Job Search Results

172 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/28 Thursday 09:08AM Pacific Time by ContractJobHunter. )

Listings 1 - 172

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2442 - MECHANICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mechanical engineers currently to support a number of programs across the Space Mission organization

Candidates will possess a Bachelor degree from a recognized university, in Mechanical Engineering or equivalent, and a minimum of 4 years of post graduate professional experience.

(Previous Aerospace experience and familiarity with MIL/ASME standards and ISO are a definite asset.)

Ability to interface with customers on a daily basis will be a key asset for this position.

Experience with CAD, preferably 3D is also an asset.

Must have solid oral presentation skills, as well as written communication skills.
 
Job Number: 2442
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Component Design Engineer

Description:
Keys;
-Aircraft Experience (industry experience)
-Aircraft Components
-Hydraulic or Fuel System Design experience on Aircraft's
- CAD (Solidworks desired but not absolutely required)
-FAA knowledge or Past experience (strongly desired)

Description
Looking for a product design engineer that has prior experience with aircraft components.

Responsibilities
•Provide engineering expertise to ensure that all products are designed, procured and built according to customer and company quality requirements.
•Design new products and redesign existing products to meet customer needs and specifications.
•Be involved in product concept through completion.
•Serve as project managers as assigned once acquainted with product base.
•Work on multiple projects simultaneously.
•Customer interface will be varied depending on the projects assigned.
•This engineer would be involved heavily in the testing of the product they are working on/assigned, they will need to be able to perform CAD modeling, assist with prototype creation, and write technical reports.

Requirements
Compliance with ITAR regulations requires a US Citizen or Permanent Resident.
•5 – 15 years Design and Development experience with aircraft components. Must have experience writing component specifications, or designing products to meet those specifications.
•Knowledge and experience with products that are required to meet either military standards or FAA standards.
•Self-starter and creative problem solver and solution provider. Able to work well independently or as part of a team.
•Bachelor’s degree in either Mechanical or Aerospace Engineering required with an emphasis on mechanical design preferred.
•3D CAD modeling proficiency required.
•Experience in aircraft fuel or hydraulics systems a plus
•Experience with requirements management software a plus
•Experience in SolidWorks is a plus
•Knowledge of FEA a plus
 
Job Location: St Louis, MO
Rate: $50-$60/HR DOE
Per Diem: Yes, Split
Overtime: Possible
Duration: 6-12 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CONTRACT GROUP
Attention: Derek Doucette
Address: 50 HIGH ST STE 46
City, State: NORTH ANDOVER, MA 01845
Phone: 978/984-5581
800 Phone: 877/723-9087
Fax Phone: 978/208-8246
Website: www.americancontractgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft ECS System Design Engineer - Pacific NW - Contract

Description:
Keltia Design in Everett, WA is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis. We have been providing these services for over 18 years.

We are working with our client in the Pacific NW area that is has a potential 6 mo+ contract for an Aircraft ECS System Design Engineer

Must have 5+ years of experience on Boeing and/or Airbus Mechanical Systems
Knowledge of oxygen and ECS systems required. Experience with fire protection and/or safety systems helpful. Also experience with CATIA V5 required.

The successful candidate will create and check detail, assembly and installation designs/drawings, engineering orders and substantiation documents.

If interested, please include your desired rate and availability on your response along with your most recent resume in a WORD.doc format

Thank you
 
Job Number: KEL7618
Job Location: Pacific NW
Rate: DOE
Per Diem: possible
Overtime: possible
Duration: 6mo+
Start Date: ASAP
Input Date: 09/16/2022
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Electrical Design Engineer - Pacific NW - Contract

Description:
Keltia Design in Everett, is a technical support services company supplying technical recruiting, CAD training, and engineering design services to customers in the Aerospace industry on a permanent or contractual basis. We have been providing these services for over 18 years.

We have a client in the Pacific NW seeking an Aircraft Electrical Design Engineer for a potentially long term assignment

JOB RESPONSIBILITIES
Applies standard engineering techniques involving innovations of methodology to provide solutions to problems involving a limited number of variables. Experience on Airbus type Aircraft preferred.

Performs low to medium complex circuit/wiring design activities including electrical load analysis and subsequently, prepares appropriate validation and verification means.

Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.

Typically focuses on existing products or processes.
Liaises with drafters, technicians, and others to contribute to project completion.

Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
· Performs other related duties as required.

MINIMUM REQUIREMENTS
Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and a minimum of 10 years related professional experience and/or training; alternatively, an equivalent combination of education and experience.

If interested please include your desired rate, availability, and your resume in a word.doc format.

Thank you
 
Job Number: KEL090918
Job Location: Pacific NW
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6mo+
Start Date: ASAP
Input Date: 09/16/2022
Firm Name: KELTIA DESIGN INC
Attention: Mary
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Design Engineer / NX Fibersim / composite components for aerospace CA

Description:
161524/17467

Title Temp Airframe Design Engineer

Job Summary

We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

DUTIES AND RESPONSIBILITIES:
•Able to self-prioritize tasks. Works under general direction
•Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
•Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
•Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
•Conduct periodic design reviews as required to ensure designs meet the requirements.
•Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
•Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
•Prepare PowerPoint presentations to support Program PDRs and CDRs.
Provide technical support and mentorship to those less experience members of the team.

Qualifications Essential Qualifications
Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.
Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment.
Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals.
Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems.
Must be able to work both independently and in a team environment.
Able to work extended hours as required.
A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.

Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

- Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.

- Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.

- Experience with NX and FiberSIM highly desired

City San Diego
State California
Travel Percentage Required 0% - 25%
Clearance Required? No
Work Schedule Rule 9/80
SCA Contract? No
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-17467
Job Location: San Diego, CA
Rate: 60/hr max
Per Diem: no
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
AutoCAD Drafter / Designer (119)

Description:
*This is a one Year contract position located in Hudson, NH*



We are looking for an CAD drafter who will be designing, diagraming, and documenting printed circuit boards for a defense subcontractor. Will be working with schematics, engineering change orders (ECO), PDM tools, etc. Work will be to design considering DoD specifications.



Required:
*3 years’ experience electronics circuit board drafting or designing using AutoCAD Mechanical 2017.
*Familiar with PDM tools.
*Familiar with Cadence Allegro
*Knowledge of ASME Y14.100 and ASME Y.14.5
*Knowledge of DoD work
*Associates Degree in related discipline
 
Job Number: 119
Job Location: Hudson, NH
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
C130J Technical Writer with Clearance (333)

Description:
*This is a full time, 1 year contract position located in Lexington, KY*



We are seeking a contract technical writer with specific experience in writing Time Compliance Technical Orders (TCTOs). Candidate will write, edit and change technical procedure manuals, user manuals, programming manuals, service manuals, etc. Candidate will be writing the documents that will be used by many different parties with different technical backgrounds, all with the need to understand the material.



Daily duties may include communicating and advising by product developers, observe performance of production methodology, reading technical specifications, blueprints, engineering illustrations, and trade journals. The position will involve preparation of illustrative materials, selecting drawings, sketches, diagrams and charts. Conducts quality review of materials.



Required:
*Current active or Interim Secret Clearance (or active within the last 2 years); US Citizens only need apply.
*2+ years’ in writing technical documents.
*Familiar with Time Compliance Technical Orders (TCTO); some knowledge of fixed wing aircraft.
*Able to read engineering drawings.



Pluses
*Familiar with C130s
*Corel or CAD software experience (CATIA, Solidworks, or AutoCAD preferred)
 
Job Number: 333
Job Location: Lexington, KY
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer

Description:
Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing detail design for engineering CAD models. The main product line will require design-to-build activities for a Military aircraft composed of primary composite and secondary composite and metallic structures. In addition, we will require modeling using Parametric modeling techniques for sustainable design.

Minimum Requirements
• Education: A BS degree is highly desired
• 10 years of experience in Aerospace
• 6000+ hours experience with CATIA v5 (Part Design and Generative Surface Design (GSD) a plus)
• At least 2000 hrs on V5R23 or higher
• Entirely 3D CAD Design using Model Based Definition (MBD)
• Experience with ENOVIA\SmarTeam
• Experience with CATIA Functional Tolerancing and Annotation (FTA) workbench-300 hours
• Experience with CATIA Composite Part Design (CPD) a plus
• SmarTeam experience is preferred
• Ideal Candidates : Familiar with GD&T for MBD. Lack of or limited MBD workbench with tolerancing may limit contractor's duration on the program.
• Able to move around a production facility
Must be a US Citizen or Greencard holder.


The Structures Company is an AA/EOE.
 
Job Number: 224
Job Location: VA
Rate: Up to $67/hr., DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: September
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer Aided Measuring Spec 2

Description:
Computer Aided Meas Spec 2

Location: Berkeley, MO
Duration: 6 months

Description:
Assists with the collection of data and provides assistance of data analysis. Interprets tooling orders and develops concept. Develops complex layouts and semi-complex subassembly and fabrication tooling. Analyzes production problems and presents solutions to minimize lost production time. Assists with verification of tooling deliverable. Interprets engineering definition of semi-complex parts or assemblies. Assists with locating parts or subassemblies. Performs creation of two and/or three dimensional CAD models. Assists with the collection of data using metrology systems. Provides assistance of data analysis. Collects geometric features from two-dimensional source data. Works under general supervision. Prefer experience with Verisurf, laser tracker and/or CMM experience

Education / Experience:
Bachelor's degree and typically 3 or more years' related work experience, a Master's degree and typically 1 or more years' related work experience or an equivalent combination of education and experience.

Skill Code: D46-Loft Tooling
 
Job Number: 18-12420
Job Location: Berkeley, MO
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 8/1/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer



Location: Windsor Locks, CT (06096)


Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. May include utilization of computer aided design applications.

This position will be responsible for designing all tooling for (SLS) hardware and ensuring that the processes for tool design are followed.

Candidate will create tool designs working with the cognizant Manufacturing or Test Engineers.
Candidate must ensure processes and procedures comply with all applicable Environmental, Health and Safety requirements as well as all the applicable quality requirements.
Must be able to review drawings and concepts and resolve producibility concerns.
Must be able work well in an integrated product development/ design environment.
Candidate must possess a positive attitude and be able communicate well with staff, IPD teams & management.
Desired experience should include development of tooling for complex mechanical systems, and components such as, heat exchangers, pumps, fans, & accumulators.
Candidate must have experience in the design of complex mechanical hardware or tooling.
Desired experience should include GD&T and ANSI Y14.5, ability to design for manufacturing simplicity and a strong understanding of technical blueprints.
The candidate must be proficient in CREO or similar Cad software. Experience with Windchill is a plus.


Education: Bachelor's Degree

US Citizen















Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54631
Job Location: Windsor Locks, CT
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
The Designer/Drafter will be responsible for reverse engineering existing products for establishment of 3D CAD models and drawing documentation for the organization. There will also be a need to develop new product designs from concept through prototyping and ultimately production. This position will be utilizing CREO 4.0 and SolidWorks 2017 modeling software for these activities.

MAJOR JOB RESONSIBILITIES
Measure existing products from inventory and develop 3D CAD models for those items while also creating 2D drawing packages for their individual components.
Works closely with the Development Engineers to design new products for the category as well as designing product extensions, all at the direction of the Product Manager.

REQUIRED KNOWLEDGE, SKILLS, ABILITIES, & COMPETENCIES
Working knowledge of CAD 3-D Modeling software such as Creo 4.0 and SolidWorks 2017
Strong knowledge of the detailed design of components from metal tube bending, metal stamping, plastic molding, and polyester fabric manufacturing. Ability and desire to work cooperatively with others on a team
Ability to communicate effectively (both orally and written)
Ability to think in such a way as to produce new concepts or ideas
Ability to maintain a consistently high level of attention to detail, meeting aggressive project deadlines
Ability to comprehend complex technical topics and specialized information

REQUIRED QUALIFICATIONS

Education Requirements
Minimum 2-year technical degree; Engineering Technician or technical drafting/engineering preferred

Years of Relevant Work Experience
3+ years in a product development role utilizing 3-D modeling; consumer product experience a plus
Experience in a production environment including mechanical fabrication, finishing/painting, and packaging a plus

ENVIRONMENTAL/PHYSICAL REQUIREMENTS

Physical demands described here are representative of those that must be met to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.
This position is located primarily in an office environment, located next to a manufacturing plant. At times the associate is required to sit for long periods of time, but there are instances of working in the department's prototyping lab.
While performing the duties of this job, the associate may need the ability to lift and carry loads up to 20 pounds.
Upon occasion, the associate may be exposed to a manufacturing environment and required to wear personal protective equipment.
 
Job Number: 18-23713
Job Location: Watertown, CT
Rate: 50.00/hour
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Michael Moritz
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Santa Fe Springs, CA
Rate: $29.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****

Description:
Designer/Drafter your roles and responsibilities will include the following:
- Develop and maintain all Facility drawing packages.
- Develop and maintain system and sub-system drawing packages.
- Develop and maintain engineering manufacturing drawings associated with site.
- Incorporate redlines into existing drawings in multiple CAD systems.
- Must work with minimal supervision after initial orientation.
- Creates and revises site layouts, detailed parts, assemblies, and manufacturing engineering drawings from existing basic layouts, external references, and standard data residing in-house and in public databases to develop final drawings of site, devices, mechanical and piping (P&ID’s) utilizing computer-aided design (CAD).
- Completes new and revision detailing of model designs into layout drawings possibly prepared by others in accordance with standard engineering drafting practices on site.
- Determines scaling; inserts necessary reference planes, centering and dimension lines, hidden line interpolations, and sectioning for parts, assemblies; prepares complete production detail drawings.
- Contributes design modifications to improve quality of product or facilitate manufacturing operations.


Qualifications:
Required:
- High School Diploma with a minimum of 3 years Design/Drafting experience
- 2 years Design/Drafting experience using Inventor 2015 version or higher
- 2 years Design/Drafting experience using Autocad 2015 version or higher
- Working knowledge of NX 8.5.3 or higher
- Familiar with basic parametric modeling
- Proficient in Office 2010 version or higher (Excel, Work, Outlook, Power Point)
- Good understanding of Basic GD&T, version ASME Y14.5M-1994.

Preferred:
- Associates Degree with a minimum of 5 years Design/Drafting experience
- 5 years drafting experience using Inventor 2015 version or higher
- 5 years drafting experience using Autocad 2015 version or higher
- Full understanding of GD&T, version ASME Y14.5M-1994.
- Experience with CADKEY 1999
- Experience with NX 8.5.3 or higher
- Experience with TeamCenter PLM system
 
Job Number: 10003
Job Location: Santa Fe Springs, CA
Rate: $29.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Jacksonville, FL
Duration: 6 Month Contract
Pay Rate: $29.25/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****

Description:
-Performs mid level complexity drafting and design of assembly drawings and CAD models using SolidWorks.
-Applies GD&T.

Requirements:
-Solidworks experience
-GD&T
-Associates degree or higher required
 
Job Number: 9034
Job Location: Jacksonville, FL
Rate: $29.25/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designers - Marine

Description:
Designs components or portions of systems and modifies existing designs to develop or improve products and facilitate manufacturing operations. Utilizes computer-aided design equipment and/or graphic tools such as, CAD, CAM or CATIA. Gathers information, makes studies, computes calculations, and prepares original rough layouts, sketches to present design proposal. Coordinates design criteria with engineering, manufacturing, tooling, material, and planning group such as ease of manufacture, availability of materials, and contractual specifications. Looking to hire multiple Electrical, Structural, Outfitting, Piping, HVAC, and Mechanical Designers.
 
Job Number: 1
Job Location: Pascagoula, MS
Rate: $15-46/hr
Per Diem: No
Overtime: Yes
Duration: LT
Start Date: tba
Input Date: 11/14/2020
Firm Name: JERRY PITTMAN & ASSOCIATES INC
Attention: Kennon Barton
Address: P O BOX 5367
City, State: VANCLEAVE, MS 39565
Phone: 228/826-9255
800 Phone: 877/717-8104
Fax Phone: 228/826-9258
Website: www.jerrypittman.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer(EEE Parts Engineer-Design/Testing) needed in Dulles, VA #8385838AS

Description:
Job Title: Electrical Engineer(EEE parts Design/Testing)#8385838
Location: Dulles, VA
Pay: Open, DOE. Negotiable.
Length: 6 month with possibility of Contract to hire

**Top 3: Electronic parts design and test expertise, ability to work in team setting, understand electrical schematics. Team will be an electrical circuit design engineer, materials engineer, mission assurance engineer, and a CAD designer.**

EEE Parts Engineer responsible for supporting spacecraft programs in the selection of EEE parts for new designs compliant to NASA INST-002 requirements, support identification and mitigation of obsolete parts, generate and maintain spacecraft approved EEE parts lists, review and assess GIDEP and similar technical alerts, provide failure review boards with recommendations for failures involving EEE parts. Interface with customer EEE parts engineers as well as with program lead engineers. Detailed knowledge of EEE part types suitable for spaceflight use and in-depth understanding of INST-002 standard is required for this position.
 
Job Number: #8385838AS
Job Location: Dulles, VA
Rate: 54/hr W2, DOE
Per Diem: N/A
Duration: 6 Month, Possible CTH
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronic Cadence / Calibre Designer (585)

Description:
*This is a full time, 7 month contract, located in Lexington, MA*



We are looking for an Electronic PCB/IC/ROIC Designer that will be working on mixed signal integrated circuits, using Cadence advanced design tool and Calibre.

Candidate will be responsible for implementation of EO/IR ROIC layouts using Cadence layout tools. Will also work with ROIC Design and engineers to update and/or establish design rules and implement design rule checking, as well as contributing to the creation of Process Design Kit (PDK) and design rule manuals.



Required:
*5 years’ experience in Printed Circuit Board layout, using Cadence advanced design tool and Calibre verification tool suite.
*Understanding of EDA tools/analog design basics in deep submicron CMOS and BiCMOS processes
*Transistor-level circuit design knowledge



Pluses:
*Military or DoD subcontractor experience
*Experience with design, development, and production of EO/IR sensors
*Digital VLSI experience
*Pyton or similar scripting skills; Bias generation circuitry o ADCs and DACs familiarity
 
Job Number: 585
Job Location: Lexington, MA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
HVAC Mechanical Engineer – Level 3

Description:
Location: Vandenberg AFB, CA
Rate: DOE
Duration: 1 year contract
Shift: Not Specified
Overtime: Exempt
Per Diem Split: Yes (if eligible)

Job Description:
- The candidate will provide engineering support to include design, operation and maintenance of ground (fixed and portable) ECS/HVAC systems used at all Company VAFB Launch Sites and support facilities.
- Primary assignment is mechanical engineering support of design modifications, launch processing operations and system maintenance for VAFB Atlas V SLC-3E, Delta II SLC-2, and Delta IV SLC-6.
- Additional duties will include mechanical design engineering support of launch site ECS/HVAC modifications and other major facility modifications and/or systems upgrades.

Tasks will include the following:
- Develop new and revise existing operational test procedures and maintenance documentation associated with the launch vehicle ECS and facility HVAC systems to meet customer requirements.
- Serve as engineer responsible for disposition of corrective actions and coordination with cross-functional groups to identify/implement solutions.
- This will include management of facility projects to ensure effective and timely technical integration and implementation.

Education/Experience Required:
- Bachelor of Science from an accredited college in Mechanical Engineering or equivalent experience, with a minimum of 10 years of professional experience; or 5 years of professional experience with a related Masters degree.
- The successful candidate should have experience constructing, modifying and/or operating facility ECS/HVAC systems for space launch facilities and/or heavy industrial facilities.
- Experience with industrial process heating, refrigeration and air-conditioning systems and equipment is essential.
- This position requires competent knowledge of facility ECS/HVAC systems, mechanical engineering design, CAD practices as well as a sound practical (hands-on) knowledge of engineering principles, practices, and industry standards.
 
Job Number: 9253
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integrated Circuit Design Engineer (443)

Description:
*This is a full time, one year contract position located in Santa Barbara, CA*



We are seeking a contract Integrated Circuit Design Engineer who will be designing, developing and testing CMOS ICs (multiple layered). Responsibilities will include comparing logical element configuration on equipment display screen with engineering schematics, redesigning or modifying logic elements, design layouts using CAD software, interface with engineering staff to resolve design details or problems, etc.



Required:
*7 years of IC design engineering, including VLSI to the transistor level.
*Full life cycle experience from design to testing and development.
*Experience with infrared applications

*4 year engineering degree
 
Job Number: 443
Job Location: Goleta, CA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration Systems Design Engineer

Description:
Description:
Lead the effort to create a top tier integration and test facility including procurement of all necessary hardware, tools, and equipment
Lead and empower your team to test and integrate a novel electric aircraft
Develop testing methods and procedures
Execute tests and document test results
Own the vehicle integration
Assist the engineering team and flight test team as required
Maintain records of components, installation procedures, and changes in accordance with standard quality procedures
Effectively communicate engineering intents with your team and integration issues with engineering
Assist with tracking milestone accomplishments including integration status
Requirement:
Experience designing an integrating a variety of aircraft systems - hydraulic, electrical, fuel, ECS, flight controls, etc.
VTOL experience a plus
Experience with light aircraft preferred.
Experience with CAD - Catia V5, NX, etc.
Familiarity with measurement systems, equipment, and sensors
A strong technical understanding of aircraft integration, testing, and quality control
A high degree of understanding of proper practice and safety in working with high voltage electronic systems
At least five years of engineering experience
Experience in a rapid prototyping environment
Excellent communication skills (strong coordination and relational skills to deal with customers, authorities, internal and external partners)
Experience with leading diverse teams
A Bachelor's degree in a relevant subject or equivalent experience - Aerospace, Mechanical, etc.


The Structures Company is an AA/EOE.
 
Job Number: 230
Job Location: ORE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 CA

Description:
8120386
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2

Duties:



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEER AEROSPACE


State/Province: California
City/Town: Canoga Park
Address: 8900 Desoto Ave

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386ATO
Job Location: Canoga Park, CA
Rate: 50-66/hr max
Per Diem: no
Duration: 6 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufactuirng Engineer I

Description:
Manufacturing Engineer I
Savannah, GA
Rate: $35


Unique Skills:

Strong Configuration Management Skills SAP/ERP System experience preferred


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred
 
Job Number: 9612
Job Location: Savannah, GA
Rate: $35
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Manufacturing Engineer perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Manufacturing Engineer ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Manufacturing Engineer has proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (4 needed, Wing Assembly)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Unique Skills:
• Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software.
• Prior Gulfstream and SAP and or Solumina experience preferred.

Education and Experience Requirements:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

Principle Duties and Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
• Proven knowledge of Lean and/or Six Sigma principles.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor.
 
Job Number: 24-246
Job Location: Savannah, GA
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.
This is a Third Shift position


Unique Skills:
• Strong Configuration Management Skills SAP/ERP System experience preferred
Principal Duties And Responsibilities:
• Perform technical studies and conduct analysis of operations (existing or proposed).
• Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.
 
Job Number: 24-279
Job Location: Savannah, GA
Rate: $40
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Long Term Contract
Location: Savannah, GA
Shift: 3rd
Pay Rate: $50/HR

Unique Skills:

Strong understanding of Configuration Management SAP ERP System experience preferred


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 9555
Job Location: Savannah, CA
Rate: $50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Pay Rate: $50/HR
Duration: Long Term Contract

Unique Skills:

Preferred Experience in a Manufacturing or Mechanical Environment. Should have good communication and customer satisfaction skills. Required Experience with ERP or Manufacturing Planning Software and Microsoft Office Software. Prior aerospace and SAP and or Solumina experience preferred.


Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.


Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 9486
Job Location: Savannah, GA
Rate: $50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract


Unique Skills:
Solumina and SAP experience preferred

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8642
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II/III

Description:
Location: Canoga Park, CA
Rate: Level II = $35.00 - $39.00/HR
Level III = $40.00 - $48.00/HR
Duration: 6 month contract
Shift: Regular 40 hour week. OT Possible
Per Diem Split: Yes (if eligible)


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Looking for go getters with positive, can-do attitudes. Candidates must be open to learning and be able to take initiative. This is by far the most important attribute needed **


Duties:
The Manufacturing Engineer classifications are responsible for design, fabrication, modification, analysis and evaluation of manufacturing operations, processes, procedures and production layouts for the support of manufacturing/assembly operations such as rocket motor propellant and/or insulation manufacture, equipment installation, machining, metal forming, welding and brazing, and material handling.


Skills:
Required Skills:
-Designing and planning of layout component fabrication, assembly and material handling, planning of sequence of operations, and specification procedures.
-The scope of responsibility will be for several mechanical components or as a process engineer supporting new and developing process.

Desired Skills:
-Tight tolerance machining, Welding, Design systems (ProE, CATIA, VisMockup, CAD/virtual manufacturing) .
-Manufacturing fabrication and assembly processes and systems. Verbal and written communication.
-Project management skills and MS Office applications ( Word, Excel).
-Experience with Maestro, Delmia and Windchill are preferred, not required.
-Aerospace experience preferred but not required.


Education:
- BS degree in Manufacturing /Industrial Technology or Engineering required
 
Job Number: 8010
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer III

Description:
Location: Brunswick, GA
Rate: $62.00/HR
Duration: Long Term
Shift: 1st Shift

**MUST be a U.S. Citizen or Permanent Resident**

Unique Skills:
Background in BOM and drawing analysis as well as knowledge of CATIA and Corridor preferred.

Other Requirements: 1. Proven knowledge and understanding of Lean and/or Six Sigma principles and processes. 2. Knowledgeable of Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Complete understanding and experience implementing Lean Manufacturing Concepts: 5S, JIT, SMED, KanBan, VSM, One Piece Flow, etc. 5. Working knowledge of Six-Sigma or other data-driven decision making experience highly desirable. 6. Lean Six-Sigma Green Belt, equivalent certification, or proven experience in a Lean Six-Sigma environment highly desirable.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 4 years manufacturing engineering, planning, or related technical experience.

Position Purpose:
Work/Lead independently to prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 19. Author DRDI/DMT rework instructions to support effective corrective actions. 20. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 21. Generate make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings. 7. Apply statistical methods to estimate future Manufacturing requirements; make necessary computer inputs and generate data or reports as needed. 8. Prioritize workloads based on schedules and needs; provide completion dates and work estimates based on available resources, past performance schedules, etc. 9. Keep current on state-of-the-art manufacturing developments. 10. Incorporate Lean Manufacturing Methodology into existing and future processes. 11. Develop business case and present to management for process improvement approval. 12. Assume the duties of the ME Group Head in his/her absence. 13. Assign and review work of subordinate personnel. 14. Supervise and train subordinates in work methods and procedures in the efficient and effective use of company resources to resolve work-related or quality problems. 15. Lead/coordinate the implementation of projects between multiple orgs. 16. Apply Lean and Six Sigma principles to manufacturing methods as a team member/leader. 17. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Ensure quality policies are being practiced; make recommendations to improve quality. Perform other duties as assigned.
 
Job Number: 8938
Job Location: Brunswick, GA
Rate: $62.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Checker - Tech Spec I

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Check 2D engineering data and 3D models for conformance to Gulfstream requirements as directed
• Check parts for fit, form and function to the extent that information is available.
• Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets.
• Checkers are responsible for determining the acceptability of data in the following areas:
o Accuracy and completeness of engineering product definition data, including CAD and PDM data.
o Proper application and compliance with all Engineering and customer drawing requirements.
o Use and understanding of GD&T a must.
o Dimensioning and tolerancing including familiarity with ASME Y14.5.
o Application of best drafting and design practices and procedures.
o Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
o Advise Design personnel regarding GAC drawing and design practices and procedures.
o Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
o Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
o Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
o Knowledge of GAC parts list & PdocM, a plus.

Principal Duties and Responsibilities:
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-260
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 YR Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electro-mechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Bachelor's Degree
- Familiarity with aerospace design practices including designing for light weight design and random vibration environments; working knowledge of geometric dimensioning and tolerance analysis; modeling and drawing creation in Creo/Pro-Engineer.
- Experience with company designed hardware on the EMU, ESOC and Space Station programs is a plus.
 
Job Number: 9469
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split: NO

**Must be a U.S. Citizen**
**Must have a Bachelor's Degree**

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Familiarity with aerospace design practices including designing for light weight design and random vibration environments.
- Working knowledge of geometric dimensioning and tolerance analysis.
- Modeling and drawing creation in Creo/Pro-Engineer.
- Experience with Company designed hardware on the EMU, ESOC and Space Station programs is a plus.

Education:
- Bachelor's Degree
- 5+ years of experience
 
Job Number: 9308
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it?s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Requirements:
> 7+ years? work experience in computer aided drafting with an Associate?s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus

***This definitely isn?t your typical ?contract? assignment as it comes with six (6) paid holidays, accrued Paid Time-Off (PTO) and the option for medical, dental and vision plans through my company***
 
Job Number: 023_2018
Job Location: Hanover, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Yes / Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Job Description

Work Type Level 2 Mechanical Engineering (Regular Temp)

Title Mechanical Engineer I

Job Description

1) Develop mechanical prototypes using CAD and rapid prototyping methods 2) Design test fixtures for verification, characterization, calibration, and reliability testing for devices with electronic, fluidic, and mechanical functionalities 3) Define test plans in collaboration with the lead engineers 4) Troubleshooting of devices during early stages of design and development 5) Analyze test failures and work with design engineers to identify the root cause of failure 6) Perform mechanical testing of components and materials, data analysis Candidate must be well-versed in 3D CAD, prototyping methods, mechanical testing, and basic data analysis. Awesome analytical and organizational skills, coupled with a well-focused attention to details; ability and commitment to produce a timely and highly accurate work.

Skill/Experience/Education

Mandatory Bachelor's or higher degree in engineering discipline (mechanical, materials, biomedical).
Demonstrated experience in industrial R&D environment - 3D CAD (Solidworks)

Desired Experience in mechanical testing, basic experience with JMP/Matlab, basic data analysis and statistics
 
Job Number: 391199
Job Location: Seattle, WA
Input Date: 11/14/2020
Firm Name: CDI CORPORATION
Attention: Jonathan Oleson
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Basic Qualifications
•Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering
•US Citizenship or Permanent Resident (Green Card) required
•Experience in mechanical engineering design and development
•Knowledge of engineering materials and processes
•Experience with structural and thermal management design
•Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)
•Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles
•Strong technical, analytical and problem solving skills
•Ability to effectively communicate throughout all levels of the organization

Additional skills or experience a plus:
•Packaging of electronic and/or precision optical systems
•Design of manufacturing, calibration and test support equipment
•Aluminum fabrication techniques including: machining & investment casting
•Experience in avionics or aerospace industry
 
Job Number: RC14177
Job Location: Portland, ORE
Rate: $45
Per Diem: split
Overtime: Yes
Duration: 6 mos
Start Date: 08/20/2018
Input Date: 11/14/2020
Firm Name: NESC STAFFING
Attention: Lary O'Keefe
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems - Ground Support Equipment (GSE) Engineer

Description:
This experienced, hands‐on Mechanical Systems Engineer will coordinate mechanical systems engineering efforts related to the flight testing, operational implementation, documentation, FAA Part 400 licensing, modifications management and issues resolution of air vehicles and GSE (ground support equipment). Qualified candidates should have a strong technical background in aerospace or aviation mechanical systems and flight controls, as well as composite structures and/or aviation/aerospace ground support equipment. In any of these roles the person in this position may be asked to provide day to day direction to operations technicians.


Description
Oversee and manage the development, implementation, testing, and integration of air vehicles for mechanical systems, to include Flight Control Systems, Landing Gear, Brakes, and GSE.
Work closely with maintenance management and engineering to maintain vehicle/GSE functionality and to improve systems, processes, and operations for the air vehicle mechanical systems.
Coordinate the engineering activities between the various engineering specialties within the product team.
Track, manage and mitigate the mechanical systems engineering risks.
Ensure all customer product requirements are met.
Conduct tests and/or missions support from the Mission Control Center for mechanical systems as required.
General duties include:
· Coordinate and/or integrate with systems engineers and counterpart designers on modifications and/or design change proposals for the air vehicle systems.
· Review and propose concepts for redesign recommendations based on operational experience, reliability, maintainability, etc. on the air vehicle systems.
· Review and approve technical publications. Propose modifications where appropriate. Includes:
o Review and approve repair manuals for mechanical systems. May author portions as appropriate.
o Approve and/or review disposition for component removals and replacements.
o Author and/or approve mechanical system anomaly troubleshooting dispositions.
o Author and/or approve mechanical systems Work Instructions/Engineering Reports.
· Develop and remain technical authority for assigned Flight Rules, Launch Commit Criteria, and Required Equipment List (REL) items, and how they interact with the air vehicle systems.
· Manage and implement process to make real-time decisions and/or issue waivers to hazard reports, flight rules, launch commit criteria, and REL items for the air vehicle systems.
· Provide mission control room systems engineering support in real time during the mission to monitor systems performance and recommend corrective actions on issues.
· Coordinate post flight data analysis functions, including continued development of system health monitoring and reliability data for more established systems
· Integrate analysis of tear down and failure reports for failed vendor components (if available)
· Communicate reliability data/recommendations back to designers.
Bachelor’s degree in Aerospace or Mechanical Engineering, with 1+ years relevant industry experience
Successful aviation/aerospace project engineering management experience, is desired but not required
Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
1+ Experience with aviation mechanical/flight control systems, pneumatic systems, design or operations desired
Excellent analytical and problem-solving skills with high attention to detail
Ground and flight testing experience of new aircraft systems is desirable
Excellent verbal and written communication skills
Excellent interpersonal and customer service skills
Strong IT skills, including Excel and Product Lifecycle Management (PLM) tools. Computer Aided Design (CAD) experience is desirable
Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

The Structures Company is an AA/EOE.
 
Job Number: 215
Job Location: Mojave, CA
Rate: $55-$70/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer (Laser Tracker Operator)

Description:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Unique Skills:
1. Must have extensive experience with Laser Trackers
2. Knowledge of Metrolog X4V5, X4, and XG.
3. Knowledge of session management and releasing in SmarTeam is a plus.

Education and Experience Requirements:
Bachelors degree in Mechanical Engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Three (3) years Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience. Two (2) years 3D CAD/CATIA experience.

Other Requirements:
Extensive knowledge of metrology equipment, software and current measurement techniques.
Knowledge 3D CAD/CATIA modeling and an understanding of GD&T.
Knowledge of Lean and/or Six Sigma principles
 
Job Number: 24-269
Job Location: Savannah, GA
Rate: $50 - $55/hr
Per Diem: YES
Overtime: YES
Duration: 1 plus years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Engineer II

Description:
Metrology Eng II
Savannah, GA
Rate: $50-$55

FAA Regulated?: No


Unique Skills:

Required: Must be US citizen. Ability to read/understand complex blueprints, sketches, verbal instructions and tools. Tooling experience and/or relevant training preferred. Experience with using precision 3D measurement devices to locate and assemble parts or tools. Must be proficient in the use of laser trackers. Experience with Metrolog X4 or X4V5 software preferred. Experience with Catia V5 software preferred. ***This job involves extensive Laser Tracker work on the shop floor. Experience with Laser Trackers is a must.***


Education and Experience Requirements:

Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of Metrology Engineering, Manufacturing Engineering, Automation Engineering or related technical experience.


Position Purpose:
Under minimal supervision, prepare, conduct, and evaluate for the implementation, programming and support of metrology equipment in tooling, program development and production. Assist with the improvements and problem solving for design and manufacturing issues related to tooling, material fabrication and assembly methods.

Principle Duties and Responsibilities:

Essential Functions: 1. Interpret & consolidate aircraft engineering, tooling designs and production requirements, to develop optimized measurement plans and processes. 2. Under minimal supervision, develop programing for all measurement equipment that will be used in the development, manufacture and support of Gulfstream aircraft. 3. Collaborate with engineering, tooling, manufacturing engineering and operations to determine optimal manufacturing procedures. 4. Assist in developing and documenting standards for the handling and utilization of metrology equipment. 5. Create standardized inspection reports through the utilization of Metrologic software. 6. Study and optimize equipment performance for increased capacity and equipment efficiency. 7. Interact and collaborate with equipment vendors on warranty repairs, necessary improvements and upgrades. 8. Set up and utilize precision measuring tools; validates measurement results for accuracy and repeatability. 9. Provide and/or contribute to the documentation of new or recent processes involving metrology techniques or equipment. 10. Coordinate the implementation of projects between multiple organizations. 11. Support all Safety, Sustainability and Ergonomic Initiatives.

Additional Functions: 1. Work to improve daily processes, and ensures all work meets customer requirements. 2. Assist tool shop as needed, during periodic and conformity Inspections. 3. Provide input toward the selection of metrology equipment and software. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of metrology equipment, software and current measurement techniques. 2. Knowledge 3D CAD/CATIA modeling and an understanding of GD&T. 3. Knowledge of Lean and/or Six Sigma principles.
 
Job Number: 9439
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX CAD Mechanical Engineer - Vehicle Chassis Electric Vehicle

Description:
One of the world's leading heavy-truck manufacturers is looking for an NX Cad Designer/Engineer to join their team! This group is developing prototype future vehicles. You can be a part of the cutting edge of engineering and technology of these special trucks.

Major Responsibilities:
Responsible to create and design mounting brackets
Create 3D solid and surfaced models
Create assemblies and sub assemblies.
Packaging components for fit and accessibility.
Great to be a able to conduct FEA internally to meet program milestones and deliverable s.
Conduct CAE analyses such as modal and vibration analyses, and other studies as required to support product development
Perform necessary analysis support such as recommendations to improve the design for strength.
Have PDM database structure experience
Education:

Must have Bachelors Degree in Mechanical Engineering.
 
Job Number: 5006
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
PLM Configuration Analyst III

Savannah, GA
Long Term Contract
Pay Rate: DOE

1st Shift

Unique Skills:

Experience with 3DX/V6 preferred

Education and Experience Requirements:

Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required. Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).

3 years of Database experience, data migration/conversion or related experience preferred.


Position Purpose:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities:

Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out.
2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
3. Direct activities for lower level engineering staff assigned to specific projects.
4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
6. Determine user needs and utilize system queries and utilities to support users information research.
7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades.
2. Ensure compliance with FAA regulatory requirements for management and control of all type design data.
3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
2. Previous experience with digital pre-assembly of product components (aerospace preferred).
3. Experience in process mapping and other process improvement techniques preferred.
4. Familiarity with computer-aided design, manufacturing and product data management systems.
5. Basic knowledge of design engineering and manufacturing engineering applications and processes.
6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
Languages Required (in addition to English): None
 
Job Number: 8978
Job Location: Savannah, GA
Rate: DOE
Per Diem: Possible Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy

Unique Skills:
• Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
• Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required.
• Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
• 3 years of Database experience, data migration/conversion or related experience preferred.

Principle Duties and Responsibilities:
• Create plans according to schedules, for engineering assignments, and act independently to carry them out.
• Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
• Direct activities for lower level engineering staff assigned to specific projects.
• Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs.
• Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
• Determine user needs and utilize system queries and utilities to support users information research.
• Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
• Design and develop business reports and system status metrics.
• Provide training on new functionalities and upgrades.
• Ensure compliance with FAA regulatory requirements for management and control of all type design data.
• Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
• Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
• Previous experience with digital pre-assembly of product components (aerospace preferred).
• Experience in process mapping and other process improvement techniques preferred.
• Familiarity with computer-aided design, manufacturing and product data management systems.
• Basic knowledge of design engineering and manufacturing engineering applications and processes
• Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
• Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 24-237
Job Location: Savannah, GA
Rate: $57
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
PLM Configuration Analyst III

Description:
PLM Configuration Analyst III

Location: Savannah, GA
Pay Rate: $57/hr
Duration: Long Term W2 Contract
Shift: First

Unique Skills:
Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

Education and Experience Requirements:
-Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
-Six (6) years of engineering or IT experience required.
-Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
-3 years of Database experience, data migration/conversion or related experience preferred.

Position Purpose:
Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

Principle Duties and Responsibilities/Essential Functions:
1. Create plans according to schedules, for engineering assignments, and act independently to carry them out. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Direct activities for lower level engineering staff assigned to specific projects. 4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 6. Determine user needs and utilize system queries and utilities to support users information research. 7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems. 8. Design and develop business reports and system status metrics.

Additional Functions:
1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

Other Requirements:
1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
 
Job Number: 8822
Job Location: Savannah, GA
Rate: 57
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Board level Design Engineer (281)

Description:
*This is a full time, 9-12 month contract position, located in Owego, NY*



We are seeking a MW RF Engineer who will be designing radome antenna systems for military applications. Candidate will be working particularly in the board design, but also in all facets from base level circuitry used in receivers, transmitters, antennas, low noise or high power amplifiers, synthesizers to hardware layouts, component evaluations, prototype construction, testing and implementation.



Some daily duties will include testing RF hardware [and testing with network analyzers, logic analyzers, and spectrum analyzers], doing link analysis and optimization-including effects of propagation medium and possible interference sources, identifies/tracks RF technical performance measurements (TPMs), conducts RF system/subsystem/ component trade studies and CAIV analysis. Supports Life Cycle Costs, reliability, availability, and maintainability analysis.



Required:
*7 years’ experience in MW RF Engineering, particularly in circuit board/card design.
*Experience with schematic capture and printed wiring board layout using industry tools (Cadence, ORCAD, Mentor Graphics, Zuken CR-5000).
*Able to apply and gain a Secret Clearance upon starting, which requires US Citizenship.
*Per diem split is available for candidates living more than 75 miles from Owego, NY
*4 Year engineering degree



Pluses:
*Antenna radome designing experience
*Test equipment design and programming using one or more of the following: Spice, HFSS, ADS, Matlab, Labview, Wireless Communication.
*Experience with laboratory work/testing and with analog, RF, and digital hardware, including practical experience with network analyzers, logic analyzers, and spectrum analyzers.
 
Job Number: 281
Job Location: Owego, NY
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineer

Description:
Our client is looking for an experienced RF Engineer with an ability to obtain a secret clearance. This opportunity will be in the great state of New York! Ideal candidates will have 4-5 years of RF Design experience, so if this sounds like you then apply today!

The ideal candidate for this position will perform the following tasks:
* Architects and designs Radio Frequency systems and circuitry.
* Designs and develops RF circuitry used in high frequency and microwave applications, including receivers, transmitters, antennas, and frequency synthesizers.
* Responsible for hardware layout, component evaluation, prototype construction, and test.
* Prepares test methods and specifications; analyzes and tests RF hardware to verify performance characteristics.
* Provides inputs to Product Development for formal documentation and supports manufacturing during the deliverable assembly and test phase.
* Develops RF System/Subsystem Architectures consisting of: antennas, transmitters, receivers, low noise amplifiers, high power amplifiers, RF conversion elements and transmission line equipment.
* Performs link analysis and optimization, including effects of propagation medium and possible interference sources. Develops and allocates RF system and subsystem functional and performance requirements.
* Identifies and tracks RF technical performance measurements (TPMs).
* Performs RF system/subsystem/component trade studies and CAIV analysis.
* Supports Life Cycle Costs, reliability, availability, and maintainability analysis.
* Perform RF/Analog production support and development work for advanced state-of-the-art receivers, transmitters, antennas, radomes, and anti-jam GPS systems.
* Design, test, and evaluate RF, analog, and digital hardware and test equipment. Perform computer aided circuit design.

Mandatory Qualifications and Experience:
* Some experience with laboratory work/testing and with analog, RF, and digital hardware, including practical experience with network analyzers, logic analyzers, and spectrum analyzers.
* RF Board Design experience required.
* Familiarity with MS Office applications.
* Ability to obtain a secret clearance.

Desired Qualifications and Experience:
* RF design, digital/analog circuit design, antenna and radome design, test equipment design and programming, Spice, HFSS, ADS, Matlab, Labview, Wireless Communication.
* Experience with schematic capture and printed wiring board layout using industry tools (Cadence, ORCAD, Mentor Graphics, Zuken CR-5000).

The ideal candidate for this position will possess the following skills and characteristics:
* Problem solving skills.
* Strong organizational and communication skills

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 128558
Job Location: Owego, NY
Duration: 1 year
Start Date: 08/13/2018
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Engineer

Description:
Interim Clearance Sufficient

RF design, digital/analog circuit design, antenna and radome design, test equipment design and programming, Spice, HFSS, ADS, Matlab, Labview, Wireless Communication.
Experience with schematic capture and printed wiring board layout using industry tools (Cadence, ORCAD, Mentor Graphics, Zuken CR-5000).
 
Job Number: 1967
Job Location: NY
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical / Structural Engineer Level 4

Description:
Location: Vandenberg AFB, CA
Rate: DOE
Duration: 1 year contract
Shift: Must be available for any shift (second/third shifts and weekends as required)
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
The Mechanical/Structural Engineer will produce moderately-complex technical designs and some mechanical analysis of new and existing facility related systems in support of our clients Atlas V, Delta IV and future Vulcan Launch Operations at Vandenberg Air Force Station in California. The successful candidate, as part of our clients Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

Requirements:
- The successful candidate should have at least (10) years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial mechanical systems.
- Experience with hydraulics, motors, cranes, door and platform systems is desired.
- Engineer shall have experience managing contractors, trouble shooting issues with large mobile structures and authoring operational instructions for complex systems.
- Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations.
- Project support will also include generation of Statement of Work, Contractor documents for schedule integration, fabrication and installation phases.
- The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities.
- The successful candidate should be self-motivated and able to work productively without constant direct supervision.
- He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments.
- Some outside work climbing stairs and accessing ladders will be required.
- He/she may need to work at heights on launch structures and facility catwalks.
- The successful candidate shall be willing to support second/third shifts and weekends as required.


Required Skills:
- This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards.
- At least 10 years of recent Autodesk AutoCAD experience.
- Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 9010
Job Location: Lompoc, CA
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical / Structural Engineer Level 4

Description:
Location: Decatur, AL
Rate: DOE
Duration: 1 year contract
Shift: Must be available for any shift (second/third shifts and weekends as required)
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

Job Description:
The Mechanical/Structural Engineer will produce moderately-complex technical designs and some mechanical analysis of new and existing facility related systems in support of our clients Atlas V, Delta IV and future Vulcan Launch Operations at Decatur, AL. The successful candidate, as part of our clients Engineering and Infrastructure Team, shall be required to produce accurate and detailed design drawings as well as generate validating system analysis calculations. He/she will gather information, perform field walk-downs, and create or revise electronic CAD files. Projects typically involve implementations being performed by external Contractors, in accordance with construction documents.

Requirements:
- The successful candidate should have at least (10) years of relevant experience in designing, building, modifying, testing and maintaining commercial and industrial mechanical systems.
- Experience with hydraulics, motors, cranes, door and platform systems is desired.
- Engineer shall have experience managing contractors, trouble shooting issues with large mobile structures and authoring operational instructions for complex systems.
- Apply knowledge of functional testing requirements to ensure product and/or service meets or exceeds customer expectations.
- Project support will also include generation of Statement of Work, Contractor documents for schedule integration, fabrication and installation phases.
- The successful candidate will be required to coordinate multiple construction activities and project schedules around launch activities.
- The successful candidate should be self-motivated and able to work productively without constant direct supervision.
- He/she will be given latitude to establish priorities, determine technical objectives and define the most efficient approaches to completing assignments.
- Some outside work climbing stairs and accessing ladders will be required.
- He/she may need to work at heights on launch structures and facility catwalks.
- The successful candidate shall be willing to support second/third shifts and weekends as required.


Required Skills:
- This position requires expert knowledge of mechanical design, analysis and drafting practices and a sound practical knowledge of engineering principles, practices, and industry standards.
- At least 10 years of recent Autodesk AutoCAD experience.
- Other 3D modeling and design experience in Autodesk Revit or other Building Information Modeling (BIM) software is highly preferred.
 
Job Number: 9567
Job Location: Decatur, AL
Rate: DOE
Per Diem: Possible Split
Overtime: Exempt
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr I & E Designer (OK)

Description:
Looking for one instrument/electrical designer (Project Designer or Senior Designer), please send resumes to me at this email.

This designer needs 15 plus years of experience.

Primary Functions/Responsibilities:

Safety
Provide an environment and system that results in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

Integrity:
Responsible, ethical, honest, accountable, and will deliver on all commitments.

Responsibility:
Provide design and drafting expertise to develop, instr/elect detail design packages for projects.

Provide quality design packages that satisfy the Refinery Standards and Guidelines.

Must be able to create a design schedule and complete projects in a timely manner.

Strong project and CAD experience.
(MicroStation experience a plus)

Strong Smart Plant Instrumentation
(SPI) would be a big plus (This is an instrument database that is widely used in the industry)

Must be a good communicator both verbally and written.
Must be able to gather field data and measurements.
Must be able to climb stairs and ladders.
Strong team player
Will be required to review and check vendor drawings.

FOSTER DESIGN'S BENEFITS:
• Working for a 54-year old company
• Minimum 10 Paid Holidays with no waiting period
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Free Financial Consultant
• Medical/Dental/Vision/Prescription card – BCBS
• MetLife – Long Term Disability Insurance
• Vacation Pay
• Per Diem Assignment Allowance, when applicable
• Per Diem Split, when applicable
• Paid Weekly (Direct Deposit)
 
Job Number: FD-010619OK
Job Location: Ponca City, OK
Rate: $BOE/HR
Per Diem: No - but a PD Split is possible
Overtime: Possible
Duration: 11 Months or longer
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Conceptual Structural Design Engineer who is proficient in aircraft conceptual and preliminary structural design, layout, and sizing. The position is within the fast paced and wide reaching Advanced Design team. Familiarity, and willingness to learn, with all speed regimes (subsonic, supersonic, hypersonic) and vehicle configurations (general aviation, fighters, helicopters, spacecraft) is highly recommended. Ultimately responsible for providing initial program direction on structures with appropriate level of fidelity and manufacturing considerations in mind.
Plays an integral role in all structural designs for the Advanced Design team
Perform aircraft conceptual and preliminary structural design and analysis
Perform trade studies (weight, performance, structural sizing)
Coordinate with the structural design and stress analyst teams on guidance of proper analysis methods.
Reviews, updates, and compiles engineering analytical definition of structural components and assemblies for a variety of projects
Supports development of manufacturing plans and procedures to ensure compliance with design and loads requirements
Supports the creation of structural test plans which will be used to verify manufacturing
Perform customer presentations, engineering reports, specifications and proposal writing
Requirements
Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
Prefer 7+ years of experience in aircraft conceptual and preliminary design
Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
CAD experience (CATIA V5 and/or SolidWorks) is preferred
Knowledge of composites manufacturing -- hands-on experience with composites part fabrication and assembly processes a plus.
Experience in the analysis of structural systems using strength of materials and finite element based methods
Experience with free-body diagrams and classical stress analysis techniques
Knowledge of composite structural analysis and sizing using classical and finite element methods
Experience with composite finite element modeling including pre and post processing of NASTRAN models -- proficiency in FEMAP a plus
Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
Excellent verbal and written communication skills
Excellent organizational skills and problem-solving skills
Strong team player
Excels in a fast-paced environment with loosely defined problems
Excellent computer skills, including Outlook, Word, Excel and PowerPoint
Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 192
Job Location: Mojave, CA
Rate: $65.00-DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design/CPD/Composite Workbench

Description:
Description:
Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
Create 3D/2D definition of parts, assemblies and installations.
CATIA V5, CPD/Composites workbench is required
MUST BE US PERSON
Establish manufacturing tolerances for production of structural components using GD&T.
Participate in the Engineering definition review, approval and release process
Support the review of manufacturing plans and procedures to ensure compliance with design requirements
Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

The Structures Company LLC is an AA/EOE.
The Structures Company is an AA/EOE.
 
Job Number: 193
Job Location: Mojave, CA
Rate: $60- $70.00-DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supervisor, Aircraft Equipment and Furnishing - JF

Description:
Our customer is looking for a Supervisor for their Aircraft Equipment and Furnishing. Will oversee and coordinate all interior systems project efforts, including conceptual design, preliminary design, detailed design, validation, certification, production, and field service. Leads team of engineers, engineering designers, and industrial designers responsible for aircraft interiors and seating systems across all aircraft models. Will be Supervising up to 6 people.

(Requirements) Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or similar. Five years of work experience and Supervisory experience. CAD experience, preferably Pro-E/CREO. Advanced 3D surfacing abilities, preferably ICEM. Experience producing production part and assembly drawings. GD&T proficiency. Experience with FAA Part 23 requirements and means of substantiation, specifically 23.562, 23.853, 23.855, and 23.785.
 
Job Location: Duluth, MN
Input Date: 11/14/2020
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Jim Fry
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III & IV (Oklahoma City, OK)

Description:
SEVERAL OPENINGS IN THE OKLAHOMA CITY, OK AREA.

Active Secret Clearance, NOT required to start.

Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel.

AA degree in related discipline and typically 3-7 or more years of related experience or an equivalent combination of education and experience.

CATIA V5, Enovia.

ACS Group (formerly 'Comforce')
 
Job Number: DesignOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer III - (WA) CATIA V5

Description:
Uses manual or Computer Aided Design (CAD) CATIA V5 tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel.

CATIA V5

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
 
Job Number: TechDesWA
Job Location: Tukwila, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design

Description:
Seeking a Tool Designer located in Palmdale, CA.

RESPONSIBILITIES:
Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements. Complete understanding and wide application of technical principles, theories and concepts, in the field. Independently determines and develops approach to solutions. Provides technical solutions to a wide range of difficult problems. May use CAD/CAM to design tools.

REQUIRED EXPERIENCE:
Aerospace Tool Design experience required.
5000+ hours of CATIA V5 experience designing tools.
Experience with CATIA 4-6 years, Computer Aided Design 4-6 years, and Tooling 4-6 years.

EDUCATION:
Accredited BS+9-15 YRS or MS+7-13 YRS

WORK HOURS:
Full-Time/First Shift
 
Job Number: 172656
Job Location: Palmdale, CA
Rate: $60.50
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design

Description:
Our client in Palmdale, CA is seeking out a tool design engineer to join their team. Read below for more details!

The ideal candidate for this position will perform the following tasks:
* Designs industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
* Complete understanding and wide application of technical principles, theories and concepts, in the field.
* Independently determines and develops approach to solutions.
* Provides technical solutions to a wide range of difficult problems.
* May use CAD/CAM to design tools.

Mandatory Qualifications and Experience:
* ITAR is required.
* Must be a U.S. Citizen.
* Aerospace Tool Design experience required.
* 5000+ hours of CATIA V5 experience designing tools.

Desired Qualifications and Experience:
* An active secret security clearance is preferred but NOT required for ADP unclassified programs.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 128439
Job Location: Palmdale, CA
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

Back to Advanced Job Search