Job Search Results

482 listings were found that matched your search words: Keywords: Electronic ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2020/01/28 Tuesday 07:05PM Pacific Time by ContractJobHunter. )

Listings 1 - 482

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
1741 Systems Engineer Level 3 - ACTIVE SECRET CLEARANCE - (10 Positions)

Description:
1741 Systems Engineer Level 3 - ACTIVE SECRET CLEARANCE - (10 Positions)
Clifton, New Jersey 07014

Duration 12 months

Electronic Systems

NOTES:

1. Total of 10 positions needed
2. MUST HAVE ACTIVE CLEARANCES - no interim clearances accepted

Job Description:

Perform technical planning, system integration, verification and validation activities in support of programs and development efforts.
• Ensure the logical and systemic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
• Perform functional analysis, timeline analysis, detail trade studies, requirements, and allocation and interface definition studies to translate customer requirements into hardware and software specifications.
• Perform Cost, Risk, and Supportability and Effectiveness analyses for total systems (concept, design, fabrication, test, installation, operation, maintenance & disposal)
• Work in a highly dynamic hardware & software development and integration lab
• Support/lead technical proposals, including decomposition of customer requirements into a system architecture/design, technical writing, technical risk management, cost estimating, etc.

Contact Phone Number: 813-510-3032
Email: christion@bentleygr.com
 
Job Number: 1741
Job Location: Clifton NJ
Rate: 60-65
Per Diem: Yes
Overtime: Possible
Duration: 12 MONTHS +
Start Date: 2 weeks from offer date
Input Date: 11/08/2019
Firm Name: BENTLEY GLOBAL RESOURCES LLC
Attention: Christion
Address: 3937 TAMPA RD STE 3
City, State: OLDSMAR, FL 34677-3115
Phone: 813/510-3032
Fax Phone: 813/854-1605
Website: www.bentleygr.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/18/2019
Last Updated: 12/06/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership.
2. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.
3. Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments.
4. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team.
5. Requires use of MS Office software tools to compile data, reduce data, and generate reports.
6. Strong verbal and written communication skills are highly desirable.
7. Occasional overtime and odd hours required.
8. Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
9. Applicant selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
10. Must be able to obtain a Secret security clearance and be able to obtain special access program clearances.
11. Must be a US Citizen.
12. This position is located at a facility that requires special access.

Qualifications:
1. Level 4: BS+16 YRS or MS+14 YRS
2. Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation.
3. Experience in design and fabrication of high voltage, high current, high energy, and high power systems.
4. Experience with laboratory power equipment such as oscilloscope.
5. Experience leading teams.
6. Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets.
7. Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion.
8. Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays.
9. Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, Hall Effect transducers, and grounding rods.
 
Job Number: 11740
Job Location: Palmdale, CA
Rate: $90.00 - $102.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/21/2019
Last Updated: 11/14/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments CA

Description:
166650 Job Title: Aeronautical Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2228-1
Max Pay Rate: $102.00/hr
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
This position is deployed to the Revolutionary Technology Programs (RTP) team to provide technical expertise and leadership. Expected to support team’s performance on project related to the analysis, design, and testing of aerospace and plasma physics experiments.

Primary responsibilities will involve design and construction of pulsed power electronics, control systems relating to power systems, and data acquisition electronics to support fusion plasma physics experiments. Normal activities will include test procedure writing, performing hardware test & fault isolation and leading troubleshooting operations in a small fast, moving team. Requires use of MS Office software tools to compile data, reduce data, and generate reports.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Strong verbal and written communication skills are highly desirable.
Occasional overtime and odd hours required.
Candidate must be able to work in a manufacturing and laboratory environment, including wearing radiation safety badge.
--Experience in pulsed power or power systems design and fabrication and data acquisition systems design and implementation
--Experience in design and fabrication of high voltage, high current, high energy, and high power systems
--Experience with laboratory power equipment such as oscillo
--Experience leading teams
--Experience in utilizing energy storage devices such as batteries, ultra-capacitors, high voltage film capacitors, high current inductors, and electromagnets
--Experience in utilizing high power and high voltage semiconductors such as IGBTs, SCRs, and MOSFETs in power conversion
--Experience in utilizing high voltage and high power technologies such as spark gap switches, pulse transformers, high voltage relays
--Experience in utilizing high voltage and high current diagnostics such as high voltage probes, Rogowski coils, current transformers, hall effect transducers, and grounding rods

Qty 1 position
 
Job Number: JE-2228-1ATO
Job Location: Palmdale, CA
Rate: 102/hr DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 10/31/2019
Last Updated: 11/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Assembler
(U.S. Citizenship Required*)
Marion, MA
2019-10115
Responsibilities:
• Perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
• Work from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
• Make continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications.
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualification:
• This position supports a 9/80A-1st work schedule.
• Assembly process skills.
• Soldering skills.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree preferred but not required.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10115
Job Location: Marion, MA
Input Date: 10/31/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Assembler

Description:
PDS Tech, Inc. is seeking an Assembler in Clearwater, FL.

Please contact Casey Carrion via phone 719-510-0778 or email your resume to ccarrion@pdstech.com


Summary:
  • Assembles fabricated parts at floor stations
  • Tests and calibrates parts and mechanisms to meet tolerances and product specifications
  • Uses hand tools and power tools to assemble units according to product specifications
  • Identifies units that fail tests or tolerance levels and repairs as necessary
  • Relies on instructions and pre-established guidelines to perform the functions of the job
  • Works under immediate supervision
  • Primary job functions do not typically require exercising independent judgment
  • Typically reports to a supervisor or manager








 
Skills/Qualifications:
  • Due to government regulations, must be a US Citizen
  • High School Diploma or GED
  • 5-7 years of Assembler experience (i.e. soldering, wiring & electronics).
  • Ability to work with “fine pitch” components & detail chassis wiring
  • Working knowledge of computers strongly desired
  • IPC-7711/7721 IPC Certification Training
  • IPC/WHMA-A-620 Certification Training
  • Self-directed teaming skills
  • Good written & verbal communication skills
  • Continuous Improvement skills (6-Sigma); greenbelt is a plus
  • Good Team Player

 
Job Number: 1910108119
Job Location: Clearwater, FL
Duration: 6 months
Input Date: 10/24/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Casey Carrion
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fQ5JQAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering experience required - 2nd Shift - no clearance URGENT MA

Description:
166645 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2458-1
Max Pay Rate: $20.00/hr
Start Date: 11/4/2019
End Date: 11/2/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This is an Entry Level position.
This position does not require a BS Degree.

Skills: Category Name Required Importance Experience
Technical Skills Soldering No 1 < 1 Year Qty 1 position 2nd shift
 
Job Number: LMRMS-2458-1
Job Location: Marion, MA
Rate: 20/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
166618 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2423-1
Max Pay Rate: $22.00/hr
Start Date: 10/30/2019
End Date: 11/1/2020

Job Summary:
Builds complex sub-assemblies using a variety of tools including crimpers, lugging devices, torque devices and other complex and basic hand tools. Builds complex structural assemblies using blueprints and processes.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Fabricates complex wire harnesses with a variety of complex connecting devices. Reads and interprets complex wire diagrams, blueprints, drawings and work instructions. Solders complex components in sub-assemblies using a variety of techniques including j-hooks, turrets, etc.

Qualifications and Education Requirements
Technical, vocational and/or related military technical degree in electronics or related discipline.
Mandatory 10 + years of experience in aerospace and/or DOD manufacturing or modification involving the installation or modification of electronical components and electrical systems.
Thorough understanding of electrical theory and excellent understanding of electrical schematics and drawing.
Previous experience working in an ESD environment.
Ability to work with little to no supervision.
Very strong solder skills are a requirement.
Good written and communication skills.
Computer skills must be intermediate to advanced.

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years


Qty 3 positions
 
Job Number: LMRMS-2423-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 11/01/2019
Last Updated: 12/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering experience required - no clearance URGENT FL

Description:
166622 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2430-1
Max Pay Rate: $22.00/hr
Desired Start Date: 1/13/2020
End Date: 1/1/2021
Position Type: Contract

Additional Notes
Must have Soldering Experience, a test will be issued within the first 3 days of training.
*The supervisor is still in need of qualified candidates*

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on cable assemblies. Ability to work from diagrams and drawings, make initial layouts, and use hand and/or power tools.

May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test production or prototype assemblies and subassemblies according to specifications. Expected to read and comprehend assembly parts lists, assembly drawings and any related reference documentation. Builds in accordance with IPC-620 quality standards. Troubleshooting of process parameters to improve yield.

Qualifications and Education Requirements
• One year experience in IPC-620
• Must have good manual dexterity
• Strong mechanical build experience accurately interpreting written work instruction, drawings, sketches, and wiring diagrams.
• Experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Experienced with working with hand tools
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions
• Use of manual and automatic wire strippers.
Must have Soldering Experience.

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 4 positions
Will not get max pay rate without extensive experience
 
Job Number: LMRMS-2430-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 12/05/2019
Last Updated: 12/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance FL

Description:
166615
Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 2373-1
Max Pay Rate: $22.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
Mandatory Must be able to Solder
• Must have good manual dexterity
• Strong mechanical build experience accurately reading and interpreting written work instruction, drawings, sketches, and wiring diagrams.
• experienced with working in an Electro Static Discharge (ESD) environment
• Experienced with working with hand tools used in the assembly of cables and subassemblies
• Knowledge of cable termination including familiarity with crimping specifications and use of both automated and hand crimping tools
• Use of manual and automatic wire strippers.
• Good written and oral communication skills
• Good computer skills with ability to work from electronic work instructions.

Skills: Category Name Required Importance Experience
Technical Skills Soldering Yes 5 2 - 4 Years

Qty 2 positions
 
Job Number: LMRMS-2373-1
Job Location: Oldsmar, FL
Rate: 22/hr max
Duration: 12 months
Input Date: 10/17/2019
Last Updated: 12/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166612 Job Title: Assembler

Work Site Address: Marion, MA 02738
Job Number: 2358-1
Max Pay Rate: $21.00/hr
Start Date: 10/26/2019
End Date: 10/26/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.


Skills: Category Name Required Importance Experience
Technical Skills Ability to work in a production environment Yes 4 1 - 2 Years
Technical Skills Assembly Process Yes 5 1 - 2 Years
Technical Skills Basic Computer Skills Yes 6 1 - 2 Years
Technical Skills IPC-A-610 Yes 3 1 - 2 Years
Technical Skills IPC-J-STD Yes 2 1 - 2 Years
Technical Skills Soldering Yes 1 1 - 2 Years


Qty 3 positions
A BS Degree is NOT required for these positions.
 
Job Number: LMRMS-2358-1
Job Location: Marion, MA
Rate: 21/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance URGENT MA

Description:
166646 Job Title: Assembler


Work Site Address: Marion, MA 02738
Job Number: 2461-1
Max Pay Rate: $25.00/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract


Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position does not require a BS Degree.
Prefer candidates with J Standard as well as IPCA 6-10 and 6-20.

Qty 1 position
Hiring Manager would prefer to see candidates with J Standard as well as IPCA 6-10 and 6-20.
 
Job Number: LMRMS-2461-1
Job Location: Marion, MA
Rate: 25/hr max
Duration: 12 months
Input Date: 11/12/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler - no clearance WA

Description:
166712
Job Title: Assembler

Work Site Address: Bothell, WA 98021
Job Number: 2530-1
Max Pay Rate: $23.00/hr
Start Date: 11/7/2019
End Date: 5/7/2020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic, fiber optic, mechanical assemblies and sub-assemblies such as modules, boards, panels, fiber optic assemblies, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity or optical checks on work in process and completed. . May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and sub-assemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
This position does NOT require a BS Degree

Qty 2 positions
 
Job Number: LMRMS-2530-1
Job Location: Bothell, WA
Rate: 23/hr max
Duration: 6 months +
Input Date: 10/29/2019
Last Updated: 11/14/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables - 2nd Shift - no clearance FL

Description:
166638 Job Title: Assembler


Work Site Address: Clearwater, FL 34677
Job Number: 2467-1
Max Pay Rate: $20.00/hr
Start Date: 11/25/2019
End Date: 11/42020
Position Type: Contract

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
• Operate several different types of dispensing and coating machines to meet customer specifications.
• Mask and/or tape circuit boards in areas that are to be free of conformal coating or potting.
• Inspect assemblies to ensure proper coating coverage.
• Maintain the coating and dispensing machines to ensure proper operating condition.
• Remove any excess coating and perform manual touch-up of any areas the coating machine may miss so boards maintain a consistent high quality.
• Transport racks of circuit boards from one destination to another to continue the manufacturing process.
• Maintain machines including changing the fluids and mixers and cleaning machines to ensure proper and efficient operation.
• Perform general housekeeping duties to provide a safe and clean working environment at all times.
• Knowledge of various materials used.
• Must complete applicable Specific Function Training courses.
• Additional tasks may be assigned by the supervisor to accommodate fluctuating production requirements.
• Encapsulation of discrete assemblies.
• Replenishes chemicals, solvents, compounds, process fluids as required, including dispensing into secondary containers and chemical cleaning.
• Prepares and applies potting, bonding and coating compounds, lubricants, spray coats or insulated tape to a variety of components and assemblies, inclusive of all finishing processes.
• Advances or retrieves product, material, and tools in house and from local suppliers for self and others.

Qualifications and Education Requirements
• Ability to read and interprets prints, labeling diagrams and mixing ratios.




Qty 2 positions
2nd shift
 
Job Number: LMRMS-2467-1
Job Location: Oldsmar, FL
Rate: 20/hr max
Duration: 12 months
Input Date: 11/01/2019
Last Updated: 12/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / soldering / surface mount / IPC-610 or IPC J-STD-001 Certification - 2nd Shift - no clearance FL

Description:
166759 Job Title: Assembler

Work Site Address: Oldsmar, FL 34677
Job Number: 2259-1
Max Pay Rate: $20/hr
Start Date: 12/9/2019
End Date: 11/20/2020
Position Type: Contract / 2nd Shift

Job Summary:
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.

Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.

Qualifications and Education Requirements
• Must have a minimum of 3 years of experience as a SMT touch up or rework assembler and have above average surface mount and fine pitch soldering skills.
• Ability to hand solder components using soldering station
• Use microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids, insufficient solder, solder shorts, solder bridges, misaligned parts or leads, tombstoned and or billboarded components and any other solder defects that may occur during the SMT operation.
• Able to read instructions, identify standard SMT components and interpret assembly drawings.
• Able to work in a fast-paced environment where some overtime may be required.
• Able to sit for long periods of time and focus on tedious tasks.
• Strong communication and organizational skills and ability to work in a team oriented environment
• Experience working in a LEAN Manufacturing environment.
• Have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• IPC-610 or IPC J-STD-001 Certification

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills IPC-A-610 Yes 1 2 - 4 Years
Technical Skills J-STD-001 Yes 1 2 - 4 Years
Technical Skills Soldering Yes 1 2 - 4 Years
Technical Skills Surface Mount Technology Yes 1 2 - 4 Years

Qty 8 positions
2nd Shift
 
Job Number: LMRMS-2259-1
Job Location: Oldsmar, FL
Rate: 20/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 11/14/2019
Last Updated: 12/04/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Assembly & Test Technician - Level 3

Description:
PDS Tech Inc. is seeking an Assembly & Test Technician, in Northford, CT.

Summary:
Must have experience in electronic repairs, troubleshooting printed circuit boards 
Low Voltage Knowledge 

Responsibilities of the Test Technician will include:
  • Adhere to Test Technician standardized work. Work from schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products.
  • Analysis of test failures and trouble-shooting of products to component level using multi-meters, oscilloscopes, various other diagnostic equipments. 

     

Required Skills and Knowledge: 

• Knowledge of schematics, diagrams, work instructions, prints, and test specifications to test, evaluate, inspect and troubleshoot products. 

• Understanding of electronic circuits to include amplifiers, comparators, switching power supplies, A/D converters, microprocessors, filters, and oscillators. 

• Understanding of safe practices for working with electrical circuits. 

• Familiarity with surface mount and through-hole electronic components. 

• Ability to troubleshoot analog and digital circuits to the component level. 

• Understanding and application of ICT and functional testing of subassemblies. 





Qualification: 

• Associates Degree in Electronics Engineering or equivalent 

• Must possess effective written and verbal communication skill. 

• Must adapt well to a changing environment.  

• Experience using variable power supplies, multi-meters, oscilloscopes, and PCs. 

• Experience troubleshooting electronic circuits. 
 
 
Job Number: 1810090928
Job Location: Northford, CT
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Betsy Murphy
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002exuhAAA&URLSource=cjhunter

Avionic Technician

Description:
Chipton-Ross is seeking an Avionic Technician for an opportunity in Greenville, SC

RESPONSIBILITIES:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

DESIRED EXPERIENCE:
Aircraft Modification 2-4 years and C-130H 2-4 years

EDUCATION:
Accredited High School Diploma/GED

MISCELLANEOUS:
This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

WORK HOURS:
Full-Time, 9/80A-1st Shift

 
Job Number: 182557
Job Location: Greenville, SC
Rate: $DOE
Duration: 9 months
Input Date: 10/23/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Avionic Technician - no clearance URGENT SC

Description:
166688 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2464-1
Max Pay Rate: $29.50/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 1 2 - 4 Years
Areas of Expertise C-130H No 1 2 - 4 Years

Qty 8 positions
This is an URGENT request.
 
Job Number: JEG-2464-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 8 months plus extension
Input Date: 01/13/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionic Technician / C-130 desired - no clearance SC

Description:
165856/1895-1
Avionic Technician
Greenville, SC 29605
29/hr max

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

Areas of Expertise C-130 No 1 4 - 6 Years

Qty 5 positions needed
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG-1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 11/01/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Certification Engineer

Description:
Support the verification and test of high-performance Avionics hardware and systems.
• Perform system and component-level avionics requirements validation and verification
• Document failure mode, effects, and critical analysis (FMECA) cases and pursue corrective actions
• Write and update technical documentation for certification
• Capture and communicate technical risks and waivers
• Analyze test and flight data, to help with verification activities
• Detailed electronics design and analysis experience
• Experience with DO-160, MIL-STD-1540, or SMC-S-016 Environmental test standards
• Familiarity with ARP4754A, DO-254 and DO-178 and related Design processes
• Experience / exposure to IBM DOORs tool
 
Job Number: 4545
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Contract
Start Date: 2 weeks
Input Date: 05/02/2019
Last Updated: 01/28/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic Avellino
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience with avionic subsystems
2. F-35 factory or fleet/field experience
3. Previous experience with subcontractor technical management.
4. Electronic subsystems troubleshooting experience

Desired Skills:
1. Specific knowledge and hands on experience with CNI, Radar, EW, or ICP subsystems.
2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
3. F-35 program, PHM and Sustainment experience.
4. Electronic/optical device level knowledge
5. Ability to work across multiple internal and external customers/organizations to resolve technical and production issues.
6. Current F-35 program experience and clearances.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11747
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/22/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience with avionic sub-systems.
2. Previous experience with DD-1494 (Frequency Allocation Request) or Spectrum certification.
3. RF compatibility analysis or EEE (electromagnetic environmental effects) experience.

Desired Skills:
1. Specific knowledge and hands on experience with CNI subsystems.
2. Knowledge of IFF.
3. F-35 program experience.
4. Current F-35 clearances including SAP.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11743
Job Location: Fort Worth, TX
Rate: $72.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/22/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelor's degree in technical discipline
2. Experience with Aircraft Avionics systems

Desired Skills:
1. Active F-22 Projects Clearance
2. Experience presenting
3. Experience with customer interaction
4. Experience with AGILE
5. Diligent at maintaining relevant members apprised of task status
6. Experience with Microsoft Office tools (i.e. Excel, Outlook, and PowerPoint)

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11705
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
Chipton-Ross is seeking an Avionics Engineer for an opportunity in Fort Worth, TX

RESPONSIBILITIES:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

REQUIRED EXPERIENCE:
Experience in avionics or electronic warfare system integration and test.

Desired skills
Direct hands-on experience with system integration/testing and data analysis. Willingness to contribute in both technical and non-technical areas to ensure team/program success. Experience in product development and testing of supplier developed hardware.

EDUCATION:
Accredited Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


WORK HOURS:
Full-Time, 9/80-A

 
Job Number: 182273
Job Location: Fort Worth, TX
Rate: $DOE
Duration: 15 MONTHS
Input Date: 10/11/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret is acceptable****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university.
2. Experience in avionics or electronic warfare system integration and test.

Desired Skills:
1. Direct hands-on experience with system integration/testing and data analysis.
2. Willingness to contribute in both technical and non-technical areas to ensure team/program success.
3. Experience in product development and testing of supplier developed hardware.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11704
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/11/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Avionics Engineer

Description:
Chipton-Ross is seeking an Avionics Engineer for an opportunity in Fort Worth, TX

RESPONSIBILITIES:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

REQUIRED EXPERIENCE:
Experience working electro-optic (EO) systems.

Desired skills
Active F-22 Project Clearance desired.
The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

EDUCATION:
Accredited Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


WORK HOURS:
Full-Time, 9/80-A

 
Job Number: 182271
Job Location: Fort Worth, TX
Rate: $DOE
Duration: 15 MONTHS
Input Date: 10/11/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/09/2019
Last Updated: 12/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.
Experience with aircraft systems

Desired Skills:
1. Experienced in design, development, integration and test of datalink systems.
2. Familiar with DoD contracting and product acquisition.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11681
Job Location: Fort Worth, TX
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/09/2019
Last Updated: 12/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
1. Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
2. Any familiarity with JSF avionics suite or systems engineering processes.
3. JSF program clearance.
4. Good communication and analytical skills.
5. Experience designing, programming and testing mission data
6. Experience in data analysis of Combat Integrated Mission System
7. Experience with Electronic Warfare Integrated Reprogramming (EWIR)
8. Hands on lab testing of RF systems
9. Experience with Foreign Military Exploitations (FME)
10. Proficient with Microsoft Office products and Database applications

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11673
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/09/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in a related technical field
2. Experience with mission systems/avionics

Desired Skills:
1. Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
3. Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
4. Prior supplier management experiences a plus.
5. Familiarity with JSF toolsets: SIMS & PDM.
6. Current F-35 program experience and clearances.
7. Must be able to acquire a SAR clearance.
8. CNI, Radar, EW, or related avionics functions technology, and product development experience.
9. Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11623
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS in technical discipline and at least one year professional experience
2. Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired Skills:
1. Knowledge of RF, EW and/or CNI
2. Ability to understand and apply electronics engineering principles to development
3. Experience developing subsystem design/engineering documentation.
4. A working knowledge of tools for requirements and verification Traceability.
5. Experience with Agile Methodology
6. Ability to work with suppliers to generate verification and validation plans
7. Strong oral written communication skills
8. Strong interpersonal and collaboration skills
9. Strong work ethic and self-motivation

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11625
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired Skills:
1. MATLAB and/or C++ for analysis tool development
2. Familiarity with JSF avionics suite and systems engineering processes.
3. Familiarity with data analysis tools (e.g. Matlab)
4. Familiarity with JSF tools including SIMS and Dimensions
5. Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
6. Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
7. Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11628
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
1. Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
2. Any familiarity with JSF avionics suite or systems engineering processes.
3. JSF program clearance.
4. Good communication and analytical skills.
5. Experience designing, programming and testing mission data
6. Experience in data analysis of Combat Integrated Mission System
7. Experience with Electronic Warfare Integrated Reprogramming (EWIR)
8. Hands on lab testing of RF systems
9. Experience with Foreign Military Exploitations (FME)
10. Proficient with Microsoft Office products and Database applications

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11624
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/22/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Avionics Engineer / F-35 avionic subsystems - Clearance TX

Description:
166665
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2232-1
Max Pay Rate: $72.00/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Basic Qualifications
Experience with avionic subsystems
F-35 factory or fleet/field experience
Previous experience with subcontractor technical management.
Electronic subsystems troubleshooting experience

Desired skills
Specific knowledge and hands on experience with CNI, Radar, EW, or ICP subsystems.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
F-35 program, PHM and Sustainment experience.
Electronic/optical device level knowledge
Ability to work across multiple internal and external customers/organizations to resolve technical and production issues.
Current F-35 program experience and clearances.

Qty 2 positions
 
Job Number: JE-2232-1S
Job Location: Fort Worth, TX
Rate: 72/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Engineer / RF flight test EWS ECM EW Radar TX

Description:
166522 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2179-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.

Desired skills
Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
• Any familiarity with JSF avionics suite or systems engineering processes.
• Good communication and analytical skills.
• Experience designing, programming and testing mission data
• Experience in data analysis of Combat Integrated Mission System
• Experience with Electronic Warfare Integrated Reprogramming (EWIR)
• Hands on lab testing of RF systems
• Experience with Foreign Military Exploitations (FME)
• Proficient with Microsoft Office products and Database applications



Qty 2 positions
 
Job Number: JE-2179-1ATO
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/07/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Engineer / RF compatibility analysis or EEE (electromagnetic environmental effects) experience - Clearance TX

Description:
166653 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2231-1
Max Pay Rate: $72.00/hr
Start Date: 10/29/2019
End Date: 1/29/1021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
Experience with avionic sub-systems
Previous experience with DD-1494 (Frequency Allocation Request) or Spectrum certification
RF compatibility analysis or EEE (electromagnetic environmental effects) experience

Desired skills
Specific knowledge and hands on experience with CNI subsystems.
Knowledge of IFF.
F-35 program experience.
Current F-35 clearances including SAP.


Qty 1 position
 
Job Number: JE-2231-1S
Job Location: Fort Worth, TX
Rate: 72/hr max
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166552
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2306-1
Max Pay Rate: $62.26/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Bachelor's degree in an Electrical Engineering or related technical discipline or science from an accredited college/university
Experience in avionics or electronic warfare system integration and test.
Desired skills
Direct hands-on experience with system integration/testing and data analysis.
Willingness to contribute in both technical and non-technical areas to ensure team/program success.
Experience in product development and testing of supplier developed hardware.

Qty 1 position
 
Job Number: JE-2306-1S
Job Location: Fort Worth, TX
Rate: 62.26/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / F-16 datalink systems / integration test- Clearance TX

Description:
166533 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2183-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Exp w/ Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
Experience with the verification and sell off of a subsystem to a customer through formal test events.
Experience developing subsystem design/engineering documentation.
Experience with Agile Software Development and/or SCRUM processes.
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation
Strong Interpersonal & Collaboration Skills
Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.


Qty 1 position
 
Job Number: JE-2183-1S
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/05/2019
Last Updated: 12/09/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166416
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2086-1
Max Pay Rate: $62.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Qualifications
Equivalent years of hands on experience with the operations of radio frequency (RF) systems (EW or Radar) or a bachelor’s degree from an accredited college in a related discipline.
Desired skills
Laboratory and/or Flight Test of Electronic Warfare Systems (EWS), Radar Systems or Electronic Counter Measure (ECM) Systems.
• Any familiarity with JSF avionics suite or systems engineering processes.
• JSF program clearance.
• Good communication and analytical skills.
• Experience designing, programming and testing mission data
• Experience in data analysis of Combat Integrated Mission System
• Experience with Electronic Warfare Integrated Reprogramming (EWIR)
• Hands on lab testing of RF systems
• Experience with Foreign Military Exploitations (FME)
• Proficient with Microsoft Office products and Database applications


Qty 1 position
 
Job Number: JE-2086-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 01/08/2020
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166417
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2147-1
Max Pay Rate: $65.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+0-3 YRS
Basic Qualifications
BS in technical discipline and at least one year professional experience
Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired skills
Knowledge of RF, EW and/or CNI
Ability to understand and apply electronics engineering principles to development
Experience developing subsystem design/engineering documentation.
A working knowledge of tools for requirements and verification Traceability.
Experience with Agile Methodology
Ability to work with suppliers to generate verification and validation plans
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation

Qty 1 position
 
Job Number: JE-2147-1S
Job Location: Fort Worth, TX
Rate: 65/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/02/2019
Last Updated: 01/02/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1


Qty 2 positions
 
Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 10/01/2019
Last Updated: 01/02/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166415
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2084-1
Max Pay Rate: $62.26/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

CNI, Radar, EW, or related avionics functions technology, and product development experience.
Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Basic Qualifications
Bachelor's degree in a related technical field
Experience with mission systems/avionics

Desired skills
Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
Prior supplier management experience a plus.
Familiarity with JSF toolsets: SIMS & PDM.
Current F-35 program experience and clearances.

Qty 2 positions
 
Job Number: JE-2084-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 12/16/2019
Last Updated: 01/02/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Systems Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the HondaJet aircraft.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
2. Minimum of 6 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test.

Knowledge, Skills and Abilities:
1. Working knowledge of design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
6. Proficiency in requirements management tools such as DOORS
7. Proficiency in PLM Tools such as TeamCenter and SAP.
8. Ability to handle complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-006
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Possible
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer

Description:
Creation and implementation of Parts Management Plans (PMP).
Assist design engineers in the selection of parts.
Evaluate, approve, and document new parts selected for new design or modified equipment.
Experience in Military Aviation Electronics product development and support
Proficient in MS Office (especially Excel and Access)
Understanding of MIL-STD-3018, MIL-STD-883, MIL-STD-750, and similar standards
Proficiency with Deltek Costpoint ERP and Cognos
Proficiency with IHS BOM Manager or QStar
Bachelor degree in an Engineering field with six years of experience.
www.hi-tecsolutions.com/jobs
 
Job Number: 1836361
Job Location: Atlanta, GA
Rate: Open
Input Date: 11/04/2019
Last Updated: 11/15/2019
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Cost Estimator

Description:

PDS Tech, Inc. is seeking a Senior Cost Estimator in St. Louis, MO. 

Job Summary


This position is to prepare labor and material estimates, evaluate technical requirements and support the engineering group with analysis of product cost and parametric modeling.

Job Responsibilities 

  • Analyze specifications, statements of work, and other documentation to prepare time, cost, and labor estimates
  • Demonstrated knowledge in BOM part production manufacturing methods, build cycle times, and various 'make-from' material types.
  • Sound reasoning and mathematical skills including an understanding of labor learning curve impact calculations.
  • Collect and review data and develop estimating techniques, including parametric estimating models, for use in preparation of estimates


  • Prepare analysis and verification of product costs in support of special projects from the engineering group
  • Coordinate with internal and external customers to clearly define program criteria to satisfy requests for pricing requirements.


Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss. 


Required Qualifications:
  • Must have an Active DoD Secret Clearance
  • Excellent computer skills (EXCEL, PowerPoint, & Word).
  • Associates degree in Engineering, Technology, Aviation Management - OR - in lieu of degree, 2 years of aerospace manufacturing experience
  • 2 years of experience in estimating techniques or labor time standard development
  • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.

Preferred Qualifications 

  • Experience with electronic modeling software such as NX(UG) and CATIA – to review models for development of fabrication cost estimates
  • Experience with blue print reading, model-based definition, GD&T and related aspects of aerospace design criteria
  • Understanding of contractual agreements (FAR, TINA).
  • Strong analytical and planning skills
  • Excellent computer skills (MS Office Suite).
  • Experience in engineering, manufacturing, fabrication processes and major assembly aerospace/aircraft structures and systems, and airframe manufacturer’s business, policies and practices.
  • Excellent written and verbal communication and collaboration skills

Please send resumes to Gus Sanchez at: gsanchez@pdstech.com or call 314-264-3135 to discuss
 
Job Number: 1910105335
Job Location: Hazelwood, MO
Per Diem: Yes
Duration: 6 months
Input Date: 08/09/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GWPYQA4&URLSource=cjhunter

Cyber Software Engineer

Description:
PDS Tech, Inc. is seeking am Cyber Software Engineer in Baltimore, MD.
Description: 

  • Roles and Responsibilities:
    Designs, develops, documents, tests and debugs applications software and systems that contain logical and mathematical solutions. Conducts multidisciplinary research and collaborates with equipment designers and/or hardware engineers in the planning, design, development, and utilization of electronic data processing systems for product and commercial software. Determines computer user needs; analyzes system capabilities to resolve problems on program intent, output requirements, input data acquisition, programming techniques and controls; prepares operating instructions; designs and develops compilers and assemblers, utility programs, and operating systems. Ensures software standards are met. Java and Nifi are highly desired.
     

Qualifications: Targeted Skills:
- Java and other high level development languages
- NiFi
- Linux OS
- Scripting Languages (Javascript, Perl, PHP, Python, Ruby, etc...)

Education: B.S. in Computer Science or other STEM field or 4 years of relevant software development/engineering experience in lieu of degree

Security Clearance: Active TS/SCI w/Polygraph

Desired Additional Skills/Backgrounds:
- Cyber Security
- RESTful
- Agile
- Jira
- C/C++
- Python
- Cloud (Apache Hadoop/AWS)
- Cloud development certification
- Spring
- Angular
- Test Automation
- Android app development
- UI/UX
- Database Administration
 
 
Job Number: 1910104515
Job Location: Annapolis, MD
Duration: 12 months
Input Date: 07/16/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTvLQAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Database Admin II

Description:
We have an outstanding Contract to Hire position for a Database Administrator to join a leading Company located in the O'Fallon, IL surrounding area.

** Candidate must be able to obtain and maintain a Secret Security Clearance. **
Please click on this link if you have any questions on how to obtain a clearance:
https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Job Responsibilities:
Serves as a Development Lead for multifaceted reengineering of systems to support business operations.
Designs develop and manage the implementation of cloud-based and SOA based Integrated Booking System framework, methodology, and tools to ensure business continuity of operations across a large, multi-division, decentralized organization.
Supports multi-language, multi-platform, and multi-operating system operations and utilizes electronic commerce and Electronic Data Interchange (EDI) applications.
Recognizes and recommends new or emerging technology or software to satisfy functional requirements and processes.
Provides highly technical and/or specialized guidance concerning automation solutions to complex information processing problems related to the subject field.
Provides customer support using enterprise solutions software to integrate business areas, consistent with today’s technology in order to operate in an open systems environment and client service architectures.
Performs high-level, day-to-day operational maintenance, support, and upgrades for complex database management systems workstations and servers on multiple operating systems. Implements and maintains smooth operation and physical design of databases.
Coordinates direct and performs complex database software installations and upgrades to operating systems and related database software packages.
Schedules installations and upgrades and maintains them in accordance with established IT policies and procedures.
Continually monitors and tunes multiple database systems and databases to achieve optimum performance levels.
Ensures database data integrity by evaluating, implementing, and managing appropriate solutions of varying complexities.
Ensures database recoverability by developing and implementing a schedule of database backups and archive operations.
Plans and implements the modernization of database implementations.
Develops, implements, and promotes standard operating procedures and schedules.
Conducts audits of databases to ensure compliance with established standards, policies, and configuration guidelines.
Develops and implements new standards, policies, and procedures.

Basic Hiring Criteria:
Bachelor's and five (5) years or more experience; Masters and three (3) years or more experience; Ph.D. and 0 years related experience.
Complete understanding and wide application of technical principles, theories, and concepts in the field.
General knowledge of other related disciplines.
Receives assignments in the form of objectives and establishes goals to meet outlined objectives.
Work is reviewed by management to measure whether objectives have been met.
Provides technical solutions to a wide range of difficult problems where analysis of data requires evaluation of identifiable factors.
 
Job Number: 38518
Job Location: O'Fallon, IL
Rate: $51.17
Per Diem: NO
Overtime: YES
Duration: 6 Month +
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 11/12/2019
Firm Name: TAD PGS INC
Attention: Amy Dawkins
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

Design Engineer Sr

Description:
Chipton-Ross is seeking a Design Engineer Sr for an opportunity in Littleton/Waterton, CO

RESPONSIBILITIES:
Candidate will be responsible for Printed Circuit Board (PCB) design and documentation utilizing Zuken CR-8000 software. Must be able to interface efficiently with mechanical and electrical stakeholders. Effort will consist of simultaneous oversight of multiple cards as they progress through schematic capture, PCB placement and routing, and the creation of fabrication and assembly documentation. Completed PCB designs will be subject to review by the Producibility team to ensure future manufacturing issues are kept to a minimum. Unique design requirements will be communicated at the start of the design effort and the designer will confirm successful incorporation of the requirements during multiple design reviews.

REQUIRED EXPERIENCE:
Experience with layout and routing in Zuken CR-8000 Demonstrated PWB or PCB design cycle experience. Basic knowledge of PWB or PCB design and fabrication as documented in industry standards.

PREFERRED EXPERIENCE:
-Experience with Downstream Blueprint for PCB fabrication and assembly drawing creation. -Experience designing space electronics. -RF layout and routing experience. -High speed digital/mixed signal routing experience. -Rigid-flex layout experience. -Basic understanding of PCB fabrication and assembly processes. -IPC CID certification and familiarity with IPC-2221/2222 and IPC-6012. -Experience with interfacing with PWB manufacturers. -Experience with training new designers. Experience with schematic capture, PWB layout and routing, assembly drawing creation and processing design packages through final release. -Basic understanding of electrical engineering concepts as applied to PCB/CCA design and assembly.

EDUCATION:
Accredited Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 5 years of professional experience; or 3 years of professional experience with a related Master's degree.

WORK HOURS:
Full-Time, 9/80

 
Job Number: 180156
Job Location: Littleton/Waterton, CO
Rate: Up to $52.11 DOE
Duration: 6 MONTHS
Input Date: 07/02/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Oklahoma City, OK
2019-10166
Responsibilities:
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
• Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects.
• Assignment will provide an excellent opportunity to learn aircraft power systems on the various platforms.
• This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.
• Other job responsibilities may include
• Lead work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Lead analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Lead testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Work with other to develop program test strategies.
• Manage performance of critical suppliers to ensure system integration and compliance with requirements.
• Conduct program independent reviews and reports results to program leadership.
• Provide critical support of fielded hardware and software over the entire product lifecycle.
• Lead research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Work under consultative mentorship.

Qualification:
• This position requires an active (or ability to obtain) U.S. Top Secret Security Clearance.
• Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.
• Willingness to travel at least 25% of the time as required
• Highly motivated and must work well in a team environment.
• The ability to communicate effectively, both verbally and in writing
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience).
• ABET accreditation is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10166
Job Location: Oklahoma City, OK
Input Date: 11/06/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Design and Analysis Engineer
(U.S. Citizenship Required*)
Berkeley, MO
2019-10125
Responsibilities:
• Lead work with customers to develop and document complex electronic and electrical system requirements.
• Lead and coordinate work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Lead work to test and validate to ensure system designs meet operational and functional requirements.
• Oversee the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solve problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Research technology advances for potential application to company business needs.
• Make recommendations for technology investments.
• Understand and apply job practices, techniques, standards, principles, theories, and concepts.
• Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements.
• Develop statement-of-work and technical performance specifications.
• Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle.
• Test and validate to ensure system designs meet operational and functional requirements.
• Resolve product integration issues and production anomalies.
• Support fielded hardware and software over the entire product lifecycle.
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.
• Monitor supplier performance to ensure system integration and compliance with requirements.

Qualification:
• The ability to obtain a Secret Securiy Clearance is required at time of hire.
• Must have good communication, analytical, and organizational skills and be able to work in a team environment - previous design team or special project team participation is desired.
• Ability to conceive, develop, optimize, maintain and modify electronic/electrical system designs based on requirements is desired.
• Ability to provide technical coordination with internal and external suppliers and customers is a plus.
• Knowledge of design concepts and techniques (e.g., concurrent engineering, Model-based Engineering, Design for Manufacture/Assembly [DFM/A]) is preferred.
• Knowledge of data system design, and architectures is desired.
• Knowledge of system security design principles and industry and government guidance and regulations which engineers apply to produce secure systems is desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's Degree combined with 9+ years of experience, or a Master's Degree with 7+ years of experience, or a PhD with 4+ years of experience.
• Bachelor's degree in electrical or computer engineering is highly desired
• Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10125
Job Location: Berkeley, MO
Input Date: 11/04/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking an Electrical/Electronic Systems Engineer 3 for an opening in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181534
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 09/09/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:00 AM - 3:30 PM

MISCELLANEOUS:
OKC is on 9/80 work schedule.
 
Job Number: 181349
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 08/29/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking 3 Design and Analysis Engineer 3's for openings in Hazelwood, MO.

RESPONSIBILITIES:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

Candidarte should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES - 10%

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 4:30 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 181215
Job Location: Hazelwood, MO
Rate: $DOE
Duration: 12 Months
Input Date: 08/22/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opportunity in Oklahoma City, OK.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

Leads work with customers to develop and document complex electronic and electrical system requirements.
Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
Leads work to test and validate to ensure system designs meet operational and functional requirements.
Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
Researches technology advances for potential application to company business needs.
Makes recommendations for technology investments.
Works under minimal mentorship.

EDUCATION:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

WORK HOURS:7:30AM-4:00PM
Full-Time/First Shift

TRAVEL REQUIRED: Yes

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 182602
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 4 for an opening in Long Beach, CA.

RESPONSIBILITIES:
Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:30 PM
 
Job Number: 182329
Job Location: Long Beach, CA
Rate: $DOE
Duration: 6 Months
Input Date: 10/11/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rbarrett@chiptonross.com
Website: www.chiptonross.com

Electrical Systems Design and Analysis Engineer 5

Description:
PDS Tech, Inc. is seeking an Electrical Design and Analysis Engineer in Oklahoma City, OK.

Summary:
  • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

    Other job responsibilities may include
    • Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
    • Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
    • Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
    • Works with other to develop program test strategies.
    • Manages performance of critical suppliers to ensure system integration and compliance with requirements.
    • Conducts program independent reviews and reports results to program leadership.
    • Provides critical support of fielded hardware and software over the entire product lifecycle.
    • Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
    • Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
    • Works under consultative mentorship.

     

Basic Qualifications (Required Skills and Experience)

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

 
 
Job Number: 1910108677
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Elisa Petersen
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJWQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design
 
Job Number: 19-15064
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: Immediately
Input Date: 11/06/2019
Last Updated: 12/04/2019
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Design and Analysis Engineer 5

Description:
Chipton-Ross is seeking a Design and Analysis Engineer 5 for an opportunity in Oklahoma City, OK

RESPONSIBILITIES:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
Works with other to develop program test strategies.
Manages performance of critical suppliers to ensure system integration and compliance with requirements.
Conducts program independent reviews and reports results to program leadership.
Provides critical support of fielded hardware and software over the entire product lifecycle.
Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
Works under consultative mentorship.

REQUIRED EXPERIENCE:
Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

WORK HOURS:
Full-Time/First Shift

 
Job Number: 182841
Job Location: OK City, OK
Rate: $DOE
Duration: 6 MONTHS
Input Date: 11/06/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Test Set Developers and FPGA Developers

Description:
Summary: •Seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment.
•The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
•Will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries.
•Must be able to work with without appreciable direction.

Basic Qualifications: •9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD.
•Demonstrated proficiency using digital test equipment.
•Demonstrated proficiency developing digital electronics.
Preferred Qualifications: •Experience designing high speed FPGAs.
•Experience developing digital test systems.
•Experience testing and validation of digital space electronics.
 
Job Number: 1910097060
Job Location: Manhattan Beach, CA
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 11/15/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

ELECTRICAL ASSEMBLER

Description:
Displays knowledge of Electrical Theory and usage of NEC and NFPA 79 in the assembly of machines with AC and DC circuits. Reads engineering drawings to assemble, rebuild, and repair electrical components.  Sets up and operates a variety of power tools (such as drill press, band saw and stud welder), to assist in the assembly of machines and components. Works unsupervised and provides training and cross-training to other employees. Coordinates with engineering personnel, and makes changes as required to update print packages.
ESSENTIAL DUTIES:
Applies electronic theory and electrical testing procedures to layout, build, test, troubleshoot, repair and modify electrical equipment.
Assembles electrical components, sub-assemblies, and systems according to engineering drawings.  Positions and aligns parts in specified relationship to each other.  Mounts assembled components and attaches functional and cosmetic hardware such as caps, clamps and knobs.
Connects components and routes wires between individual components, using connectors, terminals, soldering and other wiring procedures.
Diagnoses malfunctioning electrical components using test equipment, computer, and engineering drawings. Test runs machines to ensure proper operation of components such as photo-eyes, limit switches and solenoid valves.  Tests for proper sequencing of machine operations. Assists R & D technicians and engineering in developing new equipment.
Sets up and operates a variety of hand tools such as drill press, saws, shear and break.  Operates tow motor, pallet jack, hoist, pipe bender, pipe threader, and overhead crane to aid in the safe handling of raw materials and fabricated parts.
Uses business system to enter time spent working on assemblies/sub-assemblies and to complete operations.
Uses PC to interface with programmable controllers and servo modules, transfer drive parameters and run diagnostics checks.  Must be able to manually load programs into electrical components.
Completes final inspection checklist and inspects equipment for quality. Assists Technical Service with in house testing and field installation of machinery.
Coordinates with engineering to ensure Engineering Change Requests are submitted.
Ensures that Engineering Change Orders are processed and assembled.
Responsible to meet ISO quality standards which require individuals to take responsibility for their own quality, verify their work is correct and then affix their signature to the appropriate documentation (i.e., drawing, checklist, etc.).
Assists other departments to optimize throughput.
 
Completion of a Vocational Diploma in an electrical-related field, or equivalent experience or training. Must be computer literate and capable of reading engineering drawings.  Must have tools required to perform daily routines. Must be capable to set up and operate power tools.  Possesses basic knowledge of oscilloscope. Position requires a team player who is quality conscious, industrious and detail oriented. 

2nd shift Hours:  Mon-Thurs 2:25pm to 12:55am, 4-10's
3rd Shift Hours:  Mon-Thurs 9:30pm to 8:00am, 4-10's
 
 
Job Number: 1910107526
Job Location: Appleton, WI
Duration: 6 months
Input Date: 10/10/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Karen Reno
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fNb0QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:
• Digital and mixed signal design,
• Configurable logic (FPGA/firmware) design,
• RF Design and
• Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:
• Active Secret DoD Security Clearance or the ability to obtain and retain one.
• US Citizenship
• Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
• A self-motivated and effective communicator
• Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
• Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:
• Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Experience with intellectual property generation (patents & publications)
• Team and project leadership skills
• Knowledge of software and/or FPGA code development
• Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree
 
Job Number: 1910107926
Job Location: Indianapolis, IN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 12/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Electrical Design and Analysis Engineer 3

Description:
Chipton-Ross is seeking a Electrical Design and Analysis Engineer 3 for an opportunity in Oklahoma City, OK.

RESPONSIBILITIES:
Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products. Develops high-level and detailed designs consistent with requirements and specifications. Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Supports Supplier Management with make/buy recommendations and other technical services of limited scope. Provides engineering support throughout the lifecycle of the product. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Works under general direction.

OKC Electronic Products Group is seeking experience electrical circuit design engineers. The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft (B-52, B-1B, B-2, AEW&C, AWACS, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft circuit design on the various platforms.

Assignments may deal with

Reviewing supplier and partner qualification data.
Circuit Analysis/Layout/Design/Manufacturing.
FPGA design/development/integration.
Perform Trade Studies/Modeling.
Cross-functional coordination and integration.
Develop Design Requirements and Plans.
Provide Engineering Support to Supplier Management Procurement Activities.
Perform Engineering Investigations and Troubleshooting Efforts.
Develop and perform Acceptance Test Procedures.
Test Automation for aircraft modifications.

Other job responsibilities may include

Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
Develops high-level and detailed designs consistent with requirements and specifications.
Validates designs through various methods of review, testing and analysis. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements.
Supports Supplier Management with make/buy recommendations and other technical services of limited scope.
Provides engineering support throughout the lifecycle of the product.
Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
Works under general mentorship.

EDUCATION:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard

WORK HOURS: 7:30AM-4:00PM
Full-Time/First Shift

TRAVEL REQUIRED: Yes

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 182607
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Design and Analysis Engineer 4

Description:
Chipton-Ross is seeking 3 Electrical Design and Analysis Engineer 4's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the lifecycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

EDUCATION:
Accredited education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 182646
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/28/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Lucas Medina
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmedina@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer to provide direct support to Project Manager by interfacing with critical electronic component & subsystem suppliers. Manage engineering projects of moderate to large size and significant complexity, and of strategic importance.

Must have working knowledge of creating and integrating moderately complex electrical designs using CAD systems.
 
Job Number: 47407
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 10/31/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer ( Ronkonkoma, NY )

Description:
Electrical Engineer ( Ronkonkoma, NY ) 9613193
12 Month Contract

Pay Rate: $50-60/hr

*Job Duties:
- Candidate will be responsible for supporting test program activities in the Aerospace Propulsion Laboratory.
- Under the direction of senior engineering, the individual will be responsible performing a variety of basic engineering tasks associated with the analysis, design, or testing of electronic and data acquisition systems as well as developing, creating and modifying computer applications software.
- Effectively communicate and portray design approach and functionality to other team members and lab users.
- Apply theoretical knowledge and engineering technical principles under the guidance of senior engineers to solve basic electrical engineering problems.
- Create block diagrams, wiring diagrams, interconnect diagrams, and detailed assemblies.
- Prepare and present preliminary, critical and test readiness reviews in support of test programs.
- Development, integration, and documentation of laboratory systems, electrical cable designs and electrical assemblies for test facility.
- Design, integrate, and troubleshoot electrical designs of a functional system including commercial off the shelf (COTS) electro-mechanical components such as connectors, relays, switches, circuit breakers, etc.
- Test procedure, script development and execution at the system level.
- Support test rig/hardware installation, instrumentation, test execution and troubleshooting.
- Establish requirements and procedures to evaluate purchased equipment or EEE parts. Under supervision, supports the testing and/or evaluation/ validation of one or more elements of an electrical.
- Assist with the development of review material, reports, documenting and presenting findings.

*Education Requirements:
- BS in Electrical Engineering & 2 years, OR Master’s Degree in Electrical Engineering.//
 
Job Number: 9613193
Job Location: Ronkonkoma, NY
Rate: 50-60
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 01/05/2020
Last Updated: 01/05/2020
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 08/28/2019
Last Updated: 01/15/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

Electrical Engineering Test Tech

Description:


PRIMARY FUNCTION:
The Electrical Engineering Test Technician will perform configuration and acceptance testing of complex electronic systems/assemblies, by applying principles and theories of electronics, electrical circuitry, engineering mathematics, electronic and electrical testing.
This position follows a 4x10 compressed workweek schedule.
JOB DUTIES:
 
  • Test product, using standard test equipment and procedures, and analyze results to evaluate performance and determine need for adjustment.
  • Assemble, test, and maintain circuitry or electronic components according to engineering instructions, technical manuals, and knowledge of electronics, using hand and power tools.
  • Read schematic drawings and engineering instructions for assembling electronics units, applying knowledge of electronic theory and components.
  • Adjust and replace defective or improperly functioning circuitry and electronics components, using hand tools and soldering iron.
  • Maintain documentation of testing and equipment operation.



 



 





 



BASIC QUALIFICATIONS:
 
  • Ability to read and interpret schematics, assembly drawings, procedure manuals, parts lists and wire data lists.
  • Knowledge of analog and digital symbol identification
  • Knowledge of test practices and procedures.
  • Personal computer skills required to configure and load software
  • Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
  • LINUX operating system experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.  


EDUCATION AND EXPERIENCE:
 
  • Associate's degree (A. A.) or equivalent in Electronic Technology or related field of study preferred.  
  • 2 years related experience and/or training; or equivalent combination of education and experience.


QUALIFIED APPLICANTS MUST MEET FOLLOWING REQUIREMENTS:
 
  • Valid State Driver’s License
  • Must be DoD Clearance Eligible


PHYSICAL ACTIVITY:
Climbing, Balancing, Stooping, Kneeling, Crouching, Crawling, Reaching, Standing, Walking, Pushing, Pulling, Lifting, Fingering, Grasping, Feeling, Hearing, Talking, and Repetitive Motions




 


 
Job Number: 1910099812
Job Location: Hunt Valley, MD
Per Diem: Yes
Duration: 12 months
Input Date: 03/18/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chris O\'Connor
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXr7QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design & Analy. Engineers - Many Needed

Description:
*Leads work with customers to develop and document complex electronic and electrical system requirements

•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.

•Leads work to test and validate to ensure system designs meet operational and functional requirements.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-OK-Elec/Systems
Job Location: Oklahoma City, OK
Rate: $74.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/25/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electrical Systems Design & Analysis Engineers

Description:
BS Engineering degree; electronic and electrical systems requirements
 
Job Location: Midwest
Input Date: 10/28/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann Mc Carthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Electrical Systems Design Engineer

Description:
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include
• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.
• Works under minimal mentorship.
 
Job Number: ESDE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

Electrical Systems Design Engineer 4 - Power Systems

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document complex electronic and electrical system requirements. Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications. Leads work to test and validate to ensure system designs meet operational and functional requirements. Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches technology advances for potential application to company business needs. Makes recommendations for technology investments.
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include

•Leads work with customers to develop and document complex electronic and electrical system requirements.
•Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
•Leads work to test and validate to ensure system designs meet operational and functional requirements.
•Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
•Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
•Researches technology advances for potential application to company business needs.
•Makes recommendations for technology investments.
•Works under minimal mentorship.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 374235
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/25/2019
Last Updated: 01/28/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical Systems Design Engineer 5

Description:
**Requires the ability to obtain Secret Clearance**

Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include
• Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
• Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
• Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
• Works with other to develop program test strategies.
• Manages performance of critical suppliers to ensure system integration and compliance with requirements.
• Conducts program independent reviews and reports results to program leadership.
• Provides critical support of fielded hardware and software over the entire product lifecycle.
• Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
• Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
• Works under consultative mentorship.

Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship
Bachelor's degree with 14 or more years' experience, Master's degreee with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: 374254
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 11/06/2019
Last Updated: 01/28/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Electrical Systems Engineer provides expertise in support of electrical/electronic systems through all phases of a project, including research, preliminary design, detailed design, development, certification, production, and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, advanced power distribution, and battery technology.
• Technology focal for motor / motor controllers
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Preparation and presentation of technical data in design reviews
• Review and approval of Qualification Test Plans, Procedures and Reports

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical / Electronic Engineering, Master’s degree preferred
• 5 or more years of aviation experience involving research, design, development and certification of electrical/electronic systems

Knowledge, Skills and Abilities:
• Knowledge of aircraft electrical power systems
• Knowledge of system modeling and analysis tools
• Knowledge of motor / motor controller theory and application
• Knowledge of FAR Part 23 or 25 regulations preferred
• Knowledge of RTCA/DO-160, RTCA/DO-178 and RTCA/DO-254 processes preferred
 
Job Number: 28-005
Job Location: Greensboro, NC
Rate: $55 - $65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 10/23/2019
Last Updated: 11/12/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician - Clearance Edwards AFB CA

Description:
166690
Job Title: Electrical Technician

Work Site Address: Palmdale, CA 93599
Job Number: 2504-1
Max Pay Rate: $32.64/hr
Start Date: 12/16/2019
End Date: 6/30/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2504-1S
Job Location: Edwards AFB, CA
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Technician - Clearance Nellis AFB NV

Description:
166689
Job Title: Electrical Technician

Work Site Address: Las Vegas, NV 89191
Job Number: 2505-1
Max Pay Rate: $32.64/hr
Start Date: 11/5/2019
End Date: 5/20/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.

Roles and Responsibilities
Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.


Skills: Category Name Required Importance Experience
Areas of Expertise F-22 No 1
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Knowledge of Complex Mechanical/Electrical Concepts Yes 1 6+ Years
Technical Skills Knowledge of Electrical Technology Yes 1 4 - 6 Years
Technical Skills Read Electrical Schematics Yes 1 4 - 6 Years

Qty 2 positions
Work location is Nellis AFB
 
Job Number: JEG-2505-1S
Job Location: Nellis AFB, NV
Rate: 32.64/hr max
Per Diem: yes
Duration: 6 months +
Input Date: 10/24/2019
Last Updated: 01/20/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Compatibility Engineers - Many Needed - Level 3 & 4

Description:
*Must have B.S. Engineering Degree
*Ability to obtain security clearance
Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
•EMI/C analysis and test
•EMSEC/TEMPEST analysis and test
•HIRF/Lightning analysis and test

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-OK- EMC
Job Location: Oklahoma City, OK
Rate: $80.00-$89.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/25/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electromagnetic Compatibility Engineers - Many Needed - Level 3 & 4

Description:
*Must have B.S. Engineering Degree
*Ability to obtain security clearance
Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
•EMI/C analysis and test
•EMSEC/TEMPEST analysis and test
•HIRF/Lightning analysis and test

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-OK- EMC
Job Location: Oklahoma City, OK
Rate: $80.00-$89.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/25/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Anal Engineers - Analog & Digital & Power Supply

Description:
*Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products
• Reviewing supplier and partner qualification data.
• Circuit Analysis/Layout/Design/Manufacturing.
• FPGA design/development/integration
• Perform Trade Studies/Modeling.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-OK-Ana/Dig
Job Location: Oklahoma City, OK
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/25/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Design & Anal Engineers - Analog & Digital & Power Supply

Description:
*Analyzes customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products
• Reviewing supplier and partner qualification data.
• Circuit Analysis/Layout/Design/Manufacturing.
• FPGA design/development/integration
• Perform Trade Studies/Modeling.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-OK-Ana/Dig
Job Location: Oklahoma City, OK
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 10/25/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electronic Digital/Analog Power Supply Analysis Engineers

Description:
FPGA design, development, integration; perform trade studies, modeling
 
Job Location: Midwest
Input Date: 10/28/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann Mc Carthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Electronic Systems Design & Analysis Engineer 3 - 374149

Description:
**Must be able to obtain a Secret Clearance**

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374149
Job Location: Hazelwood, MO
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 08/23/2019
Last Updated: 01/28/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Systems Design & Analysis Engr.

Description:
BS Engineering Degree
Ability to obtain security clearance
•Understand and apply job practices, techniques, standards, principles, theories, and concepts
•Develop, document and maintain electronic and electrical system requirements according to customer desires and contract requirements
•Develop statement-of-work and technical performance specifications
•Analyze, translate and implement requirements into system architecture, hardware and software designs and interface specifications, showing traceability throughout the product lifecycle
•Test and validate to ensure system designs meet operational and functional requirements
•Resolve product integration issues and production anomalies
•Support fielded hardware and software over the entire product lifecycle

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Electronic Sys Design & Ana
Job Location: St. Louis, MO
Rate: $74.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/04/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 09/24/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Testers (Digital, Analog and RF Assemblies)(Interim Clearance)

Description:
Candidates must be able to test and troubleshoot digital, analog and RF assemblies down to the component level.

They must:
• be proficient with the use of various test equipment like multimeters, oscilloscopes, spectrum analyzers and must be familiar with the use of schematic diagrams.
• have proven problem-solving skills.

Candidates should:
• have experience testing and troubleshooting either micro-circuit, circuit card & high-voltage power supply assemblies down to the component level.
• be capable of using a computer and operating menu driven software.
• be capable of documenting test data as defined by verbal or written instruction.
• have the ability to work independently and as part of a team, under guidance of engineers, as necessary.

Candidate must have at a minimum an Interim Security Clearance to start with the ability to obtain a Secret Clearance.

Education Requirements:
• High School Diploma or GED plus completion of a comprehensive course in Electronic Technology.
• Must have 2-5 yrs experience performing digital, analog and RF testing using automated and manual test equipment.
 
Job Number: 1910103265
Job Location: Clifton, NJ
Per Diem: split
Overtime: possible
Duration: 7 months
Start Date: ASAP
Input Date: 12/05/2019
Last Updated: 12/17/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 10/22/2018
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician - 2nd Shift - no clearance FL

Description:
166535 Job Title: Electronics Technician

Work Site Address: Clearwater, FL 34677
Job Number: 2257-1
Max Pay Rate: $26.00/hr
Start Date: 10/22/2019
End Date: 10/16/2020
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Adjusts and calibrates systems as required. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures.

Troubleshoots to the component level. Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry. Requires a strong knowledge of Solid State devices and micro-circuitry. Works in a dynamic production environment and is able to produce at a high level in support of customer schedules.

Qualifications and Education Requirements
High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.

- Radio Frequency troubleshooting experience is desired
- Must be willing to work overtime
Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards, signal generators, and RF Power Meters.

Basic Qualifications :
1 year of direct experience
Proficient in component level troubleshooting of solid state, digital, and RF circuits.
Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions.

Desired skills :
RF component level troubleshooting
Spea Flying Probe experience
ICT experience
Familiarity with Radar Systems

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Basic Computer Skills No 1 2 - 4 Years
Technical Skills Radio Frequency (RF) No 1 2 - 4 Years


Qty 3 positions

This is a 2nd Shift position.
 
Job Number: LMRMS-2257-1
Job Location: Clearwater, FL
Rate: 26/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 10/10/2019
Last Updated: 12/17/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrophysics Engineer/Scientist 4

Description:
Chipton-Ross is seeking 3 Electrophysics Engineer/Scientist 4's for openings in Oklahoma City, OK.

RESPONSIBILITIES:
The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate systems and components into higher level systems and platforms. Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts tests to validate performance of designs to requirements. Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested. Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status. Writes appropriate sections of proposals to support development of new business. Works under general direction. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

Assignments may deal with
Reviewing supplier and partner qualification data
Nuclear Hardening analysis and test
EMI/C analysis and test
EMSEC/TEMPEST analysis and test
HIRF/Lightning analysis and test
RF Co-Site analysis
Antenna Coupling analysis
Electrical Power Quality and Load analysis
Test Automation for aircraft modifications

Other job responsibilities may include:
Develops and validates requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.
Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
Develops architectures to integrate systems and components into higher level systems and platforms.
Performs trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
Defines and conducts tests to validate performance of designs to requirements.
Manages appropriate aspects of supplier and partner performance to ensure compliance to requirements.
Provides support to products throughout their lifecycle by developing root-cause analysis of anomalies and other engineering support as requested.
Supports project management by providing work statement, budget, schedule and other required inputs and by reporting project status.
Writes appropriate sections of proposals to support development of new business.
Works under general direction.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

TRAVEL: YES

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 182605
Job Location: OK City, OK
Rate: $DOE
Duration: 6 Months
Input Date: 10/23/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

Description:
**Requires the ability to obtain Secret Clearance**

Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components. Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develops architectures to integrate complex systems and components into higher level systems and platforms. Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements. Defines and conducts critical tests of various kinds to validate performance of designs to requirements. Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements. Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues. Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews. Generates major sections of proposals to support development of new business. Works under minimal direction.

Other job responsibilities may include
•Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
•Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
•Develops architectures to integrate complex systems and components into higher level systems and platforms.
•Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
•Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
•Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
•Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
•Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
•Generates major sections of proposals to support development of new business.
•Works under minimal mentorship.

OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

•Reviewing supplier and partner qualification data
•Nuclear Hardening analysis and test
•EMI/C analysis and test
•EMSEC/TEMPEST analysis and test
•HIRF/Lightning analysis and test
•RF Co-Site analysis
•Antenna Coupling analysis
•Electrical Power Quality and Load analysis
•Test Automation for aircraft modifications.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: 374234
Job Location: OK City, OK
Rate: TBD
Duration: 6 - months
Start Date: ASAP
Input Date: 10/25/2019
Last Updated: 01/28/2020
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/451-0051
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrophysics Engr/Scien 5

Description:
PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

Summary:

  • Reviewing supplier and partner qualification data.
  • Nuclear Hardening analysis and test.
  • EMI/C analysis and test.
  • EMSEC/TEMPEST analysis and test.
  • HIRF/Lightning analysis and test.
  • RF Co-Site analysis.
  • Antenna Coupling analysis.
  • Electrical Power Quality and Load analysis.
  • Test Automation for aircraft modifications.

Other job responsibilities may include:

  • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
  • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
  • Develops architectures to integrate multiple systems into higher level systems and platforms.
  • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
  • Develops new and improved modeling and simulation techniques.
  • Leads development and execution of critical tests to validate performance of designs to requirements.
  • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
  • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
  • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
  • Creates new tools to improve management of projects.
  • Leads development of major sections of large-scale proposals to support development of new business.
  • Works under consultative mentorship.

Prerequisites:
  • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
  • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • ABET is the preferred, although not required, accreditation standard.
  • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
  • Must possess good organizational, interpersonal, and problem solving skills.
  • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
  • Ability to adjust priorities to multiple demands and unanticipated events.
  • Highly motivated and must work well in a team environment.
  • The ability to communicate effectively, both verbally and in writing.

Preferred Qualifications:

  • Active U.S. Security Clearance/TS is a plus.
  • Previous experience in the defense or aerospace industry.
  • Previous experience in Electrical Effects.

 
Job Number: 1910108675
Job Location: OK City, OK
Duration: 6 months
Input Date: 11/07/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Sherine Ibusuki
Address: TIME SQUARE 660 BUILDING
660 SW 39TH ST STE 215

City, State: RENTON, WA 98057
Phone: 206/763-2840
800 Phone: 800/678-8644
Fax Phone: 206/763-3283
Email: cecjseattle@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fTJCQA2&URLSource=cjhunter

Engineer – Aircraft Structural Modification Support

Description:
PDS Tech, Inc. is seeking an Aircraft Structural Modification Support Engineer in Lexington, MA. 

Aircraft Structural Modification Support
2. Background/Need
Group 108 works to understand air defense issues, in particular, air vehicle survivability, vulnerability of U.S. Air Force (USAF) aircraft to weapons systems, electronic countermeasures, and air surveillance for homeland defense. The focus is on understanding USAF and threat air defense systems through tests and measurements. Test activities include flight, field, and laboratory testing. We operate three airplanes, all highly instrumented and numerous ground systems as needed for test efforts. We also develop new hardware for testing and prototype systems as well as for instrumenting existing sensors. Group 108 requires for one full time Engineer to support the aircraft structural modification project.
3. Position Scope/Job Functions
Candidate will be responsible for the management of a multi-year transformation of a Gulfstream IV-SP into the next Airborne Sensor Test Bed (ASTB). The project entails major airframe modifications including fuselage and wing strengthening, the integration of under wing / centerline instrumentation pods, nose and tail electromagnetic and optical sensors, a sonobuoy or dropsonde release system and major electrical/data infrastructure. Candidate will participate in overseeing vendors performing the necessary aircraft modifications and ensuring that the work is properly executed, documented and delivered on schedule. Support will also include design and conduct of a flight test program to demonstrate compliance with modifications specifications and to obtain FAA approvals for continued operations. Related work will include establishment of a configuration management program and documentation archive to support the aircraft throughout its life.
4. Skills: Required
- Direct program management experience of significant aircraft structural modifications
- Experience with sensor and or mission system integration to turbine powered aircraft
- Experience in the design and conduct of flight test programs for certification of major modifications
- Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
- Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
- Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
- Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
- Familiarity with Configuration management tools and processes
- Experience with MS Office tools (Word, PowerPoint, Excel and Project)
- Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
- Familiarity with Federal Acquisition Regulations
5. Skills: Preferred
- Experience with FAA certification of modifications designed to carry external stores on
commercial aircraft
- Experience overseeing the structural modification of GIV, GIV-SP or GV Gulfstream aircraft
desired
- Airframe and Powerplant License
- Designated Engineering Representative (DER) with a Structures and Electrical rating
- Designated Airworthiness Representative (DAR) rating is desired
- Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel
towards a common goal
6. Education/Professional Certifications
MS plus three (3) years minimum relevant experience or BS plus five (5) years minimum relevant
experience
7. Laboratory-furnished equipment and information
Office space and a Laboratory desktop computer will be supplied.
8. Place of Performance
Work will be performed at the MIT LL Flight Test Facility, Hanscom Air Force Base, Bedford, MA, Bldg
1715 location. Extensive travel to oversee modification/flight test activities at contractor facilities (US
and Canada) is required. Anticipate approximately 50% travel to vendor locations.
9. Period of Performance (PoP)
Three (3) year period of performance is required.
10. Security
All personnel must successfully pass a Commercial Background Investigation (CBI) and hold at least an
Interim Secret security clearance before receiving facility access.
Will the performance of work require access to classified information? YES
What level of clearance is required? SECRET

Education requirements:
 
  • MS plus three (3) years minimum experience in Aeronautical / Aerospace Engineering with a Structural Focus desired or BS plus five (5) years minimum experience is required.

 
Required Qualifications:
 
  • Direct program management experience of significant aircraft structural modifications
  • Experience with sensor and or mission system integration to turbine powered aircraft
  • Experience in the design and conduct of flight test programs for certification of major modifications
  • Familiarity with design and conduct of aircraft structural demonstration, stability and control, flutter, handling qualities, and performance flight tests
  • Familiarity with the requirements for and development of certification documentation, particularly Flight Manual Supplements
  • Subject Matter Expertise with 14 CFR (FAR) Part 91 repair, overhaul, maintenance and modification requirements, Supplemental Type Certificate (STC) processes, and Experimental Type Certificate approval processes
  • Working knowledge of 14 CFR (FAR) Part 25 certification requirements, particularly in the areas of damage tolerance analysis and instructions for continuing airworthiness
  • Familiarity with Configuration management tools and processes
  • Experience with MS Office tools (Word, PowerPoint, Excel and Project)
  • Ability to produce and present accurate and timely status reports and presentations both written and oral to all levels of management
  • Familiarity with Federal Acquisition Regulations
  • U.S. Citizenship required
  • Ability to obtain and maintain a security clearance

 
Desired Qualifications:
 
  • Experience with FAA certification of modifications designed to carry external stores on commercial aircraft
  • Experience overseeing the structural modification of G-IV, G-IVSP or GV Gulfstream aircraft desired

Airframe and Powerplant License

  • Designated Engineering Representative (DER) with a Structures and Electrical rating
  • Designated Airworthiness Representative (DAR) rating is desired
  • Demonstrated ability to lead a disparate team of engineers, technicians, and support personnel towards a common goal

Personnel possessing an active SECRET clearance is desired. All personnel must successfully pass a Commercial Background Investigation (CBI). In addition, they may begin with an interim clearance but must obtain and maintain a SECRET clearance.

 
 
Job Number: 1910104407
Job Location: Bedford, MA
Duration: 36 months
Input Date: 07/17/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTYtQAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician- Job 39061

Description:
We have an Excellent Contract to Potential Hire position for a Senior Engineering Technician to join a leading Company located in Middletown, RI.
**US Citizenship is required. Candidate must have the ability to obtain and maintain a Secret Security Clearance.** Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

The candidate will work within a multidisciplinary team of electrical & mechanical engineers and other technicians to support the fabrication and testing of a wide array of systems that support the Navy’s defensive weapon and vehicle systems. The candidate must be self-motivated, accountable, and present themselves professionally in front of customers and peers.

REQUIRED SKILLS:
QA testing of one’s work to assure adherence to manufacturing standards.
Layout, assembly, and wiring of control panels, wiring harnesses, and electronics chassis.
Ability to create, build, assemble, modify and/or repair prototypes with minimal direction or intervention.
Route, terminate and dress wire harness neatly.
Proficient soldering skills (through-hole, and solder-cup connectors).
Must be able to work in a team environment while completing tasks in an unsupervised and self-directed fashion.
Familiarity with electrical test equipment such as digital multi-meters DMMs to measure voltage, impedance, and verify continuity.
DESIRED SKILLS:
Knowledge in reading electrical schematics and assembly drawings.
Assist in updating electrical schematics and assembly drawings when required to document as-built configurations or propose changes.
Some computer skills including basic proficiency with Excel, and MS Word in order to document work and read wire lists.
REQUIRED QUALIFICATIONS:
Minimum 8 years of experience with panel building, cable harness fabrication, soldering, and wiring.
CLEARANCE:
Must be able to obtain clearance up to the level of SECRET.
EDUCATION:
High school diploma or equivalent required.
Some technical training such as an associate’s degree or completion of a certificate program in a technical or engineering discipline is desired.
 
Job Number: 39061
Job Location: Middletown, RI
Rate: $20-$28 hour
Per Diem: NO
Overtime: YES
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 11/12/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / RTL Hardware Engineer

Description:
*This is a full time, 1 year contract to hire position located in Nashua, NH*



We are seeking an electronic hardware engineer who will support and develop FPGA/RTL designs from design to system integration (design, test, troubleshoot) for embedded military/aerospace analog/digital/mixed signal multi-layer circuit card assemblies/applications.



Candidate duties will include RTL coding, VHDL synthetization placement and routing. For the work, Xilinx Vivado and possibly Altera, Microsemi, Lattice FPGAs will be used. Candidate will be responsible for their design, update/create the specs, and create the RTL design (from bottom up) or from a leveraged code block. Candidate will make a standalone testbench for the design to test basic functionality before handing it off the Design Verification team for detailed testing. Once complete, the designed product will go to the lab for testing and debugging.



Required:
*10 years of FPGA or ASIC digital circuit design in RTL/VHDL (RTL designers also considered)
*Experience with Source Control Tools/Bug Tracking; experience working in a lab environment
*Experience with lab Integration, debug, root cause analysis, lab tools.
*BSEE or equivalent
*Active Secret Clearance



Pluses:
*Xilinx Vivado Verilog or System Verilog
*Linux, GIT Bug Tracking tool such as GForge or JIRA
*FPGA verification and validation
*Testing of VHDL source code, DSP PCIE
*Serial interfaces (MIL-STD-1553, ARINC-429, RS422, RS485, etc), backplane buses including VME, PCI, PCIE
 
Job Number: 562
Job Location: Nashua, NH
Rate: 80.0
Per Diem: yes split
Input Date: 11/08/2019
Last Updated: 12/20/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Fabrication Specialist A

Description:
Chipton-Ross is seeking 7 Fabrication Specialist A's located in Salt Lake City, UT.

RESPONSIBILITIES:
Performs machine set-up, machining, welding set-up, welding, sheet metal fabrication and extrusion, tube bending and fabrication tasks. Performs composite lay-up, fabrication and assembly tasks. Assembles precision mechanical and electro-mechanical components. Assembles, repairs, modifies and installs various power plants and drive trains. Perform soldering on electronic and avionics products. Assembles and installs wire harnesses and avionics products. Prepares test articles, fixtures and data collection devices to perform various tests. Performs basic organic chemical conversion and paint preparation. Applies routine organic coatings for corrosion protection and appearance requirements. Works on articles of moderate complexity using established drawings and requirements.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
Full-Time/First Shift
3:30 PM - 12:00 AM
 
Job Number: 180163
Job Location: Salt Lake City, UT
Rate: $DOE
Duration: 12 Months
Input Date: 07/02/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Operations Analyst / HVAC - Clearance URGENT NC

Description:
165719 Job Title: Facility Operations Analyst

Work Site Address: Fort Bragg, NC 28303
Job Number: 1811-1
Max Pay Rate: 24.50/hr max
Desired Start Date: 12/9/2019
End Date: 6/9/2020
Position Type: Contract

****URGENT request for more resumes of qualified candidates****
*Must be a certificated HVAC technician
*No less than 5 years experience as a certified HVAC technician to be considered

Job Summary:
Performs tasks related to the overall management and operations of facilities, including energy management, material inventory, maintenance and construction. May oversee the repair, replacement or redesign of facilities, and preventive maintenance planning and scheduling. Implements the timely completion of requirements in compliance with Company programs, objectives and within established cost parameters. May monitor work performed by vendors and/or subcontractors; determines adequacy of work relative to job specifications/scope, and recommends corrective actions as required.

Servicing of customers' HVAC systems on the job site.
Ordering materials, tools and instruments
Preparing reports and maintaining records on equipment and preventive maintenance
Completing required paper work timely and accurately
Troubleshooting equipment failures both in service center and on customer locations
Installing, maintaining and repairing electronic pneumatic devices related to HVAC control
Practicing and promoting safe working conditions in accordance with OSHA, and other required regulations
Maintain chillers.
Assuring that heating, ventilation and air condition systems are operating in accordance with manufacture's specifications.
Servicing water softener and check for proper operation of hot water and steam boilers
Servicing HVAC and exhaust systems, fan blowers, including filters, lubrications, thermostats, and controls for the entire building.
Servicing all building components including all physical, structure and mechanical equipment.

Qualifications and Education Requirements
Must be a certificated HVAC technician.
Must be able to pass CRC Physical/Medical assessment.
BS+0-2 YRS

Qty 1 position needed

In need of a HVAC Technician for commercial facilities. Please ensure that the candidates are technically qualified. The candidate will be a worker (hands on) not a manager.
 
Job Number: JE-1811-1S
Job Location: Fort Bragg, NC
Rate: 24.50/hr max
Duration: 6 months
Input Date: 12/13/2019
Last Updated: 01/08/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Simulator Technician

Description:
Flight Simulator Technician to collaborate with a diverse team of technicians, engineers, and training instructors to ensure operational and reliability goals are met on a wide variety of flight simulator equipment used for training by global airlines.

Qualified Experience / Skills / Training:
• 2 years of electronics, computer science, PC repair, or network education preferred.
• Experience repairing electronic systems, aircraft avionics, computers, software programming, and/or networks preferred.
 
Job Number: 1241204
Job Location: Miami, FL
Rate: 18.00
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2019
Last Updated: 11/15/2019
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

Flight Test Instrumentation Engineer

Description:
PDS Tech, Inc is seeking a Flight Test Instrumentation Engineer for a direct position in Moses Lake, WA.
As part of a multicultural team, you will be responsible for the definition and design of the instrumentation system. Working from engineering requirements, develop procedures and drawings with limited guidance, and lead fabrication, installation, and trouble-shooting of instrumentation data acquisition systems and sensors.


Responsibilities
 
  • Negotiate system requirements with customers and select appropriate sensors and devices.
  • Design mechanical parts and wiring to accommodate sensors and devices
  • Present design in reviews and discussion
  • Create work instruction documents to support part fabrication and installation
  • Set up and operate data acquisition system.
  • Create calibration and functional check procedures.
  • Perform calibrations  and maintain records.
  • Troubleshoot system issues and disposition discrepancies.
  • Work effectively with instrumentation technician and maintenance teams
  • Support test flight briefings.
  • Support live monitoring of aircraft flights via telemetry.
  • Domestic and international travel
  • Work safely in aircraft environment

Required:
  • Bachelor degree along with a minimum of 1 year of flight test operations experience
    • -Or-
    • A minimum of 5 years of experience in flight test operations in lieu of the degree



  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to quickly learn new software and systems
  • Must be capable and comfortable working within a diverse team environment
  • Strong oral, written, and presentation communication skills

Desired: 

  • Knowledge in the use of 3D CAD tools (CATIA V5), and ability to create mechanical drawings and electrical diagrams.
  • Experience in design of instrumentation installation of sensors, wiring and equipment
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Familiarity with electronic test tools such as multi-meters, oscilloscopes, logic analyzers, etc.
  • Knowledge of flight test operations and certification requirements.
  • Working knowledge instrumentation data systems, sensors, and aviation related data busses and communications protocols


 
 
Job Number: 1910108505
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 11/05/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fSIDQA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Hardware Development Engineer (JPSS program)

Description:
The candidate will: •Perform Hardware/Electrical Engineering design, analysis and testing of electronics and RF subsystems.
•Represent Hardware Engineering in development and evaluation of system architectures, designs, and interfaces that meet system specifications.
•Prepare and present hardware specifications and design analysis in program reviews.
•Participate in Trade Studies and Vendor/Product selection.
•Participate in engineering discipline process development and deployment on programs.
•Insure organizational processes are followed and create program specific work instructions when necessary.
•Support may also include working with other organizations, coordinating common and efficient cross-factory environments (both hardware and software), tools, process, and methods.

Key responsibilities for the qualified candidate include: •Responsible for assisting in trouble shooting the Space to Ground Interface, including RF equipment and antennas
•Responsible for working with team members to resolve operational issues in an urgent manner
•Responsible to create design documentation, perform reviews with team members and vendors, and follow program and corporate process
•Responsible to work with the team to create System Operating Procedures

Required Skills:
•BS degree in Electrical Engineering specializing in RF and Communications fields
•Experience with RF/Baseband and signal processing design, development, and hardware testing
•Experience with preparing statements that convey the fundamental characteristics of the design objective, creating and presenting reports
•Experience with writing and reviewing manuals, procedures, plans, specifications, engineering drawings and notebooks
•General knowledge of communication protocols, digital signal processing, RF signal types and levels
•General knowledge of common information system (computer) hardware interfaces
•Must be proficient with Microsoft Office applications such as Word, Excel, and Power Point
•Must be familiar with Satellite Ground Station facilities and operations
•Periodic travel required to support upgrades at Ground Stations in CONUS and OCONUS
•U.S. Citizenship status is required. No clearance needed but needs to have ability to obtain a Common Access Card (CAC) to access government systems.

Desired Skills
•Experience with VHDL, FPGA design and coding, firmware and embedded software
•Experience with analyzing system parameters to ensure requirements are met using analytical tools
•Experience with MATLAB
•Experience with performing trade studies, recommending solutions and identifying potential vendors
•Experience with developing bill of material required to produce product and initiate the purchasing process and monitor progress
•Experience with collecting and reporting time and material estimates based on requirements.

Required Education
•Requires a degree in Science Technology Engineering or Math (STEM) with emphasis in RF design and a minimum of 4+ years of experience or 12 years experience in lieu of a degree
 
Job Number: 1910106380
Job Location: Aurora, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 12/26/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hardware Engineer

Description:
Hardware Engineer

Location: Driftwood, TX

12+ month contract



The primary responsibility of this engineer is the design and development of high-performance RF and microwave products. As a HW Engineer, you will be an integral part of a project team responsible for designing and developing a product from concept to release.

In addition to solid hardware engineering practices, you will be expected to be familiar with a wide variety of sophisticated test equipment, define and execute comprehensive test plans to debug and validate the performance of complicated circuits and modules, as well as develop and implement sophisticated calibration algorithms.

You will also be directly involved in setting specifications and transitioning the product from engineering to production. In this role, you will have the opportunity to develop and to implement automated test platforms, integrating both hardware and software, which are consistent with a high-mix, low-volume, high-tech, and high-quality operation.

Job Responsibilities

Specify, design, and implement complex hardware modules and sub-systems

Design and implement automated test solutions for microwave and RF Products.

Identify and resolve technical problems that often occur during development of new products.

Define and implement project plans, manage milestones, and hold required reviews to assure test system readiness for product release.

Integrate hardware and software to fully support new RF products under development.

Utilize programming skills to develop automated test using LabVIEW

Design measurement algorithms for RF products.

Review and approve product specifications and customer user documentation for the product.

Requirements

B. S. or M.S. in electrical engineering, electronics engineering.

Good understanding of computers and LabVIEW

Passion for learning about and working with test and measurement industry technologies

Strong work ethic and drive to succeed

Preferred skills:

Strong understanding of RF systems, RF measurements, electronics, computers, and high-level programming languages (LabVIEW, TestStand, C/C++, Python)

Familiarity with S-parameter measurements, power accuracy, and digital modulation standards

Knowledgeable about gain, compression, and intermodulation measurements

Sources of measurement errors

Appropriate selection of RF and microwave instrumentation

Statistical analysis of data

Experience with using RF/Microwave Test Instrumentation like Oscilloscope, DMM, Signal Generators, Spectrum Analyzers, Network Analyzers and Power Meters.

Demonstrate ability to:

Work effectively in a group development environment

Effectively diagnose technical issues and propose reasonable solutions

Problem-solve effectively - diagnose technical issues and propose reasonable solutions

Take ownership of goals, project schedules, and milestones

Listen attentively and grasp fast-paced technical conversation

Quickly learn applicable technology, systems and commercial off the shelf components

Adequate knowledge of reading schematics and data sheets for components

Strong documentation and writing skills





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 57826
Job Location: Driftwood, TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 09/18/2019
Last Updated: 11/06/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hybrid Electrical Vehicle Engineer

Description:
*This is full time, 5-6 month contract position, located in San Jose*



We are seeking a contract Electrical Engineer who will be working on Hybrid Electric military combat vehicles. Candidate will work on vehicle design and integration of electrical/electronic components, electric power (including cable design and electronic usage and communication equipment). Daily use will include lab test equipment [oscilloscopes, power analyzers, CAN bus diagnostics tools, etc.] as well as software tools like LabVIEW [test and verification].



Daily duties will be comprised of semiconductor power switching devices and isolated gate drivers, DC-DC converter and DC-AC inverter design topologies and high-power at power levels greater than 100kW and voltages greater than 500V. Candidate will be working with with magnetics design and DC/AC military specifications (commercial power standards and testing requirement also).



Required:
*7 years’ experience in design of hybrid electric vehicles (HEV), preferably military prototype design.

*Applicant must be adept at working in a lab environment, using typical lab tools.
*Experience with vehicle networking; conducting trade studies.
*Knowledge of 28V power generation/distribution/management/battery management systems.
*Experience in creating electrical block diagrams and schematics; Experience in EMI and EMC.
*Familiar with software tools such as SPICE (Simulink or Visio are acceptable) simulation tools,
*BSEE

*Must be able to travel 25% domestically, and work overtime as needed.



Pluses:
*Experience with military tracked vehicle 28V systems; AC/DC military specifications.
*Experience with high-powers >100kW and voltages greater than 500V

*Familiar with magnetics design.
 
Job Number: 033
Job Location: San Jose, CA
Rate: DOE
Per Diem: yes split
Input Date: 10/16/2019
Last Updated: 11/22/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lab Test Technician(Electrical/Electronic Equipment)

Description:
• Plans, conducts and documents complex tests on products, systems, components, materials, and manufacturing processes and technologies.
• Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies.
• Coordinates test requirements determines test methods and capabilities.
• Conducts system test preparations by guiding system integration, fabrication, modification, setup, checkout and teardown.
• Performs test article configuration control.
• Conducts complex tests, analyzes data and documents results; participates in test readiness reviews.
• Identifies and resolves test anomalies.
• Troubleshoots and resolves complex laboratory and test-related problems.
• Coordinates test laboratory activities, maintenance and repairs, and personnel training.
• Assists government agencies, safety and hazardous materials teams in the event of emergencies.
• Coaches and trains others.
• Works under minimal direction.
 
Job Number: Test_MD
Job Location: Germantown, MD
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 12/10/2019
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Program Engineer

Description:
This position has operational responsibility to the Manager, Services Engineering and functional responsibility to the Heads of Maintenance Engineering within AAECSE.

ESSENTIAL RESPONSIBILITIES:
Ensure the development and evolution of maintenance programs by respecting safety requirements and economic considerations for all existing and future programs while balancing conservative design inputs
Legacy programs (A310, A300-600, A320 Family, A330, A340, A350 and A380 )
New models and aircraft derivate (NEO, -1000, etc.)
Guaranty to meet Certification requirements and deadlines
Cope with widespread technologies
Ensure timely response to customer queries with good quality
Ensure that all deliverables (create, revise and publish) are available in due time
Cope with a steadily increase of workload by maintaining good quality
Keep close relation with Airworthiness Authorities and the maintenance engineering departments at the other sites
Provide assistance and advice to Airlines on maintenance programs and maintainability
Participate and/or chair airline/manufacturer meetings and maintenance working groups
Ensure transfer of in-service experience to the design offices for new aircraft programs/derivate
Represent company in operator meetings, and technical and international industry conferences
Provide maintenance engineering support expertise to other Customer Services divisions, as well as to other directorates (sales, marketing, certification...)
Carry out and/or manage complex technical matters with impact on safety or economic issues, without close supervision of the upper management level
Analyze and make synthesis to propose specific letters and documents for top management signature
Contribute to the establishment of a safe and cost efficient maintenance program
Ensure timely production and any (customized) evolution of MRBR/MPD in good quality
Contribute to the development engineering for new aircraft programs with maintainability requirements and verification reducing the maintenance costs
Contribute to the reduction of cost of ownership
Contribute to improve the product reliability, maturity and residual value of aircraft
Contribute to the safe operation of the fleet
Contribute to an excellent image
Travel out of the state and/or country for 1-2 weeks per occasion after initial training period.

Qualified Experience / Skills / Training:
Previous experience of MSG-3 methodology and familiarity with design and certification process advantageous. General knowledge of Continued & Continuing Airworthiness process beneficial
Able to critically analyze and challenge design data within the scope of the position
Customer service focused and able to understand customer needs and answer to their queries and demands
High interest/experience in working with extensive and highly integrated electronic data processing systems
Good coordination and relationship skills to deal with customers, partners, airworthiness authorities and other departments; a good team player
Tenacious, adaptable and flexible while being able to cope with highly demanding environment
Good presentation and communication skills
Fluent in English, both oral and written

Education / Special Qualifications:
BS in Engineering with at least 3 years of experience, preferably in customer services business (good general knowledge in the design and maintenance of cabin and cargo systems for modern civil aircraft). An advanced degree in engineering preferred.
www.hi-tecsolutions.com/jobs
 
Job Number: 1203354
Job Location: Mobile, AL
Rate: TBD
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/04/2019
Last Updated: 11/15/2019
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
City, State: MARIETTA, GA 30066-0005
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manual Assembly Operator

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Manual Assembly Operator
(US Citizenship Required*)
Bloomington, MN
2019-10130

Responsibilities:
• Perform project tasks/assignments of a more complex nature ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
• Read and interpret basic schematics and drawings.
• Follow methods, techniques, and sequence of operations in performing wiring, component installation, hand soldering, & cable harnessing on subassemblies and units.
• Integrate sub-assemblies into final hardware.
• Perform final assembly of small systems.
• Perform basic electrical tests Performs more complex rework and refurbishment of hardware and systems.
• May count and sort various product items, placing labels on packages, put manuals into binders, and form or break down boxes for the final product.
• May conduct manufacturing inspections on processing line in accordance to quality specifications.
• May be involved in packing, movement and protection of finished product.
• May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
• Perform general fabrication and marking.
• Operate less complex equipment.
• Perform basic loading and configuring of customer/standard software on customer device.
• Perform basic inspection per documentation.
• Accurately complete process paperwork and entering data into the applicable work order management system.
• Perform mixing of solvents and paints per specification.
• Support continuous improvement activities and participates in problem solving activities.
• Maintain a clean and orderly work area.
• Support safety/housekeeping standards.
• Contact are primarily within immediate work unit and direct supervisor.
• Normally follow established procedures on routine work with limited supervision, requires detailed instructions only on new assignments.

Qualifications:
• This position supports a 2nd shift work schedule.
• Clear manufacturing process skills.
• Clear knowledge of polarity and inspection criteria.
• Clear knowledge of Bills of Material (BOM).
• Clear knowledge of applicable work order tracking Management systems.
• Clear communication skills, both written and verbal.
• Ability to work in team environment.
• Clear computer skills.
• Clear knowledge of measuring equipment and math.
• Ability to use various computer software applications to analyze and manage data.
• Ability to interpret basic documents, work instruction, and schematics.
• Ability to exhibit adaptability/flexibility.
• Ability to lift a minimum of 15 pounds.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High School Diploma or equivalent plus 2 years of relevant experience.
• J Standard Certification for soldering.
Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-10130
Job Location: Bloomington, MN
Input Date: 11/04/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II ( Gilbert, AZ ) 9552871 and 9617553

Description:
Manufacturing Engineer II ( Gilbert, AZ ) 9552871 and 9617553
12 Month Contract

Pay rate: $35-40/hr W2

Sr. Manufacturing Engineer/ Sr. Electrical Engineer- Electronic Control Work Center and Circuit Test Lab
Summary/Responsibilities:
This Sr. Engineer is responsible for Leading the Manufacture and Test of Space Flight Circuit Cards and Box Level Hardware.
- The candidate should have detailed technical knowledge and experience in the manufacture and test of space flight circuit card assemblies. Must have a working knowledge of manufacturing processes and industry specifications applicable to spaceflight hardware such as NASA-Std 8739.1, NASA-Std 8739.4, and IPC J-Std. Proficient in: Polymerics (staking and conformal coat) and related materials, component lead forming, and soldering. Expert in removal and replacement of components; Chip capacitors & resistors, FPGA, Inductors, components that are thermal bonded. Be able to write clear and concise instruction for manufacturing technicians to execute the work.
- The candidate should be proficient at interpreting complex engineering drawings, schematics, diagrams, and specifications and should possess excellent technical writing skills. Experience using MES ERP system or iBase-t Solumina is strongly desired. Authoring of work plans and test instructions to support the successful testing of circuit card and box level test
- Additionally, the candidate needs to manage Program Schedules to insure on-time and on-budget product delivery. Must have experience with Integrated Master Schedules (IMS) or Integrated Cost and Schedule (ICAS). Must have experience with Earned Value Management (EVM) A successful candidate with have demonstrated ability to translate complex IMS schedules to the factory floor Engineers and Technicians.
- The candidate should be able to proactively identify, document, escalate, support, and resolve technical issues and discrepancies test failure (TF) & Non-Conforming Report (NCR) and work with teammates (Engineering, QA, Management, and Customers) towards prompt resolution on moderately challenging problems. Experience with New Product Development, concurrent engineering, and design for manufacturability best practices a plus.

Qualifications:
Bachelor's degree in: Electrical Engineering, Materials Engineering, Operations and Production Management, Industrial Engineering, Manufacturing Engineering, or related Technical degree plus 5 years minimum of related experience in the satellite industry supporting Space Flight Hardware Manufacturing. Must be able to obtain security clearance (US citizenship required).
- Candidate must possess demonstrated leadership skills, excellent interpersonal skills with excellent verbal and written communication ability.
- This position may require weekend work and extended daily hours to meet production demands. Also, occasional short term projects with travel may be required.
- Knowledge of TipQA, Windchill, MES, COGNOS, Microsoft Project, Costpoint, and CREOView preferred.
 
Job Number: 9617553
Job Location: Gilbert, AZ
Rate: 40
Per Diem: Yes
Overtime: yes
Duration: 12 Month
Start Date: ASAP
Input Date: 10/31/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim Mahaney
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

Manufacturing Planner(Electrical/Electronics)

Description:
• Plans and leads department/organization processes for developing, implementing and maintaining various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
• Develops and plans manufacturing concepts and strategies to support business objectives.
• Prepares build analyses and cost estimate reports.
• Leads integration of complex suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
• Participates in source selection to ensure manufacturing requirements are met.
• Develops complex tooling requirements based on manufacturing and engineering requirements.
• Manages tooling from initial design to end of use disposition.
• Leads investigation and resolution of complex or systemic manufacturing related issues.
• Leads teams performing producibility assessments of design concepts.
• Supports enterprise level benchmarking to incorporate best practices.
• Leads development of complex work statements and sequencing of events to support delivery commitments.
• Develops scheduling templates for use by others.
• Drafts, updates and reviews processes and procedures to support business and regulatory agency requirements.
• Develops and documents new job practices, techniques and standards.
• Works under minimal direction.
 
Job Number: MP_AZ
Job Location: Mesa, AZ
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Program Manager

Description:
** Looking for a candidate with a strong background in aerospace procurement/supply chain, project management, earned value analysis with strong people skills. Commodity focus is in machined parts and electronics. Able to travel nationally at a moments notice with ability to create and present status reports to company leadership. **

Duties:
-The Material Program Manager Specialist will be responsible for managing the performance of suppliers supporting various Programs.
-This candidate will interface with procurement and the engineering community to drive resolution of technical, schedule, and administrative material issues.
-The candidate will be responsible for effectively identifying supplier delivery issues, developing performance improvement strategies, and leading the implementation to support program needs and timely material delivery.
-This position requires frequent travel to various suppliers across the country supporting company Programs.
-This candidate will utilize their background and expertise to communicate between team members, customer counterparts, and suppliers, to provide assurance that the hardware is compliant to purchase order requirements.
-Furthermore, the candidate will be responsible for developing strategic plans to manage the performance of the supplier and integrating the aforementioned team members to successfully execute the plan.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.

60% - Manage supplier quality and delivery performance, identify delivery issues and coordinate solutions with suppliers, procurement, and engineering. Lead all reviews with suppliers.
30% - Drive corrective and preventative action activity at the supplier, and provide corrective action support to manage timely and effective issue resolution and control.
10% - Act as primary SCMM (Supply Chain/Material Management) interface for customer and management meetings at supplier locations.


Skills:
-Excellent written and oral communication skills required.
-Must be willing and able to travel on a regular basis to support supplier performance and program office delivery requirements.
-Knowledge of Supply Chain practices, procedures and MRP/ERP systems expected.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.
-This job will require extensive travel - up to 50% travel.
-Knowledge of Oracle ERP systems desired

Education:
-Requires a Bachelor's degree and ten (10) years of directly related experience or an equivalent combination of education and experience.
 
Job Number: 11266
Job Location: Redmond, WA
Rate: $50.00 - $58.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 12/09/2019
Last Updated: 01/02/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Power Supply Design Engineer

Description:
Leads analysis of customer and system requirements and development of architectural approaches and detailed specifications for various electronic products. Leads development of high-level and detailed designs consistent with requirements and specifications. Leads reviews of testing and analysis activity to assure compliance to requirements. Identifies, tracks and statuses technical performance measures to measure progress and ensure compliance with requirements. Leads activities in support of Supplier Management with make/buy recommendations and other technical services. Coordinates engineering support throughout the life-cycle of the product. Plans research projects to develop concepts for future product designs to meet projected requirements. Works under minimal direction.

Skill:Digital and Analog Circuits and Power Supply Design
 
Job Number: EDAE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 01/23/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Email: vibhas.sadhu@acsicorp.com
Website: www.acsicorp.com

Principal Electrical Engineer Design 3

Description:
Job Description:
The Ground Systems Development department is seeking Digital Test Set and FPGA developers who are familiar with development and design of digital test systems including PCB, digital drawers, and FPGA design, experience with schematic capture and Xilinx Vivado FPGA design tools, and experience with a variety of digital/analog commercial test equipment. The primary assignment is to develop test sets for space based electronics ranging in size/complexity from modules to units to subsystems.
Candidates will have effective written and verbal communication skills and must be able to clearly present technical approaches and summaries. Candidates must be able to work without appreciable direction.


Basic Qualifications:
- 5 Years with Bachelors in Science; 3 Years with Masters; 1 Years with PhD.
- Demonstrated proficiency using digital test equipment
- Demonstrated proficiency developing digital electronics
 
Job Number: x20190132
Job Location: Manhattan Beach, CA
Rate: $54/hr
Duration: 1 year
Input Date: 01/07/2020
Last Updated: 01/27/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4518 SEABOARD LN
City, State: FORT COLLINS, CO 80525
Phone: 970/282-9287
Email: woody@xpeerant.com
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician VA

Description:
166567 Job Title: Production Test Technician

Work Site Address: Manassas, VA 20110
Job Number: 2346-1
Max Pay Rate: $30.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Roles and Responsibilities
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
Typical Minimums
Associate degree in electronics or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Testing No 1
Soft Skills Communication Skills No 1
Soft Skills Multi-tasking No 1
Soft Skills Troubleshooting No 1
Software Skills Linux No 2
Software Skills MS Office No 1 1 - 2 Years
Software Skills MS Office - Intermediate Level No 3 < 1 Year Software Skills MS Windows No 1 2 - 4 Years Technical Skills Blueprint Reading No 1 Technical Skills Cisco No 2 Technical Skills Electrical Testing No 1 Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No 1 Technical Skills Tester No 1 Technical Skills User Acceptance Testing No 3 Qty 1 position
 
Job Number: LMRMS-2346-1ATO
Job Location: Manassas, VA
Rate: 30/hr max
Duration: 12 months
Input Date: 10/14/2019
Last Updated: 01/15/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Planner - no clearance SC

Description:
Job Title: Project Planner

Work Site Address: Greenville, SC 29605
Job Number: 2245-1
Max Pay Rate: $25.00/hr
Start Date: 10/22/2019
End Date: 10/23/2020
Position Type: Contract

The manager is looking for candidates with specific experience writing technical manuals and or work instructions.

The person that fills this role will be responsible for creating a work manual for building a new aircraft step by step from start to finish.

Previous aircraft experience is preferred but not required.

Requirements:
• MUST have demonstrated experience in writing technical work instructions
• Critical to have Project Planning experience (planning being writing detailed work instructions)
• Preferred to have aircraft experience (i.e. F-16, P-3, C-130, C-5, etc)


This manager is very responsive and looking to fill this role immediately.



Job Summary:
Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers.

Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.
Writes, in clear and concise language, such technical documents as aircraft work documents and work instructions related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications. Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, bulletins, manuals, or similar publications.


Skills: Category Name Required Importance Experience
Soft Skills Planning and Organizing Skills No 6
Technical Skills Ability to write technical documents and end-user documentation Yes 9
Technical Skills Demonstrate Technical and Creative Skills No 5
Technical Skills Process Planning No 7
Technical Skills Project Planning No 8
Technical Skills Technical Writing No 6


Qty 1 position
 
Job Number: JEG-2245-1
Job Location: Greenville, SC
Rate: 25/hr max
Duration: 12 months
Input Date: 11/12/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Publications Specialist

Description:
Chipton-Ross is seeking a Publications Specialist for an opening in San Diego, CA.

RESPONSIBILITIES:
Publications Specialist to work within the Publications team supporting our Energy Group and working with international publishers. Under general supervision, this position will be responsible for formatting, producing, and revising technical documents, presentations, reports, and scientific journal articles from handwritten and electronic documents requiring a strong working knowledge in MS Word and PowerPoint.
" Utilize working knowledge in the use the MS Office 'Styles' tools, ability to create new styles, and the ability to create and utilize templates.
" Determine project requirements and presents drafts of finished product to customer.
" Utilization of equations and tables.
" Conduct word-processing, document set-up, editing, proofreading, formatting, document publishing and work with subject matter experts to create high quality, technically accurate documents for scientific journals.
" Edit punctuation, spelling, grammar, and consistency of terminology for technical accuracy.
" Collaborate with international scientific editors and authors to confirm adherence to in-house and international publishers' markups and style guidelines.
" Ensure that appropriate formatting is applied to content to facilitate production and, when necessary, conversion to other formats.
" Proof graphics for integration into desktop publication programs following specific formats.
" Interface with authors and illustrators, in coordinating and preparing final drafts.
" May make minor edits in some graphics using Adobe Photoshop and Illustrator.
" Maintain electronic and physical files for all publication materials.
" Maintain production logs for tracking project scheduling, budgeting, and billing.
" Interfaces with individuals in own department, contacts within the organization, as well as external customers
" Performs other duties as assigned or required.

REQUIRED EXPERIENCE:
" Must demonstrate the ability to use a Mac computer to transcribe text, equations, tables, figures, and forms; and, have a complete understanding of applicable software such as MS Word, PowerPoint, Excel, and Adobe Photoshop, Illustrator, and AcrobatPro; as well as experience demonstrating the effective use of the software. Knowledge of LaTeX is highly desirable.
" Must possess the ability to organize, schedule, establish priorities, meet established timelines and deadlines, and coordinate multiple work phases under tight deadlines.
" Must be capable of determining the appropriate approach at the task level or, with assistance, at the project level; and, provide solutions to a variety of complex publishing/word processing problems while meeting multiple deadlines.
" Must be able to communicate and interface effectively and professionally with all levels of staff, including management; as well as authors, both native, and non-native English speaking.
" Must be able to accurately interpret and explain complex information, and respond to complex issues or situations that require evaluation and interpretation.
" Must possess an understanding of customer service practices and its importance for the success of our authors and the advancement and reputation of the Energy and Advanced Concepts DIII-D Division in the international science community.
" Must possess strong follow-up skills and be able to track work efficiently.
" Must possess the ability to work well independently, and cohesively, as part of a team.
" Able to work extended hours as required.

EDUCATION:
Accredited High School Diploma/GED and two or more years of progressive experience in desktop publishing/word processing in a commercial or government organization or a related field.

WORK HOURS:
20 hours a week
Part-Time

 
Job Number: 182121
Job Location: San Diego, CA
Rate: $DOE
Duration: 6+ Months
Input Date: 10/03/2019
Last Updated: 01/28/2020
Firm Name: CHIPTON ROSS
Attention: Rochelle Anderson
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: randerson@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer- Job ID 39064

Description:
We have an Excellent Contract position for a Senior Supplier Quality Engineer to join a leading Company located in Phoenix, AZ.

**Position requires U.S. Citizenship.**
**US Citizenship is required. Candidate must have the ability to obtain and maintain a Secret Security Clearance.** Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance.


Job Responsibilities:
We are looking for an experienced Supplier Quality Principal Engineer with experience with the manufacturing, inspection, and approval of multiple types of products intended for the Aerospace and Defense Industry.
This professional will implement tools and processes to ensure suppliers are prepared and have robust plans to deliver first-time quality to Systems Program Customers.
The selected candidate will also investigate, evaluate, resolve and prevent Quality problems by conducting audits, analyzing defect trends, leading continuous improvement projects and implementing preventive tools.
The Sr. Supplier Quality Engineer will conduct capability assessments that verify supplier qualifications, will travel to assigned suppliers, and lead multiple projects to completion.
This must be a self-starting problem solver who will utilize analytical skills to find innovative solutions to quality-related issues. Strong communication skills are required to ensure suppliers understand requirements and expectations; make progress reports and present findings.
Job Qualifications:
Bachelor’s degree in Engineering, Computer Science, Computer Engineering or related technology, and at least ten (10) years of experience.
Work Experience in a Supplier Quality Engineering role Experience in Aerospace or a Defense Electronics Prime Contract environment Working knowledge of AS9100 Quality System and AS9102B First Article Requirements and Source Inspections Experience with electrical/mechanical inspections, product test, equipment and instrumentation Direct knowledge of Manufacturing processes and supply chain logistics from raw material to finished goods including experience with Enterprise Resource Planning (ERP) system
Effective Problem Solver using Structured Problem-Solving methods and systems Effective communicator, able to express ideas clearly, directly and objectively. Practical problem solver.
Preferred:
Proficient experience Product Production Line Validation, test, equipment, instrumentation, and qualification of Mechanical and Fabricated products.
Working knowledge of PCBA/CCA inspection/test, equipment, and instrumentation (IPC-A-610 / IPC-A-600 certification desired).
Experience with product test, equipment and instrumentation, knowledge of thermal processes, welding and brazing, finishes and coatings, nondestructive testing, fabrication, composites and other common processes common in the Aerospace and Defense Industries Familiarity with APQP and PPAP and process tools such as PFMEA and Control Plan Practical experience with Lean Manufacturing and Lean Six Sigma Green / Black Belt certification from a recognized organization.
Working knowledge of the principles and the purpose of a Quality Management System.
 
Job Number: 39064
Job Location: Phoenix, AZ
Rate: $26 to $29.76
Per Diem: NO
Overtime: YES
Duration: 12 Month
Start Date: ASAP
Input Date: 11/07/2019
Last Updated: 11/12/2019
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Manufacturing Engineer

Description:
Long-term assignment for an experienced quality/manufacturing engineer with electronics components background.

Description/Function:
Assess the results of component failure analysis and coordinated corrective action with suppliers and procurement organizations.
Analyze discrepancies of incoming material and coordinated supplier corrective action.
Evaluate qualification test results and evaluate new technologies or new suppliers for existing designs. Supply guidance and/or write guidelines for the selection of standard components.
Engineering support for resolution of nonconforming materials and manufacturing processes.

Basic requirements:
A bachelor’s degree from an accredited university or college.
5-10 years of applicable experience. Preferably in the defense industry.
Must be a US Citizen with the ability to obtain a security clearance.
 
Job Location: Baltimore, MD
Rate: 60.00 - 70.00
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/25/2019
Firm Name: HEPCO INC
Attention: Tom Lee
Address: 160 PEHLE AVE STE 202
City, State: SADDLE BROOK, NJ 07663-5227
Phone: 201/843-4400
800 Phone: 800/656-0099
Fax Phone: 201/843-0025
Website: www.hepcoinc.com

RF Microwave and Hardware Subsystem Design Engineer

Description:
PDS Tech inc is seeking a Microwave and Hardware Design Engineer in Baltimore, MD

The qualified candidate will work with a diverse and talented team of engineers developing innovative and cost-effective systems that support a broad range of products and business areas across the lifecycle of a program.  Responsibilities may include development of antenna architectures, receiver / exciter architectures, requirements generation/flow down; subsystem analysis including hardware from RF to digits, performance modeling, support for performance testing, requirements verification, and more.

Experienced applicants will have at least a Bachelor’s Degree in Science or other related technical degree and have experience designing, developing and/or testing radio frequency (RF) and/or microwave antenna systems and/or related RF hardware
In addition, this candidate should have demonstrated technical ability/leadership and expertise in one or more of the following areas:

- Active electronically scanned arrays (AESAs)

- Highly integrated subsystems including antenna hardware

- Reflectors, Reflect Arrays, Digital Beam Forming

- Antenna/RF Performance Analysis

- Computational Electromagnetics, Statistics

- Antenna or Subsystem Control Design

- Antenna Measurements and Data Reduction

- Antenna range integration, test, and system integration

- Subsystem requirements (hardware and software) derivation, flow-down, and configuration

The Engineering RF Microwave Design positions require the candidates to have the ability to obtain and maintain at least a Secret Clearance per business requirements. An active Secret or higher clearance is a plus!

This is a Dual level opening, candidate will be considered at both a level 3 or 4 based upon the Basic Qualifications listed below.

Qualifications:
Basic Qualification for a Band 3:

Must have a Bachelor's Degree in Engineering or related discipline with 5 years of experience in the areas described in the job description or 3 years of experience with a Master's Degree and/or 0 years of experience with a Ph. D.

Ability to Obtain and Maintain and Active Secret Clearance.

 
 
Job Number: 1910104510
Job Location: Baltimore, MD
Duration: 6 months
Input Date: 07/25/2019
Last Updated: 01/28/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GTuwQAG&URLSource=cjhunter

Robotic Maintenance Technician

Description:
Plant 2 Maintenance Personnel Body Machining

  • Working knowledge of automated industrial machinery.

  • Basic understanding of electricity.

  • Working knowledge of hydraulic and pneumatic systems. (Repair, replace and rebuild)

  • Ability to read mechanical blueprints and schematics.

  • Basic knowledge of PLC.

  • Some experience with FANUC robots a plus.

  • Ability to replace reed switches and amplifiers.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot pumps, motors, bearings, ball screws, conveyers, blowers and repair/replace (if necessary).

  • Ability troubleshoot, install and setup Mitsubishi VFD (Variable Frequency Drives).

  • Ability to work 12-hour shifts.

  • Self-starter and team player.




Plant 4 Maintenance Personnel - Assembly


  • Basic understanding of electricity.

  • Working knowledge of automated industrial machinery.

  • Knowledge of Keyence vision and barcode reading systems.

  • Knowledge of IMAJE inkjet printing systems.

  • Knowledge of SATO label printers.

  • Knowledge of the following robot systems:

    • FANUC (6-axis) w/ vision (cameras).

    • Yamaha (Cartesian) 3-axis.

    • Toshiba (Cartesian) 3-axis.



  • Knowledge of INFICON leak detectors.

  • Knowledge of automated feeding systems.

  • Working knowledge of PLC\'s.

  • Working knowledge of electronic sliders.

  • Ability to troubleshoot complex electrical systems using voltmeters and electrical schematics.

  • Ability to troubleshoot and repair pneumatic valves and cylinders.

  • Ability to troubleshoot repair/replace reed switches and amplifiers.

  • Ability to work 12-hour shifts.

  • Self-starter and team player.


Body Machining Maintenance Technicians:

1. Basic knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Ability to troubleshoot, repair, replace, and rebuild hydraulic and pneumatic systems.



Assembly Maintenance Technicians

1. Good, working knowledge of PLC. Should not be confused when a control panel is opened. Regardless of machine specifics, should be able to identify various elements, and troubleshoot problems.

2. Ability to troubleshoot, repair, replace, and rebuild automated industrial machinery.

3. Experience troubleshooting and repairing robot systems (FANUC 6-axis with vision cameras, Yamaha Cartesian 3-axis, Toshiba Cartesian 3-axis).





Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-33220
Job Location: Dallas, TX
Rate: 30.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-12-31 00:00:00.0
Start Date: 2019-11-04 00:00:00.0
Input Date: 08/21/2019
Last Updated: 01/28/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com