others by word and example to achieve the team’s goals.
Job Responsibilities

Specify, design, and implement automated electronic test solutions for customer products.
Specify, design, and implement complex electronic hardware modules and sub-systems.
Design measurement algorithms.
Serve as technical leader of cross-functional team.
Prepare and lead all technical aspects of formal and informal design reviews.
Identify and resolve technical problems that often occur during development of new systems.
Define and adhere to program schedules and budgets.
Integrate hardware and software to fully support ATE systems.
Insure all customer technical requirements are fully met.
Qualifications

BSEE or MSEE
10+ years experience performing responsibilities described above
Must be a U.S. Citizen due to ITAR and specific contract flowdow
Preferred skills:

Strong understanding of RF systems, measurement, and design:
S-parameter measurements, power accuracy, and digital modulation standards
Knowledgeable about gain, compression, and intermodulation measurements
Appropriate selection of RF and microwave instrumentation
Experience with using RF/Microwave Test Instrumentation: VNA, Power Meter, Spectrum Analyzer, RF Switching
Strong understanding of mixed signal test and measurement:
Experience with test instruments such as Oscilloscope, DMM, Function Generator, Programmable Power Supplies
Experience with signal switching such as multiplexers and matrices
Experience with industry standard products such as PXIe, LXI, VXI, GPIB.
Experience with communication buses: Ethernet, 1553, ARINC429, SPI, I2C
Strong understanding of digital test and measurement:
FPGA and embedded design
JTAG/boundary scan
Experience with test instruments such as logic analyzer, pattern generator, and oscilloscope.
Ability to diagnose and correct ATE system defects.
Experience with software development using LabVIEW, TestStand, C/C++, Python.
Design and layout of printed circuit boards


Please send resumes to Becky Norman at bnorman@butler.com.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression
 
Job Number: 57828
Job Location: Austin, TX
Per Diem: possible
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Engineer (5-7+ yrs exp)

Description:
Job Responsibilities:
• Design and development electronic circuit boards and systems
• Generate and review specifications
• Develop and release complete packages for manufacturing, including schematics, bills of materials, PCB fab documentation, etc.
• Test, debug, verify and integrate electronics assemblies and sub-systems
• Assist manufacturing with the resolution of production problems, as needed

Education:
• BS degree in Electrical Engineering or related discipline
• MS Electrical Engineering preferred

Experience/Qualifications:
• 5+ years’ experience required
• Candidate must be a US Citizen with the ability to obtain a US Government Security Clearance

Required Skills
• Experience with Mentor PCB development tools, including Xpedition, PADS, HyperLynx
• Excellent understanding of product development methodology and associated documentation

Preferred Skills
• Experience working in an AS9100 environment
• Background developing military/aerospace products and related environmental specifications and requirements, including EMC, temperature, altitude, power, etc.
• Knowledge of requirements and components needed to develop interconnecting cables is a plus
• Knowledge of Microsoft Office Suite
• Strong verbal and written technical communications skills
• Must be a self-starter
• 10% or less travel may be required
 
Job Number: 1910107094
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: Split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered. The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.
Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.
Basic Qualifications
* Proficient with C programming language, and embedded systems in a lab environment.
* Experience with Microprocessors, Microcontrollers, and/or DSPs
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change
Preferred Qualifications
* 6+ years experience in software development
* Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Model Based Development, using SysML, Simulink or SCADE
* Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
* Knowledge and use of ADA, Assembly, Perl, C#
* Software Verification including, test procedure development, robustness testing and debug
* Experience with software configuration management and problem reporting tools


Additional Job Details:
* Labview Test Stand experience * Programming in Labview * Working in Lab to Test Hardware * Low level peripheral driver development for the TMS570 and LS1021A * Develop an application for the LS1021A * Develop a mechanism for linking generic signal processing functions to I/O data via configuration tables


Travel Requirements Travel to Rockford and/or Jamestown will be required
 
Job Number: 51383
Job Location: Phoenix, Az
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Location: Jamestown ND
Rate: $68.00/hr
Duration: 6 months
Work Shift: First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Primary Responsibilities
o Develops, coordinates and conducts complex tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Liaises closely with other project team members in the planning, design, development, and utilization of electronic data processing systems for product and commercials software to ensure smooth operations on software engineering activities.
o Recommends changes in the selection and application of software production components to improve and develop software engineering activities.
o Designs and implements build procedures that are used to support hardware and software product development and function.
o Designs, develops, documents, tests and debugs control and diagnostic systems that contain logical and mathematical solutions.
o Conducts multidisciplinary research and collaborates with equipment designers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software.
o Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition.
o Ensures hardware and software standards are met.
o Designs and implements build procedures that are used to support hardware and software product development and use.
o May develop software configuration standards for company-wide use.
o May train software developers in the use of configuration management tools and the implementation of software quality standards

Basic Qualifications
o Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline and 7 years of prior relevant experience or an Advanced degree and 5 years of prior or relevant experience
o Embedded systems software development experience utilizing C or C++ (4+ years)
o Motivated self-starter with strong analytical skills
o Experience with real-time embedded applications
o Experience in developing products for civil or military applications meeting industry or government security or safety standards
o Strong written and verbal communications skills and the ability to work well with others in a professional team environment
o Strong organizational skills and the ability to manage multiple tasks while balancing priorities and schedules Preferred Qualifications
o TCP/IP network applications development experience (4+ years)
o UML experience (2+ years)
o Familiarity with ARINC 664 protocol (2+years)
o Experience following a well-defined software development process, e.g. DO-178 (4+ years) Education & Certifications
o Bachelor’s Degree in engineering or Technical discipline and 7 years of relevant experience OR
o Advanced Degree in engineering or Technical discipline and 5 years of relevant experience OR
o In the absence of a degree, 11 years of relevant experience is required

Candidate meeting requirements of an advance position would be considered depending on aerospace experience.
 
Job Number: 11304
Job Location: Jamestown, ND
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Stress Analysis Engineer

Description:
Roles and Responsibilities

Ability to conduct stress analysis by hand and FEA. Experience with ANSYS Mechanical for FEA. Experience with a variety of analysis types, including: proof/burst, shock/acceleration, modal, harmonic, random vibration.

Qualifications and Education Requirements

Must Have BS degree
Overall 10-15 years of experience doing stress analysis in Aerospace. Familiarity with analysis of pneumatic engine components a plus. Strong verbal and written communication skills required
 
Job Number: KM - 166453
Job Location: Irvine, CA
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Kristine
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stability and Control Engineer

Description:
Summary
As the Senior Stability & Control Engineer you will report to the VP of Flight Sciences and be responsible for providing detailed stability and control analysis and input to the design of the business jet.

On any given day you might:
Independently address stability and control related issues throughout the vehicle design and test process
Develop aerodynamic databases needed for Stability and Control
Identify Stability and Control issues and propose solutions
Support flight control laws group and the development of aircraft flight control laws
Develop requirements for low and high-speed wind tunnel tests
Support S&C wind tunnel tests from planning through execution and final reports
Provide hinge moment data based on CFD and wind tunnel tests
Provide input for control surface sizing, deflection angles, and rates
Contribute to the development of aircraft stability and control requirements that are compatible with civil certification standards (FAR25/CS25)
Provide inputs to developmental and FAA-approved flight manuals including normal handling characteristics and emergency procedures
Support stability and control flight testing

We're looking for someone who has:
A BS in Aeronautics or Aerospace Engineering with more than 6 years of experience (or MS in engineering plus 4 years of experience)
Experience with the latest industry-standard stability and control and aerodynamic design and analysis tools such as MATLAB/SIMULINK and vortex-lattice tools
Experience working with CFD experts to generate data required for stability and control analyses
Prior experience performing trade studies related to stability and control including using numerical tools as well as wind tunnel data
Experience in the creation of aerodynamic stability and control databases
Knowledge of, and experience with, FAA FAR 25 and EASA CS 25 stability and control regulatory requirements and means of compliance
Experience with flight and wind tunnel test monitoring and data reduction to support stability and control analysis and certification efforts
Familiarity in generating documentation to support certification efforts
 
Job Number: 42-036
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Navigation and Controls Engineer (7 - 10+ yrs exp)

Description:
The Core Technology Engineering Group is looking for a Staff Engineer with a background/interest in Navigation and Controls to help in the design, analysis and testing of state of the art airborne remote sensing systems.

These sensor systems utilize highly accurate Navigation & Control systems in order to isolate the line-of-sight (LOS) from aircraft motions, plus for pointing to imaging targets as well as obtaining geolocation information. The individual will join an experienced interdisciplinary team of engineers working in a collaborative environment, with the responsibility of developing & implementing guidance and control systems.

The main responsibilities include:
• Derive the Navigation & Control system requirements and functionally architect a system to meet the requirement under size & power constraints.
• Design and/or implement Navigation & Control algorithms to perform under 6DOF aircraft motion.
• Perform model-based analysis of the various aspects of the system including stability, performance, robustness and mission objective analysis.

Education/Certifications:
• Master's degree in Aerospace, Controls, Electrical or Mechanical Engineering, Physics, or Mathematics with 5+ years Control or Navigation Systems experience
• PhD in Control or Navigation Engineering with 3+ years Control or Navigation Systems experience is highly preferred

Experience/Qualifications:
Basic Requirements:
• US Citizenship
• Minimum of a Bachelor's degree in appropriate disciple and 7 years’ experience or an advanced degree in the appropriate disciple and 5 years’ experience

Required Experience & Qualification
• Navigation solution design and implementation for ISR sensing systems
• Airborne GPS/Antenna Electronics integration
• Inertial instrument expertise

Preferred Experience & Qualification
• Modernized GPS products experience
• Modeling and estimation/Kalman filtering experience
• Sensor fusion and PNT experience
 
Job Number: 1910107091
Job Location: Westford, MA
Rate: Very Competitive
Per Diem: Split
Overtime: Yes
Duration: 2 years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
Staff Software Engineer

Location: Phoenix AZ
Rate: $68.00/hr.
Shift: 1st
Duration: 6 Months
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
* Proficient with C programming language, and embedded systems in a lab environment.
* Experience with Microprocessors, Micro-controllers, and/or DSPs
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
* 6+ years experience in software development
* Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Model Based Development, using SysML, Simulink or SCADE
* Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
* Knowledge and use of ADA, Assembly, Perl, C#
* Software Verification including, test procedure development, robustness testing and debug
* Experience with software configuration management and problem reporting tools

Additional Job Details:
* Labview Test Stand experience
* Programming in Labview
* Working in Lab to Test Hardware
* Low level peripheral driver development for the TMS570 and LS1021A
* Develop an application for the LS1021A
* Develop a mechanism for linking generic signal processing functions to I/O data via configuration tables
* Travel will be required to Rockford and/or Jamestown
 
Job Number: 11636
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analyst Principal Engineer - no clearance CA

Description:
166453/9359
Stress Analyst Principal Engineer
Irvine, CA
60-80/hr DOE


Ability to conduct stress analysis by hand and FEA. Experience with ANSYS Mechanical for FEA. Experience with a variety of analysis types, including: proof/burst, shock/acceleration, modal, harmonic, random vibration.

Overall 10-15 years of experience doing stress analysis in Aerospace. Familiarity with analysis of pneumatic engine components a plus. Strong verbal and written communication skills required.

Provides technical expertise and leadership in an engineering discipline, product, or systems field. Researches and carries out complex engineering assignments that result in the introduction of new technologies, products, or processes. Contributes to and has responsibility for the completion of significant assignments with broad product, technology, customer, and strategic business impact. Develops and recommends solutions to unique technical challenges.

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in engineering or a science technical discipline; Masters degree (MS) preferred.

· Demonstrated ability to perform the essential functions of the job typically acquired through 10-12 years of related experience.
· Comprehensive, advanced knowledge of product or domain engineering theories (e.g. mechanical, electronic, packaging, etc.), principles, industry practices, concepts, techniques, government regulations, and policies.
· Demonstrated ability to research, develop, and integrate new technologies.
· Ability to communicate and influence varied audiences to gain support or resolve issues. Makes effective presentations on complex topics to top management, customers, and/or other key stakeholders.
· Ability to apply and integrate knowledge of other related engineering areas or experts to own area of expertise.
· Proficient with software and specialized data analysis, and engineering design tools.
· Ability to establish and track performance to goals and objectives to complete complex or major projects and provide direction to the team at project milestones.
· Ability to respond to significant inquiries from customers, regulatory agencies, or other internal teams.
 
Job Number: JK-9359
Job Location: Irvine, CA
Rate: 60-80/hr DOE
Per Diem: pd split possible
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer / Stress Analyst with Nastran & Abacus

Description:
*This is a 15 month contract position located in Palmdale, CA*

*No relocation is available, must have an active clearance to apply*

*On site position, per diem SPLIT is available for those out of town*


We are seeking a contract flight vehicle (fixed or rotary wing) stress / structural analyst who will be working on aircraft and or missiles applying knowledge to dynamics and stress of flight upon vehicles.


Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:

*Current Active Secret Clearance; Requires applicants to be US Citizens
*8+ years’ experience in stress/structural analysis of aircraft using FEM (Nastran or Abacus).

*Knowledge of SLIM or VISION.
*Good FEA and FEMAP skills.
*4 year engineering degree in ME, aerospace or equivalent
 
Job Number: 472
Job Location: Palmdale, CA
Rate: $85
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Structural Analysis Engineer

Troy, OH
$65/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead. Prepare static and fatigue analyses in support of drawing releases, development of qualification test requirements, and documentation of stress analyses for Customer review and MRB support. All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Job Details:
Bachelor's degree or equivalent in mechanical/aerospace/structural engineering or related discipline with a minimum of 10 years of directly related stress analysis experience is required.
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods is required
• Clear understanding of external loads, load paths and development of component and system free body diagrams is required.
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows is required.
• Strong written and verbal communication skills is required.
• Prior experience with ABAQUS or ANSYS FEA is required.
• Strong understanding of aerospace materials is desired.
• Working knowledge of CATIA V5 is desired.
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter) is desired.
• Good understanding of manufacturing processes is desired.
• Strong interpersonal skills is desired.
 
Job Number: 10993
Job Location: Troy, OH
Rate: 65.00
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer ( Clearfield, Utah ) S9271202

Description:
Structural Analysis Engineer ( Clearfield, Utah ) S9271202
12 Month Contract

Pay Rate: $70-80 /hr W2, maybe more for the right candidate

**MUST HAVE AN ACTIVE SECRET CLEARANCE

Currently seeking a Principal Composite Structure Analysis Engineer to join our team in our Clearfield, UT offices.
Candidate must have had their last investigation within the last 4 1/2 years. Role description & Responsibilities: Highly motivated analysis engineer with composite structures experience for military and/or commercial aircraft. Responsibilities include but are not limited to static and dynamic analysis of composite structures, bonded and bolted assemblies The candidate also have experience with composite material mechanical characterization and dynamic testing (modal, forced vibe acoustic etc.) of coupon and subelements. Ability to define and lead characterization and test activities, including: authoring test plans and test reports, data reduction and calculation of material allowables.

Experience Requirements:
**MUST HAVE AN ACTIVE SECURITY CLEARANCE TO BE CONSIDERED FOR THIS ROLE (Candidate must have had their last investigation within the last 4 1/2 years.)

** BS in Civil, Mechanical, or Aerospace Engineering or related with a minimum of 8 years related experience in analysis engineering function.
Minimum of 8 years of experience with Nastran or ABAQUS Static, dynamic and thermostructural analysis experience Test lab experience, including instrumentation and data reduction Knowledge of composite materials and manufacturing processes Excellent oral and written communication skills Ability to work in a fast paced dynamic environment as part of a multi-discipline team

Experience Preferred:
Previous experience in aerospace manufacturing facility Proficiency with NX, Catia V5, Fibersim, Altair Hyperworks/Optistruct, and Hypersizer are also desirable • Definition of layups and ply patterns with Fibersim to generate finite element models, Requirements definition and verification Constitutive Model Development and implementation

Skills & Qualifications: Strong interpersonal skills with the ability to work with a team Excellent communication skills. Ability to make sound decisions Ability to multi-task Ability to prioritize and manage time effectively Education/Certifications: BS degree in Civil, Mechanical, Aerospace Engineering, or related
 
Job Number: S9271202
Job Location: Clearfield, UT
Rate: Open
Per Diem: no
Overtime: yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis/DADT Engineer

Description:
NOTE: Customer prefers candidates with active clearance, however clearable candidates will be accepted.


Support IFG Stress/FEA team using computational methods and tools in a specialized field (strength of metallic and composite airframe structures, metallic sub-systems structures, finite element analysis, etc.).
Performs pre-dimensioning computations by implementing analytical or digital computation methods and pass judgement on the credibility of the data received and the results obtained.
Take part in drawing up the measurement plan applicable to the tests, and analyses the results.
Required experience with structural mechanics simulation software and ANSYS.
Familiarity and experience with other FEA tools such as NASTRAN, other pre/post processor software, as well as knowledge of MIL-HDBK-5 is also required.
Must have working knowledge/experience with Computer Aided Design software tool CATIA.
Must be capable of interpreting detail, assembly, and installation type drawings.
Knowledge of FEA Tools such as NASTRAN, MIL-HDBK-5 is required.

BS, Engineering in related field

_____________________________________________________________________________________________________________________________________________________

Please send resumes to Becky Norman at bnorman@butler.com. Thanks.





Rate range $70-$76/hour

____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57971
Job Location: Fort Worth, TX
Per Diem: possible
Overtime: possible
Duration: 6+ months
Start Date: Oct/Nov
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
POSITION SUMMARY:
The structures engineer performs design, documentation, and installation tasks on Transport Category Aircraft for Interior Completion STC projects. The engineer will be responsible for creating design data in support of structural modifications to aircraft primary structure for the installation of interior and external components. The engineer interfaces with internal and external partners and suppliers, procurement, and manufacturing in performing these functions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Designs mechanics aircraft primary or secondary structures for VIP business aircraft.
2. Designs structural modifications and structural provisions.
3. Designs repairs for aircraft structure that are beyond the scope of repair documentation
4. Supports the integration of structural and systems installation components within the aircraft configuration.
5. Create moderate to complex design of aircraft primary or secondary structures to meet customer criteria, quality standards, FAA requirements, budget and project schedules using Computer Aided Drafting/Design tools.
6. Ensures designs meet customer criteria, quality standards and FAA requirements.
7. Review of service bulletins and airworthiness directives for applicability, and the generation of engineering documentation for the accomplishment of structural inspections and modifications.
8. Adheres to budget and project schedules.
9. Produces accurate designs and uses consultants when necessary.
10. May perform as functional “lead” for group on specific projects.
11. Assists in selection of components and materials to maintain aircraft configuration.
12. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace or Mechanical Engineering or the equivalent.
2. 2 – 4 years of experience working in aircraft completions industry on transport category aircraft.

REQUIRED SKILLS AND ABILITIES:
1. Computer Aided Drafting/Design. SolidWorks or AutoCAD is preferred.
2. Must have top down modeling experience
3. Aviation background and aircraft interior experience preferred.
4. Must have analysis experience (tolerance or preliminary).
5. Knowledge of mechanical design and documentation standards.
6. Budget and project management experience required.
7. Ability to work independently and cross-functionally.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.



The Structures Company is an AA/EOE.
 
Job Number: 342
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Designers - No Degree Catia V5

Description:
Leads the development and maintenance of mechanical/structural engineering product definition. Oversees the development and design of layouts and the modification of existing designs to satisfy customer and production requirements.

Catia V5/Aerospace/Aircraft Background

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-OK-Tech Design
Job Location: Oklahoma City, OK
Rate: 57.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer (Landing Gear)

Description:
The ideal candidate will:
• conduct structural analyses of Landing Gear and Systems components working within an integrated product development team reporting to the stress lead.
• prepare static and fatigue analyses in support of drawing releases,
• develop qualification test requirements, and
• Document stress analyses for Customer review and MRB support.

All analyses are to be prepared in compliance with the project stress philosophy documentation and applicable Corporate Engineering Manual requirements and methodologies. The Contractor must adhere to Customer’s Proprietary Information Agreement and must be compliant with ITAR and other regulatory requirements.

Requirements:
• Bachelor's degree or equivalent in Mechanical / Aerospace / Structural Engineering or related discipline
• Minimum of 10 years of directly related stress analysis experience
• Strong background of strength, stability and fatigue analyses of metallic primary structural components using both computer modeling and classical hand analysis methods
• Clear understanding of external loads, load paths and development of component and system free body diagrams
• Proficient at using computing tools and programs including MS Office (Word, Excel) and Windows
• Strong written and verbal communication skills
• Prior experience with ABAQUS or ANSYS FEA

Desired Competencies:
• Strong understanding of Aerospace Materials
• Working knowledge of CATIA V5
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter)
• Good understanding of Manufacturing Processes
• Strong interpersonal skills
 
Job Number: 1910102322
Job Location: Independence, OH
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Engineer 3 (DOD Secret Clearance)

Description:
The ideal candidate will:
• Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
• Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
• The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization.
• Tools utilized may include FEMAP, NX, and other software applications.
• Active Security Clearance

Basic Qualifications:
• Bachelor of Science degree (ME/AE/CE) plus 5 years of experience in AEROSPACE Structural Analysis.

Preferred Qualifications:
• Knowledge of FEMAP and NX CAE.
• Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years.
 
Job Number: 1910102654
Job Location: Melbourne, FLA
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Subcontracts Administrator - Aerospace/Defense

Description:
Summary:
An Administrator will be responsible for the procurement of subcontracts including the management of cost, schedule and performance parameters.
1. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts.
2. Reviews proposals, negotiates prices, selects or recommends suppliers, analyzes trends, follows up on orders placed, verifies delivery, approves payment and maintains necessary records.
3. Participate in the development of subcontract specifications, Statements of Work for the procurement of specialized sub-assemblies, equipment, and/or services necessary to support manufacturing in the production of our products and the operation of our organization.
4. Lead a Decision Matrix Analysis team to make best value decisions for source selection
5. Compiles information to keep informed on price trends and manufacturing processes.
6. Manage suppliers for risk including but not limited to price, quality, delivery and relationship.
7. Create and maintain a CPSR Compliant folder meeting all the requirements of FARs and DFARS including price and cost analysis.
8. Negotiates and coordinates additions, deletions or modifications to subcontracts.
9. Select methods, techniques and evaluation criteria for achieving goals and objectives.
10. Communicates regularly with suppliers, program teams and senior leadership regarding supplier performance and risk.

Minimum Qualifications:
• BA/BS with 5+ years' Professional experience with contracts in the Defense/Aerospace Industry.
• Ability to obtain Secret US Government Security Clearance.
• Advanced Experience with Microsoft Office Applications (Excel, PowerPoint)
• Working knowledge of the Federal Acquisition Regulations (FAR) and Defense Acquisition Regulations (DFAR).
• Previous Contract Management experience
• Demonstrated Communication Skills both verbal and written
• Ability to work independently and as part of a team to meet departmental deadlines and goals

Preferred Additional Skills:
• Government Procurement Experience.
• Supplier Management/Project management
• Experience with MRP Tools.
• Experience with Long Term Agreements and/or Blanket Purchase Agreements.
• Experience in Negotiations, Terms & Conditions.

Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-39421
Job Location: Clifton, NJ
Rate: Hourly
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Robert Mihalyi
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer

Description:
US Citizen, US Person, and Foreign National candidates permitted



Job Responsibilities:

Manages systems integration, technical design, model based design, systems analysis for supportability and effectiveness of technological systems, system safety analysis, research, systems verification or validation planning, architecture development, and requirements for commercial, industrial and governmental purposes.
Integrates system activities to support the aforementioned tasks.
Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.
Responsible for requirements management and supplier design oversight.
Will be responsible for managing design responsible suppliers to ensure compliance to aerostructures technical requirements while keeping project within allocated cost and schedule.
Requires individual with strong technical skills with experience managing projects with little oversight.


BS in Engineering related field required

**Travel to supplier sites may be required

This position pays in the $40/hour range

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57782
Job Location: Chula Vista, CA
Per Diem: possible
Overtime: possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
The ideal candidate will:
• Manage overall projects to assist in the technical planning, system integration, verification and validation, evaluating alternatives including cost and risk, supportability and analyses for total systems.
• Perform analyses at all levels of total system product including; concept, design, fabrication, test, installation, operation, maintenance and disposal.
• Conducts engineering processes using standard work, including verification and qualification procedures.
• Synthesize analyses of data and use the results to prepare technical reports of findings and recommendations.
• Seek to identify possible problems presented in applicable projects that may cause a delay or exceed budget. Contribute to finding appropriate solutions.
• Perform technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
• Consider and evaluates alternatives accounting for similar metrics.
• Ensure the logical and systematic conversion of product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
• Decompose customer specifications and system level requirements into sub-system and piece part requirements and generate verification criteria and plans for the requirements.
• Perform architectural exploration.
• Manage configuration process, performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Requirements
• MS Office Suite
• Able to present findings and collaborate with other team members or functional leaders
• Experience with any one of the following: RTCA DO-178, DO-254, DO-330 and DO-331
• Aerospace Industry experience
• Travel up to 10% domestically and internationally

Preferred Qualifications
• Requirements Management software e.g. DOORS or equivalent
• MATLAB and Simulink or equivalent systems modeling software

Education & Certifications
• Bachelor’s degree and 7 years of relevant experience OR
• Advanced degree and 5 years of relevant experience OR
• In absence of a degree, 11 years of relevant experience is required
 
Job Number: 1910105164
Job Location: Jamestown, ND
Overtime: possible
Duration: 6-month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Jamestown ND
Rate: $62.00/hr
Duration: 6 months
Work Shift: 1st Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

o Manages overall projects to assist in the technical planning, system integration, verification and validation, evaluating alternatives including cost and risk, supportability and analyses for total systems.
o Performs analyses at all levels of total system product including; concept, design, fabrication, test, installation, operation, maintenance and disposal.
o Conducts engineering processes using standard work, including verification and qualification procedures.
o Synthesize analyses of data and uses the results to prepare technical reports of findings and recommendations.
o Seeks to identify possible problems presented in applicable projects that may cause a delay or exceed budget. Contributes to finding appropriate solutions.
o Performs analysis at all levels of the total system product including concept, design, fabrication, modeling, test, installation, operation, maintenance and disposal.
o Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
o Considers and evaluates alternatives accounting for similar metrics.
o Ensures the logical and systematic conversion of product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
o Decomposes customer specifications and system level requirements into sub-system and piece part requirements and generates verification criteria and plans for the requirements.
o Performs architectural exploration.
o Manages configuration process, performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
o MS Office Suite
o Able to present findings and collaborate with other team members or functional leaders
o Experience with any one of the following: RTCA DO-178, DO-254, DO-330 and DO-331
o Aerospace Industry experience
o Travel up to 10% domestically and internationally

Preferred Qualifications
o Requirements Management software e.g. DOORS or equivalent
o MATLAB and Simulink or equivalent systems modeling software Education & Certifications
o Bachelor’s degree and 7 years of relevant experience OR
o Advanced degree and 5 years of relevant experience OR
o In absence of a degree, 11 years of relevant experience is required
 
Job Number: 11305
Job Location: Jamestown, ND
Rate: $62.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
- Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
- Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
- Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

- Our client is looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development.
- Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment.
- Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation.
- Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with modern software intensive mission systems architecture.
- Must be a US Citizen; this position will require a government security clearance.
- This position is located at a facility that requires special access.

Skills Needed:
- Read Engineering Drawings and Parts List
- Capture data digitally from parts lists and excel spreadsheets to form new lists
- Conduct meetings for changes to hardware allocations, tracking and reporting
- Project Planning, Architecture, Functional Allocations
- MS Excel, linking and pivot tables

Attributes:
- Good attitude about work and working with others
- Attention to detail
- Good communication skills
- Team player
- Initiative and ability to work
- Passion for detail and getting the job done in a timely fashion
- RF Testing experience
- Experience with harness design and fabrication
- Experience with hardware configuration management

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
- Will accept experience in lieu of degree
- Manager will consider both 2 and 3 level candidates.
- Must have Aviation/Aerospace experience
- Experience Writing/Testing/Integrating/Developing Software for Imbedded and C++ required
 
Job Number: 10789
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aerospace and Defense

Description:
Ingenium Technologies - Rockford, IL





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large aerospace company is currently seeking several Systems Engineers to support the electric power systems power conversion and distribution product group. The candidate will define, maintain, document, and test system requirements for the secondary power distribution products.



Responsibilities will include but not be limited to:

Working in a team environment, engaging in full life-cycle development of electric power distribution and conversion systems.

Certifying to aerospace standards such as ARP4754

Develop distribution system architecture that meets or exceeds the product development requirements

Confirm product design performance, capability and reliability in the engineering product test laboratories

Work with internal systems and software teams to analyze and conduct engineering investigations on electronic products

Interact with both internal and external teams to seamlessly integrate distribution product designs into chapter 24 aircraft electrical systems

Coordinate with manufacturing faculties to effectively implement design into production

Collaborate with the product marketing teams locally to develop product requirements and ensure that the product meets their needs when launched

Required Software: MS Office



Required Experience:

10-15 years experience in systems engineering in the aerospace and defense industry
10-15 years experience with aircraft certification requirements related to system safety and reliability (ARP4754, ARP4761 , FAR / JAR) , and aircraft electrical system architecture
Experience with DOORs software
Experience with RTCA, FAA, ARINC, MIL, and ISO specifications
Experience with Electrical sub-systems development (e.g. Chapter 24, aircraft utilities, power distribution units, actuation systems)
Experience with High Voltage Direct Current (HVDC) Systems a plus
Experience with creating estimates and proposals
Required Education:

Bachelor’s degree in Computer Science, Electrical Engineering, or similar discipline
Position: Long Term Contract



Location: Rockford, IL



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 247521
Job Location: Rockford, IL
Rate: open
Per Diem: yes
Overtime: yes
Duration: 1 yr
Start Date: asap
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aircraft Engine Installation

Description:
Experience:
• Must have system level engineering experience on engine installations. Turbo Prop install experience is preferable, but not mandatory.
• Must have a BS degree (BSAE, BSME)
• System testing required for PDR.
• Experience with layout and detail design of engine installation into aircraft for PDR.
• Spec out system parts.
• Coordinate/support manufacturing
• Select and manage suppliers
• Some experience with CAD software like Catia V5, UG NX, etc.
• Experience doing thermal analysis of engine installations.
• US Citizen highly preferred. Greencard could work, but much more difficult to place on program.
• Someone who has been a Project Engineer at UTAS/Collins Aerospace on an engine program would be perfect.







The Structures Company is an AA/EOE.
 
Job Number: 333
Job Location: Manassas, VA
Rate: $80/Hr. **DOE**
Per Diem: Yes
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166144 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2002-1
Max Pay Rate: $65.92/hr
Start Date: 9/13/2019
End Date: 12/12/2020
Position Type: Contract

Job Summary:
This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

Job Description:
Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
• Experience in DMSMS in the Aerospace Industry
• Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
• Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
• Experience working with Suppliers and/or Supply Chain engagement.
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Areas of Expertise Materials No 1
Areas of Expertise Supply Chain No 1
Technical Skills Data Management No 1

Qty 1 position needed
 
Job Number: JE-2001-1S5
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer ( Northridge, CA ) S9436479

Description:
Systems Safety Engineer ( Northridge, CA ) S9436479
6 Month Contract to Hire, high potential to convert

Pay rate: $70-100 /hr , flexible for the right candidate

Clearance: Active DoD Secret level clearance required

Interviewing ASAP

Qualifications:
- Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
• Minimum 7 years of related experience.
• High level understanding of tactical missile subsystems.
• Proficient with MS Office suite of products.
• Strong interpersonal skills and an ability to build effective working relationships are a must.
• Excellent attention to detail.
• Excellent oral and written communication skills and technical writing experience.
• Ability to communicate findings to varied audiences to gain support or resolve concerns.
• Self-starter capable of performing and prioritizing assigned tasks with very little direction.
• Familiarity with requirements development and risk management. //

Key responsibilities include:
• Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
• Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
• Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs
• Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
 
Job Number: S9436479
Job Location: Northridge, CA
Rate: Open
Per Diem: no
Overtime: yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems/Components Engineer Parts Decomissioning

Description:
*This is a full time, 15 month contract position located in Fort Worth*



We are looking for a Systems Engineer who will be working in decommissioning F-35 aircraft components, termed Diminishing Manufacturing Sources & Material Shortages (DMSMS).



Duties will include last-time purchases, lifetime buys, and Bill of Material (BOM) monitoring. Candidate will be responsible for inventory management, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs). Candidate will be expected to interface with top level management, engineering teams, purchasing, etc.



Required:
*8 years' experience working as an aerospace Systems, Electrical or Components engineer working on DMSMS
*Strong use of the Teamcenter PDM and/or Siemens PLM Software.
*Active Secret Clearance; US Citizens only please
*Knowledge of Mission Systems Integration and total life cycle issues (architecture, requirements, design, analysis, integration, verification, production and sustainment).
*Experience working with Suppliers, conducting Proposal Analysis and Risk and Opportunity Assessments.



Pluses:

*Engineering Degree
 
Job Number: 386
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Publications Engineer

Description:
Technical Publications Engineer
Location: Chula Vista, CA

Job Summary:  Perform technical writing of aircraft after-market technical documentation.

Qualifications:  Must be able to perform each essential function and have education, skills & experience listed below. 

Recommended Keywords in Resume for Searching :   Technical / Writer / Aircraft OR Aerospace / Arbortext OR Frame Maker

Essential Functions & Responsibilities: 

Create technical content for documents such as SRMs, CMMs, AMMs, EMMs, IPCs, IPLs, Service Bulletins. 
Employ technical writing & publication software to create technical content in Simplified Technical English.
Education:

Absolute MINIMUM of 4 year ABET Bachelor Degree in Aerospace or Mechanical or Civil or Structural Engineering.   
Required Technical Writing Experience:

0-to-10 years of Technical Writing experience in aerospace industry creating content for aerospace technical manuals.  
Highly Preferred but Not Mandatory Experience:

Analytical thinking and problem solving in developing maintenance manuals content.
Knowledge of aerospace Tech Publication standards such as S1000D, ispec & ATA as they relate to maintenance manuals.
Technical Illustrating and the use of sketching tools and or artistic ability to hand sketch is a plus.
Parts list and Parts catalog creation by interrogating engineering data such as assembly drawings & models.
Personal and Interpersonal Skills

Strong interpersonal skills with willingness to ask questions & dig for answers. High degree of collaboration is expected.
Demonstrated ability to multitask with strong task orientation and attention to critical details required.
Ability to work independently, be insightful, resourceful & innovative and willing to do whatever work is assigned.
Great verbal & written communication skills with strong command of English language and Simplified Technical English.
Ability to read & understand 2D drawings, 3D solid models, assemblies and maintenance procedures
Preferred But Not Mandatory Tech Pubs & Software Skills:

Arbortext, Adobe Framemaker & PageMaker, IsoDraw, CORENA, Mark-Up languages: SGML, XML, HTML
MS Word, MS Excel, MS PowerPoint
3DVIA & CATIA (general familiarity) + Familiarity with Team Center + ENOVIA (general familiarity)
Certificates, Licenses, Registrations: None required except diploma or certificate for MIN 2 years technical training.



Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57347
Job Location: Chula Vista, CA
Rate: $35
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer

Description:
We are seeking a Test Engineer with a Bachelor's degree in a related engineering field and at least 3 years of relevant experience. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and test the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow.

What to look forward to:

As a Test Engineer, you will be using your skills and expertise to design formal tests on our products such as engines, instruments, controls, robots, machines, and more. You'll be responsible for conceptualizing and delivering difficult and complex mechanical and electro-mechanical component and system design tests. Your technical responsibilities during planning, organizing and conducting projects involves the design and development of new testing processes.

Must-haves:
• Bachelor's degree in a related engineering discipline and at least 3 years of relevant experience
• Understanding of testing methodologies
• Experience with various testing equipment and standards
• Ability to read schematics, use service manuals, follow test procedures, and use logical troubleshooting techniques
• Ability to prepare complex test procedures
• The ability to obtain and maintain a Security Clearance
Preferred:
• Experience with on-aircraft testing
• Familiarity with ISR aircraft mission system testing
• Current, active security clearance
 
Job Location: CO
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Tool Design Engineer

Location: Chula Vista, CA (91910)

12+ month contract


Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling. This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.). The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes. Must have ability to prepare standard work packages for offload, and develop conceptual designs. In addition, be able to perform tool stress analysis.

BS degree or 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace preferred). Strong Mechanical/Manufacturing Aptitude. Good understanding of assembly, machining and composite manufacturing processes. Good understanding of tool fabrication processes including welding, machining, heat treat, etc. Good understanding of ANSI Dimensioning and Tolerancing. Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred. Experienced in Lean manufacturing principles and strong aptitude towards implementing continuous improvement. Experienced in Microsoft Office applications (Word, Outlook, Powerpoint, etc.) and good technical writing skills. Experience with with tooling stress analysis in FEM and classical methods.





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57941
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
Tool Design Engineer

Chula Vista, CA
$48.25/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling. This position will work directly with multiple engineering disciplines (Manufacturing, Product, Quality, Stress, etc.). The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes. Must have ability to prepare standard work packages for offload, and develop conceptual designs. In addition, be able to perform tool stress analysis.

Additional:
BS degree or 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace prefered). Strong Mechanical/Manufacturing Aptitude. Good understanding of assembly, machining and composite manufactuiring processes. Good understanding of tool fabrication processes including welding, machining, heat treat, etc. Good understanding of ANSI Dimensioning and Tolerancing. Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred. Experienced in Lean manufacturing principles and strong aptitude towards implementing continous improvement. Experienced in Microsoft Office applications (Word, Outlook, Powerpoint, etc.) and good technical writing skills. Experience with with tooling stress analysis in FEM and classical methods.
 
Job Number: 11596
Job Location: Chula Vista, CA
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Tool Design Engineer

Description:
• Perform all engineering activities related to the design and construction of new tools and modification of existing tools for aerospace composites manufacturing.
• Responsible for working with personnel throughout the company to help resolve any engineering related tooling issues that may impact the manufacturing delivery schedule.
• Document findings, communicate results, make technical presentations, and may represent the organization as the prime technical contact on tooling related projects.
• Investigate manufacturing problems and recommend corrective action.
• Develop and maintains Tool Design and Drawing Standards.
• Study specifications and confer with engineering and shop personnel to resolve design problems related to material characteristics, dimensional tolerances, service requirements, manufacturing procedures, and cost of tools.
• Prepare models, drawings, engineering changes, and specifications.
• Facilitate project updates to management, and engage frequently with engineers.
• Interface daily with many departments at various technical and management levels.
• Develop, evaluate, and improve tool manufacturing methods, utilizing knowledge of product design, materials, thermal coefficients, fabrication processes, production equipment capabilities, assembly methods, and quality control standards.
• Estimate tool production times, staffing requirements, and related costs to provide information for management decisions.
• Confer with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate tool production or procurement.


Requirements:
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline plus 5 years on the job experience.
• 10+ years of role related experience may be substituted for formal education.
• Experience in aircraft composite fabrication and assembly processes.
• Knowledge of lean manufacturing philosophies and tools.
• Excellent verbal and written communication skills.
• Excellent interpersonal and coaching skills.
• Ability to interact with all levels of the organization.
• Excellent Organizational Skills and problem-solving skills.
• Strong team player
• Excellent computer skills, word, excel and PowerPoint.
• CAD experience (Catia V5 preferred, but any CAD experience acceptable)
• Ability to read, interpret and create engineering drawings.
• Knowledge and experience with AS9100 a plus.
• Experience with manufacturing based ERP systems a plus.
• Knowledge of GD&T a plus
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 276
Job Location: Mojave, CA
Rate: $58-$65/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Tool Design Engineer designs various tooling, fixtures for machining, welding, assembly, handling, ground support and composites tooling.
The Tool Designer will also serve as technical support for tooling related issues on new and legacy product designs and manufacturing processes. Must have ability to prepare standard work packages for offload, and develop conceptual designs. In addition, be able to perform tool stress analysis.

Additional Job Details:
BS degree OR 5-10 year's experience as a Tool Design Engineer in a Manufacturing Environment required (Aerospace prefered).
Strong Mechanical/Manufacturing Aptitude.
Good understanding of assembly, machining and composite manufactuiring processes.
Good understanding of tool fabrication processes including welding, machining, heat treat, etc.
Good understanding of ANSI Dimensioning and Tolerancing.
Knowledge of CAD/CAM systems, CATIA V5 MBD (2000 hours minimum) experience preferred.
Experienced in Lean manufacturing principles and strong aptitude towards implementing continous improvement.
Experienced in Microsoft Office applications (Word, Outlook, Powerpoint, etc.) and good technical writing skills. Experience with with tooling stress analysis in FEM and classical methods.
 
Job Number: 51328
Job Location: Chula Vista, CA
Duration: 11 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Back to Advanced Job Search