Job Search Results

884 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/19 Tuesday 03:29AM Pacific Time by ContractJobHunter. )

Listings 1 - 884

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2588 - PNEUMATICS - MECHANICAL SYSTEMS SPECIALIST - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (8) years.

Possess very good knowledge in Pneumatic and Mechanical Control Systems and their integration on the aircraft.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces integration, testing and installation.

Have a background in design, integration, development and certification of Mechanical Systems.

Previous experience in providing engineering support to a Final Line/Production would be an asset.

You have a background in design, integration, development and certification of Propulsion Systems.

Must have good knowledge of DO-160, FAR/CAR25 Regulations.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

FUNCTION

Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Pneumatic/Mechanical Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2588
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2589 - DESIGN ENGINEER - CV in 'word doc - only'

Description:
Have a degree in Mechanical Engineering with eight (8) or more years of experience in a similar position.

Have experience in equipment design in an aeronautical context.

Have excellent knowledge of CATIA V5 design and modeling software.

Have a good understanding of the components, operation and installation of the various systems on board an aircraft.

Have experience in test engineering, instrumentation, engineered parts design and sheet metal parts are important assets.

Have strong sense of responsibilities, good practical and technical judgment and a high level of flexibility.

Demonstrate dynamism, good listening and a strong interest in teamwork.

Are familiar with Microsoft Office software such as PowerPoint and Excel.

Exceptional relational and editorial skills in English and French.

Membre of the Ordre des Ingénieurs du Québec (OIQ) an asset.

Essential: Registered in the Canadian Controlled Goods Directive (CGD) Program - non-US citizens nor Green Card holders or permanent resident.

FUNCTION

Perform 3D design and assembly drawings for flight test equipment for Special Mission Aircraft under the guidance of the Section Chief / Supervisor and the Senior Engineering Specialist.

Interpret the technical specifications for test and instrumentation specifications and technical requirements that meet the design criteria for your entrusted design mandates.

Ability to manage priorities in a context of parallel, multiple and complex deliveries.

Ability to work under pressure to meet design deadlines (DPS).

Find technical solutions to simplify or improve the design.

Support the manufacturing team as needed.

Work in collaboration with the experimental shop.
 
Job Number: 2589
Job Location: Canada
Rate: 51 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2590 - PROJECT ENGINEER - CV in 'word doc - only'

Description:
Have minimum of 10 years%u2019 experience in project management in the aerospace, transportation or other field where you have taken on increasing level of responsibilities and demonstrate the ability to handle more complex projects.

Training or Bachelor's degree in Project Management, Engineering, or relevant experience in the aeronautical / transportation fields.

Have an extensive management and supervisory experience that will differentiate you from other candidates and make you a prime candidate for this position.

Have a Project Management Professional (PMP) Certification from the Project Management Institute (PMI).
Exceptional relational and editorial skills in English and French.

Are familiar with Microsoft Office software such as PowerPoint, Excel and MS Project.

FUNCTION

Have experience in leading and driving engineering and fabrication activities for internal resources as well as third party Engineering service suppliers.

Leadership, ability to have a strategic perspective with a global vision.

Strong organizational, interpersonal, time management and communication skills.

Be autonomous and a critical thinker in order to take the right decisions.

Be confident and have experience in multidisciplinary team coordination.

Ability to assign tasks effectively and then follow up with thoroughness and rigor.

Be a team motivator, collaborator and promote the valorization and respect of others.

Have resilience, openness to change and manage stress positively.

Have good cost and contract management skills.
 
Job Number: 2590
Job Location: Canada
Rate: 56 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant - Clearance VA

Description:
166910
Job Title: Administrative Assistant

Work Site Address: Manassas, VA 20110
Job Number: 2743-1
Max Pay Rate: $42.00/hr
Start Date: 11/25/2019
End Date: 2/19/2021
Position Type: Contract

Job Summary:
Performs a variety of administrative duties for security and asset management personnel.

Verifies clearances and briefings for visitors. Assign daily lab entry badges to cleared personnel, as well as give direction on the usage and policies regarding them. Sign packages and notify personnel upon receipt. Label unclassified items i.e. laptops with appropriate property stickers. Ensure the lobby safe is locked and secured properly upon assumption of duties. Directing and informing new hires and foreign visitors on the security policies involved while on site. Perform lab walk throughs each shift to ensure no classified assets are left unsecure, improperly or not marked to lab standards. Distribute and file security briefing forms for lab workers, i.e., physical access, IS account, or administrative work acknowledgements to lab security. Perform daily lab asset scanning using a provided scanning schedule.

Qualifications and Education Requirements
BS Degree is NOT required
Proficient use of Microsoft Office to include Word and Excel is desired.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel No 1 < 1 Year Software Skills MS Word No 1 < 1 Year Qty 1 position This position is 5/40 2nd Shift
 
Job Number: LMRMS-2743-1S
Job Location: Manassas, VA
Rate: 42/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Support - no clearance NY

Description:
166667
Job Title: Administrative Support

Work Site Address: Syracuse, NY 13221
Job Number: 2494-1
Max Pay Rate: $19.60/hr Max Bill Rate:
$26.46/hr
Start Date: 11/4/2019
End Date: 11/4/2020
Position Type: Contract


Job Summary: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board.
Utilize hi-speed print production printers, wide-format production printers, folders, punches and cutters to produce high-quality materials for distribution.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Responds to telephone and email inquiries concerning the status of customer's work order and general duplication questions; notifies customers when orders are completed; resolves questions or issues related to production.
Collates, folds, staples, binds, cuts, drills, mounts, and packages printed materials according to job specifications. Interface with customers to determine requirements and priorities.
Performs basic maintenance of all production equipment including preventive maintenance and general cleaning; contacts service representative for machine problems requiring major repairs. Performs data entry function to create job tickets for tracking and billing purposes. Maintains inventory of paper and other supplies. Keeps work areas orderly, clean, and safe; ensures proper care in the use of equipment and supplies. Performs miscellaneous job-related duties as assigned. Able to lift boxes of paper and perform repetitive print production tasks.
Xerox high-speed and wide format printer operation, finishing operations including folding, cutting, binding, etc. Set up jobs in PDF using Fiery software (OTJ training).

Qualifications and Education Requirements
Basic Qualifications
> - Previous experience in a high-volume, fast-paced print shop
> - Experience with high speed and wide-format print operations
> - Able to work overtime, extended shifts, weekends
> - Ability to multitask and shift priorities based on business needs
> - Outstanding interpersonal skills, team player, customer-oriented
> - Self-starter, comfortable working alone or with a team
> - Outstanding organizations skills
> - Able to listen to, understand and follow written or oral
> instructions
> - Ability to lift up to 50lbs
> - Valid Driver’s License
Desired skills
> - Experience in a digital print production environment
> - Experience scanning hard copies to data files
> - Experience with Adobe Pro
> - Experience editing and adjusting PDF files
> - Experience with Microsoft Office Suite
> - Experience running Xerox production print equipment
> - Experience using FIERY software including Impose/Compose and
> Jobmaster


Skills: Category Name Required Importance Experience
Software Skills Adobe Acrobat Yes 1 1 - 2 Years
Software Skills MS Office Yes 1 1 - 2 Years
Technical Skills Ability to Edit, Process, and Implement Work Orders No 1


Qty 1 position
 
Job Number: LMRMS-2494-1
Job Location: Syracuse, NY
Rate: 19.60/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Support - no clearance NY

Description:
166643
Job Title: Administrative Support

Work Site Address: Owego, NY 13827
Job Number: 2375-1
Max Pay Rate: $21.00/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
Performs variety of activities in support of human resources for a specific project.

Gathers, collects, records, tracks and verifies data and information from multiple sources. Compiles, reviews and analyzes data. Uses software for functional area, to compile and generate individual records. May assist with processes to enhance work flow. Provides data and information to others on functional unit processes and procedures. Performs routine, repetitive, and basic tasks where precedent, methods and processes are well established. Makes simple decisions, but refers most to more experienced personnel.

Qualifications and Education Requirements
No BS required
High School diploma, or equivalent experience/combined education and less than 1 Year of experience.
Must have the required skills.
Moderate understanding of general job aspects and superficial understanding of the technical phases of the job.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Microsoft Suite Yes 1 1 - 2 Years
Software Skills Nuance Power PDF Yes 1 1 - 2 Years
Technical Skills Basic Computer Skills Yes 1 1 - 2 Years

Qty 2 positions
This is a non-exempt level 1 position. Apprentice or Trainee.
Manager is looking for particular skills set. However it is a very basic position.
 
Job Number: LMRMS-2375-1
Job Location: Owego, NY
Rate: 21/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Simulations System Engineer

Description:
*This is a 6 month contract position located in Orlando*



We are hiring a contract an Aerospace System Engineer with particular skills in integrating simulation software into military vehicles. Besides the normal duties of system engineering (maintaining and creating timelines/milestones, cost and schedule creation, requirements development, decomposition, derivation and allocation, integration expertise, working with IPT/SEIT, integration teams, technical planning, system verification/validation), candidate will need to be well versed in simulation software integration specifically, with software such as WARSIM, JSAF, EPIC, P3D, Titan Vanguard.



A good amount of the work will involve simulation training and simulation domain including Joint, Live, Virtual & Constructive (JLVC) training systems architecture, simulation interoperability architecture such as Test and Training Enabling Architecture (TENA), and simulated terrain and entity model generation tools.



Required:
*5 years’ experience in Simulation System Engineering, integration, V&V, simulation training, etc.
*Basic requirements development (DOORS), verifying HW&SW, and V&V
*Support software implementation through requirement and model interpretation and maintenance
*Experience in Systems Engineering Integration Teams (SEIT); software implementations; Model Based System Engineering (MBSE) methodologies
*Specific simulation training experience with Joint, Live, Virtual & Constructive (JLVC) training systems architecture, Training Enabling Architecture (TENA), Collective training knowledge
*Experience leading a team.
*Able to travel internationally about 25% of the time and able to work 2nd shifts as needed.
*Able to apply and gain a Secret Clearance upon starting; US Citizens only please



Pluses:
*Simulation applications (two or more of the following) WARSIM, JSAF, EPIC, P3D, Titan Vanguard
* Real-time platform wargaming IEEE standards such as High-Level Architecture (HLA) and Distributed Interactive Simulation (DIS)
* Military tactical data link networks such as LINK11 and/or LINK16
* Simulation interoperability architecture such as Test and Training Enabling Architecture (TENA)
* Simulated terrain and entity model generation tools and processes
 
Job Number: 539
Job Location: Orlando, FL
Rate: $63.92
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Application Developer

Description:
•Bachelors degree in Computer Science, Information Systems or a related field.
•3+ years of IT work experience in software development, installation, modification in an online environment, and systems administration.
•Knowledge of some SEO principles.
•Excellent knowledge of browser troubleshooting and debugging practices and techniques.
•Ability to design mobile-based features and UI/UX designs.
•Strong knowledge of state-of-the-art web programming design, coding, testing, and debugging.
•Web applications development using: HTML/HTML5, CSS, Angular 7, JavaScript, jQuery, .Net Core, Microsoft SQL, C# and JSON.
•Knowledge and experience with Web Content Management Solutions.
•Experience in full System Development life cycle.
•Experience with various development methodologies (e.g., Waterfall, Agile, JAD, etc…).
•Possesses knowledge of web development technologies (e.g., .NET, Visual Studio, etc…).
 
Job Number: 11192019
Job Location: Tallahassee, FL
Rate: 65.00 -75.00 hourly
Per Diem: yes
Duration: L-T
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Associate Engineer Tool / Catia NX CAD CA

Description:
166939
Associate Engineer Tool (Contract) (Job Number: 19032843)

Number of Openings: 1

Location(s): United States


Shift: 1st Shift

Target Start Date: Jan 6, 2020

Target End Date: Jan 1, 2021

Pay rate: $33.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo, CA
Work schedule: 9/80

Aerospace Sector is looking for an Associate Tool Engineer I (contract) for tool design across multiple programs. Your work will play a critical role in the company’s mission of preserving freedom and advancing human discovery.

Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation’s history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We continue to innovate with developments from launching the first commercial flight to space, to discovering the early beginnings of the universe. Our employees are not only part of history, they’re making history.

In this role, the selected candidate designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.


Basic Qualifications:

Bachelor's Degree in Science STEM (Science, Technology, Engineering, or Math)
CATIA/NX experience (or other CAD software)



Preferred Qualifications:

Proficiency with CATIA/NX or other CAD software
 
Job Number: JK-1816ATO
Job Location: El Segundo, CA
Rate: 33/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / F-16 datalink systems / integration test- Clearance TX

Description:
166533 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2183-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Exp w/ Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
Experience with the verification and sell off of a subsystem to a customer through formal test events.
Experience developing subsystem design/engineering documentation.
Experience with Agile Software Development and/or SCRUM processes.
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation
Strong Interpersonal & Collaboration Skills
Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.


Qty 1 position
 
Job Number: JE-2183-1S
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1


Qty 2 positions
 
Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Buyer / Procurement Analyst - no clearance NJ

Description:
166568
Job Title: Buyer/Procurement Analyst

Work Site Address: Moorestown, NJ 08057
Job Number: 2363-1
Max Pay Rate: $29.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract


Job Summary:
Join our fast paced, ever changing, and rewarding Northern Material Acquisition Center, (NMAC), team and help to secure the national future by supporting some of our major products including Sikorsky military and commercial helicopters, Space Fence, Aegis Combat System, LRDR, K-Max, MH-60, F-35, TPQ-53 and VLS (Vertical Launching System). Our business is exciting and challenging and will offer the candidate an opportunity to contribute and learn many aspects of the supply chain strategies and logistics. From making groundbreaking discoveries to building innovative futuristic technologies, we're engineering tomorrow.

This position supports a high volume global supply chain team. Specifically, the role will support Supply Chain data analytics projects and supplier strategy efforts. The successful candidate will be a valued member of our buyer team and the supplier management team Assisting in order placement and manage suppliers to ensure the timely delivery of supply chain requirements for a variety of commodities such as electrical, mechanical, capital equipment and professional services by expediting orders, work with supplier quality and engineering to resolve receiving issues, monitor flow of critical material and provide status for open orders.

Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Qualifications and Education Requirements
BS+0-3 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills MS Excel Advanced Yes 1 1 - 2 Years
Software Skills SAP Yes 1 1 - 2 Years

Qty 1 position
Must have business experience
 
Job Number: JE-2363-1
Job Location: Moorestown, NJ
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C, C++ RTOS Software Engineer Secret Clearance

Description:
*This is a 1 year, contract position, located ON SITE in Orlando, FL*


We are hiring a contract Real Time embedded C++ software engineer who will be working on Secret/Top Secret projects for a military/DoD subcontractor. The position requires a candidate with strong background in the full development lifecycle including architecture design. Applicant will be working on supporting integration of software functionality into tactical military hardware.


All work is conducted ON SITE only, by US Citizens who are actively SECRET Cleared


Required
*4-8+ years in a DoD software role, developing software in embedded C/C++.
*Experience with VxWorks/Linux or Integrity RTOS environment

*Experience in Configuration Management (CM)

*Current Active (or active in last 2 years) Secret Clearance; which requires US Citizenship in order to apply.
*BS degree in Engineering, Computer Science or equivalent



Pluses:
*Familiar with communication busses/protocols such as RS-232, RS-422, MIL-STD-1553 and Ethernet
*Experience with CM tools Razor, Accurev, Git, JIRA, SVN.
*Familiarity with Visual Studio (i.e., Visual C++).
*Experience developing with C#, familiar with Qt
*Development in an Open architecture, multi-core processing environment.
 
Job Number: 175
Job Location: Orlando, FL
Rate: $80.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer / Process Engineer

Description:
Create the process and methodology of producing aerospace parts by CNC milling, create NC code for automated 5-axis milling operations, design all fixturing and tools necessary, document and continuously improve process

Qualifications & Responsibilities:
• Determine process and methodology in which the part will be produced
• Design fixturing, including modeling and making drawings of necessary components
• Proper cutting tool selection and understanding of feeds and speeds optimization
• Write NC code for 5-axis CNC machines using NX software and customer supplied solid models or prints (and model creation when none is supplied)
• Confirms process validity by utilizing Vericut simulation software (previous experience not mandatory, but preferred)
• CNC machine set-up, trial running, debugging and optimization of programs
• Creates in-process prints/set-up sheets for shop use with proper dimensioning and tolerancing
• Competent understanding of GD&T and tolerance stack-ups
• Interpreting of customer supplied prints to ensure correct intent
• Document and continuously improve process
• Optimize production planning to meet scheduling demands
 
Job Number: 123123123
Job Location: New Britain, CT
Rate: Very Competitive
Per Diem: Permanent Position
Duration: Permanent Full Time position
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Management Specialist

Description:
We have an outstanding Contract to Hire position for a Configuration Management Specialist to join a leading Company located in Cincinnati, OH.

**Position requires U.S. Citizenship.**

As a company of choice, the incumbent will maintain engineering specifications and other related technical records. Compiles and classifies data to existing product records, establishes new product files, changes specification records to suit engineering revisions. Provides information as requested by the engineering department, sales department, cost accounting, etc., having to do with product, unit and part numbers and specifications, standard relationships, drawing numbers, etc.; issues new drawing numbers, part identification numbers, etc., through the operation of an established control system. Assists supervisor in analyzing and correlating specifications to standardized units and parts on related products to affect interchangeable parts, reduce manufacturing cost, cost of inventories, etc. May oversee/conduct other related activities

Major Responsibilities:
Manages the implementation of CDM Procedures and operating instructions. Develops new operations aimed at improving overall department efficiency.
Accepts responsibility for such items as CI Identification, Change Control, configuration status accounting (CSA) and audit preparations.
Reviews and analyzes released engineering change data and coordinates changes with engineering, quality, support, manufacturing, and engineering data control activities.
Reviews Request for Proposals (RFP’s) to identify special CDM requirements.
Reviews SOW’s and SOR’s, for CDM requirements, determine if our current system can accommodate requirements.
Provide input for selection and identification of hardware/software configuration end items.
Supports contractual baselines and schedules.
Coordinates CDM requirements with Customer representatives.
Conducts a project CCB.
Performs job task utilizing MRP/ERP and document management applications.
Process engineering change requests (ECR’s), Government ECP’s, Requests for deviation and request for waiver through the data management system.
Provides Status Accounting reports.
Assists with formal and informal configuration audits.
Basic Hiring Criteria:
A minimum of a High School Diploma or equivalent is required for this position.
Desired Qualifications:
Associate's degree preferred.
Defense background in CM and preferably not commercial (if commercial…airline, manufacturing, software, food & drug, experience would be transferrable).
NDIA Certification or willingness to obtain certification within 6 months.
Experience with DoD CM forms and Standards CM Status Accounting Requirements and CM Plan Compliance and Creation.
Preferred candidates will have experience using CostPoint Version 7, TipQA and PDF Editors.
 
Job Number: 39186
Job Location: Cincinnati, OH
Rate: $33 - 43 DOE
Overtime: Every other Friday off
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design
 
Job Number: 19-15064
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: Immediately
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Development Engineer - Android/Linux Application

Description:
Morson International is currently recruiting for a Development Engineer for a global organization specializing in biometric identity solutions. This is a fantastic opportunity for a Development Engineer to further their career and experience in the Biometric technology field with a large international company.
Job Description:
• Minimum of 2 years of experience in imaging software development in both Android and Linux system.
• We would like someone to join our team who is a strong verbal and written communicator, coachable, great technical troubleshooter and able to work multi-tasking and handle workloads under time constraints.
• As a Mobile Android/Linux Application Development Engineer for the Biometric R&D hardware team located in Pasadena, you will be a part of developing next generation biometrics hardware devices, including biometrics capture devices for fingerprint, palm print, facial and iris. You will be joining a collaborative environment focused on innovation and development of disruptive core technologies that secure the digital lives of millions of people.
• Conduct the research and development in the areas of biometrics mobile devices for biometrics identity information capture and search transaction.
• Responsible for designing and implementing the applications for biometrics hardware systems to achieve highest image quality requirement, form factor limitation, reliability requirement.
• Work with image processing specialists to design and implement the imaging system considering background removal, contrast enhancing, image rescaling in order to achieve the required image quality.
• Work with other firmware, software, optical, mechanical and industrial design engineers to formulate solutions to meet all final product requirements.
• Support products to internal and external customers for knowledge transfer, bug fixing, continuous evolution, as well as life cycle product management.
Skills:
• 3+ years of experiences
• Android applications, Embedded Linux software application development experiences.
• Working experiences using C, C++/C#, JAVA, Javascripts
• Xamarin platform development
• Service-oriented programming (SOA)
• Security software programing using SSL, TLS,
• Programming experiences on ARM processor and Digital Signal processor platform.
Desirable Skills:
• Security software and hardware experiences using PKI, AES/DES/SHA protocols
• Communication protocols such as TCP/UDP/IP, UART, SPI, I2C
• Peripheral device programming, USB, GPIO, Timers, Camera interface
• Apple iOS application (XCode) development
 
Job Location: Pasadena, CA
Rate: $70/hour
Per Diem: No
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MORSON INTERNATIONAL
Attention: Philip Power
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter & Prepress Technician

Description:
Job purpose



This is a newly created hybrid role that will play a big part in the future success of our organization. Overarching responsibilities include the creation of detailed panel and elevation drafting including high-resolution graphics along with the preparation of print files from standard and customer supplied art for digital print production.



Duties and responsibilities



Panel and Elevation Drafting

  • Analyze internal request details along with customer supplied details.

  • Work with Inside Sales department to rectify issues with customer-supplied information.

  • Prepare individual panel drawings and elevations in Adobe Illustrator.

  • Create low-resolution FPO images in Adobe Illustrator or Adobe Photoshop from standard or customer supplied art files for placement in individual panel drawings and elevations.

  • Ensure all drawings and elevations accurately display the products we intend to make.

  • Verify that all drawings and elevations show only what we can produce.




Preparing High-Resolution Graphics for Production and Archiving


  • Analyze customer supplied art files for correct format and resolution.

  • Work with Inside Sales and Manufacturing departments to ensure all aspects of the job are being considered for timely and correct completion.

  • Prepare full-size high-resolution graphics in Adobe Illustrator and Adobe Photoshop for production by sizing and scaling appropriately.

  • Monitor job output and ensure color match and consistency to house standards.

  • Document all pertinent settings used for job production to ensure repeatability.

  • Perform archive and file maintenance duties as needed.




Qualifications


  • Proficient in the latest versions of Adobe Illustrator and Adobe Photoshop, preferably on Mac.

  • Advanced skills and knowledge of Adobe Illustrator, 3 years' experience or greater.

  • Prior drafting experience.

  • Ability to work cross-platform Mac and PC.

  • Strong color correction skills in Photoshop.

  • Strong problem-solving skills.

  • Strong communication skills, both verbal and written.

  • Attention to detail and ability to manage multiple assignments concurrently.

  • Ability to work in a fast-paced environment.

  • Digital and/or Commercial Print production experience a plus.

  • Experience with RIP software, specifically Onyx and Wasatch a plus.

  • Familiarity with construction drawings.




Working conditions



Office environment with a typical workday from 7:00 am to 3:30 pm Monday – Friday (hours include 1/2 hour lunch break). Occasional after-hours and weekend work may be required.



Physical requirements



Office environment, no physically strenuous activities will be performed.







Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-45150
Job Location: Phoenix, AZ
Rate: 20.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-10-31 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Darnell
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Drafter / Drawings / AUTOCAD - Clearance URGENT NC

Description:
166223 Job Title: Drafter/Drawings

Work Site Address: Fort Bragg, NC 28303
Job Number: 2016-1
Max Pay Rate: 50/hr
Position Type: Contract
Desired Start Date: 12/9/2019
End Date: 6/9/2020

Qualification
Drafter with the following to be considered:
* Must have building floor plan design experience
*As-built experience

Additional Note
**HM is seeking more qualified resumes for AUTOCAD

Job Summary:
Essential tasks include using AUTOCAD along with production plotters to design building floor plans, utility layouts, maps, master plans and complete engineering projects.

Maintains the FM library of drawings and updates drawing after projects by incorporating As-builts and record drawings along with site information. In cases where As-builts are inadequate, incumbent will draft the necessary information in AUTOCAD for incorporation.

Routinely takes complex input to develop end item drawings to include underground utilities (water, sewer, power and communications), building plans including architectural, structural, fire safety, and security drawings and Scopes of Work (SOW). Incumbent has to independently conduct research to resolve complex issues and problems as a result of errant contractor/user provided layouts, drawings, design specifications and input to ensure design projects are complete and accurate.
Utilizes Microsoft Office software and printers to prepare and maintain construction status reports, various spreadsheets, briefing charts, and general correspondence. Operates, maintains and updates the computerized command building and utility as-built programs to show existing and future construction. Prepares As-Built drawings and plans from engineering technical data and quotes, updates floor plans for specific buildings, special projects and provides drafting support for MILCON, UMC, and O&M construction projects.

Responsible for all Command construction and as-built plans and documentation archival storage, maintenance and reproduction.
Has basic knowledge of schedule software to track and maintain furniture, construction and space allocation schedules for the Command. Prepares status reports and updates of the schedules when needed to brief leadership.
Completes and maintains the ISR-I compliance status for the compound. Communicates with DPW/Real Property and modifications for new facilities.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
Operating Microsoft and AUTOCAD at a journeyman level with basic knowledge of ARC-GIS computer aided drafting and design software.


Qty 1 position needed
This is an urgent requirement. The vacancy requires immediate fulfillment.
 
Job Number: JE-2016-1S
Job Location: Fort Bragg, NC
Rate: 50/hr max
Per Diem: pd split possible
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
The Electrical Design Engineer will contribute to the design, analysis, simulation, test and integration of digital electronic modules, FPGAs, and/or CCAs for a variety of DoD applications.

The qualified candidate will possess general familiarity with all aspects of circuit card and/or FPGA design.

Experience with any of the following sub-disciplines is of particular interest:
• Digital and mixed signal design,
• Configurable logic (FPGA/firmware) design,
• RF Design and
• Power Electronics Design.

The successful candidate is one who can participate in a multi-disciplined team and properly apply engineering tools and processes.

This position requires frequent use of technical standards, principles, concepts and techniques that candidates apply to provide solutions to a variety of technical problems of moderate scope and complexity.

The successful candidates will work in a fast-paced, team-based, and challenging technical environment where an individual with talent and initiative can stand out and thrive under general supervision.

Required Skills:
• Active Secret DoD Security Clearance or the ability to obtain and retain one.
• US Citizenship
• Minimum of 2 years Engineering design experience and a Bachelor’s Degree in Engineering or related STEM field, or a Master’s degree with relevant internship experience
• A self-motivated and effective communicator
• Ability to take a design concept from the block diagram or requirements level and develop a complete hardware design, and verifying via test and integration
• Experience with PCB design tasks and proven ability to use tools to design (schematic capture), analyze and simulate designs prior to hardware execution
• Capable of functioning in multi-disciplined design teams across multiple projects

Desired Skills:
• Experience in the development and design of electronic circuit designs, multi-assembly system/unit design, and processor designs
• Experience using Mentor Graphics Design Creation tools: DxDesigner, xDX Designer VX, and Constraint Editor System (CES)
• Experience using Mentor Graphics PCB electronic circuit design software: HyperLynx signal integrity, power integrity, and analog simulation, Xpedition Enterprise (xPCB)
• Experience with intellectual property generation (patents & publications)
• Team and project leadership skills
• Knowledge of software and/or FPGA code development
• Experience with embedded test techniques, design for test, design margin analysis and design for production

Required Education:
Requires a degree in Science, Technology, Engineering or Mathematics (STEM) and 2 years of related work experience or 10 years of experience in lieu of a degree
 
Job Number: 1910107926
Job Location: Indianapolis, IN
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer 5

Description:
LOCATION Orlando, FL

DESCRIPTION General Summary
Looking for a Sr. Electrical Design Engineer specializing in analog and high-speed digital circuit design to join our Aerospace and Defense team responsible for designing and developing modern communications test systems and solutions. In addition to developing new designs and architectures, the candidate must have solid experience in all phases of new product development; from conception to production.
Principal Duties and Responsibilities
 Responsible for the total end-to-end process of capturing requirements, designing, developing, validating, testing, documenting, and transition to manufacturing of electrical and electronics systems and subsystems.
 Work as part of a cross-functional product development team to effectively plan and execute electrical PCB designs to meet critical project requirements and deadlines.
 Perform schematic capture and direct PCB layout.
 Define and document characterization and calibration methodologies, Validation and Verification (V&V) plans, and lead the V&V process for individual designs.
 Work with cross-functional teams across the United States to support new product development and sustainment activities.
 Mentor other engineers and participate in design review activities.
Job Specifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

POSITION REQUIREMENTS Qualifications
1. Experience and understanding in the application of principles, theories, concepts, practices, and standards relating to modern software-defined architectures and synthetic instrumentation designs.
2. Demonstrated expertise in PCB stackup definition and trade-off analysis, including physical geometry, material selection, crosstalk mitigation, return path management, and manufacturability.
3. Extensive experience with simulation tools, such as LTSpice and HyperLynx
4. Extensive experience and thorough understanding of modern high-speed bus interfaces, including but not limited to USB 3.x, DDRx, PCIe Gen 2/3, Gigabit Ethernet, JESD 204B, and FPGA SERDES interfaces.
5. Experience developing complex mixed-signal designs and architectures.
6. In-depth understanding of schematic capture, circuit design, design tools, circuit simulation, and circuit layout design, techniques, and verification methodologies.
7. Expertise in developing design documentation and test instructions/procedures.
8. Expertise in taking a product design from concept to production.
9. Expertise in design for manufacturability (DFM) and design for test (DFT).
10. Provide technical leadership in complying with regulatory agencies in order to meet safety and Electromagnetic Compatibility (EMC) requirements.
11. Strong analytical reasoning and problem solving skills with knowledge in performing root cause analysis and recommending corrective action to resolve test failures.
12. Ability to act as an engineering lead and subject matter expert for one or multiple concurrent projects involving cross-functional teams in multiple geographic locations.
13. Must be a US person.
Education/Experience:
1. Bachelor’s in Electrical/Electronics Engineering (BSEE) or related field is required, Master’s Degree (MSEE) is preferred.
2. 15+ years of experience in Electrical Design.
Computer Skills:
1. Experience with Altium Designer for schematic capture and layout.
2. Experience with simulation tools, such as LTSpice, HyperLynx, ADIsimCLK, etc.
3. Experience with software and firmware development languages, such as C, C++, C#, VHDL, MATLAB, and LabVIEW is a plus.
4. Proficient in Microsoft Office
 
Job Number: 1001
Job Location: Oralndo, FL
Rate: Hourly Rate
Per Diem: Yes
Overtime: Yes
Duration: 6-12monts
Start Date: Q1
Input Date: 11/14/2020
Firm Name: EXPLEO USA INC
Attention: Faith Wilson
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer, Mixed Signal Hardware

Description:

Nesco Resource along with a client of ours in Scottsdale AZ is looking for an Electrical Engineer to focus on mixed signal hardware. You will be responsible for the design of equipment from the initial circuit and mechanical concepts through release to manufacturing. This position ensures that designs meet product specifications, as well as R&D design standards, and provides technical support on products already in production. The individual who "gets the gig” will work independently, with little supervision and have the ability to take a lead role on complex projects that require multiple engineers.



 



About the Job:



§ Design, analyze, construct and evaluate electronic audio circuits, ensuring that all design standards and product requirements are maintained.



§ Devise solutions to technical problems that arise in products in development and production, including safety and EMC compliance. Create engineering change notices as necessary.



§ Use tools such as PCB layout software, schematic capture software, circuit simulation software, etc.to create and improve product designs.



§ Work with project managers to define project schedules for hardware tasks. Keep project tasks on schedule and help find solutions to mitigate unexpected delays.



§ Work with product development team to integrate digital elements with other parts of the product design.



 



What you Need:



§ BSEE/BSET or equivalent is required.



§ Significant experience in related electronics design. Typically, 5+ years is required, but experience level can vary, depending on relevancy of experience.



§ Advanced design, analysis, and debugging skills sufficient to design electronic circuits for audio products.



§ Proficiency with analog audio design, including discrete and op-amp circuits. Must be familiar with best design practices for low noise and high-quality audio.



§ Familiar with PCB Layout practices for high-speed digital circuits.



§ Experience with design and layout for serial bus protocols (i.e. I2S, USB, I2C, SPI)



§ Experience with Bluetooth / WiFi radios and circuitry is a plus.



§ Experience working with ARM processor platforms.



§ Experience with memory interface circuits such as DDR.



§ Familiar with EMC design practices. Experience with solving EMC and safety compliance problems.



§ Ability to construct electronic circuits using basic tools. Good soldering skills. Experience working with small packages, and small pitch PCB components is a plus.



§ Good technical and non-technical communications skills.



§ Project planning skills.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-35786
Job Location: Scottsdale, AZ
Rate: 100000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-21 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Eilene Salcido
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer

Description:
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include
• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.
• Works under minimal mentorship.
 
Job Number: ESDE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Must Have Active Secret Clearance

Experience developing and integrating real-time simulation code, user interface code, device driver code, data collection code and display code
Previous Missile HWIL experience

Experienced in the use of Concurrent HW
Experience developing real-time embedded software using the Ada and C++ programming languages
Experience developing software for the Linux OS
Experience implementing and testing missile Operational Flight Software
 
Job Number: 47783
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Software Engineer to develop embedded and application software. Selected candidate will integrate algorithms into C++ applications. Candidate is expected to be proficient in C/C++. It is desirable to have experience w/ both Windows Visual Studio & Linux based C/C++ development.

The candidate will need to have the ability to get a Department of Defense security clearance at the Secret level.

It Is required that the candidate have experience with: Embedded software development C/C++ Various host computers including Intel Various real-time operating systems like Linux, VxWorks, Integrity Code and Unit Test Hardware/Software Integration Software configuration management Full software life-cycle development Ability to work with multi-disciplined teams Excellent communication skills
 
Job Number: 47542
Job Location: Orlando, FL
Rate: $80.00
Per Diem: Split
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Software Engineer to develop embedded and application software. Selected candidate will integrate algorithms into C++ applications. Candidate is expected to be proficient in C/C++. It is desirable to have experience w/ both Windows Visual Studio & Linux based C/C++ development.

The candidate will need to have the ability to get a Department of Defense security clearance at the Secret level.

It Is required that the candidate have experience with: Embedded software development C/C++ Various host computers including Intel Various real-time operating systems like Linux, VxWorks, Integrity Code and Unit Test Hardware/Software Integration Software configuration management Full software life-cycle development Ability to work with multi-disciplined teams Excellent communication skills
 
Job Number: 47542
Job Location: Orlando, FL
Rate: $80.00
Per Diem: Split
Overtime: Possible
Duration: 12 Months
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer w/Secret clearance and Ada

Description:
*This is full time, 6 month contract, located in Nashua NH*

CSS Staffing is seeking an Ada Embedded Software Engineer with recent experience with later Ada versions (such as Ada 2012) and its features. Embedded real-time software development experience, object-oriented design, and Linux development environment.



Required:
*8 years software engineering experience using embedded RTOS software

*Ada (later version such as 2012), Linux development environment.
*OOD experience.
*Linux OS as a real-time operating system Structured software development environment, and algorithm development
*Active Secret Clearance; US Citizens only please
*4 year degree in Computers, engineering or mathematics.



Desired:
*Python and Git
 
Job Number: 728
Job Location: Nashua, NH
Rate: 86.20
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: 40.25
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer / F-16 experience is highly preferred / F-22 & F35 experience desired - Clearance CA

Description:
166860 Job Title: Flight Controls Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2648-1
Max Pay Rate: $85.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.

This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will
(1) the coordinate and direct the execution of pre-flight and post-flight activities to ensure aircraft test readiness,
(2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives,
(3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and
(4) coordinate as required with other organizations associated with test readiness.

This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.

Desired Skills
(F-16 experience is highly preferred / F-22 & F35 experience desired)
Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired.
-Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.


Qty 4 positions

Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.
Work location is Edwards AFB
 
Job Number: JE-2648-1S
Job Location: Edwards AFB, CA
Rate: 85/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Control Engineer

Description:
Flight Test Control Engineer

Edwards Air Force Base, CA
$85/hr
15 month W2 contract
Swing Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description
This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Number: 11852
Job Location: Palmdale, CA
Rate: 85.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Develops and documents standardized test methods and processes to ensure repeatability and productivity. Leads the development of test procedures. Applies lessons learned to the improvement of test procedures. Designs calibration system/test fixtures. Develops data processing tools and algorithms. Generates calibration procedures and software. Guides others in the design of test hardware, software and systems to achieve test requirements. Oversees debriefing of the test team. Leads the analysis, processing and formatting of data to customer requirements. Approves test data prior to delivery to customer. Formulates expectations for test data based on historical data. Performs functions as required to ensure calibration system readiness and data validity. Trains others. Works under minimal direction.
 
Job Number: T&E_WA
Job Location: Seattle, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
GNC Engineer

Description:
C/C++, UML or Rhapsody

Desired skills:
Python, Perforce, Git
Orion experience

Job Duties:
Support the development of avionics software-level requirements

Develop Guidance Navigation and Control (GNC) embedded Flight Software Code to meet requirements

Perform Testing as needed at the software level

Support software requirements an
Experience Requirements:

Familiar with Agile Framework and DevOps Concepts

Software C++, Greenhill’s compiler, Java/Python
 
Job Number: 47764-H
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Hardware Development Engineer (JPSS program)

Description:
The candidate will: •Perform Hardware/Electrical Engineering design, analysis and testing of electronics and RF subsystems.
•Represent Hardware Engineering in development and evaluation of system architectures, designs, and interfaces that meet system specifications.
•Prepare and present hardware specifications and design analysis in program reviews.
•Participate in Trade Studies and Vendor/Product selection.
•Participate in engineering discipline process development and deployment on programs.
•Insure organizational processes are followed and create program specific work instructions when necessary.
•Support may also include working with other organizations, coordinating common and efficient cross-factory environments (both hardware and software), tools, process, and methods.

Key responsibilities for the qualified candidate include: •Responsible for assisting in trouble shooting the Space to Ground Interface, including RF equipment and antennas
•Responsible for working with team members to resolve operational issues in an urgent manner
•Responsible to create design documentation, perform reviews with team members and vendors, and follow program and corporate process
•Responsible to work with the team to create System Operating Procedures

Required Skills:
•BS degree in Electrical Engineering specializing in RF and Communications fields
•Experience with RF/Baseband and signal processing design, development, and hardware testing
•Experience with preparing statements that convey the fundamental characteristics of the design objective, creating and presenting reports
•Experience with writing and reviewing manuals, procedures, plans, specifications, engineering drawings and notebooks
•General knowledge of communication protocols, digital signal processing, RF signal types and levels
•General knowledge of common information system (computer) hardware interfaces
•Must be proficient with Microsoft Office applications such as Word, Excel, and Power Point
•Must be familiar with Satellite Ground Station facilities and operations
•Periodic travel required to support upgrades at Ground Stations in CONUS and OCONUS
•U.S. Citizenship status is required. No clearance needed but needs to have ability to obtain a Common Access Card (CAC) to access government systems.

Desired Skills
•Experience with VHDL, FPGA design and coding, firmware and embedded software
•Experience with analyzing system parameters to ensure requirements are met using analytical tools
•Experience with MATLAB
•Experience with performing trade studies, recommending solutions and identifying potential vendors
•Experience with developing bill of material required to produce product and initiate the purchasing process and monitor progress
•Experience with collecting and reporting time and material estimates based on requirements.

Required Education
•Requires a degree in Science Technology Engineering or Math (STEM) with emphasis in RF design and a minimum of 4+ years of experience or 12 years experience in lieu of a degree
 
Job Number: 1910106380
Job Location: Aurora, CO
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HPC (High Performance Computing) Engineer

Description:
Primary Responsibilities

• Assume a technical lead position on the Computer Aided Engineering team. Responsible for championing engineering concerns across the Information Technology Services landscape.
• Operating Systems: RHEL, Centos, Suse, Windows
• Configuration, setup and maintenance of numerous air-gapped networks
• Manage daily break/fix scenarios, updates, backups, monitoring and user requests
• Secure and maintain Linux servers according to DFAR requirements
• Create and maintain SOPs and train junior staff
• Patch management
• Hardware troubleshooting
• Monitor ticket queue to ensure tasks are addressed in a timely manner according to priority
• Strong desire to adhere to best practices and provide the highest quality of service and support
• Monitor and maintain system performance, recommend changes and upgrades


Basic Qualifications

• Have history of configuring HPC simulations to leverage parallel computing.
• Speak to the different use cases of CPU vs GPU in a HPC environment.
• Demonstrate knowledge of a job scheduler to manage a high demand HPC platform across several engineering teams.
• Familiarization in troubleshooting HPC user job scripts against a wide number of engineering software solutions (Ansys, Matlab, Nastran).
• A thorough understanding of engineering license server functionality (e.g., flexlm) and related troubleshooting.
• Strong working knowledge of RedHat Linux subsystems - SSSD/LDAP/Kerberos against AD, NFS, SELinux, IP Tables, MD devices, LUKS, PAM, GRUB, NFS, CIFS, process management and performance tuning
• Must have a demonstrated high level understanding of Clustering, Infiniband, BeeGFS, RAID systems and server hardware
• Understanding of application and OS security, virus scanning, and patching
• Must be able to demonstrate advanced Bash, Python, Powershell, Ruby or Perl scripting skill


Preferred Qualifications

• HPC / PBS Pro
• Bright Computing
• Ansible
• Centrify
• Docker
• Splunk
• Puppet
• Powershell
• Gitlab
• Satellite
• VMWare
• Web API


The Structures Company is an AA/EOE.
 
Job Number: 351
Job Location: CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer - Clearance CA

Description:
166412 Job Title: Industrial Engineer

Work Site Address : Palmdale, CA 93599
Job Number: 2070-1
Max Pay Rate: $75.00/hr
Start Date: 10/14/2019
End Date: 12/10/2020
Position Type: Contract


Job Summary:
Analyzes and designs sequence of operations and work flow to improve efficiencies in plant and production facilities and equipment layouts; and establishes methods for maximum utilization of production facilities and personnel.

May establish or assist in establishing accident prevention measures and may manage training programs for personnel concerning all phases of production operations. Conducts studies pertaining to cost control, cost reduction, inventory control, and production record systems. On the basis of these studies, develops and implements plans and programs for facility modifications and revisions to operating methods. May assist facilities engineers in the planning and design of facilities.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Skills: Category Name Required Importance Experience
Areas of Expertise Lean Manufacturing No 4
Areas of Expertise Project Scheduling No 7
Soft Skills Interpersonal Skills No 7
Software Skills MS Office - Intermediate Level No 4
Technical Skills Data Analysis No 6
Technical Skills Scheduling No 7
Technical Skills Trend Analysis No 3

Qty 4 positions
 
Job Number: JE-2070-1S6
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer 4

Description:
Industrial Engineer 4

Location: Berkeley, MO
Duration:12 Months

Job Description: Leads the application of Industrial Engineering concepts, techniques, analysis and decision tools to promote and implement changes in manufacturing, engineering and service operations. Leads the development of models, data bases and spreadsheets to analyze data (e.g., statistics, operations research, engineering economics), and provides expert analysis and metrics for consultation to customers (e.g., management, departments, suppliers). Leads in the application of extensive industrial engineering techniques and concepts to product and process design teams throughout all phases of product lifecycle, resulting in a robust product design and work statement that meets program requirements. Leads the research, design, development, improvement, and implementation of processes to enhance schedule performance, lower cost, and improve quality, through the expert application of Lean and advanced Industrial Engineering concepts for large scale systems integration and asset utilization. Manages, defines, negotiates, and controls the scope, cost, and timing of projects, and direct the use of project management tools (e.g., work break-down structure, precedence network, resource allocation). Ensures project is completed within budget, and on schedule. Leads the use of engineering methods (e.g., mathematical models, simulation, statistics) to develop optimal process designs and efficient utilization of resources (e.g., facilities, personnel, materials, equipment) in the creation and validation of products. Leads the analysis and design of the value stream, including capability, capacity (e.g., make/buy, supplier selection, risk analysis, supplier performance), throughput, work flow and logistics (e.g., critical path, lead-time, transportation, factory layout). Preferred skills include experience with constraint based scheduling software and/or simulation software (Examples include Aurora and/or Simio)

Education / Experience: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: D26-Mfg Industrial Engrg

As an equal opportunity employer, ICONMA prides itself on creating an employment environment that supports and encourages the abilities of all persons regardless of race, color, gender, age, sexual orientation, citizenship, or disability.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-13283
Job Location: Berkeley,, MO
Per Diem: Split Per-Diem available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information Systems Security Officer (ISSO) - Secret Clearance

Description:
Job Description:

-Identifies key stakeholders in the A&A effort for medical systems and networks and works with them to confirm that the system documentation reflects the current security configuration of the system, in terms of hardware and software components, data flow, interconnections, and ports, protocols, and services



-Identifies potential risks associated with the configuration of the system and appropriate mitigation strategies



-Conducts status meetings and determines next steps in moving the systems toward a successful accreditation effort



-Works with the cybersecurity team to develop and implement the detailed test plan and review findings from self-assessment to determine readiness for independent assessment



-Assist in drafting "Authorization to Operate (ATO) packages for new and existing systems.

-Provide subject matter expertise in all cyber security initiatives and help in explaining new guidance.

-Draft documentation needed to announce new cyber security initiatives and participate building and implementing processes surrounding cyber security.

-Provide cyber security reports to DHA leadership, conduct scans and participate in the process to obtain ATO status for systems determined by DHA and/or MTF leadership.

-Complies with MTF cyber security program implementation plan, and ensures compliance with DHA management policies.



-Assists the system owners and system SAs in interpreting and applying mitigation strategies

-Ensure compliance with data security policies and relevant legal and regulatory requirements in accordance with DHA directives and applicable Risk management Framework (RMF) requirements.

-Ensure appropriate changes and improvement actions are implemented as required.

-Ensure compliance with protection requirements, control procedures, incident management reporting, remote access requirements, and system management for all systems under scope.



Education:

BS degree in Engineering, Physics, Network Security, or Computer Science.



Experience:

Fifteen (15) years of experience in Engineering, Systems Analysis, Medical Systems, Information Assurance, Web Development, or Engineering Management, to include: Technology

Analysis and Assessment, Design Definition, Development of Systems Specification, Systems Analysis, Systems Architecture, Systems/Equipment Integration, Test & Evaluation Criteria, and Logistics support of C4ISR requirements. Must have managerial or supervisory experience in the information technology

arena.



Note: Experience may be concurrent.

Advanced degrees substitute for experience as follows:

Ph.D. five (5) years of experience; MS two (2) years of experience

 
Job Number: 19-47557
Job Location: Rosslyn, VA
Rate: 60.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-12-13 00:00:00.0
Start Date: 2019-12-16 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Peter Voigt
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration & Test Engineer

Description:
Can Start without a Clearance

Update Test Software for Javelin Test Equipment. This effort includes: Redesigning current test software, Integrating test software with legacy test set and new missile development, creating validation plans and certifying Test Equipment for production. Requires programming experience required with HT Basic. Must have experience with highly complex Test Equipment with analog and digital components. This effort requires someone who can work with other E&T departments to develop requirements and strong technical solutions
 
Job Number: 47776
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lab Test Technician(Electrical/Electronic Equipment)

Description:
• Plans, conducts and documents complex tests on products, systems, components, materials, and manufacturing processes and technologies.
• Designs, fabricates, builds and analyzes test systems, materials, components, software and methodologies.
• Coordinates test requirements determines test methods and capabilities.
• Conducts system test preparations by guiding system integration, fabrication, modification, setup, checkout and teardown.
• Performs test article configuration control.
• Conducts complex tests, analyzes data and documents results; participates in test readiness reviews.
• Identifies and resolves test anomalies.
• Troubleshoots and resolves complex laboratory and test-related problems.
• Coordinates test laboratory activities, maintenance and repairs, and personnel training.
• Assists government agencies, safety and hazardous materials teams in the event of emergencies.
• Coaches and trains others.
• Works under minimal direction.
 
Job Number: Test_MD
Job Location: Germantown, MD
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine Operator - 2nd shift / Micrometer CNC Caliper Measuring Tools - no clearance MA

Description:
166770
Job Title: Machine Operator

Work Site Address including City, State, Zip: Marion, MA 02738
Job Number: 2564-1
Max Pay Rate: $19.00/hr
Start Date: 11/18/2019
End Date: 11/16/2020
Position Type: Contract

Job Summary:
Operates light-duty bench- or floor-type machine tools and equipment such as small lathes, power mills, extruding machines, drills or punch presses, power brakes, shears or saws.

May set up machining machines and make adjustments, and perform maintenance on machines. Checks work using prescribed gauges, jigs and fixtures to measure close tolerances. Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
Familiar with Mikrometer, CNC and/or Caliper Measuring Tools.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Computerized Numerical Control (CNC) No 1 < 1 Year Qty 1 position This position is 2nd Shift This position does not require a BS Degree Manager would prefer candidates familiar with Micrometer, CNC and/or Caliper Measuring Tools. Required OT Hrs/Wk: 10.00
 
Job Number: LMRMS-2564-1
Job Location: Marion, MA
Rate: 19/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer

Windsor Locks, CT
$48.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers.

Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications:
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications:
* Candidate must have 10+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11793
Job Location: Windsor Locks, CT
Rate: 48.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer - Clearance KY

Description:
1548-1
Manufacturing Engineer
Work Location: Lexington, KY
Status: Open
Qty: 2
Desired Start Date: 5/14/2019
End Date: 11/2/2019

Job Description:
Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling. . Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance. Adapts machine or equipment design to factory and production conditions. Responsibilities include close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas. May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques. Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

*Basic Qualifications:
•Knowledge of engineering drawing interpretation and tolerances.
•Demonstrated organizational skills
•Proficient with Microsoft Office suite
•Producibility for manufacturing experience.
•Understanding of configuration control principles
•Experience in writing basic manufacturing planning work instructions
Desired skills :
•Experience with material handling, work flow, and process development of complex assemblies, mechanical details, tooling and mechanical system integration
•Dual discipline engineering experience: mechanical and electrical backgrounds
•Lean six sigma training, i.e. green belt, or black belt certified
•Tool fabrication and assembly experience
•Experience with use of Teamcenter Engineering software package
•Bachelor’s degree from an accredited college in Mechanical, or Electrical Engineering, or equivalent experience/combined education

Level: Level 1: BS+0-2 YRS
Pay Rate: $15.00 - $50.00 Hourly
 
Job Number: JE-1548-1S
Job Location: Lexington, KY
Rate: 50/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Master Planner - no clearance TX

Description:
166820 Job Title: Master Planner

Work Site Address: Fort Worth, TX 76108
Job Number: 2559-1
Max Pay Rate: $75.00/hr
Start Date: 11/12/2019
End Date: 12/18/2020
Position Type: Contract


Job Summary:
This position provides Planning/Scheduling support to meet multiple immediate requirements across Aeronautics Line of Business.

Responsibilities include the development and maintenance of components of the Program Integrated Master Schedule, including proposal schedule development, review/support Statement of Work and Basis of Estimate development. The ideal candidate will drive communication and integration across a variety of program functional organizations such as Engineering, Procurement, Contracts, Business Management, Program Management and Manufacturing. Candidate will need knowledge of Critical Path Methodology and be able to apply it in schedule network development and analysis. This candidate will be able to perform complex schedule analysis and develop recommended courses of action to be delivered to internal and external customers. Demonstrate strong communication and interpersonal skills to work in a team environment. Possess ability to prepare status reports, metrics and make presentations as required. Must be outgoing, energetic, self-starter, flexible and demonstrate Program Planning and Scheduling hands on experience. Additional responsibilities will be assigned as required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Aerospace/Aviation, Program Master Planning/Scheduling Experience (This is not a Maintenance Scheduler position).
Candidate must be flexible to work on a variety of assignments and be able to work with other planners/schedulers and internal customer in a fast pace and changing environment.

Desired Skills: Microsoft Project and/or Open Plan Experience, Milestones Professional Experience, Proven Planning and Scheduling Expertise, Demonstrated Earned value Management System (EVMS) Experience, Proposal Development Experience.

Skills: Category Name Required Importance Experience
Soft Skills Ability to meet deadlines No 9 6 + Years
Soft Skills Analytical Ability No 9 6 + Years
Software Skills MS Excel Advanced No 1 6 + Years
Technical Skills Earned Value Analysis No 1 6 + Years

Qty 2 position
 
Job Number: JE-2559-1
Job Location: Fort Worth, TX
Rate: 75/hr max
Duration: 13 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Process Systems)

Description:
Key Duties:

  • Develop concepts for new piping systems and provide flow, flexibility, thermal, structural, or any other required analysis to support the proposed design.

  • Evaluate the analysis results for suitability relative to applicable codes and standards.

  • Provide engineering support to the appropriate craft workforce to facilitate maintenance and repair of existing systems.

  • Evaluate existing hardware for safety, security and potential for improvement.

  • Serve as the design point of contact or lead designer on larger, more complex projects.

  • Work with the project managers and project engineers to ensure that design input into cost, schedule, and other project-level decisions is accurate and complete.

  • Provide guidance to and check the work of less experienced engineers.

  • Work with the design team (drafters, checkers, etc.) to produce complete design packages, including detailed drawings, analysis reports, and equipment specifications, and be capable of communicating the details of these design packages to the remaining project team (system engineers, test engineers, project managers, craft supervisors, etc.)

  • Provide engineering guidance to support the procurement of pumps, valves, heat exchangers, pressure vessels, or other hardware necessary for the fabrication and installation of the proposed design.

  • Coordinate with the appropriate system engineer, craft supervisor, and/or work planner to ensure that hardware is fabricated and installed in accordance with the approved design package.

  • It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy.

  • Perform other related duties as required.


 

Required Skills, Experience, and Education:



  • Must have an Active Secret government clearance.

  • 5 or more years of experience in the design and analysis of process systems.

  • Technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems.

  • Experience with the design of complete piping systems including pumps, valves, heat exchangers, pressure vessels, and other related equipment.

  • Experience performing flow and flexibility analysis of complete piping systems.

  • Experience developing equipment specifications.

  • Experience reading, interpreting, and creating detailed fabrication and installation drawings.

  • Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

  • Ability to closely coordinate with manufacturing to ensure economic designs.

  • Basic skill in verbal and written communication.

  • Bachelor's degree in Chemical or Mechanical Engineering.


 

Desired Skills, Experience, and Education:



  • Experience with interactions with fabrication and machine shops.

  • Familiarity with turbine and rocket test cells, wind tunnels, space chambers, and/or arc heater facilities; or other industry product test facilities is desirable.

  • Familiarity with Caesar II software package.

  • Familiarity with Applied Flow Technology (AFT) Arrow, Fathom and Impulse software packages.

  • Familiarity with Autodesk Inventor and AutoCAD software packages.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-46114
Job Location: Tullahoma, TN
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-11-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (Machine Design)

Description:
Key Duties:

  • Develop concepts for new hardware and provide thermal, structural, flow, or any other required analysis to support the proposed design.

  • Evaluate the analysis results for suitability relative to applicable codes and standards.

  • Designing one-of-a-kind of mechanisms, wind tunnel models, and test fixtures including associated stress analysis.

  • Provide engineering support to the appropriate craft workforce to facilitate maintenance and repair of existing systems.

  • Evaluate existing hardware for safety, security and potential for improvement.

  • Work with the design team (drafters, checkers, etc.) to produce complete design packages, including detailed drawings, analysis reports, and equipment specifications, and be capable of communicating the details of these design packages to the remaining project team (system engineers, test engineers, project managers, craft supervisors, etc.)

  • Coordinate with the appropriate system engineer, craft supervisor, and/or work planner to ensure that hardware is fabricated and installed in accordance with the approved design package.

  • It is a condition of employment to wear company issued PPE (Personal Protective Equipment) in accordance with supervisory direction and company policy.

  • Perform other related duties as required.


 

Required Skills, Experience, and Education:



  • Must have an Active Secret government clearance.

  • 10 or more years of experience in the design and analysis of process systems.

  • Technical knowledge of engineering systems, engineering calculations, applications of engineering methods and construction methods and materials, and application of computer aided engineering (CAE)/computer aided design (CAD) tools to engineering problems.

  • Experience with the design of complete piping systems including pumps, valves, heat exchangers, pressure vessels, and other related equipment.

  • Experience performing flow and flexibility analysis of complete piping systems.

  • Experience developing equipment specifications.

  • Experience reading, interpreting, and creating detailed fabrication and installation drawings.

  • Participates in and fosters a work environment that is based upon openness, trust, communication, teamwork, empowerment, innovation, and satisfaction.

  • Ability to closely coordinate with manufacturing to ensure economic and feasible designs.

  • Basic skill in verbal and written communication.

  • Bachelor's degree in Mechanical Engineering.


 

Desired Skills and Experience:



  • 15 or more years of experience designing machines, mechanisms, stress analysis, etc.

  • Experience with interactions with fabrication and machine shops.

  • Working understanding of Geometric Dimensioning and Tolerance (GD&T).

  • Familiarity with wind tunnel model design and fabrication.

  • Familiarity with turbine and rocket test cells, wind tunnels, space chambers, and/or arc heater facilities; or other industry product test facilities is desirable.

  • Experience with injection mechanisms.

  • Experience with positioning and control systems.

  • Experience with prototyping and checkouts.

  • Experience with ANSYS FEA software package.

  • Experience with AUTODESK INVENTOR CAD software.


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-46109
Job Location: Tullahoma, TN
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-05-29 00:00:00.0
Start Date: 2019-11-07 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Chris Chacon
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
11 months W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11812
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 11 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Manufacturing Engineer

Description:
Mechanical Manufacturing Engineer

Windsor Locks, CT
$36.50/hr
1 year W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
This position will be responsible for determining mechanical manufacturing methods for (SLS) hardware and ensuring that the processes are available. Candidate will create manufacturing assembly documentation, concepts tools, provides technical assistance, in order to assemble high quality, high engineered hardware for us in space applications. Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements. Must be able to perform cost estimates, work to schedules, and write procedures and policies. Must be able to review drawings and concepts and resolve producibility concerns. Candidate must provide technical support to the manufacturing facility as well as to the external suppliers. Will support failure investigations, determine root cause of failure, and implement corrective actions and disposition of non-conforming hardware, all in support of continuous improvement initiatives. Must be able work well in an integrated product development/ design environment. Candidate will present to senior management on various topics, be involved with, and implement additional initiatives such as ACE, Process Certification, Manufacturing Process Reviews, Lean Manufacturing and EH&S projects. Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
The job involves working on the manufacture of complex mechanical systems, manufacturing of components such as, heat exchangers, pumps, fans, accumulators and other hardware related with life support systems.

Education / Certifications
* Bachelors of Science in Engineering or Technology, MBA or an advanced Engineering degree is desired.

Experience/Qualifications
* Candidate must have 5-7+ years of experience working on the manufacture of complex mechanical systems. Desired experience should include working on the manufacturing of components such as, heat exchangers, pumps, fans, & accumulators.
* Candidate must have working knowledge of Microsoft Windows environment and experience in using any type of publishing software. Familiarity with a modeling and/or design package such as ProE, Creo, or CAD is desired. Knowledge of Lean Manufacturing, machining concepts and special processing, such as welding and brazing, is desirable. Strong knowledge of Continuous improvement methods (ACE or the DMAIC model) and demonstrated use of their tools is desirable. Experience with a MRP (Manufacturing Resource Planning) system is desirable.
* US Citizen is required
 
Job Number: 11811
Job Location: Windsor Locks, CT
Rate: 36.50
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company LLC is an AA/EOE.
 
Job Number: 507
Job Location: Mojave, CA
Rate: $60-$85/Hr. **DOE**
Per Diem: Yes
Overtime: Possible
Duration: Long Term
Start Date: ASAP
Input Date: 06/14/2022
Last Updated: 07/22/2022
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mission Safety Engineer MIL-STD 882

Description:
*This is a full time, 10 month contract, located in Grande Prairie, TX*



We are hiring for a contract early career Safety Engineer who will ensure products sold to customers are safe for use. The responsibilities will be to conduct preliminary, system hazard, subsystem, operating and functional Hazard and Fault Tree Analysis per MIL-STD-882.



Daily work may include developing system safety for environmental compliance, prohibited materials, hazardous materials management, pollution prevention, risk assessment, hazard tracking database Flow downs to suppliers, audits, recommend safety features and controls for system design, software, training and procedures to mitigate or eliminate hazards.



Required
*2-3 years’ experience in Manufacturing Safety in an aerospace or defense subcontracting capacity; experience with MIL-STD 882.

*Active Secret Clearance; US Citizens only please
*Experience conducting System Safety designing, audits, testing and verification.
*Candidate must be willing to work overtime and travel as needed.

*Engineering Degree



Pluses:

*Vehicle or weapons familiarity.
*Experience implementing a software safety program in accordance with AR 385-17 or equivalent.
*Ability to manage subcontractors in Safety field of expertise.

*Experience in preparing software system safety documentation and presenting safety case to the SSSTRP or equivalent safety boards
*Knowledge of Human Factors, or Reliability and Maintainability engineering; Hazmat knowledge
*Experience supporting Government conducted tests and providing Safety analysis of test incidents.
 
Job Number: 117
Job Location: Grande Prairie, TX
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PCB Design Engineer Mentor Graphics

Description:
*This is a full time, 6 month contract position, located in Orlando*



We are seeking a PCB design engineer who will be responsible for designing/debugging, laying out and fabrication of high density, multi layer (8-30+ layers) digital and analog circuits/boards using Mentor Graphics software.



Candidates will be working daily with controlled impedance, terminators, diff pairs, stripline, dual stripline, DDR3, DDR4 and shielded traces on double-sided boards up to 36 layers and 5 gbps. HDI, fine pitch BGA’s, micro, blind and buried vias.



Required
*PCB Electrical Engineer with 6 years’ experience designing, debugging, and laying out digital/analog circuits.
*Skilled in Mentor Graphics Xpedition and Designer V2.3 as well as Valor.
*Single and Double sided assembly with PCIe, GIGe using micro Blind/Buried and Micro via experience
*Experience with controlled impedance, terminators, diff pairs, stripline, dual stripline, DDR3, DDR4 and shielded traces on double-sided boards (up to 36 layers and 5 gbps), . HDI, and fine pitch BGA’s,
*Familiar with IPC and MIL-STD and specifications
*Able to obtain a security clearance after start; requires applicants to be US Citizens.
*4 year engineering degree



Preferred:
*HyperLynx DRC, DxDatabook and Library Manager experience.
*Experience with Mentor Graphics Board Station, DaLMS and Fablink
 
Job Number: 448
Job Location: Orlando, FL
Rate: $70.00
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer System Architect 3 CA

Description:
Principal Engr Sys Architect 3 (Job Number: 19026177)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Nov 25, 2019

Target End Date: Nov 20, 2020

Pay rate: $55.00 - $60.00
Location: San Diego
Schedule: 9/80
Duration of assignment: Up to 1 year

Develops computer systems specifications that address business requirements and that fit with the company's system architecture standards. Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities. Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.

Develops and maintains software configuration management tools to support configuration identification, control, reporting, and delivery of internally developed software products. Performs configuration management and release engineering tasks to ensure new software product operating parameters are documented, comply with standard hardware configurations, and are logistically sustainable. Designs, develops, automates, and maintains productivity tools using programming, database or scripting languages to improve software modeling and development. Designs and implements build procedures that are used to support software product development and use. May develop software configuration standards for program-wide use. May train software developers in the use of configuration management tools and the implementation of software quality standards.


Basic Qualifications:

•Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 9 years of engineering experience
•Must have experience with at least one of the following Configuration Mgmt Tools: CMS (VMS), ClearCase, ClearQuest, Visual SourceSafe or TCent

Preferred Qualifications:

•Master’s Degree in a Technical Field
•Atlassian Tool Suite (JIRA, GIT/Subversion)
•TeamCity
•Wind River Workbench 3.0
•Tornado 2.2
•MKS
•Visual Studio 2008
•Visual Studio 2010
•Visual Studio 2013
•Cygwin
 
Job Number: JK-1800ATO
Job Location: San Diego, CA
Rate: 55-60/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal FPGA Design Engineer_CLEARANCE

Description:
Roles and Responsibilities

• Perform FPGA design, simulation, and documentation using product families such as Xilinx Kintex7, Virtex7, Zynq, Ultrascale, RFSoc and Altera Stratix.
• Conduct testing of products using high-speed oscilloscopes, signal generators, signal analyzers, Matlab, and FPGA debugging tools.
• Define and develop specifications and test procedures.
• Can review and critique designs created by peers and/or junior engineers.
• Is proficient at recognizing the unique design requirements such as safety and reliability architectures associated with military applications.
• Compiles and analyzes test data to determine design effects on electrical circuits for military applications.
• Define development test plans and methods to ensure a robust design is achieved.
• Strong analytical skills and the ability organize/prioritize job assignments and tasks.


Qualifications and Education Requirements

TOP SKILLS: FPGA Design experience, Subject matter expert in coding VHDL/Verilog, preferably experience with Xilinx FPGAs and respective firmware tools. Proficient in digital verification, validation, and debug. Digital logic design experience.

• Bachelor’s Degree in EE or Computer Engineering and 9 years of relevant experience or a Master’s Degree with 7 years of relevant experience.
• Experience in FPGA design and development using VHDL or Verilog.
• Experience with Simulation tools.
• Experience with setting and managing design constraints to meet critical timing requirements.
• Experience with FPGA design verification using hardware verification and debugging tools.
• Experience in the use of lab equipment such as oscilloscopes and logic analyzers.
• Experience in creating and managing technical documentation such as architecture and interface control documents.
• Experience in Hardware/Software integration.
• Experience in lead engineering role.
• Possess strong interpersonal skills to work effectively within a development team to understand system level interdependencies that impact circuit requirements and design constraints

Preferred Skills
• Experience in bus protocols such as I2C, SPI, RS-232, JESD204B.
• VHDL.
• Digital implementations of low pass, bandpass, and high pass filters.
• Digital implementations of comb filter and Hilbert transform filter.
• Experience with Intel Arria 10/Max 10.
• Experience with Modelsim, Xilinx Vivado, Synplicity, MATLAB, Quartus, Simulink.
• FPGA Digital Signal Processing implementation.
• Experience with bus functional models.
• Is familiar with unique test requirements associated with military electronics such as extreme temperature testing.
• Preferably an Understanding of Six Sigma disciplines, design for assembly / design for manufacturing (DFA/DFM).
 
Job Number: KMNG - 9664769
Job Location: Plymouth, MN
Rate: OPEN
Per Diem: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Kristine
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal System Safety Engineer - Clearance

Description:
Key responsibilities include:

Performing fundamental aerospace safety tasking, including generation of fault trees, functional hazard analysis, Failure Modes and Effects Analysis, Failure Mode, Effects and Criticality Analysis, software system safety analysis, sneak circuit analysis, bent pin analysis, and system/subsystem hazard analysis
Interpreting system requirements, customer specifications, and military standards to develop appropriate safety requirements for hazard mitigation or elimination
Generating and updating required System Safety documents such as SSPP, RHA, SCA, FTA, BPA, SSHA, SARs • Applying environmental, military, federal, national, and industry regulatory safety standards and codes such as NIOSH, OSHA, NFPA, DOE, UBC, CFR, ASTM, ANSI, RCC, AFOSH, PESHE, MIL-STD-882, and AFSPCMAN 91-710
Applying engineering principles to assess design compliance of a complex aerospace system and synthesize rationale and justification for Safety waiver requests and hardware non-compliances
Identifying technical issues, proposing solution options, and following through to resolve the issues with minor supervision
Interfacing with internal and external customers and associates in engineering and program management • Generating and presenting status charts at program and customer meetings.
Requirements:

Bachelor of Science degree in Electrical Engineering or similar Engineering degree.
Minimum 7 years of related experience.
High level understanding of tactical missile subsystems.
Proficient with MS Office suite of products.
Strong interpersonal skills and an ability to build effective working relationships are a must.
Excellent attention to detail.
Excellent oral and written communication skills and technical writing experience.
Ability to communicate findings to varied audiences to gain support or resolve concerns.
Self-starter capable of performing and prioritizing assigned tasks with very little direction.
Familiarity with requirements development and risk management.
 
Job Number: KM - SIGN - 9436479
Job Location: Northridge, CA
Rate: $80-105/hr DOE
Per Diem: No
Duration: 6 months (possible CTH)
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Kristine
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Technical Editor and Writer - Clearance CA

Description:
Principal Technical Editor and Writer (Job Number: 19028955)
Number of Openings: 1
Location(s): United States-California-San Diego

Shift: 1st Shift

Target Start Date: Nov 4, 2019
Target End Date: Jul 3, 2020
Pay rate: $40.00 - $45.00
Number of openings: 1
Location: Rancho Bernardo
Work schedule: 9/80

The selected candidate will develop and implement software integration plans in a lab environment supporting various space, aircraft, and ground systems.


Essential Functions:

•Write, rewrite, and/or edit documents such as operational procedure manuals and related technical publications
•Communicate clearly and effectively, operational specifications and instructions to aircrew audiences to include military personnel
•Act as a resourceful point of contact to Engineering and the Test teams
•Support the development of teams in the investigation of issues
•Develop, implement, and support the Technical Order (TO) development and build plans
•Demonstrate initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals
•Requires active participation in overseeing the preparation of illustrative materials, including the selection of drawings, sketches, diagrams and charts

Candidate must be comfortable in a lab environment and be able to collaborate closely with system engineers, hardware designers, and integration/test engineers.


Basic Qualifications:

6 Years with Bachelors, 4 Years with Masters, or equivalent experience. Previous Flight Manual authoring and development experience. Familiar with pilot and/or mission operator controls, displays, and general knowledge of aircraft systems. Previous experience developing Interactive Electronic Technical Manuals (IETMs). Strong attention to detail and personal organization.

Preferred Qualifications:

Previous Military and/or Pilot experience preferred in unmanned or manned aircraft. Familiar with pilot and sensor operator controls, displays, and general knowledge of all aircraft systems. Ability to support airworthiness military type certification. General understanding of S1000D, SGML or XML authoring software, common source database, and technical publications development processes. Ability to interpret engineering documentation including drawings, specifications, alert bulletins and other technical documents. Possess excellent oral and written communications skills. Must be able to perform work with little or minimal supervision. High literacy in structured authoring environment (bookplan structure, task numbering and DTDs/schema, elements, tagging and attributes). Experience producing electronic technical data.
 
Job Number: JK-1807ATO
Job Location: San Diego, CA
Rate: 40-45/hr
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Printed Wire Board Designer

Description:
We have an outstanding Contract to Hire position for a Printed Wire Board Designer to join a leading American technology located in Cincinnati, OH.

The PWB Designer performs complex and difficult design tasks requiring the operation and application of Computer-Aided Design equipment and associated peripheral equipment. Requires extensive skill and knowledge of equipment capabilities, application techniques and design limitations. Maintains technical coordination with engineering and design staff members. Work assignments are typified by their complexity and non-routine nature where established techniques and procedures may not exist. Provides work leadership to lower level CAD users and reviews work for quality and accuracy.

Major Responsibilities:
Prepare and direct preparation of design studies. Oversee multiple projects and maintain status records on all assigned projects and in full accordance with IPC and AS9100 quality standards and requirements.
Examine engineering drawings and related documents for soundness, efficiency, completeness, clarity and dimensional accuracy; conforms to design/drafting standards, design. Actively participates in the transition of design from concept to production floor.
Perform tolerance analysis as required. Implements approved changes.
Function as checker for all documents prepared by support personnel.
Makes accurate scale layouts of parts, assemblies, or electronic circuits for electronic units of considerable complexity, showing specification tolerances, dimensions and material to be used.
Checks with design engineers or other sources such as parts catalogs to find additional data.
Performs CAD Designs using the following tools: Mechanical/Gage/Tool Designers - Solid Edge ST6 , SOLID WORKS as required.
PWB Designs – Altium, Mentor Pads 2007, DX Designer, PCB to 3D, CAM 350 others as required
Prepares detailed drawings, and complete mechanical or electrical drawings of printed circuit (PC) board components and assemblies from notes, verbal instructions, and rough or detailed sketches for engineering or manufacturing purposes.
All other tasks as assigned by manager.
Basic Hiring Criteria:
Associates degree in Engineering with 5+ years of on the job PWB design experience, or 10+ years of on the job PWB design experience.

Desired Qualifications:
ANSI Y14.5-82M dimensioning and tolerancing.
PWB designers are required to have IPC CID certification or have the ability and desire to obtain one. Equivalent certifications considered.
Working knowledge of IPC standards related to electrical symbology. IPC Class III literate.
Working knowledge of materials and processes specific to the PWB industry.
Experience with Rigid, Flex, and Rigid-Flex design requirements.
ECAD tool experience (Altium and how to interface with MCAD & ECAD DFM tools).
Project Management
Working knowledge of algebra, geometry, and machining technology.
Proficiency in 2D and 3D CAE/CAD/CAM software tools.
Proficiency in Microsoft Office products
Working knowledge of MRP/ERP systems and data management applications.
 
Job Number: 39187
Job Location: Cincinnati, OH
Rate: $36 - 50 DOE
Overtime: Every other Friday off
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Sean Mulshine
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician VA

Description:
166567 Job Title: Production Test Technician

Work Site Address: Manassas, VA 20110
Job Number: 2346-1
Max Pay Rate: $30.00/hr
Start Date: 10/28/2019
End Date: 10/30/2020
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Roles and Responsibilities
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches. Corrects malfunctions by making adjustments or replacing parts or components as directed. Uses hand and small power tools, and various measuring and testing devices in performing job duties. Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment. Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications. May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
Typical Minimums
Associate degree in electronics or equivalent experience/combined education, with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 1 Year of experience.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Testing No 1
Soft Skills Communication Skills No 1
Soft Skills Multi-tasking No 1
Soft Skills Troubleshooting No 1
Software Skills Linux No 2
Software Skills MS Office No 1 1 - 2 Years
Software Skills MS Office - Intermediate Level No 3 < 1 Year Software Skills MS Windows No 1 2 - 4 Years Technical Skills Blueprint Reading No 1 Technical Skills Cisco No 2 Technical Skills Electrical Testing No 1 Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No 1 Technical Skills Tester No 1 Technical Skills User Acceptance Testing No 3 Qty 1 position
 
Job Number: LMRMS-2346-1ATO
Job Location: Manassas, VA
Rate: 30/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Test Program Set (TPS) Design Engineer (Secret Clearance)

Description:
Required Skills/Attributes or Domain Knowledge:
•Mix of hardware RF/Digital and software skills (C/C++)
•Background and working knowledge in RF theory and concepts
•Test design and integration background
•Candidate must be hands on person and have personal experience with test.

Electrical Engineering or Computer Engineering Degree and 5+ years of industry experience. Will accept candidates with more experience (8+ years) to fill at a higher level
 
Job Number: 1910107903
Job Location: Linthicum, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Real Time Software Engineer(Active Secret Clearance)

Description:
Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system.
Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Provides technical leadership for software projects and leads software supplier management activities. Leads development, selection, tailoring and deployment of processes, tools and metrics. Plans, executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
• Aircraft and Avionics systems Domain knowledge
• Real-time Embedded Software Development
• Experienced with C++, ADA, and other programming languages
• GreenHills, ADACore, VxWorks, Visual Studio development environment
• Knowledge of one at least few of these tools: DOORS, Clearcase, ClearQuest, Git, VersionOne, JIRA
 
Job Number: RTSE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Recruiter - Clearance MD

Description:
Job Title: Recruiter

Work Site Address: Hanover, MD 21076
Job Number: 2812-1
Max Pay Rate: $34/hr
Start Date: 12/16/2019
End Date: 12/16/2020
Position Type: Contract

Job Summary:
Manage full-cycle recruiting process for technical, systems & software engineering and cleared positions, ensuring a smooth and positive candidate experience.

• Lead the efforts to develop, implement, and execute hiring strategies for client groups across RMS.
• Strategize with TA Managers, HR Business Partners and Recruiters in order to stay apprised of current business dynamics within your customer groups. This is especially important with supporting remote sites’ recruiting needs.
• Partner effectively with HR teammates when working compensation, compliance, onboarding, and other processes.
• Source and recruit top tier talent, not only to meet the hiring goals of immediate needs, but also proactively, in order to build candidate pipeline for upcoming and future growth demands.
• Perform other duties as assigned.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Must have experience with recruiting TS/SCI and above.

Qty 3 positions
Candidates MUST have experience recruiting
Candidate must be able to work from office in Hanover, MD Mon - Thurs of each week.
 
Job Number: LMRMS-2812-1TS
Job Location: Hanover, MD
Rate: 34/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal Mechanical Engineer (Microelectronics Packaging Design)

Description:
• Bachelor’s degree in an engineering or science discipline
• Nine (9+) years of experience
• Experience with Autocad (2D) and NX (or other 3D modeling software)
• Familiar with Printed Wiring Board (PWB) design and fabrication
• Understanding of packaging of organic and ceramic high-density modules
 
Job Number: 1910108766
Job Location: Baltimore, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Principal RF Test Design Engineer (Secret Clearance)

Description:
Bachelor’s degree in a technical area with 5 years of experience Designing Fixtures and Automating Lab Instruments

Basic Qualifications (Must Meet All):
• C/C++ Software Programming proficiency
• Electro-Mechanical Test Fixture Design
• Familiarity with Lab Test Instruments (scopes, SpecAns, Network Analyzers)
 
Job Number: 1910108844
Job Location: Baltimore, MD
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer

Description:
Morson international is currently recruiting for a Software Developer for a global organization specializing in biometric identity solutions. This Software Developer will work with the R&D team located in Pasadena, working closely with colleagues and customers throughout the full software development life cycle, you will analyze requirements, design software components, develop software product and implement integrated software and systems solutions. You must be technically skilled, well organized, detail oriented, and fully devoted to the
Company biometric identification products for fingerprint search, facial recognition, and iris match that secure the digital lives of millions of people.

Education:
Bachelor’s degree in computer science; Computer Engineering; Computer Software Engineering; Computer and Information Sciences or other Science, Technology, Engineering, and Mathematics disciplines is highly desired.
Biometric identification industry experience or knowledge is a plus.
Culture fit - Team of 14 Developers - Please verify your candidate is not currently working for the client.

Duties:
As a software developer for the biometric identity solution R&D team located in Pasadena, working closely with colleagues and customers throughout the full software development life cycle, you will analyze requirements, design software components, develop software product and implement integrated software and systems solutions. You must be technically skilled, well organized, detail oriented, and fully devoted to the
Company biometric identification products for fingerprint search, facial recognition, and iris match that secure the digital lives of millions of people.
Work with software architect, software engineers, quality engineers, and other team members to design and build required software systems that meet customer requirements.- Requirement
Develop server applications for multiple platforms such as Windows, Linux, AIX, etc.- Requirement
Document the detailed design and write unit testing plan.- Required
Serve as a key member of new system development projects.
Understand and adhere to the design and coding procedures and standards.
Provide third-level support for operational issues.
Participate in agile software development with Scrum.- Requirement
Prepare training material for the solution’s administration and operation, provide these trainings to trainers or end-users.
Ensure a good level of maintainability and reusability of the software components developed.
Ensure compliancy of the produced software with international or national standards or other regulations.

Skills:
Minimum 5 year of work-related software development experience (including internships).
Experience in Java system design and development- Preferred familiar with Java development tools and frameworks such as Eclipse IDE, JPA, Spring framework, Message Queue programming.
SOA knowledge and web service development experience.
Relational DBMS related experience.
Have knowledge of C and/or C++ language; be able to understand large volumes of C/C++ source code.- Preferred
Client-server system integration experience or knowledge.
Familiar with network programming using TCP/IP, UDP, FTP, POP3/SMTP etc.
Familiar with various operating systems including but not limited to Microsoft Windows, Linux and other UNIX variants.
Must be fully autonomous in completing an assignment and in applying technologies.
Ability to multi-task and handle large workloads under time constraints (able to work under pressure).
Customer oriented and results oriented with strong process and execution skills.
 
Job Location: Pasadena, CA
Rate: $60/hour
Per Diem: No
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MORSON INTERNATIONAL
Attention: Philip Power
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 11/23/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer / .NET Applications Developer - Clearance / Temp to Perm NC

Description:
165319 Software Developer
Work Location: Fort Bragg, NC
Status: Open
Qty: 1
Desired Start Date: 12/9/2019
End Date: 6/9/2020

Job Description:
Maintain and enhance existing Logistics Warehouse Management Application. Participate in requirements analysis and collaborate with internal teams to produce software design and architecture. Write clean, scalable code using .NET programming languages. Test and deploy applications and systems. Revise, update, refactor and debug code. Improve existing software. Develop documentation throughout the Software Development Life Cycle (SDLC). Serve as an expert on applications and provide technical support to production support teams. At least 5 years as a .NET Developer or applications developer. BS/BA in Computer Science, Engineering or a related field. Proven experience as a .NET Developer or applications developer. Familiarity with the ASP.NET framework, SQL Server and design/architectural patterns (e.g. Model-View-Controller (MVC). Knowledge of at least one of the .NET languages (e.g. C#, Visual Basic .NET) and HTML5/CSS3. Familiarity with architecture styles/APIs (REST, RPC). Understanding of Agile methodologies. Excellent troubleshooting and communication skills. Attention to Detail. Mandatory Skills: Proven experience as a .NET Developer or applications developer. Familiarity with the ASP.NET framework, SQL Server and design/architectural patterns (e.g. Model-View-Controller (MVC)). Knowledge of at least one of the .NET languages (e.g. C#, Visual Basic .NET) and HTML5/CSS3. Familiarity with architecture styles/APIs (REST, RPC). Understanding of Agile methodologies. Excellent troubleshooting and communication skills. Attention to detail. At least 5 years as a .NET Developer or applications developer.


This is a temp to perm position.

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
 
Job Number: JE-1729-1S
Job Location: Fort Bragg, CA
Rate: 50/hr max
Duration: 6 months temp to perm
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer / C/C++ CA

Description:
Job ID# 26511
Title TEMP Software Developer, C/C++
Experience Level Entry-Level (0-2 years)

Pay Rate $41.71/DOE
City San Diego
State California
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365

Job Summary
Client is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Software Engineers write code for small embedded processors for various components of aircraft and ground station, as well as simulating various sensors and components within the aircraft. This position involves maintaining and adding trainer capabilities to our existing simulation systems, as well as working with new aircraft designs.

Come join a team of professional engineers working in a highly dynamic environment with an incredible variety of work. The successful candidate will be expected to become familiar with the system and become proficient in writing requirements documents, design documents, test documents, and implementing code to fulfill those requirements before moving on to support larger efforts within the group. Experience with C/C++ and embedded systems is a plus!

Essential Qualifications
Typically requires a bachelors degree in computer science, information systems or related discipline. May substitute equivalent experience in lieu of education.

Must have a basic understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply basic use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a limited internal audience. The ability to work both independently and on a team is essential. Able to work extended hours as required.

Additional Qualifications
Requires a bachelor’s degree in Computer Science, Computer Engineering, or related discipline.
Experience with C/C++ highly desired.

Must possess the ability to understand new concepts quickly and apply them accurately throughout an dynamic and fast-pace environment.

Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a limited internal audience. The ability to work both independently and on a team is essential.
 
Job Number: JE-26511ATO
Job Location: San Diego, CA
Rate: 41.71/hr DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Experience applying modern computer vision or RF signal processing to real sensor collections
Extensive programming experience with either Python or C++.
Background building systems with a major machine learning library such as scikit-learn or Spark
Background in applying deep learning to real problems and knowledge of a major framework such as mxnet or PyTorch
Understanding of sensors (e.g. LIDAR, SAR, EO/IR, etc.) and a background in sensor fusion
Background in high-performance computing (ideally CUDA) -- embedded HPC especially desired
Robot Operating System knowledge
Experience with Simultaneous Localization and Mapping (SLAM) algorithms
Demonstrated history of building prototypes.
Comfortable working in an Agile Scrum environment'
 
Job Number: 47785
Job Location: CO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Skills Required:
• Required skills:
o C/C++, UML or Rhapsody
• Desired skills:
o Python, Perforce, Git
o Orion experience
Job Duties:
• Support the development of avionics software-level requirements
• Develop Guidance Navigation and Control (GNC) embedded Flight Software Code to meet requirements
• Perform Testing as needed at the software level
• Support software requirements an
Experience Requirements:
• Familiar with Agile Framework and DevOps Concepts
• Software C++, Greenhill’s compiler, Java/Python
 
Job Number: 47764 D
Job Location: Denver, CO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Months
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Strong grasp of software & robotics architecture concepts (experience with multiple paradigms, familiar with common patterns, etc.) and a strong algorithms/data structures background.

Experience applying modern computer vision or RF signal processing to real sensor collections

Extensive programming experience with either Python or C++.

Background building systems with a major machine learning library such as scikit-learn or Spark.

Background in applying deep learning to real problems and knowledge of a major framework such as mxnet or PyTorch.

Understanding of sensors (e.g. LIDAR, SAR, EO/IR, etc.) and a background in sensor fusion.

Background in high-performance computing (ideally CUDA) -- embedded HPC especially desired.

Robot Operating System knowledge.

Experience with Simultaneous Localization and Mapping (SLAM) algorithms.

Demonstrated history of building prototypes.

Comfortable working in an Agile Scrum environment.

Ability to travel and to support demonstrations in the field.
 
Job Number: 47761
Job Location: CO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Skills Required:
• Required skills:
o C/C++, UML or Rhapsody
• Desired skills:
o Python, Perforce, Git
o Orion experience
Job Duties:
• Support the development of avionics software-level requirements
• Develop Guidance Navigation and Control (GNC) embedded Flight Software Code to meet requirements
• Perform Testing as needed at the software level
• Support software requirements an
Experience Requirements:
• Familiar with Agile Framework and DevOps Concepts
• Software C++, Greenhill’s compiler, Java/Python
 
Job Number: 47764 D
Job Location: Denver, CO
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 Months
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Fort Worth, TX
$69/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Real-Time Simulation Software Engineer working on the F-35 Shared Simulation Software team. You will be part of the highly innovative Labs & Technical Services (L&TS) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within L&TS resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software.

* Bachelor's degree in an Engineering/Technical Field
* Experience with Real-time simulation software development
* Experience with Aircraft Avionics Sensors - EO/IR (Electro-Optical/Infrared)
* Experience with C++ programming

Skill Matrix: (not required)
Software design and development
C++ - Advanced Level
C++ - Intermediate Level
Modeling
Real Time
Simulation
Software design principles
 
Job Number: 11834
Job Location: Fort Worth, TX
Rate: 69.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Fort Worth, TX
$65/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Real-Time Simulation Software Engineer working on the F-35 Shared Simulation Software team. You will be part of the highly innovative Labs & Technical Services (L&TS) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within L&TS resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software.
* Experience in one or more areas related to simulation software, e.g. real-time executives, modeling and simulation, visual systems, data management, analysis systems, etc.
* Experience with C++ programming language
* Experience with Object-Oriented Analysis (OOA) / Object-Oriented Design (OOD) techniques
* Bachelor's degree in an Engineering/Technical Field
* Experience with software in a highly integration-intensive environment
* Experience with Aircraft Avionics Sensors - Electronic Warefare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperature System (DAS), Electro-Optical Targeting System (EOTS)
* Strong data analytics experience
* Experience with Agile software development methodologies and tools, such as VersionOne
* Experience with Linux operating systems

Skill Matrix:
Software design and development
C++ - Advanced Level
C++ - Intermediate Level
Modeling
Real Time
Simulation
Software design principles
 
Job Number: 11826
Job Location: Fort Worth, TX
Rate: 65.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Marietta, GA
$72/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Will become a technical staff member for laboratory software development and run-time simulation computing environments for the LM Aero Simulation and Systems Integration Laboratories (SimSIL). This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-22, F-35, C-5, C-130J Aircraft. As part of the Simulation and System Integration Labs (SimSIL) organization, the candidate will provide computer and network support for Windows, Linux and Solaris Operating Systems, and be able to assist other developers, modelers and integrators working on these systems and run-time systems.
Security+ CE Certification
Experience with software development.
Experience with Windows, Linux and Solaris operating systems.
Experience configuring computer systems and software.
Bachelor's degree in an Engineering/Technical field.

Skill Matrix: (none required)
Information Security
Local/Wide Area Networks
Mainframe Servers
Solaris
Intel Hardware/Servers Install
IT Security Administration
Unix Administrator
 
Job Number: 11825
Job Location: Marietta, GA
Rate: 72.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Marietta, GA
$66/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
The Software Engineer will be a technical staff member for laboratory software development within the LM Aero Labs and Technical Services (L&TS) Simulation Team. This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft. Software will be developed for Linux, Windows, or Solaris platforms. Selected candidate may operate and maintain existing laboratory venues. Assignments may change over time as required by the organization. Initial assignment will likely involve development, integration, documentation, test and debugging of airframe, aircraft system and avionics software models that contain logical and mathematical solutions for experimental, developmental and production aircraft in computer languages for solutions by means of data processing. Must be able to apply the appropriate standards, processes, procedures and tools throughout the development life cycle, locate and correct programing errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities.


Bachelor of Science in an Engineering discipline or another technically related discipline from an accredited university.
-Experience in the use of Windows and Unix Operating Systems.
-4+ years experience of software development in high order languages (C++, Java and/or Ada).
-Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
 
Job Number: 11787
Job Location: Marietta, GA
Rate: 66.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Fort Worth, TX
$65/hr
6 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*

JOB DESCRIPTION:
This individual will perform a preliminary technical analysis role as a software discloser or software license assessor, executing analysis and preliminary assessments of open source and other third party software using established tools and processes. In doing so, the successful candidate will determine what types of licensing, copyrights, and other attributions are contained within the software package and make initial recommendations to the assessor regarding overall suitability for use within the company with respect to intellectual property (IP). Recommendations concerning suitability and risk potential will be developed under the guidance of the team lead and other members. This individual will be expected to work closely with the others in the team to learn the processes and tools and may be called upon to perform business analysis tasks with the customer to understand their requirements. Additional opportunities exist for developing and modifying software tools used in performing daily tasks.

REQUIRED SKILLS:
- 5-10 years experience in development of software
- Must be a US Citizen
- Requires a degree in Computer Science or Software Engineering

Ideal candidate has software development, specifically with build experience. Experience with C++/C#/JAVA , (No scripting languages like Python or JavaScript). Experience with Agile development of Open Source Software, either creation of new software or modification/combination of existing, with an understanding of how FOSS software is constructed.

-Software Development Experience - 6 years required
 
Job Number: 11757
Job Location: Fort Worth, TX
Rate: 65.00
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer Level 3

Location: Fort Worth, TX
Rate: $57.48/HR
Duration: 1+ year contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****An Active Secret Clearance is required****


This position is with the Advanced Development Programs Software Systems group in Fort Worth, Texas. This position requires a software engineer to use a wide application of technical principles, theories, and concepts in the software field to develop, integrate, and test software products for Advanced Development Programs.

1. Candidate responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test.
2. These responsibilities may also span the avionics services, to include ground station development as well as mission systems software technologies.
3. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.
4. The successful candidate will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
5. The successful candidate must have demonstrated effective pro-active communication skills as the position will require frequent inter-organizational and outside customer interactions.
6. The ability to travel on occasion for team interaction and integration and test activities is required.
7. Experience with Java/C++ coding languages, object oriented architectures, and object oriented design is required.
8. Experience with Data Links and Comms, modular Open Mission Systems architectures, integrated development environment including debugger tools, networking, RTOS and PC development, embedded systems integration, requirements generation, and systems interface development is highly desired.
9. In addition, recent work experience with embedded architectures, single board computers, hardware and software in the loop implementation and testing, and F-35 Mission Systems Software is a plus.
10. The successful candidate will need to pass a security screening before interview.

Basic Qualifications
STEM Degree
Level 3: BS+6-10 YRS or MS+4-8 YRS
Experience C++ and Java.
Knowledge of intelligence, surveillance, and reconnaissance (ISR) systems.
Ability to travel 25% of time.

Desired Skills
Modular Open Mission Systems Development
Agile Software Development
Agile Process Tools (e.g. Version One, JIRA)
Requirements generation and system interface development
UML design documentation
XML technologies for configuration and run-time messaging, including schema (XSD) and transforms (XSLT)
Object Oriented (OO) Design
Real Time Operating System and PC development (Greenhills, Wind River, Red Hat)
Linux Operating System
Configuration Management Systems (e.g. ClearCase)
OpenGL
Mil-Std-1553
Embedded software and systems design and integration

***Must be a US Citizen. This position is located at a facility that requires special access and a Secret clearance to start.***
 
Job Number: 11643
Job Location: Fort Worth, TX
Rate: $57.48
Per Diem: Yes
Overtime: Possible
Duration: 1 Year
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance CA

Description:
166454 Job Title: Software Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2150-1
Max Pay Rate: $120.00/hr
Start Date: 10/14/2019
End Date: 1/14/2021
Position Type: Contract

Job Summary:
Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test.

Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations. Perform other duties as assigned.

Qualifications and Education Requirements
BS+11 YRS or MS+9 YRS
STEM Degree
Experience with 1 of the following C, C++, Java, Team Dev. Experience
Desired Skills
Windows or Linux application or server-side development
Development of real-time systems or use of real-time operating systems (RTOS)
Developing SW for air vehicle systems
Service Oriented Architecture development or Distributed Programming
Hardware/Software Integration
Model-based software development
C#, Python, and/or PERL
Ability to build and maintain relationships, collaborate with others, engage in constructive conflict, and manage interpersonal dynamics
Strong decision making and judgment
Oral and written communication skills
Financial and business acumen
Demonstrated experience and ability to deliver results
Experience using standard office software tools
Ability to travel

Skills: Category Name Required Importance Experience
Software Skills C++ - Expert Level No 1 6 + Years
Software Skills Java No 1 4 - 6 Years

Qty 1 position
 
Job Number: JE-2150-1TS6
Job Location: Palmdale, CA
Rate: 120/hr DOE
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance CA

Description:
166851 Job Title: Software Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2628-1
Max Pay Rate: $120.00/hr
Desired Start Date: 12/17/2019
End Date: 2/19/2021
Position Type: Contract

Job Summary:
Software engineer with experience in building real-time, embedded avionics/vehicle management systems. The ideal candidate should be proficient with developing safety-critical components using C and/or C++ in a Real-Time Operating System (RTOS), writing automated unit tests, and have experience integrating software components in a System Integration Lab (SIL).

Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test.

Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations. Perform other duties as assigned.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
Skill Sets:
C++
Java
Real Time Operating Systems
Linux
Windows
HW/SW Integration

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1 2 - 4 Years
Software Skills Java No 1 2 - 4 Years


Qty 2 position
 
Job Number: JE-2628-1S6
Job Location: Palmdale, CA
Rate: 120/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance CA

Description:
166423 Job Title: Software Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2152-1
Max Pay Rate: $98.52/hr
Start Date: 10/14/2019
End Date: 1/14/2021
Position Type: Contract

Job Summary:
Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test.

Responsibilities will include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.
Perform other duties as assigned.

Qualifications and Education Requirements
BS+3-5 YRS or MS+0-3 YRS
Bachelors degree in a STEM discipline.
Experience with C, C++, Java, or a related language
Software development process in a team environment
Desired Skills
Windows or Linux application or server-side development
Development of real-time systems or use of real-time operating systems (RTOS)
Developing SW for air vehicle systems
Service Oriented Architecture development or Distributed Programming
Hardware/Software Integration
Model-based software development
LUA and/or Python
Ability to build and maintain relationships, collaborate with others, engage in constructive conflict, and manage interpersonal dynamics
Strong decision making and judgment
Oral and written communication skills
Financial and business acumen
Demonstrated experience and ability to deliver results
Experience using standard office software tools
Ability to travel

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ - Expert Level No 1 2 - 4 Years
Software Skills Java No 1 1 - 2 Years

Qty 1 position
 
Job Number: JE-2152-1TS
Job Location: Palmdale, CA
Rate: 98.52/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance CA

Description:
166425 Job Title: Software Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2151-1
Max Pay Rate: $108.00/hr
Start Date: 10/14/2019
End Date: 1/14/2021
Position Type: Contract


Job Summary:
Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test.

Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.
Perform other duties as assigned.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
Basic Qualifications
Bachelors degree in a STEM discipline.
Experience with C, C++, Java, or a related language
Software development process in a team environment

Desired Skills
Windows or Linux application or server-side development
Development of real-time systems or use of real-time operating systems (RTOS)
Developing SW for air vehicle systems
Service Oriented Architecture development or Distributed Programming
Hardware/Software Integration
Model-based software development
C#, Python, and/or PERL
Ability to build and maintain relationships, collaborate with others, engage in constructive conflict, and manage interpersonal dynamics
Strong decision making and judgment
Oral and written communication skills
Financial and business acumen
Demonstrated experience and ability to deliver results
Experience using standard office software tools
Ability to travel

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1 4 - 6 Years
Software Skills Java No 1 6 + Years

Qty 1 position
 
Job Number: JE-2151-1TS
Job Location: Palmdale, CA
Rate: 108/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
166657 Job Title: Software Engineer

Work Site Address: Marietta, GA 30063
Job Number: 2326-1
Max Pay Rate: $95.00/hr
Start Date: 11/5/2019
End Date: 2/4/2021
Position Type: Contract
Job Summary:
Responsibilities will span the technology development life cycle, including requirements generation, system and software design and implementation, and integration and flight test.

Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.

Qualifications and Education Requirements
BS+3-5 YRS or MS+0-3 YRS
Basic Qualifications
STEM Degree
C++, C
Linux and developmental toolchains
RTOS
Responsibilities will span the technology development lifecycle.
Experience with compilers, debuggers, static analysis tools, and dynamics analysis tools
Experience with embedded real-time systems
Experience with version control (git, subversion, etc.)
Ability to travel (Approximately 15%)

Desired Skills
Experience with Systems Engineering processes (requirements development, use cases, data flows, etc.)
Experience with Python
Experience working with safety/flight critical software development processes (e.g. MIL-STD-516C, MIL-HDBK-1797, AC-17-01)
Experience with automated test methodologies
Experience with networking protocols (e.g. IP, UDP, RTP, etc.)
Experience with Modeling and Simulation (including familiarity with MATLAB)

Skills: Category Name Required Importance Experience
Software Skills C++ Yes 1 2 - 4 Years

Qty 2 positions
 
Job Number: JE-2326-1S6
Job Location: Marietta, GA
Rate: 95/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
166534 Job Title: Software Engineer

Work Site Address: Marietta, GA 30063
Job Number: 2209-1
Max Pay Rate: $110/hr
Start Date: 11/4/2019
End Date: 2/4/2021
Position Type: Contract

Job Summary:
Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test.

Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
STEM Degree

C++ or C
Experience with Linux and development toolchains
Experience with RTOS and development toolchains
Experience with compilers, debuggers, static analysis tools, and dynamics analysis tools
Experience with embedded real-time systems
Experience with version control
Ability to travel (Approximately 20%)

Desired Skills
Experience with Systems Engineering processes
Experience with Python
Experience working with safety/flight critical software development processes (e.g. MIL-STD-516C, MIL-HDBK-1797, AC-17-01)
Experience with automated test methodologies
Experience with networking protocols
Experience with Modeling and Simulation
Experience with Flight Control Laws
Experience with Vehicle Management System (VMS) architectures
Experience with Xilinx UltraScale SOM architecture
Experience with hardware protocols

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ - Expert Level Yes 1 6 + Years
Software Skills Linux Yes 2 6 + Years

Qty 2 positions
 
Job Number: JE-2209-1S6
Job Location: Marietta, GA
Rate: 110/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance GA

Description:
166658 Job Title: Software Engineer

Work Site Address: Marietta, GA 30063
Job Number: 2325-1
Max Pay Rate: $120.00/hr
Start Date: 10/24/2019
End Date: 1/24/2021
Position Type: Contract

Job Summary:
Responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, and integration and flight test.

Responsibilities may span the avionics services, to include ground station development as well as mission systems software technologies. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.

Qualifications and Education Requirements
BS+11 YRS or MS+9 YRS
STEM Degree
C++ or C
Experience with Linux and development toolchains
Experience with RTOS and development toolchains
Experience with compilers, debuggers, static analysis tools, and dynamics analysis tools
Experience with embedded real-time systems
Experience with version control
Ability to travel (Approximately 20%)

Desired Skills
Experience with Systems Engineering processes
Experience with Python
Experience working with safety/flight critical software development processes (e.g. MIL-STD-516C, MIL-HDBK-1797, AC-17-01)
Experience with automated test methodologies
Experience with networking protocols
Experience with Modeling and Simulation
Experience with Flight Control Laws
Experience with Vehicle Management System (VMS) architectures
Experience with Xilinx UltraScale SOM architecture
Experience with hardware protocols

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ - Expert Level Yes 1 6 + Years
Software Skills Linux Yes 2 6 + Years


Qty 1 position
 
Job Number: JE-2325-1S6
Job Location: Marietta, GA
Rate: 120/hr DOE
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
166452 Job Title: Software Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2165-1
Max Pay Rate: $103.70/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Looking for world class talent in Software Engineering to be a part of a team that will carry on our 75 year tradition making history in advanced aircraft development.
This position is with the Advanced Development Programs Software Systems group in Fort Worth, TX. This position requires an experienced software engineer to be a part of a strong software development team. The team uses a wide application of modern technical principles, theories, and concepts in the software field to develop, integrate, and test open mission systems software products that can be applied to air and ground based systems.

The candidate will be responsible for all phases of developing software. Candidate responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, integration and flight test, and adjudicating change requests as the software is updated, tested, and integrated. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.
The successful candidate will lead a high-performing multi-site, multi-program team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills. The successful candidate must have demonstrated effective communication skills as the position will require frequent inter-organizational and outside customer interactions. The ability to travel on occasion for team interaction and integration and test activities is required.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
STEM Degree
The successful candidate will need to pass a security screening before interview.
Demonstrated leadership experience is required. Experience with C/C++ is required. Experience with XML based open standards, modular open mission systems architectures, Common Software Baseline processes, and Agile processes and tools is highly desired. The candidate must have experience with all phases of the Software Engineering Process from requirements generation, through development, integration, and test. In addition, recent work experience with embedded architectures, single board computers, hardware and software in the loop implementation and testing, and F-35 Mission Systems Software is a plus.

Desired Skills
C and Java languages
XML knowledge
Service Oriented Architecture Knowledge
Object Oriented Analysis and Design
Object Oriented Programming
Agile Software Development
Linux and Windows Operating Systems
Message Broker Technology (e.g. Active MQ)
UML tools (e.g. Rational Rose, Rhapsody)
Configuration Management Systems (e.g. Git)
Agile Process Tools (e.g. Version One)
Software Development Tools (e.g. Visual Studio, Eclipse)
Atlassian Tools (e.g. Stash, Jira)
Continuous Integration (e.g. Jenkins, Bamboo)
Requirements generation and system interface development
System test and Integration experience
UCI Knowledge
Modular Open Mission Systems Development
Mission Systems and Battle Management Knowledge

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ - Expert Level No 1 4 - 6 Years


Qty 1 position
 
Job Number: JE-2165-1TS
Job Location: Fort Worth, TX
Rate: 103.70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / C++ - no clearance FL

Description:
166637 Job Title: Software Engineer

Work Site Address: Riviera Beach, FL 33404
Job Number: 2427-1
Max Pay Rate: $50.00/hr
Start Date: 11/4/2019
End Date: 11/1/2020
Position Type: Contract

Job Summary:
Plans, conducts, and coordinates software development activities. Designs, develops, documents, tests, and debugs software that contains logical and mathematical solutions to business/mission problems or questions in computer language for solutions by means of data processing equipment

Applies the appropriate standards, processes, procedures, and tools throughout the development life cycle. Applies knowledge of computer hardware and software, subject matter to be programmed in business/mission applications, information processing techniques used, and information gathered from system users to develop software. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Ensures software standards are met.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Visualization/Simulation
Basic Qual: Software programming with C++, Physics Engines or Graphics Programming. degree required

Desired Skills: Demonstrated proficiency in C++, 3D Studio Max modeling experience and plugin development, Unity, Unreal Engine, or OGRE 3d experience. Familiar with all aspects of rendering a dynamic, simulated scene including management of light sources, shading, culling, and environmental effects. Strong background in mathematics and physics, specifically experience in the numerical solution of linear and non-linear differential equations and a good working knowledge of matrix mathematics. Experience with embedded programming and operating systems a plus (QNX, Linux, VxWorks). Knowledgeable of high-end graphics hardware industry (latest video cards, GPUs, etc).

Computer Science Degree:
Full Sail University , UCF -Interactive Entertainment Masters Degree or similar education is a plus

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ Yes 7 2 - 4 Years
Technical Skills Graphics and Digital Application Experience Yes 4 1 - 2 Years

Qty 1 position
 
Job Number: LMRMS-2427-1
Job Location: Riviera Beach, FL
Rate: 50/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / Robotics - no clearance FL

Description:
166634 Job Title: Software Engineer

Work Site Address: Riviera Beach, FL 33404
Job Number: 2429-1
Max Pay Rate: $50.00/hr
Start Date: 11/11/2019
End Date: 11/9/2020
Position Type: Contract

Job Summary:
Plans, conducts, and coordinates software development activities. Designs, develops, documents, tests, and debugs software that contains logical and mathematical solutions to business/mission problems or questions in computer language for solutions by means of data processing equipment.

Applies the appropriate standards, processes, procedures, and tools throughout the development life cycle. Applies knowledge of computer hardware and software, subject matter to be programmed in business/mission applications, information processing techniques used, and information gathered from system users to develop software. Corrects program errors, prepares operating instructions, compiles documentation of program development, and analyzes system capabilities to resolve questions of program intent, output requirements, input data acquisition, programming techniques, and controls. Ensures software standards are met.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Robotics


Basic Qualifications:
Demonstrated ability to design, implement, and deploy advanced Software algorithms on unmanned systems
-Strong math and algorithmic background. Strong C/C++ skills.
-Hands on experience with robotics/unmanned systems (marine robotics is a plus).
-Candidates must have proficiency in one or more of the following areas:
-Sensing
-Perception and World Modeling
-Mission and Path Planning
-Behavior Design and Contingency
Management
-Fault Handling

Desired:
-Learning systems are not an initial focus area but additional expertise in machine learning is a plus.

Skills: Category Name Required Importance Experience
Areas of Expertise Robotics Yes 8 2 - 4 Years
Technical Skills Strong math background Yes 6 2 - 4 Years

Qty 1 position
 
Job Number: LMRMS-2429-1
Job Location: Riviera Beach, FL
Rate: 50/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer / software discloser or software license assessor - no clearanceTX

Description:
166701 Job Title: Software Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2450-1
Max Pay Rate: $56.20/hr
Start Date: 11/1/2019
End Date: 5/1/2020
Position Type: Contract


Job Summary:
Will perform a preliminary technical analysis role as a software discloser or software license assessor, executing analysis and preliminary assessments of open source and other third party software using established tools and processes.

Will determine what types of licensing, copyrights, and other attributions are contained within the software package and make initial recommendations to the assessor regarding overall suitability for use within the company with respect to intellectual property (IP). Recommendations concerning suitability and risk potential will be developed under the guidance of the team lead and other members. This individual will be expected to work closely with the others in the team to learn the processes and tools and may be called upon to perform business analysis tasks with the customer to understand their requirements. Additional opportunities exist for developing and modifying software tools used in performing daily tasks.

Software development, specifically with build experience.
Experience with C++/C#/JAVA , (No scripting languages like Python or JavaScript).

Experience with Agile development of Open Source Software, either creation of new software or modification/combination of existing, with an understanding of how FOSS software is constructed.


Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
5-10 years experience in development of software
Requires a degree in Computer Science or Software Engineering

Preferred Skills
Skills: Category Name Required Importance Experience
Technical Skills Software Development Yes 1 4 - 6 Years

Qty 8 positions
Must be a US Citizen
 
Job Number: JE-2450-1
Job Location: Fort Worth, TX
Rate: 65/hr max
Per Diem: pd split possible
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer Manager

Description:

DESCRIPTION



Each day you are in the office the lives of patients will be improved.



As the Software Engineering Manager for the Services Delivery Team, you will own the development, maintenance, and deployment of our custom healthcare administration applications. As the head of a team of 4 Software Engineers, you'll translate business requirements into user stories/technical requirements. Because you will understand our client's needs, you will prioritize the workflow/load of the engineers you lead, making sure the client's needs are met while also providing guidance to your team to ensure they have what they need to create clean, concise, and effective code. This role will report to the VP of Research & Development, with a dotted line to the VP of Product Experience. As you will be both externally (customer) and internally facing - strong communication & leadership skills are a must. In this role, you will:




  • Prioritize the workload of engineers you lead

  • Guide the professional development of your software engineers through coaching, mentoring, 1:1 sessions, and code reviews

  • Gather and translate requirements from our clients, and draft user stories/ requirements accordingly

  • Write clean, concise, and well documented code

  • Deploy, upgrade, and monitor many applications

  • Participate in daily scrum meetings

  • Attend collaborative design sessions with technical teams across the business

  • Contribute to each part of the software development life cycle




  • Help design and implement functional requirements

  • Manage testing and bug fixes

  • Prepare technical documentation

  • Implement software enhancements and suggest improvements



REQUIREMENTS




  • Strong experience with Python. You know it well enough to successfully mentor other engineers.

  • Professional experience in an enterprise codebase. You've been thrown into an unfamiliar codebase before, and can quickly find your way around, and push quality production code quickly.

  • Experience as a technical team lead









DESIRED (BUT NOT REQUIRED) SKILLS & EXPERIENCES




  • Knowledge of healthcare administrative processes

  • Knowledge of cloud naive technologies such as docker, kubernetes, gRPC

  • Knowledge of Pytest and common python testing methodologies



BENEFITS




  • Competitive salary that correlates with your ability to contribute

  • Generous vacation + sick time allotment

  • 4 hours/ month paid community service time

  • Equity incentive plan

  • Medical, Dental, & Vision, GTL, STD, LTD Insurance with employer contribution

  • 401k + Employer Match

  • Fun office perks including snack bar, dog-friendly environment, recreation room, modern layout, and indoor/ outdoor transitional space

  • Friday brown bag lunch & learns


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.


 
Job Number: 19-37906
Job Location: Mesa, AZ
Rate: 140000.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-11 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: David Darnell
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers - Many Needed

Description:
Develop real-time embedded software for the most sophisticated military aircraft.

Key responsibilities could include:

•Software Algorithm Development using advance Machine Learning techniques.
•Software development, modeling, simulation, testing, and/or analysis using C, C++, C#, Python, Java, MatLab, Ada, or Linux.
•Working with customers and other engineers to define requirements, such as understanding and agreeing upon the function of the software system.
•Architecting and designing software to meet current and future requirement.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Soft-MO-Boe
Job Location: St. Louis, MO
Rate: $80.00-$85.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Principal Engineer System Architect 4 CA

Description:
166292/1799 Sr Principal Engineer System Architect 4 (Job Number: 19026178)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Nov 25, 2019

Target End Date: Nov 20, 2020

Pay rate: $60.00 - $65.00

Location: San Diego

Schedule: 9/80

Duration of assignment: Up to 1 year

Designs, develops, automates, and maintains productivity tools using programming, database or scripting languages to improve software modeling and development. Develops computer systems specifications that address business requirements and that fit with the company's system architecture standards. Establishes and documents system parameters and formats, ensures hardware and software systems compatibility and coordinates and/or modifies system parameters in terms of existing and projected computer capacity and capabilities. Revises existing systems and procedures to correct deficiencies and maintain more effective data handling, conversion, input/output requirements, and storage.


Basic Qualifications:

•Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 14 years of engineering experience
•Must have experience with the following software development tools and database systems: Visual Studio 2008, 2010, and 2013, .NET, and SQL SSIS

Preferred Qualifications:

•Master’s Degree in a Technical Field
•Project Management experience
 
Job Number: JK-1799ATO
Job Location: San Diego, CA
Rate: 60-65/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Integration Engineer

Description:
LOCATION Orlando, FL
DESCRIPTION General Summary
The Sr. Integration Engineer serves as the lead design and test engineer in the development of custom automatic electronic test systems (hardware, software, and interfaces) required for testing assemblies and sub-assemblies for overall acceptance, functionality, and performance. Develops test methodologies and procedures to ensure systems integrity and in accordance to specifications, requirements, and engineering documentation for the replication and traceability of system designs. Provide direct input during design reviews and technical audits. Provide direct support for delivery and installation of test systems at customer sites.
Principal Duties and Responsibilities
1. Applies advanced concepts, theories and engineering principles in the design, development, integration, and acceptance testing of automated electronic test systems.
2. Determines design requirements and develops software for electronics test systems including test program software, self-test software, and system level instrument drivers.
3. Partners with customer technical staff in defining test requirement and test strategy for the development of test software to perform functional and diagnostic tests on customer’s electronic devices.
4. Oversees the development of the electromechanical interface between the test system and the customer’s electronic devices.
5. Provides direct input to the design of electrical/electronic circuits and wiring for integrated test systems.
6. Participates directly in the assembly and integration of electrical, electronic, and mechanical systems.
7. Develops engineering documentation including assembly drawings, schematics, operating procedures, calibration procedures, and other related technical documents.
8. Provides assessments/recommendations in product/system design reviews for developed test systems.
Job Specifications
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.







Qualifications/ Experience
1. Multi-discipline experience in military and commercial electronic systems ranging from test equipment and instrumentation, flight electronics, computers, jet engines, and other special purpose electronic systems, including RF subsystems.
2. Extensive experience with electronic circuit design, circuit card layout, test systems development, and test systems integration.
3. Experience with GPIB, VME/VXI, and PXI/PXIe test platforms is a plus.
4. Thorough knowledge of the process in taking a product design from concept to production with demonstrated success in test solutions regarding analog and digital electronics development, integration, and troubleshooting.
5. Analytical reasoning and problem solving with knowledge in performing root cause analysis and recommending corrective action to resolve test failures.
6. Software experience with automatic test system development environments such as LabVIEW, LabWindows/C/C++/C# VisualBasic, or C#.
7. Experience in designing to meet Environmental requirements such as shock, vibration, thermal, humidity, altitude, salt/fog, etc.
8. Experience designing to meet Electromagnetic Interference (EMI) requirements.
9. Good knowledge of metals and alloys and their properties and sheet metal design
10. 7+ years of hands on engineering design experience
11. Must be a US person.

Education:
1. Bachelor’s in Electrical Engineering (BSEE), Computer Engineering or Computer Science (BSCE/BSCS) from four-year college is required

Computer Skills:
1. LabVIEW, Test Stand, LabWindows CVI, C/C++/VisualBasic, or C#.
2. Word processing, Spreadsheets, Internet software, E-mail, Database software
3. Experience with Altium Designer for schematic capture and layout
 
Job Number: 1002
Job Location: Oralndo, FL
Rate: Hourly Rate
Per Diem: Yes
Overtime: Yes
Duration: 6-12monts
Start Date: Q1
Input Date: 11/14/2020
Firm Name: EXPLEO USA INC
Attention: Faith Wilson
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Project Architect

Description:

Nesco Resource is partnering with a national architectural firm in its search for a Sr. Project Architect for its Latham location. Our client is grounded yet progressive and offers competitive compensation and benefits!



Candidates should come with 8-10 years of experience in architectural CAD production and document coordination. In this role, you will be developing and executing architectural design work for both public and private clients .You will also coordinate the efforts of both in-house and outside teams who handle structural engineering, MEP design, civil and environmental engineering services. We're looking for an enthusiastic go-getter who is just as comfortable managing the work as they are interfacing with clients.



Job Responsibilities




  • Makes decisions and recommendations that are recognized as authoritative and have an important impact on extensive architectural activities.

  • Ability to demonstrate creativity, foresight and mature architectural judgment in anticipating and solving challenging architectural problems.

  • Determine project objectives and requirements.

  • Develop standards and guidelines for diverse architectural activities.

  • Determine compliance with technical documents and industry specific standards and codes.

  • Involved in the analysis of client problems in conceiving and developing architectural solutions to those problems.

  • Manage, coordinate and mentor staff and project level employees.

  • Manage all aspects of client relations including attending meetings.

  • Perform other like duties as assigned.



Education and Qualifications




  • 10+ years of architectural design experience.

  • Extensive knowledge of Architectural Design.

  • Exceptional knowledge of AutoCAD, Revit and other BIM software.

  • The ability to work and thrive in a team environment.

  • Knowledge of project specifications & CSI division formatting.

  • Strong organizational, time management & multitasking skills.

  • Excellent communication skills both oral and written.

  • Proficiency in Photoshop, Sketch-Up, and Microsoft Office.

  • Bachelor's degree in Architecture highly desired.

  • Professional RA, desired.

  • Architecture enrollment in NCARB IDP preferred.

  • LEED certification a plus.














Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38618
Job Location: Latham, NY
Rate: 125000.0USD/Hour
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-09-17 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Henry Hunn
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Software Engineer /Perm Direct Hire

Description:
Nesco Resource has an exciting permanent position available for a Technical Business Analyst in the Medical Device Industry.

  • The Business Analyst works as a liaison among SBU and Corporate to analyze, communicate and validate requirements for changes to business processes and information systems. The Business Analyst understands business problems and opportunities in the context of the requirements and recommends solutions that enable the organization to achieve its goals. The Business Analyst develops and manages user requirements for business process improvement and information technology efforts.

  • Serves as the subject matter expert with respect to business systems applications, Camstar MES and Dynamics AX, for configuration, customization and usage, maximizing end user adoption.

  • Write detailed description of user needs, program functions, and steps required to develop or modify business applications.

  • Develop and maintain business process and system documentation and workflows in support of process improvement activities enabled by information technology.

  • Consults with developers on application design, development, testing and implementation.

  • Coordinate modifications of ERP solutions. Supervise and manage test as part of change control & system validation processes

  • Work on data development efforts in coordination with functional areas to support product launches

  • Support all core local systems solutions for the business

  • Create and lead User Acceptance test plans

  • Remains abreast of changes in system software and hardware requirements.

  • Reviews current and future technologies and present recommendations to IT Management.

  • Maintains full compliance of all corporate network Standards and SOPs.

  • Education:

  • Bachelor's degree in Computer Science/Computer Information Systems or related degree

  • Certifications/Licensing:

  • PMP and/or Business Analyst certifications a plus


Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
 
Job Number: 19-38442
Job Location: Richardson, TX
Rate: 95.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-11-11 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Technical writing experience in completions publications such as, outfitting wiring diagram manuals, outfitting maintenance manuals and cabin operating manuals.

Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.


Position Purpose:
Directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content.

Principle Duties and Responsibilities:

Essential Functions: 1. With minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
 
Job Location: Savannah, GA
Rate: $34
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Software (5 openings) - Clearance FL

Description:
166746 Job Title: Staff Engineer Software (5 openings)

Work Site Address: 2000 W Nasa Blvd, Melbourne, FL 32901
Job Number: 1822
Max Pay Rate: 85.00
Start Date: 12/16/2019
End Date: 11/12/2021
Position Type: Contract


Job Summary:
Position is a contract to hire Software Engineer that will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.

Basic Qualifications:

•Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university plus 14 years of software engineering experience OR Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 12 years of software engineering experience.
•Experience developing software / writing code in C/C++ or Ada
•Experience with Linux


•Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
•Strong Problem Solving Skills
•Experience in Software Test
•Familiarity with Atlassian tool suite and tools like git and Confluence
•Familiarity with Agile software development process
•DOORS experience
•Eclipse or other integrated development environment (IDE)
•Knowledge of Linux systems with basic commands
•Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
•Experience with OpenGL


Length of contract is up to 12 months with option to hire.
 
Job Number: JK-1822S
Job Location: Melbourne, FL
Rate: 85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Software Engineer

Description:
Staff Software Engineer

Location: Phoenix AZ
Rate: $68.00/hr.
Shift: 1st
Duration: 6 Months
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

The Software Engineer will work with a global team of engineers in Phoenix and India, on real time embedded software for electronic control units for aerospace applications. The role will involve requirements definition using DOORS or structured modelling, detailed design, code implementation using embedded C, validation of requirements and verification of implementation. It also includes managing Problem reports for the software that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and work well in a team environment.

Primary Responsibilities
* Executing new product introduction, value engineering, and production support projects
* Establishes software design requirements traceability, flow down requirements, development of code and test cases.
* Hands on debugging of code during integration and lab testing.
* Developing complex sub-system trade studies, algorithms, and error budgets.
* Driving the usage of appropriate Lean Product Development tools to support cost effective technical solutions with heavy focus on platform design, reuse, and knowledge-management.

Basic Qualifications
* Proficient with C programming language, and embedded systems in a lab environment.
* Experience with Microprocessors, Micro-controllers, and/or DSPs
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change Preferred Qualifications
* 6+ years experience in software development
* Experience working within DO-178B/C certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Model Based Development, using SysML, Simulink or SCADE
* Experience with the following industry guidance: DO-330, DO-331, DO-254, ARP4754A
* Knowledge and use of ADA, Assembly, Perl, C#
* Software Verification including, test procedure development, robustness testing and debug
* Experience with software configuration management and problem reporting tools

Additional Job Details:
* Labview Test Stand experience
* Programming in Labview
* Working in Lab to Test Hardware
* Low level peripheral driver development for the TMS570 and LS1021A
* Develop an application for the LS1021A
* Develop a mechanism for linking generic signal processing functions to I/O data via configuration tables
* Travel will be required to Rockford and/or Jamestown
 
Job Number: 11636
Job Location: Phoenix, AZ
Rate: 68.00
Per Diem: No
Overtime: Possible
Duration: 6mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****Active Secret Clearance highly preferred. Position may require a clearance****

Job Description:
1. Structural analysis in support of aerospace structures.
2. Our client seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis.
3. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.
4. Aerospace experience is required.
5. Familiarization and use of specialized tools for structural analysis is required.
6. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
7. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.


Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11851
Job Location: Fort Worth, TX
Rate: $61.00 - $69.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

Job Description:
1. Uses computational methods and tools in a specialized field (strength of metallic and composite structures, finite element analysis, fatigue and damage tolerance, etc.).
2. Performs pre-dimensioning computations by implementing analytical or digital computation methods and pass judgment on the credibility of the data received and the results obtained.
3. Take part in drawing up the measurement plan applicable to the tests, and analyses the results.
4. Required experience with structural mechanics simulation software and ANSYS.
5. Familiarity and experience with other FEA tools such as NASTRAN, other pre/post processor software, as well as knowledge of MIL-HDBK-5 is also required.
6. Candidate must have working knowledge/experience with Computer Aided Design software tool CATIA V5 (preferred) as well as PRO Engineer / Wildfire 4.
7. Candidate must be capable of interpreting detail, assembly, and installation type drawings.

Education:
1. Level 4: BS+16 YRS or MS+14 YRS
 
Job Number: 11578
Job Location: Palmdale, CA
Rate: $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress DADT/Dynamics/FEA/FEM - Clearance CA

Description:
166664
Job Title: Structural Analysis - Stress DADT/Dynamics/FEA/FEM


Work Site Address: Palmdale, CA 93599
Job Number: 2302-1
Max Pay Rate: $90.00/hr
Start Date: 10/23/2019
End Date: 6/19/2020
Position Type: Contract

Job Summary:
This position requires an Airframe Stress Analyst to use their technical expertise to analyze aircraft structure and subsystems installations. The candidate will apply his or her understanding of the technical principles of structural analysis toward the solution of technical problems. The candidate will have thorough knowledge in the field of aircraft structural analysis and will have a broad knowledge of all related disciplines.

Roles and Responsibilities
The candidate will be responsible for preliminary and detailed analysis of aircraft structures, structural assemblies, participation in trade studies and coordination with Integrated Product Teams.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
14 years or more of professional experience; or 12 years of professional experience with a related Masters degree
Experience conducting high temperature analysis on airframe primary structure. Familiarity with high temperature material and joint applications (high thermal gradients, CTE material mismatch and thermal stresses @ 1,200F+)

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Program Management Yes 1 6 + Years
Areas of Expertise Project Scheduling Yes 1 4 - 6 Years
Areas of Expertise Structures Yes 1 6 + Years
Areas of Expertise Analysis No 1
Areas of Expertise Composites and Materials No 1
Soft Skills Ability to Coach or Mentor Co-Workers Yes 1 6 + Years
Soft Skills Ability to Work with Others Yes 1 6 + Years
Soft Skills Writing proposals and reports Yes 1 4 - 6 Years
Soft Skills Leadership Skills No 1
Software Skills Finite Element Analysis (FEA) Yes 1 6 + Years
Software Skills Nastran Yes 1 6 + Years
Software Skills Patran Yes 1 6 + Years

Software Skills Abaqus No 1
Technical Skills Ability to write technical documents and end-user documentation Yes 1 6 + Years
Technical Skills Project Planning Yes 1 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
Technical Skills Ansys No 1
Technical Skills Cost Estimation No 1
Technical Skills Engineering No 1
Technical Skills Hypermesh No 1
Technical Skills Knowledge of materials, substances and their characteristics No 1
Technical Skills Metallics Background No 1

Qty 1 position
 
Job Number: JE-2302-1S5
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 8 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
166404 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Palmdale, CA 93599
Job Number: 2045-1
Max Pay Rate: $90.00/hr
Start Date: 9/30/2019
End Date: 9/29/2020
Position Type: Contract

Job Summary:
Uses computational methods and tools in a specialized field (strength of metallic and composite structures, finite element analysis, fatigue and damage tolerance, etc.)

Job Description:
Performs pre-dimensioning computations by implementing analytical or digital computation methods and pass judgement on the credibility of the data received and the results obtained. Take part in drawing up the measurement plan applicable to the tests, and analyses the results.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Required experience with structural mechanics simulation software and ANSYS.
Familiarity and experience with other FEA tools such as NASTRAN, other pre/post processor software, as well as knowledge of MIL-HDBK-5 is also required.

Candidate must have working knowledge/experience with Computer Aided Design software tool CATIA V5 (preferred) as well as PRO Engineer / Wildfire 4.
Candidate must be capable of interpreting detail, assembly, and installation type drawings.

Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 1 6 + Years
Technical Skills Stress Analysis Yes 1 6 + Year

Qty 2 positions needed
 
Job Number: JE-2045-1S5
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM TX

Description:
166857 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Fort Worth, TX 76108
Job Number: 2612-1
Max Pay Rate: $69.00/hr
Start Date: 12/3/2019
End Date: 12/31/2020
Position Type: Contract


Job Summary:
Structural analysis in support of aerospace structures.

Roles and Responsibilities
Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Aerospace experience is required.
Familiarization and use of specialized tools for structural analysis is required.
Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.

Qty 15 positions
 
Job Number: JE-2612-1ATO
Job Location: Fort Worth, TX
Rate: 69/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
• Must have experience with primary and secondary structural design.
• Must have experience with a CAD software (Catia, UG, etc.). SolidWorks is preferred.
• Experience with completions, or interiors is a plus
• Degree is not required, but preferred.


The Structures Company is an AA/EOE.
 
Job Number: 344
Job Location: IN
Rate: $50-$57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - CPD Or Fibersim Experience Required

Description:
Description
Develops CATIA 3D models, CPD definition, and 2D engineering definition for detail parts, assemblies, and installations
Establishes manufacturing tolerances for production of structural components
Develops and documents requirements and interface constraints for components
Coordinates with the structural substantiation department to ensure component performance in flight environments
Supports test definition to verify that components and manufacturing processes meet design intent and engineering requirements
Participates in the review, approval, and release process of engineering definition
Supports creation and review of manufacturing plans to ensure compliance with design requirements and company processes
Supports components throughout full lifecycle from prototype to final acceptance as well as modifications and repairs after installation
Uses engineering judgment to evaluate manufacturing issues and disposition nonconformance reports (NCR)


Qualifications
Bachelor’s degree from an accredited institution, with a concentration in Aeronautical, Astronautical, Aerospace, or Mechanical Engineering
3 years or more experience in structural design engineering for aerospace composite fabrication and assembly processes
Proficient with CATIA V5
Experience with Composite Part Design (CPD), or Fibersim. Assembly Design, Sketcher, Drafting, Wireframe, Surface Design
Experience with Generative Shape Design (GSD), GD&T and ASME Y14.5M-1994 drafting standards
Knowledge of manufacturing methods for various materials (composite layup, metal machining, 3D printing, bonded assembly, mechanical assembly)
Experience designing for aerospace environments
Experience in the development of human spaceflight hardware desired
Experience with Product Lifecycle Management (PLM) software and configuration management processes
Excellent analytical and decision-making skills
Excellent verbal and written communication skills. Excellent organizational and time-management skills Strong team player.
Proficient in Microsoft Office: Word, Excel, PowerPoint, Outlook

The Structures Company is an AA/EOE.
 
Job Number: 265
Job Location: Mojave, CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Subcontract Administrator / FAR / federal acquisition regulations is required - no clearance SC

Description:
Job Title: Subcontract Administrator

Work Site Address: Greenville, SC 29605
Job Number: 2667-1
Max Pay Rate: $35.00/hr
Start Date: 11/21/2019
End Date: 11/21/2020
Position Type: Contract

Job Summary:
Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services for subcontracts in support of development, production and global sustainment for multiple contract types.

Prepares bid packages, conducts bidders' conferences, develops evaluation criteria, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes subcontract packages for review, prepares awards and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. May sign supplier agreements and purchase orders within established authority.

Qualifications and Education Requirements
Knowledge of federal acquisition regulations is required.

Skills: Category Name Required Importance Experience
Areas of Expertise Purchasing No 1
Software Skills MS Office No 1
Software Skills SAP No 1


Qty 2 position
 
Job Number: JEG-2667-1
Job Location: Greenville, SC
Rate: 35/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Ops Coordinator CA

Description:
Supply Chain Ops Coordinator (Job Number: 19028585)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 2nd Shift

Target Start Date: Oct 5, 2019

Target End Date: Oct 5, 2020

Pay rate: $20.00 - $23.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: El Segundo
Work schedule: 5/40 - Second shift


•Maintain schedules for material requirements and availability for the manufacture of industrial and commercial products to support production control.


•Compile records concerning quantity, cost, and type of material received, shipped, in stock or inventory, and/or in production.


•Expedite flow of materials, parts, and assemblies within or between departments in accordance with production and shipping schedules.


•Assist in determining possible and actual shortages may initiate action to correct these deficiencies.


•Use knowledge of production, procurement, and engineering departments to alert proper authorities regarding potential problems and appropriate remedial action.


•Estimate and log production rate and time expenditures and may be required to establish sequence and lead time of each operation to meet shipping dates.

Deliver stock or inventory to the manufacturing floor and/or supplies to business areas


Basic Qualifications:



•High School Diploma and
2 years additional education and/or related experience.

•Microsoft Office knowledge.


•Strong Excel background.


•Knowledge of SAP/R3 or similar ERP software.


•General understanding of continuous process improvement.


•Must be able to obtain a Secret Clearance.


•Ability to frequently move and position objects weighing up to 40 lbs.


•Must be able to move stock/inventory/materials around the manufacturing floor and various business units.



Preferred Qualifications:




•Bachelors with 3 years related experience.


•Knowledge of manufacturing work flow and MRP systems or similar.


•Ability to work in a fast paced environment.


•Experience in electronics manufacturing is a plus.
 
Job Number: JK-1806ATO
Job Location: El Segundo, CA
Rate: 20-23/hr max
Duration: 12 months
Start Date: 2nd Shift
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer / E5 F-35 Subject Matter Expert Electronic Warfare / F-35 Reprogramming Labs Systems Engineering- Clearance TX

Description:
166702 Job Title: System Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2395-1
Max Pay Rate: $113.00/hr
Start Date: 10/29/2019
End Date: 1/29/2021
Position Type: Contract

Job Summary:
This position is intended to serve as a technical lead in interfacing with Laboratory customers, developing technical solutions, system requirements decomposition, performing system analysis and trade studies, supplier technical reviews and support, supporting system integration planning, system integration and verification activities that are necessary to successfully complete milestones leading up to the full verification, validation and delivery of the F-35 product capabilities as needed.

Reprogramming Labs Systems Engineering position. The primary responsibility of this position is to serve as Electronic Warfare (EW) Subject Matter Expert to perform System Requirements and Design development as well as support Hardware-In-Loop system integration on laboratory systems.
The responsibilities of technical leadership will include mentoring and teaching less experienced engineering staff to grow an EW technical competency with our organization. This position will require close coordination with Project Leadership and with Joint Program Office (JPO) representatives, plus proactive engagement with L&TS simulation software, subsystem procurement, hardware development teams, and other teams both inside and outside of the company, to ensure an effective system engineering communication interface is established and maintained across the different subsystems development teams.

Qualifications and Education Requirements
BS+11 YRS or MS+9 YRS
This req is at an E5 level. With a focused skill in Electronic Warfare (EW).

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Design & Release No 1 2 - 4 Years
Areas of Expertise Engineering No 1 6 + Years
Software Skills DOORS No 1 4 - 6 Years
Software Skills MS Office - Intermediate Level No 1
Technical Skills Engineering No 1
Technical Skills Engineering Release No 1 4 - 6 Years

Qty 1 position
 
Job Number: JE-2395-1S6
Job Location: Fort Worth, TX
Rate: 113/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Engineer / F-35 required - Clearance TX

Description:
166708 Job Title: System Engineer


Work Site Address: Fort Worth, TX 76108
Job Number: 2393-1
Max Pay Rate: $108.00/hr
Start Date: 11/12/2019
End Date: 2/12/2021
Position Type: Contract

Job Summary:
System Engineering position to work on the F-35 Reprogramming Laboratory Projects.

The primary responsibility of this position is to perform as a technical leader on the reprogramming lab system engineering team in performing planning, system requirements, and MBSE system design of avionics subsystems and high-fidelity simulation that are necessary to successfully complete milestones leading up to the delivery of the reprogramming product capabilities to our customers.This position will require close coordination with the simulation software, hardware and supplier development teams to ensure an effective system engineering interface is established across the different aspects of the Reprogramming Lab products. This position will also provide technical support and advice to the laboratory operations staff to support integration, operation, and upgrades to the deployed systems. This position may require unique program security clearances that will be initiated upon selection and acceptance in filling this position. Final approval of these security clearances is dependent upon the Department of Defense (DoD) and could take an extensive amount of time to be granted. During this waiting period, the work assignments directly related to this position will be limited. Therefore, auxiliary organization work assignments will be provided.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Design & Release No 1 1 - 2 Years
Areas of Expertise Engineering No 1
Software Skills DOORS No 1 2 - 4 Years
Software Skills MS Office - Intermediate Level No 1
Technical Skills Engineering No 1
Technical Skills Engineering Release No 1 2 - 4 Years

Qty 3 positions
 
Job Number: JE-2393-1S5
Job Location: Fort Worth, TX
Rate: 108/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Integration Test Engineer - Clearance FL

Description:
166987 Job Title: System Integration Test Engineer


Work Site Address: Fort Walton Beach, FL 32548
Job Number: 2739-1
Max Pay Rate: $64.00/hr
Start Date: 12/2/2019
End Date: 5/1/2020
Position Type: Contract

Job Summary:
Seeking a Systems Integration and Test Engineer for Fixed Winged platforms - primarily variants of the C-130 - in support of our Special Operations Forces Support Activity (SOFSA) program in Fort Walton Beach, FL. This program is critical to the success of US service men and women deployed throughout the world. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world.

Roles and Responsibilities
Primary job responsibilities includes the following:
Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems. Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints. Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems. Coordinates subsystem and/or system testing activities with programs and other organizations. Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance. Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.

Qualifications and Education Requirements
BS+3-5 YRS or MS+0-3 YRS

Skills: Category Name Required Importance Experience
Areas of Expertise Systems Yes 4 1 - 2 Years
Areas of Expertise Testing and Development Yes 1 2 - 4 Years
Technical Skills Develop/execute test plans Yes 2 1 - 2 Years
Technical Skills Validation Test Plans Yes 3 1 - 2 Years

Qty 1 position
 
Job Number: JE-2739-1S
Job Location: Fort Walton Beach, FL
Rate: 64/hr max
Per Diem: pd split possible
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer / F-35 Joint Strike Fighter program - Clearance TX

Description:
166094 Job Title: Safety Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 1953-1
Max Pay Rate: $63.99/hr
Start Date: 8/30/2019
End Date: 11/20/2020
Position Type: Contract

Job Summary:
System safety engineer for the F-35 Joint Strike Fighter program.

Job Description:
Responsibilities include safety hazard identification for designs and changes to the Air System, hazard analysis, hazard mitigation including assignment of safety requirements to subsystem/components, and oversight through hazard control verification. Perform contractual efforts for the system safety team to meet deadlines with high technical quality. Coordinate and collaborate with internal safety team, product development teams, and customer entities.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Previous experience as a system safety engineer or
software safety engineer
Good communication skills
F-35 aircraft design knowledge
Pilot certification
Functional Hazard Analysis
Weibull analysis
Statistics
MIL-STD-882
DO-178
DO-254

Qty 1 position needed
 
Job Number: JE-1953-1S
Job Location: Fort Worth, TX
Rate: 63.99/hr max
Duration: 18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years with the last investigations within the last 5 years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Basic Qualifications:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11838
Job Location: Fort Worth, TX
Rate: $61.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. As a member of the Skunk Works team, candidate will be involved in the full cycle of a program.
2. Candidate must have strong desire and interest in aircraft and associated weapon systems and ground system operations/avionics, and for hands-on integration work.
3. Successful candidate will be involved in all aspects of systems engineering from architecture and requirements through verification and delivery.
4. Formal educational emphasis or familiarity in the following areas is a plus: mission system architecture; requirement development, and risk and opportunities assessments.
5. Candidate responsibilities will span the technology development life cycle, including requirements generation, risk and opportunity assessment, system and software design and implementation, and integration and flight test.
6. These responsibilities may also span into other areas, to include ground station development as well as mission systems technologies.
7. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
8. The successful candidate must demonstrate effective communication skills as the position will require frequent internal interactions with project leads and other engineers in the group.
9. The ability to travel on occasion for team interaction and integration and test activities is required.

Basic Qualifications:
1. Bachelors or above in STEM discipline or equivalent experience.
2. Experience with mission system architecture development.
3. Experience with requirements and verification/validation.
4. Final Secret Clearance.

Desired Skills:
1. Experience with risk management.
2. Experience developing a systems architecture for new products.
3. Experience with technical reviews.
4. Good communication skills.
5. Experience with MS Office Software products.
6. Experience interfacing and presenting to program management and internal/external customers.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11842
Job Location: Palmdale, CA
Rate: $90.00 - $98.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation in the last 5 years required ****

Job Description:
1. Candidate responsibilities will span the program lifecycle, including setting up new program Configuration Management (CM) processes and tools, performing Data Management (DM) responsibilities, and supporting Engineering and Program Management personnel.
2. The candidate will be required to work with legacy CM/DM data and software systems.
3. The candidate will have to interpret program requirements and develop CM/DM processes to meet customer expectations.
4. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
5. The successful candidate must demonstrate effective communication skills as the position will frequent internal interactions with project leads and other engineers in the group.
6. To include briefing at customer meetings
7. Up to 25% travel required

Basic Qualifications:
1. Bachelors Degree in STEM or Equivalent.
2. Engineering Documentation System experience.
3. Configuration Management experience.
4. Active Secret Security Clearance.

Desired Skills:
1. Experience with Special Missions Program data.
2. Configuration Management training or certification.
3. Excellent communication skills and extensive experience interacting with the customer.
4. Excellent Organizational skills including tracking of configuration status.
5. Ability to generate, disseminate, and execute light weight processes and procedures.
6. Experience with Product Lifecycle Management (PLM) Tools such as CAD Datanet, TeamCenter, or 3DS.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11790
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation in the last 5 years required ****

Job Description:
1. Candidate responsibilities will span the program lifecycle, including setting up new program Configuration Management (CM) processes and tools, performing Data Management (DM) responsibilities, and supporting Engineering and Program Management personnel.
2. The candidate will be required to work with legacy CM/DM data and software systems.
3. The candidate will have to interpret program requirements and develop CM/DM processes to meet customer expectations.
4. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
5. The successful candidate must demonstrate effective communication skills as the position will frequent internal interactions with project leads and other engineers in the group.
6. To include briefing at customer meetings
7. Up to 25% travel required

Basic Qualifications:
1. Bachelors Degree in STEM or Equivalent.
2. Engineering Documentation System experience.
3. Configuration Management experience.
4. Active Secret Security Clearance.

Desired Skills:
1. Configuration Management training or certification
2. Excellent communication skills and extensive experience interacting with the customer.
3. Experience with CAD DataNet Tool

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11788
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years with the last investigations within the last 5 years****

Job Description:
1. This position is with our clients Advanced Development Program (ADP), known as the historic Skunk Works, in Ft Worth, Texas.
2. They are looking for world-class talent for this position to join the 75+ year tradition of creating advanced aircraft.
3. The candidate will join the Combat Air Modernization team as a Systems/Project Engineer assigned to support multiple classified programs.
4. Responsible for cross functional team coordination within Combat Air Modernization on a variety of Program Operations assignments.
5. This position will assist program managers in managing and executing complex programs that bring new capability to our 5th Gen platforms.
6. Candidate must be able to concurrently handle multiple and widely varying assignments simultaneously in a fast paced, ever changing environment.
7. Must have the ability to work independently as well as being a team player and willing to support other team members on a proactive basis in any capacity needed.
8. Must engage professionally and effectively with the senior management.
9. Must be able to successfully meet deadlines and execute to a strict timeline.

Basic Qualifications:
1. B.S. in a STEM Discipline
2. Must have active Secret Clearance reinvestigation within last 5 years
3. Fighter aircraft subsystem development experience.
4. Experience with Microsoft Office


Desired Skills:
1. F-35 Mission Systems and Sensor (including functionality and data on the interface), F-35 software, and fighter aircraft communications systems and datalinks.
2. Experience managing New Business Funds (NBF), Contracted Research and Development (CRAD), Small Business Innovative Research (SBIR), Special Studies, and Capital Acquisition projects.
3. Project Management and Control Account Manager experience.
4. Experience communicating across varied audiences, including written, spoken, and presentation preparation.
5. Experience working in a dynamic environment.
6. Information Assurance Certification.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11792
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years with the last investigations within the last 5 years****

Job Description:
1. This position is with our clients Advanced Development Program (ADP), known as the historic Skunk Works, in Ft Worth, Texas.
2. They are looking for world-class talent for this position to join the 75+ year tradition of creating advanced aircraft.
3. The candidate will join the Combat Air Modernization team as a Systems/Project Engineer assigned to support multiple classified programs.
4. Responsible for cross functional team coordination within Combat Air Modernization on a variety of Program Operations assignments.
5. This position will assist program managers in managing and executing complex programs that bring new capability to our 5th Gen platforms.
6. Candidate must be able to concurrently handle multiple and widely varying assignments simultaneously in a fast paced, ever changing environment.
7. Must have the ability to work independently as well as being a team player and willing to support other team members on a proactive basis in any capacity needed.
8. Must engage professionally and effectively with the senior management.
9. Must be able to successfully meet deadlines and execute to a strict timeline.

Basic Qualifications:
1. B.S. in a STEM Discipline
2. Must have active Secret Clearance reinvestigation within last 5 years
3. Fighter aircraft subsystem development experience.
4. Experience with Microsoft Office


Desired Skills:
1. F-35 Mission Systems and Sensor (including functionality and data on the interface), F-35 software, and fighter aircraft communications systems and datalinks.
2. Experience managing New Business Funds (NBF), Contracted Research and Development (CRAD), Small Business Innovative Research (SBIR), Special Studies, and Capital Acquisition projects.
3. Project Management and Control Account Manager experience.
4. Experience communicating across varied audiences, including written, spoken, and presentation preparation.
5. Experience working in a dynamic environment.
6. Information Assurance Certification.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11791
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. As a member of the Skunk Works team, candidate will be involved in the full cycle of a program.
2. Candidate must have strong desire and interest in aircraft and associated weapon systems and ground system operations/avionics, and for hands-on integration work.
3. Successful candidate will be involved in all aspects of systems engineering from architecture and requirements through verification and delivery.
4. Formal educational emphasis or familiarity in the following areas is a plus: mission system architecture; requirement development, and risk and opportunities assessments.
5. Candidate responsibilities will span the technology development life cycle, including requirements generation, risk and opportunity assessment, system and software design and implementation, and integration and flight test.
6. These responsibilities may also span into other areas, to include ground station development as well as mission systems technologies.
7. The selected applicant will be a member of a high-performing multi-site team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills.
8. The successful candidate must demonstrate effective communication skills as the position will require frequent internal interactions with project leads and other engineers in the group.
9. The ability to travel on occasion for team interaction and integration and test activities is required.

Basic Qualifications:
1. Bachelors or above in STEM discipline or equivalent experience.
2. Experience with mission system architecture development.
3. Experience with requirements and verification/validation.
4. Final Secret Clearance.
5. Experience with risk management.
6. Experience developing a systems architecture for new products.
7. Experience with technical reviews.
8. Good communication skills.
9. Experience with MS Office Software products.
10. Experience interfacing and presenting to program management and internal/external customers.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11781
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications:
1. Seeking Systems Engineering Generalist to perform Technical Management activities.
2. Bachelor’s degree in an Engineering field.
3. Experience working in Aerospace programs.
4. DoD or USG Systems Engineering experience.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11766
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. F-35 Reprogramming Labs Systems Engineering position.
2. The primary responsibility of this position is to serve as Electronic Warfare (EW) Subject Matter Expert to perform System Requirements and Design development as well as support Hardware-In-Loop system integration on laboratory systems.
3. This position is intended to serve as a technical lead in interfacing with Laboratory customers, developing technical solutions, system requirements decomposition, performing system analysis and trade studies, supplier technical reviews and support, supporting system integration planning, system integration and verification activities that are necessary to successfully complete milestones leading up to the full verification, validation and delivery of the F-35 product capabilities as needed.
4. The responsibilities of technical leadership will include mentoring and teaching less experienced engineering staff to grow an EW technical competency with our organization.
5. This position will require close coordination with Project Leadership and with F-35 Joint Program Office (JPO) representatives, plus proactive engagement with L&TS simulation software, subsystem procurement, hardware development teams, and other teams both inside and outside our client, to ensure an effective system engineering communication interface is established and maintained across the different subsystems development teams.

Qualifications:
1. Level 4: BS+11 YRS or MS+9 YRS
2. Electronic Warfare (EW) experience required.

Desired Skills:
1. Design & Release
2. Engineering
3. DOORS
4. MS Office – Intermediate Level
 
Job Number: 11761
Job Location: Fort Worth, TX
Rate: $95.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Job Qualifications:
1. The candidate must have experience in mission systems or avionics.
2. A broad understanding of the F-35 organization (Mission Systems) is desired.
3. Candidate should have familiarity with Mission Systems as well as familiarity with general avionics architectures and functionality.
4. The successful candidate must have exceptional communication skills and ability to create and execute a plan in a challenging and quickly changing environment.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11749
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years with the last re-investigation being within the last 6 years****

Job Description:
1. Systems Engineer with skill sets to be able to be a Product Owner of a SAFe scrum team supporting shared simulation software for Hardware-In-The-Loop, Man-In-The-Loop, and desktop simulations.
2. Activities may include participating in AGILE planning events, sprint planning events, reporting sprint status, requirements development, requirements maintenance, requirements verification, generation and processing of engineering change requests (using Dimensions), and support to software change requests, engineering white-paper development (e.g., concept of operations), performance analysis, and algorithm development/prototyping.

Required Skills:
1. Systems experience.
2. Simulation experience.
3. DOORS experience.

Desired Skills:
1. Testing and Development.
2. Testing Lab experience.
3. C++
4. ClearCase
5. MS Office
6. Ability to write technical documents and end-user documentation.
7. Develop/Execute Test Plans
8. Scheduling
9. Systems Analysis and Design Skills
10. Technical Writing

Education:
1. Level 4: BS+11 YRS or MS+9 YRS
 
Job Number: 11741
Job Location: Fort Worth, TX
Rate: $95.00 - $113.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
2. Mission systems, avionics, or system test experience.

Desired Skills:
1. Strong oral, written, and interpersonal communication skills.
2. Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
3. Able to work overtime and multitask.
4. Familiarity with aircraft vehicle systems or mission system architecture.
5. Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
6. Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11750
Job Location: Fort Worth, TX
Rate: $61.90/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Basic Qualifications:
1. Bachelors degree from an accredited college in a related discipline.
2. The candidate must have experience in mission systems or avionics.
3. Test planning or systems engineering experience.

Desired Skills:
1. Experience with F-22 mission systems labs or working with F-22 lab team test preferred.
2. A broad understanding of the F-22 organization (Mission Systems) is desired.
3. Candidate should have familiarity with Mission Systems as well as familiarity with general avionics architectures and functionality.
4. The successful candidate must have exceptional communication skills and ability to create and execute a plan in a challenging and quickly changing environment.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11707
Job Location: Fort Worth, TX
Rate: $61.90/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Basic Qualifications:
1. This position is with the F-35 Prognostics & Health Management (PHM) team located in Fort Worth TX.
2. This Systems Engineering position is focused on Air Vehicle PHM design, integration and verification.
3. The selected candidate will be responsible for PHM product lifecycle from requirements to delivery of a full PHM system data and software products.
4. The candidate should have an understanding of high-level systems engineering capabilities, development and processes.
5. Development includes requirement generation, system and software design and implementation, integration and adjudicating changes request as the software is updated, tested and integrated.
6. The candidate will work cross-functionally with other engineering disciplines within the program to ensure a comprehensive deployment of software and networking technologies across the system is accomplished.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11706
Job Location: Fort Worth, TX
Rate: $61.90/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. A Bachelor's degree in an Engineering discipline
2. The candidate must have a background in mission systems or avionics.
3. Experience as a Technical Lead or leading a team
4. Test experience desired

Desired Skills:
1. A broad understanding of the F-35 organization (Mission Systems) is desired.
2. Candidate should have familiarity with Mission Systems as well as familiarity with general avionics architectures and functionality.
3. The successful candidate must have exceptional communication skills and ability to create and execute a plan in a challenging and quickly changing environment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11674
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Experience supporting Windows or Linux domains
2. Experience with TCP/IP-based networks.
3. Security + Certification

Desired skills
1. Bachelor's degree or above in a STEM discipline
2. Linux or Windows Powershell scripting
3. Experience with VMware ESXi and vCenter Server
4. Experience with NetApp Filers or other SAN technology
5. Experience in Windows Server and Active Directory Server Administration
6. Experience in Cisco Routing and Switching
7. Developing/Capturing custom Operating System images
8. Experience in Cybersecurity and JSIG implementations
9. Good problem-solving and troubleshooting skills
10. Good documentation and technical writing skills to maintain system(s) configurations and network diagrams
11. Demonstrated self-starter willing to work flexible hours and on-site support
12. Ability to travel as required

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11671
Job Location: Fort Worth, TX
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Experience supporting Windows or Linux domains
2. Experience with TCP/IP-based networks.
3. Security + Certification

Desired skills
1. Bachelor's degree or above in a STEM discipline
2. Linux or Windows Powershell scripting
3. Experience with VMware ESXi and vCenter Server
4. Experience with NetApp Filers or other SAN technology
5. Experience in Windows Server and Active Directory Server Administration
6. Experience in Cisco Routing and Switching
7. Developing/Capturing custom Operating System images
8. Experience in Cybersecurity and JSIG implementations
9. Good problem-solving and troubleshooting skills
10. Good documentation and technical writing skills to maintain system(s) configurations and network diagrams
11. Demonstrated self-starter willing to work flexible hours and on-site support
12. Ability to travel as required

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11672
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation within the last 5 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
- Bachelors degree in an Engineering or Technical Discipline
- Avionics design, integration and troubleshooting experience on one or more platforms
- Experience with Mission Systems Hardware on one or more Avionics platforms

Desired skills
- Excellent interpersonal and communication skills
- Demonstrated writing skills (specifications, reports, etc)
- Knowledge of/experience with Avionics processors
- Experience with Mission Systems capabilities and implementation
- Knowledge of/experience with Ethernet® interface
- Subcontract management (Statement of Work preparation, design reviews, risks definition and tracking)

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11667
Job Location: Palmdale, CA
Rate: $75.00 - $86.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation within the last 5 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Maintaining, developing and/or supporting test equipment hardware and/or software.
2. Experience with System Security Engineering (SSE) principals.
3. Experience with NIST SP 800-53 Security Controls.
4. Security Verification/Pen testing

Desired skills
1. Design experience through the DoD systems development life-cycle developing embedded security solutions.
2. Extensive Experience developing DoD National Security Systems (NSS).
3. Knowledge and expertise with Routing and Switching platforms.
4. Demonstrates both tactical as well as strategic thinking and creative problem solving.
5. Strong knowledge of VPN methods such as IPSEC, GRE and SSL.
6. Experience in management of the LAN and WAN, including supporting router, switch and security devices.
7. Experience with IP and Networking Theory.
8. Knowledge of Network Architecture, current and future topology.
9. Experience in preparation of Statements of Work (SOW) for Cyber Related changes

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11668
Job Location: Palmdale, CA
Rate: $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
2. Mission systems, avionics, or system test experience.

Desired skills
1. Strong oral, written, and interpersonal communication skills.
2. Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
3. Able to work overtime and multitask.
4. Familiarity with aircraft vehicle systems or mission system architecture.
5. Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
6. Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11619
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Basic Qualifications:
1. Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
2. System test, design, or development experience

Desired skills
1. Strong oral, written, and interpersonal communication skills.
2. Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
3. Able to work overtime and multitask.
4. Familiarity with aircraft vehicle systems or mission system architecture.
5. Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
6. Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11581
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications
1. Experience with Mission Systems Integration and Test
2. Experience working with Test Plans

Desired skills
1. Mission Systems Flight Test Execution
2. Flight Test Conduction/Direction
3. Operations Analysis or other experience working closely with operators on the use of tactical systems
4. Experience with requirements development, integration and test processes, and strong lab skills
5. Crew Resource Management (CRM) experience a plus
6. A working knowledge of software development, avionics, IT/Infrastructure, systems engineering, or aviation could all prove useful in the collaboration with surrounding disciplines
7. Experience with Simulation/Scenario development using AFSIM
8. Experience aboard Flying Test Beds considered a plus
9. Experience with Pilot-in-the-Loop Simulation/Experimentation
10. Some level of understanding of Linux with the ability/willingness for on-the-job growth in experience
11. Experience with automation of system test procedures.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11614
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation within the last 5 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications
1. Experience with test and or integration of hardware and software.
2. Bachelor's or above in a Technical Engineering Discipline
3. Final Secret Security Clearance to start

Desired skills
1. Avionics experience
2. Experience with requirements development and integration and test processes
3. Laboratory skills, flight test experience
4. Experience with test procedures and reports
5. Experience working in a Systems Integration Lab
6. Experience with ISR programs, specifically U-2 program

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11597
Job Location: Palmdale, CA
Rate: $75.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret is acceptable****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Basic Qualifications:
1. Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
2. Experience in systems engineering.
3. Experience with system design.

Desired skills
1. Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
2. Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
3. Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
4. Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
5. Highly motivated, energetic self-starter.
6. Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
7. Experience with Microsoft Office products

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11580
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
2. Experience in systems engineering.
3. Experience with system design.

Desired skills:
1. Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
2. Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
3. Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
4. Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
5. Highly motivated, energetic self-starter.
6. Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
7. Experience with Microsoft Office products

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11618
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelor’s degree in Aeronautical Engineering, Electrical Engineering, Math, Computer Science, related Engineering degree considered
2. System Level Design Experience
3. Background using ethernet protocols

Desired skills
1. Preference will be given to candidates with experience in one or more of the following skill domains: TACAN, IFF, Link 16 and/or Open Systems Architecture
2. Familiarity with Systems Engineering processes to include requirements development and verification, systems architecture, and conceptual design theories
3. “Internet of Things” applications
4. Working knowledge of aircraft avionics
5. Team Player
6. Good Communication Skills
7. MS Office Suite Proficiency

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11621
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Pilot or Weapons Systems Operator (WSO) with a minimum of 1,000 hours in fighter aircraft (F-16, F-22, or F-35)
2. Deployed within the last 5 years
3. Operational fighter jet experience
4. Leadership/SME experience

Desired skills
1. Solid speaking and writing skills are a must due to frequent and sustained communication with a myriad of contractors and governmental organizations at multiple levels.
2. Instructor Pilot or Instructor WSO
3. Mix of air-to-air and air-to-ground experience
4. Familiarity with operational test (OT), design test (DT), or weapons evaluations
5. Experience/education in Human Systems Integration
6. Human Factors experience
7. USAFWS Fighter WIC Graduate or Navy Top Gun Graduate

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11622
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with an investigation within the last 5 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
2. Experience in Command and Control (C2) Communications
3. Background in Tactical Communications
4. Requirements Management experience
5. Demonstrated understanding of network data interfaces
6. Test and verification experience
 
Job Number: 11234
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Bachelors or above degree in engineering/technical discipline
2. Experience with electrical hardware design and setup
3. Experience with lab development

Desired skills:
1. Experience with hardware and software integration
2. Experience with development of test plans
3. Experience with sub-system integration
4. Experience with test procedure development
5. Experience with avionics and software
6. Experience with requirements development and integration and test processes
7. Software development or software scripting skills (C++, Java, JavaScript, or Python)
8. Active Top Secret Clearance

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11615
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.
2. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal.
3. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.
4. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Basic Qualifications:
1. Experience with RF subsystems (Electronic Warfare ‘EW’, RADAR, Communications, or Datalinks).
2. Experience with requirements development, decomposition, or verification.

Desired Skills:
1. Working knowledge of Radio Frequency (RF) principles and techniques.
2. Experience with supply chain management and supplier technical coordination.
3. Project leadership experience.
4. Experience with RF system Design & Development.
5. Experience with RF subsystem Integration & Test.
6. Fighter aircraft subsystem development experience with an emphasis on RF sensor technologies.
7. Experience with defining system architecture.
8. Comfortable working in a fast-paced (dynamic) environment without appreciable supervision.
9. Experience with Cost Account Management (CAM).
10. Strong communication skills.
11. Proficiency with Word, Excel and PowerPoint; experience with MS Project.
12. Master's Degree.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YR
 
Job Number: 11620
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Aircraft Engine Installation

Description:
Experience:
• Must have system level engineering experience on engine installations. Turbo Prop install experience is preferable, but not mandatory.
• Must have a BS degree (BSAE, BSME)
• System testing required for PDR.
• Experience with layout and detail design of engine installation into aircraft for PDR.
• Spec out system parts.
• Coordinate/support manufacturing
• Select and manage suppliers
• Some experience with CAD software like Catia V5, UG NX, etc.
• Experience doing thermal analysis of engine installations.
• US Citizen highly preferred. Greencard could work, but much more difficult to place on program.
• Someone who has been a Project Engineer at UTAS/Collins Aerospace on an engine program would be perfect.







The Structures Company is an AA/EOE.
 
Job Number: 333
Job Location: Manassas, VA
Rate: $80/Hr. **DOE**
Per Diem: Yes
Duration: 9-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
166740 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2435-1
Max Pay Rate: $98.00/hr
Start Date: 10/31/2019
End Date: 1/31/2021
Position Type: Contract

Job Summary:
We are looking for an experienced Systems Engineer familiar with all aspects and disciplines within the system engineering process. This includes requirements definition, implementation and integration and verification, risk management and project planning.

The ideal candidate will also have specific experience in the area of Systems Architecture, working with functional block diagrams, ICD's and the DoDAF standard at a system level. The candidate will support systems architecture development on a program in concert with other subject matter experts and program management. Good interpersonal skills are a must, as well as experience with a variety of systems engineering tools such as DOORS, Rhapsody, Teamcenter, etc.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelors or above degree in a technical discipline
Experience with the Systems Engineering Process
Background in Systems Architecture
Rhapsody and DOORS experience
Familiarity with DoDAF
Strong interpersonal skills

Skills: Category Name Required Importance Experience
Software Skills DOORS No 1
Technical Skills Requirements Development No 1

Qty 1 position
 
Job Number: JE-2435-1TS
Job Location: Palmdale, CA
Rate: 98/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
166739 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2419-1
Max Pay Rate: $98.00/hr
Start Date: 10/30/2019
End Date: 1/30/2021
Position Type: Contract


Job Summary:
The successful candidate will be responsible as a senior member of the Integrated Product Support (IPS) IPT in a highly classified program and will be responsible for managing the development and implementation of training plans, training material and courseware, to include multi-media, simulation and scenarios used for customer training.

The selected candidate will be responsible for developing highly creative training material for existing and new systems. The ideal candidate will provide stand-up training to the customer personnel at various locations.
The successful candidate must have excellent creative capabilities in designing and creating technology-based multimedia applications applying both innovative concept and methodologies and technical skills, using multiple media tools. May involve audio, digital animation, text, graphics, visual capture, Virtual Reality (VR), Augmented Reality (AR), photo and video and more for applications including web, mobile and simulation.
Researches latest trends on graphic design, software and development techniques. Must be able to interpret technical orders, illustrated parts manuals and technical drawings and schematic diagrams. Up to 20% travel is required.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelors degree from an accredited college in a related discipline, or equivalent experience
Desired skills
Experience in effectively leading and managing teams and small groups
Experience with implementing training syllabi and meeting program training development and sustainment requirements to include Formal Training Course planning and execution.
Experience with Virtual Reality and/or Augmented Reality technologies or applications.
Understanding and wide application of technical principles, theories and concepts, in photography, video, 3D modeling and animation.
Demonstrated experience using standard office software tools / solutions e.g., Microsoft Office (Word, Excel, PowerPoint, Project).

Skills: Category Name Required Importance Experience
Areas of Expertise Virtual Reality No 1
Technical Skills Effective Training Methodology No 1

Qty 1 position
 
Job Number: JE-2419-1TS
Job Location: Palmdale, CA
Rate: 98/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
166736 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2412-1
Max Pay Rate: $98.00/hr
Start Date: 10/30/2019
End Date: 1/30/2021
Position Type: Contract

Job Summary:
This position is for a senior member of an ADP Systems Engineering team, providing support across the entire product line including both new and existing programs. The candidate will be part of a fast paced, dynamic environment exploring state of the art technical solutions. The successful candidate will have extensive experience across the spectrum of systems engineering activities.

Will generate, decompose, track and verify requirements, perform risk assessments, lead trade studies, write SOWs (statement of work) and supplier specifications, perform technical planning, perform requirements verification and be involved in systems architecture development. The candidate will provide systems and subsystem integration and test support and work closely with program management to assure complete program integrity. The candidate will have experience authoring and managing Statements of Work (SOWs) and Engineering Requirements Documents (ERDs) for Subcontracts and Vendors.
The ideal candidate will have a practical understanding of Earned Value Measurement Systems (EVMS), aspires to be a technical leader and is a veteran in systems engineering, prepared to run portions of the effort and think creatively and individually, and a working knowledge of Requirements and Verification Traceability tools is extremely helpful in establishing verification methods.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor Or Above Technical Degree in a Technical Discipline
SAR/SAP clearance
Experience leading systems engineering activities
Experience with requirements generation and decomposition
Experience using software tools (such as MS Excel and Access)
Experience with tracking requirements using the DOORS database tool
Experience with systems engineering process
Ability to work with different engineering disciplines to derive and decompose requirements
Experience developing a system architecture (or familiarity with Department of Defense Architecture Framework (DoDAF))
Good written and verbal communication with experience in writing requirements
Work experience with operational modeling tools
Previous integration and test experience
Control Account Manager (CAM) experience; CAM-Certification a plus.

Skills: Category Name Required Importance Experience
Areas of Expertise Risk Management No 1
Software Skills DOORS No 1

Qty 1 position
 
Job Number: JE-2412-1S6
Job Location: Palmdale, CA
Rate: 98/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
166737
Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2413-1
Max Pay Rate: $98.00/hr
Start Date: 10/30/2019
End Date: 1/30/2021
Position Type: Contract

Job Summary:
This position is for a senior member of an ADP Systems Engineering team, providing support across the entire product line including both modernization and existing programs. The candidate will be part of a fast paced, dynamic environment exploring state of the art technical solutions.
The successful candidate will be responsible for the integration and test of Mission Systems capabilities and functions in a laboratory and flight test environment.

Utilizing mission systems requirements, the candidate will lead the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality which support flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.

The ideal candidate will have a practical understanding of Earned Value Measurement Systems (EVMS), aspires to be a technical leader and is well-versed in systems engineering, prepared to run significant elements within the effort and think creatively and individually. A working knowledge of Requirements and Verification Traceability tools establishing verification methods is considered an imperative.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Experience leading systems engineering activities across organizations or suppliers
Experience with requirements generation and decomposition
Experience using software tools (such as MS Excel and Access)
Experience with tracking requirements using the DOORS database tool
Experience with systems engineering process
Experience with operation of flight hardware and test equipment in a lab environment
Experience with hardware configuration management
Experience reading Engineering Drawings and Parts List
Ability to work with different suppliers and engineering disciplines to derive and decompose requirements
Experience developing a system architecture (or familiarity with Department of Defense Architecture Framework (DoDAF))
Good written and verbal communication with experience in writing requirements
Operational work experience


Skills: Category Name Required Importance Experience
Areas of Expertise Risk Management No 1
Software Skills DOORS No 1

Qty 1 position
 
Job Number: JE-2413-1TS6
Job Location: Palmdale, CA
Rate: 98/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
166524 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2141-1
Max Pay Rate: $86.00/hr
Start Date: 10/11/2019
End Date: 1/11/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in an Engineering or Technical Discipline
- Avionics design, integration and troubleshooting experience on one or more platforms
- Experience with Mission Systems Hardware on one or more Avionics platforms
Desired skills
- Excellent interpersonal and communication skills
- Demonstrated writing skills (specifications, reports, etc)
- Knowledge of/experience with Avionics processors
- Experience with Mission Systems capabilities and implementation
- Knowledge of/experience with Ethernet® interface
- Subcontract management (Statement of Work preparation, design reviews, risks definition and tracking)

Qty 2 positions
 
Job Number: JE-2141-1S5
Job Location: Palmdale, CA
Rate: 86/hr max
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
166526
Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2140-1
Max Pay Rate: $86.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
1. SIGINT systems applications across the frequency spectrum
2. Either SIGINT HIGH or LOW systems (legacy or planned) to include command & control, collection, mission processing, or dissemination
Desired skills
i. Provide technical support to customer activities and programmatic processes
ii. Develop documents and briefings to communicate work or study status, brief Program Management as required
iii. Provide task-based schedule and resource forecasts
iv. Subcontract management experience
v. Develop Concept of Operations (CONOPS) for new capabilities and coordinate them across the affected organizations
vi. Assist in the development of system level, functional level and interface requirements
vii. Identify gaps between requirements and acquisition program capabilities being conducted by the customer
viii. Manage the Request for Change (RFC) process as it relates to closing requirement gaps
ix. Update related design documentation

Qty 1 position
 
Job Number: JE-2140-1TS5
Job Location: Palmdale, CA
Rate: 86/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance CA

Description:
166459
Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2124-1
Max Pay Rate: $65.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
• Experience with test and or integration of hardware and software.
• Bachelor's or above in a Technical Engineering Discipline

Desired skills
• Avionics experience
• Experience with requirements development and integration and test processes
• Laboratory skills, flight test experience
• Experience with test procedures and reports
• Experience working in a Systems Integration Lab
• Experience with ISR programs, specifically U-2 program


Qty 1 position
 
Job Number: JE-2124-1S5
Job Location: Palmdale, CA
Rate: 65/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166414 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2143-1
Max Pay Rate: $70.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
• Experience with Mission Systems Integration and Test
• Experience working with Test Plans

Desired skills
• Mission Systems Flight Test Execution
• Flight Test Conduction/Direction
• Operations Analysis or other experience working closely with operators on the use of tactical systems
• Experience with requirements development, integration and test processes, and strong lab skills
• Crew Resource Management (CRM) experience a plus
• A working knowledge of software development, avionics, IT/Infrastructure, systems engineering, or aviation could all prove useful in the collaboration with surrounding disciplines
• Experience with Simulation/Scenario development using AFSIM
• Experience aboard Flying Test Beds considered a plus
• Experience with Pilot-in-the-Loop Simulation/Experimentation
• Some level of understanding of Linux with the ability/willingness for on-the-job growth in experience
• Experience with automation of system test procedures

Qty 1 position
 
Job Number: JE-2143-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer TX

Description:
166703 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2455-1
Max Pay Rate: $70.00/hr
Start Date: 11/4/2019
End Date: 2/2/2021
Position Type: Contract


Job Summary:
Seeking Systems Engineering Generalist to perform Technical Management activities. Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
- Bachelor’s degree in an Engineering field
- Experience working in Aerospace programs
- DoD or USG Systems Engineering experience



Qty 1 position
 
Job Number: JE-2455-1ATO
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166451 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2139-1
Max Pay Rate: $70.00/hr
Start Date: 10/11/2019
End Date: 1/11/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
- Pilot or Weapons Systems Operator (WSO) with a minimum of 1,000 hours in fighter aircraft (F-16, F-22, or F-35)
- Deployed within the last 5 years
- Operational fighter jet experience
- Leadership/SME experience
Solid speaking and writing skills are a must due to frequent and sustained communication with a myriad of contractors and governmental organizations at multiple levels.
Instructor Pilot or Instructor WSO
Mix of air-to-air and air-to-ground experience
Familiarity with operational test (OT), design test (DT), or weapons evaluations
Experience/education in Human Systems Integration
Human Factors experience
USAFWS Fighter WIC Graduate or Navy Top Gun Graduate

Qty 1 position
 
Job Number: JE-2139-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166432 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2145-1
Max Pay Rate: $70.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
Experience in systems engineering.
Experience with system design.

Desired skills
Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
Highly motivated, energetic self-starter.
Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
Experience with Microsoft Office products

Qty 1 position
 
Job Number: JE-2145-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer - Clearance TX

Description:
166144 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2002-1
Max Pay Rate: $65.92/hr
Start Date: 9/13/2019
End Date: 12/12/2020
Position Type: Contract

Job Summary:
This position is part of the Systems Engineering organization. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.

Job Description:
Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
• Experience in DMSMS in the Aerospace Industry
• Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
• Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
• Experience working with Suppliers and/or Supply Chain engagement.
• Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
• Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
• Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Areas of Expertise Materials No 1
Areas of Expertise Supply Chain No 1
Technical Skills Data Management No 1

Qty 1 position needed
 
Job Number: JE-2001-1S5
Job Location: Fort Worth, TX
Rate: 65.92/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / obsolescence SAP DMS - no clearance GA

Description:
166800
Job Title: Systems Engineer

Work Site Address: Marietta, GA 30063
Job Number: 2500-1
Max Pay Rate: $71.00/hr
Start Date: 11/5/2019
End Date: 2/3/2021
Position Type: Contract


Job Summary:
As part of the AMMM Diminishing Manufacturing Sources (DMS) Management Team, employee will manage the 'Watch Items' that have the potential to become obsolete.

Responsibilities:
o Review Supplier SDRLs 033 and 035 for technical content and to determine if additional actions need to be taken to prevent a parts
o Work with suppliers to discuss resolution options, request formal supplier notifications, determine DMS effectivity, request LTB quotes, determine last time buy (LTB) LRU PO cut in, resolve inventory pricing and usage, etc
o Work with components engineering to help identify possible alternate components and verify parts obsolescence
o Work with engineering for Class II determination
o Provide status updates to USG
o Provide inventory reports on USG owned components
o Work with sustainment and program management to determine accurate parts usage forecast for a LTB
o Create CBA’s to take to cost council to request FEAs
o Verify components are added to material masters in SAP and properly linked as subrequirements to higher level assemblies (LRUs)
o Monitor the actuals remaining on FEA and ensure proper liquidation

Additional responsibilities could include managing the projects for LRU's that have been identified on the DMS list.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor’s Degree in Electrical Engineering, Systems Engineering, or technically related discipline.
Desired skills
•Understanding of the DMS process
•Systems engineering background; ability to effectively manage the full development life cycle
•Experience briefing executive leadership
• Experience working parts obsolescence projects
• Experience with liquidating FEAs
• Experience with analyzing parts in SAP
• Experience coordinating with Supply Chain Management (SCM)
• SAP Experience
• Experience with EDSC
• Supplier part management

Skills: Category Name Required Importance Experience
Software Skills SAP No 1

Qty 1 position
 
Job Number: JE-2500-1
Job Location: Marietta, GA
Rate: 71/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / “Internet of Things” applications System Architecture - Clearance TX

Description:
166449 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2138-1
Max Pay Rate: $70.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
• Bachelor’s degree in Aeronautical Engineering, Electrical Engineering, Math, Computer Science, related Engineering degree considered
• System Level Design Experience
• Background using ethernet protocols

Desired skills
• Preference will be given to candidates with experience in one or more of the following skill domains: TACAN, IFF, Link 16 and/or Open Systems Architecture
• Familiarity with Systems Engineering processes to include requirements development and verification, systems architecture, and conceptual design theories
• “Internet of Things” applications
• Working knowledge of aircraft avionics
• Team Player
• Good Communication Skills
• MS Office Suite Proficiency

Qty 1 position
 
Job Number: JE-2138-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / DOORS - Clearance CA

Description:
166726 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2405-1
Max Pay Rate: $98.00/hr
Start Date: 10/30/2019
End Date: 1/30/2021
Position Type: Contract

Job Summary:
This position is for a senior member of an ADP Systems Engineering team, providing support across the entire product line including both new and existing programs. The candidate will be part of a fast paced, dynamic environment exploring state of the art technical solutions. The successful candidate will have extensive experience across the spectrum of systems engineering activities.

Will generate, decompose, track and verify requirements, perform risk assessments, lead trade studies, write SOWs (statement of work) and supplier specifications, perform technical planning, perform requirements verification and be involved in systems architecture development. The candidate will provide systems and subsystem integration and test support and work closely with program management to assure complete program integrity. The candidate will have experience authoring and managing Statements of Work (SOWs) and Engineering Requirements Documents (ERDs) for Subcontracts and Vendors.

The ideal candidate will have a practical understanding of Earned Value Measurement Systems (EVMS), aspires to be a technical leader and is a veteran in systems engineering, prepared to run portions of the effort and think creatively and individually, and a working knowledge of Requirements and Verification Traceability tools is extremely helpful in establishing verification methods.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor Or Above Technical Degree in a Technical Discipline
Experience leading systems engineering activities
Experience with requirements generation and decomposition
Experience using software tools (such as MS Excel and Access)
Experience with tracking requirements using the DOORS database tool
Experience with systems engineering process
Ability to work with different engineering disciplines to derive and decompose requirements
Experience developing a system architecture (or familiarity with Department of Defense Architecture Framework (DoDAF))
Good written and verbal communication with experience in writing requirements
Work experience with operational modeling tools
Previous integration and test experience
Control Account Manager (CAM) experience; CAM-Certification a plus.

Skills: Category Name Required Importance Experience
Areas of Expertise Risk Management No 1
Software Skills DOORS No 1

Qty 1 position
 
Job Number: JE-2405-1S6
Job Location: Palmdale, CA
Rate: 98/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / F-35 - Clearance TX

Description:
166434 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2144-1
Max Pay Rate: $70.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
Mission systems, avionics, or system test experience.

Desired skills
Strong oral, written, and interpersonal communication skills.
Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
Able to work overtime and multitask.
Familiarity with aircraft vehicle systems or mission system architecture.
Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Adobe FrameMaker No 1
Software Skills UNIX No 1

Qty 3 positions
 
Job Number: JE-2144-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / F-35 DOORS Rhapsody UML Framemaker - Clearance TX

Description:
166407 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2073-1
Max Pay Rate: $70.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
Bachelor's degree in electrical engineering, systems engineering, aeronautical engineering, computer engineering or related technical degree.
Experience in systems engineering.
Experience with system design.

Desired skills
Knowledge of tactical fighter aircraft design and operations is preferred and knowledge of F-35 specifically would be beneficial.
Familiarity with object-oriented concepts and the use of the Unified Modeling Language (UML) are desired.
Knowledge of the F-35 design toolset, including DOORs, Rhapsody, Framemaker, Dimensions, and SIMS would be beneficial.
Demonstrate the ability to analyze complex technical problems, present findings/recommendations and implement solutions.
Highly motivated, energetic self-starter.
Possess exceptional written and verbal communication skills and demonstrate versatility and desire to be a contributor in all phases and aspects of product development.
Experience with Microsoft Office products

Skills: Category Name Required Importance Experience
Software Skills Adobe FrameMaker No 1
Software Skills DOORS No 1
Software Skills Unified Modeling Language (UML) - Intermediate No 1

Qty 1 position needed
 
Job Number: JE-2073-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / Mission Systems Integration and Test - Clearance TX

Description:
166460 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2079-1
Max Pay Rate: $70.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Job Description:
Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+0-3 YRS
Active secret required
Basic Qualifications
Bachelor’s degree from an accredited college in electrical engineering, computer engineering or software engineering or related technical field.
System test, design, or development experience
Desired skills
Strong oral, written, and interpersonal communication skills.
Working knowledge of MS Office, Adobe Framemaker and Unix based platform environments.
Able to work overtime and multitask.
Familiarity with aircraft vehicle systems or mission system architecture.
Highly motivated individual with the ability to continually learn and expand F35 system knowledge in a fast pace environment.
Ability to work well with team members across multiple organizations, and possess strong oral and written communication skills.

Skills: Category Name Required Importance Experience
Software Skills Adobe FrameMaker No 1
Software Skills UNIX No 1

Qty 1 position
 
Job Number: JE-2079-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer / RF systems integration test radar EW Communications Radio Frequency - Clearance TX

Description:
166448 Job Title: Systems Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2081-1
Max Pay Rate: $70.00/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems.

Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Master's Degree.
Experience with RF subsystems (Electronic Warfare ‘EW’, RADAR, Communications, or Datalinks).
Experience with requirements development, decomposition, or verification.
Working knowledge of Radio Frequency (RF) principles and techniques.
Experience with supply chain management and supplier technical coordination.
Project leadership experience.
Experience with RF system Design & Development.
Experience with RF subsystem Integration & Test.
Fighter aircraft subsystem development experience with an emphasis on RF sensor technologies.
Experience with defining system architecture.
Comfortable working in a fast-paced (dynamic) environment without appreciable supervision.
Experience with Cost Account Management (CAM).
Strong communication skills.
Proficiency with Word, Excel and PowerPoint; experience with MS Project.

Qty 1 position
 
Job Number: JE-2081-1S5
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer FL

Description:
Job Title: Systems Engineer

Work Site Address: Orlando, FL 32819
Job Number: 2723-1
Max Pay Rate: $63.00/hr
Start Date: 12/2/2019
End Date: 5/31/2020
Position Type: Contract

Job Summary:
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints.

Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
* Work in a cross-functional DevOps team to define the System and Subsystem requirements necessary for the design, implementation, and evolution of Lockheed Martin training products using a Model-based approach
* Support software implementation through requirement and model interpretation and maintenance
* Provide timely and accurate status to stakeholders including Product Owners and members of the Systems Engineering Integration Team (SEIT)
* Help maintain customer confidence by communicating effectively, performing with integrity, demonstrating technical competence
* Support product capability demonstrations

Qualifications and Education Requirements
BS+0-3 YRS
BASIC QUALIFICATIONS:
* 0-3 years of Systems Engineering experience in the training and simulation domain
* Strong understanding of Joint, Live, Virtual & Constructive (JLVC) training systems architecture, subsystem designs, requirements management approaches
* Experience with Model Based System Engineering (MBSE) methodologies and tools
* Experience with System and Subsystem requirement decomposition, derivation and allocation
* Experience integrating and verifying HW/SW Systems
* Willing to travel internationally, as required (20-30% travel support expected)
* Willing to work alternate shift, as required (some collaborative efforts will require 2nd shift support)

DESIRED SKILLS:
Experience in the following areas:
* Distributed simulation to support collective training
* Simulation applications such as WARSIM, JSAF, EPIC, P3D, Titan Vanguard

Familiarity with the following:
* Real-time platform wargaming IEEE standards such as High-Level Architecture (HLA) and Distributed Interactive Simulation (DIS)
* Military tactical data link networks such as LINK11 and/or LINK16
* Simulation interoperability architecture such as Test and Training Enabling Architecture (TENA)
* Simulated terrain and entity model generation tools and processes
* Virtual infrastructure and deployment

Skills: Category Name Required Importance Experience
Areas of Expertise Doors No 1
Areas of Expertise Modeling No 1
Areas of Expertise Software No 1
Areas of Expertise Testing No 1
Areas of Expertise Validation No 1
Technical Skills Integration No 1
Technical Skills Requirements Development No 1
Technical Skills Simulation No 1
Technical Skills Specifications No 1

Qty 4 positions
 
Job Number: JE-2723-1ATO
Job Location: Orlando, FL
Rate: 63/hr max
Per Diem: pd split possible
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration / Test Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****Active Secret Clearance or to have had one within the last 2 years highly desired****

Job Description:
1. Our Client, SOF GLSS (Special Operations Forces Global Logistics Support Services) is seeking a Systems Integration and Test Engineer for Fixed Winged platforms - primarily variants of the C-130 - in support of our Special Operations Forces Support Activity (SOFSA) program in Fort Walton Beach, FL.
2. This program is critical to the success of US service men and women deployed throughout the world.
3. Our mission is to rapidly and properly equip the SOF community and its war fighters with the best possible systems and equipment anywhere in the world.

Primary job responsibilities include the following:
1. Plans, implements, tests, documents, and maintains solutions for the integration and testing of in-house developed and COTS/GOTS components, elements, subsystems and/or systems.
2. Synthesizes customer contractual needs and requirements into system test solutions that acknowledge technical, schedule and cost constraints.
3. Establishes functional and technical specifications and standards, solves hardware/software interface problems, defines input/output parameters, and ensures integration of the entire system or subsystem.
4. Reviews, evaluates and derives requirements for testability, develops and directs preparation and execution of comprehensive test plans, procedures and schedules for complete systems and/or subsystems.
5. Coordinates subsystem and/or system testing activities with programs and other organizations.
6. Performs analysis of test results and prepares comprehensive subsystem and/or system level evaluation reports which verify and validate system performance.
7. Writes discrepancy reports and performs integration regression testing to verify/validate incorporated fixes to software, components, subsystems and systems.

Education:
1. Level 2: BS+3-5 YRS or MS+0-3 YRS
2. Systems experience required.
3. Testing and Development experience required.
4. Develop/execute test plans experience required.
5. Validation Test Plans experience required.
 
Job Number: 11896
Job Location: Fort Walton Beach, FL
Rate: $50.00 - $64.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 5 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Integration Testing

Description:
Nesco Resource has an immediate opening for a systems integration testing specialist on a long term contracting assignment in Richardson, TX. Expected minimum duration of 12-months. The successful candidate will ensure the end to-end functionality, usability, deployment and execution of company products and services. This is a business-critical role and will report directly to Director, System Engineering.



 Due to our client’s post-business consolidations the position will require:

-Software testing to ensure proper integration of various systems and interfaces.  

-Debug interactions between multiple applications and OS’s in production

-Act as a liaison between R&D and other internal organizations

-Document requirements of inter-company customers

-Clearly communicate to a non-technical audience

-Review technical and user documentation for accuracy

-Prepare relevant technical material for end-user disclosures



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-45921
Job Location: Richardson, TX
Rate: 75.0USD/Hour
Per Diem: --
Overtime: --
Start Date: 2019-11-25 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Nico Spirito
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Safety Engineer

Description:
****MUST be a U.S. Citizen****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years. Interim Secret would be accepted****

Job Description:
1. System safety engineer for the F-35 Joint Strike Fighter program.
2. Responsibilities include safety hazard identification for designs and changes to the Air System, hazard analysis, hazard mitigation including assignment of safety requirements to subsystem/components, and oversight through hazard control verification.
3. Perform contractual efforts for the system safety team to meet deadlines with high technical quality.
4. Coordinate and collaborate with internal safety team, product development teams, and customer entities.

Requirements:
1. Previous experience as a system safety engineer or software safety engineer
2. Good communication skills
3. F-35 aircraft design knowledge
4. Pilot certification
5. Functional Hazard Analysis
6. Weibull analysis
7. Statistics
8. MIL-STD-882
9. DO-178
10. DO-254

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11414
Job Location: Fort Worth, TX
Rate: $65.44/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer (Special Projects) CA

Description:
167296 / 26938
Title TEMP Software Developer (Special Projects)

Experience Level Entry-Level (0-2 years)
City San Diego
State California

Travel Percentage Required 0% - 25%
Clearance Required? Desired
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365


Job Summary
Client is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

This position is responsible for developing software for the Remotely Piloted Aircraft systems. This system consists of ground based workstations that function as pilot and crew interface to the aircraft as well as the airborne software that controls all aircraft functions and subsystems.

Duties and Responsibilities:
Design and development for the ground control station includes graphical displays, data acquisition, user interface development, communications, human factors, and networking applications. Aircraft applications are written for minimal operating system platforms to control subsystems such as control surface servos, power plant, fuel system, navigation, communications, and weapons delivery.

Determine user requirements and specifications and plan for software development within the broader organizational scope. Software development includes end-user, system level, and data management applications.
Code maintenance including debugging and updating to keep pace with the evolving environment.

Assist in planning for future applications based on new developments in computer technology.

Communicate with the software developer group, with users, and with management as well as with the wider community.
Maintain the strict confidentiality of sensitive information.
Perform other duties as assigned.

Qualifications
Essential Qualifications Typically requires a bachelors degree in computer science, information systems or related discipline. May substitute equivalent experience in lieu of education. Must have a basic understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply basic use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a limited internal audience. The ability to work both independently and on a team is essential. Able to work extended hours as required.

Additional Qualifications
Requires a bachelors degree in computer science, information systems or related discipline.

Must have the ability to interface with customers and work effectively in a team environment.

Desired technical skills;
C & C++
Computer Vision
IP Networking
Linux
Python
Synchronous serial
Video
VxWorks
X/Motif
 
Job Number: JE-26938ATO
Job Location: San Diego, CA
Rate: DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor & Writer 1 CA

Description:
Technical Editor & Writer 1 (Job Number: 19031738)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Nov 18, 2019

Target End Date: Nov 17, 2020

Pay rate: $30.00

Work schedule: 9/80



Writes and updates Operation and Maintenance (O&M) technical procedures such as removal/installation, adjust, and inspections of unit level components to communicate clearly and effectively technical specifications and maintenance instructions to field maintenance personnel. Performs technical source data research by referring to engineering technical specifications, engineering blueprints and engineering drawings. Prepares and submits technical illustration requests by selecting engineering drawings, sketches, diagrams and charts. Candidate must possess basic understanding and application of Technical Publications principles, concepts, practices, and standards and independently demonstrate the skill and ability to perform fairly complex technical writing tasks.

Basic Qualifications:

Bachelor's Degree in Literature or Bachelor's Degree in English Creative Writing or Bachelor's Degree in English Communications and general or basic knowledge of application of Technical Writing principles, concepts, practices, and standards.

Preferred Qualifications:

In addition to a Bachelor's Degree, a Technical Writing Certification along with familiarity with PTC Arbortext Editor Software.
 
Job Number: JK-1813ATO
Job Location: Redondo Beach, CA
Rate: 30/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Editor and Writer CA

Description:
Technical Editor and Writer (Job Number: 19028799)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Nov 4, 2019

Target End Date: Oct 2, 2020

Pay rate: $40.00 - $45.00
Number of openings: 1
Assignment Duration: Up to 1 year
Location: Rancho Bernardo
Work schedule: 9/80


As a Technical Editor and Writer, you will be responsible to write, rewrite and/or edit technical documents such as technical procedure manuals, user manuals, programming manuals, service manuals, operational specifications, and related technical publications.
You will develop material that communicates clearly and effectively the technical specifications and instructions to a wide range of audiences to include military personnel.

- This position requires the initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals.
- This position will also require the active participation in overseeing the preparation of illustrative materials, to include the selection of drawings, sketches, diagrams and charts.


Basic Qualifications:

- 6 Years with Bachelors; 4 Years with Masters.
- Previous IETM authoring and development experience.
- Possess knowledge of S1000D, SGML or XML authoring software, common source databases, technical publications development processes, and Quality Assurance (QA) methods.


Preferred Qualifications:

Possess a familiarity with aircraft systems and the USAF Technical Order guidelines.
 
Job Number: JK-1808ATO
Job Location: San Diego, CA
Rate: 45/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer

Description:
Lockheed Martin Aeronautics – Greenville Operations, SC has need for a Technical Publications Writer to create C-130 aircraft Technical Publications for an on-going program to develop and author technical publications for complex military aeronautics systems. The individual will be responsible to develop military aeronautics technical publications that will include flight manuals, flight crew checklists, maintenance manuals, wiring diagram manuals, and illustrated parts breakdown manuals, as well as maintenance Job Guides utilizing technical procedure manuals, user manuals, programming manuals, operational specifications, and related product technical publications to communicate clearly and effectively technical specifications and instructions to a wide range of audiences. Oversees preparation and conducts quality review of materials and compiles quality metrics to assess performance. Ability to communicate effectively with Engineering, Production, and Logistics disciplines leading to successfully develop technical publications. Familiar with interpretation of Engineering drawings and models and be able to convey into instruction utilizing illustrative materials, selecting 3D Models, drawings, sketches, diagrams, trade journals and charts. The job entails working under general supervision, develop and field technically accurate and compliant technical documentation for upgraded aircraft avionics systems.
Basic Qualifications:
Five (5) years’ experience as a Technical Writer on programs and contracts of similar scope, type, and complexity related to C-130’s is required. Bachelor’s degree in a technical discipline from an accredited college or university is required or Eight (8) years of Technical Writer experience may be substituted for a bachelor’s degree dependent on experience.
Highly skilled in all MS Office Products Software (i.e. Word, Excel, Publisher, Power Point, Visio, etc…)
Desired Skills:
Familiar with Nuance Power PDF Software.
Familiar with technical authoring languages and specifications such as XML and SGML, in S1000D.
Having skills to assist as a Technical Illustrator working with Coral Draw.
 
Job Location: Greenville, SC
Rate: 37/hr
Per Diem: Split
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: Sanjay Khatri
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer - no clearance SC

Description:
166944
Job Title: Technical Writer

Work Site Address: Greenville, SC 29605
Job Number: 2755-1
Max Pay Rate: $38.00/hr
Start Date: 12/2/2019
End Date: 10/30/2020
Position Type: Contract

Job Summary:
Technical Publications Writer to create C-130 aircraft Technical Publications for an on-going program to develop and author technical publications for complex military aeronautics systems.

The individual will be responsible to develop military aeronautics technical publications that will include flight manuals, flight crew checklists, maintenance manuals, wiring diagram manuals, and illustrated parts breakdown manuals, as well as maintenance Job Guides utilizing technical procedure manuals, user manuals, programming manuals, operational specifications, and related product technical publications to communicate clearly and effectively technical specifications and instructions to a wide range of audiences. Oversees preparation and conducts quality review of materials and compiles quality metrics to assess performance. Ability to communicate effectively with Engineering, Production, and Logistics disciplines leading to successfully develop technical publications. Familiar with interpretation of Engineering drawings and models and be able to convey into instruction utilizing illustrative materials, selecting 3D Models, drawings, sketches, diagrams, trade journals and charts. The job entails working under general supervision, develop and field technically accurate and compliant technical documentation for upgraded aircraft avionics systems.

Five (5) years’ experience as a Technical Writer on programs and contracts of similar scope, type, and complexity related to C-130’s is required. Bachelor’s degree in a technical discipline from an accredited college or university is required or Eight (8) years of Technical Writer experience may be substituted for a bachelor’s degree dependent on experience.
Highly skilled in all MS Office Products Software (i.e. Word, Excel, Publisher, Power Point, Visio, etc…)

Desired Skills:
Familiar with Nuance Power PDF Software.
Familiar with technical authoring languages and specifications such as XML and SGML, in S1000D.
Having skills to assist as a Technical Illustrator working with Coral Draw.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 4
Software Skills MS Office - Advanced Level Yes 1
Technical Skills Ability to Read Engineering Drawings Yes 2
Technical Skills Blueprint Reading Yes 3
Technical Skills Corel Draw No 6
Technical Skills Graphic Illustration No 5

Qty 2 positions
 
Job Number: JEG-2755-1
Job Location: Greenville, SC
Rate: 38/hr max
Duration: 10 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineer 3

Description:
Test & Evaluation Engineer 3

Location: Albuquerque, NM
Duration: 9 Months

Description:
Supports the development and verification of test instrumentation and test data recording equipment. Designs test hardware, software and systems to achieve test requirements. Reviews test data, including off-nominal data, for accuracy, quality and/or fidelity prior to delivery to customer. Prepares and publishes test reports to document test results and satisfy requirements. Presents test results internally. Archives data and reports. Trains others. Works under general direction.

Education / Experience:
Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

Skill Code: 64C-Test Instrumentation

Skills:
Category Name Required Level
Areas of Expertise LabView Programming No Intermediate
Software Skills LabVIEW Programming Advanced No Advanced
 
Job Number: 19-15335
Job Location: Albuquerque, NM
Per Diem: split
Overtime: possible
Duration: 9 months
Start Date: 12/2/19
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Development Engineer

Description:
Must be a US Citizen or a Permanent Resident Alien



The Test Systems Development Engineer will be responsible for test station software development including: planning, requirements, architecture, software design and development (e.g. TestStand, LabWindows/CVI, VisualStudio), validation, verification and release. Specifically, workers that directly or indirectly support services that are invoiced to Client through one of several contractual arrangements (e.g., time/materials, statement of work, purchase agreement, direct labor).



Bachelor's Degree – preferably in Computer Engineering or Electrical engineering

5 + years of test experience in complex electronics

C, C++ & C



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 19-44835
Job Location: Grand Rapids, MI
Rate: 70.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-11-10 00:00:00.0
Start Date: 2019-11-11 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer / Catia V5 - Clearance CA

Description:
166408 Job Title: Tool Design

Work Site Address: Palmdale, CA 93599
Job Number: 2012-1
Max Pay Rate: $75.00/hr
Start Date: 9/17/2019
End Date: 9/11/2020
Position Type: Contract

Job Summary:
Determines, provides and develops technical solutions to a wide range of difficult problems unique to each program assigned, with minimum direction or supervision.

Responsible for the design, development and implementation of equipment, tools, dies, gauges, jigs, fixtures, industrial machinery, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Comprehensive understanding and wide application of engineering and technical principles, theories and concepts will be expected.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications:
- Minimum of 8-years of demonstrated professional Tool Design experience.
- MUST BE proficient in CATIA-V5 Generative Shape, Part, Assembly & Drafting workbenches.
- Proficient in the use of GD&T.
- Comprehensive knowledge and experience in aircraft tool design and fabrication, including composite lay-up and large assemblies.
- MS-Office proficient.

Desired:
- CATIA-V4 or V6 experience.
- Experience in structural analysis.
- Experience working in a fast paced, developmental environment.

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills Catia Yes 9 6 + Years

Qty 4 positions

Applicants must not have applied for Tool Design at LM- in the last 6-mo.
 
Job Number: JE-2012-1S5
Job Location: Palmdale, CA
Rate: 75/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Maker

Description:
Nesco Resource has a great opportunity for a Tool Maker to work at a premiere Manufacturer in the North Branford, CT Area. The ideal candidate will be a self starter with the ability to work well with others in a diverse environment.

 

Responsibilities: 

  • The main responsibilities of a Toolmaker are: making, repairing, and maintaining precision tools (such as jigs, molds and dies), which are then used in the manufacturing process to make products.

  • Proficiency in using the following type of equipment: CNC, milling machine, lathe, grinding wheel, etc.

  • The position interfaces with our design engineering in order to provide input as to the manufacturability of parts being designed.  

  • The candidate has to be able to work independently and be self-motivated.  Computer proficiency is required to be able to program the CNC machine and CAD software. 

  • A wide degree of creativity and latitude is expected.


 

Qualifications

Education:



This position requires a minimum of a High School Education, or GED.

Toolmaker Apprenticeship Program certified by the State of Connecticut preferred.

 

Skills & Abilities:

 

  • Ability to read and interpret internal and or customer requirements and be able to follow detailed instructions including drawings and blueprints.

  • Computer skills including CAD, MS Office and Outlook.

  • Ability to make independent decisions after review of internal and or customer requirements.

  • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.  Basic understanding of geometry and trigonometry.

  • Ability to work well as part of a team.


Experience:

 

Must have the ability to setup and operate a milling machine, grinding wheel, CNC.

 

A minimum of three (3) years related experience working to very tight tolerances +/-.0001.



Hours: Monday - Friday 7:00 am- 3:30 pm



Pay Rate: $30.50.00/hr




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-44682
Job Location: North Branford, CT
Rate: 63440.0USD/Year
Per Diem: --
Overtime: --
Duration: Direct
Start Date: 2019-10-28 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kristen Boroski
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Web Designer - Clearance NC

Description:
165222 Job Title: Web Designer

Work Site Address: Fort Bragg, NC 28303
Job Number: 1683-1
Max Pay Rate: $33.65/hr
Desired Start Date: 12/9/2019
End Date: 6/9/2020
Position Type: Contract

Interfaces between systems analysts/programmers and users located in a specialized area to ensure that information technology designs meet the needs of the end users within an organization. Documents product/service requirements and develops test procedures to ensure user requests are carried out. Requires general-logic knowledge of system capabilities without necessarily the ability to program. They perform UX audits of baseline software content, research and resolve inconsistencies in the software, maintain the release UX content documentation, conduct the execution of the UX major/minor feature changes and checklist during the software sprints, brief status to Management and Customers, provide Input to the lessons learned and best practices process for the software promotion phase, maintains the process and procedure documentation, and maintains software release metrics. Assists software, hardware, analysts, and military personnel in problem identification and resolution.

Roles and Responsibilities
Qualifications and Education Requirements
Bachelor's degree from an accredited college in a related discipline, or equivalent experience/combined education, with 6 years of professional experience; or 4 years of professional experience with a related Master's degree. Considered career, or journey, level.

Preferred Skills
Familiarity with Creator, Adobe Photoshop, and Adobe Flash
Experience with Waterfall and Agile type development programs.
Ability to model and texture 3D elements efficiently for both low and high poly applications.
Strong communication skills.
Agile Product Owner experience,
Supply Chain Management knowledge
Experience With Cloud implementation
Knowledge/experience with software UX design
Have experience with complex program planning where a multitude of resources are all contributing to the final product. Experience in software wire diagrams and environment.
 
Job Number: JE-1683-1S
Job Location: Fort Bragg, NC
Rate: 33.65/hr max
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Back to Advanced Job Search