Job Search Results

763 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/19 Tuesday 01:38AM Pacific Time by ContractJobHunter. )

Listings 1 - 763

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst

Description:
Location: Jupiter, FL
Rate: $60.00 - $62.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.

Skills:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
-Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education:
**Candidates must either have an Active Secret Clearance or have had a Secret clearance in the last two years **
- B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering
 
Job Number: 7854
Job Location: Savannah, GA
Rate: $60.00 - $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Thermal Fluids Analyst with active secret / ANSYS heat transfer CFD aerothermodynamics liquid rocket engine systems turbomachinery combustion devices URGENT FL

Description:
160246/7337135

Job Title: Aero Thermal Fluids Analyst
62.86/hr


Number of Positions: 3
Remaining Positions: 3
Duties: ** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Selected candidates for Jupiter, FL roles must be onboarded through one of these approved background check providers: EIS, First Advantage or Sterling / Talentwise. See attachment for specific background check onboarding requirements **


-Conduct aerothermodynamic and heat transfer design and analysis of hypersonic air-breathing propulsion systems (ramjets/scramjets) and/or liquid rocket engines.
-Develop thermal models to design and analyze cooled and un-cooled engine components.
-Develop fluid flow models using Computational Fluid Dynamics codes or other analytical tools.
-Design, test and analyze data from component rigs to supplement or validate analytical models.
-Support planning and testing of engines (ground and flight) and analyze the test data.
-Document work performed in the form of reports and briefings.
Skills: -Knowledge of aerothermodynamics and heat transfer as applied to scramjet and/or liquid rocket engine systems, including turbomachinery and combustion devices.
-High proficiency levels in ANSYS Mechanical or Workbench heat transfer analysis tools, ANSYS CFX, FLUENT or comparable CFD codes.

Education: B.S. degree or higher in Mechanical or Aerospace engineering, or equivalent engineering


Skills: Required
• ANSYS
• ACTIVE SECRET CLEARANCE

State/Province: Florida
City/Town: Jupiter
Address: 17900 Beeline Hwy


Start Date: 09/18/2017 Hours Per Week: 40.00
Est. End Date: 09/18/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7337135
Job Location: Jupiter, FL
Rate: 62.86/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / no clearance / Flight Control and Vehicle Management System skills a requirement CA

Description:
Requirement #AERO-REQ-0710
Work Location Palmdale, CA (1011 Lockheed Way)
Work Week 9/80

Needed Date 11/28/2017
End Date 11/09/2018
Number of Resources 1
No Clearance

Flight Control and Vehicle Management System skills a requirement

Title: Aeronautical Engineer

Description

Candidate will contribute to aircraft FC&VMS (Flight Controls & Vehicle Management System) design, configuration development, feasibility and risk analyses, and technology maturation plans, define, develop, analyze and coordinate FC&VMS requirements with other flight sciences disciplines including ground and flight test, reliability & maintainability, system safety, and other personnel. Develop models and simulations as needed for design and analysis. Perform trade studies and define preliminary requirements for VMS architecture components. Design mechanical and electrical/electronic interfaces to support system integration and test. Define high level software requirements and flow down requirements to procurement specifications. Tasks may also include management of selected vendors, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews

Skill/Experience/Education

Mandatory:

Hardware and software integration experience Familiarity with Flight Controls and Vehicle Management Systems Demonstrated ability coordinating with systems engineering, hardware designers and subsystems
Desired:

B.S. Degree or above in an Engineering Discipline
Several years of hardware & laboratory experience MATLAB, Simulink experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0710
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Design Engineers - Greensboro, NC

Description:
STS AeroStaff Services now offers Aerospace Mechanical Design Engineer jobs in Greensboro, North Carolina.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

The Manufacturing Engineer position provides technical support for the Design Engineering Group working in areas such as manufacturing, design, development, and testing.

Job Duties:

• Supports work specific to detail parts manufacturing and assembly operations within a manufacturing environment
• Develops documentation and procedures to ensure compliance specific to customer, and regulatory production requirements and specifications
• Interprets engineering drawings to determine requirements meet objectives
• Acts as liaison between design engineering, tooling department, machine shop, metal bond shop, composites and plastics shop, tube shop, manufacturing graphics department, quality and the production floor
• Analyzes statistical data including process capability studies, tests capability studies, and through-put rates
• Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues as required
• Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation
• Ensures completed tasks have been performed and inspected in accordance with clien standards
• Identifies and corrects all production and manufacturing issues
• Prepares assembly data sheet and updates planning data sheets
• Assist with BOM identification and control
• Prepares and monitors tool orders and first article inspection sheets
• Details and assembles methods planning and tool manufacturing planning

Education, Experience, Certification and/or Licensure:

• Bachelors' degree in Manufacturing Engineer or other related field strongly preferred
• In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college
• 3+ years’ of experience in Manufacturing Engineering
• 3+ years’ experience in aerospace industry in aerospace manufacturing

Knowledge, Skills and Abilities:

• Working knowledge of or exposure to Lean Manufacturing tools
• Ability to read and interpret engineering drawings and/or specifications requirements
• Excellent oral and written communication skills
• Excellent problem solving skills
• Ability to work in a diverse environment
• Excellent communication and presentation skills.
• Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project, and Lotus Notes)
• Ability to multitask
• Strong organizational skills

Physical Requirements:

• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors
• Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.)
• Read, hear, speak, and see with no restrictions, as required by job duties
• Comprehend and adhere to management directions and/or safety instructions with no restrictions
• Effectively communicate in Business English language
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40721
Job Location: Greensboro, NC
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Design Engineers - Mechanical Systems

Description:
Aircraft Mechanical Systems Design Engineers Needed.
Design of aircraft mechanical systems including hydraulic, fuel, ECS, and/or flight control systems.
Create 3D/2D definition.
CATIA V5.
1. Bachelor’s degree in engineering or equivalent years of work experience in lieu of formal education.
2. Mechanical Systems Design Knowledge, Skills and Abilities.
3. Ability work independently as well as in a mutli-functional team environment.
4. Working knowledge of Microsoft Office (Word, Excel, and PowerPoint).
5. Extensive working knowledge and experience with CATIA v.5.
6. Visual Basic, Matlab, Simulink, FiberSim, Determinent Assembly techniques, composite curing, and Geometric Dimensioning and Tolerance experience preferred.
7. Knowledge of principles of structural design mechanics including predicting strength and other possible structural instabilities.
8.Strong mechanical design skills for all structural components of aircraft.

The Structures Company, LLC is an AA/EOE
 
Job Location: NC
Rate: $50-$60/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Warranty Coordinators - Atlanta, GA

Description:
STS AeroStaff Services now offers Aviation Warranty Coordinator jobs in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• The TechOps Supply Chain Warranty team is seeking an experienced professional responsible for execution of aircraft, component, cabin, and engine warranty claim processes
• The successful candidate will collect information to substantiate warranty claims, and process claims to completion
• The role will also support developing improvements to the efficiency, productivity, and performance of the role
• This role will collaborate with both SCM and cross-divisional Tech Ops stakeholders
• The individual should have a minimum of 3 years’ of experience in an operations environment with a large and diverse complement of employees, and ability to work with minimal supervision and complete ownership of projects
• Practice safety conscious behaviors in all operational processes and procedures

Qualifications:

• Bachelor’s degree in Operations, Management, or Aerospace, Mechanical, Industrial Engineering or related discipline is strongly preferred; equivalent A&P License with 3 years’ airline work experience is acceptable
• Understanding of Supply Chain processes and metrics, ability to influence without authority, and work in a matrix environment is a highly preferred
• Advanced computer, analytical, organizational, written and verbal communication skills is highly preferred
• Experience in database mining in the Hyperion or equivalent environment to identify aircraft parts reliability trends is a strong plus
• Candidates with experience in data science or advanced analytics will be strongly considered
• Must be a strong team player, detail oriented, and exhibit a healthy curiosity or interest in aviation
• Candidate should demonstrate the ability to communicate effectively and structure/deliver presentations targeted toward varied audiences including company leadership
• Must be a self-starter able to work independently with limited supervision and effectively prioritize and deliver on tasks
• Only candidates with strong Microsoft Word, PowerPoint, and Excel skills will be considered for this role
• Must be performing satisfactorily in current role

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40846
Job Location: Atlanta, GA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III / Instrumentation / CREO / MODELCHECK / Harness cable electro-mechanical packaging CA

Description:
7356312
Job Title: Avionics Engineer III / Instrumentation

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills:
Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater
Previous experience with MODELCHECK preferred
Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of:
Large Assembly Management, Simplified Representations, Combination States
Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
Mechanism Design
Advanced part modeling techniques including the use of relations, analysis features, and flexible components
Experience with Creo Cabling including
Utilizing logical reference data (automated routing)
Harness flattening using Creo Harness-MFG extension
Working knowledge of Creo Schematics 2.0 desired including:
Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
Diagram creation utilizing a Central Catalog

Education:
BSME with 10 years of experience or 15 + years of equivalent experience

Skills:
Required

AVIONICS INSTRUMENTATION CREO WINDCHILL GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7356312
Job Location: Canoga Park, CA
Rate: 49/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer III/Instrumentation

Description:
Avionics Engineer III / Instrumentation
Canoga Park, CA
Rate: $45-$49


Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **




** Candidates should have experience with Creo Parametric and Creo Cabling. Experience with Creo Schematics; Windchill; and Modelcheck preferred **



-Support Electro-Mechanical Packaging of complex electrical/electronic assemblies.

-Extensive knowledge of electronic packaging design for harsh environments, with Aerospace and/or military experience.

-Experience is design of cables and harnesses for applications for Aerospace products.

-Proficiency in use of Creo PDM/Link and Windchill.

-Additional proficiency with GD&T and tolerance analysis.



Skills: •Prior experience and detailed knowledge of Windchill PDMLink 10.1 or greater ◦Previous experience with MODELCHECK preferred

•Proficiency with Creo Parametric 2.0 (or greater) with extensive knowledge of: ◦Large Assembly Management, Simplified Representations, Combination States
◦Top Down Design with Skeletons including Publish Geometry, Copy Geometry, and Shrinkwraps
◦Mechanism Design
◦Advanced part modeling techniques including the use of relations, analysis features, and flexible components

•Experience with Creo Cabling including ◦Utilizing logical reference data (automated routing)
◦Harness flattening using Creo Harness-MFG extension

•Working knowledge of Creo Schematics 2.0 desired including: ◦Block Diagram to Wiring Diagram Schematic Development (aka “BID to WID”)
◦Diagram creation utilizing a Central Catalog


Education: •BSME with 10 years of experience or 15 + years of equivalent experience
 
Job Number: 8082
Job Location: Canoga Park, CA
Rate: $45-$49
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics UT-ENG-3104MST

Description:
DESCRIPTION
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

POSITION ROLES & RESPONSIBILITIES
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

EXPERIENCE REQUIRED
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: 17-796-1819
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Safety Engineer V&V

Description:
Velocity’s client, an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s, is seeking multiple Cabin Safety Engineers. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.
Seeking contract engineers to join the team in Seattle with at least five years’ experience with cabin safety engineering, to include:
• Experience and knowledge of FDMS & Water Waste Interior Systems (OEM level preferred)
• Experience with requirements writing at aircraft/systems level
• Experience validating requirements (completeness and correctness) and developing verification matrix (plan and results)
• Familiar with requirements definition, traceability, validation and verification process.
• ARP4754A knowledge and experience
• Proficient at DOORS or similar requirement management tool.
Essential functions:
• System requirements verification and validation.
• Flight test and ground test specifications.
• Support flight test and ground test activities.
• Analyze test data and evaluate system operation.
• Prepare test reports.
Desired Qualifications:
• Experience with FAA Part 25 or Part 23 certification, flight and ground test activities.
• Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
• A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
• Ability to represent the client professionally and positively during client interactions and meetings.
• Bachelor degree in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Central Office Installer

Description:
Job Description:
• Install telecommunications equipment at customer sites.
• Equipment to install is Juniper, Cisco, Nokia
• Read, interpret, and implement job specifications.
• Run, secure, and terminate Fiber, DS3, DS1, and Power cable.
• Assemble frames, superstructure and miscellaneous hardware.
• Perform required testing of installed wiring using specifications and drawings.
• Label and stencil equipment and cabling.
• Install and connect basic AC wiring.
• Run and terminate DC power cabling.
• Experience with Stitching, Wire Lacing or Wire Wrapping
• Maintain satisfactory quality performance levels.
• Practice safe work habits.
• Timely and accurate completion of necessary operations paperwork (e.g. expense reports, time sheets, job documentation, etc.)
• Provide daily job status reports as requested.
• May be required to provide on the job training to other installation technicians.
• May be required to assume responsibility for successful completion of basic installation projects.
• Other duties as assigned.

Required Skills:
• Good manual dexterity.
• Ability to operate hand and power tools.
• Ability to read simple mechanical drawings.
• Ability to work independently and with others.
• Ability to lift up to a maximum of 25 pounds.
• Ability to climb a ladder.
• Professional appearance and manner.
• Good customer service and administrative skills.
• Ability to identify different colored wires.
• Valid driver’s license and reliable personal vehicle for travel to job sites.
• Ability to travel extensively (including overnight) both locally and nationwide.
• Own basic tools with the ability to use them as appropriate.
• Cell phone with data and unlimited talk plan.
• GPS for travel.
• Computer operation knowledge (Word, Excel, and test software).
• Ability to work day and/or night shift hours.
 
Job Number: 40638
Per Diem: Yes
Overtime: Yes
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chemical Engineer

Description:
Chemical Engineer
Location: Tulsa, OK
Duration: 12+ months
Rate: Open, DOE
Chemical Engineer Summary Statement:
Applies extensive knowledge of principles, theories and concepts related to Chemical Engineering.
Chemical Engineer Essential Functions and Key Responsibilities:
Develops solutions to a variety of problems of moderate scope and complexity.
Solves unusual problems that require moderate ingenuity and innovation related to chemical engineering, chemical formulations and manufacturing processes. Work is accomplished under general management direction. Applies extensive knowledge of chemistry and chemical engineering to design and develop transparency related aircraft products for military, executive, general aviation, or special purpose applications on operational aircraft. Researches and develops new and improved chemical manufacturing processes. Designs chemical plant equipment and devises processes for manufacturing. Determines most effective arrangement of operations such as mixing, conditioning, application, and testing of related polymer products. Develops, implements, and maintains chemical processes;calculates and organizes all data for complex process flow sheets including instrumentation and control considerations; models processes and units operations. Confers with management to ensure proper sequence of operation and prepares specifications and operating instructions for processing equipment. Services, troubleshoots, and solves engineering problems with processes or equipment already in operation. Ensures processes and procedures are in compliance with regulations.
Conducts tests and measurements throughout stages of production to determine control over such variables as temperature, density, pressure and viscosity. May function as Project Manager on large projects or significant portions of very large projects. Provides technical leadership and oversight to the assigned engineering staff. May represent the Company to current or prospective customers or vendors on technical matters related to the job assignment or technical specialty.
Chemical Engineer Ancillary Job Functions and Responsibilities:
Perform other duties as required. These duties may include assignments in job classifications other than the primary assignment.
Chemical Engineer Job Qualifications:
Formal Education, Training, Professional Certification and
Chemical Engineer Work Experience:
Experience may be substituted for the formal education and training requirements in this section at the discretion of management. Technical Bachelor level degree in Engineering or the sciences or equivalent and six(6) years related experience and /or training; or equivalent combination of education and experience.
Level of Supervision Required:
Works under general direction. Receives guidance as to results expected and to resolve complex problems. Exercises latitude in determining activities and approaches within moderate to wide parameters. Standard Job Requirements:
•Must be able to arrive at work on time, work on-site, and attend regularly.
•Must be able to read and write technically in the English language, perform appropriate mathematical calculations and learn to interpret and comprehend company policies, procedures, safety instructions, and other like documents used in an aerospace manufacturing environment.
•Competent in the use of standard software applications such as Microsoft Word and Excel and operate standard office equipment.
•Make telephone and direct personal contact with internal and external personnel and make formal presentations
Chemical Engineer
.•May perform work of lesser skilled employees.
Special Job Requirements:
Experience and working knowledge of the following:
•Polymerization and casting of liquid methyl methacrylatemonomer
•Catalysts and cross-linking agents
•Filtration of liquid monomers
•Mechanical properties testing of polymers
•Adhesion promoters and surface primers
•Polymer coating so Polysiloxane and other protective coating so Electrically-conductive coating so Optical coatings for projection screens. Special Training:
•Safety training applicable to the job and the general work area.
Physical Requirements:
While performing the duties of this job, the Stakeholder is regularly required to sit; use hands to finger, handle, or feel; and talk and hear. The Stakeholder frequently is required to move from one place to another and reach with hands and arms. The Stakeholder must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, and ability to adjust focus. Travel between facilities. Must be able to work in excess of eight (8) hours per day and five (5) days per week, if required. Must be able to ascend and descend stairs. Work Environment :Must be able to tolerate exposure to dust, fumes, noise, temperature and other elements in the shop area, if required. The noise level in the work environment is usually moderate.
Mental Requirements:
Able to work as a team member, highly organized, work well under stress and handle multiple priorities. Must possess interpersonal and communication skills to interact with other people inside and outside the company.
The Structures Company, LLC is an AA/EOE.
 
Job Location: Tulsa, OK
Rate: "open"
Per Diem: yes
Overtime: "possible"
Duration: 12+ month
Start Date: asap
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III

Description:
Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **
**Candidates should have 2 to 8 years of related work experience. No recent college graduates please**
**Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware**


Skills:
- 25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
- 25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
- 20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- 10%: Develops trade studies, design concepts, systems integration and component-level test plans.
- 10%: Supplier integration with external vendors
- 10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.


Education:
- A Bachelor's degree in Mechanical or Aerospace Engineering.
- Candidates should have 2 to 8 years of related work experience. No recent college graduates please.
 
Job Number: 7819
Job Location: Canoga Park, CA
Rate: $35.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) II/III / local preferred URGENT CA

Description:
160209/7333281

8 open positions

48/hr max

Manager is currently interviewing.

Job Title: Component Product Engineer (Project Engineer) II/III



Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** This is NOT a Designer role. Please make sure that all candidates with a Designer background or Designer expectations are aware of this. This is a Project Engineer role **



* Candidates should have 2 to 8 years of related work experience. No recent college graduates please *



Position is for a Component Product Engineer for the development, fabrication and test of rocket engine system interconnect hardware.

Skills:
25%: Development and fabrication support of rocket engine components using engineering and scientific principles.
25%: Translates engineering and scientific concepts from preliminary ideas through product life cycle.
20%: Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.
10%: Supplier integration with external vendors
10%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.

Education:
A Bachelor's degree in Mechanical or Aerospace Engineering.

Skills:
Required

PROJECT ENGINEER COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333281
Job Location: Canoga Park, CA
Rate: 48/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - DER Electro-Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Description:
UNIQUE SKILLS
Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Client ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Client ODA projects and released engineering deliverables across the G650, G550, and G450 platforms – Previous Client experience in the above noted areas and Client aircraft platforms, as well as with Client associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 17-786-116381
Job Location: Southeast
Rate: $135.00/per hour
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: AAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
DER Electro-Mechanical Systems Eng Landing Gear & Hydraulic Systems

Description:
DER Electro Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Savannah, GA
Rate: $135/HR
Long Term contract

Unique Skills:

- Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Company ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Company ODA projects and released engineering deliverables across the G650, G550, and G450 platforms - Previous Company experience in the above noted areas and Company aircraft platforms, as well as with Gulfstream associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 7930
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
Check 2D and 3D engineering data and 3D models for conformance to requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets, in accordance to Gulfstream requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
 
Job Number: 24-319
Job Location: Savannah, GA
Rate: $53/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
All candidates must have a Bachelor’s degree to apply.

RESPONSIBILITIES
• Reviews Engineering design documents consisting of drawing, engineering order and parts list for consistency with company standards, design quality, requirements and its corrective interpretation.
• Also reviews 3D models used to produce 2D design are properly associated and provide repeatability and correct representation in the Digital Aircraft Model.
• Constant Interaction with Design teams to review/discuss issues and agree on acceptable solutions

TASKS
• Check Drawing, Engineering order and parts list for adherence to company standards.
• Check 3D information in CATIA and PLM System clearly describe and annotate issues found to designer and engineering design field
• Work with design team to solve issues identified
• Consult with design team and other checkers for interpretation provide inputs to management on major issues being identified and help develop alternatives for solutions

REQUIREMENTS
• 10 plus years of experience designing mechanical and/ or structural parts, assemblies or installations for aircraft
• 7 years of experience with CATIA and PLM Systems (preferably Teamcenter)
• 5 years of experience working with GD&T
• Very familiar with aircraft production and assembly methods
• BS Mechanical or Aerospace Engineering
• Experience with Composite materials a Plus
 
Job Number: 28-016
Job Location: Greensbo, NC
Rate: $48-$60 DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement

Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis

Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: 52852
Job Location: Salt Lake City, UT
Rate: Open
Per Diem: Yes
Duration: 6 months plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Rich Nguyen
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
secret clearance

TeamCenter Engineering experience C130 Familiarity JobScope /IT reports experience

•Mechanical design and associated program deliverables on subassemblies or small self-contained systems
•Design and release drawings to meet internal and external commitments
 
Job Number: 41159
Job Location: KY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 9 mos+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Location: Independence, OH
Rate: $33.38/HR
Duration: 1 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- Design Engineer will be responsible for coordinating with the customer and developing complete Landing Gear layouts in response to customer requirements and design methodologies.
- This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program. - Manages delivery of mid to high level complexity research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- Also, will be responsible for preparing and delivering presentations to the customer as required.

Requirements:
- Bachelor's degree and 10+ years of experience and US person status is required.
- Knowledge of PDM (Smarteam, MatrixOne, Team Center) systems, Catia V5, & MS programs (Word, Excel, Project, Power Point).
 
Job Number: 8288
Job Location: Independence, OH
Rate: $33.38/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer

Independence, OH
1 Year Contract
$50.00-60.00/Hr

Summary: Reporting to the Design Lead, the successful candidate will be responsible for supporting detail design and drawing release in support of initial production. Model Based Definition (MBD) drawings shall be compatible with UTAS Landing Systems design methodologies, customer and industry/regulatory requirements and standard practices. The successful candidate will conduct trade studies, generate layouts, perform tolerance stack-ups, and detailed part design and formal drawing release.

Required Qualifications:
• BS in Mechanical or Aerospace Engineering with 8+ years of design experience with a background in mechanisms and hydraulics in aerospace field with work experience with electrical and hydraulic systems routings
• Minimum of 8 years of experience within the Aerospace industry; must include extensive experience in New Product Development of transport and / or military type aircraft components and assemblies . Knowledge of industry standard practices for systems routings. Understanding of requirements management and verification. Understanding of decomposition of system requirements and development of sub-system requirements. Understanding of qualification requirements electrical and hydraulic equipment. CATIA V5 - model based definition (FTA), kinematics, functional tolerance and annotation and drafting / interoperability. Working knowledge of Engineering PDM systems. In-depth knowledge of MS programs (Word, Excel, Project, PPT). Strong communication skills capable of engaging and working directly with suppliers. US citizen, permanent resident alien or able to review all export-controlled technical information. Experience with GD&T (ASME Y14.5) and familiar with ASME Y14.100 and Y14.41 Experience with Matrix One and SmarTeam PDM systems Working knowledge of materials and surface treatments Proficient with MS Word, Excel, and PPT
• Demonstrated ability to utilize Catia V5 with strong emphasis on functional tolerance and annotation module
• Strong interpersonal skills with demonstrated ability to maintain good working relationships with internal and external customers
• Successful candidates must meet all requirements under ITAR & CCGP
• Possess UTAS-LS Enterprise Values including Ethical Behavior, Customer Focused Improvement, Accountability & Teamwork and Openness & Trust
 
Job Number: 8266
Job Location: Indendence, OH
Rate: 50.00-60.00/Hr
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **

** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
•Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent. MS degree is desired.
 
Job Number: 8029
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred**

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T.
- Higher level certifications are preferred.
- Windchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent.
- MS degree is desired.
 
Job Number: 8028
Job Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.

Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.

Compose compliance matrix to meet customer specification requirements.

In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.

Proficiency utilizing CATIA V5 engineering design software.

Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.

Ability to guide, mentor and advise other design engineering staff.

Creativity and latitude is expected.

Participate in a variety of process improvement projects.

Able to support design reviews with timely and relevant information and understanding.

Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer NX UT

Description:
Request number: 5051
Job title: Design Engineer

Number of openings: 1
Position location: Salt Lake - UT
Employment type: Contract
OT exempt: No
Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Minimum Years of Experience: 6 years Maximum
Hourly Pay Rate: 60
Start Date: 12/04/2017
Tentative End Date: 06/04/2018

Job Description
Function: **This position is a 6-12 month contract with potential of transitioning to full time direct employment.**


Moog Space and Defense Group in Salt Lake City is looking for a Design Engineer to support our engineering team delivering highly complex electro-mechanical, mechanical, and pneumatic components and systems for flight actuation applications to our Defense Sector customers. A Design Engineer at Moog will contribute to design support of some of the most sought after missile systems in the defense industry.

Essential job functions:
• Perform conceptual design, analysis, assembly/detail drawing creation in NX, and test planning for complex control hardware used on military aircraft
• Validate conceptual problem solutions through trade studies and by applying sound engineering principles
• Perform engineering calculations related to sizing, performance, tolerance and assembly
• Participate in the evolution of conceptual design, technical project planning, detail design, and development testing throughout the program lifecycle
• Represent Moog in a manner consistent with its leading-edge technical reputation
• Create reliable designs through a comprehensive experimental development test program
• Document designs, analyses, and test results with accurate and concise reports
• Team-oriented, with the desire to participate in and contribute to a high functioning team
• Self-starter with strong analytical skills and a desire for constant improvement
Required skills:
• 6+ years of design and development engineering experience
• Proficient in current versions of NX/UG computer-aided design software, 2 years experience minimum
• Good sense of three-dimensional spatial orientation and knowledge of mechanical hardware design
• Proficient in assembly/detail drawings, GD&T, and dimensional tolerance analysis


Education:
• Bachelor’s degree in Mechanical or Aerospace Engineering or related technical field
 
Job Number: JE-5051
Job Location: Salt Lake City, UT
Rate: 60/hr max
Duration: 6-12 month contract with potential of transitioning to full time direct employment
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Controls Engineer

Description:
Manages low to medium complexity projects around the design and planning of layout for assembly and materials handling. Adaptation of low complexity machine or equipment design to factory and production conditions. Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
Manufacturing Controls Engineer Controls Engineer supports the overall manufacturing process through the ownership of PLC-related programming, troubleshooting, and support of PLC ladder logic. Responsible for the implementation of engineering changes and assisting various departments with the implementation of new tools and processes and required training.
- Support the plant in all aspects of the electrical maintenance troubleshooting using PLC and robot programming skills and a thorough understanding of the machines sequence of operations.
- Support the new equipment design reviews when required to review the status of the machine design and provide input in reference to the plant's specifications and good design practice.
- Manage the required electrical spare parts in the tool crib to ensure we can support any potential equipment failures on controls related items.
- Respond to any equipment downtime issues in plant and establish any required outside resources to assist in responding to these issues quickly.
- Train and develop the plant electricians to increase their ability to understand and troubleshoot controls related issues in the plant.
- Interface with the equipment supply base to have key resources at our suppliers to assist in equipment problem solving when required. Know who to call when.
- Manage large and small equipment improvement projects in the plant as a leader.
- Complete the capital equipment list for secondary equipment required for the program detailing the cycle time requirements.
- Write detailed engineering specifications for all the tooling and equipment required to purchase, include all relevant legislative requirements.
- Select the suppliers for capital equipment.
- Manage the capital budget for all the necessary equipment purchases.
- Ensure the completion dates for all equipment are met.
- Develop the preventative maintenance plan for the electrical section of new equipment for the production plant.
- Detail training needs for the plant for new equipment.
- Integrate with the launch teams to transfer the technology required for new programs successfully to the plant.

Education / Certifications - A Bachelor’s Degree in Electrical Engineering (or similar related degree). -

Experience / Qualifications:
- College Level Electrical Controls Technology Program
- Completion of 3 year program
- Minimum of three years as a Controls Engineer in a manufacturing facility
- Strong team work capabilities, operating in a multi-function environment to collectively improve operations and resolve related issues
- Experience in programming and troubleshooting problems with robots
- Experience in programming Allen Bradley, Siemens, and Omoron PLC’s
- Experience with assembly processes - Strong mechanical aptitude - Hands-on approach to engineering
 
Job Number: SC39937
Job Location: Florence, SC
Rate: $40.00
Per Diem: Possible
Overtime: Possible
Duration: 10 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Project Engineer

Description:
Electrical/Project Engineer

Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details:
The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance. This posting is for a project engineering position at this Company – ISR & Space Systems in Windsor Locks, CT supporting various platforms.
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements.

Education
Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry.

Responsibilities
• Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test)
• Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance
• Assist Control Account Manager with Estimate to Complete
• Coordinate activities associated with review and approval of engineering specifications and engineering drawings
• Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support Company electronic Engineering Change process.
• Coordinate, track and support the assembly and test of development hardware
• Support supplier selection and part procurement
• Provide status reports
• Support program reviews both internal and external
• Coordinate closure of action items
• Support operations to fabricate, assemble, test and qualify flight hardware
• Ensure standard work flow maps are complete
• Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice.

Skills/Experience
• Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development
• Strong project management, organizational and prioritization skills
• Ability to work independently or as part of an integrated product team
• Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders
• Ability to read and understand technical manuals, blueprints or drawings
• Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results
• Understanding Earned Value Management Basics
• Strong troubleshooting and problem solving skills
• Must understand fundamentals of Root Cause Analysis
• Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information
• Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 8278
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro-Mechanical Technicians (3 Openings)

Description:
One (1) Cable & Harness Specialist / Technician
> 3 – 5+ years extensive experience specialized in cable and harness fabrication / building; someone with heavy Wiring Harness Fabrication (Wire gauges, various types of sheathing, etc) experience.

Two (2) Electro-Mechanical Technicians (
> See “Must have Electro-Mechanical experience with:” below

Job Description:

> Assemble electrical, electronic and/or electro-mechanical assembles, subassemblies or parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, schematic, etc.) into sub-units or complete units.
> Wire electronic components, per manufacturing documentation, into sub-units or complete units
> Responsible for soldering and crimping connectors
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality and engineering standards
> Responsible for testing of all electronic assemblies
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Job Requirements:

> 5+ years’ experience in manufacturing/production environment with High School Diploma and US Citizenship required
> Must have Electro-Mechanical experience with:
o Soldering (Cup solders)
o Crimping of various terminals (Barrel, Machine, MIL-SPEC, Various ring terminals, RJ 45, BNC)
o Schematic reading and comprehension (Mechanical and Electrical)
o Measuring tools (Calipers, Multi-meters, etc.)
o Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)

Preferred Experience:

> Direct experience with Military / Government Contracts within a manufacturing environment
> Preferred Certifications (Current or Non-Current): IPC-A-610, IPC-A-620 or CIS IPC A J-STD-0001
> Experience working in a quality controlled environment

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 039_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Archbald, PA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 1 year contract
Shift: First, 9/80, OT
Travel: Possible occasional travel to customer or vendor sites
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE for a SECRET CLEARANCE – ACTIVE SECRET CLEARANCE PREFERRED**

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.

Skill/Experience/Education (Mandatory):
- C/C++ programming: (6-8 years' experience required)
-Embedded software: (6-8 years' experience required)
-Hardware/software integration: (4-5 years' experience required)
-Software documentation experience
-Software verification experience
 
Job Number: 7788
Job Location: Archbald, PA
Rate: 40-55
Per Diem: Split Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer 3

Description:
Engineer 3

Location: Savannah, GA
Pay Rate: $58/hr - $60/hr
Duration: Long Term Contract
Shift: Not specified

Unique Skills:
-The ideal candidate will perform cabin configuration engineering and will have a background in electro-mechanical design and/or integration.
-Understanding of aircraft mechanical component integration along with basic electrical integration and application is highly preferred.
-Position will generate build list configuration and certification strategy for a complete aircraft cabin interior installation.
-Knowledge of business jet cabin interiors is highly desired.

Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Five (5) yrs in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering related field preferred. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8162
Job Location: Savannah, GA
Rate: 58-60
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FAST Technician Sr.

Description:
FAST Technician Sr.
Denver, CO
Rate: DOE


Unique Skills:

*** This person will be station in the Denver, Colorado area *** Must be able to pass a DOT medical exam and meet all of the qualifications to operate large vehicles.FAA A & P Certificate, FCC license, or NCAT certification required. Valid Driver's License required. Ability to obtain Passport as international travel is a requirement. Must be available on an on-call basis 24 hours a day 7 days a week, with the ability to be on site or dispatched on the FAST aircraft or vehicle within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or standard CMP time with little or no supervision.


Education and Experience Requirements:

HS diploma/GED. FAA A & P Certificate, FCC license, or NCAT certification required. Valid Drivers License required. Ability to obtain Passport. 8 years combined experience in inspection, maintenance or servicing of large/mid-size acft to include 2 years experience on Company acft.

Position Purpose:

Independently performs a variety of aircraft modifications and maintenance functions on AOG aircraft on road trips and in the Product Support org. Duties include adv troubleshooting, removal and installations of airframes, landing gear, engine components, electrical components, control systems and any other maintenance requirements to assure conformance to procedures, performances, and test specs on customer live in-service aircraft. Supports the customer in diagnosing and resolving technical problems with the aircraft.

Principal Duties and Responsibilities:

Essential Functions: 1. Must be available on an on-call basis, with the ability to be on site or dispatched on the FAST aircraft within two hours of the initial contact from Company. Must be able to communicate effectively with the customer, scheduling, FAST flight crews, Tech Ops, business office, vendors, Warranty, Field Service Reps and Hangar Ops. Acts as the single point of contact between Company and the customer to correctly relay the aircraft schedule and return to service expectations. 2. Performs required AOG maintenance and necessary servicing of all aircraft mechanical and avionics systems. Must demonstrate the ability to work independently and consistently to perform assigned maintenance and avionics tasks within the quoted or std CMP time with little or no supervision. 3. Complies with adv troubleshooting techniques for all model aircraft with assistance from Tech Ops. 4. Orders and receives all tooling and matls needed to service the AOG aircraft. Arranges the shipment of all core units and tooling back to Company. 5. Coordinates with the Inspection Dept to ensure compliance with internal and FAA inspection and doc requirements. Acts as the delegated Quality rep when assigned on road trips. Properly completes work order sign-offs, logbook entries, shift turnovers, expense reports and all other paper work in a timely manner. Ensures that all work accomplished meets quality stds and specs. 6. Establishes and maintains a professional working relationship with the customer and provides one-on-one direct familiarization briefings with the customer during the road trip. 7. Properly identifies (tags) customer property and equipment. Stores aircraft components and other customer property securely and safely. 8. Follows SOPs and JSAs/JRAs when operating GSE, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operates and supervises use of special support equipment used in removal and installations of major components. 9. Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft. Also arranges, as needed, for the overhaul or repair of customer property and inspect/operate all interior installations and record discrepancies. 10. Provides regular updates on aircraft status and all customer support activity to Field Service Rep and management.

Additional Functions: 1. Assists in training new employees. 2. Performs other duties as assigned.

Other Requirements: 1. Formal training in the Company product line maintenance procedures and practices preferred to include Flight Safety Maintenance initial training for specific models required to support. 2. Must possess a working knowledge of the company policies and procedures, Repair Station and QC Manual, pertinent process specs, and technical reference matls. 3. Must possess a strong grasp of all aircraft avionics and mechanical systems and how they are related. Must possess the ability and understanding to comply with all system checkouts on an in-service aircraft.
 
Job Number: 8329
Job Location: Denver, CO
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Description:
Finite Element Analysis (FEA)/Finite Element Method (FEM) Mechanical Engineer - Level 3

Location: Orlando, FL
Duration: 1 year contract
Pay Rate: $65/hr - $75/hr (DOE)
Shift: 1st, 9/80
**Must have an Active Secret Clearance**


Job Description:
-Mechanical Structures / Dynamics Engineer: Perform stress analysis for flight structures and ground test support equipment’s.
-Course work and stress analysis experience must include classical hand analysis as well as finite element analysis methods.
-Job duties may encompass buckling analysis; linear and non-linear stress analysis; composite analysis and mechanism.
-Candidate should be highly skilled in finite element modeling and analysis, with expertise in the use of FEM, Nastran, NX or BETACAE preferred.
-Experience with high velocity impact analysis or flight test random vibration data reduction is a plus.
-Requires good verbal and written communication skills, and ability to work in a team environment.
-Candidate will be required to support designers in determining parts with adequate margins of safety, good load paths, low weight, and high producibility.
-Job duties may also require support to structural test definition, requirements, monitoring, data reduction, and comparison to analysis.


Mandatory Skills:
-Bachelor’s degree from and accredited college in a related discipline, or equivalent experience/combined education, with 8 years of professional experience; or 6 years’ experience with a related Master’s degree.


Desired Skills:
-Mechanical Engineering degree, FEM, NASTRAN, NX or BETCAE skills
-PRO E and/or CATIA skills
 
Job Number: 7019
Job Location: Orlando, FL
Rate: 65.00-75.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Project Engineer - Refinery Exp (TX)

Description:
THIS IS NOT FOR AN INTERN, THIS POSITION REQUIRES AT LEAST 10-15 YEARS OF EXPERIENCE.

Basic Function
An Instrument Project Engineer (IE) is responsible for the design and implementation of process instrumentation from initial conception through field installation. They are responsible for designs that provide the most reliable and cost-effective instrument systems. In addition, the IE provides consulting services to process designers in developing process design specifications, develops operating and training manuals for mechanical and process personnel and participates in training operating personnel.

An IE:
• Writes purchase and construction specifications and writes and performs Factory Acceptance Tests.
• Uses vendor software programs for sizing safety and control valves.
• Specifies, procures, and configures Programmable Logic Controllers (PLC) and field hardware such as transmitters, controllers, pneumatic and electronic transmission system.
• Utilizes standards and best practices from American Petroleum Institute (API) and International Society of Automation (ISA), National Fire Protection Association (NFPA) to perform the above functions.

Responsibilities.
The Instrument and Controls Engineer may be responsible for:
• Function as project engineer on instrumentation and capital projects and large maintenance projects.
• Taking lead role on Instrumentation and controls capital projects including PLCs.
• Help identify areas where instrumentation/controls can improve plant operations and profitability.
• Developing capital and expense budget requirements related to instrumentation system upgrades, PM/PdM programs, repairs, expansions, etc.
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment.
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA).
• Interact with Engineering and Construction contractors, both on-site and off-site.
• Leverage the application of instrumentation safety standards, mechanical integrity, design and maintenance.
• Using documentation systems and processes that maintain accurate instrumentation information and drawings.
• Support criticality assessments of the plant's instrumentation equipment.
• Design and evaluate Refinery Safety Instrumented Systems (SIS). Perform Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems.

Basic Required Qualifications.
• Must be legally authorized to work in the United States, at least 18 years of age and possess a valid driver’s license.
• Must possess a bachelor’s degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering, or Industrial Engineering.
• Must have three or more years of instrumentation experience and three or more years of direct experience in a refinery, chemical and/or manufacturing industry.
• Demonstrated knowledge and use of SPI (InTools) database and specifications.
• Proficient in the specification, troubleshooting, maintenance and overhaul of process control values.
• Demonstrated knowledge of PLC's.
• Proficient in MS office (Word, Excel, Outlook, Projects).
• Must be willing and able to perform, comply with the following:
• Wear Nomex fire retardant clothing and personal protective equipment (such as steel-toe shoes, ear, and eye protection).
• Maintain face daily so that a respirator/face mask can seal properly (some examples include being free of facial hair and/or clean shaven), climb up to 200 feet in height and work in enclosed spaces such as tanks and silos

Preferred Qualifications:
• Industry certifications (ISA)

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-021618TX
Job Location: Borger, TX
Rate: $BOE/HR
Per Diem: Possible
Overtime: Possible
Duration: 11 Months or linger
Start Date: 03/26/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laboratory Administrator

Description:
Laboratory Administrator
(Supporting the Mechanical Engineering Labs)

Location: Orlando, FL
Pay Rate: DOE ($17/hr - $23/hr)
Duration: 1 year W2 contract
Shift: First, 9/80, no OT
**MUST be a U.S. CITIZEN**

Job Description:
The position is for a laboratory administrator located within the Mechanical Engineering Labs in the Mechanical Engineering department.
The overall primary job responsibility is to work with labs and internal customers to ensure laboratory work requests are submitted properly, routed to the correct lab, and closed out and archived once the work is complete
A key job function will be to help and support the new electronic work request interface. This will require a working knowledge of Microsoft SharePoint design and administration, as well as Microsoft Access database management.
Additional job duties will include placing and tracking purchase requests, managing chemical inventories, and updating individual lab SharePoint websites.
This position is customer focused, highly visible, and will be essential in growing and modernizing lab operations. The position reports to the Test and Special Processes Lab Group Manager, under the ME Labs Senior Manager, operating as a key section of the Mechanical Engineering Directorate within Engineering and Technology.

Basic/Mandatory Qualifications:
• Excellent organizational and clerical skills.
• Familiarity with Microsoft SharePoint, SharePoint Designer, and InfoPath with the ability to become a SharePoint super user.
• Familiarity managing Microsoft Access databases with ability to learn more advanced functions.
• Capable of scheduling, de-conflicting, and coordinating multiple lab activities concurrently.
• Very proficient in computing within a Windows-based MS Office-suite centered environment for communication, scheduling, data processing, and basic data transfer.
• Demonstrated sound writing and verbal communication skills.
• Minimum of a AA degree
• Able to obtain a DoD Secret Clearance.

Desired Skills:
• Demonstrated experience creating, modifying, and managing Microsoft Access databases.
• Demonstrated experience creating, modifying, and managing Microsoft Share Point sites.
• BS degree
• Current DoD Secret clearance.
 
Job Number: 8141
Job Location: Orlando, FL
Rate: 17-23
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laser Tracker Operator

Description:
Must be US citizen in order to comply with ITAR regulations on this project

Unique Skills:
• This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must
• Ability to read/understand complex blueprints, sketches, verbal instructions and tools.
• Tooling experience and/or relevant training preferred.
• Experience with using precision 3D measurement devices to locate and assemble parts or tools.
• Must be proficient in the use of laser trackers.
• Experience with Metrolog X4 or X4V5 software preferred.
• Experience with Catia V5 software preferred.

Principle Duties and Responsibilities:
• Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes.
• Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of aircraft.
• Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures.
• Assist in developing and documenting standards for the handling and utilization of metrology equipment.
• Create standardized inspection reports through the utilization of Metrologic software.
• Study and optimize equipment performance for increased capacity and equipment efficiency.
• Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades.
• Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability.
• Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment.
• Coordinate the implementation of projects between multiple organizations.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Work to improve daily processes, and ensures all work meets customer requirements.
• Assist tool shop as needed, during periodic and conformity Inspections.
• Provide input toward the selection of metrology equipment and software.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.
 
Job Number: 24-211
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Systems Engineer

Description:
Lead System Engineer

Location: Windsor Locks, CT
Pay Rate: $75/hr
Duration: 1 year W2 contract
Shift: First, 8:00am to 5:00pm
**MUST be a U.S. CITIZEN**

Description/Comment:
An EMU Systems Engineer is a versatile professional with a base degree in Mechanical, Chemical, or Aerospace Engineering and experience in one or more disciplines such as electro-mechanical design, test, mechanical design, or analysis. Cross-functional experience is highly desired.

This Company at Windsor Locks was originally the Prime Contractor for NASA’s Extravehicular Mobility Unit and is currently responsible for the life support system (backpack) and other hardware. The EMU is a long standing system that has seen operation since 1981. As such, the ability to understand and build from previous analysis, design and fleet leader assessments is paramount. Reading engineering drawings, assessing operations and test sheets, as well as assessing data from ground and flight are all key abilities. EMU Systems Engineers are involved in assessing proposed engineering changes, making specification changes/updates, certification and recertification testing and reporting, customer interfacing for real time issues, monitoring system performance on EVA and many other related tasks, often involving customer interfacing.

Ability to perform gas and fluid analysis is important. Previous experience with High Pressure O2 is a big plus. Knowledge of the typical suite of MS products is required. Other software knowledge, including heat transfer, fluid and gas flow is a plus.

Both strong oral and written skills are required. Verbal and oral skills should be professional in character and precise. Candidates must be able to work in a small, highly scrutinized, tight knit team with the goal of crew safety as their defining characteristic.

Education/Requirements:
-Bachelors degree or higher
-Special NASA drug screen will be required post-employment
 
Job Number: 8280
Job Location: Windsor Locks, CT
Rate: 75
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MM-System Engineering DMSMS–Grade 04

Description:
EDUCATION
BS, Electrical/Mechanical Engineering
MS, Electrical/Mechanical Engineering

Experience as design/ component engineer with semiconductor industry, an electrical component engineer with an Avionics OEM (Original Equipment Manufacturer), or as a DMSMS (Diminishing Manufacturing Sources and Material Shortages)/Obsolescence Technical Engineer.

Provide design guidance to engineering/suppliers for use of preferred parts to minimize impact from DMSMS

Review new designs and propose replacement options for both electrical and mechanical component selections based on cost, volume, DMSMS, reliability, quality and availability.
Interface with equipment manufacturers and LRU suppliers to clarify parts support, availability and recommended resolutions.

Manage component lifecycle and Bill of Material grading through DMSMS forecast tool [e.g. Silicon Expert, IHS, Q-Star, etc.] to identify, forecast, and resolve obsolete component issues.
Investigate and close DMSMS issues from engineering, production, and/or fielded parts.
Identify and analyze critical parts and recommend resolutions for proactive monitoring efforts.

Develop processes and lead working group meetings to track status and action items for a given design or manufacturing issues regarding; DMSMS, failure analysis, corrective actions, and root cause analysis.
Measure and track internal metrics to ensure DMSMS processes are being followed and implemented.
 
Job Number: 17-699-1616
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinery Designer

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Exclude classifications in which incumbents predominantly perform drafting assignments.
This position may be filled from the entry level to the senior level of the job family. The position requires an Associate's degree in drafting/engineering technology or equivalent drafting experience, plus one year or more years of drafting/design experience preferred. Naval design experience is desirable.
A candidate must have a thorough knowledge of accepted design/drafting methods and concepts, and be familiar with basic engineering and design principles relating to machinery design work. The candidate for this position should be proficient in the use of 2D and 3D drafting software tools such as AutoCAD, Inventor and/or Siemens NX and have familiarity with Naval Machinery design in one or more of the following technical areas, including structural closures, Capstans, elevators, winches, hoists, hydraulics, arresting gear or other heavy mechanical components. Prior Aircraft Carrier Design experience is a plus.
Candidates must have experience with 2D and 3D CAD, Electrical Wire way designs, equipment arrangement layouts and/or cable routing experience.
 
Job Number: 7864214
Job Location: Newport News, VA
Rate: open
Per Diem: possible
Overtime: possible
Duration: 1 year
Start Date: 1/2/2018
Input Date: 11/14/2020
Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer performs technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT reworks instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Basic knowledge of Lean and/or Six Sigma principles. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. Lean Specialist certification or higher preferred.

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Location: Savanah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer 2 – Production and Fabrication

Location: Redmond, WA
Rate: $30.00 - $38.50/HR
Duration: 5 month contract

**MUST be a U.S. Citizen**

Duties:
The Production Manufacturing Engineer will be responsible for working directly with a program assigned manufacturing engineer in an integrated program team (design, quality, contracts and program), to ensure all engineering/manufacturing requirements are met within manufacturing documentation. This will require working directly with assembly/test technicians to implement processes, and look for ways to continually improve them. Create work instructions, bills of materials, routings.

Skills:
Required: Microsoft Office Suite, creation of work instructions, creation of bills of materials

Desired: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
- Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 5+ years experience and/or 7+ years applicable experience
 
Job Number: 8191
Job Location: Redmond, WA
Rate: $35.00 - $38.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (PWA and LRU Assembly) CA

Description:
13701

Title TEMP Staff Manufacturing Engineer (PWA and LRU Assembly)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Support the design (DFM), first article, production, test, and system integration of Printed Wiring Assemblies and Line Replaceable Units for all UAV platforms including Ground Control Stations (GCS). Assemblies will include surface mount as well as through hole technology and mechanical assembly.

Duties and Responsibilities •Responsible for manufacturing process development, implementation, and continuous improvement to enhance Quality / Yield, reduce Cost, and improve Productivity / Schedule. Initiate and lead lean manufacturing process improvement projects.
•Specify and implement automation equipment and processes.
•Identify and assist in addressing safety issues on the manufacturing floor.
•Support manufacturing production planning and coordination, execution and operations process development.
•Provide production support to assemblers and leads.
•Document manufacturing processes and assembly work instructions in conjunction with T&O Planning.
•Design shop aids and tooling to assist production.
•Disposition non-conforming parts, identify root cause, and implement corrective and/or preventive action to reduce scrap and rework.
•Collaborate with Design Engineering during prototype, development and first article manufacturing.
•Expertise in assembly methods and processes, including surface mount technology, through hole technology, mechanical assembly, and testing. Experience in both analog and digital technologies as well as a background with RF.
•Experience with development and deployment of manufacturing automation and remaining current with technology.
•Experience with Electrical Schematics and Circuit Diagrams; Drawings and BOMs; Assembly Instructions; Engineering Change systems; Quality systems for non-conforming parts and corrective action. Experience with Lean Manufacturing methodologies for waste reduction, e.g.: 5S, Standard Work, TAKT, Pull System, 5S, Value Stream Mapping, cell design, and manufacturing flow.
•Clearly and effectively communicate both verbally and in written form to both technical and non-technical audiences, especially regarding manufacturing processes, engineering issues and proposed changes, and quality issues and dispositions.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree.
•Experience with IPC & MIL standards, including: IPC/WHMA-A-610 and 620 , J-STD-001 – Requirements for Soldered Electrical and Electronic Assemblies, MIL-STD-1553 – Digital Time Division Command/Response Multiplex Data Bus, MIL-STD-1760 – Aircraft Electrical Interconnection System, SAE-AS39029 (MIL-C-39029)– Experience implementing capital equipment in factory environment.
•Experience with MRP systems, eg SAP or MTO/WDS. Experience with Microsoft Office Project and Visio.
•Experience with programming.
•Experience with databases, e.g. Oracle and FileMaker. Knowledge of SQL.
•Experience with process mapping and demand flow technology
•Strong background in electro-mechanical assemblies.
•Six Sigma Green Belt
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-13701
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 1

Description:
Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Duration: 1 year contract

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or to have had one with the last two (2) years**

Job Description:
- Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
- Designs arrangement of machines within plant facilities to ensure most efficient and productive layout.
- Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.
- Adapts machine or equipment design to factory and production conditions.
- May incorporate inspection and test requirements into the production plan.
- Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
- Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
- Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
- Ensures processes and procedures are in compliance with regulations.

Skill/Experience/Education
Mandatory:
- Mechanical, Electrical, Aerospace Engineering Degree.
- 1st, 2nd or 3rd shift schedules may be required.
- On-aircraft and off operations.
- In this role, the employee will review mechanical designs for ease of manufacturing and work closely with design engineering for improvements.
- The employee will use their knowledge of interpreting and reading engineering design drawings to develop fabrication routers/work instructions.
- This role will also require the employee to develop bill of materials (BOMs) based on drawing parts lists.
- The employee will work with manufacturing on issues and process improvements.
- Active Secret Security Clearance within the last 2 years.

Desired:
- Job scope experience
- Team Center Engineering experience
- Production Engineering experience
- Production Operations experience
- Mechanical Experience
- Electrical Experience
- Lean Six Sigma practices SOF CLSS contract, facility, and customer knowledge
- Ability to read and interpret engineering drawings
- Excellent verbal and written communications skills
 
Job Number: 7709
Job Location: Lexington, KY
Rate: $20.00 - $35.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Eng I
Savannah, GA
Rate: $35

Unique Skills:

Solumina and SAP experience is a plus.


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 8335
Job Location: Savannah, GA
Rate: $35
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I

Location: Savannah, GA
Rate: $35-40/HR
Duration: Long Term Contract



Unique Skills:
Experience in SAP/Solumina preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
Languages Required (in addition to English): None
 
Job Number: 8040
Job Location: Savannah, GA
Rate: $35-40/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I
Savannah, GA
Rate: $30-$35

Unique Skills:

Must be a U.S. Citizen


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 8166
Job Location: Savannah, GA
Rate: $30-$35
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Requires experience in aviation manufacturing. Requires experience in Solumina, Catia, Microsoft Office, and ERP software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8135
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
UNIQUE SKILLS
Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


POSITION PURPOSE
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. Author DRDI/DMT rework instructions to support effective corrective actions. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
4. Investigate and assist in preparing justification for equipment and facility requests.
5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for manufacturing assessments with Engineering.
6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
8. Incorporate Lean Manufacturing Methodology into existing and future processes.
9. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
10. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
11. Support all Safety, Sustainability and Ergonomic Initiatives.
12. Aid in development and maintenance of Business Continuity Plan.

ADDITIONAL FUNCTIONS
1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

OTHER REQUIREMENTS
1. Proven knowledge of Lean and/or Six Sigma principles.
2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 17-752-105442
Job Location: Southeast
Rate: $55.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:


** Looking for go-getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr.

Description:
Location: Redmond, WA
Rate: $40.00 - $47.50/HR
Duration: 5 month contract

**MUST be a U.S. Citizen**

Duties:
In this role, you will lead manufacturing activities and work with a cross-functional team of engineers, as well as program management, assembly technicians, and test personnel to ensure quality manufacture of mechanical hardware. Responsibilities include manufacturing process development/maintenance, supplier support, work instruction creation, tool design, personnel training, process ownership, and management of hardware flow through production including budget and schedule. Create work instructions, bills of materials, routings.


Skills:
Microsoft Office Suite, creation of work instructions, creation of bills of materials

Desired Skills: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 10+ years experience and/or 15+ years applicable experience
 
Job Number: 8192
Job Location: Redmond, WA
Rate: $40.00 - $47.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 2 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
- This is an individual contributor level position.
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor’s Degree
- 8-15 years’ experience desired.
- The candidate must be a US person.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 8285
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: NO
Overtime: Possible
Duration: 2 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Work with Mechanical Engineering Lead to assist in the mechanical design, engineering documentation, trade studies, and drawing release for the selected program.
- Verify tolerance analysis on system components has been performed.
- Work with Designer's to ensure the design meets all requirements including Safety of Flight (SOF).
- Additionally, the checker will work with the Liaison Engineer to ensure the work flows in PLM are properly maintained.
- Work closely with Mechanical Engineering to support all program objectives.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last 2 years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- Experience with all aspects of mechanical design, including layout, documentation and checking (per IAW ASME Y14.24) and be familiar with MIL-T-3100 and MIL-STD-100.
- Five (5) to ten (10) years experience of creating Pro-E / CATIA drawing and drawing release.
- Proficiency with Pro-E / Windchill is required.
- Knowledge of LMC drawing release procedures is desired.
- Good knowledge of all aspects of Mechanical engineering is essential.
- Previous LMC experience is a plus.
 
Job Number: 7845
Job Location: Orlando, FL
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Location: Dallas, TX / Grand Prairie, TX
Rate: $60.00 - $65.00/HR
Duration: 1 year contract
Shift: 1st Shift


**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last two (2) years**


Job Description:
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- The candidate will work and support the lead design engineer to conduct integration activities, impact to the system, required sub-system/component modifications, and impacts to system performance studies.
- Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
- Tasks will include conceptual and detail design of missile integration concept components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with missile to aircraft integration concepts, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably (but not required) within the last 5 years.
- Clearance status on resume required.


Skill/Experience/Education
Mandatory: (MUST BE SHOWN ON RESUME)
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 7915
Job Location: Savannah, GA
Rate: $60.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Modeler/Drafter

Description:
Mechanical Design Modeler/Drafter

Location: Denver, CO
Rate: DOE
Duration: 1 year contract

Work Description:
- 5+ years’ experience
- Must be fluent with mechanical design utilizing CREO
- Strong at generate engineering drawings
- Proficient at modeling structural and mechanical system
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Experience with GD&T a plus
- Familiar with welding process a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8169
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
No clearance - must be a US Citizen

Mechanical Design Engineer to support the Tactical Missiles or Air Missile Defense Line of Business Area Development or Production Program Mechanical Design effort. For development program efforts, the candidate will perform conceptual and detail design of hardware system and subsystem components, create/release drawings, support design reviews, and support supplier/customer meetings. The engineer must be proficient in Pro-E/CREO; have good communication skills, and be able to work with internal and external customers. Tasks assigned may include generation of Interface Control Drawings (ICD), generation of Instructional Engineering Release (IER), creation of solid models and drawings, and performing tolerance analyses.
 
Job Number: 41177
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Entry Level

Description:
Job Title: Mechanical Engineer I
Location: Portland, OR 97217
Duration: 24 Months
Job Functions:
• The main function of this role is to provide a technical interface between Product Engineering and the Manufacturing Development Center.
• Position at MDC is at center of campus and get to work on all new designs 3-5 years ahead of production. Can also get to see the products get physically built and designs evolve. The work feeds directly into making these things more “manfucturable” and profitable. Work is enjoyable because you get to work with different groups in order to complete the projects at hand. Will also gain multiple perspectives and how it impacts different areas within the Organization. Good exposure to the company.

Essential Duties and Responsibilities:
• Interface with Product Engineering on designs for new Product Projects:
 Secure emerging design information from Product Engineering
 Understand difference between B/C/D sample level designs
 Ensure compatible maturity levels of parts used in Mockup / PoD
• Procure parts and assemblies required for Mockup / PoD:
 Provide data to suppliers for rapid prototypes
 Provide guidance to MDC Technicians procuring / fabricating prototype parts
• Problem Solving
 Assist MDC Technicians with problem identification, documentation, and resolution related to new product projects

Required background experience and skills:
• BS degree in electrical, mechanical, or manufacturing engineering, or commensurate work experience.
• 0-2 years of experience in product engineering design areas required.
• Creativity, verbal and written communication skills, analytical and problem solving ability.
• Team player and detail oriented.
• Ability to read engineering drawings and common computations.
• Siemens NX experience preferred, but CAD experience is okay.
 
Job Number: 4462
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 24 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Selected candidate will perform all Liaison duties for the program.
- Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. - Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- CAD expertise per job description (Windchill, CREO and Catia).
- Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.
 
Job Number: 7844
Job Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 3

Description:
Mechanical Engineer - Level 3 (ACTIVE DoD SECRET CLEARANCE REQUIRED)

Location: Lexington, KY
Pay Rate: DOE ($35/hr - $45/hr)
Duration: 9 month W2 contract
Shift: First, 5/40, OT
**MUST be a U.S. CITIZEN**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description
The position will require the individual to hold a major contributing role within the overall Engineering organization; as such they will be expected to prepare and present materials for peer reviews, design reviews, DFM discussion, and group discussions on technical aspects of the design.
The Engineer will be expected to lead the design effort for system sub-assemblies or potentially for small self-contained systems. The designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards.
The individual will be expected to work cross functionally within the Engineering organization as well as across the company. Ongoing job responsibilities include:
• Designs components and assemblies using commodities including sheet metal & machined components
• Provides technical experience for design and manufacturing related matters
• Mechanical design and associated program deliverables on subassemblies or small self-contained systems
• Design and release drawings to meet internal and external commitments.
• Updates on project progress and roadblocks.
• Provide input to System Engineer for design specifications for components, assembled parts and equipment for design validation.
• Demonstrate manufacturing feasibility and technical justification for selected design approach
• Support product lifecycle management ushering a product from concept through production implementation.

Skill/Experience/Education (Mandatory):
ACTIVE DoD SECRET CLEARANCE
CATIA V5 – (4+ years required)
MS Office Suite expertise – (4+ years required)

Desired:
TeamCenter Engineering experience
C130 Familiarity
JobScope /IT reports experience
 
Job Number: 8326
Job Location: Lexington, KY
Rate: 35.00-45.00
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer and 2D/3D Checking Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have mechanical engineering and 2D/3D checking experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Seats - Galley - Lavs - LRU installations - Liners - Water System - Waste System - Mechanism design and validation - Prototype development Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-723-102180
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer with active Secret Clearance / Catia V5 CA

Description:
160781

Requirement#AERO-REQ-0722
Work LocationPalmdale, CA
Work Week9/80-A
PriorityHigh
Needed Date01/02/2018
End Date12/21/2018
Number of Resources1
Security Clearance Secret (Prime Contract:re-investigation within the past 5 years (P-29 )

Title Mechanical Engineer-N
Description
This position is for a mechanism and landing gear design engineer. A successful candidate will have a complete understanding of the principles and techniques of aircraft mechanisms, landing gear and structural design. The candidate will coordinate efforts across a wide range of functional organizations, such as Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing. Responsibilities for this position include: • Create and maintain 3-D CATIA models, assemblies and installations, system requirements, interface/supplier control drawings, performance specifications, system checkout procedures and statements of work. • Create system requirements, trade studies, sub-component and flight test plans. • Coordinate with suppliers, internal and external integrated product teams. • Provide manufacturing, component test and ground/flight test support. • May function in a project leadership role managing the system performance, budget and schedule. Must be a US Citizen. This position is located at a facility that requires special access.
Skill/Experience/Education
Mandatory:

• Must have a secret clearance with an investigation within the last 5 years to start. • Proficient with CATIA V5. • Experience in mechanism design • Experience in structural design
Desired:

• Bachelor’s Degree in an Engineering Discipline with 5 years of experience or Master's Degree in an Engineering Discipline with 3 years of experience Experience with GD&T (Geometric Dimensioning and Tolerancing)
• Experience with hand stress analysis
• Excellent writing and communication skills

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Catia V5 Proficient 4-5 Years Yes
Structural Design Proficient with aircraft structural design of composite and metallic part 4-5 Years Yes


Interview RequiredYes

Shift1st Shift

OT AllowedYes (#hours allowed: 20, Pre-Approval Reqd.:Yes)
TravelNo
Exempt/Non-ExemptNon-Exempt
Rate TypePer Hour
Rates
0-4 YrsPay Rate: 65.00 USD
5-8 YrsPay Rate: 70.00 USD
9+ YrsPay Rate: 75.00 USD
 
Job Number: JE-0722
Job Location: Palmdale, CA
Rate: 65-75hr DOE
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Ground Support Equipment Designer

Description:
Mechanical Ground Support Equipment Designer

Location: 1 in Denver, CO
Location: 2 in Decatur AL
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: First, exempt OT
**MUST be a U.S. CITIZEN**

Work Description:
- Bachelor's degree or higher required
- 5-10+ years’ experience required
--- Must be fluent with mechanical design utilizing CREO, required
--- Strong at generate engineering drawings, required
--- Proficient with structural design and mechanisms, required
--- Must be familiar with basic fluid system components such as hoses, tubing, pipe routing and fluid system hardware, required
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Familiar with welding process
- Experience with GD&T a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8361
Job Location: Decatur, AL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Ground Support Equipment Designer

Description:
Mechanical Ground Support Equipment Designer

Location: Denver, CO
Pay Rate: DOE
Duration: 1 year W2 contract
Shift: First, exempt OT
**MUST be a U.S. CITIZEN**

Work Description:
- Bachelor's degree or higher required
- 5-10+ years’ experience required
--- Must be fluent with mechanical design utilizing CREO, required
--- Strong at generate engineering drawings, required
--- Proficient with structural design and mechanisms, required
--- Must be familiar with basic fluid system components such as hoses, tubing, pipe routing and fluid system hardware, required
- Knowledge of machine shop practices, capabilities, accuracies and limitations
- Familiar with welding process
- Experience with GD&T a plus
- Knowledge of Siemens Team Center design release process a plus
 
Job Number: 8167
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 3

Description:
Mechanical System Design & Analysis Engineer 3

Location: Ridley Park, PA
Duration: 12 months

Skill Code: 62D-Hydraulic Sys, Actuation & Cnt

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally, Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally, Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Education Requirement is Mandatory.

Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

For client, IF within an Engineer Job Code, Title: engineer, client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or relayed discipline. Job Req may be more specific. (read job req for clarification)

IF INTERESTED THEN PLEASE SHARE UPDATED RESUME AT RAVI@ICONMA.COM
 
Job Number: 17-20052
Job Location: Ridley Park,, PA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer 3

Description:
Mechanical System Design & Analysis Engineer 3
 
Location: Ridley Park, PA
Duration: 1 year
 
Job Description:        
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally. Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements. Additionally. Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.
 
Skill Code:
686-Envir Control & Thermal Analys
 
Education / Experience:         
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Description:
Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.
 
Education/Experience:
Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation
'Thermal Analysis experience including hand calculation and software required. Thermal Desktop and/or JENA experience preferred.” 
Supplier due diligence required - Refer to supplier guidelines concerning education requirements ENG reqs on Supplier sharepoint
 
Education requirements: Client will require a minimum of a BS in either Mechanical Engineering, Civil Engineering or Aero/Astronautically Engineering or related discipline.
 
If interested then please share updated resume at ravi@iconma.com
 
Job Number: 17-20172
Job Location: Ridley Park,, PA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer III - (PA)

Description:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally...Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard. Education Requirement is Mandatory.
 
Job Number: MechEngIIIPA
Job Location: Ridley Park, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical System Design & Analysis Engineer IV - (MO) - Unigraphics

Description:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others. UNIGRAPHICS NX

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

ACS Group (formerly 'Comforce')
 
Job Number: MechEngMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer III - MO

Description:
SEVERAL OPENINGS IN THE ST. LOUIS, MO AREA

Active Secret Clearance, NOT REQUIRED to start.

Perform independently Air Vehicle Systems engineering tasks to sustain the fielded tactical weapons systems.
Design and apply engineering principles to mechanical systems and/or propulsion engineering.
Conduct retrofit/redesigns, system integration, and system troubleshooting for multiple hardware / software subsystems.
Perform product investigations on the fielded subsystems, completing failure/trend analysis on system hardware / software, and supporting qualification / fielding of product redesigns.
Interface directly with supplier and customer to communicate results of analysis and support issue resolution.
Work under general guidance of senior engineering and management to develop recommendations on improvements to the fielded systems / subsystems.
Work cross-functionally on a wide variety of technical issues.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

CATIA V5, Enovia
 
Job Number: MechEngMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineers 3

Description:
Seeking Mechanical Systems Design & Analysis Engineers 3


Description:
Chipton-Ross is seeking 2 Mechanical Systems Design & Analysis Engineers 3 located in Ridley Park, PA

RESPONSIBILITIES:
Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design. Supports the development, maintenance or modification of system, component and installation designs/proposals to provide design documentation to downstream groups. Performs and documents analyses to validate and verify systems and components meet requirements and specifications. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others. Works under general direction. Additionally...Develops, integrates and documents mechanical and fluid system and thermal environment requirements to establish the system design. Develops, maintains, or modifies mechanical and fluid system, component and installation designs, using 3-D Computer Aided Engineering tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Performs, integrates and documents mechanical, fluid and thermal analyses and test results to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Develops new design/analysis processes and tools to improve effectiveness, quality and efficiency of the development effort. Investigates emerging technologies to develop concepts for future product designs to meet projected requirements.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Additionally...Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM
 
Job Number: 166633
Job Location: Ridley Park, PA
Rate: $57.75/hr
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Designer

Description:
Design Engineer responsible to support the conceptual design and production engineering of Aircraft Mechanical Systems. The candidate will be responsible for conceptual definition, detailed design and 2D drafting of new and modified design.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solutions.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
5. Implement design solutions optimized for cost and weight.
6. Manages task execution to ensure on-time and on-target completion.
7. Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final assembly and installation requirements.
8. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
9. Searches for problem root cause and develop corrective action plans and solutions.
10. Participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:
1. BS in Mechanical Engineering with 0-10 years directly related experience
a. OR MS / MBA with 0-5 years of experience
2. Some Travel will be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Functional knowledge of drafting rules.
3. Functional knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Familiar with FAR Part 23 or Part 25.
 
Job Number: 28-012
Job Location: Greensboro, NC
Rate: $38 to $62
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems MRB Engineer

Description:
Unique Skills:
Ideal candidate will have previous experience with Engineering MRB, trouble shooting, disposition and repair of aircraft defects, return to service requirements, and/or flight squawk support, while working in an environment like a Production Facility, Flight Test, a Service Center, or Outside Operational Support. Systems design and/or qualification experience is a plus. A skilled Mechanical Systems Engineer that is familiar with aircraft systems (including but not limited to): Landing Gear, Power Plant/ECS, Hydraulics, Flight Controls, Doors, Waste & Water, O2, Equipment installation, Secondary Structure.

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-143
Job Location: Savanah, GA
Rate: $59 - $62
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Technician

Description:
From the Hiring Manager:

* 5+ years’ experience in a manufacturing environment; government / military / defense background with vehicle mechanic and/or R&D experience preferred.
* Looking for a highly motivated individual able to get a task and complete it to the finish.
* Should have Research and Development (R&D) and fabrication experience.
* Fabrication = taking measurements & laying-out hole patterns & then drill or cut.
* Must have Mechanical experience with:
> Various types of drilling (through-hole, match, countersink, counter bore & step drilling)
> Schematic / Blueprint reading and comprehension (Mechanical)
> Measuring tools (Calipers, Tape Measure, Feeler gauge, etc.)
> Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)
* Mathematical conversions (Decimal to Fraction)
* Working understanding of engines and vehicle mechanics

Job Description:

> Assemble mechanical parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, travelers, etc.) into sub-units or complete units.
> Complete small wiring terminations as needed during mechanical assembly
> Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework.
> Works closely with engineering on new prototype projects
> Fabricates brackets, jigs, fixtures, and misc. metal work in support of projects
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality & engineering standards
> Keep work area clean and organized as to present a professional work environment
> Complete any other work related task as directed by supervisor

Preferred Certifications:

* ASE (Automotive Service Excellence)
* HVAC
* Working understanding of hydraulic pumps and cylinders


Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: (508) 230 – 5030 x123
 
Job Number: 034_2017
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes/Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Drafting Engineer

Description:
Mechanical/Drafter Engineer

Denver, CO
1 Year Contract
$45.00-55.00/Hr

1st Shift

• Mechanical Engineer / Drafter to support the design of the Mobile Launch Platform.
• Proficient in CREO version 2.0 modeling and drafting.
• 5+ Years’ Experience
• Beneficial to have knowledge in AutoCAD
 
Job Number: 7972
Job Location: Denver, CO
Rate: 45.00-55.00/Hr
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Metrology Engineer II

Savannah, GA
Long Term Contract
Pay Rate: DOE

Unique Skills:

Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***


Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions:
1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.

Languages Required (in addition to English): No Selection
 
Job Number: 8148
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV (Propulsion)

Description:
Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
- Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
- Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
- Perform propulsion system to airframe and test article to test facility integration.
- Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
- Performs design calculations to validate design requirements.
- Provides data in support of contract data requirements list (CDRL) submittals.
- Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
- Participates as a member of a project team.
- Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
- Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
- Work is reviewed upon completion for adequacy in meeting objectives.
- Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Prior propulsion to airframe and test facility integration experience desired.
- Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
- Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
- Position requires experience using CAD database management tools (WindChill preferred).
- Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
- Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
- Knowledge of manufacturing techniques and inspection requirements is a plus.

Education:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Bachelor’s or Master’s degree in an appropriate discipline and nine (9) years of related technical experience as engineering designer or equivalent combination of education and experience.
 
Job Number: 7961
Job Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX NC Programmer

Description:
5 Axis NC Programmer (NX / Unigraphics)

Purpose/ Summary

Provide robust CNC programs to facilitate the manufacture of Turbine Engine components.

Essential Duties and Responsibilities include the following. Other duties may be assigned.

Document all of the set-up information.

Review the fixturing.

Provide support for fixture design as required.

Evaluate the new cutting tools.

Analyze drawings, sketches and design data of the parts to determine the dimension and configuration of the cuts.

Select the appropriate tools and machine speeds and feed rates according to the machine shop processes, part specifications and machine capabilities.

Write the instruction sheets and cutter lists to guide set-up and operation of the machine.

Optimize the existing programs.

Possess a thorough understanding of the quality control procedures.

Ensures that the quality control standards are maintained.

Maintain production schedules from the prototype run to production.

Provide shop floor support for the life of the program.

Other duties may be assigned as necessary.

Supervisory Responsibilities:

The job has no supervisory responsibilities.

Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION and/or EXPERIENCE:

Two Year Technical Degree and a minimum of five (5) years of related experience. Unigraphics or Surfcam experience required. Experience in the use of CNC equipment, both programming and operation.

MATHEMATICAL SKILLS:

Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals

REASONING ABILITY:

Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram forms.
Ability to deal with problems involving several concrete variables in standardized situations.

WORK ENVIRONMENT:

The characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee may be exposed to moving mechanical parts, electrical equipment, acetone, alcohol, argon, braze alloys, nitrogen, hydrogen, oil based lubricants and cleaning solutions.

The employee is occasionally exposed to moderate cold and extreme heat.

The noise level in the work environment is usually middling.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to sit and use hands to finger, handle, or feel.

The employee is frequently required to talk or hear.

The employee is occasionally required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl.

The employee must occasionally lift and/or move up to 10 pounds.

Specific vision abilities required by this job include close vision and color vision.

Acknowledgements The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor
 
Job Number: 39926
Job Location: CT
Rate: open
Per Diem: direct hire
Overtime: no
Duration: permanent
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control (N/C) Programmer - Level 2

Description:
Numerical Control (N/C) Programmer - Level 2

Location: Owego, NY
Pay Rate: DOE
Duration: 8 month contract
Shift: First, 9/80, no OT
**MUST be a U.S. CITIZEN**

Description
-Self-motivated individual looking for a challenging career within the Company RMS machining center in Owego NY.
-Individual should be capable of generating, compiling, and debugging CNC programs for both vertical and horizontal machines.
-Individual will develop flow charts and diagrams outlining process steps in operation;
develops and revises program code;
prepares documentation of program development, modifications and operating instructions;
conducts program tests and makes modifications to code as needed;
and may be required to analyze system capabilities to resolve input/output problems.
-Candidate will be expected to be able to work well in group settings including design, engineering, and manufacturing personnel.

Skill/Experience/Education (Mandatory):
The following items MUST be clearly demonstrated on the resume:
• Prior CNC programming experience in MasterCAM
• Understanding of GD&T
• Ability to translate requirements from prints and drawings into work instructions and work processed
• Previous Manufacturing support roles mechanical and assembly level builds.
 
Job Number: 7720
Job Location: Owego, NY
Rate: DOE
Per Diem: Split Possible
Overtime: No
Duration: 8 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PRO/E Designer / Technical Designer V - (AL)

Description:
SEVERAL OPENINGS IN HUNTSVILLE, AL

Provides advice and technical guidance on all aspects of mechanical and structural design. Coordinates the integration of design parts, plans and tools to support manufacturing. Guides incorporation of new design technology into the development of a final product. Oversees the development/validation of statements of work to ensure completeness and accuracy of the statements. Leads the integration of product definition data requirements across internal and external business partners to deliver a functional end-product. Analyzes and resolves unusually complex design and manufacturing problems to improve engineering and manufacturing processes. Oversees the validation of technical data. Oversees the development, introduction, validation and maintenance of processes and procedures across major programs. Leads integrated engineering meetings to resolve complex problems and document solutions related to processes and procedures. AA degree. Pro/E

ACS Group (formerly 'Comforce')
 
Job Number: TechDesVAL
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PTC-CREO Expert – Aerospace - Contract

Description:
PTC-CREO Expert – Aerospace - Contract

On behalf of our client Ingenium is recruiting and evaluating candidates who are PTC CREO experts with experience in design and detailed development of 3D models thru the release of checked 2D drawings of complex mechanical aerospace components. Housings, forging/casting, complex tight tolerance machined parts, gears, shafts and related assemblies.

This assignment will support conversion of existing designs, models and prints of complex parts/assemblies from legacy CAD (SolidEdge) systems to PTC CREO.

Position is Onsite in the Gulf coast of the Southern US.
Position is Contract with a 6-12 month expected duration.

US Persons or Citizenship required. No Visa sponsorship possible due to the nature of the work,

CAD Designer requirements
• Generate three-dimensional models of engine parts/assemblies using PTC-CREO 2.0 or above.
• Aerospace CAD Design experience
• Generate associative detail drawings from 3D models in accordance with latest ANSI and CMI standards with GD&T where necessary.
• Ability to check 3D models/drawings with support thru system release
• PTC-CREO 2.0 or above - 3 years minimum related experience.
• Six or more years’ experience in the design of complex parts (castings and forgings).
• Six or more years’ experience with GD&T.
• Proficient/full understanding in converting inch dimensions and tolerances into metric equivalent.
• BONUS – Understanding of German language (spoken and written)

Key points
• PTC CREO, SolidEdge, machined parts design, model/drawing CAD conversion experience
• Not looking for Structural, Composite, Tooling, Harness, Oil etc. designers; Aerospace - Engine, Landing Gear, fight control or similar systems design experience.
• Compensation commensurate with skill and experience

Education: Bachelor’s degree preferred
Associates degree and related CAD/Design engineering experience considered

Ingenium Technologies Corporation is a leading engineering services organization, providing outsourcing, consulting, and talent solutions.

Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.
 
Job Number: 115287
Job Location: Rockford, IL
Rate: 50/hr.
Per Diem: possible
Overtime: possible
Duration: 6-12 Months
Start Date: 1-8-18
Input Date: 11/14/2020
Firm Name: INGENIUM TECHNOLOGY
Attention: Dave Johnson
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/315-9273
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 1

Description:
Procurement Engineer - Level 1

Location: Orlando, FL
Pay Rate: DOE ($35/hr - $37/hr)
Duration: 11-12 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**

Description
-Candidate will work with an integrated team including production operations, suppliers, sourcing, test engineers and other functional personnel to review and establish procurement quality flow-down requirements for commodity purchase requisitions, resolve procurement issues as well as complex supplier challenges
-Ensure nonconformance's are identified, trended and resolved in a timely manner.
-Responsibilities include performing root cause analysis, validating corrective and preventive actions attributed to factors that include supplier, design, production, process, software.
-As a vital member of the team, a Procurement Quality Engineer evaluates the designs, both electrical and mechanical, to ensure a producible product is being proposed and the supply base has processes in place for a smooth production flow.
-Evaluates and determines usage decisions on purchased parts and materials for conformity to functional performance, electrical, mechanical and system requirements, standards, specifications, and processing requirements using predetermined methods and in some cases may determine methods and sequences.
-Verifications will include using such measuring devices as micrometers, gauges, and calipers.
-Visually inspects for obvious defects or damage such as corrosion, cracks, dents, scratches, and pits.
-Verifies specifications using purchase orders, blueprints, drawing or inspection instructions, and checklists. Maintains records of results.
-Makes pass/fail decisions on inspected goods. May improvise or adapt inspection and measuring devices as needed.
-May monitor and verify quality in accordance with statistical process or other control procedures.
-Candidate will serve as a liaison to the hourly inspector for technical expertise and problem resolution.
-Individual shall build strong relationship with Receiving, Supplier Quality Engineering and Production Ops personnel and serve as the Non-conforming Area P.O.C.

Skill/Experience/Education (Mandatory):
-A Bachelor’s degree from a technical field or 4 yrs of related of professional/technical experience.
-Procurement Engineering – (4-5+ years' experience required)
-Inspection and auditing skills in an operational mfg. setting
-Basic Computer Skills - MS Office (Word, Excel and PowerPoint) SAP (COS / P2P)
-Proficiency Root Cause Analysis training.
-Auditing and inspection experience.
-Strong communications skills - verbal/written
-Interpersonal Skills, Work Independently, Self Starter
-Strong understanding of engineering requirements
-Must be able to identify/document supplier's quality deficiencies and ensure effective corrective action
-Capable of performing root cause analysis and identifying solutions to complex problems
-Understanding engineering drawings requirements mechanical and electrical inspection methods
-A basic understanding of special processes and an overall understanding of how to manage and interface with suppliers on a daily bases to support the Program
-Ability to focus on continual improvement practices using causal analysis tools to drive corrective and preventive actions
-Must have knowledge and understanding of critical design attributes and auditing capabilities
-Strong organizational skills w/the ability to work in a dynamic environment, multi-task, meet deadlines
-Strong communication skills (both oral and written) will be necessary to support the assignment and weekly reports
-Must be able to effectively communicate and interface with Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-This position will be located at a facility that requires special access and requires the selected candidate to be a US Citizen

Desired:
-Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-Must be able to effectively communicate and interface with Suppliers, Quality Program Management, Engineering, Supplier Quality Management, Sub-contracts (Buyers) and Government Representatives
-A basic understanding of the MFC SAP and P2P business systems
-ASQ Certification or Lean Six Sigma Certification (Green Belt/Black Belt)
-Experience with working with suppliers in a dynamic environment
-Experience with performing First Article Inspections to AS9102 requirements
-Experience with source inspection and surveillance activities at suppliers
-Strong understanding of AS9100 and ISO 9001 Quality Management Systems
 
Job Number: 8103
Job Location: Orlando, FL
Rate: 35-37
Per Diem: Split Possible
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Design Engineer - Agricultural (KS)

Description:
This Client uses Creo 4 and Windchill for their CAD package, so that experience would be helpful, but any 3D modeling experience could work.

We need to fill 3 different spots:

2nd Position: focused more on test and validation (this one could be a mechanical engineering technician)

This test person needs to have some machinery background so they can operate the equipment as well as build and test it.

Summary
Designs, develops, improves, and tests agricultural products/equipment and provides engineering support for all aspects of assigned product line to ensure functionality, quality, cost, and schedule.

Essential Duties and Responsibilities-include the following. Other duties may be assigned that require other qualifications, physical demands, and/or work environment.

• Follows all Great Plains policies and OSHA safety regulations and wears prescribed safety and protective equipment.
• Assists with the development of the product design, manufacturing, and functionality.
• Identifies any problems with the implementation or available resources that may affect the schedule or budget and communicates such problems accordingly.
• Analyzes the risks of a new design or process and communicates results to the engineering manager.
• Provides support to manufacturing to ensure product is fabricated and assembled based on the intended functionality of the design.
• Develops and maintains procedures and processes that support core machine technologies.
• Interfaces with others in the organization and customers to jointly determine customer needs and solutions.
• Designs products and systems to interface machines, hardware, and software.
• Supervises preparation of product layout and detailed drawings and schematics.
• Implements the product design within the schedule and budget parameters.
• Supervises manufacturing or building of prototype product or system.
• Evaluate field testing and recommend design modifications to eliminate machine or system malfunctions.
• Plans and develops experimental test programs.
• Analyzes test data and reports to determine if design meets functional and performance specifications.
• Confers with research and other engineering personnel and prepares design modifications as required.
• Evaluates engineering test results for possible application to development of systems or other uses.
• Recommends measures to improve production methods, equipment performance, and quality of product to engineering manager.
• Recommends changes in working conditions and use of equipment to increase efficiency of shop, department, or work crew to engineering manager.

Supervisory Responsibilities
Supervisory Position: No

Qualifications- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the principle knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience
Level 6: Bachelor's degree (B. A.) from four-year college or university; or one to two years related experience and/or training; or equivalent combination of education and experience.

Language Skills
Level 4: Ability to analyze journals, technical procedures, or regulations. Write reports, correspondence, and procedure manuals. Effectively present information and respond to questions from groups of managers, customers, and the general public.

Mathematical Skills
Level 5: Mathematical concepts such as exponents, logarithms, quadratic equations, permutations, frequency distribution, test reliability and validity, and analysis of variance, correlation techniques, sampling theory, and factor analysis.

Reasoning Ability
Level 5: Define problems, collect data, establish facts, and draw valid conclusions. Interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables.

Computer Skills
Level 2: Word processing, Internet, Email, Spreadsheets, Software Concepts, Hardware, Presentations, Graphics, Multimedia

Certificates, Licenses, Registrations
N/A

Other Skills and Abilities
N/A

Physical Demands- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical Capacity Level
Level 4: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly.

Work Environment- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Physical Capacity Level
Level 4: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or 10 to 20 pounds of force constantly.

Work Environment- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
 
Job Number: FD-112817-2KS
Job Location: Asseria, KS
Rate: $BOE/HR
Per Diem: No - Local Candidates Only
Overtime: Possible
Duration: 3-6 Months or Longer
Start Date: 12/11/2017
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer - Level 1

Description:
Location: Canoga Park, CA
Rate: $30.00 - $33.00/HR
Duration: 6 month contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates can be recent college graduates **

Job Description:
-Seeking a high-energy mechanical engineer to support our Component Product Engineering (CPE) Valve & Actuator technologies.
-This position provides technical support to project leadership for the development of in-house and supplier-based valve and actuator products.
-Valve products provide fluid control for cryogenic, gaseous, and storable propellants rocket engines and may include actuators and electronic controls.
-Position reports to Valve & Actuator CPE Director, and is assigned to Integrated Product Teams (IPTs).
-As an associate engineer, the CPE will learn technical details of valve designs, integration of components into rocket systems, traditional and additive manufacturing technologies, and test applications to provide support to IPT engineers for AR and supply-based design & development projects.

Responsibilities:
70% - Provide IPT support for valve design and development activities. This position works with senior engineers, valve design specialists, system engineers, subcontract managers, and quality engineers to develop requirements, specifications, statements of work, risk management plans, and manages the overall coordination of valve design and development. Coordinate communications between suppliers and lead engineers, valve design specialist, and functional generalist on technical issues, and manages supplier scope with the subcontract administrators. May have responsibility for managing the technical, schedule, and cost elements of valve component project tasks. Establishes criteria used in valve trade studies and make-buy decisions. Develops test plans and writes test reports, prepares presentations for internal and external customers.
20% - Provide communication of project status to the Engineering Director and IPT Leads. Project status includes overall project health, technical design and development results, risk management status, schedule and cost reporting. Supports the preparations of technical reports, presentations, and customer reviews.
10% – Supports in failure investigations and MRB actions, drawing on the technical expertise of specialists, as required. Coordinates the support of specialist and generalist to develop fault tree analysis and ensures execution, resolution, and close-out of all action plans.

Skills:
-Experience with MS Office suite tools, Matlab/Simulink, LabVIEW is a plus.

Education:
-Minimum Bachelor's Degree in Mechanical or Mechatronics Engineering is required; MS Degree is preferred.
-Related coursework in fluid mechanics, gas dynamics, and mechanical engineering design is desired.
 
Job Number: 8320
Job Location: Canoga Park, CA
Rate: $30.00 - $33.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

Description:
160214/7333750
Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

Number of Positions: 2

5 to 10 years of experience

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

** Manager likes to see college GPA's on resumes **


-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills: -Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.
Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



Skills: Required
• PROJECT ENGINEER
• COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park



Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333750
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer/Component Product Engineer II-III (Valves & Acutators

Description:
Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** This is NOT a Designer role**
-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
 
Job Number: 7823
Job Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Manager II - Linux, Embedded C/C++

Description:
The Project Manager II will lead a cross-functional team responsible for managing Engineering activities required to fulfill commitments for an airline customer program.

The role requires excellent communication skills, ability to see the “big picture”, and ability to direct efforts appropriately on prioritized tasks.

Responsibilities include the following:
• Participate in the development and analysis of customer requirements.
• Identify all customer deliverables which may include production items (mechanical, electronic and/or electro-mechanical assemblies), software, media, customer racks, documentation and systems.
• Identify internal deliverables which may include plans, schedules and other documents, prototypes, test equipment, software, test racks and more.
• Identify and secure resources required for all project tasks.
• Lead the team to establish a comprehensive, end-to-end project plan and schedule to which the team has “buy-in”.
• Maintain and manage to the project plan and schedule.
• Lead the team to coordinate design, development, documentation, integration, test and certification activities across functional groups to meet committed deliverables to customer schedule, cost and technical requirements.
• Coordinate the procurement and selection of parts, materials and components with suppliers.
• Manage third party development.
• Coordinate pre-production and design transfer to manufacturing.
• Coordinate initial customer deliveries.
• Apply standard techniques, procedures, processes and criteria to engineering assignments.
• Conduct well planned, effective meetings which drive actions.
• Continual process improvement.

Qualifications Required:
• B.S. degree or higher in Computer Science, Computer Engineering or a related field of study.
• Minimum 15 years of software and/or hardware engineering development experience (LINUX & EMBEDDED C / C++).
• At least 10 years of experience in project management of software, electronics, mechanics, and/or circuit design Must have excellent communication skills MS Office 2003 & MS Project.
 
Job Number: 361528
Job Location: Calabasas, CA
Rate: Open
Per Diem: None
Duration: Permanent
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Analyst

Description:
Quality Control Analyst

Location: Bothell, WA
Duration: 6 months

Description:
- Performs analyses and tests of components/products from suppliers or internal manufacturing, to ensure quality standards and compliance to customer, internal and regulatory requirements.
Performs a variety of qualitative tests on samples, and aids in maintenance and certification of test instruments and apparatus to ensure compliance. Prepares and monitors quality statistics and reports.
Reviews production records for conformance to procedures. Conducts non-conformance tests of manufactured, packaged or tested product.

Responsibilities include but are not limited to:
- Inspecting components and assemblies
- Calibration activities
- Evaluate and disposition production nonconforming hardware and analyze defect data to identify systemic issues and trends
- Maintain electronic or mechanical equipment used to test products or process data.
- Gathers and manipulates common data, verifies adequacy and appropriateness;
- Inputs and organizes component specifications into hardware databases
- Develops charts, diagrams, and standard reports.
- Support, participate and execute continuous improvement activities

Mandatory:
- High School diploma, or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3 Years of experience.
- Work experience inspecting components and assemblies
- Work experience performing Calibration activities
- Demonstrated work experience with components and understanding of part specifications, drawings, blueprints
- Excellent communication skills
- Intermediate Level Use of MS Office (Word, Excel, PowerPoint)
- Good understanding of manufacturing and hardware engineering processes.

Desired:
AS9100 or ISO 9001 knowledge
Familiarity with hardware engineering requirements development and design, and system integration and test

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-19321
Job Location: Bothell,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Lean Six Sigma Green or Black belt
Previous experience building Combat Vehicle

Perform drawing reviews (electrical, mechanical, machining, welding, paint) and provide constructive feedback to design engineers. Assist in the development of Final Inspection Records that support performance specification requirements. Develop detailed Quality plans for various core processes to include Large structure welding, machining, painting, vehicle assembly integration and test. Participate in Natural Work Teams to review Requests for Change and Requests for Variance. Participate in Corrective and Preventative action plan development and execution. Develop, Participate in and monitor Qual and FAT testing. Participate in 8D Containments. Report writing. Weekly and Monthly status reports. Process and fixture prove out support.
 
Job Number: 2545
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 2

Description:
Reliability Engineer - Level 2

Location: Orlando, FL
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 1 year contract
Shift: First, 9/80, exempt OT
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Built-In-Test (BIT) Engineer to execute BIT program on DoD System, to include BIT allocations, predictions, modeling, and Failure Modes, Effects and Criticality Analysis (FMECA).
-The engineer will monitor suppliers in the development and implementation of BIT architecture, requirements and implementation.
-Conduct analysis and review of data from system and supplier test events and failures to identify issues and mature the BIT system through corrective action.
-Prepare and present at design and program reviews.
-Develop BIT DRSs and support hardware design activities.
-Support SW Engineers in the implementation of BIT requirements in SRS's.
-Generate and maintain BIT maturity metrics.
-Perform Reliability and BIT testing as necessary.
-Provide Reliability support as required.

Skill/Experience/Education (Mandatory):
- Active Secret security clearance
- Experience conducting Reliability efforts and testing and verification to include experience with performing reliability predictions, and Failure Mode, Effects, and Criticality Analysis (FMECA)
- Experience with Windchill Quality Solutions Reliability software tool or equivalent tool
- Experience with reliability Failure Reporting, Analysis, and Corrective Action System (FRACAS)
- Maintainability and Testability/Built-In-Test (BIT) engineering experience to include BIT Architecture definition and BIT analysis
- Strong interpersonal skills and an ability to build effective working relationships
- Strong oral and written communication skills, technical writing experience, and an ability to communicate findings to customers and management

Desired:
- Electrical Engineering degree.
- Strong electrical background with a good mechanical understanding.
- Diagnostic algorithm development – diagnostic tests/procedures to perform fault detection and fault isolation.
- Software skills – Ability to read code and design requirements for software engineers to write BIT tests.
- Ability to teach others BIT / testability.
- Practical hands on experience with hardware test and troubleshooting.
- Familiarity and ability to model systems with US Army Materiel Systems Analysis Activity (AMSAA) Reliability Growth Planning Models (PM2-Continuous and PM2-Discrete), Reliability Growth Tracking Model (RGTM-C), Reliability Growth Projection Models (ACPM, AMPM, and ADPM), and Reliability Test Planning Tools (IPT-C and IPT-D)
 
Job Number: 7873
Job Location: Orlando, FL
Rate: 40-60
Per Diem: Split Possible
Overtime: Yes, exempt
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer - Level 3

Description:
Reliability Engineer - Level 3

Location: Orlando, FL
Pay Rate: DOE ($40/hr - $60/hr)
Duration: 6 month contract
Shift: First, 9/80, OT exempt
**MUST have an ACTIVE SECRET CLEARANCE**

Description
-Develops, coordinates and conducts technical reliability studies and evaluations of engineering design concepts and design of experiments (doe) constructs.
-Recommends design or test methods and statistical process control procedures for achieving required levels of product reliability.
-Compiles and analyzes performance reports and process control statistics; investigates and analyzes relevant variables potentially affecting product and processes.
-Ensures that corrective measures meet acceptable reliability standards.
-Analyzes preliminary plans and develops reliability engineering programs to achieve company, customer and governmental agency reliability objectives.
-May develop mathematical models to identify units, batches or processes posing excessive failure risks.
-As necessary, proposes changes in design or formulation to improve system and/or process reliability.
-May determine units and/or batches requiring environmental testing, and specifies minimum number of samples to obtain statistically valid data.
-Lead execution of reliability, maintainability, testability, and system safety activities.
-Lead and execute reliability tasks including FRACAS, failure review boards/corrective actions, development tasks such as predictions, FMECAs, BIT development and effectively analysis, HALT, and BIT demonstrations.
-Provide status on activities as part of Program reviews and Supplier CABs.
-Will provide Reliability Engineering support to the JAGM Program area
•Develop reliability predictions using Relex and/or approved prediction methodologies for mechanical and electrical designs.
•Perform Failure Mode and Effects, and Criticality Analysis (FMECA). •Implement Built-In-Test (BIT) for new designs including Development and Validation of improvements to existing BIT through lab testing and/or BIT demonstrations
•Develop reliability program growth plans, and conduct of reliability growth analysis.
•Support of design reviews and test activities as required.
•Lead Reliability testing such as Highly Accelerated Life Testing (HALT), Aging and Reliability Qualification Test (RQT).
•Participate in Corrective Action Boards (CAB) and Failure Review Boards (FRB).
•Identify Failure Review and Corrective Action System (FRACAS) trends to identify and prioritize failure modes to investigate for corrective actions.
•Review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB).

Skill/Experience/Education (Mandatory):
•Experience performing BIT analysis.
•Experience performing reliability predictions.
•Experience with reliability FRACAS and data mining.
•Experience with the FMECA process.
•Possess excellent written and oral communication skills, with experience developing and delivering presentations to peers as well as management.
•Proficient with Microsoft Office products.
•Experience with Windchill software tool.
•Must have at least an Interim Secret security clearance prior to start.

Desired:
•Strong electrical background with a good mechanical understanding.
•Practical hands on experience with hardware test and troubleshooting.
•Analytical thinker with a demonstrated ability of solving complex problems which require ingenuity and innovation.
•Candidate should be a self-starter capable of performing assigned tasks with little direction.
• Final Secret security clearance.
 
Job Number: 7875
Job Location: Orlando, FL
Rate: DOE
Per Diem: Split Possible
Overtime: Yes, exempt
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SD-Tech Pubs-LSA-3.Advanced

Description:
The Canadian Maritime Helicopter Program (CMHP) Program is looking for a talented and motivated Logistics Support Analyst to support the development and sustainment of the CMHP CH-148 Publications. Candidate will report directly to the CMHP Integrated Product Team (IPT) Lead - LSA personnel. The maintenance program is developed in the Client
Maintainability System (SAMS) and provides the framework for the maintenance publications. The Technical manual series for this program is prepared in accordance with S1000D authoring specification and delivered in an Interactive Electronic Technical Manual (IETM) product. This IETM contains principles of Operation, Maintenance, Illustrated parts Breakdown, and
Testing/Troubleshooting procedures inclusive of system diagnostics.

The primary purpose of the Logistic Support Analysis process is to provide up-front design influence to enhance overall aircraft supportability and operational readiness, while reducing the life cycle cost. The overall objectives of the Logistic Support Analysis are to establish, validate and update the maintenance concept for the entire aircraft life cycle.

The Logistic Support Analyst position requires technical knowledge of the UH-60/S70, SH-60/S70B, S-92/H92 helicopters with experience involving a broad knowledge of Helicopter / Aircraft mechanics, electrical/electronics maintenance and support functions including Component Inventory, Trade Studies, Data Analysis, and Modeling. The position also involves the application of Logistic principles to support Helicopter Maintenance and related support functions which includes Electrical / Electronic/Mechanical System Operational Analysis, and Maintenance Tasking. Familiarity with engineering drawing interpretation, maintainability and reliability principles, assembly and disassembly methods and manufacturing and inspection methods is required.
 
Job Number: 17-705-1514
Job Location: Northeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Engineer

Description:
Role: Senior Mechanical Engineer
Location: Wilsonville, OR 97070-9215
Duration: 07+ months Contract (May convert to full time)

Note: No new graduates, client wants candidates with 6-10 years of experience! U.S. Citizens OR Permanent residents and those authorized to work in the U.S. are encouraged to apply


Responsibilities:
• Client is looking for an experienced Mechanical Engineer with strong analysis and problem solving skills to support engineering effort on HGS product.

Successful candidate will be expected to perform or support the following tasks:
• Analyze drawings and conduct tolerance analysis
• Create and present clear and concise analysis documents in peer review
• Create redline drawings from change requests and provide guidance to drafting team members
• Perform autonomously in a processed oriented environment under the direction of a project lead
• Perform under tight schedule constraints

Required Qualifications:
• Bachelor’s degree in Mechanical Engineering
• Proficient in a 3D CAD solid modeling software package (SolidWorks and/or UG NX)
• Proficient with ANSYS FEA software package
• Highly proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles
• Strong technical, analytical and problem solving skills
 
Job Number: 52795
Job Location: Wilsonville, ORE
Rate: open
Per Diem: possible
Overtime: No
Duration: 07+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret / Matlab Simulink CA

Description:
160101
Requirement #AERO-REQ-0625
Work Location Palmdale, CA
Work WeeK 9/80-A
Priority High
Needed Date 08/29/2017
End Date 05/29/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:, Can start w/o clearance:No, Interim Clearance Sufficient:No)


Title: Software Engineer

Description
Develop, analyze, integrate, and test flight control laws and embedded software for the Advanced Development Programs (ADP, Skunk Works) Flight Control and Vehicle Management Systems Integration team. Contribute to software requirements, design, code, reviews, and test of operational flight programs. Good oral and written communication skills required as is the ability to flex and adapt in a fast-paced team environment. Selected applicant will be subjected to government security investigation and must meet eligibility requirements for access to classified information and special program clearances
Candidate must possess an active SECRET clearance.

Skill/Experience/Education
Mandatory:

Candidate must have Flight Control system experience and Experience with MATLAB, OR Simulink
Candidate must possess an active SECRET clearance.
Desired:

Bachelor's Degree in Electrical, Mechanical or Aerospace Engineering


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0625
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $75/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
** Candidates must be U.S. Citizens. Dual Citizens or non-U.S. passport holders are NOT acceptable **

Duties:
-Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
-Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
-Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
-Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
-Represents the organization in conferences to resolve important questions and to plan and coordinate work. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date.
-Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians. Develops solutions to complex problems which require the use of ingenuity and creativity.
-Work is reviewed at extended intervals for desired results and achievement. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

Breakdown:
60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
-Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).


Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
-Advanced degree desirable.
-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
-Trained/experienced in Microsoft Office.

Skills Required:
AEROSPACE SYSTEMS ENGINEERING
 
Job Number: 8319
Job Location: Canoga Park, CA
Rate: 50-75
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV / hardware experience in the requirements, integration and risk discipline of Systems Engineering / propulsion hardware CA

Description:
160779/7616417

Job Title: Specialist Systems Engineer IV
$75/hr max
Looking for hardware experience in the requirements, integration and risk discipline of Systems Engineering. Would prefer this experience to be in propulsion hardware.


Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization. Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects. Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems. Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable. Represents the organization in conferences to resolve important questions and to plan and coordinate work. May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians. Develops solutions to complex problems which require the use of ingenuity and creativity. Work is reviewed at extended intervals for desired results and achievement. Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.



60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.



15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.



15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.



10% - Communicates results in oral presentations and written communication.

Skills:
-9 years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.

-Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).

Education:
-Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).

-Advanced degree desirable.

-Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.

-Trained/experienced in Microsoft Office.

Skills:
Required

AEROSPACE SYSTEMS ENGINEERING

State/Province: California
City/Town: Canoga Park

Start Date: 12/18/2017 Hours Per Week: 40.00
Est. End Date: 06/17/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7616417
Job Location: Canoga Park, CA
Rate: 75/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer URGENT WA

Description:
7468511

Job Title: Sr. Manufacturing Engineer
47.50/hr

Number of Positions: 1

Remaining Positions: 1

Duties:
In this role, you will lead manufacturing activities and work with a cross-functional team of engineers, as well as program management, assembly technicians, and test personnel to ensure quality manufacture of mechanical hardware. Responsibilities include manufacturing process development/maintenance, supplier support, work instruction creation, tool design, personnel training, process ownership, and management of hardware flow through production including budget and schedule. Create work instructions, bills of materials, routings.



Skills:
Microsoft Office Suite, creation of work instructions, creation of bills of materials

Desired Skills: Delmia, Teamcenter, MRP/ERP, Solid Modeling

Education:
Bachelors in Manufacturing Engineering, Mechanical Engineering and/or Associates with 10+ years experience and/or 15+ years applicable experience


Skills:
Required

MANUFACTURING ENGINEER



State/Province: Washington
City/Town: Redmond

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 04/30/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 Days Per Week: 5.00
 
Job Number: MB-7468511
Job Location: Redmond, WA
Rate: 47.50/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to UTC engineering methodologies

Requirements:
• Bachelor's degree or equivalent in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience is required.
• Must be able to verify U.S. Person status.
 
Job Number: 8290
Job Location: Independence, OH
Rate: $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Location: Independence, OH
Rate: $41.13/HR
Duration: 1 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to company engineering methodologies
• Strong background of strength, stability, residual strength, fatigue and fracture analyses of metallic primary structural components using both computer modeling analysis methods and classical hand analysis methods.
• Clear understanding of external loads, load paths and development of component and system free body diagrams
• Demonstrated ability to develop internal loads using beam model FE methods
• Demonstrated mechanical aptitude
• Strong understanding of aerospace materials
• Good understanding of manufacturing processes
• Proficient at using computing tools and programs including MathCAD, MS Office, Windows, and FE
• Experience with ABAQUS or ANSYS is required
• Prior use of PDM/PLM system (Smarteam, MatrixOne, Teamcenter)
• Strong communication skills (written and verbal)
• Strong interpersonal skills

Requirements:
- Bachelor's degree or equivalent in mechanical/aerospace engineering or related discipline with a minimum of 5 years of directly related stress analysis experience required.
- Must be able to verify U.S. Person status as defined by International Traffic in Arms Regulations (ITAR).
 
Job Number: 8293
Job Location: Independence, OH
Rate: $41.13/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer - Cabin & Cargo

Description:
Bachelor's Degree (B.S) in Mechanical, Aerospace, or Civil Engineering
Minimum of 5 years in cabin or cargo compartment stress analysis.
Experience in static (FE and free-body), fatigue and transient analysis, Nastran, Patran, MathCad.
Familiar with FAA/EASA Aircraft regulatory requirements.
Able to utilize Microsoft Excel, Word, PowerPoint and Project PC tools
Primary Responsibilities: Plan, organize and prioritize work contents based on project deliverables.
Perform detailed stress analysis of aircraft cabin or cargo components, by classical hand analysis as well as Finite Element methods, to support the structural design efforts of new and modified components from the conceptual phase to development and certification.
Generate stress substantiation reports.
Develop or review structural qualification plans in accordance with company standards and regulatory requirements.
Review and approve vendor drawings, stress reports, and test reports when delegated.
 
Job Number: 683717
Job Location: Mobile, AL
Rate: 62.00-68.00
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Canoga Park, CA
Rate: $70.00 - $75.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-Must have experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).
-Prefer candidates with stable work histories (are not “job hoppers”).
-Master’s degree strongly preferred.

The selected candidate will:
- Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
- Perform structural analyses utilizing class hand-calculation methods and finite element models.
- Construct and solve static and dynamic finite element models with ANSYS
- Participate in dynamic test planning and execution.
- Correlate structural models to test results.
- Interpret analytical results, assess design margins and prepare technical reports.


Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 8228
Job Location: Canoga Park, CA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.


The selected candidate will:
Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.


Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.


Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 7877
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer - Composites

Description:
Location: Sacramento, CA
Rate: $70.00 - $75.00/HR
Duration: 1 year contract
9/80 Schedule
OT Possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience **

Duties:
-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.
-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.
-Experience with solid propellants or other viscoelastic materials.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.

The selected candidate will:
•Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
•Perform structural analyses utilizing class hand-calculation methods and finite element models.
•Construct and solve static and dynamic finite element models with ANSYS
•Participate in test planning and execution.
•Correlate structural models to test results.
•Interpret analytical results, assess design margins and prepare technical reports.

Skills:
-Demonstrated experience performing linear, non-linear and structural analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Proficiency using CAD tools including NX strongly desired.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

Education:
-BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master’s degree is strongly preferred.
 
Job Number: 8359
Job Location: Sacramento, CA
Rate: $70.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer - Composites ** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience ** CA

Description:
160837/7630372
Job Title: Structural Analysis Engineer - Composites
Sacramento CA
75/hr max
12 months
** Candidates must have hands-on structural analysis experience using various composite material systems and/or solid rocket motor grain experience **


Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis). Knowledge of other finite element software such as ABAQUS is beneficial.

-Aerospace or Defense related experience preferred over airframe or aviation experience.

-Experience analyzing composites including classical lamination theory and within ANSYS environment. Experience with filament wound composites is a plus.

-Experience with solid propellants or other viscoelastic materials.

-Recent college grads are okay with at least some ANSYS experience.

-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).

-Master's degree strongly preferred.

The selected candidate will:

•Assist other analysts and designers engaged with development and production of new and existing solid rocket motors, propulsion system components and secondary structure.
•Perform structural analyses utilizing class hand-calculation methods and finite element models.
•Construct and solve static and dynamic finite element models with ANSYS •Participate in test planning and execution.
•Correlate structural models to test results.
•Interpret analytical results, assess design margins and prepare technical reports.
Skills: -Demonstrated experience performing linear, non-linear and structural analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as ANSYS is required.
-Proficiency using CAD tools including NX strongly desired.
-Knowledge and experience with aerospace product development efforts is desired.
-Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.
Keywords:
Education: -BS in Mechanical, Aerospace, Civil Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.
-Master's degree is strongly preferred.

Skills and Experience:
Required Skills:
AEROSPACE STRUCTURAL ANALYSIS
ANSYS
AEROSPACE

# of Positions: 3

Location:
Sacramento, CA
Hwy 50 and Aerojet Rd., 95670

Schedule:
Start Date: 01/02/2018
Estimated End Date: 12/21/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: 9/80 Schedule. OT possible.
 
Job Number: MB-7630372
Job Location: Sacramento, CA
Rate: 75/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer / no clearance / candidates with recent ANSYS Structural Analysis experience URGENT CA

Description:
160343/7441118

Job Title: Structural Analysis Engineer

Additional Information: Candidates needed! Manager is interviewing. Must have recent Aerospace structural analysis experience using ANSYS. See job description for other requirements.

-Must have recent experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).

-Aerospace or Defense related experience preferred over airframe or aviation experience.
-Recent college grads are okay with at least some ANSYS experience.
-Prefer candidates with stable work histories (are not “job hoppers” and do not have big resume gaps).
-Master’s degree strongly preferred.



Number of Positions: 4

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Must have experience using ANSYS (or Workbench) on Structural Analysis specifically (not fluid analysis).



-Prefer candidates with stable work histories (are not “job hoppers”).



-Master’s degree strongly preferred.



The selected candidate will:

Assist other analysts and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
Perform structural analyses utilizing class hand-calculation methods and finite element models.
Construct and solve static and dynamic finite element models with ANSYS
Participate in dynamic test planning and execution.
Correlate structural models to test results.
Interpret analytical results, assess design margins and prepare technical reports.



Skills:
-Demonstrated experience performing linear, non-linear and structural dynamic analyses supporting design, development and production qualification of new or updated products is required.

-Proficiency using finite element analysis tools such as ANSYS is required.

-Knowledge and experience with aerospace product development efforts is desired.

-Must have the ability to read and interpret engineering drawings.

-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.



Education:
-BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural analysis or an equivalent combination of education and experience.

-Master’s degree is strongly preferred.

Skills:
Required

ANSYS AEROSPACE STRUCTURAL ANALYSIS FINITE ELEMENT ANALYSIS

State/Province: California
City/Town: Canoga Park

Start Date: 10/02/2017 Hours Per Week: 40.00
Est. End Date: 04/01/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7441118
Job Location: Canoga Park, CA
Rate: 65-75/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
Location: Houston, TX
Rate: $53.00/HR
Duration: 6 month contract
Shift: 1st Shift

**Must be a U.S. Citizen**

Job Description:
- Performs low to mid complexity research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- Conduct an ANSYS Thermal focused analysis of the affected hardware.
- Execute an ANSYS Stress analysis and provide Analysis results & stress report. (MSy and MSu)

Requirements:
- Bachelor’s Degree
- Prefer local candidate.
- Experience with classical stress analysis and mechanical design.
- Aerospace, Automotive, and/or Mechanical Engineering experience preferred.
 
Job Number: 8294
Job Location: Houston, TX
Rate: $53.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Dynamics Engineer

Description:
Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
**Must have experience using Nastran to perform static and dynamic finite element analysis**
• Assist other engineers and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.
• Perform structural dynamic analyses utilizing finite element models and classic hand calculation methods.
• Construct and solve static and dynamic finite element models with Nastran.
• Exercise expertise to provide guidance to program/product team and other structural analysis team members.
• Interpret and assess analytical results and prepare technical reports.


Skills:
-Demonstrated experience performing structural dynamic analyses supporting design, development and production qualification of new or updated products is required.
-Proficiency using finite element analysis tools such as Nastran is required.
-Knowledge and experience with aerospace product development efforts is desired. Must have the ability to read and interpret engineering drawings.
-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.
-Familiarity with structural dynamic testing, vibration environment definition and analysis of high frequency data is desirable.

Education:
-This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural dynamics analysis.
 
Job Number: 7712
Job Location: Canoga Park, CA
Rate: $60.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Dynamics Engineer CA

Description:
160517/7422960

Job Title: Structural Dynamics Engineer

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





-Must have experience using Nastran to perform static and dynamic finite element analysis.





• Assist other engineers and designers engaged with development and production of new and existing liquid rocket engines, propulsion system components and secondary structure.

• Perform structural dynamic analyses utilizing finite element models and classic hand calculation methods.

• Construct and solve static and dynamic finite element models with Nastran.

• Exercise expertise to provide guidance to program/product team and other structural analysis team members.

• Interpret and assess analytical results and prepare technical reports.

Skills:


-Demonstrated experience performing structural dynamic analyses supporting design, development and production qualification of new or updated products is required.

-Proficiency using finite element analysis tools such as Nastran is required.

-Knowledge and experience with aerospace product development efforts is desired. Must have the ability to read and interpret engineering drawings.

-Proficiency in Microsoft Office products (Word, Excel and Power Point) is required.

-Familiarity with structural dynamic testing, vibration environment definition and analysis of high frequency data is desirable.

Education:
-This position requires a BS in Mechanical Engineering or Engineering Mechanics and at least 5 years of engineering experience with structural dynamics analysis or an equivalent combination of education and experience.

Skills:
Required

STRUCTURAL ANALYSISFINITE ELEMENT ANALYSISNASTRAN
Additional


State/Province: California
City/Town: Canoga Park

Start Date: 08/28/2017 Hours Per Week: 40.00
Est. End Date: 02/25/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7422960
Job Location: Canoga Park, CA
Rate: 70-75/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Structural/Mechanical Design Engineer

Description:
CATIA V5 experience
 
Job Location: Dallas, TX
Duration: 50/hr
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Unique Skills:
- Bachelors degree in aerospace or mechanical engineering
- Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer.
- Extensive composite lay-up and fabrication experience preferred
- Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, empennage).
- Experience should be in a Production and/or schedule-driven environment.
- Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
- Strong written / verbal communication and interpersonal skills.
- Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-162
Job Location: Savannah, GA
Rate: $62 - $68
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Flight Control Systems Engineer
Irvine, CA
12+ month contract

Our client is looking for a Senior Systems Engineer to take on design responsibilities in the development of pilot control systems, throttle control systems, large actuator, and related flight control products for the next generation of business, regional, military and air-transport aircraft.

Engineering duties will span the entire product lifecycle, from initial design and requirements capture through manufacture and system testing. While working in a cross-functional team environment, daily tasks will include:
• Requirements development and management,
• System/Mechanical design, modeling, analysis, and review,
• Budget and schedule management,
• Test/verification planning, development, and execution,
• Customer interface, coordination, and communication, and
• Coordination with manufacturing operations.

Qualifications:
The ideal candidate must have extensive knowledge and experience with detailed electro-mechanical systems such as pilot controls, throttle controls, actuators, or other aerospace mechanical systems. Furthermore, a strong history of leading failure investigations with various suppliers, prepare Failure Condition/Corrective Action Reports (FCARs), and prepare qualification test plans, procedures and reports using commercial aerospace development processes. Qualification test experience will differentiate the most qualified individuals. Proficiency in using DOORS software for Requirements capture and management is a plus.

Experience with Matlab/Simulink and NX Cad Software and their application to mechanics and system modeling is highly desired.

Knowledge/experience in the area of integrated system/interface design, aerospace development process, electro-mechanical systems or aerospace mechanical systems is desired.

Education:
Minimum Degree: Bachelors’ of Science in an Engineering Discipline such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering
 
Job Number: 52823
Job Location: Irvine, CA
Rate: DOE
Per Diem: Yes
Overtime: Possible
Duration: 12+ months
Start Date: 1/8/17
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer (Aero Thermal Fluids) Level III

Description:
Location: Canoga Park, CA
Rate: $40.00 - $46.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must have Heat Transfer experience**
** Candidates need to do 2D/3D modeling and simulation for heat transfer analysis **
** Candidates must have experience in using ANSYS/Workbench for thermal analysis and/or SINDA/FLUINT thermal analysis software **
-Analysis and Design of aerospace propulsion systems at the component and system levels, specifically addressing liquid rocket engines.
-Work will require use of heat transfer analysis tools, along with related fluid dynamic and combustion tools.
-Work with ATF Lead engineers and other senior engineers in a team setting to accomplish defined goals.
-Conduct thermal and fluid analyses related to the design, test and verification of liquid rocket engines.
-Specific job assignments may entail analytic modeling, defining thermal and fluid boundary conditions and conducting computer simulations to assess the thermal response and performance of engine hardware.
-Additional responsibilities may include pre- and post-test analysis including data analysis of test results.
-Further requirements include documentation of Program and ATF Discipline results.

Skills:
Required:
-Relevant college coursework in thermodynamics, heat transfer, and fluid dynamics.
-2 to 4 years of related professional experience.

Desired:
-M.S. degree in Mechanical or Aerospace engineering.
-Advanced college coursework in thermodynamics, heat transfer, and fluid dynamics.
-Propulsion analysis experience in liquid rocket engine or gas turbine engines.


Education:
B.S. degree in Mechanical or Aerospace engineering
 
Job Number: 8084
Job Location: Canoga Park, CA
Rate: $40.00 - $46.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer II (Architecture)

Description:
Role: Systems Engineer II (Architecture)
Duration: Temp-to-Hire
Location: Rancho Santa Margarita, CA.

Job Summary
• System Engineer that has a passion for network Architecture infusion Aerospace Software and Hardware.
• Performs systems engineering tasks as part of design and development process for secure communication system product lines. Abilities must include an in-depth understanding and experience with software, mechanical and electrical knowledge and skills in performing the analysis, specifications, requirements, traceability, compliance to standards, implementation, testing verification & validation, and documentation.

Primary Responsibilities
• Participates on product teams to provide systems engineering expertise in design, development, programming, testing, and implementation for secure communication systems product lines.
• This includes, but not limited to, analysis, specifications, requirements, traceability, compliance to standards, implementation, testing verification & validation, documentation, test fixtures, and test procedures.
• Must have a working knowledge of real time embedded software and related features, as well as the ability to provide design guidance to the Engineering staff performing design and development tasks.
• Ability to documents new features in specifications and requirements documentation to an engineering level.
• Ability and experience with requirements traceability, from a system specification level, to software requirements, to software code, to software test cases, to system functional test cases.
• Work with Sales, Marketing, Program Management, and the other engineering functions to define, scope, estimate and schedule.
• Performs related duties and responsibilities as assigned.

Qualifications:
• Experience with Ethernet and IP networking technologies, including Voice over Internet Protocol (VoIP), control mechanisms like SNMP, and Quality of Service (QoS).
• Experience with aerospace and defense standards such as SAE/AS9100, RTCA/DO-178, RTCA/DO-254, RTCA/DO-160, as well as military standards.
• Experience with U.S. FAA flight standards related to RTCA/DO-178 and RTCA/DO-254, such as ARP4754 (Guidelines for Development of Civil Aircraft and Systems) and ARP4761 (Safety Assessment Process).
• Good writing and communication skills as demonstrated by employment interview and success in prior positions.
• Must have demonstrated hands-on work approach and examples of hands-on involvement in prior work positions.
• Demonstrated successful task management skills utilized in prior positions.
• Must have a demonstrated ability to be creative, persistent and stay with a problem until it is resolved.

Education/Previous Experience Requirements:
• Bachelor’s Degree or Master’s Degree in Mechanical Engineering, Electrical Engineering, Physics, Software Engineering, or related field.
• 5-10 years of experience in an engineering capacity with knowledge of communication systems, systems.
• U.S. Export Policy Notice::To comply with U.S. export laws and regulations.
 
Job Number: 52841
Job Location: Rancho Santa Margarita, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Naveed
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer

Description:
Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Duration: 1 year contract


Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 8031
Job Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer / CREO2 3D CAD modeling skills with technical product design experience in liquid rocket / aerospace systems CA

Description:
7352963
Job Title: T3 Engine System Design Engineer

Duties: -Performs engine system level design tasks for liquid rocket engines.

-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills: -CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education: -Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.

Skills and Experience:

Required Skills:

CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
AEROSPACE SYSTEMS ENGINEERING
WINDCHILL

Additional Skills:

CAD
CAD SOFTWARE
DESIGN ENGINEER
ENGINEER
FABRICATION
PRODUCT DESIGN
SYSTEM LEVEL
SYSTEM LEVEL DESIGN
T-CARRIER
MACHINING
PTC
TEST SUPPORT
AEROSPACE
AEROSPACE SYSTEMS
ANALOG SILICON
AUTO CAD
CAD MODELING
ENGINES
LEVEL DESIGN
MECHANICAL ENGINEERING

Minimum Degree Required: Bachelor's Degree

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/31/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
 
Job Number: MB-7352963
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 12 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designers III & IV - WA

Description:
SEVERAL OPENINGS IN THE SEATTLE/EVERETT, WA AREA.

Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction.

Experience in CATIA V5 required.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: TechDesWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer / Mechanical Lab II

Description:
Test Engineer / Mechanical Lab II

Canoga Park, CA
6 Month Contract
$34.00-37.00/Hr

1st Shift

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-This position is for a test engineer in the Materials Characterization & Analysis group in the Material & Process Engineering Department.

-Selected candidate will be responsible for providing materials related technical support for metallic and non-metallic materials to product teams.

-Materials testing, involves the use of varied testing equipment and instruments to perform tensile test, hardness testing, Impact Testing for oxygen compatibility, flammability testing, environmental exposure material conditioning and testing.

-Position requires good hands on skills and familiarity with various measurement tools, and gages, and ability to read and interpret both Spec and Eng hardware drawings.

-Personnel should be able to prep and fabricate test samples, and measure density and specific gravities as needed.

Skills:
-Candidates must have the ability to work in a team oriented environment, have excellent problem solving skills, interpersonal and communication skills, organizational and strong computer knowledge is mandatory. Hands on experience with tensile machines, hardness tester, measurement tools i.e. micrometers, calipers, depth gages, etc.

-Some experience in an industrial setting is also desirable as well as demonstrated proficiency in practical application of engineering principles, or quality systems support.

-Familiarity with Materials Specifications and working knowledge of ASTM test procedures are a plus.

-Familiarity with gaseous & liquid delivery systems and their related components, i.e. plumbing, valves, gages & safety relief systems is highly desirable.

-The ability to design & create engineering drawings for the fabrication of unique test components and fixtures is also a plus.

Education:
AA degree or higher with 5-10 years lab/material testing experience is highly desired.
 
Job Number: 8097
Job Location: Canoga Park, CA
Rate: 34.00-37.00/Hr
Per Diem: Possible Split
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test-Configuration Technician

Description:
From the Hiring Manager:

* This position has the best chance of going temp-to-perm if the candidates the right fit
* Position duties will vary from day-to-day or week-to-week; for example, one day may be asked to work the production floor, the next doing Quality Control Testing and following the week Research & Development work with Engineering

“MUST-HAVES”:
1. Someone with a strong understanding of Electrical Systems or Electrical Theory
2. General Networking knowledge / experience; setting up computers, testing components, troubleshooting networks
3. Research & Development

Summary

This position will require a person with a diversified skill sets who is flexible and able prioritize workloads in a rapidly changing environment. The person must be organized, detail oriented, and a self-starter able to work with little supervision. A typical day can vary greatly and the person can be asked to do production work, QC testing, and/or R&D work with Engineering. The production work would require some electro-mechanical assembly skills for assembling and wiring small to medium size panels and enclosures. The quality work would include testing of incoming components as well as functionality testing for finished assemblies or systems. The R&D work would be hands on work with engineering to help develop prototype concepts and designs. There is a possibility of some travel to help the fielding of newly shipped projects.

Job Description:

> Assembles, tests, troubleshoots, and repairs electrical/electronic, mechanical, hydraulic, and pneumatic systems and components
> Reads and comprehends manuals and related manufacturing documentation
> Troubleshoots and assesses electrical/mechanical systems while providing feedback and implements approved solutions
> Completes full system test of integrated systems as well individual components
> Maintains thorough documentation and records
> Helps develop and write testing procedures for systems
> Assemble mechanical parts, as instructed in accordance to manufacturing documentation (assembly instructions, process documents, travelers, etc.) into sub-units or complete units.
> Wire electronic components as instructed in accordance to manufacturing documentation (assembly instructions, process documents, travelers, etc.) into sub-units or complete units
> Responsible for soldering and crimping connectors
> Completes production/quality related documentation
> Assembles repairs and fabricates parts by operating mechanical equipment or tools, in conjunction with adhering to proper handling and safety requirements (Cutting and Fabrication).
> Performs work in accordance with quality and engineering standards
> Keep work area clean and organized as to present a professional work environment
> Complete any other work-related task as directed by supervisor

Experience / Requirements:
> 5 + years’ experience in a R&D/Quality/Manufacturing environment
> Associates Degree or higher in an Electronic or Networking Field REQUIRED
> Ability to read / interpret complex instructions and engineering drawings/specifications (Mechanical and Electrical)
> Experienced / skilled with hand tools (Wrenches, Screwdrivers, Torque tools, Small power tools)
> Able to work overtime when needed (required) and travel as needed (Expected to be less than 25%)
> Must be a U.S. Citizen

Preferred Experience:

* Control systems
* CPU configuration
* Various Communication types (serial, digital, can bus, etc.)
* General Networking
* Electrical Theory
* Signal analysis (Power, Video and RF)
* Assembly and repair of various termination types (Crimp and Solder)
* Electro-Mechanical assembly and repair
* Testing equipment (Multi-meters, power supplies, load banks, signal generators, oscilloscope etc.)

Preferred Certifications: (Current or Non-Current)

* IPC-A-610, IPC-A-620 and/or CIS IPC A J-STD-0001
* Quality Controlled Environment

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 – 6180
Office: (508) 230 – 5030 x123
 
Job Number: 021_2018
Job Location: Elkridge, MA
Rate: DOE
Per Diem: Split Possible
Overtime: Yes
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermodynamics Engineer – Level 4

Description:
Location: Denver, CO
Rate: DOE
Duration: 1 year contract (starting in January)
Overtime: Exempt

**MUST be a U.S. Citizen**

Job Description:
- Performs thermal analysis at both the detailed component level and at the systems level.
- Thermal analyses are performed to verify designs will operate within prescribed temperature limitations, and to prescribe thermal protection systems when needed.
- Develops specialized analytical tools as required to perform these functions.
- Develops procedures and plans for thermodynamic test programs when existing analytical capabilities are insufficient.
- Resolves issues related to thermodynamics that arise due to operational use in the field.

Basic Requirements:
- Bachelors Degree in Mechanical, Chemical, Aerospace or associated field of Engineering
- 10 years demonstrated ability to perform system-level thermal analyses.
- Capability to interpret system-level requirements, perform analysis to verify that those requirements are met, and document the verification results.
- Ability to build analysis models and tools based on program needs.
NOTE: Relocation is not available

Preferred Qualifications:
- Candidate must have the ability to quickly understand and become proficient with various analysis tools and associated computer programs.
- Experience with multiple software tools is desirable including ability to use, Matlab, Sinda/FLUINT, Thermal Desktop, and SpaceClaim.
- Demonstrated proficiency applying analysis results to hardware solutions is desirable
- Ability to support test activities, including requirements definition, test planning, test, and test reporting is preferred
- Experience with aerospace, and specifically space system, work is desirable including knowledge of cryogenic propulsion systems.
- Risk management experience, including any human spaceflight experience, is desirable Works well in team environments and with minimum supervision
 
Job Number: 7983
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Maker / no clearance / tool and die or jig and fixture / form block template making / hand tools and Shop Machinery / Blueprint reading / metrology (i.e. Laser tracker, measuring devices) / 10 openings! URGENT URGENT CA

Description:
160049
Requirement #AERO-REQ-0623
Work Location Palmdale, CA
Work Week 9/80-A
Priority High

Number of Resources 10



Title: Tool Maker

Description

Plans the job, determines methods and sequence of operations, makes layouts, fabricates, assembles and proves complex tools and dies such as tool masters, master tooling gauges, deep draw, multiple, cam action and compound dies and constructs all types of sizes of major jigs, fixtures, tool masters, master tooling gauges and related tooling, where critical reference points, surfaces, locators and tooling holes must be established and coordinated among three or more nonparallel planes or two or more radial profiles, and it is required to exercise a complete knowledge of jig and fixture building, tool and die making, and machine shop theory and practice, including the principles and use of applicable optical equipment; prepares the breakdown of all types and sizes of major jigs and fixtures, tool masters or master tooling gauges into components, details and accessories as required for the construction of these tools by other employees; determines the methods and sequences of fabrication and assembly, and coordinates the work of such employees; performs the final setup and assembly of components, details and accessories and follows such tools through to completion and sell-off. May develop, fabricate, and prove optical and mechanical accessories for the purpose of adapting and modifying optical instruments and similar equipment used in building and checking major tooling. Performs modification and rework of the level of difficulty of the operations described above. Demonstrates a complete understanding of the principles and use of applicable optical equipment such as theodilites and computer aided measuring equipment such as laser trackers. Must posses a minimum of four years of experience working in tool and die or jig and fixture building, form block and/or template making or equivalent.

NEED 10 RESOURCES FOR THIS POSITION.


Skill/Experience/Education
Mandatory:

Four years of experience working with tool and die or jig and fixture. Experience with form block and/or template making or equivalent. Experience with hand tools and Shop Machinery. Experience with Blueprint reading. Experience with metrology (i.e. Laser tracker, measuring devices)




Shift 1st Shift
OT Allowed Yes (#hours allowed: 0, Pre-Approval Reqd.:Yes)
Travel No
Non-Exempt

Rates
0-4 YrsPay Rate: 50.00 USD
5-8 YrsPay Rate: 55.00 USD
9+ YrsPay Rate: 60.00 USD
 
Job Number: JE-0623
Job Location: Palmdale, CA
Rate: 50-60/hr DOE
Per Diem: no
Duration: 9 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling & Equip Cat Design Engineer

Description:
Tooling & Equip Cat Design Engineer
Savannah, GA
Rate: $60-$66

Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years of drafting/design experience to include documented experience in a tool shop or machine shop environment. Two (2) years of direct tool design experience required.


Position Purpose:
Design, build and maintain PS (and customer facing) tooling & equipment catalog to be used in the manufacture and support of Company aircraft.

Principle Duties and Responsibilities:

Essential Functions: 1. Under minimal supervision, design, build and maintain comprehensive PS & customer facing tooling catalog that will be used in the manufacture and support of Gulfstream aircraft. 2. Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system. 3. Collaborate with PS Tool design Engineer II, engineering, manufacturing engineering and operations to determine optimal procedures 4. Technological knowledge about SAP’s services, plant maintenance, WMS, and using reporting transactions. 5. The ability to explain technical information in a clear and simple manner 6. Actively works to improve daily processes, and ensures all work meets customer requirements. 7. Assist PS Tool designer II as needed, during Periodic and Conformity Inspections. 8. Assist in formulating Tooling catalog Design policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Good negotiating skills.
2. A good understanding of aircraft maintenance tooling and GSE. 3. Team working and team management experience.
4. Good project management skills.
5. Good organization and problem-solving skills.
 
Job Number: 8229
Job Location: Savannah, GA
Rate: $60-$66
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tooling and Equipment Cat Design Engineer

Description:
Tooling & Equip Cat Design Engineer
Position Purpose:
Design, build and maintain PS (and customer facing) tooling & equipment catalog to be used in the manufacture and support of aircraft.

Essential Functions:
• Under minimal supervision, design, build and maintain comprehensive PS & customer facing tooling catalog that will be used in the manufacture and support of aircraft.
• Conduct reviews and analyze technical documents to gain a thorough understanding of how complex systems operate and how they are to be integrated into technical manuals to provide the end user with the level of text and graphics to support the efficient return to service of the aircraft system.
• Collaborate with PS Tool design Engineer II, engineering, manufacturing engineering and operations to determine optimal procedures
• Technological knowledge about SAP’s services, plant maintenance, WMS, and using reporting transactions.
• The ability to explain technical information in a clear and simple manner
• Actively works to improve daily processes, and ensures all work meets customer requirements.
• Assist PS Tool designer II as needed, during Periodic and Conformity Inspections.
• Assist in formulating Tooling catalog Design policies, procedures, and specifications as required. Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Two (2) years of drafting/design experience to include documented experience in a tool shop or machine shop environment. Two (2) years of direct tool design experience required.


Other Requirements:
• Good negotiating skills.
• A good understanding of aircraft maintenance tooling and GSE.
• Team working and team management experience.
• Good project management skills.
• Good organization and problem-solving skills.
 
Job Number: 24-214
Job Location: Savannah, GA
Rate: $60-$66
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer

Description:
Turbomachinery Mechanical Design Engineer

Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.


Skills:
-Knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-May require the use of various computer systems to produce data, analysis and reports.


Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience required.
 
Job Number: 8041
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / CREO / turbomachinery, rotating machinery experience required CA

Description:
160525/7351950
Job Title: Turbomachinery Mechanical Design Engineer

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.


Skills:
Required

GEOMETRIC TOLERANCING GEOMETRIC DIMENSIONING AEROSPACE DESIGN CREO

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7351950
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / Product Definition - Level III

Description:
Location: Canoga Park, CA
Rate: $50.00/HR
Duration: 3+ month contract
Shift: Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates should have at least 3 years of experience **
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development and checking of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.


Skills:
-Must possess advanced knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 is required with advanced modeling skills including surfacing) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of Windchill PLM functionality for CAD data management and drawing release preferred.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-Knowledge of castings and airfoil parts is a plus.
-May require the use of various computer systems to produce data, analysis and reports.


Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.
-Product Definition (Drafting) specialists will be considered with requisite modeling and drawing creation skills and appropriate education and/or experience.
 
Job Number: 8322
Job Location: Canoga Park, CA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer III

Description:
Seeking 5 Turbomachinery Mechanical Design Engineer III for an opening in Canoga Park, CA

RESPONSIBILITIES:
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.

REQUIRED SKILLS:
-Knowledge of geometric dimensioning and tolerancing.
-Aerospace Design
-Creo
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD; Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-May require the use of various computer systems to produce data, analysis and reports.

EDUCATION:
Bachelor's or Master's degree in an appropriate engineering discipline.
Must have a minimum of 3 years of experience 5+ years of rocket propulsion design experience preferred.

WORK SCHEDULE
5/40, 1st Shift
 
Job Number: 166616
Job Location: Canoga Park, CA
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer III CA

Description:
Job Title: Turbomachinery Mechanical Design Engineer III

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates should have at least 3 years of experience **

Ideal candidates will have 3 to 10 years of experience.



-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.


Skills:
Required

GEOMETRIC TOLERANCING GEOMETRIC DIMENSIONING AEROSPACE DESIGN CREO

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7517058
Job Location: Canoga Park, CA
Rate: 50/hr max
Duration: 6 month contract
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
WB-WPB Flight Test-Grade 10

Description:
PURPOSE
Flight test planning, instrumentation checkout, flight test conduct (including real-time monitoring), post test data analysis, and reporting on helicopter flight tests in structures and dynamics.

COMPETENCIES
1. Determining measurement and flight condition requirements necessary to safely provide evaluation, qualification and certification data.
2. Test conduct involves briefing flight and ground crews and real-time telemetry monitoring of critical parameters.
3. Large volumes of gathered flight data are processed and analyzed.
4. Certification and/or qualification tests are summarized in reports.

EDUCATION AND EXPERIENCE
- Bachelor's in Aerospace or Mechanical Engineering as a minimum
- Candidate must have flight test or aerospace design experience
- Rotary wing experience preferred.
 
Job Number: 17-702-1581
Job Location: Southeast
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
YL - COMPONENT INSTALLATION - Grade 07

Description:
COMPONENT INSTALLATION DESIGNER
The preferred candidate will possess a four year degree in an engineering discipline, either Mechanical or Electrical, 2000 hours CATIA design experience as well as 3 to 4 years’ experience in a design/manufacturing environment. The designer will work with a variety of engineering disciplines in a cooperative, Product Development Team format. Excellent written, oral and presentation skills as well as personal computer literacy using Microsoft Office products will be required. A working knowledge of MIL-W-5088 or AS50881 is desired.
Assignments in the Component Installation Section require the knowledge of Electrical/Mechanical drafting practices, geometric tolerancing, engineering mathematics, manufacturing practices as well as the ability to interpret equipment specifications and electrical schematics. Candidates will be responsible for the design and preparation of detail, assembly and installation drawings as required to define aircraft component and harness installations.
The candidate will tackle challenging assignments and develop unique solutions to rotorcraft Component Installation Design. Areas of design responsibility include electrical power system components, instrument panel and crew station design, antennas, lighting, airspeed systems, molded wiring assemblies and wire harness assemblies/installations.
LCA experience preferred.
 
Job Number: 17-762-1536
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Back to Advanced Job Search