Job Search Results

499 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2025/07/03 Thursday 06:34PM Pacific Time by ContractJobHunter. )

Listings 1 - 499

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aero Logistics Engineer

Description:
Job Description:

Aero Logistics Engineer focuses on the analysis and technical coordination to develop affordable and supportable military systems for the Company's aircraft. The position is responsible for supporting the development of support systems within the IPTs. These support system resources include:
* Level Of Repair Analysis (LORA)
* Reliability Centered Maintenance (RCM)
* Failure Mode Effect & Critical Analysis (FMECA) * Provisioning/Supply Support
* Task/Maintenance Plan Analysis
* Interactive Electronic Technical Manuals (IETM)
* Paper-based manuals
* Illustrated Parts Breakdowns (IPB)
* Support Equipment
* PHS&T
* Repair Parts and Special Tool List (RPSTLs)
* Industry MIL-STD documents and manuals, which span across multiple aircraft platforms, modifications, and development programs.
This position focuses on the design of inherent supportability into the analysis and the associated design, analysis and optimization of the customers' military support system.

Position Responsibilities:
1. Demonstrates a working knowledge and the requisite skill sets to work within the IPT/organization.
2. Performs all assigned tasks to an acceptable quality standard with minimal supervision.
3. Compliant to company processes, procedures, and applicable government regulations.
4. Support and assist in data preparation and presentation for program reviews and perform other work as directed.
5. Perform to a set of performance metrics and measurements that give visibility to cost and schedule objectives.
6. Performs other duties as required.

Qualifications:
Education Requirements:
- High School diploma - or equivalent - is required.
- Bachelor's Degree is preferred.

Position Requirements:
- Experience in Military logistics and/or experience in aviation logistics is preferred.
- Must have strong analytical skills
- Must be experienced with the MicroSoft software suite
- Must have excellent communication skills

Job Number: 132844
Job Location: Ft Worth, TX
Rate: $45.00
Per Diem: Possible
Overtime: Yes
Duration: 6-12 Months
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: GLOBAL TECH SERVICES
Attention: Kerry Moreland
Address: P O BOX 161127
3455 NE LOOP 820
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Lab Technician, Fort Worth, TX

Description:
Aerospace Instrumentation Lab Technician, Fort Worth, TX
JR-018955

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

Instrumentation Lab Technician (Aerospace Rotorcraft)

You Will :

• Report to the onsite Engineering Manager
• The Instrumentation Laboratory Technician is responsible for setting up, operation and maintenance of specialized instrumentation data acquisition systems.
• This includes the use of simple electronics equipment including ohmmeter and voltmeter. This includes wiring and soldering connections.
• He/she must possess technical skills for troubleshooting, maintenance and limited repair of low power DC circuits.
• Work on both metallic and Composite parts/ assemblies to fix strain gages and wiring for data collection
• There may be travel requirements for off-site testing which can last up to 8 weeks at a time. Also, candidate should
• Can work second shift if necessary.
•
You Will Need:
• Ability to solder and build cables, with knowledge of various connector types.
• Very good knowledge of strain gages, fixing them on surfaces such as Composite structures, metallic structures and pipes etc.
• Self-starter with demonstrated ability to work successfully in a team environment with customers and other disciplines
• Proficient to read and understand wiring diagrams for small project assembly
• Able to read and understand mechanical drawings
• Microsoft software suite applications such as Excel, Word, PowerPoint
• Good communication skills – oral and written.
• Physical strength -ability to lift up to 75 lbs , climb and work for extend periods in confined areas
•
Education: Associate Degree in Electrical / Electronics / Science / Mech. engineering (preferred), High School Diploma (required)

Years of Experience: Industry: Instrumentation / strain gage Installation / aerospace :5+ yrs
Required

Citizenship: US citizen

Skills & Experience
Soldering, Strain Gauging, Wire Harness Fabrication
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Instrumentation-Lab-Technician_JR-018955

Job Number: JR-018955
Job Location: Fort Worth, TX
Input Date: 06/10/2025

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Senior Composites Materials Test Engineer, Fort Worth, TX

Description:
Sr. Non-Metallic Materials Test-Engineer, Fort Worth, TX

JR-019392

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:

You will report to the onsite Engineering Manager. You will perform different Test Engineering tasks to support development, production, and use of advanced engineered composite materials on advanced aerospace vehicles for military, commercial, and innovation application.

You Will:

• Demonstrate advanced knowledge of materials, processes and the controlling specifications.
• Have experience in Composite Materials and processes.
• Have experience in bonding techniques, both metallic and composites.
• Demonstrate advanced skills related to drawing review and interpretation using CAD/CAM software
• Demonstrate advanced skills in using computerized drawing management system (ENOVIA)
• Write wide range of technical reports (IOMs, Test Requests, Destructive Test, Bonding Lab and Material Characterization Reports)
• Demonstrate expertise in Composites testing using Testing machine frames such as MTS or Instron.
• Demonstrate experience in Testing & evaluation of properties of composites by testing specimens in Compression, Tension, 3 - point bend testing, Three- and four-point flexure testing, Tensile testing of isotropic and orthotropic non-unidirectional fiber composites, Design Features laminate testing, Tensile testing of unidirectional carbon fiber reinforced composites, Testing laminates for in-plane shear response of polymer matrix composite materials, lap shear strengths of adhesive bonded single-lap-joints and double -lap joints, Testing of honeycomb sandwich constructed panels,
• Design test specimens for features testing, with discussions of design engineers, such as riveted joint specimens, Holed / notched specimens,
• Program machines (hydraulic or electrical Test frames) for software modifications of Test templates / creating new templates / new test processes. Keeping the OEM software updates and ensuring the upload’s performance. Statistical methods and materials
• Calibration of test machines / and troubleshooting /
• Well versed with test methods such as :
• ASTM D2344; ASTM D3039; ASTM D3410; ASTM D3518; ASTM D6641
• EN 2377; EN 2561; EN 2597; EN 6031
• ISO 14126; ISO 14129; ISO 14130; ISO 527-4; ISO 527-5
• Review and revise material and process coordinating with vendors to resolve issues.
• Provide recommendations to `wider range of shop production problems, coordinating directly with manufacturing and quality personnel.
• Gain familiarity with mechanical test equipment and learn to conduct simple static tests.
• Work with lab technicians to manage more complex test programs.
• Develop proficiency with vendor audits to conducts audits unsupervised, coordinating with Supplier Product and Quality personnel.
• Familiar with DMA test process.

You'll Need:

• Knowledge of Composites Materials and industry test standards for aerospace materials – SAE, ASTM , MIL Standards etc.
• Experience of Test machines – MTS required
• CATIA V5 or CATIA V6, ENOVIA
• MS Office, Word, Excel, Powerpoint, Outlook

Education: BS Mechanical Engineering or Aerospace Engineering - Required. (MS Mechanical Engineering or Aerospace Engineering preferred)

Experience : 10 years’ experience in an aerospace environment ( with non-metallic material lab environment preferred)

Citizenship: US citizen

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

Job Number: JR-019392
Job Location: Fort Worth, TX
Input Date: 06/10/2025

Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Technical Project Engineer

Description:
The project engineer is responsible for project estimating, planning, scheduling, cost tracking, and resource allocation. The successful candidate will have the ability to effectively drive a technical team through the appropriate mix of accountability and influence.

REQUIRED SKILLS:
Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
Aerospace full life cycle product development experience
Control Systems familiarity
Propulsion Engine familiarity
Scope Management experience
Work Breakdown Structure (WBS) familiarity
Earned Value Management (EVM) familiariy
Project Estimating experience
Project Planning experience
Experience Tracking Tasks in Accordance to Schedule
Experience Driving Tasks to Meet Milestones
MS Project experience
Ability to drive teams to success
Effective communication skills (both verbal and written)
Self-motivated, accountable, detail-oriented

PREFERRED:
Control Systems familiarity
Engine LRU familiarity

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: REAL TIME CONSULTING
Address: 22601 N 19TH AVE STE 114
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Fax Phone: 623/889-9201
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
A CNC Programmer job in Houston, Texas is currently available through Belcan with one of our Manufacturing clients. You will be responsible for setting up, programming, troubleshooting, operation of CNC and Manual Lathe and Mill machines. To be considered for this role, you will need a High School Diploma or GED and 8 to 10 years' experience programming, setting-up and operation of CNC and Manual Lathes and Mills. This is a great opportunity with a great company.

CNC Programmer Job duties:
* Program Lathes and Mills with Esprit CAM Software
* Formulate efficient operational programs that maximize machine utilization and product quality
* Complete and maintain program documentation and filing systems
* Verify program accuracy using simulations
* Responsible for coordinating with Manufacturing Engineer to update routers for part programs created or modified.
* Maintain responsibility for routers for part programs created.

Qualifications:
* High School Diploma or GED
* 8 to 10 years' experience programming, setting-up and operation of CNC and Manual Lathes and Mills.
* in-depth understanding of machining operations, (turning, boring, milling, drill & tap)
* Very knowledgeable with OSHA 1910 CFR required

If you are interested in this CNC Programmer job in Houston, TX, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 307060
Job Location: Houston, TX
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025

Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Analyst II

Description:
A Configuration Analyst II job in Broomfield, Colorado is currently available through Belcan. This is a contract role with one of Space clients. You will manage the configuration of the company's engineering and manufacturing products through the use of a Product Lifecycle Management (PLM) system. To be considered for this role, you will need to have a Bachelor's degree in Business Administration or related field of study and at least 3 years of relevant experience.

Configuration Analyst II Job duties:
* Coordinate, review and implement engineering design and documentation for the Structures and Electrical groups.
* Coordinate with design engineers and project managers to implement complex engineering designs and provide technical assistance in order to ensure accurate design documentation in a fast-paced environment.
* Define release structure and methods of projects.
* Create releases and review cad drawings, parts and bills of material to ensure adherence to quality standards.
* Manage execution of the release plan and communicate and coordinate project work with other departments.
* Monitor and coordinate the overall timing and flow of releases for projects ensuring that schedules are being met.
* Perform quality and accuracy audits of all activities involving the CM system.
* Provide leadership and direction for release maintenance, re-sequencing strategies and quality implementation.

Qualifications:
* Bachelor's degree in Business Administration or related field of study and at least 3 years of relevant experience
* Experience with PLM and PDM systems
* Experience with Windchill PLM and Cost Point ERP
* Experience using PDM/PLM systems such as Windchill, Enovia 3Dxperience software, and CAD tools such as SOLIDWORKS, Creo, NX, ProEngineer, AutoCAD, CATIA
* Documentation Control Experience
* Familiar with ISO 9001 requirements
* Change Management Experience
* Strong Problem Solving and Analytical Skills
* Effective Communicator
* Excellent Time Management Skills
* Microsoft Office
* Certification in Configuration Management disciplines (CM II or CM PIC would be desirable)
* The ability to obtain and maintain a Security Clearance may be required

If you are interested in this Configuration Analyst II job in Broomfield, Colorado, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 306808
Job Location: Broomfield, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deceleration Engineer

Description:
Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.

Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Hardware Design Engineer - Control System

Description:
This position is responsible for hardware electronic circuit design of Full Authority Digital Engine Control (FADEC) systems used for control of aircraft turbine engines.

REQUIRED SKILLS:
Bachelor’s degree in Electrical Engineering
5+ years Aerospace circuit design experience
Control systems hardware design experience
Engines/Propulsion, APU, or Flight Controls experience
Digital circuit design
Schematic capture
In-depth circuit analysis and simulation
Circuit board layout oversight
Familiar with requirements capture and management, and associated tools

PREFERRED SKILLS:
Engines/Propulsion product experience
Analog circuit design
EMI/HIRF/Lightning threat attenuation circuit design
Knowledge of DO-254 and its application in the development of complex systems hardware
Familiar with DOORS for engineering requirements management

THE FOLLOWING SKILLS WOULD BE A PLUS:
Experience developing DO-254 certification planning documents

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 mos
Start Date: ASAP
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Inconen is looking for a Electrical Test Engineer for our client, a well-known Aerospace Company, in Windsor Locks, CT.

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required

Job Number: 12457
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
Job Title: Electrical Test Engineer

Location: Windsor Locks, CT (06096)

Duration: 12+ months contract

Job Description:

This job is considered a sensitive position in accordance with NASA Guidelines. The selected candidate will be subject to drug and alcohol testing per NASA’s regulation subpart 1823.5 Drug-Free Workforce

Job Duties:

Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
Involve in testing, data analysis, and interface with all aspects of the engineering department.
Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.
Typical Duties:

Support laboratory testing of Space hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve testability concerns.
Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should include working on the testing of electrical systems and components such as motor controllers, actuator controls, & system controllers.
Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required.
Ability to proficiently operate common Microsoft Office software products is required.
This is a 'safety-sensitive' position as prescribed by NASA. Special drug testing/training needed, and inclusion in the random drug/alcohol program required.
This is a Safety Sensitive position. Will accept someone with 2+ years experience up to and including 25+ years experience. Pay should be commensurate with experience.
US Citizen candidates only

Education: Bachelor's Degree

All leased labor are subject to a 10 panel drug test. The FAA Drug & Alcohol program is a special program requiring an additional 5-panel drug screen with training prior to starting their assignment
Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.

Job Number: 59133
Job Location: Windsor Locks, CT
Per Diem: No
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD
City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer

Description:
Inconen is looking for a Facilities Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Job Description:
Plans, designs and oversees the reconfiguration, maintenance, and alteration of equipment, machinery, buildings, structures, and other facilities. Gathers and reviews data concerning facility or equipment specifications, company or government restrictions, required completion date, and construction feasibility. Coordinates with architecture/engineering firms in developing design criteria and preparing layout and detail drawings. Prepares bid sheets and contracts for construction and facilities acquisition. Reviews and estimates design costs including equipment, installation, labor, materials, preparation, and other related costs. Inspects or directs the inspection of construction and installation progress to ensure conformance to established drawings, specifications, and schedules.

Accountabilities:
• Safety & security of facilities and construction activities (≈25%)
• Facility & project budgets, service contracts and business controls (≈25%)
• Architectural/Engineering design, construction, renovation, maintenance, and repair activities (≈25%)
• Internal/External customer and vendor relationship management (≈25%)

Essential Duties:
As a Facilities Engineer, you will lead a design, construction, renovation, maintenance, and repair project portfolio for office, lab, and manufacturing buildings of over 1 million square feet. Portfolios are typically less than $7m with individual projects ranging from about $50k to $2m in value.

Primary job scope includes:
The Facilities Engineer reports directly to the RMS TLS Associate Manager, Facilities Engineering. Major responsibilities include, capital and expense planning, programming, budgeting, consistent with completion of construction projects to support customer and infrastructure, repair, replacement, and modernization. Additional responsibilities include facility maintenance, operations, and quality assurance of building service contracts. The successful individual works with a team of engineers and construction professionals supporting RMS owned or leased sites.
Ensure compliance with federal, state and local environmental, health, and safety regulations. Audits contractor safety programs. Provides daily field presence and interaction with contractors. Supports planning of critical activities. Ensures safety concerns are captured, response is timely and adequate. Sets expectations for and facilitates incident and near-loss incident reporting. Leads investigation for significant incidents. Determine root cause and implement corrective actions.
Builds capital/expense budgets, schedules, and identifies resources to fulfill customer and facility needs. Ensures deliverables conform to agreements and certifies invoices match against commitments. Develops forecasts of expenditures at completion, year-end actuals, explains deviations from capital/expense spend plans, and makes recommendations for adjustments. Works with staff and contractors to proactively capture and report cost savings. Ensures total cost of ownership is considered.

Learns and complies with business policies, established business controls, and procedures. Analyzes project & facility performance, researches trends/benchmarks, and makes recommendation to achieve key results.

Meets with tenants to identify and refine requirements. Develops and executes projects through contracted design-build or design-bid-build project delivery methods. Directs construction projects including safety, quality, cost control, project schedule, and contract administration. Oversees contract scopes of work (SOW) and evaluates contractor performance.

Leads development of design and installation specifications along with commissioning plans and oversees final check out of new installations. Develops criteria for and evaluation of equipment and service providers.

Identifies and eliminates asset failures through risk-based asset management. Defines, develops, monitors and refines asset maintenance plans including value-added preventive maintenance and effective utilization of predictive and other non-destructive testing to enhance plant reliability.

Establishes and maintains strong working relationships with internal & external customers including: Tenants/Customers, Finance, Procurement, Property management, Project Managers, Maintenance organization, associated contract supervisors and counterparts.

Uses Microsoft Excel spreadsheets, Procure to Pay (P2P) - SAP, Microsoft Word, Microsoft PowerPoint software, Integrated Workplace Management Systems (IWMS) - Tririga, and Microsoft project management software to successfully complete daily responsibilities.

Critical Skills:
• Integrity, strong moral compass, ability to do what is right.
• Excellent interpersonal skills, successful in a team environment, demonstrates respect for others.
• Achieves excellence, maximizes positive outcomes, disciplined approach to prioritizing & managing own work.
• Ability to communicate complex data clearly and succinctly to key decision makers.
• Executing budgets within authorization by fiscal year end. Demonstrates ownership of financial outcomes
• Ability to multitask, resolve ambiguity, and deliver results under time constraints.
• Commitment to realizing cost efficiencies and driving process improvement

Basic Qualifications:
• Bachelor’s degree in Architecture, Engineering, Construction Management or closely related field from an accredited institution
• Five years of experience managing subcontracted architectural/engineering design and construction services.
• Five years of experience developing and managing capital and expense budgets.
• Knowledge of design-bid-build, design-build construction, commissioning, and physical plant operations.
• Understanding of building codes, permitting, and professional liability.
• Integrated Workplace Management System(IWMS) and project scheduling software proficiency
• Basic computer aided design skills
• Intermediate knowledge of Microsoft Excel, Word, and PowerPoint software
• Ability to develop and foster internal customer relationships.
• U.S. Citizen with ability to obtain Secret clearance

Desired Qualifications:
• Master’s degree in Architecture, Engineering, Construction Management or closely related field from an accredited institution
• Certified Project Management Professional, Construction Manager, or closely related credential
• Integrated Workplace Management System(IWMS) - Tririga, and Microsoft Project software proficiency
• Revit or AutoCAD proficiency

Job Number: 12633
Job Location: Orlando, FL
Rate: $34.00 - $46.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 Mos
Start Date: ASAP
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Operations Test Dispatcher

Description:
Position Purpose:
Note: This position description addresses two separate Flight Operations Test Dispatcher I roles Demonstration or Test. Some duties, responsibilities and requirements are identical others are different. The differences are defined by using either the term Demonstration or Test for the affected duties, responsibilities or requirements.
Demonstration: Under moderate supervision, dispatch and schedule corporate aircraft and flight crew to effectively meet company goals. Serve as the central point of contact for flight operations, coordinating communication between Sales and Marketing, service centers, corporate offices, customers, flight crew, accounting, and maintenance departments.

Test: Under moderate supervision, dispatch and schedule flight test aircraft or flight operations experimental, initial phase, final phase and service center aircraft and flight crew to effectively meet company goals. Serve as the central point of contact for worldwide flight test operations, coordinating communication between, initial phase, final phase, service centers, corporate offices, sales, customers, flight crew, accounting, and maintenance departments.

Principle Duties and Responsibilities:

Essential Functions: 1. Dispatches aircraft in accordance with FAA regulations and company defined policies - (Demonstration: For the purpose of sales demonstration, corporate transportation, and product support. Test: For the purpose of experimental flight test, production and completion flight test, and product support.) 2. Schedules aircraft, flight crew, and maintenance to build the most efficient flight schedule possible while determining the technical and logistical feasibility of each request. 3. Manages all aspects of international trip planning and logistical arrangements for aircraft and flight crew. 4. Develops and maintains working relationships with an assortment of internal and external customers. 5. Calculates various flight factors such as weather, runway performance, airport curfews, weight and balance issues, distance, and fuel needs to create and/or update flight plans. 6. Plans and coordinates the use of contract services (i.e., contract crews, charter aircraft) to meet corporate requirements. 7. Monitors the progress of dispatched aircraft advising management of significant issues or flight delays. Perform other duties as assigned.

Other Requirements: 1. Practical experience with aircraft scheduling and flight planning software. 2. Prior experience in a military or civilian flight operation department.

Job Number: 132963
Job Location: Savannah, GA
Rate: $34.00
Per Diem: Possible
Overtime: Yes
Duration: One Year
Start Date: ASAP
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Ops Test Dispatcher

Description:
This position description addresses two separate Flight Operations Test Dispatcher I roles, Demonstration or Test. Some duties, responsibilities and requirements are identical others are different. The differences are defined by using either the term “Demonstration” or “Test” for the affected duties, responsibilities, or requirements.

Demonstration: Under moderate supervision, dispatch and schedule corporate aircraft and flight crew to effectively meet company goals. Serve as the central point of contact for flight operations, coordinating communication between Sales and Marketing, service centers, corporate offices, customers, flight crew, accounting, and maintenance departments.

Test: Under moderate supervision, dispatch and schedule flight test aircraft or flight operations experimental, initial phase, final phase and service center aircraft and flight crew to effectively meet company goals. Serve as the central point of contact for worldwide flight test operations, coordinating communication between, initial phase, final phase, service centers, corporate offices, sales, customers, flight crew, accounting, and maintenance departments.

Education and Experience Requirements
Associate's Degree required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 3 years experience with international air transportation operations.

Principle Duties and Responsibilities
• Dispatches aircraft in accordance with FAA regulations and company defined policies - (Demonstration: For the purpose of sales demonstration, corporate transportation, and product support. Test: For the purpose of experimental flight test, production and completion flight test, and product support.)
• Schedules aircraft, flight crew, and maintenance to build the most efficient flight schedule possible while determining the technical and logistical feasibility of each request.
• Manages all aspects of international trip planning and logistical arrangements for aircraft and flight crew.
• Develops and maintains working relationships with an assortment of internal and external customers. 5. Calculates various flight factors such as weather, runway performance, airport curfews, weight and balance issues, distance, and fuel needs to create and/or update flight plans.
• Plans and coordinates the use of contract services (i.e., contract crews, charter aircraft) to meet corporate requirements.
• Monitors the progress of dispatched aircraft advising management of significant issues or flight delays. Perform other duties as assigned.

Other Requirements
• Practical experience with aircraft scheduling and flight planning software.
• Prior experience in a military or civilian flight operation department.

Job Number: 24-452
Job Location: Savannah, GA
Rate: $33-$36/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: PRECISION PERSONNEL INC
Attention: Brandon Ferguson
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Inconen is looking for a Mechanical Engineer for our client, a well-known Aerospace Company, in Brea, CA.

**Candidates must be a U.S. Citizen**

Job Description:
1. Mechanical Engineer will manage deliveries of mid to high level complexity research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
2. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Primary Responsibilities:
1. Duties include the interpretation/analysis of customer test requirements, subsequent cost estimates to support test programs.
2. Design, implement, and maintain test processes for Hoist and Winch hardware using lean philosophies and techniques.
3. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
4. This can involve testing, data analysis, and interface with all aspects of the engineering department.
5. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
6. Responsibilities also include daily interface with VSL's, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of hoist and winch hardware.
2. Develop and validate tooling, test equipment designs (test harnesses, test boxes and acceptance test stands).
3. Author and maintain operation/test procedures (QTP, ATP) and reports.
4. Preparation of standardized operation/test Device Under Test.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve testability concerns.
8. Support customer communication and travel to external sites to conduct testing as needed.

Experience/Qualifications:
1. Candidates for this role should possess a Bachelor’s degree in Mechanical Engineering.
2. Experience with advanced instrumentation and data acquisition systems is required.
3. Knowledge of NI test hardware and Lab VIEW is preferred.
4. Experience should also include 3+ years working on the testing of electromechanical/mechatronic systems and components such as motor controllers, actuator controls, & system controllers.
5. Experience with executing D0-160 & MIL-STD-810 qualification programs.
6. Capability of working independently and is self-motivated.
7. Excellent communication skills, written and verbal are required.
8. Ability to proficiently operate common Microsoft Office software products is required.
9. Experience with reading, creating and improving technical documentation (drawings, CAD models, test procedures).
10. CAD tools (Solid works/ NX) experience preferred.

Job Number: 12605
Job Location: Brea, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Numerical Control Programmer

Description:
• Provides numerical control, machining and programming technical experience.
• Establishes technical requirements for manufacturing and producibility.
• Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for a complete spectrum of numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work.
• Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment.
• Works under general direction.
• Education/experience typically acquired through advanced education (e.g. Associate) and typically 3 or more years' related work experience or an equivalent combination of education and experience (e.g. Bachelor+1 years' related work experience, 5 years' related work experience, etc.).
• UG/NX is a must, CATIA is a plus.

Job Number: NC-CA
Job Location: Huntington Beach, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: INNOVA SOLUTIONS, INC
Attention: Dheeraj Rai
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
I have several positions available in Louisville, CO for Quality Engineers.

Quality Engineer III - Precision Measurement (CONTRACT Rate - $55-$58/hr.)
Must-haves:
• Bachelor's degree in a related Engineering discipline and at least 6 years of relevant experience
• Working knowledge of Faro Arm, Laser Scanner, Handi-Scan and Spatial Analyzer software
• Knowledge of Quality System requirements and contract quality requirements
• Experience in manufacturing and inspection
• Ability to read and interpret technical drawings and schematics, parts lists, specifications, instructions and test procedures
• Knowledge of SO9001, AS9001 standards

Quality Assurance Engineer Sr. (Contract Rate - $60/hr.)
Must-haves:
• Bachelor's degree in a related Engineering discipline and at least 10 years of relevant experience
• Experience with GD&T, machine shop processes, and fasteners
• Knowledge of Quality System requirements and contract quality requirements
• Experience in manufacturing and inspection
• Ability to read and interpret technical drawings and schematics, parts lists, specifications, instructions, and test procedures
• Knowledge of SO9001, AS9001 standards

Job Number: t3265
Job Location: CO
Rate: 55-60 hr
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer III - Precision Measurement

Description:
Responsibilities:

Develop Inspection work instructions for precision measurement on aircraft sized product, defining steps, datum selection and location , and measurement, documentation and tolerance evaluation of Engineering Drawing requirements

Monitor and verify accuracy and consistency of setups to address; thermal affect and structural movement

Authority for interpretation of Geometric Dimensioning and Tolerancing.

Feeding inputs into production schedule on planned inspections

Generates time standards and resource plans for needed inspection resources Authority for acceptable errors for inspection and fit reliability assessments to verify requirements are met

Responsible for digital inspection training/qualification/operation procedures Coordinates inspection of critical tooling re-validations

Responsible for equipment acquisition and software coordination and planning

Monitor industry for latest releases, new technology

Serves as authority for inspection review and data analysis

Expert in the inspection software and tools utilized

Must-haves:

Bachelor's degree in a related Engineering discipline and at least 6 years of relevant experience

Working knowledge of Faro Arm, Laser Scanner, Handi-Scan and Spatial Analyzer software

Knowledge of Quality System requirements and contract quality requirements

Experience in manufacturing and inspection

Ability to read and interpret technical drawings and schematics, parts lists, specifications, instructions and test procedures

Knowledge of SO9001, AS9001 standards

Preferred:

Experience in the aerospace and defense industry

The Structures Company is an AA/EOE.

Job Number: 433
Job Location: CO
Rate: $55-$58/Hr. ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 6 Month - CtoH
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Systems Specialist

Description:
• Must have experience with either MM, or CMM machine experience.
• Must have Romer, or Faro Arm equipment experience.
• Must have experience with either Verisurf, Catia, or Polyworks software (Verisurf is preferred).
• Must have experience with GD&T Y14-5 principles to conduct 3D inspections on composite and metallic parts (mostly composite). Will be inspecting hole locations, diameters, planes and geometric dimensions.
• Team player, willingness to learn and flexible to move from job to job
• Must have minimum high school diploma and 5 years with CMM or MM experience
• Any aerospace company would be a plus

The Structures Company is an AA/EOE.

Job Number: 432
Job Location: MS
Rate: ***DOE***
Per Diem: Possible
Duration: 6+ Month CONTRACT TO HIRE
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will take customer requirements for an aerospace fluid control component and create a viable design solution that can be carried through all phases such as design, development, testing and manufacturing. To be considered for this role, you will have a B.S. Degree in Mechanical or Industrial Engineering along with a minimum of five years of experience designing fluid control components like Valves, Regulators and Pressure Vessels.

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Design Engineer Job Responsibilities:
* Complete new projects from creation of proposals through development, qualification, and production support
* Determine feasibility of designs considering costs, time limitations, and technical factors
* Apply engineering principles to design, develop, or modify new or existing products
* Conduct analytical studies on engineering proposals to develop design for products
* Analyze test data and reports to determine if design meets functional and performance specifications
* Prepare or directs preparations of component layouts and detailed drawings
* Plans and develops experimental test programs
* Prevent or eliminate defects in new or existing products

Design Engineer Job Requirements:
* B.S. in Mechanical or Industrial Engineering or the technical equivalent
* Minimum of five years of hands-on experience designing fluid control components like Valves, Regulators and Pressure Vessels for the aerospace industry
* Experience with AutoCAD and SolidWorks software is a must
* Project engineering and communication skills
* Ability to perform in a fast paced, 'hands-on' environment
* An Advanced Degree is preferred
* Hands-on experience with software like ANSYS, MathCAD, Solid Works, Pro-E or equivalent is desired
* Understanding or Six Sigma/Lean Manufacturing techniques and methods is desired

If you are interested in this Design Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

Job Number: 303447
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025

Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electrical Wire Designer - Aerospace

Description:
Senior Electrical Wire Designer proficient with Siemens Capital Wire Design software to create Capital Logic diagram designs and Capital HarnessXC harness designs in support of a military helicopter program. US persons only. Ability to work independently and remotely is required.

Job Number: EWD-001
Job Location: Remote Work, Any
Rate: $80/hr
Per Diem: No
Overtime: Possible
Duration: 4-6 mos
Start Date: December
Input Date: 06/10/2025

Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Software Engineers (Level 3)

Description:
STS Technical Services is hiring Senior Software Engineers (Level 3) in Dallas, Texas.

Summary:
The senior embedded Software Engineer will be an integral part of our Electro Optical Infrared System (EOIS) Software Development Team.
Responsible for leading technical activities and completion of these activities on time and budget.
Develop embedded software and PC tools including operating systems, compilers, routers, networks, utilities, databases, and Internet-related tools.
Determine hardware compatibility.
Complete documentation and procedures for installation and maintenance.
Interact with users to define system requirements and/or necessary modifications.
Ability to lead a technical project independently.
Basic Qualifications & Skills:
Bachelor’s Degree in Computer Engineering, Computer Science, or related engineering technical field with a minimum of 5 years of experience
3+ years of real time embedded SW design experience
Demonstrate experience with Real Time Operating Systems (RTOS), and have experience in bare-metal implementation for embedded system
Experience with embedded device drivers (TCP/IP, UART, I2C, PCIe, etc.) preferably on Linux
Solid understanding of multi-threading/multi-processing; concepts and implementations
Strong development experience in C or C++ (3+ years)
Proficient with Microsoft Office, including MS PowerPoint, MS Word and MS Excel
Motivated, self-starter individual
Desired Skills:
Experience in initial hardware start-up and troubleshooting techniques
Familiarity with oscilloscopes and logic analyzers
Strong analytical and communication skills
Capable of integrating hardware and software and developing test plans and procedures
Lead and direct the work of others as assigned
Experience with modern software development processes, including software configuration management tools, defect tracking tools, peer review, and agile development life cycles.
Essential Duties:
Supports and participates in technical activity
Designs, develops, analyzes, documents and supports testing of products, systems or subsystems
May use computer-aided engineering or other design/analysis software in the performance of assignments
Ability to work independently under supervision of others
Provides regular reporting of progress and status
Responsible for completion of assigned task on time and meeting technical requirements
Reviews customer specifications and requirements, and under direction develops designs to best support them, including cost as a key design variable
Supports the program design to cost and design for manufacture requirements
Develops prototypes to retire key development risks as directed
Communicates clearly (written and oral) with other company personnel and the customer as required
Supports, communicates, reinforces and defends the mission, values and culture of the organization
Other duties as assigned
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.

Job Number: 35738
Job Location: Dallas, TX
Input Date: 06/10/2025

Firm Name: STS AEROSTAFF SERVICES
Attention: Patrick McMenimen
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Certification Engineer - Verification Tool Qual Planning

Description:
This position is responsible for developing the Tool Qualification Plan for a new verification environment that will be utilized to verify Level A Software in accordance with DO-330 and DO-178C.

REQUIRED SKILLS:
Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
Aerospace Design Assurance Level A (DAL A) software development and verification experience
Proficient in DO-330 and its application in qualification of software verification tools
Experience developing Software Tool Qualification planning documents

PREFERRED SKILLS:
Engines/Propulsion product experience
Control System product experience
Knowledge of DO-178C Level A (DAL A) and its application in the verification of complex systems software
Experience executing Software Tool Qualification in accordance with DO-330

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Companies, LLC is the parent company to multiple entities, of which Real Time Consulting is the current focus, specializing in providing experienced engineering services to several large aviation companies since 1997. Our engineering staff has an average of 20+ years of direct industry experience and we pride ourselves on both the quality and performance of our staff.

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: StTm/OT
Duration: 12 weeks
Start Date: ASAP
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Development Engineer - Control System

Description:
This position is responsible for design of Full Authority Digital Engine Control (FADEC) software used for control of aircraft turbine engines.

REQUIRED SKILLS:
• Bachelor’s degree in Computer Science or Electrical/Computer/Aerospace Engineering
• 5+ years Aerospace Engineering experience
• Controls systems software development
• Engines/Propulsion, APU, or Flight Controls experience
• Knowledge of DO-178B/C Level A (DAL A) and its application in the development of complex systems software
• Software architecture experience
• Expert in translating software requirements to C language code
• Experience in design and code traceability
• Familiar with requirements capture and management, and associated tools
• Familiar with Software Change Request (SCR) processes and tools
• Familiar with software configuration management processes and tools

PREFERRED SKILLS:
• Engines/Propulsion product experience
• Familiar with DOORS for engineering requirements management
• Familiar with ClearQuest for management of SCRs
• Familiar with ClearCase for software configuration management
• Familiar with Rhapsody design modeling
• Experience with derived requirement impact dispositions

THE FOLLOWING SKILLS WOULD BE A PLUS:
• Experience developing DO-178B/C certification planning documents

Apply to this job or any of our other openings at https://realtime.catsone.com/careers/

ABOUT THE COMPANY:
Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients’ success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee’s innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!

This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.

RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.

Job Location: Phoenix, AZ
Rate: Open
Per Diem: No
Overtime: Straight Time
Duration: TBD
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: REAL TIME CONSULTING
Attention: Kathy Heath
Address: 22601 N 19TH AVE STE 114
City, State: PHOENIX, AZ 85027
Phone: 623/792-8946
Fax Phone: 623/889-9201
Website: www.real-time-consulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Bachelor's degree in Computer Engineering, Software Engineering or Computer Science. U. S. Citizen with ability to acquire DOD secret clearance. Agile processes and practices C++ Ability to work with multi-disciplined teams Embedded Software Full software life-cycle development Hardware/Software (HW/SW) integration Linux Real-time software Software configuration management Windows

Job Number: 49128
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers - Many Needed - Active Secret

Description:
**Must have Active Secret Clearance
Communications and/or Datalink Software Development, ADA Language, SATURN/SINCARS, Communications/Datalink bus development

Acts as a SME to develop, document and maintain complex architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system.

Email resume to: mmccarthy@pdstech.com

Job Number: Bo-Ok- Saturn
Job Location: Oklahoma City, OK
Rate: $90.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Advanced Systems Engineer

Description:
A Sr. Advanced Systems Engineer job in El Segundo, CA is currently available through Belcan. In this role, you will be responsible analyzing, designing, developing and testing company systems to ensure the integration of software, hardware, reliability, maintainability, safety and other requirements in the total engineering effort. To be considered for this role, you will have a Bachelor's degree in Systems Engineering, or a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Top Secret security clearance is required at the time of hire.

Sr. Advanced Systems Engineer Job duties:

* Formulating operational concepts; performing mission, functional, cost-benefit and risk analysis.
* Select systems architecture.
* Prepare specifications for operating systems to ensure designs meet applicable security specifications.
* Document security on both new and fielded information systems.
* Provide accreditation/certification evaluation and test support to ensure all technical security features are considered and functioning properly.

Qualifications:

* Experience in SIGINT and Space Payloads.
* Experience with Digital Signal Processing (DSP) techniques.
* Experience conducting signal analysis on space high reliability products.
* Knowledgeable of ASIC/FPGA design process.

If you are interested in this Sr. Advanced Systems Engineer job in El Segundo, CA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

Job Number: 306236
Job Location: El Segundo, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025

Firm Name: BELCAN TECHSERVICES
Attention: DavidDunham
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
Must-haves:
• Bachelor's of Science degree in Electrical Engineering or other related discipline and typically 10 or more years of relevant experience
• Demonstrated knowledge of engineering principles and practices
• Experience with Computer Aided Engineering tools
• Progressive experience working in multi-disciplinary design and development teams
• Must demonstrate the ability to consume / import Siemens Mentor Graphics Capital data / intelligence into Siemens NX11 for the purposes of routing bundles
• Must demonstrate the ability to route bundles in NX11 and implement cable management hardware and devices
• Must demonstrate the ability to export CAD derived cable lengths back into Mentor Graphics Capital Logic

Preferred:
• Exposure to simulations through functional and logical models and system analysis
• Background in the Aerospace and Defense Industry
• Experience using SOLIDWORKS, Creo, NX, ProEngineer, AutoCAD, CATIA or Enovia 3Dxperience software
• Working knowledge of ASME and Government standards
• Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysis
• Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightening (IEL)
• Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processes
• Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
• Experience in digital or analog circuit design and schematic capture
• Understanding of the printed circuit board layout process and tools
• The ability to obtain and maintain a Security Clearance may be required

The Structures Company is an AA/EOE.

Job Number: 419
Job Location: CO
Rate: $50-$62/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: CtoH
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration / Test Engineer

Description:
Inconen is looking for a Systems Integration / Test Engineer in for our client, a well-known Aerospace Company, in Fort Worth, TX.

**Candidates must have an Active Secret Clearance or to have had one within the last 2 years**
** Ideal candidate will have F-35 Domain knowledge, modeling and simulation domain knowledge, will know system engineering life cycles & principals and know how to apply it. MBSE, AGILE, DIMENSIONS and DOORS experience is ideal and highly preferred.**

Job Description:
1. Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems.
2. Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
3. Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
4. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
5. Coordinates subsystem and/or system testing activities with programs and other organizations.
6. Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
7. Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS

Job Number: 12560
Job Location: Fort Worth, TX
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 06/10/2025

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer Level 3

Description:
***Minimum 5 years experience with the Acculogic FLS980 flying probe is mandatory***
Travel: approximately 20% to Lufkin, TX
Analyze complex electronic devices and circuitry to design automated card level test equipment (ATE) focused on Acculogic FLS980 Flying Probe tester, establish hardware and software test requirements, design and document ATE, integrate ATE software and hardware, and demonstrate ATE work product completion. Must be interested in working with both hardware and software, must be able to complete tasks per established schedule, and must have strong writing and communication skills. Job requires ability to acquire a secret security clearance.

REQUIRED SKILLS:

Acculogic FLS980 Flying Probe Test Development experience, Xmatic circuit card translation, circuit card flying probe carrier design, Microsoft Office applications, strong writing and communication skills

Skill/Experience/Education
Mandatory
Acculogic FLS980 Flying Probe Test Development experience, Xmatic circuit card translation, circuit card flying probe carrier design, Microsoft Office applications, strong writing and communication skills * Current Active Secret or Ability to Obtain

Desired
Desired Skill: Bachelors degree in Engineering.
Desired Skills Powered testing development on Flying Probe tester, Acculogic Flying Fixture experience, Boundary Scan (JTAG) test development Optional Skills Agilent 3070 Test Development, TestSight CAD translation, CKT1175 programming, Perl Specific

Job Number: 2901
Job Location: Grand Prairie, TX
Rate: 85.00
Per Diem: Possible
Overtime: Possible
Duration: 9 months
Start Date: ASAP
Input Date: 06/10/2025

Firm Name: GLOBAL TECH SERVICES
Attention: Steven Austin
Address: P O BOX 161127
3455 NE LOOP 820
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Software Engineer

Description:
A Test Equipment Software Engineer position in Atlanta, GA is currently available through Belcan. In this role, you will be responsible for the design and automation of test and measurement systems for testing and characterization of complex military avionics displays. In addition, the position will include collaboration with other scientists, engineers, and management to analyze test data, generate visualizations, and create reports. To be considered for this role, you will have a Bachelor's Degree, minimum 9 years of prior relevant experience and certified in LabVIEW & TestStand. This is a very visible, contract to hire opportunity with a growing company and has excellent upward mobility.

JOB TITLE Job duties:
* Develop special test equipment (STE) software design specifications and test requirements
* Conduct preliminary design review of STE software design architecture
* Identify STE hardware and software required to meet specification requirements
* Identify and develop documentation that defines communication protocols from STE to device under test
* Develop STE software architecture requirements that provide a hardware abstraction layer for lower level interfaces with commercial and custom hardware defined in the STE specifications.
* Conduct critical design review of STE software design architecture

Qualifications:

* Bachelor's Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience
* National Instruments CLA/CTA experience using NI tools (LabVIEW, TestStand) , PXI chassis and 3rd party, box-level hardware.
* Works with other disciplines to support goals of the business. Possesses foresight in identifying future problems and proposes potential solutions to the team (proactive).
* Background in a military electronics manufacturing environment (Preferred)
* Strong Office tool skills along with a general instrumentation hardware and software knowledge.
* Ability to obtain Secret security clearance

If you are interested in this Test Equipment Software Engineer position in Atlanta, GA, please apply via the 'apply now' link provided. Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

Job Number: 306256
Job Location: Alpharetta, GA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025


Back to Advanced Job Search