Job Search Results

190 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/12/11 Tuesday 09:30PM Pacific Time by ContractJobHunter. )

Listings 1 - 190

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog Design Verification Engineer

Description:
Job Description:
Our Client is seeking an individual to perform analog verification and research of advanced analog mixed signal integrated circuit blocks. The applicant must be familiar with analog, RF and mixed signal design/fabrication and the associated EDA design tools. Other duties may include designing test articles to evaluate security principles. The selected applicant will represent our Client and DoD customers in outside discussions and technical forums. This position will require some travel. The selected candidate will meet eligibility requirements for a DoD a security clearance.

Required Skills & Experience
An MS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required. A strong understanding of design principles, parasitic interactions, and post-fab test is required.

Desired Skills and Experience
Additional experience in digital circuit design is desired.
Familiarity with advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is desired.
Familiarity with at least one (1) commercial scripting programming language such as PERL or Python is desired.

Special Requirements/ Certifications:
Candidates must be a U.S. Citizen
Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs 
Must be eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.
 
Job Number: 18-12268
Job Location: Dayton, OH
Rate: OPEN
Per Diem: Split
Overtime: POSSIBLE
Duration: 3 Month Contract-TO-Hire
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/10/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Design Engineer

Description:
Project Overview:
Our global deployment of custom-designed machines has created one of the largest and most powerful computing infrastructures in existence: cutting-edge innovation on a huge scale. Our Technical Infrastructure teams design, build, and operate the software, hardware, computing platform, and networking technologies that power all of Google's services. As our operations continue to grow, its becoming ever more important to automated our infrastructure for deploying and operating at scale. We have developed a portfolio of automation projects that span manufacturing, supply chain, and datacenter operations.
We are looking for motivated professionals with experience designing complex automated systems in CAD. From component level detail to factory layout and optimization.
Overall Responsibilities:
You will work with our Datacenter Automation Systems team to define product specifications for robotics, autonomous vehicles, and material handling systems. Convert those specifications to virtual models in Solidworks, Autodesk, or ProE computer aided design software. Generate design details and schematic drawings from the virtual models for contracting from our supply base. Test and measure components and systems to ensure they meet design standards.
Top 3 Daily Responsibilities:
• Work with senior engineering staff to define product specifications,
• Use CAD software such as AutoCad,Inventor, Solidworks, or ProE to design building scale automation systems, components, robotic work cells
• Document design details and make schematic drawings for contracting components from suppliers.
Required Skills:
• B.S. ideally in Mechanical Engineering (or equivalent) or minimum 10+ years professional experience in CAD Design
• Without a degree, ideal candidate would be with trade certification in certified Solidworks professional (CSWP) or expert (CSWE)
• Solidworks, Autocad, Creo/ProE computer aided design systems
• Layout planning and optimization
• Geometric Dimensioning and Tolerancing
Nice to have skills/Not Required:
• Minimum 2+ years developing robotic, mechatronic, or material handling systems in a field related to manufacturing or logistics
• Certification: CSWA, CSWP, CSWE, CPPA, ACP
• Controls systems
• Statistical modeling
• Understanding Robot kinematics and Work Envelope
• Material control dynamics and principles
• Rate and systems throughput modeling
 
Job Number: 385909
Job Location: Kirkland, WA
Input Date: 04/10/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Specialist

Description:
Description:


AS Degree/Certification in Design or Engineering Technology or related field. CATIA V5 (8+ years experience or 16,000 hours of CATIA). Workbenches: GSD, FTA, part design. Drafting exposure to various technologies as required by the dept. specialty area (stamping, injection molding, forging, casting, etc.) which shall include: Forming requirements, tooling requirements, cost drivers. Ability quickly to adapt to new tools and processes so as to enable efficient vehicle development. Assist design engineer(s) by making recommendations with consideration towards manufacturing feasibility by considering form-ability. Create layouts and part geometry based upon requests, requirements or the direction of the design engineer PIC for the part.
 
Job Number: NSR10007CAD
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 03/30/2018
Last Updated: 05/04/2018
Firm Name: NSR GROUP
Attention: Mariko Akiyama
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Design Engineer - Level 3

Description:
Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Duration: 6 month contract
Shift: Regular 40 Hour Work Week – OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Creo design experience is required **
** GD&T experience is required (geometric dimensioning and tolerancing per ASME Y14.5) **
** PLM system experience is required. Windchill strongly preferred **

- Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements.
- Applicant must have prior turbomachinery design or development experience.


Requirements:
- Proficient experience using CREO 2.0 CAD System
- Experienced user of Windchill PLM System or similar
- Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
- Excellent experience in the creation of mechanical engineering drawings
- 9+ Years of related Aerospace Industry experience


Skills:
- Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and proficient use of Windchill PLM System.
- Advanced surfacing and modeling skills preferred.
- Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M.
- Ability to create mechanical engineering drawings, and related specifications.
- Ability to write clearly and concisely.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Knowledge of design practices, manufacturing techniques and inspection requirements.
- May require the use of various computer systems to produce data, analysis and reports.


Education:
- Bachelor’s or Master’s degree in an appropriate engineering discipline.
- Rocket propulsion design experience preferred.
 
Job Number: 8775
Job Location: Huntsville, AL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/16/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Design Engineer - Level 3 AL

Description:
161674/7807767
Job Title: CREO Design Engineer - Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Creo design experience is required **



** GD&T experience is required (geometric dimensioning and tolerancing per ASME Y14.5) **



** PLM system experience is required. Windchill strongly preferred **



Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
Develop design layouts, engineering drawings, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements.
Applicant must have prior turbomachinery design or development experience.




Requirements:

Proficient experience using CREO 2.0 CAD System
Experienced user of Windchill PLM System or similar
Working knowledge of ASME Y14.5M geometric dimensioning and tolerancing.
Excellent experience in the creation of mechanical engineering drawings
9+ Years of related Aerospace Industry experience




Skills:
Must be an experienced and proficient Creo 2.0 CAD designer. Position requires experience and profecient use of Windchill PLM System.
Advanced surfacing and modeling skills preferred.
Strong working level knowledge of geometric dimensioning and tolerancing per ASME Y14.5M.
Ability to create mechanical engineering drawings, and related specifications.
Ability to write clearly and concisely.
Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
Knowledge of design practices, manufacturing techniques and inspection requirements.
May require the use of various computer systems to produce data, analysis and reports.






Education:
Bachelor’s or Master’s degree in an appropriate engineering discipline.
Rocket propulsion design experience preferred.

Skills:
Required
CREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGAEROSPACE DESIGN
Additional
PDM/WINDCHILL

State/Province: Alabama
City/Town: Huntsville

Start Date: 04/09/2018 Hours Per Week: 40.00
Est. End Date: 10/07/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7807767
Job Location: Huntsville, AL
Rate: 60/hr max
Duration: 6 months
Input Date: 04/13/2018
Last Updated: 04/20/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification Checker III/IV

Location: Canoga Park, CA
Rate: $55-$60/hr DOE
Duration: 6 Month W2 Contract
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**Candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
** Strong proficiency using GD&T per ASME Y14.5 **
** 5-10 years Creo and Windchill PLM System **

Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 8889
Job Location: Canoga Park, CA
Rate: 55-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cable Harness Designer/ CREO

Description:
Job Title: Cable Harness Designer/ CREO
Location: Tucson, AZ
Duration: On-going/ long term contract
Pay Rate: $70 to $80/ hour (DOE)
Please Note: Candidate must be able to obtain DoD Secret Clearance upon offer (or already have an active Secret Clearance)

Description:
Cable/Harness Designer Senior level position in the Mechanical Subsystem Directorate, Mechanical Design Integrity Department.

Assignments will be received in task and objective oriented terms.

Conducts briefings and participates in technical meetings for internal and external representatives.

Foster effective communication between teams and team members.

Work is performed without appreciable direction either individually, in a team environment, or in a supervisory capacity to develop major wire harness and/or flex harness components or develop improvements to a product to facilitate manufacturing operations.

Uses Computer Assisted Design (CAD) systems to prepare electro/mechanical design layouts, electrical diagrams, detail and assembly drawings and models, and related documentation in conformance to appropriate program and/or military specifications.

Responsible for identification & execution of the program requirements and ensuring the quality of Model Data Sets and associated Drawings are delivered with program cost and schedule constraints.

Provide interpretation and implementation of ASME Y14 Standards and drafting standards.

Support the definition of all drawings necessary to describe the product for full design disclosure in order to comply with the requirements for a Product Level Technical Data Package.

Become actively involved in daily operations when required to meet schedules or to resolve complex problems.

Collaborate with the engineering and program personnel on staffing requirements and subsequent assessment of individuals performances.

Conduct timely employee performance development discussions and plans for employees growth.



Required Skills:
5 years or more of Cable routing experience with a combination of Pro-Engineer/CREO Cable Module, Pro-Diagram, CREO Schematic or RSD

SME with mechanical design experience that may include areas such as electrical/mechanical packaging, harnessing, cabling, electrical schematic/diagrams, structures, surfacing, and mechanisms.

SME background in manufacturing methods/processes of harness design such as IPC-620

SME user of CREO or Pro/Engineer Cabling Module, Pro/Diagram, CREO Schematic, and Sheet Metal Module.

Candidate must have complete understanding of basic principles, theories and concepts for creation and preparation of engineering design documentation.

Candidate must have a full knowledge of industry practices and standards used in drafting, modeling and design development/revision.

Candidate must be able to identify and correct design, model, or drawing errors/omissions/deficiencies and recommend corrective actions or improvements.

Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design concepts, and many other high level tasks.

Technical knowledge using documentation specifications such as MIL-STD-31000, ASME Y14.5M, ASME Y14.24 and ASME Y14.100.

Must have the ability to apply Geometric Dimensioning and Tolerancing (GD&T).

Expert user of CREO or Pro/Engineer solid modeling tool and considerable knowledge of Windchill PDM.

Effective oral and written communication skills / good communicator

Ability to work effectively in a team environment or independently

Self-starter

Demonstrate leadership skills

This position requires the eligibility to obtain a security clearance.

Non-US citizens may not be eligible to obtain a security clearance. The Defense Industrial Security Clearance Office (DISCO), an agency of the Department of Defense, handles and adjudicates the security clearance process. Security clearance factors include, but are not limited to, allegiance to the US, foreign influence, foreign preference, criminal conduct, security violations and drug involvement. Employment is contingent on other factors, including, but not limited to, background checks and drug screens.



Desired Skills:

Experience with Microsoft Word, Excel and PowerPoint.

Knowledge of Company Drafting Standards, Mechanical Engineering Process for documentation preparation.

Working knowledge of RMS processes and procedures

Existing Secret Clearance Preferred.
 
Job Number: 385932
Job Location: Tucson, AZ
Rate: $70 to $80 DOE
Per Diem: No
Overtime: Yes
Duration: On-going/ Long Term
Start Date: ASAP
Input Date: 04/11/2018
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3

Description:
Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.

Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.
40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.
10%: Test support for combustion devices components
20%: Supplier integration with external vendors
20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Experience working an equivalent engineering design/development environment is desired.
-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering
-Ability to read and interpret blueprints, technical drawings and specifications
-Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.


Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).
 
Job Number: 8727
Job Location: Jupiter, FL
Rate: $45.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer (Project Engineer) - Level 2 / Level 3 FL

Description:
161797/7804089
Job Title: Component Product Engineer (Project Engineer) - Level 2 / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Position is for a staff engineer for the development of rocket engine systems hardware and engine hot-fire test planning. This position requires knowledge and experience with rocket engine combustion devices hardware design and development, manufacturing processes, and vendor integration. Tasks include development of trade studies, design concepts, systems integration and component- and engine-level test plans. Hardware includes injectors, combustion chambers, nozzles, igniters.



Under general direction, the Engineer determines approaches to objectives demonstrating a complete understanding and application of engineering principles, concepts, and practices.



40%: Development and production fabrication support of Combustion Devices rocket engine components (injectors, thrust chambers, nozzles). Translates engineering and scientific concepts from preliminary ideas through entire product life cycle.



10%: Test support for combustion devices components



20%: Supplier integration with external vendors



20%: Analyzes and verifies product design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.



10%: Develops trade studies, design concepts, systems integration and component-level test plans.

Skills:
-Experience with liquid rocket propulsion systems desired.

-Experience working an equivalent engineering design/development environment is desired.





-General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering

-Ability to read and interpret blueprints, technical drawings and specifications

-Ability to communicate clearly and concisely;May require the use of engineering test equipment, CAD, and/or various computer systems.

-Ability to operate effectively in a team environment.



Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering or related field w/10+ years experience required (or equivalent).

Skills:
Required
PROJECT ENGINEERAEROSPACE

State/Province: Florida
City/Town: Jupiter

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/23/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7804089
Job Location: Jupiter, FL
Rate: 55/hr max
Duration: 6 months
Input Date: 04/30/2018
Last Updated: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Component Product Engineer II / Valves & Actuators

Description:
Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Duration: 6 month contract
Shift: 1st Shift – Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Component Product Engineers are also known as Project Engineers **
** Bachelors degree required **

25%: Development and fabrication support of rocket engine valve and actuator components. Translates engineering and scientific concepts from preliminary ideas through product life cycle.
25%: Supplier integration with external suppliers ensuing requirements are achieved on time and within budget
20%: Interfaces with other members of project or program teams, management, and technical staff to provide coordination of technical, schedule and cost solutions to team objectives.
20%: Analyzes and verifies valve & actuator design and performance for adequacy and reliability. Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
10%: Develops trade studies, design concepts, systems integration and component-level test plans..

Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desirable.

Education:
-BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field.
-MSME/AE degree is highly desirable.
 
Job Number: 8664
Job Location: Jupiter, FL
Rate: $35.00 - $39.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/18/2018
Last Updated: 07/02/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer

Description:
Job Description
Perform preliminary and detail design of metallic and composite structure, including initial sizing of joints, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, Composites workbench is a plus.
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements
Works with Industrial Design team to develop conceptual designs for cabin interior
Develops rapid prototypes for evaluation throughout design development process
Develops 3D CAD models and 2D engineering definition for detail parts, assemblies, and installations inside the SpaceShipTwo pressurized cabin
Establishes manufacturing tolerances for production of structural components
Develops and documents system requirements and interface constraints for components
Coordinates with Analysis and Testing departments to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes.
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)

Educational Requirements
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical and Astronautical, Aerospace, or Mechanical Engineering

· 3 years or more experience design engineering for aerospace composite fabrication and assembly processes
· Proficient with CATIA V5
· Required Workbenches: Part Design, Assembly Design, Sketcher, Drafting, Wireframe and Surface Design
· Desired Workbenches: Generative Shape Design (GSD), Composites (CPD) Experience using GD&T and ASME Y14.5M-1994 drafting standards
· Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
· Experience designing for aerospace environments desired
· Experience in the development of human spaceflight hardware desired
· Experience with Product Lifecycle Management (PLM) software and configuration management processes
· Excellent analytical and decision-making skills
· Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.

· Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

Required Skills:
Microsoft Office, CATIA, Structural design of primary and secondary composite aircraft structure.

The Structures Company is an AA/EOE.
 
Job Number: 73
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 04/18/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Management Analyst CA

Description:
8107462
Job Title: Configuration Management Analyst

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



Note: Data references are engineering data unless otherwise stated. The main CM Tool (PLM) is Windchill



-Review documents (drawings, specifications, supporting engineering data) utilizing configuration management requirements and techniques; including identification, controls and status accounting, for release within company PLM system (Windchill). Includes validation of CAD data, Engineering Bills of Material (EBOM) and attribute data


-Validate Manufacturing Bills of Material (EBOM, MBOM) against released design documentation for accuracy.

Skills:
-Understanding and application of Configuration and Data Management principles, concepts, and practices helpful.



-Knowledge of information technology systems, concepts, hardware and software programs helpful.



-Experience with Windchill Product Lifecycle Management tool helpful.



Desired:

-Drawing Release

-Bills of Material (EBOM/MBOM)

-Familiarity with Oracle ERP

Education:
-A Bachelor's degree in an appropriate discipline and two (2) years of directly related experience, or a combination of education and experience.

Skills:
Required
CONFIGURATION MANAGEMENTORACLEMBOMWINDCHILL
Additional

State/Province: California
City/Town: Rancho Cordova

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 08/31/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8107462
Job Location: Rancho Cordova, CA
Rate: 33/hr max
Per Diem: NO
Duration: 4 months +
Input Date: 06/20/2018
Last Updated: 06/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV

Description:
Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable ** ** 10 years as a drawing and model checker for Aerospace mechanical hardware** ** Strong proficiency using GD&T per ASME Y14.5 ** ** 5-10 years Creo and Windchill PLM System ** Under limited general direction and following established procedures in accordance with contractual requirements and company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships. 40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership. 30% - Performs design calculations to validate any phase of design requirements. 20% - Estimation of resources and schedule required to complete a design activity and training to staff. 10% - Provide technical guidance to less senior CAD designers and to design support personnel. Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered). -Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required. -Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5). -ASME Certification in GD&T is a plus. -Ability to read and interpret product definition and related specifications. -Electronic markup tools and the ability to work paperless is required. Education: -Requires a Bachelors degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: 385801
Job Location: Canoga Park, CA
Input Date: 04/06/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Checker III/IV URGENT CA

Description:
161675/8206731 (7812987)
Job Title: Creo Product Definition & Verification Checker III/IV

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** 10 years as a drawing and model checker for Aerospace mechanical hardware**



** Strong proficiency using GD&T per ASME Y14.5 **



** 5-10 years Creo and Windchill PLM System **





Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.



40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.



30% - Performs design calculations to validate any phase of design requirements.



20% - Estimation of resources and schedule required to complete a design activity and training to staff.



10% - Provide technical guidance to less senior CAD designers and to design support personnel.



Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).

-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.

-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).

-ASME Certification in GD&T is a plus.

-Ability to read and interpret product definition and related specifications.

-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.


Skills:
Required
GEOMETRIC DIMENSIONINGCREOGEOMETRIC TOLERANCINGWINDCHILLAEROSPACE
Additional
PACKAGING ENGINEERINGHARNESS CABLING

State/Province: California
City/Town: Canoga Park

Start Date: 04/30/2018 Hours Per Week: 40.00
Est. End Date: 10/28/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-8206731
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 05/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker - Aerospace Interiors

Description:
Aerospace Interiors Design Checker with a minimum of 7 years of experience. Preferred CAD proficiency on UG NX9 and Teamcenter but other CAD experience will be considered. Strong communications skills and proficiency on MS Office and Adobe Acrobat. Digital red-line experience preferred.
 
Job Number: DC-001
Job Location: Everett, WA
Rate: $35/hr
Per Diem: Split
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 04/06/2018
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4

Description:
Location: Rancho Cordova, CA
Rate: $40.00 - $60.00/HR (DOE)
Duration: 6 month contract
Shift: 9/80 schedule. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo & GD&T. Windchill experience strongly preferred **
** Bachelors degree is required **
Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.
- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent. MS degree is desired.
-10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems.
-Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.
 
Job Number: 8713
Job Location: Rancho Cordova, CA
Rate: $40.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/05/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 / Level 4 CREO Windchill CA

Description:
161673/7703310
Job Title: Design Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **





** Candidates must have significant experience with Creo & GD&T. Windchill experience strongly preferred **



** Bachelors degree is required **



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



• Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.

• Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.

• Applies theories of heat and energy transfer to create practical solutions to technical problems

• Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.

• Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.



Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.



• Windchill experience strongly preferred.

• Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

• Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

• Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

• Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

• Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
-BS degree in an Engineering field or equivalent. MS degree is desired.



-10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems.



-Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred.


Skills:
Required
CREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGAEROSPACE DESIGN
Additional
WINDCHILL


State/Province: California
City/Town: Rancho Cordova

Start Date: 03/19/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: 9/80 schedule. OT possible. Days Per Week: 5.00
 
Job Number: MB-7703310
Job Location: Rancho Cordova, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months
Input Date: 04/19/2018
Last Updated: 04/24/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
- BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 8574
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/12/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 / Bachelors degree is REQUIRED / GD&T / 10 years Design Engineer in rocket propulsion hardware and 10 years Designer using ProE / Creo URGENT CA

Description:
161251/7561968
(8122965)

Job Title: Design Engineer - Level 4

Number of Positions: 3

UPDATE 3-5-18: Manager is requesting candidates with really strong GD&T (Geometric Dimensioning and Tolerencing) experience. Please provide summaries of GD&T experience on your resume.


Must have a Bachelors degree. It is a requirement for this group.


Duties:




** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.
Education:
BS degree in an Engineering field or equivalent field. MS degree is desired.

Skills:
Required
AEROSPACE DESIGNCREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGWINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 02/12/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7561968
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 7 month contract
Input Date: 07/24/2018
Last Updated: 08/06/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 12/11/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

EE Technical Designer 3
(U.S. Citizenship Required*)
Ridley Park, PA
2018-5779

Join our EDI Wiring Process & Tools team to instantiate necessary improvements driving quality and efficiency across BDS. You will coordinate design teams across BDS, enabling commonality at all levels of design. In addition, you will coordinate a multi-disciplined and international team to achieve the EDI Deployment and Sustainment of the Capital Logic Component Library and Symbol Library.

Responsibilities:
• Enter and update parts in library as appropriate
• Enable commonality of EDI Design and Standards across BDS
• Execute BDS Library change control board decisions (both for components and symbology)
• Develop necessary configuration control mechanisms and process documentation to enable a common library system that can support rapid design additions as well as multi-program derivations
• Coordinate and support reduction of backlog of parts and symbol entry needed for each program deployment.
• Support Deployment Specialists to keep program need dates up to date and hold program accountable to provide specification sheets when required for part entry
• Coordinate efforts of distributed team of core librarians entering parts and symbols into the tool
• Responsible for the overall quality of each component and symbol in the Capital Tools Suite Library
• Provide guidance and query responses to core librarians
• Coordinate and attend international calls to destinations such as India at reasonable hours for both parties.
• Work under general direction.
• Develop, maintain, and release electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards.
• Using design tools, prepare documentation and incorporate design changes.
• Create, develop, and maintain systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies.
• Support engineering system design and functionality validation activities.
• Develop and maintain product installation designs and part designs ranging from simple to moderately complex.
• Coordinate activities and products with internal partners and external suppliers.
• Work under general direction.
• Potential travel to coordinate inputs from other sites.

Qualification:
• Familiarity in wire design, wire installation; experience in harness design.
• Knowledge of Electrical System Design and best practices.
• Knowledge of part standards.
• Experience in Computer Aided Design and drafting standards.
• Familiarity with Configuration and Data Management.
• 1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
• Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
• HS diploma or GED Required plus degree requirements

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5779
Job Location: Ridley Park, PA
Rate: Based on experience
Duration: 12 Months
Input Date: 04/06/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer 3 - Ridley Park

Description:
EE Technical Designer 3

Location: Ridley Park, PA
Duration: 1 year

Description:
Supports the EDI Wiring Process & Tools teams to instantiate the necessary improvements driving quality and efficiency across client. Coordinate design teams across client enabling commonality at all levels of design. Coordinate a multi-disciplined and international team to achieve the EDI Deployment and Sustainment of the Capital Logic Component Library and Symbol Library.

Primary duties include:
Enter and update parts in library as appropriate
Enable commonality of EDI Design and Standards across client
Execute client Library change control board decisions (both for components and symbology)
Develop necessary configuration control mechanisms and process documentation to enable a common library system that can support rapid design additions as well as multi-program derivations
Coordinate and support reduction of the backlog of parts and symbol entry needed for each program deployment. Support Deployment Specialists to keep program need dates up to date and hold program accountable to provide specification sheets when required for part entry
Coordinate the efforts of the distributed team of core librarians entering parts and symbols into the tool
Responsible for the overall quality of each component and symbol in the Capital Tools Suite Library
Provide guidance and query responses to core librarians
Coordinate and attend international calls to destinations such as India at reasonable hours for both parties.
Works under general direction.

Baseline description:
Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers.

Additional Experience Requirements:
Familiarity in wire design, wire installation
Experience in harness design.
Knowledge of Electrical System Design and best practices.
Knowledge of part standards.
Experience in Computer Aided Design and drafting standards.
Familiarity with Configuration and Data Management.
1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets

Education / Experience:
AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. (HS diploma or GED Required plus degree requirements)

Skill Code:
623-Electrical Wire Design
 
Job Number: 18-05977
Job Location: Ridley Park, PA
Per Diem: Split
Overtime: possible
Duration: 1 year
Start Date: 4/16/18
Input Date: 04/07/2018
Last Updated: 04/24/2018
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EE Technical Designer/Electrical Wire Designer III - (PA)

Description:
Supports the EDI Wiring Process & Tools teams to instantiate the necessary improvements driving quality and efficiency across BDS. Coordinate design teams across BDS enabling commonality at all levels of design. Coordinate a multi-disciplined and international team to achieve the EDI Deployment and Sustainment of the Capital Logic Component Library and Symbol Library. Primary duties include:

Enter and update parts in library as appropriate
Enable commonality of EDI Design and Standards across BDS
Execute BDS Library change control board decisions (both for components and symbology)
Develop necessary configuration control mechanisms and process documentation to enable a common library system that can support rapid design additions as well as multi-program derivations
Coordinate and support reduction of the backlog of parts and symbol entry needed for each program deployment. Support Deployment Specialists to keep program need dates up to date and hold program accountable to provide specification sheets when required for part entry
Coordinate the efforts of the distributed team of core librarians entering parts and symbols into the tool
Responsible for the overall quality of each component and symbol in the Capital Tools Suite Library
Provide guidance and query responses to core librarians
Coordinate and attend international calls to destinations such as India at reasonable hours for both parties.

Works under general direction.

Baseline description: Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.


Additional Experience Requirements:
Familiarity in wire design, wire installation
Experience in harness design.
Knowledge of Electrical System Design and best practices.
Knowledge of part standards.
Experience in Computer Aided Design and drafting standards.
Familiarity with Configuration and Data Management.
1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

ACS Group (formerly 'Comforce')
 
Job Number: EETechDesPA
Job Location: Ri, PA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 05/25/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical & Instrumentation Designer - Refinery (OK)

Description:
Basic Purpose/Accountabilities: Responsible for the coordination of all phases of project efforts related to the production of documents associated with the detailing of an assigned project undertaken by the Refinery Technical Services Group.

Works directly with managers, supervisors, and team leads to plan and execute assigned projects.

Primary Functions/Responsibilities:
Safety
• Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. Ensures that all compliance requirements are met or exceeded.
People
• Actively plan and coordinate all aspects of the project team’s efforts and objectives.
Integrity
• Responsible, accountable, and will deliver on any and all commitments made by the various project disciplines.
Responsibility
• Assign design and drafting resources to develop, design, construct, and start up assigned projects.
• Client and Ponca City recognized expertise lead in regard to design standards and processes.
• Ensures all quality measurements are achieved.
• Resource for direct and contract designers.
• Provide technical assistance to the field coordinators.
• Understand, support, and implement the Front End Loading work process and other best practice project execution.
• Communicates project priorities and personnel requirements to affected disciplines to ensure proper project scheduling.
• Conduct project quality assurance reviews with the various project leads.
Innovation
• Participate in and support the PSM group and RTS Engineering by using the best practices/lessons learned.
• Assist in identifying cost savings for project designs and or the Evergreen Systems.
Teamwork
• Participate in training opportunities.
• Network with peers internally and externally to share best practice information.
• Be a resource for training and developing Designers in order to support and enhance their work and progress.
• Provide guidance and mentorship to Designers.

Critical Skills:
• Technical/Functional Expertise
• Able to interact with Contractors
• Strong project and CAD experience
• Associate Degree in Detailed Design

Leadership Criteria:
• Uses technical expertise to contribute to the success of the team and refinery.
• Accountable and delivers on commitments.
• Customer focused.
• Has courage to surface and resolve conflicts.
• Strongly encourages creativity, innovation and continuous improvement
• Drive company core values.
• Provides constructive feedback to team members.
• Ability to balance multiple projects and assignments simultaneously and to prioritize the work.
• Ability to communicate, both verbally and in written form in a professional manner.

Other:
• Able to lift 50 lbs.
• Able to walk continuously for 3 hours
• Able to work outside for 10 hrs.
• Able to climb ladders to a height of 30’.

Other duties as assigned or deemed necessary.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-51181OKPCR
Job Location: Ponca City, OK
Rate: $BOE/HR BOE
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: 05/14/2018
Input Date: 06/25/2018
Last Updated: 06/25/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical CAD Designer - Level II

Description:
Electrical CAD Designer - Level II

Cape Canaveral Air Force Station, FL
1 Year Contract
Pay Rate: DOE

The CAD Drafter will document in ACAD Launch facility electrical, communication and IT detail drawings. Will work with E&I Electrical and Communication Engineers to produce drawings required to perform modifications to existing and for new designs within ULA launch facilities. This position is in support of United Launch Alliance Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles. He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification projects. He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases. This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards. Candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.
 
Job Number: 8923
Job Location: Cape Canaveral, FL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 04/13/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical CAD Designer Level 2

Description:
• The CAD Drafter will document in ACAD Launch facility electrical, communication and IT detail drawings.

• Will work with E&I Electrical and Communication Engineers to produce drawings required to perform modifications to existing and for new designs for launch facilities.

• This position is in support of Launch Operations at Cape Canaveral Air Force Station Florida for the Atlas V, Delta IV and future Vulcan launch vehicles.

• He/she will gather and organize information, perform research and prepare sketches and detailed drawings for facility modification projects.

• He/she will perform field walk-downs and review and revise electronic CAD files from a variety of native drawing databases.

• This position requires knowledge of civil and structural design, drafting practices as well as a sound practical knowledge of engineering principles and industry standards.

• Candidate will be responsible for quality of design documents ensuring all are prepared & checked in accordance with applicable procedures.
 
Job Location: Cape Canaveral, FL
Rate: open
Per Diem: possible
Overtime: possible
Duration: 12 months
Input Date: 04/13/2018
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Scott
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Hood River, WA)

Description:
Join an Industry leader in the UAV field that understands the importance of a work life balance. We are located in Hood River which means you will be working in one of the most beautiful places in the US and an resort area for some of the best outdoor activities in Oregon. We work a 9/80 schedule which means 26 three day weekends a year. You will be working on challenging and interesting projects for a dynamic company that values a Pioneering spirit.

Will be responsible for implementing electrical system architecture, identifying new technologies and develop design requirements. Allocates requirements across system architecture and designs and conducts trade studies. Monitors subsystem design development activities for architectural consistency. Performs and/or evaluates risk assessments and generates or approves risk mitigation plans and strategies.
Decomposes system requirements and evaluates sub system design development. De-conflicts and resolves module-level requirements allocations. Creates and/or reviews electrical system architectures and develops detailed electrical hardware and firmware designs. Establishes the electronic hardware interface designs and review and monitors design consistency. Develops and/or reviews and approves electronic hardware documentation packages.

QUALIFICATIONS
Do you have experience with Analog, Digital, Power Distribution and EMI/EMC fundamentals-concepts within circuit design? Familiar with Rigid PCB technologies (IPC Standards, PCB fabrication, PCBA Assembly processes and documentation standards, AS9100 standards), Ethernet, RS232 and VeriLog? Familiarization with Flex and Rigid-Flex Technologies would be a plus.

Education & Experience
Typical experience: 9-13 years in an engineering classification with a Bachelor's degree or 7-11 years experience in an engineering classification with a Master's degree

Specific Experience Required
CAD Tools: Preferred experience with Mentor Graphics DxDesigner, Mentor Graphics
Hyperlinx - Signal Integrity simulation, Power Integrity simulation and Circuit Analysis tools (E.g. LTSpice).
Test and Debug: Mixed Signal Oscilloscope, Spectrum Analyzer, Digital Multi-meter, Programmable Load and other test tools.

Other requirements: Proficiency in Word, Excel, PowerPoint, Outlook and Visio.
Programming skills(added bonus): FPGA SOC/microcontroller, Verilog, Embedded-C.

Email Resume in MS Word Doc. Format to: Albert.Peniche@Yoh.com

ALBERT PENICHE
SR. TECHNICAL RECRUITER, AEROSPACE & DEFENSE
YOH AVIATION, A DAY & ZIMMERMANN COMPANY
D 314-791-1565
albert.peniche@yoh.com
 
Job Number: APEENGR
Job Location: Bingen, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT - Direct
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 04/09/2018
Firm Name: YOH SERVICES
Attention: Albert Peniche
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer AAP

Description:
We are seeking an Electrical Engineer for one of our leading clients to guide a successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of our client's products and services!

The ideal candidate for this position will perform the following tasks:
* Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
* Consulted extensively by associates and others as a recognized authority within the field
* Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
* Approach to problem solving balances technical product, cost and schedule
* Works without appreciable direction; work is reviewed from a long-range perspective for desired results
* Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Mandatory Qualifications and Experience:
* Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
* 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
* Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
* Usage of Auto cad and Catia V5.
* Wiring diagram creation
* Wire harness creation
* Wire installation drawing creation
* Competent in circuit design, voltage, shielding.

Desired Qualifications and Experience:
* CHS is a plus but not required.

The ideal candidate for this position will possess the following skills and characteristics:
* Able to coordinated vendors, manufacturing and other engineering personnel in development and testing to resolve problems.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127559
Job Location: Savannah, GA
Start Date: ASAP
Input Date: 03/28/2018
Last Updated: 04/19/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer AAP

Description:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Wiring diagram creation, Wire harness creation, Wire installation drawing creation. Competent in circuit design, voltage, shielding.
• Able to coordinated vendors, manufacturing and other engineering personnel in development and testing to resolve problems. Usage of Auto cad and Catia V5. CHS is a plus but not required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
• Languages Required (in addition to English): None

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-235
Job Location: Savannah, GA
Rate: $62-$67
Per Diem: yes
Overtime: yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 03/20/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Designers - Mentor Graphics or CEEDS

Description:
Familiarity in wire design, wire installation
Experience in harness design.
Knowledge of Electrical System Design and best practices.
Knowledge of part standards.
Experience in Computer Aided Design and drafting standards.
Familiarity with Configuration and Data Management.
1 -2 to years of experience with the Mentor Graphics Capital tools suite (including Logic, HarnessXC, and Library)
Familiarity with CAD Tools, such as CEEDS, as well as EXCEL spreadsheets

Email resumes to: mmccarthy@pdstech.com
 
Job Number: BO-PA-Ceeds
Job Location: Ridley Park, PA
Rate: $51.00/hour
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/09/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Systems Engineer

Description:
Embedded Systems Engineer needed to join development team.



Job Responsibilities

  • Aid in the development of the Vehicle Control Unit (VCU) and/or Electronic Control Unit (ECU);

  • Create/refine finite state machines, and implement controllers for vehicle systems in software;

  • Aid in the development of a system for distributed control of an engine, electric motors, and actuators over a CAN network;

  • Support the design of a wing fold interface system working with existing electromechanical actuators/sensors;

  • Support definition of the data interface specification (e.g. CAN, RS-485, etc.);

  • Integrate microcontroller software for CAN bus based actuation and sensing per DO-178 (potentially implemented via Simulink and Stateflow);

  • Address custom CAN messaging and VCU communications with hand coding as required;

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Coordinate and communicate effectively with other engineers, technical personnel, and management;

  • Support and participate in testing activities component, drive, and/or flight as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities and best practices, including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications


  • The candidate must have:

    • A Bachelor\'s degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 5+ years technical work experience, or;

    • A Master\'s degree in Computer, Electrical, Mechanical, or Aerospace Engineering and 3+ years technical work experience.



  • Proven experience with robust software development cycles: taking software from concept through detailed development, executing code on targets, and testing to internal/external requirements;

  • Proven experience developing software for automobiles, particularly for vehicle control;

  • Experience with CAN messaging protocol;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Software Experience: C/C++.


Highly Desired Qualifications


  • Experience with software design, documentation, and testing per DO-178B/C;

  • Functional safety experience with ISO-26262 or IEC 61508;

  • Formal training or practical experience with software revision control techniques and tools;

  • Experience with ASTM F2245 or FMVSS;

  • Experience with LabVIEW or other real time data acquisition software;

  • Experience programming CPLDs or other logic devices;

  • Familiarity with modern electrical design layout tools such as Altium or Cadence products;

  • Knowledge or expertise in CAN Aerospace, CANopen, SAE J1939, ARINC-429 ARINC-825protocols;

  • Familiarity with Python or Perl;

  • Familiarity with Fortran.




 
Job Number: 18-13621
Job Location: Woburn, MA
Rate: 130000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-05 00:00:00.0
Input Date: 04/05/2018
Last Updated: 04/16/2018
Firm Name: NESCO RESOURCE
Attention: Hong Lu
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Electromechanical - 3 / active secret preferred / CREO / electronic packaging CA

Description:
1631
Engineer Electromechanical - 3 (Job Number: 18002041)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 19, 2018

Target End Date: Mar 15, 2019

Pay Rate: $58/hr. - $60/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year

The responsibilities include mechanical design & analysis using computer-aided design (CAD), conducting packaging trades, tolerance and interference analyses, generating drawing packages & associated electronic data, and supporting the fabrication, assembly and test of the hardware.


Basic Qualifications:

•5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.
•A Bachelor of Science degree in a STEM (Science, Technology, Engineering or Math) discipline
•Electronic packaging, CAD, or mechanical design experience in an aerospace environment
•Demonstrated technical skills with experience supporting a multi-disciplined team
•Experience working with different partners across organizations and programs
•Proficient in performing tolerance and interference analyses
•Experience in generating and releasing product detail and assembly drawings
•Experience with PTC Creo / Intralink software applications



Preferred Qualifications:

•A Master’s Degree in Mechanical or Aerospace Engineering and 4+ years of engineering experience in an aerospace environment
•Experience with electronic packaging / mechanical design for airborne & space applications
•Electronics design development and sustaining experience spanning cradle to grave
•Experience with Enovia PLM software application
•Proficiency with electrical design, electronics manufacturing processes and qualification activities
•Familiarity with research and development of advanced packaging technologies
•Active DoD Secret or Top Secret, and/or SCI clearance
 
Job Number: MB-1631
Job Location: Redondo Beach, CA
Rate: 58-60/hr
Per Diem: no
Duration: 12 month contract
Input Date: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Systems - 3 / NX CA

Description:
1645
Engineer Systems - 3 (Job Number: 18005531)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Jun 11, 2018

Target End Date: Jun 7, 2019

Pay Rate: $55/hr. - $58/hr.

Location : El Segundo, CA

Work week: 9/80

Duration: 1 year

Candidates must utilize a Systems Engineering approach to establish F/A-18 Support Equipment functional and performance requirements and advance through the solution concept development, trade studies, integration, hardware design, manufacture, test, verification and validation phases. Applicants must be familiar with 2D and 3D Computer Aided Design (CAD) utilizing NX (Unigraphics) and be experienced with layout, detail and assembly level design, as well as creating Bills of Material, and processing through the release cycle. Applicants will be responsible to ensure that Support Equipment requirements are coordinated with Integrated Product Team members, as well as with subcontractors and using customers. Candidates must be eager to learn, self-motivated and possess excellent interpersonal, and communication skills and also be proficient with the Microsoft Office tool suite. Candidates will follow through with designs though the fabrication, assembly, and/or acquisition process and will create fit/function/first article and acceptance test documentation.


Basic Qualifications:

-6 years with a Bachelor of Science: STEM degree or related educational field or equivalent experience plus at least 6 years of related experience
-Ability to create 3D CAD and 2D drawings using Unigraphics (NX) and Teamcenter
-Must have excellent written and oral communications skills and proven ability to work with / communicate with project team members
-Ability to solve complex technical problems and provide solutions which are innovative


Preferred Qualifications:

Experience in Support Equipment engineering, requirements generation, product development, design, acquisition, test and delivery.

-Experience with military aircraft maintenance, operations and field support
-Experience with tool design or special test equipment (STE) design and usage
-Experience with aircraft structure and subsystems design
-Experience with logistics databases and requirements
 
Job Number: MB-18005531
Job Location: El Segundo, CA
Rate: 55-58/hr
Per Diem: no
Duration: 1 year
Input Date: 04/20/2018
Last Updated: 04/24/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Aide

Description:
Our client is seeking someone with excellent communication skills and the ability to read and comprehend blue prints. Are you an Engineering Aide with AutoCad experience? We have a long term opportunity with a well-known company in the aviation industry!

The ideal candidate for this position will perform the following tasks:
* Provides technical support to engineers on a variety of technical tasks.
* Gathers, maintains, formats, compiles, and manipulates technical data, such as laboratory or material test results and engineering design changes.
* Produces engineering documentation, reports, drawings (flow charts, block diagrams, and schematics).
* Performs detailed mathematical calculations using established formulas; preliminary analyses of data where guidelines are provided in such areas as trajectory adequacy, model dimensional consistency; and quantitative judgments concerning technical data.
* Uses personal computer in performance of analyses and development of documentation/reports.
* May conduct tests and record data to assist with engineering evaluation or analysis.
* Manufacture Engineering support operations in the ABU manufacturing assembly area.
* Will be required to translate design requirements, prints, and technical drawings into comprehensive work instructions for the assembly personnel
* Provide daily hands on support to assembly personnel in the assembly of complex Circuit card assemblies, sub- assemblies and box level final assemblies.

Mandatory Qualifications and Experience:
* Blue print reading capability.
* Ability to translate print requirements into logical work instructions, utilizing high definition pictures, illustrations and text to define sequence methods and use of required assembly tools to complete assemblies.
* Ability to provide quick turnarounds on technical assistance requests to the manufacturing floor.
* Work with engineering on specialized tests, trials and Engineering change requests.
* Ability to detect drawing / design errors prior to production implementation.
* Ability to assist in First piece evaluations to ensure design / manufacturabiity and compliance to requirements of design.

Desired Qualifications and Experience:
* Previous circuit card assembly experience desired.
* CAD / Autocad experience a plus.

The ideal candidate for this position will possess the following skills and characteristics:
* Good oral and written communication skills
* Ability to work with people.
* Ability to read and analyze complex technical drawings and print illustrations a must.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127627
Job Location: Owego, NY
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 05/01/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Electromechanical - 4 / PWB / Mentor Expedition CA

Description:
1628
Engineering Electromechanical - 4 (Job Number: 18000442)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 5, 2018

Target End Date: Mar 1, 2019

Pay Rate: $60/hr - $63/hr.

Work Week: 9/80

Location: Redondo Beach, CA

Duration: 1 year


PWB Designers specialize in the areas of printed wiring board layout, routing, and design. The ability to develop a solid board development plan (from pre-IDR1 thru IDR3) and to coordinate and conduct effective board readiness / artwork reviews is a critical skill to develop. CAD tool proficiency is absolutely essential. The ability to mentor others in the use of the CAD tools is required. Experienced performers are expected to take on final design and drawing check responsibilities. Familiarity with board producibility and assembly and manufacturing processes is required. Product Engineers and designers are expected to enforce and follow all applicable processes.


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD or equivalent years of experience and education.

Nine years industry experience in board layout


Preferred Qualifications:

Proficiency in Mentor Expedition flow and related tools. Experience in high speed digital as well as RF board layout
 
Job Number: MB-18000442
Job Location: Redondo Beach, CA
Rate: 60-63/hr
Per Diem: no
Duration: 12 month contract
Input Date: 04/26/2018
Last Updated: 06/12/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FEA Engineer

Description:
Job Title: FEA Engineer

This position is for an experienced Stress Engineer to support Gas Turbine product development through performing detailed stress analysis and validation of structural components and assemblies.

Essential Job Functions

- Finite Element Analysis of Turbomachinery components

- Transient Thermal Mechanical, Non-linear and Fatigue

- Present results in Design Review achieving release of desired component deliverables.

- Ability to complete projects independently with minimal oversight to achieve project deliverables.
Turbomachinery component knowledge especially Gas Turbine knowledge preferred

- Experience in using a variety of engineering tools like ANSYS, MATLAB, MathCAD, Excel, etc.

- Exceptional communication skills

- Organizational and time management skills

- Ability to work solitary and with global teams

- Manage deliverables



Secondary Job Functions:

At QuEST, we often challenge our team members to temporarily work outside the scope of their primary job functions to broaden their skills and help the organization. Some of these roles and opportunities include:



Execution within multiple services

Project Management: Execution and Support

Technical Leadership and Technical Reviews

Develop work instructions to ensure repeatability

Personnel Management

Onboarding and Professional Development: collaborate and mentor QuEST Team Members

Cross-functional teams

Geographic re-assignments

Account Management and Sales

Enabler roles, such as Human Resources, Technology Development, and IT

Quality Management and Continuous Improvement





Qualifications

BS/MS in Mechanical Engineering

Highly skilled in ANSYS and ANSYS Workbench

Proficiency in MS office (Word, Excel, PowerPoint and Outlook) required

Exposure to 3D CAD tools, Siemens NX preferred

Exposure to Gas Turbine components

Proficiency with office tools, MS Office, MS Excel, required
 
Job Number: FEA 01
Job Location: Charlotte, NC
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 04/20/2018
Firm Name: QUEST GLOBAL SERVICES
Attention: Akshay Adya
Address: 111 FOUNDERS PLAZA STE 1700
City, State: EAST HARTFORD, CT 06108
Phone: 860/726-7025
Website: www.quest-global.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer

Description:
Needs to be able to obtain a secret clearance

•Current “hands-on” experience with Cadence electrical engineering development tools
•Experience with XILINX & Lattice FPGA developments and toolsets.
•Familiarity with JTAG protocol
•Control account management experience
•MATLAB/Simulink tool experience
•Familiarity with image and signal processing algorithms
•Life cycle engineering support related to diminishing manufacturing sources and material shortages (DMSMS)
 
Job Number: 41859
Job Location: NH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 09/13/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV

Description:
Support Equipment Design Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN**
** Dual citizens and Permanent Residents are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Ground Support Equipment (GSE) experience is required.
** Creo experience is required **
** 10+ years experience and a Bachelors Degree or equivalent are required **
**(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

-Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Skills:
-Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
-Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
-Must be an experienced engineer with knowledge of CAD using PTC Creo2.
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Pre-verification of CAD models and drawings in the PLM system is also required.
-Effective interpersonal and communication skills and must be able to operate effectively in a team.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.

Education:
-Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
-Experience in Design and Manufacturing is a must.

Skills Required:
GROUND SUPPORT EQUIPMENT CREO AEROSPACE
 
Job Number: 8235
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV / Candidates needed with Ground Support Equipment DESIGN experience and Creo experience required URGENT CA

Description:
7610419/161126
Job Title: Support Equipment Design Engineer IV

Candidates needed with 5 to 10 years of Ground Support Equipment Design experience. The manager wants to clarify that this is a GSE Designer role, not a GSE Drafter role.


Number of Positions: 2

Remaining Positions: 1

Candidates should have Ground Support Equipment (GSE) experience.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Ground Support Equipment (GSE) experience is required.

(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **



** Creo experience is required **



** 10+ years experience and a Bachelors Degree or equivalent are required **



Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
Leads preliminary and critical design review preparations.
Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.


Skills:
Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
Pre-verification of CAD models and drawings in the PLM system is also required.
Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
Expert knowledge of reading and interpreting drawings and related specifications is also required.
Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.


Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.

Skills:
Required

GROUND SUPPORT EQUIPMENTCREOAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7610419
Job Location: Canoga Park, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 04/20/2018
Last Updated: 05/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Designer III

Description:
Ground Support Equipment Designer III

Location: Canoga Park, CA
Pay Rate: DOE ($40/hr - $55/hr)
Duration: 7 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP; NO DUAL PASSPORTS**

Duties:
-Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Requirements:
** Ground Support Equipment (GSE) experience is required**
** Creo experience is required **
** 5 to 10 years experience and a Bachelors Degree or equivalent are required **
-Aerospace Assembly Support Equipment Design & Product Design Experience required
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines
-Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines
-Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Pre-verification of CAD models and drawings in the PLM system is also required.
-Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.

Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.
 
Job Number: 8616
Job Location: Canoga Park, CA
Rate: 40-55
Per Diem: Split Possible
Overtime: Possible
Duration: 7 mos
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Designer III / Ground Support Equipment (GSE) experience is required CA

Description:
Job Title: Ground Support Equipment Designer III

Number of Positions: 6

Remaining Positions: 6

The manager wants to clarify that this is a GSE Designer role, not a GSE Drafter role.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Ground Support Equipment (GSE) experience is required.

(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **



** Creo experience is required **



** 5 to 10 years experience and a Bachelors Degree or equivalent are required **



Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
Leads preliminary and critical design review preparations.
Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.
Skills:
Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
Pre-verification of CAD models and drawings in the PLM system is also required.
Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
Expert knowledge of reading and interpreting drawings and related specifications is also required.
Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.


Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.


Skills:
Required
GROUND SUPPORT EQUIPMENTCREOGEOMETRIC DIMENSIONINGGEOMETRIC TOLERANCINGWINDCHILL
Additional
GSEDESIGN ENGINEERAEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 02/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7569549
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 7 month contract
Input Date: 03/19/2018
Last Updated: 05/23/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Technical Analyst 1

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

MP&P Technical Analyst 1
(U.S. Citizenship Required*)
Berkeley, MO
2018-5772

Our Polymer Additive and Direct Digital Manufacturing Lab is looking for an energetic, enthusiastic person – excited about 3D Printing and the future of Aerospace manufacturing. This person will join our Research and Technology Materials, Process and Physics Team, supporting engineers in the areas of additive manufacturing, material testing and evaluation, composite fabrication, paint operations, assembly operations, documentation and record keeping, as well as keeping the lab area clean and supplied in support of multiple development programs.

Responsibilities:
• Evaluate parts, materials, processes, technology or equipment through research and testing to ensure safe, reliable, and accurate operation within specification.
• Analyze failed parts and processes to reduce or eliminate future failures.
• Strive daily to improve efficiency and first time quality in all tasks.
• Determine root cause and document results and recommendations.
• Propose, develop and validate revisions to procedures and specifications.
• Determine suitability of parts, materials and processes, coordinate with stakeholders and suppliers, schedule and oversee machine maintenance.
• Provide knowledge and technical consultation to internal and external stakeholders.
• Give tours of the lab as required. Work under general direction from lab lead and engineers.
• Program and operate Selective Laser Sintering (SLS), Stereolithography (SLA), Digital Light Processing (DLP)/Continuous Liquid Interface Production (CLIP), and Fused Filament Fabrication (FFF) machines.
• Remove support material from prints. Operate other AM support equipment such as including bandsaw, manual grinder, beadblaster, parts washer, and tumbler.
• Operate, control, and optimize multiple Rapid Prototyping processes from CAD file to finished part.

Qualification:
• Required – Able to obtain Secret Clearance
• Willing to travel up to 10% of the time
• Must be willing to work a flexible schedule as the project demands.
• Must possess strong written and verbal communication skills and the ability to work within and across an Integrated Product Team (IPT)
• Support troubleshooting of laboratory equipment and test-related problems
• Coordinate periodic calibration of equipment
• Work closely with health and safety personnel including performing daily safety inspections of lab areas
• Willingness to perform non-routine tasks such as minor machine repair
• Strong skills in Microsoft Word, Excel, and Outlook
• Excellent communication skills
Preferred:
• Current DOD Secret Clearance
• Experience working in a laboratory environment, with 3D printing methods
• Experience operating a forklift
• Mastery of nesting, layering, and setting up SLA, SLS or FDM builds for optimized throughput
• Able to program and build complex and tight tolerance components
• Able to work overtime and/or weekends as required, with little to no advance notice, and sometimes for extended periods
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5772
Job Location: Berkeley, MO
Rate: Based on experience
Duration: 6 Months
Input Date: 04/06/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Peggy Holcombe
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Provide technical support for the Production Engineering Department. The Engineer must be able to develop documentation and procedures to ensure compliance specific to various company policies and procedures.

Duties and Responsibilities:
1. Audits and recommends improvements to the effectiveness and efficiency of the Production Engineering Department’s procedures and processes.
2. Manages and supports the implementation of enhancements to procedures, processes and operating tools.
3. Serves as a Liaison with various external departments for progress and maintenance of processes while ensuring they align with all other relevant procedures and communicate awareness of changes.
4. Interfaces with multiple functional groups including: Systems Architects, Supply Chain, Quality and Production Operations to develop strategies for implementation of engineering, system, and process improvements.
5. Identifies opportunities for improvement and standardization; documents and prepares initiatives for process and/or engineering change to reduce cost and increase quality.
6. Participates in activities to enhance and support HACI Production teamwork, and provide an environment for all team members to participate in CI (Continuous Improvement).
7. Provides technical support and assistance with the development and improvement of methods, quality product design, cost, and technical issues of a complex manner as required.
8. Analyzes a variety of engineering data to help determine requirements to meet objectives.
9. Plans and documents various installation processes, tooling, equipment and quality control methods to optimize the manufacturing operation.
10. Provides data comparisons between the Engineering Bill of Materials (EBOM) to the Manufacturing Bill of Materials (MBOM), Engineering Bill of Materials (EBOM) to the “As Built”.

Education, Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
2. In lieu of education one year of direct aircraft experience potentially may be substituted for each year of college.
3. 5+ years experience in aerospace industry in aerospace manufacturing.
4. Six Sigma Training (Minimum Green Belt Certification – highly preferred).

Knowledge, Skills and Abilities:
1. Strong analytical skills.
2. Ability to read and interpret engineering drawings and/or specifications requirements.
3. Excellent oral and written communication skills.
4. Excellent problem solving skills.
5. Ability to work in a diverse environment.
6. Excellent communication and presentation skills.
7. Some experience utilizing tools such as SAP, CAD CAM, CATIA, Microsoft Office Suites (Word, Excel, PowerPoint, Project and Lotus Notes).
8. Ability to multitask.
9. Strong organizational skills.
10. Working knowledge of aircraft assembly, sequencing and manufacturing flow.
11. Working knowledge of or exposure to Lean Manufacturing tools.
 
Job Number: 28-018
Job Location: Greensboro, NC
Rate: DOE
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 05/29/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.


Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/13/2018
Last Updated: 05/18/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT possible.


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

**An In-Person interview is REQUIRED. Candidates must be able to attend an in-person interview at their own expense**


Duties:
** Looking for a go getter with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 3 candidates will have up to 2 to 5 years of applicable experience **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8706
Job Location: Canoga Park, CA
Rate: $45.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Duration: 6 month contract
Shift: 2nd Shift – 2:30 PM to 11:30 PM - Regular 40 hour week. OT possible.

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

Duties:
** This role will be working second shift. 2:42 PM to 11:30 PM **
** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
** Level 4 candidates will have 5 to 9 years of applicable experience **
** Candidates must be able to attend an in-person interview at their own expense **

The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.


Desired:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.
 
Job Number: 8707
Job Location: Canoga Park, CA
Rate: $55.00 - $58.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 3 CA

Description:
161431/7579579
Job Title: Manufacturing Engineer / Level 3

Number of Positions: 2

Remaining Positions: 2

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 3 candidates will have up to 2 to 5 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 5 years of related experience, or an equivalent combination of education and experience.

Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7579579
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 months +
Input Date: 04/18/2018
Last Updated: 05/11/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer / Level 4 / 2nd shift CA

Description:
161466/7679383
Job Title: Manufacturing Engineer / Level 4

Number of Positions: 1

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable





** This role will be working second shift. 2:42 PM to 11:30 PM **



** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **



** Level 4 candidates will have 5 to 9 years of applicable experience **



** Candidates must be able to attend an in-person interview at their own expense **





The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing / assembly operations for rocket engine components and/or systems, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Education:
Requires a Bachelor's degree in an appropriate discipline and 9 years of related experience, or an equivalent combination of education and experience.


Skills:
Required
MANUFACTURING ENGINEER
Additional
AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 03/26/2018 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7679383
Job Location: Canoga Park, CA
Rate: 58/hr max
Per Diem: no
Duration: 6 months +
Start Date: ** This role will be working second shift. 2:42 PM to 11:30 PM **
Input Date: 04/30/2018
Last Updated: 05/03/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Manufacturing Engineer 3

Description:
PDS TECH INC. is seeking candidate for Manufacturing Engineer 3 position located in Palmdale,CA.

Position Summary / Responsibilities


Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. ​

Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.

Adapts machine or equipment design to factory and production conditions.

May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

 
Qualifications:
Basic Qualifications:
  • Bachelor's Science STEM (Science, Technology, Engineering, Math) Degree and 5 years of related work experience. Or 3 Years with Masters; 0 Years with PhD.
  • Must be Familiar with MS Office (Word, Excel, PowerPoint and Project)
  • Must have CAD (CATIA) experience.
  • Manufacturing Liaison experience as well as have outstanding written and oral communication skills.

 

Preferred Qualifications:

  • MES experience
  • Previous experience with SAP
  • CATIA V5 Experience
  • Composites fabrication and tooling concepts
  • GD&T

 
Job Number: 1810083522
Job Location: Palmdale, CA
Duration: 0 months
Input Date: 03/30/2018
Last Updated: 12/11/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJWQAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Solumina, SAP, Smarteam, Catia V5

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8905
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 04/10/2018
Last Updated: 06/04/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract


Unique Skills:
Solumina and SAP experience preferred

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8642
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/15/2018
Last Updated: 12/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III URGENT CA

Description:
160456/7347633
Job Title: Manufacturing Engineer II/III
48/hr max

Number of Positions: 10



Duties:


** Looking for go-getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **
Also, Delmia, Maestro and Windchill are preferred, not required.




-There are two (2) Level II openings and two (2) Level III openings.



The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.

Skills:
Required Skills:

-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.

-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.



Desired Skills:

-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems.Verbal and written communication.

-Project management skills and MS Office applications ( Word, Excel).

-Experience with Maestro, Delmia and Windchill are preferred, not required.

-Aerospace experience preferred but not required.



Keywords:

-Manufacturing Engineer

-Propulsion components

Education:
BS degree in Manufacturing /Industrial Technology or Engineering required

Skills:
Required

MANUFACTURING ENGINEER AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 10/23/2017 Hours Per Week: 40.00
Est. End Date: 04/22/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A7347633
Job Location: Canoga Park, CA
Rate: 48/hr max
Per Diem: no
Duration: 6 month contract
Input Date: 08/28/2018
Last Updated: 09/11/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Location: Brunswick, GA
Rate: $62.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Background in BOM and drawing analysis as well as knowledge of CATIA and Corridor preferred.

Other Requirements: 1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. 2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc. 5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable. 6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 19. Author DRDI/DMT rework instructions to support effective corrective actions. 20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 7. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed. 8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc. 9. Keep current on state-of-the-art manufacturing developments. 10. Incorporate Lean Manufacturing Methodology into existing and future processes. 11. Develop business case and present to management for process improvement approval. 12. Assume the duties of the ME Group Head in his/her absence. 13. Assign and review work of subordinate personnel. 14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems. 15. Lead/coordinate the implementation of projects between multiple orgs. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.
 
Job Number: 8938
Job Location: Brunswick, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 104
Job Location: CA
Duration: 6-9 Months
Start Date: ASAP
Input Date: 04/05/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 2 year contract
Shift: 1st Shift

**Must be a U.S. Citizen or Permanent Resident**

Job Description:
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
- This is an individual contributor level position.
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor’s Degree
- 8-15 years’ experience desired.
- The candidate must be a US person.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 8285
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: NO
Overtime: Possible
Duration: 2 yr
Input Date: 03/07/2018
Last Updated: 04/13/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Independence, OH
Rate: $48.25 - $60.00/HR
Duration: 1 year contract position
Shift: 1st Shift
No Per Diem Split


**MUST be a U.S. Citizen**

**MUST have Catia V5 Detailed modeling and FTA generation, layouts and checking experience**

**MUST have experience with Landing gear and or hydraulic actuators**

**MUST have a BS IN MECHANICAL ENGINEERING OR A BS IN AEROSPACE ENGINEERING**

Job Description:
Design project lead in research, design, and development of mechanical applications to the design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Design Lead Engineer will be responsible for developing complete Landing Gear layouts in response to customer requirements and design methodologies. This will involve conducting and documenting trade studies, developing complete Landing Gear design layouts, and provide input/guidance to the customer for landing system procurement specification development and maturation during the joint development phase of the program.


Requirements:
- BS IN MECHANICAL ENGINEERING OR A BS IN AEROSPACE ENGINEERING and 10+ years of experience and US Citizen status is required.
- Knowledge of PDM (Smarteam, MatrixOne, Team Center) systems, Catia V5, & MS programs (Word, Excel, Project, Power Point).
 
Job Number: 8462
Job Location: Independence, OH
Rate: $48.25 - $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Brad Becker
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer SECRET CLEARANCE needed UTAH

Description:
Active Secret DoD Clearance within 5 ½ years of last investigation
Bachelor’s Degree in Aerospace, Mechanical or Manufacturing
Experience in working with aerospace specifications and drawings
Experience in the use of ANY CAD systems (NX -preferred)
Experience designing / supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment
Knowledge of root cause / corrective action processes and techniques
Functional knowledge of Process Failure Modes and Effects Analysis (PFMEA)
Functional knowledge of production control systems (SAP/Visual Mfg/etc)
Experience authoring, modifying and auditing procedures
Experience estimating, planning, and streamlining manufacturing processes
Experience using SPC to monitor and improve processes
Experience addressing manufacturing discrepancies through a formal MRB process
Good organizational skills and ability to work with minimal direction
Excellent computer skills. Skilled in working with Microsoft Office applications
Strong problem solving skills
Excellent verbal and written communication skills
Preferred Skills and Experience:
Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience
 
Job Number: 2963
Job Location: promontory, UT
Rate: 60-100+ / Hr
Per Diem: YES
Overtime: Possible
Duration: 6 - 12 months
Start Date: 2/3 weeks
Input Date: 04/13/2018
Last Updated: 08/21/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / Engineer - Vehicle Braking Components

Description:
One of the world's leading heavy-truck manufacturers is looking for a Mechanical Engineer to join their team!

The Brakes Systems group works is a member of the Chassis and Powertrain Engineering department and works to develop and design wheel-ends, brakes, brake-related control systems, air distribution systems, air reservoirs, and the architecture that supports air and wiring harnesses across the vehicle chassis. The main function of a mechanical engineer is to research and investigate the design, functionality and maintenance of mechanical products, equipment, systems and processes. A typical mechanical engineer has the ability to make engineering drawings, and read and interpret blueprints.


Essential Duties and Responsibilities:

Design and detail vehicle components and systems.
Interface with Engineering Analysis personnel to determine the most effective and economic materials to be used in product systems and components.
Interface with Test & Development personnel to identify and analyze problems encountered in prototype development and testing.
Provide creative technically feasible solutions.
Interface and coordinate with Purchasing, Vendors, Manufacturing, and other Engineering personnel in the bills of materials, value analysis and testing phases of product development.
Evaluate state of the art developments in the vehicle industry and apply the latest advances.
Apply statistical and engineering techniques in designing and testing.
Use programming and modeling techniques in conjunction with mathematical analysis.
Interface with Product Regulation and Compliance personnel to design vehicles that meet government regulations, restrictions, and codes.

Qualifications:

MS degree or BS degree in mechanical engineering, or commensurate work experience.
0-2 years of experience in product engineering design areas required.
CAD experience required. NX experience preferred.
Creativity, verbal and written communication skills, analytical and problem solving ability.
Team player and detail oriented.
Knowledge of pneumatic systems, including air compressors, air dryers, and pneumatic tubing and fittings preferred.
Experience with manufacturing processes, MRP systems, and coding for design solutions (VBA, MatLab, etc) preferred.
Knowledge of vehicle brake systems for commercial vehicles - primarily air brakes – and related regulatory requirements preferred.
 
Job Number: 4752
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 24 months
Start Date: ASAP
Input Date: 04/03/2018
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designers - Refinery Experience (OK)

Description:
Mechanical Designer:
Looking for two mechanical designers. These designers would need to have 5 to 10 years of experience.

Primary Functions/Responsibilities:

Safety:
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, accountable, and will deliver on all commitments

Responsibility:
Provide design and drafting expertise to develop, mechanical detail design packages for projects

Provide quality design packages that satisfy the Refinery Standards and Guidelines

Must be able to create a design schedule and complete projects in a timely manner

Strong project and CAD experience; (MicroStation experience a plus)

Must be able to gather field data and measurements
Must be able to climb stairs and ladders
Strong team player
Candidate will review and check vendor drawings

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-51184OKPCR
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - but a PD Split is possible
Overtime: Yes, as needed
Duration: 11 Months or longer
Start Date: 5/14/2018
Input Date: 06/25/2018
Last Updated: 06/25/2018
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer needed for an immediate full-time opportunity with our client in the Burlington MA area. 



Job Summary 

We are currently looking for a world-class Mechanical Engineer (Mechanisms) to join our development team. Candidates should be self-starters who bring positive attitude, integrity, and enthusiasm to our team as we transform personal transportation.



Job Responsibilities 

  • Design, analysis, and system integration of the throttle and gear selection controls, including:

  • Combining mechanical and throttle-by-wire engine control mechanisms;

  • Developing the gear selection mechanism to interface with the hybrid powertrain;

  • Defining mechanism degrees of freedom, latching states, and sensor interfaces;

  • Supporting sensor selection/integration for sensing commanded vehicle state;

  • Material selection and mechanism designs for durability, low weight, and simplicity;

  • Integration of the throttle and gear selection mechanisms with operator ergonomics.

  • Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

  • Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD&T;

  • Perform analyses, via hand calculations, kinematic simulations, and FEA, to validate designs;

  • Support and participate in testing activities – component, drive, and/or flight – as needed, including test plan creation, data analysis, and test report generation and documentation;

  • Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.


Qualifications:


  • Bachelor’s degree in Mechanical or Aerospace Engineering and 5+ years technical work experience, or;

  • Master’s degree in Mechanical or Aerospace Engineering and 3+ years technical work experience.

  • Advanced SolidWorks experience – including SolidWorks Motion tool;

  • Demonstrated experience designing robust, lightweight mechanisms for vehicles including operator controls;

  • Expertise performing static and kinematic analyses for mechanical systems;

  • Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

  • Proven definition or production of manufacturing drawings including selection of dimension tolerances;

  • Familiarity with material selection to meet strength, weight, durability, and cost targets;

  • Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;

  • Outstanding organization, analytical, and problem solving skills;

  • Excellent written and verbal communication skills, as well as presentation skills;

  • Familiarity with basic shop tools (hand, power, mill, lathe, etc.).


Highly Desired Qualifications


  • Hands-on experience installing automotive/aircraft throttle mechanisms, gear selectors, or propeller controls;

  • Proven ability to select appropriate bearing types/sizes, implement latches, and design linkages;

  • Familiarity integrating Hall Effect sensors, proximity, or contact switches to sense mechanism state (position);

  • Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD&T);

  • Background in designing with aerospace grade materials including fiber reinforced composites;

  • Exposure to ANSYS Workbench, FEMAP/NASTRAN, or any similar sophistication FEA software;

  • Familiarity with MSC Adams or similar sophistication rigid-body kinematics simulation software;

  • Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

  • Familiarity with 49 CFR 571 regulations;

  • Familiarity with ASTM F2245 regulations.



 
Job Number: 18-13347
Job Location: Burlington, MA
Rate: 105000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 04/04/2018
Last Updated: 05/07/2018
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer (Rotating Machinery) to join our development team. . As a key contributor, you will work within the Drivetrain group to design, analyze, and participate in system integration activities for the products road-mode drivetrain.



Job Responsibilities:



• Design, analysis, and system integration activities for flight-mode drivetrain, including:

• Mechanical loads definition;

• Engine-to-propeller power transmission;

• Engine-Generator mechanical coupling;

• Material selection for durability and low weight;

• Propshaft, couplings, and shaft-driven rotating accessories;

• Integration of the flight-mode drivetrain with the airframe structure.

• Participate as a key player in the design-build-test process, including conceptual, preliminary and detailed design, requirements definition, design reviews, prototyping, and testing;

• Coordinate and communicate effectively with other engineers, technical personnel, management, and external suppliers;

• Provide CAD work in support of design activities, direct drafting and product definition staff in the application of manufacturing drawing best practices, and define appropriate GD

• Perform analyses, via hand calculations and FEA, to validate designs;

• Support and participate in testing activities as needed, including test plan creation, data analysis, and test report generation and documentation;

• Support the Certification Director with compliance and certification activities including design, test, and analysis documentation, internal and external audits, and other activities as needed.





Qualifications:



• The candidate must have:

• A Bachelor's degree in Mechanical, Automotive, or Aerospace Engineering and 5+ years technical work experience, or;

• Master's degree in Mechanical, Automotive, or Aerospace Engineering and 3+ years technical work experience.

• Advanced SolidWorks experience; • Proven experience in rotating machinery/drivetrain design;

• Familiarity with established design techniques to mitigate rotating imbalance;

• Expertise performing static and/or modal analyses for mechanical systems;

• Experience with finite element analysis in SolidWorks Simulation or an equivalent embedded FEA tool;

• Proven definition or production of manufacturing drawings including selection of dimension tolerances;

• Familiarity with material selection to meet strength, weight, durability, and cost targets;

• Proven experience with rapid design cycles: taking a design from concept through detailed design, build, and test;





Highly Desired Qualifications:



• Hands-on experience (work or personal) with rotating machinery assembly/disassembly;

• Proven ability to select appropriate bearing types/sizes, shaft splines, and mechanical couplings for drivetrains;

• Formal training and professional experience with Geometric Dimensioning and Tolerancing (GD • Background in designing with aerospace grade materials including fiber reinforced composites;

• Exposure to ANSYS Workbench, FEMAP/NASTRAN or any similar sophistication FEA software;

• Exposure to low or medium volume production environments, particularly in automotive or aerospace industry;

• Familiarity with ASTM F2245 regulations;

 
 
Job Number: 18-13398
Job Location: Woburn, MA
Rate: 105000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-04-04 00:00:00.0
Input Date: 04/04/2018
Last Updated: 05/07/2018
Firm Name: NESCO RESOURCE
Attention: Dan Regan
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer SECRET CLEARANCE needed UTAH

Description:
Job description:
Experience in the use of ANY 3-D CAD system (NX Preferred)
Aerospace assembly and component installation experience e
Structural and non-structural bonding experience
Support assembly and installation of composite and metallic components into larger aerospace assemblies. Work closely with operations personnel to develop manufacturing solutions and solve production issues component and sub assembly installation, line drilling, power feed drilling, fastened assembly of composite and metallic structures, structural and non-structural bonding, hydraulic component installation, electrical component installation, and functional test of electrical and hydraulic systems. Learn and understand requirements to determine product impacts and recommend disposition of the parts. Work in a cross functional team to develop and implement process improvements.
Requirements & Qualifications:
•Active Secret DoD Clearance needed
 
Job Number: 2985
Job Location: promontory, UT
Rate: 60-100/ hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months
Start Date: 2/3 weeks
Input Date: 04/13/2018
Last Updated: 10/04/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Mechanical Systems Design & Analysis Engineer 4
(U.S. Citizenship Required*)
Mesa, AZ
2018-5752

Responsibilities:
• Lead and provide technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design.
• Lead activities to validate and verify mechanical and fluid systems requirements.
• Lead development, maintenance or modification of system components' designs/proposals to provide installation and detail documentation.
• Perform and document analyses.
• Manage supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals.
• Prioritize, delegate and track performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems, selecting appropriate methods to validate or assess the design.
• Support proposal preparation and new business development efforts.
• Train and coach others. Work under minimal direction.
• Travel up to 10%

Qualification:
• Highly experienced and skilled Mechanical systems design engineer with experience, knowledge and excellent usage of 2 major 3D CAD/CAM systems: Catia v5/Enovia and UG-NX/Team center
• Catia v5 - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, Relational models, IRMs, ARMs, CARMs, and the IVT tool
o Experienced and skilled in working with Commercial Enovia PDM tool
o Experienced and skilled in working with Commercial processes and procedures, such as releasing technical data packages through the BCA release process
• UG-NX - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, CLOs, ALOs, ICMs, Fly-Through models
o Have experience with BDS – military Team Center (TcE) PDM and BDS’s - release processes
o Experienced and skilled in using with BDS – military/space Team Center PDM tool
o Experience and skilled in with BDS – military/space processes and procedures, such as releasing technical data packages through the BDS release process.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from an ABET accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5752
Job Location: Mesa, AZ
Rate: Based on experience
Duration: 9 Months
Input Date: 04/02/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer III - (Seal Beach)

Description:
Supports the computer-aided design (CAD) development and documentation of mechanical, hydraulic , propulsion and flight controls Maintenance Ground Operations Systems (MGOS) ground support equipment (GSE) tooling design. Supports the development, testing and/or modification of GSE systems, components and installation designs/drawings to provide design documentation to downstream groups. Proficient with Geometric Tolerancing and Drawing Release (PDM / ENOVIA).Generates GSE CAD 3-D models (in CATIA V5) and documents analyses to validate and verify GSE and components meet requirements and specifications. Produces First Pass Quality (FPQ) GSE designs and drawings per MGOS standards, processes and Desk Instructions. Contributes to supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Supports system components'' designs/proposals standards to provide installation and detail documentation. Trains others.

ACS Group (formerly 'Comforce')
 
Job Number: MechEngSB
Job Location: Seal Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/28/2018
Last Updated: 05/11/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer IV - (AZ)

Description:
Leads and provides technical quality review of the development and documentation of mechanical and fluid systems and thermal environment to establish the system design. Leads activities to validate and verify mechanical and fluid systems requirements. Leads the development, maintenance or modification of system components'' designs/proposals to provide installation and detail documentation. Performs and documents analyses. Manages supplier development, test and production activities and directs the supplier to optimize integration and achieve program goals. Prioritizes, delegates and tracks performance and documentation of analyses of mechanisms/landing gear/ordnance components and systems selecting appropriate methods to validate or assess the design. Supports proposal preparation and new business development efforts. Trains and coaches others.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Highly experienced and skilled Mechanical systems design engineer with experience, knowledge and excellent usage of two (2) major 3D CAD/CAM systems; (1) Catia v5/Enovia and (2) Unigraphics UG-NX/Team center
• Catia v5 - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, Relational models, IRMs, ARMs, CARMs, and the IVT tool
o Experienced and skilled in working with Client's Enovia PDM tool
o Experienced and skilled in working with Client's processes and procedures, such as releasing technical data packages through the release process

• UG-NX - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, CLOs, ALOs, ICMs, Fly-Through models
o Have experience with – military Team Center (TcE) PDM and Client's - release processes
o Experienced and skilled in using with – military/space Team Center PDM tool

ACS Group (formerly 'Comforce')
 
Job Number: MechEngAZ
Job Location: Mesa, AZ
Rate: up to $55/hour
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Structural Engineer

Description:
Project Overview: Our computational challenges are so big and unique we can't just buy our hardware, we've got to make it ourselves. Our Platforms Team designs and builds the hardware, software and networking technologies that power all of our services

Overall Responsibilities

The progress of the key responsibilities.
Work with cross organization team to develop mechanical and structural systems.
Prepare technical reports.
Communicate technical results to documentations and presentation.
Top 3 Daily Responsibilities: Evaluate new product designs, define structural requirements and design strategy based on applicable standards and guidelines,

Perform design/analysis calculations for structural steel, sheet metal assemblies, mechanical components with minimum or no supervision. Support interdisciplinary projects, manage multiple structural evaluations, provide cost estimates and communicate technical report and presentations and assist design team in

Required Qualifications:

Bachelors degree in Civil or Mechanical Engineering with an emphasis on structural design.
Minimum 3 years experience in Structural Engineering and related areas
Proficient knowledge of CADD tools (AutoCAD, Visual Analysis, STAAD/RAM, etc.) for efficient
production of engineering work.

Able to read design/construction drawings and be able to understand design narratives and
calculations

Strong communications skills - ability to work directly with internal and external teams
Design experience with structural steel, mechanical systems and components.
Self-motivated with ability to work in a team environment.
High level of attention to detail.
Nice to have

Masters degree in Civil or Mechanical Engineering with an emphasis on structural design. P.E. licensed Experienced with AISC Steel Manual, ACI 318, and ASCE 7. (This is a good pointer for nice to have)

Experience with AutoCAD, Creo or Solidworks.

Knowledge of Excel, and STAAD Pro (or other modeling software) a plus.

Exposure to construction means and methods.

Ability to meet required deadlines while simultaneously completing other tasks.

Experience working with other disciplines understanding their interface requirements.
 
Job Number: 385535
Job Location: Seattle, WA
Input Date: 04/02/2018
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Layout Designer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

PCB Layout Designer
(US Citizenship Required*)
Bloomington, MN
2018-5767

Join our team as PCB Layout Designer to assist engineers in designing and developing complex, detailed layouts of printed circuit boards used in airborne and other demanding environments. You will create multilayer high-density printed circuit board designs using Mentor Graphics tools (Expedition PCB Layout, Autorouter, Drawing Editor, DMS, etc.) per Electrical and Mechanical Engineering input in a highly structured development environment. The fabrication drawing package will be created per IPC and/or Mil spec.

Responsibilities:
• Perform detailed layout design and documentation of printed circuit boards
• Produce two-dimensional (2D) CAD work product output for fabrication and assembly
• Work from schematics, net lists, part lists, and basic description of the board function, constraints, configuration, and arrangement as defined by engineering
• Check drawings versus the project input for correctness and conformance to standard engineering drafting practices and standards
• May create electronic library symbols, geometry, footprints etc. using Mentor Graphics DMS
• May work with system management including file maintenance, backup and storage
• Work under minimal supervision

Qualifications:
• Experience designing high-count multilayer complex printed circuit boards
• Min. 3 years’ experience specifically using the most recent and current Mentor Graphics tools:
o DxDesigner/Expedition PCB
o Autorouter
o DMS
o Valor (artwork checking tool)
o Constraint Editor/Constraint Manager (CES)
o Drawing Editor
• Be well versed in Mil and IPC Standards

Preferred:
• Teamcenter Archive tool experience
• Rigid-Flex layout knowledge
• Distinct knowledge of material requirements, fabrication techniques, and manufacturability concepts
• Distinct knowledge of design principles and techniques including computer aided design (CAD)
• Distinct knowledge of the strategic CAD and file management tools
• Demonstrates initiative, applies personal talent to practical solutions
• Works within the trade space defined (cost / schedule / technology)
• Able to accept and integrate constructive feedback
• Demonstrates the ability to weigh risks and make progress in the face of uncertainty
• Willingly takes on problems and commits to solutions
• Distinct written and verbal communications skills
• C.I.D. (Certified Interconnect Designer) is a plus
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelors of Science degree or Technology degree, a related specialized area or field is required (or equivalent experience) plus a minimum of 8 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5767
Job Location: Bloomington, MN
Rate: Based on experience
Duration: 6 Months
Input Date: 04/04/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeff Prukop
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst II

Description:
PLM Configuration Analyst II

Savannah, GA
Long Term Contract
Pay Rate: DOE

1st Shift

Unique Skills:

Problem Resolution Opportunities: Strong interpersonal, organizational, communications, requirements analysis, technical writing and problem-solving skills are required. Strong customer relationship management skills. Experience Requirements: Proficiency in CAD modeling utilizing CATIA V5 with emphasis on structural or mechanical design Essential Job Functions: PLM apps user support with primary focus on CATIA V5 users Provide solutions to end user identified technical problems in support of the PLM environment. Support the development and execution of business test scenarios to validate PLM system updates.

Education and Experience Requirements:

Bachelor's Degree in Engineering, Computer Science or a related curriculum required or or an equivalent combination of appropriate education and experience sufficient to successfully perform the essential functions of the job. 3 years of engineering or IT experience. 1 year experience with CAD and/or PDM tools (CATIA and ENOVIA SMARTEAM preferred.). 1 year Database experience, data migration/conversion or related experience preferred..

Position Purpose:
Under minimal supervision, perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Perform tasks to ensure PLM systems integrity and manage all product configuration data and information throughout the products lifecycle. Provide support for the development of training courses for CAD and PLM Applications.

Principle Duties and Responsibilities:

Essential Functions:

1. Execute plans, according to schedules, for engineering assignments. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Coordinate activities for lower level engineering staff assigned to specific projects. 4. Actively work to improve daily processes, to ensure all CAD and PLM systems meet customer requirements. 5. Analyze user needs to determine engineering and product data requirements, CAD and PLM functional requirements, and perform analysis as well as process and data modeling to meet user needs. 6. Recognize discrepancies and/or problems with analysis, process mapping or system implementation results and work toward corrective action. 7. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 8. Develop system queries and utilities to support users information researches 9. Assist in the testing and implementation of new deployment or revisions to the CAD and PLM systems. 10. Execute tasks for producing Product Structure and Engineering Bill of Material for use in production and QA. 11. Execute tasks for coordinating the release of product definition data, change management and product configuration management, including quality control and change reporting. 12. Ensure proper security, archiving and audibility of product releases. 13. Analyze, monitor and report business and system status metrics.

Additional Functions:

1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:

1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
Languages Required (in addition to English): None
 
Job Number: 8931
Job Location: Savannah, GA
Rate: DOE
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 06/04/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
PLM Configuration Analyst III

Location: Savannah, GA
Pay Rate: $57/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
-Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Six (6) years of engineering or IT experience required.
-Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
-3 years of Database experience, data migration/conversion or related experience preferred.

Position Purpose:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities/Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Direct activities for lower level engineering staff assigned to specific projects. 4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 6. Determine user needs and utilize system queries and utilities to support users information research. 7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems. 8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 8822
Job Location: Savannah, GA
Rate: 57
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/28/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy

Unique Skills:
• Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
• Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required.
• Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
• 3 years of Database experience, data migration/conversion or related experience preferred.

Principle Duties and Responsibilities:
• Create plans according to schedules, for engineering assignments, and act independently to carry them out.
• Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
• Direct activities for lower level engineering staff assigned to specific projects.
• Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs.
• Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
• Determine user needs and utilize system queries and utilities to support users information research.
• Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
• Design and develop business reports and system status metrics.
• Provide training on new functionalities and upgrades.
• Ensure compliance with FAA regulatory requirements for management and control of all type design data.
• Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
• Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
• Previous experience with digital pre-assembly of product components (aerospace preferred).
• Experience in process mapping and other process improvement techniques preferred.
• Familiarity with computer-aided design, manufacturing and product data management systems.
• Basic knowledge of design engineering and manufacturing engineering applications and processes
• Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
• Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 24-237
Job Location: Savannah, GA
Rate: $57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 08/13/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SCA Technical Writer

Description:
A Technical Writer with C130J and aviation TCTO's familiarity is ideal for this position! Our client, a well-known company in the aerospace industry is ready to bring new talent to their team! Apply to have an opportunity to join them!

The ideal candidate for this position will perform the following tasks:
* Writes, rewrites and/or edits technical documents
* Acquires subject knowledge by interviewing product developers, observing performance of production methods, referring to technical specifications, blueprints, engineering illustrations, and trade journals.
* Oversees preparation of illustrative materials, selecting drawings, sketches, diagrams and charts.
* Conducts quality review of materials.

Mandatory Qualifications and Experience:
* C130J familiarity
* Reading Engineering drawings
* Familiarity with aviation TCTO's
* Must be able to obtain a secret clearance

Desired Qualifications and Experience:
* Corel software experience
* CAD software experience (CATIA, Solidworks, autocad)

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 127615
Job Location: Lexington, KY
Start Date: ASAP
Input Date: 04/16/2018
Last Updated: 05/01/2018
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Mechanical Engineer

Description:
Sr. Mechanical Engineer
Wilsonville, OR
6 month contract



The Manufacturing Engineering team is responsible for all mechanical engineering tasks related to the test and process flow of aerospace head-up display and guidance products. This position requires knowledge of engineering theory and principles to determine packaging solutions for electronic, electromechanical and optical test equipment. Our engineers are responsible for ensuring products are safe and comply with our client's standards.

Job Responsibilities
•Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable
•Perform autonomously under the direction of team leaders, program management and engineering management
•Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach
•Contribute to schedule creation and ensure schedule commitments are met
•Create and present program and/or task status presentations to team members and engineering management
•Create and present clear and concise technical descriptions to engineering leadership and customers
•Mentor junior engineers and provide guidance to design manufacturing team members
•Provide input to design and document reviews
•Spearhead investigations for open ended complex problems
•Develop detailed hardware requirements based on product theory, system level requirements and customer requirements
•Complete designs that meet documented hardware requirements
•Create test procedures to support the testing of products to industry and government standards
•Review hardware defects and identify systemic root causes and process improvements

Basic Qualifications
•Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering
•Experience in mechanical engineering design and development
•Knowledge of engineering materials and processes
•Experience with structural and thermal management design
•Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)
•Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles
•Strong technical, analytical and problem solving skills
•Ability to effectively communicate throughout all levels of the organization

Additional skills or experience a plus:
•Packaging of electronic and/or precision optical systems
•Design of manufacturing, calibration and test support equipment
•Aluminum fabrication techniques including: machining & investment casting
•Experience in avionics or aerospace industry
 
Job Number: 53738
Job Location: Wilsonville, ORE
Rate: 45.00
Per Diem: Possible
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 04/09/2018
Last Updated: 04/20/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payloads Design Engineer IV - (AZ)

Description:
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Assists with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Highly experienced and skilled technical designer with experience, knowledge and excellent usage of two (2) major 3D CAD/CAM systems; (1) Catia v5/Enovia and (2) UG-NX/Team center
• Catia v5 - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, Relational models, IRMs, ARMs, CARMs, and the IVT tool
o Experienced and skilled in working with Client's Enovia PDM tool
o Experienced and skilled in working with Client's processes and procedures, such as releasing technical data packages through the release process

• Unigraphics UGNX - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, CLOs, ALOs, ICMs, Fly-Through models
o Have experience with – military Team Center (TcE) PDM and BDS’s - release processes
o Experienced and skilled in using with – military/space Team Center PDM tool

ACS Group (formerly 'Comforce')
 
Job Number: StructPayIVAZ
Job Location: Mesa, AZ
Rate: up to $55/hour
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 04/03/2018
Last Updated: 06/01/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Conceptual Structural Design Engineer who is proficient in aircraft conceptual and preliminary structural design, layout, and sizing. The position is within the fast paced and wide reaching Advanced Design team. Familiarity, and willingness to learn, with all speed regimes (subsonic, supersonic, hypersonic) and vehicle configurations (general aviation, fighters, helicopters, spacecraft) is highly recommended. Ultimately responsible for providing initial program direction on structures with appropriate level of fidelity and manufacturing considerations in mind.
Plays an integral role in all structural designs for the Advanced Design team
Perform aircraft conceptual and preliminary structural design and analysis
Perform trade studies (weight, performance, structural sizing)
Coordinate with the structural design and stress analyst teams on guidance of proper analysis methods.
Reviews, updates, and compiles engineering analytical definition of structural components and assemblies for a variety of projects
Supports development of manufacturing plans and procedures to ensure compliance with design and loads requirements
Supports the creation of structural test plans which will be used to verify manufacturing
Perform customer presentations, engineering reports, specifications and proposal writing

Desired:
NASTRAN,CATIA,SOLIDWORKS

Requirements:
Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
Prefer 7+ years of experience in aircraft conceptual and preliminary design
Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
CAD experience (CATIA V5 and/or SolidWorks) is preferred
Knowledge of composites manufacturing -- hands-on experience with composites part fabrication and assembly processes a plus.
Experience in the analysis of structural systems using strength of materials and finite element based methods
Experience with free-body diagrams and classical stress analysis techniques
Knowledge of composite structural analysis and sizing using classical and finite element methods
Experience with composite finite element modeling including pre and post processing of NASTRAN models -- proficiency in FEMAP a plus
Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
Excellent verbal and written communication skills
Excellent organizational skills and problem-solving skills
Strong team player
Excels in a fast-paced environment with loosely defined problems
Excellent computer skills, including Outlook, Word, Excel and PowerPoint
Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 192
Job Location: CA
Rate: Up to $65.00-DOE
Duration: 9+ Month
Start Date: ASAP
Input Date: 04/18/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/22/2018
Last Updated: 12/11/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design with active secret / Catia V5 CA

Description:
160829
Requirement#AERO-REQ-0732
Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
Work Week9/80-A
PriorityHigh
Needed Date01/09/2018
End Date01/09/2019
Number of Resources1
Security ClearanceSecret

TitleStructural Design-N
Description
Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
Skill/Experience/Education
Mandatory:

Active Secret security clearance.--

This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
Desired:

Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



Interview Required
OT Allowed
Non-Exempt
Rate TypePer Hour
Rates
5-8 YrsPay Rate: 90.00 USD
9+ YrsPay Rate: 95.00 USD
 
Job Number: JE-0732
Job Location: Palmdale, CA
Rate: 90-95/hr max
Per Diem: no
Duration: 12 month contract
Input Date: 06/28/2018
Last Updated: 07/02/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structure & Payload Design Engineer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Structure & Payload Design Engineer 4
(U.S. Citizenship Required*)
Mesa, AZ
2018-5755

Responsibilities:
• Develop, integrate, and document structural and interior payload system requirements to establish system design.
• Develop, maintain, and modify structural and interior payload system and component designs, using 3D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle.
• Lead performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications.
• Manage supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals.
• Assist with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements.
• Work under minimal direction.

Qualification:
• Highly experienced and skilled technical designer with experience, knowledge and excellent usage of 2 major 3D CAD/CAM systems: Catia v5/Enovia and UG-NX/Team center
• Catia v5 - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, Relational models, IRMs, ARMs, CARMs, and the IVT tool
o Experienced and skilled in working with Commercial Enovia PDM tool
o Experienced and skilled in working with Commercial processes and procedures, such as releasing technical data packages through the BCA release process
• UG-NX - 3D CAD/CAM tool, tool suite with knowledge and experience creating MBDs, CLOs, ALOs, ICMs, Fly-Through models
o Experience with BDS – military Team Center (TcE) PDM and BDS’s - release processes
o Experienced and skilled in using with BDS – military/space Team Center PDM tool
o Experience and skilled in with BDS – military/space processes and procedures, such as releasing technical data packages through the BDS release process.
• Advanced skill in Design, with Engineering/Design Commodity Group experience
• Skill in Engineering Design Principles, Resign Release & Change Processes, Manufacturing for Design, User Interface Design, and Relational Database design & management.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience.
• Degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5755
Job Location: Mesa, AZ
Rate: Based on experience
Duration: 9 Months
Input Date: 04/02/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Design 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Technical Design 4
(U.S. Citizenship Required*)
Mesa, AZ
2018-5753

Responsibilities:
• Lead development and maintenance of mechanical/structural engineering product definition.
• Oversee development & design of layouts, and modification of existing designs to satisfy customer and production requirements.
• Develop product definition based upon requirements and parameters.
• Coordinate product definition development with internal/external parties to ensure compliance with applicable standards, requirements and design parameters as well as product functionality.
• Integrate work statement, scope and transfer packages with internal and external customers to requirements.
• Oversee, direct, and integrate product definition data packages, requirements and parameters across internal and external business partners and products to provide a functional end-product.
• Investigate and resolve complex manufacturing process or engineering related issues.
• Verify accuracy of technical and non-technical data produced by others.
• Develop, validate, and maintain new processes and procedures to increase productivity and reduce costs.
• Work under minimal direction.
• Travel up to 10%

Qualification:
• Intermediate skill in Engineering Design Principles, User Interface Design, Relational Database Design & Management.
• Advanced skill/experience in Design for Manufacturing, CAD, 3D Models, and Design Release & Change Processes
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-5753
Job Location: Mesa, AZ
Rate: Based on experience
Duration: 9 Months
Input Date: 04/02/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer I

Description:
Tech Designer I

Location: Savannah, GA
Pay Rate: $26/hr - $29.13/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
-Associate degree in electrical engineering preferred.
-Experience with aircraft system wiring diagrams preferred.
-Experience with Mentor Graphics CHS or AutoCAD preferred.

Education and Experience Requirements:
-Associates degree in drafting, design, engineering, manufacturing technology, or equivalent combination of education/experience sufficient to successfully perform the essential job functions.
-Two (2) years related experience.
-Familiarity with computer-aided design systems and basic personal computing. Basic knowledge of engineering, engineering procedures and design drawing standards.

Position Purpose:
Under direct supervision, performs a variety of basic engineering tasks in a specialized area, receiving instruction as to the tasks required and the expected results. Prepares and maintains electronic datasets for engineering drawings with the assistance and direction of more experienced engineering personnel.

Principal Duties and Responsibilities/Essential Functions:
1. Applies knowledge of common design and drafting principles, guidelines, specifications and standards to create basic electronic layouts, sketches, models, and drawings.
2. Obtains form, fit and functional data and verification from engineers or senior designers.
3. Coordinates drawing requirements and release with engineers and senior engineers.
4. Reconciles and integrates the input of engineers.
5. Develops and recommends alternatives to simplify and clarify design intent.
6. Incorporates information from sketches, notes, layouts and markups to produce graphic representations of designs using computer-aided design tools (Mentor Graphics, Oracle, Cadam, Catia, etc.).
7. Reviews work for accuracy and completeness prior to drawing check.
8. Follows established procedures to produce and revise electronic datasets.

Additional Functions:
1. Takes on special projects as assigned.
2. Performs other duties as assigned.

Other Requirements:
1. Good analytical, interpersonal, communication and visualization skills.
2. Ability to work both independently and in a team environment.
 
Job Number: 8815
Job Location: Savannah, GA
Rate: 26-29
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/27/2018
Last Updated: 05/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Position Summary: This position will work with the Engineering and Manufacturing teams and will ensure the successful integration of each design element with production. This individual will work both independently as well as part of a team to complete projects related to the production of aircraft components, assemblies and installations involving metallic and composite assemblies. The individual will lead and coordinate projects to eliminate defects and reduce costs. The individual should be proficient in systems routing, finishes, human factors, structural assembly, and manufacturing processes. The individual will work on continuous improvement and corrective action while coordinating and with Engineering, Quality, M&P, Tool Services, Production, MTE, and Production Control. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

Demonstrate advanced knowledge of standard concepts, practices, and procedures within aerospace.
Communicate with suppliers, translate technical information and ensure compliance to standards and requirements.
Tackle complex multi-faceted problems with competing requirements under significant schedule constraints.
Identify critical issues, perform risk assessments and communicate impact to stakeholders.
Directs work of others and acts as a lead.
Supporting manufacturing with technical issues, e.g. design, documentation, specifications etc.
Tooling implementation.
Continuous improvement, cost out initiatives, process flow improvements
Transfer of product between facilities to maximize efficiencies.
Key interface between supporting departments and manufacturing e.g. Quality, Engineering.
Engage in the completion of safety risk assessment, ergonomics, to maintain a safe working environment.
Perform other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 10+ years of experience in the Aerospace Industry or the equivalent in training, education and experience.
Requires proficiency using CATIA V5.
Highly competent using MS Office products.
Strong leadership ability and excellent communication skills are necessary.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to lift and/or move up to 10 pounds. Will need to be able to move throughout the office or production facility and communicate with other employees and management. Work will be performed in an office and production facility environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
must be detail-oriented and proficient in at least one of the following design software packages: Pro Engineer Creo, SolidWorks, Autodesk Inventor, NX Unigraphics. He/she must have a strong knowledge base in various sectors of manufacturing--particularly welding and machining. A general understanding and application of Geometric Dimensions and Tolerances (GD&T) is required.

Produces 3D CAD models and 2D technical drawing packages from specified instructions using standard design procedures for the development of new components, assemblies, systems, or subsystems. Conceptualizes and designs a variety of tooling and fixtures for use in a production environment, including weld templates, drill jigs, assembly fixtures, holding fixtures, lifting devices and checking fixtures
 
Job Number: 41897
Job Location: PA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 09/13/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / Product Definition - Level III

Description:
Location: Canoga Park, CA
Rate: $50.00/HR
Duration: 3+ month contract
Shift: Regular 40 hour week. OT possible

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates should have at least 3 years of experience **
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development and checking of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.


Skills:
-Must possess advanced knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 is required with advanced modeling skills including surfacing) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of Windchill PLM functionality for CAD data management and drawing release preferred.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-Knowledge of castings and airfoil parts is a plus.
-May require the use of various computer systems to produce data, analysis and reports.


Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.
-Product Definition (Drafting) specialists will be considered with requisite modeling and drawing creation skills and appropriate education and/or experience.
 
Job Number: 8322
Job Location: Canoga Park, CA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3+ mos
Start Date: ASAP
Input Date: 03/02/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / Product Definition - Level III URGENT CA

Description:
Job Title: Turbomachinery Mechanical Design Engineer / Product Definition - Level III

Number of Positions: 5

Remaining Positions: 4

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates should have at least 3 years of experience **





-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development and checking of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Must possess advanced knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 is required with advanced modeling skills including surfacing) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of Windchill PLM functionality for CAD data management and drawing release preferred.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-Knowledge of castings and airfoil parts is a plus.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.

-Product Definition (Drafting) specialists will be considered with requisite modeling and drawing creation skills and appropriate education and/or experience.

Skills:
Required
GEOMETRIC TOLERANCINGGEOMETRIC DIMENSIONINGAEROSPACE DESIGNCREO

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7517058
Job Location: Canoga Park, CA
Rate: 50/hr max
Duration: 6 months
Input Date: 04/09/2018
Last Updated: 04/24/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Back to Advanced Job Search