Job Search Results

639 listings were found that matched your search words: Keywords: Aircraft ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/03/07 Sunday 07:47PM Pacific Time by ContractJobHunter. )

Listings 1 - 639

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Aircraft Stress Engineers - Composites

Description:
Aircraft composite stress engineering contractors needed.
MUST BE US PERSONS.
Ability to work in a fast paced environment.
MUST have a good Composites Primary Airframe Structures background.
FAR 23 experience is a huge plus.
Classical hand analysis, Nastran, FEMAP a plus
US PERSONS REQUIRED

Position Responsibilities
This is a Senior Level Contract Stress Analyst position.
General Minimum Requirements:
• Education: MS with 8+ years, or BS with 1O+ years of relevant experience
• Create engineering criteria and analysis methods to ensure that the work meets all program requirements (e.g., airworthiness, customer requirements, internal methods and processes, etc.).
• Actively develop and evaluate plans for activities and soundness of proposed methods and analysis to meet the program schedules and airworthiness standards.
• Select appropriate material systems for structures applications and identify all material testing requirements.
• Identify and communicate technical risks to the relevant stake holders through program status reports in a timely manner.
• Review all program critical documents such as stress reports, manufacturing plans and procedures, and structural test plans in a timely manner to ensure compliance with design and loads requirements.
• Resolve complex engineering issues in creative and effective ways as to balance technical product, cost, and schedule.

Must be a US Citizen, or Greencard holder.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Manassas, VA
Rate: $75-85/hr DOE
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2 Stress Engineer Openings - Composites - Contract-to-Hire

Description:
We have a need for 2 Aircraft Composite Stress Engineers that are open to a contract-to-hire scenario. MUST be US Citizens.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Citizens

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. Citizens
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Contract-to-hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2560 - AVIONICS SYSTEMS ENGINEER - cv, word doc only

Description:
Interfacing with customers (both internal and external) during definition and implementation of avionic system integration.

Execute program milestones according to established schedule and ensure critical path and key dependencies are effectively managed to achieve successful outcome.

Reviewing detailed execution plans and schedules with the project management team to ensure adequacy, completeness, and harmonization with the overall program level plan.

Generating system requirements documents for physical and logical interfaces.

Defining cockpit display formats and control operation in conjunction with the customer.

Developing and running functional test procedures for all avionics sub-systems.

Advising the customer on the physical installation of avionics equipment.

Troubleshooting and diagnosing avionics problems on the systems integration rig and flight test aircraft (may involve travel)

Documenting, tracking, and resolving avionics problems resulting from both design errors and equipment failures.

Generating certification documents for subsystems demonstrating compliance with OEM certification plans.

Supporting Change Management related activities at the program level.

Bachelor's Degree in applicable engineering or science field, and ten years of related experience, or, in the absence of a bachelor's degree, sixteen years of related experience.

Detailed systems knowledge is required in at least five of the following systems: AFCS, Air Data, Cockpit Audio, Cockpit Printers, Datalink, EFIS, EICAS, Enhanced Vision Systems, FANS, FMS, GPS, Graphical Datalink Weather, HUD, Integrated Modular Avionics (IMA), On-board Maintenance Systems, Radio Altimeters, Synthetic Vision Systems, TAWS, TCAS/Transponders, VHF Comm, VHF Nav, XM Weather.

Analysis - thinking through a logical, in-depth analysis of a problem or situation.

Cooperation - Serves as a role model to his or her coworkers by demonstrating respect and sensitivity for fellow workers and promoting open discussion of issues.

Coordinating - Provides a seamless stream of communication and support.

Customer Service Orientation - Fully comprehends the value of the organization's customers and champions strategies to ensure world-class service.

Dependability - Consistently produces exemplary results that can be used as prototypes for future projects.

Judgment - Able to quickly assess the costs, benefits, and risks of a decision while using sound logic to ultimately make well-informed decisions.
 
Job Number: 2560
Job Location: Toronto, Canada
Rate: 85.00
Per Diem: No
Overtime: 1.5
Duration: Long Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2571 - EMC ENGINEER - cv, word doc only

Description:
Execute complex engineering assignments requiring expertise within EMC field.

Analyze modifications at Aircraft level and check compliance with certification regulations.

Estimate the level of impact of complex projects.

Propose plans for production ramp-up.

Participate in complex investigations related to cost reduction.

Participate in meetings and design reviews with system or structural suppliers for design optimization and cost reduction.

Participate in Continued Airworthiness projects and propose risk mitigating solutions.

University degree in Aerospace Engineering or equivalent. Specialization in Electromagnetic Compatibility and Susceptibility is required.

Have a minimum of 8 years working experience in the specialty within the Aerospace domain.

Are familiar with the relevant industry standards and best practices such as DO-160, SAE ARP, FAA regulations, as well as other applicable airworthiness regulations.

have good knowledge about FAR 25.981 regulations and fuel tank protection against lightning and static electricity
Familiarity with electromagnetic simulation / analysis tools (such as EMA3D) is a strong asset.

Have strong analytical skills.

Have team spirit, and have the ability of working in a multicultural environment.

Are self-motivated and are proactive in finding solutions to problems.

Have strong communication skills (written and spoken) in French and English.

Are able to travel.
 
Job Number: 2571
Job Location: Mirabel, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2580 - AVIONICS SYSTEMS INTEGRATOR - cv, word doc only

Description:
Responsible, as an Avionics Systems Integrator, to perform various tasks related to the development, qualification, certification and in-service support of Avionics systems on Challenger aircrafts.

Responsible for supporting investigation for in service and manufacturing issues and performing root cause analysis of Avionics systems.

Participate in the Avionics Systems architecture design to meet Aircraft Design Requirements and Objectives.

Support the Bombardier Flight Test Center in development and certification tests; witnessing of tests may be required.

Support the Final Assembly Line and In Service Aircraft for any development issues.

Manage, review and approve the deliverables of the Avionics System Suppliers.

Work with other functions & disciplines of the Challenger program to provide required information and also to collect required data to allow the Avionics design, development & certification effort to progress.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Participate in meetings and design reviews with Avionics System Suppliers and certification authorities.

Be able to travel is a must.

University degree in Electrical, Electronics, Software, or Aerospace Engineering. with at least five (5) years of relevant experience with the design, development, integration and certification of Avionics systems.

Good knowledge with the specification, design, integration, test and certification of Avionics systems on aircraft.

Must have a good knowledge of RTCA documents DO-178 and DO-160.

Must be familiar with part FAR25/525 certification process and with the ARP4754 standard.

Have an experience with civil aircraft and airworthiness authorities.

Are proficient with the use of Microsoft Office software tools to produce presentation and reports.

Have the ability to work well in a team environment.

Have strong communication skills (written and spoken).
 
Job Number: 2580
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2582 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Ateam player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).
 
Job Number: 2582
Job Location: Toronto, Canada
Rate: 55.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2584 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) ENGINEER - cv, word doc only

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical.

Support Production; respond to RNC.

Provide technical assistance to engineering staff and contribute to completion of project milestones.

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Requirements

Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Design.

Have a minimum of 15 years of relevant aerospace experience.

Must have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Are capable of interfacing with wiring diagrams, system, and EMI/EMC requirements.

Have an intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements.

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative.

Have knowledge of Catia V5.

Have an Avionic and or EWIS MRB approval knowledge and understanding, an asset.

English - French working knowledge an asset.
 
Job Number: 2584
Job Location: Canada
Rate: 61.00 US
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2587 - HYDRO-MECHANICAL ENGINEER - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with minimum 8 years of working experience.

Have a background in design, integration, development and certification of Hydro-Mechanical Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English (required).

Technical experience on the CRJ or Challenger family of aircraft is an asset.

Must have knowledge of flight-control, landing gears or hydraulic systems.

You manage various projects under strict budget and schedule requirements.

You are able to manage conflicts and solve problems.

You are self-starter, enthusiastic, well organized and customer oriented.

Must have good troubleshooting and problem resolution skills.

Must be proficient in MS Office software applications in windows (word, excel, powerpoint).

You have a background in design, integration, development and certification of Control Systems.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

Have knowledge of CATIA, Matlab, Simulink (an asset).

FUNCTIONS

Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems.

Coordinate product development activities between the supplier of the system and the affected work packages.

Ensure successful design, validation, certification and delivery of the system.

Ensure successful completion of each development phase deliverables (may author, review, approve).

Problem solve the technical issues in a cross functional environment.

Be involved in the design and integration of the system.

Review the design and documentation of all the aspects related to your system.

Check for quality of the Supplier's analyses.

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing.

Define, prepare and execute qualification and certification tests.

Work with supplier in the investigation and resolution of test findings.

Prepare or review qualification or certification reports.

Liaise with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2587
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2588 - PNEUMATICS - MECHANICAL SYSTEMS SPECIALIST - CV in 'word doc - only'

Description:
Have a Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (8) years.

Possess very good knowledge in Pneumatic and Mechanical Control Systems and their integration on the aircraft.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces integration, testing and installation.

Have a background in design, integration, development and certification of Mechanical Systems.

Previous experience in providing engineering support to a Final Line/Production would be an asset.

You have a background in design, integration, development and certification of Propulsion Systems.

Must have good knowledge of DO-160, FAR/CAR25 Regulations.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English.

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).

FUNCTION

Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Pneumatic/Mechanical Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.
 
Job Number: 2588
Job Location: Canada
Rate: 54 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2589 - DESIGN ENGINEER - CV in 'word doc - only'

Description:
Have a degree in Mechanical Engineering with eight (8) or more years of experience in a similar position.

Have experience in equipment design in an aeronautical context.

Have excellent knowledge of CATIA V5 design and modeling software.

Have a good understanding of the components, operation and installation of the various systems on board an aircraft.

Have experience in test engineering, instrumentation, engineered parts design and sheet metal parts are important assets.

Have strong sense of responsibilities, good practical and technical judgment and a high level of flexibility.

Demonstrate dynamism, good listening and a strong interest in teamwork.

Are familiar with Microsoft Office software such as PowerPoint and Excel.

Exceptional relational and editorial skills in English and French.

Membre of the Ordre des Ingénieurs du Québec (OIQ) an asset.

Essential: Registered in the Canadian Controlled Goods Directive (CGD) Program - non-US citizens nor Green Card holders or permanent resident.

FUNCTION

Perform 3D design and assembly drawings for flight test equipment for Special Mission Aircraft under the guidance of the Section Chief / Supervisor and the Senior Engineering Specialist.

Interpret the technical specifications for test and instrumentation specifications and technical requirements that meet the design criteria for your entrusted design mandates.

Ability to manage priorities in a context of parallel, multiple and complex deliveries.

Ability to work under pressure to meet design deadlines (DPS).

Find technical solutions to simplify or improve the design.

Support the manufacturing team as needed.

Work in collaboration with the experimental shop.
 
Job Number: 2589
Job Location: Canada
Rate: 51 USD
Per Diem: Paid - 3mt
Overtime: Paid - NOT at 1.5X
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Bridgewater, Virginia!

Qualifications:
HS diploma or GED equivalent required; Computer Science or Scientific Technology discipline degree preferred
3 years’ of experience with machine or sheet metal practices, with 1 year of fabrication & instillation of parts required
4 years’ total experience in aviation maintenance experience plus civilian or military aviation technical school preferred, but not required
Must have A&P License
Three years’ experience minimum either within MRO, airlines, or line maintenance environment
Must have commercial aircraft experience (717, 737-400 through 737 – 900, 757, 767, DC9)
Dash8 experience preferred, but not required
ATR 72 or SAAB 349 experience preferred, but not required
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49697
Job Location: Bridgewater, VA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is Hiring A&P Mechanics in Houston, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s, FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
Must have a minimum of 2 years CRJ 200/700/900 experience
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 44337
Job Location: Houston, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanic in Fort Worth, Texas!

Job Duties:
Perform required maintenance on company aircraft
Ensure all tasks assigned are completed in accordance with manufacturer’s manuals and FAA accepted or approved data
Adheres to all applicable FARs and Company policies and procedures outlined in the General Procedures Manual (GPM) and the Company’s,
FAA Approved Continuous Airworthiness Maintenance Program
Interpret aircraft technical manuals, and electrical drawings
Responsible for movement of aircraft in hangar and on ramp, including operation of tow-tractor
Maintain work area in a neat, clean and safe condition at all times
Perform only those tasks for which proper training and qualification has been obtained
Document On-the-job training (OJT) on from (T#004) for training received on tasks which Mechanic/Repairmen has not previously performed
Perform other duties as assigned
Qualifications:
Hold a Mechanic’s Certificate with Airframe and Powerplant ratings
Meet requirements of 14 CFR Part 65.83
Familiar with parameters and standards established specifically in Federal Aviation Regulations, Parts 53, 65 and 91
Familiar with basic inventory management functions
Strong interpersonal skills and ability to work harmoniously with others
Familiar with computer data entry, and Microsoft Windows based programs
Capable of lifting 75 lbs
Able to work flexible schedule to include day and night shifts
Willing to travel as needed
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48131 / 44189
Job Location: Fort Worth, TX
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services now offers A&P Mechanic jobs in Rockford, Illinois!

Job Duties:
The A&P mechanic services, troubleshoots, repairs, modifies, preserves, maintains, and overhauls aircraft, aircraft systems, and aircraft components in accordance with policies, procedures, requirements, and specifications established by the employer, aircraft manufacturers, and FAA as contained in approved maintenance manuals.
Qualifications:
Looking for a minimum of 3 years experience on any turbine aircraft. They work anything from Cessna Caravan’s to Embraer 175’s.
What We Offer:
STS Technical Services works with the largest names in the aviation industry, offering hundreds of career opportunities across the United States. With over two decades of experience, we soar in our commitment to excellence and professionalism. We proudly offer competitive rates, direct deposits, medical insurance, cash advances, and referral bonuses.

If you would like to speak with an Aviation Recruitment Professional directly, call 1-800-359-4787. Our job placement services are always free, and we are open seven days a week. Reach out at any time! Thanks so much for your interest in working with STS Technical Services, and we look forward to speaking with you soon.
 
Job Number: 49852
Job Location: Rockford, IL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Minneapolis, Minnesota!

Job Description:
Inspect, test, repair, maintain, and service aircraft.
Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components
Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications
Perform visual inspections during assembly of part and after repair or installation of component.
Perform operational checks after maintenance is performed to ensure proper operation.
Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks
Disassemble and inspect parts for wear, warping, or other defects
Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools.
Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment
Test engine and system operations, using testing equipment
Service and maintain aircraft systems.
Perform maintenance IAW FAA approved technical data
Research FAA technical data to locate applicable data relevant to assigned tasks
Other duties may be assigned
A&P Mechanic Job Requirements:
FAA Airframe and Powerplant license
Must have 3-5 years experience within commercial aviation
Must be able to read and write English and be able to comprehend and apply information contained in technical manuals
Must be able to document maintenance performed on required forms
Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models
Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)
Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines.
Practice safety conscious behaviors in all operational processes and procedures
High School Diploma or equivalent
Successfully complete a fingerprint-based Criminal History Records check prior to beginning work
Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds
Must be willing to work rotating or fixed shifts
A valid clear driver’s license
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49021
Job Location: Minneapolis, MN
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
STS Technical Services is hiring A&P Mechanics in Allentown, Pennsylvania.

Duties & Responsibilities:
Technicians working on aircraft, components or related parts of aircraft are responsible to perform work outlined on applicable work forms in accordance with airlines policies and procedures, manufacturer’s manuals and FAA requirements.
Overhaul, maintenance, and repair of airframe components, power plants, aircraft communication, navigation equipment, and associated components in accordance with airlines manuals, manufacturer’s manuals, bulletins, and orders.
Ensure that the appropriate tag is attached to all parts removed from an aircraft in accordance with Airlines policy.
The Technician, in performing his or her duties is required to be constantly alert for defective, worn or failed parts as well as safe working conditions.
Proper execution of an Airworthiness Release.
Responsible to sign for the accomplishment of work on applicable work forms and records.
A Technician, when qualified, may be required to perform the duties of Inspector in accordance with the Inspector job classification as described in the manual.
Responsible to keep the work area in a clean, safe and orderly manner.
Will be assigned to such housekeeping duties as policing his or her work and/or repair area as well as maintenance of company property.
Process all necessary paperwork as mandated by regulation.
Qualifications:
FAA certified Airframe and Powerplant (A&P) who perform direct maintenance in accordance with Airlines Continuous Aircraft Maintenance Program (CAMP).
Airbus GEN FAM’s “Highly preferred”
Must be authorized to work in the US as defined by the Immigration Act of 1986.
Must pass a Criminal Background Check.
High School Diploma/GEDValid Airframe & Powerplant Certification (A&P)
Minimum two (2) years of experience in aircraft maintenance for Part 121 environments.
Must have a valid Driver’s License and clean driving record.
Sponsorship is not available for this role.
Effective Communication skills, both verbal and written.
Proficiency with Microsoft Office Word and Outlook email.
Airbus experience and Airbus GEN FAMs.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49796
Job Location: Allentown, PA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
APG Mechanic / C-130 - no clearance URGENT SC

Description:
166686
Job Title: APG Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2465-1
Max Pay Rate: $33.83/hr
Start Date: 11/4/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of mechanical duties involving diagnosis of malfunctions and required maintenance, disassembly, rework, repair, replacement, re-assembly or adjustment of various aircraft systems in accordance with technical specifications, engineering instructions, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience


Skills: Category Name Required Importance Experience
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 2 positions
 
Job Number: JEG-2465-1
Job Location: Greenville, SC
Rate: 33.38/hr max
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST be able to obtain a Secret Clearance****

Job Description:
1. The candidate selected must have demonstrated complete understanding and wide application of mass properties technical principles, theories and concepts and possess a general knowledge of other related disciplines and their relationship and impacts on weight, center of gravity, and inertia.
2. The candidate selected will represent the Mass Properties Management and Control organization for various airframe and systems related configuration change studies.
3. The candidate must exhibit the ability to provide imaginative, thorough, and practicable solutions to a wide range of difficult mass properties / weight management and control problems that are consistent with program objectives.
4. The candidate will use ongoing analysis to assure approved changes are fully reflected in aircraft level predictions.
5. The candidate must display an ability to work independently under general direction to meet program objectives.

Basic Qualifications:
1. Experience using a relational database
2. CATIA--Computer Aided Application
3. VAS--Visualization Assembly System
4. Strong SQL use and development skills
5. Strong Visual Basic or C++ use and development skills
6. SAWE RP8 use
7. Earned Value Management Systems (EVMS)
8. Strong technical leadership skills
9. Strong personal and presentation communication
10. Experience with engineering change requests/packages
11. Experience incorporating engineering design changes into a mass properties database system

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11708
Job Location: Fort Worth, TX
Rate: $57.48/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. The most recent investigation completed within the last 5-years****

Job Description:
1. Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.
2. Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations.
3. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations.
4. Will work production floor support from receipt of problem, coordination of answer to release of engineering change.
5. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight.
6. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Education:
- Level 4: BS+16 YRS or MS+14 YRS
- Position will also require 2+ years MRB experience w/ metallic airframe
 
Job Number: 11583
Job Location: Palmdale, CA
Rate: $90.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer - Clearance CA

Description:
166409 Job Title: Aeronautical Engineer


Work Site Address: Palmdale, CA 93599
Job Number: 2071-1
Max Pay Rate: $80.00/hr
Start Date: 10/8/2019
End Date: 1/20/2020
Position Type: Contract


Job Summary:
Candidate will be responsible for testing and developing data structures to assure accurate testing of Design and Support of the production and flight test fluid conveyance routing and installation, Electrical Wire Harness Installation and Equipment Installation and structural design.

Verify the aerosource tool will support shop floor, flight line, and off-site aircraft build and operations. Will support validation that aerosource will allow for data management in the areas of creating layouts, creating new drawings and revising existing drawings using CATIA V5 to support aircraft fluid systems installations, harness installations and equipment installations. Will work production floor support from receipt of problem, coordination of answer to release of engineering change. Designs, develops, and tests a variety of power plants, aircraft, missiles, and parts, taking into consideration the most efficient use of the natural laws affecting flight. Establishes structural specifications, performs stress analysis, and conducts performance tests.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
Position will require 2+ years MRB experience w/ metallic airframe

Qty 1 position
 
Job Number: JE-2071-1S
Job Location: Palmdale, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 3 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer / Mass Properties - no clearance TX

Description:
166555 Job Title: Aeronautical Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2226-1
Max Pay Rate: $56.20/hr M
Start Date: 12/2/2019
End Date: 12/31/2020
Position Type: Contract

Job Summary:
The candidate selected will represent the Mass Properties Management and Control organization for various airframe and systems related configuration change studies.

The candidate selected must have demonstrated complete understanding and wide application of mass properties technical principles, theories and concepts and possess a general knowledge of other related disciplines and their relationship and impacts on weight, center of gravity, and inertia.

The candidate must exhibit the ability to provide imaginative, thorough, and practicable solutions to a wide range of difficult mass properties / weight management and control problems that are consistent with program objectives. The candidate will use ongoing analysis to assure approved changes are fully reflected in aircraft level predictions. The candidate must display an ability to work independently under general direction to meet program objectives.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Experience using a relational database
CATIA--Computer Aided Application
VAS--Visualization Assembly System
Strong SQL use and development skills
Strong Visual Basic or C++ use and development skills
SAWE RP8 use
Earned Value Management Systems (EVMS)
Strong technical leadership skills
Strong personal and presentation communication
Experience with engineering change requests/packages
Experience incorporating engineering design changes into a mass properties database system


Qty 1 position
 
Job Number: JE-2226-1
Job Location: Fort Worth, TX
Rate: 56.20/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Air Data Systems Engineer

Description:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the technology roadmap
• Provide validation and verification of air data systems requirements


We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance


We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

The Structures Company is AA/EOE.
 
Job Number: 324
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Door Design Engineer

Description:
General Summary:
Engineer, Doors Design is responsible for the conceptual design and production engineering of Aircraft Doors structural and system components. The candidate will be responsible for conceptual layout, detailed design and aircraft production & in-service design and modification.

Duties and Responsibilities:
1. Generates Engineering Models and Drawings utilizing CATIA Version 5.
2. Performs trade studies to identify optimal engineering solution.
3. Collaborates with the Integrated Product Team to resolve cross functional issues.
4. Reviews work performed by others and ensure work is to the highest standard.
5. Implements Industry best engineering practices (design for manufacturing, design for reliability and design for maintainability).
6. Have the ability to understand and apply certification requirements.
7. Implement design solutions optimized for cost and weight.
8. Manages task execution to ensure on-time and on-target completion.
9. Utilizes drafting and Geometrical Dimensioning &Tolerancing knowledge to optimize part design for cost and functionality.
10. Searches for problem root cause and develop corrective action plans and solutions.
11. Serves as an interface within the Doors Engineering group to ensure effective communication, coordination, and timely completion of project milestones.
12. Leads or participates in design / development reviews with management and internal customers. The candidate must have the ability to deliver technical presentations effectively to a diverse and demanding audience.

Education, Work Experience, Certification and/or Licensure:

1. BS in Mechanical Engineering with a minimum of 10 years directly related experience designing aviation systems; experience can be substituted for the lack of an appropriate degree
2. Some Travel may be required

Knowledge, Skills and Abilities:
1. Proficient in use of CATIA Version 5.
2. Advanced knowledge of drafting rules.
3. Advanced knowledge of Geometrical Dimensioning and Tolerancing.
4. Proficient in Microsoft Office Products.
5. Use of Team Center.
6. Familiar with FAR Part 23 or Part 25.
7. Functional knowledge of SAP.



The Structures Company is an AA/EOE.
 
Job Number: 321
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painter - no clearance SC

Description:
166698
Job Title: Aircraft Painter

Work Site Address: Greenville, SC 29605
Job Number: 2516-1
Max Pay Rate: $29.00/hr
Start Date: 11/4/2019
End Date: 6/29/2020
Position Type: Contract

Job Summary:
Coats surfaces of aircraft with paint, Polyurethane, lacquer, epoxy, resin or other material, using brushes, rollers, spray guns and other devices, removes old paint from aircraft, using liquid paint remover and scraper.

Smoothes surface with sandpaper and steel wool, roughens aluminum surfaces with acid solution and steel wool to insure that paint adheres to surface, masks and covers portions of surfaces not to be painted, and applies markings to include minor and major markings using stencil materials, insignia, letters, or numerals, on aircraft surface, using stencils.

Qualifications and Education Requirements
Ability to operate snorkel and scissor lifts.

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Paint Process No 1 2 - 4 Years

Qty 2 positions
Manager asked to please inform candidates that the LM facility closes for Christmas break.
 
Job Number: JEG-2516-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Kennesaw, Georgia.

Duties & Responsibilities:
Responsible for the finished Quality of parts and a limited number of frames.
Applies coats of paint to protect interior or exterior surfaces, of tractors and belt-loaders.
Selects premixed paints or mixes required portions of pigment, oil, thinning and drying substances to prepare paint that matches specified colors.
Paints surfaces and maintains spray equipment, spray gun and conventional spray gun and HVLP equipment.
Must have specific knowledge of paints (urethane and wash primers), thinners, spray guns, vic systems.
Knowledge of proper cleaning and rebuilding of guns, proper air pressures for product uses, understanding of work orders.
Occasionally required to operate air powered hand tools and common mechanics hand tools to perform some assembly operation essential functions.
Qualifications:
High School diploma or GED required 2 years related experience preferred
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 48481
Job Location: Kennesaw, GA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Painters

Description:
STS Technical Services is hiring Aircraft Painters in Lake Charles, Louisiana.

Duties & Responsibilities:
Works as direct labor on aircraft and is safety sensitive position.
Must be capable, and have mastery of, all processes associated with prepping and painting aircraft.
Ensure company Environmental Health and Safety policies are upheld.
Perform all aircraft painting processes on aircraft.
Aircraft stripping mastery.
Aircraft sanding mastery.
Aircraft masking mastery.
Aircraft painting mastery
Aircraft detail and mx markings mastery
Aircraft layout and sign-boards mastery
Report to work on time on scheduled shifts to work
Maintain 5S principles of Sorting, Systematic Arrangement, Shining, Standardizing and Sustaining with heavy emphasis on housekeeping of the aircraft maintenance bays, consumable point of use tables, tool room and paint mix areas
Qualifications:
Minimum of 2 years’ experience as an Apprentice Painter.
Candidates with 5 years+ commercial painting experience are considered master level painters.
Must be expert level boom lift and scissor lift operator.
Ability to travel as required.
Ability to read and write English.
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49819
Job Location: Lake Charles, LA
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Stress Engineer Openings

Description:
Aircraft Stress Engineers needed.
MUST BE US PERSONS.
BS Degree a MUST.
FEMAP is a plus but not required.
Strong classical analysis/hand calcs a MUST.

REQUIRED SKILLS AND ABILITIES:
1. Familiarity with Federal Aviation Regulations (FARs) governing aircraft certification.
2. Strong understanding of aircraft structural modifications (both interior and airframe).
3. Strong command of classical hand-analysis techniques.
4. Proficient with the following software:
a. Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
b. NASTRAN/FEMAP(basic user skill, proficiency a plus)
c. AutoCAD (basic user skill, proficiency a plus)
d. SolidWorks (basic user skill, proficiency a plus)
e. Visual Basic or other coding skills a plus
Final 1-2017
5. Strong knowledge of Finite Element Modeling and Analysis techniques.
6. Ability to interpret design drawings of various aircraft modifications and identify design changes required to
ensure that sound load paths and structural integrity are maintained.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Aerospace, Aeronautical, or Mechanical Engineering or the equivalent.
2. Five (5) or more years of experience working in aircraft stress analysis - airframe or interiors/completions on transport category aircraft, installation designs, including but not limited to Supplemental Type Certificate (STC) work, structural
substantiation analysis and report development, aircraft modification designs under 14 CFR Part 25 STC
projects, and test plans and test report authoring and review.

The Structures Company LLC is an AA/EOE.
 
Job Location: IN
Rate: Open / DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Aircraft Stress Engineers

Description:
Nastran, Patran a plus
 
Job Location: GA/WI
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician - no clearance URGENT SC

Description:
166688 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2464-1
Max Pay Rate: $29.50/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions.

Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions.

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 1 2 - 4 Years
Areas of Expertise C-130H No 1 2 - 4 Years

Qty 8 positions
This is an URGENT request.
 
Job Number: JEG-2464-1
Job Location: Greenville, SC
Rate: 29.50/hr max
Duration: 8 months plus extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / C-130 - no clearance URGENT URGENT URGENT SC

Description:
166338 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 2095-1
Max Pay Rate: $29.00/hr
Start Date: 10/7/2019
End Date: 1/31/2020
Position Type: Contract

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE

Job Description:
Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft. Essential Functions (Other duties may be assigned as required)
• Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
• Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
• Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.
• Experienced in troubleshooting and flight line operations a must

HIRING MANAGER WILL CONSIDER ANY CANDIDATE WITH ANY C-130 EXPERIENCE



Qualifications and Education Requirements
Needs to be really experienced in troubleshooting and flight line operations

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise C-130J Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting No 2 4 - 6 Years

Qty 1 position needed
 
Job Number: JEG-2095-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 3 -18 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic Technician / C-130 desired - no clearance SC

Description:
165856/1895-1
Avionic Technician
Greenville, SC 29605
29/hr max

Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, engineering drawings and written or verbal instructions. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Installs wire harnesses in aircraft to include routing and termination.

Areas of Expertise C-130 No 1 4 - 6 Years

Qty 5 positions needed
Candidate must have previous aircraft modification experience. Installs wire harnesses in aircraft to include routing and termination.
 
Job Number: JEG-1895-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****Candidate can start without a Secret Clearance, but must be able to obtain a Secret Clearance ****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in Aerospace Engineering, System Engineering, Computer Science, Electrical Engineering, Mechanical Engineering or related technical degree.
2. Experience working electro-optic (EO) systems.

Desired Skills:
1. Active F-22 Project Clearance desired.
2. The selected candidate will be assigned to the F-16/F-22 Integrated Fighter Group's (IFG) Sensors & Weapons team supporting the integration of electro-optic (EO) systems--including targeting, reconnaissance, and terrain-following pods--on F-16 aircraft.
3. The candidate will assist in the development, integration, and testing of said systems as well as develop test procedures and document interfaces.
4. The selected candidate will interface and coordinate with suppliers, program management, and other subsystem engineers to support program cost, schedule, quality, technical goals, and requirements.
5. The selected candidate will also participate in solving technical problems, subcontract planning, and risk management.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11703
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelor's degree in technical discipline
2. Experience with Aircraft Avionics systems

Desired Skills:
1. Active F-22 Projects Clearance
2. Experience presenting
3. Experience with customer interaction
4. Experience with AGILE
5. Diligent at maintaining relevant members apprised of task status
6. Experience with Microsoft Office tools (i.e. Excel, Outlook, and PowerPoint)

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11705
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education.
Experience with aircraft systems

Desired Skills:
1. Experienced in design, development, integration and test of datalink systems.
2. Familiar with DoD contracting and product acquisition.

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11681
Job Location: Fort Worth, TX
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Job Qualifications:
1. Experience with Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
2. Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
3. Experience with the verification and sell off of a subsystem to a customer through formal test events.
4. Experience developing subsystem design/engineering documentation.
5. Experience with Agile Software Development and/or SCRUM processes.
6. Strong oral written communication skills
7. Strong interpersonal and collaboration skills
8. Strong work ethic and self-motivation
9. Strong Interpersonal & Collaboration Skills
10. Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications; excellent oral and written communication skills and analytical skills.
11. Needs to have the ability to convey technical data and concepts in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11680
Job Location: Fort Worth, TX
Rate: $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelors degree in Software/Electrical/Electronic Engineering or related technical degree.
2. Experience with developing and delivering software

Desired Skills:
1. Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
2. Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
3. An understanding of the build, integration, and test processes
4. The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11627
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS Electrical, Computer Engineering or related technical degree from an accredited college.
2. Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
3. Open System Architecture (OSA) hardware experience
4. Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired Skills:
1. Active F-22 Project Clearances
2. Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
3. System performance monitoring and evaluation experience.
4. Electrical troubleshooting skills.
5. Experience with Test and Measurement Equipment
6. Scaled Agile Framework methodology
7. Software development experience
8. Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
9. Excellent oral and written communication skills and analytical skills.
10. Needs to have the ability to convey technical data and concepts in concise messages and presentations.
11. Technical leadership skills a plus

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11626
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired Skills:
1. MATLAB and/or C++ for analysis tool development
2. Familiarity with JSF avionics suite and systems engineering processes.
3. Familiarity with data analysis tools (e.g. Matlab)
4. Familiarity with JSF tools including SIMS and Dimensions
5. Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
6. Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
7. Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11628
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. Bachelor's degree in a related technical field
2. Experience with mission systems/avionics

Desired Skills:
1. Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
2. Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
3. Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
4. Prior supplier management experiences a plus.
5. Familiarity with JSF toolsets: SIMS & PDM.
6. Current F-35 program experience and clearances.
7. Must be able to acquire a SAR clearance.
8. CNI, Radar, EW, or related avionics functions technology, and product development experience.
9. Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11623
Job Location: Fort Worth, TX
Rate: $63.67/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years****

Job Description:
1. Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
2. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Basic Qualifications:
1. BS in technical discipline and at least one year professional experience
2. Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired Skills:
1. Knowledge of RF, EW and/or CNI
2. Ability to understand and apply electronics engineering principles to development
3. Experience developing subsystem design/engineering documentation.
4. A working knowledge of tools for requirements and verification Traceability.
5. Experience with Agile Methodology
6. Ability to work with suppliers to generate verification and validation plans
7. Strong oral written communication skills
8. Strong interpersonal and collaboration skills
9. Strong work ethic and self-motivation

Education:
1. Level 1: BS+0-3 YRS
 
Job Number: 11625
Job Location: Fort Worth, TX
Rate: $67.21/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / F-16 datalink systems / integration test- Clearance TX

Description:
166533 Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2183-1
Max Pay Rate: $70.00/hr
Start Date: 10/22/2019
End Date: 1/22/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Exp w/ Aircraft Avionics systems and/or the F-16 datalink systems (i.e., IDM, Link 16, MIDS).
Familiarity with Avionics systems, Vehicle systems & the systems supporting integration & test and debug.
Experience with the verification and sell off of a subsystem to a customer through formal test events.
Experience developing subsystem design/engineering documentation.
Experience with Agile Software Development and/or SCRUM processes.
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation
Strong Interpersonal & Collaboration Skills
Proficient with MS Office products including Excel spreadsheet, scheduling and Database applications
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.


Qty 1 position
 
Job Number: JE-2183-1S
Job Location: Fort Worth, TX
Rate: 70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166418
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2148-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
BS Electrical, Computer Engineering or related technical degree from an accredited college.

Basic Qualifications
BS Electrical, Computer Engineering or related technical degree from an accredited college.
Familiarity with Aircraft Avionics systems and the F-22 communication subsystem
Open System Architecture (OSA) hardware experience
Knowledge of Commercial off the shelf (COTS) hardware and implementation

Desired skills
Active F-22 Project Clearances
Familiarity with F-22 Avionics systems, F-22 Vehicle systems and the systems supporting integration and test.
System performance monitoring and evaluation experience.
Electrical troubleshooting skills.
Experience with Test and Measurement Equipment
Scaled Agile Framework methodology
Software development experience
Proficient with Microsoft Office products including Excel spreadsheet, scheduling and Database applications;
Excellent oral and written communication skills and analytical skills.
Needs to have the ability to convey technical data and concepts in concise messages and presentations.
Technical leadership skills a plus

Qty 1 position
 
Job Number: JE-2148-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer / avionics flight control systems - Clearance TX

Description:
166422
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2146-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Basic Qualifications
- Bachelors degree in Software/Electrical/Electronics Engineering or related technical degree.
- Experience with developing and delivering software
Desired skills
- Experience with fixed wing aircraft datalink and
Communication/Navigation/Identifications systems.
- Program management experience including; planning, scheduling, EVMS, risk management, configuration management and problem resolution
- An understanding of the build, integration, and test processes
- The ability to build and maintain effective working - relationships with customers, suppliers, peers and partners.

Qty 1 position
 
Job Number: JE-2146-1S
Job Location: Fort Worth, TX
Rate: 62/hr
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166417
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2147-1
Max Pay Rate: $65.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.
Job Description: Should NOT include client name, rates or security clearance requirements. What is provided here WILL be on the Job Board
Roles and Responsibilities
Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+0-3 YRS
Basic Qualifications
BS in technical discipline and at least one year professional experience
Familiarity with Aircraft Avionics systems and/or Mission Systems subsystem

Desired skills
Knowledge of RF, EW and/or CNI
Ability to understand and apply electronics engineering principles to development
Experience developing subsystem design/engineering documentation.
A working knowledge of tools for requirements and verification Traceability.
Experience with Agile Methodology
Ability to work with suppliers to generate verification and validation plans
Strong oral written communication skills
Strong interpersonal and collaboration skills
Strong work ethic and self-motivation

Qty 1 position
 
Job Number: JE-2147-1S
Job Location: Fort Worth, TX
Rate: 65/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166435
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2137-1
Max Pay Rate: $62.00/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract


Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Experience in Electronic Warfare operations, implementation, or aircraft integration

Desired skills
• MATLAB and/or C++ for analysis tool development
• Familiarity with JSF avionics suite and systems engineering processes.
• Familiarity with data analysis tools (e.g. Matlab)
• Familiarity with JSF tools including SIMS and Dimensions
• Familiarity with the F-35 Mission Systems design of Radar, Electronic Warfare / Countermeasures, and Fusion.
• Microsoft Office products including Excel spreadsheet, scheduling and Database applications experience
• Good oral and written communication skills and have the ability to convey technical data in concise messages and presentations

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ No 1
Software Skills Matlab No 1


Qty 2 positions
 
Job Number: JE-2137-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer - Clearance TX

Description:
166415
Job Title: Avionics Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2084-1
Max Pay Rate: $62.26/hr
Start Date: 11/5/2019
End Date: 2/5/2021
Position Type: Contract

Job Summary:
Supports development, design, integration and test function of Avionics/flight control systems, including electronics, SW, hydraulics, etc.

Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

CNI, Radar, EW, or related avionics functions technology, and product development experience.
Must be able to travel a moderate amount domestically to subcontractor and US government facilities in support of subsystem development and test.

Basic Qualifications
Bachelor's degree in a related technical field
Experience with mission systems/avionics

Desired skills
Knowledge of integrated CNI systems (e.g., F-35 or F-22), INS, and/or GPS concepts, operations, implementation, aircraft integration, and usage.
Knowledge of CNI functions (voice radios, data links, Link 16, TACAN, IFF, crypto).
Experience in RF and/or CNI systems, Integration & Test, flight test, data analysis.
Prior supplier management experience a plus.
Familiarity with JSF toolsets: SIMS & PDM.
Current F-35 program experience and clearances.

Qty 2 positions
 
Job Number: JE-2084-1S
Job Location: Fort Worth, TX
Rate: 62/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technician

Description:
MUST have 4+ years of line troubleshooting and
installation experience on general aviation aircraft,
Cessna, Cirrus SR-22, Pilatus PC-12, Piper,
Beechcraft, King Air models. Must
have experience troubleshooting/installing Garmin,
Avidyne, Aspen, PS Engineering, Appareo/Stratus,
L3 avionics equipment and ADS-B equipment.
This position will be responsible for the technician/installer to perform troubleshooting, modifications
and upgrades of avionics systems on customer aircraft. All maintenance will be accomplished in
accordance with the rules and regulations set forth by the FAA and our customer.
Must have experience troubleshooting/installing Garmin, Avidyne, Aspen, PS Engineering,
Appareo/Stratus avionics equipment and ADS-B equipment. Must be capable and
knowledgeable to perform 91.411 and 91.413 inspection
 
Job Location: Kalispell, MT
Duration: Permanent
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: SEZ AEROSPACE USA LLC
Attention: Kane
Address: 1775 9TH ST
City, State: MOBILE, AL 36522
Phone: 251/438-6865
Website: www.sezaerospaceusallc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Structural Design Engineer Openings

Description:
Design and configuration of composite primary aircraft structure.
Experience during preliminary/conceptual design phase required.
Support of subsystems integration and packaging into primary structure.
Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry.
Analyze the applicability of new and emerging technologies and advanced techniques.
Serve as a design focal between the program and Tier 1 suppliers.
Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements.
Support new business development, trade studies and proposal activities.
Support technical review of supplier capabilities and progress.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
8+ years of experience in performing design of large aerospace structures.
Strong composite structural design background.
Proficiency with CATIA V5 and Teamcenter PLM is preferred.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Thorough understanding of the structural design requirements for Part 25 certification is preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician (20+ openings)

Description:
Job Description
Come work for a great company with great benefits! We need guys for all shifts (weekends, nights, days, holidays). Six to eight-month contract with the potential of converting to a permanent employee. Aerospace experience preferred.
Composites fabrication & sub-assembly:
• Fabrication of parts using wet layup and pre-impregnated composite materials
• Knowledge of properly preparing tooling for layup (Clean, seal, release)
• Placement and consolidation of composite materials in tooling
• Grinding, cutting, and trimming of parts
• Working knowledge of composite specific equipment including ovens, Gerber cutting machines, and Virtek laser computers.
• Bonding composite structures
• Hand-finishing parts to proper fitment
• Wet layup with multiple resin systems and fabrics
• Locating parts and creating fixtures to blueprints and / or engineering instructions
• Attention to detail and ability to self-inspect work to ensure quality defects are mitigated
Required:
• 3+ years of experience with composites or aircraft fabrication and assembly preferred.
• Flexible to work overtime/modified/Non-standard shifts preferred
• 5S/FOD/Tool control programs mandatory
• Ability to perform repairs on composite structures
• Experienced with quality inspection points and process documentation.
• Knowledge of resins, mixing, ratios, and paste mixes.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms
Job Type: Full-time
Salary: $16.00 to $45.00 /hour
 
Job Location: Mojave, CA
Rate: 16-40/hr
Per Diem: Yes
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Configuration Management Specialist

Description:
**Prefer someone direct for this role, but will consider a contractor.**

Required skills:
• Configuration Management experience required
• Experience with Airbus is a plus
• Experience with “change boards” required
• Experience with SmarTeam required.
• BS degree required
• Background utilizing DOORS is a plus
• Combination of responsibilities/duties related to configuration of the product. This role has responsibility to ensure everyone understands processes and program goals. Training others may be periodically required to ensure compliance.
• Ensure that milestones and deliverables are met
• Ensure that all organizations are working together
• Deliver product to the same objectives with the same quality standards and expectations.




Job Description:
Applies extensive knowledge of principles, theories, concepts and industry practices to
plan, direct, and coordinate the engineering design, integration, analysis and certification of company products and processes for manufacturing of complete aircraft parts, components, subsystems and complete systems for operational aircraft.

Formal Education, Training, Professional Certification and Work Experience:
Bachelor degree in an appropriate discipline from an accredited four-year college or university and five (5) or more years related experience and/or training.



The Structures Company is an AA/EOE.
 
Job Number: 354
Job Location: Tulsa, OK
Rate: $110K **DOE**
Duration: DIRECT/FULL-TIME POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6+ Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.


Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.


Skill Code: 622-Electrical Systems Design
 
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design and Analysis Engineer 5

Description:
Design and Analysis Engineer 5

Location: Oklahoma City, OK
Duration: 6 Months

Description:
Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects. Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications. Leads testing and validation work on complex system designs to assure that operational and functional requirements are met. Works with other to develop program test strategies. Manages performance of critical suppliers to ensure system integration and compliance with requirements. Conducts program independent reviews and reports results to program leadership. Provides critical support of fielded hardware and software over the entire product lifecycle. Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments. Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.

OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for client Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

This position provides an excellent opportunity to develop new solutions, help grow and mentor the next generation of engineers, and guide the candidates’ career towards the submittal of a candidacy for a position in the Technical Fellowship.

Other job responsibilities may include:
- Leads work with customers to develop and document electronic and electrical system requirements on complex multi-tiered projects.
- Leads analysis and translation of complex requirements into system architecture, hardware and software designs and interface specifications.
- Leads testing and validation work on complex system designs to assure that operational and functional requirements are met.
- Works with other to develop program test strategies.
- Manages performance of critical suppliers to ensure system integration and compliance with requirements.
- Conducts program independent reviews and reports results to program leadership.
- Provides critical support of fielded hardware and software over the entire product lifecycle.
- Leads research into technology advances for potential application to company business needs. Makes recommendations for technology investments.
- Recognized as a business unit-wide expert in process development and qualification, physical and functional integration and installation design and resolving supplier technical issues.
- Works under consultative mentorship.

Basic Qualifications (Required Skills and Experience)
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Must possess good organizational, interpersonal, and problem-solving skills. Must have demonstrated a strong work ethic and sense of urgency for completing assigned work with a history of meeting commitments. Ability to adjust priorities to multiple demands and unanticipated events.

Highly motivated and must work well in a team environment. The ability to communicate effectively, both verbally and in writing

Education / Experience:
Bachelor's degree with 14 or more years' experience, Master's degree with 12 or more years' experience or PhD with 9 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Skill Code: 622-Electrical Systems Design
 
Job Number: 19-15064
Job Location: Oklahoma City, OK
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: Immediately
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS or Bleed Air Systems Design Engineer

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.
4. Work in a team environment supporting liaison engineering to research root cause and address production discrepancies.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.




The Structures Company is an AA/EOE.
 
Job Number: 301
Job Location: NC
Rate: $55-$60/Hr - **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Analysis Engineer

Description:
Electrical Design and Analysis Engineer
Job ID # 2019-10255
Contract Opportunity
Location: Oklahoma City, Ok
Industry: Aerospace & Defense
Clearance Requirement: Ability to Obtain – Top Secret
Minimum Education: Bachelor’s Degree
Minimum Experience: 2 years

What You’ll Do:
• Experienced Electrical Circuit Design Engineer.
• Maintain detailed requirements and specifications for various electronic products.
• Develop detailed designs of limited scope.
• Conduct various methods of testing and analysis to support design.
• Gather data for technical performance measures and performs basic analysis.
• Provide basic engineering support throughout the lifecycle of the product.
• Conduct trade studies and literature research to support future product designs.
• Work under general supervision.
• Mentor and coach lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers.
• Provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (B-52, B-1B, B-2, AEW&C, AWACS, and others) and diverse projects.
• Assignments will provide an excellent opportunity to learn aircraft circuit design on the various platforms.
• Assignments may deal with
• Reviewing supplier and partner qualification data.
• Circuit Analysis/Layout/Design/Manufacturing.
• FPGA design/development/integration.
• Perform Trade Studies/Modeling.
• Cross-functional coordination and integration.
• Develop Design Requirements and Plans.
• Provide Engineering Support to Supplier Management Procurement Activities.
• Perform Engineering Investigations and Troubleshooting Efforts.
• Develop and perform Acceptance Test Procedures.
• Test Automation for aircraft modifications.
• Other job responsibilities may include
• Analyze customer and system requirements to develop basic architectural approaches and detailed specifications for various electronic products.
• Develop high-level and detailed designs consistent with requirements and specifications.
• Validate designs through various methods of review, testing and analysis.
• Identify, track and status technical performance measures to measure progress and ensure compliance with requirements.
• Support Supplier Management with make/buy recommendations and other technical services of limited scope.
• Provide engineering support throughout the lifecycle of the product.
• Investigate emerging technologies to develop concepts for future product designs to meet projected requirements.

What You’ll Need:
• This position requires the ability to obtain a Top Secret Security Clearance at the time of hire.
• Must be willing and able to travel up to 25% of the time.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Bachelor's Degree and typically 2+ years of experience in an engineering classification or a Master's degree with experience in an engineering classification.
• Required: Bachelor or Master Degree from an accredited course of study, in engineering, com

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10255
Job Location: Oklahoma City, Okalahoma
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - no clearance SC

Description:
164638/1659-1 Electrical Engineer
Need Date: A.S.A.P
Number of Openings 1
Length of Assignment Estimated one (1) year
Hourly Pay Rate: $58
Possible Temp to Hire? No
Shift, Start & End Time 1st: 0630-1600
Specific Work Location Greenville, SC



Job Description:
Greenville Operations, SC is currently looking to fill an Electrical Engineer position within the Design & Integration skill set to support an Avionics Upgrade (CNS/ATM) project.

The ideal candidate will be responsible for providing electrical engineering avionics designs in support of CNS/ATM upgrade on a C-130H aircraft. This includes development/design of block diagrams, wiring diagrams, and cable assemblies for avionics system installations. Experience developing ground and flight test procedures and assisting the production team as required during installation and test is also required.

Minimum Requirements:
(Education, years of experience, specific skills or tools, etc.)
• Bachelor's Degree in Electrical Engineering or equivalent design experience with at least 10 years of electrical design.

• Must be experienced with Engineering design software for electrical design.

• Ability to understand schematics, generate interconnect diagrams and troubleshoot equipment installations.

• Experience with aircraft architectures and electrical integration of avionics subsystems.
 
Job Number: JEG -1659-1
Job Location: Greenville, SC
Rate: 58/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Integration Engineer

Description:
POSITION SUMMARY:
The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Provide engineering design and analysis of electrical systems and components.
2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
4. Work experience with EWIS standard design and wire separation requirements.
5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
11. Develops and implements engineering modifications and retrofits to completions in progress.
12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
14. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

REQUIRED SKILLS AND ABILITIES:
1. Proficient with SolidWorks.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
4. Aviation background and experience with electrical systems.
5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
6. Strong knowledge of industry electrical systems and documentation standards.
7. Experience with electrical systems and components.
8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
9. Requires reasoning/analytical skills to creatively design and problem solve.
10. Strong communication and problem-solving skills.
11. Strong time-management and organizational skills.




The Structures Company is an AA/EOE.
 
Job Number: 347
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Design Engineer

Description:
OKC Electrical Power Group is seeking senior electrical power engineers. The candidate will mentor, coach and lead lesser experience engineers providing knowledge transfer to aid in growing our next generation of engineers. The candidate will provide engineering and technical decisions for Military Aircraft, Military Derivative Aircraft (AEW&C, AWACS, C-32/C-40, E-4B, VC-25A, KC-767, B-1B, B-2, B-52 and others) and diverse projects. Assignments will provide an excellent opportunity to learn aircraft power systems on the various platforms.

Other job responsibilities may include
• Leads work with customers to develop and document complex electronic and electrical system requirements.
• Leads and coordinates work to analyze and translate requirements into system architecture, hardware and software designs and interface specifications.
• Leads work to test and validate to ensure system designs meet operational and functional requirements.
• Oversees the team that monitors supplier performance to ensure system integration and compliance with requirements.
• Solves problems concerning and provides other support of fielded hardware and software over the entire product lifecycle.
• Researches technology advances for potential application to company business needs.
• Makes recommendations for technology investments.
• Works under minimal mentorship.
 
Job Number: ESDE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
The Senior Engineer Electrical Systems performs a variety of engineering work including design, analysis, substantiation, certification, drawing interpretation and project management related to transport category aircraft. Provides (or may provide) senior level engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Design and analyze electrical systems and components, typically in support aircraft interior modifications and avionics upgrades (STC projects).
2. Prepare electrical engineering reports, Engineering Authorization (EAs), drawings, analysis, and test plans.
3. Develop cabin electrical modification/installation work instruction, procedures and recommendations.
4. Coordinate and monitor electrical aspects of project schedule with project managers.
5. Monitor and support electrical kit development and parts suppliers (internal and external).
6. Support electrical aspects of proposal development. 7. Coordinate with foreign and domestic approval authorities and their representatives for any necessary assistance and/or approvals.
8. Work within engineering team to delegate and assign work to appropriate team members.
9. Applies area of specialty to design, develop and implement creative and innovative solutions to difficult problems.
10. Reviews progress with management and recommends corrective action along with review of alternatives. 11. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Electrical/Aerospace Engineering.
2. 8+ years of experience in Aviation Electrical Engineering.
3. 4+ years of experience with aircraft electrical systems and wiring diagrams
4. Familiarity with the Supplemental Type Certificate (STC) process, OEM documentation, and working with DERs

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Visio.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred. 4. Aviation background and electrical/avionics experience.
5. Knowledge of industry design and documentation standards.
6. Experience with electrical assemblies and components.
7. Ability to coach and motivate team of engineers.
8. Ability to work independently and cross-functionally.
9. Budget and project management experience.
10. Experience leading employees/teams in productive and efficient manner.
11. Requires in-depth knowledge of applicable regulatory agency requirements and discern how a design may be influenced by them. 12. Requires reasoning/analytical skills to creatively design and problem solve.
13. Strong communication and problem-solving skills.
14. Strong time-management and organizational skills.


The Structures Company is an AA/EOE.
 
Job Number: 343
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

FEMAP FEA Analyst

Description:
Aircraft

Job location: Montreal, Quebec Canada
 
Job Location: Canada
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

FEMAP FEA Analyst

Description:
Aircraft
 
Job Location: North Dakota
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls

Description:
On any given day you might:
• Develop air data systems design, architecture and support product plan development, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of air data systems
• Define requirements for the air data systems to ensure compliance with regulations and customer requirements
• Research new air data concepts and technologies that fit the Aerion technology roadmap
• Provide validation and verification of air data systems requirements
We're looking for someone who has:
• Bachelor’s Degree in relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in air data and avionics systems development, design and testing in a Military, Commercial, or business aircraft development program
• 8+ years of demonstrated experience specific to air data systems, air data technical principles and technologies, and managing system suppliers as the technical point of contact
• In-depth and current knowledge of Part 25 regulatory requirements, including air data specific certification requirements (e.g. RVSM)
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired, including flight test experience
• Recent experience in developing air data, avionics and other aircraft systems, such as Automatic Flight Control System (AFCS), from concept through certification strongly desired
• Optical air data systems experience desired
• Demonstrated ability to understand & define requirements, generate architecture, and achieve compliance
We want to build a company around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity
Let's Build a Company Together
We're looking for people from scrappy startups, established corporations, and everything in between. Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 1
Job Location: Reno, NV
Per Diem: Split
Overtime: Possible
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Controls Engineer / F-16 experience is highly preferred / F-22 & F35 experience desired - Clearance CA

Description:
166860 Job Title: Flight Controls Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2648-1
Max Pay Rate: $85.00/hr
Start Date: 12/2/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests.

This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will
(1) the coordinate and direct the execution of pre-flight and post-flight activities to ensure aircraft test readiness,
(2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives,
(3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and
(4) coordinate as required with other organizations associated with test readiness.

This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.

Desired Skills
(F-16 experience is highly preferred / F-22 & F35 experience desired)
Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired.
-Must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.


Qty 4 positions

Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.
Work location is Edwards AFB
 
Job Number: JE-2648-1S
Job Location: Edwards AFB, CA
Rate: 85/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Deck Design Engineer - Avionics

Description:
• Design and develop the new aircraft Flight Deck with input from HMI, interior supplier, Flight Controls IPT and the Avionics IPT
• Embody the new aircraft Flight Deck concept into the 3D Digital Mock-Up (DMU)
• Model components and place them in the DMU
• Add supplier furnished 3D models into the DMU
• Model the Flight Deck instrument panels
• Utilize 3D Human Builder programs to simulate crew interactions in the 3d DMU Flight Deck
• Provide direct input to the Flight Deck design and Avionics engineers
• Assist in the creation of the new aircraft Flight Deck mock-up
• Assist in the creation of the new aircraft Flight Deck Simulator
• Ensure compliance with regulations and customer requirements
• Interact directly with suppliers
• Work with strict configuration control requirements
• Report Status
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention


We're looking for someone who has:
• Bachelor’s degree in relevant field required.
• 5+ years of experience within the Avionics discipline.
• Experience working on aircraft development programs
• Expert level of competency using CATIA V5
• Working knowledge of PLM tools
• Knowledge of HMI design and integration
• Clear understanding of all aspects of Flight Deck development
• An understanding of Systems Engineering
• An understanding of anthropometrics, pilot psychology, Pilot workload, HMI and flight deck equipment interactions
• Familiarity with Part 25 Regulations especially 1302, 1309, 1322, ARP 4754A, ARP 6049494, Mil-STD 1472 and other relevant industry standards is preferred.
• Experience with Flight Deck mock-up and Simulator design




The Structures Company is an AA/EOE.
 
Job Number: 330
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Control Engineer

Description:
Flight Test Control Engineer

Edwards Air Force Base, CA
$85/hr
15 month W2 contract
Swing Shift, 9/80
*MUST HAVE AN ACTIVE DOD SECRET CLEARANCE*

Description
This position is for a flight test control engineer at Edwards Air Force Base, CA to provide ground operations support for flight test planning, execution, and verification/validation of performance at the F-16 Combined Test Force (CTF). The applicant will also be expected to provide ground ops support at the F-22 & F35 CTF as needed. The applicant will team with US Air Force, contractor, and civil service engineers as part of an integrated test team for developmental and operational tests. This position will serve as the principal focal point between aircraft maintenance and flight operations engineering personnel. He/she will (1) the coordinate and direct the execution of preflight and post-flight activities to ensure aircraft test readiness, (2) provide configuration control of aircraft software and hardware configurations to ensure that hardware, software, and instrumentation configurations are correct to meet test objectives, (3) coordinate maintenance and logistic support for systems checkouts, flight operations, and anomaly troubleshooting, and (4) coordinate as required with other organizations associated with test readiness.
This position will act as the principal focal point between maintenance, engineering and flight crew. Relays maintenance related aircraft constraints to the aircraft FTE's. Consult with management on changes or problems. Solve application and technical problems working collaboratively and independently with individuals from diverse technical disciplines and represent the organization frequent inter-organizational and outside customer contacts; Adapt to quickly changing tasks and requirements and learn new skills quickly.
**Swing shift, overtime, travel and weekend work may be required to support mission & staffing needs.

**Must be a US Citizen. This position is located at a facility that requires special access.**

Basic Qualifications
Broad experience with fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
Experience in USAF maintenance activities and procedures, and T-2 modification processes.
Must have an active/current Secret clearance.

Desired skills
*Swing shift, odd shifts, overtime, travel and weekend work may be required as needed.
- (F-16 experience is highly preferred / F-22 & F35 experience desired) Broad knowledge of fighter aircraft flight test methods, aircraft maintenance, avionics maintenance and flight test instrumentation.
- Exceptional planning and coordinating skills are required.
- Ability to interface with all levels of project management is desired. The applicant must have a strong customer focus, reinforced with excellent communication skills and interpersonal skill. Above average oral and written communication skills are desired.
 
Job Number: 11852
Job Location: Palmdale, CA
Rate: 85.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineering Manager

Description:
Required:
• Engineering Degree
• Industrial Engineering background
• Either a Green Belt, or Black Belt in Lean/Six Sigma Practices
• Experience with “cost out”, process improvement, lean processes, analytical background.
• Must have experience managing/leading groups of 8+ Industrial Engineers.
• Must have an aerospace background
• Will consider someone who has lead experience from larger companies leading groups of 8 plus engineers, but would prefer someone with management experience.


Job Description
Summary Statement: Plans, directs and coordinates activities of an industrial engineering department in the utilization of facilities, equipment, materials and personnel to improve efficiency of operations relative to the production of components, parts, systems and subsystems of operational aircraft. Possesses extensive knowledge of department processes and manages subordinate staff in the day-to-day performance of their jobs to ensure that project and/or department milestones and goals are met and adhering to approved budgets.




The Structures Company is an AA/EOE.
 
Job Number: 353
Job Location: Tulsa, OK
Rate: $100-$130K **DOE***
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Interiors Design Engineer

Description:
Position Summary:
Seeking an experienced design engineer that has experience in the interior completions industry who has lead teams of modelers/interior designers on fast paced completions projects. This person does not have to have Solidworks experience.


• Must have experience as a lead engineer
• Must have Aircraft Interior Completions experience.
• Must have a strong background utilizing CATIA, AutoCAD or Solidworks
• Must have experience designing interior components such as monuments, credenzas, closets, beds, tables, etc.
• Must have 3D modeling experience


The Structures Company is an AA/EOE.
 
Job Number: 355
Job Location: IN
Rate: $65/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads Dynamics CFD Engineer - Aircraft

Description:
Aircraft loads analysis engineer with experience working with computational fluid dynamics (CFD), wind tunnel pressure models and flight testing.
 
Job Number: CFD-001
Job Location: Seattle, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Logistics Systems Engineer

Description:
Location: Fort Worth, TX
Rate: $67.41/HR
Duration: 15 month contract
Overtime: Possible (x1.5)
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
1. This position is part of the Systems Engineering organization at our client.
2. Candidate is needed to fulfill a role in obsolescence management of aircraft components, also known as Diminishing Manufacturing Sources & Material Shortages.
3. Specifically, tasks will support the F-35 program and involve activities needed to mitigate the effects of obsolescence including last-time buys, lifetime buys, and Bill of Material (BOM) monitoring.
4. Additional duties will include inventory management and coordination, review and dispositioning of Supplier Data Requirements Lists (SDRLs), generating and briefing Business Case Analyses (BCAs) for parts buys, and developing Contract Data Requirements Lists (CDRLs) to the Customer.
5. Candidate will be expected to interface and integrate solutions across F-35 Engineering leadership, system/subsystem engineering teams, Supply Chain, Business Management, Program Management, and all associate parties involved in DMSMS for the F-35 program.

Requirements:
1. Experience in DMSMS in the Aerospace Industry
2. Experience in Product Data Management using Teamcenter, Siemens PLM Software portfolio.
3. Experience in Electrical Engineering or Components Engineering with emphasis upon Mission Systems Integration.
4. Experience working with Suppliers and/or Supply Chain engagement.
5. Experience using Microsoft Office tools emphasizing Excel, PowerPoint, and Word.
6. Experience with written, verbal, and presentation communications skills, including briefing to members of upper management.
7. Experience in Systems Engineering disciplines with understanding of the total lifecycle (architecture, requirements, design, analysis, integration, verification, production and sustainment) including the following key competencies: Supplier Interface, Proposal Analysis, Risk and Opportunity Assessment.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11432
Job Location: Fort Worth, TX
Rate: $67.41/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
M&P (Material & Process) / Project Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

Job Description:
As M&P (Material & Process) / Project Engineer at Evacuation Solutions site, the successful candidate must be comfortable working with minimal guidance and have the ability to communicate training and instruction to the engineering Community. The engineer should be able to recommend materials and processes, write specifications, ensure compliance of materials with internal, customer, and environmental requirements, conduct failure investigations, write reports, develop and conduct test plans, and support the disposition of materials with quality questions. The position requires interfacing with internal and external customers as well as suppliers, strong organizational, verbal and written communication skills, and safe lab working practices.

Additional typical M&P/Project Responsibilities may include:
• Collaborates with engineering staff to identify possible chemical or materials engineering related problems.
• Analyzes, researches, and develops materials and their related fabrication and application processes to develop and optimize materials for use in engineering design of and/or application in structures, systems and subsystems.
• Performs material analyses that include, but are not limited to, failure analysis, for parts, systems and subsystems, and definition and requirement specifications.
• Supports the development of project plans, schedules and budgets.
• Execute tasks aligned with the engineering standard work tool.
• May be assigned limited responsibility for managing project obligations, such as management of technical documentation package for a product.
• Manages simple to moderately complex/sized projects including hardware design, testing and processing.
• Supports the development of project plans, schedules and budgets for projects under his/her responsibility to ensure adherence to the established program plan, schedule, and budget.
• Maintains and presents plans and progress reports relating to business aspects of the project(s) to track progress and ensure that established targets are met.
• Identifies and addresses project problems and recommends resolutions to ensure the successful completion of projects.
• Facilitates project tasks with the various functional organizations to ensure alignment with overall project objectives.

Basic Qualifications:
Prior M&P experience preferred.
Mechanical/Aerospace experience preferred.
This individual should be considered a technical professional in the development and regulatory approval of aircraft systems.

Education Requirements:
Bachelor’s degree from an accredited institution and three years of prior relevant experience. Engineering degree required. Master's degree in Engineering preferred. In the absence of a degree, 7 years of relevant experience is required.
 
Job Number: 11875
Job Location: Phoenix, AZ
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Controllers

Description:
STS Technical Services is hiring Aircraft Maintenance Controllers in Estero, Florida!

We are a premiere staffing agency providing high-paying contract and direct-hire employment opportunities. We’d love to partner with you to help you take your career to new heights. Check out the following information about this incredible employment opportunity we have right now with a great client of ours.

Job Summary:
Shall positively support and promote safety, security and quality as a fundamental function of the overall responsibility
Alert down-line and other out-stations to secure emergency maintenance that will cover unforeseen maintenance problems and ensure the proper arrangements are made for timely repairs
Monitor aircraft maintenance operations and provide technical assistance to ensure all repairs are completed in accordance with company and Federal Aviation Regulations and maintain safety and on-time operation of flight schedules
Maintain continuous liaison with NCC, providing current and continuing reports of the general mechanical status of the entire fleet and coordinating maintenance requirements during irregular operations to minimize extra costs and disruptions
Ensure all inoperative systems are operated and maintained in accordance with the Minimum Equipment List (MEL), Configuration Deviation List (CDL) or other WGA approved deferrals, and take necessary measures taken to correct these items
Ensure the timely repair of all aircraft with a repetitive history, soliciting or requesting any additional technical information necessary, and directing actions to be taken to minimize cost and unnecessary part replacement
Ensure control of the DI and CI logs in accordance with the correct MEL usage
Issue control numbers and expiration dates to field personnel, and ensure that proper tracking is maintained
Coordinate as necessary with other maintenance areas to ensure availability of required components, parts, and/or troubleshooting expertise to expedite maintenance and repair of aircraft at maintenance base or at down-line stations
Coordinate ferry flights with all concerned departments
Notify appropriate management personnel in the event of an incident or accident, in accordance with instructions in the Emergency Response Manual
Notify the Manager of Manager of Maintenance Control of any situation or practice not within Maintenance Manual requirements that could compromise safety or add unnecessary costs to the maintenance department
Review all faxed or e-mailed log pages for accuracy and compliance with GMM chapter 7
Identifying and entering mechanical interruptions in the electronic maintenance tracking program
Qualifications:
FAA A&P certificate
Minimum 1 year MX controller experience
Minimum 5 years MD11 and/or B747-400 experience
Willing to relocate to Estero, FL
Good communication skills
About STS Technical Services:
STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 49890
Job Location: Estero, FL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Attention: STS Technical Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Manufacturing Engineer

Description:
CATIA, aircraft systems
 
Job Location: Southeast
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

Manufacturing Engineer

Description:
Aircraft experience, CATIA V5
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: sclark@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
The Mass Properties Engineer will support the S-70/H-60 Programs.

The ideal candidate will:
• Conduct Drawing review and analysis to support Mass Properties updates to the database.
• Provide support of other miscellaneous Mass Properties tasks including
o Chart A development,
o Aircraft Weighing,
o Trade Study Analysis and
o ECP updates.
• Have an understanding and working knowledge of SAWE RP 7 and 8
• Have strong interpersonal skills
• Minimum of 15 years Mass Properties experience.
• Be proficient in use of MS Excel and MSWord
• Have experience with CATIA V5.
• Previous experience working at Sikorsky with knowledge of company unique tools and processes.
 
Job Number: 123123123
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years****

Job Description:
- Designs and oversee the plant or manufacturing systems, fabrication, installation, modification, maintenance, and repair of mechanical equipment such as conveyor systems, production machinery, and other material-handling equipment used in fabrication, assembly, and other production functions; analyzes engineering sketches, specifications and related data, and drawings to determine design factors such as size, shape, and arrangement of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios, bearing loads, and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature, pressures, speed, horsepower, and fuel consumption.

Basic Qualifications:
- Experience with 3D parametric modeling and drafting in CATIA or similar tool
- Experience with Teamcenter or similar PDM/PLM software tool
- Demonstrated success working in a team-based environment to meet objectives
- Strong communication and presentation skills, both oral and written
- Experience with Microsoft office suite (Word, Excel, and PowerPoint)
- BS in Mechanical Engineering from an accredited university

Desired skills:
- Familiarity with C-130 or other similar fixed wing or military aircraft
- Experience working in an aerospace environment with exposure to DoD customers
- Experience with ANSI/ASME Y14.100 or similar design and drafting standards
- Familiarity or experience with ASME Y14.5 Geometric Dimensioning and Tolerancing (GD&T)
- Experience designing, or working with, sheet metal and machined components
- Experience with creation, review, and approval of engineering change documentation
- Experience with an engineering change process and/or configuration control process

Education:
- Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 11173
Job Location: Lexington, KY
Rate: $50.00 - $63.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
All candidates must meet the minimum requirements to obtain and maintain a secret clearance which requires US citizenship and a clean criminal history.

Major purpose:

Our engineering team consists of a unique blend or designers, analyzers, coders, planners, and managers. We are organized into interdisciplinary teams to solve the challenging technical problems that our diverse customer set provides us.

Successful candidates for Mechanical Engineer will have a demonstrated ability:



• Design modifications for special mission aircraft. Such modifications typically include the addition of antennas, structural modifications including cutting stringers, frames, skin panels, and relocating impacted systems.

• Analyze the impact to the host platform that the design changes cause and use this analysis during the design phase to ensure that the overall impact to airworthiness is minimized.

• Effectively communicate as part of a multi-disciplinary team working together to ensure that the aircraft systems contribute to the overall success of the program.

• Knowledge of the airworthiness process is a must and the ability to iterate design approaches with the cognizant airworthiness authorities is critical.



Education/Experience/Licenses etc.:

2-4 years BS in Aerospace Engineering, Mechanical Engineering or a related field.

0-2 years MS Degree in a related field or have 6 years relevant experience.



We work in the digital age.

Candidates must be comfortable working with standard MS Office tools as well as have demonstrated experience on a Solid Modeling CAD system and Product Lifecycle Management (PLM) system. Demonstrated experience with solid modeling and Engineering drawing preparation in NX 3D CAD system is mandatory.

A working knowledge of FEA and experience with TeamCenter PLM is preferred.

Must have good communication skills and be able to work any shift, weekends and overtime, as required.




Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
 
Job Number: 19-24132
Job Location: Tulsa, OK
Rate: 45.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-04-10 00:00:00.0
Start Date: 2019-07-08 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Kevin Lord
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / SECRET CLEARANCE/Solid-works, NX, Catia

Description:
Desired Qualifications:
**Candidate must have an ACTIVE SECRET**
•Prefer 4+ years of directly related experience
developing 3D models and detailed drawings
using either Solid-works or NX, or Catia and AutoCAD
•Familiarity with aircraft systems or Simulation equipment experience.
 
Job Number: 658574
Job Location: mid west
Rate: competitive
Per Diem: yes
Overtime: possible
Duration: 12 month plus/contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer (Secret Clearance)

Description:
Major purpose:

Mechanical design, integration, test and production support of simulation equipment. Responsibilities include development of 3D models, detailed drawings and interfacing with manufacturing



Required:

Must have an existing, active Secret Security Clearance.

•BS in Mechanical Engineering or equivalent experience in an engineering discipline

•Prefer 4+ years of directly related experience

•Experience developing 3D models and detailed drawings

•Ability to develop innovative solutions

•Must have strong verbal and written communication skills with the ability to communicate complex issues to technical and non-technical audiences that include peers, management, and customers



Desired Qualifications

•Experience using SolidWorks and AutoCAD

•Finite Element Analysis application experience

•Familiarity with aircraft cockpit systems

•Simulation equipment experienc



****Strong SolidWorks experience is required



Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.

 
Job Number: 19-34863
Job Location: Broken Arrow, OK
Rate: 65.0USD/Hour
Per Diem: --
Overtime: --
Duration: 2020-03-06 00:00:00.0
Start Date: 2019-09-09 00:00:00.0
Input Date: 11/14/2020
Firm Name: NESCO RESOURCE
Attention: Sebastian Hernandez
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
POSITION SUMMARY:
Provides intermediate level engineering drawings related to mechanical systems in support of VIP aircraft completions.

• 5+ years of experience.
• BS degree preferred
• Must have ON THE JOB EXPERIENCE with Solidworks.
• Preferably 5 years of experience from aircraft completions industry
• Must have experience designing waste water systems as that carries the most importance.
• They will be required to contribute on all systems including potable water systems, fire/smoke detection systems and A/C systems within ATA 21, 26, 35 and 38. So experience with any/all of these would be ideal.
• Must be self-sufficient and NOT require guidance.
• It is preferred if they have experience with collaborating data in Solidworks.
• Experience with report writing


The Structures Company is an AA/EOE.
 
Job Number: 340
Job Location: IN
Rate: $57-$65/Hr. **DOE**
Per Diem: Yes
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - EBU Experience Needed

Description:
Mechanical Systems / Project Engineering experience within the aircraft industry required. Experience with EBU's, Engines and/or Propulsion. Experience integrating wire harnesses, or pneumatics, or Hydraulics, or Ducting, or draining systems into the EBU/Engine. Must have a BS degree. Experience from UTAS/Goodrich/Collins Aerospace would be preferred.



The Structures Company is an AA/EOE.
 
Job Number: 337
Job Location: Tulsa, OK
Rate: $75/Hr.
Per Diem: Yes
Overtime: OT - Some as needed
Duration: 12-18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metrology Specialist

Description:
Metrology Specialist with experience in setup, build, and inspection of large tools and assembly structures. This role is for a hands-on person with great versatility with regard to building and assembling large precision structures. The first task of this role will be to execute the installation and setup of new production fixtures, tooling, and equipment in a new production facility. The specialist in this position will support the production tooling and equipment design and installation in order to create an efficient, organized, and lean factory. After production operations begin, the Metrology Specialist will work closely with production personnel to maintain equipment and tooling and contribute to process improvement using lean processes and tools. Metrology Specialists will also help with the large scale aircraft assembly steps and inspection.

Key Components of position
• Hands‐on Tooling assembly
• Large structure handling: driving a forklift, scissor lift, boom lift, etc. operating a crane or hoist, installing concrete mounting points in floor, accurately locating large or heavy structure to within .005” accuracy.
• Must be able to lift 50 lbs.
• Utilizing CAD or 3D software for inspection (one or more of the following):
o PC Demus, Verisurf, Geomagic, Polyworks, Spacial Analyser, or similar
• Metrology
• Working with laser trackers or similar positioning systems

Professional requirements for position
• Hands on experience in setup of large scale precision fixtures or tooling
• Excellent Organizational Skills and problem-solving skills
• Excellent computer skills (CAD and/or 3D software packages) as well as standard Microsoft products
• Strong team player
• Experience with large aircraft assembly and inspection a plus Metal shop skills (welding, grinding, machining, etc) a plus
• Must be able to take direction well and is a strong team player.
• Extreme attention to detail and continual pursuit of perfection.
• Excellent listening and communication skills.
• Ability to maintain composure in high pressure situations
• Excellent organizational skills and problem-solving skills.
Physical Requirements
• Must be able to stand for extended periods – 8 hours min.
• Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces.
• Physically able to handle items weighing up to 40lbs (unassisted).
• Working in confined spaces
• Working on Elevated Platforms

The Structures Company is an AA/EOE.
 
Job Number: 284
Job Location: MoJave, CA
Rate: $55-$70/Hr.
Per Diem: Yes
Overtime: Possible
Duration: 9+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Engineer

Description:
As the Powerplant Subsystems Engineer you will report to the Director of Propulsion IPT and be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU), and fire protection for the aircraft.

• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems
• Define requirements for the powerplant subsystems to ensure compliance with regulations and customer requirements
• Provide validation and verification of powerplant subsystems requirements
• Perform powerplant subsystems tests and certification, and provide system and certification documentation
• Manage the powerplant subsystems scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft



The Structures Company is an AA/EOE.
 
Job Number: 346
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Electrical Engineers - Wiring Design

Description:
Secret Clearance required to start
Electrical Engineer to apply extensive technical principles, theories, and concepts to design and develop electrical block diagrams, system schematic diagrams and cable assembly drawings for overall aircraft functional systems including the selection of electro-mechanical components such as connectors, relays, switches, circuit breakers, and terminal junctions to meet Mil Spec requirements and proven commercial practices.

Email resume: mmccarthy@pdstech.com
 
Job Number: North-Electrical
Job Location: Melbourne, FL
Rate: $70.00-$75.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Technical Editor and Writer - Clearance CA

Description:
Principal Technical Editor and Writer (Job Number: 19028955)
Number of Openings: 1
Location(s): United States-California-San Diego

Shift: 1st Shift

Target Start Date: Nov 4, 2019
Target End Date: Jul 3, 2020
Pay rate: $40.00 - $45.00
Number of openings: 1
Location: Rancho Bernardo
Work schedule: 9/80

The selected candidate will develop and implement software integration plans in a lab environment supporting various space, aircraft, and ground systems.


Essential Functions:

•Write, rewrite, and/or edit documents such as operational procedure manuals and related technical publications
•Communicate clearly and effectively, operational specifications and instructions to aircrew audiences to include military personnel
•Act as a resourceful point of contact to Engineering and the Test teams
•Support the development of teams in the investigation of issues
•Develop, implement, and support the Technical Order (TO) development and build plans
•Demonstrate initiative to acquire subject knowledge by interviewing product developers, observing performance of production methods, referencing technical specifications, blueprints, engineering illustrations, and trade journals
•Requires active participation in overseeing the preparation of illustrative materials, including the selection of drawings, sketches, diagrams and charts

Candidate must be comfortable in a lab environment and be able to collaborate closely with system engineers, hardware designers, and integration/test engineers.


Basic Qualifications:

6 Years with Bachelors, 4 Years with Masters, or equivalent experience. Previous Flight Manual authoring and development experience. Familiar with pilot and/or mission operator controls, displays, and general knowledge of aircraft systems. Previous experience developing Interactive Electronic Technical Manuals (IETMs). Strong attention to detail and personal organization.

Preferred Qualifications:

Previous Military and/or Pilot experience preferred in unmanned or manned aircraft. Familiar with pilot and sensor operator controls, displays, and general knowledge of all aircraft systems. Ability to support airworthiness military type certification. General understanding of S1000D, SGML or XML authoring software, common source database, and technical publications development processes. Ability to interpret engineering documentation including drawings, specifications, alert bulletins and other technical documents. Possess excellent oral and written communications skills. Must be able to perform work with little or minimal supervision. High literacy in structured authoring environment (bookplan structure, task numbering and DTDs/schema, elements, tagging and attributes). Experience producing electronic technical data.
 
Job Number: JK-1807ATO
Job Location: San Diego, CA
Rate: 40-45/hr
Duration: 9 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Acceptance Specialist

Description:
Product Acceptance Specialist
Job ID # 2019-10209
Contract Opportunity
Location: Mesa, AZ
Industry: Defense
Minimum Education: High School Diploma / GED
Minimum Experience: years

What You’ll Do:
• Looking for experience in inspection of Aircraft Wire Harness and electrical panel build processes; to include terminations, layup, boot and close with testing to drawing and specifications.
• Verify basic product conformance to design requirements.
• Provide objective evidence of results.
• Perform auditing, surveillance and monitoring.
• Identify and document discrepancies using non-conformance system.
• Segregate and control non-conforming items.
• Review rework dispositions.
• Assist in product reviews with internal customer during product or process verification.

What You’ll Need:
• Must available to work various shifts: 1st, 2nd and/or weekends.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education & Experience:
• Education/experience typically acquired through basic education (e.g. high school diploma/GED).

What to Expect:
• Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
• Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.


Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.


Resources
For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/
For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2019-10209
Job Location: Mesa, AZ
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: .
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Engineer

Description:
Product Engineer

Colorado Springs, CO
$33.38/hr
12 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Description:
Product Engineer - Responsible for mid to high complexity projects with high complexity related to general engineering and technical process improvements.

Additional:
* Provides experienced sustaining engineering support to aircraft manufacturers, and other aftermarket customers.
* Provides experienced engineering support for operations, supply chain, quality, technical publications and program management.
* Provides sustaining engineering support to airlines and other aftermarket customers.
* Provides engineering support for operations, supply chain, quality, technical publications and program management.
* Updates engineering documentation through Engineering change orders and Document Change notices.
* Communicates with internal and external customers on a regular basis.
* Leads teams through problem investigation and solution/design approaches as well as continuous improvement efforts.
* Provides root cause and corrective action investigations.
* Direct interface with external customers on engineering issue resolution and product improvements.
* Supports after hours Aircraft On Ground (AOG) airline/OEM requests as experience and knowledge is obtained.
* Supports Material Review Board (MRB) evaluation and disposition.
* Ensures quality product utilizing Company quality procedures.
* Audits work area for safety compliance.
* Adheres to all Company rules and codes of conduct.

-Bachelors degree required
 
Job Number: 11663
Job Location: Colorado Springs, CO
Rate: 33.38
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Management 1 / F-35 CA

Description:
Project Management 1 (Job Number: 19029677)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Dec 23, 2019

Target End Date: Dec 18, 2020

Pay rate: $30.00 - $35.00

Number of openings: 1
Assignment Duration: Up to 1 year
Location: Redondo Beach, CA
Work schedule: 9/80


Roles and Responsibilities

Focused support within the F-35 Fleet Modifications (FM) Team to fulfill various project planning, status reporting, and augmented Cost Account Management (CAM) responsibilities. Support the FM Team Manager to accomplish a variety of precise, time-sensitive and high-quality monthly evaluations, metrics and presentations. Responsibilities include; collecting, editing and preparing incremental accomplishment data; assessing team performance to plan, and defining estimate to complete projections. Scope also includes determining earned value variance causes, explanations and corrective recommendations/actions. Position requires a resourceful, independent self-starter able to analyze and solve CAM-derived objectives involving solicitations of and commitments from various stakeholders.

Basic Qualifications

• Cost Account Management experience
• Adept at developing products in MS Word, Excel and Power Point
• Effective verbal and written skills



Preferred Qualifications

• Bachelor degree from an accredited college
• Understanding of Project Management fundamentals
• Applied Earned Value Management System (EMS) experience
• Prior aircraft Maintenance, Repair, Overhaul and Upgrade (MRO&U) program experience
• Familiarity with the F-35 program/platform a plus

 
Job Number: JK-1805ATO
Job Location: Redondo Beach, CA
Rate: 30-35/hr DOE
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Real Time Software Engineer(Active Secret Clearance)

Description:
Leads activities to develop, document and maintain architectures, requirements, algorithms, interfaces and designs for software systems. Leads development of code and integration of complex software components into a fully functional software system.
Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Provides technical leadership for software projects and leads software supplier management activities. Leads development, selection, tailoring and deployment of processes, tools and metrics. Plans, executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards.
• Aircraft and Avionics systems Domain knowledge
• Real-time Embedded Software Development
• Experienced with C++, ADA, and other programming languages
• GreenHills, ADACore, VxWorks, Visual Studio development environment
• Knowledge of one at least few of these tools: DOORS, Clearcase, ClearQuest, Git, VersionOne, JIRA
 
Job Number: RTSE_OK
Job Location: Oklahoma City,, OK
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SCA_Aircraft Survival Flight Equipment Technician - Clearance NC

Description:
Job Title: SCA_Aircraft Survival Flight Equipment Technician

Work Site Address: Fort Bragg, NC 28303
Job Number: 2810-1
Max Pay Rate: $20.68/hr
Start Date: 12/16/2019
End Date: 5/10/2020
Position Type: Contract

Job Summary:
Search and Rescue (SAR) Tech /Personnel Recovery Equipment Technician in the Ft. Bragg/Fayetteville, NC area.

Essential duties includes: Testing of all assigned Personnel Recovery (PR) special mission equipment and systems. Maintain database to track equipment status and periodic maintenance inspection dates. Maintain inventory control utilizing automated systems. Coordinate the outsourcing and life cycle replacement for PR special mission equipment. Conduct basic and advance user-level training on operation of assigned equipment as well as required field maintenance. Support, issue and receive equipment for deployed/deploying personnel, exercise and training events.

Qty 1 position
 
Job Number: JE-2810-1TS
Job Location: Fort Bragg, NC
Rate: 20.68/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SYSTEMS INTEGRATION AND TEST ENGINEER - Clearance CA

Description:
165400 Job Title: Systems Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 1475-1
Max Pay Rate: $75.00/hr
Start Date: 4/15/2019
End Date: 10/31/2019
Position Type: Contract


Job Summary:
Looking for world class talent in SYSTEMS INTEGRATION AND TEST ENGINEERING to be a part of a team that will carry on our tradition making history in advanced aircraft development. Candidate will support a team responsible for the integration and test of Mission Systems capabilities and functions in a laboratory, flying test bed, and flight test environment. Utilizing mission systems requirements, the candidate will assist in the development of test requirements and procedures, execute integration and test activities in a lab environment, evaluate mission systems functionality in a flying test bed, and support mission systems flight test evaluation. Candidate must have strong technical background, excellent communication and interpersonal skills, in-depth understanding of military aircraft functionality, and demonstrated integration and test experience with a modern software intensive mission systems architecture.


Roles and Responsibilities
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Bachelor's or above in a Technical Engineering Discipline

Preferred Skills
Skills Needed:
• Read Engineering Drawings and Parts List
• Capture data digitally from parts lists and excel spreadsheets to form new lists
• Conduct meetings for changes to hardware allocations, tracking and reporting
• Project Planning, Architecture, Functional Allocations
• MS Excel, linking and pivot tables
Attributes
• Good attitude about work and working with others
• Attention to detail
• Good communication skills
• Team player
• Initiative and ability to work
• Passion for detail and getting the job done in a timely fashion
• RF Testing experience
• Experience with harness design and fabrication
• Experience with hardware configuration management

Qty 5 positions needed
This position is located at a facility that requires special access.
Manager will consider both 2 and 3 level candidates.
Will accept experience in lieu of degree
Must have Aviation/Aerospace experience
Experience Writing/Testing/Integrating/Developing Software for Embedded and C++ required
 
Job Number: JE-1475-1S
Job Location: Palmdale, CA
Rate: 75/hr max
Duration: 6 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Avionics Engineers

Description:
Details
• Integrate Avionic Systems
• Establish requirements
• Be responsible for system design and architecture
• Interact directly with suppliers
• Provide technical leadership, mentoring and guidance
• Define traceability to the FARs
• Be responsible for validation and verification of requirements
• Be responsible for system test and certification
• Report Status
• Manage and track mass properties of Avionic Systems during the complete design cycle
• Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention
We're looking for someone who has:
• Bachelor’s degree in relevant field
• 5+ years of experience within the Avionics discipline
• Experience working on aircraft development programs
• Experience with Avionic Systems design and integration
• Demonstrated success developing processes
• Good understanding of Systems Engineering
• Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
• A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.
 
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp to Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer - Cockpit Display Systems - China.

Description:
Senior Engineer - Cockpit Display Systems - China.

Our client requires a Senior Engineer to support the design and development of their new Cockpit Displays System for Civil Aircraft.

We seek Engineers with strong knowledge and experience of working on modern cockpit display systems. Good knowledge of ARINC 661. The selected Engineer must be prepared to work in China. They must be a good communicator and will be an important part of our Client's team.

Role duties and Responsibilities:

:

  •  Technical lead to define a competitive CDS solution, update plans and process for a new part 25 civil program.
  • Experience on ARINC 661 standard, A661 server and widget design (including requirement and architecture) for cockpit display system.
  • Interface with customers and act as a technical domain expert on Display eco-system.
  • Provide supplier oversight and technical issues resolution with existing CDS program.
  • Support the establishment/update of sound system/module requirements capture and development processes, system design process, methods and concepts.
  • Document related technical data of assigned projects in conformance with engineering policies and procedures.
  • Conduct architecture activities at appropriate system/module levels.
  • Integrate processes across functional areas to improve coordination and maximize efficiency.
  • Help to make significant decisions and recommendations on complex issues to achieve long-term results and strategic objectives.
  • Execute design, analysis, and evaluation of assigned projects adhering to business standards, practices, procedures, and product/program requirements, manage corresponding project schedules and costs.
  • Provide training to engineers on system design process, methods and concepts.

 
Job Number: BH-218-1
Job Location: China, China
Rate: Contract hourly rate negotiable in US$
Per Diem: --
Overtime: --
Start Date: 10/24/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer - Cockpit Display Systems - China.

Description:
Senior Engineer - Cockpit Display Systems - China.

Our client requires a Senior Engineer to support the design and development of their new Cockpit Displays System for Civil Aircraft.

We seek Engineers with strong knowledge and experience of working on modern cockpit display systems. Good knowledge of ARINC 661. The selected Engineer must be prepared to work in China. They must be a good communicator and will be an important part of our Client's team.

Role duties and Responsibilities:

:

  •  Technical lead to define a competitive CDS solution, update plans and process for a new part 25 civil program.
  • Experience on ARINC 661 standard, A661 server and widget design (including requirement and architecture) for cockpit display system.
  • Interface with customers and act as a technical domain expert on Display eco-system.
  • Provide supplier oversight and technical issues resolution with existing CDS program.
  • Support the establishment/update of sound system/module requirements capture and development processes, system design process, methods and concepts.
  • Document related technical data of assigned projects in conformance with engineering policies and procedures.
  • Conduct architecture activities at appropriate system/module levels.
  • Integrate processes across functional areas to improve coordination and maximize efficiency.
  • Help to make significant decisions and recommendations on complex issues to achieve long-term results and strategic objectives.
  • Execute design, analysis, and evaluation of assigned projects adhering to business standards, practices, procedures, and product/program requirements, manage corresponding project schedules and costs.
  • Provide training to engineers on system design process, methods and concepts.

 
Job Number: BH-218
Job Location: China, China
Rate: Contract hourly rate negotiable in US$
Per Diem: --
Overtime: --
Start Date: 11/22/2019
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Graham Bird
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Level Project Manager--Phoenix, AZ.

Description:
The Senior Project Engineer position is for engineers with five or more years of component and system level design and development experience. This individual should also be considered a technical expert in the design, development and regulatory approval of aircraft systems. This individual should be capable of proposing new technology and/or designs in support of business unit objectives, as well as to provide technical consultation to Management. This position level is expected to impact business level objectives. Selects and utilizes engineering techniques to solve problems and make design recommendations.

Essential Responsibilities:

Performs and assists in project management including defining, estimating and providing status of project tasks
Manages completion of moderate to complex projects within time and cost constraints
Designs new and improved components, sub-systems and inflatable structures for aircraft evacuation systems
Initiates, oversees and conducts structural and performance analysis of components, sub-systems and systems
Plans and oversees the building, testing and reporting of prototypes through qualification and certification
Resolve moderate to complex technical problems using relentless root cause analysis
Utilizes Design to Cost principals to meet objectives
Assists in compilation of product manuals for customers
Assist in transitioning products from development to production
Identifying, preparing and submitting intellectual property, including patentable, material
 
Job Number: 52032
Job Location: Phoenix, AZ
Per Diem: yes
Overtime: possible
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn Pelletier
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Project Engineer

Description:
Senior Project Engineer

Phoenix, AZ
$48.25/hr
6 month W2 contract
First Shift
*MUST BE A U.S. CITIZEN*
**NO RELOCATION COMPENSATION / NO PER DIEM SPLIT**

Note: This requisition is for a Senior Level Project Engineer with a minimum of 5 years applicable experience.

Position Purpose/Objective:
The Senior Project Engineer position is for engineers with five or more years of component and system level design and development experience. This individual should also be considered a technical expert in the design, development and regulatory approval of aircraft systems. This individual should be capable of proposing new technology and/or designs in support of business unit objectives, as well as to provide technical consultation to Management. This position level is expected to impact business level objectives. Selects and utilizes engineering techniques to solve problems and make design recommendations.

Essential Responsibilities:
Performs and assists in project management including defining, estimating and providing status of project tasks
Manages completion of moderate to complex projects within time and cost constraints
Designs new and improved components, sub-systems and inflatable structures for aircraft evacuation systems
Initiates, oversees and conducts structural and performance analysis of components, sub-systems and systems
Plans and oversees the building, testing and reporting of prototypes through qualification and certification
Resolve moderate to complex technical problems using relentless root cause analysis
Utilizes Design to Cost principals to meet objectives
Assists in compilation of product manuals for customers
Assist in transitioning products from development to production
Identifying, preparing and submitting intellectual property, including patentable, material
Bachelors degree required
 
Job Number: 11889
Job Location: Phoenix, AZ
Rate: 48.25
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Structures Design Engineer

Description:
Summary
• As the Senior Structures Design Engineer you will report to the Structures Manager and be responsible for contributing to the design and configuration of the primary aircraft structures for a business jet.

On any given day you might:
• Be Responsible for subsystems integration and packaging into primary structure
• Design and configure primary aircraft structures
• Analyze the applicability of new and emerging technologies and advanced techniques
• Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements
• Serve as a design focal between the program and Tier 1 suppliers
• Support technical review of supplier capabilities and progress

We're looking for someone who has:
• A bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area
• 7+ years of experience in performing design of large aerospace primary structures
• Strong composite structural design background
• Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry
• Knowledge of CATIA V5 and Teamcenter PLM is preferred
• Surfacing skills is preferred
• Experience with Fibersim or equivalent is preferred
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Thorough understanding of the structural design requirements for Part 25 certification is preferred
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets

We want to build a team around people who are:
• Highly self-motivated with a strong bias for action
• Effective at nurturing strong professional relationships
• Committed to fostering a culture of empowerment & creativity

Let's Build a Company Together
• We're looking for people from scrappy startups, established corporations, and everything in between.
• Bring your ideas and experiences, be ready to innovate and learn, and together we'll revolutionize the aerospace industry!
 
Job Number: 42-029
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Design Engineer - Large Aircraft

Description:
Senior Aircraft Systems Design Engineer with a minimum of 8 years experience designing electrical, mechanical, fuel and hydraulic systems using CATIA V5. Propulsion systems experience a plus.
 
Job Number: SDE-001
Job Location: Seattle, WA
Rate: $70/hr
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Tooling SME Engineer - Large Aircraft

Description:
Senior Tool Subject Matter Expert Engineer with high level tool design experience on large commercial aircraft. Must have high level understanding of modern innovative tooling approaches for composite structures and automated tooling for composite structures and automated tooling for final assembly.
 
Job Number: SME-001
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6-12 mo
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: WINDSPEED TECHNOLOGIES
Attention: Bruce Stewart
Address: 2615 W CASINO RD STE 4B
City, State: EVERETT, WA 98204
Phone: 425/248-0372
Fax Phone: 800/568-0556
Website: www.windspeedtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sheet Metal Mechanic / C-130 desired / modification experience URGENT priority fill SC

Description:
166861 Job Title: Sheet Metal Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2681-1
Max Pay Rate: $29.00/hr
Start Date: 1/13/2020
End Date: 1/13/2021
Position Type: Contract

Need qualified candidates with experience modifying C-130 and/or any other heavy aircraft.

Manager is highly motivated to fill ASAP

C-130 experience is desired but not required.

There are 11 open spots available for this request.

Position Details:
• Sheet Metal Mechanic
• Contract duration is 1-year with potential to extend up to 18 months
• Job Description: Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.
• C-130 experience desired but not required.

Skills:
Category Name Required Importance Experience
Areas of Expertise C-130 No 1 4 - 6 Years

Qty 11 position

Manager is highly motivated to make selections quickly.
 
Job Number: JEG-2681-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sheet Metal Mechanic / C-130 modification experience required URGENT SC

Description:
166687
Job Title: Sheet Metal Mechanic

Work Site Address: Greenville, SC 29605
Job Number: 2463-1
Max Pay Rate: $33.83/hr
Start Date: 11/18/2019
End Date: 7/31/2020
Position Type: Contract

Job Summary:
Plans, lays out, fabricates, assembles, installs, and repairs both internal and external aircraft structures and surfaces for aircraft modification in accordance with technical manuals, engineering drawings, and FAA regulations.

Qualifications and Education Requirements
C-130H Experience
Modification Experience

Skills: Category Name Required Importance Experience
Areas of Expertise Aircraft Modification No 2 2 - 4 Years
Areas of Expertise C-130H No 1 4 - 6 Years

Qty 3 positions
This is an URGENT requirement.
 
Job Number: JEG-2463-1
Job Location: Greenville, SC
Rate: 33.68/hr max
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer / C/C++ CA

Description:
Job ID# 26511
Title TEMP Software Developer, C/C++
Experience Level Entry-Level (0-2 years)

Pay Rate $41.71/DOE
City San Diego
State California
Work Schedule Rule 9/80
Temp Assignment Duration (# of Days) 365

Job Summary
Client is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

Software Engineers write code for small embedded processors for various components of aircraft and ground station, as well as simulating various sensors and components within the aircraft. This position involves maintaining and adding trainer capabilities to our existing simulation systems, as well as working with new aircraft designs.

Come join a team of professional engineers working in a highly dynamic environment with an incredible variety of work. The successful candidate will be expected to become familiar with the system and become proficient in writing requirements documents, design documents, test documents, and implementing code to fulfill those requirements before moving on to support larger efforts within the group. Experience with C/C++ and embedded systems is a plus!

Essential Qualifications
Typically requires a bachelors degree in computer science, information systems or related discipline. May substitute equivalent experience in lieu of education.

Must have a basic understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply basic use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a limited internal audience. The ability to work both independently and on a team is essential. Able to work extended hours as required.

Additional Qualifications
Requires a bachelor’s degree in Computer Science, Computer Engineering, or related discipline.
Experience with C/C++ highly desired.

Must possess the ability to understand new concepts quickly and apply them accurately throughout an dynamic and fast-pace environment.

Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a limited internal audience. The ability to work both independently and on a team is essential.
 
Job Number: JE-26511ATO
Job Location: San Diego, CA
Rate: 41.71/hr DOE
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Marietta, GA
$72/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Will become a technical staff member for laboratory software development and run-time simulation computing environments for the LM Aero Simulation and Systems Integration Laboratories (SimSIL). This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-22, F-35, C-5, C-130J Aircraft. As part of the Simulation and System Integration Labs (SimSIL) organization, the candidate will provide computer and network support for Windows, Linux and Solaris Operating Systems, and be able to assist other developers, modelers and integrators working on these systems and run-time systems.
Security+ CE Certification
Experience with software development.
Experience with Windows, Linux and Solaris operating systems.
Experience configuring computer systems and software.
Bachelor's degree in an Engineering/Technical field.

Skill Matrix: (none required)
Information Security
Local/Wide Area Networks
Mainframe Servers
Solaris
Intel Hardware/Servers Install
IT Security Administration
Unix Administrator
 
Job Number: 11825
Job Location: Marietta, GA
Rate: 72.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Fort Worth, TX
$65/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Real-Time Simulation Software Engineer working on the F-35 Shared Simulation Software team. You will be part of the highly innovative Labs & Technical Services (L&TS) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within L&TS resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software.
* Experience in one or more areas related to simulation software, e.g. real-time executives, modeling and simulation, visual systems, data management, analysis systems, etc.
* Experience with C++ programming language
* Experience with Object-Oriented Analysis (OOA) / Object-Oriented Design (OOD) techniques
* Bachelor's degree in an Engineering/Technical Field
* Experience with software in a highly integration-intensive environment
* Experience with Aircraft Avionics Sensors - Electronic Warefare (EW), Electronic Support Measures (ESM), RADAR, Distributed Aperature System (DAS), Electro-Optical Targeting System (EOTS)
* Strong data analytics experience
* Experience with Agile software development methodologies and tools, such as VersionOne
* Experience with Linux operating systems

Skill Matrix:
Software design and development
C++ - Advanced Level
C++ - Intermediate Level
Modeling
Real Time
Simulation
Software design principles
 
Job Number: 11826
Job Location: Fort Worth, TX
Rate: 65.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Fort Worth, TX
$69/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
Real-Time Simulation Software Engineer working on the F-35 Shared Simulation Software team. You will be part of the highly innovative Labs & Technical Services (L&TS) organization, responsible for developing and maintaining manned aircraft weapon simulation systems utilized for weapons systems development from concept design through production and delivery. Within L&TS resides an extensive selection of simulators and software/systems integration test capabilities, including low-cost rapid prototyping concept development systems, full-dome handling qualities simulations, high-fidelity multi-ship, real-time, man-in-the-loop simulation systems, and hardware-in-the-loop mission systems and vehicle systems integration venues. Our products are used to advance weapon systems development, strengthen pilot familiarization, assess human factors, evaluate aircraft control laws, improve mission study effectiveness, provide test capabilities required for contract verification and provide integration testing and verification capabilities for aircraft systems and software.

* Bachelor's degree in an Engineering/Technical Field
* Experience with Real-time simulation software development
* Experience with Aircraft Avionics Sensors - EO/IR (Electro-Optical/Infrared)
* Experience with C++ programming

Skill Matrix: (not required)
Software design and development
C++ - Advanced Level
C++ - Intermediate Level
Modeling
Real Time
Simulation
Software design principles
 
Job Number: 11834
Job Location: Fort Worth, TX
Rate: 69.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Engineer

Marietta, GA
$66/hr
15 month W2 contract
First Shift
*MUST HAVE AN ACTIVE SECRET CLEARANCE*

Description:
The Software Engineer will be a technical staff member for laboratory software development within the LM Aero Labs and Technical Services (L&TS) Simulation Team. This organization develops state of the art, real-time, pilot-in-the-loop fighter and airlift simulations and systems integration laboratories. This includes simulators for the F-16, F-22, F-35, C-5, C-130J, and L-100 aircraft. Software will be developed for Linux, Windows, or Solaris platforms. Selected candidate may operate and maintain existing laboratory venues. Assignments may change over time as required by the organization. Initial assignment will likely involve development, integration, documentation, test and debugging of airframe, aircraft system and avionics software models that contain logical and mathematical solutions for experimental, developmental and production aircraft in computer languages for solutions by means of data processing. Must be able to apply the appropriate standards, processes, procedures and tools throughout the development life cycle, locate and correct programing errors, prepare operating instructions, compile documentation of program development, and analyze system capabilities.


Bachelor of Science in an Engineering discipline or another technically related discipline from an accredited university.
-Experience in the use of Windows and Unix Operating Systems.
-4+ years experience of software development in high order languages (C++, Java and/or Ada).
-Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment
 
Job Number: 11787
Job Location: Marietta, GA
Rate: 66.00
Per Diem: Split Possible
Overtime: Possible
Duration: 15 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Clearance TX

Description:
166452 Job Title: Software Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2165-1
Max Pay Rate: $103.70/hr
Start Date: 10/15/2019
End Date: 1/15/2021
Position Type: Contract

Job Summary:
Looking for world class talent in Software Engineering to be a part of a team that will carry on our 75 year tradition making history in advanced aircraft development.
This position is with the Advanced Development Programs Software Systems group in Fort Worth, TX. This position requires an experienced software engineer to be a part of a strong software development team. The team uses a wide application of modern technical principles, theories, and concepts in the software field to develop, integrate, and test open mission systems software products that can be applied to air and ground based systems.

The candidate will be responsible for all phases of developing software. Candidate responsibilities will span the technology development lifecycle, including requirements generation, system and software design and implementation, integration and flight test, and adjudicating change requests as the software is updated, tested, and integrated. Integration activities will include a multitude of host systems, such as live assets of varying capability and structure, simulated systems, and laboratory environments that include constructive simulations, physical hardware, and system simulations.
The successful candidate will lead a high-performing multi-site, multi-program team and must be self-motivated with a strong work ethic, time-management, and interpersonal skills. The successful candidate must have demonstrated effective communication skills as the position will require frequent inter-organizational and outside customer interactions. The ability to travel on occasion for team interaction and integration and test activities is required.

Qualifications and Education Requirements
BS+6-10 YRS or MS+4-8 YRS
STEM Degree
The successful candidate will need to pass a security screening before interview.
Demonstrated leadership experience is required. Experience with C/C++ is required. Experience with XML based open standards, modular open mission systems architectures, Common Software Baseline processes, and Agile processes and tools is highly desired. The candidate must have experience with all phases of the Software Engineering Process from requirements generation, through development, integration, and test. In addition, recent work experience with embedded architectures, single board computers, hardware and software in the loop implementation and testing, and F-35 Mission Systems Software is a plus.

Desired Skills
C and Java languages
XML knowledge
Service Oriented Architecture Knowledge
Object Oriented Analysis and Design
Object Oriented Programming
Agile Software Development
Linux and Windows Operating Systems
Message Broker Technology (e.g. Active MQ)
UML tools (e.g. Rational Rose, Rhapsody)
Configuration Management Systems (e.g. Git)
Agile Process Tools (e.g. Version One)
Software Development Tools (e.g. Visual Studio, Eclipse)
Atlassian Tools (e.g. Stash, Jira)
Continuous Integration (e.g. Jenkins, Bamboo)
Requirements generation and system interface development
System test and Integration experience
UCI Knowledge
Modular Open Mission Systems Development
Mission Systems and Battle Management Knowledge

Preferred Skills
Skills: Category Name Required Importance Experience
Software Skills C++ - Expert Level No 1 4 - 6 Years


Qty 1 position
 
Job Number: JE-2165-1TS
Job Location: Fort Worth, TX
Rate: 103.70/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers - Many Needed

Description:
Develop real-time embedded software for the most sophisticated military aircraft.

Key responsibilities could include:

•Software Algorithm Development using advance Machine Learning techniques.
•Software development, modeling, simulation, testing, and/or analysis using C, C++, C#, Python, Java, MatLab, Ada, or Linux.
•Working with customers and other engineers to define requirements, such as understanding and agreeing upon the function of the software system.
•Architecting and designing software to meet current and future requirement.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Soft-MO-Boe
Job Location: St. Louis, MO
Rate: $80.00-$85.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Avionics Engineer

Description:
• Integrate Avionic Systems
• Establish requirements
• Be responsible for system design and architecture
• Interact directly with suppliers
• Provide technical leadership, mentoring and guidance
• Define traceability to the FARs
• Be responsible for validation and verification of requirements
• Be responsible for system test and certification
• Report Status
• Manage and track mass properties of Avionic Systems during the complete design cycle
• Provide expert level guidance on both practical and theoretical aspects of the Avionic Systems design
• Provide support for engineering, certification, and flight test departments from concept to product certification
• Foster a culture that inspires high levels of performance and employee retention



We're looking for someone who has:
• Bachelor’s degree in relevant field
• 5+ years of experience within the Avionics discipline
• Experience working on aircraft development programs
• Experience with Avionic Systems design and integration
• Demonstrated success developing processes
• Good understanding of Systems Engineering
• Familiarity with Part 25, ARP 4754A, DO-160, DO-178 and DO-254 is preferred.
• A strong familiarity with Honeywell Primus EPIC avionics system is a plus but certainly not required.

The Structures Company is an AA/EOE.
 
Job Number: 332
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Subsystem Engineer

Description:
• Develop electrical systems design and architecture
• Perform electrical systems installation and integration activities across the program IPTs
• Provide subject matter expert level technical guidance and leadership for electrical systems
• Perform electrical loads analysis and documentation
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Provide electrical systems support for ground and flight tests for both development and certification
• Interface directly with electrical systems suppliers to ensure requirements are met
• Support the various sub-systems and structures IPTs with their development and certification



We're looking for someone who has:
• Bachelor’s Degree in a relevant engineering area, with a Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent relevant experience in developing electrical systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
• Proven problem-solving skills across multi-disciplinary skill sets
• Experience with CATIA V5 and Teamcenter PLM desired



The Structures Company is an AA/EOE.
 
Job Number: 331
Job Location: Reno, NV
Rate: ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Mechanical Engineer - Clearance GA

Description:
Sr. Principal Mechanical Engineer (Job Number: 19032956)

Number of Openings: 1

Location(s): United States-Georgia-Warner Robins


Shift: 1st Shift

Target Start Date: Nov 25, 2019

Target End Date: Jun 19, 2020

Pay Rate: $57 to $60/hr

Work Schedule: 9/80

Duration of Assignment: Approx 3 to 6 months


This position is located at Warner Robins Air Force Base, Georgia.
This position supports the existing Government program and engineering teams at RAFB as well as Melbourne, FL. Duties to include the review, assessment and update of aircraft maintenance and structural requirements and technical data for sustainment. Development of bill of materials and repair concepts required to accomplish heavy maintenance is required. Experience in the resolution of aging aircraft issues is preferred. Technical support and advisory of Government counterparts is a primary objective of this position. The demonstrated ability to work closely with Government counterparts is required.

Basic Qualifications:

Bachelor's degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university with a minimum of 9 years of experience in design, fabrication or repair of metallic airframe structures.
An active DoD Interim Secret Clearance required to start.


Preferred Qualifications:

BS or MS, Mechanical or Aerospace Engineering
Experience with programmed depot maintenance (PDM) for aging military aircraft
Liaison Engineering Experience.
Excellent verbal and written communication skill
Ability to collaborate in a team environment
Ability to prioritize multiple responsibilities and/or accomplishing them simultaneously
Ability to comprehend and analyze complex problems and develop solutions
Experience with military specs and standards.
Experience interfacing with a military customer
 
Job Number: JK-1815S
Job Location: Warner Robins AFB, GA
Rate: 60/hr max
Per Diem: pd split possible
Duration: 8 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Propulsion Engineer

Description:
As the Senior Propulsion Engineer you'll report to the Director of Propulsion IPT and be responsible for the development, integration, analysis, testing, and certification of the propulsion system on the aircraft.

• Develop propulsion systems using industry standards and best practices based on trade studies, research and analysis.
• Participate in supplier selection and coordination, integration, flight test and certification of propulsion systems.
• Accomplish deliverables associated with the propulsion system for key program milestones, including design reviews, hardware deliveries, testing and certification milestones.
• Coordinate with other engineering, manufacturing, or specialty personnel to resolve problems.


Requirements:
• Minimum of a Bachelor’s Degree in a relevant engineering discipline, or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10+ years of hands-on experience in propulsion systems development for Military, Commercial, and/or Business Jet platforms.
• Experience with propulsion system modeling, including thrust and drag bookkeeping.
• Experience with engine/nacelle/airframe integration.
• Proven success managing and resolving technical issues with engine, nacelle, and EBU suppliers.
• Demonstrated skills generating qualification plans and reports.


The Structures Company is an AA/EOE.
 
Job Number: 345
Job Location: Reno, NV
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Technical writing experience in completions publications such as, outfitting wiring diagram manuals, outfitting maintenance manuals and cabin operating manuals.

Education and Experience Requirements:
Bachelor's Degree or equivalent experience in the authoring of technical publications required. Four (4) years of technical publications experience, to include using industry standards to develop/revise technical documents in word processing applications. Knowledge of basic aircraft system methodology or equivalent technology is required. Proficiency in computer technology/software and typing skills is required. An A&P license and 4 years of related aircraft experience in addition to the four (4) years technical publications experience may offset the degree.


Position Purpose:
Directly responsible (either individually or with other team members) for the development of technical publications. This can include special projects, research and development, and aircraft safety-related content. Support the complete workflow process to ensure successful development and revision of technical publications. Comply with established quality processes to ensure accuracy, ease of use, and timely delivery of content.

Principle Duties and Responsibilities:

Essential Functions: 1. With minimal to no supervision, use aircraft technical data to develop technical content that provides the information necessary for efficient return to service of the aircraft. 2. Conduct reviews, analysis, and modification of technical documents to gain a thorough understanding of complex aircraft system operation. 3. Provide training support on complex system operation and technical publications software and processes. 4. Participate with publications team to ensure department workflows and business processes are followed. 5. Proactively conduct discussions with internal/external customers in the development of source data, making sure it meets technical publication requirements. 6. Directly collaborate with Research and Development, Production, Completions Center, and Customer Support personnel to develop, review, and approve technical procedures. 7. Provide process improvement recommendations to leadership that can reduce overall department cost and/or increase productivity. 8. Contribute to development and continuous improvement of department styles, standards, operating procedures, and priorities. 9. Provide input to leadership on new processes or technology to enhance the Technical Publications business model. 10. Assist in the development of solutions to resolve technical data challenges. 11. Collaborate with leadership, team members, and other departments to develop/implement special projects. Perform other duties as assigned.

Other Requirements: 1. Extensive knowledge of aircraft system methodology gained through practical experience is required. 2. Strong technical writing and communication skills are required. 3. Ability to read and interpret engineering data is required. Experience with 3-D data is desired. 4. Thorough knowledge of aircraft/hand tools, test equipment, parts nomenclature, maintenance procedures, and aircraft equipment (obtained through experience, research, or training) is required.
 
Job Location: Savannah, GA
Rate: $34
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stability and Control Engineer

Description:
Summary
As the Senior Stability & Control Engineer you will report to the VP of Flight Sciences and be responsible for providing detailed stability and control analysis and input to the design of the business jet.

On any given day you might:
Independently address stability and control related issues throughout the vehicle design and test process
Develop aerodynamic databases needed for Stability and Control
Identify Stability and Control issues and propose solutions
Support flight control laws group and the development of aircraft flight control laws
Develop requirements for low and high-speed wind tunnel tests
Support S&C wind tunnel tests from planning through execution and final reports
Provide hinge moment data based on CFD and wind tunnel tests
Provide input for control surface sizing, deflection angles, and rates
Contribute to the development of aircraft stability and control requirements that are compatible with civil certification standards (FAR25/CS25)
Provide inputs to developmental and FAA-approved flight manuals including normal handling characteristics and emergency procedures
Support stability and control flight testing

We're looking for someone who has:
A BS in Aeronautics or Aerospace Engineering with more than 6 years of experience (or MS in engineering plus 4 years of experience)
Experience with the latest industry-standard stability and control and aerodynamic design and analysis tools such as MATLAB/SIMULINK and vortex-lattice tools
Experience working with CFD experts to generate data required for stability and control analyses
Prior experience performing trade studies related to stability and control including using numerical tools as well as wind tunnel data
Experience in the creation of aerodynamic stability and control databases
Knowledge of, and experience with, FAA FAR 25 and EASA CS 25 stability and control regulatory requirements and means of compliance
Experience with flight and wind tunnel test monitoring and data reduction to support stability and control analysis and certification efforts
Familiarity in generating documentation to support certification efforts
 
Job Number: 42-036
Job Location: Reno, NV
Rate: D.O.E.
Per Diem: YES
Overtime: Possible
Duration: 1+ Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Software (5 openings) - Clearance FL

Description:
166746 Job Title: Staff Engineer Software (5 openings)

Work Site Address: 2000 W Nasa Blvd, Melbourne, FL 32901
Job Number: 1822
Max Pay Rate: 85.00
Start Date: 12/16/2019
End Date: 11/12/2021
Position Type: Contract


Job Summary:
Position is a contract to hire Software Engineer that will develop, modify and maintain customized or standardized applications using software engineering best practices and standards, and participate in the full life-cycle of software development, to include requirements development, modeling and design, application development, unit to CSCI testing, integration, formal system testing, release, installation, and maintenance. Excellent verbal, written and interpersonal skills are required.

The E-2D program is seeking a software engineer to support multiple E-2D programs. Their responsibilities would include:
• Full Lifecycle design, implementation, and unit testing of software
• Work with various sub teams to integrate functionality with other IPTs
• Actively participate in code reviews
• Develop SW products from all phases of SW life cycle.

Basic Qualifications:

•Bachelor’s Degree in a Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university plus 14 years of software engineering experience OR Master’s Degree in Science, Technology, Engineering or Mathematics (STEM) discipline from an accredited university and 12 years of software engineering experience.
•Experience developing software / writing code in C/C++ or Ada
•Experience with Linux


•Master’s degree in Computer Engineering, Computer Science, or Electrical Engineering
•Strong Problem Solving Skills
•Experience in Software Test
•Familiarity with Atlassian tool suite and tools like git and Confluence
•Familiarity with Agile software development process
•DOORS experience
•Eclipse or other integrated development environment (IDE)
•Knowledge of Linux systems with basic commands
•Familiar with aircraft systems/subsystems architectures (i.e., CNI, vehicle, cockpit, …)
•Experience with OpenGL


Length of contract is up to 12 months with option to hire.
 
Job Number: JK-1822S
Job Location: Melbourne, FL
Rate: 85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Structural Analysis Engineer / 2nd shift / Nastran Patran FEM analysis DaDT - no clearance CA

Description:
167042 Staff Structural Engineer (Job Number: 19035635 or 19035638)

Number of Openings: 2

Location(s): United States-California-Palmdale


Shift: 2nd Shift

Target Start Date: Mar 16, 2020

Target End Date: Mar 12, 2021

Pay Rate: $80 to $85/hr

Work Schedule: 4/10 - 2nd Shift

Duration of Assignment: Up to 1 year

2 Openings

Successful candidate will be a member of the F-35 Center Fuselage IPT, supporting the assembly of the Center Fuselage at Northrop Grumman's Palmdale Manufacturing Center. Candidate should be experienced in structural analysis methods, including large NASTRAN models, of metallics and advanced composite structures. Desired skills include familiarity with detailed analysis procedures, FEM analysis, PATRAN, layout sizing, structural integrity evaluations, durability and damage tolerance (DaDT) of aircraft structures, material allowables development, acoustic/dynamic evaluations, and weight control. Responsible for liaison support as well as analysis of parts and installation of these parts in the JSF Center Fuselage. Experience should include the development and first-hand assembly line support of aircraft structural parts and assemblies (launch vehicle experience considered) utilizing metallic/composite materials.

Basic Qualifications:

Bachelors Degree plus 14 years of experience in Aerospace, Mechanical, or Civil Engineering or Masters Degree plus 12 years years experience.


Preferred Qualifications:

Previous experience in structural analysis of fighter aircraft structures preferred
 
Job Number: JK-1828
Job Location: Palmdale, CA
Rate: 80-85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
****MUST be a U.S. Citizen or Permanent Resident****

The following Unique Skills are required:
1. A fundamental understanding of static stress analysis as it relates to sizing airframe structural repairs
2. Experience as a stress analyst in post-production environment or a production MRB stress engineer
3. Experience with airworthiness regulations in regards to major repairs or alterations of external airframe parts and components and the requirements to find compliance when analyzing a repair
4. The ability to effectively work with & support a multidiscipline team of engineers, mechanics, Tech Ops, Quality Control, upper management, etc.
5. Strong written and verbal communication and collaborative skills and the ability to effectively communicate the organization's position with external and internal customers
6. Practical hands on aircraft experience and problem solving
7. Experience with GV/G550 horizontal stab stress analysis

The following unique skills are preferred:
1. Company engineering experience, e.g. G650, G500, G600.
2. Experience in fatigue analysis and damage tolerance analysis.
3. Experience in the repair and analysis of composite structure
4. Experience in repair and analysis of aircraft landing gear.
5. Experience in development of Structural Repair Manual (SRM) data.
6. Experience with foreign airworthiness regulatory agencies

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 11898
Job Location: Savannah, GA
Rate: $77.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Analysis Engineer

Description:
Qualifications:
• Must have experience with aircraft primary structures
• Deep understanding of Theoretical Statics and Strength of Materials.
• Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
• Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
• Minimum 5 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
• Experience with free-body diagrams and classical stress analysis techniques
• Hands-on experience with composites part fabrication and assembly processes and proficiency in FEMAP.
• Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
• Excellent verbal and written communication skills
• Excellent organizational and problem-solving skills
• Excellent computer skills, including Outlook, Word, Excel and PowerPoint
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
• Experience with manufacturing-based ERP systems, such as Oracle, is a plus
• Applicants mut be “U.S. persons” as defined by the ITAR (22 CFR §120.15)

Educational Requirements
• Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline


The Structures Company is an AA/EOE.
 
Job Number: 71
Job Location: Mojave, CA
Rate: $75-$85/Hr. ***DOE***
Per Diem: Yes
Overtime: Yes
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer/Ground Test--CT.

Description:
Connecticut aerospace client in need of several Stress Engineers with the following experience.
Design equipment and facilities to support ground test operations. Types of facilities to be engineered include component fatigue and static test machines, rotor and transmission test stands for performance and acceptance testing, power system test beds, airframe/landing gear drop test, airframe shake tests and aircraft tie-down facilities. Responsibility spans from conceptual design to the operational product including resolution of all issues related to design, structural analysis, procurement, fabrication, installation and operation. In addition, the candidate may also be assigned to the oversight of the detail design and planning process as well as the support of subsequent documentation at the manufacturing, assembly and installation level.

Experience: This assignment will require knowledge of mechanical design and documentation practices, understanding specifications, engineering mathematics and manufacturing practices. Excellent written and oral skills as well as personal computer literacy using three-dimensional design tools (CATIA V4 or V5) and Microsoft Office products will be required.

Education: The preferred candidate will possess a four-year degree in Mechanical Engineering or Mechanical Technology.

GREAT $$$$$
 
Job Number: 51627
Job Location: Stratford, CT
Per Diem: possible
Overtime: possible
Start Date: asap
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Carolyn Pelletier
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6335
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineers / Stress Analysts Needed

Description:
Airframe stress analysis and sizing of major aircraft structural components for CFR 14, Part 25 and EASA CS-25 certification.
Support internal loads development and coordination of airframe stiffness updates between major structural components/suppliers.
Support development of analysis methods and tools for design/manufacture/testing/certification.
Support Tier 1 Supplier/Partner analysis and oversight of methods.
Support design reviews and model releases for all structural interfaces within an IPT environment.

Requirements:
Must be a US or Canadian citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772.
8+ years of experience in performing stress analysis, developing methods or performing validation testing for Part 25 aircraft components.
Must have a bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area.
Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position.
Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred.
Knowledge of structural static, durability and damage tolerance requirements for Part 25 certification strongly preferred.
Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Reno, NV
Rate: Open
Per Diem: Yes
Overtime: Possible
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

Description:
****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****Active Secret Clearance highly preferred. Position may require a clearance****

Job Description:
1. Structural analysis in support of aerospace structures.
2. Our client seeks the opportunity to review the qualifications of individuals that are experienced in any one or more areas that match our opportunities – which may currently include: Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis.
3. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.
4. Aerospace experience is required.
5. Familiarization and use of specialized tools for structural analysis is required.
6. Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
7. Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.


Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11851
Job Location: Fort Worth, TX
Rate: $61.00 - $69.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

Job Description:
1. This position is for a Stress Analysis Engineer with our client.
2. This position requires an Airframe Stress Analyst to use their technical expertise to analyze aircraft structure and subsystems installations.
3. The candidate will apply his or her understanding of the technical principles of structural analysis toward the solution of technical problems.
4. The candidate will have thorough knowledge in the field of aircraft structural analysis and will have a broad knowledge of all related disciplines.
5. The candidate will be responsible for preliminary and detailed analysis of aircraft structures, structural assemblies, participation in trade studies and coordination with Integrated Product Teams.
6. Must be a US Citizen.
7. This position is located at a facility that requires special access.

Education:
1. Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: 11831
Job Location: Palmdale, CA
Rate: $85.00 - $91.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 15 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM (Airframe Stress Analyst)

Description:
****MUST have an Active Secret Clearance or to have had one within the last two (2) years with the most recent investigation within the last five (5) years****

Job Description:
1. This position is for a Stress Analyst with our client.
2. This position requires an Airframe Stress Analyst to use their technical expertise to analyze aircraft structure and subsystems installations.
3. The candidate will apply his or her understanding of the technical principles of structural analysis toward the solution of technical problems.
4. The candidate will have thorough knowledge in the field of aircraft structural analysis and will have a broad knowledge of all related disciplines.
5. The candidate will be responsible for preliminary and detailed analysis of aircraft structures, structural assemblies, participation in trade studies and coordination with Integrated Product Teams.
6. Must be a US Citizen.
7. This position is located at a facility that requires special access.

Required Skills:
1. Program Management
2. Project Scheduling
3. Structures
4. Ability to Coach or Mentor Co-Workers
5. Ability to Work with Others
6. Writing proposals and reports
7. Finite Element Analysis (FEA)
8. Nastran/Patran
9. Ability to write technical documents and end-user documentation
10. Project Planning
11. Stress Analysis

Desired Skills:
1. Analysis
2. Composites and Materials
3. Leadership Skills
4. Abaqus
5. Ansys
6. Cost Estimation
7. Engineering
8. Hypermesh
9. Knowledge of materials, substances and their characteristics
10. Metallics Background

Education:
1. Level 4: BS+14 YRS or MS+12 YRS
2. 14 years or more of professional experience; or 12 years of professional experience with a related Masters degree.
3. Experience conducting high temperature analysis on airframe primary structure.
4. Familiarity with high temperature material and joint applications (high thermal gradients, CTE material mismatch and thermal stresses @ 1,200F+)
 
Job Number: 11746
Job Location: Palmdale, CA
Rate: $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 8 mos
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis - Stress/DADT/Dynamics/FEA/FEM CA - Clearance CA

Description:
166801
Job Title: Structural Analysis - Stress/DADT/Dynamics/FEA/FEM


Work Site Address: Palmdale, CA 93599
Job Number: 2581-1
Max Pay Rate: $91.00/hr
Start Date: 12/3/2019
End Date: 3/1/2021
Position Type: Contract


Job Summary:
This position is for a Stress Analysis Engineer. This position requires an Airframe Stress Analyst to use their technical expertise to analyze aircraft structure and subsystems installations. The candidate will apply his or her understanding of the technical principles of structural analysis toward the solution of technical problems.

The candidate will have thorough knowledge in the field of aircraft structural analysis and will have a broad knowledge of all related disciplines. The candidate will be responsible for preliminary and detailed analysis of aircraft structures, structural assemblies, participation in trade studies and coordination with Integrated Product Teams.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS

Qty 15 positions
 
Job Number: JE-2581-1S5
Job Location: Palmdale, CA
Rate: 91/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer

Description:
****MUST have an Active Secret Clearance or to have had one within the last 2 years. Also your last investigation needs to be within the last 5 years****

Job Descriptions:
1. This position is for an Airframe Dynamics Analysis.
2. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures.
3. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis.
4. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

Job Requirements:
1. Structural dynamics/vibro-acoustics analysis experience on air vehicles is required.
2. Structural analysis hand calculation methods
3. Excellent verbal and written communication skills
4. Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
5. Finite Element Analysis (FEA)
6. ADAMS modeling and simulation
7. MSC NASTRAN/PATRAN
8. Familiarity with CAD modeling

Education:
1. B.S. Degree +16 YRS of experience or M.S. Degree +14 YRS of experience.
 
Job Number: 11122
Job Location: Palmdale, CA
Rate: $90.00 - $110.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineers - Many needed - Levels 3-5

Description:
*Looking for many Stress Engineers - all levels
*Guides product design and verifies structural integrity by defining requirements for development of analytical methods, finite element models/simulations
*Aerospace/Aircraft Background

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-MO-Stress
Job Location: St. Louis, MO
Rate: $75.00-$95.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress DADT/Dynamics/FEA/FEM - Clearance CA

Description:
166664
Job Title: Structural Analysis - Stress DADT/Dynamics/FEA/FEM


Work Site Address: Palmdale, CA 93599
Job Number: 2302-1
Max Pay Rate: $90.00/hr
Start Date: 10/23/2019
End Date: 6/19/2020
Position Type: Contract

Job Summary:
This position requires an Airframe Stress Analyst to use their technical expertise to analyze aircraft structure and subsystems installations. The candidate will apply his or her understanding of the technical principles of structural analysis toward the solution of technical problems. The candidate will have thorough knowledge in the field of aircraft structural analysis and will have a broad knowledge of all related disciplines.

Roles and Responsibilities
The candidate will be responsible for preliminary and detailed analysis of aircraft structures, structural assemblies, participation in trade studies and coordination with Integrated Product Teams.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
14 years or more of professional experience; or 12 years of professional experience with a related Masters degree
Experience conducting high temperature analysis on airframe primary structure. Familiarity with high temperature material and joint applications (high thermal gradients, CTE material mismatch and thermal stresses @ 1,200F+)

Preferred Skills
Skills: Category Name Required Importance Experience
Areas of Expertise Program Management Yes 1 6 + Years
Areas of Expertise Project Scheduling Yes 1 4 - 6 Years
Areas of Expertise Structures Yes 1 6 + Years
Areas of Expertise Analysis No 1
Areas of Expertise Composites and Materials No 1
Soft Skills Ability to Coach or Mentor Co-Workers Yes 1 6 + Years
Soft Skills Ability to Work with Others Yes 1 6 + Years
Soft Skills Writing proposals and reports Yes 1 4 - 6 Years
Soft Skills Leadership Skills No 1
Software Skills Finite Element Analysis (FEA) Yes 1 6 + Years
Software Skills Nastran Yes 1 6 + Years
Software Skills Patran Yes 1 6 + Years

Software Skills Abaqus No 1
Technical Skills Ability to write technical documents and end-user documentation Yes 1 6 + Years
Technical Skills Project Planning Yes 1 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
Technical Skills Ansys No 1
Technical Skills Cost Estimation No 1
Technical Skills Engineering No 1
Technical Skills Hypermesh No 1
Technical Skills Knowledge of materials, substances and their characteristics No 1
Technical Skills Metallics Background No 1

Qty 1 position
 
Job Number: JE-2302-1S5
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 8 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - Clearance CA

Description:
165274/1675-1
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM
Work Location: Palmdale, CA
Status: Open

Qty: 3
Desired Start Date: 6/25/2019
End Date: 6/24/2020

Job Description:
This position is for an Airframe Dynamics Analysis Team with Lockheed Martin's Skunk Works® Advanced Development Programs. The candidate will be expected to use their technical expertise to develop dynamics analysis methods and perform analysis of aircraft structures. The candidate will have knowledge in the field of aircraft dynamics structural analysis and have a broad knowledge of all related disciplines in structural analysis. The candidate will work under some supervision from senior engineers and will be expected to coordinate with other teams within the program.

• Structural dynamics/vibro-acoustics analysis experience
• Structural analysis hand calculation methods
• Excellent verbal and written communication skills
• Experience with Microsoft Office (i.e. Excel, Word, and PowerPoint)
• Finite Element Analysis (FEA)
• ADAMS modeling and simulation
• MSC NASTRAN/PATRAN
• Familiarity with CAD modeling

Level: Level 4: BS+16 YRS or MS+14 YRS
Pay Rate: $90.00 Hourly
Experience
Technical Skills Vehicle Dynamics Yes 1 6 + Years
Technical Skills Knowledge of Dynamics and Control Areas No 2
 
Job Number: JE-1675-1S5
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
166195 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Marietta, GA 30063
Job Number: 2003-1
Max Pay Rate: $58.73/hr
Start Date: 9/23/2019
End Date: 9/22/2020
Position Type: Contract

Job Summary:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.

Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.


Skills: Category Name Required Importance Experience
Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years

Qty 1 position needed
 
Job Number: JE-2003-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis-Stress/DADT/Dynamics/FEA/FEM TX

Description:
166857 Job Title: Structural Analysis-Stress/DADT/Dynamics/FEA/FEM

Work Site Address: Fort Worth, TX 76108
Job Number: 2612-1
Max Pay Rate: $69.00/hr
Start Date: 12/3/2019
End Date: 12/31/2020
Position Type: Contract


Job Summary:
Structural analysis in support of aerospace structures.

Roles and Responsibilities
Developing static external aircraft loads and repeated external loads spectrum for aircraft and components, Flutter, Aircraft Dynamic Analysis, Vibration, Vibro-acoustics, Performing static strength (stress) analyses, Performing durability and damage tolerance (DADT) analyses, Building finite element models and/or post-processing results for structural analysis. These activities may be in support of new designs, modifications, retrofits, or support of fielded aircraft.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Aerospace experience is required.
Familiarization and use of specialized tools for structural analysis is required.
Familiarity and experience with FEA tools such as NASTRAN and PATRAN (or other pre/post processor software), is desired.
Candidate must have working knowledge/experience with Computer Aided Design software and be capable of interpreting detail, assembly, and installation type drawings.

Qty 15 positions
 
Job Number: JE-2612-1ATO
Job Location: Fort Worth, TX
Rate: 69/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
General Summary:
Structures Designer Engineering will serve in a design role and be responsible for conceptual design, developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:
• Generates engineering models, drawings, parts list and EO utilizing CATIA V5
• Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
• Will help to achieve compay objectives including cost, weight, project sustaining, on production, or new product development.
• Familiarity with structural analysis methods, load paths, and material properties
• Manages task execution to ensure on-time and on-target completion
• Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
• Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
• Working knowledge of composite aircraft construction including primary and secondary structure
• Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:
• Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
• Minimum of 5 years of experience
• Must possess a minimum of 2000 hours of experience with Catia V5
• Knowledge of Fibersim

Knowledge, Skills and Abilities:
• Knowledge of AMSE Y14.5 dimensioning and tolerancing
• Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
• Experience with Catia V5
• Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
• Proficient in Microsoft Office Products

Physical Requirements:
• Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
• Incumbents may be required to stand, sit, squat, walk, bend, climb ladders, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
• Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
• Read, hear, speak, and see with no restrictions, as required by job duties.
• Comprehend and adhere to management directions and/or safety instructions with no restrictions.
• Effectively communicate in Business English language.
• Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
• Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.
 
Job Number: 28-009
Job Location: Greensboro, NC
Rate: $50-$60/hr
Per Diem: YES
Overtime: YES
Duration: 1+ year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
General Summary:

Structures Designer Engineering will serve in a design role and be responsible for conceptual design, developing drawings and supporting documents i.e. parts list checklist, EOs. Will support design reviews and PDRs/CDRs.

Duties and Responsibilities:

1. Generates engineering models, drawings, parts list and EO utilizing CATIA V5
2. Implement industry best engineering practices (design for manufacturing, design for reliability and design for maintainability)
3. Will help to achieve company objectives including cost, weight, project sustaining, on production, or new product development.
4. Familiarity with structural analysis methods, load paths, and material properties
5. Manages task execution to ensure on-time and on-target completion
6. Perform tolerance and deviation studies. Define detail parts dimensional requirements to meet final design intent.
7. Utilizes drafting and Geometrical Dimensioning and Tolerancing knowledge to optimize the design for cost and producability
8. Working knowledge of composite aircraft construction including primary and secondary structure
9. Able to communicate with others in a respectful manner and acknowledge their concerns and suggestions

Education, Work Experience, Certification and/or Licensure:

1. Bachelor degree in Mechanical Engineering or related engineering discipline preferred but experience can used in lieu of education
2. Minimum of 5 years of primary and secondary structural design experience
3. Must possess a minimum of 2000 hours of experience with Catia V5
4. Knowledge of Fibersim
Knowledge, Skills and Abilities:

1. Knowledge of AMSE Y14.5 dimensioning and tolerancing
2. Possess strong communication skills both verbal and writing skills conducting presentations to internal and external customers
3. Experience with Catia V5
4. Working knowledge of full life cycle drawing approval process including communication with manufacturing, stress, CM, and quality
5. Proficient in Microsoft Office Products


The Structures Company is an AA/EOE.
 
Job Number: 348
Job Location: NC
Rate: $60/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - Composites

Description:
Description:
• Be Responsible for subsystems integration and packaging into primary structure
• Design and configure primary aircraft structures
• Analyze the applicability of new and emerging technologies and advanced techniques
• Provide technical support in design and development of the preliminary structures layout that meets weight, cost, manufacture-ability and certification requirements
• Serve as a design focal between the program and Tier 1 suppliers
• Support technical review of supplier capabilities and progress
Requirements:
• A bachelor’s degree in Aerospace or Mechanical Engineering, or similarly related area
• 7+ years of experience in performing design of large aerospace primary structures
• Strong composite structural design background
• Strong knowledge and understanding of latest structural design, as well as manufacturing trends in the Aerospace industry
• Knowledge of CATIA V5 and Teamcenter PLM is preferred
• Surfacing skills is preferred
• Experience with Fibersim or equivalent is preferred
• Knowledge of the conceptual and preliminary design phases of aircraft development is strongly preferred
• Thorough understanding of the structural design requirements for Part 25 certification is preferred
• Highly self-motivated with a strong bias for action, and excellent problem-solving skills across multi-disciplinary skill sets



The Structures Company is an AA/EOE.
 
Job Number: 352
Job Location: Reno, NV
Rate: $70-$80/Hr. ***DOE***
Per Diem: Yes
Overtime: Possible
Duration: Long-Term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11446
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst

Description:
Location: Marietta, GA
Rate: $60.00/HR
Duration: 1 year contract
Per Diem Split: Yes (if eligible)
Overtime: Possible (x1.5)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
1. This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions.
2. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft.
3. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes.
4. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus.
5. Individual must have strong interpersonal and communication skills.
6. They must be capable of interpreting detail, assembly, and installation drawings.
7. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Education:
1. Level 3: BS+9-15 YRS or MS+7-13 YRS
 
Job Number: 11187
Job Location: Marietta, GA
Rate: $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Strength (Stress) Analyst - Structural Analysis-Stress/DADT/Dynamics/FEA/FEM - no clearance GA

Description:
165671/1801-1
Senior Level Structural Strength (Stress) Analyst
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 8/19/2019
End Date: 8/28/2020

Job Description:
This job is for a Senior Level Structural Strength (Stress) Analyst for the Air Mobility and Maritime Missions program supporting the C-130, LM-100J, C-5, and P-3 aircraft responsible for performing stress analysis on new and modified designs to validate that positive margins of safety exist for all failure modes under all operational and design criteria loading conditions. Job entails conducting strength analyses for primary and secondary structure and mechanisms, providing support to production during airframe manufacture, and substantiation of structural repairs for fielded aircraft. This individual must have a significant amount of experience conducting classical hand analysis of aircraft structure for various failure modes. Proficiency with FEA codes such as Nastran/Patran, StressCheck, and APEX is a plus. Individual must have strong interpersonal and communication skills. They must be capable of interpreting detail, assembly, and installation drawings. Basic qualification is a bachelor's degree from an accredited college in civil, mechanical, aerospace, or aeronautical engineering.

Work Location: Marietta, GA
Level: Level 3: BS+9-15 YRS or MS+7-13 YRS
Pay Rate: $58.73 Hourly

Software Skills Finite Element Analysis (FEA) No 2 4 - 6 Years
Technical Skills Stress Analysis Yes 1 6 + Years
 
Job Number: JE-1801-1
Job Location: Marietta, GA
Rate: 58.73/hr max
Per Diem: pd split possible
Duration: 12 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structures MRB Engineer

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills:
• Bachelors degree in Aerospace or Mechanical Engineering.
• Minimum 10 years dedicated Structures MRB Engineering experience at a recognized Aerospace Manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformance’s of composite and metallic, pressurized and non-pressurized aircraft structures.
• Experience should include all components of the aircraft (Wing, Fuselage, Empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, Solumina, SmarTeam, Word, Excel)
• Initially 1st shift. Occasional 2nd shift and weekend shift support may be required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
• Perform other duties as assigned.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-224
Job Location: Savannah, GA
Rate: $65-$70
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com