Job Search Results

215 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/07/21 Saturday 04:17PM Pacific Time by ContractJobHunter. )

Listings 1 - 215

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Mechanical Engineers - Orlando, FL

Description:
Now Hiring Aerospace Mechanical Engineers!

Overview:

STS AeroStaff Services is now offering Aerospace Mechanical Engineer jobs in Orlando, Florida. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best engineering jobs in Orlando, Florida; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as an Aerospace Mechanical Engineer, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• The candidate will be responsible for the thermal design, analysis, and testing of assembly systems, subsystems, and components
• Tasks include performing preliminary and detailed thermal analysis on assembly systems and subsystems as well as performing comprehensive modeling of the entire thermal system using standardized processes and tools
• Tasks may also include providing support for thermal testing of systems, subsystems, and components
• In addition, the candidate will provide technical documentation and input to data packages to support peer and customer reviews, present analysis data to program and customer personnel at technical interchange meetings and design reviews
• Candidate will perform heat transfer using standardized thermal software tools, analyze thermal management systems, and coordinate requirements and design solutions with program personnel
• Responsible for research and development of viable thermal solutions for systems and components
• Experienced with relevant analytic tools for thermal analysis

Required:

• MS degree from an accredited college in Mechanical Engineering or Aerospace Engineering, or related field or a BS with at least 2 years’ Thermal Analysis experience in the aerospace industry
• Experience with thermal design of assembly systems, subsystems, and components
• Demonstrated strength in thermal analysis with a desire to learn more and demonstrated strong problem solving and analytical skills
• Experience performing heat transfer analysis
• Excellent writing and verbal communication skills for generating thermal plans, thermal analysis reports, documentation, and potentially proposals are necessary
• Candidate must be able to obtain a security clearance

Preferred:

• Experience with CAD modeling using PTC CREO, FORTRAN programming, CFD software (Star CCM+, FlowEFD), and Siemens NX CAD and Thermal/Flow software suite
• Experience with MATLAB and Mathcad
• Creativity/innovation to solve issues related to thermal design performance of any aspect of thermal systems
• Experience developing and analyzing in thermal design of thermal management systems
• Experience calculating internal and external convection coefficients of simple and complex geometries and being able to research literature when necessary
• Experience writing environmental and component specifications, and system/subsystem/component test plans
• Considered an emerging authority

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40586
Job Location: Orlando, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
Job ID# 14657

Title Airframe Design Engineer
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 01/10/2018
Last Updated: 01/10/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX and FiberSIM CA

Description:
160536/14657
Title Airframe Design Engineer
55/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:
•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Must have a thorough understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to develop and communicate new concepts; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have strong communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one or more engineering areas; capable of representing the organization as a prime technical contact and, lead a team of moderately experienced professional employees on single component projects. Able to work extended hours as required. A Professional Engineering License and original work published in professional engineering journals are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; six or more years of experience with a bachelors degree, four or more years of experience with a masters degree, or two or more years with a PhD. May substitute equivalent engineering experience in lieu of education. BS in Mechanical Engineering, Aerospace Engineering or similar are desired. Advanced degrees highly desirable.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.

- Experience with NX and FiberSIM highly desired

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14657
Job Location: San Diego, CA
Rate: 55/hr max
Duration: 6 month contract
Input Date: 11/13/2017
Last Updated: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CAD Nesting Operators - Pinellas Park, FL

Description:
Now Hiring CAD Nesting Operators!

Overview:

STS AeroStaff Services is now offering CAD Nesting Operator jobs in Pinellas Park, Florida. To learn more, check out the following information.

Are you tired of working the same dead-end contract positions? If so, STS AeroStaff Services offers the best machine operator jobs in Pinellas Park, Florida; positions that will reward your skills with competitive compensation and benefits. When it comes to your career as a CAD Nesting Operator, don’t just wing it. Let STS AeroStaff Services help you fly your career forward!

At this point in the post, you can read on, apply online or contact an STS Recruiter at 1-877-707-5767.

Essential Duties & Responsibilities:

• Uses standard CAD (Computer Aided Design) digitizing techniques and skills
• Utilizes AutoCAD 2D in conjunction with TruNest nesting software to generate sheet metal flat pattern arrays
• Make basic computations in coordination with specifications
• Executes simple mathematical calculations
• Leverages off existing rules and best practices to ensure developed sheet metal nests meet efficiency and effectiveness requirements

Company Overview & Benefits:

STS AeroStaff Services works with the largest names in the aviation industry. We offer hundreds of career opportunities throughout the United States, and with more than two decades of experience, our aviation Recruiters soar in their commitment to excellence and professionalism.

We proudly offer all qualifying candidates competitive rates, direct deposits, medical insurance, cash advances and referral bonuses. Have questions? Contact us today at 1-877-707-5767.
 
Job Number: 40457
Job Location: Pinellas Park, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CATIA V5 Designer III - MO (Catia V5)

Description:
US CITIZENSHIP REQUIRED. Active Secret Clearance, NOT REQUIRED to start.

Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel. Works under general direction.

Experience in CATIA and ENOVIA desired.

AA Degree
 
Job Number: TechDesMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2017
Last Updated: 11/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
** 10 years as a drawing and model checker for Aerospace mechanical hardware**
-5-10 years of experience with Creo along with experience using CAD database management and PLM tools - Windchill required.
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless are required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 03/21/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Completions Designer I

Description:
Completions Designer I

Location: Savannah, GA
Pay Rate: ($27/hr - $35/hr)
Duration: Long Term Contract
Shift: 4x10

Unique Skills:
High proficiency in AutoCAD required. High level of customer communication skills required. SharePoint proficiency strongly desired.

Education and Experience Requirements:
Bachelor's Degree Drafting, Design Engineering or related curriculum or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Proficient in operating CAD equipment.

Position Purpose:
Create design drawings for manufacturing of aircraft parts, assemblies, and installations working from customer specifications and instructions. Ensure that activities are in line with internal/external customers, FAA requirements, and Company processes to achieve department objectives.

Principle Duties and Responsibilities/Essential Functions:
1. Conduct research for information on existing drawings, hardware, vendor parts, etc. relating to job task.
2. Evaluate customer requirements and provides recommendations related to the design.
3. Identify problems and provides solutions to designs.
4. Coordinate design work with other departments, engineers, and designers as required in order to complete in a timely manner.

Additional Functions:
1. Enforce safety rules and procedures.
2. Ensure application of all Company regulations and policies. Perform other duties as assigned.
 
Job Number: 8000
Job Location: Savannah, GA
Rate: 27-35
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/02/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composites Tooling Engineer / CAD Creo or Solidworks CA

Description:
14307

Title Composites Tooling Engineer
45/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We currently have an exciting opportunity for a Composite Tooling Engineer in our Airframe and Composite Design group in San Diego, CA.

DUTIES AND RESPONSIBILITIES:
•Provides expertise in tooling design for both large and small composite laminates including primary structure and control surfaces.
•Understands composite tooling theory and the selection of appropriate tooling material for the application and/or production volume required.
•Applies technical knowledge to analyze, investigate and resolve assigned engineering problems encountered on the production floor with regard to damaged tooling.
•Applies engineering principles effectively for design, development and sustaining engineering activities related to aircraft systems integration and installation.
•Documents findings, communicates results to engineering staff, makes technical presentations and may represent the organization as the prime technical contact on small identifiable projects.
•Advises management of work in progress, material availability and potential problems to ensure that personnel, equipment, materials and/or services are provided as needed.
•Person will be responsible for working with personnel throughout the company to help resolve any engineering related tooling issue that may impact the manufacturing delivery schedule.
•Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.
•Other duties as assigned.
•Exposure to various composite manufacturing processes and tooling concepts.
•Experience with Pro-E Cad software.
•Responsible for observing all laws, regulations, and other applicable obligations wherever and whenever business is conducted on behalf of the Company.
•Expected to work in a safe manner in accordance with established operating procedures and practices.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; two or more years of experience with a bachelors degree. May substitute equivalent engineering experience in lieu of education.
•Must have an understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties.
•Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems.
•Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area.
•Background with various composite tooling design is preferred.
•Experienced with a CAD program; Creo, Solidworks, etc.
•Ability to present information to internal and external customers.
•Able to work extended hours as required.
•A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14307
Job Location: San Diego, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 01/30/2018
Last Updated: 02/22/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contingent - CAD Specialist

Description:
AS Degree/Certification in Design or Engineering Technology or related field. CATIA V5 (8+ years experience or 16,000 hours of CATIA). Workbenches: GSD, FTA, part pesign. Drafting exposure to various technologies as required by the dept. speciality area (stamping, injection molding, forging, casting, etc.) which shall include: Forming requirements, tooling requirements, cost drivers. Ability quickly to adapt to new tools and processes so as to enable efficient vehicle development. Assist design engineer(s) by making recommendations with consideration towards manufacturing feasibility by considering formability. Create layouts and part geometry based upon requests, requirements or the direction of the design engineer PIC for the part.

1) CatiaV5 - VPM Navi - Catia Expert in: Advanced Solid & Surfacing, Meshing, Sheet Metal, Draft Analysis, Digital Mockup (SPA)
2) Manufacturing Knowledge - Sheet Metal (forming, stamping, welding), Injection Mold, Blow Mold, Pipe Forming, Process Control
3) Engineering Capability - Tolerance Stack-up, Part Design (function, cost, weight), Materials.
 
Job Number: NSR3003CAD
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/15/2017
Firm Name: NSR GROUP
Attention: Kikuko Ono
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contingent - Design Engineer

Description:
CAD Designer
- Develops CATIA 3D layouts and 2D drawings in support of Controls and Exhaust Design Engineering staff
- Can work with CATIA kinematics models
- Responsible for model management within Enovia DPM environment
- Performs other support tasks, such as cost calculation and document making
- Daily interaction with Design Engineers

Qualifications
- Associates Degree in Design or Drafting
- 6000hrs MIN CATIA V5 experience
- CATIA CAE capability preferred
- Chassis component modeling experience – Pedal, Shifter, Exhaust components and A-class surface data experience preferred
- Strong communication skills
- Strong initiative, proactive viewpoint
 
Job Number: NSR3001DE
Job Location: Columbus Area, OH
Rate: Open
Per Diem: No
Overtime: Straight
Duration: LT
Start Date: ASAP
Input Date: 11/15/2017
Firm Name: NSR GROUP
Attention: Kikuko Ono
Address: 655 METRO PL S STE 600-044
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Manufacturing Eng II

Description:
Unique Skills:

Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 118508
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV CA

Description:
160469/7457002

Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
Canoga Park, CA
60/hr max

Duties:

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE
Additional Skills:
PACKAGING ENGINEERING
HARNESS CABLING

# of Positions: 5

Location:
Canoga Park, CA


Schedule:
Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457002
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/09/2017
Last Updated: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3

Description:
Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Duration: 6 month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **

** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

•Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
•Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
•Applies theories of heat and energy transfer to create practical solutions to technical problems
•Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
•Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent. MS degree is desired.
 
Job Number: 8029
Job Location: Canoga Park, CA
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/04/2017
Last Updated: 01/16/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 3 CREO CA

Description:
Job Title: Design Engineer - Level 3

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerancing). Windchill experience strongly preferred **



** 6 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 6 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **





Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.



Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.

Winchill experience strongly preferred.

Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.

Engineers are also required to analyze and verify product design and performance for adequacy and reliability.

Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.

Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.

Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.

Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 06/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455592
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 7 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
**Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred**

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.

Skills:
- Candidates must have significant experience with Creo & GD&T.
- Higher level certifications are preferred.
- Windchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
- BS degree in an Engineering field or equivalent.
- MS degree is desired.
 
Job Number: 8028
Job Location: Canoga Park, CA
Rate: $55.00 - $65.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 10/09/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4 CREO / BS required URGENT CA

Description:
7455575
Job Title: Design Engineer - Level 4
60-65/hr max

Number of Positions: 15

Remaining Positions: 5

Please note that a BS degree is required.

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.



** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **



** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **


Creo
GD&T
5+ years “Design” experience, however drafting skills a plus
BS in Engineering or related field
Prefer: Windchill, and Rocket Design experience.



Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
Applies theories of heat and energy transfer to create practical solutions to technical problems
Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.
Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.



Skills:
Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
Winchill experience strongly preferred.
Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
Must be able to prepare and make presentations at both internal and customer design reviews.

Education:
BS degree in an Engineering field or equivalent. MS degree is desired.


Skills:
Required

AEROSPACE DESIGN CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL


State/Province: California
City/Town: Canoga Park


Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 09/30/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7455575
Job Location: Canoga Park, CA
Rate: 60-65/hr max
Duration: 10 month contract
Input Date: 01/17/2018
Last Updated: 01/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
Sr. Designer to support program initiatives. Creates innovative and practical mechanical and electro-mechanical concepts and designs for components, assemblies, tools, and products of varying complexity. Works closely with engineering, vendors, manufacturing, quality, and customers on design specifications. Ensures designs are free of layout process defects. May assist engineers with defining design standards and configurations. Applies Computer Aided Design (CAD) methodologies, theories, and techniques. Reviews various completed engineering documents to ensure compliance with engineering and military standards, procedures, specifications, and accuracy of calculations and dimensions. Provides expert technical consultation to the division and customer community relative to comprehensive and in-depth knowledge of design.

Develops highly innovative concepts that satisfy functional and operational requirements for existing product lines and new product development programs. Ensures that CAD models can easily transition to modeling and simulation software. Prepares the most complex design layouts, schematics or sketches (including test plans, procedures, or specifications) of functional systems to satisfy system and integration requirements within cost and producibility constraints. Prepares drawing packages to military or equivalent ASME standards. Checks completed layouts, drawings, test plans, test reports, procedures, and change history documentation (e.g., engineering change notices) for clarity, completeness, conformance to engineering, military, and industrial standards, procedures, specifications, and codes, and ensures accuracy of calculations and dimensions. Coordinates closely with systems engineers to ensure designs satisfy contractual requirements. Evaluates completed drawings, specifications, and procedures for producibility and viability of design, appropriateness of tolerances, fits, finishes, materials, and validates integration of equipment. Proficient in tolerance analysis and Geometric Dimensioning and Tolerancing (GD&T). Proficient in use of applicable CAD equipment and drafting techniques including 3D modeling and manipulation of files. Comprehensive knowledge of military drawings and specifications, and applicable MILSPEC/STD's. Comprehensive product line knowledge at the component, subsystem, and system levels. Comprehensive knowledge of production methods and understanding of human factors. Ability to provide direction to a design team.
 
Job Number: 41026
Job Location: AZ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 3 mos +
Start Date: ASAP
Input Date: 11/02/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
No Clearance Needed

- Experience working with electrical/electronic systems of military ground vehicles - Completes designs from beginning to end: including concept development, review, detailed design, documentation, verification and validation of simple sub-systems.
- Utilizes advanced modeling and analysis tools to develop product specifications, models, simulations, technical data packages and integration/verification procedures.
- Expert knowledge of CAD drafting/modeling and design techniques.
- Experience designing wiring harnesses/cable assemblies, routing of wiring harnesses/cable assemblies and developing wiring harness/cable assembly drawings
- Understanding of drawing generation utilizing Pro-E and Pro-Cable (minimum 2-3 years’ experience) - Understanding of MIL-STD-100, ANSI Y14.5/14.41, and Geometric Dimensioning and Tolerancing (GD and T).
- Understanding of wire routing utilizing Routed Systems (minimum 2-3 years’ experience)
- Working knowledge of military electrical connector and electrical cabling specifications. Capable of creating wiring harness schematics with Visio Technical
- The Integrated Product Team (IPT) environment for this position requires highly cooperative team working skills, as well as very good oral and written communication skills.
 
Job Number: 41014
Job Location: MI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/01/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer - AutoCAD Operator - Active Secret Clearance Required

Description:
Designer - AutoCAD Operator - Active Secret Clearance Required
Location: Pagosa Springs, Colorado
Terms: Long Term Contract Employment

Active Secret clearance required prior to start with the ability to obtain a Top Secret/SSBI Clearance, clearable to TS/SCI.

Description:
• Designer - CAD Operator to join our team.
• Provide accurate, timely, and unambiguous warning and attack assessment of Air, Missile, and Space threats with daily visibility of the leaders including the President of the United States.
• As the Designer - CAD Operator your duties include, but not limited to: Designing perform required drawing updates from various installs/de-installs within the sites including updates to mission systems.
• Certification and Accreditation (C&A) packages within 30 calendar days, updates to Communications-Computer Systems Installation Record (CSIR) drawings for outside plant, inside plant and all infrastructure, equipment, and systems of Organization.

Required Skills:
• Ability to plan, lay out, draw and revises part assembly and installation engineering drawings from basic layouts, established references, notes and discussions with engineers and standard data.
• Ability to utilize computer aided design equipment and/or manual tools.
• Ability to complete layout drawings prepared by others in accordance with standard engineering drafting practices or may develop complete major layouts of engineering drawings.
• Ability within parameters to determine scaling required inserts necessary reference planes, centering and dimension lines, hidden line interpolations and sectioning; prepares specifications for parts, assemblies and installations; prepares complete production detail drawings; contributes design modifications to improve quality of product or facilitate manufacturing operations.
• Familiarity with CAD software packages required.
• Willing to work shifts in support of 24x7 operations.

Desired Skills:
• Drafting applications, digital imaging techniques, use of AutoCad, planning and preparing graphic presentations of complex items.
• Experience with DoD processes and procedures.
• Understanding OPSEC requirements for the USAF. *Proficient AutoCAD and Microsoft software and basic functions of CorelDraw, Adobe Creative Suites
• Construction and/or manufacturing background helpful but not required Ability to have a number of jobs 'open' at any given time.
• Have demonstrated experience and capability with interfacing with the Customer at very high levels as well as interface with multiple DoD Agencies.
• Active Top Secret/SSBI Clearance, clearable to TS/SCI.
 
Job Number: 379025
Job Location: Pagosa Springs, CO
Rate: 31.96
Per Diem: No
Overtime: Possible
Duration: 12 Months
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: CDI CORPORATION
Attention: Kris Douglas
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Director of Engineering

Description:
Director of Engineering

Job Summary

Responsible to lead the Engineering team in the research, development, design, and certification of aircraft components. Plan and direct all aspects of engineering including mechanical, structural, and avionics design, stress analysis, testing, and document control. Oversee the financial budget and manage the organization’s manpower planning. Responsible for maintaining project budgets and schedules.

Supervisory Responsibilities
•Directly supervises employees in the Engineering department.
•Carries out Supervisory responsibilities in accordance with the organization’s policies and applicable laws.
•Responsibilities include interviewing, selecting, hiring, and training employees, planning, assigning and directing work; appraising performance, rewarding and disciplining employees, addressing complaints and resolving problems.
•For Exempt Managers: Managers that carry out these responsibilities for two or more employees will have significant input in hiring and termination decisions.

Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, company will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.


Education & Experience
•Bachelor’s degree in Mechanical, Electrical, or Structural Engineering from four-year college or university; and eight to ten years related experience and/or training; or equivalent combination of education and experience.
•Master’s degree in Engineering or other relevant discipline preferred.
•10 years’ experience in engineering management in a substantive airframe or Medevac/Aeromedical Evacuation related organization

•5 years’ experience managing a wide range of projects from small to large

•1-2 years’ experience in aircraft delivery operations
•Expertise in developing and executing operating budgets
•Experience with quality management systems and/or regulatory compliance desired
•Experience in project/program management preferred

Skills
•Strong interpersonal skills and a high degree of collaboration at all levels.
•Demonstrated ability in process improvement
•Ability to manage people in different project teams and functional roles.
•Excellent communication and presentation skills, both written and verbal.

Computer Skills
•Proficient with Microsoft Office Suite, including Word, Excel, PowerPoint and Outlook.
•CAD/CAM/CAE/EPDM
•Inventor
•SolidWorks
 
Job Number: 52701
Job Location: Englewood, CO
Duration: Direct Hire
Start Date: ASAP
Input Date: 11/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Phoenix area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065209
Job Location: Phoenix, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJmAAM&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Diego area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065205
Job Location: San Diego, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJIAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the San Jose area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065206
Job Location: San Jose, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJXAA2&URLSource=cjhunter

Electro-Mechanical Design Engineer

Description:
Electro-Mechanical Design Engineer
PDS is looking for experienced Electro-Mechanical Engineers in the Los Angeles area
Duties
Electro-Mechanical Design Engineer  Individual will be responsible for the hardware development for missile, satellite  and / or fire control electronics and general packaging support. Activity will require: 

Cross functional coordination to complete hardware design effort to support hardware integration for the designed weapon system. 

Research, development and design of components, equipment and networks for military applications.

Basic Qualifications

- Must be able to obtain a security clearance 
- Candidate must have a Bachelor’s degree from an accredited college in a related discipline with a minimum 3.0 GPA
- 3D modeling tools (example would be Pro-E/CREO, Catia, Solidworks or similar)

Desired skills

- Working knowledge of harness design and development.
- Working knowledge of printed wiring board and surface mount technologies is desired.
- Exposure to, or experience with, Pro/Cable for harness development and Cadence for PWB design is a plus.
- Working knowledge of military hardware specifications is desired.
- Desired design experience includes chassis, electro-mechanical assembly, electrical cable and/or network design. Able to interpret electrical schematics for harness development a plus.

 

 



 
Job Number: 1710065207
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 07/20/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000021WJcAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Support Equipment Design Engineer IV

Description:
Support Equipment Design Engineer IV

Location: Canoga Park, CA
Pay Rate: DOE ($50/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, OT possible
**MUST be a U.S. CITIZEN**
** Dual citizens and Permanent Residents are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
** Ground Support Equipment (GSE) experience is required.
** Creo experience is required **
** 10+ years experience and a Bachelors Degree or equivalent are required **
**(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **

-Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
-Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
-Leads preliminary and critical design review preparations.
-Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
-Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
-Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.

Skills:
-Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
-Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
-In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
-Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
-Must be an experienced engineer with knowledge of CAD using PTC Creo2.
-Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
-Pre-verification of CAD models and drawings in the PLM system is also required.
-Effective interpersonal and communication skills and must be able to operate effectively in a team.
-Expert knowledge of reading and interpreting drawings and related specifications is also required.
-Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS PowerPoint, MS Excel) to track assignments of Product teams.

Education:
-Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
-Experience in Design and Manufacturing is a must.

Skills Required:
GROUND SUPPORT EQUIPMENT CREO AEROSPACE
 
Job Number: 8235
Job Location: Canoga Park, CA
Rate: 50-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 05/23/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (15 plus needed)

Description:
Unique Skills:
• Catia V5, SAP and Solumina experience.

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelors degree in Mechanical, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Three (3) years Manufacturing Engineering, planning, or related technical experience.
 
Job Number: 24-206
Job Location: Savannah, GA
Rate: $50 - $55
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 02/22/2018
Last Updated: 03/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I

Location: Savannah, GA
Rate: $35-40/HR
Duration: Long Term Contract



Unique Skills:
Experience in SAP/Solumina preferred

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.


Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
Languages Required (in addition to English): None
 
Job Number: 8040
Job Location: Savannah, GA
Rate: $35-40/HR
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I
Savannah, GA
Rate: $30-$35

Unique Skills:

Must be a U.S. Citizen


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 8166
Job Location: Savannah, GA
Rate: $30-$35
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/01/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Savannah, GA
Rate: $50-$55
Long Term contract
1st Shift



Unique Skills:
Knowledgeable with CATIA, SAP, Solumina software programs. Aircraft experience with aircraft shop support and creating work instructions.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8217
Job Location: Savannah, GA
Rate: $50.00 -$55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Input Date: 03/21/2018
Last Updated: 04/24/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Catia / SAP / SOLUMINA / SmarTeam

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months (18) Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). 2. Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 3. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 4. Author DRDI/DMT rework instructions to support effective corrective actions. 5. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 6. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 7. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 8. Investigate and assist in preparing justification for equipment and facility requests. 9. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. 10. Participate in Design for Manufacturing assessments with Engineering. 11. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 12. Perform audit of co-workers output based on defined requirements and procedures. 13. Must demonstrate knowledge of ME policies and procedures. 14. Incorporate Lean Manufacturing Methodology into existing and future processes. 15. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives. 18. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7886
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
SAP - SOLUMINA - CATIA REQUIRED


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7774
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 10/26/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Requires experience in aviation manufacturing. Requires experience in Solumina, Catia, Microsoft Office, and ERP software.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 8135
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 12/05/2017
Last Updated: 01/12/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
Experience writing manufacturing work instructions and creating bill of materials for aircraft manufacturing.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7979
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 05/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
- Solumina, CATIA and SAP preferred. Prefer prior experience on live aircraft and/or in environment of aircraft reconfiguration.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7511
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 06/08/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term contract
Shift: 4x10


Unique Skills:
Required: SAP - Catia - Solumina

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7515
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 03/07/2018
Last Updated: 03/07/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR (DOE)
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: $30.00 - $48.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/12/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 07/18/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Denver/Centennial, CO
Pay Rate: DOE, exempt OT
Duration: 1 year W2 contract
**MUST be a U.S. CITIZEN**

Description:
• Bachelor's degree or higher
• Mechanical Design Engineer to support production tooling design
• 10+ years experience
• Proficient in CAD modeling and drawing creation – NX version 10
• Develops system, mechanism and component model designs and drawings
• Proficient with structural designs and mechanisms
• Capability to perform system integration and system level trade studies to optimize designs for manufacturing, production and performance
• Knowledge of machine shop practices, capabilities and limitations
• Knowledge of assembly and material handling
• Familiar with welding processes
• Knowledge of TeamCenter is a plus
 
Job Number: 7997
Job Location: Denver, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/23/2017
Last Updated: 12/04/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Mechanical Design Engineer

Location: Decatur, AL
Pay Rate: DOE
Duration: 1 year W2 contract
**MUST be a U.S. CITIZEN**

Description:
• Bachelor's degree or higher
• Mechanical Design Engineer to support production tooling design
• 10+ years experience
• Proficient in CAD modeling and drawing creation – NX version 10
• Develops system, mechanism and component model designs and drawings
• Proficient with structural designs and mechanisms
• Capability to perform system integration and system level trade studies to optimize designs for manufacturing, production and performance
• Knowledge of machine shop practices, capabilities and limitations
• Knowledge of assembly and material handling
• Familiar with welding processes
• Knowledge of TeamCenter is a plus
 
Job Number: 7973
Job Location: Decatur, AL
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 year
Start Date: ASAP
Input Date: 09/27/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer III – Ground Support Equipment
SUMMARY:
this Mid-level Mechanical Engineer will work in a team environment on all aspects of definition and development of Mechanical Ground Support Equipment (MGSE) for build, test and recurring operations of the Dream Chaser space vehicle. The candidate will work with the flight hardware design to define MGSE needs, act as the Point of Contact (POC) for specific MGSE, and provide direction and support to other team members with POC responsibility. Candidate will oversee suppliers for design, fabrication, and test, assisting the Ground Support Equipment (GSE) Lead to manage cost, schedule, and risk, for all Dream Chaser related MGSE, ensuring that it meets the program requirements.

PRIMARY RESPONSIBILITIES INCLUDE:
• • Read and interpret blueprints, technical drawings and schematics
• Originate specifications, control documents, verification and validation plans, procedures, reports, or other documentation in support of design and development activities
• Work with other Engineers to implement operating procedures, resolve system issues and provide technical information
• Prepare material for, and conduct, periodic design reviews
• Ensure conformance of products with Engineering design and performance specifications
• Execute engineering design and development activities consistent with Customer quality, cost, and schedule requirements
• Conduct research that test and analyze the feasibility, design, operation and performance of equipment, components and systems
• Estimate costs and submit bids for Engineering
• Initiate problem solving for new product designs and as well as existing products
• Select, initiate the procure process, install, checkout, and acceptance test hardware
• Support development of test plans and procedures, conduct of end item verification and validation
• Participate in design integration with requirements and industry standards

ADDITIONAL RESPONSIBILITIES INCLUDE:
• Punctuality to work each day and prepared to work scheduled work hours
• Planning and execution of system field deployment, and sustained O&M field activities
• Ability to provide solutions to a wide range of technical problems
• Other duties as assigned

EDUCATION:
• Bachelor’s degree in Mechanical engineering or related field with 6+ years of professional experience
REQUIRED SKILLS:
• Experience developing Concept of Operations and developing Architecture/Design for ground support equipment
• Experience with mechanical design processes (preliminary and final design and with the design review process.)
• Experience with Engineering life cycle processes and procedures
• CAD experience in one or more of the following: SolidWorks 2014,NX 8.5, Creo 3.0
• Experience placing new equipment into service including development of validation and operation procedures
• Proficiency with PC based MS Office products such as Word, Visio and Excel
• Possess good oral and written communication skills
• Ability to rapidly work with minimal supervision on projects involving both small and large engineering teams
• Previous experience and skills in project definition, simulation, implementation, lab integration and test
• Familiar with System analysis (FEA, thermal, Acoustic, Center of Gravity and Environmental lighting, EMI/EMC)
• Familiar with Safety Hazard Analysis mitigation and Functional Failure Modes and Effects Analysis

DESIRED SKILLS:
• Experience in Hardware document control (WindChill)
• Experience with Non-conformance dispositioning
• Experience developing test plans and procedures
• Experience with technical management of suppliers (SOW and specification development)
• Experience with creating, managing and updating Bill of Materials
• Knowledge of component level environmental testing, Environmental test experience – Vibration, Shock Tests, Thermal, Humidity, Motion, dust and Water Protection, etc.
• Familiar working with rugged equipment
• Familiar with Manufacturing / product development processes (Work Orders, Quality Inspections, and Material Control etc.)
 
Job Location: CO
Input Date: 11/08/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Level 2

Description:
Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

**MUST be a U.S. Citizen**
**MUST have an Active Secret Clearance or have had one within the last 2 years**

Job Description:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- Selected candidate will perform all Liaison duties for the program.
- Candidate will closely interact with the Engineering team to ensure all required data is available for new drawing release and document revisions, interact with other functions like manufacturing, and subcontracts to process change requests, set up the Liaison process, track open items via page and line. - Selected individual must be proficient in the use of Windchill, Creo and Catia, have excellent verbal, presentation and written skills and be able to work with a diverse team of internal and external customers/suppliers.

Skill/Experience/Education
Mandatory:
**MUST have an Active Secret Clearance or have had one within the last two (2) years**
- BS degree in Mechanical Engineering, or equivalent related education and experience.
- CAD expertise per job description (Windchill, CREO and Catia).
- Knowledge of LMC drawing practices is desired, and previous LMC experience is a plus.
 
Job Number: 7844
Job Location: Orlando, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 09/05/2017
Last Updated: 02/05/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

Mechanical Engineers

Description:
3D CAD, FEA a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: annmarie@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design & Analysis Engineer II - CA

Description:
Basic Qualifications:
• Bachelors’ degree in Mechanical Engineering, Physics, Material Science or related field + 2 years relevant experience
• Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
o Use of block part libraries
o Generation of multilayer drawing packages, detailed assembly views, and schematics
• Demonstrated working knowledge of basic GD&T principles
• Sound working knowledge of Finite Element Analysis techniques and basic thermal analysis, preferably using Inventor Pro Suite Analysis package (including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
• Background in tooling design a plus


Essential Job Functions:
Design solar panels and solar panel components in AutoCAD / Inventor Pro Suite. Also design and update searchlight and advanced illumination assemblies in AutoCAD / Inventor Pro Suite as required.
Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others. Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
Work with Illuminations Engineers to generate and update part and assembly documentation needed for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and model management in VAULT.
Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective. Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT principles to all generated and reviewed designs.
Provide support to tooling design team on an as needed basis.
Use Finite Element Analysis to support new design development and Root Cause investigations.

Knowledge Desired:
Candidate must be proficient and efficient in use of AutoCAD / Inventor Pro Suite 11 (or higher) in both 2D and 3D and have a sound working knowledge of basic GD&T principles.

Candidate must also have prior knowledge and experience in generating and running finite element analysis, preferably using Analysis package in AutoCAD / Inventor Pro Suite.

Ability to compile and present data using excel and powerpoint, and to generate/update procedural documentation using MS Word, a strong foundation in mechanical engineering and/or material science, as well as familiarity with basic physics of solar cells, Aerospace materials, and assembly techniques, PCBs and electronics are all considered as pluses.
Essential Physical/Mental Requirements:
Candidate must be highly adaptable to meet changing priorities in support of manufacturing, engineering, and marketing needs. Must have good people skills and be able to communicate effectively with a diverse group of both internal and external customers and colleagues.
Must be willing to embrace change and learn new skill sets as needed in order optimize processes and procedures and address balancing workloads in a dynamic market environment.
Special Requirements:
The ideal candidate should be flexible, able to support evening and weekend work on an as needed basis, and self-motivated. Must be adept at working in a fast paced environment to complete scheduled milestones as planned.

Bachelors degree in Mechanical Engineering, Material Science, Physics, or related field + 2 years relevant experience (or equivalent certification) in Computer Aided Design.

Experience Desired:
Must be proficient in:
• reading/generating electrical schematics
• quickly generating 2 and 3 D models using block part libraries
• use of multi-layer drawing structure
• generating assembly detail views

The ideal candidate must also have a demonstrated working knowledge of basic GD&T principles for evaluating manufacturing tolerances and dimensional stack-ups, and have prior experience in generating/running finite element analysis models. Prior experience in use of Autodesk VAULT is highly desired.

Experience in packaging design and/or wiring assembly is also desirable.
 
Job Number: MechEngIICA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 10/17/2017
Last Updated: 11/03/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Metrology Engineer II

Savannah, GA
Long Term Contract
Pay Rate: DOE

Unique Skills:

Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***


Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions:
1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions:
1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements:
1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.

Languages Required (in addition to English): No Selection
 
Job Number: 8148
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/27/2017
Last Updated: 01/24/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Electrical Engineer

Description:
One of the world's leading heavy-truck manufacturers is looking for an Electrical Engineer to join their team!
Apply Engineering and CAD principles to design vehicles that are safe, reliable, serviceable and competitive.
Independently analyze and proactively provide creative, technically-feasible solutions to problems encountered in validation and production. Promptly resolve plant build issues.
Create and maintain vehicle electrical schematics, wiring designs, electrical wiring harness designs, and support the development and improvement of related design/release standards and processes. Support Mechatronics cost savings initiatives.
Become an expert on vehicle electrical systems.
Research, load, and maintain 3D models and 2D symbols of all electrical parts in the NX, and Capital CAD Libraries.
Work closely with other work groups within the Mechatronics department, other departments and suppliers to integrate new technology into all facets of electrical designs of vehicles.
Provide technical support for general use electrical components, (i.e. connectors, terminals, relays, cables, switches, circuit breakers, fuses, etc) to Engineering, Purchasing, Manufacturing and suppliers.
Research general use electrical components, including part numbers, series, dimensions, drawings, performance, availability, and part relationships and resolve questions regarding general use of these electrical components with a high level of technical expertise and support.
Review and process new and revision requests for general use electrical components and determine that requirements are met.
Maintain and populate electrical systems data, for example Electrical Connector database, circuit identification numbers.
Maintain, create and release electrical component part numbers and drawings.
Work with vendors regarding existing and proposed electrical components.
Coordinate design release between engineers and CAD design group.
Support component cost saving initiatives and design/release process improvements.


Basic Qualifications
A Bachelors degree in engineering with Electrical/Electronics or Mechatronics discipline and three years of design experience, or an Associates degree with 5 years of experience is required.
Knowledge of DC electrical circuit analysis required.
Basic vehicle electrical system knowledge is preferred.
Knowledge of vehicle assembly plant processes is preferred.
Experience identifying and solving the root cause of complex problems is required.
The candidate must have the ability to work well with a diverse group of internal and external customers.
Experience with internal systems is preferred.
Understanding of engineering processes & downstream impacts is required.
Knowledge of other functional areas through project involvement is required.
Must have excellent verbal and written communication skills, and computer skills (PC/MS Office and mainframe).
Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.
Computer skills (PC skills, MS office tools, mainframe)
Knowledge of Mentor Graphics Capital Harness Systems (CHS) and NX is strongly preferred.

The Wiring Design Group is responsible for implementing wiring designs into our various truck models based on feature specifications for features which require electrical wiring. The Wiring Design Group is responsible for the standards and processes which support those activities. Also, the Wiring Design Group is responsible for the selection and release of individual electrical components which are used in wire harnesses and cables and the standards which control those items.

With the advancement of technology, the Mechatronics area of the automotive and heavy truck industry is growing rapidly. This position is a good starting point for anyone interested in Mechatronics systems engineering in the automotive industry and more specifically, automotive wiring.
 
Job Number: 4360
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 18 months
Start Date: 12/11/2017
Input Date: 11/10/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Mechanical Design Engineer IV (Propulsion)

Description:
Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Duration: 1 year contract
Shift: 1st Shift

** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
- Perform and support mechanical design activities for high speed propulsion components and assemblies from concept through final detailed design.
- This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
- Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
- Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
- Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd. Applicant must have prior aerospace design or development experience associated with design of actively cooled structures operating in high heat flux environments.
- Under general direction, performs engineering design assignments requiring a wide application of advanced principles, theories and concepts in the field plus a working knowledge of other related disciplines.
- Perform propulsion system to airframe and test article to test facility integration.
- Provides imaginative, thorough, and practicable solutions to a wide range of technical design problems.
- Performs design calculations to validate design requirements.
- Provides data in support of contract data requirements list (CDRL) submittals.
- Participates in preliminary and critical design reviews, drawing reviews, recommending changes as necessary.
- Participates as a member of a project team.
- Responsible for escalating in a timely manner when commitment dates of assigned and individual work cannot be met.
- Check engineering drawings, design packages and related data for compliance to contractual requirements, accuracy, completeness and geometric tolerance standards.
- Work is reviewed upon completion for adequacy in meeting objectives.
- Inter-organizational and resident customer contacts are frequent while outside customer contacts are occasional in providing solutions to technical problems associated with specific assignment.

Skills:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Working knowledge of geometric dimensioning and tolerancing (GD&T), the ability to read and interpret drawings and related specifications is required.
- Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
- Prior propulsion to airframe and test facility integration experience desired.
- Knowledge of Computer-Aided Design (CAD – Siemens NX preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
- Knowledge of design practices, manufacturing techniques and inspection requirements. May require the use of various computer systems to produce data, analysis and reports.
- Position requires experience using CAD database management tools (WindChill preferred).
- Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
- Working knowledge of Microsoft Word and PowerPoint is required (MS Word, MS Powerpoint).
- Knowledge of manufacturing techniques and inspection requirements is a plus.

Education:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **
- Bachelor’s or Master’s degree in an appropriate discipline and nine (9) years of related technical experience as engineering designer or equivalent combination of education and experience.
 
Job Number: 7961
Job Location: Jupiter, FL
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/23/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Structural Engineer -

Description:
Principal Structural Engineer

PE Required in state of CA

Local Candidates Only - No Relo


Ready to put your engineering expertise designing key oil and gas design projects- Do you enjoy being involved on a wide variety of engineering tasks on multiple, complex structural projects.

Company extensive experience in this field, combined with your advanced engineering knowledge, will move your career forward with opportunity to lead teams. We need our engineers to be versatile, enthusiastic to work in highly flexible, team-oriented environment and who have exceptional communication, analytical and leadership skills.

In this role you will design a variety of structures by applying advanced construction/engineering techniques and analysis. You will inspect site conditions to ensure suitability for the designed permanent works.


Give advice on constructed matters. Observe site safety procedures. You may be asked to inspect construction, including temporary works to ensure compliance with approved methods and contract requirements. Maintain records of inspections, work executed, etc.

RESPONSIBILITIES:

Working on construction site, assists Resident Engineer with implementing structural engineering practices and related standards.
Structural engineering systems subject matter expert
Develops and implements QA procedures to ensure quality control performed by others is properly implemented throughout the program and assigned projects.
Reviews standards for materials and equipment to ensure they are in accordance with the specifications and LEED sustainability plan.
Performs constructability, buildability, and maintainability reviews, especially as related to structural systems.
Reviews shop drawing and construction-phase submittals when issues arise that require specific technical assistance.
Provides input regarding all energy efficiency and performance standards.
Reviews design drawings and specifications at periodic check points as required by the PMP milestones.
Participates in value engineering and scope and budget reconciliation when required or requested.
Writes detailed reports related to structural engineering of projects and confers with project and program managers as requested.
Supports the needs of other discipline leads for input to their efforts.
Makes site trips to collect structural engineering related data and construction contractor performance.
Qualifications - External Qualifications:

10 to 12 years of structural engineering design experience with concrete and steel design experience in heavy industrial and oil/gas required
Bachelors degree in Civil engineering, with structural concentration
Professional Engineer registration REQUIRED
Proficiency in utilizing CAD and PC software engineering packages
Must meet customer security requirements and complete a background check by federal authorities
 
Job Number: 361461
Job Location: Bakersfield, CA
Rate: $62hr
Per Diem: no
Duration: temp to hire
Start Date: asap
Input Date: 10/26/2017
Last Updated: 01/08/2018
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
12+ months contract
Englewood, CO

Job Summary

Responsible for all Engineering aspects of the implementation of assigned projects. Coordinates engineering projects in terms of budget, schedule, performance and certification requirements. A leader in the organization with important influence on all technical. Aids in ensuring adherence to contracts, system or product specifications, FAA and Quality standards. Follows and improves processes and ensures team discipline and adherence. A key member of the technical staff, this position is highly influential in the development and direction of the organization. As such, the position should bring new ideas to work. Contribution on a personal or individual level as well as the leadership role is required.

Supervisory Responsibilities

This is a lead engineering role, and the candidate is responsible for serving as a team leader. This position has no direct supervisory responsibilities such as hiring, firing, and compensation plan development...

Qualifications

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position.

Education & Experience
•Bachelor’s degree (BS) in Mechanical, Aeronautical, Aerospace or related engineering field from four-year college or university; and seven to ten years’ related industry experience and/or training; or equivalent combination of education and experience.
•Professional Engineer and/or Master’s degree (M.A.) in Mechanical, Aeronautical, Aerospace or related engineering field preferred
•7-10 years project/program management experience
•7-10 years previous experience in project management, design, analysis and certification of aircraft systems working with engineering staffs of military and civilian aircraft manufacturers
•Analysis, design and development experience in aviation field preferred
•Strong knowledge and understanding of design process and manufacturing processes

Skills
•Strong business acumen with the ability to understand business situations, strategies, theory, processes, management, budgeting and operations
•Ability to multi-task efficiently, works in a fast paced environment on multiple projects, and has a strong attention for detail
•Excellent written and verbal communication skills
•Ability to be a team player with a professional attitude
•Strong interpersonal skills and a high degree of collaboration at all levels

Computer Skills
•Experience with CAD software (Solid works /Auto Cad preferred)
•Proficient with Microsoft Suite, including Word, Excel, PowerPoint and Outlook
 
Job Number: 52702
Job Location: Englewood, CO
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/07/2017
Last Updated: 11/09/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer / Component Product Engineer II - III (Valves & Actuators) CA

Description:
160214/7333750
Job Title: Project Engineer / Component Product Engineer II - III (Valves & Actuators)

Number of Positions: 2

5 to 10 years of experience

Duties: ** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** This is NOT a Designer role. Please make sure that all candidates with a Designer background or expectation are aware of this **

** Manager likes to see college GPA's on resumes **


-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.

Skills: -Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.
Education: BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 3 years experience in related field. MSME/AE degree is highly desireable.



Skills: Required
• PROJECT ENGINEER
• COMPONENT ENGINEERING

State/Province: California
City/Town: Canoga Park



Start Date: 09/11/2017 Hours Per Week: 40.00
Est. End Date: 03/11/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7333750
Job Location: Canoga Park, CA
Rate: 45/hr max
Duration: 6 month contract
Input Date: 10/12/2017
Last Updated: 12/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer CAD Technology

Description:
Job Title: Project Engineer CAD Technology
Location: Portland, OR 97217
Duration: 18 Months
Description
 One of the world's leading heavy-truck manufacturers is looking for an Electrical Engineer to join their team!
 Apply Engineering and CAD principles to design vehicles that are safe, reliable, serviceable and competitive.
 Independently analyze and proactively provide creative, technically-feasible solutions to problems encountered in validation and production. Promptly resolve plant build issues.
 Create and maintain vehicle electrical schematics, wiring designs, electrical wiring harness designs, and support the development and improvement of related design/release standards and processes. Support Mechatronics cost savings initiatives.
 Become an expert on vehicle electrical systems.
 Research, load, and maintain 3D models and 2D symbols of all electrical parts in the NX, and Capital CAD Libraries.
 Work closely with other work groups within the Mechatronics department, other departments and suppliers to integrate new technology into all facets of electrical designs of vehicles.
 Provide technical support for general use electrical components, (i.e. connectors, terminals, relays, cables, switches, circuit breakers, fuses, etc) to Engineering, Purchasing, Manufacturing and suppliers.
 Research general use electrical components, including part numbers, series, dimensions, drawings, performance, availability, and part relationships and resolve questions regarding general use of these electrical components with a high level of technical expertise and support.
 Review and process new and revision requests for general use electrical components and determine that requirements are met.
 Maintain and populate electrical systems data, for example Electrical Connector database, circuit identification numbers.
 Maintain, create and release electrical component part numbers and drawings.
 Work with vendors regarding existing and proposed electrical components.
 Coordinate design release between engineers and CAD design group.
 Support component cost saving initiatives and design/release process improvements.

Basic Qualifications
 A Bachelors degree in engineering with Electrical/Electronics or Mechatronics discipline and three years of design experience, or an Associates degree with 5 years of experience is required.
 Knowledge of DC electrical circuit analysis required.
 Basic vehicle electrical system knowledge is preferred.
 Knowledge of vehicle assembly plant processes is preferred.
 Experience identifying and solving the root cause of complex problems is required.
 The candidate must have the ability to work well with a diverse group of internal and external customers.
 Experience with internal systems is preferred.
 Understanding of engineering processes & downstream impacts is required.
 Knowledge of other functional areas through project involvement is required.
 Must have excellent verbal and written communication skills, and computer skills (PC/MS Office and mainframe).
 Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.
 Computer skills (PC skills, MS office tools, mainframe)
 Knowledge of Mentor Graphics Capital Harness Systems (CHS) and NX is strongly preferred.

The Wiring Design Group is responsible for implementing wiring designs into our various truck models based on feature specifications for features which require electrical wiring. The Wiring Design Group is responsible for the standards and processes which support those activities. Also, the Wiring Design Group is responsible for the selection and release of individual electrical components which are used in wire harnesses and cables and the standards which control those items.

With the advancement of technology, the Mechatronics area of the automotive and heavy truck industry is growing rapidly. This position is a good starting point for anyone interested in Mechatronics systems engineering in the automotive industry and more specifically, automotive wiring.
 
Job Number: 4360
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 18 Months
Start Date: ASAP
Input Date: 11/13/2017
Firm Name: OLSA RESOURCES INC
Attention: Sarabjit Saxena
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II/III

Description:
Location: Canoga Park, CA
Rate: $40.00 - $55.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
- Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, igniters).
- Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support; test planning, vendor/supplier integration and coordination.
- Supports combustion devices hardware through the entire product life cycle.
- Analyzes and verifies product design and performance for adequacy and reliability.
- Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
- Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


Skills:
- General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
- Ability to read and interpret blueprints, technical drawings and specifications;
- Ability to communicate clearly and concisely;
- May require the use of engineering test equipment, CAD, and/or various computer systems.
- Ability to operate effectively in a team environment.


Education:
- Bachelor’s degree in an appropriate discipline/science and two (2) years directly related experience as an associate engineer or equivalent combination of education and experience.
 
Job Number: 7818
Job Location: Canoga Park, CA
Rate: $40.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/07/2018
Last Updated: 03/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer II/III / engineering degree required CA

Description:
160212/7333291

Job Title: Project Engineer II/III
Need degreed engineer
55/hr max

6 openings

Duties: ** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Position is for a development engineer in support of development of rocket engine combustion devices hardware (injectors, combustion chambers, nozzles, ignitors).
Responsibilities include design support, trade studies, hardware development, specification preparation and release, fabrication support, test planning, vendor/supplier integration and coordination.
Supports combustion devices hardware through the entire product life cycle.
Analyzes and verifies product design and performance for adequacy and reliability.
Supports investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards or safety initiative activities.
Interfaces with other members of project or program teams, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.


Skills:
General engineering/science background; Understanding and use of analytical, design or process procedures pertinent to the particular field of engineering.
Ability to read and interpret blueprints, technical drawings and specifications; Ability to communicate clearly and concisely; May require the use of engineering test equipment, CAD, and/or various computer systems.
Ability to operate effectively in a team environment.

Keywords:
Education:
Bachelor's degree in an appropriate discipline/science and two years directly related experience as an associate engineer or equivalent combination of education and experience.

Skills and Experience:
Required Skills:
PROJECT ENGINEER
COMPONENT ENGINEERING

# of Positions: 1

Location:
Canoga Park, CA

Schedule:
Start Date: 09/11/2017
Estimated End Date: 03/11/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
Standard Schedule:
Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7333291
Job Location: Canoga Park, CA
Rate: 55//hr max
Duration: 6 month contract
Input Date: 03/19/2018
Last Updated: 03/27/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer/Component Product Engineer II-III (Valves & Acutators

Description:
Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** This is NOT a Designer role**
-Position is for a Component Product Engineer / Project Engineer for the development, fabrication and test of rocket engine valves and actuators.


Skills:
-Experience with liquid rocket propulsion systems desired.
-Understanding and use of analytical, design or process procedures pertinent to Rocket engine valve and actuator advanced development.
-Ability to read and interpret technical drawings and specifications, develop planning and procedures for assembly and test; Ability to communicate clearly and concisely; effective presentation and report writing skills will be required.
-Project skills in developing MS Project scheduling and Earned Value Measurement Systems is a plus.
-May require the use of engineering test equipment, CAD, and/or various computer systems.
-Ability to operate effectively in a team environment.
-Demonstrated leadership skills are highly desireable.

Education:
BS Degree in Mechanical Engineering, Aerospace Engineering is required, plus 5 - 10 years experience in related field. MSME/AE degree is highly desireable.
 
Job Number: 7823
Job Location: Canoga Park, CA
Rate: $35.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/11/2017
Last Updated: 12/18/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer (Automotive)

Description:
Quality Engineer

Location: Oshkosh, WI
Duration: 12 months

Description:
This positions will be focused upon assisting production launch activities for a vehicle platform which has been out of production for a number of years, but is now being brought back into production.
The production environment has changed dramatically since it was last produced and will generate new issues not previously experienced. In addition, the Quality environment has changed dramatically since the vehicle platform was originally produced.
We expect PPAP (Production Part Approval Process) to contribute to much of the required engineering effort as the supporting effort will require production documents and part prints to be revised.
There will be a need to be detail oriented for these issues. The vehicle platform has not previously been subject to the PPAP process and many issues are expected to emerge with the production restart.
In addition, there is a parallel effort to design a second variant on this platform which will require new part designs and prints created.
With every Engineering Change Notice there is much design detail direction and checking which will require attention to design finer points.
This effort would be conducted under guidance of the platform lead engineer.

Perform high level, non-supervisory engineering analysis and design of new and modified components in accordance with engineering standards and project scope.

Essential duties and responsibilities:
- Researches, studies, and proposes use of new technologies to be used in the development of new and improved products
- Maintain effective communication with suppliers, internal and external customers, and outside resources concerning technical issues
- Enforce the proper use of engineering criteria and drawing standards. Ensure that technical issues are conducted within the framework of company policies and procedures
- Evaluate designs for performance, safety, and reliability
- Directs preparation of layouts, drawings, specifications, and bills of material
- Perform engineering analysis to support the selection of parts, components, and materials that meet requirements
- Perform job duties in an ethical, professional manner which is consistent with the Client Way. Conduct duties consistent with the Company’s mission statement, quality objectives, and defined policies and procedures
- Provide technical assistance for prototype, pilot, and production support
- Analyze and resolve issues reported to Engineering via verbal or written communication
- Provide direction to designers and drafters regarding engineering analysis
- Establishes priorities for work delegated to others
- Prepare technical proposals, quotations, reports, and presentations
- Able to obtain a secret security clearance as required by job duties

Basic qualifications:
- Bachelor’s of Science in Engineering
- 3-plus years related experience
Must meet ITAR requirements

Preferred qualifications:
- Experience with a high level cad system
- Possess a strong mechanical knowledge of vehicles and related systems
- Strong verbal presentation and written communication skills
- Excellent time management and organizational skills

A few more details from call with the manager:
Involve in-product platforms
Troubleshooting to understand what production line is experiencing, then establish what engineers need to do to fix problem; alter print package or get involved in changes to work instruction on production line (others complete the work but needs to understand what needs to be changed, updated and driven in to documentation).
Expectation to be on shop floor as needed. Other Eng have that as primary role, need to be a liaison b/w office and shop floor support engineers.
Should have a good understanding of CAD, however likely will not be involved in actual CAD work, needs to understand design and drawings and be able to assist designers with design concept.
 
Job Location: Oshkosh, WI
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 months
Start Date: Asap
Input Date: 11/28/2017
Last Updated: 12/08/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Solidworks Designer/Drafter

Description:
Job Title: Drafter/Designer
Location: Sandpoint, Idaho
Duration: 9 months +
Rate: Open, DOE
Hours/Days: 7:30 AM to 5:00PM, Monday through Friday
Designer/Drafter Job Overview:
Under general supervision, develop, revise and maintain engineering product definition including preparation of solid models, schematics, flat patterns, or drawings of sheet metal or CFRP components, electrical devices, control tools, structures, etc. from data and specifications submitted by designers or engineers.
Designer/Drafter Essential Job Functions:
Designs and/or modifies components or subsystems to include planning, layout, drawing and revising detailed parts, assemblies, and/or installation drawings.
Compile BOMs and specification sheets
Collaborate with other designers on new and special work
Revise drawings as necessary and initiate engineering change orders
Creates and modifies detailed drawings using SolidWorks software from sketches, layouts or notes provided by engineering
Coordinates and resolves tolerance, fit, material or manufacturability issues.
Contributes design modifications to facilitate manufacturing operation or quality of product
Work with engineers regarding model accuracy, design, drafting standards and change notice documentation.
Must perform well in a fast-paced R&D environment.
Must be a self-starter and possess a sense of confidence and humility.
Skills and Background Required :
General understanding of aircraft structure, wiring and systems
Proficiency with SolidWorks and ASME drawing standards
Proficiency using PDM software & working in PDM environment.
Work style that is detailed, organized and reliable
A strong work ethic
Attitude to do what it takes in a small business
Certificates and Licenses Required:
Associate of Arts in Mechanical Design
8+ years of experience
Equipment and Software used:
Windows 7 PC
CAD Software: SolidWorks
MS Office: Excel, Word, PowerPoint, Outlook
The Structures Company LLC is an AA/EOE.
 
Job Location: Sandpoint, ID
Rate: up to 60/hr
Per Diem: yes
Duration: 9+ months
Start Date: February 2018
Input Date: 11/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer

Description:
Seeking candidates for a digital design engineering position. In this position, you will be part of a team designing next-generation digital visible and infrared image sensors. You will work with senior digital design engineers to implement digital blocks (1k – 100k gates) in a variety of CMOS nodes (from 180nm to 28nm). A successful candidate will excel at collaborating in a fast-paced multidisciplinary team environment working to develop cutting-edge image sensor products.

Required Skills:
• Core expertise in writing RTL, synthesis or place and route (Cadence tools preferred)
• Experience with Verilog and or SystemVerilog, writing RTL and test benches
• Understanding of digital design fundamentals including synchronous digital design principles and timing closure
• Experience with full digital design flow from writing RTL through synthesis, static timing analysis and place-and-route.
• Experience with scripting languages including TCL
• Experience with Cadence Encounter
• Experience with an Analog-on-top digital design flow

Desired Skills:
• Experience writing behavioral models for digital circuits and analog/mixed signal interfaces and circuits
• Experience with Conformal
• Experience with a Digital-on-top mixed-signal design flow
• Minimum of five years of industrial gas turbine engineering experience preferably with a gas turbine OEM or gas turbine packager within the 3 to 10 MW power range.
• Experience working within manufacturing/quality and product procurement, support and service engineering.
• Experience with structural (stress) analysis, finite element codes (ANSYS or equivalent)
 
Job Number: 377878
Job Location: SEATTLE, WA
Duration: 13 months
Start Date: asap
Input Date: 10/31/2017
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Electrical Engineer II

Description:
Sr Electrical Engineer II

Description
Raytheon Vision Systems is seeking candidates for a digital design engineering position. In this position you will be part of a team designing next-generation digital visible and infrared image sensors. You will work with senior digital design engineers to implement digital blocks (1k – 100k gates) in a variety of CMOS nodes (from 180nm to 28nm). A successful candidate will excel at collaborating in a fast-paced multidisciplinary team environment working to develop cutting-edge image sensor products.

Electrical Engineer Digital Design Engineer
Requirements
*Required Skills: (Make as explicit as possible. These should not contain comparative or non-objective skills.)

• Excellent communication skills
• Core expertise in writing RTL, synthesis or place and route (Cadence tools preferred)
• Experience with Verilog and or SystemVerilog, writing RTL and test benches
• Understanding of digital design fundamentals including synchronous digital design principles and timing closure
• Experience with full digital design flow from writing RTL through synthesis, static timing analysis and place-and-route.
• Experience with scripting languages including TCL
• Experience with Cadence Encounter
• Experience with an Analog-on-top digital design flow

Desired Skills: (Can be comparative and subjective (if non-discriminatory). Need not be explicit and should not contain must haves, or required skills.) • Experience writing behavioral models for digital circuits and analog/mixed signal interfaces and circuits • Experience with Conformal • Experience with a Digital-on-top mixed-signal design flow

Electrical Engineer Digital Design Engineer
 
Job Number: 7711939
Job Location: Goleta, CA
Rate: OPEN DOE
Duration: 12 Months
Start Date: ASAP
Input Date: 10/19/2017
Last Updated: 11/27/2017
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electro/Mechanical Engineer

Description:
Experienced design engineer to assist the design and development of new Medical/Patient Care solutions. Take concepts to prototype using SolidWorks 2016. Provide Solid Models & Detailed Manufacturing drawing based off of client CAD standards. Experience with new product development (preferably Medical Devices). 6-8 yrs. Electro/Mechanical design experience. PDM Experience.
 
Job Number: 5678
Job Location: Danbury, CT
Rate: $55
Per Diem: Split
Overtime: Possible
Duration: 18 Months
Start Date: ASAP
Input Date: 11/08/2017
Firm Name: TRIMECH SERVICES LLC
Attention: Alicia Cecil
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Airframe Design Engineer / NX and FiberSIM / strong composites experience required CA

Description:
14722/160693

Title Staff Airframe Design Engineer
60/hr max

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group at General Atomics Aeronautical Systems. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:
•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education. Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals. Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems. Must be able to work both independently and in a team environment. Able to work extended hours as required. A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.
Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.
- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.
- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.
- Experience with NX and FiberSIM highly desired
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-14722
Job Location: San Diego, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/21/2017
Last Updated: 12/01/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Support Equipment Design Engineer IV CA

Description:
7610419

Job Title: Support Equipment Design Engineer IV

Number of Positions: 2

Remaining Positions: 1

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Ground Support Equipment (GSE) experience is required.

(Aerospace Assembly Support Equipment Design & Product Design Experience / Position requires knowledge of aerospace handling, installation and transportation methods and products to support / In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines / Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines) **



** Creo experience is required **



** 10+ years experience and a Bachelors Degree or equivalent are required **



Under minimal supervision, performs engineering clean sheet design assignments requiring a wide application of CAD utilization, Data management/drawing tracking & Design Change implementation.
Must be able to turn requirements into design concepts for team reviews and finalization of Technical Product Definition packages.
Leads preliminary and critical design review preparations.
Participates as a member of a project team responsible for escalating issues in a timely manner when commitment dates of assigned and individual work cannot be met.
Review engineering drawings, design packages and related data for compliance to internal process requirements, accuracy and completeness.
Support to Inter-organizational Product Teams are frequent and providing solutions to technical issues is required.


Skills:
Aerospace Assembly Support Equipment Design & Product Design Experience Required (GSE).
Position requires knowledge of aerospace handling, installation and transportation methods and products to support.
In this position you will be required to gather technical requirements from various operations, manufacturing, assembly and component disciplines.
Support Equipment for Engine assembly, test and delivery of Large Liquid Rocket engines.
Must be an experienced engineer with a knowledge of CAD using PTC Creo2.
Position requires experience using CAD database management tools (Windchill/Teamcenter preferred).
Pre-verification of CAD models and drawings in the PLM system is also required.
Effective interpersonal and communication skills and must be able to operate effectively in a team environment.
Expert knowledge of reading and interpreting drawings and related specifications is also required.
Expert knowledge of Microsoft Word, PowerPoint and Excel is required (MS Word, MS Powerpoint, MS Excel) to track assignments of Product teams.


Education:
Bachelors degree in an appropriate discipline and 10 years of related technical experience as engineering designer or equivalent combination of education and experience.
Experience in Design and Manufacturing is a must.

Skills:
Required

GROUND SUPPORT EQUIPMENT CREO AEROSPACE

State/Province: California
City/Town: Canoga Park

Start Date: 12/11/2017 Hours Per Week: 40.00
Est. End Date: 06/10/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7610419
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/17/2017
Last Updated: 11/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer

Description:
Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Duration: 1 year contract


Duties:
-Performs engine system level design tasks for liquid rocket engines.
-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills:
-CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education:
-Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.
 
Job Number: 8031
Job Location: Canoga Park, CA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 10/09/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
T3 Engine System Design Engineer / CREO2 3D CAD modeling skills with technical product design experience in liquid rocket / aerospace systems CA

Description:
7352963
Job Title: T3 Engine System Design Engineer

Duties: -Performs engine system level design tasks for liquid rocket engines.

-Primary duties include working within an integrated product team (IPT) environment to design/revise engine system components utilizing PTC CREO2 3D CAD software, coordinating analysis support and releasing drawings/models with minimal supervision.
-Additional duties may include in-house/vendor fabrication and test support as needed.

Skills: -CREO2 3D CAD modeling skills with technical product design experience in liquid rocket/aerospace systems.
-Knowledge of geometric tolerancing & dimensioning, machining and fabrication processes.

Education: -Bachelor of Science in Mechanical Engineering or related engineering degree is preferable.

Skills and Experience:

Required Skills:

CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
AEROSPACE SYSTEMS ENGINEERING
WINDCHILL

Additional Skills:

CAD
CAD SOFTWARE
DESIGN ENGINEER
ENGINEER
FABRICATION
PRODUCT DESIGN
SYSTEM LEVEL
SYSTEM LEVEL DESIGN
T-CARRIER
MACHINING
PTC
TEST SUPPORT
AEROSPACE
AEROSPACE SYSTEMS
ANALOG SILICON
AUTO CAD
CAD MODELING
ENGINES
LEVEL DESIGN
MECHANICAL ENGINEERING

Minimum Degree Required: Bachelor's Degree

# of Positions: 1

Location:
Canoga Park, CA

Start Date: 10/31/2017
Estimated End Date: 10/30/2018
Hours Per Week: 40.00
Hours Per Day: 8.00
 
Job Number: MB-7352963
Job Location: Canoga Park, CA
Rate: 55/hr max
Duration: 12 month contract
Input Date: 01/09/2018
Last Updated: 01/16/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
TEMP Manufacturing Engineer (2nd Shift) (Fibersim) CA

Description:
13954

Title TEMP Manufacturing Engineer (2nd Shift) (Fibersim)
Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We currently have an exciting opportunity for a TEMP 2nd Shift Manufacturing Engineer with our ASI Division.

Experience
•Proficient with CAD (Creo and/or Pro E) and Siemens NX/FiberSIM PLM software
•Working knowledge of composite part design and fabrication methods
•BS in Mechanical Engineering, Composites Engineering or comparable work experience
•Experience working in commercial and/or military aircraft manufacturing environments
•Familiar with composite lamination drawings and process specifications
•Previous hand layup experience with prepreg material is a plus

Job Tasks
•Perform detailed review of composite part CAD model and lamination drawing (solid and honeycomb panel designs)
•Generate surface geometry representing tool and honeycomb core layers, generate boundary curve geometry for individual plies from the applicable CAD models and drawings
•Utilize Siemens NX and FiberSIM PLM software package to produce a composite manufacturing solution for complex parts that abide to engineering process specifications
•Generate Flat Pattern and Laser Projection files using FiberSIM
•Create Powerpoint PlyBook files from Flat Patterns, for use by the Manufacturing Engineering group in lamination work instructions
•Provide support to manufacturing engineering on shop floor when needed

Qualifications Essential Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
Additional Qualifications Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; four or more years of experience with a bachelors degree or two or more years of experience with a masters degree. May substitute equivalent engineering experience in lieu of education. Must have a complete understanding of engineering concepts, principles, codes, and theory; experience demonstrating a broad application of those concepts; and, expanding knowledge of principles, concepts, theory, and practices in related technical specialties. Must possess the ability to understand new concepts quickly; apply them accurately throughout an evolving environment; organize, schedule, and coordinate work phases; and, determine the appropriate approach at the task level or, with assistance, at the project level to provide solutions to a range of complex problems. Must have excellent communication, computer, documentation, presentation, and interpersonal skills, ability to work independently and as part of a team; able to perform complex tasks in one engineering area; and, lead a team of less experienced professional employees on semi-routine tasks. Able to work extended hours as required. A Professional Engineering License is desirable.
City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Temp Assignment Duration (# of Days) 240
 
Job Number: JE-13954
Job Location: San Diego, CA
Duration: 8 months
Input Date: 12/11/2017
Last Updated: 01/08/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer- Mechanical

Description:
Technical Designer- Mechanical

Location: Sylmar, CA
Duration: 6+ months

Job Description:
Design solar panels and solar panel components in AutoCAD / Inventor Pro Suite. Also design and update searchlight and advanced illumination assemblies in AutoCAD / Inventor Pro Suite as required. Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others. Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings. Work with Illumination Products Engineers to generate and update part and assembly documentation needed for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and model management in VAULT. Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective. Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT principles to all generated and reviewed designs. Provide support to tooling design team on an as needed basis.

Education / Experience:
AA degree in related discipline and typically 5 or more years of related experience or an equivalent combination of education and experience.
At least 2 years of experience in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
- Use of block part libraries
- Generation of multilayer drawing packages, detailed assembly views, and schematics
- Demonstrated working knowledge of basic GD&T principles
- Background in tooling design a plus

Skills:
Category Name Required
Software Skills AutoCad No
Technical Skills CAD No

Skill Code: 636-Mech and Structural Design
 
Job Location: Sylmar, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Months
Start Date: asap
Input Date: 10/26/2017
Last Updated: 11/13/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology.
 
Job Location: Savanah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/13/2017
Last Updated: 03/09/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer - Level 3

Description:
Test Engineer - Level 3

Location: Dallas, TX
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 14 month W2 contract
Shift: First, 9/80, OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a DoD SECRET CLEARANCE**

Description
-Analyze complex electronic devices and circuitry to design automated card level test equipment (ATE), establish hardware and software test requirements, design and document ATE, integrate ATE software and hardware, and demonstrate ATE work product completion.
-Must be interested in working with both hardware and software, must be able to complete tasks per established schedule, and must have strong writing and communication skills.

Skill/Experience/Education/MANDATORY:
-One of the following degrees: BSEE or BSEET or BSCE
-Agilent 3070 Series III Test Development experience: (4-5+ years' experience required)
-Boundary Scan programming: (4-5+ years' experience required)
-Fixture design: (4-5+ years' experience required)
-Microsoft Office applications: (1-3+ years' experience required)
-Strong writing and communication skills

Desired:
-Agilent device programming (Flash, EEPROM, CPLD): (1-3+ years' experience desired)
-JTAG Tech programming: (1-3+ years' experience desired)
-TestSight CAD translation: (1-3+ years' experience desired)
-CKT1175 programming: (1-3+ years' experience desired)
-Perl: (1-3+ years' experience desired)
 
Job Number: 8014
Job Location: Dallas, TX
Rate: 50-70
Per Diem: Split Possible
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 10/20/2017
Last Updated: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal Engineer

Description:
Candidate must be able to obtain a security clearance.

Experience with CAD modeling using PTC CREO, FORTRAN programming, CFD software (Star CCM+, FlowEFD), and Siemens NX CAD and Thermal/Flow software suite. Experience with MATLAB and Mathcad.
Creativity/innovation to solve issues related to thermal design performance of any aspect of thermal systems. Experience developing and analyzing in thermal design of thermal management systems. Experience calculating internal and external convection coefficients of simple and complex geometries and being able to research literature when necessary.
Experience writing environmental and component specifications, and system/subsystem/component test plans. Considered an emerging authority.
 
Job Number: 41056
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/08/2017
Last Updated: 11/21/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer

Description:
Turbomachinery Mechanical Design Engineer

Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.


Skills:
-Knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-May require the use of various computer systems to produce data, analysis and reports.


Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience required.
 
Job Number: 8041
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 10/25/2017
Last Updated: 01/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / CREO / turbomachinery, rotating machinery experience required CA

Description:
160525/7351950
Job Title: Turbomachinery Mechanical Design Engineer

Number of Positions: 5

Remaining Positions: 5

Duties:
** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.

-This position requires the development of design concepts, 3D models, and support the development of detailed drawings for the manufacture of parts.

-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.

-Develop design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.

-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.

-Applicant must have prior turbomachinery design or development experience.

Skills:
-Knowledge of geometric dimensioning and tolerancing.

-Ability to read and interpret drawings, blueprints and related specifications.

-Ability to write clearly and concisely.

-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.

-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 preferred) and Computer-Aided Manufacture (CAM) methods and techniques.

-Knowledge of design practices, manufacturing techniques and inspection requirements.

-May require the use of various computer systems to produce data, analysis and reports.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.


Skills:
Required

GEOMETRIC TOLERANCING GEOMETRIC DIMENSIONING AEROSPACE DESIGN CREO

State/Province: California
City/Town: Canoga Park

Start Date: 11/06/2017 Hours Per Week: 40.00
Est. End Date: 05/06/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-7351950
Job Location: Canoga Park, CA
Rate: 70/hr max
Duration: 6 month contract
Input Date: 01/22/2018
Last Updated: 02/01/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Harness Packaging Engineer

Description:
Creation of 3-dimensional CAD packaging models of the different vehicle wiring harness commodities such as chassis, engine, dashboard & cab.

Creation of harness formboard layout drawings for all vehicle wiring commodities.

Design of the bracketry required to mount and secure wiring harnesses throughout all the areas of the vehicle.

Support design engineers in the implementation of short term and long term ongoing production issues.



Core Functions/Duties (% Time)

Execute 3-dimensional packaging layouts and their mounting systems throughout all areas of the vehicle. 60%

Support execution of design changes to address ongoing production issues. 20%

Creation of harness formboard layout drawings 20%



Qualifications

Bachelor's degree with 2 year of related experience (preferred) OR an associate's degree with 2 years of related experience OR 4 years of related experience required



Experience, Skills, Abilities:

Demonstrated 3-dimensional NX working experience (Required)

Demonstrated electrical harness packaging working experience (Required)

Working knowledge of client Documentation systems (Preferred)

Teamwork skills, including cross-functional collaboration (Required)

Excellent verbal and written communication skills (Required)

Understanding of engineering processes & downstream impacts (Preferred)



The individual(s) will be supporting a team of Design Engineers to complete harness packaging studies of all electrical wiring over the entire vehicle platform. The direct team consists of approximately 5 engineers. Person must be willing to receive and give feedback in a positive manner. They must also exhibit excellent verbal and written communications skills as they can possibly participate in meetings from time to time, as well as interaction with other teams throughout client. This role will consist of being fully involved in the development of new harnesses for medium duty trucks. Will also be involved in and participate in the electronic components.
 
Job Number: 17-18927
Job Location: Portland, ORE
Duration: 17 months
Start Date: 11/20/2017
Input Date: 11/06/2017
Firm Name: ICONMA LLC
Attention: Eric Janda
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/321-3508
800 Phone: 855/686-4768
Website: www.iconma.com

Back to Advanced Job Search