Job Search Results

953 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/01/21 Sunday 01:02AM Pacific Time by ContractJobHunter. )

Listings 1 - 953

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
(3) Ice and Rain Systems Engineers

Description:
The Ice and Rain Protection Systems Engineer manages the technical aspects of one or more of the sub-systems (Windshield Heat Control, Horizontal Tail De-Ice, Wing Anti-Ice and Engine Anti-Ice).

Duties and Responsibilities:
Oversees and coordinates of all aspects of one or more sub-system project activities through all phases of the project including preliminary design, detailed design, development, certification, production, and product support.
Maintains and presents to management integrated project schedule and status for one or more sub-systems within the Ice and Rain System.
Tracks and reports status of action items related to design, development, certification and flight test related to one or more sub-systems.
Prepares and maintains functional test procedures to test the sub-system as installed on the aircraft,
Prepares and maintains functional interface control document(s) that identify the integration requirements between the sub-system and the aircraft avionics / electrical power system.
Prepares and maintains regression test procedures to test the avionics / electrical power system integration of the sub-system.
Conducts regression tests to ensure that the sub-system is integrated into the avionics / electrical power system per the released requirements.
Prepares, maintains, and tracks issue reports associated with the sub-system to closure/resolution.
Provides technical and logistical assistance to manufacturing and flight test to resolve any technical issues associated with the sub-system.
Prepares/reviews qualification test procedures and qualification test reports associated with the sub-system.
Establishes qualification test schedules with the supplier of the sub-system and coordinate Designated Engineering Representative (DER) support.
Reviews and coordinates complex hardware / software deliverables.
Supports the creation of the certification plan.

Qualifications
Bachelors’ degree in Engineering or related field from an ABET accredited four year college or university.
5+ years’ experience in the design, development, aircraft integration, and certification of one or more elements of the Ice and Rain Protection Systems.

Knowledge of aircraft communication buses such as ARINC 429 strongly preferred.
Knowledge of FAA processes and procedures related to qualification testing.
Knowledge of DO-160, DO-178B and DO-254 processes are required
Knowledge of 14CFR23 or 25 and advisory circulars related to ECS regulations.
Familiarity with aircraft/aerospace wiring practices and the ability to interpret wiring diagrams and electrical schemata.
Experience in supporting manufacturing of aircraft from a technical standpoint.
Experience in preparing detailed functional test procedures.
Experience in creating Crew Alerting System (CAS) logic.
Experience in preparing/reviewing qualification test procedures for DO-160 tests required.
Experience in preparing or reviewing FAA certification plans is required.
Excellent working knowledge of Microsoft Office Suites (Word, Excel, Project Management, Lotus Notes, PowerPoint).
Strong organizational skills.
Strong presentational skills.
Excellent oral and written communication skills.

The Structures Company, LLC is an AA/EOE.
 
Job Location: Greensboro, NC
Rate: DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 10/17/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

1st Shift

Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

 
 
 
 
 

 
Job Number: 1610061453
Job Location: Las Vegas, NV
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002G2BqAAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2042 - ELECTRICAL WIRING DESIGN ENGINEER

Description:
Perform as a technical authority in wiring diagram design.

Review and approve WD documentation and datasets in part or in whole.

Provide technical support on change management implementation (RFC, PCR).

Recommend and approve design changes.

Engage interior system stakeholders and meet results.

Provide technical leadership to team.

Identify and manage technical risks & opportunities.

Support Supervisor to disposition conflicting requests from different stakeholders.

Communicate lessons learned to other community members.

University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Minimum of 15 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience and you are familiar with ECAD tools & processes.

Experience with Mentor Graphics Logic tool is required.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English - French working knowledge an asset.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Knowledge of CATIA V5 is Required.

Must Know the Harness Configuration Process and can develop associated tools.

Must have knowledge of 2D design diagram and schematics.

Must have Knowledge of wiring parts qualification.

Must have Knowledge of the wiring design process.

Must have Knowledge of wiring parts selection in aircraft systems.

Must have strong negotiation skills.

Must have Knowledge of New EWIS Regulations.

May be required to go to Toronto, ON on occasion.
 
Job Number: 2042
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2154 - PROJ. ENGINEER - ELECTRICAL WIRING DESIGN - resume word doc only

Description:
Provide project management support for multiple projects dealing with changes to the basic aircraft, options and in-service issues.

Establish the project scope, define implementation strategies & risks and present business cases

Prepare & maintain schedules, cost control & progress reports

Support the Service for the delivery of engineering solutions (drawings, modsums, etc) and ensure functional groups meet their commitments until successful implementation.

Take meeting minutes and actions and insure a proper follow-up to reach goals and expectations

Contribute by participating to other tasks depending on program needs and demonstrating flexibility to adapt.

University degree in engineering and/or a related field and/or minimum of fifteen (15) years equivalent experience in the aerospace industry.

Proven experience in project management and/or project engineering.

Demonstrate superior organizational and leadership skills and feel comfortable in a dynamic and changing work environment.

A high level of communication skills in both French and English is an asset.

Preference will be given to candidates who are PMP members of the PMI (Program Management Institute).

Knowledge of the Client Engineering System and client Change Management process would be an asset.

Knowledge of Electrical Harness Design would be a strong asset.

An understanding of aerospace product certification is an asset.

Must be proficient with MS Office applications including MS Project, Power Point, Excel and Access.

Certification in Project Management is an asset

An understanding of aerospace product certification is an asset.
 
Job Number: 2154
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 10/31/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2196 - RM&S ENGINEER - resume word doc only please.

Description:
Be part of the Client R,M&S team, for the Client aircraft, and the primary tasks are to conduct aircraft safety and/or system safety activities, and to support all design activities.

Be responsible for RM&S deliverables specific to the assigned systems.

Participate in the, system functional hazard analysis, aircraft and system fault tree analysis, system safety assessment, failure mode and effect analysis and the final R,M&S certification report.

The duties will also require certification activities. This will involve co-ordination of technical issues and resolutions across all Client, Partner/Supplier, Regulatory and Customer parties.

University graduate in electrical/mechanical engineering with at least 15 years R,M&S experience.

Have a strong electro-mechanical background and has an excellent understanding of aircraft performance characteristics, aircraft systems definition, integration, interfaces, component qualification, reliability and safety requirements and certification process of flight controls systems.

Preferably have been directly involved in the aircraft definition and certification.

Must be very cognizant of the relevant Airworthiness Regulations and certification process.

Have the ability to communicate sound technical proposals and work status to senior management, be a team player, a self-motivated person and be able to work under pressure.

Possess a strong sense of responsibility and integrity.

Have good oral and technical writing skills in English are required (French is an asset).

Possess basic knowledge of MS Office.

Knowledge of creating Failure Mode Effect Analysis (FMEA), Fault Tree Analysis (FTA) and Safety Analysis is required.

Aircraft Level System Safety, preferably in Hydro-Mechanical but could also be Electrical Avionics.

Must have Aircraft Level Knowledge of the following:
In-depth aircraft level understanding FMEA - Failure mode and effects analysis
FTA - Fault Tree Analysis, CMA - Common Mode Assessment
CCMR Process - Candidate Certification Maintenance requirement
25.1309 Regulation
ARP4761 Safety process

Software Skills:
CAFTA required
Must be proficient with Excel
MS Access database development would be asset
Microsoft Office Suite
CATIA would be an asset
 
Job Number: 2196
Job Location: Montreal, Canada
Rate: 62.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/27/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2213 - ELEC. SYS. SCHEMATIC DIAGRAM DESIGN - cv, word doc only

Description:
WILL PROVIDE ADDITIONAL INFO


Bachelor Degree in Aircraft Avionics or Electrical Engineering or Bachelor Degree in Engineering with equivalent work experience in Wiring Integration or Methods.

Minimum fifteen (15) years of relevant working experience in Aerospace .

Knowledge of Mentor Graphics (ESSD) is mandatory.

Have wiring design, wiring installation and/or wiring is a plus.

Must know the Harness Configuration Process.

Must have mastered CATIA 3D wiring design electrical workbench suite.

Possibility for shift work on any day and/or at any time of day Day shift but possibility to work Evening Shift on occasion.
 
Job Number: 2213
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 3+Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2226 - CABINET INTEGRATOR - resume - word doc only

Description:
Act as a specialist in aircraft interior cabinets.

Search for information related to project assignment to the interior and exterior of the aircraft.

Manage customer requests related to customizations of interior options.

Establish technical requirements, mechanical and electrical interfaces and design, integrate, certify, test and troubleshoot the systems described above.

Assume responsibility for Definition engineering deliverables and milestones that the department must meet.

Must be challenge-driven, results-oriented and problem-solving oriented.

Excellent knowledge in design and development of concepts using graphic design software.


Bachelor's Degree in Mechanical or Equivalent Engineering or college with a minimum 5 years of relevant experience.

Familiar with the CATIA V5 3D design tool.

Must have experience in the design or installation of cabinets to be assembled.

You are well organized and focused on projects.

Must have good oral and written communication skills in English and French.

Able to work in a multidisciplinary teams, you adapt easily to changes, and customer satisfaction is your number one priority.

Customer focused, problem-solving and innovative focus as well.

Autonomous, flexible and results-oriented through project management skills.
 
Job Number: 2226
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2231 - ELECTRICAL HARNESS DESIGNER - resume - word doc only

Description:
Produce and deliver Harness Data Reports based on Digital Mock-up and Mentor Graphics.

Integrate the design of the wire harnesses.

Incorporate changes (RFC, PCR) on the harness data reports.

Contribute to the team effort by meeting the team%u2019s objectives for productivity and quality.

Contribute to other relevant tasks needed to support the team%u2019s objectives.

Have a University degree in aircraft avionics or electrical engineering or equivalent work experience in wiring integration.

Have experience with harness manufacturing or methods.

Have a minimum of 5 years of relevant working experience in aerospace.

Have wiring design, wiring installation and/or wiring troubleshooting experience.

Mentor Graphics Harness XC tool knowledge is the primary requirement.

Also have experience with Catia V5.

Have a strong sense of responsibility and have good organization skills.

Must have excellent communication skills including the ability to read/write in English.

Are comfortable working with MS office suite.

Are familiar with BM%u2019s, RAE documents and BAPS related to harnesses.

Communicate clearly and openly with your team.

Embrace changes and new ideas.

Are persistent to reach your goals.

Seek out and accept feedback.
 
Job Number: 2231
Job Location: Montreal, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Email: tdm@tdm.ca
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2239 - CABINET DESIGNER - cv. word doc only

Description:
Act as a specialist in a specific system/monument.

Define technical specifications, mechanical/electrical interfaces, design, integrate, certify, test and troubleshoot the above described systems.

Organize and attend design reviews taking into consideration industry regulations, Client Design Practices and requirements.

Be in direct contact with suppliers and responsible for the delivery of quality engineering documentation that meets Client Standards.

Research, design and evaluate new technical concepts or emerging technologies. (Trade Shows, Air Shows, technical exhibitions, etc).

Procure parts and supply instructions drawings to employees to build mock-ups/prototype.

Provide definition engineering in relation with new designs.

Support the creation of Interface Control Drawings (ICD).

Report status, identify and mitigate roadblocks.

Point of contact on a technical level for designers.

Accountable for engineering deliverables and milestones for a group of monuments.

Bachelor's degree in Mechanical Engineering with 5 to 8 year experience.

Knowledgeable in 3D design with CATIA V5.

Organized and project oriented.

Must be bilingual and have good communication skills including good English and French writing and verbal skills.

Are a team player, working in a multidisciplinary team.

Customer-oriented with innovative problem solving skills and you are organized.

Autonomous, flexible and oriented toward result via your project management skill.

Experience and have lead a small group of designers or equivalent.

Have design experience in cabinet assembly design and/or cabinet installation.
 
Job Number: 2239
Job Location: Montreal, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 24 Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2254- RM & SAFETY ENGINEER - cv. word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Client aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers.

Responsible for reviewing Partner's/Supplier's reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Will be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare & present risk assessments for continued airworthiness queries.

Bachelor's degree in engineering, with at least fifteen (15) years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.)
 
Job Number: 2254
Job Location: Toronto, Canada
Rate: 63.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2262 - TECHNICAL INTEGRATOR - ENGINEERING SIMULATION (ESIM) - cv - word doc

Description:
Ensure ESIM rig readiness for Integration, Validation and BA Acceptance in Montreal :

Ensure proper integration of aircraft systems real time simulation models (RTI models),

Support tests of systems functionality (ATM), malfunctions (MCD) and performance (ATG),

Coordinate snags disposition between ESIM supplier and Client,

Ensure proper level of functionality and performance in accordance with CFTC requirements (Client Flight Test Center),
Finalize implementation of RFC's/PCR's,
Ensure rig configuration control and conformity.

Adhere to Change Management process: early identification of issues/changes/impact statement,

Ensure proper coordination and working link between Client and ESIM supplier: monitor progress, adjust schedule, shuffle priorities to meet schedule

Support reviews of ATM (Acceptance Test Manuals), MCD (Malfunctions Control Documents) and ATG (Acceptance Test Guidelines),

Solve problems in a timely fashion and with a high level of quality,

For any given mission/assignment/problem to be solved, work with the team to provide:


Bachelor's Degree in Electrical Engineering with 5-8 years of experience in Avionic & Electrical Systems, Systems Simulation and Testing area.

Strong communication skills both in English (written, spoken) and French (spoken).

Strong troubleshooting/problem solving skills.

Have the proper attitude to work with Suppliers.

Must have working knowledge using Microsoft Project and Microsoft Office applications.

Are a strong team player and can demonstrate superior organizational and leadership skills.

Autonomous and able to work with little to no guidance.

Driven by results.

Familiarity with part FAR25 / 525 certification process and with the ARP4754 standard, FAR25 requirements and the qualification rules pertaining to avionics/electrical systems is an asset.

Demonstrate initiative, a strong sense of responsibilities and good technical judgment.
 
Job Number: 2262
Job Location: Montreal, Canada
Rate: 64.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 10/20/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2263 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv - word doc only

Description:
Support the Client Final Line Assembly by leading all engineering related activities for a timely resolution to production line issues.

Witness system functional testing and conduct technical investigations on Hydro-Mechanical related issues (FBW & Control Surfaces, Wing High Lift, Hydraulics, Landing Gear, Brakes), analyze and develop solutions/recommendations and reports. Disposition RFCs and RNCs as required.

Work with the product development team to assists with technical proposal activities, including preparation of written material and presentations. Recommend and approve design changes.

Support flight test activities including the development and approval of Test Definition Sheets, trouble-shooting FTV issues, Problem Report Resolution, Test Witnessing, Test reports review and approval.

Support all development, Safety of Flight and Certification Testing on suppliers test rigs, systems and structures test rigs

Interface with the Design Approval Delegate (DADs and CDADs) to ensure all design activities and decisions meet regulatory requirement to achieve flawless certification.

Develop good working relationships with various departments within Company and with all suppliers.


Bachelor of Engineering Degree and eligibility for Professional Engineer registration. AME license is an asset.

Experience in providing engineering support to the Final Line/ Production.

5-10 years'experience in aircraft Hydro-Mechanical systems (FBW, Flt Ctrl, Hydraulic, Landing Gear).

Conversant with design, qualification and certification test requirements of Aircraft Electrical systems.

Knowledge of control systems including system controllers%u2019 integration and design and Software/Hardware certification (DO-160, DO-178, etc).

Familiar with Part 25 certification requirements and advisory material.

Possess strong integration skills, in both system partner management and system technical integration.

Familiar with Microsoft Office software tools.

Strong communication skills, ability to work well in a multi-disciplinary team environment.

Must have previous experience with fly by wire, wing high-lift or hydraulic systems on Commercial or Business Aircraft.

Must have experience in the definition and certification of at least one complex aircraft control system. Flight Controls/FBW experience would be an asset.

Must have a good understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, Hydraulic , Avionics, Auto-Flight, Flight Controls) integration, testing and installation.

Have a good knowledge of data buses, input signal management including monitoring, redundancy management and mode logic, and failure modes and effects.
 
Job Number: 2263
Job Location: Toronto, Canada
Rate: 61.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/22/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2270 - FLY-BY-WIRE SYSTEMS ENGINEER - cv. word doc only

Description:
Integration of equipment to the aircraft and development of equipment interface to other systems and structure.

Develop concepts, design approach and philosophy with the system Partner.

Develop, validate and verify technical requirements of the FBW Flight Control System (FCS) electronic controllers and prepare technical requirements documents.

Validate the FBW electronic controller%u2019s hardware definition and oversee their design.

Perform/Review analysis to evaluate concepts feasibility.

Perform trade off studies and life cycle cost analysis.

Oversee the development of electronic controller interface to other systems and structure.

Actively participate to the different peer and design reviews (PDR, CDR, ...) .

Review/Prepare test procedures.

Review/Prepare certification and test reports.

Review supplier qualification documentation and recommend for approval.

Resolve problems arising from the development and certification activities.

University Engineering Degree in electrical engineering (hardware/electronic designs) or equivalent, and have a minimum of 5 years experience in aerospace related field.

Have been directly involved in the definition and certification of at least one aerospace control system.

Possess an excellent understanding of all facets of system definition, integration, and certification and have a good knowledge of aircraft systems and interfaces (e.g., electrical, hydraulic, avionics, auto-flight).

Have a thorough knowledge of electronic controller designs and qualification to aerospace standards.

Strong knowledge of RTCA DO-160.

Good knowledge of RTCA DO-254.

Have a basic knowledge of FBW FCS architecture, input signal management including monitoring, redundancy management and mode logic, failure modes and effects.

Have a basic knowledge of rigorous requirements validation and design verification processes and techniques (ARP4754).

Good knowledge of Part 25 certification process.

Working knowledge of MATLAB/Simulink/Stateflow simulation environment.

Have a good knowledge of MS Office and Requirements Management tools is an asset.

Have excellent oral presentation and technical writing skills in English (French is an asset).

Possess the following soft skills:

Able to work with limited supervision, be organized, a team player, a self-motivated person, Customer focused, and able to work under pressure.

Show initiative, innovation, leadership, a strong sense of responsibility, integrity, adaptability, good interpersonal communication skills, good engineering judgment, and drive for results.
 
Job Number: 2270
Job Location: Montreal, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2017
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

2nd Shift Maintenance Technician

Description:
Description:
Perform maintenance in support of manufacturing facility on a variety of equipment throughout facility including machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment.  Responsible for monitoring hazardous waste for removal, maintenance of chemical storage area and clean up of chemical spills as required.  Nontoxic or non-hazardous.  Mainly Soap and/or grease
Will be operating a crane or fork lift.
 
Responsibilities:
Provide maintenance support in all areas of manufacturing facility including but not limited to machinery repairs, preventative maintenance, machine relocation, fabrication, welding, electrical repair and installation, plumbing (air, hydraulic, water) with use of a variety of equipment such as hand tools, welding equipment, fork lifts, and precision measuring equipment.  Maintain and develop preventative maintenance program for production related equipment.  Required to perform work in compliance to all safety and EHS policies and procedures. 
 
Qualifications:
  • Knowledge of EHS procedures and policies
  • Knowledge and safe use of production related equipment
  • Working knowledge and use of welding, electrical, and plumbing equipment including repair and maintenance of machinery
  • Millwright Skills and familiar with Electrical and/or Hydraulic
  • Able to interpret OEM handbooks and/or plant diagrams
  • Understanding of reading building plans and electrical schematics
  • Ability to use trouble-shooting and precision measuring equipment
  • Where applicable, trained in maintenance processes such as but not limited to welding, plumbing, electrical and mechanical troubleshooting
  • Vocational or technical training in a maintenance related discipline, strongly preferred

 
Training requirements:

  • Demonstrated ability to comply to maintenance safety procedures such as lock-out tags, etc.
  • Demonstrate ability to safely complete job tasks utilizing manual equipment as well as use of gauges needed for repair fabrication
  • Demonstrate ability to perform preventative maintenance, and repair of facilities equipment
  • Where applicable, complete safety and maintenance training and or certification

For consideration to this position, please contact Eric Khassanov at ekhassanov@pdstech.com or 843-277-6611.
 
 


 
Job Number: 1610057656
Job Location: KS City, MO
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Eric Khassanov
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002FgpWAAS&URLSource=cjhunter

Administrative Assistant 2

Description:
PDS Tech is seeking an Administrative Assistant for an open position in Roosevelt, Wa. 
In your role, you will: 

  • The Field Administrative Support (FAS) person will assist the site with warehouse logistics and administrative tasks.
  • This includes organizing and maintaining a warehouse, shipping and receiving, documentation review, electronic and physical filing, reporting, compliance paperwork, tool and parts management, facility organization and paperwork reviews. 

  • This position will require forklift operations and prior experience is preferred but not required.
  • This is an ideal position for someone who can operate independently and is a highly motivated self-starter that has an attention to detail.
  • Significant computer work with e-mail, Microsoft Office and SAP is part of the normal working environment.
  • Candidates must be able to work on their feet for long periods and regularly lift 50 pounds.

 
Job Number: 1610048928
Job Location: Roosevelt, WA
Per Diem: No
Duration: 11 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Israel Ireneo
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001yV4vAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer

Description:
Seeking an Aeronautical Engineer-N for an opening in Palmdale, CA.

RESPONSIBILITIES:
Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

REQUIRED EXPERIENCE:
Hardware and software integration experience. Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test. C or C++ programming experience. Experience with serial buses.

EDUCATION:
B.S. Degree or above in an Engineering Discipline Several years of laboratory experience

WORK HOURS:

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 165578
Job Location: Palmdale, CA
Duration: 6 Months
Start Date: ASAP
Input Date: 10/03/2017
Firm Name: CHIPTON ROSS
Attention: Debbie Aubert
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

Aeronautical Engineer with active secret / design of mechanical and electronic interfaces / integration test / serial buses C/C++ programming CA

Description:
160459
Requirement #AERO-REQ-0666
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 11/27/2017
End Date 11/09/2018
Number of Resources 1
Security Clearance Secret

Title: Aeronautical Engineer

Description

Candidate will be responsible for designing and building a system integration laboratory (SIL). This effort includes design of mechanical and electronic interfaces to support software development, integration and test efforts. Candidate will have hands-on hardware experience and software skills. Candidate will be able to troubleshoot hardware/software integration issues and perform integration and test. Define, develop, analyze and coordinate SIL requirements, allocate requirements and define interfaces between subsystems. Effort also includes flow down of requirements to procurement specifications, and management of vendor selection and vendor performance, including verification of requirements. The candidate will support system/software verification and validation effort and customer reviews during all phases of system development. The candidate will develop and support integration and system check out (SCO) procedures on flight test article and support pre-flight and post-flight analysis and reviews. Good oral and written communication skills are required as is the ability to flex and adapt in a fast-paced team environment. Complex organization and documentation skills are required.

Skill/Experience/Education

Mandatory:

Final Secret Clearance.

Hardware and software integration experience.
Demonstrated ability to design and troubleshoot mechanical and electronic interfaces to support software development and test.
C or C++ programming experience.
Experience with serial buses.

Desired:

B.S. Degree or above in an Engineering Discipline Several years of laboratory experience


Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0666
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 01/17/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Email: jeana@midcom.com
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer – Level 3

Description:
Aeronautical Engineer – Level 3

Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Duration: 6+ month contract
Shift: 1st Shift
Overtime: Exempt

**Candidates must have an Active Secret Clearance or have had one with the last 2 years**

Description
- Evaluates coupled solar radiation, airflow and conduction heat transfer by both classic methods and finite element analysis.
- Knowledge of a wide range of electronics equipment and cooling methods.
- Experienced in idealizing internal air flow and heat conduction paths into simplified representations to achieve efficient analysis.
- Determines appropriate boundary conditions, film coefficients and convection coefficients and is familiar with industry standard documents governing temperature requirements.
- Documents methods, calculations and results comprehensively and clearly, using industry standard substantiation format.

Skill/Experience/Education
Mandatory:
- 11+ years of experience with heat transfer
- Coupled Flow Field and Thermal/ANSYS/BSME

Desired:
FEMAP/Microsoft office suite/Stress Analysis Background
 
Job Number: 7494
Job Location: Lexington, KY
Rate: $55.00 - $75.00/HR
Per Diem: Split Possible
Overtime: Exempt
Duration: 6+ mos
Input Date: 10/30/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Technician

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.The strategic purpose of the Test and Evaluation Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations.This individual in this position will work with engineers to design and install instrumentation to support the collection of flight test data. The ideal candidate is self-motivated, detail oriented, and knowledgeable on instrumentation theory.

Responsibilities:

Reading and creating wire diagrams.
Selecting or auditing appropriate sensors given engineering requirements.
Working with customers and engineers to define appropriate instrumentation requirements.
Designing instrument installations and creating installation instructions.
Instrumentation installation.
Evaluating instrumentation installations for function and safety.
Troubleshooting instrumentation problems.
Data acquisition system operation.
Documenting data system practices and procedures.
Generating instructions and operation manuals.
Developing sensor calibration and functional test procedures.
Maintaining calibration records.
Domestic and international travel may be required.
Desired Qualifications:

3+ years instrumentation experience in a testing environment. Aircraft flight test preferred.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Ability to work interdependently, and lead small groups.
CATIA V experience beneficial.
Experience with data processing and analysis beneficial.
Computer programming experience beneficial.
Proficient in working with Microsoft Office applications including Word and Excel.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers.
 
Job Location: Moses Lake, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Proposal Managers - Hawthorne, CA

Description:
STS AeroStaff Services now offers Aerospace Proposal Manager jobs in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Manage the day-to-day schedule for one proposal effort
• Lead color-team reviews for proposal effort
• Identify areas where we might be falling behind, in terms of schedule
• Ability to recognize whether or not our proposal is responsive and complaint to the government’s request for proposal

Qualifications:

• Experience as a proposal manager on large-scale government procurements (ideally for the Air Force)
• Some experience writing and editing proposals for the government
• Experience working on proposals involving launch services or satellite systems preferred
• Candidate should be proficient in Microsoft Word and SharePoint
• Experience with Outlook and Excel is also highly desired

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 40290
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/04/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Test Engineer - California

Description:
Leading aircraft company are seeking an experienced Aerospace Test Engineer to support the development, integration and testing of an ejectable flight data recorder project. This is in the early stages of the project and the role will support all phases of system development including design and analysis, requirements compliance methods, certification (verification / validation) test preparation, and integration into large scale commercial aircraft environments.

Responsibilities include:

* Identify testing required for verification and validation using industry standards & regulations
* Prepare system and component functional and performance certification test procedures, manufacturing test methods and procedures, in accordance with input from other team members.
* Review and evaluate identified program functional and performance requirements for applicability to program goals and objectives.
* Establish testing protocols and test requirements based upon test specifications, drawings, as well as manufacturing and process specifications.
* Identify industry standard test equipment and resources
* Conduct and/or witness mechanical and environmental tests for FAA certification. .
* Test and certification will include subcomponent and component system qualification, for both mechanical and electrical requirements
* Position will require interfacing with the FAA or designated engineering representative, preparation of technical status presentations and leading detailed test reviews.

You will have considerable experience in aerospace structural and electrical testing and must be familiar with aerospace test standards MIL-STD-810 and DO-160, with DO-178 and DO-254 knowledge preferred. A working knowledge of CATIA V5 and DOORS requirements management tool would also be useful.

Experience must include a strong background in the aerospace engineering requirements and verification process and the ability to understand mechanical and electrical aerospace drawings, environmental requirements, test requirements, and various aerospace test methods.

This is an initial 12 month contract, working on a long-term project, so work is likely to extend for at least 2 years, with the possibility of the position becoming a staff role.
 
Job Number: JO0000000012
Job Location: Newport Beach, CA
Rate: to $75/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/06/2017
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

Aircraft Painter (35) - OR

Description:
Chipton-Ross is seeking 35 Marine Painters for openings in Portland, OR.

RESPONSIBILITIES:
Looking for Marine painters with experience working on Aircraft or Large Boats.

REQUIRED EXPERIENCE:
- 2-3 years experience
- Electrostatic Spray Gun
- High Pressure Spray Gun
- Mini Jet Spray Gun
- Marine, Auto body or Industrial Painters preferably with HVLP (High Volume Low Pressure) air-fed electro-static paint sprayers.
- At least 2+ years of Industrial and/or Commercial marine/transportation painting experience is highly desired.


ADDITIONAL EXPERIENCE:
Refurbishing experience a big plus.

EDUCATION:
High School Diploma

VARIABLE SHIFT
Shifts are 4- 12 hour shifts.
4 days on, 4 days off

ADDITIONAL:

May pay as low as $15 for an entry level position and if candidate doesn't test as well as expected.
Position may be temp to perm or direct placement, depending on client's needs a candidate's testing.
Client will expect testing for all candidates that they are interested in and show that they have an interest in committing to this opportunity. Client will coordinate and pay for round trip flight to Portland and also give one day of per diem. Skills tests are on Wed, Thurs, Fri. If skills test is passed, client will determine if candidate is Jr. or Sr, and make an offer based on results of testing.

May go up to $22/hour for 2-3 yrs expereince with a STRONG skilll set. Client hopes to move those hired to a Senior Painting position within 3 months, and Senior positions there pay $25.

Shifts are 4- 12 hour shifts. 4 days on, 4 days off with a 10-15% shift differential available.


 
Job Number: 162173
Job Location: Portland, OR
Rate: $22 to $25.00 DOE
Duration: PERM
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Leila Morrow
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: lmorrow@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Parts & Tooling Specialists - Fort Lauderdale, FL

Description:
STS AeroStaff Services offers Aircraft Parts & Tooling Specialist jobs in Fort Lauderdale, Florida.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Summary:

To provide accurate tooling/ aircraft parts/ materials in a safe and efficient manner, to the Repair Station floor personnel. To maintain the stock and inventory in the designated storage area. To purchase quality goods and services for client, in compliance with client cost controls, ethics, and purchasing standards.

Job Responsibilities:

• Receives and responds to material order requisitions and purchase orders to provide and or / obtain information from vendors
• Determines best supply source by analyzing: best price & delivery method via Internet and media
• Identifies the most cost effective product or service, and economical/reliable inbound transportation method
• Identifies new vendors in order to meet required and future needs of the company
• Reviews with vendor: cost, quantity, quality, delivery deadline, and schedule of payment for materials and services
• Enters and updates material requests and new vendors in Quantum
• Obtains proper approval authorization for purchase requisition processing, and converts material requests to purchase orders upon approval
• Ensures compliance of purchase order requirements as to price, quality, quantity, delivery deadlines and compliance with client policies
• Faxes confirmation purchase order to vendors
• Monitors and updates purchase orders with any changes as necessary in database for processing by accounts payable
• Communicates with vendors & transportation companies to ensure on-time shipment/delivery
• Reports on status of critical shipments and interfaces with suppliers to expedite deliveries and resolve issues
• Maintains accurate records of: approvals, items ordered, and items received
• Coordinates return of defective or incorrect shipments
• Locates alternative sources of supplies, materials and parts
• Processes client rotable inventory/on-site stock/core returns to support operational functions
• Completes Warranty Claim forms for Maintenance Mgr.’s approval; submits approved claim forms to Customer Support Dept. for processing
• As designated by management, the Agent identifies, controls, segregates, and maintains all stock and tools to a serviceable or unserviceable category for the Hangar Floor and Stock Room
• Arranges for safe and proper disposal of surplus materials
• Preserves all articles or parts, while carried in the inventory, including parts that are subject to deterioration
• Keeps stock room clean and neat
• Follows appropriate client safety precautions and HAZMAT protocols concerning the handling of the stock, tooling, or shipments
• Provides indoctrination safety instructions to colleagues handling the shipments as necessary
• Locates and selects material, supplies, tools, equipment, or other articles from stored stock and issues item to technicians
• Issues items to production as needed and/or requested; delivers materials to appropriate shop area using forklifts, dollies and other devices
• Distributes to departments any miscellaneous technical information received by the stockroom
• Initiates and tracks procurement activity based on departmental requisitions including: proper entry of all stock transactions in inventory system, and performance of inventory counts from time to time to ensure accuracy of inventory records
• Prepares parts/stock usage reports for management review and action to facilitate job costing and proper asset management
• Reports shipping discrepancies and damaged parts/materials to management
• Traces shipments en-route and expedites/re-routes shipments of an urgent nature
• Prepares tooling, parts, components, etc. for shipment to vendors and customers
• Determines packaging requirements from specifications, oral instructions, or knowledge of materials to be shipped and shipping conditions
• Packs, seals, labels, and affixes postage to prepare materials for shipping, using work devices such as hand tools, power tools, and postage meter
• Builds/repairs shipping crates as required for re-shipment
• Selects appropriate routing of outbound shipments, prepares bills of lading, and maintains records of materials shipped
• The Agent may delegate duties to any qualified assistant as necessary and with management approval, but such delegation does not relieve the Agent of the overall responsibility of the position’s job duties
• Complies with company and department norms, policies, directives, and procedures
• Guarantees reliability and quality of information
• Maintains necessary internal and external contacts
• Suggests improvements to processes and procedures
• Honors and protects confidential and proprietary documents and information
• Satisfies work schedule requirements
• Additional duties may be assigned

Education:

• High School diploma or equivalent
• Employees performing the same job function for a period of 3 years’ or more are considered qualified in the position, independent of the requirements referenced above and need not supply evidence regarding school diplomas, etc.

Desirable:

• Bachelor Degree in Supply Chain/Logistics, Purchasing, or Aerospace

Experience:

• Generally at least 3 years’ of experience in area of responsibility
• Experience in Aerospace or Aviation Shipping & Receiving, loading/unloading, handling, checking, transportation, storage and distribution of spare parts, tools, technical publications and other materials
• 2+ years’ prior work experience in Aerospace purchasing and inventory control
• English fluency
• HAZMAT knowledge
• Forklift experience

Desired:

• Executive Jets/Corporate Repair Station or Military MRO prior work experience

Knowledge, Skills, & Abilities:

• Assignments require thorough knowledge of all possible tasks and responsibilities
• Skills are effectively applied in accomplishing all tasks
• Shipping and receiving techniques
• Aircraft Parts and Tooling knowledge
• Aircraft Part & Supplies basic purchasing techniques & practices
• Basic office skills, internet explorer, MS Excel
• Knowledge of handling hazardous materials DOT – HAZMAT certificate, forklift training
• Valid Motor Vehicle Driver’s License

Desirable:

• MS Excel, Quantum, Lotus Notes

Working Conditions/Environment/ Special Requirements:

• Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations
• Ability to work flexible hours and different shifts if required
• Employees will be subject to the random drug and alcohol testing under FAA regulations

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 39415
Job Location: Fort Lauderdale, FL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 10/11/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Airworthiness Inspector Sr

Description:
PDS is seeking a  Airworthiness Inspector Sr  for an open position in Savannah, GA.

The Senior Airworthiness Inspector physically inspects aircraft, aircraft components, and reviews related paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. 

Essential Functions:
  1. 1. Responsible for all quality control inspections on aircraft/components in the Repair Station.
  2. 2. Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data.
  3. 3. Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting.
  4. 4. Keeps accurate, neat and legible records of the work performed on aircraft/components.
  5. 5. Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner.
  6. 6. Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service.
  7. 7. Ensures aircraft/components are airworthy prior to any flight activities.
  8. 8. Mentors technicians on effective documentation. 


Additional Functions:

  • Accomplishes research of Aircraft Log Books and or computer maintenance programs to identify ongoing inspection programs, status of aircraft within those programs, airworthiness Directive status, and Service Bulletin status.
  • Continually monitors repair station compliance with FAR Part 145 and the FAA accepted site Repair Station and Quality Control Manual.
  • Assists leads and supervisors in training of Airworthiness Inspectors. Promote high standards of quality through instruction and by setting the example.
  • Works with and instructs subordinate mechanics/technicians in troubleshooting and operational/functional procedures.
  • Signs FAA 8130-9 Statement of conformity on projects completed on his/her aircraft.
  • May perform ODA functions as assigned.
  • In support of aircraft certification and final phase testing, may include flight tests on aircraft as required.
  • Performs other duties as assigned. 


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

Education and Experience Requirements:



  • High School graduate/GED. Airframe and Powerplant License required.
  • Six (6) years aircraft/component inspection experience to include (3) years experience on large or mid-size aircraft.

Other Requirements:

  • Proficient in the utilization of Federal Aviation Regulations, FAA forms and documents.
  • Proficient in blueprint reading, use/interpretation of Maintenance Manuals, test specifications and other inspection related documentation as required.
  • Familiar with FAA certification approval processes.
  • Strong written and verbal communication skills. Must be able to effectively prioritize tasks.
  • Strong computer skills. Proficient with Microsoft Word. Minimum 20 WPM typing speed.


Unique Skills:



  • Must be able to support AAP on extended or alternate shifts and weekends.


For Additional Information on this Opening Please Contact
Kellye Roberts
Direct Number: 912-257-4867
Email Your Updated Resume to
kroberts@pdstech.com

 
Job Number: 1710067773
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Kellye Roberts
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000012Yk7AAE&URLSource=cjhunter

Applications Engineer Vice Installation

Description:
UNIQUE SKILLS
Candidate must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1); In-depth knowledge of FAR 25 sub part H (EWIS) design requirements; Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151); Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) preferred Education/Experience: Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs. in the specific technical discipline or 10 yrs. broad engineering experience in several technical disciplines with Bachelors, or 3 yrs. in the specific technical discipline with Masters, or 1 yr. in the specific technical discipline with PhD. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the production of Client products and services.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-785-100301
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Assembler \'A\' (3) - FL

Description:
Chipton-Ross is seeking an Assembler 'A' (3) for an opening in St Petersburg, FL.

Under minimum supervision, performs a wide variety of electronic and electro-mechanical subassembly and assembly operations of a semi-skilled nature to build up and assemble difficult and complex units such as power supplies, modules, chassis drawers, cable harnesses, electronic systems and subassemblies. Determines methods and sequence of assembly operations where complete information is not readily available or follows assembly shop and production operation sheets, wire lists, samples, blue prints, schematic and verbal instructions to perform a wide variety of assembly operations such as wiring, component installation and hand soldering. Must be able to perform the essential duties and responsibilities with or without reasonable accommodation. The duties and responsibilities may change from time to time without notice and include but are not limited to the duties described below.

RESPONSIBILITIES:
Performs complex wiring, soldering and assembly of subassemblies and final assemblies.
Reads and interprets complex wiring diagrams, color codes, schematics and wire lists.
Builds harnesses of high complexity.
Terminates various multi-conductor and coaxial cables.
Utilizing a high degree of proficiency, wires and solders various components within circuits and chassis.
Performs mechanical assembly of high complexity chassis and cabinets.
Occasionally employs basic knowledge of electrical theory and its application to basic wiring and testing using voltage and ohmmeters.
Disassembles, modifies, reworks, refurbishes, reassembles and tests units as required.
Sets up and operates automatic and semiautomatic assembly equipment.
May be required to perform continuity checks and rework.
Complies with ISO procedures and regulations. Maintains a safe and clean work area. Complies with company policies and guidelines regarding inventory control and timekeeping.

REQUIRED EXPERIENCE:
Must be proficient with all hand tools, basic mechanical inspection equipment such as calipers and indicators and electrical test equipment such as multimeters.
Must be proficient in soldering techniques, color codes and component identification.
Must be able to perform assembly calculations with accuracy.
Must be ability to read blueprints and work with small parts.
Requires understanding of concept of Work Orders and Bills of Materials.
Must be able to follow verbal instructions or procedures.
Must have knowledge of computer usage specifically Microsoft Office applications.
Communication skills are required for effective interface with all contacts.

EDUCATION:
High School or technical trade school graduate preferred, or training in military service graduate.

ADDITIONAL EXPERIENCE:
Requires a minimum of five (5) years of progressively difficult related electro/mechanical assembly and wiring experience.

WORK HOURS:
9/80, Full-Time
 
Job Number: 165634
Job Location: St. Petersburg, FL
Rate: Up to $16.75 DOE
Duration: 5 Months
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Christian Martinez-Salceda
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: cmartinez@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic - Aerospace (KS)

Description:
Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures. Functional test and correct, fit form and function of assemblies and components.

Duties:
The Company will provide appropriate assistance in job training to enable employees to perform all necessary job functions including the following:
1. Work with blueprints, changes, specifications, work orders, etc. to assemble and install to quality requirements parts and assemblies.
2. Complete required data gathering transactions to facilitate assembly progression.
3. Setup and perform all manual and automated assembly operations, and portable machine functions required to accomplish assignments.
4. Perform any and all required pickup, rework, fabrication, change incorporation, functional testing or check during or after final assembly and/or assembly progression.
5. Move and/or obtain correct parts, materials, tools, assemblies, etc.
6. Use precision measuring instruments required to accomplish work assignments.
7. Report and/or investigate job handicaps such as: errors in parts, assembly procedures, tools, sequences, etc.
8. Perform routine minor machine maintenance as part of their daily work duties (e.g., where applicable, replacing machine filters, changing standard light bulbs on machines and equipment, maintaining lubrication/coolant levels, etc. as related to basic Total Preventative Maintenance duties).
9. Routinely move product within the immediate manufacturing work area, including across isle, using shop assigned equipment as required and complete transactions necessary to move product to the next operation. On an exception basis, move product to the next operation within a building.
10. Support the continuous flow of product within the manufacturing process by training, coaching and assisting employees of all classification levels.
11. Document any discrepancies according to specification, process, and procedure.
12. Cross trains in inspection and becomes SIA qualified.

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.
• Pressure / Vacuum Test - Perform visual and auditory leak checks in aircraft sections
• Precision Bench Assembly - Assemble precision aircraft parts and assemblies such as landing gear, control linkage etc.
• Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures
• Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
• Assembly / Installation Doors - Pre- assemble, trim, fit , rig , seal, align, and adjust aircraft door systems
Integral Fuel Cell - Apply sealing compounds to seal fuel cell and wing section components
• Inspection - Inspect and document non conformances on final assemblies, subassemblies, systems, and installations
Verifies dimensions of parts using both mechanical and electronic measurement tools and, relative to these inspection duties, initiate and document corrective action for programming issues and other problems.

Setup and operate conventional and Computerized Numerical Controlled (CNC) fastening equipment, similar to Multi-Task Gantry Riveter’s (MTGR’s), Brotje’s , C-Frames, IPAC’s etc., to assemble components in accordance with engineering specifications.

Requirements:
ALL SUBMISSIONS MUST HAVE HAD TO WORK IN ANY OF THE FOLLOWING CAPACITIES:

With Client Direct (Wichita and/or Tulsa)
-or-
With Client Contract (Wichita and/or Tulsa)

Client ID numbers will need to be provided at the top of resumes along with their Rehire Eligibility information

'Travel work' is what's needed e.g. Contractors will work in the 737 fuselage area and 'traveling' throughout the line to resolve/fix issues/rework so existing Spirit Employees can focus on their own assembly work.

MUST HAVE AT LEAST 3 YEARS' EXPERIENCE IN AIRCRAFT ASSEMBLY
Level C - Assembly Mechanics
Must have structural riveting, sealing and wiring experience.

Much have the skill and knowledge to perform in all of the general functions of Assembly Mechanic:

Assembly/Installation Structures
Sub Assembly
Sealer

Each of the functional areas described below:

Sealer - Seal parts, assemblies and sub-assemblies fillet and fay, apply leveling compound or scotch cast etc.

Sub-Assembly - Assemble parts to make sub assemblies using templates, jigs, and fixtures

Assembly / Installation Structures - Assemble structural parts, assemblies, and skins to make larger assemblies
Assembly / Installation Doors - Pre- assemble, trim, fit, rig, seal, align, and adjust aircraft door systems.
 
Job Number: FD-551987KS
Job Location: Wichita, KS
Rate: $30.00/HR
Per Diem: $110.00/WKLY (if applicable)
Overtime: Yes - Possible
Duration: 90-days - (3 months)
Start Date: 10/13/2017
Input Date: 10/10/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

Assembly Tech Wheel and Brake Shop

Description:
PDS Tech, Inc. is seeking an Assembly Technician for an open position in Dallas, TX
Description:

Role and Responsibilities:
****FAA/DOT/Safety Sensitive Position****

  • The Assembly Tech I, disassembles, cleans, and assembles aircraft wheels, brakes, batteries and/or hose assemblies to product specifications and uses hand tools and small power tools to assemble units..



     



  • Receives and prioritizes orders; reserves materials; assembles product. 



  • Creates and closes work orders; answers calls; assists other technicians as needed. 



  • Order entry into system; updates as needed. 



  • Prepares and ships materials (hazardous and/or non-hazardous).



  • Completes special projects and other duties as assigned.




 
Qualifications and Education Requirements:
REQUIRED
  • H. S. Diploma  or  Equivalent
  • Aviation experience or Minimum 2 years of Mechanical experience
  • Ability to use various hand Tools
  • General electrical/mechanical experience in the aviation industry

 
 
Job Number: 1710074066
Job Location: Dallas, TX
Per Diem: No
Duration: 2 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Richard Escobar
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023HmcAAE&URLSource=cjhunter

Assembly Technician- Electrical Integration

Description:
PDS Tech is seeking an Integration Specialist Technician for an open position in Huntsville, AL.
In your role, you will:
*** 
Need to be able to perform Wire harness assembly integration, install instrumentation including Strain Gauges
  • Perform assigned duties as an individual or as a member of a crossfunctional High Performance Work Team (to include supplier and customer representatives), during all phases of assembly, integration and test from developmental prototyping to the execution of production integration activities. Meet customer satisfaction requirements for quality, performance and reliability.
  • Perform functional checkouts and system testing of electrical, electronic, mechanical systems and ground support equipment. Troubleshoot, fault isolate and document nonconformances to correct malfunctions, to component level, with minimal technical support. Perform, as required, approved rework, modification, repairs and incorporation of changes per technical documentation and formal direction to electrical, electronic and mechanical systems.
  • Assist in defining, implementing, completing and monitoring the execution of the work scope. Make recommendations for refinement to equipment and integration processes by conducting studies and evaluations that result in product and process improvements.
  • Analyze product, process & test data, and rejection history to identify root cause for problems and assist with developing corrective action.
  • May be required to perform duties in and around ordnance or other hazardous materials while maintaining a safe working environment. May be required to obtain a security clearance, per specified program requirements.
  • Perform all elements of mechanical, electrical and electronic assembly, integration and test from detail fabrication, buildup of assemblies & subassemblies, through final integration.
  • Select correct parts, materials and tools to perform assigned duties. Duties may include the handling of hazardous waste (if qualified). Handle and protect components and assemblies in accordance with proper practice and procedures.Move materials from place to place within the work area.
  • Perform critical handling tasks and operate special electrical, electronic, mechanical and support equipment. Use and operate shop tools and equipment including precision measuring instruments and equipment including optics and lasers. Operate various types of shop equipment such as band saw, drill press, sander, bench grinder, metal bending equipment and other related machinery on a variety of materials.
  • Perform assembly work to complete assignments. Related tasks may include fabrication, installation, adjustment, fit check, fastener alignment, connections, and subassembly integration of parts and materials.
  • Perform chemical cleaning, surface finishing, painting, marking in accordance with specifications and procedures.
  • Use any electrical and electronic test equipment, instruments and tools required to perform assigned work, including precision measuring instruments and equipment. Connect, operate and/or verify support equipment, set up and check out of electrical, electronic and mechanical systems.
  • Troubleshoot, fault isolate and document nonconformances.
  • Perform related rework and approved repair necessary to accomplish assignments
  • Devise, develop and assemble approved shop aides and devices that may be required to adjust, test or maintain electrical and mechanical systems equipment.
  • Perform self examination and inspection as certified and required.
  • Plan, sequence and organize work operations to meet production schedules and expedite special jobs.
  • Coordinate information to advise others of situations or conditions that will delay work progress and suggest corrective action.
  • Assist others in the performance of their assigned work giving technical assistance to specifications and requirements as required.
  • Set up and maintain charts, logs, records and reports.
  • Maintain licenses, permits and certifications required to perform assigned work.
  • Perform other duties as assigned within the general job classification
  • Maintain a safe clean and orderly work area.

High School Diploma or GED
 
Job Number: 1710072532
Job Location: Huntsville, AL
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 3201 CHERRY RIDGE DR STE A103
City, State: SAN ANTONIO, TX 78230-4824
Phone: 210/524-1496
800 Phone: 866/570-1503
Email: cecjsanantonio@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023B8GAAU&URLSource=cjhunter

Aviation Mechanics - Clearance

Description:
Seeking Experienced Aviation Mechanics for a contract opportunity in San Antonio, Texas!

Work to be performed on a VIP aircraft, 747 platform and active Top Secret Clearance Required.
Several Openings For:
  • General Mechanic
  • Electrical
  • Structures
  • Avionics Tech
  • Quality Inspection
  • Supply Chain Specialist


Great Opportunity for Ex-military/Exiting Military/ and Veterans
Previous military experience a plus!


 
Experience performing routine maintenance, modifications, and rework on VIP - 747 aircraft.
Required- Minimum of 5 years' experience working on 747 platform.
Tools: no tools required
Location: San Antonio, Texas

***Current Security Top Secret Clearance required
US Citizenship Required: Clearance requirements will be used during resume screening. Individuals must hold a current Clearance or Equivalent Clearance/ investigation type to be considered for this position, clearance level must be noted on the resume. Must follow submittal procedures below for consideration. No phone calls please, only candidates that provide resumes with the job ID number will be contacted and considered for the opportunity.

**submittal must reference Job ID number 1710063637

Camille Zunker- czunker@pdstech.com
 
Job Number: 1710063637
Job Location: San Antonio, TX
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Camille Zunker
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GBZ0AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Electrical Engineer - Custom Engineering

Description:
Avionics Electrical Engineering Consultant- Custom Engineering

Location: Savannah, GA
Rate: $61.00 - $68.00/HR
Duration: Long Term contract
Shift: First

Unique Skills:
-Must be able to substantiate experience at creating engineering design/compliance data that's complaint to FAA/Company ODA requirements.
- Looking for a seasoned/experienced electrical engineer/designer/integrator with Company experience on GIV, GV, G450, G550 and if possible G650.
- Having GII and GIII and MidCabin experience is a bonus.
- The person needs to be proficient in AutoCad and as a bonus either CATIA and or SmarTeam.
- Mainly AutoCad and of course experience using Microsoft Word/Excel.
- Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing.
- Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education:
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services.

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7314
Job Location: Savannah, GA
Rate: 61-68
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Engineer

Description:
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

Position Roles & Responsibilities:
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.
- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

Experience Required:
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: CT1819
Job Location: Stratford, CT
Rate: 62.00
Per Diem: Possible
Overtime: Possible
Duration: 15 months
Input Date: 10/04/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

Avionics Installer- 2nd shift

Description:





PDS TECH INC is currently looking for Avionics Installers for our customer in Long Beach

If you are interested and available, please call Karla Pelonis (800) 234-8644 x 20210 and forwarded your updated resume to kpelonis@pdstech.com

 



Avionics installation or maintenance history required. Computer literate required. 



Education and Experience Requirements:



High School diploma/GED. Knowledge of applicable regulatory requirements and customer specifications. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience. Ability to read and interpret basic blueprints and schematic diagrams.


Position Purpose:



Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. 

Principal Duties and Responsibilities:

Essential Functions:
1. Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. 2. Maintains required logs and records.
3. Completes tasks within allotted time frame.
4. Ensures that work accomplished meets applicable regulatory requirements and customer specifications.
5. Checks all work and ensures a defective free assembly prior to final inspection.
6. Complies with the company FOD program, tool control program, 5-S program and all safety regulations.
7. Maintains a neat and orderly work area. 

Additional Functions:
1. Properly care for and maintain shop equipment and tools as assigned by Supervisor.
2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.)
3. Performs other duties as assigned. 

Other Requirements:
1. Strong written and verbal skills required.
2. Computer skills and general software knowledge necessary.





 





 
Job Number: 1710073124
Job Location: Long Beach, CA
Per Diem: Yes
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 3130 S HARBOR BLVD STE 100
City, State: SANTA ANA, CA 92704
Phone: 714/540-7900
800 Phone: 800/234-8644
Fax Phone: 714/540-8092
Email: cecjcostamesa@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023FS4AAM&URLSource=cjhunter

Avionics UT-ENG-3104MST

Description:
DESCRIPTION
Supports, performs and manages development, design, integration and test function and project teams of Avionics/flight control systems, including electronics, SW, hydraulics, etc. Analyzes product/system designs, applying knowledge of technology and materials to ensure a design that considers functionality, appearance, FAA compliance, availability, safety and cost.

POSITION ROLES & RESPONSIBILITIES
- Create Catia V5 hydraulic and mechanical flight control layouts, installations, assemblies, details.
- Create, release, and revise Catia V5 engineering detail, assembly, installation drawings and bill of materials using Enovia Matrix, LCA.

- Work closely with various design groups to coordinate designs and establish aircraft interfaces.
- Work closely with aircraft final assembly shop personnel.
- Work closely with various suppliers.

EXPERIENCE REQUIRED
- Minimum of a BS in Engineering Design required
- High level communications skills both written and oral.
- In-depth knowledge of Catia V5, Enovia Matrix and LCA functionality.
- Experience with Catia V5 Tubing function.
 
Job Number: 17-796-1819
Job Location: Northeast
Rate: OPEN
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics/Electrical Engineer

Description:
Unique Skills:
Looking for a seasoned/experienced electrical engineer/designer/integrator. The person needs to be proficient in AutoCAD and as a bonus either CATIA and or SmarTeam. Mainly AutoCad and of course experience using Microsoft Word/Excel. Experience / familiarity with Cabin Management Systems, Flight Management Systems, Flight Directors, Autopilots, TCAS, EGPWS, Weather Radar, DME, Transponders, CPDLC, ADS-B, FANS, Electrical generating systems, Cabin Lighting Systems, Communication Systems (HF, VHF, UHF) Satellite Communications, Satellite Television, Cabin WLAN, Cabin LAN, telephony systems, antennas, wire routing. Familiar with FAA and EASA regulatory requirements. Certification background is a bonus.

Education/Experience:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Principal Duties and Responsibilities:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area
 
Job Number: 24-168
Job Location: Savannah, GA
Rate: $61-$68/hr.
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/13/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

CREO Product Definition & Verification (Checking) Designer III/IV

Description:
Creo Product Definition & Verification (Checking) Designer III/IV

Location: Canoga Park, CA
Pay Rate: DOE ($45/hr - $60/hr)
Duration: 6 month W2 contract
Shift: Regular 40 hour week, possible overtime
** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-Under limited general direction and following established procedures in accordance with contractual requirements and Company policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure.
-Typical responsibilities include: Prepare product definition (CAD models and drawings).
-Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

Breakdown:
40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.
30% - Performs design calculations to validate any phase of design requirements.
20% - Estimation of resources and schedule required to complete a design activity and training to staff.
10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills:
-10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education:
-Requires a Bachelor’s degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Required Skills:
CREO GEOMETRIC DIMENSIONING GEOMETRIC TOLERANCING WINDCHILL AEROSPACE

Additional: PACKAGING ENGINEERING HARNESS CABLING
 
Job Number: 8026
Job Location: Canoga Park, CA
Rate: 45-60
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Calibration Technician -

Description:
JSG is looking for a Calibration Technician for a 15 Month Contract Opportunity with our client in Coatesville, PA


ASSIGNED DUTIES:

Recall calibrated tooling periodically in accordance with company's master calibration schedule.
Send complex calibrated tooling out to a calibration vendor for periodic inspection/maintenance.
Perform simple calibrations in-house in accordance with Sikorsky and NIST (National Institute of Standards and Technology) procedures.
Maintain certification documentation for each piece of Sikorsky PA’s calibrated tooling.
Follow broad instructions and general methods to work from metrology procedures and standards, tool designs, engineering drawings, etc., to perform inspection and calibration duties.
Set up and operate a variety of precision gages and instruments, and perform complex layouts, to inspect and calibrate tools to metrological standards.
Repair, adjust micrometers, height gages, vernier calipers
Maintain close liaison with other departments to resolve metrology problems.
Troubleshoot/repair testing equipment; have a working knowledge of electricity, circuitry, and mechanical components.
Demonstrate knowledge of the technical standards for establishing calibration set out by the American Society of Testing and Materials.
Skills Required:

Candidate must demonstrate excellent math skills (emphasis on trigonometry and geometry) and be able to analyze numerical data
Candidate must demonstrate computer literacy; with emphasis on Microsoft Access and Excel for data management.
Experience Required:

Minimum High School Diploma or Equivalent Required
Formal education in Calibration Technology; or American Society for Quality (ASQ) Certified Calibration Technician certification Required
Demonstrated aerospace metrology experience or Military calibration experience required
 
Job Number: 358918
Job Location: Coatesville, PA
Rate: $21.50hr
Per Diem: no
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Circuit Card Assembly Specialist

Description:
PDS Tech Inc. is seeking Circuit Card Assembly Specialists for an expanding program in Huntsville, AL.
  • Performs all Circuit Card production assembly operations on electronic/electrical assemblies and subassemblies.
  • Performs simple rework and modification to circuit card parts and assemblies.
  • Provides maintenance on machines and tooling and machine set up tasks to prepare machines for production activity following the machine inspection checklists.
  • Documents results in accordance with applicable procedures.
  • Collects and inputs data for statistical process control analysis.

Work related skills equivalent to 3 years of circuit card related technical experience
Associates (2-year) degree in electronics, mechanical or other technical discipline 

Basic Manufacturing Skills

Basic Electricity

Circuit Card Assembly (CCA) experience

J-standard soldering certified

 
 
Job Number: 1710072262
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Enrique Perez
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023APlAAM&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Commercial Avionics Systems Engineer -

Description:
Johnson Service Group (JSG) is seeking a candidate for a Commercial Avionics Systems Engineer to be an integral part of a small and fast-paced team supporting the engineering projects, product development, and test.

Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Airframes may include, but are not limited to S-76, S-92 and their derivatives, including integration of new technologies into the S-92.

Primary Responsibilities

Development of requirements
System Integration
Generation of lab and aircraft test procedures
Troubleshooting avionics issues on test, production and fielded aircraft
Support program management reviews
Beneficial Experience

FAA and foreign certification (preferred)
DO-178B, DO-160 and DO-254 processes (preferred)
Technical project management (preferred)
Supplier technical management (preferred)
Pilot or A&P experience (preferred)
Educational Requirements:

BS Engineering in a related field w/7+ years relevant professional experience
Will consider non-degreed candidate's who have equivalent professional experience (11+ years)
 
Job Number: 356482
Job Location: Trumbull, CT
Rate: $56hr
Per Diem: yes
Overtime: possible
Duration: 15 months
Start Date: asap
Input Date: 10/19/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Martinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

Completions Electrical Design Engineer

Description:
• Experience with Aircraft Cabin Interiors and Systems to include but not limited to: Cabin Management System, Cabin Entertainment System, Cabin Lighting, Cabin Switch Controls, Telephone System, Satellite communications, Water System, Waste System, EWIS, Cabin interior monuments and Seats
• Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-183
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer

Description:
Must have secret clearance

Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.
 
Job Number: 40842
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 12/21/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Components Engineer - Level 2 - TX - C

Description:
Chipton-Ross is seeking a Components Engineer - Level 2 for an opening in Dallas, TX.

RESPONSIBILITIES:
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

REQUIRED EXPERIENCE:
Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

PREFERRED EXPERIENCE:
Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80, 1st Shift

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.


 
Job Number: 164049
Job Location: Dallas, TX
Rate: Up to $75.00 DOE
Duration: 12 Months
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Kevin Suk
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: ksuk@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 2 / Obsolescence / Parts Management / Must have ability to obtain a Secret security clearance TX

Description:
159780
Requirement# MFC-REQ-1421
Work location Dallas, TX
Work Week 9/80
Priority
Needed Date 07/05/2017
End Date 07/05/2018
Number of Resources 1
Security Clearance Ability to Obtain Secret
(Prime Contract:, Can start w/o clearance:Yes, Interim Clearance Sufficient:Yes)

Type of Service: Engineering
Title: Components Engineer - Level 2
Description
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

Skill/Experience/Education
Mandatory:

Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers. Must have ability to obtain a Secret security clearance.
Desired:

Previous experience with obsolescence monitoring tools is a plus (i.e. Qstar, TacTech, Part Miner, Promiere) as well as expertise in all component technologies. Bachelors (or higher) Degree in Electrical Engineering, or other related technical discipline.

Skill Matrix

Parts Management Working with designers to select components for use in designs. 0-3 Years Yes
Obsolescence Work with component lists and industry tools to evaluate part availability and determining path forward when issues are identified. 0-3 Years Yes



Interview Required Yes
Max Pay Rate 75.00 USD
Shift 1st Shift
OT Allowed No
Travel No
Non-Exempt
 
Job Number: JE-1421
Job Location: Dallas, TX
Rate: 75/hr max
Duration: 12 month contract
Input Date: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Components Engineer - Level 3

Description:
Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Duration: 1 year contract
Shift: 4x10

**MUST have an Active Secret Clearance or have had one within the last two (2) years**

Description
- Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements.
- Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components.
- Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records.
- Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components.

Skills:
- Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
- Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages.
- Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance.
- The candidate will periodically be required to make presentations to program management and customers.

Skill/Experience/Education
Mandatory:
- Five years or more of experience in Component Engineering.
- Must be proficient with computer tools such as MS Excel.
- Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position.
- Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools.
- Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.
 
Job Number: 7694
Job Location: Orlando, FL
Rate: $40.00 - $45.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 1 yr
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

Components Engineer - Level 3 (3) - FL - C

Description:
Chipton-Ross is seeking a Components Engineer - Level 3 (3) for an opening in Orlando, FL.

RESPONSIBILITIES:
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM's, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

REQUIRED EXPERIENCE:
Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
4/10, Full-Time

MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 164497
Job Location: Orlando, FL
Rate: Up to $45.00 DOE
Duration: 12 Months
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: tjones@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Components Engineer - Level 3 with active secret FL

Description:
Requirement #MFC-REQ-1448
Work Location Orlando, FL (5600 Sand Lake Rd. Orlando, FL 32819, Orlando, Florida )
Work Week 4/10
Needed Date 09/11/2017
End Date 09/03/2018
Number of Resources 3

Active Secret to start


Title:Components Engineer - Level 3

Description
Contributes to successful project completion by participating in the resolution of issues such as conflicting design requirements, unsuitability of standard material, and difficult coordination requirements. Plans and conducts the analysis, inspection, design, test, and/or integration to assure the quality of products or components. Performs quality engineering reviews of design documentation for compliance with stated requirements, including vendor quality manuals and company quality records. Applies statistical process control (SPC) methods for analyzing data to evaluate the acceptability of components. Skills: Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Responsible for the performance of detailed part level obsolescence management consisting of monitoring BOM’s, solving issues, scheduling and managing implementation of fixes, finding new sources, and reacting and solving issues to ensure no production line stoppages. Candidate will work closely with design engineers, interface with other functional areas and vendors, and enforce PMPCP Compliance. The candidate will periodically be required to make presentations to program management and customers.

Skill/Experience/Education
Mandatory:

Five years or more of experience in Component Engineering. Must be proficient with computer tools such as MS Excel. Should be comfortable working in a team environment and willing to shadow Senior Components Engineer at the start of the assignment to develop the necessary skills for this position. Also must be able to learn task specific tools such as Q-Star, Partminer and web based obsolescence tools. Must have good communication skills and able to effectively work with manufacturers and other external part suppliers.


Interview Required Yes
Max Pay Rate 45.00 USD

OT Allowed Yes (#hours allowed: 10, Pre-Approval Reqd.:Yes)
Non-Exempt
 
Job Number: JE-1448
Job Location: Orlando, FL
Rate: 45/hr max
Duration: 12 month contract
Input Date: 10/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - DER Electro-Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Description:
Unique Skills:

- Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of ODA projects and released engineering deliverables across the G650, G550, and G450 platforms - Previous experience in the above noted areas and aircraft platforms, as well as with associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 116381
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - NC Eng II

Description:
Unique Skills:

Must be proficient with Catia modeling, drafting, and Catia NC Mill Function.


Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.


Position Purpose:
Under general supervision, perform activities related to numerical control (NC) programming, including machining methods, tooling concepts, and programs for NC milling machines and lathes.

Principle Duties and Responsibilities:

Essential Functions: 1. Conduct a thorough analysis of engineering drawings, tool design drawings, and/or electronic models, to determine the optimal machining methods, selection of machine tool, and material cut size. 2. Interact with planners, tool designers, engineering, and customers as required, to finalize plan. 3. Develop cutter motion logic per operation sequence, selecting proper spindle speeds and feed rates. 4. Perform a thorough check on all aspects of the program and verify cutter paths through the utilization of Vericut. 5. Develop operator set-up sheets for numerical control machines. 6. Develop flat pattern mylars and templates as required. 7. Produce 2-D Catia tool drawings as required.

Additional Functions: 1. May represent department in contacts with other departments, and may be required. to coordinate efforts with vendors or customers. 2. Assist in formulating Numerical Control policies, procedures, and specifications as required. Perform other duties as assigned.

Other Requirements: 1. Good verbal and written communication skills required. 2. Must be able to read and interpret blueprints. 3. Familiarity with various machining methods, technical writing, and computer use. 4. Must possess good drafting, math, and geometry skills. 5. Must be proficient with Catia modeling, drafting, and Catia NC Mill function.
 
Job Number: 116721
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: SUITE 200
5051 PEACHTREE CORNERS CIR

City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification (Checking) Designer III/IV CA

Description:
160469/7457002

Job Title: Creo Product Definition & Verification (Checking) Designer III/IV
Canoga Park, CA
60/hr max

Duties:

** Candidates must be U.S. Citizens **** Permanent residents are NOT eligible for this role **** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Under limited general direction and following established procedures in accordance with contractual requirements and Aerojet Rocketdyne policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.

Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.

Skills and Experience:
Required Skills:
CREO
GEOMETRIC DIMENSIONING
GEOMETRIC TOLERANCING
WINDCHILL
AEROSPACE
Additional Skills:
PACKAGING ENGINEERING
HARNESS CABLING

# of Positions: 5

Location:
Canoga Park, CA


Schedule:
Start Date: 11/06/2017
Estimated End Date: 05/06/2018
Hours Per Week: 40.00
Hours Per Day: 8.00

Schedule Notes: Regular 40 hour week. OT possible.
 
Job Number: MB-7457002
Job Location: Canoga Park, CA
Rate: 60/hr max
Duration: 6 month contract
Input Date: 11/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Creo Product Definition & Verification Designer III/IV

Description:
Under limited general direction and following established procedures in accordance with contractual requirements and policy and procedures, this position performs engineering design assignments for preparation of engineering design documents and maintaining the design disclosure. Typical responsibilities include: Prepare product definition (CAD models and drawings). Perform Verification of Product Definition (Checking) includes models, drawings and PLM attributes and relationships.

40% - Create, check and maintain design product definition (Models & Drawings) for engineering designs. This includes, but is not limited to, preparation of design layouts and/or preliminary conceptual design layouts, as well as outsourced design project leadership.

30% - Performs design calculations to validate any phase of design requirements.

20% - Estimation of resources and schedule required to complete a design activity and training to staff.

10% - Provide technical guidance to less senior CAD designers and to design support personnel.

Skills: -10 years of experience with CAD systems (Creo 2.0 preferred) along with experience using CAD database management and PLM tools (Windchill prefered).
-Knowledge of Mechanical and Electrical harnessing and packaging of Aerospace hardware required.
-Expert knowledge of geometric dimensioning and tolerancing (ASME Y14.5).
-ASME Certification in GD&T is a plus.
-Ability to read and interpret product definition and related specifications.
-Electronic markup tools and the ability to work paperless is required.
Education: -Requires a Bachelor's degree in an appropriate discipline and at least 5 years of related experience or an equivalent combination of education.
 
Job Number: CA39225
Job Location: Canoga Park, CA
Rate: up to $60.00
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: Nov 2017
Input Date: 10/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Karen Wilkes
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

DER Electro-Mechanical Systems Eng Landing Gear & Hydraulic Systems

Description:
DER Electro Mechanical Systems Eng Landing Gear Systems & Hydraulic Systems

Savannah, GA
Rate: $135/HR
Long Term contract

Unique Skills:

- Consultant DER or EAR with current FAA authorizations in Landing Gear and related Systems and Hydraulic Systems areas - Currently in good DER or EAR standing with the FAA - Currently up to date with all required FAA DER or EAR training, certification, etc. - Eligible to be recognized and approved by the Company ODA to perform DER and/or EAR functions, including but not limited to signing 8100- and related forms in the above noted areas, in support of Company ODA projects and released engineering deliverables across the G650, G550, and G450 platforms - Previous Company experience in the above noted areas and Company aircraft platforms, as well as with Gulfstream associated Engineering release processes and procedures, in a DER or EAR and Senior Engineer role is preferred - US Citizen only
 
Job Number: 7930
Job Location: Savannah, GA
Rate: $135
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: patrick@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design & Analysis Engineer

Description:
Company is currently seeking an experienced Electrical systems Designer to perform Electrical Loads Analysis and power systems modification. Candidate will support Boeing Global Services & Support Aircraft. This
includes Airborne Surveillance Command and Control aircraft from around the world including, NATO, French, Saudi, US, UK, Japan AWACS, B-52 Bombers, C32/C40 VIP transports, the E-4 National Airborne Operations Center, KC-767
International Tankers and VC-25 presidential transport.

This position is located in Oklahoma City, Oklahoma

Job Responsibilities will include but not be limited to:
- Develop and document electrical load analysis based upon system design.
- Provide coordination memos with impact analysis for systems design changes.
- Present results of analysis at customer design reviews (PDR, CDR)
- Publish reports detailing the aircraft electrical load and bus capability.
- Utilize existing software to complete Electrical Load Analysis
- Direct a team of engineers providing individual direction.
- Leverage existing tools and help develop a path forward for a common tool for ELA.
- Works on unusually complex technical problems and provides solutions which are highly innovative and ingenious.
- Develops advanced technical ideas and guides their development into final product
- Serves as organization spokesperson on advanced projects and programs. Acts as advisor to management and customers on advanced technical research studies

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Previous experience with aircraft power distribution and architecture desired.

**This position requires the ability to obtain a U.S. Secret Security Clearance, which the U.S. Government requires U.S. Citizenship.
 
Job Number: 27265
Job Location: OK
Rate: open
Per Diem: split
Overtime: possible
Duration: 9 months
Start Date: asap
Input Date: 10/20/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

Design Checker

Description:
1. Review 3D engineering data for conformance to requirements as directed.
2. Check parts for fit, form and function to the extent that information is available.
3. Must have experience in Product Lifecycle Management (PLM) processes and tools, checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to requirements as directed.

Checkers are responsible for determining the acceptability of data in the following areas:
1. Accuracy and completeness of engineering product definition data, including CAD and PDM data.
2. Proper application and compliance with all Engineering and customer drawing requirements.
3. Use and understanding of GD & T a must.
4. Dimensioning and tolerancing including familiarity with ASME Y14.5.
5. Application of best drafting and design practices and procedures.
6. Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
7. Advise Design personnel regarding company drawing and design practices and procedures.
8. Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
9. Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
10. Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
11. Knowledge of company parts list & PdocM, a plus.
12. Knowledge of CHS, EWIS, Electrical harness Design a plus but not required.

Essential Duties and Responsibilities
1. Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
2. Ensures designs meet customer criteria, quality standards and FAA requirements.
3. Adheres to budget and project schedules.
4. Provides design guidance and feedback to other engineering personnel.
5. Other duties as assigned.
6. Knowledge of industry design and documentation standards.
7. Experience with mechanical assemblies and manufacturing technique design.
8. Ability to work independently and cross-functionally.
9. Experience in communicating with employees/teams in productive and efficient manner. • Strong communication and problem-solving skills.
10. Knowledge of Excel, Share Point software, Microsoft Office a plus

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-191
Job Location: Savannah, GA
Rate: $50.00 - $55.00
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Design Engineer
 
Location: Plymouth, MI
Duration: 12 months
 
Description:
Client is a global leader in automotive seating. With 75,000 employees operating in 230 manufacturing/assembly plants in 33 countries worldwide, we produce and deliver automotive seating for all vehicle classes and all major OEMs. From complete seating systems to individual components, our expertise spans every step of the automotive seat-making process. Our integrated, in-house skills allow us to take our products from research and design all the way to engineering and manufacturing – and into more than 25 million cars every year.
 
Overview:
An engineer in product design with good communication skills to work on vehicle Seat Metals and Mechanisms. The engineer will be responsible for designing seat mechanisms and structures for the program and/or product and must demonstrate the ability to plan, organize and deliver engineering program
 
Core Responsibilities:
- Executing robust designs, manufacturing feasibility, high quality on drawing releases, prototype parts and production parts.
-  Help solve design issues by utilizing the Basic Engineering Process (BEP) process and his knowledge of lean engineering. Complete A3's which were presented in weekly and executive design reviews for these issues.
-  Help prepare documentation and gather data for engineering xSO signoff. Exposure to the product development process and interact with Subject Matter Technical Experts (SMTEs) throughout the assignment.
-  Support issue resolution and on-time execution for DV & PV testing phases by coordinating test timing, seat builds, and teardowns. This exposure allows for acquisition of knowledge in seat regulations, strength, durability, and tactical planning.
-  Support customer and DV/PV test builds here in Plymouth. Exposure to Design For Assembly and Manufacturing (DFAM) principles. Gain understanding of the interaction between design and manufacturing in product development and key cost drivers.
-  Acquire knowledge in Design for Cost to evaluate various engineering design changes in CAD while at the same time understanding the cost impact of those changes. This enables the team to assess the impact of changes in the ideation phase while still understanding a high level cost impact of those changes.
 
Additional Responsibilities:
-  Balancing multiple requirements from differing internal functional groups, Subject matter Experts and the customer to find optimized technical solutions to meet objectives such: as costs, performance, timing and launch.
 
Basic Qualifications:
-  Completed a 4 year B.S. degree in Mechanical or Electrical Engineering (not looking for recent Master's graduates).
-  CAD experience – Proficient in CATIA v5 with 5 years' minimum experience.
-  The engineer needs to have good analytical skills and work effectively with customers / suppliers and the development team.

If interested then please send updated resume at ravi@iconma.com
 
Job Number: 17-16587
Job Location: Plymouth, MI
Input Date: 10/02/2017
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer (Mobile Test Equipment Support)

Description:
Role: Design Engineer (Mobile Test Equipment Support)
Location: Torrance, CA
Duration: Full Time/Direct hire

Role Description:
As the Design Engineer for Global Mobile Test Equipment (TE) support you’ll be a primary motivator and contributor to deploying our TE Systems at various customers around the world, upgrading them when needed, maintaining them under service contracts, and building intimate customer relationships on the front line. At your home base, you will perform the analysis, conceptual design, development, and testing of complex control test equipment used on many military, and commercial aircraft components. Many new applications will require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate.

Responsibilities:
• Travel to many customer facilities around the world, install test equipment and troubleshoot customer issues
• Perform upgrades and maintenance of our TE, keeping it in top operating condition and visually appealing
• Develop strong relationships with the customers and users of the TE
• Identify sales opportunities while on travel for clients sales engineers to pursue
• Build project plans for the successful testing of new products from start to finish.
• Conceptualize and design automatically controlled mechanical/hydraulic test rigs.
• Operate either independently or as part of a design/development team, which includes other Department engineers
• Be concerned with system or component performance and integration, both being achieved within budget and prescribed schedules
• Coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments
• Communicate with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design
• Possibly provide direct supervision of up to four subordinate engineers and/or project or product-engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.

Required experience/Skills
• 5 + years of experience with design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro-pneumatic servo-mechanisms for mechanical and hydraulic test rigs.
• Hands-on integration and troubleshooting experience preferred.
• A proven record of successful development programs working as a part of a project team
• Experience in the areas of Requirements Definition, Integration, V&V, modeling & simulation with project management.
• Since this individual will often be seen by customers as the responsible technical representative of the company, you must be able to communicate fluently to a wide variety of audiences.
• Interpersonal skills are important in this role

Education:
• Bachelor of Science’s degree in Mechanical Engineering, probably an advanced degree


Please share resumes to avasanta@butler.com. Thanks
 
Job Number: 52515
Job Location: Torrance, CA
Rate: open
Per Diem: no
Overtime: possible
Duration: full time / direct hire
Start Date: asap
Input Date: 10/12/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Arun
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Test Equipment

Description:
Design Engineer - Test Equipment

Direct Hire

Torrance, CA




Responsibilities include:
•Designing equipment for the successful testing of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new product.
•Plan and conduct efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria.
•Devise new approaches as while our products are similar, each one is different enough that it requires different testing mechanisms.
•Be a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. (The products are generally unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate.)
•Will operate as part of a design/development team, which includes other department engineers with his/her primary concern being component design.
•Must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.
•Must have self starting instincts and strong analytical skills.
•Requires some travel and the participation in presentations to customers.


***In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the design engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing.
•Contribute to the development of new product requirements through consulting with customers and sales personnel.
•Validate conceptual problem solutions by performing trade studies and analyses.
•Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
•Operate as a key element in a team of creative, independent individuals.
•Represent company in a manner consistent with its technical reputation.
•Create reliable designs through a comprehensive experimental development test program.
•Document designs, analyses, and test results with accurate and concise reports.



Education:

BS Degree in Mechanical Engineering, plus six years minimum of design/development engineering experience.

Please send resume to bnorman@butler.com
 
Job Number: 52514
Job Location: Torrance, CA
Duration: FTE
Start Date: ASAP
Input Date: 10/12/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Test Equipment - direct hire CA

Description:
4984
Job title: Design Engineer - Test Equipment

Number of openings: 1
Job type: Engineering/IT/Professional
Position location: Torrance - CA
Employment type: Direct
OT exempt: No


Shift: 1st
Education Requirement: MS/MA
Driving on company time?: No
Maximum Hourly Pay Rate: 65
Start Date: 10/30/2017
Tentative End Date: 10/30/2018

Job Description

Function: As a Design Engineer - Test Equipment, you'll be responsible for designing equipment for the successful testing of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog. Leveraging your experience you'll plan and conduct efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches as while our products are similar, each one is different enough that it requires different testing mechanisms.

You'll be a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. You'll generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. You must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

As you can see, this job will take advantage of knowledge and experience and keep you challenged.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, you'll then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

Essential job functions:
1. Contribute to the development of new product requirements through consulting with customers and sales personnel.
2. Validate conceptual problem solutions by performing trade studies and analyses.
3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.
4. Operate as a key element in a team of creative, independent individuals.
5. Represent Moog in a manner consistent with its technical reputation.
6. Create reliable designs through a comprehensive experimental development test program.
7. Document designs, analyses, and test results with accurate and concise reports.

Required skills:
• As an alternative, you would have a BS Degree in Mechanical Engineering plus six years minimum of design/development engineering experience.
• To fulfill the demands of design and development of new products you must have self starting instincts and strong analytical skills.

A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.


Education: Minimum of an MS Degree,in Mechanical, Engineering plus three years of design/development engineering experience.

Other Requirements
This is a Direct Placement Request.
 
Job Number: JE-4984
Job Location: Torrance, CA
Rate: 65/hr max
Duration: DIRECT HIRE
Input Date: 10/30/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer for Global Mobile Test Equipment Support - direct hire CA

Description:
Request number: 4985
Job title: Design Engineer for Global Mobile Test Equipment Support

Number of openings: 1
Job type: Engineering/IT/Professional
Position location: Torrance - CA
Employment type: Direct
OT exempt: No


Shift: 1st
Education Requirement: BS/BA


Driving on company time?: No
Minimum Years of Experience:
Maximum Hourly Pay Rate: 65
Start Date: 10/30/2017
Tentative End Date: 10/30/2018

Job Description

Function: As the Design Engineer for Global Mobile Test Equipment (TE) support you’ll be a primary motivator and contributor to deploying our TE Systems at various customers around the world, upgrading them when needed, maintaining them under service contracts, and building intimate customer relationships on the front line. At your home base, you will perform the analysis, conceptual design, development, and testing of complex control test equipment used on many military, and commercial aircraft components. Many new applications will require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate.
Essential job functions: • Travel to many customer facilities around the world, install test equipment and troubleshoot customer issues
• Perform upgrades and maintenance of our TE, keeping it in top operating condition and visually appealing
• Develop strong relationships with the customers and users of the TE
• Identify sales opportunities while on travel for Moog's sales engineers to pursue
• Build project plans for the successful testing of new products from start to finish.
• Conceptualize and design automatically controlled mechanical/hydraulic test rigs.
• Operate either independently or as part of a design/development team, which includes other Department engineers
• Be concerned with system or component performance and integration, both being achieved within budget and prescribed schedules
• Coordinate the work of drafters, technicians, designers, analysts, manufacturing engineers and others who assist in specific assignments
• Communicate with the involved Division support personnel, keeping them informed of progress and educating them on the operation and performance of the design
• Possibly provide direct supervision of up to four subordinate engineers and/or project or product-engineering technicians. This would include setting their workload and priorities, counseling and conducting performance appraisals.
Required skills: • 5 + years of experience with design, analysis, and development of complex electro-hydraulic, electro-mechanical, or electro-pneumatic servo-mechanisms for mechanical and hydraulic test rigs. Hands-on integration and troubleshooting experience preferred.
• A proven record of successful development programs working as a part of a project team
• Experience in the areas of Requirements Definition, Integration, V&V, modeling & simulation with project management.
• Since this individual will often be seen by customers as the responsible technical representative of the company, you must be able to communicate fluently to a wide variety of audiences.
• Interpersonal skills are important in this role
• US Citizen/Permanent resident
Scope:
Education: • Bachelor of Science’s degree in Mechanical Engineering, probably an advanced degree

Other Requirements
This is a Direct Placement Request.
 
Job Number: JE-4985
Job Location: Torrance, CA
Rate: 65/hr max
Duration: DIRECT HIRE
Input Date: 10/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Design Engineer, Flight Test Instrumentation

Description:
Our client in Greensboro, NC is seeking Flight Test Instrumentation Design Engineers

General Summary:
The Flight Test Instrumentation Design Engineer position is responsible for the design, development, and coordination equipment to support Flight Test operations.
 
Duties and Responsibilities:
  1. Designs, develops, coordinates, equipment, and Installations, to support Flight Test operations.  Typical equipment and installations including ballast, data booms, cockpit displays, antennas, racks, and various transducers (acceleration, pressure, temperature, displacement, etc.).
  2. Creates engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation.
  3. Supports fabrication and installation of test equipment.
  4. Resolves issues related to design, documentation, procurement, fabrication, and installation.
  5. Coordinates designs for Instrumentation Installations.
  6. Monitors installation progress for support of upcoming flights.
  7. Coordinates aircraft configuration with the Ground Station which will require operational testing out of the Greensboro facility as well as off-site testing as required.
  8. Designs structural products and components of products to support Flight Test Instrumentation.
  9. Performs other duties as assigned.


Education, Work Experience, Certification and/or Licensure:
  1. Bachelors’ degree in Aerospace Engineering, Electrical Engineering, Engineering Technology other related field preferred.
  2. 5+ years of directly related experience.

Knowledge, Skills and Abilities:

  1. Proficiency in 3D multiple component designs and 2D fully dimensional and tolerance drawings.  CATIA V5, PLM systems, TeamCenter strongly preferred.
  2. Strong Microsoft Office Suites (Word, Excel, and PowerPoint) strongly preferred.
  3. Strong computer operating systems skills.
  4. Excellent oral and written communication skills.
  5. Excellent interpersonal skills.
  6. Experience with aircraft data acquisition systems.
  7. Experience with FAA regulations.
  8. Excellent analytical skills.

Physical Requirements:

  1. Incumbents may be routinely exposed to equipment operational noise heat-cold-dust, and/or aircraft equipment, parts, or fuel odors.
  2. Incumbents may be required to stand, sit, squat, walk, bend, move, reach, or stretch for prolonged time periods with no restrictions, as required by job duties.
  3. Work in a safe and professional manner while adhering to all regulatory requirements (FAA, OSHA, DOT, EPA, State, and Federal regulations, etc.).
  4. Read, hear, speak, and see with no restrictions, as required by job duties.
  5. Comprehend and adhere to management directions and/or safety instructions with no restrictions.
  6. Effectively communicate in Business English language.
  7. Pull, push, carry, lift, or move items up to 10 lbs. throughout the work shift without assistance, as required by job duties.
  8. Pull, push, carry, lift or move materials/people/items/equipment weighing up to 50lbs or more during the work shift, with the use of Company provided “reach assistance technology” or “movement assist technology” (fork-lifts, pallet jacks, pulleys, dolly’s, robotics reach equipment, people movers etc.), as required by job duties.


PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
Job Number: 1610060142
Job Location: Greensboro, NC
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Earl Sawyer
Address: 2154 N CENTER ST STE 405D
City, State: NORTH CHARLESTON, SC 29406
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Fth3AAC&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Support and Training Instructor

Description:
Design Support and Training - Instructor - Tech Spec II
Savannah, GA
Rate:$60-$62

Unique Skills:

CATIA v5 experienced with 5000+ hours. All Level 1 tools CATIA v5 (Part Design, Assembly, Drafting). Level 2 tools CATIA v5 Generative Surfacing, Free Style Shaping, Generative Sheetmetal, Generative Stress Analysis. Other tools: CATIA v5 Composites, Electrical EHI, Capitol Harness, Tubing experience a plus. Quantitative experience with Geometric Dimensioning and Tolerances a plus. Experience working within PDM systems such as Enovia, SmarTeam or NX/Teamcenter. Formal Classroom instruction experience required for CATIA and PDM.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 2. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 6620
Job Location: Savannah, GA
Rate: $60-$62
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS Flammability

Description:
Velocity represents an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. They are a small but rapidly growing company in Seattle, WA that was founded in 2001. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.

The strategic purpose of the Test and Evaluation (T&E) Support Unit is to provide comprehensive, full-service aerospace flight-testing and evaluation services. The Test and Evaluation Support Unit provides four areas of expertise: Test Planning, Instrumentation, Ground Operations and Flight Operations. This position is responsible for maintenance support of all flight operations

We are looking for an ECS Engineer with a focus on Flammability

Responsibilities:

Coordinate system test and certification requirements.
Author flight test and ground test specifications.
Support flight test and ground test activities.
Analyze test data and evaluate system operation.
Verifying Comportment ventilation and drain from the view point of fire marshal
Engine and APU Compartment Ventilation/Fire extinguisher from the viewpoint of fire marshal
Prepare test reports.
Domestic and occasional international travel is required.
Requirements:

Flammable Fluid Test, Report, Document, Design for company and certification
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
If the referenced position is not the best fit for your skills, please know that Velocity has multiple openings within a West Coast Flight Test program. Positions include Powerplant, Telemetry and Data Operations, Flight Sciences, Flight Test Instrumentation and Technicians, Electrical, Avionics, Cabin Safety and Controls Engineers. Please feel free to forward this email to others who might be interested.

Candidates must have legal authorization to work in the United States, Canada or Mexico
 
Job Location: Seattle, WA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 10/06/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

EHI Engineers

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, system, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRICAL ENGINEER - SYSTEM INTEGRATION ENGINEER -

Description:
Job Summary: Prepare avionics and electrical systems certification reports, ground test plans and certification plans for the T-6C aircraft. Generate statements of compliance for avionics and electrical systems supporting aircraft Type Certification to the requirements of 14 CFR Part 23 and EASA CS-23.

Responsibilities:
*Responsible for certification support of avionics and electrical systems on T-6C aircraft.
*Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground test plans/results and certification reports showing avionics /electrical systems compliance to the requirements of 14 CFR Part 23 and EASA CS-23.
*Evaluate and analyze avionics systems design for completion of function hazard assessments and system safety assessments.
*Participate in equipment, system, and aircraft ground testing
*Support investigation, root cause analysis, corrective action, and ODA/FAA coordination of aircraft field issues and component failures when warranted for certification concerns.

Requirements:
*5 to 10 years prior certification experience preparing compliance statements for avionics and electrical systems showing compliance with Federal Aviation Administration regulations 14 CFR Part 23 is required.
*Experience with the application of RTCA DO-160, DO178 and DO-254 relative to showing compliance for avionics/electrical systems installation on aircraft to the requirements of 14 CFR part 23 is required.
*Experience with use of electronic test equipment to verify proper operation/troubleshooting of avionics electrical systems is required.
*Strong computer, written and verbal communication skills are required.
*Experience with Microsoft Office Word, Excel, PowerPoint are required, Access and Project experience is desired.
*Time management skills are required to work multiple concurrent projects of various size and scope.

Desired:
*B.S. or advanced degree from an ABET accredited institution in Computer, Electrical Engineering or Engineering Technology is preferred.
*Prior certification experience preparing compliance statements for avionics and electrical systems showing compliance with EASA CS-23 is desired.
*Previous Avionics Electrical Systems FAA Designated Engineering Representative (DER) and/or, ODA Unit Member experience is desired.
*10 to 15 years of avionics/electrical systems integration experience on Part 23 aircraft is desired.
*Experience with the System Safety certification process per SAE ARP4754A and ARP4761 is preferred.
*Must be able to coordinate, communicate and develop good working relations with ODA Unit Members
*Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is desired.
 
Job Number: 126668
Job Location: Wichita, KS
Input Date: 10/04/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

EWIS Expert

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for EWIS Expert for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

As a global engineering expert in aircraft Electrical Wiring Interconnection Systems, you will coordinate with contracted suppliers, interface with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft System development and Certification;
 
Scope of Work:
         Work as Global engineering expert as part of the EWIS team
         Basic work scope is to participate in the development and finalization of the aircraft T/C design, compliant to all applicable requirements.
         This activity includes:



  • Evaluating the current aircraft design, with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA,
  • Coordinate activities related to defining the ESSDs required to generate wiring diagrams
  • Support verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.
  • Coordinating integration of design change activities originated from EWIS requirements when required, run unit base and manage aircraft level changes for EWIS group
  • Responsible for tasks required to perform above activities are considered within work scope; initiating/ reviewing related documents, technical calculation, interface discussions with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
  • Coaching and Education of company members about professional knowledge in the EWIS domain.
  • Interface with other suppliers as appropriate.
  • Provide technical expertise and assist in resolving the EWIS issues during any rig testing or flight testing.
     


 



 
Job Number: 1710075244
Job Location: Nagoya,
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023L1VAAU&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electerical Engineer

Description:
Basic Qualifications:

Bachelor's of Electrical Engineering with 2 years of engineering experience, Master's of Electrical Engineering with no prior experience, or similar degree background.
Previous Shipbuilding experience is highly desired.
Proficient in Microsoft Office applications and Auto CAD 2014
Preferred to have some experience determining the size of electrical cables, panels, circuit breakers, transformers, switches, rectifiers, frequency changers, switchboards and other components comprising a Power distribution system. Familiar with electricial lighting distribution systems. control systems, and C4ISR systems is a plus.
 
Job Number: 15
Job Location: Pascagoula, MS
Rate: hourly
Per Diem: possible
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 10/09/2017
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Dalia
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 251/287-2949
Website: www.nationwideskilledtrades.com

Electric System Component Outfitting Interface Engineer

Description:
This position is located in Nagoya, Japan.

Electric system component outfitting interface engineer
  • Mechanical/ structural interface engineering expertise
  • Willing to be a leading engineer rather than just a manager or an advisor

  • 10+ years experience 
  • Bachelors Degree in Engineering
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610044922
Job Location: Nagoya,
Duration: 36 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Ryan Bushey
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000037FjAAI&URLSource=cjhunter

Electrical (EWIS) Design Engineer - Catia V5

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
Catia V5 Required

Unique Skills:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 372888
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/20/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical (EWIS) Engineer - Technical Specialist II

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Unique Skills:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 372887
Job Location: Savannah, GA
Rate: TBD
Duration: 12 - months
Start Date: ASAP
Input Date: 01/20/2018
Firm Name: CTS INTERNATIONAL
Address: 11100 NE 8TH ST STE 800
City, State: BELLEVUE, WA 98004
Phone: 425/646-2688
Fax Phone: 425/635-7630
Email: cjhunter@ctsinternational.com
Website: www.ctsinternational.com

Electrical (EWIS) Engineer -TS II

Description:
PDS Tech is seeking a Electrical (EWIS) Engineer -TS II  for an open position in Savannah, GA.

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative 

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Education and Experience Requirements: Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred. 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.

Unique Skills: Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


 
Job Number: 1710074338
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jyotsna Sivan
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i500000023IdZAAU&URLSource=cjhunter

Electrical (EWIS) Engineer W/Catia V5-TS II

Description:
Electrical (EWIS) Engineer w/Catia V5-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7977
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical (EWIS) Engineer-TS II

Description:
Electrical (EWIS) Engineer-TS II
Savannah, GA
Rate: $70-$77

Unique Skills:

Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7976
Job Location: Savannah, GA
Rate: $70-$77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Applications Engineer

Description:
Develop Electrical Wiring Interconnect System (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components, such as: connectors, backshells and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Experience/Education Required
BSME/BSEE or equivalent experience.

Unique Skills
Experience with AutoCAD is required.
 
Job Number: 24-161
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: YES
Overtime: YES
Duration: 1 YR +
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Applications Engineer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Electrical Applications Engineering Consultant

Description:
PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
In your role, you will:

 

Unique Skills:



  • Experience with Mentor Graphics L-Cable required. Aerospace experience required.
  • Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881.
  • Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts.
  • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



Principal Duties and Responsibilities: Essential Functions:

  • Contributes to planning, developing and coordinating of important engineering projects
  • Provides specialized technical assistance to team members
  • Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
  • Determines and develops own approach to solutions within schedule and cost objectives
  • Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
  • Acts as liaison with representatives outside of the assigned group/area


Additional Functions:

  • Actively works to improve daily processes and ensures all work meets customer requirements
  • Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
  • Performs other duties as assigned Other

As our ideal candidate, you will meet the following requirements:
  • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

Education/Experience:

  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

 
Job Number: 1610052916
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001tKymAAE&URLSource=cjhunter

Electrical Applications Engineering Contractor

Description:
PDS Tech is seeking an Electrical Applications Engineer for an open position in Savannah, GA.
In your role, you will:

 

Unique Skills:



Experience with Autocad required.

Aerospace experience required.

Experience or knowledge of electrical connectors, backshells, shielding, wiring and electrical connectivity is required. Be Familiar with CFR 14 Part 25 and AS50881. Candidate must be able to create wiring diagrams and schematics to include the selection of qualified electrical components such as connectors, backshells and other electrical parts. Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required.



Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned


As our ideal candidate, you will meet the following requirements:
  • Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. 

Education/Experience:

  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
  • 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

PDS Tech, Inc. is an Equal Opportunity Employer and will not discriminate against applicants on the basis of race, color, religion, sexual orientation, gender identity, national origin, veteran status, or disability.
 
Job Number: 1710063879
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GKHeAAO&URLSource=cjhunter

Electrical Applications Engineers

Description:
Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements. Select qualified electrical components such as connectors, backshells, and other parts. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. Mentor L-Cable
 
Job Location: Savannah, GA
Input Date: 07/07/2014
Firm Name: INCONEN CORPORATION
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Email: cathy@inconen.com
Website: www.inconen.com

Electrical CAD Designer/Drafter

Description:
Overview:
  • Develop system designs and create construction documents for electrical projects using AutoCAD/AutoCAD Electrical.
  • MicroStation would be a plus
  • Work may include single line diagrams, schematics, interconnect diagrams, panel layouts, bill of materials, conduit and cable tray layouts/schedules/fill calculations, and cable and wire interconnection reports.
  • Create drawings for electrical enclosures, equipment, instruments, and installations details.    
  • Complete electrical drawings package under direction from electrical engineering group.

  • Must have strong knowledge and skill with AutoCAD Electrical software.
  • Minimum 3 years AutoCAD drafting experience.
  • MicroStation would be a plus
  • Clear understanding of electrical engineering terminology, codes, and drafting techniques.
  • Familiar with construction processes.
  • Associates Degree in engineering drafting/design or related field.
  • Ability to analyze problems and develop solutions.
  • Ability to clearly communicate technical/non-technical aspects of engineering and construction projects.

 
Job Number: 1710064163
Job Location: Green Bay, WI
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Sue Van Pay
Address: 110 PACKERLAND DR STE A
City, State: GREEN BAY, WI 54303
Phone: 920/499-9943
800 Phone: 800/333-1389
Fax Phone: 920/499-9067
Email: cecjgreenbay@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GLU5AAO&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Certification Engineers - Wichita, KS

Description:
STS AeroStaff Services now offers Electrical Certification Engineer jobs in Wichita, Kansas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Responsible for design, development and certification support of avionics/electrical systems on Beechcraft T-6C aircraft
• Prepare certification plans, conformity requests, equipment qualification test plans/results, system safety documents, ground and flight test plans/results and certification reports showing avionics systems compliance with 14 CFR Part 23
• Prepare engineering drawings for avionics/electrical systems using Mentor Graphics computer based drafting tool
• Assist in development of functional test documents for avionics/electrical systems
• Conduct equipment, system, and aircraft ground testing at Supplier or other testing facilities
• Coordinate with other Engineering disciplines such as Air Worthiness, Project, Flight Test, Aerodynamics, Propulsion, Mechanical Systems, ECS and System Safety

Qualifications:

• Candidate should be a graduate of an ABET accredited Engineering School culminating in a BS or MS degree in Electrical Engineering/Computer Engineering or Electrical/Electronic Engineering Technology
• Proficient in basic computer skills and in Microsoft Excel, Word and PowerPoint
• Strong written and verbal communication skills and competency in one of the subject areas listed above
• Knowledge of 14 CFR part 23, RTCA DO-160, DO-178 and DO-254 is required

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38215
Job Location: Wichita, KS
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 09/28/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Washington)

Description:
Electrical Engineer

Location: Everett, Washington
Duration: 6 months
Rate: up to $55/hr


Primary Responsibilities
Summary
This position is responsible for leading assigned designs in the engineering department utilizing established modeling and design standards.  The Design Engineer will support design and development of engineering packages based on customer and OEM requirements for production, retrofit applications and product development.
 
Tasks Performed
 
Essential Duties and Responsibilities include the following with other duties as assigned:
Assigned design tasks include but not limited to: basic aircraft electrical design, wiring  installations, wiring diagrams, cable assemblies/harnesses, detailed assemblies and  internal specifications.
Works under the direction of an engineering manager, maintains or modifies basic electronic/electrical system/subsystems based on defined requirements using approved processes and tools.
Participates in teams to support the development of designs. Supports the documentation of design implementation.
Obtain, interpret, and analyze OEM airplane install drawings using approved processes and tools.
Obtain, interpret, and analyze OEM airplane electrical design data.
Provides technical, design and informational support for airplane modifications (including full-time on-site modification support and on-call home-team support), manufacturing support and/or in-service issues.
Troubleshoots basic electronic/electrical system/subsystems problems.
Actively support engineering department goals and initiatives.
Coordinate with other departments as necessary.
Utilize internal drawing/document standards per customer or regulatory agency requirements.
Some domestic or international travel may be required.
Perform engineering design check and sign documents.  With periodical technical Provides technical, design and informational support for complex production, product support or in-service issues. Effectively troubleshoots difficult, intermittent, chronic or complex system problems.
Perform analysis of engineering designs including but not limited to Electrical Load Analysis (ELA), System Safety Assessment (SSA), Transverse Separation Analysis (TVSA), etc.
Define and oversee Design Validation testing including but not limited to Engineering Functional Testing, EMI Ground/Flight Testing, etc.
Define engineering task scope (such as work scope validation) for design tasks.
Perform engineering design/analysis with minimum technical guidance.
Provide junior level mentoring and performance management input to PE/Functional Manager.
Perform engineering design approvals (design/approval authority) and task scheduling (such as detailed schedule of a given task per program requirements).
Perform engineering design analysis and validation (such as engineering development testing, airplane and component functional test procedure, HALT, HASS, component qualification testing per RTCA/DO-160, etc).
Perform engineering project scope review, project time estimates and project RFQ commitment, along with resources planning and assignments.
Act as design authority for design tasks.
Define engineer tasks for PE/functional manager.
Desired Education
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
Desired Degree
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field preferred
Desired Job Experience

Education and/or Experience
BS degree Electrical Engineering, Aerospace Engineering or related Engineering field and 8 years or more of experience or equivalent working experience (18 years minimum in an aerospace related field).  Education level required, and amount of relevant experience required here.

Notes:
Should have Aircraft Modification or Retrofit Experience, Electrical background.
experience in any of the following
Aircraft Installations
Boeing Aircraft preferably 777
AutoCAD
Electrical Systems design
Wiring Diagrams
Harness design
Cabin Databases and Lighting Databases is a plus

The Structures Company, LLC is an AA/EOE
 
Job Location: Everett, WA
Rate: up to 55/hr
Per Diem: yes
Overtime: possible
Duration: 6 mos +
Start Date: asap
Input Date: 12/13/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Mark Sharp
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Electrical Design Engineer


East Aurora, NY


12 month contract




GENERAL FUNCTION:

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

DIMENSIONS:

Expected annual production sales from projects: $4M to $10M

NATURE AND SCOPE:

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.




•To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical,



•Aeronautical or Electrical Engineering plus three years of design/development engineering experience.
•As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience.

To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.


Basic knowledge of closed loop control systems and good communication skills is also necessary.

ACCOUNTABILITIES:

1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

4. Operate as a key element in a team of creative, independent individuals.

5. Represent Client in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.




Please email your recent resume to tmcilrath@butler.com
 
Job Number: 52415
Job Location: East Aurora, NY
Per Diem: per diem split possible
Duration: 12 months
Input Date: 09/29/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Taylor McIlrath
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer / circuit design / electrical components NY

Description:
Request number: 4959
Job title: Electrical Design Engineer

Number of openings: 2
Job type: Engineering/IT/Professional
Position location: East Aurora - NY
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA

Driving on company time?: No
Minimum Years of Experience:
Maximum Hourly Pay Rate: 56
Start Date: 10/09/2017
Tentative End Date: 10/26/2018

Job Description

GENERAL FUNCTION:

This position is responsible for development of complex electrohydraulic, electromechanical, mechanical, hydromechanical and electropneumatic components and systems that will become the new products of Moog, Inc. The incumbent, a fully trained professional, plans and conducts efforts requiring judgment in the independent evaluation, selection, and substantial adaptation and modification of standard engineering techniques, procedures, and criteria. Typically, the Design Engineer devises new approaches for the problems encountered.

DIMENSIONS:

Expected annual production sales from projects: $4M to $10M

NATURE AND SCOPE:

A variety of technical functions exist within the Design/Development Engineering Department. Reporting to the division's Chief Engineer typically are Associate Engineers, Development Engineers, Design and Project Engineers, Senior Design and Senior Project Engineers, Senior Staff Engineers, and Principal Engineers, as well as Engineering Managers, Section Heads or Group Leaders. The Design Engineer typically reports to an Engineering Manager, Section Head or Group Leader within the department and on demanding projects he/she might work under the leadership of a Senior Design Engineer. The incumbent receives instructions on specific assignment objectives, complex features, and possible solutions. He/She is expected to make independent and unreviewed decisions on routine technical matters. However, assistance is furnished on unusual problems and work is periodically reviewed for application of sound professional judgment.

The Design Engineer is a key contributor to the analysis, conceptual design, development, and testing of complex control hardware used on military, commercial and NASA vehicles and equipment. The products of Moog generally are unique for each customer. Therefore, most new applications require a special, tailored design, even though adaptation of existing designs always should be considered where appropriate. The Design Engineer generally will operate as part of a design/development team, which includes other Department engineers with his/her primary concern being component design. The incumbent must effectively coordinate the work of drafters, technicians, and others who assist in specific assignments.

In the early stages of a new program, the project team will consult with the customer, establish the problem statement, conceive of potential hardware solutions to the problem, often through extensive trade studies, and then create a successful technical proposal. This phase is critical in that it establishes the basis for future design, and for contract negotiations. Under the technical direction of the Engineering Manager, Section Head or the team's lead engineer, the Design Engineer will then guide the evolution of the conceptual design, technical project planning, detail design, and development testing. This requires some travel and the participation in presentations to customers.

The Design Engineer will apply creative skills to generate designs that fulfill the conflicting requirements of meeting performance goals, robustness over extreme conditions, minimum weight, awkward envelopes, and cost effectiveness. Successful mechanical designs require judicious material selection, effective use of stress analysis, and sometimes design of unique kinematic mechanisms. Successful electrical designs require intelligent component selection and effective use of thermal stress analysis. Circuit designs must be reliable and make optimal use of available space.

To be considered for the position of Design Engineer, a candidate should have a minimum of an MS Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience. As an alternative, the candidate would have a BS Degree plus six years minimum of design/development engineering experience. To fulfill the demands of design and development of new products the individual must have self starting instincts and strong analytical skills. A Mechanical Design Engineer should have a good sense of three dimensional spatial orientation and seasoned knowledge of mechanical hardware design. An Electrical Design Engineer should have solid knowledge of circuit design and a wide range of electrical components.

Basic knowledge of closed loop control systems and good communication skills is also necessary.

ACCOUNTABILITIES:

1. Contribute to the development of new product requirements through consulting with customers and sales personnel.

2. Validate conceptual problem solutions by performing trade studies and analyses.

3. Be a key contributor to the preparation of successful proposal designs, cost estimates, and technical volume write ups.

4. Operate as a key element in a team of creative, independent individuals.

5. Represent Moog in a manner consistent with its technical reputation.

6. Create reliable designs through a comprehensive experimental development test program.

7. Document designs, analyses, and test results with accurate and concise reports.


Other Requirements
Electrical design and analysis of a complex, multi-unit controller. Product is subject to radiation requirements and detailed reliability analyses including bent pin analysis, sneak circuit analysis, etc. Support of the electrical design, analysis, documentation, and manufacture as well as component selection, qualification, and documentation requirements.
 
Job Number: JE-4959
Job Location: East Aurora, NY
Rate: 56/hr max
Duration: 12 month contract
Input Date: 10/30/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Aircraft Interior Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in writing engineering corrective action dispositions by performing associated research; creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-777-110701
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 10/19/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Aircraft Interior Engineer

Description:
• Experience in engineering liaison and design of electrical systems that are part of and support aircraft interiors.
• This includes:
o Entertainment, power, lighting, cabin management and communication systems.
• Experience in writing engineering corrective action dispositions by performing associated research
• Creating modification wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
• AutoCAD, CATIA V5 and SmarTeam experience preferred
• Take ownership of deliverables produced & their quality.
• Coordination with the other Engineering disciplines, client and vendors.
• Experience with leadership/program management on a design program.
• Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.
 
Job Number: 24-195
Job Location: Savannah, GA
Rate: $65 to $70/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Design and Cabin Management Eng Contractor TS II

Description:
UNIQUE SKILLS
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop) AutoCAD, CATIA V5 and SmarTeam experience preferred Take ownership of deliverables produced & their quality. Coordination with the other Engineering disciplines, client and vendors. Experience with leadership/program management on a design program. Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job.


POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-776-111061
Job Location: Southeast
Rate: $65.00 to $70.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design and Cabin Management Engineer

Description:
Experience in engineering design of electrical systems that are part of and support aircraft interiors. This includes:
• Entertainment, power, lighting, cabin management and communication systems. Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
• AutoCAD, CATIA V5 and SmarTeam experience preferred
• Take ownership of deliverables produced & their quality.
• Coordination with the other Engineering disciplines, client and vendors.
• Experience with leadership/program management on a design program.
• Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements :
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-194
Job Location: Savannah, GA
Rate: $65 to $70/hr
Per Diem: YES
Overtime: YES
Duration: 1 Year plus
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Design and Cabin Management Engineer

Description:
Electrical Design and Cabin Management Engineer

Location: Savannah, GA
Pay Rate: $65/hr - $70/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-Experience in engineering design of electrical systems that are part of and support aircraft interiors.
-This includes entertainment, power, lighting, cabin management and communication systems.
-Experience in creating wiring diagrams, schematics, wire harness drawings, electrical installation drawings and completing supporting analysis/calculations (e.g. voltage drop)
-AutoCAD, CATIA V5 and SmarTeam experience preferred.
-Take ownership of deliverables produced & their quality.
-Coordination with the other Engineering disciplines, client and vendors.
-Experience with leadership/program management on a design program.
-Take lead role in the process of preparation of design deliverables to ensure appropriate checking & review of all documents / drawings before release.

Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Company products and services

Principle Duties and Responsibilities/Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 7764
Job Location: Savannah, GA
Rate: 65-70
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical EWIS Eng w/Catia V5 - TS II

Description:
UNIQUE SKILLS
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

POSITION PURPOSE
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of client products and services

PRINCIPLE DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

ADDITIONAL FUNCTIONS
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

OTHER REQUIREMENTS
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 17-795-116742
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 01/08/2018
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Email: abui@agentetech.com
Website: www.agentetech.com

Electrical EWIS Engineer/ Electrical Apps

Description:
Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• Develop electrical wiring interconnect systems (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wiring diagrams, cable/wire harness assemblies, and rack/panel designs from electrical system schematics adhering to EWIS requirements.
• Select qualified electrical components such as connectors, backshells, and other parts.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Mentor Graphics Capital Harness Systems (CHS) is strongly desired

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.



Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-204
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

Electrical EWIS Engineer/EHI

Description:
Position Purpose:

Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services


Unique Skills:


• Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Education and Experience Requirements:

• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:

• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
 
Job Number: 24-205
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 01/19/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
*Applies knowledge of current state of the art technologies, tools and practices to product development and sustaining engineering projects
*Effectively contributes to process from initial concept and specifications through design, test, and successful production launch
*Particular emphasis on design and development of printed circuit boards and cabling
*Ensures products comply with all relevant regulatory safety standards and user requirements

Requirements:
*B.S. degree in Electrical Engineering;
*A minimum of 2 years of related experience
*Proficiency w/ PCB design tools ideally Altium Designer
*Proficiency with Microsoft programs
*Excellent written and oral communication skills
*Excellent teamwork ethic
*Strong problem solving and creative skills
*Must be a team player with good people and leadership skills
*Good organizational skills
*Able to multitask development projects.
 
Job Number: 126781
Job Location: Wilmington, MA
Input Date: 10/24/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating wiring harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents.

Mandatory Skills:
Experience creating electrical architectures/schematics and wiring harness design. Experience using wiring harness design tools such as Mentor Graphics Capital Harness or HarnesSyS.

Desired Skills:
Experience performing electrical load analysis and electrical power system integration

Experience with CATIA V5 Experience generating System Checkout Procedures and providing support. Experience incorporating subsystem hardware into a Software Integration Lab (SIL) and troubleshooting integration issues.
 
Job Number: 1006173
Job Location: Palmdale, CA
Input Date: 10/24/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
•Security Clearance desirable but not required.
•Experience: 8+ years of domain experience
•Design, development, modification and analysis of various electronic systems.
•Troubleshoot and diagnose malfunctions in new/existing products or systems and makes modifications as needed.
•Compile and evaluate design and test data.
•Analyze, develops and recommends design approaches.
•Must be familiar with VHDL, Verilog, FPGAs, CPLDs, Schematic Capture/Simulation (preferably Mentor tools). 8-10 years Hardware design experience
 
Job Number: 40855
Job Location: OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 mos +
Start Date: ASAP
Input Date: 10/10/2017
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer

Location: Oshkosh, WI
Duration: 10+ months

Description:
BSEE degree required, not EET
Circuit/harness design, EMC (electro mechanical compatibility), trouble shoot vehicle electrical systems
Background as mechanic in military or auto repair helpful for troubleshooting

Perform engineering work of various types in the electrical design or re-design, and development of electrical systems into existing and new, medium and heavy-duty vehicles.
Exercise independent judgment and action.
Will require working closely with suppliers, engineering specialists, and other departments.
This person will provide resource estimates for project planning as well.
 
Job Location: Oshkosh, WI
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 10 months
Start Date: Asap
Input Date: 10/19/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The candidate will work within an Integrated Product Development Team to support the design and development of various electronic controls; will work with the Project Engineer to execute project to meet schedule and budget milestones; and will collaborate with a wide variety of functional areas inside and outside the organization to ensure successful completion of program requirements. Candidate will have BS in Electrical Engineering with 4 years of working experience in the aerospace industry. Responsibilities • Coordinate Integrated Product Development Team activities (design, procurement, fabrication and test) • Assist Control Account Managers with Earned Value Management (EVMS) by monitoring program cost and schedule performance • Assist Control Account Manager with Estimate to Complete • Coordinate activities associated with review and approval of engineering specifications and engineering drawings • Initiate and process Engineering Changes working with all engineering disciplines to implement approved changes. This will include marking drawings, copying prints, creating PDF’s to support electronic Engineering Change process. • Coordinate, track and support the assembly and test of development hardware • Support supplier selection and part procurement • Provide status reports • Support program reviews both internal and external • Coordinate closure of action items • Support operations to fabricate, assemble, test and qualify flight hardware • Ensure standard work flow maps are complete • Document activities and programs worked with time spend on various activities. This information will be submitted weekly and summed monthly by person with the monthly invoice. Skills/Experience • Ability to perform as part of a cross-functional team and coordinate the activities of various engineering disciplines including electrical and mechanical design, systems, components, materials development, process development, and supplier development • Strong project management, organizational and prioritization skills • Ability to work independently or as part of an integrated product team • Able to understand electrical circuitry and able to recommend trouble shooting test steps to the stakeholders • Ability to read and understand technical manuals, blueprints or drawings • Prepare test plans, analyze test data, and prepare reports to support project activity, and maintain up-to-date records of project test results • Understanding Earned Value Management Basics • Strong troubleshooting and problem solving skills • Must understand fundamentals of Root Cause Analysis • Interface with shop floor personnel for the purpose of communicating technical, quality, and inspection information • Strong written and verbal skills including thorough knowledge of Microsoft Office products
 
Job Number: 39085
Job Location: Windsor Locks, CT
Duration: 12 months
Start Date: ASAP
Input Date: 09/28/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1700 WELLS RD STE 1
City, State: ORANGE PARK, FL 32073-2373
Phone: 904/562-3215
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Ideal Candidates will have electrical engineering experience with Aircraft Cabin Interiors and Systems to include but not limited to: -Cabin Management System -Cabin Entertainment System -Cabin Lighting -Cabin Switch Controls -Telephone System -Satellite communications -Water System -Waste System -EWIS -Cabin interior monuments -Seats

Education/Experience
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.
 
Job Number: 24-175
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Engineer

Description:
PDS is seeking a Electrical Engineer TS I  for an open position in Savannah, GA.
In your role, you will:


Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Principal Duties and Responsibilities:

Essential Functions:

1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
2. Performs other duties as assigned

Education and Experience Requirements:



Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD. 

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline

Unique Skills: Candidate shall have experience in one or more of the following: Electronic hardware design, Data acquisition system design, Industrial process measurement

POC: Clyde (813) 426-9917 or ccallwood@pdstech.com 
 
Job Number: 1710071488
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i5000000238B7AAI&URLSource=cjhunter

Electrical Engineer

Description:
Many more engineering, IT, and manufacturing openings throughout the U.S. Check our website www.chiptonross.com for a complete list of current openings

Benefits:
Holiday Pay, Weekly Pay, Vacation Pay, Referral Bonus, Group Health Insurance, Delta Dental, 401(k), Direct Deposit
 
Job Number: 164437
Job Location: New Jersey
Input Date: 07/31/2017
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
800 Phone: 800/927-9318
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Electrical Engineer reports to the Engineering Manager. The Electrical Engineer plans, designs, and oversees the installation, operation and maintenance of electrical/electronic components, equipment, and systems. Furthermore, acts as a focal point/ individual contributor with respect to electrical and electromagnetic compatibility compliance to industry/regulatory requirements and standards for airborne applications such as RTCA DO-160 or MIL-STD-461E.
Electrical Engineer performs conventional, moderately complex engineering assignments that may involve component, equipment or product design, simulation, testing, and preparation of specifications, process studies, and/or research investigations. Instructions are provided on task specifications and design constraints. Close guidance on new design or applications is provided.


JOB RESPONSIBILITIES

• Applies standard engineering techniques involving only minor innovations of methodology to provide solutions to problems involving a limited number of variables.
• Performs low to medium complex circuit/wiring design activities and, subsequently, prepares appropriate validation and verification means.
• Supports product certification/qualification with subject matter knowledge and exercise professional judgment whilst supporting other business functions.
• Typically focuses on existing products or processes.
• Liaises with drafters, technicians, and others to contribute to project completion.
• Coordinates work with other engineers and operating groups to facilitate participation of various organizational units.
• Performs other related duties as required.



MINIMUM REQUIREMENTS:
• Bachelor's degree in Electrical Engineering from an accredited four-year college or university; and three-to-five years related professional experience and/or training; alternatively, an equivalent combination of education and experience.
• Aerospace industry experience is strongly preferred.
• Must be proficient with basic physical laws/techniques as applied in electrical engineering (e.g. Ohm’s Law, Kirchhoff’s Laws), electromagnetic characteristics of materials, electrical circuit theory, two-pole and four-pole theory, Maxwell equations, and basic linear/digital/power electronics.
 
Job Location: Everett, WA
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 12/01/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Electrical Engineer

Description:
Hiring in multiple locations

Email your resume or apply online

Benefits Available
- long term contracts
- top per diem rates
- direct deposit
- referral bonuses
- 401(k) program
 
Input Date: 05/09/2017
Firm Name: NESC STAFFING
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
800 Phone: 800/562-3463
Email: lokeefe@nesc.com
Website: www.nesc.com

Electrical Engineer

Description:
Electrical Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
-This position will review designs for Electrical Systems aspects.
-Activities include interacting and coordinating with DERs/ARs during a certification project, coordinating, tracking and completing certification tasks, writing certification plans, test plans, test reports and preparing related paperwork and forms.
-The ideal candidate will have:
-At least one (1) year experience with certification activities associated with STC projects
-Experience with aircraft interior outfitting preferred.
-Current Electrical Systems DER/AR designation preferred
-EWIS experience desirable

Education and Experience Requirements:
-Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

-Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area.

Other Requirements:
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7129
Job Location: Savannah, GA
Rate: 58.00-63.00
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

Electrical Engineer - ASICs / FPGAs

Description:
PDS Tech, Inc. is seeking Senior level Electrical or Computer Engineers for our Client, a premier supplier of avionics, electronics, and communications systems.
 
You will be involved in the testbench design, implementation, and verification of a wide variety of high-performance digital ASICs and FPGAs applied to signal processing, image processing, and information assurance applications.
 
 In this role you will:
  • Provide verification environment architecture and design using SystemVerilog with OVM/UVM
  • Create written test cases, code coverage tracking, and functional coverage tracking
  • Provide testbench development for the verification of RTL blocks using VHDL or SystemVerilog
  • Recommend new tools and practices for continuous improvement in the group's ASIC / FPGA verification flow

  • Experience with testbench development for the verification of RTL blocks using VHDL and/or SystemVerilog
  • Familiarity with best practice chip-level verification techniques and languages (e.g. constrained random, functional coverage, SystemVerilog)
  • Familiarity with revision control concepts and tools (e.g. Clearcase, Subversion)
  • Ability to work with minimal supervision, as a part of a team of engineers with a variety of skills and backgrounds, matrixed into projects with aggressive schedules and frequent milestones
  • Strong oral and written communication skills and the ability to document and present one's work and status
  • Ability to obtain a Security Clearance. US Citizenship is required.
  • Bachelor's Degree in either Electrical Engineering or Computer Engineering field

 
Desired skills:

  • ASIC / FPGA lab validation with advanced lab equipment
  • Design for Test (DFT) and manufacturability issues
  • Experience with Unix, scripting, C/C++, Python, and/or Perl
  • Digital circuit architecture, design, resource tradeoffs, timing analysis and timing closure
  • Proficiency using ASIC and/or FPGA simulation and synthesis tools (e.g. Questasim, Synplify, FPGA-specific tools)

 
Job Number: 1610053774
Job Location: Cedar Rapids, IA
Per Diem: No
Duration: 12 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jason Andrzejewski
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002CB3OAAW&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Launch Vehicles (Active Secret Clearance REQUIRED)

Description:
Job Title: Electrical Engineer - Launch Vehicles
Location: Chandler AZ
Clearance: YES
Job Type: Contract
Duration: 1 Year, could be extended and/or go direct with the client
Schedule: 9/80

Description:
• Work with a team of engineers to support the Design, Integration and Testing of launch vehicles for the GMD program.
• Support may include designing electrical cable assemblies, processing engineering design changes, performing tests on launch vehicles, processing test data and troubleshooting test anomalies.
• Also responsible for implementing internal and customer requirements on electrical systems.
• Support factory and launch site integration, test and launch activities. Other duties as required.

Qualifications:
• Requires a security clearance and travel of up to 15% of the time are also required.
• BSEE from an accredited university is required.
• Preferred 2 to 5 years of electrical engineering experience, with 1 year minimum requirement.
 
Job Number: O7528577
Job Location: Chandler, AZ
Rate: Open
Per Diem: Split
Overtime: Some
Duration: 12 months
Start Date: ASAP
Input Date: 11/29/2017
Firm Name: NESC STAFFING
Attention: Brad McInnis
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

Electrical Engineer - Level 2

Description:
Electrical Engineer - Level 2 (Integrated Circuit Layout Engineer)

Location: Santa Barbara, CA
Pay Rate: DOE ($50/hr - $70/hr)
Duration: 1 year W2 contract
Shift: First, 4x10, no OT
**MUST be a U.S. CITIZEN**
**MUST be ELIGIBLE to obtain a SECRET CLEARANCE**

Description
INTEGRATED CIRCUIT LAYOUT ENGINEER - Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.

Skill/Experience/Education (Mandatory):
-Performs transistor level silicon layout of CMOS integrated circuits for read-out integrated circuit infrared applications.
-IC Layout Engineering: CMOS VLSI transistor level layout (4-5 years' required)
-BS degree or higher.
-Must be U.S. Citizen.
 
Job Number: 7887
Job Location: Santa Barbara, CA
Rate: 50-70
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Electrical Engineer - Product/Process

Description:
PDS Tech, Inc. is seeking a Product/Process Electrical  Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

This Electrical Engineer position will fulfill a technical role in the Secure Electronics organization. Engineers in this organization provide engineering support of highly technical and advanced manufacturing processes typically requiring specialized qualifications, knowledge, and/or skill. This engineer will perform project management, as well as, design, development, evaluation, and quality control functions on complex engineering projects and electrical assembly devices. While in the position, increasing roles of project leadership are expected. This position will exercise considerable latitude in determining technical objectives of assignments.

Summary of Duties:   
 Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams.
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment. Takes actions necessary to "stop" work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an accredited Engineering program.
  • Two (2) or more years of relevant experience in engineering of products or processes or comparable related technical area. 

Additional Qualifications:  
 
  • Existing DOE Q clearance.
  • MS in Electrical Engineering from ABET accredited institution.
  • Five (5) or more years of relevant, progressive experience preferred in engineering of products or processes or comparable technical area.
  • Demonstrated experience in project leadership.
  • Broad knowledge of manufacturing or quality processes and techniques.
  • Ability to apply advanced design, development, evaluation, and quality control techniques to highly complex.
  • Electrical Engineering concepts and projects.
  • Ability to work without supervision, with latitude for independent action and decision making.
  • Ability to provide technical guidance, project management, consultative services, and innovative solutions.
  • RF engineering experience.
  • Strong communication skills, both written and verbal.
  • Demonstrated technical innovation and problem solving.
  • Significant experience in a manufacturing or design environment.

 
Job Number: 1710068677
Job Location: KS City, MO
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0bAAC&URLSource=cjhunter

Electrical Engineer - TX - C

Description:
Chipton Ross is seeking an Electrical Engineer in GRAND PRAIRIE, TX

Start Date: ASAP

Job Description:
Electrical design support will be required to support missile electrical architecture trade studies and concept design. Overall missile electrical design and particular focus for the control actuation system design is required. Candidate may need to work with component suppliers.

The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in EE toolsets; have good communication skills, and be able to work with internal and external customers.

Mandatory Skills:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes. Bachelors degree from an accredited college in a related discipline, or equivalent experience/combined education, with 2 years of professional experience; or no experience required with a related Masters degree. Considered experienced, but still a learner.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

 
Job Number: 161283
Job Location: Grand Prairie, TX
Rate: Up to $45.00 DOE
Duration: 1 Year
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Robert Davis
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: rdavis@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer 2 - O/M - LA

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

Electrical Engineer 2 - WA

Description:
Chipton-Ross is seeking an Electrical Engineer 2 located in Bingen, WA

RESPONSIBILITIES:
Analyzes and interprets electrical system/subsystem requirements and specifications. Develops requirements and specifications for printed circuit board assemblies. Performs risk assessments and makes mitigation recommendations. Decomposes system requirements. Creates electronic hardware module-level architectures. Develops detailed electrical hardware and firmware designs. Identifies electronic hardware interface controls conflicts and makes recommendations. Creates electronic hardware documentation release packages. Develops and performs verification and validation procedures for electronic hardware components. Conducts testing/ analysis of avionics/electrical components, equipment, and systems. Documents technical performance metrics. Diagnoses malfunctions in existing products and makes design improvements and/or modifications.

REQUIRED EXPERIENCE:
"Ability to analyze problems (troubleshooting, fault isolation, repair, modification, or redesign) of assigned end items to support the design, development and modification of company products using knowledge of engineering disciplines (ME, EE, etc.).
"Knowledge of digital circuit design parameters (e.g., throughput, rise time, clock frequencies, propagation delay) and hardware description languages (e.g., Hardware Description Language [HDL], Verilog). Knowledge of computer hardware and software components (e.g., processors, memory, interfaces, high order languages), and characteristics (e.g., throughput, processing architecture, timing, capacity).
"Knowledge of electrical engineering theories (e.g., Kirchhoff's Law, Ohm's Law, lighting, power factor, control theory), formula selection (e.g., room cavity ratios, short-circuit, voltage drop, motor counts, capacitor, harmonic correction, load calculations), and methods (e.g., relay coordination, root cause analysis).
"Knowledge of Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) considerations with respect to electrical/electronic design (e.g., wire harness design, grounding and shielding design techniques, lightning protection).
"Exercises engineering judgment in developing appropriate decisions considering decision criteria, implications, and possible consequences, to ensure product design integrity. Demonstrates understanding of the applicable scientific and engineering knowledge and involves others in obtaining information for the engineering decision-making process.
"Knowledge of various engineering disciplines such as electrical, mechanical, and systems. The ability to communicate with technical personnel from multiple skill areas and functions to evaluate technical information and issues impacting design, production, and support of products, services, or other deliverables.

EDUCATION:
This job is limited to employees who, in the performance of their assigned work, regularly apply engineering disciplines to the research, design, development, test, and evaluation of company products, facilities, or manufacturing process and have a minimum of a Bachelor's degree of Science from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. Typical experience: 2-4 years in an engineering classification with a Bachelor's degree or 0-2 year's experience in an engineering classification with a Master's degree.

WORK HOURS:
Full-Time

 
Job Number: 165599
Job Location: Bingen, WA
Rate: $DOE
Duration: 6 Months
Input Date: 01/20/2018
Firm Name: CHIPTON ROSS
Attention: Brenda Ordaz
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: bordaz@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret CA

Description:
160384
Requirement #AERO-REQ-0656
Work Location Palmdale, CA
Work Week 9/80
Priority High
Needed Date 09/26/2017
End Date 09/21/2018
Number of Resources 1
Security Clearance Secret (Prime Contract:Circle A, Can start w/o clearance:No, Interim Clearance Sufficient:No)

Title: Electrical Engineer

Description
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating wiring harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents.

Skill/Experience/Education
Mandatory:

Experience creating electrical architectures/schematics and wiring harness design. Experience using wiring harness design tools such as Mentor Graphics Capital Harness or HarnesSyS.
Secret Clearance.
Desired:

Experience performing electrical load analysis and electrical power system integration
Experience with CATIA V5 Experience generating System Checkout Procedures and providing support. Experience incorporating subsystem hardware into a Software Integration Lab (SIL) and troubleshooting integration issues.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness.
6-8 Years Yes
Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics.
9-10 Years Yes
Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems.
6-8 Years No

Interview Required Yes
OT Allowed Yes (OT Limitation: No)
Travel No
Non-Exempt
Rate Type Per Hour

Rates
0-4 Yrs Pay Rate: 65.00 USD
5-8 Yrs Pay Rate: 70.00 USD
9+ Yrs Pay Rate: 75.00 USD
 
Job Number: JE-0656
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 11/06/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers 2

Description:
We are accepting applications Electrical Engineers 2

Qualifications: Bachelors of Electrical Engineering with two years of engineering experience, Masters of Electrical Engineering with no prior experience, or similar degree background. Previous shipbuilding experience is highly desired.

Must be able to pass background and drug tests

Job Description: Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems.
Candidates will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents.

Nationwide Skilled Trades
Mobile, AL: 251-287-2949
 
Job Number: 20
Job Location: Pascagoula, MS
Rate: Houry rate
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 10/09/2017
Firm Name: NATIONWIDE SKILLED TRADES
Attention: Dalia
Address: P O BOX 1270
City, State: HOUMA, LA 70361
Phone: 251/287-2949
Website: www.nationwideskilledtrades.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Engineer (Special Missions)

Description:
- Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project
- Produce and maintain wire harness assemblies, utilizing the CATIA V5 Electrical and Sheet Metal Work Benches.
- Capable of interfacing with wiring diagrams, system and EMI/EMC requirements.
- Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.

Unique Skills:
- 5000 hours of CATIA V5, Electrical Work Benches required

Experience/Education:
- BSME/BSEE or equivalent experience
 
Job Number: 24-167
Job Location: Savannah, GA
Rate: $58 to $63 per hour
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 10/30/2017
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Harness Installation Engineer-Special Missions

Description:
Electrical Harness Installation Engineer-Special Missions
Savannah, GA
Rate: $58-$63

Unique Skills:

Candidate shall not be a foreign national and must be legally qualified to work on an ITAR project. Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.

Job description:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Company products and services

Principal Duties and Responsibilities:
Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned
 
Job Number: 7876
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 01/17/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: cathy@inconen.com
Website: www.inconen.com

Electrical Harness Installation Engineering Contractor

Description:
PDS Tech is seeking an Electrical Harness Installation Engineering Contractor  for an open position in Savannah, GA.
In your role, you will:

Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Principal Duties and Responsibilities: Essential Functions:
1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned



Education/Experience:
  • Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.

 

Other Requirements:

1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 



Unique Skills:



Must have In depth knowledge of electrical harness installation and design guidance documentation (AC 43.13B, SAE AS50881, AC1701-1)
In-depth knowledge of FAR 25 sub part H (EWIS) design requirements
Knowledge of EWIS component qualification requirements and documentation (EIA 364, MIL-DTL-38999, MIL-DTL-50151)
Extensive knowledge of EWIS component selection criteria; experience with Mentor Graphics Capital Harness System (CHS) 


POC: Clyde (813) 426-9917 or ccallwood@pdstech.com

 
 
Job Number: 1710069290
Job Location: Savannah, GA
Per Diem: No
Duration: 6 months
Input Date: 01/19/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 3922 COCONUT PALM DR STE 100
City, State: TAMPA, FL 33601
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002K38fAAC&URLSource=cjhunter

Electrical Harness installation Engineer

Description:
PDS is seeking an Equipment and Furnishings Engineer for an open position in Savannah, GA.


Unique Skills:



 Aerospace experience is required. Knowledge of Catia V5 is required. Candidate must be able to design wire harness assemblies and installations utilizing the Catia V5 Electrical and Sheet Metal Work Benches. Must have intimate knowledge of an ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements, while meeting all installation and maintainability requirements. Candidate must possess knowledge of regulatory guidance material relative to aircraft harness design. Excellent verbal and written communication skills, and computer skills (Catia V5, Catia V4, PC/MS Office) are required.



Position Purpose:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of  products and services

Principal Duties and Responsibilities:
Essential Functions
:
1. Contributes to planning, developing and coordinating of important engineering projects
2. Provides specialized technical assistance to team members
3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
4. Determines and develops own approach to solutions within schedule and cost objectives
5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
6. Acts as liaison with representatives outside of the assigned group/area

 Additional Functions:
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned



 

Education and Experience Requirements:
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in the specific technical discipline or 10 yrs broad engineering experience in several technical disciplines with Bachelors, or 3 yrs in the specific technical discipline with Masters, or 1 yr in the specific technical discipline with PhD.



Other Requirements:

1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline


 
Job Number: 1710073229
Job Location: Savannah, GA
Duration: 6 months
Input Date: 01/19/2