Job Search Results

620 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 03:33AM Pacific Time by ContractJobHunter. )

Listings 1 - 620

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2438 - MISSION SYSTEMS ENGINEERING - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Candidates must possess a degree in Engineering (Systems Design, Aerospace, Electrical, Software, or Mechanical Engineering)

Must have a proven track record as a System Designer/Architect capable of conceptualizing, designing and building complex systems from initial customer requirements through to product delivery and commissioning.

Eight (8) or more years of experience of diverse product development in end-to-end deployed systems in a leadership role is required.

Experience developing and mentoring engineers and other technical staff.

The candidate must have comprehensive engineering knowledge in more than one discipline.
 
Job Number: 2438
Job Location: US Northeast, US Northeast
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24 Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2440 - ELECTRICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mission Systems engineers currently to support a number of programs across the Space Mission organization.

Electrical engineers to currently support a number of programs across the Space Mission organization.

Candidates must have a Bachelor's or Master's degree in electrical engineering.

Must be experienced utilizing electronic design tools such as ORCAD Capture, PSpice A/D including Advanced Analysis, OrCAD Signal Explorer, ISE Design Suite, ModelSim, Synplify, and Matlab/Simulink.

Proficient with laboratory equipment: power supplies, multimeters, function generators, oscilloscopes, dynamic signal analyzers, impedance analyzers, and network analyzers.

Candidates are expected to understand the basics of interfacing between hardware and software.

Experience developing and/or testing equipment for space applications.

Familiar with Actual Fusion, Xilinx V5, and arm microprocessor would be an asset.
 
Job Number: 2440
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2441 - SOFTWARE DEVELOPMENT ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Software Development engineers currently support a number of programs across the Space Mission organization.

Candidates must possess a Master's degree in Computer Science or Computing Systems Engineering.

A minimum of 4 years design and development experience with 2 years in Rovers software development, QNX and RTEMS experience and related device driver development.

Must possess experience with languages such as C, C++, Java, Matlab/Simulink and the ability to work closely with electrical engineers.

Well versed in software lifecycle, software configuration management and development process.

Design, development, implementation of Data Handling Unit and basic understanding of Avionics systems.

Experience with Pushbroom, CMOS telescopes and the following interfaces: SpaceWire, Hotlink, LVDS, UDP TCP/IP, CSSDS, RS422, CAN bus , SPI , 8051, Fusion.
 
Job Number: 2441
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2450 - QUALITY ASSURANCE ANALYST - WIRING/ELECTRICAL

Description:
Perform quality reviews, write reports, raise requests for supplier action and follow up.

Perform technical audits, onsite internal and external customer reviews as required.

Perform FAI.

Quality Assurance tasks, (Audits, TC related issues, assure compliance to the BQM, QMS

Put in place corrective actions and follow up with suppliers;

Represent QACC on New business projects and new Client programs.

And not limited to the above.

University or college level degree in the aeronautic domain, or 5 years of comparable work experience.

Must have some knowledge of the quality management system, AS9100 organizations and processes.

Have some change management skills.

Have some project management skills.

Have experience in problem resolution techniques.

Bilingual - must have good communicational and writing skills in English and French.

Have a good knowledge of Excel, and Microsoft Office.

Must be available for occasional travel.

Also considered as assets.

Must have experience in wiring or electrical (Manufacturing, Methods).

Have experience with SAP.

Have some knowledge in systems, process or product auditing.

Have experience with supplier interventions Internal and external.

Have work experience as a team leader with excellent negotiation skills.
 
Job Number: 2450
Job Location: Montreal, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2453 - STRUCTURES PRODUCTION SUPPORT - cv, word doc only

Description:
Work within a team to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in resolution of issues.

Generate engineering documents (drawings, MBD, and NIEO, modsums) to support RFC and PCR authorities.

Be involved in and part of all aspects of Structures, Systems Installations and Integration dealing with Final Line by closely working with other engineering departments, internal and external customers, and Structural partners/Suppliers.

Apply Achieving Engineering Excellence and other methodologies to implement and improve business processes, enhance customer satisfaction and meet strategic goals.

Maintaining technical knowledge and awareness of developments related to airframe structures.

Bachelor's or Master's degree in Aeronautical or Mechanical Engineering from an accredited university with minimum of 10 years of experience in airframe primary and secondary structural design including systems installations.

Have detail understanding of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications. Electrical & Systems experience would be an asset.

Have detailed understanding of airframe configuration optimization, loads, stress analysis, manufacturing processes, tooling concepts and structural in-service requirements.

Have understanding of civil aircraft certification rules and experience in certification procedures would be an asset.

Have previous CATIA V5, Design, and support to production experience. MRB experience would be considered an asset.

Have excellent communication and interpersonal skills, leadership skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.
 
Job Number: 2453
Job Location: Toronto, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2462 - AVIONICS/ELECTRICAL SYSTEMS INTEGRATION - cv, word doc only

Description:
Support the Client Aircraft Mod-line in Montreal by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests

Track and ensure successful implementation of systems installations and modifications

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes

Develop good working relationships with various departments within Clients fold and with all suppliers

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Have experience in providing engineering support to a Final Line/Production.

Have over 11 years experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Are Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Are Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration

Are familiar with Microsoft Office software tools

Have Strong communication skills, ability to work well in a multi-disciplinary team environment.

Full flexibility is expected (may be on-call, shift-work, rotational work, weekends, odd hours, etc).

Regular Shift = Afternoon Shift (3:30 to 12:00); occasionally may have to support other shifts (as required).

Occasional business trips and Frequent travel between plants in Montreal. (Will travel to Toronto, Pitfield and Air Canada Hanger in Montreal.)
 
Job Number: 2462
Job Location: Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2469 - AVIONICS/ELECTRICAL SYS. - AFTERNOON, MIDNIGHT & WEEKEND SHIFT

Description:
Provide Avionics Engineering support to the Client Final Line Assembly during afternoon, midnight and weekend shift.

Witness system functional testing and conduct technical investigations on Electrical and Avionic systems related issues, analyze and develop solutions/recommendations and reports. Disposition RFCs, RNCs, and Supplement 2s as required.

Review functional test requirements and ensure translation into mature functional tests.

Track and ensure successful implementation of systems installations and modifications.

Work with the product development team to assist with technical proposal activities, including preparation of written material and presentations. Recommend and review design changes.

Develop good working relationships with various departments within BA and with all suppliers.

Bachelor of Engineering Degree and eligibility for Professional Engineer registration.

AME license is an asset.

Experience in providing engineering support to a Final Line/ Production.

15 years' experience in aircraft electrical systems and or avionics systems (Electrical Generation, Distribution, Lighting, Navigation, Communication, Displays, EICAS, Data Concentration System, AFCS, Stall System, OMS, FDR, CVR etc).

Conversant with design, qualification and certification test requirements of Aircraft Electrical and or Avionic systems.

Have flexibility to travel.

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Regular work day, some flexibility required:

Afternoon Shift (3:30 to 12:00) ;

Midnight Shift = (11:00 PM to 6:30 AM);

Weekend Shift = Friday, Saturday, Sunday and Monday.
Friday (3:30 PM -12:00 (midnight)),
Saturday (6:00 AM to 6:00 PM),
Sunday (6:00 AM to 6:00 PM)
Monday (8:00 AM 8 to 4:30 PM)
 
Job Number: 2469
Job Location: Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Do you have experience with Catia V5 and Airframe experience? Do you have an active secret clearance and would like to put your aeronautical engineering skills to work in the Golden State known as California? Then apply today!

The ideal candidate for this position will perform the following tasks:
* Responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
* Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
* Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
* Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Mandatory Qualifications and Experience:
* Secret clearance with investigation in the past 5 years is required
* Catia V5 experience is required.
* Airframe experience is required.

Desired Qualifications and Experience:
* Experience designing composites is a plus.
* Experience with Siemens Fibersim is a plus.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 128545
Job Location: Palmdale, CA
Duration: 1 year
Start Date: 08/13/2018
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Catia V5 airframe design composites Fibersim - Clearance URGENT NEED CA

Description:
1090-1 Aeronautical Engineer / Catia V5

Work Location: Palmdale, CA
Status: Open

Qty: 10
12 months

Job Description:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Catia V5 experience is required.
Airframe experience is required.
Experience designing composites is a plus.
Experience with Siemens Fibersim is a plus.

Work Location: Palmdale, CA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $68.00 Hourly

Experience
Areas of Expertise CATIA Yes 1 4 - 6 Years
Areas of Expertise Composites and Materials No 2 2 - 4 Years
 
Job Number: JE-1090-1S5
Job Location: Palmdale, CA
Rate: 68/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Duration: 1 year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
- Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
- Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
- Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
- Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
- Establishes structural specifications, performs stress analysis, and conducts performance tests. '


Required Skills:
- Catia V5 experience is required.
- Airframe experience is required.
- Experience designing composites is a plus.
- Experience with Siemens Fibersim is a plus.

Education:
- Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 9610
Job Location: Palmdale, CA
Rate: $70.00 - $80.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

Review and support Avionics Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Coordinate with certification authorities to seek clarification on requirements.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Create, review and approve interface control documents and any sub level writing interface documents.
Support Avionics Flight Testing Activities, including but not limited to:
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Complete special projects and tasks assigned by Group Lead.



Requirements
Knowledge/Skills/Abilities

Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to in still a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Electrical Systems

Description:
Role Description

The Aerospace Engineer, Electrical Systems position located here in Moses Lake, WA is responsible for supporting for the development, testing and certification of the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, wiring, etc.). The role requires the significant exercise of independent discretion and judgment in matters of significance.



Job Duties and Responsibilities:

Review and support Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Plans.
Review qualification by similarity and/or analysis repots.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers.
Coordinate with certification authorities.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Support Flight Testing Activities, including but not limited to:
Help determine test specification definition.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to crate rejection tags.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test result reports.
Electrical Systems.
Creating instrumentation definitions for the electrical systems (locations of instrumentation, sample rates, unit definitions, etc.)
Release of engineering documentation for component changes and new installation, ensuring appropriate configuration control
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Knowledge of flight test operations and flight certification, including knowledge of electrical aspects of the various systems and components and/or controllers on the airplane.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people/
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer III

Description:
STS Technical Services is hiring Aerospace Engineer III  in Atlanta, Georgia.

 Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Responsibilities:
Responsible for electrical systems and equipment design of complex aircraft interior and entertainment system modifications
Perform research and surveys to determine the best methods to modify aircraft to accomplish project statements of work
Design new electrical parts, assemblies and installations defining aircraft modifications
Perform electrical analysis and substantiation of new parts and installations
Produce engineering drawings, reports, material lists and work instructions to document & install aircraft modifications
Provide engineering checks of data produced by peer groups or other project participants
Provide technical support during manufacturing and installation of aircraft modifications
Interface with customers, suppliers and other project stakeholders pertaining to modification projects
Provide guidance and oversight to engineering peer group, and mentor new engineers to operate within departmental practices and procedures
Provide statements of work, cost estimates, completion schedules and other project administrative inputs
Practice safety-conscious behaviors in all operational processes and procedures
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 43491
Job Location: Atlanta, GA
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrical Design Engineer - Pacific NW - Contract

Description:
Keltia Design in Everett, is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis. We have been providing these services for over 18 years.

We have a client in the Pacific NW seeking an Aircraft Electrical Design Engineer for a potentially long term assignment

JOB RESPONSIBILITIES
Applies standard engineering techniques involving innovations of methodology to provide solutions to problems involving a limited number of variables. Experience on Airbus type Aircraft preferred.

Performs low to medium complex circuit/wiring design activities including electrical load analysis and subsequently, prepares appropriate validation and verification means.

Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.

Typically focuses on existing products or processes.
Liaises with drafters, technicians, and others to contribute to project completion.

Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
· Performs other related duties as required.

MINIMUM REQUIREMENTS
Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and a minimum of 10 years related professional experience and/or training; alternatively, an equivalent combination of education and experience.

If interested please include your desired rate, availability, and your resume in a word.doc format.

Thank you
 
Job Number: KEL090918
Job Location: Pacific NW
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6mo+
Start Date: ASAP
Input Date: 09/16/2022
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Analog/Power Electrical Engineer

Description:
The Fort Wayne facility designs, builds, integrates, and tests weather and climate space instruments. These instruments contain complex analog, power, digital, and FPGA electronics. Responsibilities will include analog and power design, system architecture, root-cause failure investigating, and leading small technical teams. This position will also assist the Project Manager in creating specifications, giving technical customer presentations, and insuring schedule and budget objectives are met.



Required Experience:

" 10 years of experience with a Bachelor degree in Electrical Engineering, Electrical Engineering Technology, or Computer Engineering; or equivalent

" 10 years Analog/Power Design Experience

" 10 years Circuit Analysis Experience



Desrired Skills:

" Hands-On Root-Cause Troubleshooting Experience

" Technical Specification Generation Experience

" Schedule Experience

" Good written and verbal communication skills

" Space Electronic Design Experience

" Knowledge of analog and power design process and circuit analysis tools

" Knowledge of power supply design techniques

" Proficiency at writing requirements for electronics

" Ability to effectively communicate to all stakeholders (customers, contract management, technical personnel, business personnel)

" Ability to evaluate a problem from multiple vantage points and suggest win-win solutions " Comfortable working in a dynamic, fast paced, team oriented environment



Experience:

10 Years Minimum

Bachelor's Degree

 
Job Number: 18-32545
Job Location: Ft. Wayne, IN
Rate: 80.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-02-22 00:00:00.0
Start Date: 2018-08-20 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Paul Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Systems Engineer

Description:
Avionics Electrical Systems Engineer assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
The Avionics Engineer will be responsible for the design, development, and integration of the assigned avionic systems for the aircraft.

Previous Garmin experience is required.

Duties and Responsibilities:
1. Define, plan, and develop complex systems level requirements to support the avionic systems for the HondaJet aircraft.
2. Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
3. Interface with suppliers to ensure technical requirements are met to support aircraft development need dates.
4. Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution.
5. Perform system evaluation and analysis to verify the system design compliance with functional requirements.
6. Coordinate with cross-functional team members to complete assignments/projects as defined and on schedule.
7. Develop targeted system level enhancements to address customer feedback and product improvement initiatives.
8. Conduct system lab testing and aircraft functional testing.
9. Prepare presentations on avionics system design/development status.
10. Support system analyses for avionic systems.

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.

Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-022
Job Location: Greensboro, NC
Rate: $50 - $60
Per Diem: Yes
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Contractor (Custom Engineering)

Description:
Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Must be proficient at creating design and compliance data to support after-market installations on all company models.
• Must understand FAA/ODA/Industry requirements associated with aircraft modifications.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
• Actively works to improve daily processes and ensures all work meets customer requirements
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
 
Job Number: 24-213
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinist applies advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2. Independently perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. 3. Set up and operate necessary test equipment in accordance with required documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. 4. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required maintenance data to ensure conformity requirements are met. 5. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. 6. Demonstrate expertise and efficiency in repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. 7. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspection tools such as, but not limited to, micrometers, calipers, bore gauges, multimeters, watt meters, spectrum analyzers, and borescopes. 8. Demonstrate expertise in the flow of materials and work order processes within the repair station. 9. Maintain and utilize all required paperwork in accordance with FAA Repair Station requirements. 10. Maintain a clean and orderly work area. 11. Comply with all company and legislative environmental health and safety regulations. Must be proficient in the setup and operation of 3-5 axis CNC Mills. Must be able to setup and operate conventional mills and lathes and use related precision measuring tools to inspect machined detail components to blueprints / 3D models.


CNC Machinist Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. 2. Fabricate and repair sheet metal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. 3. Remove & install APUs and perform all required APU maintenance for all aircraft models 4. Perform repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. 5. Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. 6. Assist with training and instructing of other Acft Compo Repair I and II Techs. 7. Perform other duties as assigned.
HS diploma or GED. A&P license, FCC license, or NCATT cert preferred. Able to read/interpret blueprints, engrg docs and use/read precision measuring tools. Proficient in the operation of all tools & equip in the dept. Basic understanding of shop math. 4 yrs. experience in one of the following or other related expr: Sheetmetal, hydraulic overhaul, avionics/elect compo repair. Accredited schooling in electronics and elect sys may offset some experience reqmts. APU removal, install, service.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabin Interior Electrical Systems DER

Description:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Unique Skills:
• Requires five years of experience in executive cabin interior electrical systems design and certification required.
• Specific experience with cabin management systems, cabin entertainment systems, cabin business (communications and data) systems, and EWIS preferred.
• Document creation experience preferred.
• Current or former DER / ODA Unit Member preferred. Delegations Needed: Chart C2: A1, A2, A4, A5, A6 B1, B2, B4, B5, B6 C1, C2, C4, C5, C6, C7 H1, H2, H4, H5, H6 I1, I2, I4, I5, I6 K1, K2, K4, K5, K6

Education
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
 
Job Number: 24-271
Job Location: Savannah, FL
Rate: 135
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2

Description:
Location: Dallas (Grand Prairie, TX)
Rate: $50.00/HR
Duration: 9 month contract
Shift: 1st Shift
Per Diem Split: Yes (if eligible)

****MUST BE ABLE TO OBTAIN A SECRET CLEARANCE****
****MUST BE A U.S. CITIZEN****

Description
- Seeking an Electrical, Electronic and Electro-mechanical (EEE) Components Engineer for a position in Grand Prairie, TX.
- The EEE Components Engineer should also have a working knowledge of component selection, screening, parts qualification and derating of Electrical, Electronic, and Electromechanical components used in military applications.
- The selected Candidate should be a self-starter, capable of handling several tasks at once.
- The selected candidate must be able to work without supervision.
- Candidate must be able to interface with Government customers (both in meetings and through presentation preparation), handle document issues relating to new component releases and qualification, handle component related failures, handle component noncompliance issues, handle program prohibited items such as pure-tin and able to handle counterfeit part detection.


Skill/Experience/Education
Mandatory:
- Must have or must be able to obtain a security clearance.
- Must be proficient with computer tools such as MS Excel and Access.
- Candidate should have experience in electrical component manufacturing process and physical property analysis.
- Parts Management - Working with designers to select components for use in designs.
- Obsolescence - Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified.
- This position requires periodic travel to both the customer and supplier locations.


Desired:
- The ideal candidate is a Material Science Engineer with electrical component experience or an Electrical Engineer with 5 years or more experience in Component Engineering.
- Experience in Components Engineering with broad knowledge of electronic components and devices.
- The ideal candidate has experience working electrical components on a Production Program.
- Experience in the disposition of Q-Notes.
- Experience with parts release process, and with formal Configuration Board support.
- Experience working with Global Supply Chain, Quality and Manufacturing groups.
 
Job Number: 9445
Job Location: Grand Prairie, TX
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Avionics Installer II

Description:
Unique Skills:

Demonstrated aircraft AV/EL installation experience required.


Education and Experience Requirements:
High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


Position Purpose:

Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.

Principal Duties and Responsibilities:

Essential Functions: 1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records. 3. Completes tasks within allotted time frame. 4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. 5. Checks all work and ensures a defective free assembly prior to final inspection. 6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. 7. Maintains a neat and orderly work area.

Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. 2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.) 3. Performs other duties as assigned.

Other Requirements: 1. Strong written and verbal skills required. 2. Computer skills and general software knowledge necessary.

Languages Required (in addition to English): No Selection
 
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Avionics/Elec Tech Sr

Description:
Unique Skills:
1. Proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. APU run qualification and engine run qualification preferred. 3. Ability to read and interpret basic blueprints and schematic diagrams.

Education and Experience Requirements:
High School graduate/GED. A & P license, FCC license or NCATT certification preferred. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience.

Position Purpose:
Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements.

Principal Duties and Responsibilities:

Essential Functions: 1. Demonstrates superior technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. 2. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 3. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. 4. Demonstrates the skills and knowledge required to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. 5. Oversees the performance and compliance with engineering changes and modifications as required. 6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. 7. Demonstrates through diligent compliance the importance of daily logs and other paperwork. Ensures that all work performed on the aircraft is properly and completely documented 8. As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. 9. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. 10. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. 11. Maintains required logs and records. 12. Adapts to sudden schedule changes. 13. Coordinates with other disciplines concerning projects.

Additional Functions: 1. Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 2. Self-inspection capability for all avionics testing functions in applicable areas. 3. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. 4. Performs other duties as assigned.

Other Requirements: 1. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. 2. APU run qualification and engine run qualification preferred. 3. Ability to read and interpret basic blueprints and schematic diagrams.
 
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INTERGEN GROUP
Attention: Maggie Lloyd
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Systems Engineer - JF

Description:
As a Control System Engineer – Electronic Control Module in our Central Electrical Engineering organization you will be a pivotal member of our team; designing, developing, calibrating, and validating the software and hardware aspects of electronic controllers. This includes control algorithms, diagnostics, and communications for the controllers used across multiple product lines.
 
In most cases, the design will be at a high level, such as capability requirements, algorithms for the functionality, and you will lead a vendor or internal resources in the development of the controller component/module design.
 
Essential duties and responsibilities:
1. Works with the product team’s electrical engineers to understand and decompose system level requirements into controller hardware and software requirements.
2. Document hardware, software requirements, and validation tests using Integrity (a requirement and software development database application).
3. Interfaces with vendor as needed for component/module development, ensuring quality is met.
4. Manages on bench/vehicle control module validation of HW and SW including interfacing with technicians for execution
5. Optimizes controller design and manages re-use to serve multiple product lines and functionality requirements with the shortest design cycle times possible
6. Updates team on controller development schedule/status to clarify deliverable expectations
 
Requirements:
1. B.S. or higher in Electrical or Computer Engineering required
2. Experience with design and/or implementation of controls, especially related to vehicle controls/diagnostics/communication required
3. Experience with software and/or hardware V&V efforts including MIL/SIL/HIL, other low level software verification, and related documentation required.
4. Experience with DFMEA, SFMEA, and Functional Safety strongly desired.
5. Ability to work efficiently in a fast paced development environment required
6. Experience with motor controllers, and power electronics strongly desired.
7. Experience in effective problem solving and troubleshooting required
8. Experience with communication networks required, CAN and J1939 strongly preferred
9. Familiarity with requirement and test case management in any requirement/software development database application as well as configuration management preferred.
10. Experience in project management strongly preferred
 
Job Location: Wyoming, MN
Input Date: 11/14/2020
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Jim Fry
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Cabling Designer-TT

Description:
We are looking for an Electrical Designers that will be responsible for leading the electrical design process of related components and systems from concept to production in order to achieve the product objectives within a specified time.

RESPONSIBILITIES:
1. Establishes a reasonable project development schedule from concept to production implementation in line with overall business requirements.
2. Supports all design related component styling, purchasing and manufacturing issues with emphasis on quality, reliability, timely delivery, and cost.
3. Determines ideal electrical component placement and manufacturing route to ensure overall design, performance, and cost conformance.
4. Determines nature and type of electronic models, detail drawings, and analysis required to support the above and supervises their release through the release cycle.

equirements:
1. 5 years minimum related design experience
2. Required - extensive experience with Pro-Engineer (Creo 2.0 or 3.0)
3. Desired - extensive experience with Pro/Cabling
4. Desired – extensive experience with Routed System Designer (RSD) & Creo Schematics 2.0 or 3.0
 
Job Number: TT-Cabling
Job Location: Forest Lake, MN
Rate: 46.00/hr+
Per Diem: possible
Overtime: possible
Duration: 6-9 months
Start Date: asap
Input Date: 11/14/2020
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Tracy
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design & Analysis Engineer

Description:
Design and Analysis Engineer 3

Location: Hazelwood, MO
Duration: 6 months

Job Description:
Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a master’s degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code: 64E-Training Equipt Design - Elect

Additional Information:
Mentor Graphics skills required
 
Job Number: 18-11283
Job Location: Hazelwood, MO
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: 8/17/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design & Analysis Engineer IV - (OK)

Description:
This is a senior level position in Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their Boeing representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues
Researching new technologies for potential application to C-17
An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience. Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must. The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common sense principles in the context of organizational dynamics and real world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: DesEngOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Electrical Brackets & Installation

Description:
General Summary:
The Electrical Brackets & Installation Design Engineer is responsible for the development, planning and coordination of electrical brackets and installation designs.

Duties and Responsibilities:
1. Develops and maintains electrical brackets and installation designs.
2. Documents processes, specifications and procedures that support the design and manufacture of electrical commodities.
3. Develops statements of work, schedules and budgets.
4. Analyzes functional and physical input to assure development of complete integrated design architecture.
5. Provides specialized technical assistance to team members outside of the assigned group.
Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems.
6. Determines and develops own approach to solutions within schedule and cost objectives.
Actively works to improve daily processes and ensures all work meets customer requirements.
Maintains a current knowledge of developments in the field of specialty and/or other related
aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors' degree in Electrical Engineering, Computer Engineering or related field of study.
2. 8+ years of design engineering experience within aircraft structures is required.
3. Previous designing brackets for electrical harnesses and equipment installation is preferred.

Knowledge, Skills and Abilities:
1. Working knowledge of CATIA VS 3D solid modeling workbench or equivalent (i.e. - Solidworks, Unigraphics).
2. Familiarity with tolerance study (GD&T).
3. Proficiency in Microsoft Office Products (Word, Excel, PowerPoint) and Lotus Notes.
4. Ability to explain and present analysis and assumptions in a rational manner.
5. Ability to communicate effectively through all level throughout the organization.
6. Ability to work independently or within a team oriented environment.


The Structures Company is an AA/EOE.
 
Job Number: 222
Job Location: NC
Rate: $60.00 - DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II

Description:
Position Summary: This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed. Specific duties and responsibilities include but are not limited to the following:

Essential Duties and Responsibilities:

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Creativity and latitude is expected.
Participate in a variety of process improvement projects.
Able to support design reviews with timely and relevant information and understanding.
Performs other duties as required.

Qualifications & Skills Requirements:

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

Click the link and follow instructions on HOW TO APPLY: LMI ENGINEERING JOB OPPORTUNITIES
 

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 3

Description:
Design and Analysis Engineer 3

Location: Oklahoma City, OK
Duration: 6 months

Job Description:
Client is seeking an engineer on the C-17 Military Airlifter Program in Oklahoma City, OK. Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
664-Electronic Sys Design & Analy


If interested then please share updated resume at ravi@iconma.com
 
Job Number: 18-12050
Job Location: Oklahoma City,, OK
Per Diem: available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 4 (Aircraft Communication / Network System)

Description:
Design and Analysis Engineer 4

Location: Oklahoma City, OK
Duration: 6 Months

Job Description:
The Client Company is seeking Communication / Network System Design engineers within Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. This is a senior level position in Avionics and Flight Controls Engineering organization of the C-17 Military Airlifter Program in Oklahoma City, OK. Working under the supervision of Lead Engineers, selected candidates will quickly integrate into the team and collaborate with multiple engineering disciplines in the specification, test and support of airborne electronic subsystems including sensors, controls, communications, displays, and processors. The candidate will participate in projects aimed at solving issues and implementing their solutions utilizing Agile methods and processes. The candidate will have the opportunity to work with customers and their client representatives to obtain feedback for product enhancements and corrective actions.

Tasks may include:
Development of electronic and electrical system solutions
Participation in modification projects for basic hardware and software designs based on platform requirements
Execution of systems and software testing to verify operational and functional requirements
Management of hardware/software suppliers' performance to ensure customer requirements are met
Supporting resolution of product integration & aircraft production issues
Researching new technologies for potential application to C-17
An ideal successful candidate possesses technical and engineering skills already developed while attaining his/her Science degree(s) and entry level work experience.
Excellent communication skills (written and verbal) and the ability to work in a team environment within a complex organization is a must.
The selected candidate will be tasked to develop solutions to technical problems of limited scope and impact; and to apply solid engineering, scientific, and common-sense principles in the context of organizational dynamics and real-world cost & schedule targets.

The selected candidate will integrate into our Agile Development teams, where personal attributes that include ownership, responsibility, and commitment are a must. The candidate will be expected to interact professionally with customers, suppliers, field representatives, and fellow engineers. The candidate must be dependable, innovative, an independent thinker, and possess excellent & creative problem-solving skills. The candidate should have demonstrated 'hands on' capabilities in class projects and/or previous work experience or hobbies. The candidate should also be able to demonstrate through past experience his/her capability to work independently, persevere, and generally 'find a way' when roadblocks are encountered.

Education / Experience:
Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
668-Communication / Network System

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-11985
Job Location: Oklahoma City,, OK
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design/Mechanical Engineer-Cabin Interiors

Description:
Design/Mechanical Engineer-Cabin Interiors
Savannah, GA
Rate: $55.00/HR

Unique Skills:

Design Engineer/Mechanical Engineering for Aircraft Cabin Interiors in Completions. Design responsibilities primarily involve engineering design of new and derivative versions of interior furnishings and amenities as part of outfitting new aircraft. Examples include custom cabinetry such as galleys, lavatories, closets, storage compartments, interior peripheries, water/waste systems, oxygen systems, electrical wire routing, lighting, PSU, cabin liners, ledges/dados, entertainment equipment installations, and seating installations. -Design engineer will design installations for aforementioned commodities along with necessary airframe modifications to meet load requirements of the interior installation and should have the competency with Weight & Center of Gravity Analysis. -Experience with Part 25 aircraft requirements and some familiarity with Part 135 requirements. -Engineering design work includes the creation of drawings/models using either CATIA V5, or AutoCAD and SmarTeam. -Design Engineer will be required to liaison with the shop on engineering issues. Design assignments include but are not limited to: -Item Installation Analysis -Similarity Analysis -Configuration Analysis Design engineer will employ design standards consistent with company standards and accepted design methods executed under the direction of the Mechanical Engineering Group Head to meet aircraft delivery schedule.
 
Job Number: 8982
Job Location: Savannah, GA
Rate: $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designers - Marine

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Looking to hire multiple Electrical, Structural, Outfitting, Piping, HVAC, and Mechanical Designers.
 
Job Number: 1
Job Location: Pascagoula, MS
Rate: $15-46/hr
Per Diem: No
Overtime: Yes
Duration: LT
Start Date: tba
Input Date: 11/14/2020
Firm Name: JERRY PITTMAN & ASSOCIATES INC
Attention: Kennon Barton
Address: P O BOX 5367
City, State: VANCLEAVE, MS 39565
Phone: 228/826-9255
800 Phone: 877/717-8104
Fax Phone: 228/826-9258
Website: www.jerrypittman.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Director of Engineering

Description:
POSITION SUMMARY:
Responsible for Global Engineering of charging products and services. This spans the range of charging solutions, including on/off vehicle, high power, industrial and laboratory. The role will collaborate with the global product team to ideate advanced solutions for target geographies and be responsible for the Engineering execution of projects to support growth initiatives. A strong, direct mentor to Engineering colleagues, this individual will inspire and lead product developments to maintain global market leadership, meet financial goals and drive organizational growth strategies.

DUTIES AND RESPONSIBILITIES:
• Provide hands-on technical and organizational leadership and mentoring to the cross-function, distributed Engineering team
• Lead multi-disciplinary R&D team of Electrical, Mechanical, Software, Systems development teams and Product Validation, Certification and Configuration Management functions
• Plan and allocate appropriate engineering resources for projects and provide scheduling, man-power, asset allocation, budgets and estimates to complete programs by deadline
• Work closely with Product Management and Global Leadership to define product strategy and requirements
• Establish engineering department goals, objectives, performance metrics, and initiatives to support corporate objectives.
• Ensures an engaged, innovative, and inspiring working environment be maintained by motivating, challenging, and coaching for personal growth, entrepreneurship, and customer engagement.
• Identify and develop new and emerging technologies as well as internal/external competencies required to be best in class.
• Develop and support new product launch activities by following and continuously improving new product introduction process. Develop and maintain “should cost” metrics for new designs, and ensure market competitiveness by meeting or beating product cost goals.
• Defines and drives accountability, consistency, quality, standardization and compliance across product development to ensure regulatory compliance and operational efficiency.
• Establish and maintain internal design review and release processes, and guidelines for product development and engineering designs.
• Ownership of regulatory compliance, and compliance portfolio of charging products
• Responsible to introduce customer specific applications, new products and product changes according to agreed timeline and global guidelines.
• Lead, train and support the team, to achieve their goals and objectives.
• Perform regular reviews with team members according the companies guidelines.
• Review and improve standards, best practices and procedures on a regular basis.
• Ensure legal requirements for NA market are met for products and applications

MINIMUM QUALIFICATIONS
• 5+ years track record of leading cross-functional Engineering organizations, developing leading products in competitive markets. Product development and launch experience for vehicle OEMs strongly preferred
• Experience leading broad engineering teams, with highly varied responsibilities and priorities in evolving, highly competitive markets. Proven success hiring and developing effective engineering teams
• Track record of planning and structuring of distributed teams to support business objectives
• Demonstrated success leading new product introductions with products utilizing electronic products and custom mechanical components.
• Experience in development and integration of local and networked communication technologies (eg WiFi, Bluetooth, Zigbee, cellular) and cloud services.
• Experience in working with outsourced manufacturers desired
• Experience leading new product developments through regulatory agency process (eg UL, VDE, CQC)
• Demonstrated record leading products through vehicle OEM product acceptance process

EDUCATION
• Bachelor’s Degree in Engineering, Master’s preferred

REQUIRED TRAVEL
• 10-30%

In addition to Knowledge cited in Director of Engineering, demonstrated knowledge of:
• 6-sigma tools and practices
• Project estimating and planning, bases of estimate
• Scrum and sprint techniques for development
• Design tools, eg SolidWorks, Altium, C++, LINUX
• Manpower planning and resourcing
• ISO14001/9001, IATF/TS16949 processes
 
Job Location: Monrovia, CA
Rate: Open
Duration: Permanent
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Sidney Williams
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL DESIGNER

Description:
JSG is hiring a Designer - Manufacturing for a 18+ months contract opportunity in Stratford, CT!

Description:

Supports and manages low to medium complexity projects around the design and planning of layout for assembly and materials handling.
Adaptation of low complexity machine or equipment design to factory and production conditions.
Planning of sequence of operations and specification procedures for the fabrication of tools and equipment and other functions that affect product performance.
Responsibilities include Process Design, Work Instruction Planning, and Manufacturing Support of Electrical Equipment and Wiring Assemblies ( circuit breaker panels, relay panels, switch assemblies, etc..) for all programs supported, evaluating designs for producibility, developing harness tooling and manufacturing plans for components and harness assemblies. Interface with Design Engineering, Operations, Quality, Programs, Product Safety and the supply base in an effort to resolve issues relating to production.
Candidate should be proficient in interpreting wiring diagrams, schematics, and engineering bill of materials, and also be familiar with CATIA 3D Drafting, and all Microsoft applications. Minimum 3+ years' experience with working in an electrical manufacturing / production environment.
 
Job Number: 367632
Job Location: Stratford, CA.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router

Description:
EWIS 3-D Wire Router - Cabin Development

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Ideal Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
- 3D wire routing
- EWIS
- Cabin Management System
- Cabin Entertainment System
- Cabin Lighting
- Cabin Switch Controls
- Telephone System
- Satellite communications
- Water System
- Waste System
- Cabin interior monuments
- Seats

Education and Experience Requirements:
High School Diploma/GED required
 
Job Number: 9081
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 3-D Wire Router - Cabin Development

Description:
• In Cabin Development, we design, engineer and certify the next generation of cabin interiors.

Education/Skills
• Candidates will have electrical/mechanical engineering experience with Cabin Interiors and Systems to include but not limited to:
3D wire routing, EWIS, Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, Cabin interior monuments, Seats

Software experience preferred:
• Catia V5
• SmarTeam
• Capital Logic (Mentor Graphics)
• Office Suite (Word, Excel, Power Point, Outlook)
 
Job Number: 24-247
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Engineer

Description:
Role Description


This position is for an engineer that will perform EWIS design and integration tasks associated with the Electrical Systems used on Engineering Flight Simulator (EFS) and its simulation host equipment. The aircraft simulator is a static SIM with a representative cockpit environment, avionics & flight controls integrated systems, visual system and simulation host computers running the performance and aero models from an Aircraft. This position is located in Moses Lake, WA.



Job Duties and Responsibilities

Perform as a technical authority in Electrical Wiring Interconnect System (EWIS) design applied to an Engineering Flight Simulator (EFS);
Modify, Rework and Fabricate wire harness assemblies for EFS.
Assist as the cognizant engineer responsible for all aspects of an EWIS design;
Modify and maintain wiring diagrams, installation drawings, cable/wire assembly drawings, harness fabrication drawings by translating from aircraft electrical system schematics;
Select qualified electrical components such as Connectors, Backshells, shield coverage, strain reliefs, over-braid, and other parts.
Provide on-site engineering support and coordinate integration of EFS design change activities originated from EWIS requirements;
Investigate EWIS component/assembly failures and assist in resolving EWIS issues during any EFS testing;
Generate reports detailing the aircraft EWIS design/modifications/testing;
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Familiarity with industry specifications and standards associated with EWIS, including but not limited to electrical design for different aircraft systems, wiring diagram requirement definition, ESSDs, electrical assemblies and overall system development methodologies.
Experience with translating from existing aircraft system schematics and wiring diagrams;
Familiar with selection of components used in aerospace wire harness construction and installation;
Experience using dedicated tooling associated with wire harness manufacturing/assembly;
Capable of resolving technical issues relating to EWIS.
Experience with ENOVIA / CATIA V5/V6 Wiring Workbench or VISIO is preferred.
Proficient at prototyping new designs and performing rework.
Experience with surface mount components is preferred.
Represent Electrical Group in packaging meetings related to wiring harnesses;
Excellent oral and written communication skills;
Fluency with MS Office/SharePoint applications.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace Experience is required (5-7 years preferred) in aircraft Electrical Wiring Interconnect System (EWIS) design
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical / Electronic Systems Design & Analysis Engineer III- (OK)

Description:
Candidate to perform Lab Test Equipment/Systems Operations, Support & Maintenance, and Ground Support software modification and integration. Familiarity with ATLAS, test equipment, LabWindows CVI and ability to troubleshoot electronics desired.

Works with customers to develop and document complex electronic and electrical system requirements. Analyzes and translates requirements into system, hardware and software designs and interface specifications. Tests and validates to ensure system designs meet operational and functional requirements. Monitors supplier performance to ensure system integration and compliance with requirements. Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle. Researches specific technology advances for potential application to company business needs.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer
Location: Cedar Rapids, IA
12+ month contract
Active Secret Clearance is REQUIRED.


Job Description:

Our client is looking for an experienced Electrical Design Engineer to upgrade/modify existing designs. Work includes but is not limited to upgrading components and design to more modern systems.

Required Skills:
•Experience with GPS & Navigation systems design
•Mixed Signal Design (Digital/Analog/RF/Power Supply)
•Some re-use of existing design, possible PWB space savings from re-engineering/upgrading design with new components
•Power Supply Experience a plus
•Digital Interfaces
•Peripherals, I/O design
•Active Secret Clearance is REQUIRED

Min years of experience:

Minimum 5 years of experience

Degree Requirements:

Bachelors in Electrical Engineering or Electrical Engineering Technology




Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54570
Job Location: Cedar Rapids, IA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Long Term
Start Date: September
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Senior Electrical Design Engineer

Location: Rockford, IL

6+ month contract

Description:

Responsible for design and development of electronic control units and associated printed wiring board assemblies for military and commercial aircraft. Applies principles and techniques of electrical/electronic engineering to ensure design preparation is in accordance with applicable specifications, customer requirements and standard work practices; interfaces with various functional groups to coordinate conceptual, preliminary, and detailed unit design, engineering documentation releases, development testing, qualification testing, and entry into service.
Responsibilities:
•Preliminary Design Activities ◦Unit and Module Requirements Creation using Doors
◦Requirements Management (Validation of requirements, CR control using IBM Rational tools)

•Detailed Design Activities ◦Schematic design using Concept HDL
◦Design Reviews per department standards
◦Design Analysis per department standards and customer specifications
◦Supporting creation of Test Requirement Specifications (TRS) and development of production test solution.

• Verification Activities ◦Generate procedures for testing products (Development and Qualification Testing)
◦Development and qualification testing at a unit level and at a system level ◾Use of lab equipment
◾Support other locations as needed

◦Document results of design studies, trade studies, and failure analyses.
◦Provide technical assistance to manufacturing, as required.




Min years of experience:

At least 5-7 years direct experience in product development



Degree Requirements:

BS Electrical Engineering or advanced degree.





Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54611
Job Location: Rockford, IL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift


Unique Skills:
- Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill
and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7701
Job Location: Savannah, GA
Rate: $60.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Aircraft Interior Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in writing engineering corrective action dispositions by performing associated research; creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-777-110701
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Eng

Description:
ob Summary
In this role, the In-Circuit Test (ICT) Engineer will specialize in the development and debug of In-Circuit Test (ICT) programs for Takaya, HP, and Seica machines. The ICT Engineer is responsible for determining the best method of achieving the highest test coverage using different test processes and must have board level understanding of In-Circuit Test (ICT) strategies to ensure test capability.

Job Responsibilities
•Responsible for supporting In-Circuit Test equipment including development of new test programs on Takaya, HP, and Seica machines
•Responsible for success of assigned/allocated tasks and activities
•Perform root cause analysis on Production failures
•Ensures compliance to development processes and standard work requirements.
•Follows processes and operational policies in selecting methods and techniques for obtaining solutions
•Perform diagnostics on production assemblies and design and perform testability reviews
•Support production testing and implement Engineering Change Orders (ECO's) and program enhancements

Basic Qualifications
•Prior experience in developing programs on Takaya, HP, and Seica machines
•Have solid communication, documentation and collaboration/teamwork skills

Desired Skills
•Have domain knowledge of avionics products
•Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline
 
Job Number: 107
Job Location: Melbourne, FL
Rate: open
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Barbara
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Eng

Description:
Sr. Electrical Engineer to develop and test digital circuit designs.

Development and test of high speed digital circuit board designs (processors, peripherals, back-plane, I/O, etc) requiring the application of electrical engineering principles and techniques. The candidate will work directly with a PCB designer during the schematic capture and layout phases. Excellent teamwork and communication skills required. Also requires knowledge of hardware design processes, signal integrity analysis, manufacturability, testability, and thermal control.

Assignment may also include deriving and allocating circuit board design requirements from higher level system requirements (within a DOORS database) and developing technical specifications.
Assignment may also include integration of product design and formal environmental qualification testing of the product.

REQUIRED:
-Prior experience with high speed digital design (manager needs someone who has DEVELOPED schematics and GUIDED THE LAYOUT of high speed digital circuit boards)
-The ability to obtain a US Department of Defense (DoD) security clearance (US Citizenship required.

PREFERRED:
-Direct industry experience and knowledge of MIL-STDs (461, 810, etc), DO-160, and DO-254 is preferred.
-Experience with VITA/VPX standards preferred
 
Job Number: 159
Job Location: Cedar Rapids, IA
Rate: open
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: asap
Input Date: 11/14/2020
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Barbara
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Must be able to acquire a clearance

•Programming experience with NI Lab View and Lab Windows software for integrated systems.
•Integration of automated test systems using COTS based VME/VXI/PXI/LXI/GPIB interfaces and equipment.
•Cradle or Doors requirements management experience (or comparable application)
•Proficient with Creo and Pro 5.0 (optional)
•Proficient with product lifecycle management software Wind chill 9.1
•Proficient in Zuken schematic capture software
•Very Good technical writing and verbal communication skills.
•Ability to present and communicate effectively to a broad technical community.
•Ability to work independently as well as a team setting.
•Mechanical interface design experience.
 
Job Number: 44911
Job Location: CO & TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:

 
Job Location: ,
Rate: /
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
ELECTRICAL ENGINEER

ENEA is currently searching for a qualified Electrical Engineer to work on a 12-month Contract-to-Hire role working on Medical Devices.

PRIMARY FUNCTION AND INFLUENCE:

• Measure, analyze, modify, and participate in development of complex electromechanical medical devices.
• Will be directed by a senior staff engineer/engineering team in the completion of project goals.
• Assignments include prototyping, testing, analysis, design modification/improvement and integration.
• Should possess technical ability to work alone and with others to complete tasks.
• Learn and apply FDA guidance, as needed, on medical device development to ensure compliance.
ESSENTIAL JOB FUNCTIONS:
1. Possess core electrical engineering knowledge expected from a graduate of an accredited university.
2. Ability to analyze, test, verify, document and modify electrical circuits and circuit boards.
3. Interact with/seek help from others to complete tasks toward team goals.
4. Complete and keep current in all mandatory training required to perform assigned tasks.

REQUIRED SKILLS & EXPERIENCE:

• Experience operating electrical instruments including oscilloscopes, DMMs, power supplies, function generators, logic/protocol analyzers, and soldering equipment a must.
• With limited input from others, constructs/conducts experiments and determines how to repair/change electrical hardware given schematics/artwork.
• Ability to work with others to formulate hypotheses, draw conclusions from, and make recommendations for improvements/changes based on experiment results is expected.
• Working knowledge and laboratory experience with microcontrollers, stepper motors and communication interfaces (Ex.: UART, SPI, I2C, USB, etc.).
• Electrical hardware design experience with analog circuits, power electronics, power supplies and battery chargers.
• Utilize excellent troubleshooting skills with hands on approach to identify root cause and corrective actions.

PREFERRED SKILLS & EXPERIENCE:

• Ability to perform analysis with tools like SPICE and implement design changes with ECAD tools a plus.
• Skill on design and troubleshooting of power supply and battery management a plus.
• Experience with circuit and layout design to improve EMC/EMI response a plus.
• Previous medical device industry experience also a plus.
 
Job Number: 647
Job Location: Lake Forest, IL
Rate: PD Split or hourly
Per Diem: possible
Overtime: possible
Duration: CTH
Start Date: 08/15/2018
Input Date: 11/14/2020
Firm Name: ENEA SOFTWARE AND SERVICES
Attention: Ashley Kaapuni
Address: 2555 E CAMELBACK RD STE 280
City, State: PHOENIX, AZ 85016
Phone: 480/753-9200
Fax Phone: 480/753-6400
Website: www.enea.com/services/expertise

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Responsibilities:

> Identify customer requirements
> Design electrical systems / products and develop/generate electrical schematics, design specifications & technical drawings
> Specify components, wire and connector sizing, and interfaces; validate schematics and circuit diagrams
> Process electrical Engineering Change Proposals (ECPs)
> Create Bill of Materials (BOM); research suitable solutions while estimating costs & schedule
> Create models and/or prototypes of products
> Work with others on design, product management & production teams, as well as with clients and contractors
> Design test plans and conduct tests; record, analyze, and interpret test data
> Propose modifications and retesting products as required for product compliance to specifications
> Qualify the final product and/or system while adhering to Quality Management processes and policies
> Prepare product documentation, write reports, and give presentations for design and other engineering reviews
> Resolve process problems, provide recommendations to improve processes & monitor products to improve on future design; service and maintain equipment as necessary
> Work within the National Electrical Code to ensure safety and compliance

Requirements:

> 5+ years of engineering experience with a Bachelor’s degree in Electrical Engineering or equivalent
> Strong electrical experience in AC/DC and with generators, chargers, battery systems, etc.
> Experience in electro-mechanical system design & networking systems (wireless, Ethernet, serial communications, etc.)
> Experience with soldering, crimping, MIL spec connectors and harness design
> Proficiency with Microsoft Office to include Excel, Word, PowerPoint, and Project
> Experience with general office software tools; ability to utilize the Internet for research and resource gathering; ability to manage communications and calendars through email.

Preferred:

> Experience in designing electrical components, assemblies, and subassemblies
> Servo Motor Design and Control
> PLC design experience is a plus
> 2D and 3D drawing experience (SolidWorks Routing a plus)
> Experience with IPC & MIL standards for government customers
 
Job Number: 041_2018
Job Location: Baltimore, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 6 - 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Windsor Locks, CT
Pay Rate: $27/hr
Duration: 6 month W2 contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Description/Comment:
Review and interpret Customers’ requirements regarding Electrical Component Quality, Product Assurance, Reliability and the equipment’s operating environments including the Radiation environments (Total Dose and Single Event Effects).
• Help develop and manage the Preliminary Electrical Parts List and support the Supply Chain in procurement of same.
• Develop and maintain component procurement specifications, drawings, and Statements of Work (SOW) for Custom devices.
• Prepare test plans and procedures for Heavy Ion testing and Proton testing. Interpret Radiation Lab test results.
• Support and participate in Design Reviews for Supplier Designed Equipment (SDE). Responding to component manufacturer’s requests for information (SRI).
• Identify alternate component, help reduce component lead times, and mitigate component obsolescence.
• Review and assessing GIDEP alerts for potential impacts.
• Prepare and deliver presentations to the Customer’s Parts Control Board (PCB)

Additional Job Details:
Clear, concise communication style and attention to detail with a high degree of accuracy required.
• Willingness to work paid Overtime is required, as needed to support program milestones. Flexible working arrangements are available.
• Experience with Radiation Effects Analysis including Single Event Upsets and Latch-up desired.
• Knowledge of Radiation effects and Single events on non-volatile memory devices desired.
• Prior experience with Component Engineering for NASA or Military programs (development through flight) desired.
• Familiarity with High-reliability (Mil-class S,V and K) electrical parts control requirements (selection, qualification, traceability, inspection) desired.
• Component Failure Analysis processes, including hands-on experience with test equipment desired.
• Familiarity with military specifications and military part numbers desired.
• Experience with Electrical Component derating practices desired.
• Familiarity with establishing requirements for Component Procurement Specifications preferred.
• Failure Analysis techniques and use of FA lab equipment preferred.
• 1-3 years of experience in a similar role preferred
• Bachelors degree required
 
Job Number: 9450
Job Location: Windsor Locks, CT
Rate: 27
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
JOB SUMMARY
Reporting to the Engineering Manager the Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided
JOB RESPONSIBILITIES
• Electrical Engineer applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience.

• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Required Skills:
- Experience designing data acquisition systems for aircraft and test lab environment.
- Working knowledge of force, flow, pressure and temperature sensing technologies.
- Knowledge of ARINC bus architectures; 664, 429, 825
- Experience with IADS data display and analysis software

Education and Experience Requirements:
Bachelor's degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 8930
Job Location: Savannah, GA
Rate: $52.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - AutoCAD

Description:
Cabin Management systems, in-flight entertainment. Military avionics experience may be considered. AutoCAD
 
Job Number: 18-12794
Job Location: TX
Per Diem: Split
Overtime: Possible
Duration: Possible Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Cabin Development

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Ideal Candidates will have electrical engineering experience with Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System

Education:
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-257
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Location: Centennial, CO
Rate: DOE
Duration: 1 year contract
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
- Provide touch labor for the SIL modifications for Vulcan.
- Technician labor for cable build and rack wiring modifications.

Education:
- High School Diploma
- 5+ years of experience
 
Job Number: 8723
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 4 (Secret Clearance)

Description:
Electrical Engineer - Level 4

Location: Grand Prairie, TX
Pay Rate: $55/hr - $67/hr
Duration: 1 year W2 contract
Shift: First, 9/80
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Description

- Review of the ARTS-V2 radar architecture, review the simulation modeling approach, capture the phase noise and clutter correlation model within the existing Mathcad models, and determine the impact on target detection and tracking.

Mandatory:

Radar Systems Design
RF Circuit Design - High Frequency Design: 11+ years experience required
 
Job Number: 9452
Job Location: Grand Prairie, TX
Rate: 55-67
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power (OK)

Description:
POSITION OVERVIEW- KEY JOB ELEMENTS:
This position is for the power electrical engineer position. This candidate will provide technical expertise, project management, as well as, project development for the client's electrical system in this plant facility. This engineer will handle all aspects of this plant's electrical system and provide electrical engineering for capital improvement projects (refinery). There will be occasion where support will be needed in the instrumentation area. BSEE REQUIRED.

Key Job Duties and Job Responsibilities:
These key job elements are included but not limited to the Electrical Engineer position:

This candidate will be required to oversee power requirements and coordinate with other projects in progress. Conduct system analysis studies (load flow, voltage drop, short circuit, etc.) for capital improvement projects. Prepare electrical equipment specifications and obtain and review all vendor quotes for electrical equipment. Must interface with other engineering personnel, construction contractors, and vendors during the project. Ensure during planning all work is completed within corporate safety guidelines and promote same throughout the project to completion.

Additional job responsibilities required for this position are as follows:
Review and approve electrical drawings for projects pertaining to equipment location, one-line diagrams, electrical area classification and schematics. Prepare cost estimates (both budgetary and definitive) for current and future electrical projects. Must support multidisciplinary projects by providing electrical expertise and additional recommendations.

Must be able to participate in the development of work scope for electrical equipment related to turnaround and capital projects. Develop projects to meet the reliability division's objectives including reliability, capacity, growth, maintainability and expendability.

Inspections: will be required to perform safety inspections and initial startup safety reviews.

Cost Estimates: will be required to manage electrical projects, such as cost and scheduling, safety, and other miscellaneous from conceptual studies, design, construction and safe start-up. Will be required to perform preliminary engineering studies by preparing project objectives letter, milestone schedule and cost estimate for current projects and future projects.

Standards and Safety: Must adhere to company standards in electrical design, equipment specifications, construction and testing. Must have the ability to apply and interprete the National Electric Code and other applicable codes and standards (e.g. NFPA, API, UL, API, and other). Must adhre to the county and city regulations including special equipment approvals (UL) and building permits.

Additional skills/requirements:
1. Develop one-line diagrams that will accomplish the needs of a project and the reliability of the refinery.
a. How implementation will show how to control cost on a project while allowing expansion in the future
b. Show protective relaying schemes.
1. Develop options and develop Substation layouts that will accomplish the need of a project and the reliability of the refinery.
a. How implement enough to control cost on a project while allowing expansion in the future
b. Show equipment layout using appropriate working space requirements.
1. Brainstorm options and develop Medium Voltage and low voltage feeder routing using either cable tray or conduit in classified areas.
a. Use proper grounding.
b. Structural steel to run the tray on.
c. Interface between multiple engineering disciplines required to get the steel done.
1. Conduct and evaluate power studies (with ETAP) of electrical systems to verify that the new electrical equipment will work for:
a. Load Flow
b. Voltage Drop
c. Incident Energy (Arc Flash)
d. Short Circuit Current Analysis (Bracing)
1. Medium Voltage Switchgear experience in design
a. Writing specifications
b. Approve vendor (shop) drawings
c. Incorporating protective relaying schemes using Schweitzer relays
d. Familiar with Client Powervac switchgear and Client's new Entelliguard system
1. Medium Voltage MCC's (Specific to Allen Bradley)
a. Writing specifications
b. Approve vendor (shop) drawings
c. Brainstorm electrical schematics used to install the MCCs
d. Incorporating protective relaying schemes using Schweitzer relays
1. Medium Voltage Bus Duct
a. Writing specifications
b. Approve vendor (shop) drawings
1. Unit substation Medium & Low Voltage transformers
1. Writing specifications
2. Approve vendor (shop) drawings
3. Incorporating protective relaying schemes using Schweitzer relays
1. Low Voltage Switchgear (Schweitzer relaying and Client's new Entelliguard)
a. Writing specifications
b. Approve vendor (shop) drawings
c. Incorporating protective relaying schemes using Schweitzer relays
d. Familiar with Client Powervac switchgear and Client's new Entelliguard system
1. Low Voltage Bus Duct
a. Writing specifications
b. Approve vendor (shop) drawings
1. Low Voltage MCCs
a. Writing specifications
b. Approve vendor (shop) drawings
c. Brainstorm electrical schematics used to install the MCCs

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-100218OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months
Start Date: 10/01/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Secret Clearance

Description:
Major purpose:

Electrical design, integration, test and production support of simulation equipment. Responsibilities include development of system-level drawings, cable drawings and wire lists.



Must have an Active Secret Security Clearance.

"Bachelor's degree in Electrical Engineering or equivalent experience in an engineering discipline

"Prefer 4+ years of directly related experience

"Cable harness design experience

"Experience with electro-mechanical devices such as switches, relays, servos and solenoids

"Analog and digital circuit design experience

"Experience using CAD tools and Microsoft Office products

"Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers

"Ability to develop innovative solutions both individually and as part of a team

"Close attention to detail with a track record of producing designs that are right the first time



Desired Qualifications

"Experience using AutoCAD

"Familiarity with aircraft cockpit systems

"Experience using Programmable Logic Controllers

"Simulation equipment experience

"Circuit board layout experience

"Existing security clearance
 
Job Number: 18-24887
Job Location: Broken Arrow, OK
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-01-09 00:00:00.0
Start Date: 2018-07-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer II

Description:
Design power conversion circuitry potentially utilizing any standard power conversion topologies (non-isolated and isolated)
• Architect circuit card assembly-level power schemes.
• Utilize power conversion simulation programs like SIMPLIS to model converter design performance.
• Utilize analysis tools like MathCAD to assess electrical design robustness of power circuitry.
• Guide Electronic Computer-Aided Design (ECAD) personnel through PWB layout of power circuitry and technical drawing creation.
• Perform high level thermal analyses of critical power components.
• Design power converters to meet a set of requirements, sometimes defining those requirements.
• Perform design work within the bounds of a given schedule, and sometimes define the schedule.
• Must have a Bachelor of Science in Electrical Engineering from an accredited University, with a minimum of 5 years of professional experience.
• Must have professional design, analysis, and test experience with analog electronic design and analysis, including FET, BJT, and Op-amp circuits.
• Must have professional design, analysis, and test experience with linear converters, and any two of the following non-isolated converter topologies: buck, boost, buck-boost.
• Must also have design, analysis, and test experience with any one of the following isolated converter topologies: flyback, half-bridge, full-bridge, push-pull.
• Must have professional experience with performing circuit card assembly-level power architecture trades.
• Must have professional experience using PSPICE (or similar), and other circuit simulation tools.
• Must have professional experience with analysis tools such as MathCAD.
• Must have professional experience with guiding ECAD folks through layout (power focus).
• Must have professional experience with thermal concerns of electronics.
• Must have professional experience with taking, analyzing, and correcting Bode plots.
 
Job Number: 8107285
Job Location: Tucson, AZ
Rate: 70-75
Duration: 18 Months
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: John Ryan
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Wire Harness W/AutoCAD (215)

Description:
*This is a full-time, 6-month contract opportunity located in Lexington, KY*



We are searching for a contract Electrical Engineer who will develop military aircraft component / system designs drafted under SAE, ANSI, and ASME. After design, the work will be to handle the fabrication, installation, integration/installation of the design(s).



Required:
*6 years’ experience in wiring and wire harness design, 2D (like AutoCAD)
*Knowledge of SAE AS50881 design guidelines and ANSI/ASME Y14.100 design/drafting standards.

*Experience with an engineering change process and/or configuration control process

*Must be eligible and apply for clearance upon starting; requires US Citizenship.



Pluses:
*CATIA V5 design experience
*Use of TeamCenter Engineering and JobScope Reports
*Familiarity with C-130 or other aircraft; particularly wiring. Experience with an engineering change process and/or configuration control process
 
Job Number: 215
Job Location: Lexington, KY
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer(EEE Parts Engineer-Design/Testing) needed in Dulles, VA #8385838AS

Description:
Job Title: Electrical Engineer(EEE parts Design/Testing)#8385838
Location: Dulles, VA
Pay: Open, DOE. Negotiable.
Length: 6 month with possibility of Contract to hire

**Top 3: Electronic parts design and test expertise, ability to work in team setting, understand electrical schematics. Team will be an electrical circuit design engineer, materials engineer, mission assurance engineer, and a CAD designer.**

EEE Parts Engineer responsible for supporting spacecraft programs in the selection of EEE parts for new designs compliant to NASA INST-002 requirements, support identification and mitigation of obsolete parts, generate and maintain spacecraft approved EEE parts lists, review and assess GIDEP and similar technical alerts, provide failure review boards with recommendations for failures involving EEE parts. Interface with customer EEE parts engineers as well as with program lead engineers. Detailed knowledge of EEE part types suitable for spaceflight use and in-depth understanding of INST-002 standard is required for this position.
 
Job Number: #8385838AS
Job Location: Dulles, VA
Rate: 54/hr W2, DOE
Per Diem: N/A
Duration: 6 Month, Possible CTH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineering Test Specialist

Description:
Notes from the Hiring Manager:

* Testing background with electrical work experiences; ability to read blueprints, engineering drawings
* Networking and circuitry exp with above average computer knowledge (Linux, VMWare, Redhat, etc.)
* Awareness/knowledge of electrical safety and power requirements

Summary:

To perform Configuration and Acceptance Testing of Complex Electronic Systems / Assemblies. Performs a variety of complex technical functions related to the support of manufacturing and engineering activities such as set-up, operation, testing or calibration of systems, circuitry, networking, software, and specialized equipment within a production setting.

Job Description:

> Knowledge of analog and digital symbol identification
> Knowledge of test practices and procedures.
> Personal computer skills required to configure and load SW.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to operate test equipment such as: ohmmeters, digital voltmeters, generators, counters, oscilloscopes, and personal computers.
> LINUX Operating System experience able to run detailed procedures to configure Firmware and load Software, Test and Troubleshoot, RF Experience, and run Acceptance Test Procedures.

Knowledge, Skills, And Abilities Required:

> 5+ years of experience with an Associate’s Degree (highly preferred) or technical training in a related field
> Must be a US Citizen (applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information).
> State of the art knowledge of electronics - both digital logic and analog basics.
> Knowledge of Linux, VMWare, Redhat & other software packages used in virtual machines.
> Ability to operate test equipment and build test tooling in fully integrated electronic system.
> Knowledge of test practices and procedures, specifically trouble shooting methodology.
> Ability to read/interpret schematics, assembly drawings, parts lists and wire data lists.
> Ability to understand component specifications.
 
Job Number: 028_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Fabrication Technician

Description:
Qualifications and Education Requirements
Background in fabrication of electronic chassis, rack and cable assemblies, utilizing minimal documentation
Proficiency in soldering of connectors and minimal PWB component assemblies, crimping of connector pin assemblies
Ability to interpret schematic drawings, and mechanical drawings
Familiarity of electronic components such as switches, relays, diodes, etc
Familiarity with DMM’s and other basic electronic test equipment
Ability to perform basic checkout and troubleshooting of electronic components
Ability to use common hand tools for mechanical assembly and familiarity with fasteners
Basic PC applications knowledge preferred: MS Word, VISIO, MS Excel

We are looking for someone with fabrication experience with Racks, Rack Wiring, the chassis ( test boxes) we building for inside the box. This is a lot of assembly with minimal supervision and wiring in both connectors, and discrete electronic components and some PWB’s
****Seeking technician that can do fabrication of chassis/harness, rack assemblies. Not a factory environment, will be reviewing drawing/schematics to fabricate product. Should be able to work independently. There are team members available for reference, but looking for someone with strong fabrication skill to start with minimal training. Will also do certification work on assemblies, cables. During int. will ask about more complex fabrication work done. Ask about ability to troubleshoot fabrication work. Experience working in small teams(2-4 people)
 
Job Location: Dulles, VA
Rate: 40 & up
Per Diem: no
Overtime: possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Justin Taylor
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Engineer

Description:
Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
Check out our other opportunities at www.hi-tecsolutions.com/jobs
 
Job Number: 126041
Job Location: Savannah, GA
Rate: 58-63
Per Diem: yes
Overtime: yes
Duration: l-t
Start Date: asap
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Systems Engineer (Aerospace) - China

Description:
Leading aerospace company are seeking an Electrical Power Systems Engineer for the design and modelling of aircraft electrical systems. This will be working on a range of commercial aircraft development projects, based at their modern facility in Shanghai. Duties and responsibilities will include:-

* Planning and building electrical system simulation platform

* Develop and promote design standards for electrical system

* Define the design specification of electrical systems and equipment

* Simulation model design review

* Responsible for electrical power system architecture, communication interface design, power quality definition

The client is seeking an Senior Electrical Systems Engineer with extensive experience in the simulation, analysis and design of electrical power systems for commercial aircraft (e.g. APUs, power generation systems etc.) This will include a good knowledge and use of simulation and design tools, including Matlab/Simulink, Saber etc.

These positions will be on a fixed-term contract basis of 2-3 years initially, with a strong likelihood of further work beyond this. They come with an attractive salary package which includes allowances for accommodation, home leave (typically 4 times a year), local transport, healthcare etc
 
Job Number: JO01000000155
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: Sept 18 onwards
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Project Engineer

Description:
Electrical Project Engineer

Company: UTAS
Location: Windsor Locks, CT
Pay Rate: $58/hr
Duration: 12 Month W2 Contract
Shift: First
Openings: 1
Travel: Potential travel of 1 trip per quarter.
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*NO RELOCATION COMPENSATION**

Description:
Manages a team and provides direction on research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.

Additional Job Details
-We are now looking for highly motivated and technically sound individuals to join us as an Electrical Project Engineer.
-You will be supporting programs in developing new electronic controller products and will learn aspects of engineering and program management and have the opportunity to see the entire design build and test life cycle.
-Electrical products are typically controllers driving rotating machinery (pumps/fans/actuators) and have built in sensor/data acquisition systems with serial interface controls. They are designed for long life, high reliability and operate in severe space radiation environments.
-Some of these products include: process controllers, sensor signal conditioning, DC/DC Converters, FPGA based digital controllers, brushless DC motor controllers, actuator control/drives, hardware based closed loop system process control, and more.
-Candidates shall have 3 to 7 yrs experience in new electronics design and/or electronics testing.
-Candidates must have the desire and energy to ability to manage/lead the Integrated Product Development Team subject matter experts to ensure the electronics are designed, tested and verified to the requirements while controlling the project budget and scope.
-Project Management Professional training is a plus.

Requirements:
-Bachelors degree or higher
-Strong project/program management experience
-3-7+ years of electronics design/testing
 
Job Number: 8921
Job Location: Windsor Locks, CT
Rate: 58
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
Currently acting as an Electrical Systems and Equipment Designated Engineering Representative (DER) or Engineering Authorized Representative (EAR) within an Organization Designation Authorization (ODA Unit-member). This person, if not already an EAR within Gulfstream's ODA will be expected to be qualified to make application to be added to Gulfstream's Enterprise ODA as an Engineering AR upon being hired into the company.. Should be qualified to review engineering data, review and approve test plans and reports, system test witnessing and review/approval of electrical load analysis. Additionally, Major Repair and Alteration approvals will be required of this position under the ODA. Fault Hazard assessment and System Safety assessments are a plus, but not necessarily required. Candidate should aspire to have these added to their list of authorities if not already present.
4 X 10 Monday -Thursday schedule
 
Job Number: 138969
Job Location: Appleton, WI
Rate: 67-73 hourly
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems and Equipment (DER)

Description:
Electrical Systems and Equipment Designated Engineering Representative (DER) or Engineering Authorized Representative (EAR) within an Organization Designation Authorization (ODA Unit-member). This person, if not already an EAR within companies ODA will be expected to be qualified to make application to be added to companies Enterprise ODA as an Engineering AR upon being hired into the company. Should be qualified to review engineering data, review and approve test plans and reports, system test witnessing and review/approval of electrical load analysis. Additionally, Major Repair and Alteration approvals will be required of this position under the ODA. Fault Hazard assessment and System Safety assessments are a plus, but not necessarily required. Candidate should aspire to have these added to their list of authorities if not already present.
Electrical Systems and Equipment (DER) works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development Responsible for an entire engineering project of major complexity within established scope 2. Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge 4. Leads the development of innovative principles and ideas 5. Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements 6. Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities 8. Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
Education and Experience Requirements:
Bachelor's Degree in engineering or related curriculum applicable to the respective job position required. 13 yrs. specific technical discipline or 15 yrs. broad end experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Technician

Description:
Responsibilities
• Assist with maintenance activities for power conversion equipment. Two significant activities to be performed include maintenance of manually operated bolted pressure contact switches (3250A, 1kV) and pneumatically controlled grounding switches (2500A, 15kV).
• Removal and rerouting of power cables from ceiling cable trays
• Removal and installation of control wiring
Qualifications and Skills
• High School diploma
• Minimum 3 years of relevant experience as an electrical technician
• Physical dexterity to work on bolted pressure switches on the top of converters (approx. 10 ft. above floor) and power cable work in ceiling trays.
• Ability to terminate control wiring
• Experience using low voltage and high voltage (to 15kV) electrical test equipment for insulation resistance and high potential testing
 
Job Number: 105
Job Location: Princeton, NJ
Rate: 25
Per Diem: yes
Overtime: yes
Duration: 1yr+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Barbara
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wiring Design Engineer

Description:
Electrical wiring and Harness Design
Wiring standards and best practice design
Aircraft zonal requirements and coordination
Power, ground, signals, and databuses
Wire gauge and type consideration
Connector and backshell qualification and selection (EMI, high temperature, high vibration, environmentally sealed/hermetic, connector compatibility, pin selection, ect.)
Misc. electrical harness hardware selection (splices, solder sleeves, grounding blocks, tie wraps, terminal lugs, ect.)
Development of configuration managed, electrical harness design packages
Parts list, bill of materials, parts and standards callout
Fabrication techniques for integrated wiring assemblies
Cost, weight, and schedule trade-offs
Wire Diagram and Harness Drawing Generation
Interpretation of system interface control data to conceptual schematics for point-to-point wiring connections between units
Evolution of conceptual schematics into aircraft wiring information
Coordination of 3D data for implementation into harness drawing packages
Creation and knowledge of drawing part number changes vs. drawing revisions
Use of wiring design tool to generate wire diagrams and harness drawings
System integration as it applies to complex wiring assemblies
Good overall working knowledge of aircraft electrical/electronic system
Implementation of wiring and harness level system separation and segregation to avoid common cause failure modes, including electrical signal and power separation
Databus and digital equipment interface considerations


Qualifications

BSEE or equivalent technical training, and a minimum of 5 years applicable industry related work experience in wire design
Experience with IGE-XAO SEE Electrical Expert is preferred; Mentor Graphics, Autocad, Zuken, or similar smart wiring design tool is required
Good working knowledge with Microsoft Office suite (Word, Excel, and PowerPoint) is required
Good working knowledge with Teamcenter for releasing wire diagrams and harness drawings, or familiarity with other PLM systems (such as SmartTeam, etc.) is desired
Good working knowledge with Electrical Wiring Interconnect System (EWIS) is desired



The Structures Company is an AA/EOE.
 
Job Number: 229
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: November
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical/Aircraft Cabin Interiors and Systems Engineering Contractor

Description:
UNIQUE SKILLS
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: - Cabin Management System - Cabin Entertainment System - Cabin Lighting - Cabin Switch Controls - Telephone System - Satellite communications - Water System - Waste System - EWIS - Cabin interior monuments - Seats Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD.

ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-724-102176
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Component Engineer (177)

Description:
*This is a full time, 9 month, contract position located in Grand Prairie, TX*



We are seeking an electronics component engineer who will be working on DoD/military component analysis, selection, screening, parts qualification and de-rating of electronic components. Duties will include component material selection, new component release/qualification, handle component related failures, handle component noncompliance issues, able to identify pure-tin and counterfeit part detection.



Required:
*2 years’ experience working as an engineer within the electronics components field.
*Electrical component manufacturing process and physical property analysis experience
*Able to get a security clearance after starting, which requires applicants be US Citizens.
*Engineering degree in material science or equivalent



Pluses:
*Experience in the disposition of Q-Notes.
*Familiar with parts release processes, and formal configuration boards.
 
Job Number: 177
Job Location: Grand Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Description/Comment:
Applies technical expertise in the development of C/C++ software for embedded systems.
Develops complete software solutions, and influences the successful completion of supported programs and projects.
Reviews software products for soundness of technical correctness and adequacy.
Produces documentation related to the design and release of software artifacts.
Displays initiative and can work well alone or as a member of a team.
Follows organizational/program/project processes and procedures.
Interacts with senior software personnel through both written and verbal communication.

Required Skills/Experience:
* Minimum of 8-10 years of experience developing embedded software in C and C++;
* Experience developing embedded software in C/C++, preferably for the ARM processor family;
* Experience and knowledge of VxWorks and Linux computing environments;
* Hardware/software integrator for real time embedded software, especially of Ethernet, DDR4, and QSPI, as well as proprietary hardware.
* Experience with all phases of software development including requirements analysis, implementation, unit test, integration and maintenance;
* Bachelors or Master’s Degree in Computer Science, Computer Engineering, Mathematics, Electrical Engineering, or a related field;

Desired Skill/Experience:
* Experience and comfort working with hardware, including troubleshooting with Oscilloscopes, logic analyzers, volt meters, etc., as part of system development team.
* Working knowledge and experience with configuration management tools.
* Excellent written and verbal communication skills;
* Ability to work in an integration lab environment working on software / hardware / firmware development.
* Experience with Eclipse/CDT / VxWorks integrated development environment.
 
Job Number: AZ44101
Job Location: Tucson, AZ
Per Diem: Possible
Overtime: Possible
Duration: 7 months
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Employee Development Specialist 3

Description:
Employee Development Spec 3

Location: Everett, WA
Duration: 6 Months

Job Description:
Conducts learning requirements analysis and establishes learning objectives. Designs and develops course content and instructional materials. Tests delivery environment and establishes system access requirements. Delivers content and assesses effectiveness based on learning objectives. Conducts customer workplace coaching sessions to improve individual or group performance. Deploys development tools and monitors implementation and performance outcomes.

Education / Experience:
Bachelor's and typically 6 or more years’ related work experience, a Master’s degree and typically 4 or more years’ related work experience or an equivalent combination of education and experience.

Skills:
- Must have experience in the field of aircraft sealing. Must be knowledgeable of sealing applications such as fay, cap seal, fillet, and fuel tank sealing.
- Experience in Electrical systems/Fiber Optics is required. Must have working knowledge and work experience in the areas of Fiber Optics routing and installing, examining/cleaning/inspection, light loss testing, electrical routing, crimping, connectors, and soldering.
- Experience in oxygen and plumbing systems is required. Must have working knowledge and work experience with oxygen systems, oxygen bottles, tubing, couplings, and pressure testing systems.

Skill Code: F31-Delivery and Facilitation


Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-12521
Job Location: Everett,, WA
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer

Description:
Active Secret Clearance required!
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests. '
Catia V5 experience is required. Airframe experience is required. Experience designing composites is a plus. Experience with Siemens Fibersim is a plus.
 
Job Number: 104
Job Location: Palmdale, CA
Rate: open
Per Diem: yes
Overtime: Yes
Duration: 1 yr+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Barbara
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 2 FL

Description:
1666/162631
Engineer Manufacturing 2 (Job Number: 18015290)

Number of Openings: 1

Location(s):Florida-Melbourne

Target Start Date: Sep 24, 2018
Target End Date: Sep 20, 2019
Rate: $33-$38/hour

Shift: 1st Shift - 9/80

Clearance: No Clearance Required.

Position Summary

Responsibilities

•Maintains configuration of the aircraft to Engineering requirements
•Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
•Translates Engineering requirements into a product build package
•Collaborates with tool design on manufacturing requirements
•Controls the flow of parts
•Coordinates make vs. buy part decision
•Structures Manufacturing Bill of Material (MBOM)
•Defines sequence of operations and specifies procedures for product build
•Ensures manufacturing processes and procedures are in compliance with customer requirements
•Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
•Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
•Supports the build and test of product
•Clears constraints affecting production of aircraft
•Investigates and initiates corrective actions and improvements in product quality and efficiency
•Collaborates with tool design to ensure product build is repeatable
•Oversees the integration of aircraft assembly technologies and processes
•Provides technical solutions to a wide range of complex and difficult problems
•Experience integrating products from engineering design to manufacturing floor
•Provides detailed written instructions that help facilitate product fabrication

Basic Qualifications:

•Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, Systems Engineering, Industrial Engineering, or Electrical Engineering.
•2 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality


Preferred Qualifications:

•Experience reviewing and interpreting electrical wire diagrams
•Experience supporting aircraft hydraulic and/or fuel integration/maintenance
•Experience supporting enhancement processes that improve production shop floor efficiencies
•Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
•Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
•Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
•Experience supporting aircraft maintenance and/or flight test operations
 
Job Number: MB-1666
Job Location: Melbourne, FL
Rate: 33-38/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 3 FL

Description:
162627
Engineer Manufacturing 3 (Job Number: 18015461)

Number of Openings: 1

Location(s): Florida-Melbourne

Target Start Date: Sep 24, 2018

Rate: $39-45/hour

Location: Melbourne, FL

Duration: 12 Months

Shift: 1st Shift - 9/80

Clearance: No Clearance Required.

Responsibilities

•Maintains configuration of the aircraft to Engineering requirements
•Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
•Translates Engineering requirements into a product build package
•Collaborates with tool design on manufacturing requirements
•Controls the flow of parts
•Coordinates make vs. buy part decision
•Structures Manufacturing Bill of Material (MBOM)
•Defines sequence of operations and specifies procedures for product build
•Ensures manufacturing processes and procedures are in compliance with customer requirements
•Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
•Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
•Supports the build and test of product
•Clears constraints affecting production of aircraft
•Investigates and initiates corrective actions and improvements in product quality and efficiency
•Collaborates with tool design to ensure product build is repeatable
•Oversees the integration of aircraft assembly technologies and processes
•Provides technical solutions to a wide range of complex and difficult problems
•Experience integrating products from engineering design to manufacturing floor
•Provides detailed written instructions that help facilitate product fabrication

Basic Qualifications:
•5 Years of Manufacturing Engineering experience with a Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university; 3 years of engineering experience with Master’s Degree in STEM and 0 years of Engineering experience with PHD.
•5 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality

Preferred Qualifications:
•Experience reviewing and interpreting electrical wire diagrams
•Experience supporting aircraft hydraulic and/or fuel integration/maintenance
•Experience supporting enhancement processes that improve production shop floor efficiencies
•Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
•Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
•Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
•Experience supporting aircraft maintenance and/or flight test operations
 
Job Number: MB-1667
Job Location: Melbourne, FL
Rate: 39-45/hr DOE
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Manufacturing 4 FL

Description:
1668/162626
Engineer Manufacturing 4 (Job Number: 18015567)

Number of Openings: 1

Location(s): Florida-Melbourne

Target Start Date: Sep 24, 2018

Rate: $48-$55/hour

Duration: 12 Months

Shift: 1st Shift - 9/80

Clearance: No Clearance Required.

Responsibilities

- Maintains configuration of the aircraft to Engineering requirements
- Provides guidance to Engineering regarding design concepts and specification requirements to best utilize existing equipment and manufacturing techniques
- Translates Engineering requirements into a product build package
- Collaborates with tool design on manufacturing requirements
- Controls the flow of parts
- Coordinates make vs. buy part decision
- Structures Manufacturing Bill of Material (MBOM)
- Defines sequence of operations and specifies procedures for product build
- Ensures manufacturing processes and procedures are in compliance with customer requirements
- Follows manufacturing processes that are applicable to statistical process control and supporting data collection.
- Uses established manufacturing engineering procedures for the fabrication of tools and equipment used to fabricate products
- Supports the build and test of product
- Clears constraints affecting production of aircraft
- Investigates and initiates corrective actions and improvements in product quality and efficiency
- Collaborates with tool design to ensure product build is repeatable
- Oversees the integration of aircraft assembly technologies and processes
- Provides technical solutions to a wide range of complex and difficult problems
- Experience integrating products from engineering design to manufacturing floor
- Provides detailed written instructions that help facilitate product fabrication

Basic Qualifications:

- 9 Years of Manufacturing Engineering experience with a Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university; 7 years of engineering experience with Master’s Degree in STEM and 4 years of Engineering experience with PHD .
- 9 years of experience providing technical manufacturing based expertise with a focus on design to cost principles without jeopardizing performance, safety and quality.

Preferred Qualifications:

- Experience reviewing and interpreting electrical wire diagrams
- Experience supporting aircraft hydraulic and/or fuel integration/maintenance
- Experience supporting enhancement processes that improve production shop floor efficiencies
- Experience reviewing engineering models during concept design phase to correlate the manufacturing desired final engineering model
- Good communicator, ability to provide product improvement proposals and present to manufacturing leaders and technical team for approval.
- Experience providing innovative techniques focused on improving product designs and tooling assemblies or equipment
- Experience supporting aircraft maintenance and/or flight test operations
 
Job Number: MB-1668
Job Location: Melbourne, FL
Rate: 48-55/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Everett, WA)

Description:
SEVERAL OPENINGS IN THE EVERETT/SEATTLE, AREAS.

Key Skill Needs:
• Experience leading control system design projects for aerospace and/or automotive industries.
• Experience with optimization process to improve safety, ergonomics, quality, flow, productivity, reliability, or maintainability of robotics or/and automation equipment.
• Experience with Programmable Logic Controllers (PLC’s), numerical control units (NCU’s), and motion control products and/or similar products from other major automation suppliers.
• Experience interfacing PLC’s with complex electrical, pneumatic, and hydraulic equipment.
• Familiarity with wireless, and wired industrial automation networks (CANBUS, Ethernet protocols, PROFINET/PROFIsafe, PROFIBUS, etc).
• Familiarity with building HMI’s using industrial software design packages and best practices for HMI design and usability.
• Familiarity with industrial safety devices (light curtains, interlock gates, laser scanners).
• Systems thinking and ability to isolate issues from a variety of interlinked systems.
• Familiarity with industrial robots and machines from well-known Original Equipment Manufacturers (OEM’s) (e.g. KUKA, ABB, Fanuc, Electroimpact, etc.)
• Experience with PLC and HMI installation, configuration, software debugging and testing, commissioning, and startup for major automation integration projects.
• Strong practical aptitude across multiple engineering fields. (e.g. electrical/controls engineering, mechanical engineering, software development, etc.)
• Experience utilizing knowledge of control system architecture and equipment log files to perform fault isolation and root cause analysis on issues caused by industrial equipment.
• Knowledge of software programming processes, including but not limited to version control, blockpoint packaging and releasing, etc.
• Proactive problem solving; visits shop-floor, asks questions, seeks relevant information, and data and input to solve problems effectively.

Preferred Systems Experience/Knowledge
• Siemens TIA Portal
• Siemens Step 7 PLC programming software
• Siemens WinAC RTX
• Siemens SINUMERIK 840 D SL System Maintenance and Programming
Siemens SIMOTION software
• Siemens HT8 and HMI Pro software
• Siemens WinCC Advance and WinCC Flexible HMI programming software
• Siemens SCALANCE industrial network switches X408, X308, X208, etc…
• Siemens Simatic IT software suite
• Sunrise AGV software
• Siemens PROFINET Primary Setup Tool
• SICK Safety Scanner Configuration & Diagnostic Software (CDS)
• Kepware or similar OPC software

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

ACS Group (formerly 'Comforce')
 
Job Number: EquipToolEngWA
Job Location: Everett, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 3+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facility Maintenance Engineer – Level 3

Description:
Location: Vandenberg Air Force Base, CA
Rate: DOE
Duration: 1 year contract
Shift: Not Specified
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description / Responsibilities:
The Facility Maintenance Engineer will support the maintenance and restoration of launch facilities in support of the Atlas V Launch Operations at Vandenberg Air Force Base California as part of our clients Engineering and Infrastructure Team. The successful candidate will provide management of all SLC-3 / Atlas V and other support facility activities, consisting of periodic maintenance and repair of launch facility and support building architectural, electrical, civil, structural and mechanical systems, including supporting facility corrosion control activities. Activities are performed by both contractor and company represented employees.

Candidate will coordinate the procurement of facility services, equipment, and furniture and perform a variety of engineering tasks in support of mechanical, electrical and structural facility maintenance. Candidate will perform investigation of anomalies encountered by maintenance personnel and be responsible for developing a corrective action plans and work documents for both company and contractor support. Will work with various government groups including Air Force and Base Civil Engineering personnel. Will specify and order various types of facility equipment.

The successful candidate shall prepare and obtain approval for Statements of Work with detailed contractor direction and manage contractor's activities for facility corrosion control, repair of building architectural systems, miscellaneous civil, structural and mechanical repairs for maintenance and repairs that are performed by external contractors.

In addition, the candidate will gather information, perform field walk-downs, and create, schedule, and manage the performance of maintenance and/or corrective Work Orders performed by Company represented personnel. Support will also include schedule integration and coordination of maintenance activities around launch processing activities. Candidate shall have relevant facility maintenance with an emphasis on architectural facility/building systems restoration and corrosion control.


Qualifications/Education:
- Bachelor's degree from an accredited college in Engineering or related discipline, or equivalent, with 10 years of professional experience.
- Experience with facilities engineering and plant operations.
- Experience working independently and in a team environment, with both represented and contractor personnel.
- Must have excellent communication, writing, and oral skiffs and have the ability to work with a wide range of team members including company represented personnel, customers, and subcontractors.
- Ability to solve practical problems.
- Able to analyze and interpret data to make sound judgments and recommendations.
- Ability to read and interpret mechanical and electrical drawings, logic diagrams, and technical manuals.
- Basic experience with AutoCAD, create/revise engineering drawings as required.
- Proficient knowledge in Microsoft Office Suite.
 
Job Number: 8970
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System Engineer

Description:
Role Description:



We are searching for a talented person to fill a Flight Control Engineer position located here in Moses Lake, WA. The strategic purpose of the Flight Sciences Group, and the Engineering Services Unit, is to provide engineering consulting services related to aircraft performance.



Job Duties and Responsibilities:

Review and support Certification activities.
Certification Plans.
Component Qualification Test Plans.
Similarity Analysis Reports.
Safety and Particular Risk Analysis.
Design Reviews.
Support flight testing activities.
Test Specification Definition.
Test planning and preparation activities.
Pre and Post Flight Briefing Support.
Live monitoring of flight data, typically via telemetry, exceptionally on aircraft.
Post flight data processing, analysis, and drawing conclusions.
Troubleshooting of aircraft snags, root cause determination and appropriate engineering disposition for way forward.
Appropriate disposition of non-conformances, quality escapes etc.
Safety of Flight determination.
Documentation of design problems for long term fix.
Release of engineering documentation for component changes and new installations, ensuring appropriate configuration control.
Generation and review of appropriate limitations documentation.
Flight Test Report Writing.




Requirements
Knowledge/Skills/Abilities

Intermediate knowledge of flight test operations and flight certification.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Able to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical and troubleshooting skills as well as decision-making skills.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Strong communication skills (oral, written, presentation) with both external and internal customers:
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees.
Able to publicly represent the organization to people who inquire about our company, our mission and our products (straight-forward, believable).
Strong project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Proficiency with Microsoft Project and/or other project planning software. Able to quickly learn new software and systems.
Software programming
Education

Four (4) year degree in Engineering (Electrical, Aerospace, Instrumentation, Avionics).
Experience

3-8 years relevant aerospace engineering experience
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Claderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Product Design Engineer 4 / CREO / CA

Description:
18000483/162029
Job Title: Ground Product Design Engineer 4
Job Category: Engineering

Work Site: Redondo Beach, CA 90278
Job Number: 1657
Max Pay Rate: 67.00
Start Date: ASAP
End Date: 12 Months
Position Type: Contract


Job Summary
Northrop Grumman is currently seeking a Design Engineer to support test set development for EPS-R. Position will require selected candidate to create, modify and maintain drawings of electrical test equipment which includes, but not limited to custom test units, custom drawers and test cables. The selected candidate will be responsible for drawing documentation, design updates and working with mechanical and electrical engineers. Selected candidate must be adept at working independently as well as in a collaborative team environment. Candidate should be able to communicate well verbally and written, and be attentive to detail.

Job Description

Qualifications and Education Requirements
•Minimum 5 years of experience working in industry
•Experienced in ProE/CREO
•Knowledge with electro-mechanical design/products

Preferred Skills
Clearance

•AutoCAD
 
Job Number: MB-1657S
Job Location: Redondo Beach, CA
Rate: 67/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Technician

Description:
The HVAC Technician’s primary function is to maintain, install, troubleshoot and repair all types of building equipment and HVAC / Electrical Systems to the customers' satisfaction. Assists other mechanics and technicians occasionally in aspects of building maintenance. Confer with customers to ensure completion of all tasks in a satisfactory manner.

Responsibilities:

> Maintain, install, and troubleshoot electrical equipment and HVAC systems.
> Perform general building and office repairs and office relocation tasks.
> Read and interpret blueprints and building drawings.
> Collect data on various types of equipment.
> Conduct periodic building walk-through to locate problems; perform minor carpentry, drywall and painting.
> Practice good housekeeping and safety standards & Total Quality principles and concepts.

Qualifications:

> 3+ years related experience with a high school diploma and/or related technical education and training.
> Chlorofluorocarbon (CFC) Certification is required
> Ability to troubleshoot and repair electrical systems AND HVAC systems.
> Ability to make general mechanical repairs.
> Good verbal and written communication skills.
> Ability to maintain a valid driver's license.
> Knowledge of HVAC principles and National Electrical Codes (NEC).

Mark A Ludwig
Vice President
Global American Staffing
Email: mludwig@globalams.us
Office: 508.230.5030 x123
 
Job Number: 018_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 12+/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Designer (5+ needed)

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Knowledge of Catia V5 is required.
• Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches.
• Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements.
• Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design.
• Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.
• 2D Drawing Design Preferred Job description: Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-259
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: YES
Overtime: YES
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Harness Installation Engineer

Description:
Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Duration: Long Term Contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project.
- Aerospace experience is required.
- Knowledge of Catia V5 is required.
- Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches.
- Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements.
- Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design.
- Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.
- 2D Drawing Design Preferred

Education:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:
Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 8857
Job Location: Savannah, GA
Rate: $58.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrument Engineer (OK)

Description:
Contract Instrument Engineer

Our Client in Ponca City, Oklahoma (Refinery) has a crude oil processing capacity of 203 MBPD. Both foreign and domestic crudes are delivered by pipeline from Canada, Oklahoma, Kansas and Texas. The refinery's facilities include fluid catalytic cracking, delayed coking and hydro-desulfurization units that enable it to produce high ratios of gasoline and diesel fuel from crude oil. Finished petroleum products are shipped by truck, rail and Company-owned and common carrier pipelines to markets throughout the mid-continent region. Operations are run 24 hours per day, seven days per week.

Major Products: Gasoline, Diesel, Jet fuel, Kerosene, Heating oils.

Capacities: Crude oil and Other Charge Capacity: 203,000 BPD; Gasoline Production Capacity: 110,000 BPD; Distillate Production Capacity: 85,000 BPD.

Description:
The Instrument Engineer is responsible for the design, engineering, and implementation of process instrumentation and control systems from initial conception through commissioning.

The Instrument Engineer is responsible for design and engineering that provide the most reliable and cost- effective instrument and control systems. The Instrument Engineer also provides consulting services to process engineers in developing process design specifications, develops operating and training manuals for mechanical and process personnel, and participates in training operating personnel.

The Instrument Engineer writes purchase and construction specifications and writes and performs Factory Acceptance Tests procedures.

The Instrument Engineer specifies, procures, and configures Distributed Control Systems, and field hardware such as transmitters, control valves, and electronic transmission systems.

The Instrument Engineer utilizes American Petroleum Institute (API) Standards, Instrumentation, Systems and Automation Society (ISA) Standards, National Fire Protection Association (NFPA), and Client standards and practices to perform the above functions..

Responsibilities may include:
• Instrumentation and controls capital projects engineering including front-end-loading, cost estimates, specifications and oversight of detailed design.
• Identifying areas where instrumentation/controls can improve plant operation and profitability
• Owning and leveraging the application of instrumentation safety standards, mechanical integrity, design, and maintenance.
• Functioning as Project Engineer on instrumentation and control system capital projects and large instrumentation maintenance projects
• Using documentation systems and processes which maintain accurate instrumentation equipment and control system information and drawings
• Supporting criticality assessments of the plant's instrumentation equipment
• Designing Refinery Safety Instrumented Systems (SIS) design and maintenance
• Performing Safety Integrity Level (SIL) analysis and engineering upgrades of safety instrumented systems
• Assisting in developing strategic plans for implementing/upgrading instrumentation and control systems
• Serving as a technical resource to properly identify new and existing equipment specifications and proper operating parameters/ranges for instrumentation equipment
• Overseeing application and interpretation of National Electric Code and other applicable city, state, federal codes and standards (e.g. NPRA, NFPA, API, ISA)
• Performing audits of instrumentation installations and process control loops including failure analysis inspections
• Interacting with engineering and construction contractors, both on-site and off-site
• Review instrument changes for Management of Change approval. Ensure that changes are properly designed and documented.
• Assist with training and development of operators, technicians, and engineers in order to high-grade skill sets with respect to the instrument asset base.
• Support DCS operator interfaces with respect to information presentation and abnormal situation management.
• Facilitate increases in unit availability, increases in product quality, and reductions in refinery maintenance costs by developing and maintaining reliability systems for the plant’s instrumentation assets. Provide leadership for implementation of these reliability systems.

QUALIFICATIONS
Basic/Required: (Remember, anything listed in this section is a qualification the candidate MUST have in order to be considered.)
• Must possess a bachelor's degree in Electrical Engineering, Chemical Engineering, Mechanical Engineering or Engineering Physics
• 3+ years of experience in a refinery and/or chemical industry
• 3+ years of direct experience in process instrumentation design and/or maintenance.

Preferred: (Candidates do NOT have to have all of the items listed in this section to be considered.)
• Knowledge of the Ponca City Refinery instrumentation asset base.
• Proficient in use of SAP - PM & PS Modules
• Demonstrated knowledge and experience designing and supporting Safety Instrumented Systems (SIS), Safety Instrumented Functions (SIF), Layers of Protection Analysis (LOPA), and High Integrity Pressure Protection Systems (HIPPS).
• Proficient in computer applications such as Word, Excel, Outlook, and MS Projects
• Expert knowledge of field instrumentation and controls through design and field installation experience
• Demonstrated knowledge and experience on Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS), preferably on Honeywell TDC3000 / Experion and FSC Safety Managers.
• Demonstrated knowledge on Process Analyzers, Chromatographs, and Gas Monitoring Systems.
• Demonstrated knowledge and use of SPI (InTools) database and specifications
• Strong analytical skills including statistical analysis
• Strong interpersonal and written communication skills
• Ability to lead execution of work and resolve issues in a team environment
• Accepts ownership, is accountable, and delivers on commitments
Ability to work in cross-functional teams

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-81018-2OKPCR
Job Location: Ponca City, OK
Rate: $ BOE/HR
Per Diem: Possible Split
Overtime: Possible
Duration: 11 Months or longer
Start Date: 10/01/2018
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration & Test Engineer IIII

Description:
Apply now for our client's engineering position in Massachusetts!

Mandatory Qualifications and Experience:
* BS degree in Electrical/ Computer Engineering / Computer Science or related field Experience developing medium to large scale applications in NI TestStand
* Experience developing and supporting medium to large projects in NI LabVIEW Knowledge of process models
* Experience with Source Code Control Effective communication and organizational skills
* Must be eligible to obtain a secret clearance and have at least an interim secret security clearance prior to start.
* Ability to learn and understand RF and microwave test equipmen
* Experience with NI TestStand and NI LabVIEW Knowledge of common architectures such as functional globals/action engines, state machine, producer-consumer, event structures, queued message handler
* Experience or ability to learn how to write drivers to interface to test instrumentation Knowledge of LabVIEW OOP
* Knowledge of with Git source control Experience with VIs in LabVIEW
* Knowledge of documenting code and developing modules that can easily be shared with other developers, and used across multiple projects

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 128510
Job Location: Chelmsford, MA
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Systems Design Engineer

Description:
Description:
Lead the effort to create a top tier integration and test facility including procurement of all necessary hardware, tools, and equipment
Lead and empower your team to test and integrate a novel electric aircraft
Develop testing methods and procedures
Execute tests and document test results
Own the vehicle integration
Assist the engineering team and flight test team as required
Maintain records of components, installation procedures, and changes in accordance with standard quality procedures
Effectively communicate engineering intents with your team and integration issues with engineering
Assist with tracking milestone accomplishments including integration status
Requirement:
Experience designing an integrating a variety of aircraft systems - hydraulic, electrical, fuel, ECS, flight controls, etc.
VTOL experience a plus
Experience with light aircraft preferred.
Experience with CAD - Catia V5, NX, etc.
Familiarity with measurement systems, equipment, and sensors
A strong technical understanding of aircraft integration, testing, and quality control
A high degree of understanding of proper practice and safety in working with high voltage electronic systems
At least five years of engineering experience
Experience in a rapid prototyping environment
Excellent communication skills (strong coordination and relational skills to deal with customers, authorities, internal and external partners)
Experience with leading diverse teams
A Bachelor's degree in a relevant subject or equivalent experience - Aerospace, Mechanical, etc.


The Structures Company is an AA/EOE.
 
Job Number: 230
Job Location: ORE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer – Level 2

Description:
Location: Moorestown, NJ
Rate: $80.00 - $90.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Exempt
Per Diem Split: Possible

****MUST BE A U.S. CITIZEN****
****MUST HAVE AN ACTIVE SECRET CLEARANCE OR TO HAVE HAD ONE WITHIN THE LAST 2 YEARS****


Job Description:
- The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
- This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
- This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
- This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
- This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
- The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.


Skill/Experience/Education
Mandatory:
****MUST HAVE AN ACTIVE SECRET CLEARANCE OR TO HAVE HAD ONE WITHIN THE LAST 2 YEARS****
- BS Degree in Electrical Engineering or Electrical and Computer Engineering.
- Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
- Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
- Configuration management and change management experience using ClearCase, ClearQuest and UCM.
 
Job Number: 9358
Job Location: Moorestown, NJ
Rate: $80.00 - $90.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Laser / Infrared Electronic Hardware Engineer (419)

Description:
*This is a full time, 6 month, contract to hire position, located in Nashua, NH



We are seeking a lead electronic hardware engineer who will be designing, developing, integrating, and testing (whole life cycle) of military Infrared, optical and laser equipment. Much of the work will be involving working with electronic circuit boards and cards, FPGA and CPLD designing (Xilinx and Lattice), analog, digital and mixed signal interface designing, incorporating legacy design, component selection, lab testing, etc.



Required:
*Applicants must be eligible to obtain a Secret Clearance, requiring US Citizenship, in order to apply.
*8-12 years’ experience in Electrical Engineering working with lasers, infrared or other detection/imaging/camera equipment.
*Knowledge of digital/analog or mixed signal technologies.
*Familiar with electronics, preferably circuit board or card factory testing
*Military/DoD work environment experience
*Strong “hands-on” lab experience with instrumentation, equipment, and processes
*Familiar with interface standards including military/avionics communication buses (i.e. RS-485, Mil-Std-1553B, Ethernet)
*BSEE or equivalent



Pluses:
* Experience with XILINX & Lattice FPGA developments and toolsets; JTAG knowledge
* Life cycle engineering related to diminishing manufacturing sources/material shortages (DMSMS)
*MATLAB/Simulink tool experience
*Active or interim Secret Clearance (or active within last 2 years)
 
Job Number: 419
Job Location: Nashua, NH
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liaison MRB Engineer / Product Review Engineer III - (AL)

Description:
• Develops dispositions for previously fielded, unserviceable items utilizing Interactive Electronica Technical Manuals (IETM), Depot Maintenance Work Repairs (DMWRs), engineering drawings and/or process specifications.
• Applies broad knowledge of Boeing design and/or engineering principles.
• Develops and implements product/process improvements.
• Communicates engineering serviceability issues with Integrated Product Teams (IPT) and participating in design reviews.
• Uses innovative approaches and unique applications to address complex unserviceable conditions and to detect deviations.
• Utilizes basic static strength analysis to design interim and/or structural repairs.
• Analyzes reported problems for potential safety issues; recommends and manages complex resolution.
• Leads development of interim and final dispositions.
• Represents the engineering community in the build through post production environment.
• Ensures supplier and build partner compliance with Boeing standards.
• Develops customer correspondence for continued safe operation and maintenance of equipment.
• Supports supplier activities for on-site disabled product repair teams.
• Ensures supplier and build partner compliance with Boeing standards.


This position requires direct engineering support at an off-site supplier for the depopulation efforts which remove previously fielded (used) major assemblies, sub-assemblies, and detail components from the Apache rotorcraft. They are inspected and dispositioned with the intent of repairing/restoring to a serviceable condition; these items are then modified by the primary integrator (Boeing-Mesa), then re-installed on the aircraft. The components vary in terms of the state of serviceability, and component type; they consist of both primary and secondary, metallic and composite bonded structures, pneumatic and hydraulic systems, flight safety related components, and armament sub-systems.

Preferred Qualifications:
• Previous Material Review Board (MRB) experience preferred.
• Universal Product Review (UPR) preferred
• Previous experience with Depot Maintenance Work Requirement (DMWR) and/or Interactive Electronic Technical Manual (IETM) highly desired.
• Ability to learn in a fast-paced environment.
• Ability to collaborate with other engineers (both face-to-face, and via remote correspondence) and factory-floor mechanics.
• Develop and implement product/process improvements.
• Develop customer correspondence for continued safe operation and maintenance of equipment.

Bachelor's degree and typically 5 or more years' experience in an engineering classification, or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Bachelor, Master or Doctorate of Science degree from an accredited course of study in Mechanical, Aerospace / Aeronautical, Civil, or Electrical engineering. ABET is preferred.
 
Job Number: MRBal
Job Location: Huntsville, AL
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 10-12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP &P Engineer 4

Description:
MP&P Engineer 4

Location: Huntington Beach, CA
Duration: 6 months

Description:
This position requires a candidate with experience in parts management & component engineering of electrical, electronic, & electro-mechanical (EEE) parts used in space, man-space, launch vehicle, missile, Navy shipboard navigation and sensors, and military & commercial aircraft applications.

This position also requires some knowledge in the failure mechanisms of EEE parts, the use of plastic encapsulated microcircuits/devices (PEMs & PEDs) and automotive grade AEC parts qualified for high-rel military and space applications. Lab experience in failure analysis of EEE parts is a plus.

Responsibilities include the following:
- Lead teams
- Project management of parts, materials, and process (PM&P) tasks
- Develop & maintain PM&P plans for EEE parts and electrical materials & processes (M&P)
- Support the electrical design engineer in the part selection process and reviewing the parts list to ensure requirement compliance to the PM&P plan
- Develop & maintain specifications including screening & qualification plans
- Review & approve screening data & qualification conformance inspection (QCI) reports and destruct physical analysis (DPA) reports
- Develop & maintain non-standard part approval requests (NSPAR)
- Coordinate with component engineering subject matter experts (SMEs) in the development & qualification of complex EEE parts
- Provide subcontractor oversight compliance in review and approval of PM&P plans, part lists, NSPARs, part specifications, qualification plans, & part derating reports
- Perform GIDEP reviews, part obsolescence assessment & resolution, & part counterfeit mitigation assessments
- Manage part failure resolution and coordinate with electrical failure analysis lab to determine root cause of failure & corrective action
- Support design reviews & equipment buy-off (FCA/PCA)

Education / Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code:
6B2-Electrical PM&P
 
Job Number: 18-12571
Job Location: Huntington Beach, CA
Per Diem: Split
Overtime: possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MP&P Engineer 4

Description:
seeking 2 MP&P Engineer 4 's for an opening in Huntington Beach, CA.

RESPONSIBILITIES:
This position requires a candidate with experience in parts management & component engineering of electrical, electronic, & electro-mechanical (EEE) parts used in space, man-space, launch vehicle, missile, Navy shipboard navigation and sensors, and military & commercial aircraft applications.This position also requires some knowledge in the failure mechanisms of EEE parts, the use of plastic encapsulated microcircuits/devices (PEMs & PEDs) and automotive grade AEC parts qualified for high-rel military and space applications. Responsibilities include the following:
• Lead teams
• Project management of parts, materials, and process (PM&P) tasks
• Develop & maintain PM&P plans for EEE parts and electrical materials & processes (M&P)
• Support the electrical design engineer in the part selection process and reviewing the parts list to ensure requirement compliance to the PM&P plan
• Develop & maintain specifications including screening & qualification plans
• Review & approve screening data & qualification conformance inspection (QCI) reports and destruct physical analysis (DPA) reports
• Develop & maintain non-standard part approval requests (NSPAR)
• Coordinate with component engineering subject matter experts (SMEs) in the development & qualification of complex EEE parts
• Provide subcontractor oversight compliance in review and approval of PM&P plans, part lists, NSPARs, part specifications, qualification plans, & part derating reports
• Perform GIDEP reviews, part obsolescence assessment & resolution, & part counterfeit mitigation assessments
• Manage part failure resolution and coordinate with electrical failure analysis lab to determine root cause of failure & corrective action
• Support design reviews & equipment buy-off (FCA/PCA)

REQUIRED EXPERIENCE:
Lab experience in failure analysis of EEE parts is a plus.

EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

FULL TIME/FIRST SHIFT
WORK HOURS: 8:00 AM - 5:00 PM

TRAVEL: YES
Some travel required to support design reviews and visit suppliers within the continental US.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 172801
Job Location: Huntington Beach, CA
Rate: $73.45 - 85.45
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Design Engineer

Description:
The Manufacturing Engineer position is part of the ME Design Engineering team and is responsible for providing Electrical / Avionics technical support in the areas of manufacturing, design, development, and testing.

5 Engineers needed

Duties and Responsibilities:
1. Take complete ownership of assigned A/C area(s).
2. Approve all tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies.
3. Analyzes statistical data including process capability studies, tests capability studies, and through-put rates.
4. Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable.
5. Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions.
6. Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments within Honda Aircraft Company.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors' degree in Manufacturing Engineer or other related field strongly preferred.
• In lieu of bachelors’ degree, management may elect to consider candidates with a combination of work experience, education, and formal training.
2. 5+ years of directly related work experience within a Manufacturing or Production Engineering design team is required.
3. Previous project engineering and/or project management experience preferred.
4. Six Sigma Certification is a plus.
5. Experience in estimating/ quoting machine/ assembly hours and tooling costs a plus.
6. Experience in supplier selection and management including directing/ addressing supplier concerns from a technical standpoint.

Knowledge, Skills and Abilities:
1. Proven knowledge of wiring harness manufacturing.
2. Proven ability to define standard electrical and avionics methods for installation/testing and the prevention of damage.
3. Proven ability to trouble-shoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance.
4. Knowledge of AS9102 processes, procedures, and methods a plus.
5. Knowledge of Garmin Avionics Systems a plus.
6. CATIA V5/V6 experience is a plus.
7. Router/ Work Instruction Creation and Maintenance in an advanced ERP/MRP system
• SAP experience is a plus.
• Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus.
8. 3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of detail parts, assemblies, and installations.
9. Ability to analyze a variety of engineering data to help determine how to meet company objectives.
 
Job Number: 28-029
Job Location: Greensboro, NC
Rate: Up to $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Electrical Engineer - Avionics

Description:
Job Description
• Provide technical interpretation of drawings and specifications of complex products
-Provide process input for producibility and standard work
• Works with Design Engineers to analyze and resolve design tolerance problems. Coordinates design changes or improvements with Design Engineering and change control board
• Evaluate failure data for trends, track and manage defects and first pass yield.
• Provide capacity planning and utilization analysis for accurate staffing and test equipment needs
• Eliminate/reduce test defects and improve test yields. Perform root cause analysis and take corrective action to resolve test failures.
• Support test equipment performance and troubleshooting reliability issues
• Use and application of standard engineering and manufacturing principles and processes
• Develop solutions to technical problems of moderate scope and difficulty
• Develop, implement and maintain test methods and processes in the manufacture and test of sub-assembly, module, and top level product for a moderately difficult product line
• Determine proper test flows and sequencing for the efficient flow of product
• Provide technical assistance and training support to floor test technicians
• Maintain test documentation in current configuration and oversee accurate change management procedures for test documents
• Analyze manufacturing test processes for cost reduction opportunities
• Develop working knowledge of difficult test systems and hardware
• Provide technical assistance and support to sub-assembly and top-level testing.
 
Job Number: RC 14178
Job Location: Portland, ORE
Rate: $55
Per Diem: split
Overtime: yes
Duration: 6 mos
Start Date: 08/20/2018
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Lary O'Keefe
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Project Manufacturing Engineer



Location: Rockford, IL



Job Information

Job Description





We are looking for an energetic and dedicated individual to operate in an entrepreneurial product development area of Electric Systems’ leading edge technology line of Embedded Controls.

POSITION SUMMARY:

A Project Engineer is needed to lead, execute and direct all aspects of the development, design, testing, and field deployment for Embedded Control Units in aircraft electrical systems. This includes: Leading/directing the efforts of a cross functional engineering team for all engineering development and test activities. Teams could include systems, software, electrical, packaging and test equipment engineers. Being the key technical interface between Program Management / Functional Management/External Customers. Develop and track engineering plans, schedules and budgets. Define, tailor and manage the engineering product development process including coordinating the conduct of internal technical reviews, external technical reviews and program milestone reviews such as PDR and CDR. Responsible for identification of technical and project related risks; development and execution of risk mitigation strategies. Contribute technically including some or all of the following: Development of DO254 planning documents, definition and flow down of requirements from customer specification to module level; development of architecture/solutions to meet customer's requirements; development of system and controller test strategies and plans. Support the Program Manager for: planning the overall program; securing and allocating resources from the engineering functional managers; reporting program status to the customer and management; satisfying contract requirements and deliverables and providing EVMS status and variance report.


Job Responsibilities:

- Dynamically lead for all program, technical, schedule and budgetary activities required in achieving total satisfaction within the internal and external customer base
- Lead and mentor team members of a cross functional engineering project team


Education





Bachelor of Science in engineering required; advanced degree in engineering and/or business desired.

Experience





- 3-5 years’ experience, preferably in a fast-paced aerospace environment
- Familiarity with electrical engineering concepts and embedded controls is required
- Basic working knowledge of control systems is highly desirable
- Excellent organizational, planning, oral and written skills are necessary along with the ability to work in a team environment
- Applicants should demonstrate strong leadership qualities



Comments





MINIMUM QUALIFICATIONS:
- 3-5 years experience in aerospace
- Bachelors degree in Engineering
- Basic working knowledge of control systems







Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54650
Job Location: Rockford, IL
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - Electrical / Electronics - (PA)

Description:
Assists in the development and implementation of production and tooling methodologies. Participates as a member of an Integrated Product Team (IPT) in the integration of technical solutions. Works with others to develop, identify and implement conceptual designs and maintenance of the program architecture for build. Assists in implementing manufacturing plans. Resolves technical problems and assists in the implementation of new engineering principles, theories, advanced technologies and concepts. Assists in the implementation of Lean principles and technologies. Interfaces with professional associations, suppliers, IPTs and internal customers to develop products, skills, knowledge and experience.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Additionally ABET is the preferred, although not required, accreditation standard.

Experience with Bill of Material, manufacturing processes, assembly and integration work instruction. Experience with Microsoft Office, Excel and PowerPoint. Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM). Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.
 
Job Number: MFGEpa
Job Location: Ridley Park, PA
Rate: up to $38/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Planner I & II - Electrical/Electronics - (PA)

Description:
Develops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Assists with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements. Assists in reviewing supplier data to ensure manufacturing related requirements are met. Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements. Assists in tooling dispositions. Investigates and resolves manufacturing related issues of limited scope. Assists with producibility assessments for part or product designs. Assists in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules. Develops work statements and sequencing of events to support delivery commitments. Assists in the review, maintenance and monitoring of internal documents. Works under general supervision.

AA degree in related discipline and typically 1 or more years of related experience or an equivalent combination of education and experience.

Experience with Bill of Material, manufacturing processes, assembly and integration work instruction. Experience with Microsoft Office, Excel and PowerPoint. Experience with the following systems: Product Data Manager (PDM), Online Work Instructions (OWI), and Nonconformance Management (NCM). Experience using 3D Computer Aided Design Tools; CATIA V5 preferred.

ACS Group (formerly 'Comforce')
 
Job Number: MFGPpa
Job Location: Ridley Park, PA
Rate: up to $30/hour
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing or Process Engineer (169)

Description:
*This is a full time, 1 year, contract position based in Lexington, MA*



We are hiring for a shop floor manufacturing engineer who has some background in electronics or mechanical assembly.



Candidate will directly work with floor technicians and operators to resolve line issues and develop and improve process instructions, route cards, tooling, methods, and processes necessary to meet our production quality, delivery, and cost objectives.



Typical daily duties may include working with assemblers, testers, and inspectors as well as with design engineering to solve a variety of simple to complex manufacturing problems. Will work on capacity planning, production floor layouts, help with capital equipment requirements forecasting, develop ROI analysis, continuous improvement edicts, root cause analysis, value steam mapping, performance metrics, etc.



Required:
*5 years’ experience working as a manufacturing or process engineer in aerospace or defense manufacturing.
*Experience utilizing Oracle, PDM, TipQA, Shop-floor and similar floor operating systems.
*Understanding of LEAN Manufacturing principals
*Familiar with 7-S and Continuous Improvement (AS9100 or similar)
*Strong electrical test knowledge
*4 year engineering or equivalent degree (BSME or BSEE preferred)
*Able to get a Secret Clearance upon starting, must be a US Citizen (we help with this process)



Preferred:
*Active Secret Clearance
*Bonding experience
*High speed signals, fiber optics, high voltages and energetic device knowledge
 
Job Number: 169
Job Location: Lexington, MA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing/Electrical Eng

Description:
Job Description
• Provide technical interpretation of drawings and specifications of complex products
​-Provide process input for producibility and standard work​
• Works with Design Engineers to analyze and resolve design tolerance problems. Coordinates design changes or improvements with Design Engineering​ and change control board​
• Evaluate failure data for trends​, track and manage defects and first pass yield.
• Provide capacity planning and utilization analysis for accurate staffing and test equipment needs
• Eliminate/reduce test defects and improve test yields. Perform root cause analysis and take corrective action to resolve test failures.
• ​Support test equipment performance and ​troubleshooting reliability issues​
• ​U​se and application of standard engineering and manufacturing principles and processes
• Develop solutions to technical problems of moderate scope and difficulty
• Develop, implement and maintain test methods and processes in the manufacture and test of sub-assembly, module, and top level product for ​a​moderately difficult product line
• Determine proper test flows and sequencing for the efficient flow of ​product​
• Provide technical assistance and training support to floor test technician​s​
• Maintain test documentation in current configuration and oversee accurate change management procedures for test documents
• Analyze manufacturing test processes for cost reduction opportunities
• Develop working knowledge of difficult test systems and hardwar​e​
• Provide technical assistance and support to sub-assembly and top-level testing.
• May provide Material Review Board analysis and disposition of Rockwell Collins and/or supplier products
• Individual job duties may vary

Must have requirements
·Candidate shall have a BS degree or greater in Electrical Engineering.
·Candidate should have experience in programming C#.
·Candidate should have production floor support experience or 3-5 years production experience​
-six-sigma/APQP training and experience desired​.
·Detailed production analysis using Matlab and/or Minitab desired.
1. Q: Main question is what is the purpose in including C# & Matlab. Will they be doing software development? For product or process? Are they using these languages to test product?
A: they will not be developing code but they might need to go into code and understand how to make small changes to the programs. Then they will have to load it on to the test station.

2. Q: What is meant by “production floor support” in the qualifications. What specifically would they like to see in terms of support?
A: all of the documents we are creating are for things that exist on the production floor and they are our customer. We would like to see someone who communicates well with test technicians, and can take their input on what they need in the way of documentation to do their job within the Rockwell requirements.
 
Job Number: 178
Job Location: Wilsonville, ORE
Rate: open
Per Diem: yes
Overtime: yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Barbara
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it?s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Requirements:
> 7+ years? work experience in computer aided drafting with an Associate?s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus

***This definitely isn?t your typical ?contract? assignment as it comes with six (6) paid holidays, accrued Paid Time-Off (PTO) and the option for medical, dental and vision plans through my company***
 
Job Number: 023_2018
Job Location: Hanover, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical/Electrical Tech

Description:
AIRCRAFT MECHANIC









The manager is looking for an AIRCRAFT MECHANIC

This individual will spend the first two months of the contract in Oak Harbor, OH and the third month in Columbus, OH.



A founding mission guides Battelle. We invest our knowledge, talents, and resources, helping our customers achieve their most important goals. We apply scientific rigor and creativity, succeeding where others may fail, and we invest in our communities, making the world better for generations to come. All of us share a common purpose: to solve the greatest challenges of today and tomorrow.

We are currently seeking an Aircraft Structural Mechanic. The selected candidate will perform a variety of operations to assemble and make major assembly structures, including fuselage panels and bulkheads. This a short-term 90-day position with a potential to be extended. The work will be performed at Oak Harbor, Ohio for the first 60 days and in Columbus, Ohio for an estimated 30 days. Primary work function would to install rivets and other fasteners onto Military Aircraft system.



Essential Functions:

"Read and understand blueprints

"Basic sealant application

"Translate blueprints into fabrications of structural assemblies to include: precision drilling, countersinking, and the use of calibrated tools

"Aligning parts on jigs using templates and fixtures

"Performing part-fitting operations: filing sawing, burring, crimping, trimming, framing, riveting, drilling and reaming

"Measures parts with micrometers and calipers to verify dimensions

"May modify incomplete and complete assemblies to incorporate changes to structure and verify quality in accordance with statistical process or other control procedures

"Required ability to perform moderately strenuous physical and repetitious work to include: bending, stooping, kneeling, lifting, and working overhead

"Must be able to lift over 25lbs

"Must be able to access small confined spaces and work in an enclosed environment



Basic Qualifications:

High School diploma or GED equivalent

Must be able to pass medical/respiratory assessments

A&P Certification preferred but not necessary



Our 22,000 employees work at the forefront of scientific innovation to tackle critical challenges in security, human health, manufacturing, energy, and environmental management. Battelle's work is grounded in the belief that science, technology, and a passion for excellence can make industries more competitive and the world a better place.
 
Job Number: 18-32084
Job Location: Columbus, OH
Rate: 0.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2018-11-14 00:00:00.0
Start Date: 2018-08-15 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Aaron Ludwig
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
OPERATIONS PROJECT MANAGEMENT

Description:
JSG is seeking a Operations Project Manager for a DIRECT HIRE Opportunity for our client in Los Angeles, CA!

Position Summary:
Systems Project Manager will act as project leader for multiple project teams. As project leader, the Systems Project Manager will coordinate activities of the project design team and production personnel, and also be the point of contact for communication with the customer.


Duties

Project management role from purchase order to shipment. Project management includes: setting and meeting project parameters such as cost, schedule, performance, and deliverables.
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.
Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.
Cost estimation includes estimation of NRE, RE, assembly, testing and materials.
Project schedule development using critical path method covering all tasks from PO to shipment including those for which others are responsible for performing.
Post-booking activities include: detailed design and documentation for custom portions of specific projects, re-using existing hardware and software subassemblies as much as possible to minimize engineering content of complete delivered system.
Prepare, schedule and conduct design reviews with customer, engineering and operations.
Implement change orders to accommodate change of project scope.
Weekly customer communication to report on progress, schedule status, and when necessary delays and schedule recovery plans.
Coordinate acceptance test requirements, sample materials, laser application, machine readiness, customer visit schedule, and lab resources for acceptance tests. Manage acceptance test and handle all exceptions necessary to secure customer sign-off.

Requirements:
5 years of experience managing technical projects in factory automation, laser processing or related industry.
Current Project Management Professional (PMP) certification.
Four-year degree in Mechanical, Electrical, Software or related Engineering curriculum.
5 years of experience managing technical projects.
Demonstrated experience in successfully driving and delivering projects (on time, on budget and to customer satisfaction).
Communicate well orally and in writing with customers and others with whom he/she works with within and outside the Engineering department.
Experience with project management tools including MS Project, Visio, Excel, Word.
Ability to travel occasionally. (2 weeks per quarter)
 
Job Number: 367432
Job Location: LOS ANGELES, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Designer

Description:
• Responsible for PCB designs from conception to manufacturing including library part creation, schematic capture, component placement, routing, Gerber / ODB++ file creation, and all documentation using the Mentor Graphics Toolset including CES and the RE routing environment, both in Board Station and Expedition.
• Designs include printed wiring boards as well as flex assemblies and rigid-flex assemblies.
• Responsible for interfacing with electrical, mechanical, and producibility engineering disciplines to ensure that the overall design requirements are captured and accomplished.
 
Job Number: 8320699
Job Location: Tewksbury, MA
Per Diem: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: John Ryan
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PWB Designer Mentor Graphics (648)

Description:
*This is a full time, 9-12 month contract position located in Archbald, PA*



We are seeking a mechanical designer who is a strong board level schematic designer. Candidate will be doing layouts of electrical schematics for printed wiring boards using Mentor Graphics Expedition, DxDesigner and Design Capture tools, in addition to some Pro/E, CREO also.

Candidate will compile info (from engineering, tooling, manufacturing and planning groups), perform calculations, and prepares layouts. Applicant will coordinates design criteria to ensure ease of manufacturing, availability of materials, and contractual specifications.

Required:
*4+ years experience in PWB layout using Mentor Graphics Expedition
*Experience using Mentor Graphics Design Capture or DxDesigner Schematic tool.

Pluses:
*Experience with CREO schematics
*Familiar with AutoCad electrical drafting
*Some experience in mechanical drafting
 
Job Number: 648
Job Location: Archibald, PA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Preventative Maintenance Supervisor

Description:
Preventative Maintenance Supervisor

Plans, organizes, and directs the overall preventative maintenance program for production machinery and equipment. Compiles and reviews various reports, logs, charts, corrective action lists, etc. to identify and prioritize maintenance and repair assignments to resolve production equipment issues. Develops standard operating procedures and maintains maintenance records for production equipment, including downtime, repair costs, spare parts, reliability studies, and 'mean time before failure' (MTBF) analysis. Prepares budgets for supplies, spare parts, staffing, and contracted services.Assists in preparation of capital expense budgeting and generates continuous improvement and cost reductions ideas. Communicates with other production departments and shifts in order to maximize work order completion and machine up-time.Performs root cause analysis in determining cause of equipment breakdown. Reviews associate performance and provide appropriate feedback and counseling for continuous improvement.

Desired Qualifications:

  • At least five (5) years of related maintenance and machine repair experience and three (3) years of supervisory experience--preferably in a high-volume manufacturing environment--are required.

  • Proven experience in managing multiple projects, objectives, and deadlines—preferably for preventative maintenance programsRelated Bachelor degree, or equivalent, is strongly preferred.

  • Proven experience in managing multiple projects, objectives, and deadlines—preferably for preventative maintenance programs.

  • Excellent leadership and communication skills are essential.

  • Working knowledge of 440 or 480 three-phase electrical/electronic systems, electronics/robotics, mechanical, hydraulic, pneumatic equipment and systems is required.Operational knowledge of precision measuring instruments, gauges, test equipment, and blueprint reading is also required.




Salary Positions



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 

 


 
Job Number: 18-29697
Job Location: St. Mary s, OH
Rate: 85000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2018-07-18 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Aaron Ludwig
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Electrical Engineer

Description:
Description:

Acts as lead designer/systems electrical engineer responsible for designs, tests, and analysis of mixed-signal/analog circuits for use in Space applications. Must be fully proficient at design and Worst Case Analysis (including radiation effects and single event upsets) and trouble shooting and root cause determination. Must be able to lead a small team and interact with xternal supplier developers while conducting their own detailed design work. Must be able to decompose requirements and interact with other electrical/controls disciplines to realize a mature design.

Product support of CCA, assembly, box and unit test required. May use computer-assisted engineering and design software and equipment to perform assignments. Applies principles and techniques of electrical engineering to accomplish goals. Requires a bachelor's degree in engineering and at least 10+ years of direct experience in the design and analysis of space electronics.

Demonstrates expert capability in a variety of the field's concepts, practices, and procedures. Relies on extensive experience and judgment to plan and accomplish goals. Performs a variety of tasks related to detailed design, cost and schedule management, and status reporting. May provide consultation on complex projects and is considered to be the top-level contributor/specialist. A wide degree of creativity and latitude is expected. Typically reports to a Project Engineer, manager, or head of a unit/department.



** MUST BE US CITIZEN **
 
Job Number: 18-28871
Job Location: Glendale, AZ
Rate: 56.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2019-05-16 00:00:00.0
Start Date: 2018-08-20 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split or Relocation: No


****MUST BE A U.S. CITIZEN****
****MUST HAVE A BACHELOR'S DEGREE****

Job Description:
Integrated Product Development (IPD) team lead, responsible for design, development and certification of space life support equipment. Responsibilities include managing a cross functional team through the design process, holding design reviews, managing documentation including customer data items, tracking schedules and budgets.

The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance.

Requirements:
- Project Engineer with a background in Aerospace, Mechanical, Electrical or Chemical Engineering with 7 years minimum of experience in Space, Aerospace or Defense.
- Must have experience leading IPD Teams in the creation of new designs for aerospace, space or military products.
- Must have experience with SAP and understanding or processing hardware in concert with SAP.
- The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans.
- Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions.
- Planning, execution, coordination and communication of team activities and commitments
- Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
- Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
- Ensure targeted goals (schedule and cost) is communicated to the team members
- Identify, assess and manage the team’s risks
- Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
- Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
- Meet design and design-to-cost requirements.
- Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.
- Project Engineers shall work to Company Standard Work and Procedures.
- Notifying the PEM immediately of any potential scope or ETC growth before the work is executed.
- Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements.
- Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
- Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
- Assist in creating program directives that define Earned Value Plans.
- Status plans and recommends corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.
- Coordinate, track and support development and flight hardware build and test.
- Initiate in scope engineering changes working with all functions to implement approved changes.
- This will include marking drawings, copying prints, creating PDF’s to support UTAS electronic EC processes.
- Document activities and programs worked with time spent on various activities.
- This information will be submitted weekly and summed monthly by person with the monthly invoice.
- Some limited program travel may be required.
- Overtime up to 12 hrs/week may be authorized
 
Job Number: 9416
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RMS ENGINEER

Description:
JSG is looking for a RMS Engineer for a 15+ months contract opportunity in Pax River, MD!

Description:

Support daily event entry into the Failure Reporting, Analysis & Corrective Action System (FRACAS) database via review of operations, test logs and NAVAIR maintenance databases; capture event evidence via interviews with maintainers, pilots, Marine maintainers, photos, test/data logs, etc.

Ensure tagging/isolation of parts for Root Cause /Corrective Action analysis via working with Quality and IPT members and to ensure proper component disposition prior to return to Supplier / Company.
Support daily updates of parts status and management process to ensure timely root cause analysis and return to supply chain.

Support daily joint preliminary-scoring with NAVAIR team members. Must be comfortable building relationships with customer and hourly-workforce.

A.S. degree in Mechanical, Electrical or Aerospace Engineering, preferred but not required and may be waived if candidate has sufficient practical experience, such as the following:
Military maintenance background on H-53 aircraft is preferred.
R&M FRACAS, failure analysis experience preferred, but is not required.
Previous commercial A&P or military aircraft maintenance
• Previous experience in aircraft test operations support.
Must be a self-starter and work independently, requiring a minimum of supervision.
Must be comfortable building relationships with customer and hourly-workforce.

Must possess skill level capable of performing tasks required to support the FRACAS program.

Must possess excellent written and oral communication skills.• Computer familiarity with Microsoft Word, Excel, PowerPoint, Picture Manager (or similar photo imager tool) and Outlook.
Position may require some overtime and/or support of second or third shift and/or occasional weekends in support flight test and maintenance schedules.

Ability to get Yankee White Security clearance is also preferred, but not required
 
Job Number: 367137
Job Location: Pax River, MD.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer (001)

Description:
*This is a full time, 10 month, contract position located, in Grande Prairie TX*



We are seeking a lead Reliability Engineer who will be working on our DoD/military Electronic Warfare systems. The candidate will be creating reliability predictions for mechanical and electrical design as well as Failure Mode and Effects, and Criticality Analysis (FMECA), working with reliability program growth plans, conducting reliability growth analysis, Corrective Action Boards (CAB) and Failure Review Boards (FRB).



Daily duties may include supporting design reviews and test activities, working with Corrective Action Boards (CAB) and Failure Review Boards (FRB), identify Failure Review and Corrective Action System (FRACAS) trends to identify and prioritize failure modes to investigate for corrective actions, review Engineering Change Proposals (ECP), support Concept Screening Board (CSB) and Configuration Control Board (CCB). There will be a good portion of the time spent on providing inputs to engineers, performing analyses, and writing reports



Required
*7 years’ in Reliability Engineering; particularly performing reliability predictions, root cause analysis, corrective action boards (CRBs) and Failure Review Boards (FRBs).
*Experience using FRACAS and FMECA analysis
*Experience in Human Factors, and/or Testability/Built-in Test (BIT).
*Experience with Windchill Quality Solutions Reliability software tool or equivalent.
*Ability to manage subcontractors in Logistics field of expertise.
*Able to give presentations in front of large groups.
*Active Secret Clearance; must be noted on top of resume.



Pluses
*4 year ME or EE degree
*Electronic Warfare systems experience
*Experience with Reliability Centered Maintenance (RCM).
*Military /Subcontract experience.
*Experience in Human Factors, and/or safety engineering
 
Job Number: 1
Job Location: Grande Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
S&C Engineer

Description:
We are searching for a passionate and dedicated S&C Engineer for a position located here in Moses Lake, WA to

review and support Certification Activities, including but not limited to:
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, AFHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in Systems Design Reviews.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Coordinate with certification authorities to seek clarification on requirements.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Support Flight Testing Activities, including but not limited to:

Help determine test specification definition.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefings.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.
Flight Sciences:

Supply expertise in area of aircraft performance, stability & control and aircraft handling characteristics to support the development and certification flight testing for both new and supplemental type certificates.
Plot time history data to investigate and resolve flight snags; analyze flight test data to develop/validate performance, stability and control law functionality and status test points based on test objective and certification pass/fail criteria.


Requirements
Knowledge/Skills/Abilities:



Knowledge of flight test operations and flight certification, including aerodynamic testing and/or design; flight testing of aircraft performance and handling characteristics, including experience with take-off; landing; climb and en-route performance; static-source error corrections and stall speed testing; longitudinal & lateral/directional stability and control; minimum control speeds; stall characteristics; high speed characteristics, crosswind takeoff/landing and flight into known icing.



Education:

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Computing skills (e.g. Excel VBA, Fortran, C, Visual Basic, Matlab, Simulink, CFD, Python)


Experience:

Aerospace engineering experience in Flight Sciences, including experience in aerodynamic testing and/or design; flight testing of aircraft performance and handling characteristics, including experience with take-off; landing; climb and en-route performance; static-source error corrections and stall speed testing; longitudinal & lateral/directional stability and control; minimum control speeds; stall characteristics; high speed characteristics, crosswind takeoff/landing and flight into known icing.
Must have a proficient working knowledge of 14 CFR Part 25 certification regulations pertaining to aircraft performance and stability & control, together with the associated means of compliance presented in AC 25-7C.
Operational experience should also include knowledge of test maneuver techniques and build-up methodologies specific to Flight Sciences testing.
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS PROJECT ENGINEERING MANAGER - MACHINE SYSTEM

Description:
JSG is hiring a Systems Project Engineering Manager for our client in Los Angeles, CA!

Responsibilities

Supervise the project managers, project engineers, and proposal manager in the Systems organization.
Work with his or her peer, the Systems Engineering Services Manager, to complete semi-custom and custom automated systems for welding, laser marking, laser processing, and precision laser cutting applications.
The Systems Project Engineering Department is responsible for successful project completion and will be provided support by the Engineers in the Systems Engineering Services Department Coordinate department’s activities with the Systems Engineering Services
Manager and Manufacturing Manager as well as coordinate activities with the Company support departments including Purchasing, Product Planning, Customer Service, Finance and Sustaining Engineering
Coach staff toward modern professional performance in the areas of:
Technically robust and advanced equipment
Creative and robust automation solutions
Engineering procedures and disciplines in a commercial environment
Presentation and communication with customers and other departments
Achieve project performance goals on equipment projects, setting and managing customer and Company expectations. Deliver quality products on time.
Manage development projects that provide new and innovative systems features and capabilities.
Oversee and support the quotation activities for systems.
Proposal writing and cost estimating.
Pre-sale activities include conceptual design, schedule, and cost estimation of semi-automated industrial laser processing workstations.

Conceptual design with assistance from others includes: cycle time estimate, mechanical layout of workstation, tooling concept, block diagram of electronic controls, and flowchart of overall man-machine interaction and machine functions.

Cost estimation includes estimation of NRE, RE, assembly, testing and materials.

Provide administrative management of systems project engineering department, including staffing, performance appraisals, career development, reporting, and participation in company-wide management and process improvement initiatives.

Partner with vendors and other third party concerns to augment systems and execution capacity to match our order demand and to provide added systems features and capabilities.

Requirements:
Eight years experience in a technical management capacity at an industrial firm.

BS degree in Mechanical or Electrical Engineering
Experience with motion control equipment, industrial machines and automation.

Excellent problem solving skills
Good verbal and written communication
Track record of project definition and project completion
Excellent time management skills and follow-though with ability to accomplish
day-to-day tasks while continuing to make progress, and bring to completion, longer term projects.
Good verbal and written communication.

US Citizen due to customer visit and specification requirements
Ability to occasionally travel domestically and internationally
 
Job Number: 367484
Job Location: LOS ANGELES, CA.
Per Diem: No
Overtime: Possible
Duration: DIRECT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Assembly Mechanic

Description:
Notes from Hiring Manager:

* Looking for someone that is skilled in engines, preferably in the Automotive, Aircraft or Military Industry; Mechanical assembly may be considered, but engine experience is ideal.
* Individual will be tearing down aircraft engines and preparing for rebuilds (strictly mechanical, not electrical).
* Must have familiarity with equipment (hand tools, pneumatic, drill presses, rivet guns, etc).
* MUST be computer literate; some data entry using Excel to document evaluation results

Summary

To perform moderately complex assembly of electronic and mechanical parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates moderately complex electronic and mechanical assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> May set up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years of related experience with a high school diploma, or equivalent education or experience to demonstrate the ability to successfully perform the job duties.
> Specialized and extensive experience in mechanical assembly techniques.
> Military and commercial quality specifications.
> Manufacturing policies and procedures.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to use measuring instruments, set-up/operate fabrication equipment in work area(s) & plan and organize work.
> Ability to concentrate while discriminating colors & small details, good hand/eye coordination & Finger/hand dexterity.
> Knowledge of shop math and ability to apply math skills.
> Electrostatic discharge procedures and methods.
> Ability to work well with others employing team principles.
> Must be able to work in small confined areas, be flexible in work hours and be able to lift up to 20 to 30 pounds
> All requirements are subject to possible modification to reasonably accommodate individuals with disabilities.
> Applicants selected will be subject to a government security investigation and must meet eligibility requirements, including US Citizenship, for access to classified information.
 
Job Number: 043_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 6 - 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Electronics Assemblers

Description:
~ Five (5) Openings: (4) Sr Electronics & (1) Electronics Assembler

Electronics Assembler (One Opening):

* This person will be running wires on the board to fabricate a harness and lacing. There will be very little actual assembly work.
* This is closer to an entry level roll, but we’d still like to see some electrical assembly experience (1 – 3+ years), but we are NOT looking for experience with PC Boards.

Senior Electronics Assemblers (Four Openings):

* Looking to hire four (4) Senior Electronics Assembler's that specifically have 4 – 5 years of Cable & Harness Experience
* They should be familiar with crimpers / military connectors, solder sleeves, and daisy chains
* RF Cable Experience and Commercial experience/HVAC/PC Boards/Etc. are not relevant

Summary:

Looking for a Senior Electronics Assemblers to perform complex assembly of harnesses, cables and electronic parts and assemblies in accordance with engineering drawings and specifications.

Responsibilities:

> Sets up and fabricates complex electronic assemblies utilizing various forms of written and oral instructions, automatic and semi-automatic machines and hand tools.
> Specific duties vary by workload and cover a range of assembly techniques including very complex harness and cable fabrication, electro-mechanical assembly.
> Performs administrative tasks associated with assembly operations which include Manufacturing Order documentation, production problem transmittal generation, and shelf life maintenance.
> Resolves complex manufacturing problems.
> Maintains good housekeeping, safety standards, and calibration requirements.
> Sets up production equipment.
> Practices Total Quality principles and concepts.

Qualifications:

> 5+ years extensive experience specialized in building harnesses, cables & electronic assembly techniques.
> Military and commercial quality specifications.
> Planning, leadership, and organization skills.
> Ability to read and interpret complex instructions, procedures, and engineering drawings/specifications.
> Ability to apply cost/quality control methods & set up/operate all fabrication equipment in area assigned.
> Ability to concentrate while discriminating colors & small details.
> Excellent math skills, hand / eye coordination and finger / hand dexterity.
> Electrostatic discharge procedures and methods.
> Ability to work independently, as well as working well with others.
> High School diploma, or equivalent education (GED) with the ability to successfully perform the job duties.
> MUST BE US CITIZEN
 
Job Number: 040_2018
Job Location: Cockeysville, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: 12 +/- Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Safety Engineer - Avionics - Contract - China - 2 years +

Description:
The Senior Systems Safety Engineer will be responsible for conducting the safety assessment of avionics systems for our Client. It is expected that the Senior Systems Safety Engineer will provide training to the Systems Engineers on safety design process and methods. In addition, the Senior Systems Safety Engineer will support the system architeture and design work of Avionics Systems for our Client.

This position serves as the systems safety domain expert for our Client, requires extensive experience and in-depth knowledge of safety activities starting at the avionics system level with experience at the aircraft level being desirable. This role must be capable of allocating safety requirements, conducting applicable analysis and assessments, and performing requirements validation and verification at the system and subsystem levels as it relates to safety function.

Essential Functions/Responsibilities
Responsibilities include:
·Conduct safety analysis and assessments at the system and subsystem levels.
·Generate safety requirements and allocate to the system and subsystem levels.
·Provide training to the systems engineers on safety design process and methods.
·Execute the design, analysis, or evaluation of assigned safety projects adhering to business standards, practices, procedures, and product/program requirements, manage corresponding project schedule and costs.
·Coordinate with suppliers to define their safety programs and oversee their efforts.
·Document safety related technical data of assigned projects, conforming engineering policies and procedures.
·Provide timely communications on significant safety issues or developments.
·Integrate processes across functional areas to improve coordination and maximize efficiency.

Qualifications/Requirements (must have to fill the job)
·Minimum Bachelor degree in Electrical Engineering, Systems Engineering, Computer Engineering/Sciences, Mathematics, or other related Engineering and Science fields from an accredited institution.
·At least 10 years of proven experience in safety design and analysis of complex electronic products and/or avionics systems.
·Established expertise in safety analysis and assessment, safety requirements development and resource allocation, proven hands-on experience in SSPP, FHA, PSSA, SSA, etc.
 
Rate: Negotiable
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III / no clearance / DO-178B ANSI C and Assembly, device drivers required CA

Description:
5962
Software Engineer
Irvine, CA
50-60/hr DOE
6 months +

Proficiency with RTCA/DO-178B development and verification; expert-level fluency in ANSI C and assembly, expertise with low-level software including device drivers, interrupt service routines, etc.

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to engineering requirements for complex or specialized projects or systems, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical; chemical, etc.)

· Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. · Ability to perform the essential functions of the job typically acquired through 4-6 years of related experience. · Has thorough knowledge of product area and domain and develops breadth of knowledge of industry practices, techniques, regulations, and policies. · Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages. · Ability to apply standard practices and techniques in specific situations, adjust and correlate data, recognize discrepancies in results, and follow operations through a series of related detailed steps or processes. · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment. · Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.
 
Job Number: JK-5962
Job Location: Irvine, CA
Rate: open
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr I & E Designer (OK)

Description:
Looking for one instrument/electrical designer (Project Designer or Senior Designer), please send resumes to me at this email.

This designer needs 15 plus years of experience.

Primary Functions/Responsibilities:

Safety
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, ethical, honest, accountable, and will deliver on all commitments.

Responsibility:
Provide design and drafting expertise to develop, instr/elect detail design packages for projects.

Provide quality design packages that satisfy the Refinery Standards and Guidelines.

Must be able to create a design schedule and complete projects in a timely manner.

Strong project and CAD experience.
(MicroStation experience a plus)

Strong Smart Plant Instrumentation
(SPI) would be a big plus (This is an instrument database that is widely used in the industry)

Must be a good communicator both verbally and written.
Must be able to gather field data and measurements.
Must be able to climb stairs and ladders.
Strong team player
Will be required to review and check vendor drawings.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-010619OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - but a PD Split is possible
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Software Engineer

Description:
• Participating in the full software lifecycle development (requirements analysis, design, implementation and unit testing, software integration and test, system level integration)
• Performing requirements analysis / definition to ensure system will meet all customer requirements.
• Integrating system parameters and software solutions into the real-time system and ensure the functionality of the requirement.
• Participating in code and other software artifacts reviews.
• Interacting with engineers from other disciplines, such as Systems and Electrical Engineering, to obtain pertinent information required to accomplish tasks.

Required Skills:
• Experience with C/C++ and Ada
• Experience using a Real-Time Operating Systems (RTOS), e.g., VxWorks, Linux, Green Hills (GH) Integrity or other.
• Familiarity with Agile lifecycle process including Scrum, Continuous Integration, and Test Driven Development Methodologies .
Minimum 4 years – Senior Software Engineer I Minimum 6 years - Senior Software Engineer II

Desired Skills
• Working knowledge of UNIX, Linux, Windows, VxWorks or other Real time operating systems
• Working with Open CL, Open GL, and CUDA on GPU platforms  
• Working experience with Power PC or similar processor, hardware interfaces, and space/airborne sensor systems. 
• Experience with design, code, integration, and test of large systems.
 
Job Number: 8023842
Job Location: McKinney, TX
Rate: 65.00
Duration: 8 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: John Ryan
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Engineer

Description:
Primary responsibility will be to support design completion, systematization (start-up), and operations at the chemical de-militarization facility.

-Performs electrical engineering activities for plant modifications, which include as a minimum the development/revision of basic discipline drawings, such as schematics, block diagrams, online diagrams, wiring diagrams, SETROUTE, BlockDraw, equipment/cable sizing, and specifications for equipment where deviations from standard documentations is required.
- Works under the direction of more senior engineers/designers and may have junior level engineers/drafters subordinates
- Responsible to produce the electrical portion of systematization turnover packages
- Conducts checking as required
- Properly interprets and applies codes & standards and customer design requirements, for the preparation of electrical design documents, specifications, and system description related to design tasks
 
Job Number: Bech2
Job Location: NEW CASTLE, NH
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Julianna Raffa
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Program Management Specialist

Description:
Location: Brookpark, OH
Rate: $60.00 - $70.00/HR
Duration: 1 year W2 contract
Shift: Regular 40 hour work week.
Overtime: Possible
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (U.S. Citizenship required)**

Duties:
95% - Support customer relationships by acting as the on-site liaison between Aerojet Rocketdyne and NASA Glenn in support of Company's (ARs) electric propulsion (EP) and power systems programs. Provide on-site support to local suppliers that support AR’s EP and power systems programs.
5% - Provides inputs as needed to the Director of Programs for development of the business growth strategies for the electric propulsion and power systems product area. Provide inputs to proposals, contract negotiations and statement of work (SOW) reviews.


Skills:
- Working knowledge of Electric Propulsion System thruster strings (Hall Current and Ion thruster systems).
- Working knowledge of the interfaces and interaction of EP systems with spacecraft.
- Experience with program planning, IMS development, risk and opportunity analysis, contract change management, control account management, work package development, earned value management (EVM) and program execution for cost reimbursable and fixed price programs for U.S. Government or commercial space missions.
- Demonstrated success in leadership and management of both development and production programs in a dynamic, matrixed environment.
- Proven ability to utilize excellent oral and written communication skills to build successful teams; presentation skills appropriate for executive-level briefings.


Education:
- Bachelor’s degree in electrical engineering, mechanical engineering or physics with 10 -15 years of experience working with NASA Glenn preferred.
- Should have a good understanding of Electric Propulsion.
- PMI PMP certification a preferred.
 
Job Number: 9648
Job Location: Brookpark, OH
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Specialist, Program Management OH

Description:
8272574
Job Title: Sr. Specialist, Program Management

Number of Positions: 1

Remaining Positions: 1

Duties:
95% - Support customer relationships by acting as the on-site liaison between Aerojet Rocketdyne and NASA Glenn in support of Aerojet Rocketdyne’s (ARs) electric propulsion (EP) and power systems programs. Provide on-site support to local suppliers that support AR’s EP and power systems programs.



5% - Provides inputs as needed to the Director of Programs for development of the business growth strategies for the electric propulsion and power systems product area. Provide inputs to proposals, contract negotiations and statement of work (SOW) reviews.

Skills:
Working knowledge of Electric Propulsion System thruster strings (Hall Current and Ion thruster systems). Working knowledge of the interfaces and interaction of EP systems with spacecraft.
Experience with program planning, IMS development, risk and opportunity analysis, contract change management, control account management, work package development, earned value management (EVM) and program execution for cost reimbursable and fixed price programs for U.S. Government or commercial space missions.
Demonstrated success in leadership and management of both development and production programs in a dynamic, matrixed environment.
Proven ability to utilize excellent oral and written communication skills to build successful teams; presentation skills appropriate for executive-level briefings.

Must also be able to satisfy federal government requirements for access to government information.

Education:
Preferred: Bachelor’s degree in electrical engineering, mechanical engineering or physics with 10 -15 years of experience working with NASA Glenn. Should have a good understanding of Electric Propulsion. PMI PMP certification a preferred.


Certifications & Licenses:
PMI PMP certification
PMP
PMP certification

Skills:
Required
ACCOUNT MANAGEMENTCHANGE MANAGEMENTEARNED VALUE MANAGEMENTEVMFEDERAL GOVERNMENT
Additional
IMSIONNASAPMIPMPPMP CERTIFICATIONPRESENTATION SKILLSPROGRAM MANAGEMENTSECURITYARCONTRACT NEGOTIATIONSELECTRICAL ENGINEERINGLIAISONMECHANICAL ENGINEERINGPMI/PMPPRICINGPROJECT MANAGEMENTPROPOSALSSOWSTATEMENT OF WORK

State/Province: Ohio
City/Town: Brookpark

Start Date: 07/16/2018 Hours Per Week: 40.00
Est. End Date: 07/16/2019 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-A8272574
Job Location: Brookpark, OH
Rate: open
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payolads Design Engineer IV - (Long Beach, CA)

Description:
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Assists with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Works under minimal direction. Need to have commercial airplane cargo systems experience. Must be familiar with cargo systems component types, their design, their function and how these components are integrated into the airframe. The cargo systems designer also has the responsibility as “Primary Reviewer” to review and approve Supplier cargo system component drawings submitted to Boeing via Supplier Data Transmittals. During these Supplier drawing reviews, it is the responsibility of the cargo systems designer to route the drawings as required to “Secondary Reviewer” support and interfacing groups for review and approval (i.e. Electrical, BMT, Flammability, Structures and Stress).

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: StructPayCA
Job Location: Long Beach, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Structures Design Engineer will serve in a design role and be responsible for conceptual design, developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs. Looking for candidates who want to be part of a core design team as opposed to someone who is only interested in pumping designs.

Successful candidates will have experience creating designs from conception through completion.

7 Engineers needed

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
• Familiarity with structural analysis methods, load paths, and material properties
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Working knowledge of composite aircraft construction including primary and secondary structure
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:
1. Minimum of 6 years to a maximum of 14 years aviation experience; 3+ years of experience working with integrated aircraft avionic/electrical systems in the areas of design engineering, system analysis, and system test.
2. Bachelors’ degree in Engineering from a four year college or university; preferably in Electrical/Electronic Engineering.
Knowledge, Skills and Abilities:
1. Familiarity of avionics/electrical design requirements of 14CFRPart 23.
2. Proficiency in writing technical documentation and reports involving test data and analysis.
3. Familiarity with avionics/electrical test laboratories and lab equipment.
4. Working knowledge of system qualification requirements including DO-160F/G for environmental, DO-178B for software, and DO-254 for complex electronic hardware.
5. Familiarity with SAE ARP 4754 and ARP4761 desirable.
6. Proficiency in Microsoft Office suite (Word, Excel, Project, PowerPoint is required.
7. Proficiency in requirements management tools such as DOORS, PLM tools such as TeamCenter and SAP is preferred.
8. Ability to manage and complete complex work assignments.
9. Ability to work independently and within a multi-functional team environment.
 
Job Number: 28-028
Job Location: Greensboro, NC
Rate: Up to $60
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures Engineer

Description:
Role Description


The Structures Engineer position is responsible for supporting the development, testing activities pertaining to structural and system configuration of the aircraft, here in Moses Lake, WA.


Support Flight Testing Activities, including but not limited to:

Discuss, review and participated in airplane structural and system modification plans and preparation activities.
Resolve technical issues relating to structural and system installation.
Support Maintenance Engineering teams during modification periods.
Attend Change Board (CCB) meetings for design changes.
Generate structural and system installation change modification drawings.
Ensure on-time Engineering deliverables to support flight test schedule.
Lead and oversee the technical and design aspects for structures/systems installation.



Disposition flight snags - Develop informed judgements regarding continued airworthiness and safety of flight.
Assess A/C configurations to determine airworthiness and safety of flight.
Review and disposition Notice of Escapes with respect to the impact to airworthiness and the aircraft testing schedule.
Disposition Non-Conformance’s, ranging from simple repairs to more complex flight critical repairs.
Document flight test design problems for long term fixes.
Create Test Definition sheets to facilitate Test Flights.
Conduct stress check.
Generate and review appropriate Limitations documentation - Compose restrictions to limit the operation of a flight test vehicle.

Review technical procedures for maintaining Flight Test vehicles, & acceptance/alleviation as required.
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Capable to resolve all technical issues relating to structural and system installation.
Select appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues associated with structural and system installation.
Exercises latitude in determining technical objectives of assignments and makes decisions/recommendations that are recognized as authoritative within the field.
Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative with limited supervision.
Knowledge of flight test operations including testing primary and secondary structure design, damage tolerance, durability, stability, and lofting.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Ability to successfully contribute to a positive and productive work environment.
Able to instil a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong skill set for:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal team:
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office, CATIA V5. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Five (5) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Structures, including experience in primary and secondary structure design, damage tolerance, durability, stability, and lofting.
Experience with CATIA is preferred.
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog sites.
5. QUALIFICATIONS THAT ARE DESIRABLE AT JOB ENTRY or NEEDED FOR BEGINNING EFFECTIVENESS IN THE JOB
• Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
• 4 years of progressive experience in the field of Engineering at MOOG is preferred. Equivalent years of experience outside of Moog will be considered.
• Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
• Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.
 
Job Number: 106
Job Location: East Aurora, NY
Rate: Open
Per Diem: No
Overtime: possible
Duration: 1yr+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TECHNICAL RESOURCES UNLIMITED INC
Attention: Barbara
Address: 210 BROADWAY STE 106
City, State: LYNNFIELD, MA 01940
Phone: 781/595-8200
800 Phone: 855/878-8200
Fax Phone: 781/598-2240
Website: www.truinc1.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split: NO

****MUST be a U.S. Citizen or Permanent Resident****
****MUTS have a Bachelor's Degree****

Job Description:
- Manages a team and provides direction for systems integration, technical design, model based design, systems analysis for supportability and effectiveness of technological systems, systems analysis for safety of system, systems research, systems verification or validation planning, architecture development, and requirements for commercial, industrial and governmental purposes.
- Integrates system activities to support the aforementioned tasks. Integration and analysis applies to the greater systems, interfaces between the systems and subsystems, and systems and components.

Additional Job Details:
Our client is one of the world's largest suppliers of technologically advanced aerospace and defense products. The ISR & Space Systems business unit provides products and services to global government and commercial markets that enable mission success in the harshest environments in space, in the air, at sea, and on the ground. We design and manufacture Environmental Control and Life Support Systems (ECLSS) and Active Thermal Control Systems (ATCS) on a number of space & sea platforms including the International Space Station, the U.S. space suit, and the next generation of space vehicles such as CST-100 and Orion, and the US Navy’s submarine fleet. We are looking for an enthusiastic and highly motivated individual to join us as a Systems Engineer to support the design, development, verification & validation, and operational support of ECLSS and ATCS hardware.

Responsibilities include:
- System development trade studies and optimization, development of concepts of operations, developing product requirements at the system/component level for mechanical / electrical / software, thermal/fluid/chemical system modeling, steady state & transient performance analyses, as well as component sizing.
- Skills in computational fluid dynamic (CFD) modeling and finite element heat transfer modeling are highly desirable.
- Skills in SINDA/Fluent, ANSYS ICEPAK/CFX/Workbench, StarCCM+, Matlab/Simulink/Simscape, Excel & VBA, MathCAD, DOORS & DXL, Model Based Systems Engineering (MBSE), SysML, MagicDraw & Cameo Modeler strongly desired.

Education / Certifications:
- Bachelors in Mechanical/Aerospace/Chemical/Systems Engineering with at least 5 years of experience

Experience / Qualifications:
- Experience on hardware development program: proposal / development / manufacture / verification / operational support
- Experience performing system development/integration/architecting
- Experience performing thermal/fluid/chemical analyses
- Relevant component hardware experience: heat exchangers, pumps / fans / separators / motors / motor controllers, chemical beds, sensors, valves, accumulators
- Relevant system experience: thermal control systems, air revitalization systems (CO2/H2O/trace contaminant removal), pressure control systems, oxygen generation systems, potable water systems, fuel cell systems, human waste management systems or other equivalent systems
- Ability to work well both independently and within an integrated product development (IPD) team environment
- Ability to lead a small team of technical associates
- Excellent attention to detail
- Excellent writing & math skills
- Must be a US Person
 
Job Number: 9391
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer IV - (OK)

Description:
Active Secret Clearance, required to start.

SEVERAL OPENINGS IN THE OKLAHOMA CITY, OK AREA.

Our Aerospace Client is seeking electrical engineers for the Communications/Navigation Systems, Mission Computing Hardware, Radar and IFF (Identification, Friend or Foe) Avionics Solutions, and Electronic Surveillance Measures (ESM) teams to support the Airborne Surveillance Command and Control (ASC2) programs for our Airborne Warning and Control Systems (AWACS) and Advanced Early Warning and Control (AEW&C) customers. The teams are looking for Senior Engineers to work with junior engineers designing, developing and integrating the communication, navigation, datalink, audio distribution systems for surveillance aircraft and ground systems, ESM processing and related passive tracking functions including technical subcontract management.Tasks may include but are not limited to the following:• Develop architectures to integrate the communication subsystems into various platforms, foreign and domestic.• Perform trade studies, modeling, simulation and other forms of analysis to predict interconnects and system performance and to optimize design around complex requirements.• Identify opportunities to improve the system performance and maintenance.• Develop new and improved modeling and simulation techniques.• Develop and document complex electronic and electrical system requirements. • Develop and execute critical tests to validate performance of designs to requirements.• Analyze and translate requirements into system, hardware / software designs and interface specifications. • Test to verify system designs to meet operational and functional requirements. • Monitor supplier performance to ensure system integration and compliance with requirements. Oversees subcontractor design, development, integration, testing and delivery of hardware, software and systems. • Review supplier detail design and partner performance to ensure compliance to requirements.• Provide support to products throughout their lifecycle by providing guidance and support to resolve issues.• Field and respond to customer hardware and software problems.
Strike, Surveillance and Mobility (SSM) is one of the world's largest providers of military airpower, serving the United States and allied nations, while continuing to expand globally with steady growth in international sales. SSM encompasses a portfolio of strike-fighter, surveillance and mobility platforms, including the AWACS, AEW&C, F/A-18E/F Super Hornet, EA-18G Growler, F-15 Eagle, P-8 and executive fleet aircraft. The SSM team is also responsible for the modernization and modification of several U.S. Department of Defense and international aircraft programs, including various surveillance and reconnaissance, head of state and bomber

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
 
Job Number: SystemsIVOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer NY

Description:
5542
Job title: Systems Engineer
Number of openings: 1
Job type: Engineering/IT/Professional
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 85
Start Date: 08/13/2018
Tentative End Date: 08/19/2019

Job Description
Function:

The System Design Engineer participates in defining the overall technical solution by interfacing directly with project management and design engineers with the goal of providing system level architectures and trade spaces necessary to support the end-users technical, financial and schedule needs. Primary activities include creation of system architecture, performance prediction, system sizing analysis, creating technical requirements baselines and Verification and Validation planning.


1 Create detailed product sizing and performance prediction analysis to support requirements generation for new products through the use of models, simulation and mathematical analysis.
2 Support the development of system level solution architecture with the assistance of senior level design and system engineers.
3 Contribute to product development by creating and executing detailed Verification and Validation plans and procedures for development and qualification testing of components and subsystems. This to include definition of required test equipment.
4 Lead the development of component level requirements that are fully traceable to system level requirements. Write specifications to capture these requirements.
5 Participate in the integration and test of components and subsystems.
6 Create concise reports and proposal write-ups that describe the design decisions and analysis results.

Business Development
1 Be a key contributor to the preparation of successful proposals. Contributions to include verification and validation approaches, component level design requirements, requirements compliance assessment, cost estimates and technical write-ups.

Project Management
1 Manage work packages within the established budget and schedule.
Engineering Leadership
1 Operate as a contributing member of in a team of creative, independent individuals.
2 Represent Moog in a manner consistent with its strong technical reputation.

SPECIAL CIRCUMSTANCES or UNUSUAL CHALLENGES

• Required to coordinate / gather / facilitate design requirements generated across other design functions such as Electrical Design, Mechanical Design, Software Design and Project / Product Engineering.
• Significant support of STE design engineer to ensure proper verification and validation approach is utilized.
• Some travel is required. This is estimated to be 8 trips per year to visit customers, vendors or other Moog sites.

• Masters of Science Degree in Electrical, Mechanical, Aerospace or Systems Engineering with 3 years of design / development experience is required An acceptable alternative is a Bachelor of Science Degree in Engineering plus 6 years of experience in a design / development engineering. A Bachelor of Science degree in Engineering Technology is not acceptable.
• 4 years of progressive experience in the field of Engineering at MOOG is preferred. Equivalent years of experience outside of Moog will be considered.
• Proven general capabilities/competencies in Initiating Action, Customer Focus, Building Strategic Working Relationships.
• Proven specific capabilities/competencies in Modeling and Simulation, Verification and Validation Methods, Control System Design, Integration and Test.


Request status: Open
 
Job Number: MB-5542
Job Location: East Aurora, NY
Rate: open
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Data Designer/Publications - Many Needed

Description:
Rotor craft Technical Data Designer - Aircraft structures, electrical, air frames maintenance experience desired. Technical publications authoring experience desired. Develops multiple publication elements for all levels of maintenance for a fielded equipment minor system or multiple sub systems. Collects, researches and analyzes source data and validates source data based on predefined and developed assumptions. Estimates the impact of the proposal or changes to the publication elements.
Email Resume: mmccarthy@pdstech.com
 
Job Number: BO-FL-Tech Data
Job Location: Ft. Walton Beach, FL
Rate: $39.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer

Description:
The Technical Designer does structural design engineering work for the interiors of business aircraft. Examples include custom cabinetry such as galleys, lavatories, closets and other storage compartments, interior peripheries, water/waste systems, entertainment equipment installations, avionics system support including retrofit and new installations, and seating (floorplan) reconfigurations. • Assist Lead and Primary engineers in accomplishing project tasks. • Research data, and assist in defining scope by proposal review, team meetings, coordination with Operations, data research and airplane survey. • Provide liaison to Operations personnel. • Determine to use existing data and/or new data needed to be created. • Coordinate with Product Support Electrical and Certification engineering. • Coordinate data delivery priorities and dates with Operations to meet needs. • Provide input to Work scope Change Requests. • Monitor and respond to Engineering Service Requests. Preferred candidates will possess the following characteristics: • Customer-service oriented to our internal customers - primarily Operations personnel. • Flexibility, adaptability and quick learning skills to meet our customers' needs. • Ability to perform and prioritize multiple assigned projects at the same time. • Knowledge and experience with AutoCAD, Catia v5 and SmarTeam.

Education and Experience Requirements:
Associates degree in drafting, design, engineering, manufacturing technology, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years related experience. Working knowledge of computer-aided design systems and personal computing systems. Working knowledge of engineering, engineering procedures and design drawing standards.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor/Writer - Level 3

Description:
Location: Grand Prairie, TX
Rate: $51.00/HR
Duration: 1 year contract
Shift: 1st Shift

****MUST be a U.S. Citizen****
****Candidates need experience working with MIL-STDs (especially MIL-STD 40051-1) ****
****Must have strong experience with XML. XLST and Arbortext needed****
****Experience with a Content Management System needed****
****MS Office required****
****2-3 years minimum recent experience required****

Job Description:
Technical Publications Writer that provides a wide array of technical documentation written to Military Specifications. Primary responsibilities include developing and validating Interactive Electronic Technical Manuals (IETMs), Depot Maintenance Work Requirements (DMWRs), Repair Parts and Special Tools Lists (RPSTLs), procedural art and illustrated graphics all developed to applicable Military Specifications. Candidate must possess excellent written and oral communication skills and be able to work well in a team environment. Must be flexible with outstanding work ethic and possess the ability to respond quickly to company and client needs. Must be able to interface with Subject Matter Experts (SMEs) to verify and understand technical concepts and develop courses of action to ensure project completion is on time and within budget. Candidate must be familiar with layout, design and structure of Organizational, Intermediate and Depot level Technical Manuals (TM’s)' including Operation and Maintenance, Theory of Operation, Fault Isolation Procedures, and Illustrated Parts Breakdowns (IPB’s). Must be able to read and interpret engineering drawings and software description documents. Candidate must be willing to work overtime as required. Some travel may be required.

Skill/Experience/Education
Mandatory: MUST BE SHOWN IN RESUME
****Candidates need experience working with MIL-STDs (especially MIL-STD 40051-1) ****
****Must have strong experience with XML. XLST and Arbortext needed****
****Experience with a Content Management System needed****
****MS Office required****
****2-3 years minimum recent experience required****
- Candidate must possess strong interpersonal skills
- Demonstrated written and oral communication skills
- Abilities to read and interpret Engineering drawings, schematics
- Strong teaming skills.
- Be flexible with an outstanding work ethic and possess the ability to respond quickly to internal and external customer requirements.
- Must have 2-3 years of professional experience

Must have experience/working knowledge of the following:
- EXtensible Markup Language (XML)
- Extensible Stylesheet Language Transformation (XSLT)
- MIL-STD-40051-1 and MIL-STD-40051-2 preferably Revision B
- MIL-STD-2361C or later release
- Arbortext Editor including Styler (5.4 or higher)
- UltraEdit or similar
- Adobe Acrobat Pro
- Content Management Systems such as WindChill
- Proficient with Microsoft office (Word, Excel, Project, PowerPoint)Must be familiar with layout, design and structure of Organizational, Intermediate and Depot level Technical Manuals (TM’s)' including Operation and Maintenance, Theory of Operation, Fault Isolation Procedures, and Illustrated Parts Breakdowns (IPB’s).
- Ability to produce illustrations using graphics tools such as ISOdraw, Autrotrol or similar graphics tools
- Ability to acquire and verify content and illustrations by coordinating across Engineering Disciplines, observing production methods, referring to engineering drawings, notes, manuals, and similar publications.
- Ability to write using clear and concise language that adheres to customer-established standards and conventions.
- Ability to write technical content for maintenance technical manuals including installation, test, repair, and troubleshooting procedures.

Desired:
- Experience with Electronics, Hydraulics and Mechanical Systems
- Experience with Multiple Launch Rocket System (MLRS)/ High Mobility Artillery Rocket System (HIMARS)
- Past experience working with US Army or other Military publications
- Interactive Authoring and Display System (IADS) 4.0 or later
- Electronic Maintenance System (EMS) Next Generation (NG)Bachelors or Master’s Degree in Information Technology, Electrical Engineering, Mechanical Engineering or Industrial Engineering
 
Job Number: 9550
Job Location: Grand Prairie, TX
Rate: $51.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Specialist

Description:
Technical Specialist is for Product Support Electrical/Avionics Engineering Group. This group performs customized electrical design engineering work for electrical, avionics, and entertainment systems on aircraft. Examples include: Flight Control Systems, Flight Management Systems, Com/Nav/Pulse, satellite and ground-based data communication systems, cabin data networks, cabin entertainment, Cabin Management Systems, etc. Comprehensive knowledge of aircraft systems and IT applications is desirable. • Create new and revised drawings and other forms of data. • Understand proposals, coordinate drawing needs with operations technicians, research existing data and survey airplane. • Coordinate with Product Support Structural and Certification engineering. • Coordinate data delivery priorities and dates with Operations to meet needs. • Provide input to Work scope Change Requests. Preferred candidates will possess the following characteristics: • Customer-service oriented to our internal customers - primarily Operations personnel. • Flexibility, adaptability and quick learning skills to meet our customers' needs. • Ability to perform and prioritize multiple assigned projects at the same time. • Knowledge and experience with AutoCAD and SmarTeam.

Technical Specialist contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


Education and Experience Requirements:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in specific technical discipline or 10 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job.
 
Job Location: Appleton, WI
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II

Description:
Roles and Responsibilities
Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc).

Qualifications and Education Requirements
1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline. 2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience. 3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies. 4. General knowledge of other related engineering and technical areas. 5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages. · Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment. · Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.

Preferred:
Report writing/reviewing good engineering judgement,

Someone with Hydraulic experience, technical writing and aerospace experience preferred.

Good verbal and written communication skills
 
Job Number: KM0023
Job Location: Irvine, CA
Rate: OPEN
Per Diem: No
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer II / hydraulic experience, technical writing, aerospace URGENT CA

Description:
162671 Engineer II (Test Engineer)

Work Site Address: Irvine, CA 92618
Job Number: 6251
Max Pay Rate: 55/hr
Start Date: ASAP
End Date: 6 months
Position Type: Contract

Manager is also asking for Catia & GD&T experience.

Researches, analyzes, designs, and tests component parts, processes, or systems to develop new and/or improve core products. Develops and recommends solutions to well-defined engineering requirements, or for components or segments of a complex product or system, to ensure that design objectives are met. Applies engineering principles based on assigned engineering domain (e.g. mechanical; electrical, chemical, etc).

Qualifications and Education Requirements
1. Bachelor degree (BS) (or Professional Engineer (PE) certificate) in an engineering or science technical discipline.
2. Ability to perform the essential functions of the job typically acquired through 2-3 years of related experience.
3. Has working knowledge of engineering domain principles and techniques, product functionality, industry practices, regulations, and policies.
4. General knowledge of other related engineering and technical areas.
5. Proficient with engineering design and analysis tools (e.g. computer-aided design or modeling systems); ability to use standard software packages. May require capability using specialized software applications or languages.

· Ability to work with general objectives regarding projects and team goals; applies judgment in selecting procedures and techniques that should be applied. Works collaboratively in a team environment.
· Ability to effectively communicate status, actions, recommendations, and other technical information with clarity and precision. Responsive to inquiries from other engineering and business teams.


Need Test Engineer with:
Report writing/reviewing
Good engineering judgement
Hydraulic experience
Technical writing and aerospace experience preferred
Good verbal and written communication skills
Catia & GD&T

Engineering degree.
 
Job Number: JK-6251
Job Location: Irvine, CA
Rate: 55/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wind Project Engineer

Description:
Wind Project Engineer

Location: Jackson, MI
Duration: 1 year

Duties:
The primary role will be to support the development and execution of a new large-scale wind powered electric generating facility located in Michigan. The Wind Project Engineer is responsible for engineering, design, and delivery of grid connected wind generation systems on time and on budget.

Key Responsibilities include:
- Development, administration, and oversight of a wind farm EPC contract.
- Development, administration, and oversight of a major wind turbine generator purchase agreement contract.
- Review and approve submittals.
- Coordinate the response to requests for information (RFI)
- Support all site permitting and site logistics and planning
- Consults with the project construction organization concerning design constructability as related to field conditions, sequencing and scheduling of construction activities.
- Consults with project management concerning schedule, budget, and contractual terms as related to engineering deliverables.
- Support the development of technical specifications and bid documents for engineered equipment, materials engineering, and construction contracts
- Support the project in the evaluation engineering, vendor and contractor capabilities
- Responsible for the oversight of detailed design documents by the Engineer of Record, either by internal project engineering staff or by contracted services.
- Identify, analyze and recommend corrective actions to technical issues identified in the field during project execution or initial operation.
- Develop and/or review engineering drawings and calculations that detail plans and specifications for wind construction projects.
- Support testing and commissioning of new wind generation facilities.
- Communicate effectively with a vast group of stakeholders to ensure all technical aspects of the projects are completed per the safety, scope, schedule, and budgetary objectives.
- Attend and/or lead project coordination meetings.
- Participate in the closeout of projects including turnover of project files and record documents at project closure; captures lessons learned.
- Wind project development support including site feasibility studies, conceptual engineering design, and cost estimating support.

Skills:
The following skills and experience may set candidate apart from others:
- Experience in Wind Generation system design, permitting, construction, commissioning, operation, or maintenance.
- Experience with EPC contracts
- Experience with interconnecting wind generation to the electric transmission system.
- Experience in project management including the oversight of scope, schedule, and budget.
- Experience in procurement of engineered material, equipment and professional services.
- Experience coordinating and developing contract documents, specifically engineering drawings and technical specifications for both consulting and construction services.
- Advanced Electrical Engineering degree from an ABET accredited university.
- Professional Engineer (PE) License.

Education:
Bachelor of Engineering degree from an ABET accredited university.

Required Skills:
- Engineering Design
- EPC
- Project Engineer
- Wind Farm
- Permitting

Additional Skills:
- Engineer
- Estimating
- Feasibility
- Procurement
- Project Development
- Technical Specifications
- Body Engineering
- Construction Contracts
- Contracts
- Electrical Engineering
- Logistics
- Maintenance
- Materials Engineering
- Pre-Construction
- Project Management
- RFI
- Scheduling
- Sequencing
- Turbine
- Turbine Generator

Languages: English (Speak, Read, Write)

Minimum Degree Required: Bachelor's Degree

Call Notes:
- Someone that will help support remaining development activities for new wind assets
- Engineer responsible for developing and administrating the EPC contract
- Knowledge of EPC and how it’s handled
- Technical resource to getting major contract in place
- Procurement of wind turbine generating equipment
- Provide support to acquire wind resources and additional resources to design and construct
- Open for Civil Engineers / Mechanical Engineers if they have the right skill set
 
Job Number: 18-12254
Job Location: Jackson, MI
Per Diem: Yes
Overtime: Yes
Duration: 1 Year
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Robin
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Installation Engineer III - (Oklahoma City, OK)

Description:
SEVERAL OPENINGS IN THE OKLAHOMA CITY, OK AREA.

Active Secret Clearance, not required to start.

Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Develops and maintains electrical product detail, assembly and installation designs (e.g., equipment racks, power panels, cable routing and geometry, antennas).Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops basic statements of work. Participates in technical review of supplier capabilities to facilitate source selection. Analyzes functional and physical input to assure development of complete integrated design.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Mentor Graphics experience desired.

CATIA V5, Enovia.
 
Job Number: EEOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

Back to Advanced Job Search