Job Search Results

444 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2019/08/23 Friday 03:20PM Pacific Time by ContractJobHunter. )

Listings 1 - 444

Go To My Job Tracker

Expand all descriptions

2 Aircraft Stress Engineers with Composites

Description:
2 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/25/2019
Last Updated: 08/22/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Email: chrissheets@thestructurescompany.com
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2460 - BUSINESS ANALYST - cv. word doc only

Description:
Produce, maintain and respect the project schedules;

Lead, coordinate and govern meeting for any Process & Tool (SAP) implementation, Adjustment or improvement with the respective project stakeholders;

Produce and maintain Project Management indicators;

Understand and document manufacturing function's business requirements and processes;

Identify and propose solutions meeting business requirement;

Participate in multifunction workshop sessions and activities following SAP implementation;

Identify and manage master data modification;

Perform SAP improvement testing with IT;

Ensure efficient communication and change management with impacted functions;

Identify and document training requirement, perform training with users and super users;

Provide support to SAP users;

Ensure user support, troubleshooting and RFCs tracking with IT teams

Have a Bachelor's degree in Industrial Engineering, Operation Management, Computer engineering or any equivalent relevant experience.

Must have a minimum of 5 years of relevant employment experience.

Have organization skills, rigor and autonomy.

Demonstrate strong leadership skills and love challenges.

Have a great sense of initiative.

Have a very good knowledge of MS Office (Excel, MS Project, Power Point, Visio).

Experience in aerospace or cabinet manufacturing industry is an asset.

Strong knowledge of SAP, a major asset.

Bilingual - (French and English) is required.
 
Job Number: 2460
Job Location: Montreal, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 03/14/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineers

Description:
Skill set:
Must have Primary and secondary structural design experience. Light aircraft (FAR 23) is preferred.

Excellent detail design skills, along with a combination of composites and metal part and assembly design background. Must have CATIA V5 and CPD experience (composite part design workbench in CATIA).


Position Responsibilities
Under the direction of project design engineering, serve as a member of a design team providing structural detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Minimum Requirements
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired
· 10 years of experience in Aerospace design is a minimum
· CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft is preferred

The Structures Company is an AA/EOE.
 
Job Number: 242
Job Location: Manassas, VA
Rate: $72-$75/Hr. **DOE**
Per Diem: Yes
Duration: 9 Months
Start Date: ASAP
Input Date: 04/09/2019
Last Updated: 04/10/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2523 - HYDRO-MECHANICAL SYSTEMS ENGINEER - cv, word doc only - On Hold

Description:
Take part in the integration of the flight control, hydraulic and/or landing gear system for the definition, specification, design, analysis, modification, test and certification of hydro-mechanical systems

Coordinate product development activities between the supplier of the system and the affected work packages

Ensure successful design, validation, certification and delivery of the system

Ensure successful completion of each development phase deliverables (may author, review, approve)

Problem solve the technical issues in a cross functional environment

Be involved in the design and integration of the system

Review the design and documentation of all the aspects related to your system

Check for quality of the Supplier's analyses

Validate and verify system requirements as well as system performance through design reviews, analyses, rig and aircraft testing

Define, prepare and execute qualification and certification tests

Work with supplier in the investigation and resolution of test findings

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years

Background in design, integration, development and certification of Hydro-Mechanical Systems

Cognizant of the relevant Airworthiness Regulations and certification process

Good oral and technical writing skills in English (required)

Motivated, self-starter, organized, autonomous and able to work under limited supervision

Team player and able to work with suppliers and customers

Dynamic person with initiative, a strong sense of responsibility and good judgment

Knowledge of MS Office software (essential)

Knowledge of CATIA, Matlab, Simulink (an asset)
 
Job Number: 2523
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 05/09/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2524 - PROPULSION SYSTEMS ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of five (5) to seven (7) years.

Background in design, integration, development and certification of Propulsion Systems.

Cognizant of the relevant Airworthiness Regulations and certification process.

Good oral and technical writing skills in English and French (required).

Motivated, self-starter, organized, autonomous and able to work under limited supervision.

Team player and able to work with suppliers and customers.

Dynamic person with initiative, a strong sense of responsibility and good judgment.

MS Office software (essential).

Good knowledge of DO-160, FAR/CAR25 Regulations.

Previous experience in providing engineering support to a Final Line/Production would be an asset.
 
Job Number: 2524
Job Location: Toronto, Canada
Rate: 57.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/22/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2525 - METHODS ENGINEER - AFTERNOON SHIFT - cv, word doc only

Description:
Support the Client Final Line Assembly activities for a timely resolution of production line issues related to system integration.

Witness system functional testing and conduct technical investigations / troubleshooting on Hydro-Mechanical Systems (ATA 27, ATA 29, ATA 32), analyze and develop solutions / recommendations.

Support production to resolve non-conformance (NCR), tooling issues and procedure clarification / correction.

Track and ensure successful implementation of systems installations and modifications

Support the line by producing return into service (RTS) documentation.

Develop good working relationships with various departments within BA and with all suppliers

Bachelor Degree in Engineering or Master Degree (Aerospace Manufacturing, Aircraft Maintenance etc.).or a diploma from a technical college.

3-8 years%u2019 experience in aircraft Electrical and Avionics systems (Communication, Electrical Power, Indication/Recording Systems, Navigation, and Information Systems)and / or in Hydro-Mechanical Systems (Fly-by-Wire systems, Wing High-Lift, Landing gear, Hydraulic Systems).

Experience in providing support / troubleshooting to Aircraft Maintenance / Final Line / Production Line / Test Bench / Simulator.

Are process oriented.

Possess strong analytical skills, you are a quick learner.

Are a team player, able to work in high-stress environment.

Have excellent interpersonal and communication skills.

Autonomous persons, capable of managing time and prioritites

Must have a good knowledge of MS Office and Requirements Management tools.

Knowledge of SAP is an asset.

Knowledge of MES is an asset.
 
Job Number: 2525
Job Location: Toronto, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 04/04/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2528 - ELECTRICAL SYSTEMS ENGINEER - cv, word doc only

Description:
Integrate electrical systems on Client family of aircraft (including power generation systems, electrical wiring interconnection systems (EWIS), lighting systems, etc.).

Ensure that all new electrical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and to Client Aerospace requirements and practices.

Prepare requirement documents including technical quotations, system schematics, technical requirement documents (TRD) and statement of work (SOW).

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Prepare functional test engineering requirements (FTER), Test definition Sheets (TDS) and electrical systems certification reports.

Coordinate with system suppliers to achieve good integration.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Provide the required electrical expertise and support for the integration of all other aircraft systems (avionics, hydromechanical, pneumatics, propulsion, etc.).

Investigate system problems identified on aircraft in service or in production. Provide engineering dispositions and repair procedures.

Create electrical system schematics and review system

University degree in Engineering or equivalent.

Must be a team player showing initiative, have a strong sense of responsibility and possess good technical and commercial judgment

Must have at least 5 years relevant experience with the specification, design, development, integration, test and certification of Electrical systems on aircraft.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Must be capable of working under pressure, be attentive to details, have good planning skills and be fully committed to accomplishing work on time and on schedule.

Must have abilities in AutoCAD/AutoSketch.

Must be familiar with part FAR25 / 525 certification process.

Must be computer literate and familiar with commonly used software (MS Office).
 
Job Number: 2528
Job Location: Mirabel, QC, Canada
Rate: 58.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2529 - HYDRO-MECHANICAL SYSTEMS ENGINEER

Description:
Integrate hydromechanical systems on CRJ Family of aircraft (including landing gear, flight control, hydraulic systems, etc.).

Provide the required hydromechanical expertise and support for the integration with other disciplines (including design, RM&S, airworthiness, electrical, avionics,
propulsion, etc.).

Coordinate with system suppliers to achieve good integration.

Investigate system problems identified on aircraft in service or in production.

Provide engineering dispositions and repair procedures.
Support Continuous Airworthiness (CAW) processes.

Analyze and approve new system concept proposals and integrate them in aircraft documentation.

Ensure that all new hydromechanical system concepts meet applicable aircraft system requirements (FAR, RTCA DO160, etc.) and Client Aerospace requirements and practices.

Communicate and coordinate with Transport Canada's design approval designees (DADs).

Prepare requirement documents including technical quotations, system schematics, TRDs and statement of work (SOW).

Prepare and/or review system definition drawings, qualification documentations, functional test engineering requirements (FTER), Test definition Sheets (TDS), design compliance reports, reliability reports and other system certification
reports.

Provide technical support to the production line and to in-service aircraft as required.
University degree in Engineering or equivalent experience, in the mechanical field. A specialization in aeronautical applications is desirable.

Technical experience on the Client family of aircraft is an asset.

Must have strong English (written and spoken) communication skills.

Manage various projects under strict budget and schedule requirements.

Are able to manage conflicts and solve problems.

Are self-starter, enthusiastic, well organized and customer oriented.
 
Job Number: 2529
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2536 - DESIGN ENGINEER - cv, word doc only

Description:
Participate in design reviews and exchange / communicate your thoughts.

Provide estimate of design related activities.

Support suppliers, production and final line installations.

Bachelor Degree in Mechanical or Aerospace engineering or equivalent with a minimum of five (5) years of relevant experience.

Possesses or cumulate experience in:
Design of aircraft structures with CATIA V5/FiberSim.
Ability to understand complex engineering issues .
General computer skills.

Must be a self-motivated person, a team player able to work under pressure and under a minimum of supervision.

Have an excellent record of meeting your commitments with success.

Bilingual - possess strong communication skills in both French and English.
 
Job Number: 2536
Job Location: Mirabel, QC, Canada
Rate: 51.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/09/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2544 - PROPULSION SYSTEM / FUEL ENGINEER - cv, word doc only

Description:
Design and integration of the system.

Review of the design and documentation of all the aspects related to your system.

Checking for quality of the Supplier's analyses.

Validation and verification of system requirements.

Validation and verification of system performance through design reviews, analyses, rig and aircraft testing.

Definition, preparation and execution of qualification and certification tests.

Working with supplier in the investigation and resolution of test findings.

Preparation or review of qualification or certification reports.

Working with suppliers to establish complete system requirements and system interfaces.

Liaison with stress, loads, reliability, maintainability and safety (RM&S), simulation, customer and operations support departments.

Provide support to business units in Propulsion Control requirement definition, verification and validation, following ARP4754.

Identify issues and obstacles, follow-up and communicate progress.

Prepare reports or presentations.

Bachelor or Master's (preferred) degree in Mechanical or Aerospace Engineering with a relevant experience of minimum of ten (10) years.

Possess very good knowledge in Propulsion Control Systems and their integration on the aircraft.

Have a background in design, integration, development and certification of Propulsion Systems.

Are cognizant of the relevant Airworthiness Regulations and certification process.

Have good oral and technical writing skills in English and French (required).

Are motivated, self-starter, organized, autonomous and able to work under limited supervision.

Are a team player and able to work with suppliers and customers.

Are a dynamic person with initiative, a strong sense of responsibility and good judgment.

Have knowledge of MS Office software (essential).
 
Job Number: 2544
Job Location: Montreal, Canada
Rate: 56.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 04/25/2019
Last Updated: 05/29/2019
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced Systems Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Advanced Systems Engineer
(US Citizenship Required*)
Pittsfield, MA
2019-7829

Responsibilities:
• Analyze, define, and manage system requirements including customers’ requirements
• Create technical plans
• Analyze function, performance, cost, risk, supportability, and effectiveness for subsystems and system elements
• Design, integrate, and test systems
• Put together trade studies and definition studies for validating & interfacing subsystem or system elements
• Defines allocations to lower levels (elements and components)
• Develop and evaluate systems, networks and information systems to meet applicable governmental security specifications
• Participate in Modeling and Simulation
• Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application
• Define processes for technical platforms, system specifications, input/output and working parameters for hardware and/or software compatibility
• Support generation of technical engineering products via appropriate standards, processes, procedures, and tools throughout the system development life cycle
• Independently determine proposed approach to solutions
• Contribute to the completion of major programs and projects
• Creative, innovative responsibilities requiring advanced decision-making skills
• Designs a complete and complex framework, system or product; Identifies, analyzes and resolves system design weaknesses
• Contact with Deputy Program Managers Engineering (DPME) and other professionals within the Engineering department and with project teams across the company
• May provide system accreditation/certification evaluation and test support to ensure all technical security features (e.g., identification, authentication, access control, labeling, and auditing) of the system are considered and function properly
• May develop system security documentation on both new and fielded information systems
• May provide leadership and/or direction to lower level employees
• Frequent contact with external customers
• Travel may be required

Qualifications:
• Required – active Secret clearance. Candidates without active clearance will not be considered.
• Proficient in systems engineering concepts, principles, and theories; also in related disciplines
• Proficient with requirements management & system modeling tools
• Recognizes various architectural patterns
• Proficient in MS Office
• Creative thinker; multi-tasker
• Can quickly grasp and apply new information and effectively handle complex assignments
• Demonstrates good judgment in selecting methods and techniques for obtaining solutions
• Shows initiative, exercises independent judgment, and professionally executes projects with little direction
• Proficient written and verbal communications skills to:
o communicate issues, impacts, and corrective actions
o sell concepts and ideas
o clearly report relevant to sound systems engineering design
• Agile experience preferred.
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree in Systems Engineering or a related field required (or equivalent experience), and 5+ years’ experience; or Master's degree and 3+ years’ experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7829
Job Location: Pittsfield, MA
Rate: Based on experience
Duration: 12 Months
Input Date: 01/30/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aeronautical Engineer 3

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Aeronautical Engineer 3
(U.S. Citizenship Required*)
Fort Worth, TX
2019-7907


Responsibilities:
• Design Engineering position for F-35 Control Surface and Edge (CS&E) Engineering team.
• Layout and detail design airframe structural configuration, including structural layouts, preliminary sizing, joint layouts and part design with CATIA v5, utilizing metallic and composite materials.
• Change CATIA models, drawings and other supporting documents in support of the product.
• Coordinate and manage suppliers.
• Interface with various customers and internal management.
• Occasional travel including possible international travel.

Qualification:
• Required – able to obtain Secret clearance; current clearance preferred.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree and 9-15 years’ experience; or Master’s degree and 7-13 years’ experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7907
Job Location: Fort Worth, TX
Rate: Based on experience
Duration: 50 Weeks, 5 Days
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kay Lamar
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Aerospace Engineer - Air Systems

Description:
  1. Support Flight Testing Activities, including but not limited to:
    1. Discuss and review test plans and preparation activities.
    2. Help determine test specifications (based upon system architecture).
    3. Attend Ground/Flight Test briefing and debriefings
    4. Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
    5. Generate developmental engineering drawings and instrumentation change requests as required.
    6. Monitor live flight data, typically via telemetry, during flight test on aircraft.
    7. Create and review Aircraft Restrictions
    8. Create and review Aircraft Troubleshootings
    9. Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
    10. Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
    11. Process, analyze, and draw conclusions from post flight data.
    12. Identify non-conformances, quality escapes, etc. to create rejection tags.
    13. Make assessments to ensure safety of flight determination.
    14. Document flight test design problems for long term fix.
    15. Generate and review appropriate limitations documentation.
    16. Write flight test results reports.

  2. Complete special projects and tasks assigned by Group Lead.

  • Level Requirements (Minimum):
    Education
     
  • Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation). 
    • Other Engineering fields may be considered.

  • Experience
     
  • Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.



Knowledge/Skills/Abilities:
 
  • Strong knowledge of flight test operations and flight certification, including knowledge of aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
  • Good leadership presence as well as people management skills: 
    • Future-oriented in thinking and operation.
    • Able to lead by example and live/work by company values.
    • Ability to successfully contribute to a positive and productive work environment.
    • Able to instill a sense of urgency in team members.
    • Able to be patient and objective in difficult situations with different types of people.

  • Strong skill set for: 
    • Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
    • Strong follow-through, quick thinking and resourceful.
    • Ability to remain calm, cool and collected in stressful situations.
    • Strong sense of urgency to resolve the issue.

  • Strong organizational, time management and prioritization skills:
    • Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
    • Able to be flexible with attention and priority.
    • Ability to work in a progressive, fast-paced environment (work well under pressure).

  • Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
  • Strong communication skills (oral, written, presentation) with both external and internal team.
    • Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
    • Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
    • Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
    • Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
    • Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
    • Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems. 
    • Proven track record of improving the efficiency of assigned processes or procedures.
       
       


 
Job Number: 1810087672
Job Location: Seattle, WA
Duration: 6 months
Input Date: 06/27/2018
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mYpuAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer- Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

•​Review and support Avionics Certification Activities.

•Create and review Certification Plans.

•Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.

•Review qualification by similarity and/or analysis reports.

•Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).

•Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.

•Perform Component Drawing Reviews.

•Complete aircraft assembly and installation drawing reviews.

•Participate in System Design Reviews.

•Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.

•Coordinate with certification authorities to seek clarification on requirements.

•Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.

•Create, review and approve interface control documents and any sub level writing interface documents.

•Support Avionics Flight Testing Activities, including but not limited to:

•Discuss, write and review test plans and preparation activities with flight test team.

•Help prepare and review pre and post flight briefing.

•Monitor live flight data, typically via telemetry, during flight test on aircraft.

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety pf flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate limitations documentation.

•Complete special projects and tasks assigned by Group Lead.






Requirements

Knowledge/Skills/Abilities

•Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).

•Good leadership presence as well as people management skills:

•Future-oriented in thinking and operation.

•Able to lead by example and live/work by company values.

•Ability to successfully contribute to a positive and productive work environment.

•Able to in still a sense of urgency in team members.

•Able to be patient and objective in difficult situations with different types of people.

•Strong customer service tool box:

•Professional mannerisms, appearance and actions (self-confident and committed to high ethics).

•Strong follow-through, quick thinking and resourceful.

•Ability to remain calm, cool and collected in stressful situations.

•Strong sense of urgency to resolve customer needs.

•Strong organizational, time management and prioritization skills:

•Able to multi-task, maintain focus on several different projects at one time and hit deadlines.

•Able to be flexible with attention and priority.

•Ability to work in a progressive, fast-paced environment (work well under pressure).

•Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.

•Strong communication skills (oral, written, presentation) with both external and internal customers.

•Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.

•Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.

•Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.

•Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.

•Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.

•Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.

•Proven track record of improving the efficiency of assigned processes or procedures.


Education

•Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).

•Other Engineering fields may be considered.


Experience

•Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2018
Last Updated: 02/05/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tool Designer Catia (336)

Description:
*This is a full-time, 1 year contract position located in Fort Worth, TX*

We are seeking a skilled tool designer who will be creating fixtures, tooling and equipment. Candidate will develop test procedures and update existing technical manuals.



Daily duties will involve designing, developing and implementing industrial machinery and equipment taking into account accessibility, economy, mobility, and performance requirements. Will use CAD/CAM to design tools, [CATIA].

Required:
*9 years experience in aerospace tool design using CATIA.

*Experience with tools, dies, gauges, jigs, fixtures, prototype and experimental model production.

*Familiar with factors in tooling such as as accessibility, economy, mobility, and performance requirements.
*Experience in analyzing and interpreting engineering drawings and technical documents and formulating test procedures.
*Active Secret Clearance (and reinvestigated within last five years)

*Perdiem Split available for out of town candidates



Preferred:

*GD&T

*AS or 4 year degree
 
Job Number: 336
Job Location: Fort Worth, TX
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Structures Design Engineer - CATIA V5 - Los Angeles

Description:
Keltia Design, Inc. is a technical support services company in Everett, WA supplying CAD design, technical recruiting, and CAD training services to customers in the Aerospace industry on a permanent or contractual basis. We have been in business for over 18 years.

Our client in the Los Angeles area is looking for a CATIA V5 structural design engineer to work on a freighter conversion. Airbus experience and modifications to aircraft structure relative to cargo doors area and cargo handling systems is also desired.

Please describe your experience in detal with CATIA v5, emphasizing when it was last used for design, modeling, and drawing, and how it applies to Primary Structures.
 
Job Number: Keltia111417
Job Location: Los Angeles, CA
Rate: 50-55/hr
Per Diem: possible
Overtime: No
Duration: 6mo +
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Systems Design Engineer

Description:
Description
Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process and subsystems/component qualification
Develops and refines system level requirements for vehicle systems based on customer and implied requirements
Ability to evaluate flight test and component qualification data for verification and validation purposes and to identify further testing or development/re-design work
Reviews, updates, and compiles engineering definition of aircraft system components and assemblies based on records from the current prototype aircraft program
Supports review of manufacturing plans and procedures to ensure compliance with design requirements
Supports the creation of system test plans which will be used to verify the design intent meets requirements
Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes


Qualifications
B.S. degree in Mechanical, Aerospace, or similar discipline is required
8+ years of relevant industry experience; 10+ years is preferred
Experience with CATIA V5 strongly preferred, or SOLIDWORKS or equivalent
Experience in aircraft systems design, (mechanical, pneumatic, electrical) assembly and test processes
Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, and PowerPoint
Strong team player and ability to work independently with excellent organizational and problem-solving skills
Knowledge and experience with AS9100 a plus
Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
Experience with manufacturing based ERP systems a plus


The Structures Company is an AA/EOE.
 
Job Number: 266
Job Location: CA
Rate: $65-$70/Hr. **DOE**
Per Diem: Yes
Overtime: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/22/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe/Structural Designers - Many needed

Description:
• V5 required—Part Design & Sketcher, Assy Design, Wireframe & Surface, & Drafting workbenches
• V6 preferred
• Enovia preferred
• Aerospace Sheet Metal Workbench preferred
• Experience with monolithic structure
• Experience with reduced dimension drawings preferred

Email resume to: mmccarthy@pdstech.com
 
Job Number: Struc-Tex
Job Location: Wichita, KS
Rate: $65.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 01/31/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembly Mechanic 2nd Shift - Aerospace - Everett WA

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

We are working with a leading Aerospace Manufacturing client with multiple openings in the Everett WA and Kent WA Areas

Summary Description:
Assembles fabricated/machined metal parts and standards into partial or completed assemblies.

Job Duties and Responsibilities:
•Reads and interprets written work orders and aerospace blueprints and drawings to determine parts requirements and sequence of assembly step.
•Cleans or otherwise prepares part surfaces for assembly.
•Applies and cleans excess adhesives, lubricants, sealants, and other substances as required by work order, drawing, and/or blueprint instructions to piece parts for assembly.
•Inserts rings, pins, and other standards and fastens parts together using nuts, bolts, screws, clips, rivets, or other fasteners.
•Uses hammers, punches, pliers, screwdrivers, wrenches, rivet guns, and other hand tools to perform assembly operation.
•Installs bushings and bearings and uses hand tools to produce close fit between parts.
•Operates drill presses, presses, or riveting machines to assist in assembly operation.
•Uses micrometers, force gauges, calipers, torque wrenches, dial indicators, and other types of precision measuring tools and equipment. Reads measuring tools and interprets readings in performing assembly operations.
•Handles parts, subassemblies and assemblies with care to ensure those with finishes or special coatings are not damaged or blemished.
•Performs functional testing.
•Meets established standards for productivity and quality. Confers with supervisor when problems occur which impact expected levels of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read, analyze, and interpret general business language, technical procedures, aerospace blueprints and drawings, manuals, governmental regulations, and safety procedures and instructions.
•Ability to add or subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
•Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to use hands to finger, handle, or feel; reach with hands and arms; and talk or listen.
•Must be able to sit or stand for at least 10 hours a day.
•The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions

Level Requirements:
•Minimum◦High school diploma or general education degree (GED) and one year or more related experience and/or training; or equivalent combination of education and experience.
 
Job Location: Everett, WA
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Rebecca
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic System Engineer

Description:
General Summary:
The Avionics System Engineer will be responsible for the design, development, and integration of the assigned avionics systems for the aircraft.

Duties and Responsibilities:
• Perform systems level integration activities for aircraft avionic systems including: Control and Display Systems; Navigations Systems; Communication Systems; Surveillance Systems; and Cabin Management Systems
• DO-160F/G, DO-178B and DO-254 experience required.
• Define, plan, and develop complex systems level requirements to support the avionic systems for the aircraft
• Provide technical assistance to production and customer service departments for support of system technical inquires and issue resolution
• Perform system evaluation and analysis to verify the system design compliance with functional requirements
• Conduct system lab testing and aircraft functional testing
• Prepare presentations on avionics system design/development status
• Support system analyses for avionic systems

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelors’ degree in Engineering; preferably in Electrical/Electronics Engineering or Aerospace Engineering
• Minimum of 6 years to a maximum of 10 years’ experience working with integrated aircraft avionic systems in the areas of design engineering, system analysis, and system test

Knowledge, Skills and Abilities:
• Working knowledge of design requirements of 14CFRPart 23
• Proficiency in writing technical documentation and reports involving test data and analysis
• Familiarity with avionics/electrical test laboratories and lab equipment
• Working knowledge of System qualification requirements including DO-160E/F for environmental, DO-178B for software, and DO-254 for complex electronic hardware
• Proficiency in requirements management tools such as DOORS
• Experience with PLM Tools such as TeamCenter and SAP

The Structures Company is an AA/EOE.
 
Job Number: 253
Job Location: NC
Rate: $60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 02/12/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

Avionics Assistant Manager

Description:
Aerospace Engineering specialist. 
  • Aerospace engineering experience in Avionics, including experience working with avionic systems utilized in vehicle design (Comm/Nav/ Surveillance/ FMS/ Displays/ Recorders/ CAS/ antenna installations).
  • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
  • 5+ years of aerospace experience.
  • Familiar with CPDLC/ACARS and Experimental Flight Testing
  • Ability to think critically, identify and synthesize important information necessary to inform flight test.
  • Strong ability to analyze test data/results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
  • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
  • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
  • Ability to represent professionally and positively among MFC teams interactions and actively build rapport and trust.
  • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
  • Management skill: Allocate task, control working time and work shift/rotation plan

Aerospace Engineering specialist 
  • Aerospace engineering experience in Avionics, including experience working with avionic systems utilized in vehicle design (Comm/Nav/ Surveillance/ FMS/ Displays/ Recorders/ CAS/ antenna installations).
  • Bachelors Degree in Engineering, Mathematics, Physics or related Science (or equivalent combination of work and experience).
  • 5+ years of aerospace experience.
  • Familiar with CPDLC/ACARS and Experimental Flight Testing
  • Ability to think critically, identify and synthesize important information necessary to inform flight test.
  • Strong ability to analyze test data/results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations, etc.)
  • A team player with the ability to thrive in a fast-paced environment and work effectively with others across disciplines, functions and organizations.
  • Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
  • Ability to represent professionally and positively among MFC teams interactions and actively build rapport and trust.
  • Computer Skills: Comfortable and proficient working in Microsoft Office. Intermediate Excel proficiency required.
  • Management skill: Allocate task, control working time and work shift/rotation plan

 
Job Number: 1810081415
Job Location: Moses Lake, WA
Duration: 24 months
Input Date: 02/09/2018
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002dvoRAAQ&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/15/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Technicians - Top Rate + Expenses

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada. We are based in Everett WA and have been in business for over 18 years.

Our client in the Moses Lake area of WA has a short term (1-2 months in length with the possibility to extend) contract assignment for highly experienced Avionic Technicians with wire installation, that preferably have an Airframe and Powerplant (A&P) licence certification.

The client will pay top rate with per diem and accommodations to get the right people there for the project.

Description:
* Perform assembly, installation and test tasks on wire harnesses, control boxes, and electromec assemblies per instructions.
* Perform verifications of flight hardware and documenting results in a clear, precise and complete manner
* Perform systems tests using Avionics test equipment
* Proven ability to troubleshoot basic problems
* Experience with EMC / EMI / RF testing etc
* Experience building wire harnesses including terminating and installing connectors.

Please e-mail Emily at emily@keltia-design.com with your updated resume, your desired pay rate, and the soonest available start date.
 
Job Number: KeltiaML2018
Job Location: Moses Lake, WA
Per Diem: Yes
Overtime: Possible
Duration: ST
Start Date: ASAP
Input Date: 11/13/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC MACHINIST

Description:
JSG is looking for a - Mills/Lathes to work at one of our premier Aerospace Clients in Simi Valley, CA.

Local Candidates Preferred

Position Summary:

The candidate will be required to set-up, operate, and adjust CNC machines, Lathes and/or Mills. Work from drawings and written instructions to create parts. May need to make offsets to programs on CNC Machines.

Job Responsibilities:

Responsible for all phases of part operations, maintains part conformance per sketch and drawing requirements.
Perform and maintain accurate in-process quality inspection and records.
Identify and recommend process improvements that reduce part quality variation.
Input data into visual management forms and convey results to management.
Continuously improve processes, procedures, and eliminate waste.
Qualifications

3-5 years experience operating CNC Lathes and/or Mills
Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.
Ability to maintain close tolerances (within .0003”), hold .0003 profile, roundness.
Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma
Per ITAR requirements, must be a US Citizen or Permanent Resident Card Holder)
 
Job Number: 368084
Job Location: Simi Valley, CA
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/22/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist - Aerospace - Ellensburg WA Area

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US. We have been in business since 2000.

CNC Machinist

Sets up and operates a variety of machine tools such as lathes, milling machines, shapers, planers, and precision grinders to make metal parts, mechanisms, tools, or machines to exacting tolerances and dimensions.

Responsibilities
Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup; uses a variety of machinist's hand tools and precision measuring instruments; makes standard shop computations relating to dimensions of work, tooling, feeds, and speeds; measures, marks, and scribes dimensions and reference points to lay out stock for machining; fits and assembles precision parts into mechanical equipment and determines material, parts, and equipment required.

Some machines may be numerically controlled. May monitor and verify quality in accordance with statistical process or other control procedures and certify/test product.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching

Qualifications
Must be able to efficiently setup and run one or more of the following types of equipment independently and meet expected manufacturing standards:
CNC Mill
CNC Turn
Experience & Knowledge
Required knowledge of GD&T, and ability to read blueprints, parts drawings, and setup books.
Preferred Math skills such as algebra, geometry, and trigonometry.  Desire to work in team environment: work positively and collaboratively with others, contribute to the work cell, be open and receptive to ideas and feedback, and treat others with respect
Skills & Competencies:
High school diploma or equivalent with 1-2 years related experience.
Post high school coursework or professional certification preferred.
 
Job Location: Ellensburg, WA
Rate: DOE
Duration: Contract to Direct
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist 1st and 3rd Shift- Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team. This is a weekend/night shift of 3 twelve hour shifts with pay for 40 hours.
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

Cabinet Finisher II

Description:
PDS is seeking a Cabinet Finisher II  for an open position in Savannah, GA.

Under general supervision, prepares and applies finishes to aircraft furniture using aircraft specifications, designs and engineering drawings with a high level of safety, quality, detail and productivity. Assists team members with greater experience to enhance techniques supportive of quality workmanship. 

Principal Duties and Responsibilities: 

Essential Functions: 1. Works under general supervision to prepare furniture for finish and disassembly using blueprints, aircraft specifications and design/engineering drawings. 2. Performs high quality repairs to various finished surfaces in the shop and aboard aircraft. Cleans and polishes blemishes as needed to prepare the aircraft for delivery. Applies finish to furniture using spray equipment and other manual/mechanical methods. 3. Uses various types of sandpapers, polishes, adhesives, masking mediums, solvents, finish materials, hand tools and various power tools to disassemble and finish furniture. 4. Complies with all safety, 5S, and housekeeping policies. Uses personal protective equipment to protect aircraft interior (PTP). 5. Uses the material tracking system to create parts demand, track squawks and to sign-off work. 

Additional Functions: 1. Works with lead and higher skilled technicians to develop and implement process improvements that increase safety, reduce, cost, cycle time, and man-hours using Lean Six-Sigma and other process improvement techniques. 2. Performs other duties as required. 

Please contact our Altanta or Savannah offices:  Atlanta@pdstech.com Office: 877-272-0088 and SavannahBranch@pdstech.com Office: 912-480-4706
 

Education and Experience Requirements:

High school diploma/GED. Two (2) years experience in wood finishing. Experience in aerospace industry preferred. Basic knowledge of cabinet finishing processes and products.

 



Unique Skills:



Knowledge of Solumina preferred but not required.

Other Requirements: 1. Possess a working knowledge of inspection and process specifications. 2. The ability to read, write, speak, and understand the English language. 3. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. 4. Must be computer literate.


 
Job Number: 1810082578
Job Location: Savannah, GA
Duration: 6 months
Input Date: 04/25/2018
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Rodney Kinlaw
Address: 900 CIRCLE 75 PKWY SE STE 600
City, State: ATLANTA, GA 30339
800 Phone: 866/224-2745
Email: southeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002e0N6AAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia Design Engineer Secret Cleared (461)

Description:
*This is full time, 6 month contract position located in Palmdale, CA*



We are hiring for an Aerospace Catia Design Engineer who will be designing subsystems for DoD vehicles. Systems may include avionics, fuel, hydraulics, power or environmental controls for advanced air vehicles. The candidate will be working with MIL-SPEC and MIL-STD specifications for the various subsystems involved in the vehicles.



On a daily basis, candidate will be creating drawings, schematics, wire lists and work instructions including selection of components, creation and or modification of system requirements, interface/supplier control drawings, performance specifications, system checkout procedures, statements of work, trade studies, and component/ground/flight test plans.

Required:

*With an AS Degree, 14-16 years experience designing and modelling using Catia for DoD components and applications including test, and validation of new and modified subsystem designs.

*With a BA Degree same as above but only with 11 years or more experience needed.

*Ability to read and create schematics, drawings and interpret work instructions.

*Experience with GD&T

*Active Secret Clearance (investigation in last 5 years)
 
Job Number: 461
Job Location: Palmdale, CA
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer

Description:
Our client is looking for a Certification Engineer to work in Greenville, South Carolina! Apply today with your most recent resume and if you meet the qualifications a recruiter will be in contact with you!

The ideal candidate for this position will perform the following tasks:
* Responsible for providing Certification Engineering related to an avionics design in support of a CNS/ATM upgrade on a C-130H aircraft.
* Develop, compile, and/or coordinate internal and external resources to assist in the development of data to support the “Certification” activities with items such as Project Specific Certification Plans, Conformity Inspection Plans, Test Plans, Test Reports, Instructions for Continued Airworthiness, EWIS Zonal Analysis, Functional Hazard Assessments, System Safety Assessments, and Request for Conformities for STC data packages

Mandatory Qualifications and Experience:
* Bachelor's Degree in an engineering discipline related to Aerospace Certification with at least 7 years of certification experience.
* A demonstrated and extensive understanding of aircraft engineering and certification functions, procedures, standards and methods.

Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
 
Job Number: 129606
Job Location: Greenville, SC
Start Date: ASAP
Input Date: 01/23/2019
Last Updated: 01/30/2019
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Computer System Analyst

Description:
The TacMobile Program provides the ground support elements for pre-flight mission planning, in-flight data processing, and post-flight data processing and analysis for P-3C and P-8A aircraft in the performance of anti-submarine warfare and intelligence, surveillance, and reconnaissance missions. We offer a competitive compensation and benefits package. Join our team as:

Computer System Analyst
Systems Administrator
Charleston, SC
2019-7913


Responsibilities:
• System Administrators with Windows Server 2008, 2012, MS SQL, LINUX 6.x experience.
• Experience administering complex System of Systems; GCCS-M, SOLARIS 10/11 experience.
• Technical certifications highly desired. Ability to generate concise build plans (BP), System Version Documents (SVD), and Installation Guides (IG) critical.

Qualifications:
• Required – active Secret clearance. Candidates without clearance will not be considered.
• Previous Naval experience preferred.
• Willing and able to obtain Security+
• HBSS & ACAS experience preferred

Required Education:
• High School Diploma or GED and experience in a related field.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an affirmative action and equal opportunity employer.

Join a team that values your experience!
 
Job Number: 2019-7913
Job Location: Charleston, SC
Rate: Based on experience
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: jobs@moseleytechnical.com
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Data Visualization Designer

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Data Visualization Designer
(U.S. Citizenship Required*)
Mesa, AZ
2019-7885

Join our HR Services team as an analyst with a unique blend of business and technical acumen. You will leverage systems thinking in order to balance the end-user experience with function, while defining and developing effective metrics and analytic solutions. You will need to thrive in a fast-paced, environment and enjoy working with people of diverse backgrounds and cultures.

Responsibilities:
• Research, plan, develop, recommend, and implement dashboards and data visualizations in Tableau to meet the organization's business needs.
• Transition existing reports from existing reporting platforms to Tableau and develop new reports as assigned.
• Draw upon a full range of Tableau functions and features to design, develop, enhance and support Tableau visualizations.
• Create effective Business Intelligence (BI) solutions and analytical dashboards in Tableau.
• Build and publish customized interactive Tableau dashboards along with data refresh scheduling using Tableau Desktop and Tableau Server.
• Effectively use features and Best Practices of Tableau and visual analytics to maximize impact and utility of visualization products.
• Manage a repository of re-usable data visualization templates and views.
• Support activities to document, evolve, and communicate artifacts developed using Tableau.

Qualification:
• 2+ years of experience in Tableau required; Tableau certification preferred.
• 1+ year of Data Analysis experience required; Data analytics experience preferred.
• 1+ year of requirements gathering
• 1+ year of Software development life cycle/Agile methodology
• Skilled in developing all Tableau chart types (examples include stack bars, bar graphs, scattered plots, geographical maps, line charts, Gantt charts, and more)
• Strong SQL development skills – writing complex queries and stored procedures.
• Able to work well in cross functional teams, diverse customer sets, inclusive of leadership and groups outside the home organization.
• Self-motivated and comfortable working in a busy and dynamic environment with competing priorities
• Able to prioritize requests effectively and efficiently and work with a sense of urgency based on organizational guidelines.
• Able to communicate with both technical and non-technical personnel in terms that they understand.
• Oversee the design and delivery of metrics and analytics. This will include accuracy of data and deliverables.
• Provide ad-hoc analysis and key metrics across the HR Services group.
• Experience with SQL and writing complex queries preferred
• Experience working on Enterprise Data Warehouse environment preferred
• Strong understanding of software development life cycle, Agile, and project management methodologies.
• Excellent communication, documentation, and presentation skills.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's and typically 6+ years’ related work experience, a Master’s degree and typically 4+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7885
Job Location: Mesa, AZ
Rate: Based on experience
Duration: 12 Months
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kay Lamar
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Database Architect / Engineer 3

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Database Architect / Engineer 3
(U.S. Citizenship Required*)
Ft. Worth, TX
2019-7808


Responsibilities:
• Design, develop, build, analyze, evaluate, and install database management systems to include database modeling & design, relational database architecture, metadata & repository creation and configuration management.
• Use data mapping, mining, and transformational analysis tools to design and develop databases.
• Prepare system requirements, source analysis and process analyses and design throughout the database implementation.

Qualification:
• Able to use different methods, processes, and algorithms and systems to extract knowledge and insights from data in various forms.
• Have existing experience with SAP HANA or is familiar with SAP HANA.
• Advanced JavaScript skills/experience (2-4 years) required
• Skill/experience in HTML and/or Java also preferred
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree and 9-15 years’ experience, or Master’s degree and 7-13 years’ experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7808
Job Location: Fort Worth, TX
Rate: Based on experience
Duration: 52 Weeks, 2 Days
Input Date: 01/29/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jarrett Lee
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2019-7812

Responsibilities:
• Support concept to production H/W including requirements analysis, electronic design, debug, test, and qualification
• Design, develop, and test Electronic H/W products, components, and subsystems.
• Create detailed circuit board specifications, ICD's, and test plans.
• Develop circuit card assembly schematics, layout guidelines, and support CCA layout
• Support component selection, procurement, and oversight of prototype hardware build.
• Support concurrent engineering reviews and trade studies.
• Develop engineering design fixes, and coordinate solutions.
• Perform technology research, feasibility assessments, and detailed hardware design requirements definition.
• Develop concepts to support advanced technology initiatives, IRADS, proposals, and demonstrators.

Qualifications:
• Experience with Mentor Graphics DxDesigner schematic capture, PADS
• Experience with analog and digital circuit design, including PCB design.
• Experience with single board computers and microcontrollers.
• Experience with FPGA design and simulation, VHDL
• Experience with analog and digital video circuits.
• Experience with display technologies and video distribution techniques preferred.
• Able to use engineering development and test tools.
• Familiarity with military standards and test requirements desired.
• Capable of obtaining a security clearance (if required).
• Occasional overtime, and weekend hours may be required to complete critical tasks.
• Strong interpersonal skills and ability to work with interdisciplinary teams.
• Strong multi-tasking skills.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in electrical engineering with 10+ years of applicable experience.
• Fewer years will be considered with an advanced degree. Other technical degrees will be considered with relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7812
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 01/29/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kinleney Riley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Director, Training & Flight Operations

Description:
Legacy Engineering, a division of PDS Tech, is seeking candidates for Director, Training & Flight Operations, Customer Support Division for the Regional Jet Development Program. 
This position is located in Nagoya, Japan.  

In this role, you will be responsible for the development and delivery of Regional Jet Customer training, flight manuals and flight operations engineering support. 



  • Training services include the development of courseware, training devices, training manuals and delivery of initial and recurrent training for Pilots, Technical/Mechanics, Cabin Crews, Ground Servicing Crews, and Dispatchers within an airline. In addition, this person must manage the relationship and performance of CAE, the Company's selected training service provider. 
  • Development, verification/validation and certification of flight operations manuals
  • Flight Operations Engineering support to Company's customers


Responsibilities include establishing deliverable commitments, establishing work priorities, creating and managing the development process, creating the team and team structure, implementing governance and communication processes, and evaluating the performance of the group.


Work Location
The Primary Work Location will be Nagoya, Japan.  Travel to USA or other country will be required.

Scope of Work
Specific Training responsibilities include:

  • Overall management of the relationship with and performance of CAE, Company’s training services provider, ensuring training devices and services are high quality at market prices
  • Development and maintenance of training curriculum and courseware for pilots, technicians/mechanics, flight attendants, and flight planning engineers, and ground handling services
  • Development and maintenance of training documentation for each course offered
  • Ensure there are sufficient qualified training instructors located at training delivery sites for the life of the aircraft
  • Ensure training devices (e.g., Full Flight Simulators (FFS), Integrated Procedures Trainers (IPT), Virtual Maintenance Trainers (VMT), Computer Based Training (CBT), Door Trainer and Cabin Trainers) & training facilities meet training objectives and are certified (where applicable) by regulators
  • Obtain regulator certifications such as OSD, FSB, etc.
  • Commitment of training services (both proforma and for fee) to customers as part of the airplane sales process
  • Scheduling customer training at a location that minimizes customer travel costs, meets customer requirements for timing (schedule), and fits within the Company's Training Program strategy.

 
Specific Flight Operations Support responsibilities include:

  • Define the process interfaces with Flight Test organization, Pilot organization and Flight operation engineering organization. 
  • Development, verification/validation, maintenance and delivery of all technical and administrative documents in support of customer’s flight operations.
    • Airplane Flight Manual (AFM)
    • Flight Crew Operating Manual (FCOM)
    • Quick Reference Handbook (QRH)
    • Weight & Balance Manual (WBM)
    • Master Minimum Equipment List (MMEL)
    • Dispatch Deviation Guide (DDG)
    • Flight Crew Training Manual (FCTM)
    • Cabin Crew Operating Manual (CCOM)
    • Aircraft Characteristics for Airport Planning (AC)



  • Ensure documents meet industry standards for content and format by participating in and influencing industry standards board that define flight operations documentation requirements
  • Create airplane performance databases and may provide specialized training courses to customers to assist them in their understanding and use of the airplane and documents listed above.  Such courses may include:
    • Performance Engineers course
    • Weight & Balance course

  • Review and approve requests from airlines for non-normal operations such as flight with missing secondary structure
  • Respond to Flight Operations related Customer Service Requests.  Utilize the Safety Process for emergent Flight Operations related Safety issues.
  • Prepare and Release Flight Operations Bulletins.  MITAC must define both a Routine bulletin type as well as an Alert bulletin type to correspond to the Maintenance related Service Bulletins
  • Define a change process that addresses Flight Operations related changes that may impact the certification basis of the airplane (e.g. Airplane Flight Manual)

Expected Education/Experience and Skills:



  1. Qualified candidates must hold an engineering degree from an accredited Engineering School.
  2. Candidates must have worked in commercial aerospace for an Original Equipment Manufacturer (OEM), and have 5 or more years in managerial positions providing Training and/or Flight Operations management functions to commercial airline customers.
  3. Commercial pilots license preferred.
  4. Candidates must have skills and experience managing Partners and Suppliers.

 
Job Number: 1710068573
Job Location: Nagoya,
Duration: 36 months
Input Date: 09/21/2018
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002JqSMAA0&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Document Management Architect

Description:
Document Management Architect

Windsor Locks, CT
$90.75/hr
6 month contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
UTAS utilizes Document Management tools in a global environment. Will need to support the current UTAS Communications and Collaboration collection of document management applications. Specify design and implement Document Management software and its integration with other applications. Participate in UTAS Collaboration Tools strategic projects. Select, blueprint, gather requirements, design, and roll out solutions to end users. Ensure our systems stay compliant with UTC policies, US and International laws. The Document Management Architect is also responsible for ensuring high levels of system availability through monitoring and in-depth testing. Execute IT projects that support UTC Aerospace Systems business objectives. The projects can include developing custom applications or implementing software solutions purchased from a third party Application Service Providers. Projects typically involve working with UTC divisions.

1. Build and configure Document Management environments.
2. Support and maintain existing installations of Documentum.
3. Perform configuration changes as needed on production environment which are submitted through Help Desk tickets and service requests.
4. Review and fix Documentum security as needed.
5. Ensure knowledge transfer of best practices.
6. Provide ongoing operation and maintenance activities including periodic software upgrades.
7. Ensure technical architecture designs are compatible with the department's current / future standards and are supportable.
8. Assess and cultivate long-term strategic goals for Documentum development in conjunction with end users, managers, clients, and other stakeholders.
9. Direct, organize, and lead projects in the implementation and use of Documentum software tools and systems.
10. Design, test, and document all modification of the Documentum environment.
11. Analyze user requirements and, based on findings, design functional specifications for Documentum.
12. Conduct job duties and responsibilities according to the organization’s business systems development methodology and/or its Systems Development Life Cycle (SDLC) methodology. Also, familiar with the Agile methodology.
13. Assist end-user training and training materials; provide technical support as necessary.
14. Troubleshoot tools, systems, and software; performance-tune these applications as necessary.
15. Remain abreast of trends in relevant software and technologies. As required, lead efforts to analyze and recommend solutions.

Experience/Skills:
1. Experience / knowledge the following technologies:
• Documentum 7.x, including DA, Webtop, xPlore, API/DQL queries
• D2 4.7 Development & Configuration, C2, and D2
• Support of Captiva 7.5 Modules and Customization
• Microsoft .NET Software Development
• Linux Server Administration
• C#, VB .NET
• Windows Server
• Microsoft SQL Server Basics
• Oracle Basics
2. Minimum of 7 - 10 years direct work experience.
3. Strong ability to install and configure a Documentum.
4. Strong understanding of Documentum: theories, principles, and practices.
5. Exceptional analytical, conceptual, and problem-solving abilities.
6. Strong understanding of the organization’s goals and objectives.
7. Strong written and oral communication skills.
8. Strong presentation and interpersonal skills.
9. Able to prioritize and execute tasks in a high-pressure environment.
10. Experience working in a team-oriented, collaborative environment.
11. Experience will be acceptable in lieu degree.
 
Job Number: 10309
Job Location: Windsor Locks, CT
Rate: 90.75
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 01/17/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Door Design Engineers - Many Needed

Description:
• Minimum 5 years aircraft structure and/or mechanical system design experience
• CATIA V6 ENOVIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
• Strong mechanical aptitude
• Experience with Microsoft Office Word, Excel, PowerPoint are required, Project experience is desired.
• Bachelor’s Degree or higher from an ABET accredited institution in Mechanical Engineering, Aerospace Engineering, or other related engineering field.
• 14 CFR Part 23/25 aircraft door design experience (passenger entry, cargo, emergency exit)
• Aircraft aluminum structure design; fluent with typical fabrication and assembly processes (forming, machining, fastening, etc.)
• Aircraft mechanical system design;
• ASME Y14.5 Geometric Dimensioning and Tolerancing fluent
• Pilot’s license, A&P rating and/or applicable hands on aircraft experience are also desirable but not required

Email resume: mmccarthy@pdstech.com
 
Job Number: Door-Tex
Job Location: Wichita, KS
Rate: $65.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 12 Months+
Start Date: ASAP
Input Date: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Ice Protection Design Engineers - Many Needed

Description:
• 3+ years of related experience in the design, development and testing of Environmental Control Systems and/or Ice Protection systems on fixed wing aircraft
• CATIA V6 ENOVIA fluent for preparation of layouts, trade studies, kinematic models, and engineering drawings
• General knowledge of Cessna engineering tools strongly preferred (PIOS/EEDS/Enovia V6)
• Strong mechanical aptitude
• Demonstrated ability to collaborate with multiple support functions (engineering – all disciplines, manufacturing, customer support, integrated operations, procurement, supply chain)
• Experience with Microsoft Office Word, Excel, PowerPoint are required.
• Bachelor’s Degree or higher from an ABET accredited institution in Mechanical Engineering, Aerospace Engineering, or other related engineering field.
• Aircraft aluminum structure design; familiar with typical fabrication and assembly processes (forming, machining, fastening, etc.)
• Aircraft mechanical system design

Email resume to: mmccarthy@pdstech.com
 
Job Number: ECS-Tex
Input Date: 02/19/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann Mc
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

ECS System Engineer - UM

Description:
PDS Tech Inc is seeking a ECS System Engineer - UM in Wichita, KS

Job Responsibilities:
 JOB RESPONSIBILITIES:
• Authoring System Safety Reports including Aircraft and System Functional Hazard Assessments, Common Mode Analysis, and Zonal Safety Analysis.
• Assisting authors with Preliminary System Safety Assessments, and System Safety Assessments. This includes supporting FMEA, fault tree analysis, qualitative and quantitative analysis, etc.
• Provide support for ODA Unit Member making findings of compliance for the FAA in the above areas or make finding of compliance as an ODA Unit Member.
• Assist systems design and engineering teams in ensuring all aspects of 23/25.1309 compliance are addressed including reviewing certification plans and supporting reports.

EDUCATION / EXPERIENCE:
• B.S. or advanced degree in Aeronautical, Mechanical, or Electrical Engineering, Physics, Math, Statistics or related technical degree required
• Minimum 7 years of experience in General Aviation or Business Aircraft development programs



 
 



 
JOB QUALIFICATIONS:
• Experience in System Safety/Reliability and/or aircraft mechanical, avionics or electrical systems design and/or certification is desired.
• Experience with domestic and foreign aircraft certification process is desired.
• Knowledge of the safety assessment processes outlined in AC 23.1309-1D SAE ARP 4761/4754A and the draft version of AC 25.1309 is desired.
• A working knowledge of DO-178 & DO-254 is desired.
• Experience in system assessment using modeling tools such as Failure Modes and Effect Analysis (FMEA), (Failure Modes and Effect Criticality Analysis (FMECA), Reliability Block Diagram (RBD), and Fault Trees Analysis (FTA) is desired.
• Ability to use Reliability Workbench (Fault Tree+) is desired.
• Experience with fault tree modeling tools such as Fault Tree+, Relex, and CAFTA is desired.
• Experience with Microsoft Office software application and working environment is required.
• The candidate must be able to work in a team environment and be able to clearly communicate thoughts and ideas with peers, management, and certification authorities

 
Job Number: 1910097709
Job Location: Wichita, KS
Duration: 12 months
Input Date: 01/24/2019
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Marjorie Santiago-Marquez
Address: 11828 W CENTRAL STE 100
City, State: WICHITA, KS 67212-5129
Phone: 316/729-1800
800 Phone: 800/333-8644
Fax Phone: 316/729-1857
Email: cecjwichita@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002r9TgQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 10/03/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 08/31/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications. The role will support the entire design life cycle from project planning efforts to entry into service and production transition support. Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.
The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.



Additional Job Details:
* Proficient with analog, digital circuit design, RF and wireless systems, building, and testing circuits in a lab environment
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change
* Hardware Verification experience including, test procedure development, robustness testing and debug
* Experience developing hardware/software integration plans
* Experience creating LRU level (black box) requirements based test cases and procedures, and executing systems verification testing consistent with DO-254 guidelines
* Excellent written and verbal skills
* Good computer skills with ability to learn new programs/software
* Ability to work under pressure and within time constraints
* Excellent organizational skills with ability to multi-task amidst rapid change
* Systems Verification experience including, test procedure development, robustness testing and debug
* Experience with configuration management and problem reporting tools Preferred Qualifications
* Experience working within DO-254 certification program(s), including Stages of Involvement (SOI) Audits under EASA or FAA
* Experience using Mentor Graphics DxDesigner and Expedition
* Masters degree in Electrical Engineering.
* Experience with high reliability controller electronics and power switching circuitry.
* Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C.
 
Job Number: 47270
Job Location: Phoenix, Az
Duration: 12 months
Start Date: ASAP
Input Date: 02/05/2019
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Rick Nussbaum
Address: 1857 WELLS RD STE 214
City, State: ORANGE PARK, FL 32073
Phone: 904/562-3221
800 Phone: 866/277-3343
Fax Phone: 904/713-2000
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Centennial, CO
$34.50/hr - $57.56/hr
9 month contract
First Shift
Possible Travel
*Must Be a U.S. Citizen*

Description:
-5+ years’ experience
-Aerospace experience required
-Bachelors degree required

Main task will be to provide technical system engineering support to existing electrical ground command and control systems. This position will be based in Denver with potential trips to Cape Canaveral Air Force Station and Vandenberg Air Force base.

Perform system level research and analysis of electrical interfaces for ground systems Commercial-Off-The-Shelf (COTS) hardware for command, control, communications and instrumentation systems, stand-alone Test Equipment systems, avionics systems and electro-mechanical interfacing devices. Duties include research and analysis of engineering drawings that include hardware at our launch sites located in Florida and California, in the Denver laboratories and implementation of data into a parameters database.

Tasks can vary from analysis of components in electrical equipment racks, electrical interface analysis of solenoid valves, I/P valves, various transducers, as well as avionics interface requirements. Many of our tasks involve instrumentation activities including interfacing to various types of transducers and understanding high-channel count Data Acquisition Systems (DAS), DC power systems, and analog/digital input/output hardware. Tasks also include creation and/or maintenance of all ground electrical design requirements documents, including validation and verification of requirements.
 
Job Number: 10339
Job Location: Centennial, CO
Rate: 34-57
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 04/09/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Circuit Design 5 (UVM) CA

Description:
Engineer Circuit Design 5 (UVM) (Job Number: 18020949)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Mar 25, 2019

Target End Date: Mar 20, 2020

Pay Rate: $85/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Northrop Grumman Aerospace Systems is seeking an Engineer Circuit Design 5 based in Redondo Beach, CA. This person will join the Digital Products Department. The ideal candidate is an Engineer experienced in Modeling and Verification. This person will work on multi-million gate ASIC and FPGA developments in the areas of digital communications, signal processing, network routing, embedded processors and switching applications for air and space applications.

The responsibilities of this position include developing verification plans, architecting and implementing verification environments, writing and executing tests, and documenting verification results to support requirements selloff. Candidate must have digital verification expertise


Basic Qualifications:

Bachelor's degree in a STEM discipline with a minimum 15 years of relevant

Verification using System Verilog and OVM/UVM.


Preferred Qualifications:

Mentor Questa simulator, VHDL or Verilog, PSL or SVA, C/C++, System C
 
Job Number: MB-1705
Job Location: Redondo Beach, CA
Rate: 80-85/hr
Per Diem: no
Duration: 12 months
Input Date: 12/10/2018
Last Updated: 03/13/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Design Rep N3

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Engineering Design Rep N3
(U.S. Citizenship or Green Card Required*)
Centennial, CO
2019-7828

Responsibilities:
• Provide engineering design packaging and drawing expertise within the Ground Command Control and Communications (GC3) Organization.
• Develop and complete drawings to be released in the configuration managing system.
• Drawing include design models, parts lists, documents and schematics.
• Develop drawings using model-based views, parametric dimensions and feature definition using best practices including geometric tolerancing and dimensioning.
• Use available automations and utilities to perform self-verifications of models, drawings and build of materials.
• Work within the applicable engineering release system to create or complete the change documents as needed.
• Create supporting administrative documentation and products associated with a given design, including the engineering (EBOM), Change summary documentation, accurate change cut in, Schedule/Milestone priorities, as applicable.

Qualification:
• Proficient in CAD Aided design and NX implementing electrical systems
• Proficient in Geometric and Tolerancing applications
• Proficient with MS Office (Word, Excel, PowerPoint, Outlook, etc.).
• Advanced understanding of electrical / electronic circuits.
• Involvement in and completion of technical class projects or on-the-job engineering tasks.
• Demonstrable communication skills (verbal and written; including presentations).
• Complete online profile and apply online to this requisition.
Preferred:
• Demonstrated experience in AutoCAD and NX implementing electrical systems, packaging and designs
• Able to perform CAD file sharing and conversion and file management.
• Understanding of electro mechanical interfaces
• Effective communication skills
• Able to manage multiple tasks; attention to detail; accuracy; self-motivated; initiative; teamwork
• Able to identify, process and resolve design issues
• Work with minimal supervision.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor of Science degree in Engineering and or Engineering Technology (Electrical or Computer)
• 5-8 years of applicable experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7828
Job Location: Centennial, CO
Rate: Based on experience
Duration: 6 Months
Input Date: 01/30/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jarrett Lee
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Planner/Scheduler

Description:
Engineering Planner/Scheduler

Location: Palmdale, CA
Pay Rate: $48.63/hr
Duration: 2 month contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Job Description:
Develop a compliant Integrated Master Schedule, Program Summary Master Schedule and other planning artifacts in support of proposal requirements and / or for program execution. Candidate must have current program execution experience with the ability to interpret and evaluate Contract Requirements and program artifacts in order to develop an Integrated Master Schedule in conformance with Lockheed Martin Aeronautics guidance and Industry best practices. Must be an expert in the field of Planning and Scheduling who is considered an authority in regards to planning and scheduling practices, both practical and theoretical. Must be able to collaborate with the program team members and provide scheduling guidance to develop a product compliant with customer contractual requirements. Integrated Master Schedules must be developed utilizing the appropriate vertical hierarchy of visibility from IMP (if applicable) and WBS allowing for the validation of progress to meet contractual requirements.

-Will accept exp in lieu of degree.
-Aviation/Aerospace master planning experience required. (Not manufacturing, materials or maintenance planners.)
-These are high level planner schedulers for program execution.
-There is potential for long term opportunity for the right candidate.
 
Job Number: 9706
Job Location: Palmdale, CA
Rate: 48.63
Per Diem: Possible
Overtime: Possible
Duration: 2 months
Start Date: ASAP
Input Date: 05/08/2019
Last Updated: 05/23/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers // Everett, WA and SC- Both states

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 6+ Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer



Equipment & Tool Engineer 3, 4

Location: Everett, WA
Duration: 4+ months

Job Description:
Successful candidates will have substantial experience with automated equipment startup, integration & optimization. Particular focus on development of Machine Failure Modes & Effect Analysis, with the ability to interpret results and turn them into preventative maintenance plans and min/max spares. Also critical to the role is ability to apply root cause corrective action problem solving to new production equipment. Team members will be applying Operational Equipment Effectiveness (OEE) continuous improvement methods to drive production system improvements. Finally, the ability to translate technical details into front line training for machine operators and maintenance technicians is highly desirable. Successful candidates will be working in a dynamic environment with broad cross functional team members.
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: Asap
Input Date: 10/11/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designers/ Engineers-Multiple Locations

Description:
Equipment & Tool Designer 3, 4

Location: Everett, WA / North Charleston, SC/ New Orleans, LA/Berkeley, MO
Duration: 6+ Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code: 66W-Tech Designer

----------------------------------------------------------------

Equipment & Tool Engineer 3, 4

Location: Everett, WA
Duration: 4-6+ months

Job Description:
Successful candidates will have substantial experience with automated equipment startup, integration & optimization. Particular focus on development of Machine Failure Modes & Effect Analysis, with the ability to interpret results and turn them into preventative maintenance plans and min/max spares. Also critical to the role is ability to apply root cause corrective action problem solving to new production equipment. Team members will be applying Operational Equipment Effectiveness (OEE) continuous improvement methods to drive production system improvements. Finally, the ability to translate technical details into front line training for machine operators and maintenance technicians is highly desirable. Successful candidates will be working in a dynamic environment with broad cross functional team members.
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, master’s with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Location: Everett, WA
Rate: Open
Per Diem: Split
Overtime: Yes
Duration: 4 months
Start Date: Asap
Input Date: 12/05/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Auburn, WA
Duration: 4 months

Description:
Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares.
Extensive knowledge of mechanical engineering principles (stress analysis, fatigue, strain, etc.)
Experience working with tool and equipment systems, software, and engineering methods
Experience leading projects across functions and/or business units

Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66V-Analysis Engineer

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 19-02162
Job Location: Auburn, WA || Everett, WA || Berkeley, MO || Huntington Beach, CA, WA
Per Diem: Available
Input Date: 02/11/2019
Last Updated: 02/28/2019
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 1201 PACIFIC AVE STE 600
City, State: TACOMA, WA 98402
Phone: 253/213-2012
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / DSP Design Engineer w/ ASIC (584)

Description:
*These are full time, 1 year contract positions, located in Orlando*


We seek a hands-on ASIC FPGA/DSP Design Engineer to design electronic circuits. Will be responsible for component selection, evaluation, test box design, prototype creation and checkout along with digital and analog analysis. Engineer will design and develop evaluation boards and test methodologies/interface hardware required to evaluate the design through systems integration, test and final device design and customer approval.



Required:
*6+ years’ experience for level 3, conducting firmware digital design engineering using FPGA/DSP or 11 years experience for Level 4 job.
*Familiar with video system design, synchronization, image processing operations and display formats.
*Active Secret Clearance

*On site work only, no remote work possible for this position.
*BSEE



Pluses:
*Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets.
*Familiar with Xilinx, Altera Part family internal FPGA fabric and IP and model based compilers

*Aerospace design experience
 
Job Number: 584
Job Location: Orlando, FL
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / Firmware Engineer

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

FPGA / Firmware Engineer
(U.S. Citizenship Required*)
Owego, NY
2019-7911

Responsibilities:
• Analyze, design, program, debug, and modify firmware and troubleshooting code for firmware (IC embedded code) applications.
• Work often involves analog and digital hardware.
• Typically programs in high level languages (e.g., Verilog, SystemVerilog, VHDL).

Qualification:
• Knowledge and exposure to hardware design.
• Experience with digital circuit / logic design, processor and/or RF design & architecture.
• Excellent oral and written communication skills are required.
• Experience programming in high level languages (e.g., Verilog, SystemVerilog, VHDL).
• Quartus Prime Pro (familiarity within last 3 years)
• Stratix 10 family of devices
Preferred:
• SystemVerilog, Digital Signal Processing, MATLAB, FIR filters, PCIe, memory interfaces.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• BS Degree in Computer Engineering or Electrical Engineering or closely related technical field or equivalent experience/combined education.
• 5+ years of professional level experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7911
Job Location: Owego, NY
Rate: Based on experience
Duration: 9 Months
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Design Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

FPGA Design Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2019-7853

Responsibilities:
• Develop FPGA firmware for display and processor products.
• Perform FPGA simulation and functional verification.
• Implement FPGA video and image processing algorithms and solutions
• Integrate existing IP Cores and develop custom IP as required.
• Review requirements; develop architecture and design details for FPGA & embedded processor implementations
• Support hardware bring-up and HW/FW Integration
• Establish hardware requirements for board design/layout involving FPGAs.
• Support concept to production H/W including requirements analysis, design, debug, test, and qualification
• Develop engineering design fixes, and coordinate solutions.
• Support concurrent engineering reviews and Trade Studies.
• Occasional overtime, and weekend hours may be required to complete critical tasks.

Qualifications:
• Required – able to obtain a security clearance.
• Extensive experience with Xilinx Vivado Development System required.
• Strong FPGA VHDL development experience including simulation.
• Experience with
o FPGA IP Core integration and FPGA embedded system design
o FPGA graphics and video processing implementations.
o Xilinx Zynq Ultrascale+ MPSoC or similar FPGA SoC architectures, including PS-PL interfacing
o Xilinx AXI4 Streaming Interface
o Analog and digital video/graphics interfaces
o RS-170, S-Video, DVI/HDMI, LVDS, DisplayPort, SDI, HD-SDI, 3G/6G-SDI, etc.
o FPGA I/O Industry Standard interface protocol implementations
o PCIe, Gbe, CAN, USB, DDR3, I2C, SPI, RS-232/422, etc.
• Prefer Xilinx SDK, Vivado & Mentor Graphics Modelsim experience.
• Familiar with Military Standards and Test Requirements.
• Able to use engineering development and test tools.
• Strong multi-tasking, interpersonal skills; able work with interdisciplinary teams.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Electrical Engineering and 10+ years’ experience.
• Other technical degrees will be considered with relevant experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7853
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Project Engineer

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Facilities Project Engineer
(U.S. Citizenship or Green Card Required*)
Cape Canaveral, FL
2019-7928

Responsibilities:
• Support implementation of the restoration of existing facilities and new facilities projects in support of Atlas V, Delta IV and future Vulcan Launch Operations at Cape Canaveral Air Force Station Florida.
• Build and track project schedules, write statements of work with the design engineers detailing contractor direction and support the development of proposal and project budgetary cost estimates.
• Participate in pre-bid walkdowns and construction kick off meetings.
• Help integrate and coordinate multiple contractor’s construction activities around launch processing activities. Work includes field progress and quality monitoring, construction problem resolution relating to design issues, existing conditions and schedule conflicts.
• Support the timely reviews of multiple types of contractor submittals.
• Lead recurring construction planning and status meetings.
• Track project costs and schedules progress recorded in a variety of databases.

Qualification:
• Knowledge of predominantly construction management techniques, technical writing, spreadsheet and database use, scheduling using MS Project and a sound practical knowledge of heavy industrial construction, industry principles, practices, and industry standards.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Project Management Institute certification in Project Management and a Bachelor’s degree from an accredited college in Engineering is preferred.
• 15+ years of relevant project engineering and construction management experience.
• Equivalent experience/combined education, with the 15+ years of professional experience, will be considered.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7928
Job Location: Cape Canaveral, FL
Rate: Based on experience
Duration: 12 Months
Input Date: 02/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Emma Ulrich
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Financial Analyst

Description:
Financial Analyst

Charlotte, NC
$34.17/hr
14 month contract
First Shift
*MUST BE A U.S. CITIZEN*
*NO RELOCATION COMPENSATION / NO PER DIEM SPLIT*

Description:
The Aftermarket organization is seeking an analyst to work within the Aftermarket Strategic Pricing team on a variety of business initiatives in support of our Aftermarket Maintenance, Repair, and Overhaul (MRO) sales pursuits. The analyst will work within the headquarters-based Aftermarket team (Strategic Pricing) and will be responsible for supporting the execution of strategic sales opportunities, conducting market segmentation and trending, and optimizing our value proposition. This includes the development of proposal pricing strategy, process optimization in order to support alignment across a broad matrixed organization, identification of process improvements, development and implementation of standard work inclusive of best practice identification. The successful candidate will ensure the Collins Aerospace value proposition is maximized and that proposals are delivered on-time to customer expectations. Additional responsibility includes supporting ACE (our standard operating system) and policy deployment initiatives as identified by management.

Required qualifications:
Bachelors degree
2+ years experience in analytical role(s)
Excellent analytical capability
Ability to manipulate multiple large data sets
Advanced Microsoft Excel, Access, and PowerPoint skills
Strong mathematical ability especially regarding financial modeling (margin calculation, breakeven analysis, CAGR, ratios, etc.)
Adept at problem solving
Strong communication skills
High level of attention to detail
Self-starter
Project management experience

Preferred qualifications:
Tableau proficiency SAP experience SQL knowledge Statistical modeling experience
 
Job Number: 10390
Job Location: Charlotte, NC
Rate: 34.17
Per Diem: No
Overtime: Possible
Duration: 14 months
Start Date: ASAP
Input Date: 02/01/2019
Last Updated: 02/21/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Firmware Design Engineer

Description:
Secret Security Clearance Preferred

Experience with Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets desired.
Experience with Xilinx and Altera Part family internal FPGA fabric and IP and model based compilers desired.
FPGA design experience with tools noted above. Previous experience related to aerospace design techniques is desired
 
Job Number: 45984
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 02/06/2019
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Flight Controls Engineer

Description:
PDS Tech is seeking a Flight Controls Engineer for an open position in Nagoya, Japan.

 
  •  
  • B.S. degree in Aerospace Engineering, Mechanical Engineering or related technical degree.
  • Applicable coursework or coop/intern experience to this position desired.
  • Working knowledge of generic CAD design tool processes is desired.
  • Experience with CATIA V6/Enovia – or ability to learn it quickly from V5
  • Experience with Kinematics in CATIA
  • Flight Controls Systems design experience a plus
  • Must have excellent verbal communication and presentation skills.
  • Proficient with Microsoft Office applications including Word and Excel.
  • Professional demeanor, troubleshooting and organizational skills are necessary.
  • International experience desirable. 
  • Must be able to stay in Japan a minimum of 3-5 years or until final certification.

 
Job Number: 1610045561
Job Location: Nagoya,
Duration: 36 months
Input Date: 08/09/2018
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000003BKTAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Sciences Engineer

Description:
We are seeking a Flight Sciences Engineers for an exciting new aircraft project here in Moses Lake, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants. They strive to create a high functioning, collaborative environment where team members can find opportunities for professional growth and innovation.





Roles
•Define and validate flight test specifications

•Perform data review and analysis for verification of aircraft level requirements

•Utilize flight simulation models and data

•Support ground and flight test activities

•Prepare flight test reports



Requirements
•Experience with FAA Part 25 or Part 23 aircraft certification

•Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.

•Ability to represent the client professionally and positively during client interactions and meetings.

•Bachelor or advanced degree in Aerospace Engineering.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2018
Last Updated: 02/05/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Adnan Salaka
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Software Test Developer / no clearance CA

Description:
163731 Flight Software Test Developer

Work Site Address: Pasadena CA
Job Number: 8830528
Max Pay Rate: 80.00 Negotiable

Start Date: ASAP
End Date: 6 Months
Position Type: Contract

Software developer to be a member of a Flight Software Test team that performs testing, integration, verification and validation of planetary mission flight software. The task is to perform software engineering activities associated with the testing of embedded flight software products for a large-scale project.

Job Description:
Work activities include, but are not limited to:
• Perform software requirements testing of assigned Flight Software (FSW) components using software-in-the-loop (SWIL) and hardware-in-the-loop (HWIL) test environments with FSW release candidates.
• Work with FSW developers and systems engineers to design/discuss test approaches that would satisfy system level and FSW component level requirements.
• Presenting test results to a panel of system engineers and FSW developers to report test verification results, statistics, problems, issues, etc…
• Developing testing software using scripting languages to implement the design test approaches for testing assigned FSW modules. Experience developing software that can be used for regression testing is a plus.
• Experience in black-box testing with a penchant for trying to find problems and issues in developed software
• Performing functional testing on the integrated build prior to delivery.
• Defining and designing functional test cases to verify FSW requirements, Avionics requirements, and Verification Items (VI) specified in the Functional Design Documents.
• Creating and maintaining test procedures and test scripts for the functional test cases.
• Executing functional test cases and maintaining test metrics and verification matrices.
• Collecting and maintaining all essential regression and functional test procedures and scripts.
• Performing Software-in-the-loop(SWIL) and Hardware-in-the-loop(HWIL) integration and testing
• Supporting FSW problem investigation.
Qualifications and Education Requirements
• Familiarity with principles, theories, concepts and techniques in developing, modifying, debugging, releasing and maintaining real-time and embedded software systems for mission-critical aerospace applications
• Recent experience with inter-process communication (IPC) mechanisms.
• Recent experience in performing testing in an integrated test/build environment
• Recent experience with debugging software/hardware interactions and possible failure modes
• Recent background in flight software testing with specific experience in the following languages and operating systems: Python (proficient), C/C++ and Linux

Preferred Skills
Strong verbal and written communication, presentation, and interpersonal skills
• Ability to work independently and in a team environment.
• Recent experience with device driver development and software interfaces for both custom and commercial hardware
 
Job Number: MB-R8830528
Job Location: Pasadena, CA
Rate: 80/hr max
Per Diem: no
Duration: 6 months
Input Date: 02/05/2019
Last Updated: 02/25/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Design Build Project Manager

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Flight Test Design Build Project Manager
(U.S. Citizenship Required*)
Tukwila, WA
2019-7945

Responsibilities:
• Maintain project schedule and status thru coordination with various engineering roles and sites.
• Facilitate and lead meetings to collect status, develop metrics on a weekly basis.
• Summarize and report cost and schedule performance on a weekly basis.

Qualification:
• Able to manage large volume of data at the macro and micro level desired.
• Strong MS Excel skills desired.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 2+ years’ related work experience, a Master’s degree and typically 1+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7945
Job Location: Tukwila, WA
Rate: Based on experience
Duration: 12 Months
Input Date: 02/08/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kay Lamar
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are seeking Flight Test Engineers to join us in Moses Lake, WA to support an exciting new aircraft project. The ideal candidate in this position will be involved in a range of airplane flight test operations including but not limited to:

•Support engineering with test plan creation.

•Discuss, write and review test cards and test hazard analysis

•Support and/or lead test preparation activities, test execution, post-test activities

•Support and/or lead pre and post flight briefings.

•Monitor live flight data, either via telemetry or onboard flight test aircraft

•Process, analyze, and draw conclusions from post flight data.

•Make assessments to ensure safety of flight determination.

•Document flight test design problems for long term fix.

•Generate and review appropriate restrictions/ limitations documentation.

•Update monitoring screens for specific testing and/or restriction monitoring.






Requirements



•5+ years relevant work experience related to experimental flight test operations.

•Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.

•Strong ability to analyze results

•Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).

•Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.

•Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Start Date: ASAP
Input Date: 12/28/2018
Last Updated: 02/05/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

Flight Test Instrumentation Technician

Description:
Role Description
 
Summary
As part of a multicultural team, you will be responsible for manufacturing, assembling, and supporting testing of hardware for flight testing of aircraft. Working from engineering instructions, procedures and drawings with limited guidance, fabricate, install, check-out, calibrate, diagnose, and troubleshoot instrumentation data acquisition systems and sensors. This position will require planning, building and terminating various cable harnesses required in the instrumentation system and significant attention to detail to support safe testing.
 
 
Responsibilities
  • Assembly of components to aerospace standards working from blueprints, engineering orders, schematics, repair manuals and other technical documents
  • Termination and installation of wire harnesses and tubing
  • Work with engineers to review design concepts and provide feedback for ease of assembly
  • Review, edit and follow work instructions for installation tasks
  • Plan, communicate and execute installation steps for complex mechanical installations
  • Work safely in aircraft environment


Qualifications
  • Associates or 2 year technical degree along with a minimum of 1 year of flight test operations experience
  •  
  • A minimum of 5 years’ experience in flight test operations in lieu of the degree
  • Excellent demonstrated verbal and written communication skills
  • Ability to defuse and resolve conflict among other team members
  • Ability to use standard mechanical tools and fabrication shop equipment
  • Must be capable and comfortable working within a diverse team environment

 
Desired

  • A&P license or equivalent experience
  • Experience operating heavy lifting equipment such as cranes and forklifts
  • Experience with measurement tools
  • Familiarity with tube fabrication (bend, flare, fittings, etc.)
  • Ability to perform strain gage installations
  • Knowledge in the use of 3D CAD tools, and the ability to read mechanical drawings and electrical diagrams.

 
Job Number: 1810094286
Job Location: Moses Lake, WA
Duration: 12 months
Input Date: 10/16/2018
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002qwKqQAI&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Handling Qualities and Control Law Lead Engineer

Description:
Handling Qualities and Control Law Lead Engineer
Location: Fort Worth, TX (76118)
12-18 Months

Tasks/Requirements:
- Creating analytical and simulation models of the designs
- Aircraft Stability and Control Design and Analysis
- Conducting wind tunnel tests, reducing data, and incorporating results into simulation math model
- Developing aircraft Control Laws and integrating these into flight simulation programs
- Linear and non-linear analysis of flight control systems
- Analyzing the aircraft handling qualities and comparing results to aircraft requirements and specifications
- Conducting aircraft flight tests of model and full-scale designs
- Interface with other functions and management on the program

Familiarity with the following is preferred:
· Wind tunnel testing
. 6 degree of freedom simulation models
. Model-based systems engineering
· MathWorks MATLAB / Simulink with Stateflow and Embedded Coder
· ADS-33 and other Handling Qualities specifications
. Aircraft Parameter Identification
. Control Law Optimization
· Aircraft flight test
· Experience with Enovia, DOORS, and Serena Dimensions
· Flight control system development and testing in a systems integration lab
· 14 CFR Part 27 and Part 29 for commercial rotorcraft certification



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54731
Job Location: Fort Worth, TX
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 01/04/2019
Last Updated: 03/13/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

Hydraulic Systems Specialist

Description:
PDS Tech is seeking a Hydraulic Systems Specialist for the Flight Control System Design Group, Regional Jet Development Project.

This position is located in Nagoya, Japan.  You may be requested to relocate to Seattle or Moses Lake (Washington State, USA) where aircraft flight testing is performed. It may also be requested to travel to systems supplier sites to manage the Hydraulics Gear technical contract.

SUMMARY of Responsibility
* Leading the development and finalization of the airplane’s design, being compliant to all applicable requirements,
* Responsible for leading activities of the Hydraulics System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain the approval of any task assigned contributing to the aircraft Landing Gear System,
* Work as a team member in a multi-cultural and international working environment in Japan Headquarters. Japanese Language skill is not required.
 
Responsibilities include but are not limited to:
(1) Develop and finalize the company’s airplane’s design, compliant to all applicable Landing Gear Structural and Mechanical System Requirements,
This activity includes;
(a) Evaluate the current aircraft design, with respect to compliance to the Landing Gear related airworthiness regulations of JCAB, FAA and EASA,
(b) Coordinate integration of design change activities originated from Landing Gear requirements when required,
(c) Present and Discuss the Hydraulic System compliance with the Transport Authorities,
(d) Lead verification and showing-compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections, Analysis, etc.,
(2) Initiate/review related documents, technical calculation, interface discussion with the team members and all the other stakeholders including systems, structures, manufacturing, customer support, and partners.
(3) Manage the technical contract requirements with applicable Hydraulic System suppliers and other interfacing suppliers as appropriate,
(4) Provide expertize to assist in resolving the Hydraulic System performance during any rig testing or Flight testing,
 (5) Performs other duties as may be assigned.
 


Educational Requirements:
* BS Degree in Engineering; Mechanical or Aerospace/Avionics preferred  
Professional Requirements:
* 4 years of testing experience in Environmental or Mechanical (i.e., hydraulic, flow, static load, and dynamic/shock/vibration)
* Experience with developing project time estimates, costing and quoting
* Design/Fabrication experience with test setups
* Landing Gear Structural and Mechanical design experience is preferred
* A strong working knowledge of Military, Aerospace, Telecom, and Commercial Specifications is highly desired.
Other Requirements:
* Must have excellent written and verbal communication skills in English
* Knowledge of customer service principles, techniques, systems and standards
* Needs the ability to develop, plan and implement short and long term goal.
* Ability to foster a cooperative work environment
 
Job Number: 1710076138
Job Location: Nagoya,
Duration: 12 months
Input Date: 04/06/2018
Last Updated: 08/23/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Chad Dunavant
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000023MntAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
IT Project Management Specialist 2

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

IT Project Management Specialist 2
(U.S. Citizenship or Green Card Required*)
Centennial, CO
2019-7826

Join our IT Project Management Office (PMO) and Vendor Management Office (VMO) as a Project/Business Management Specialist to assist with the daily operations and provides general administrative support.

Responsibilities:
• Participate and assist in the preparation of the annual IT business plan and budget
• Coordinate contract management efforts, such as the development of requests for proposals (RFP), and support the development and final execution of contracts.
• Maintain annual expense budgets utilizing proper accounting/budgeting controls, and provide regular and ad-hoc financial status reports.
• Review contract invoices, identify disparities and resolve basic issues with the vendors.
• Design, implement, evaluate and audit project management processes and templates for the project management office (PMO).
• Compile metrics relating to IT project success, project attributes, and individual productivity and adherence to defined processes.
• Educate and assist project managers & project leaders with implementing and improving project management processes.
• Provide administrative support to project managers and project leaders.
• Ensure project control systems are in place and integrate project data for decision makers.
• Organize and publish project-related documentation in various sources.
• May track costs and performance, service levels and other metrics required to ensure project goals and objectives are met.

Qualification:
• Knowledge of project management tools, methods and best practices such as those defined by the Project Management Body of Knowledge (PMBOK).
• Experience in IT financial management (budgeting, estimate to actuals tracking and analysis).
• Proficiency with Microsoft Office, especially Excel. Experience with Project and Visio.
• Able to function, somewhat independently, under general direction of senior level professionals
• Nice to have would be understanding of CapEx/OpEx and business case development.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s Degree in Computer Science, Information Systems, Business Administration or other related field. Or equivalent work experience.
• 3-5 years of relevant IT and business work experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7826
Job Location: Centennial, CO
Rate: Based on experience
Duration: 6 Months
Input Date: 01/30/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kay Lamar
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instructional Systems Designer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Instructional Systems Designer 4
(U.S. Citizenship Required*)
Seattle, WA
2019-7816


Responsibilities:
• Design high priority / high complexity learning solutions.
• Design, write and/or edit content for a variety of learning solutions (video, WBT, ILT, and more) using tools such as Xyleme, Degreed/Blackboard, Learning Guide Manager, Storyline, Captivate, Camtasia, and others.
• Work with Learning Experience Designers (LEDs) and Developers to integrate learning solutions prior to implementation.
• Work with Learning Program Managers (LPMs), LEDs, Developers, and customers to pilot learning solutions.
• Work with LEDs and developers to ensure handoff to LPMs / Operations allows for seamless transfer from development to release.
• Provide project status data to stakeholders as needed (important when supporting large initiative work that spans multiple org spaces).
• Conduct final Content Sensitivity Checks (CSC) as needed. All employees are responsible for this. This piece is embedded in front end work with SME/during kick off. (Includes but isn’t limited to ITAR / Proprietary / etc.)
• May travel for face to face communication with SMEs in Everett, Seattle, and Renton.

Qualification:
• Graphic design skills may be needed
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 10+ years’ related work experience, a Master’s degree and typically 8+ years’ related work experience or an equivalent combination of education and experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7816
Job Location: Seattle, WA
Rate: Based on experience
Duration: 9 Months
Input Date: 01/29/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Emma Ulrich
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instructor – Maintenance Training

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Instructor – Maintenance Training
(U.S. Citizenship Required*)
Greenville, SC
2019-7914

Responsibilities:
• Establish and direct a training system and/or conducts classroom and practical instruction to provide technical knowledge for the safe maintenance, repair, and operation of aircraft, aircraft systems, ground equipment, tools, test equipment, stores and facilities, according to established procedures.
• Write, edit, and produce materials for technical instruction.
• Provide assistance and support to all divisions in helping them determine their training needs and develop and conduct their maintenance training programs.
• Establish and direct maintenance of company-wide training programs and qualification record system.
• Maintain currency in technical developments, technical training, and audiovisual techniques including the maintenance of company aircraft instruction manuals.
• May analyze current operating problems and future operating requirements to identify training needs and develop training programs.

Qualification:
• Must have electrical experience working on fighter aircraft preferably (F-16).
• Must be familiar with aviation soldering and electrical wire routing.
• Must be capable of standing for more than two hours
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• High school diploma or GED required
• 8+ years of avionics/electrical fighter experienced is required.
• 2+ years of instructor experience is required.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7914
Job Location: Greenville, SC
Rate: Based on experience
Duration: 36 Months
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jarrett Lee
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Group Leader

Description:
We are seeking a Interior Group Leader to lead a team of 50+ Interiors Engineers and Certification specialist to navigate through the Design, Test and Certification process for and exciting new aircraft project here in Seattle, WA. Business trips to required sites may be requested, including Nagoya, Japan and Moses Lake where engineering tasks.


Responsibilities:
•The employee will work as the Group Leader for the Interior Team within the Interiors Office in Seattle. Leadership activities include, but not limited to:

•Lead a team of 50+ Interiors Engineers and Certification specialist to navigate through the Design, Test and Certification process for aircraft.

•Promote and ensure personnel performance from the Seattle Office, while influencing the Nagoya Team performance where practical.

•Manage team objectives and Goal setting, and adopt and support company Performance Measurement tools when available.

•Promote and ensure team integration in Seattle office and with other IPT’s.

•Drive and promote Integration activities between Nagoya and Seattle teams.

•Remove roadblocks and provide solutions to both technical and managerial challenges.

•Ensure processes are followed. Champion tool and process improvements to increase team efficiency where necessary.

•Support task prioritization and achieving deliverables. Provide adequate distribution of workload to ensure projects are completed timely.

•Communicate and Escalate to Seattle/Nagoya Leadership as appropriate.

•Balance and Identify Resource gaps to enable on time delivery of aircraft deliverable’s. Support and drive resource gap closure.

•Support reporting key metrics to management and Program Managers to ensure correct visibility is given to key issue

•Provide Technical direction to the team to enable development and finalize T/C design, compliant to all applicable requirements. This activity includes, but not limited to:

•Evaluating the current aircraft design, with respect to compliance to the Interiors commodities and related airworthiness regulations of JCAB, FAA and EASA.

•Conduct design review of interior components,

•Coordinate with system suppliers for the design, certification, and development schedule.

•Create and/or review qualification test plans for interiors commodities.

•Review certification plan for Interiors commodities,

•Managing schedule of design and certification activities for Interior commodities, with related personnel.



Requirements
•Minimum 15 years Engineering Experience with at least 10 years in the Aerospace/Aircraft industry, with a high preference for Commercial Aircraft Cabin Interiors.

•Equipment Qualification and Cabin Certification experience is mandatory.

•Demonstrated people leadership experience, managing teams of 50+. Ability for focus on key deliverables and find solutions to problems, and while guiding the team forward.

•Must be culturally sensitive, with preference of previous working experience within a Japanese working environment.

•Experience managing Aerospace Supply Chains under pressure and hitting tight deadlines, with exposure to commercial negotiations and contracts preferred.

•Must be flexible with working hours to support Japanese working time zone.

•Ability to work and reside full time in Seattle, USA mandatory.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 12/28/2018
Last Updated: 02/05/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interiors Project Engineer

Description:
We are seeking a Interiors Project Engineer for an exciting new aircraft project here in Seattle, WA. The Project Engineer will work and support activities within the Cabin Safety Interior System. This will include interfacing with all other aircraft functions and engineering teams to coordinate and obtain Information of any task assigned contributing to the aircraft and Interior System development and Certification.

•Establish and track KPIs that highlight bottlenecks.

•Identify performance concerns against a plan.

•Maintain risks & opportunity register on Sharepoint.

•Resource plan monitoring loading.

•Provide support to PM /GL tasks as necessary.

•Support Microsoft Project updates and weekly reports.

•Preparation of material and facilities for engineering meetings.

•Governance reporting work for PMO/EMO, daily/ weekly/monthly.

•Chase stakeholders and hold accountable for information’s provided.

•Keep JCAB test schedule topical for CMO before submission.

•Prep IPT PM reviews.

•Support budget planning and tracking.

•The primary work locations will be in either Seattle, WA or Nagoya, Japan. However, engineers maybe requested to travel to support business needs as requested.



Requirements
•+5 years of aerospace project experience, with aircraft interiors knowledge preferred.

•Fluent in English, with Japanese language skills desirable.

•Good computer skills (MS Word, Excel, Power Point, Microsoft Project).

•Attention to detail and organized.

•Ability to interact respectfully with others.
 
Job Location: Seattle, WA
Start Date: ASAP
Input Date: 12/28/2018
Last Updated: 02/05/2019
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
International Trade Compliance Site Support

Description:
International Trade Compliance Site Support

Location: Fort Worth, TX
Pay Rate: $48.27/hr
Duration: 12 month W2 contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Position Responsibilities:
•Provide guidance to site functional teams regarding visitor management, technology marking, technology transmission methods, reporting and other administrative requirements for export compliance.
•Administration of the visitor management system to include, visitor approvals, adherence to visitor policies and procedures, follow-up on required host training, and screening of visitors as needed.
•Assist site in compliant transfers of technical data by assigning jurisdiction & classification and providing guidance on export markings and approved transfer methods
•Support site logistics by creating Automated Export System (AES) Filings and Delivery without reference documents for hardware in SAP
•Coordinate site input to support C360 Management Reports

*Education / Certifications
Bachelor Degree required
*Experience / Qualifications
Required:
•1-3 years of experience in US Export and Customs laws and regulations
•Knowledge of ITAR (Intl Traffic and Arms Regulations)
•Knowledge of Export Administration Regulations (EAR)
•Proficient in Microsoft Office, Word, Excel, and PowerPoint

Preferred:
•Licensed Customs Broker
•Experience in the Technology/Software related to the Aerospace industry, a plus.
 
Job Number: 9985
Job Location: Fort Worth, TX
Rate: 48.27
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 10/18/2018
Last Updated: 02/21/2019
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 01/03/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lean Manufacturing Expert - Aerospace - China

Description:
Leading Chinese aerospace organisation are seeking Lean Manufacturing Expert to work within their modern aircraft manufacturing facility to be responsible for the planning and implementing a lean manufacturing & improvement plan. Responsibilities include:

Planning, implementation, monitoring, improvement of the company's lean manufacturing overall plan.
Lean improvement of production site, optimization of production process, coordination of various production lines and functional departments, and realization of lean strategy for cost reduction and efficiency;
Cultivate and train the company's lean manufacturing team.
You will have implemented lean manufacturing strategies within the aerospace industry taking responsibility for large projects, ideally within aircraft manufacture, with an understanding of the latest intelligent manufacturing methods. You will be degree qualified (or above) and preferably be Six Sigma qualified, ideally certified Black Belt.


The position is based in Shanghai and will be an initial 2-3 year fixed-term employment contract comprising an attractive basic salary with generous allowances for accommodation, local transport, home leave and medical cover available.
 
Job Number: JO0000000209
Job Location: China
Rate: Negotiable
Duration: 2-3 years
Start Date: April 2019 onwards
Input Date: 01/29/2019
Firm Name: STRONGFIELD TECHNOLOGIES USA INC
Attention: Adrian Medhurst
Address: 5000 BIRCH ST STE 3000
City, State: NEWPORT BEACH, CA 92660
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Loads & Dynamics Engineer

Description:
Loads and Dynamics Engineer
• Support loads event simulation model development and validation of loads criteria for suborbital space missions
• Support pre-flight preparation including review of test limitations, flight test plans and procedures, flight readiness reviews, mission control room support, and post flight analysis
• Works with other engineering groups to ensure proper application of design and loads requirements
• Develop airframe design loads, component loads, fatigue spectra, and environmental specification
• Supports entry into commercial service by ensuring that regulatory and internal company requirements related to loads are met
• Develop standardized analysis and reporting tools
• Perform model updates from data collected during vehicle or component testing and data created with analytical tools
• Develop and maintain loads databases for use in analysis of WK2 and SS2 during all flight phases
• Develop and substantiate rational loads criteria and requirements for unique vehicles with unconventional configurations
• Graduate degree in Aerospace Engineering, and/or equivalent, with minimum of 5 years of experience in external loads and dynamics development
• Experiences in wind-tunnel and flight test aerodynamic and loads model validation
• Experience with full aircraft analysis – transonic required, supersonic and launch vehicle desirable
• Test plan development and data analysis experience a strong plus
• Experience in the conduct of flight test, including familiarity with standard flight test practices and safety processes strong plus.
• Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
• Advanced skills with Simulink, MATLAB, Fortran, C, C++, and software development best practices.
• CATIA V5 and NASTRAN experiences preferred.

The Structures Company is an AA/EOE.
 
Job Number: 260
Job Location: CA
Rate: DOE
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 05/21/2019
Last Updated: 07/03/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MANUFACTURING PROCESS ENGINEERS

Description:
Johnson Service Group (JSG) has teamed up with a leader in the aerospace, defense and commercial markets.
Our client is seeking talented Manufacturing / Process Engineers to provide manufacturing expertise to solve complex challenges, and to implement process and product improvements.

Scope of Experience and Responsibilities:

2-5 years+ of experience in an electro-mechanical assembly, test, or machine shop (CNC/NC) environment.
Experience in the commercial, aerospace, and/or military industry.
Background in E/M or hydraulic actuation systems is a plus but not required.
Controls engineering experience is a plus.
Strong knowledge of PFMEA, Six Sigma and Lean Manufacturing.
Must have participated in MRB material (NCR processing).
Provide technical solutions to address manufacturing issues
Support new capital equipment purchases and manufacturing implementation
Participate in process improvements on a project level.
Support manufacturing with implementing complex engineering improvements and solutions.
Adhere to Quality System requirements and support process audits.
Initiate and support Process Flow Charts, PFMEA, and Control Plans.
Experience with Project Planning tools, such as MS Project, is a plus.
Strong troubleshooting and problem-solving skills.
Excellent verbal and written communication skills are required.
Education/Training:

Bachelor of Science Degree in an Engineering, Aerospace or a related technical discipline is required
Six Sigma Green Belt is a plus
Start Date: As soon as possible

Duration: 3-6+ month contract position

Location: Ft. Collins, CA
 
Job Number: 368123
Job Location: FORT COLLINS, CO.
Per Diem: If qualified
Overtime: Possible
Duration: 3-6+ months
Start Date: ASAP
Input Date: 08/24/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

MP&P Engineer 3 - MO

Description:
Chipton-Ross is seeking a MP&P Engineer 3 located in Berkeley, MO & San Antonio, TX.

RESPONSIBILITIES:
Need a Material & Process Engineer to support to the F/A-18 program and other programs in San Antonio. This position will troubleshoot critical, time sensitive production issues and recommend long-term solutions to prevent re-occurrence. You must be able to collaborate with engineers across multiple sites, make decisions, and develop consensus to implement your recommendations. You must have demonstrated technical ability to solve complex problems at their root and under schedule pressure, and the corresponding leadership experience to implement solutions.

REQUIRED EXPERIENCE:
Existing M&P experience on F/A-18 or other aerospace program is required. Experience in paints, coatings and corrosion protection is desired but not required.

EDUCATION:
Accredited Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.

FULL TIME/FIRST SHIFT
WORK HOURS: 7:30 AM - 4:00 PM

TRAVEL: YES
After that, travel will be around 10% of the time and applicants must be able to travel to international locations to support F/A-18 aircraft deployed around the world.

MISCELLANEOUS:
This position will spend the first 6 months in St. Louis, MO and then be located in San Antonio for the remainder.
 
Job Number: 175872
Job Location: Berkeley, MO
Rate: $DOE
Duration: 12 Months
Input Date: 12/18/2018
Last Updated: 08/23/2019
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: mmullins@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of products and services

Unique Skills
• Bachelor’s Degree in aerospace or mechanical engineering.
• Minimum 10 years dedicated structures MRB Engineering experience at a recognized airframe manufacturer
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non-pressurized metallic and non-metallic structures (fuselage, wing, and empennage).
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as Catia V5, SmarTeam, Word, Excel)

Experience/Education
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in the specific technical discipline or 15 yrs broad engineering experience in several technical disciplines with Bachelors, or 8 yrs in the specific technical discipline with Masters, or 6 yrs in the specific technical discipline with PhD.
 
Job Number: 24-320
Job Location: Savannah, GA
Rate: $64 - $68
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 02/01/2019
Last Updated: 03/18/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Seeking an experienced, highly motivated Material Review Board (MRB) Engineer. The primary task of this person will be to review manufacturing non-conformances and establish appropriate dispositions for these parts and assemblies. Competency in first order design and analysis principles is a must. Ability to utilize CATIA V5 is desired. Experience with various composite material systems is desired.

Qualifications:
• Knowledge of air vehicle systems, systems integration, engineering design, the drawing release process, and subsystems/component qualification
• Working knowledge and experience integrating various mechanical systems into a composite aircraft.
• Familiarity with composite fabrication processes
• Review and provide engineering technical disposition of non-conformance notifications related to metallic and composite parts/assemblies
• Skilled in “equivalent strength” principles
• Participation in product Corrective Action Board (CAR) reviews


Requirements
• B.S. degree in Mechanical, Aerospace, or similar engineering discipline is required
• At least 5 years of relevant industry experience
• Experience with CATIA V5 strongly preferred. SOLIDWORKS or equivalent will be considered in lieu of CATIA.
• Experienced design (broad based aircraft experience) with knowledge of design manufacturing tolerances for production of components using GD&T
• Experience with Product Lifecycle Management tools (PLM software), Requirements management tools and configuration management
• Excellent verbal and written communication, excellent computer skills including Microsoft Word, Excel, PowerPoint, and Matlab
• Knowledge and experience with AS9100 a plus
• Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, DO-160, military (MIL-STD-810) or NASA are highly desired
• Experience with manufacturing based ERP systems a plus
• Strong team player and ability to work independently with excellent organizational and problem-solving skills
• Composite and metal design experience preferred
• Understanding of MRB requirements & procedures
• Extensive working knowledge of engineering drawings / requirements
• NDT/Visual non-conformance disposition expertise
• Experience with control & segregation requirements for non-conforming material
• Familiarization with records accuracy & completeness (including data codes)
• Ability to facilitate inadequate cause & corrective action resolutions
• Familiarization with rework vs accept disposition risk assessments
• Familiarization with final dispositions & re-submit codes
• Experience should include creation of engineering dispositions for non-conformances for pressurized and non
• pressurized metallic and non-metallic structures (fuselage, wing, empennage)
• Experience should be in a production and/or schedule-driven environment
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment
• Strong written/verbal communication and interpersonal skills
• Typically a 9-10 hour work day, with some scheduled weekend support required

The Structures Company is an AA/EOE.
 
Job Number: 263
Job Location: CA
Rate: Up to $65/Hr. **DOE**
Per Diem: Yes
Duration: 9+ Months
Start Date: ASAP
Input Date: 03/18/2019
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

MRB Engineer (9 positions left, Tulsa, OK)

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Experience/Education
• Bachelor’s degree in aerospace or mechanical engineering.

Unique skills/Experience
• Minimum 7 years dedicated structures MRB Engineering experience at a recognized aerospace manufacturer.
• Experience should include creation and justification of engineering dispositions for nonconformances of composite and metallic, pressurized and non-pressurized aircraft structures.
• Composite experience should include fiberglass, carbon/epoxy, laminate/sandwich assemblies.
• Familiarity with results of composite NDI/NDT methods required.
• Experience should be in a Production and/or schedule-driven environment.
• Capability to analyze and rapidly design repairs based on equivalent strength/stiffness of surrounding structure while in a schedule driven environment.
• Strong written/verbal communication and interpersonal skills.
• Must be computer literate (such as, but not limited to: Catia V5, SAP, Solumina, Smarteam, Word, Excel)
• Typically a 40 hr work week, with some week/weekend OT a possibility.

Essential Functions
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Acts as liaison with representatives outside of the assigned group/area

aircraft aerospace
 
Job Number: 24-303
Job Location: Tulsa, OK
Rate: $64-$67
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 08/23/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Email: matt@precisionpersonnel.com
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574

Description:
Machine & Tool Designer I ( Clearfield, Utah ) S8752572 & S8752574
12 Month Contract

Pay Rate: $55-60/hr maybe more for the right candidate

**Active DoD Secret Clearance required

Tool Engineer to work in a composite aircraft and rocket motor fabrication environment.
Responsibilities:
• Project manages internal and external engineering personnel resources to provide production quality rocket motor and aircraft tooling in support of development programs
• Concepts and designs special tooling within an Integrated Product Team structure
• Manages tooling technical, quality and schedule
• Uses and/or manages Computer Aided Design (CAD) resources for tooling design
• Works with vendors to ensure successful fabrication of tooling
• Witnesses source inspection of special tooling at fabrication locations
• Proofs tooling upon receipt
• Maintains tooling documentation related to design, fabrication and proofing
• Provides tooling estimates for new tools
Education and Experience Requirements:
BS/MS in Mechanical, Aerospace or Civil Engineering, or related field plus a minimum of 2 years experience with BS or 0 years experience with MS in engineering. Preference given to candidates with experience in an aerospace manufacturing environment.
Screening Criteria
• DoD Secret Clearance required
• Design experience using 3D CAD systems (CATIA V5, NX) preferred
• NX experience preferred over CATIA V5
• Closed form and/or FEA stress analytical capability preferred
• Experience with project management including budget, schedule and technical
• Experience with design, fabrication and installation of tooling for rocket motor and/or aircraft composite parts and assemblies
• Experience with general metallic fabrication including welding, machining, and forming.
 
Job Number: S8752572
Job Location: Clearfield, UT
Rate: open
Per Diem: no
Overtime: yes
Duration: 12 months
Start Date: ASAP
Input Date: 02/07/2019
Last Updated: 02/20/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist - Lathes - 2nd Shift - Aerospace - Everett, WA

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist - Lathes - 2nd shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical college or equivalent experience in industry.

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist Millturn - 2nd Shift - Aerospace - Everett, WA area

Description:
Keltia Design, Inc is a technical support services company supplying technical personnel, training, and CAD design services to customers in the Aerospace industry on a permanent and contractual basis. We have been in business since 2000.

We have a client in the Everett, WA area (NOT Boeing) currently seeking several machinists to join their aircraft component manufacturing team.

Machinist Millturn - 2nd Shift - Everett, WA
Summary Description: Sets up and operates computer numerical control (CNC) machines, machining centers, or manual machines to fabricate metallic parts.

Job Duties and Responsibilities:
•Studies blueprints, sketches, drawings, manuals, specifications, or sample parts to determine dimensions and tolerances of finished work piece, sequence of operations, and setup requirements.
•Measures, marks, and scribes dimensions and reference points on material or work pieces as guides for subsequent machining.
•Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, and jig borers.
•Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media.
•Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required.
•Verifies conformance of finished work piece to specifications.
•Sets up and operates machine on trial run (prove-out), when afforded, to verify accuracy of machine settings or programmed control data.
•Documents all information pertaining to the setup and operation of each job assigned. This is accomplished with sketches, photos, and written descriptions, and includes the responsibility to keep this documentation neat, easy to read and up to date.
•Confers with Manufacturing Engineering, Programmers, Planners, and other personnel to resolve machining or assembly problems.
•Takes responsibility for maintaining good housekeeping practices with assigned machines and immediate work areas.
•Applies good technical practices to care for and prevent damage to machining and measuring equipment.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise impacting expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, work orders, specifications, aerospace blueprints and drawings, and procedure manuals.
•Ability to communicate effectively with managers or employees.
•Ability to carry out instructions furnished in written, oral, or diagram form.
•Ability to define problems, collect data, establish facts, and draw valid conclusions.
•Ability to use basic hand tools including precision measuring equipment.
•Must be able to sit or stand for at least 10 hours a day.
•Ability to frequently lift and/or move up to 25 pounds, and occasionally lift and/or move more than 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦Associate’s degree (A.A.) or equivalent from a two-year college or technical school, OR INDUSTRY EXPERIENCE

Here are the possible Benefits with this Client
Medical, dental, vision, long term disability and life insurance benefits
PTO/ Holiday pay - Eligible upon hire
401(k) plan with Company matching
 
Job Number: KD01-1415
Job Location: Everett, WA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Becky
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Maintenance Engineer

Description:
Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

Maintenance Engineer
(U.S. Citizenship Required*)
Sterling Heights, MI
2019-7899

Responsibilities:
• Perform supportability analysis and maintenance task analysis.
• Review drawings, Change Requests (CR), Engineering Change Proposals (ECP), computer models and other technical documentation to identify maintenance and supply support requirements for the design.
• Support the development, maintenance and update of requirements database in accordance with GEIA-STD-0007, MIL-STD-1388-2B, and SLIC/SLICWAVE.
• Develop Maintenance Engineering source data to be used in the creation of Field Maintenance Technical Manuals, National Maintenance Work Requests (NMWR), and other publications.
• Assess emerging designs for requirements compliance and recommend design alternatives to enhance supportability and maintainability.
• Conduct detailed tasks analysis as part of the Logistic Support Analysis (LSA) process to identify resources required to maintain and support the design.
• Document results of the detailed task analysis in the Logistic Support Analysis Record (LSAR) database.
• Translate engineering & other technical information into source data in support of ILS products development.
• 10% travel

Qualifications:
• Hands on experience in the maintenance of ground combat vehicles a plus.
• Familiar with MIL-STD-1388-2B and GEIA-STD-0007 a plus.
• Experience with LSA/LSAR and SLIC/SLICWARE a plus.
• Demonstrated knowledge of Special Tools and Test Equipment (STTE) a plus.
• Working knowledge of U.S. Army logistics support structure, policies, and procedures a plus.
• Excellent interpersonal and communications (oral and written) skills required.
• Motivation to work independently with minimal supervision.
• Personal computer skills, familiarity with CAD models (PRO-E/Product View), and proficiency with MS Office applications.
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• 2+ years applicable experience with a Bachelor Degree in an Engineering discipline; other degree disciplines will be considered with relevant applicable experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunities to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7899
Job Location: Sterling Heights, MI
Rate: Based on experience
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jeremy Israel
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer (2 needed, Retrofit)

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment

Unique Skills:
Solumina and SAP experience preferred

Principal Duties And Responsibilities:
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing.
• Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer.
• Author DRDI/DMT rework instructions to support effective corrective actions.
• Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process.
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements.
• Participate in Design for Manufacturing assessments with Engineering.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• With minimal supervision, lead/coordinate the implementation of projects between multiple organizations.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.

Other Requirements:
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

Experience/Education:
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

aircraft aerospace
 
Job Number: 24-307
Job Location: Savannah, GA
Rate: $52.50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 01/21/2019
Last Updated: 03/05/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer 4

Description:
Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services. Solving complex challenges and delivering innovative solutions to help customers keep people safe and provide them essential services, our client is hiring for the following critical need:

Manufacturing Engineer 4
(U.S. Citizenship Required*)
Fort Worth, TX
2019-7809


Responsibilities:
• Design manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.
• Design arrangement of machines within plant facilities to ensure most efficient and productive layout.
• Design sequence of operations; specify procedures to fabricate tool & equipment and for other functions that affect product performance.
• Adapt machine or equipment design to factory and production conditions.
• Close coordination and collaboration with the Product Focus Teams, Factory Material Flow, Tool Services, and Facilities in developing and implementing production readiness in each of the component and assembly areas.
• May incorporate inspection and test requirements into the production plan.
• Inspect performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.
• Develop manufacturing processes to apply to statistical process control, and may develop those techniques.
• Provide guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques.
• Ensure processes and procedures are in compliance with regulations.

Qualification:
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree and 16 years’ experience, or Master’s degree and 14 years’ experience

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.
Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7809
Job Location: Fort Worth, TX
Rate: Based on experience
Duration: 52 Weeks, 2 Days
Input Date: 01/29/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jarrett Lee
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I ( Gilbert, AZ ) TS8912546

Description:
Manufacturing Engineer I ( Gilbert, AZ ) TS8912546
6 Month Contract

Pay rate: Open, depending on experience

**Active Top Secret Clearance required

This Manufacturing Engineer is responsible for Mechanical Integration & Test support on flight mechanical subassemblies and spacecraft integration & test activities at NGC's Gilbert Az. campus. Operations are performed in a manufacturing production environment where I&T Mechanical Engineers coordinate and oversee mechanical build and production operations performed by the technical staff.

The Ideal candidate shall possess a Bachelor's degree in Mechanical Engineering plus 2+ years of related experience in the satellite/aerospace industry.
The candidate should be capable of interpreting complex engineering drawings, schematics, diagrams, and specifications, must possess good technical writing skills, display leadership skills, and possess excellent interpersonal skills and written communication ability. The candidate should have some experience in handling delicate components and should have a good working knowledge of manufacturing processes applicable to the manufacture of spaceflight hardware or equivalent.

The candidate must have the ability to support on time and on-budget product delivery by establishing and monitoring daily production goals, recognizing and reducing/eliminating non value operations, support lean principals for process improvements, and support performance metrics regarding quality, delivery, and cost.
Additionally, the candidate should be able to recognize, coordinate and/or support the resolution of anomalies and discrepancies (TF’s & NCR’s) and work with teammates (Engineering, QA, Management, Customers) towards prompt resolution.

Experience using MES is a plus and will be required for daily activities. This position may require off hour shift work, weekend work, and extended daily hours to meet production demands. Knowledge of basic 3D Modeling, Excel, Word, Powerpoint, and Tool Control helpful but not required. An understanding of ESD, FOD, and 5S processes desired. TipQA, Windchill, MES, Costpoint, and CREOView preferred.
 
Job Number: TS8912546
Job Location: Gilbert, AZ
Rate: open
Per Diem: no
Overtime: yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/29/2019
Last Updated: 05/12/2019
Firm Name: TALENTPRO CONSULTING
Attention: Tim
Address: 402 N B ST
City, State: FAIRFIELD, IA 52556
Phone: 641/209-3000 X201
Fax Phone: 641/209-3001
Website: www.talentproconsulting.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree required GA

Description:
164136
7801 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.
 
Job Number: JK-7801
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 03/25/2019
Last Updated: 04/01/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer Sr / Bachelors Degree Required GA

Description:
7847 Manufacturing Engineer Sr
Dublin GA
45/hr max

POSITION SUMMARY
Ensures maximum cost effectiveness and reliability of manufacturing processes and workflow. Determines the methods and sequences of manufacturing operations for moderately complex products and machine parts and assemblies; ensures that products and processes meet customer quality requirements. Provides productibility input and manufacturing plans for product design or modification.


ESSENTIAL FUNCTIONS
1. Evaluates moderately complex manufacturing processes by conducting process analysis, applying knowledge of product design, fabrication, assembly, tooling, and materials, conferring with suppliers, and soliciting observations from operators/production technicians.

2. Develops moderately complex manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; and conferring with equipment suppliers. Prepares written and graphical work instructions for the communication of manufacturing requirements to production personnel.

3. Refines and enhances products and processes by applying continuous improvement and key lean manufacturing/production principles and techniques to areas of production. May be assigned to special projects for a variety of products and processes.

4. Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout. Assures process control and reliability for assigned areas. Coordinates input and recommendations, and implements changes that may cross multiple teams or areas.

5. Assures product and process quality by designing testing methods, testing finished product and process capabilities, and establishing standards to confirm and validate manufacturing process requirements. Determines root cause of failure using statistical methods (e.g. design of experiment, statistical process control) that may result in changes in design, tolerances, or processing methods.

6. Provides manufacturing decision-making information by calculating production, labor standards, and material costs, reviewing production schedules, and estimating future requirements. May serve as liaison to supplier base.

7. Prepares product and process reports by collecting, analyzing, and summarizing information and trends. Presents findings and underlying rationale to team, supplier, or customer.

8. May maintain product and process database by writing computer programs, travelers, operation sheets, and entering data.

9. Maintains professional and technical knowledge by attending educational workshops, reviewing professional publications, establishing industry networks, benchmarking state-of-the-art practices, and/or participating in professional associations.

10. Complies with federal, state, and local legal requirements (e.g. environmental, safety, etc.) by studying existing and new legislation, ensuring adherence to requirements, and advising management on needed actions.

11. Shares specialized knowledge with others. Represents company on specific projects. Mentors new employees. Contributes to team effort by accomplishing related results as needed. Work assignments may include cross-functional (e.g. quality, design, or test engineering) or project team responsibilities.

Job Requirements: QUALIFICATIONS
Education and Experience
MUST have a Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience. Society of Manufacturing Engineering (SME) or Mechanical Engineering (ASME) certification desired.


Knowledge, Skills and Abilities

Knowledge of manufacturing and production engineering principles, concepts and general business operations. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT). Ability to use standard business applications software and/or specialized data analysis tools. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact. Ability to work within general work objectives regarding projects and team goals. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures. Ability to effectively communicate and present information to team members, team leaders, and top management. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.

TYPICAL MENTAL AND PHYSICAL DEMANDS

While performing the duties of this job, the employee is required to sit. The employee frequently is required to use hands to operate a computer and is required to talk or hear. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. The employee may be required to travel to vendors or customers including overnight trips.

1. Bachelors degree (BS) in Manufacturing Engineering or related engineering field. Demonstrated ability to perform the essential functions of the job typically acquired through two or more years of related experience.
2. Society of Mechanical Engineering certification desired.
3. Knowledge of manufacturing and production engineering principles, concepts and general business operations.
4. General knowledge of aerospace or similar industry products and legal and regulatory requirements related to manufacturing plants.
5. Ability to effectively apply continuous improvement methods to quality and manufacturing functions (e.g. pull systems, process mapping, JIT).
6. Ability to use standard business applications software and/or specialized data analysis tools.
7. Ability to work effectively with CAD/CAM systems or other computer aided manufacturing systems.
8. Ability to work on a variety of technical problems of moderate scope and complexity where analysis of the situation or data requires thorough identification of factors and analysis of impact.
9. Ability to work within general work objectives regarding projects and team goals.
10. Ability to read, analyze, and interpret engineering drawings, technical manuals and policies and recommend changes to procedures.
11. Ability to effectively communicate and present information to team members, team leaders, and top management.
12. Ability to respond to significant inquiries or complaints from customers, regulatory agencies, or members of the business community.
13. Ability to define problems, collect data, establish facts, and draw valid conclusions.
14. Ability to effectively demonstrate team member competencies and participate in goal-setting, performance feedback, and self-development activities.
 
Job Number: JK-7847
Job Location: Dublin, GA
Rate: 45/hr max
Per Diem: no
Duration: 12 months
Input Date: 02/06/2019
Last Updated: 02/19/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mastercam CNC Programmer

Description:
Minimum 5 years of Mastercam NC programming experience. Must have experience in 2017 or newer. Aerospace background and 4/5 axis programming is a plus.

Must be familiar with G Codes, X-Y-Z coordinates, and terminology (point, tangent, intersection, plane, etc.).

Must have basic understanding of machining processes (climb cutting, conventional cutting, etc.).

Must have milling experience and familiarity with 7XXX series aluminums, stainless steels and Titanium.

Must be familiar with computers and have basic computer skills.

Ability to read blueprints and have dealt with model based definition.
 
Job Location: St. Peters, MO
Rate: $40-$45
Per Diem: Split
Duration: 6 mos +
Start Date: ASAP
Input Date: 02/05/2019
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler - Aerospace - Everett, WA

Description:
Keltia Design Inc is a technical support services company providing CAD design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
We have been in business since 2000

We are working with a leading Aerospace Manufacturing client with multiple openings in the Everett WA and Kent WA Areas

Material Handler - 1st Shift
Summary Description: Prepares parts, assemblies, and other items for shipment, and receives, verifies, and records incoming materials.

Job Duties and Responsibilities:
•Wraps and packages completed parts and assemblies and boxes for shipment to customer.
•Performs part-marking per written work order instructions.
•Verifies quantities to be part-marked, packaged, and shipped and examines outgoing shipments to ensure shipments meet specifications.
•By using the company’s MRP system to verify deliveries, put parts on hand and create packing slips.
•Prepares and secures cartons, crates, pallets, and other containers for shipment of goods.
•Stamps, stencils, labels, or affixes identifying information and shipping instructions onto cartons, pallets, crates, or containers as required.
•Determines method of shipment and posts weights and shipping charges, and affixes postage as necessary.
•Compares identifying information and counts, weighs, or measures items of incoming and outgoing shipments to verify information against bills of lading, invoices, orders, or other records.
•Unpacks and examines incoming shipments, rejects damaged items, records shortages, and communicates with the buyer and/or shipper to reconcile damages and shortages. Routes items to the appropriate departments as required.
•Monitors and maintains appropriate inventory levels of shipping materials and supplies.
•Uses handtrucks, pallet jacks, forklifts, and material handling equipment to move shipments from shipping and receiving area to storage or work areas.
•Meets established standards for productivity and quality. Confers with supervisor when problems arise which impact expected level of performance.
•Responsible for supporting and ensuring compliance to ISO 9001/AS9100 Quality Management Systems.
•Must contribute to a positive work environment.
•Performs any task required to support customer requirements and company goals.

Abilities:
•Ability to read and interpret documents such as safety rules, operating and maintenance instructions, blueprints, and procedure manuals.
•Ability to add, subtract, multiply, and divide using whole numbers, common fractions, and decimals.
•Ability to carry out detailed but uninvolved written or oral instructions.
•The employee is frequently required to use hands to finger, handle, or feel, reach with hands and arms, and talk or listen.
•The employee is regularly required to sit, stand, walk, stoop, or crouch.
•The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.
•Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level Requirements:
•Minimum◦High school diploma or general education degree (GED) and six months or more related experience and/or training; or equivalent combination of education and experience.
 
Job Number: Keltia1016-1
Job Location: Everett, WA
Rate: DOE
Per Diem: N/A
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

Material Handler I

Description:
Chipton-Ross is seeking a Material Handler I for an opening in Redmond, WA.

RESPONSIBILITIES:
25% - Records information regarding materials received and shipped in the department computer system.
10% - Perform cycle counting activities (performing counts/recounts, researching lost items, completing cycle count records).
20% - Packaging and handling materials within company guidelines.
10% - Counting and/or weighing incoming parts to verify receipt.
25% - Performing picking/kitting activities 10% - Separating and moving materials, equipment and supplies to and from stores, warehouses, person, department, station and manufacturing areas.

REQUIRED EXPERIENCE:
1 year of related experience
Experience operating forklift, pallet jacks, and standard material handling equipment Experience with MS Office, Excel, outlook and using computer ERP/MRP system Ability to operate a 14ft box truck with lift gate A valid Washington State Driver's License Ability to move up to 50 lbs
BOX TRUCK
ERP
EXCEL
FORKLIFT
MATERIAL HANDLER
Additional Skills:
MATERIAL HANDLING
MATERIAL HANDLING EQUIPMENT
MRP
MS OFFICE
OUTLOOK
AEROSPACE
CONVEYOR
ENTERPRISE RESOURCE PLANNING
ESD
KITTING
MICROSOFT EXCEL
MICROSOFT OFFICE
MICROSOFT OUTLOOK
ORACLE
PACKAGING
SHIPPING

PREFERRED EXPERIENCE:
Experience handling ESD sensitive electronic parts Oracle ERP system Strong computer skills Experience handling explosives/energetics Excellent verbal and written communications skills Shipping/transportation experience Experience working in a regulated environment or previous aerospace experience

EDUCATION:
Accredited High School Diploma/GED

WORK HOURS:
9/80 , 6:00am to 3:30pm Shift
Full-Time

 
Job Number: 170803
Job Location: Redmond, WA
Rate: $DOE
Duration: 12 Months
Input Date: 05/07/2018
Last Updated: 08/23/2019
Firm Name: CHIPTON ROSS
Attention: Cody Reposa
Address: 343 MAIN ST
City, State: EL SEGUNDO, CA 90245
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: creposa@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials and Processes Engineer

Description:
• Build and Lead all parts of Materials and Processes organization for the aircraft development.
• Lead development of the material and process specifications through collaboration with OEM, suppliers and vendors to guide program in selecting appropriate materials by drawing from civil, military and/or industry standards.
• Strong knowledge of aerospace composites and metallic materials, advanced manufacturing processes, test methods and design allowable development.
• Knowledge of aircraft flammability and structural bonding requirements for Part 25 certification.
• Provide advice on the applications, properties and processing of advanced material systems to all stakeholders - including, but not limited to, stress, design, customer support, quality and procurement.
• Perform trade studies, write proposals and support new business development plans.

Requirements:
• Must be either a US citizen, a US permanent resident (a “US Person”) or a Canadian citizen.
• Minimum Bachelor’s Degree in Engineering. Master’s Degree strongly preferred.
• 15+ years of hands-on experience in advanced materials and processes qualifications, testing, manufacturing and certification of Part 25 aircraft
• 5+ years of experience leading technical resources and team.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Demonstrated success in dealing and influencing internal and external stakeholders.
• Experience in engineering support of aircraft production line activities is desirable.
 
Job Number: 42-014
Job Location: Reno, NV
Rate: DOE but very competitive
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 07/15/2019
Last Updated: 07/22/2019
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Seeking a Mechanical Design Engineer who would like to learn and contribute to the Design Process. This person needs to be interested in a permanent position in the Mechanical Design department in Space and Sea Systems.

The candidate will support engineering activities associated with the analysis, design, and structural testing of thermal control and environmental life support components and assemblies for various aerospace applications including the NASA’s Space Suit, NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms. This is both an individual contributor and mentorship level position.

The candidate will:
• Deliver against the cost, schedule and technical requirements of the program as defined by the Chief Engineer or IPT leadership in accordance with Standard Work. Deliverables include ensuring execution of Peer and Design reviews, analyses, Validation activities, Verification activities, design documentation (drawings, reports), task cost and schedule performance, etc.
• Develop and implement mechanical design best practices, processes and procedures within the Standard Work framework.
• Implement and support Standard Work processes across all programs to deliver consistent results.
• Work collaboratively with Engineering, Programs, Operations, Quality and Supply Chain to achieve optimal design solutions.
• Participate in the proposal process to develop and review cost estimates and proposal packages where mechanical engineering resources are required
• The candidate must be a US person:

Education / Certifications
• BSME or AE minimum, MSME preferred

Experience/Qualifications
• Knowledgeable in 3-D CAD modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
• Prior experience in Aerospace Structures and Engineering Fluid Component Design.
• Knowledge of drawings, geometric tolerancing, and drawing interpretation.
• Experience with Manufacturing techniques for limited production hardware.
• Ability to work within a matrix organization to achieve team and program goals.
• Competence in use of Simulate, NASTRAN, ANSYS stress analysis packages desired
• A positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
• Seven (7) to fourteen (14) years’ experience desired.

Industry Experience:
• Previous experience in Aerospace Component Design desired

Optional:
• Pro-E/CREO/Simulate preferred.
 
Job Number: 1910096941
Job Location: Windsor Locks, CT
Overtime: possible
Duration: 12 months
Start Date: ASAP
Input Date: 05/21/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.
- The Mechanical Design engineer will be responsible for Mechanical Engineering activities associated with the design, development, and qualification testing of thermal control and environmental life support components and assemblies for various aerospace applications including NASA’s Crew Exploration Vehicle, NASA’s International Space Station as well other aerospace and satellite platforms.
-This is an individual contributor level position.

Requirements:
- 8-15 years’ experience desired.
- Bachelor's Degree required.
- Knowledgeable in Pro-E/CREO modeling fundamentals, stress and fatigue analysis, machine design, and material selection.
- Previous experience in aerospace structures and engineering fluid component design required.
- Competence in use of NASTRAN, ANSYS, or simulate stress analysis packages desired.
- Knowledge of drawings, geometric tolerancing, and drawing interpretation.
- Experience with manufacturing techniques for limited production hardware.
- Ability to work within a matrix organization to achieve team and program goals.
- The successful candidate will possess a positive 'can do' attitude, good presentation skills, respect for others, confidence, and patience.
 
Job Number: 10278
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Duration: 1 yr
Input Date: 03/19/2019
Last Updated: 06/25/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer

Description:
Location: Phoenix, AZ
Rate: $39.00/HR
Duration: 6 month contract
Per Diem Split: No

****MUST be a U.S. Citizen or Permanent Resident****
**** Candidate must be experienced with Teamcenter and NX modeling software and have aerospace packaging experience****

Job Description:
- Mechanical Designer/MCAD Drafter with emphasis on aerospace electronics packaging.
- Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
- Will interface with other engineering groups to insure design requirements are fulfilled.
- The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints.
- The position will work with cross functional teams to resolve issues.

Responsibilities may include:
- Manages highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints.
- May include utilization of computer aided design applications.
- New product development from concept through production.
- Generate detailed solid models and engineering drawings.
- Processing documents through document change system.

Qualifications
- Minimum 8 years mechanical design experience required.
- H.S. Diploma required.
- Related technical degree a plus.
- Minimum 8 years solid modeling experience.
- Siemens NX11 a plus.
- Experience with Siemens Teamcenter PLM Software.
- Strong knowledge of GD&T ASME Y14.5.
- A background working on avionics design related experience a plus.
- Strong knowledge of manufacturing processes.
- Familiarity with DO-160 and DO-254 development guidelines a plus.
- Applicant should be highly motivated, with demonstrated leadership and communication skills.
- Close attention to detail required.
- Must be a US citizen or permanent resident.
- Good organization and planning skills required.
- Critical competencies: Customer Focus, Drive for results, Technical skills, Interpersonal savvy, Commitment to Continuous Improvement, Effective Teamwork.
 
Job Number: 10407
Job Location: Phoenix, AZ
Rate: $39.00/HR
Per Diem: No
Duration: 6 mos
Input Date: 02/05/2019
Last Updated: 03/04/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / Engineer - Creo/Catia Secret Cleared (063)

Description:
*This is a full time, 1 year contract, located in Orlando*
*Must have an Active Secret Clearance in order to apply (this requires US Citizenship)*



We are seeking a Design Engineer who has experience in designing mechanical or machined parts used in aerospace vehicle production. packaging design, layouts, packing schemes and datalink design.



Daily duties will include verifying engineering drawings and related documents for soundness, efficiency, and simplicity in design; completeness, clarity, and dimensional accuracy; correctness of materials and processes; conformity to design/drafting standards, design specifications, and practicability; and economy of fabrication, assembly, and installation. Packaging design, layouts, modelling, packaging,
materials analysis, ability to create Interface Control Drawings (ICDs), Instructional Engineering Releases (IER), materials analysis, trade studies, as well as hardware integration and testing.



Required:
*5-10 years’ RECENT designing/drafting experience using Creo 2/3 or Catia V5.
*Experience in creation and reading of documentation of drawings and BOMs
*Knowledge of ASME Y14.5M-1994 Geometric Dimensioning & Tolerancing (GD&T)
*ASME Y14.24M Engineering drawings and general drafting experience practices of IAW ASME Y14.100.
*Occasional travel to manufacturing sites in Ocala, FL or Troy, AL
*Active Secret Clearance
*AS Degree with 10+ years’ experience or 5+ year with a BSME.



Preferred:
*Experience with Windchill



Benefits
*5 Medical plan options and dental plan available
*Per diem split is available for out of the area applicants
 
Job Number: 063
Job Location: Orlando, FL
Input Date: 02/28/2019
Last Updated: 03/21/2019
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Designer / MCAD Drafter

Description:
The ideal candidate will manage highly complex drafting and design of assembly drawings based on layouts, sketches and blueprints. This may include utilization of computer aided design applications.

The Mechanical Designer/MCAD Drafter will work with emphasis on Aerospace Electronics Packaging. Activities will include:
• mechanical conceptual layout,
• detailed design, and
• engineering documentation.

The Designer/Drafter will interface with other engineering groups to insure design requirements are fulfilled. The position may involve direct interface with customers (internal and external) and suppliers in support of developing an understanding of the mechanical design constraints. The position will work with cross functional teams to resolve issues.

Responsibilities may include:
• New product development from concept through production.
• Generate detailed solid models and engineering drawings.
• Processing documents through document change system.

Requirements:
• Must be experienced with Teamcenter and NX modeling software and have Aerospace Packaging experience.
• Minimum 8 years Mechanical Design Experience
• Minimum 8 years Solid Modeling Experience.
• Experience with Siemens Teamcenter PLM Software.
• Strong knowledge of GD&T ASME Y14.5.
• Strong knowledge of Manufacturing Processes.
• Applicant should be highly motivated, with demonstrated leadership and communication skills.
• Close attention to detail
• Must be a US citizen or permanent resident.
• Good organization and planning skills

Preferences:
• Related technical degree
• Siemens NX11
• Background working on Avionics Design- related experience
• Familiarity with DO-160 and DO-254 development guidelines

Critical competencies:
• Customer Focus,
• Drive for results,
• Technical skills,
• Interpersonal savvy,
• Commitment to Continuous Improvement,
• Effective Teamwork.
 
Job Number: 1910097975
Job Location: Phoeniz, AZ
Duration: 6 months
Start Date: ASAP
Input Date: 02/05/2019
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer


Location: Cary, NC

12+ month contract






Description:

MANDATORY QUALIFICATIONS:
•B.S. in Mechanical Engineering or related discipline with 5-10 years of Design, Analysis, or Test Engineering experience
•Experience in Solid modeling. Autodesk Inventor preferred.
•Strong technical aptitude, analytical, and problem-solving capabilities.
•Excellent interpersonal and communication skills, both verbal and written
•Technical writing experience with clear and concise report and coordination memo writing.
•Ability to work in a cross functional team environment

PREFERRED REQUIREMENTS
•Understanding of good design principles and GD&T.
•Drafting experience including 3D modeling and drawing creation.
•Structural analysis (hand calculations & FEA) experience
•Ability to review and implement customer requirements
•Excellent time management and negotiation skills.
•Ability to manage multiple assignments.
•Ability to translate customer requirements into viable technical and commercial solutions.
•Ability to understand and apply theory to complex problems and use engineering judgement.






DESCRIPTION OF WORK/PROJECT:

The clients Electromechanical Product Development group is seeking a highly motivated individual to work with the team on the design, testing, and implementation of aerospace systems. Specifically the team is looking to support the development of products from initial concept, through prototyping, until final flight-testing. A strong design background is required to successfully develop a product from concept to production in a profitable manner. The position will require collaboration with our global engineering and manufacturing teams to execute the product development process.


















____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 56102
Job Location: Cary, NC
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 02/08/2019
Last Updated: 03/13/2019
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer – RS 3

Description:
Our client designs, builds, and launches rockets that carry people and satellites into space to support its customers’ tracking, communication, and exploration goals. Over its 100 years in existence, our client has built not just rockets but trust, partnering with both commercial and government customers to achieve critical missions. Build on your own achievements; apply to work with our client as:

Mechanical Engineer – RS 3
(U.S. Citizenship or Green Card Required*)
Decatur, AL
2019-7849

Responsibilities:
• Research, design and develop instruments, automation controls, engines, machines, mechanisms, hydraulics, heat transfer, cryogenic and ordnance components and systems used in the transmission, measurement and use of energy.
• Apply mechanical engineering principles to the planning, design, development and testing of mechanical systems.
• Stress analysis to support drawing release and analysis of Atlas and Delta products and nonconformance analysis and disposition.
• Structural analysis to support Ground Support Equipment hardware development
• Classical stress analysis, FEM modeling and analysis using FEMAP and NX NASTRAN.
• Documentation of analysis.

Qualification:
• Understanding of company tools and processes.
*U.S. Citizenship or Green Card is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s in mechanical or aerospace engineering
• 5+ yrs.’ exp in structural analysis using Nastran required

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7849
Job Location: Decatur, AL
Rate: Based on experience
Duration: 12 Months
Input Date: 02/01/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Jarrett Lee
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Metallurgist - Aerospace - Seattle WA Area 10/2018

Description:
Keltia Design Inc is a technical support services company providing engineering design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry around the US and Canada and Europe.
https://keltia-design.com/open-jobs/


Our client is a national leader in aerospace R&D and manufacturing technology and is looking for an experienced Metallurgist to join their R&D Department to complement their ongoing R&D projects in Actuation Systems and other Aerospace Applications

This can be a contract position with the option of going direct if desired and an attractive compensation package is available.
10 Years experience with Aerospace applications desired.
This position will involve responsibility to support the design, R&D and manufacturing departments.
Requirements

Bachelor’s degree in Engineering and/or Materials Science preferred with. 10+ years’ experience in an aerospace environment
Good documentation skills and practices Proficient in Microsoft Office (Excel, PowerPoint, Outlook, MS Project)
Disciplined and high attention to detail Ability to communicate effectively with internal and external customers
Ability to work well in a diverse team environment and with minimal supervision
If you wish to be submitted please send an updated resume in Word format with your salary requirements and availability.
 
Job Number: KeltiaMAS1018
Job Location: Seattle, WA
Rate: DOE
Duration: Direct/Contract
Start Date: ASAP
Input Date: 11/10/2018
Last Updated: 02/01/2019
Firm Name: KELTIA DESIGN INC
Attention: Emily
Address: 2615 W CASINO RD UNIT 1A
City, State: EVERETT, WA 98204
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineer (MBSE)

Description:
Location: Canoga Park, CA
Rate: $70.00 - $96.50/HR
Duration: 6 month contract
Shift: 9/80 Schedule. OT possible.
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-A mastery level of practice as a SysML Model User and Builder is required.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.


Skills:
Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.


Education:
-BS or MS in Engineering, Computer Science or related field is required.
-MS in Systems Engineering is desirable.
 
Job Number: 9767
Job Location: Canoga Park, CA
Rate: $70.00 - $96.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 03/06/2019
Last Updated: 04/29/2019
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Multi-Media Graphic Designer 4

Description:
Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

We are currently searching for the right talent to fill this opportunity:

Multi-Media Graphic Designer 4
(U.S. Citizenship Required*)
Tukwila, WA
2019-7900


Join our Creative Service’s Visualization Design team to be a part of supporting critical efforts within sales and marketing, production systems and employee communications. The team’s visuals are presented in a range of styles from simple ink and paint to hyperrealism.

Responsibilities:
• Assist producing digital media, special effects, animation and static imagery in a fast paced, deadline driven environment.
• Assist refining design concepts. Format elements of visualization design packages that include, but are not limited to, production of both static and animated in-flight and on-ground visualizations of commercial and military aircraft, in various customer airline liveries and paint schemes.
• Collaborate with others in developing solutions to a variety of design problems of moderate scope and complexity while adhering to established design guidelines.
• Generally transactional work, with short deadlines and with high expectations for quality.
• Work with senior designers and creative directors and help them in their daily tasks to produce amazing visuals for use across the enterprise.
• Seek alternative ways to present or define visualization design solutions, consistently draw upon multiple and diverse sources (individuals, disciplines, bodies of knowledge) for ideas and inspiration, and utilize state-of-the-art visualization tools to present clear solutions to visual design problems.
• Work under general supervision and receive direction for work performed. All work will be reviewed upon completion for accuracy and adequacy in meeting design and communication objectives.
• On call position: 20 hrs/week to start, may increase as volume increase

Qualification:
• Demonstrated ability to manage complex projects and synthesize direction from many individuals.
• Excellent communication skills and demonstrate the ability to work with business partners to understand their business and the needs of that business.
• Able to scope, estimate, and schedule project activities.
• Able to work efficiently under pressure, developing captivating visuals within tight deadlines.
• Collaborative and team–oriented with excellent oral and written communications skills.
• Self–starter with strong work ethic and Able to manage own time and take initiative.
• Demonstrated proficiency working in Autodesk 3ds Max, V-Ray and Adobe Creative Cloud (emphasis on After Effects, Photoshop, Illustrator and InDesign) is required.
• Production experience with decimation, model optimization and re-topping is a definite plus.
• Production experience working with Unity, Unreal, Substance Painter and physical-based rendering (PBR) is a definite plus.
• Skills in organizing and backing up files.
• A portfolio that demonstrates creativity and sophisticated design/marketing concepts and solutions
*U.S. Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's degree and typically 10+ years’ related work experience, a Master’s degree and typically 8+ years’ related work experience or an equivalent combination of education and experience.
• Bachelor's degree in Art & Design preferred but not required.
• 5+ years’ experience in visualization design or related field is required.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7900
Job Location: Tukwila, WA
Rate: Based on experience
Duration: 31 Weeks
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Kinleney Riley
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Multiple Positions: Software Engineers in El Segundo, CA

Description:
Software Engineer

Location: El Segundo, CA
Duration: 6+ months

Description:
Client Satellite Division in El Segundo is seeking Software Engineers, passionate about space and excited to work in a multi-disciplined, collaborative engineering environment to design, develop and implement control and communications software for a new fleet of Client satellites.

A variety of projects to match diverse interests include:
- Software infrastructure and device drivers for new embedded processors and hardware interfaces to satellite sensors and actuators.
- Communication payload resource control, data management and network interfaces.
- Guidance and navigation control algorithms.
- Web-based tools and services supporting satellite development and operations.
- Integration and test of satellite control software using simulators and ground systems.

Primary Responsibilities:
- Responsible for full life-cycle development including requirements analysis, software architecture, design, coding, unit test, integration and formal qualification.
- Candidate should possess excellent communications skills to participate in design and code reviews, have a thorough understanding of version control and software quality attributes, such as testability, portability and maintainability, and enjoy a self-driven and collaborative development approach.
Client is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.

Qualifications:
Degree and typical experience in engineering classification:
Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
Degree in computer engineering, computer science or equivalent is preferred.

Basic Qualifications:
- 5+ years of software development experience in C++ using object oriented design methods.
- Proficiency in design and implementation of multi-threaded real-time applications; use of TCP/IP protocols and user/kernel level OS abstractions.

Preferred Qualifications:
- Hands-on experience with Java, C#, JavaScript, Python, TCL, XML.
- Experience with avionics control algorithms, search algorithms and math libraries, telemetry and command handling.
- Hands-on experience with hardware interfaces, embedded processor architectures, I/O device drivers and board support packages.
- Hands-on experience with embedded/real-time OS (Linux, VxWorks, Integrity) and CAN or SpaceWire protocols.
- Hands-on experience in networking, SQL and noSQL databases, web-based development.
- Proficiency in UML modeling, test-driven development, Agile process and DevOps tools.

Experience Level:
Individual Contributor
 
Job Location: El Segundo, CA
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 6 months
Start Date: January
Input Date: 12/26/2018
Last Updated: 05/09/2019
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer with Espirit and CATIA V5

Description:
Principal Duties:

• Plan machining operations by reviewing work orders, 3D model, engineering GD&T tolerances, materials, specification, and machining parameters.
• Works on project team with primary responsibility in startup and run-off actions to introduce new machining centers into production
• Provides guidance to CNC programming staff in best practices. Assists in establishing best practices and follows-up to insure they are followed correctly
• Analyze drawings and design data in order to calculate correct machining methods, machines, tool selection, machine speeds, and feed rates in accordance with leading-edge industry best practices
• Programming CNC mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, and compensation values
• Leads in the design and creation of modular fixturing and quick-change tooling
• Maintain specifications; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; adhering to quality assurance procedures and processes

Qualifications:

• Eight years of CNC programming experience which includes 5 axis vertical milling, lathes with live tooling and 4 axis horizontal milling
(must have 3 year experience in 4 axis horizontal mills)
• Demonstrated experience in new equipment and new program startups
• Design and application of universal or modular fixturing including zero-point
• Experience in the operation of pallet systems including the establishment of database parameters
• High speed or profit milling of aluminum in aerospace or automotive industries
• Proficient understanding in use of Presetting machines
• Good problem solving and conceptual skills
• Excellent communication skills to convey detailed instructions to machine operators, programmers, and suppliers.
• Proficient understanding of G-code and M-code programming
• Interpret GD&T
• Demonstrated experience in improving machining cycle times (speeds & feeds) and setup times in aerospace or automotive industrial production environments
• CNC programming using Esprit or CATIA V5 Advanced Machining
• Proficient understanding of CATIA V5 3D design
• Basic metal fabrication skills
• Experience in machining aerospace composite materials and using high speed routers
• Associates Degree, Machinist/CNC Programming
 
Job Number: 18-821
Job Location: AR
Per Diem: Split
Overtime: Possible
Duration: 6 months +
Start Date: mid June
Input Date: 04/25/2019
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT DESTRUCTIVE TESTING - LEVEL 3 ENGINEER

Description:
JSG is hiring a Product Integrity & Quality Controls Engineer for our Client in Stratford, CT!

This is a position for a Non Destructive Testing (NDT) Level 3. In this position, located in Stratford, Connecticut, you will be primarily developing Ultrasonic (UT) nondestructive test instructions for composite components. Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Sikorsky Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT level 3's, Level 2’s, and Engineering technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification). Prepare and review engineering specifications. Develop and evaluate new equipment and technology. Provide technical support to manufacturing, engineering, programs, field personnel, and suppliers. Audit internal and external NDT inspection facilities. Participate in development of NDT training course material for level I, II, and III. Test and certify NDT level I, II, and III inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications :

Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT).
Ability to certify to NAS 410 Sikorsky UT level 3 requirements within 90 days of employment.
Including vision correctable to 20/25 in at least one eye.
Experience performing Ultrasonic NDT on Composite materials.
Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
Must be a US Citizen or legally authorized to work in US as a permanent resident.
Desired skills :

Composite UT experience on aerospace components.
Level 3 Eddy Current (ET) certification, and Fluorescent Penetrant (PT) level 3 certification are a plus.
Bachelor's degree or above in Engineering or Technology discipline.
Documented 5-10 years of aerospace nondestructive testing.
Technical writing experience.
Non-destructive test (NDT) experience with composite structures.
The ability to collaborate and work well with fellow team members.
Experience using CATIA or other 3D modeling software a plus.
Familiarity with NAVAIR Nondestructive inspection manuals and processes.
Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 369310
Job Location: Stratford, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 18 Months
Start Date: ASAP
Input Date: 11/23/2018
Last Updated: 02/15/2019
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Power Supply Test Design Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Power Supply Test Design Engineer
(US Citizenship Required*)
Pittsfield, MA
2019-7904

Responsibilities:
• Develop and transfer Power Supply Acceptance Tests
• Develop Power Supply Test Fixtures, Acceptance Test Pans (ATP), and Acceptance Test Specifications (ATS)
• Analyze Fault Coverage and Test Equipment Accuracy
• Support troubleshooting and repair of failed power supplies
• Assist / mentor Power Supply Test Development Team
• Substantial contribution to
o Analyze, define, and manage electrical requirements
o Analyze function & performance (e.g. timing, power, etc.)
o Design, integrate and verify electrical components, equipment and systems
• Contribute to / support
o generate and maintain electrical work products (plans, specifications, design documentation, etc.) used for internal consumption and/or deliverable to external customers
o research and analyze data, such as customer design proposal specifications, and manuals to determine feasibility of design or application
o generate engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle
o improving electrical organizational processes
• Plan and lead electrical engineering root cause analysis for electrical issues, conduct experimental tests, evaluate results to formulate, and implement solutions to issues
• Develop and present electrical requirements, concepts, designs, decisions and results to internal management and external customers
• Substantial contribution to electrical reviews of electrical components, equipment and systems
• Evaluate vendor capability to support product development
• Select components and equipment based on analysis of requirements
• Plan and execute project tasks for activities described above
• Work with multiple work groups, including with senior levels; regular Contact with project leaders and Program Managers; some contact with external customers
• May contribute to technical subcontract management that may include technical oversight and subcontractor work product evaluation

Qualifications:
• Proficient in the theories, principles, processes, design tools, and techniques of Electrical Engineering
• Proficient knowledge of other related disciplines
• Proficient in MS Office applications
• Proficient written and verbal communications skills
• Able to think creatively, to multi-task, and sell concepts & ideas
• Skilled in communicating issues, impacts, and corrective actions
• Able to recognize and clearly report information relevant to sound electrical engineering design
• Travel and/or security clearance may be required
• Understands and applies basic project management principles including IMS, earned value and score cards
• Able to work well in a team environment
Preferred:
• NH Research 8100i and 5700 Testers
• emPower Test Executive
• PowerBook and/or Visual Basic Programming
• C programming and UNIX
• Java, Kermit, and/or Perl scripting
• Power Supply Test and the Test Engineering Process
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor's in Electrical Engineering, a related specialized area or field is required (or equivalent experience) and 5+ years of relevant experience; or Master's and 3+ years of relevant experience.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2019-7904
Job Location: Pittsfield, MA
Rate: Based on experience
Input Date: 02/07/2019
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Detrom Garrett
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Principal Engineer Software Quality 3 - Clearance CA

Description:
Principal Engineer Software Quality 3 (Job Number:18027673)

Number of Openings: 1

Location: California-Rancho Bernardo

Shift: 1st Shift

Target Start Date: Feb 4, 2019

Target End Date: Jan 31, 2020

Pay rate: $52.00

Location: Rancho Bernardo, CA

Clearance: Secret needed to start

Candidate will provide the program’s overarching focus on systems and software, product and process, quality assurance throughout the entire software life-cycle.

• Actively engage and lead Systems and Software Quality Assurance SSQA) bid and proposal efforts to ensure the SQA cost estimating relationship and statement of work are properly bid and estimated.
• Participate in Peer Reviews and Product Reviews as a principal team member to ensure 1st time quality and compliance to program and company requirements.
• Ensure the flow down of requirements is complete and unambiguous and that consistent bidirectional traceability is maintained.
• Participate in contractual reviews and audits, program/IPT meetings, and configuration control board meetings to provide SQA leadership and guidance.
• Perform process audits of the engineering and management processes to assure compliance to established policies, procedures, work instructions, and program specific plans.
• Examine the products associated with the preparation and configuration control of software test environments to assess the team’s readiness to enter formal testing.
• Witness execution of software qualification and system acceptance tests to ensure tests are executed in accordance with approved test procedures, requirements are fully verified, and that all test procedure and software anomalies are documented and tracked to closure.
• Evaluate and ensure the overall capability and quality management system of software suppliers via; pre-contract supplier surveys, surveillance audits, product reviews, formal milestone reviews, and test witnessing.
• Facilitate thorough root cause analysis on all major findings product and process) and ensure appropriate corrective and preventive actions are developed and implemented in a timely manner.

Basic Qualifications:

· Bachelor’s Degree in a Science, Technology, Engineering and Math (STEM) and 5 years of software engineering or quality experience OR Master’s Degree in STEM and 3 years of software engineering experience; OR a PHD
· Experience developing and testing software coded in Java, C++, C and other OOP languages
· Experience within the aerospace/defense industry
· An active in-scope DoD Secret clearance
· The ability to obtain/maintain program access

Preferred Qualifications:
· Experience with software life cycle processes, including peer reviews, requirements analysis, implementation, test, configuration management, cyber security and risk management.
· Experience with modern software development models (Waterfall, Incremental, Spiral, Agile)
· Experience with software metrics implementation and analysis
 
Job Number: MB-1710S
Job Location: Rancho Bernardo, CA
Rate: 52/hr max
Per Diem: no
Duration: 12 months
Input Date: 12/20/2018
Last Updated: 03/28/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Rep (Buyer/Analyst) Level 2 / no clearance CA

Description:
163353
1208-1 Procurement Rep (Buyer/Analyst)
Work Location: Palmdale, CA
Status: Open

Qty: 6
Desired Start Date: 10/25/2018
End Date: 1/9/2020
Work Schedule: 9/80

Job Description:
Develops subcontract specifications, work statements, and terms and conditions for the procurement of specialized materials, equipment, and services. Prepares bid packages, conducts bidders' conferences, analyzes and evaluates proposals, negotiates subcontract provisions, selects or recommends subcontractors, writes awards, and administers resulting subcontracts. Negotiates and coordinates additions, deletions, or modifications to subcontracts. Participates with contracts administration and purchasing to develop subcontract policies and procedures. Procurement of Airframe detail parts and assemblies from engineering drawings (build to print) in a Material Requirements Planning (MRP) system and Systems, Applications, and Processes (SAP) system in support of various airframes. Source and purchase machinery, equipment, tools, raw material, packaging materials, parts, services, and/or supplies necessary for operation of an organization. Compiles and analyzes statistical data to help determine feasibility of buying products and to help establish price objectives. Compiles information to keep informed on price trends and manufacturing processes. Confers with suppliers and learns to analyze suppliers operations to determine factors that affect prices and determines lowest cost consistent with quality, reliability, and ability to meet required schedules. Reviews proposals, negotiates prices, recommends suppliers, analyzes trends, follows up orders placed, verifies delivery, approves payment, and maintains necessary records. May prepare bid packages. Will work with many internal and external departments and customers. Some travel may be required.

Will accept experience in lieu of degree.
-Buyer/Procurement defense/aviation/aerospace
experience.
- FAR/DFAR
-TINA (Truth & Negotiations Acts)
-Experience with negotiating contract types
(Note-this is not a logistics role.)

Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $50.00 Hourly

Areas of Expertise Advanced Purchasing No 1 4 - 6 Years
Areas of Expertise Commodity Purchasing No 1 4 - 6 Years
Areas of Expertise Purchasing No 1
Software Skills SAP No 2
Technical Skills Purchasing No 1
 
Job Number: JE-1208-1
Job Location: Palmdale, CA
Rate: 50/hr max
Per Diem: no
Duration: 15 months
Input Date: 04/08/2019
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com