Job Search Results

826 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/06/16 Sunday 09:55AM Pacific Time by ContractJobHunter. )

Listings 1 - 826

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/22/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2555 - MANUFACTURING ENGINEER - cv word doc only - On Hold

Description:
Establish and maintain manufacturing technical sequences (Precedence).

Analyze cycle times .

Establish critical cycle time.

Define and Produce the optimal line balancing for specific rate.

Establish the detailed manpower requirement (workcenters, crew type, shift,..).

Determine Production capacity (Manpower, equipment).

Produce daily production schedule (Chart).

Collect, document and maintain manufacturing data. (loads, capacity, equipment, footprint ...).

Participate in analyzing and establishing the production standard time.

Establish detailed value stream mapping.

Establish and organize workcenter considering human and material flow. .

Manage production changes (sequence).

Identify and participate in Improvement projects.

Bachelor Degree or relevant experience in Industrial Engineering.Administration, Operations Management.

Must have organization skills, rigor and autonomy.

Have strong logical and mechanical aptitude.

Are a teamworker.

Demonstrate leadership and love challenges.

Have a great sense of initiative.

Are flexible in terms of working hours.

Have a very good knowledge of Excel and MS Project software.

Patience, perseverance and curiosity.

Experience in aerospace or cabinet manufacturing industry is an asset.
 
Job Number: 2555
Job Location: Montreal, Canada
Rate: 48.00
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 06/04/2019
Last Updated: 06/14/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

5 Manufacturing Engineer II Needed

Description:
Unique Skills:
SAP, SMARTEAM, CATIA, SOLUMINA PREFERRED

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibillity studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.




The Structures Company is an AA/EOE.
 
Job Number: 311
Job Location: GA
Rate: $52.50/Hr.
Per Diem: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 05/14/2019
Last Updated: 06/14/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: debbieaubert@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
55315 NC Programmer

Description:
NC Programmer

Location: Reading, PA

6 month contract - ASAP start date 



Capable of programming metallic and composite parts (Including honeycomb core), verifying programs, Catia V5, also programming for tools and fixtures, (Includes molds for composite part fab, trim tools, assy fixtures etc.

Configure tools and ensure efficient production.

Analyze blueprints in order to calculate correct part dimension for tool selection, machine speeds, and feed rates.

Make mechanical and/or program adjustments to ensure parts are meeting quantity and quality requirements.

Assist with and/or constructs fixtures, jigs, tools, soft vise jaws, shop aids

Use precision measuring instruments including micrometers and calipers, and fixtures and gauges to check work.

Read Instrumentation and gauges to accurately measure dimensions on parts that are being machined.

Experience setting up and troubleshooting CNC machines.

Able to demonstrate good manufacturing practices and be able to select tooling and machining resources for manufacture of parts.

Analyzes product definition drawings or computer models for appropriate method of accomplishing the requested N/C operation.

Develops a machining and/or inspection process methodology or reviews requested methodology for operational feasibility and completeness.

Must have a proficient understanding of G-code and M-code programming.

Develops tool, probe, or measuring machine paths utilizing tool axis control for multi-axis operations including validity of selected cutting tools and/or probes to perform the requested operation.

Performs verification of part programs to ensure resultant data will produce or inspect product to quality requirements including utilization of computerized tools.

Performs Software Quality Assurance (SQA) steps including the creation of a documentation folder for each N/C program and participates in the validation of N/C programs in manufacturing areas.

Performs project administration and related leadership duties, which include project status reporting, preparing project documentation, user/vendor liaison, planning and scheduling.

Defines, develops, and improves machining processes and identifies and resolves N/C manufacturing problems.



Required Skills:

Catia V5, Vericut

Min years of experience:

8 to 10 years, Degree Requirements: Associate degree or higher, willing to look at individuals where experience compensates for degree.













____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55315
Job Location: Reading, PA
Per Diem: possible
Duration: 6 months +
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic URGENT URGENT / no clearance / 3 years’ experience of C-130 Flight Line experience required SC

Description:
164387
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Max Pay Rate: 25-29/hr DOE
Start Date: ASAP
End Date: 9 months
Position Type: Contract
1 more opening

Job Summary:
Inspects, troubleshoots, repairs, overhauls and modifies aircraft systems and powerplants in accordance with established written procedures, specifications, and standards. Candidate must be knowledgeable in aircraft systems operation and maintenance to include landing gear, powerplants, flight controls, disassembly, reassembly, rigging and aircraft movement.

Must be able to read and speak English. Comprehend documents such as safety rules, operating maintenance instructions and procedure manuals.

Mission essential functions and other duties may be assigned as required.

Qualifications and Education Requirements
• Candidate must possess at minimum, 3 years of C-130 Flight Line Experience
• Candidate will provide shadowed toolbox with etched tools per minimum inventory and specifications as detailed by the company

In order to perform the essential functions of this job, the employee is regularly required to perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft. The employee is occasionally required to sit, climb, and balance. The employee must frequently lift and/or push or pull up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus. While performing the essential functions of this job, the employee will be required to wear Personal Protective Equipment (PPE) as needed to perform job tasks. The employee is regularly exposed to vibration. The candidate will be frequently exposed to moving mechanical parts, fumes or airborne particles. The candidate must be able to properly use, handle and dispose of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures. The employee is occasionally exposed to wet and/or humid conditions, high, precarious places, and outside weather conditions. The candidate is required to work in a safe and efficient manner while maintaining a clean, FOD-free work area.

Preferred Skills
FAA Airframe and/or Powerplant License a Plus!
 
Job Number: LM-002
Job Location: Greenville, SC
Rate: 25-29/hr DOE
Per Diem: no
Duration: 9 months
Input Date: 04/29/2019
Last Updated: 05/16/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Aerodynamics CFD Engineer

Description:
Chipton-Ross is seeking an Aerodynamics CFD Engineer for an opening in Reno, NV.

RESPONSIBILITIES:
The Aerodynamics CFD Engineer will contribute to the aerodynamic analysis and design of the Client supersonic business jet to meet program and certification requirements. The successful candidate will have a fundamental understanding of aerodynamics and CFD, preferably with experience on supersonic applications.
Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities.
Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools.
Provide guidance in design modifications to the airframe or airframe elements to improve aerodynamic performance.
Generate aerodynamic performance, stability and control and loads database.
Assist in the development of advanced aerodynamic analysis tools.
Provide support for engineering, certification, and flight test departments from concept to product certification.

REQUIRED EXPERIENCE:
1-5 years experience in computational fluid dynamics of external and/or internal flows, including validation of results.
Experience in the development of fighter, supersonic, and/or business aircraft.
Familiarity with HPC platforms and NASA CFD codes such as Overflow and Fun3D.
Strong technical, interpersonal, communication, administrative, and presentation skills.
History of working in a collaborative multi-discipline team environment.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, with an advanced degree in a technical specialty involving computational fluid dynamics highly preferred.

WORK HOURS:
Full-Time
 
Job Number: 177350
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 02/21/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Aerodynamics Design Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Design Engineer for an opening in Reno, NV.

RESPONSIBILITIES:
The Aerodynamics Design Engineer will be responsible for the aerodynamic design of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration (preferably supersonic), and stability and control.
Perform detailed aerodynamic design and analysis in areas of aircraft shape, configuration, performance, and handling qualities.
Optimize and tune aircraft shape using CFD and other commercial or in-house advanced modeling tools including geometry modeling.
Predict aircraft aerodynamic performance using classical analytical techniques as well as advanced simulation tools.
Provide guidance in the design of airframe and control surface. components which meet design and certification requirements
Provide support to the various Systems and Structures IPTs in support of their development and certification.
Assist in the development of advanced aerodynamic analysis tools.
Provide subject-matter expert level guidance on both practical and theoretical aerodynamic aircraft design.
Provide support for engineering, certification, and flight test departments from concept to product certification.

REQUIRED EXPERIENCE:
Minimum of five years overall technical experience in aerodynamics, CFD and aerodynamic design of air vehicles.
Familiarity with computational geometry and 3D geometry modeling.
Significant experience in aerodynamic design, from concept through certification, in a collaborative multi-discipline team environment.
Experience in the development of fighter, supersonic, and/or business aircraft. Experience with advance design tools such as MDO frameworks.
Familiarity with HPC platforms and NASA CFD codes.
Advanced skills in computational geometry and familiarity with Dassault Systmes CATIA software suite.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Demonstrated leadership in solving technical challenges.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, or similarly related field, with an advanced degree in a highly relevant technical specialty strongly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177351
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 03/01/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerodynamics Engineer

Description:
• Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities
• Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools
• Provide guidance in design modifications to the airframe or airframe elements to improve aerodynamic performance
• Generate aerodynamic performance, stability and control and loads databases
• Assist in the development of advanced aerodynamic analysis tools
• Provide support for engineering, certification, and flight test departments from concept to product certification

Basic Qualifications:
• Zero to five years overall technical experience in computational fluid dynamics of external and/or internal flows.
• BS degree or higher in mechanical/aerospace engineering.
Strong technical, interpersonal, communication, administrative, and presentation skills.

Desired qualifications:
• MS or PhD degree in a technical specialty involving computational fluid dynamics.
• Significant experience with CFD including validation of results. History of working in a collaborative multi-discipline team environment. Experience in the development of fighter, supersonic, and/or business aircraft. Familiarity with HPC platforms and NASA CFD codes such as Overflow and Fun3D.
 
Job Number: 42-015
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 05/31/2019
Last Updated: 05/31/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Aerodynamics Propulsion Integration Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Propulsion Integration Engineer for an opening in Reno, NV.

RESPONSIBILITIES:
The Aerodynamics Propulsion Integration Engineer will be responsible for supporting the aerodynamic design of the inlet and exhaust systems of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of propulsion integration, preferably with experience developing supersonic inlets. Candidates should have expert level knowledge of the necessary physics-based trades for supersonic designs. The successful candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, and, ideally, wind tunnel testing from low speed to high speed regimes.
Perform detailed aerodynamic design and analysis in areas of aircraft inlet shape, performance, and integration.
Design and optimize inlet aerodynamic loft using CFD and other advanced design, optimization and modeling tools.
Perform detailed aerodynamic design and analysis in areas of aircraft nozzle shape, performance, and integration.
Design and optimize inlets and nozzles as integrated elements of the aircraft using CFD and other advanced design, optimization and modeling tools.
Provide support to the various Systems and Structures IPTs in support of their development and certification.
Assist in the development of advanced aerodynamic analysis tools by providing feedback and developing requirements.
Provide support for engineering development tests, certification, and flight testing from concept to product certification.
Interact with engine supplier to help manage and meet inlet requirements and nozzle performance.

REQUIRED EXPERIENCE:
Minimum of five years of technical experience in one of the specific flight sciences areas of aircraft design, with specific and/or strong general knowledge of the other areas.
Experience in air vehicle aerodynamic design in a collaborative multi-discipline team environment.
Familiarity with HPC platforms and CFD codes
Experience with advance design tools such as MDO frameworks, as well as programming (Java, C, Fortran) and scripting (Python, Bash).
Strong technical, interpersonal, communication, administrative, and presentation skills.
Demonstrated leadership in solving technical challenges.
Experience in the development supersonic and/or business aircraft strongly desired.
Experience in aerodynamic design of inlets and/or nozzles, especially for supersonic aircraft. Experience with Overflow, Fun3D, Pointwise and Tecplot CFD tools.
Experience with CATIA.

EDUCATION:
Accredited Bachelor's degree in Mechanical or Aerospace engineering, or similarly related field, with a relevant advanced degree strongly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177352
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 02/21/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Aerodynamics Test Engineer

Description:
Chipton-Ross is seeking an Aerodynamics Test Engineer for an opening in Reno, NV.

The Aerodynamics Test Engineer will be responsible for supporting the aerodynamic design of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics-based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration test (preferably supersonic), aerodynamics loads and stability and control.

RESPONSIBILITIES:
Perform wind tunnel test planning/execution/reporting.
Wind Tunnel coordination, Wind Tunnel Model manufacturing oversight, incorporation of required algorithms into Wind Tunnel facility, Wind Tunnel Test Execution, and subsequent analysis of Wind Tunnel data supporting test activities.
Support the development of instrumentation requirements and data analysis to successfully meet the wind tunnel test objectives.
Provide guidance during test campaigns to improve and assess aerodynamic performance.
Perform detailed aerodynamic analysis in areas of aircraft aerodynamic forces, performance, external loads, and handling qualities.
Provide support for engineering, certification, and flight test departments from concept to product certification

REQUIRED EXPERIENCE:
1-5 years experience with aircraft design or performance analysis using computational tools such as vortex-lattice and area rule methods as well as traditional handbook methods. .
Experience in the development of fighter, supersonic, and/or business aircraft.
Familiarity with testing of propulsion systems for supersonic aircraft.
History of working in a collaborative multi-discipline team environment.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, with an advanced degree in a technical specialty relating to aircraft design and performance highly preferred.

WORK HOURS:
Full-Time
 
Job Number: 177353
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 02/22/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

Product Review Engineer

Description:
Chipton-Ross is seeking a Product Review Engineer for an opportunity in Greenville, SC.

RESPONSIBILITIES:
Assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.
Support Planning reviews for F-16 Production through all phases of the F-16 Production.
Engineering candidate will be required to coordinate across many Greenville Operations Functional areas and LM Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action. Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.
Candidate must value and support diversity.

REQUIRED EXPERIENCE:
Minimum of 6 years' experience with aircraft design, assembly, production or repair is required.

EDUCATION:
Accredited Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

WORK HOURS:
Full-Time/First Shift



 
Job Number: 179321
Job Location: Greenville, SC
Rate: $DOE
Duration: 3-6 MONTHS
Input Date: 05/13/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Aeronautical Engineer

Description:
Aeronautical Engineer
Location: Lexington, KY
12+ month contract

ACTIVE SECRET CLEARANCE REQUIRED.

1-5 years of experience - entry level candidates will be considered

Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.


Our client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components into various
platforms based on customer specifications.

As an entry level Aeronautical Engineer you will work as part of an engineering team. Your job will be to analyze and write substantiation documentation based on customer
requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn. The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).
MATHCAD and MATLAB are also used for 'hand' calculations. You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Basic Qualifications :
Bachelors or Masters in Science degree in Mechanical or Aerospace Engineering, or Engineering Mechanics from an accredited University.
2 years of experience 

Desired skills :
Experience with a FEM creation using ANSYS, NASTRAN or similar program. Experience with Microsoft office suite (Word, Excel and PowerPoint).
Demonstrated previous success working in a team based environment to meet objectives.
MRB experience with Hangar support







____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56743
Job Location: Lexington, KY
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: 04/29/2019
Input Date: 06/11/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Email: lleszek@butler.com
Website: www.butler.com

Aeronautical Engineer

Description:
Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Our client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program.
- This program is critical to the success of US service men and women deployed throughout the world.
- Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests.
- The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications.
- Your job will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn.
- The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).
- MATHCAD and MATLAB are also used for 'hand' calculations.
- You will work with mechanical design teams to develop working models for integration of these components.
- Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Education :
- Level 2: BS+3-5 YRS or MS+0-3 YRS

Desired skills :
- Experience with a FEM creation using ANSYS, NASTRAN or similar program.
- Experience with Microsoft office suite (Word, Excel and PowerPoint).
- Demonstrated previous success working in a team based environment to meet objectives.
- MRB experience with Hangar support
 
Job Number: 10810
Job Location: Lexington, KY
Rate: $50.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 04/18/2019
Last Updated: 06/07/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Aeronautical Engineer / ANSYS FEMAP Finite Element Modeling (FEM) MATHCAD MATLAB - Clearance KY

Description:
1499-1 Aeronautical Engineer
Work Location: Lexington, KY
Status: Open

Qty: 2
Desired Start Date: 4/15/2019
End Date: 4/15/2020

Job Description:
Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Client is seeking an Aeronautical Engineer to support our Special Operations Forces Support Activity (SOFSA) Program. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world. The team is focused mainly on modifying existing aircraft and integrating modified components into various platforms based on customer specifications. As an entry level Aeronautical Engineer you will work as part of an engineering team. Your job will be to analyze and write substantiation documentation based on customer requirements using applicable military specifications, internal structural manuals and text similar to Analysis and Design of Flight Vehicle Structures, Bruhn. The primary tool used for Analysis is ANSYS and FEMAP for Finite Element Modeling (FEM).

MATHCAD and MATLAB are also used for 'hand' calculations. You will work with mechanical design teams to develop working models for integration of these components. Upon design completion, you will be expected to support the installation/integration of your analysis by providing support to the mechanic workforce as required.

Basic Qualifications:
Bachelors or Masters in Science degree in Mechanical or Aerospace Engineering, or Engineering Mechanics from an accredited University.

Desired skills:
Experience with a FEM creation using ANSYS, NASTRAN or similar program. Experience with Microsoft office suite (Word, Excel and PowerPoint). Demonstrated previous success working in a team based environment to meet objectives. MRB experience with Hangar support

Typical Minimums:
Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

Level: Level 2: BS+3-5 YRS or MS+0-3 YRS
Pay Rate: $23.00 - $65.00 Hourly
 
Job Number: JE-1499-1S
Job Location: Lexington, KY
Rate: 65/hr max
Duration: 12 months
Input Date: 06/12/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeronautical Engineer / landing gear engineer / 3D Catia GD&T / mechanisms / Stress Analysis - Clearance CA

Description:
1468-1 Aeronautical Engineer

Work Location: Palmdale, CA
Status: Open
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a landing gear engineer. A successful candidate will have a complete understanding of the principles and techniques for most of the following: landing gear, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.

3-D CATIA experience is required.
Mechanisms Engineering experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1468-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeronautical Engineer / landing gear engineer / 3D Catia GD&T / mechanisms / Stress Analysis - Clearance CA

Description:
1470-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a landing gear engineer. A successful candidate will apply extensive technical expertise with landing gear system principles and techniques including most of the following: shock strut, door mechanisms, gear retraction, hydraulic or electro-mechanical actuators, bearing selection, steering, brakes, tires and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at Lockheed Martin and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.
Landing Gear Engineering experience is required.

Level: Level 4: BS+16 YRS or MS+14 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1470-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/02/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeronautical Engineer / mechanism design engineer / 3D Catia GD&T / Development, test, and validation of mechanical designs / Stress Analysis - Clearance CA

Description:
1464-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Request: Engineering - Aeronautical Engineer
Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a mechanism design engineer. A successful candidate will have a complete understanding of the mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction systems, flight control systems, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at client site and external supplier facilities.

3-D CATIA experience is required.
Mechanism Design experience is required.
Geometric Dimensioning and Tolerancing (GD&T) experience is required.

Level: Level 3: BS+9-15 YRS or MS+7-13 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1464-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/18/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeronautical Engineer / mechanism design engineer / 3D Catia GD&T / Development, test, and validation of mechanical designs / Stress Analysis - Clearance CA

Description:
1467-1 Aeronautical Engineer
Work Location: Palmdale, CA
Status: Open

Qty: 2
Desired Start Date: 4/12/2019
End Date: 4/11/2020

Job Description:
This position is for a mechanism design engineer. A successful candidate will apply extensive technical expertise with mechanical system principles and techniques including most of the following: door mechanisms, landing gear retraction, flight control, hydraulic or electro-mechanical actuators, bearing selection, and preliminary structural analysis. The candidate will coordinate efforts across a wide range of functional organizations including Airframe Design, Quality Assurance, Planning, Tooling, Structural Analysis, Materials & Processes, Flight Sciences, Test and Manufacturing.

Responsibilities for this position include:

• Development, test, and validation of mechanical designs.
• Coordination with suppliers, internal and external integrated product teams, management and the customer.
• Creation and/or modification of primary and secondary structure with 3-D CATIA models, assemblies and installations.
• Creation and/or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.
• Technical engineering support for manufacturing, installation and testing at site and external supplier facilities.
• May function in a project leadership role where they manage system performance, budget and schedule.

3-D CATIA experience is required.
Mechanism Design experience is required.
Geometric Dimensioning and Tolerancing (GD&T) is required.

Level: Level 4: BS+16 YRS or MS+14 YRS

Areas of Expertise CATIA Yes 1 6 + Years
Areas of Expertise Mechanisms Yes 1 6 + Years
Areas of Expertise Design No 3 6 + Years
Technical Skills Geometric Dimensioning and Tolerancing (GD&T) Yes 2 6 + Years
Technical Skills Stress Analysis No 3 6 + Years
 
Job Number: JE-1467-1S5
Job Location: Palmdale, CA
Rate: open rate
Per Diem: no
Duration: 12 months
Input Date: 04/11/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aeronautical Engineer / no clearance / 6 years’ experience with aircraft design, assembly, production or repair is required URGENT SC

Description:
164971
Job Title: Aeronautical Engineer
Need Date: ASAP
Number of Openings 1
Length of Assignment 3-6 months (Possibly More)
Hourly Pay Rate $48.00
Possible Temp to Hire? Yes
Shift, Start & End Time 1st 6:30-4:00 (Possible OT)
Specific Work Location Greenville, SC


Job Description:
Aeronautical Engineer required to assist with the Material Review Board (MRB) to support detail fabrication, sub-assembly, component assembly, and mate through delivery operations.

Primary duties of this assignment include technical solution development and coordination, and preparation and release of dispositions related to discrepancies on high performance aircraft detail parts, assemblies, installations and finishes.

Support Planning reviews for F-16 Production through all phases of the F-16 Production.

Engineering candidate will be required to coordinate across many Greenville Operations Functional areas and Aero sites, including Stress/DADT, Quality Assurance, Planning, Functional Test, Structures and Systems Design groups, Safety, Materials and Processes and Flight Sciences. Chosen candidate will work closely with the production floor, support process improvements, incorporate best practices into daily operations, and coordinate lessons learned and corrective action. Must possess experience with making timely decisions and possess the ability to understand and manage financial impacts created by specific decisions.

Candidate must value and support diversity.

Minimum Requirements:
Bachelor of Science Degree in Mechanical or Aeronautical Engineering field is required.

Minimum of 6 years’ experience with aircraft design, assembly, production or repair is required.
 
Job Number: LM-002
Job Location: Greenville, SC
Rate: 48/hr max
Duration: 6 months CTH
Input Date: 05/31/2019
Last Updated: 06/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

Aerospace Stress Analyst Secret Cleared

Description:
*This is a 1 year or more contract position located in Lexington, KY*
*Must have an Active Secret Clearance in order to start position*



We are seeking a contract stress analyst or structures engineer who will be working on flight vehicles and/or missiles applying knowledge to dynamics and stress of flight of different materials upon vehicles. Models will be put into simulations, and need top pass physical as well as environmental conditions analysis, using linear/non-linear methods.



Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:
*Current Active Secret Clearance
*2 years’ experience in stress/structural analysis of aircraft using ANSYS/FEMAP for FEM

*Nastran experience
*Knowledge of hand analysis using MATHCAD/MATLAB

*MRB experience with Hangar support
*4 year Mechanical Engineering degree
 
Job Number: 549
Job Location: Lexington, KY
Input Date: 06/11/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Email: tom@cssstaffing.com
Website: www.cssstaffing.com

Aircraft Assembly Technician

Description:
PDS Tech, Inc. is seeking an Aircraft Assembly Technician in Mesa, AZ.

Summary:
  • Assemble, disassemble, install, test and troubleshoot mechanical and electrical assemblies and subassemblies on aircraft systems.
  • Follow computer based and other specific processes and systems, including manufacturing planning, wiring diagrams, system schematics, process specifications, engineering sketches, and other forms of written and oral instructions.
  • Follow specific tool control, FOD control and safety guidelines and policies.
  • Prefer At least 2 - 3 years recent experience with mechanical, electrical/avionics, sheet metal or composites on aircraft systems.
  • Need experience and proficiency in any or all of the following: Flight Control systems (build, install and rig), Fuel system installations, avionics, hydraulics, drive systems, brake systems, aircraft wire installation, Engine (build and install), Canopies and Doors.
  • Rotorcraft experience preferred.
  • A & P License preferred.
  • Must be capable of working 1st or 2nd shift.
  • Work week based on a 9/80 schedule with every other Friday off.


Prerequisites:
  • High School Diploma or GED required. 


 
Job Number: 1910101266
Job Location: Mesa, AZ
Duration: 12 months
Input Date: 04/15/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mindy Moore
Address: 1839 S ALMA SCHOOL RD STE 250
City, State: MESA, AZ 85210
Phone: 480/929-9922
800 Phone: 800/657-0997
Fax Phone: 480/929-9779
Email: cecjphoenix@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eDDQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Manufacturing Engineer

Description:
*This is a full time, 15 month, contract position based in Fort Worth, TX*



We are hiring for a manufacturing engineer who will be doing part verification for our military aircraft fuselages. The activities candidate will be involved in will include planning/improving process layouts/instructions, machining, sequence of operations, and tooling fabrication that the mechanics can follow.



Will work closely with the manufacturing floor personnel, to ensure efficiency and to solve simple to complex manufacturing problems as well as coming up with the production plan. Will work on capacity planning, production floor layouts, help with capital equipment requirements forecasting, develop ROI analysis, continuous

improvement edicts, root cause analysis, value steam mapping, performance metrics, etc.



Required:
*2 years’ experience as an aerospace process or manufacturing engineer.
*Experience with engineering drawings, work instructions, understanding of tolerances.
*Experience in Productivity for manufacturing; configuration control principles
*4 year engineering or equivalent degree (ME or IE preferred)


Pluses:
*Military aircraft experience, such as the F35.
*LEAN Principles knowledge (training in Green/Black Belt is OK), tools and thinking experience

*Experience with work flows, process development of assemblies, tooling or mechanical integrations
*AS9100 assembly/quality system back ground and track record of process improvement.
*DoD experience/standards testing
 
Job Number: 196
Job Location: Fort Worth, TX
Input Date: 05/09/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Manufacturing Engineer- Secret Cleared

Description:
*This is a full time, 15 month, contract position based in Fort Worth, TX*



We are hiring for a manufacturing engineer who will be doing part verifications for our military aircraft fuselages. The activities candidate will be involved in will include planning/improving process layouts/instructions, machining, sequence of operations, and tooling fabrication that the mechanics can follow.



Will work closely with the manufacturing floor personnel, to ensure efficiency and to solve simple to complex manufacturing problems as well as coming up with the production plan. Will work on capacity planning, production floor layouts, help with capital equipment requirements forecasting, develop ROI analysis, continuous

improvement edicts, root cause analysis, value steam mapping, performance metrics, etc.



Required:
*2 years’ experience as an aerospace process or manufacturing engineer.
*Experience with engineering drawings, work instructions, understanding of tolerances.
*Experience in Producibility for manufacturing; configuration control principles
*4 year engineering or equivalent degree (ME or IE preferred)


Pluses:
*Military aircraft experience, such as the F35.
*LEAN Principles knowledge (training in Green/Black Belt is OK), tools and thinking experience

*Experience with work flows, process development of assemblies, tooling or mechanical integrations
*AS9100 assembly/quality system back ground and track record of process improvement.
*DoD experience/standards testing
 
Job Number: 196
Job Location: Fort Worth, TX
Input Date: 05/08/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Aircraft Mechanics

Description:
Role Description
  1.  Service, repair, troubleshoot and modify aircraft and aircraft engines.
  2. Repair, replace and rebuild aircraft structures, system and functional components.
  3. Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
  4. Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
  5. Research and understand FAA technical data relevant to assigned tasks.
  6. Maintain the premises in a clean and organized manner.
  7. Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.

Knowledge/Skills/Abilities:
 
  • Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.


  • Good leadership (individual contributor) presence:

    • Able to lead by example and live/work by company values. 
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members. 
    • Able to be patient and objective in difficult situations with different types of people.



  • Good customer service tool box:

    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to address and solve important issues.

  • Good organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines. 
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Good communication skills (oral, written) with customers.  
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

  • Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization. 
  • Good project management skills, including the ability to take ownership for accomplishing assigned tasks.  Results-oriented planner who ensures that goals are met.  Able to set priorities and keep to projected schedules.
  • Computer Skills:  Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

 
Education
 
  • Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school   
  • A&P Certificate
  • Japanese Bilingual preferred

 
Experience
 
  • Three (3) plus years of aircraft mechanical experience preferred

 
Job Number: 1810089104
Job Location: Moses Lake, WA
Duration: 6 months
Input Date: 02/06/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mf2gAAA&URLSource=cjhunter

Aircraft Performance Engineer

Description:
Chipton-Ross is seeking an Aircraft Performance Engineer for an opening in Reno, NV.

The Performance Engineer will be responsible for mission performance analysis of the Client supersonic business jet to meet program and certification requirements. Successful candidates will have a commanding and fundamental understanding of the design and development of fighter and/or business jet class aircraft, preferably with experience developing supersonic vehicles. Candidates should have expert level knowledge of the necessary physics-based trades for supersonic designs and the regulatory requirements that apply to such aircraft. The ideal candidate will have demonstrated knowledge and experience in computational fluid dynamics, analytical and theoretical performance estimation techniques, wind tunnel testing from low speed to high speed regimes (preferably supersonic), propulsion integration (preferably supersonic), and stability and control.

RESPONSIBILITIES:
Perform detailed takeoff, landing and mission performance calculations for the AS2.
Evaluate various flight maneuvers for assisting development of loads, aircraft handling qualities or other development or certification requirement.
Predict aircraft performance and handling characteristics using classical analytical techniques as well as advanced simulation tools.
Assist development and enhancement of in-house performance prediction codes.
Work with aerodynamics group to collect CFD and wind tunnel data.
Collaborate with the stability and control and aircraft external loads groups.
Operate 6-DOF simulation codes.
Post-process and analyze wind tunnel and flight test data.
Assist with development of performance estimates for flight testing and certification data for the aircraft flight manual.
Assist in the development of advanced tools for performing MDO trades, aircraft sizing and performance analysis.
Provide support for engineering, certification, and flight test departments from concept to product certification.

REQUIRED EXPERIENCE:
1-5 years experience with aircraft design or performance analysis using computational tools such as vortex-lattice and area rule methods as well as traditional handbook methods. .
Experience programming in Java, Python, Matlab/Simulink and wiht writing numerical aircraft analysis codes for sizing and/or performance.
Knowledge of aircraft handling qualities and stability and control, as well as aerodynamic CFD methods and wind tunnel testing.
Familiarity with numerical optimization techniques and multi-disciplinary optimization frameworks.
Understanding of statistical methods used in quantifying uncertainties.
Experience with supersonic and/or business aircraft.
Strong technical, interpersonal, communication, administrative, and presentation skills.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

EDUCATION:
Accredited Bachelor's degree Mechanical or Aerospace engineering, with an advanced degree in a technical specialty relating to aircraft design highly preferred.

WORK HOURS:
Full-Time

 
Job Number: 177355
Job Location: Reno, NV
Rate: $DOE
Duration: Direct
Input Date: 03/05/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Patrick Costello
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: pcostello@chiptonross.com
Website: www.chiptonross.com

Aircraft Technician Sr

Description:
PDS is seeking an Acft Tech Sr  for an open position in Savannah, GA.

Independently perform a variety of aircraft modifications and maintenance functions such as removal and installations of airframes, landing gear, engine components, electrical components, and control systems to assure conformance to procedures, performances and test specifications. 

Principal Duties and Responsibilities:

Essential Functions:
1. Perform required periodic maintenance and necessary servicing of all aircraft mechanical systems. Must demonstrate the ability to consistently perform assigned maintenance task within the quoted or standard CMP time.
2. Provide work direction for assigned technicians. Promote high standards of quality through instruction and by example setting.
3. Act on behalf of Mechanical Team Lead (MTL) in his/her absence and assume the duties and responsibilities of the MTL when assigned.
4. Coordinate with the Inspection department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner. Ensure that all work accomplished meets quality standards and specifications.
5. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely.
6. Follow standard operating procedures and JSAs when operating ground support equipment, such as power supply, hydraulic rigs, nitrogen filler carts, and oxygen service carts. Operate and supervise use of special support equipment used in removal and installations of major components.
7. Coordinate movement of aircraft as required.
8. Assist in training new employees concerning computerized maintenance program (CMP) maintenance manuals, SRMs illustrated parts catalog (IPC) usage, flight test installations, and all maintenance of major components.
9. Coordinate with other departments to arrange for the overhaul or repair of customer property as needed. 

Additional Functions:
1. Use the material tracking system to create parts demand and to charge labor to correct work orders and item numbers.
2. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags.
3. Implement and apply Lean/continuous improvement processes to all areas of responsibility.
4. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use.
5. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
6. Perform other duties as assigned.
 

Education and Experience Requirements: 
High school diploma/GED. FAA Airframe and Powerplant Mechanic Certificate required.
Valid Drivers License required.
Four years of aviation maintenance experience to include 3 years of experience working on mid/large-size aircraft required.
Corporate aircraft experience preferred.
 
Other Requirements:
1. Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems within each aircraft product line.
2. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.)
3. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures.



 



.


 
Job Number: 1910101920
Job Location: Savannah, GA
Duration: 6 months
Input Date: 05/09/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Donnell Covington
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gJqQAI&URLSource=cjhunter

Aircraft Technician, Service Center

Description:
General Summary:
The Technical Support Representative technical assistance and guidance to Honda Jet customers, service facilities for Avionics, Systems Mechanical Systems and Structural related issues.
 
Duties and Responsibilities:

  • Serves as technical support subject matter expert in the following aircraft systems
    • Avionic Systems
    • Mechanical Systems
    • Structures Technical Support Representatives

  • Works directly with HondaJet customers and service facilities regarding technical assistance
  • Maintains the customer database for accurate tracking of all field issues identified and resolved
  • Coordinates with Technical Support Engineering on fleet system reliability issues
  • Maintains the reporting database to ensure all requirements are met in accordance with Title 14 CFR Part 21.3
  • Assists parts analyst and warranty administrators as required
  • Coordinates instructions for continued airworthiness updates based on customer feedback
  • Provides training in all aspects of Honda jet
  • Travel as required 

Qualifications


 

Education, Work Experience, Certification and/or Licensure:



  • Two year degree in Aviation related field from an accredited college or university strongly preferred


  • 10+ years experience in the aviation/aerospace industry

 
Job Number: 1910097528
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/22/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Thomas Levitt
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r92YQAQ&URLSource=cjhunter

Assembly & Test Technician - Navigation Systems

Description:
PDS Tech, Inc. is seeking an Electro-Mechanical Assembly & Test Technician in Clearwater, FL.
• Performs standard testing processes on a variety of equipment and records and analyzes results. 
• This role will be assembling navigation systems. 

  • Candidates require high level of manual dexterity
  • Candidates should have minimum 2 years electro-mechanical assembly experience. 
  • Must be able to work with small intricate or delicate parts – some parts contain beryllium. Perform all other related duties as assigned. 
  • Precision soldering under a microscope experience preferred. 
  • Experience in handling of optical fiber and fusion splicing of fiber preferred but not required. 


 

 
Job Number: 1810083537
Job Location: Clearwater, FL
Duration: 8 months
Input Date: 04/04/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYCAA2&URLSource=cjhunter

Assembly Mechanic

Description:
PDS Tech is seeking an Assembly Mechanic in Arlington, TX
  • Constructs, maintains, and tests mechanical equipment, machinery, and components.
  • Identifies parts for replacement and machines that need new parts and places orders as necessary.

Requires a high school diploma or its equivalent. 
May be required to complete an apprenticeship and/or formal training in area of specialty. May require 6-8 years of experience in the field or in a related area. 
 
Job Number: 1910100973
Job Location: Arlington, TX
Duration: 6 months
Input Date: 05/01/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Shannon White
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dTLQAY&URLSource=cjhunter

AutoCAD Drafter

Description:
Chipton-Ross is seeking an A&E Services - Drafter located in Columbia, MD

RESPONSIBILITIES:
Within A/ES the drafter works as an integral team member and prepares various civil, structural, architectural, plumbing, mechanical, and electrical engineering 2D drawings and 3D Building Information Models (BIM). Work requires use of most conventional drafting and BIM techniques, and working knowledge of the terms and procedures of the architectural and engineering design, construction, and facility management industries. New or recurring work is assigned via various means; which may include written or verbal orders, methodology, procedures, data sources, and precedents to be followed. Drafter/Designer applies a general knowledge of design, construction and facility management necessary for preparation of documentation that comprises presentation drawings, all stages of design drawings, construction contract drawings, shop drawings and sketches, record drawings (as-builts), and facility management drawing with data links. Drawings and BIM models are prepared utilizing Autodesk AutoCAD and Revit, respectively.

REQUIRED EXPERIENCE:
MEP and/or architectural experience a plus.

EDUCATION:
Accredited Bachelor's Degree in related field.

WORK HOURS:
Part-Time/First Shift




 
Job Number: 177087
Job Location: Columbia, MD
Rate: $DOE
Duration: 12 months
Input Date: 02/12/2019
Last Updated: 06/16/2019
Firm Name: CHIPTON ROSS
Attention: Kristie Hardage
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: knguyen@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Automated Test Engineer (ATE)/ TestStand (370)

Description:
*This is a full time, 9 month contract, located on site only in Orlando*



We are searching for an electronics Automated Test Engineer (ATE) who will be using C programming, TestStand and LabWindows/CVI, to develop, design, test, and especially troubleshoot, debug and integrate DoD/military/defense systems hardware.



Candidate will be responsible for developing all verification and validation documentation necessary to certify the equipment for production use.



Required:

*5 years' experience in RF Engineering, Automated Test Engineering (ATE), using automated & manual tools, including TestStand, LabWindows/CVI, or Labview

*In lieu of above software requirement, C+ development from test requirements [may be substituted] for electro-optical and electro-mechanical systems for acceptance testing by test operators.

*BSEE or equivalent degree

*Active Secret [or Interim] Clearance

*Per diem split is available for out of town contractors

Pluses:

*C programming experience

*Familiar with JTAG using Acculogic

*Labview experience
*Experience with network and spectrum analyzers
 
Job Number: 370
Job Location: Orlando, FL
Input Date: 05/07/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Aviation Assembly Tech

Description:

PDS TECH INC is seeking an Assembly Mechanic in Kinston, NC


  • Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed. May conduct quality inspections on processing line in accordance with quality specifications. May disassemble, modify, rework, reassemble, and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions.
  • Duties
  • The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
  • 1.      Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
  • 2.      Complete required data gathering transactions to facilitate assembly progression.
  • 3.      Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
  • 4.      Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
  • 5.      Move and/or obtain correct parts, materials, tools, assemblies, etc.
  • 6.      Use precision measuring instruments required to accomplish work assignments.
  • 7.      Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
  • 8.      Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
  • 9.      Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required, and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
  • 10.     Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
  • 11.     Document any discrepancies according to specification, process, and procedure.
  • 12.     Cross trains in inspection and becomes SIA qualified.
  • In addition, each employee may be asked, on occasion, to complete other duties and responsibilities as required by Spirit leadership. Training and certification will be provided for the additional work when required. 
  • Requirements:
  • Qualifying Skills
  • 1.      Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.
  • 2.      Employee must have the skill and knowledge to perform in all of the general functions of the Assembly Technician listed below:
  • Sealer
  • Assembler
  • Sub Assembly
  • Assembler/Installer Structures
  • Inspection to include the following:
  • ·       Maintain required personal certifications.
  • ·       Perform complete inspection, including first part review, of procured or fabricated parts and assemblies.
  • ·       Initiate and document any non-conforming condition for Material Review Board action.
  • ·       Perform process surveillance to assure compliance with requirements.
  • ·       Prepare and maintain quality records.
  • 3.      Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment to assemble components in accordance with engineering specifications, and/or the employee must have the skill and knowledge to perform in two or more of the specialties listed below:
  • Assembly/Installation Doors
  • Precision Bench Assembly
  • Pressure and vacuum testing
  • 4.      Provide high-level technical support and leadership relative to assembly and installation
  • 5.       Setup and operate conventional and/or Computerized Numerical Controlled (CNC) and fastening equipment of less than simultaneous 3-axis movement. Activities include, e.g. drivematic processes, etc., or the employee must have the skill and knowledge to perform in one or more of the specialties listed below:
  • Assembly/Installation of Structures
  • Sealer
  • Sub Assembly
  • Additionally, the employee must have the skill and knowledge to perform one or more of the specialty skills listed below:
  • Assembly/Installation Doors
  • Precision Bench Assembly
  • Pressure and va




 
Job Number: 1910101643
Job Location: Kinston, NC
Duration: 3 months
Input Date: 04/26/2019
Last Updated: 06/14/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fZTQAY&URLSource=cjhunter

Avionics Technician

Description:
Our client in Tucson is in need of 10 Avionics Technician
In your role, you will:
  • Adhere to General Work Requirements (Factory, Shop and / or Hanger positions)
  • Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner
  • Troubleshoot, repair, inspect, modify and service aircraft avionics, electrical and electronic equipment
  • Perform and document work performed per appropriate manuals and regulations as required
  • Operate ground support equipment
  • Assist with mechanical / electrical removals and installations
  • Assist with aircraft component repair
  • Perform other duties as assigned


***Great hourly rate plus Time and a Half on Overtime!***
 



    Qualifications
    As our ideal candidate:
    • You have an A Certification
    • You have avionics / electric A/C Technical School or other substantiated equivalent
    • You have the ability to read and understand electrical engineering drawings
    • You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
    • You have your own basic set of hand tools with the ability to demonstrate inventory and control of tools
    • You must obtain appropriate Ground Support Equipment Qualifications as required
    • You must be able to work unscheduled overtime including nonscheduled work days and holidays
    • You must be able to work in seasonal/inclement weather outside


    ***Great hourly rate plus Time and a Half on Overtime!***
     

     
    Job Number: 1810080242
    Job Location: Tucson, AZ
    Duration: 6 months
    Input Date: 04/12/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Donnell Covington
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023fOvAAI&URLSource=cjhunter

    Avionics and Electrical Systems- UM

    Description:
    PDS Tech Inc is seeking a  Avionic and Electrical Systems - UM in Wichita, KS

    JOB RESPONSIBILITIES:

    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on Textron Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.


     
     



     
    Job Responsibilities:
    • DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
    • Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
    • Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
    • Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
    • Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
    • Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizationsand tools.

     
    Education and Experience:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    • Avionics and Electrical System DER qualifications (FAR 23 or 25).
    • Experience with domestic and foreign business and/or general aviation aircraft certification process is required
    • Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.

     
     
    Job Number: 1910097710
    Job Location: Wichita, KS
    Duration: 6 months
    Input Date: 03/14/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TlQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Bleed Air Designer

    Description:
    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the BAS and VCS.
    2. Prepare 3D installation and detail models of the BAS and VCS.
    3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
    2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

    Knowledge, Skills and Abilities:
    1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
    2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
    3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
     
    Job Number: 28-037
    Job Location: Greensboro, NC
    Rate: Up to $75/hr, DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 Year plus
    Start Date: ASAP
    Input Date: 04/10/2019
    Last Updated: 05/31/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Bleed Air Systems Design Engineer

    Description:
    General Summary:
    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

    Duties and Responsibilities:
    1. Prepare 3D layout models of the BAS and VCS.
    2. Prepare 3D installation and detail models of the BAS and VCS.
    3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:
    1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

    Knowledge, Skills and Abilities:
    1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
    2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
    3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




    The Structures Company is an AA/EOE.
     
    Job Number: 301
    Job Location: NC
    Rate: OPEN - **DOE**
    Per Diem: Yes
    Overtime: Yes
    Duration: 10+ Months
    Start Date: ASAP
    Input Date: 04/29/2019
    Last Updated: 06/14/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    Buyer

    Description:
    Chipton-Ross is seeking a Buyer for an opening in Goleta, CA.

    RESPONSIBILITIES:
    - Issue request for quotes/proposals (RFQ/RFP) and select the best source that will provide cost, quality, and delivery requirements for electronic, mechanical, and electro-mechanical components.
    - Able to evaluate bid responses, negotiate price, delivery schedules, and place purchase orders in accordance with the division's policies, procedures, and government regulations.
    - Act as a liaison between suppliers and departments to resolve price, quality delivery, or invoice issues.
    - Work with suppliers on rejected material and claims resulting from purchase order changes or cancellations.
    - Monitor supplier performance and take corrective action as necessary
    - Work with planners to maintain materials and services are consistent with the production schedule.
    - Perform other procurement tasks and projects and needed

    REQUIRED EXPERIENCE:
    - Experience working with defense/aerospace or manufacturing environment
    - Strong working knowledge of procurement, planning and scheduling fundamentals.
    - Must have good working knowledge of MRP systems.

    EDUCATION:
    Accredited BA or BS in Materials Management, procurement, business administration, operations planning or related field preferred.

    WORK HOURS:
    9/80, 1st Shift
    Full-Time

     
    Job Number: 178478
    Job Location: Goleta, CA
    Rate: $27 to $33.00 DOE
    Duration: 5 Months
    Input Date: 04/04/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Rochelle Anderson
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: randerson@chiptonross.com
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    CAD Designer

    Description:
    Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.
    CAD Designer
    (US Citizenship Required*)
    Marion, VA
    2019-8780

    Responsibilities:
    • 3D design and modeling of mechanical hardware
    • Applying 3D dimensions and text to 3D models using the FT&A module
    • (3D-Model Based Definition)
    • Generating 3D-PDF files using Anark software
    • (training will be provided)

    Qualifications:
    • Succesful completion of a background check and drug screen is required.
    • Strong mechanical design background
    • Proficient in the Catia V5, Part Design module
    • Proficient in the Catia V5, Assembly Design module
    • Proficient in the Catia V5, Generative Shape Design module
    • Proficient in the Catia V5, Functional Tolerancing & Annotation module
    • Proficient in GD&T
    • ASME Y14.100 Engineering Drawing Practices
    • ASME Y14.5 Dimensioning and Tolerancing
    • ASME Y14.41 Digital Product Definition Data Practices
    • Preferred Skills and Abilities:
    o Windchill PDM System
    o Mechanical Engineering Degree
    o Experience in the manufacture of mechanical assemblies

    *US Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Associate's Degree or equivalent is required combined with a minimum of 7 years of relevant experience.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.


    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-8770
    Job Location: Marion, VA
    Duration: 6 Months
    Input Date: 05/10/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    CAD Designer

    Description:
    Chipton-Ross is seeking a Technical Design 2 located in Kennedy Space Center, FL.

    RESPONSIBILITIES:
    Uses 3D Computer Aided Design (CAD) and Manufacturing tools, to develop and maintain mechanical/structural engineering products, environments and trade studies. Prepares design layouts and modifies existing designs to satisfy customer requirements. Assists with the use of 3D laser scanning equipment used for creating as-built and models of large structures and platforms. Develops statements of work, including design requirements, cost and schedule estimates. Contributes to the integration of engineering models across client and NASA customers to provide a functional end-product. Ability to Lead a project and work under low supervision, ability to multitask and ability to work well within a team environment. Mentors less experienced personnel. Works under general direction.

    REQUIRED EXPERIENCE:
    CAD - Not Required - Intermediate
    CATIA V5 - Not Required - Intermediate
    CAD - Not Required - Intermediate

    EDUCATION:
    Accredited AA or BS degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    WORK HOURS:
    Full-Time/First Shift
    8::00 AM - 4:30 PM

    MISCELLANEOUS:
    This work assignment has been designated as "safety-sensitive" by the Client. Contractors assigned to safety-sensitive jobs at the Client site must first complete regulatory pre-placement requirements prior to reporting to assignment. Additionally, contractors assigned to safety-sensitive work will be subject to random drug and alcohol testing in accordance with federal mandates.

     
    Job Number: 177277
    Job Location: Kennedy Space Center, FL
    Rate: $DOE
    Duration: 9 Months
    Input Date: 02/20/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Richard Barrett
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rbarrett@chiptonross.com
    Website: www.chiptonross.com

    CAD Designer 3

    Description:
    Chipton-Ross is seeking 10 Technical Design 3's located in Oklahoma City, OK

    RESPONSIBILITIES:
    Uses manual or Computer Aided Design (CAD) CATIA V5/ENOVIA tools to develop and maintain mechanical/structural engineering product definition. Assists in preparation of basic design layouts. Modifies existing designs. Assists in the coordination50. and development work transfer packages for relevant parties. Verifies accuracy of non-technical data. Investigates and resolves routine manufacturing process or engineering related issues. Supports the maintenance of new processes and procedures by providing input related to routine aspects of the maintenance process. Works under general supervision.

    REQUIRED EXPERIENCE:
    Must Have Experience creating structural / mechanical designs using CATIA V5 & Enovia.

    Ability to work conceptual, preliminary and detailed design including 2D drawings and 3D deliverables

    EDUCATION:
    Accredited AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:30 PM
     
    Job Number: 177112
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 02/12/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Lucas Medina
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: lmedina@chiptonross.com
    Website: www.chiptonross.com

    CAD Designer/Drafter

    Description:
     Create detailed designs and fabrication drawings used in the manufacture of various equipment including bill of materials.  Additionally, will create piping flow schematics that are utilized in the construction of piping systems. These detailed technical drawings incorporate the input of engineers, sales and project managers and can specify dimensions, codes, materials, and production methods.    
    DUTIES AND RESPONSIBILITES:
    • Develop 3D models and finish drawings from sketches and data provided by Engineers
    • Must be able to visualize, conceptualize and formulate a design in 3D from similar existing designs
    • Ability to learn quickly and work on multiple projects
    • Exercise independent judgment by utilizing the correct design criteria based on knowledge from customer data and project scope
    • Create and assemble documentation packages and produce drawing sets and detailed bill of materials
    • Review customer drawings and other discipline drawings and any existing plan drawings for physical interference and design requirements
    • Provide technical support for project engineers and managers, client inquiries and fabrication requests
    • Effectively communicate with the project engineer, project manager and customer representatives to identify project design requirements
    • Ensure accuracy and completeness of drawings including dimensions, spelling, drafting standards and completeness
    • Must be able to visit job sites and take measurements for equipment design
    • Must have prior experience using Autodesk Inventor software

     

    • Education:  Associate or Bachelor degree in Engineering/CAD Design preferred
    • A minimum of two years CAD experience
    • A minimum of two years 3D modeling experience
    • Possess a strong mechanical aptitude
    • Knowledge of metal plate fabrication and welding preferred
    • Knowledge of integration of laser scan point cloud data into Inventor is a plus
    • Knowledge of iLogic programming a plus
    • Some travel required
    • The ability to work both independently and as part of a team are essential
    • Start date is immediate. 40 Hour work week (Monday- Friday) with some overtime as needed.   

     
     

     
    Job Number: 1910099818
    Job Location: Smyrna, TN
    Duration: 6 months
    Input Date: 03/13/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Amy Kloeppinger
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jXrqQAE&URLSource=cjhunter

    CNC Machinist

    Description:
    PDS Tech, Inc. is seeking a CNC Machine Operator in Panama City, FL. 

    JOB FUNCTION
    Under minimum Shop Supervision, accurately and efficiently sets-up and operates 5-axis CNC Milling Center (Zimmermann a plus) machine and Zoller tool setter machine to manufacture graphite, carbon fiber composite parts. Mentors and develops 2-3 site production technicians to successfully run and troubleshoot equipment.
     
     
    JOB RESPONSIBILITIES
    This document in no way states or implies that these are the only duties to be performed by the employee occupying the position.

    • Performs sets-up and operates a CNC Machine to provide Quality Graphite, carbon fiber Composite Parts.
    • Interprets and follows engineering planning.
    • Performs inspection of machined parts.

    Performs under minimum Shop Supervision, accurately and efficiently sets-up and operates 5-axis CNC Milling Center (Zimmermann a plus) machine and Zoller tool setter machine to manufacture graphite, carbon fiber composite parts. Mentors and develops 2-3 site production technicians to successfully run and troubleshoot equipment.
     
     
    JOB RESPONSIBILITIES


    • Performs sets-up and operates a CNC Machine to provide Quality Graphite, carbon fiber Composite Parts.
    • Interprets and follows engineering planning.
    • Performs inspection of machined parts.
    • Performs MDI’s on programs when necessary.
    • Interfaces and partners with Engineering, Programming and Quality Inspection as necessary.
    • Clearly interfaces and established effective communication with other shifts via logbook, work orders, verbal communication and shift interchanges.
    • Performs troubleshooting of quality errors to assist in the root cause & correction process.
    • Informs and escalates issues to the Team Leader accordingly and refrains from making modifications to the program without seeking proper approval.
    • Participates in 6S programs and maintains work area, tools, and equipment in a neat, clean, and orderly manner.
    • Will be accountable for developing 2-3 onsite technicians to run and maintain the CNC equipment and Zoller.  Milestones will be given to measure progress of development.
    • Operates forklift and crane in accordance with standard operating procedures.
    • Performs other related duties as required and assigned.
    • Actively participates in company safety initiatives.


    PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the Panama City, FL area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.
     
    EDUCATION
    Any combination of education and experience providing the required skill and knowledge for successful job performance will be considered.
    • CNC Machinist Certification preferred.
    • Forklift and Crane certification preferred.
    • Zimmermann experience preferred.

    EXPERIENCE & QUALIFICATIONS

    • Must be a US Citizen. Must comply with ITAR regulations and site SSA requirements.
    • 5 + years’ experience desirable operating full 5 Axis CNC machines.
    • Proficient with Siemens 840D.
    • Ability to read blue prints, maintain tolerances, and able to perform own set-ups.
    • Experience machining Composite materials.
    • Knowledge and understanding of machining techniques and processes.
    • Technical aptitude and excellent judgment skills.
    • Ability to use manual inspection equipment i.e. Micrometers, Calipers, Bore Gages etc.
    • Ability to MDI (Manual Data Input) hole patterns and radii.
    • Perform Trigonometry.
    • Thorough understanding of machining different materials and the ability to calculate spindle speed, machining federates.
    • Over 4,000 hours experience with Siemens 840D Controller.
    • Knowledge of advanced cutting tool technology.
    • Experience using Zoller tooling equipment.
    • Optimization of feeds and speeds.
    • Forklift and crane proficiency.

     
     CORE COMPETENCY


    • Read/communicate with coworkers and leads.
    • Knowledge of GD&T, shop math, and blueprint reading.
    • Proficient Forklift and crane operating skills.
    • Problem solving – the individual identifies and reports problems in a timely manner.
    • Interpersonal Skills – the individual remains open to ideas and exhibits willingness to try new things.
    • Oral communication – the individual speaks clearly.
    • Quality Control – the individual demonstrates accuracy and thoroughness and monitors own work to ensure quality.
    • Adaptability – the individual adapts to changes in the work environment, manages competing demands and is able to deal with frequent change, delays or unexpected events.
    • Dependability – the individual is consistently at work and on time, follows instructions, responds to management direction and solicits feedback to improve performance.
    • Safety and security – the individual actively promotes and personally observes safety and security procedures, and uses equipment and materials properly.

     
     Working Conditions:
    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.


    • Typically stands for extended periods at workstation.
    • Able to lift up to 40 lbs.
    • Will access and work in the manufacturing plant.
    • Will be required to stand for extended periods of time when conducting training, CI events or work cell duties.
    • While performing the duties of this job, employee may be exposed to moving mechanical parts, fumes and airborne particles.
    • May be required to travel to other site locations for training purposes.
    • May be required to work OT and weekends to meet department and business demands.
    • Work with safe manufacturing processes and understands PPE that is required in the manufacturing area.
    • Knows the purpose and location of Material Safety Data Sheets.

     
    Special Requirements:
    Employment is contingent upon successfully passing an employee reference check, criminal background check, and drug screening.
    This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR).


    PDS Tech is a premier supplier of highly skilled technical personnel to the aerospace and defense industries.  These are long term assignments in the Panama City, FL area. Client is accepting resumes now for review.  Please connect with us now for immediate consideration.  Apply to this posting, or contact Gus Sanchez at 314-264-3135 or gsanchez@pdstech.com for more information.

     
     
    Job Number: 1910097507
    Job Location: Panama City, FL
    Per Diem: Yes
    Duration: 6 months
    Input Date: 05/02/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Gus Sanchez
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r8mbQAA&URLSource=cjhunter

    Cabinet Finisher II

    Description:
    PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

    Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

    Principal Duties and Responsibilities: 

    Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

    Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

    Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
     

    Education and Experience Requirements:

    High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

     



    Unique Skills:



    Knowledge of Solumina preferred but not required.

    Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


     
    Job Number: 1810082578
    Job Location: Savannah, GA
    Duration: 6 months
    Input Date: 04/25/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rodney Kinlaw
    Address: 900 CIRCLE 75 PKWY SE STE 600
    City, State: ATLANTA, GA 30339
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

    Calibration Development Engineer

    Description:
    PDS TECH INC is currently looking for a Calibration Development Engineer  for our client near Santa Clarita. 

    Responsibilities include:
    Development primary focus revolves around engine mapping.
    Responsibilities include planning, coordinating, executing and reporting on engine calibrations, engine systems or other powertrain systems as required.  
    Collect data from testing on dynamometers, test rigs, and any other external test facilities and/or at the race track.  
    Subsequent analysis and reporting is required.
    Experience with Matlab, Atlas, and AVL software preferred and with Bosch, PI/Cosworth, Motec a plus.
    Development may include performance, drivability and/or reliability of engines, engine systems and/or powertrain components per project goals. Must complete writing of test requests, daily progress, test reports and a concise presentation of testing results, analysis, conclusions and suggestions for future development as needed.
    Must be able to execute tests first-hand, able to (post-) process raw data and present final results to technical reviews.
    Post processing experience with engine controls system such as Simulink is preferred.


    Qualifications
     
    Requirements include Bachelor's of Science in Mechanical Engineering or equivalent with a solid understanding of internal combustion engines; 3-5 years minimum experience with development and testing of racing engine or chassis components.
     
    Previous dynamometer testing of high performance race engines including setup and maintenance; technical report writing. Previous experience with AVL Puma, MTS/Adapt, Pi Toolbox or Wintax software a plus.
     

    Must have the ability to plan, organize, schedule and coordinate activities for self-based on an evaluation of work needs and an estimation of timing and create efficient test procedures, specifying the necessary data acquisition and analyze the results to reach an accurate conclusion and present suggestions for follow-up work.
    Must have excellent verbal and written communication skills; ability to work in team environment and able to work under minimal supervision; ability to be self-directed, detailed oriented who can effectively work well under pressure in a diverse environment.
    Willingness to be hands on in a fast pace environment.

     

     
    Job Number: 1910098708
    Job Location: Santa Clarita, CA
    Per Diem: No
    Duration: 12 months
    Input Date: 02/25/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Hemant Sachdev
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTqsQAE&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Catia Fixture Design Engineer W/Secret Clearance

    Description:
    *This is a full-time, 6 month contract position located in Lexington, KY*
    We are seeking a skilled mechanical engineer who will be designing our manufacturing systems, including fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment. Candidate will analyze sketches, specifications, drawings to determine design factors such as size, shape, and arrangement of parts; oversees the tool designer who will be creating fixtures, tooling and equipment. Candidate will develop test procedures and update existing technical manuals.



    Daily duties will involve designing, developing and implementing industrial machinery and equipment taking into account accessibility, economy, mobility, and performance requirements. Will use CAD/CAM to design tools, CATIA.



    Required:
    *9 years experience in machinery or tool design using a CAD package, preferably, CATIA.

    *Experience with tools, dies, gauges, jigs, fixtures, prototype and experimental model production.

    *Familiar with factors in tooling such as as accessibility, economy, mobility, and performance requirements.
    *Experience in analyzing and interpreting engineering drawings and technical documents and formulating test procedures.

    *Experience with Teamcenter or similar PDM/PLM software tool
    *Active Secret Clearance

    *4 year degree



    Preferred:

    *GD&T knowledge




    Requirements


    Education BSME
    Years of Experience 5
     
    Job Number: 660
    Job Location: Lexington, KY
    Input Date: 05/07/2019
    Firm Name: CSS STAFFING
    Attention: Tom Clark
    Address: 263 E MAIN ST 2ND FL STE A
    City, State: NEWARK, DE 19711
    Phone: 302/737-4920
    Website: www.cssstaffing.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Completions Design Engineer

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

    Unique Skills:
    • Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions Engineering.
    • Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft.
    • Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations.
    • Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis.
    • Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements.
    • Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam.
    • Design Engineer will be required to liaison with the shop on engineering issues.
    • Design assignments include but are not limited to: -Item Installation Analysis and Similarity Analysis
    • Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
    • Perform other duties as assigned.
    • Advanced degree in engineering, or related curriculum preferred
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 24-344
    Job Location: Savannah, GA
    Rate: $58
    Per Diem: YES
    Overtime: YES
    Duration: 1 Year plus
    Start Date: ASAP
    Input Date: 05/20/2019
    Last Updated: 05/31/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Composite Structural Design Engineer Openings

    Description:
    Design and configuration of composite primary aircraft structure.
    Experience during preliminary/conceptual design phase required.
    Support of subsystems integration and packaging into primary structure.
    Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
    Analyze the applicability of new and emerging technologies and advanced techniques.
    Serve as a design focal between the program and Tier 1 suppliers.
    Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
    Support new business development, trade studies and proposal activities.
    Support technical review of supplier capabilities and progress.

    Requirements:
    Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
    Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
    Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
    8+ years of experience in performing design of large aerospace structures.
    Strong composite structural design background.
    Proficiency with CATIA V5 and Teamcenter PLM is preferred.
    Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
    Thorough understanding of the structural design requirements for Part 25 certification is preferred.
    Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

    The Structures Company, LLC is an AA/EOE.
     
    Job Location: Reno, NV
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: Long-term
    Start Date: ASAP
    Input Date: 05/28/2019
    Last Updated: 06/14/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Chris Sheets
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: chrissheets@thestructurescompany.com
    Website: www.thestructurescompany.com

    Data Integrity Checker

    Description:
    Location: Savannah, GA
    Rate: $53.00/HR
    Duration: Long Term Contract

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    - Check 2D and 3D engineering data and 3D models for conformance to company requirements as directed.
    - Check parts for fit, form and function to the extent that information is available.
    - Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA V5, SmarTeam, as well as other CAD datasets, in accordance to company requirements as directed.

    Checkers are responsible for determining the acceptability of data in the following areas:
    - Accuracy and completeness of engineering product definition data, including CAD and PDM data.
    - Proper application and compliance with all Engineering and customer drawing requirements.
    - Use and understanding of GD & T a must.
    - Dimensioning and tolerancing including familiarity with ASME Y14.5.
    - Application of best drafting and design practices and procedures.
    - Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
    - Advise Design personnel regarding company drawing and design practices and procedures.
    - Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
    - Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
    - Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
    - Knowledge of company parts list & PdocM, a plus.

    Essential Duties and Responsibilities
    - Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
    - Ensures designs meet customer criteria, quality standards and FAA requirements.
    - Adheres to budget and project schedules.
    - Provides design guidance and feedback to other engineering personnel.
    - Other duties as assigned.
    - Knowledge of industry design and documentation standards.
    - Experience with mechanical assemblies and manufacturing technique design.
    - Ability to work independently and cross-functionally.
    - Experience in communicating with employees/teams in productive and efficient manner.
    - Strong communication and problem-solving skills.

    Education and Experience Requirements:
    Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

    Principal Duties and Responsibilities:
    Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

    Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

    Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
     
    Job Number: 10373
    Job Location: Savannah, GA
    Rate: $53.00/HR
    Per Diem: Split Possible
    Duration: LT
    Input Date: 03/19/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Design Engineer

    Description:
    Chipton-Ross is seeking a Design Engineer for an opening in Arlington, TX.

    RESPONSIBILITIES:
    Designs, researches and develops structural engineering layouts, components and assemblies involving metals, non-metallic or composite structural materials for product design, or operation of product to include structures, mechanical, hydraulic, electrical and electronics, power plant, armament, heating and ventilating, equipment and maintenance designs. Develops and maintains engineering bills of material and product structures. Coordinates the inputs of a variety of disciplines including stress, manufacturing engineering and product support to ensure all engineering requirements are incorporated into the design. Specific design engineering specialties may include airframe, mechanisms and subsystems installations. Tools utilized include CATIA and Enovia (3D Experience).

    REQUIRED EXPERIENCE:
    Complete understanding and wide application of technical principles, theories, and concepts in the field. General knowledge of other related disciplines. Provide technical solutions to a wide range of difficult problems. Solutions are imaginative, thorough, practicable, and consistent with organization objectives. Works under supervision of direct company design lead. Work is reviewed upon completion for adequacy in meeting objectives.

    EDUCATION:
    Accredited Bachelor's degree or equivalent and six (6) years of related experience.

    WORK HOURS:
    Full-Time

     
    Job Number: 178035
    Job Location: Arlington, TX
    Rate: Up to $60.00 DOE
    Duration: 6+ Months
    Input Date: 03/19/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Kevin Suk
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: ksuk@chiptonross.com
    Website: www.chiptonross.com

    Design and Analysis Engineer 3

    Description:
    Chipton-Ross is seeking 3 Diagnostic Modeling Analysis openings in Hazelwood, MO.

    RESPONSIBILITIES:
    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink.
    The chosen candidate will work with the latest generations of aircraft platforms (both commercial and military). The chosen candidate should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). The chosen candidate will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning. Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    EDUCATION:
    Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    TRAVEL: 10%

    FULL TIME/FIRST SHIFT
    WORK HOURS: 8:00 AM - 4:30 PM


     
    Job Number: 179056
    Job Location: Hazelwood, MO
    Rate: $DOE
    Duration: 12 Months
    Input Date: 04/30/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Robert Davis
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: rdavis@chiptonross.com
    Website: www.chiptonross.com

    Designer, Bleed Air Systems/Vapor Cycle Systems

    Description:
    PDS Tech is currently recruiting for a Bleed Air Systems Engineer in Greensboro, NC.

    General Summary: 

    The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.
     
    Duties and Responsibilities:

    • Prepare 3D layout models of the BAS and VCS.
    • Prepare 3D installation and detail models of the BAS and VCS.
    • Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
    • Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

    Education, Work Experience, Certification and/or Licensure:



    • Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

     
    Knowledge, Skills and Abilities:


    • Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.  Minimum of 10,000 hours.
    • Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
    • Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.

     
    Job Number: 1910096770
    Job Location: Greensboro, NC
    Duration: 12 months
    Input Date: 04/09/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Lucinda Contreras
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r6AwQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Door Design Engineers - Many Needed

    Description:
    Required: o Minimum 5 years aircraft structure and/or mechanical system design experience o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings o 14 CFR Part 23/25 aircraft door design experience (passenger entry, cargo, emergency exit) o Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.) o Aircraft mechanical system design; o ASME Y14.5 Geometric Dimensioning and Tolerancing o Preferred: CATIA V6 and Enovia experience.

    Email resume to: mmccarthy@pdstech.com
     
    Job Number: Tex-Door-KS
    Job Location: Wichita, KS
    Rate: $65.00-$68.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 06/07/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    Drafter / Designer

    Description:
    PDS Tech is seeking a Drafter / Designer in Phoenix AZ.
     
    The ideal candidate will perform mid-level complexity drafting and design of assembly drawings based on layouts, sketches and blueprints.  These may include utilization of computer aided design applications.
     
    Required:
    • Must be familiar with ASME Y14.100 and its interpretation.
    • Experience with Geometric Dimensioning and Tolerancing (GD&T)
    • Ability to incorporate red-lines to original drawings from shop drawings.
    • Ability to create and maintain Bill of Materials (BOM), Change Orders (CO) drafting, and other documentation to support engineering.
    • Capable of creating complex 3D model parts and assemblies.
    • Proficient in Mechanical Drawings, Fabric Drawings, Source Control Drawing, Specification Control Drawings
    • Proficient in translating electronic documents between various formats (DWG, DXF, STP, PDF, ZIP, etc.)
    • Pro/E Wildfire 5 / Creo Elements 1.0 or higher
    • Keycreator / Cadkey (other 2D CAD tools acceptable)

    Candidate must have an Associates’ degree or higher


     
    Job Number: 1910100044
    Job Location: Phoenix, AZ
    Duration: 6 months
    Input Date: 03/28/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYV4QAM&URLSource=cjhunter

    Drafter / Designer

    Description:
    The ideal candidate will perform mid-level complexity drafting and design of assembly drawings based on layouts, sketches and blueprints. These may include utilization of computer aided design applications.

    Required:
    • Must be familiar with ASME Y14.100 and its interpretation.
    • Experience with Geometric Dimensioning and Tolerancing (GD&T)
    • Ability to incorporate red-lines to original drawings from shop drawings.
    • Ability to create and maintain Bill of Materials (BOM), Change Orders (CO) drafting, and other documentation to support engineering.
    • Capable of creating complex 3D model parts and assemblies.
    • Proficient in Mechanical Drawings, Fabric Drawings, Source Control Drawing, Specification Control Drawings
    • Proficient in translating electronic documents between various formats (DWG, DXF, STP, PDF, ZIP, etc.)
    • Pro/E Wildfire 5 / Creo Elements 1.0 or higher
    • Keycreator / Cadkey (other 2D CAD tools acceptable)

    Candidate must have an Associates’ degree or higher
     
    Job Number: 1910100044
    Job Location: Phoenix, AZ
    Overtime: possible
    Duration: 6 months
    Start Date: ASAP
    Input Date: 06/05/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: sspolzino@pdstech.com
    Website: www.pdstech.com

    E-Drive Integration Engineer

    Description:
    PDS Tech, Inc. is seeking an E-Drive Integration Engineer in Auburn Hills, MI.

    Summary:

    • E-Motor hubs packaging verification, and release for prototype and production to specific customer applications.
    • Verifies torque control, power management, and thermal management of the E-Motor hubs and e-drive system.
    • Testing and validation of motor control and motor sensor subsystem requirements.
    • Diagnoses and corrects deficiencies in designs and prototypes.
    • Understands test machine requirements and instrumentation.
    • Support for motor control and motor sensing subsystem analysis, modeling, and design.
    • Design and optimizes the e-drive system including packaging and development of CVT in cooperation with the supplier.
    • Dynamic lean design and optimization
    • Designs and optimizes simultaneous system performance goals through requirements flow down.
    • Effectively integrates all aspects of a design using multi-disciplinary engineering.
    • Understands and creates system and subsystem specifications.
    • Assists in maintaining cost controls.
    • Familiar with preliminary analysis and simulation to detect stresses conditions on subsystems and on component design level.
    • Experience with design, development, validation and integration.
    • Basic skills in analysis and simulation parameters to set up through the CAD models. Familiar with the mains manufacturing processes: sand casting, die casting, injection plastic components, sheet metal forming, gravity casting.

    Qualifications / Education:
    • BS in Electrical Engineering or Mechanical Engineering required with emphasis in electric machines and drives, magnetic sensing subsystems, embedded systems, and/or electromagnetics preferred.
    • Five years’ experience working with e-drive systems.
    • Strong computer skills and knowledge of design and simulation tools (e.g. Catia V5, NX,) is required.
    • Able to generate 3D math models and 2D prints for complex parts.
    • General competency in all core fields (electronics, electromagnetics, computer hardware and software) is preferred.
    • Excellent problem-solving techniques.
    • Knowledge of system synthesis, analysis and verification techniques.
    • Good organization and documentation abilities.
    • Must be able to view a computer screen or monitor for extended periods of time.
    • Must be able to sit or stand for extended periods of time.

     
    Job Number: 1910102061
    Job Location: Auburn Hills, MI
    Duration: 12 months
    Input Date: 05/07/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Katie Windhurst
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjZQAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    E/M Designer

    Description:
    The Electro-Mechanical Designer position is responsible for modeling and drawing generation of a wide range of electro-mechanical hardware and components designed for use in elevator systems (Creo 3.0 Cabling knowledge required).
    The candidate should not only be adept at handling typical design tasks (modeling and detailing), but must be able to effectively communicate cross-functionally.
    The designer will be member of the Design Services Group operating out of Florence South Carolina that is home to the North American System Elevator Engineering, Manufacturing, and Supply Chain operations.

    Additional Job Details:
    QUALIFICATIONS/EXPERIENCE:
    Preferred Experience Requirements:
    * 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in electro mechanical designs.
    * Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
    * Ability to apply GD&T to parts and assemblies per design requirements.
    * Ability to perform tolerance analysis calculations.

    Regular Experience Requirements:
    * Strong communications skills.
    * Ability to work effectively within a team environment.
    * High energy and passion for innovation and creativity.
    * Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).
     
    Job Number: 29501
    Job Location: Phoenix, Az
    Rate: 39
    Duration: 24 months
    Start Date: ASAP
    Input Date: 05/07/2019
    Firm Name: APOLLO PROFESSIONAL SOLUTIONS
    Attention: Rick Nussbaum
    Address: 7310 RITCHIE HWY STE 400
    City, State: GLEN BURNIE, MD 21061-3092
    800 Phone: 866/277-3343
    Website: www.apollopros.com

    ECS & Ice Protection Design Engineer

    Description:
    PDS Tech is seeking an Ice Protection Design Engineer in Wichita, KS

    Responsible for design, development, and certification in the area of systems for new and existing 14 CFR Part 23/25
    Responsible for development and documentation of system architecture, system requirements, system schematics and computer simulations, coordination of system test article fabrication and/or validation of initial design through physical test, and certification documentation of aircraft hydraulic systems.
    Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports. Reviews engineering drawings for systems prepared using computer based drafting tools (CATIA/CCD and/or CATIA V5).Supplier coordination and review of supplier engineering documents. Troubleshooting activities in both production and field environments.
    Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.
    Required: 
    Engineering Degree Required


    o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft 

    o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings 

    o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.) 

    o Aircraft mechanical system design 

    o Preferred: CATIA V6 and Enovia experience
     
    Job Number: 1910101914
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 05/13/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Rick Ingle
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gINQAY&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ECS & Ice Protection Design Engineers

    Description:
    Required:
    Engineering Degree Required
    o 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
    o CATIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
    o Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
    o Aircraft mechanical system design
    o Preferred: CATIA V6 and Enovia experience

    Email resume to: mmccarthy@pdstech.com
     
    Job Number: ECS=Tex-KS
    Job Location: Wichita, KS
    Rate: $65.00-$70.00/hour
    Per Diem: Possible
    Overtime: Possible
    Duration: 6 Months+
    Start Date: ASAP
    Input Date: 05/31/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    ECS & Pneumatic Subsystems Engineer

    Description:
    Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

    Duties include, but are not limited to:
    • Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
    • Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
    • Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
    • Provide validation and verification of ECS & Pneumatic systems requirements
    • Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
    • Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
    • Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
    • The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
    • She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

    Minimum Requirements:
    • Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
    • Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
    • Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
    • Master’s degree in a technical and/or management specialty preferred
    • 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
    • 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
    • In-depth and current knowledge of Part 25 regulatory requirements
    • Experience and expertise in the development of commercial and/or high-end business jets strongly desired
    • Recent experience in developing ECS systems from concept through certification strongly desired
    • Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
     
    Job Number: 42-001
    Job Location: Reno, NV
    Rate: DOE but very competitve
    Per Diem: YES
    Overtime: Possible
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 05/31/2019
    Last Updated: 05/31/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    ECS System Engineer - UM

    Description:
    PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

    Job Responsibilities:
     JOB RESPONSIBILITIES:
    • Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
    • Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
    • Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
    • Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

    EDUCATION / EXPERIENCE:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs



     
     



     
    JOB QUALIFICATIONS:
    • Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
    • Experience with domestic and foreign aircraft certification process is desired.
    • Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
    • A working knowledge of DO-178 & DO-254 is desired.
    • Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Ability to use Reliability Workbench (Fault Tree+) is desired.
    • Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

     
    Job Number: 1910097709
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 01/24/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    EE Technical Designers in Tukwila, WA

    Description:
    EE Technical Designers Level (2, 3)

    Location: Tukwila, WA
    Duration: 6+ months

    Description:
    Develops, maintains and releases electrical/mechanical drawings, systems designs or engineering documentation and data by applying company, industry and governmental standards. Using design tools prepares documentation and incorporates design changes. Creates, develops and maintains systems designs by preparing design layouts, modifying existing designs and assisting in identifying design discrepancies. Supports engineering system design and functionality validation activities. Develops and maintains product installation designs and part designs ranging from simple to moderately complex. Coordinates activities and products with internal partners and external suppliers. Works under general direction.

    The Electrical Engineering Technical Designer will be supporting primarily BDS and BCA programs and may need to support in an office setting as well as a factory and flight line setting.

    Education / Experience:
    AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    Skill Code: 625-Electronic/Electrical Design
     
    Job Location: Tukwila, WA
    Rate: Open
    Per Diem: Split
    Overtime: Yes
    Duration: 6 months
    Start Date: Asap
    Input Date: 01/24/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    Egress Technician

    Description:
    PDS Tech, Inc. is seeking a Egress Technician in Jacksonville, FL.

    Summary:

    • General This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty.
    • Maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.
    • Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions.
    • Applies required expertise in restoring equipment condition and or operation.
    • Applies comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as; blueprints or manufactures manuals.

    Education and/or Training Requirements:

    Mechanic must have a thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts, requires broad knowledge of aircraft sheet metal/structural modifications and repair, must have basic knowledge of electrical theory, must have thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. This job requires working knowledge of technical publications. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects. Must be able to Jack, Tow, and Operate various types of support at required to meet program needs. Mechanic may be required to become ordinance certified for Aviation Life Support Systems Maintenance was required.


    ** Must have Formal Military Training on the ACES II Ejection System**

    **Must have experience with Removal and Installation of Ejection Seat, Canopy, Parachute, Survival Kit, CRU-60/94**


    Experience Required: 

    Position requires 4+ years of experience in those duties as previously on the F-16 Platform.
    Recent F-16 or other fighter aircraft experience preferred.
    Must have formal ACES II Military education or equivalent.
    Must have 4+ Years of Experience working to Military Tech Data in the execution of ACES II system maintenance.


    Occupation or Operation Requirement:
     
    Job Number: 1910099978
    Job Location: Jacksonville, FL
    Duration: 12 months
    Input Date: 03/18/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Michael Coonce
    Address: 3922 COCONUT PALM DR STE 100
    City, State: TAMPA, FL 33601
    800 Phone: 866/224-2745
    Email: southeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jYL5QAM&URLSource=cjhunter

    Ejection Seat Test Engineer

    Description:
    PDS Tech is seeking an Ejection Seat Test Engineer in CO Springs, CO.
     
    We are looking for a highly motivated individual to join our expanding Ejection Seat Design team located on the front range of the Rocky Mountains in beautiful Colorado.  The Ejection Seat Design team is a dream position for an Engineer wanting work with very challenging requirements, state of the art technologies, advanced materials, cartridges, rockets, computer-controlled devices, subsonic & supersonic aerodynamics, parachutes, aircrew equipment including advanced helmet mounted displays, and the appreciation for saving an aircrew life every few months.
     
    The Ejection Seat Test Engineer will support the analysis and testing of ACES ejection seat components and subsystems.  The position will provide engineering deliverables through qualification testing and the initial production implementation.  The individual will propose new technology, create innovative design solutions, support design reviews, work directly with customers, drawing release/review and support testing of the product.




     
    Responsibilities:
    • Test Leader for small & medium (<$500K/yr) projects or potentially be the Lead Test Engineer for a subsystem design effort for large ejection seat program project.
    • Successfully executes on test tasks required to develop and qualify aircraft ejection seats.
    • Utilize NX 8.5 CAD and Team Center Product Lifecycle Management (PLM) software to evaluate 3D design models and to facilitate the drafting department in producing drawings
    • Review work submitted from the Global Engineering Center-India (GEC-I) and coordinate with appropriate Engineering Resources.
    • Work as part of a cohesive engineering team and with the Integrated Product Development Team (IPDT) to test various aircraft seating products.
    • Work as part of a cohesive test team testing ejection seats with state-of-the-art anthropometric manikins at ejection velocities from zero airspeed to beyond the speed of sound (800+ MPH groundspeed)
    • Review requirements and evaluate new product test and functionality in support of meeting customer requirements and successful qualification efforts.
    • Facilitate and execute necessary testing to ensure product safety.
    • Interact with Program Management to ensure customer satisfaction.
    • Assist Engineering Management to coordinate the timely delivery of product test and customer proposal requests.
    • Conceptualize and prepare preliminary and final detail test documentation for systems, components, and assemblies.
    • May occasionally design test fixtures, tooling, and aircraft fuselage mounts and undercarriages to mount to our test facility track.
    • Adhere to all rules and codes of conduct.
    • Perform other duties as required.

    Skills Required:

    • Ability to visualize, test and evaluate cutting edge mechanical structure, mechanisms, cartridge actuated devices, parachutes, head/neck protection devices, arm restraint devices, leg restraint devices, torso restraint devices, survival equipment, etc. to enable safe ejection that meets the very stringent department of defense expectations for ejection seat performance.
    • Detail oriented and thorough in all assigned tasks
    • Innovative and driven to complete all assigned tasks to the project schedule.
    • Strong customer skills and customer focus (both internal and external customers)
    • Strong analytical skills including strong knowledge of physics, dynamics, and statics.
    • Ability to work independently or as part of an integrated product team.
    • Ability to multi-task with strong organizational skills and prioritize both daily issues and long-term projects.
    • 100% dedicated to following all safety procedures and precautions.
    • Excellent interpersonal skills.
    • Excellent written and verbal communication skills
    • Ability to present test solutions
    • Excellent computer skills, including skill in Microsoft Office applications and the ability to independently learn new software.

    Education:

    • Bachelors.

     
    Job Number: 1910101206
    Job Location: CO Springs, CO
    Duration: 12 months
    Input Date: 04/17/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033e6CQAQ&URLSource=cjhunter

    Electric System Component Outfitting Interface Engineer

    Description:
    This position is located in Nagoya, Japan.

    Electric system component outfitting interface engineer
    • Mechanical/ structural interface engineering expertise
    • Willing to be a leading engineer rather than just a manager or an advisor

    • 10+ years experience 
    • Bachelors Degree in Engineering
    • International experience desirable. 
    • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

     
    Job Number: 1610044922
    Job Location: Nagoya,
    Duration: 36 months
    Input Date: 09/05/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Keith Zingler
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i5000000037FjAAI&URLSource=cjhunter

    Electrical Engineer

    Description:

    PDS Tech is seeking an Electrical Engineer in Florence SC.



     



    The ideal candidate will perform research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.



     



    This position will provide product support for a variety of elevator components and electrical systems.  The position will play a crucial role in maintaining product integrity, evaluating opportunities, and integrating new component designs into existing systems, while working to meet agreed upon cost and schedule commitments. 



     



    The candidate should be able to interpret schematics, wiring diagrams, mechanical assembly drawings, and sometimes building plans in order to analyze complex problems and identify root cause issues and develop innovative solutions.  Ability to work across disciplines with mechanical engineers, software engineers, manufacturing personnel, and field personnel is required.


    Experience/Qualifications:
    • MA/MS degree with 1 to 2+ years’ experience BA/BS degree with 2 to 5+ years’ experience.

    Preferred Skills:

    • Sound Electrical Engineering background including wiring diagrams, systems analysis, motor and control applications, and control logic.
    • Control System Logic and Power Electronics.
    • Ability to work with suppliers/3rd parties.
    • Experience with test and measurement equipment.
    • Understanding of mechanical and software functions. 
    • ECAD tools (Cadence, E3, or others). 
    • Strong communications skills and leadership ability. 
    • MS Office applications (Word, Excel, Power Point, etc.).

     
    Job Number: 1910102093
    Job Location: Florence, SC
    Duration: 7 months
    Input Date: 05/15/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gmOQAQ&URLSource=cjhunter

    Electrical Engineer

    Description:
    PDS Tech, Inc. is seeking an Electrical Engineer in Auburn Hills, MI.

    Summary:

    • Develop, validate and integrate the functionality of e-motor hub system, dynamic lean system, integrated display unit, and sensors.
    • In charge to integrate the software platform for infotainment, vehicle performance monitoring, torque and power distribution
    • Development of the powertrain sensors and controllers
    • Development of the strategy for the dynamic lean system; step by step electrical motor to balance the vehicle under specific conditions and loads
    • Lighting/signals subsystem development

    Qualifications/Education:
    • Bachelor’s degree in Electrical or Mechanical Engineering.
    • 5+ years’ experience and capability to work with various data acquisition tools.
    • 5+ years’ experience with Matlab or equivalent tools.
    • 5+ years’ experience with sensor development.
    • 5+ years’ experience with controls.
    • Strong mechanical understanding or Mechanical engineering background with strong electrical understanding is preferred.
    • Must be able to manage multiple concurrent assignments with proper prioritization.
    • Excellent interpersonal and collaborative skills are necessary to be successful in this position.
    • Proactive approach to evaluate efficient and innovative solutions even to quickly troubleshoot urgent situations.

     
    Job Number: 1910102060
    Job Location: Auburn Hills, MI
    Duration: 12 months
    Input Date: 05/09/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Katie Windhurst
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033gjUQAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Description:
    AutoCad required. CHS experience preferred. 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.

    Education and Experience Requirements:
    Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


    Position Purpose:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:

    Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

    Advanced degree in engineering or related curriculum preferred

    The Structures Company is an AA/EOE.
     
    Job Number: 289
    Job Location: GA
    Rate: Up to $68/Hr.
    Per Diem: Yes
    Duration: 9+ Months
    Start Date: ASAP
    Input Date: 06/06/2019
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer

    Description:
    Location: Savannah, GA
    Rate: $68.00/HR
    Duration: Long Term Contract
    Shift: 4x10
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    Required Skills:
    1. AutoCad required. CHS experience preferred
    2. Company Completions electrical system design experience preferred.
    3. 14 CFR 25 Subpart H - EWIS experience preferred
    4. Part 25 Certification Experience for Cabin Interiors preferred
    5. Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems.
    6. Experience with power distribution, lighting, switching, sizing, and routing required.
    7. Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
    8. Familiarity with aircraft STC procedures preferred.

    Education and Experience Requirements:
    1. Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    2. Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
    3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    1. Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Responsible for an entire engineering project of major complexity within established scope
    2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    4. Leads the development of innovative principles and ideas
    5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    6. Works under consultative direction; uses independent judgment to accomplish objectives
    7. Develops standards and guides for diverse engineering activities
    8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering or related curriculum preferred
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10651
    Job Location: Savannah, GA
    Rate: $68.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/20/2019
    Last Updated: 05/16/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    Electrical Engineer 4

    Description:
    Unique Skills:
    • AutoCad required, Catia V5 and CHS preferred.
    • GV,GVI, electrical system design experience preferred.
    • 14 CFR 25 Subpart H - EWIS experience preferred
    • Part 25 Certification Experience for Cabin Interiors preferred
    • Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
    • Experience with power distribution, lighting, switching, sizing and routing.
    • Familiarity in mechanical system design
    • Familiarity with aircraft STC procedures preferred.
    • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required

    Position Purpose:
    Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

    Principle Duties and Responsibilities:
    • Responsible for an entire engineering project of major complexity within established scope
    • Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities
    • Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
    • Leads the development of innovative principles and ideas
    • Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
    • Works under consultative direction; uses independent judgment to accomplish objectives
    • Develops standards and guides for diverse engineering activities
    • Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
    • Advanced degree in engineering or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-362
    Job Location: Savannah, GA
    Rate: $58 - $63
    Per Diem: YES
    Overtime: YES
    Duration: 1 year plus
    Start Date: ASAP
    Input Date: 06/07/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Engineer - AutoCAD

    Description:
    1) AutoCad required. CHS experience preferred 2) Gulfstream Completions electrical system design experience preferred. 3) 14 CFR 25 Subpart H - EWIS experience preferred 4) Part 25 Certification Experience for Cabin Interiors preferred 5) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems. 6) Experience with power distribution, lighting, switching, sizing, and routing required. 7) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred. 8) Familiarity with aircraft STC procedures preferred.
     
    Job Number: 19-144018
    Job Location: GA
    Rate: $68.00
    Per Diem: Yes
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 05/03/2019
    Last Updated: 05/14/2019
    Firm Name: AGENTE TECHNICAL
    Attention: Alexa Bui
    Address: 714 CENTERPARK DR STE 140
    City, State: COLLEYVILLE, TX 76034-2852
    Phone: 972/415-4545
    800 Phone: 866/758-2494
    Fax Phone: 866/717-5927
    Website: www.agentetech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical Systems Engineer

    Description:
    Role Summary/Purpose
    The Systems Engineer will be responsible for working on the concept, requirements, design, development and testing of an aircraft electrical power system.

    Essential Responsibilities
    In the role of Systems Engineer, you will utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining, allocating, validating, tracing, verifying, and documenting customer requirements. You will help in certifying electric power systems on commercial airplanes.

    In addition, as a Systems Engineer, you will:

    • Design Power Systems Architectures in co-operation with aircraft manufacturers
    • Utilize your power electronics, power generation and distribution, controls, software, and simulation expertise to work with the customer in defining requirements
    • Derive system interfaces
    • Work with subsystem leads in developing, allocating, validating, tracing, verifying, and documenting requirements
    • Perform system analysis, safety analysis, modeling, and simulation
    • Develop the systems test environment
    • Development system test plans and procedures and get their approval with the customer
    • Work on developing and releasing test reports to customers
    • Define Safety of Flight and Qualification tests and ensure that critical safety aspects of electric system are tested and verified to enable flight test program
    • Develop and execute objectives for yourself and others; can affect short-term and some long-term business goals
    • Maintain scope baseline
    • Work with both real-time and non-real-time systems, such as hardware-in-the-loop and computer-in-the-loop simulations and be able to distribute these simulations
    • Document the results of analyses and studies in technical reports
    • Develop significant Customer interaction and relationship acting as reliable focal point for assigned LRU.
    • Assure proper documentation of technical data generated for the assigned tasks consistent with engineering policies and procedures
    • Support technical and program reviews

    Qualifications/Requirements

    • Degree in Mechanical/Aeronautical/ Electrical Aerospace Engineering
    • Experience in requirements development, verification and validation
    • Experience in system engineering and project management/planning
    • Knowledge of aircraft power distribution and generation
    • Clear thinking and diligent approach
    • Strong interpersonal and communication skills

    Desired Characteristics

    • Knowledge of electrical power systems technical requirements, certification requirements
    • Experience/ knowledge of the development lifecycle phases
    • Strong technical aptitude, including applicable engineering tools and systems, i.e. DOORs
    • Good written and verbal communication skills.
    • Proven ability to contribute in a team environment
    • Experience of RTCA DO-178B/C, SAE ARP4754A or similar rigorous development standard
    • System mindset and problem solver
     
    Job Number: 35475
    Job Location: Dayton, OH
    Input Date: 05/06/2019
    Firm Name: TAD PGS INC
    Attention: Kim Silcott
    Address: 12062 VALLEY VIEW ST STE 108
    City, State: GARDEN GROVE, CA 92845
    Phone: 714/622-3967
    800 Phone: 800/261-3779
    Fax Phone: 714/897-8455
    Website: www.tadpgs.com

    Electrical UM (23&25)

    Description:
    PDS Tech, Inc. is seeking Electrical in Wichita, KS
    This role will gain valuable engineering experience in the area of design requirements including capture, design, validation, troubleshooting, and certification of aircraft avionic and electrical systems. Working with managers and key players in Engineering, Candidates will assist in the development and evaluation of crucial systems on  Aviation Products. Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD and/or IAI HarnesSys). Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft. Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents. Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc. Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.

    Job Responsibilities:
    • DER/UM-related duties missing; ensuring that the proposed design is certifiable, coordinating with the FAA, resolution of certification issues, determination of the certification basis, writing the certification plan, witnessing certification testing, find compliance.
    • Responsible for successful integration and certification of vendor equipment into Cessna Citation aircraft. Assists in preparation of reports, engineering drawings, reports and other documents. Coordinates with direct and indirect customers and suppliers to determine system requirements and resolve problems.
    • Responsible for completing complex development, design, testing and certification assignments for new design or modifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome.
    • Conducts research, calculations, estimates and drafting of projects to conform with established specifications such as capacities, styling, performance and determine status of work in progress. Performs above work utilizing frequent application of in-depth engineering principles.
    • Maintain a high degree of proficiency in computer applications to accomplish tasks.
    • Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with supplier to discuss and remedy issues in a timelier and efficient manner.
    • Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
    • Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
    • Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
    • Reviews and evaluates supplier proposals for potential utilization on future models.
    • Provides guidance to engineers and report writers in the solution of specific, complex design problems, which must be resolved during development and testing.
    • Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and update presentations to management of engineering and other company organizations and tools.

    EDUCATION:
    • B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
    • Minimum 7 years of experience in General Aviation or Business Aircraft development programs

    JOB QUALIFICATIONS:
    • Electrical DER qualifications (FAR 23 or 25).
    • Experience with domestic and foreign business and/or general aviation aircraft certification process is required
    • Some experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
    • Experience with Microsoft Office software application and working environment is required.
    • The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities.
     
     
    Job Number: 1910098626
    Job Location: Wichita, KS
    Duration: 12 months
    Input Date: 02/20/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jTbWQAU&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electrical, Electronic and Electro-mechanical Components Engineer

    Description:
    Electrical, Electronic and Electro-mechanical (EEE) Components Engineer

    Location: Grand Prairie, TX (75051)

    9 month contract

    Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX. The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electro mechanical components used in military applications. The selected Candidate should be a self-starter, capable of handling several tasks at once. The selected candidate must be able to work without supervision. Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.

    Skill/Experience/Education
    Mandatory: Must be able to obtain a security clearance.
    Must be proficient with computer tools such as MS Excel and Access.
    Candidate should have experience in electrical component manufacturing process and physical property analysis.
    This position requires periodic travel to both the customer and supplier locations.

    Desired-
    The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
    Experience in Components Engineering with broad knowledge of electronic components and devices.
    The ideal candidate has experience working electrical components on a Production Program.
    Experience in the disposition of Q-Notes.
    Experience with parts release process, and with formal Configuration Board support.
    Experience working with Global Supply Chain, Quality and Manufacturing groups.







    ____________________________________________________________________

    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 56604
    Job Location: Grand Prairie, TX
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 9+ months
    Start Date: 04/22/19
    Input Date: 04/11/2019
    Last Updated: 05/20/2019
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Laura Leszek
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    Electro-Mechanical Designer (CREO Cabling)

    Description:
    PDS Tech is seeking an Electro-Mechanical Designer in Florence SC.
     
    The Electro-Mechanical Designer position is responsible for modeling and drawing generation of a wide range of Electro-Mechanical hardware and components designed for use in Elevator Systems (Creo 3.0 Cabling knowledge required).
     
    The candidate should not only be adept at handling typical design tasks (modeling and detailing) but must be able to effectively communicate cross-functionally.  The Designer will be a member of the Design Services Group operating out of Florence South Carolina that is home to the North American System Elevator Engineering, Manufacturing, and Supply Chain operations.
     
    Preferred Experience Requirements:
    • 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in Electro-Mechanical designs.
    • Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
    • Ability to apply GD&T to parts and assemblies per design requirements.
    • Ability to perform Tolerance Analysis calculations.

    Regular Experience Requirements:

    • Strong communications skills.
    • Ability to work effectively within a team environment.
    • High energy and passion for innovation and creativity.
    • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).

    Education:

    • Associates Degree.

     
    Job Number: 1910101762
    Job Location: Florence, SC
    Duration: 24 months
    Input Date: 05/09/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fxwQAA&URLSource=cjhunter

    Electro-Mechanical Designer (CREO Cabling)

    Description:
    The Electro-Mechanical Designer position is responsible for modeling and drawing generation of a wide range of Electro-Mechanical hardware and components designed for use in Elevator Systems (Creo 3.0 Cabling knowledge required).

    The candidate should not only be adept at handling typical design tasks (modeling and detailing) but must be able to effectively communicate cross-functionally. The Designer will be a member of the Design Services Group operating out of Florence South Carolina that is home to the North American System Elevator Engineering, Manufacturing, and Supply Chain operations.

    Preferred Experience Requirements:
    • 5 to 7 years minimum experience in Creo 3.0 Cabling module with experience in Electro-Mechanical designs.
    • Knowledge in manufacturing processes (sheet metal fabrication, welding, castings and molds, and general machining operations).
    • Ability to apply GD&T to parts and assemblies per design requirements.
    • Ability to perform Tolerance Analysis calculations.

    Regular Experience Requirements:
    • Strong communications skills.
    • Ability to work effectively within a team environment.
    • High energy and passion for innovation and creativity.
    • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, and Outlook).
     
    Job Number: 1910101762
    Job Location: Florence, SC
    Per Diem: split
    Overtime: possible
    Duration: 2 years
    Start Date: ASAP
    Input Date: 05/24/2019
    Last Updated: 06/05/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: sspolzino@pdstech.com
    Website: www.pdstech.com

    Electro/Mechanical Design Engineer

    Description:
    -Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
    -Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
    -Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
    -Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
     
    Job Number: 0878
    Job Location: Multiple
    Rate: 50-80/hr
    Per Diem: YES
    Overtime: Possible
    Duration: 6-12 months plus
    Start Date: 2/3 wks
    Input Date: 05/29/2018
    Last Updated: 06/14/2019
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: davellino@advancedtechno.com
    Website: www.advancedtechno.com

    Electronic System Design & Analysis

    Description:
    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs. This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military). You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and another available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
     
    Job Number: ESDE_Hazelwood
    Job Location: Hazelwood, MO
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 12 mon
    Start Date: ASAP
    Input Date: 05/28/2019
    Last Updated: 06/03/2019
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Vibhas Sadhu
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Email: vibhas.sadhu@acsicorp.com
    Website: www.acsicorp.com

    Electronic Systems Design & Analysis Engineer 3 - 374077

    Description:
    **Requires the ability to obtain a Secret Clearance**

    Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

    This Diagnostic Modeler position requires an engineer capable of performing analysis of reliability, maintainability, and system health of aircraft subsystems. Ability to analyze complex electrical and mechanical subsystems is essential. You will evaluate failure mode effects and criticality analysis (FMECA) data from subsystem suppliers to create fault trees and model the fault behavior using MATLAB and Simulink. You will work with the latest generations of aircraft platforms (both commercial and military).

    You should have a working knowledge of Fault Detection, Fault Isolation, False Alarm Mitigation, and No Fault Found (Can Not Duplicate). You will develop diagnostic models from schematics, FMECAs, and other available supplier documentation. The chosen candidate will translate these models to a Times Failure Propagation Graph (TFPG) model via scripts. The chosen candidate will also translate the information from the diagnostic models to MATLAB\SIMLINK models via scripts. The chosen candidate will work with a real-time software development team to create the Real Time Maintenance Computing (RTMC) application or other fault diagnostic reasoning engines.
    Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
     
    Job Number: 374077
    Job Location: Hazelwood, MO
    Rate: TBD
    Duration: 12 - months
    Start Date: ASAP
    Input Date: 04/30/2019
    Last Updated: 06/15/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Design and Analysis Engr 5- PCB Designer in El Segundo, CA

    Description:
    Electronics Design and Analysis Engr 5- PCB Designer

    Location: El Segundo, CA
    Duration: 12+ Months

    Job Description:
    Mentor Expedition Printed Circuit Board (PCB) Designer
    The PCB Designer will create printed circuit board layouts from inputs received from engineering (electrical, mechanical, manufacturing, and test).
    Job duties will include but are not limited to the following: Place and route components ensuring that all electrical and physical attributes meet the specific design requirements for each PCB design.
    Ensure that all requirements for manufacturing and assembly are met.
    Rework PCB designs when engineering design changes occur and assist the design team with ideas to resolve issues.
    Make schematic updates based upon changes from electrical engineers.

    Qualifications:
    • 5+ years of experience using Mentor Graphics Xpedition, Designer VX2.3 (schematic capture) and Layout VX2.3 (board layout), software to route complex multi-layer printed circuit board designs.
    • Associates Degree or certificate in Graphics Technology or Engineering Technology is desired.
    Must be proficient with:
    • Verifying design using Design Rule Check.
    • Using Padstacks, Cell (footprint) and Part (PDB) definitions, and building intelligence into components.
    • Utilizing Constraint Manager to define substrate and routing constraints.
    • Establishing rule areas that define specific route rules for different portions of the board.
    • Routing using both manual/interactive and automatic tools.
    • Working with different via structures.
    • Generating plane data.

    Skill Code: 624-Electronic Packaging Design
     
    Job Location: El Segundo, CA
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 months
    Start Date: Asap
    Input Date: 01/02/2019
    Last Updated: 05/09/2019
    Firm Name: ICONMA LLC
    Attention: Mohamed Zoheb
    Address: 850 STEPHENSON HWY STE 612
    City, State: TROY, MI 48083
    Phone: 248/602-3856
    Website: iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Electronics Technician TX

    Description:
    165027
    1592-1 Electronics Technician
    Work Location: Fort Worth, TX
    Status: Open

    Qty: 3
    Desired Start Date: 5/27/2019
    End Date: 4/17/2020

    Job Description:
    Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility. Some climbing on ladders may be required as well as lifting up to 25 lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors. An AA in Electrical or Electronics Engineering is highly preferred.

    Level: Level 2: 3+ YRS
    Pay Rate: $33.16 Hourly

    Areas of Expertise Electrical Troubleshooting Yes 1 2 - 4 Years
    Areas of Expertise Wiring Harness Design No 1 2 - 4 Years
    Technical Skills Electrical Diagnosis/Repair Yes 1 2 - 4 Years
    Technical Skills Knowledge of Basic Mechanical/Electrical Concepts Yes 1 2 - 4 Years
    Technical Skills Read Electrical Schematics Yes 1 2 - 4 Years
    Technical Skills Wire Harness Print Reading No 1 2 - 4 Years
     
    Job Number: JE-1592-1
    Job Location: Fort Worth, TX
    Rate: 33/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 05/28/2019
    Last Updated: 06/05/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    Electrophysics Engineer Scientist 5

    Description:
    Chipton-Ross is seeking 5 Electrophysics Engineer/Scientist for an opportunity located in Oklahoma City, OK

    RESPONSIBILITIES:
    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Client and FAA EME requirements and to provide engineering and technical decisions for Client Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    oReviewing supplier and partner qualification data
    oNuclear Hardening analysis and test
    oEMI/C analysis and test
    oEMSEC/TEMPEST analysis and test
    oHIRF/Lightning analysis and test
    oRF Co-Site analysis
    oAntenna Coupling analysis
    oElectrical Power Quality and Load analysis
    oTest Automation for aircraft modifications.

    Other job responsibilities may include
    oDevelops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    oDevelops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    oDevelops architectures to integrate multiple systems into higher level systems and platforms.
    oLeads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    oDevelops new and improved modeling and simulation techniques.
    oLeads development and execution of critical tests to validate performance of designs to requirements.
    oManages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    oProvides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    oSupports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    oCreates new tools to improve management of projects.
    oLeads development of major sections of large-scale proposals to support development of new business.
    oWorks under consultative mentorship.

    Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

    EDUCATION:
    Accredited Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects

    WORK HOURS:
    Full-Time/First Shift
    7:30 AM - 4:30 PM

    MISCELLANEOUS:
    Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

     
    Job Number: 177790
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 MONTHS
    Input Date: 03/11/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: mmullins@chiptonross.com
    Website: www.chiptonross.com

    Electrophysics Engineer/Scientist

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:

    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate complex systems and components into higher level systems and platforms.
    • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements.
    • Defines and conducts critical tests of various kinds to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Generates major sections of proposals to support development of new business.
    • Works under minimal mentorship.

    Prerequisites:
    • Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.
    • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
    • Must possess good organizational, interpersonal, and problem solving skills.
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
    • Ability to adjust priorities to multiple demands and unanticipated events.
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing.

    Preferred Qualifications:

    • Active U.S. Security Clearance.
    • Previous experience in the defense or aerospace industry.
    • Previous experience in Electrical Effects.

     
    Job Number: 1910099420
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/11/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: DJ Englert
    Address: 3130 S HARBOR BLVD STE 100
    City, State: SANTA ANA, CA 92704
    Phone: 714/540-7900
    800 Phone: 800/234-8644
    Fax Phone: 714/540-8092
    Email: cecjcostamesa@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWYeQAM&URLSource=cjhunter

    Electrophysics Engineer/Scientist - Secret

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:

    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Prerequisites:
    • Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience.
    • Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.
    • This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship.
    • Must possess good organizational, interpersonal, and problem solving skills.
    • Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments.
    • Ability to adjust priorities to multiple demands and unanticipated events.
    • Highly motivated and must work well in a team environment.
    • The ability to communicate effectively, both verbally and in writing.

    Preferred Qualifications:

    • Active U.S. Security Clearance/TS is a plus.
    • Previous experience in the defense or aerospace industry.
    • Previous experience in Electrical Effects.

     
    Job Number: 1910099423
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/01/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWZXQA2&URLSource=cjhunter

    Electrophysics Engineer/Scientist 3

    Description:
    PDS Tech, Inc. is seeking an Electrophysics Engineer/Scientist in Oklahoma City, OK.

    Summary:
    • Reviewing supplier and partner qualification data.
    • Nuclear Hardening analysis and test.
    • EMI/C analysis and test.
    • EMSEC/TEMPEST analysis and test.
    • HIRF/Lightning analysis and test.
    • RF Co-Site analysis.
    • Antenna Coupling analysis.
    • Electrical Power Quality and Load analysis.
    • Test Automation for aircraft modifications.

    Other job responsibilities may include:

    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Prerequisites:
    • Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
    • ABET is the preferred, although not required, accreditation standard.

     
    Job Number: 1910099417
    Job Location: OK City, OK
    Duration: 6 months
    Input Date: 03/01/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: John Blackmore
    Address: TIME SQUARE 660 BUILDING
    660 SW 39TH ST STE 215

    City, State: RENTON, WA 98057
    Phone: 206/763-2840
    800 Phone: 800/678-8644
    Fax Phone: 206/763-3283
    Email: cecjseattle@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jWYKQA2&URLSource=cjhunter

    Electrophysics Engineer/Scientist 4

    Description:
    Chipton-Ross is seeking 5 Electrophysics Engineer/Scientist 4 located in Oklahoma City, OK.

    RESPONSIBILITIES:
    The candidate will mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to client and FAA EME requirements and to provide engineering and technical decisions for Boeing Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with reviewing supplier and partner qualification data, Nuclear Hardening analysis and test, EMI/C analysis and test, EMSEC/TEMPEST analysis and test, HIRF/Lightning analysis and test, RF Co-Site analysis, Antenna Coupling analysis, Electrical Power Quality and Load analysis, Test Automation for aircraft modifications.

    Other job responsibilities may include
    Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
    Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
    Develops architectures to integrate complex systems and components into higher level systems and platforms
    Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
    Defines and conducts critical tests of various kinds to validate performance of designs to requirements
    Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements
    Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues
    Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews
    Generates major sections of proposals to support development of new business
    Works under minimal mentorship

    REQUIRED EXPERIENCE:
    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects

    EDUCATION:
    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    WORK HOURS:
    Full-Time/First Shift
    7:30 am - 4:30 pm
     
    Job Number: 177789
    Job Location: OK City, OK
    Rate: $DOE
    Duration: 6 Months
    Input Date: 03/11/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Christophor Long
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: clong@chiptonross.com
    Website: www.chiptonross.com

    Electrophysics Engineer/Scientist 4 - Electromagnetic Compatibility

    Description:
    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with
    • Reviewing supplier and partner qualification data
    • Nuclear Hardening analysis and test
    • EMI/C analysis and test
    • EMSEC/TEMPEST analysis and test
    • HIRF/Lightning analysis and test
    • RF Co-Site analysis
    • Antenna Coupling analysis
    • Electrical Power Quality and Load analysis
    • Test Automation for aircraft modifications.

    Other job responsibilities may include
    • Develops and validates requirements for various complex communication, sensor, electronic warfare and other electromagnetic systems and components
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures
    • Develops architectures to integrate complex systems and components into higher level systems and platforms
    • Performs complicated trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around established requirements
    • Defines and conducts critical tests of various kinds to validate performance of designs to requirements
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements
    • Provides support to products throughout their lifecycle from manufacturing to customer use by providing guidance and support to resolve complex issues
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews
    • Generates major sections of proposals to support development of new business
    • Works under minimal mentorship

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Basic Qualifications (Required Skills and Experience)
    Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects
     
    Job Number: 373971
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 06/15/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    Electrophysics Engineer/Scientist 5 - Electromagnetic Compatibility

    Description:
    **Secret Clearance Required to Start**

    OKC Electromagnetic Effects Group is seeking senior electromagnetic effects engineer. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Commercial Airplanes (737, 767, 787 and 777) diverse projects. Main area of focus will be to review supplier and partner qualification data to ensure compliance to Company and FAA EME requirements and to provide engineering and technical decisions for Company Military Aircraft, Military Derivative Aircraft and Rotorcraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, E-6, AC-130U, B-1B, B-2, B-52, V-22, and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft electromagnetics effect on the various platforms.

    Assignments may deal with
    • Reviewing supplier and partner qualification data
    • Nuclear Hardening analysis and test
    • EMI/C analysis and test
    • EMSEC/TEMPEST analysis and test
    • HIRF/Lightning analysis and test
    • RF Co-Site analysis
    • Antenna Coupling analysis
    • Electrical Power Quality and Load analysis
    • Test Automation for aircraft modifications.

    Other job responsibilities may include
    • Develops and validates requirements for unique communication, sensor, electronic warfare and other electromagnetic systems and components.
    • Develops and validates electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures.
    • Develops architectures to integrate multiple systems into higher level systems and platforms.
    • Leads development of trade studies, modeling, simulation and other forms of analysis to predict component, interconnects and system performance and to optimize design around complex requirements.
    • Develops new and improved modeling and simulation techniques.
    • Leads development and execution of critical tests to validate performance of designs to requirements.
    • Manages appropriate aspects of critical supplier and partner performance to ensure compliance to requirements.
    • Provides support to products throughout their lifecycle by providing guidance and support to resolve complex issues.
    • Supports project management by providing coordinating development of work statement, budget, schedule and other required inputs and conducting appropriate reviews.
    • Creates new tools to improve management of projects.
    • Leads development of major sections of large-scale proposals to support development of new business.
    • Works under consultative mentorship.

    Company is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.
    Basic Qualifications (Required Skills and Experience)
    Degree and typical experience in engineering classification: Bachelor's 14 or more years' experience, Master's with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

    This position requires an active (or ability to obtain) U.S. Security Clearance, for which the US Government requires US Citizenship

    Must possess good organizational, interpersonal, and problem solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

    Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

    Preferred Qualifications
    Active U.S. Security Clearance/TS is a plus
    Previous experience in the defense or aerospace industry
    Previous experience in Electrical Effects
     
    Job Number: 373972
    Job Location: OK City, OK
    Rate: TBD
    Duration: 6 - months
    Start Date: ASAP
    Input Date: 03/11/2019
    Last Updated: 06/15/2019
    Firm Name: CTS INTERNATIONAL
    Address: 11100 NE 8TH ST STE 800
    City, State: BELLEVUE, WA 98004
    Phone: 425/451-0051
    Fax Phone: 425/635-7630
    Email: cjhunter@ctsinternational.com
    Website: www.ctsinternational.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Embedded Software Engineer

    Description:
    Embedded Software Engineer for the development of aircraft AC and DC power distribution subsystems and for the integration of power switching devices and smart electronic power controllers. The engineer will perform software development according to RTCA/DO-178 process. The engineer will work together with hardware designers to test and verify the design during the development to qualify and certify of the product for aerospace applications.


    Primary Responsibilities
    Review and validate customer’s requirements.
    Able to decompose system level requirements into subsystem and component level requirements.
    Develop Software Development Plan per RTCA/DO-178 requirement
    Participate in Formal Reviews
    Design, develop, code, test and debug integrated hardware and software systems.
    Conduct code reviews and apply best practices and adhere to Company coding standards
    Document design data, test data and analytic results.
    Develop verification test plan and perform verification testing.
    Define communication protocol for MIL-STD-1553, CAN, ARINC-485 and other data bus.
    Develop automation testing systems for power products for manufacturing testing.
    Coordinate testing activities on assigned projects in a multi-disciplinary team.
    Coordinate product transition from engineering to operations.
    Familiar with Aerospace and Defense Development Processes.
    Provide post production support
    Perform other duties as required.
    Actively participates in Lean and 6-S initiatives.
    Maintain the highest ethical standards, even when challenged from above.


    Required Qualifications
    A Bachelor’s Degree from a four-year college or University in Computer/Software/Electrical Engineer discipline required.
    Minimum 5 year of experience with embedded C software programming activities within the aerospace environment.
    Experience with RTCA/DO-178 development process at Level A or B.
    Experience with Hardware & Software Integration Testing.
    Experience with LabVIEW design and national instrument equipment.
    Experience with capturing requirement and designs using DOORS.
    Experience with development in multi-disciplinary team.
    Excellent written and verbal communication skill.
    Must be well organized, detail oriented and have the ability to multi-task.

    Preferred Qualifications
    Master of Science Degree in Software/Computer Engineering
    Experience with embedded design based on ARM Cortex-M3/M4 and 8051 microcontrollers.
    Experience with CAN, MIL-STD-1553, ARINC-485, SPI, I2C, UART, and Ethernet.
    Familiar with Power MOSFETs and electro-mechanical technologies.
    Experience with scripting languages (i.e. Python, Batch File)
    Familiar in handling high power testing and instrumentations, 270 VDC and 115 VAC.
    Familiar with aerospace industry standards.
    Team player
    Pragmatic thinker able to prioritize and mitigate risks
    Capable of challenging technical elements of the customer's specification


    Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
     
    Job Number: 56001
    Job Location: Buena Park, CA
    Rate: Open
    Duration: Permanent
    Start Date: ASAP
    Input Date: 05/10/2019
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Rich Nguyen
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    Engineer Manufacture Design Contract Labor 4 / NX 8.5 or later required with PMI knowledge FL

    Description:
    164950/1764
    Engineer Manufacture Design Contract Labor 4 (Job Number: 19009827)

    Number of Openings: 3

    Location(s): United States-Florida-Melbourne


    Shift: 1st Shift

    Target Start Date: Jun 17, 2019

    Target End Date: Dec 20, 2019

    Pay Rate: $55/hr

    Work Schedule: 9/80

    Duration of Assignment: 12-20-19

    3 Openings

    Client is seeking experienced Aircraft Structural Designers.

    Candidates should have design experience with a focus on metallic structure, wing structure design, machined part design, sheet metal and knowledge of GD&T. Familiarity with military and industry standards pertaining to material, processes and hardware.

    NX 8.5 or later required with PMI knowledge a must.

    Candidate should be familiar with drawing/PDP release process utilizing Teamcenter.

    (Siemens) Teamcenter Enterprise / Teamcenter Unified familiarity a plus.



    Qualifications


    Basic Qualifications:

    Bachelor of Science degree in STEM discipline.

    9 years minimum aircraft metallic structural design experience.

    CAD Experience using Siemens NX 8.5 or later.


    Preferred Qualifications:

    Bachelor of Science in Mechanical or Aeronautical/Aerospace Engineering.

    Prior experience with Northrop Grumman products. (E-2, JSTARS etc.)

    (Siemens) Teamcenter Enterprise / Teamcenter Unified or similar PLM software.

    Design of aircraft wing structure.

    Familiarity with Design Review Process.

    Microsoft Office Suite.

    Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously.
     
    Job Number: JK-1764
    Job Location: Melbourne, FL
    Rate: 55/hr max
    Per Diem: no
    Duration: 6 months
    Input Date: 06/12/2019
    Last Updated: 06/13/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Engineer Mechanical (Composite Aircraft Design) 3- Secret

    Description:
    PDS Tech Inc. is seeking a Mechanical Engineer- Secret Clearance, in Melbourne FL.
    Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).
    Summary:
    • Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft. 
    • Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines. 
    • Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.  
    • Candidate may participate in on-site support at product manufacturing and integration sites. 

    Please send your resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890. 
    Prerequisites:
    • 5+ years of experience in aircraft mechanical design (will consider years of experience/education in lieu of degree).
    • Experience designing composite aircraft primary structure.
    • Proficiency with NX solid modeling software.
    • Proficiency with TeamCenter PLM software.
    • The ability to obtain and maintain access to Special Programs.

     Preferred Qualifications:

    • Bachelor of Science degree in STEM.
    • Proficiency with FiberSim composite definition software.

     
    Job Number: 1810089266
    Job Location: Melbourne, FL
    Duration: 12 months
    Input Date: 08/23/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisa Petersen
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgGsAAI&URLSource=cjhunter

    Engineer Mechanical (Composite Aircraft Design) 4 - Secret

    Description:
    PDS Tech Inc. is seeking a Mechanical Engineer -4 Secret Clearance, in Melbourne, FL.
    Active DoD Secret Clearance is required to start. Secret Clearance must have been established or reviewed within the last 6 years. Offer is contingent upon the ability to obtain access to Special Programs (SAP).
    Summary:
    • Candidate will be responsible for structural design of primary and secondary composite and metallic aircraft structural parts and assemblies for both new and existing aircraft.
    • Candidate will work within an Integrated Product Team (IPT) environment, interfacing with IPT leadership, suppliers, customers, and other technical disciplines.
    • Proficiency with the NX-TeamCenter tool suite and the ability to independently prepare and lead the preparation of product build packages is essential.  
    • Candidate may participate in on-site support at product manufacturing and integration sites. 

    Please send your resume to Elisa Petersen at epetersen@pdstech.com or call 316-448-0890
    Basic Qualifications:
    • 9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD. (Will consider years of experience/education in lieu of degree).
    • Experience designing composite aircraft primary structure.
    • Proficiency with NX solid modeling software.
    • Proficiency with TeamCenter PLM software.

    Preferred Qualifications:

    • Bachelor of Science degree in STEM.
    • Proficiency with FiberSim composite definition software.

     
    Job Number: 1810089265
    Job Location: Melbourne, FL
    Duration: 12 months
    Input Date: 08/23/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Elisa Petersen
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mgGnAAI&URLSource=cjhunter

    Engineer Mechanical 4 / NX - Clearance FL

    Description:
    164948/1765
    Engineer Mechanical 4 (Job Number: 19012383)

    Number of Openings: 1

    Location(s): United States-Florida-Melbourne


    Shift: 1st Shift

    Target Start Date: Jul 15, 2019

    Target End Date: Jul 10, 2020

    Pay Rate: $60 to $66/hr (Based on experience)

    Work Schedule: 9/80

    Duration of Assignment: Up to 1 year

    Under Supervisory direction, design and develop wiring harness/cable assembly installations into air vehicles for multiple aerospace programs using SAE AS 50881 and proven commercial practices as a guide.


    This position will require inter-departmental coordination with other vehicle sub-system departments including aircraft structure, equipment installation, hydraulics, Environmental Control Systems, and manufacturing teams.


    Basic Qualifications: Bachelor Degree plus 9 years of experience or High School Diploma plus 17 years of experience in lieu of a Bachelor Degree. Experience with NX 3D tool and 2D drawing creation based on 3D models


    Preferred Qualifications: Experience with wiring routing in a 3D tool
     
    Job Number: JK-1765S
    Job Location: Melbourne, FL
    Rate: 60-66/hr max
    Per Diem: no
    Duration: 12 months
    Input Date: 06/12/2019
    Last Updated: 06/13/2019
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Email: jeana@midcom.com
    Website: www.midcom.com

    Engineer Structural - Secret

    Description:
    PDS Tech Inc. is seeking a Engineer Structural, in Melbourne, FL.

    Summary:
    • Perform static, dynamic, and DaDT structural analyses of composite and metallic airframe structure, mechanical systems, and equipment, by hand and by using the automated methods and procedures approved for the program.
    • Ensure that designs meet program requirements and are the lightest, lowest cost, and highest quality products consistent with schedule and budget objectives.
    • The analyst may also be expected to derive non-flight applied loads, create, extract and distribute internal loads, and perform weight and stiffness optimization.
    • Tools utilized may include FEMAP, NX, and other software applications.

    Active DoD Secret Security Clearance is required to start.

    Basic Qualifications:
    • 5 Years with Bachelors in Science; 3 Years with Masters; 0 Years with PhD.


    Preferred Qualifications:

    • Knowledge of FEMAP and NX CAE.
    • Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.
    • Candidate must be able to collaborate in a team environment, prioritize and adjust tasks to accomplish the project result, prioritize multiple responsibilities and/or accomplishing them simultaneously, and comprehend and analyze complex problems and develop solutions.

     
    Job Number: 1810092306
    Job Location: Melbourne, FL
    Duration: 8 months
    Input Date: 09/21/2018
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Mary Ann McCarthy
    Address: 1215 FERN RIDGE PKWY STE 231
    City, State: ST LOUIS, MO 63141
    Phone: 314/628-9143
    800 Phone: 800/472-3737
    Fax Phone: 314/628-9485
    Email: cecjstlouis@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002f2wBAAQ&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Designer IV

    Description:
    Location: Canoga Park, CA
    Rate: $65.00 - $75.00/HR
    Duration: 1 year contract
    Shift: 9/80 Schedule (OT Possible)
    Per Diem Split: Yes (if eligible)

    **Candidates must be U.S. Citizens**
    **Permanent residents are NOT eligible for this role**
    **Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable**

    **Candidates should have experience specifically with flight electronics packaging for space applications**
    **Candidates should have design experience of electro-mechanical packaging or cable harnesses**

    Duties:
    - Support the design and development of electronics hardware, working closely with Electrical Engineers, Printed Wiring Board (PWB) designers, electrical systems, manufacturing, thermal and stress analysts. Position will support various different Electric Propulsion programs
    - Candidates should have experience specifically with flight electronics packaging for space applications
    - Candidates should have design experience of electro-mechanical packaging or cable harnesses
    - Perform engineering design tasks related to space electronics based products.
    - Duties include electronics packaging of complex space electronics, defining electrical-mechanical interface, capture design in CREO and to fully participation in team-development environment.

    Skills:
    - Proficiency in the use of CREO PDM/Link, Windchill and Pro/Cabling application.
    - Proficiency in generating drawings is required.
    - Familiarity with aerospace/defense engineering design and production processes and disciplines.
    - Experience in Electronic Packaging Design, Drawing Generation, GD&T, Tolerance Stack-up analysis.
    - Extensive experience in PRO-E/CREO CAD design are a must (NX CAD design preferred).
    - Advanced oral and written communication skills expected which will be used to coordinate and collaborate with local Operations, as well as distant-located Engineering organizations and customers.
    - Able to create, read and understand engineering drawings, electrical schematics and wiring diagrams.

    Education:
    - Requires a Bachelor's degree in Mechanical Engineering and 10 years of direct experience with packaging power electronics.
    - Willing to accept experience in lieu of Bachelor's Degree.
     
    Job Number: 10655
    Job Location: Canoga Park, CA
    Rate: $65.00 - $75.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Input Date: 03/20/2019
    Last Updated: 05/29/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Engineering Technician

    Description:
    Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

    Engineering Technician
    (US Citizenship Required*)
    Taunton, MA
    2019-8786

    Responsibilities:
    • Support engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electro mechanical systems, experimental design circuitry, laser/light transmission devices or specialized test equipment
    • May provide direction to other employees with similar duties
    • Perform a variety of equipment/process operations involving an application or technical skills in a specific area (electrical, software, manufacturing, optical, etc.)
    • Perform research and engineering laboratory functions that may include but not be limited to:
    o Layout, building, testing, troubleshooting, repairing and modification or electronic or electro-mechanical devices, assemblies, subsystems, and systems
    • Construct, troubleshoot, calibrate, adjust, test, diagnose, and maintain equipment, components, devices, or systems
    • Calibration and alignment checks; makes adjustments, modifications, and replacements as directed
    • Prepare prescribed compounds and solutions
    • Construct, modify, debug, test and adjust a variety of tools and equipment given appropriate drawings, parts and instructions
    • Implement basic practical solutions for process improvement
    • Conduct and document experiments under guidance of senior technician
    • Construct basis tooling and fixtures to accomplish unique tasks
    • Organize data to identify cause/effect relationships and recommends resolution/process improvement
    • Perform routine/basic preventative maintenance tasks
    • Work from schematics, engineering drawings and written or verbal instructions
    • Operate related equipment; conducts tests and reports data in prescribed format
    • Work under close supervision

    Qualifications:
    • Able to obtain a Security Clearance if required.
    • May require 1st Class FCC License
    • May require Solder Repair Certification
    • General knowledge of the job
    • General understanding of general job aspects and some understanding of the detailed aspects of the job
    • General knowledge of generally accepted technical theory in appropriate discipline (software, electrical, manufacturing, etc.)
    • Contacts are primarily within immediate work unit
    • Able to acquire job skills and learn company policies and procedures to complete routine tasks
    • General knowledge and proficiency in the use of related tools and equipment
    • Able to demonstrate soldering skills to pass J-std cert. if required
    • Able to fabricate simple hardware as required
    • General computer and test equipment knowledge
    *US Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • High School Diploma or equivalent including vocational training is required combined with a minimum of 1 year of relevant experience.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.


    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2019-8786
    Job Location: Taunton, MA
    Input Date: 05/10/2019
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Emmalyn Merrill
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    Engineering Technician - Intermediate

    Description:

    This position will implement the site’s robust maintenance program.
    This program will include preventative maintenance,
    real time troubleshooting/debugging and continuous improvement.

    Key Responsibilities:
    • Perform scheduled maintenance on a wide variety of automation equipment
    including but not limited to: conveyor systems, item counting machines, pumps,
    valves, environmental control systems and other PLC controlled automation systems
    • Work with growers and functional teams to diagnose and troubleshoot
    issues arising from daily operation of automated material handling systems
    • Interact with computerized maintenance management systems (CMMS)
    to document maintenance events
    • Collaborate with a team of engineers, biologists, scientists and more to deploy new automation
    systems and provide continuous improvement to existing designs
     


     



    Required Skills/Experience:
    • Associates degree or certified training in automation/engineering related field
    • High degree of mechanical aptitude, and general knowledge of equipment reliability & maintenance
    • 2-5 years of hands on experience troubleshooting automation systems with a holistic approach including
    o Mechanical system adjustment
    o Electrical diagnostics
    o Software/HMI manipulation
    • Familiarity with Microsoft Office suite of tools

    Desired Skills/Experience:
    • Conveying equipment or packaging system experience
    • Basic familiarity with agriculture or horticulture
    • Experience with CMMS
    • Experience with 3D printing and/or 3D modeling


     
    Job Number: 1910101591
    Job Location: Tucson, AZ
    Duration: 12 months
    Input Date: 05/02/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Amy Kloeppinger
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033fR7QAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Entry Level Mechanical Manufacturing Engineer

    Description:
    This position will be responsible for determining Mechanical Manufacturing methods for (SLS) hardware and ensuring that the processes are available.

    The Candidate will: •create manufacturing assembly documentation and concept tools and provide technical assistance, in order to assemble high quality, high engineered hardware for us in space applications.
    •ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
    •be able to perform cost estimates, work to schedules, and write procedures and policies.
    •be able to review drawings and concepts and resolve producibility concerns.
    •provide technical support to the manufacturing facility as well as to the external suppliers.
    •support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives.
    •be able work well in an integrated product development/ design environment.
    •present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects.
    •possess a positive attitude and be able communicate well with staff, IPD teams & management.

    The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

    Education / Certifications •Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

    Experience/Qualifications •Candidate must have 0-2 years of experience working on the manufacture of complex mechanical systems.
    •Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of Publishing Software.

    Desired experience •working on the manufacturing of components such as heat exchangers, pumps, fans, & accumulators.
    •Familiarity with a modeling and/or design package such as ProE, Creo, or CAD
    •Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing
    •Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools
    •Experience with an MRP (Manufacturing Resource Planning) system
     
    Job Number: 1910099444
    Job Location: Windsor Locks, CT
    Overtime: possible
    Duration: 1 year
    Start Date: ASAP
    Input Date: 05/02/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Stephanie Spolzino
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Website: www.pdstech.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Equipment & Furnishing Engineer (TSII)

    Description:
    Position Purpose:
    Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

    Unique Skills:
    The ideal candidate for the Mechanical Systems Engineer (TS II) opening at Gulfstream should have the following experience but not required:
    • Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear. Prior Gulfstream experience is desired.
    • Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
    • Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
    • 14 CFR Part 25 A/C Cert familiarity
    • Mechanical Systems Engineering experience required. ARP4754A experience desired
    • Catia V5, Smarteam Database, Surfacing and Kinematics Highly Desired.

    Education and Experience Requirements:
    • Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    • 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    • Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Principle Duties and Responsibilities:
    • Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    • Is consulted extensively by associates and others as a recognized authority within the field
    • Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    • Approach to problem solving balances technical product, cost and schedule
    • Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    • Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
    • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
    • Perform other duties as assigned.

    Other Requirements:
    • Advanced degree in engineering, or related curriculum preferred.
    • The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 24-345
    Job Location: Savannah, GA
    Rate: $63/hr
    Per Diem: YES
    Overtime: YES
    Duration: 1 YR+
    Start Date: ASAP
    Input Date: 04/02/2019
    Last Updated: 05/31/2019
    Firm Name: PRECISION PERSONNEL INC
    Attention: Brandon
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Equipment & Furnishings Engineer

    Description:
    Location: Savannah, GA
    Rate: $63.00/HR
    Duration: Long Term Contract
    Overtime: Possible (x1.5)
    Per Diem Split: Yes (if eligible)

    ****MUST be a U.S. Citizen or Permanent Resident****

    The ideal candidate for the position should have the following experience but not required:
    - Prior experience in Mechanized systems such as Doors, Equipment and Furnishings, Flight Control or Landing Gear.
    - Prior company experience is desired.
    - Must have experience with Catia V5, Smarteam Database, Surfacing & Kinematics is highly desired.
    - Past experience with Secondary Structure and Machined parts with Model Base Definition and GD&T proficient.
    - 14 CFR Part 25 A/C Cert familiarity
    - Mechanical Systems Engineering experience required.
    - ARP4754A experience desired

    Education and Experience Requirements:
    - Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
    - 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
    - Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

    Position Purpose:
    - Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

    Principle Duties and Responsibilities:
    Essential Functions:
    1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
    2. Is consulted extensively by associates and others as a recognized authority within the field
    3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
    4. Approach to problem solving balances technical product, cost and schedule
    5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
    6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

    Additional Functions:
    1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

    Other Requirements:
    1. Advanced degree in engineering, or related curriculum preferred.
    2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
     
    Job Number: 10701
    Job Location: Savannah, GA
    Rate: $63.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Input Date: 03/26/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    FAA Electronic Technician 2

    Description:
    PDS Tech is hiring FAA Electronics Technicians in Olathe, KS.
    In your role you will:

    • Construct, maintain, and test electrical systems and components.
    • MUST be able to test & troubleshoot down to the component level.
    • ABLE TO READ SCHEMATICS - To diagose and repair circuitry - Preferred
    • Use measuring and diagnostic tools to test and modify electronic parts.
    • Ensure systems and components meet established specifications.
    • Familiar with a variety of the field's concepts, practices, and procedures.
    • Relies on experience and judgment to plan and accomplish goals.
    • Performs a variety of complicated tasks.
    • A wide degree of creativity and latitude is expected.
    • Typically reports to a supervisor or manager.

    As our ideal candidate, you will meet the following requirements:
    • Requires a high school diploma or its equivalent.
    • May be required to complete an apprenticeship and/or formal training in area of specialty.
    • May require 2-4 years of experience in the field or in a related area.
    • Soldering background/experience is a PLUS
    • Troubleshooting Electronics to component level PREFERRED experience.
    • MUST HAVE ELECTRONICS BACKGROUND. 
    • Background in avionics electronics and mechanical background is very beneficial.
    • Must be a U.S. citizen.
    • LOOKING FOR CANDIDATES WHO ARE ABLE TO WORK 1st OR 2nd shift.
    • CANDIDATE SHOULD BE LOCAL OR MOVING TO THE OLATHE, KS AREA.
    • IN-PERSON INTERVIEWS ARE REQUIRED FOR THESE POSITIONS.

    Please send your resume to mmarquez@pdstech.com today!
     
    Job Number: 1910098974
    Job Location: Olathe, KS
    Duration: 6 months
    Input Date: 02/26/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Marjorie Santiago-Marquez
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002jUa8QAE&URLSource=cjhunter

    Facilities Engineer

    Description:
    Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Duration: 1 year contract
    Shift: 9/80 Schedule
    Per Diem Split: Yes (if eligible)

    ** Candidates must be U.S. Citizens **
    ** Permanent residents are NOT eligible for this role **
    ** Dual citizens are NOT eligible for this role **

    Job Description:
    - Facilities Engineering & Planning, at our clients Los Angeles Site, is looking to hire a Facilities Project Engineer with experience in managing projects for Manufacturing & Process equipment installations and Facility modifications.
    - The responsibilities of this position include internal customer interface, external contractor interface, and leading Project Teams on a variety of Facilities Projects (such as purchase and installation of machinery & equipment, facilities upgrades & renovations, moves & rearrangements of office, lab and manufacturing functions, and other support).

    Primarily, these responsibilities include:
    - Developing and maintaining project scope, schedule, cost, AutoCAD layouts, and project specifications (20%);
    - Generating and reviewing/approving work authorizations and invoices for payment (10%);
    - Coordinating with Safety, Health & Environment (SH&E), Maintenance, Supply Management, Finance, and others for the successful planning, implementation, and completion of assigned projects (40%);
    - Oversight of service and construction contractors (30%)

    Skills:
    - High level of Safety and Customer focus.
    - Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
    - Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
    - Knowledge of local Building codes and AutoCAD preferred.

    Education:
    - BA/BS degree in Industrial, Mechanical, Electrical, Civil, Structural Engineering or Architecture and 9+ years related experience.
    - High level of Safety and Customer focus.
    - Strong skills in leadership, teamwork, and ability to communicate effectively with all levels of management, customer personnel, outside agencies, suppliers and others.
    - Proficient in Microsoft Word, Excel, Power Point, Project, Access & Oracle Databases.
    - Knowledge of local Building codes and AutoCAD preferred.
     
    Job Number: 10764
    Job Location: Canoga Park, CA
    Rate: $50.00 - $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 1 yr
    Start Date: ASAP
    Input Date: 06/04/2019
    Last Updated: 06/07/2019
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Email: patrick@inconen.com
    Website: www.inconen.com

    Facilities Maintenance Technician

    Description:
    PDS Tech is currently recruiting for a Facilities Maintenance Technician in Chandler, AZ.  

    Job Description:

     
    • Simple maintenance tasks.
    • Performs housekeeping in all areas of the plant.
    • Maintain, service and install all refrigeration, heating, ventilation and air conditioning units (HVAC).
    • Dismantles, cleans, repairs, replaces assembles, adjusts and maintains all mechanical and      hydraulic equipment.
    • Adjusts equipment to obtain proper operation characteristics.  Lubricates equipment as required.
    • Sets up, changes and adjusts equipment as required by current operations

    Responds to emergency calls, inspects and troubleshoots defective equipment to determine work to be done.

    • Operates simple machine tools such as drill press, pipe threading machine, saw.  Cuts material with oxy-acetylene torch.
    • Able to perform a variety of manual tasks for extended periods of time in unfavorable weather conditions.
    • May perform maintenance skills for construction and facilities repair.
    • Completes work as assigned on Maintenance work orders, Fills out PM check sheets.

     
    Qualification:

    • High school diploma required
    • 4+ years of maintenance experience; 5 years experience as a Millright/Maint Technician, preferably with a DOD contractor. 
    • Should be trained an experienced in:  Electrical; HVAC universal EPA Card. Welding; Rigging Machinery Installation; Machine Repair; Piping Systems and Installation. 
    • Knowledge of basic methods and techniques of general construction and equipment repair. 

    • High school diploma required
    • 4+ years of maintenance experience; 5 years experience as a Millright/Maint Technician, preferably with a DOD contractor. 
    • Should be trained an experienced in:  Electrical; HVAC universal EPA Card. Welding; Rigging Machinery Installation; Machine Repair; Piping Systems and Installation. 
    • Knowledge of basic methods and techniques of general construction and equipment repair. 

     
    Job Number: 1910101270
    Job Location: Chandler, AZ
    Duration: 0 months
    Input Date: 04/17/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Pam Zack
    Address: 300 E JOHN CARPENTER FWY STE 700
    City, State: IRVING, TX 75062
    Phone: 214/647-9600
    800 Phone: 800/270-4737
    Fax Phone: 214/647-9630
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033eDXQAY&URLSource=cjhunter

    Facilities Plant Engineer - Top Secret

    Description:
    PDS Tech, Inc. is seeking a Facilities Plant Engineer in Chantilly, VA. 

    Summary:

    • Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds.
    • Reviews architectural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
    • Communicates problems and issues to others for resolution.
    • Integrates the activities of multiple engineering disciplines, outside consultants and government agencies.
    • Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds.
    • Reviews civil/structural designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
    • Communicates problems and issues to others for resolution.
    • Develops moderately complex conceptual analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.).
    • Facilitates the implementation of moderately complex improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs.
    • Communicates problems and issues to others for resolution.
    • Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds.
    • Reviews electrical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
    • Integrates the activities of multiple engineering disciplines, outside consultants and government agencies.
    • Develops moderately complex conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds.
    • Reviews mechanical designs to assess compliance with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials.
    • Ensures accuracy of drawing archives/libraries by reviewing contractor redlines.
    • Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements.
    • Manages or supports construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance.
    • Prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.
    • Produces or procures detailed design documents.
    • Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters.
    • Coordinates designs.
    • Reviews and approves documents.
    • Translates customer requirements into design options with documents and estimates.
    • Identifies appropriate materials, equipment, and services by applying engineering principles and methodology.
    • With limited supervision, develops and updates design standards and site-specific operating procedures in order to establish common practices.
    • Provides input to strategic, short-term, and long-term infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.
    • Translates customer requirements into conceptual design by analyzing intended use/occupancy and desired aesthetics, conducting code research, developing preliminary design elements, determining interdisciplinary engineering support requirements, estimating resource costs/requirements, identifying materials, equipment, and services, and developing initial project schedule in order to establish project scope in response to customer requirements. Plans, manages, and executes projects.
    • Leads a team of stakeholders in the acquisition and modification of assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies.
    • Manages project expenditures within authorized budgets.
    • Creates, maintains, and communicates project management information.
    • Assists in the creation of contract scope.
    • Ensures suppliers comply with all contract obligations.Interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements.
    • Offers project alternatives in order to assure compliance.
    • Provides support, as required, to secure permits.


    Prerequisites:
    • Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

     
    Job Number: 1910101073
    Job Location: Chantilly, VA
    Duration: 12 months
    Input Date: 04/09/2019
    Last Updated: 06/14/2019
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Dakota Longpine
    Address: 11828 W CENTRAL STE 100
    City, State: WICHITA, KS 67212-5129
    Phone: 316/729-1800
    800 Phone: 800/333-8644
    Fax Phone: 316/729-1857
    Email: cecjwichita@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033djuQAA&URLSource=cjhunter

    Facilities Plant Engineer 2

    Description:
    Chipton-Ross is seeking a Facilities Plant Engineer 2 for an opening in Chantilly, VA.

    RESPONSIBILITIES:
    Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Aligns architectural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Assists others to integrate the activities of multiple engineering disciplines, outside consultants and government agencies. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Aligns civil/structural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Assists others to facilitate the implementation of basic, routine improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Aligns electrical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Aligns mechanical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. With limited supervision, ensures accuracy of drawing archives/libraries by reviewing contractor redlines. Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. With limited supervision, supports or manages construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. With limited supervision, prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.With limited supervision, produces or procures detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. With limited supervision, translates customer requirements into design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Assists with updating design standards and site-specific operating procedures in order to establish common practices. With limited supervision, provides input to infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.With limited supervision, collects customer requirements. Participates in conceptual design by analyzing intended use/occupancy and desired aesthetics, code research, and the development of preliminary design elements. Participates in projects requiring interdisciplinary engineering support. Estimates resource costs/requirements, identifies materials, equipment, and services, and develops preliminary project schedule in order to establish project scope. With limited supervision, plans, manages, and executes projects or selected project elements. Acquires and modifies assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Assists in the creation of contract scope. Ensures suppliers comply with all contract obligations. With limited supervision, interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.

    EDUCATION:
    Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 3:30 PM

     
    Job Number: 178100
    Job Location: Chantilly, VA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 03/21/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Emmanuel Morgan
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: emorgan@chiptonross.com
    Website: www.chiptonross.com

    Facilities Plant Engineer 2

    Description:
    Buildings, Equipment Installations, Utility Systems, Building Codes, Regulations, Construction Principles

    RESPONSIBILITIES:
    Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the architectural phases of buildings, equipment installations, utility systems and grounds. Aligns architectural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Assists others to integrate the activities of multiple engineering disciplines, outside consultants and government agencies. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the civil/structural phases of buildings, equipment installations, utility systems and grounds. Aligns civil/structural designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine analysis to determine the cause of asset failures and reduction in asset capacity by using reliability tools and methods (e.g., life cycle analysis, condition based maintenance, root cause failure methodology, mean time between failures, fault tree analysis, etc.). Assists others to facilitate the implementation of basic, routine improvements in asset effectiveness, availability, and maintainability; to specify configuration of new assets in order to support reliability programs. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the electrical phases of buildings, equipment installations, utility systems and grounds. Aligns electrical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. Develops basic, routine conceptual designs, final designs, cost estimates and provides maintenance support for the mechanical phases of buildings, equipment installations, utility systems and grounds. Aligns mechanical designs with customer requirements, building codes and applicable regulations by applying knowledge of construction principles, practices, and materials. With limited supervision, ensures accuracy of drawing archives/libraries by reviewing contractor redlines. Identifies errors and documents construction changes to comply with regulatory requirements, facility standards, and record retention requirements. With limited supervision, supports or manages construction projects by providing input on vendor selection; reviews contractor proposals; interfaces with government/regulatory agencies; monitors project progress and vendor/consultant performance. With limited supervision, prepares and presents project information to ensure compliance with applicable construction documents and jurisdictional requirements and to meet project objectives.With limited supervision, produces or procures detailed design documents. Uses appropriate resources to produce project drawings, specifications, and permit application packages in accordance with project parameters. Coordinates designs. With limited supervision, translates customer requirements into design options with documents and estimates. Identifies appropriate materials, equipment, and services by applying engineering principles and methodology. Assists with updating design standards and site-specific operating procedures in order to establish common practices. With limited supervision, provides input to infrastructure planning; completes studies; analyzes current conditions and future requirements; recommends capital improvements; gathers and analyzes data; and works with both internal and external customers in order to identify and assess alternatives and impacts.With limited supervision, collects customer requirements. Participates in conceptual design by analyzing intended use/occupancy and desired aesthetics, code research, and the development of preliminary design elements. Participates in projects requiring interdisciplinary engineering support. Estimates resource costs/requirements, identifies materials, equipment, and services, and develops preliminary project schedule in order to establish project scope. With limited supervision, plans, manages, and executes projects or selected project elements. Acquires and modifies assets to enable the customer to achieve the defined business objectives in accordance with company and accounting policies. Manages project expenditures within authorized budgets. Creates, maintains, and communicates project management information. Assists in the creation of contract scope. Ensures suppliers comply with all contract obligations. With limited supervision, interprets and analyzes applicable regulations, standards, codes, and ordinances with respect to project requirements. Offers project alternatives in order to assure compliance. Provides support, as required, to secure permits.

    EDUCATION:
    Accredited Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

    FULL TIME/FIRST SHIFT
    WORK HOURS: 7:00 AM - 3:30 PM

     
    Job Number: 178098
    Job Location: Chantilly, VA
    Rate: $DOE
    Duration: 12 Months
    Input Date: 03/21/2019
    Last Updated: 06/16/2019
    Firm Name: CHIPTON ROSS
    Attention: Kristie Hardage
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Email: knguyen@chiptonross.com
    Website: www.chiptonross.com

    Facilities Plant Engineer 3

    De