Job Search Results

507 listings were found that matched your search words: Keywords: Aerospace ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2024/03/19 Tuesday 04:38AM Pacific Time by ContractJobHunter. )

Listings 1 - 507

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
3 Aircraft Stress Engineers with Composites

Description:
3 Aircraft Composite Stress Engineers Needed.
Require 10+ years of aircraft/aerospace stress analysis with a good composites background.
Previous FEMAP experience is a plus.
Composite airframe analysis experience a MUST.
MUST be US Persons

Qualifications:
-Experience in aircraft or spacecraft composite, design and analysis processes
-Knowledge of composites manufacturing and sizing of composite structures using FEA models, including pre and post processing of NASTRAN models and associated sizing of composite structures
-Minimum 10 years or more of applicable experience in the analysis of structural systems using strength of materials and finite element based methods
-Experience with free-body diagrams and classical stress analysis techniques
-Experience with FEMAP
-Rapid prototyping experience a strong plus
-Excellent computer skills, including Outlook, Word, Excel and PowerPoint
-Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
-Applicants must be U.S. persons as defined by ITAR
Educational Requirements-
Bachelors degree from an accredited institution, with a concentration in a relevant Engineering discipline

The Structures Company is an AA/EOE.
 
Job Location: Mojave, CA
Rate: $80-85/hr DOE
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 11/14/2020
Last Updated: 01/04/2021
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2483 - M&P ENGINEER - cv word doc only

Description:
Support the Engineering, Production and Quality organizations;

Assess various metallic, composite and completion finishing materials (Wood Veneer, Fabric, Leather, etc.);

Engage in engineering development work;

Sign engineering drawings and documentations;

Prepare and approve Test Plans and Test Reports (including flammability);

Perform Trade and Design Studies;

Support various research and development projects;

Create, improve and adapt technical and functional processes;

Take on strategic projects management;

Plan, execute audits, prepare reports and follow up on corrective actions;

Analyze process and systems changes.

University degree in metallurgical, chemical or materials engineering with at least 8 years of pertinent experience (relevant experience in aerospace field is an asset).

Familiar with the materials used in aerospace industry and the manufacturing and application procedures.

Familiar with the typical aerospace and military standards or the aerospace industry standards (e.g.: MIL, SAE specifications, FAA requirements, etc).

Knowledge of the aluminum, composite and aircraft completion finishing materials characteristics as well as their treatment.

You are familiar with flammability certification requirements as per FAR 25.

Practical knowledge and experience of Catia/Enovia V5.

Work under minimum supervision to perform a wide range of technical functions.

Practical knowledge and experience in aircraft structure and completion components.

Customer-oriented with innovative problem solving skills and you are organized.

Strong communication skills both in English (written, spoken) and French (spoken).

Are a team player, working in a multidisciplinary team.
 
Job Number: 2483
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2460 - BUSINESS ANALYST - cv. word doc only

Description:
Produce, maintain and respect the project schedules;

Lead, coordinate and govern meeting for any Process & Tool (SAP) implementation, Adjustment or improvement with the respective project stakeholders;

Produce and maintain Project Management indicators;

Understand and document manufacturing function's business requirements and processes;

Identify and propose solutions meeting business requirement;

Participate in multifunction workshop sessions and activities following SAP implementation;

Identify and manage master data modification;

Perform SAP improvement testing with IT;

Ensure efficient communication and change management with impacted functions;

Identify and document training requirement, perform training with users and super users;

Provide support to SAP users;

Ensure user support, troubleshooting and RFCs tracking with IT teams

Have a Bachelor's degree in Industrial Engineering, Operation Management, Computer engineering or any equivalent relevant experience.

Must have a minimum of 5 years of relevant employment experience.

Have organization skills, rigor and autonomy.

Demonstrate strong leadership skills and love challenges.

Have a great sense of initiative.

Have a very good knowledge of MS Office (Excel, MS Project, Power Point, Visio).

Experience in aerospace or cabinet manufacturing industry is an asset.

Strong knowledge of SAP, a major asset.

Bilingual - (French and English) is required.
 
Job Number: 2460
Job Location: Montreal, Canada
Rate: 50.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2500 - ELECTROMAGNETIC COMPATIBILITY (EMC) ENGINEER - cv, word doc only - On Hold

Description:
Responsible at the aircraft and system level for Electromagnetic Compatibility (EMI)/High Intensity Radiated Fields (HIRF)/Lightning Strike/ Electrostatic Discharge technical requirements.

Knowledge of relevant industry standards (RTCA/DO-160, SAE ARP) and high level of familiarity with airworthiness (TCCA, FAA, EASA) Regulations and Advisory Materials pertaining to EMI, HIRF, Lightning and Electrostatic Discharge.

Execute intermediate to complex engineering assignments related to EMI, HIRF, and Lightning and Electrostatic Discharge requirements.

Analyze new systems designs, assess technical impacts, propose EMC compliance approaches, review/approve technical documents, test plans, test procedures and test reports, and check compliance with certification regulations.

Define scope of work for EMC effort of technical/engineering projects, estimate the time required, plan, highlights technical risks and execute according to priorities.

Define technical requirements, test requirements and perform detailed analysis to ensure aircraft and systems compliance to EMC certification regulations.

Prepare EMI, HIRF, Lightning and Electrostatic Discharge test procedures, execute tests in laboratories and on aircraft and generate results and analysis test reports.

Support and witness EMC tests in Canada, United States and Europe as needed.

Master degree in Electrical or EMC Engineering, or alternatively a Bachelor's degree in Electrical or Physics Engineering with a minimum of eight (5) years of experience in aircraft EMC/HIRF/Lightning/Electrostatic Discharge (FAR 25.981 is an asset).

8 years of experience or more in an aerospace manufacturing company.

Have EMC bench and/or aircraft testing experience.

Have a minimum of five (5) years working experience with systems qualification/certification.

Knowledge of harness design, aircraft design principles including familiarity with aircraft regulatory requirements.

Proficient with the use of PC including Microsoft Office software tools.

Energetic person with strong written and oral communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Must be familiar with DO160, STD ARP, MIL STD, FAA regulations, as well as other applicable airworthiness regulations.

Must be able to analyze modifications at aircraft level and check compliance with certification regulations.

Must be able to support and witness EMC tests in Canada, United States and Europe as needed.
 
Job Number: 2500
Job Location: Montreal, Canada
Rate: 52.00
Per Diem: Paid 3 Months only
Overtime: Paid NOT at 1.5
Duration: 36+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2502 - PROJECT MANAGER - METHODS - cv word doc only

Description:
Coordinate internal and external activities between different functions.

Obtain stakeholder engagement to achieve results.

Establish project schedules and participate in the development of the site plan.

Identify project risks and provide visibility on mitigation plans to mitigate / reduce risks.

Establish contact with internal and external collaborators on timelines and deliverables.

Communicate project progress through presentations and report writing.

Collect and analyze project data from different functions.

Meet key performance indicators of the program department and obtain the commitment of stakeholders.

Work on problems of various magnitudes; Apply knowledge of intermediate to complex problems, being able to work on tasks / non-standard requests.

Grasp the problems from different perspectives, innovate to achieve non-obvious solutions to problems.

Bachelor Degree in Engineering, must have previous experience in project management, preferably within an aerospace engineering environment.

Must have 8 or more years of relevant aerospace experience.

Bilingual - have a good command of French and English.

Have intermediate knowledge MS Office software suite (Word, Excel, PowerPoint).

Have knowledge at beginner or intermediate level of Microsoft Project.

Must have knowledge on implementation of change management activities.

Have strong aeronautical knowledge, especially in the industrial engineering (Methods) domain.

Must have strong experience in Methods, Logistics or Finance domain.

ASSET: Knowledge of VBA programming language.

An understanding of aerospace product certification is an asset.

Knowledge of SAP is an asset.

Must have excellent organisational skills and able to work toward aggressive deadlines.
 
Job Number: 2502
Job Location: Montreal, Canada
Rate: 52.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2504 - LIAISON ENGINEER (MRB)-2504 - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components.

Support to Production, Design Engineering, Procurement & Quality in coordinating resolutions to issues.

Review & trouble shooting of A/C Systems in conjunction with design Engineering as required.

Review & disposition of A/C Wiring & Electrical issues in conjunction with Design Engineering as required.

Corrective Action requests involving Engineering as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Interpret engineering drawings, specs & provide guidance to junior employees.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Job is located in Toronto and is for weekend afternoon shift coverage

Bachelor or Masters degree in Aeronautical or Mechanical Engineering from an accredited University.

Minimum of ten years MRB experience or design experience in Aerospace

Possess good knowledge of aircraft structure & system installation technical requirements, aircraft materials and hardware, standards and specifications

Electrical & Systems experience as this would be considered an asset

Person with excellent communication and interpersonal skills, a high sense of commitment, and a willingness to accept responsibilities while acting independently in a high-pressure partner/supplier team environment

Have previous CATIA, Design and MRB experience including support to production would be considered an asset.

Have previous experience as a Mentor and Coach in either Liaison team environment or working with problem solving teams is an asset

Are flexible with work schedule as this position requires weekend work on a rotating schedule and some travel and short-term relocation assignments, and it work day is Weekend-Afternoon Shift .
 
Job Number: 2504
Job Location: Toronto, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2505 - SENIOR PROJECT ENGINEER - STRUCTURES - cv, word doc only

Description:
Lead Integrated Product Development Team (IPDT) weekly meetings for your respective systems

Develop, harmonize, maintain and update Schedules for each phase of the Program or for each proposed change post-cert, with the Suppliers and CSALP

Interface with the Project Management group and the Work Package leads, you will be responsible for managing the integration of the work package schedule and ensure that it is harmonized with the overall program schedule and across other work packages

Identify and report Issues and Risks with mitigation plans

Ensure effective delivery, review and approval of all deliverables and datasets in line with the program needs and aircraft deliveries

Ensure compliance to all governing documents and processes

Participate in the problem solving and recovery plans when required to maintain key deliverables' timeline

Bachelor Degree or relevant experience in Project Management in an aerospace environment.

Many years of relevant experience in project management or equivalent.

Ideally have experience in aerospace.

Demonstrate excellent oral and written communication skills.

Have superior skills in MS Office including MS Project, PowerPoint and Excel.

Are a team player with strong communication skills who interfaces well with the many business partners involved.

Must have excellent organisational skills and able to work toward aggressive deadlines.

Must have extensive experience in project management activities (planning, schedule follow up and budget management).

Must have knowledge on implementation of change management activities.
 
Job Number: 2505
Job Location: Mirabel, QC, Canada
Rate: 54.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer

Description:
Skill set:
Primary and secondary structural design of light aircraft (FAR 23). First wave will need to have a strong background doing primary airframe structural layout utilizing Catia V5. Later in the program, the focus will be on aircraft primary and secondary detail design utilizing Catia V5. A composite background with experience working with Catia V5 and CPD is ok, but only if there is also experience with metallic structural design.

Position Responsibilities:
Under the direction of project design engineering, serve as a member of a design team providing structural layout and detail design for commercial light/general aviation aircraft. The main product line will require design-to-build activities for a commercial (Far 23) aircraft composed of primary/secondary metallic structure (some composite).

Required:
· 10 years of experience in Aerospace design is a minimum
· 6000+ hours experience with CATIA v5 (R25/R26 preferred)
· Entirely 3D CAD Design using Model Based Definition (MBD)
· Experience with ENOVIA\SmarTeam
· Experience with FAR 23 aircraft much preferred
· Experience with Structural layouts, conceptual/preliminary design phase experience needed.
· US Citizen, Green Card Holder or Permanent Residence Status
· A degreed candidate is highly desired

The Structures Company is an AA/EOE.
 
Job Number: 238
Job Location: VA
Rate: Open
Per Diem: Yes
Duration: 10+ Months
Start Date: FEBRUARY 2019
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanics

Description:
We have an urgent need for contract Aerospace Mechanics here in Moses Lake, WA. This is a very high paying position. The position also has opportunities to become full time.

Job Duties and Responsibilities

Service, repair, troubleshoot and modify aircraft and aircraft engines.
Repair, replace and rebuild aircraft structures, system and functional components.
Assemble and install electrical, plumbing, mechanical, hydraulic, structural components and accessories using hand tools and power tools.
Adjust, align and calibrate aircraft systems using hand tools, gauges and test equipment, machines and equipment such as shears, sheet metal brakes, welding equipment, pneumatic tools.
Research and understand FAA technical data relevant to assigned tasks.
Maintain the premises in a clean and organized manner.
Remove and/or install aircraft components, test IAW MM, and troubleshoot aircraft systems.


Requirements
Knowledge/Skills/Abilities

Strong knowledge in FAA regulations, Aviation Rules (FOD’s, Safety, Quality, Hazardous Materials, Aircraft Marshalling), aerodynamics, aircraft electrical systems, materials science, aircraft maintenance, electrical testing, instrumentation, gas turbine and piston power plants.
Good leadership (individual contributor) presence:
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Good customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to address and solve important issues.
Good organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Good analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Good communication skills (oral, written) with customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Good interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office, including Word, Excel, Outlook, and PowerPoint.
Education

Associate’s Degree (or Technical School equivalent) in Aircraft Maintenance or related field from an FAA accredited school.
A&P Certificate.
Japanese Bilingual preferred.
Experience

Three (3) plus years of aircraft mechanical experience preferred.
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Buyer and Procurement Specialist

Description:
We are searching for a dedicated and passionate aerospace buying and procurement specialist to work on a new exciting aircraft project in Moses Lake, WA.


Role Description
Coordinate with Vendors, purchasing goods, receiving goods, accounting goods.
Develop and analyze procurement data.
Resolve material discrepancy with internal customers and suppliers.
Resolve invoice discrepancies.
Place inventory replenishment/purchase orders and trace, to proactively meet customer requirements, follow-up and expedite as required.
Analyze company & customer inventory for procurements and recommendations; control and plan inventory to maximize customer service and achieve turn targets.


Requirements
Qualifications
Must have formal purchasing/supply chain management training at a recognized institution or equivalent experience in an aerospace purchasing/supply chain environment
Needs to be able to work with Japanese expats.
Ability to analyze inventory requirements using company computer systems.
Ability to research and analyze procurement data and develop alternate sources.
Must have strong verbal and written communication skills including a professional telephone manner.
Must be a self-directed team player and be able to carry out the duties of the position with minimum supervision in a team environment.
Must have good organizational, analytical and negotiation skills.
An understanding of accounting principles and accounts payable would be an asset.
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Avionics

Description:
The Aerospace Engineer, Avionics position located here in Moses Lake, WA is responsible for supporting for the focal avionic systems engineer in developing, testing and certifying systems for a project. This role requires the significant exercise of independent discretion and judgment in matters of significance.


Job Duties and Responsibilities:

Review and support Avionics Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Coordinate with certification authorities to seek clarification on requirements.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Create, review and approve interface control documents and any sub level writing interface documents.
Support Avionics Flight Testing Activities, including but not limited to:
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Complete special projects and tasks assigned by Group Lead.



Requirements
Knowledge/Skills/Abilities

Knowledge of system development activities and flight certification activities, including knowledge, skills and competency with avionic systems utilized in vehicle design (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF).
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to in still a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (Comm/Nav/Surveillance/FMS/Displays/Recorders/CPDLC/CAS/antenna installations/VHF)
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Electrical Systems

Description:
Role Description

The Aerospace Engineer, Electrical Systems position located here in Moses Lake, WA is responsible for supporting for the development, testing and certification of the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, wiring, etc.). The role requires the significant exercise of independent discretion and judgment in matters of significance.



Job Duties and Responsibilities:

Review and support Certification Activities.
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Plans.
Review qualification by similarity and/or analysis repots.
Review system safety documents (PSSA, SFHA, ADHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in System Design Reviews.
Coordinate with suppliers.
Coordinate with certification authorities.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Support Flight Testing Activities, including but not limited to:
Help determine test specification definition.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefing.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to crate rejection tags.
Make assessments to ensure safety pf flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test result reports.
Electrical Systems.
Creating instrumentation definitions for the electrical systems (locations of instrumentation, sample rates, unit definitions, etc.)
Release of engineering documentation for component changes and new installation, ensuring appropriate configuration control
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Knowledge of flight test operations and flight certification, including knowledge of electrical aspects of the various systems and components and/or controllers on the airplane.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people/
Strong customer service tool box:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve customer needs.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal customers.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly an effectively verbally, Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all level of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.
Education

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Experience

Aerospace engineering experience in Electrical Systems, including experience in the electrical aspects of the various systems and components and/or controllers on the airplane (e.g. ECS, Fuel, hydraulics, engines, fire protections, anti-ice, lights, electrical power, writing, etc.).
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Powerplant & FIFA

Description:
The Aerospace Engineer, Powerplant & FIFA position located here in Moses Lake, WA is responsible for supporting the development and TC test pertaining to the Propulsion System including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System. This role requires the significant exercise of independent discretion and judgment in matters of significance.



Job Duties and Responsibilities (Essential Functions):

Support Flight Testing Activities, including but not limited to:
Discuss and review test plans and preparation activities.
Help determine test specifications (based upon system architecture).
Attend Ground/Flight Test briefing and debriefings
Participate in Test Readiness Reviews and ensure on-time Engineering deliverables.
Generate developmental engineering drawings and instrumentation change requests as required.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Create and review Aircraft Restrictions
Create and review Aircraft Troubleshooting
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.
Complete special projects and tasks assigned by Group Lead.


Requirements
Knowledge/Skills/Abilities

Strong Knowledge of flight test operations and flight certification, including:
Propulsion System Integration and Certification.
APU and Tailcone Integration and Certification.
Compliance to requirements for; Powerplant / APU Installation, Engine Oil and Fuel System, FADEC, Engine Operating Characteristics, Negative G, Rotorlock Screening, In-flight Restarts, Engine Performance, Cooling and Ventilation, Drainage, Engine / APU Inlet Distortion, Water Ingestion, Fireworthiness, and Thrust Reverser Endurance.
Aircraft Fuel Systems Design, Integration and Certification.
Experience with; Fuel Vent System, Negative G, Cold Soak / Cold Weather Operation, Ullage and Sump Volume, Fuel System Performance, and Fuel Icing Rig.
Well versed with 14 CFR Part 25 and EASA CS-25 certification process.
Good leadership presence as well as people management skills:
Future-oriented in thinking and operation.
Able to lead by example and live/work by company values.
Ability to successfully contribute to a positive and productive work environment.
Able to instill a sense of urgency in team members.
Able to be patient and objective in difficult situations with different types of people.
Strong skill set for:
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong follow-through, quick thinking and resourceful.
Ability to remain calm, cool and collected in stressful situations.
Strong sense of urgency to resolve the issue.
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Ability to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Strong communication skills (oral, written, presentation) with both external and internal team.
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees and customers.
Excels at communicating clearly and effectively verbally. Strong proficiency in writing summaries, documents, reports, and presentations.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Intermediate Excel proficiency required. Able to quickly learn new software and systems.
Proven track record of improving the efficiency of assigned processes or procedures.


Education

Four (4) year degree in Engineering (Aerospace or Mechanical).
Other Engineering fields may be considered.
Experience

Four (4) years aerospace Relevant aerospace engineering experience in propulsion systems including the Nacelle and Engine Build-up (EBU), Auxiliary Power Unit (APU), and the Aircraft Fuel System.
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Manufacturing Engineers

Description:
STS Technical Services is hiring Manufacturing Engineers in Greensboro, North Carolina.

Job Summary:

The Design Manufacturing Engineer is responsible for all manufacturing aspects of the fabrication and installation of the landing gear and hydraulics systems.

Job Duties:

Take complete ownership of assigned A/C area(s)
Approve ail tooling required for assigned A/C area(s) creating new Tooling Requests, performing Root Cause Analysis on Non-conformances generated by tooling, and identifying work-arounds for tooling deficiencies
Analyzes statistical data including process capability studies, tests capability studies, and through-put rates
Review and approve all Engineering drawings and models for assigned A/C areas, ensuring parts, assemblies, and/ or installations are manufacturable
Manage all Design for Manufacturability Requests for assigned A/C area(s) reviewing/ creating and approving all internal and external submissions
Review and approve all CR’s (Change Requests) to determine positive/ negative impacts to Production coordinating with the various departments

Qualifications:

Bachelor’s Degree in Manufacturing Engineering required; Engineering Tech preferred, but not required
5 years’ minimum and 20 years’ maximum structural/ systems Mfg. Engineering experience with the fabrication, assembly, and installation of hydraulics and landing gear details and assemblies
Six Sigma Certification a plus
Experience in sheet metal fabrication a must to include hand, brake, hydro-form, hot forming, hot joggling, super plastic forming, and stretch forming
Experience with GD&T a must
Experience in an iPT (Integrated Product Team) format is a plus
Proven ability to define small-to-large, simple-to-complex detail part fabrication, assembly, and installation tooling
Proven knowledge of chemical and physical processing of metallic and composite parts including heat treating, priming, painting, anodizing, NDT, etc.
Proven knowledge of hydraulic system manufacture, installation, and testing of but not limited to pumps, plumbing and actuators
Proven ability to troubleshoot defects, manufacturing errors, and time consumption/ learning curve issues to improve shop floor performance
3D Drawing reviews and approvals for Engineering designs and specifications to ensure manufacturability of detail parts, assemblies, and installations
CATIA V5/ V6 experience is a plus
SAP experience is a plus
Teamcenter Manufacturing/ Process Planning creating MBOM’s and BOP’s are a plus
Ability to analyze a variety of engineering data to help determine how to meet company objectives

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 41636
Job Location: Greensboro, NC
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Quality Inspectors

Description:
STS Technical Services is hiring Aerospace Quality Inspectors in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Job Summary:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, CHEP’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Major/Key Accountabilities:

The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
Perform duties delegated by Quality Assurance Manager
Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
Performing semi-annual internal audit of the repair station and any approved contractors
Coordinate with station manager inspection requirements
Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all CHEP employees
Provide feedback/suggestion to improve customer satisfaction
Communicate with customers and regulatory agencies during audits or visits
Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
Maintain safe and clean work environment

Measures:

Overseeing the quality of products in accordance with monthly budgeted production goals
Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
Establishing a quality and compliance system which will result in no major audit finding
Equipment rejection rates shall be at 98% or higher
Maintaining positive MTTR
Contributing to positive MOP by controlling wastes
Enforcing the CHEP Zero Harm Culture and goals
Authority/ Decision Making:
According to the company matrix

Qualifications:

Appropriately certificated under Part 65 (A&P or FAA Repairman)
A&P License REQUIRED
Ability to work in a high activity/fast paced environment while managing associated stress
Possesses excellent organizational skills and ability to work independently
Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
Effectively execute training in accordance with the Approved Training Program and internal requirements
Ability to make quality decisions and effectively solve problems
Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
Ability to build and maintain effective working relationships with all levels of management and staff
Ability to lift, pull, and push in excess of 65 lbs
Must be able to read, write and understand the English language
Confident personality with the ability to interface/communicate with the authorities and customers
Experience in performing Audits
Strong knowledge of FAA regulations and Part 145 requirements
Competent in reading and interpreting manuals, drawings, policies
Good communication and punctuation skills
Computer literacy and familiar with Microsoft office
Ability to learn new software programs and systems

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 43601
Job Location: Hawthorne, CA
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Stress Analyst Secret Cleared (549)

Description:
*This is a 1 year or more contract position located in Orlando*
*Must have an Active Secret Clearance in order to start position*



We are seeking a contract stress analyst or structures engineer who will be working on flight vehicle (fixed or rotary wing) on aircraft and/or missiles applying knowledge to dynamics and stress of flight of different materials upon vehicles. Models will be put into simulations, and need top pass physical as well as environmental conditions analysis, using linear/non-linear methods.



Candidate will be testing, analyzing, and modifying existing aircraft and integrating modified components into airborne vehicles. The applicant will be a lead analyst, and as such, in addition to normal stress analysis duties, will also will analyze and write documentation using military specifications, internal structural manuals, developing working models, etc.



Required:
*Current Active Secret Clearance
*5+ years’ experience in stress/structural analysis of aircraft using MSC or Nastran
*Good FEA, FEMAP, IDEAS (or NX/ANSA) skills.
*Knowledge of hand analysis.
*4 year Mechanical Engineering degree
 
Job Number: 549
Job Location: Orlando, FL
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Tooling Design Engineers III

Description:
STS Technical Services is now Hiring Aerospace Tooling Design Engineers III in Savannah, Georgia!

Position Summary:
Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of company aircraft.

Essential Duties & Responsibilities:
Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of company aircraft
Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures
Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers
Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures
Write complex procedures on use of tools
May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives
Additional Functions:
Actively works to improve daily processes, and ensures all work meets customer requirements
Assist Tool shop as needed, during Periodic and Conformity Inspections
Assist in formulating Tool Design policies, procedures, and specifications as required
Perform other duties as assigned

Education and Experience Requirements:
Bachelor's Degree in Mechanical Engineering (a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job)
Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment
Tool Design experience required

Benefits:
STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44493
Job Location: Savannah, GA
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Loads Engineer

Description:
General Summary:

Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods


Qualifications
Education, Work Experience, Certification and/or Licensure:
BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis; 10 years’ experience is preferred
Excellent communication skills both written and verbal
Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable

Knowledge, Skills and Abilities:
Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable
Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable
Organize, schedule and effectively coordinate work packages / phases, and lead less experienced team members in loads analysis tasks
Must be proficient in generating documentation to support certification efforts related to external loads
Knowledge of, and experience with, aeroelastic principles and concepts, including but not limited to static aeroelastic analysis including divergence and control reversal, is required
Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable
Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
Good fundamental knowledge of mass properties principles as they relate to loads analysis
Knowledge and experience with cable-driven / mass-balanced flight control systems required including limited-authority servo systems, and knowledge of, and experience with, advanced flight control architectures including full-authority actuator systems, is desirable
Strong knowledge of flight test data analysis related to structural design loads substantiation, as well as a demonstrated ability or experience with development of computational methods relating to loads analysis

The Structures Company is an AA/EOE.
 
Job Number: 239
Job Location: NC
Rate: Up to $75/Hr. *DOE*
Per Diem: Yes
Duration: 9+ Month
Start Date: October
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Store Clerks

Description:
STS Technical Services is hiring Aviation Store Clerks in Fort Lauderdale, Florida.

Job Responsibilities:

Receives and responds to material order requisitions and purchase orders to provide and or / obtain information from vendors
Determines best supply source by analyzing: best price & delivery method via Internet and media
Identifies the most cost effective product or service, and economical/reliable inbound transportation method
Identifies new vendors in order to meet required and future needs of the company
Reviews with vendor: cost, quantity, quality, delivery deadline, and schedule of payment for materials and services
Enters and updates material requests and new vendors in Quantum
Obtains proper approval authorization for purchase requisition processing, and converts material requests to purchase orders upon approval
Ensures compliance of purchase order requirements as to price, quality, quantity, delivery deadlines and compliance with policies
Faxes confirmation purchase order to vendors
Monitors and updates purchase orders with any changes as necessary in database for processing by accounts payable
Communicates with vendors & transportation companies to ensure on-time shipment/delivery
Reports on status of critical shipments and interfaces with suppliers to expedite deliveries and resolve issues
Maintains accurate records of: approvals, items ordered, and items received
Coordinates return of defective or incorrect shipments. Locates alternative sources of supplies, materials and parts
Processes rotable inventory/on-site stock/core returns to support operational functions
Completes Warranty Claim forms for Maintenance Mgr.’s approval; submits approved claim forms to Customer Support Dept. for processing
As designated by management, the Agent identifies, controls, segregates, and maintains all stock and tools to a serviceable or unserviceable category for the Hangar Floor and Stockroom
Arranges for safe and proper disposal of surplus materials
Preserves all articles or parts, while carried in the inventory, including parts that are subject to deterioration
Keeps stockroom clean and neat
Follows appropriate safety precautions and HAZMAT protocols concerning the handling of the stock, tooling, or shipments
Provides indoctrination safety instructions to colleagues handling the shipments as necessary
Locates and selects material, supplies, tools, equipment, or other articles from stored stock and issues item to technicians
Issues items to production as needed and/or requested; delivers materials to appropriate shop area using forklifts, dollies and other devices
Distributes to departments any miscellaneous technical information received by the stockroom
Initiates and tracks procurement activity based on departmental requisitions including: proper entry of all stock transactions in inventory system, and performance of inventory counts from time to time to ensure accuracy of inventory records
Prepares parts/stock usage reports for management review and action to facilitate job costing and proper asset management
Reports shipping discrepancies and damaged parts/materials to management

General Qualifications:

Previous Store Clerk experience in an aerospace environment is preferred but not required
Should be able to run reports on shipments, inventory, items ordered and items received
Must be computer savvy
A keen attention to detail is required
Must have, at minimum, a high-school diploma
A valid driver’s license is required

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38545
Job Location: Fort Lauderdale, FL
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Subsystem Lead Engineer

Description:
seeking an Avionics Subsystem Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the primary avionics, secondary avionics, pitot statics, navigation, synthetic vision, enhanced vision, communications, antennae, radar, data acquisition, safety systems, health monitoring & reporting and integrated modular avionics. The successful candidate will manage the various avionics systems design and system’s suppliers, as well as all design and certification activity required. The Avionics Subsystem Lead Engineer will work out of our Reno, NV, headquarters and report to the Director of Cockpit IPT.

Duties include, but are not limited to:
• Develop avionics systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of avionics systems
• Define requirements for the avionics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of avionics systems requirements
• Perform avionics systems tests and certification, and provide system and certification documentation
• Interface directly with avionics systems suppliers
• Manage the avionics scheduling, budget and resources
• Report subsystem status to ensure milestones are met in support of the overall program schedule

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or any former employer that would prevent you from fully performing the duties of the position
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Avionics systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing avionics systems from concept through certification strongly desired
 
Job Number: 42-005
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Bleed Air Designer

Description:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
1. Prepare 3D layout models of the BAS and VCS.
2. Prepare 3D installation and detail models of the BAS and VCS.
3. Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
1. Bachelors of Science in Aerospace or Mechanical Engineering from an accredited four year college or university program
2. Minimum 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
1. Experience using CATIA V5 to prepare 3D parametric models and 2D drawings. Minimum of 10,000 hours.
2. Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia,..)
3. Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.
 
Job Number: 28-037
Job Location: Greensboro, NC
Rate: Up to $75/hr, DOE
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Design Engineer - Bleed Air

Description:
General Summary:
The Designer for BAS/VCS is responsible for providing design expertise in support of the Bleed Air System (BAS) and Vapor Cycle System (VCS) through all phases of project schedule including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Must have experience with system layout/conceptual design of aircraft bleed air systems during conceptual/preliminary design phase Aircraft experience
• Prepare 3D installation and detail models of the BAS and VCS.
• Prepare 2D installation, assembly and detail drawings of the BAS and VCS.

Education, Work Experience, Certification and/or Licensure:
• Bachelors of Science - Aerospace or Mechanical Engineering from an accredited four year college or university program with 5+ years of directly related design experience in the development and certification of aircraft BAS and VCS.

Knowledge, Skills and Abilities:
• Experience using CATIA V5 to prepare 3D parametric models and 2D drawings.
• Knowledge of one Product Life Cycle Management Tool (e.g. Teamcenter, Enovia)
• Knowledge of 14CFR23 or 25 regulations and advisory circulars related to BAS and VCS regulations required and knowledge of Aircraft BAS and VCS.


The Structures Company is an AA/EOE.
 
Job Number: 240
Job Location: NC
Rate: $55-$60/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC MACHINIST

Description:
JSG is looking for a - Mills/Lathes to work at one of our premier Aerospace Clients in Simi Valley, CA.

Local Candidates Preferred

Position Summary:

The candidate will be required to set-up, operate, and adjust CNC machines, Lathes and/or Mills. Work from drawings and written instructions to create parts. May need to make offsets to programs on CNC Machines.

Job Responsibilities:

Responsible for all phases of part operations, maintains part conformance per sketch and drawing requirements.
Perform and maintain accurate in-process quality inspection and records.
Identify and recommend process improvements that reduce part quality variation.
Input data into visual management forms and convey results to management.
Continuously improve processes, procedures, and eliminate waste.
Qualifications

3-5 years experience operating CNC Lathes and/or Mills
Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts.
Ability to maintain close tolerances (within .0003”), hold .0003 profile, roundness.
Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma
Per ITAR requirements, must be a US Citizen or Permanent Resident Card Holder)
 
Job Number: 368084
Job Location: Simi Valley, CA
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Catia Design Engineer

Description:
Have composites and Aerospace knowledge Design structures Solidworks is a Plus
 
Job Number: 10
Job Location: East or West Coast
Rate: Open
Per Diem: Yes
Overtime: Some
Duration: 6+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ADDITIONAL TECHNICAL SUPPORT INC
Attention: Brian Ross
Address: 33 RIVERSIDE DR STE 102
City, State: PEMBROKE, MA 02359
800 Phone: 877/871-0785

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Composite Technician

Description:
Engineering Technician 1
Location: Carlsbad, CA (92008)

ACTIVE SECRET CLEARANCE required!

We are seeking an experienced Engineering Technician to specialize in composite fabrication and R&D Projects for Military Radar absorbing materials.

Qualifications include:
• Must currently hold Security Clearance in order to work on classified units alone.
• Able to perform task as per Engineering Drawings and instructions.
• Read Blue-prints and create parts.
• Use of Ovens, Autoclave, Vacuum Bagging systems, Painting (spray guns, regulators)
• Perform necessary prep work to ready parts for paint .
• Bonding hardware and inserts. Use of bonding agents, curing.
• Lay-up technician qualified-wet and pre-preg.
• Vacuum bagged, oven cured, press cured experience.
• Winding operator experience.
• QAD, WORD AND EXCEL Proficient.





Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55002
Job Location: Carlsbad, CA
Rate: $24.35
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract Specialist

Description:
Contract Specialist

Location: Charlotte, NC
Pay Rate: $38.49/hr
Duration: 7 month contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION/NO PER DIEM SPLIT**

Description:
-Bachelors degree required
-Master / Legal & Government Regulation UTC Aerospace Systems Supply Chain is currently seeking a Contract Specialist. The position duties will include the drafting, interpretation and management of contract documents in support of the Supply Chain organization.
-Such specialists will develop, review and approve processes and standard work; support the efforts of Commodity Managers and their teams in establishing contractual requirements; ensure coordination with the customer contract team; and lead the review and negotiation of the legal terms and conditions of the supplier agreements, in coordination with the Contracts and legal Department.
-This position requires expertise in drafting, understanding, negotiating, interpreting and summarizing aerospace contractual terms and conditions.
-This position also requires excellent interpersonal and supervisory skills and an ability to coordinate with exact input from a diverse, cross functional team.

Additional Job Details:
Bachelors required JD or MBA preferred
 
Job Number: 10064
Job Location: Charlotte, NC
Rate: 38.49
Per Diem: No
Overtime: Possible
Duration: 7 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Composite Aircraft Propulsion Structures

Description:
Design Engineer - Composite Aircraft Propulsion Structures
Location: Chula Vista, CA


MIN. EDUCATION: ABET Approved Bachelor Engineering: Aerospace or Mechanical


MIN. EXPERIENCE:

•8 Yrs Aerospace-Structural Designing (6 yrs with w MEng.)
•6,000 Hrs Using CATIA V5
•3 Years Designing Composite Parts with CPD or 3 Years with Fibersim


DURATION: Estimate 1-2 years











Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55265
Job Location: Chula Vista, CA
Rate: Open
Per Diem: No
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer II with PTC CREO

Description:
WHO ARE WE
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer II with CREO experience. This position will work with the engineering team and will ensure the successful integration of each design element with the product as a whole. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft structural layouts and the design of individual components, assemblies, and installations. Engineering materials will include metals, nonmetals, and composite structural materials. Tasking may also include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES

The Design Engineer II will work with minimal intervention and must rely on experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodology, to provide effective solutions to problems involving a wide number of variables.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
In-depth knowledge of standard concepts, practices, and procedures within a specified engineering field.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems of complex scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Creativity and latitude is expected.
Participate in a variety of process improvement projects.
Able to support design reviews with timely and relevant information and understanding.
Performs other duties as required.

EDUCATION AND EXPERIENCES

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 5-9 years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Must understand and apply Geometric Dimensioning and Tolerancing.
Must be proficient in PTC CREO Software.

WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/Hurst-TX/Design-Engineer-II_R0005454
 
Job Number: R0005454
Job Location: Everett-WA , San Diego-CA, Hurst-TX
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: P O BOX 19879
City, State: SAN DIEGO, CA 92159
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer III

Description:
LMI is a world-class leader in designing, building and manufacturing aerospace structures, systems and components for commercial, business and regional, and military aerospace customers. We employ engineering, manufacturing and testing experts throughout the United States and the rest of the world. Our integrated team approach and full life cycle of capabilities enable our employees to take advantage of a wide range of opportunities for career growth within our organization.

POSITION SUMMARY

We are currently seeking a Design Engineer III in Reno, NV. This position will provide onsite support to the customer and will be the liaison between the customer and offsite Engineering Services project team. This individual will be required to attend customer meetings, answer customer questions, and deliver important information to the offsite team to ensure a successful integration. This individual will work both independently as well as part of the larger engineering team. Tasks will include the development of aircraft sub-systems layouts and the design of individual components, assemblies, and installations. Tasking will include design and integration of aircraft mechanical systems, hydraulic systems, electrical systems, environmental control systems and a variety of other equipment and systems as needed.

ESSENTIAL JOB RESPONSIBILITIES for Design Engineer III in Reno, NV

The Design Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Applies standard engineering practices and techniques, including innovative methodologies, to provide effective solutions to problems involving a wide number of variables.
Review and understand customer’s Statement of Work (SOW), technical specifications, Interface Control Drawings, schedules and budgets.
Create/compile technical documentation that supports evolving/changing designs.
Able to ensure the selection and application of materials and processes are appropriate to each design element with the ability to generate and/or revise specifications when necessary.
Compose compliance matrix to meet customer specification requirements.
Assist in producing engineering quotes to specifications or customer repair demands.
Create Service Bulletins, Repair Schemes and Service Letters that meet the customers’ modifications or repair needs.
Responsible for communicating with customers and suppliers, translating technical information and ensuring compliance to standards and requirements.
In-depth knowledge of standard concepts, practices, and procedures.
Proficiency utilizing CATIA V5 engineering design software.
Works on problems that are complex in scope where analysis of situation or data requires a review of identifiable factors to determine appropriate action.
Ability to guide, mentor and advise other design engineering staff.
Provide direction and serve as expert resource to other department engineers and management team.
Function as an interface to ensure complete understanding of requirements, goals and constraints.
Document issues and communicate to necessary departments, evaluate potential problems and provide risk assessment. Follow-up to ensure that issues have been successfully resolved.
A wide degree of creativity and latitude is expected.
Participate in a variety of process improvement projects.
Will facilitate or lead teams.
Able to support design reviews with preparation and knowledgeable presentation of review material.
Directs work of others and acts as a lead.
Performs other duties as required.
EDUCATION AND EXPERIENCES for Design Engineer III in Reno, NV

Requires a BSME, BSCE, BSAE, or a Bachelor’s degree in a related engineering field and a minimum of 10+ years of experience in the Aerospace Industry or in a related field.
Requires proficiency using CATIA V5 and must be highly competent using MS Office products.
Strong leadership ability and excellent communication skills are necessary.
WHY CHOOSE LMI AEROSPACE?

We take care of our people.

401(k) retirement savings plan with a percentage company-match contribution
Competitive wages
Paid holidays
Paid time off
Medical, dental, vision, life, and accidental insurance
Short-term disability
Long-term disability
Employee assistance plan — for access to counseling, consulting and other community resources
Wellness program
Tuition assistance
Subject to eligibility, terms, and conditions

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer

COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/LMI---San-Diego---Remote-California/Design-Engineer-III_R0005438-1
 
Job Number: R0005438
Job Location: Reno, NV
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: P O BOX 19879
City, State: SAN DIEGO, CA 92159
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ECS & Pneumatic Subsystems Engineer

Description:
Seeking an ECS & Pneumatic Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Environmental Control System (ECS), Cabin Pressurization, Oxygen System, Anti-Ice System and Bleed Air Management for a supersonic business jet. The successful candidate will manage the ECS & Pneumatic systems design and system suppliers, as well as all design and certification activity required.

Duties include, but are not limited to:
• Develop ECS & Pneumatic systems design, architecture and product plans, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of ECS & Pneumatic systems
• Define requirements for the ECS & Pneumatic systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of ECS & Pneumatic systems requirements
• Perform ECS & Pneumatic systems tests and certification, and provide system and certification documentation
• Manage the ECS & Pneumatic subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of the ECS & Pneumatic resources to meet the milestones of the program schedule, from concept through certification.

Minimum Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in ECS systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing ECS systems from concept through certification strongly desired
• Must be able to demonstrate a clear understanding, knowledge and ability to define requirements, generate architecture and achieve compliance
 
Job Number: 42-001
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ELECTRONICS DESIGN ENGINEER

Description:
JSG is seeking an Electronics Design Engineer for our Aerospace Client in Glendale, CA.
LOCAL CANDIDATES ONLY - Direct Hire

Work as part of a world-class, multi-disciplinary team to develop ruggedized electronic products incorporating embedded microprocessors, and transition them into production for aerospace, military, sub-sea, and other harsh-environment applications.

Job Description:

Work from Marketing Requirements to develop electronic hardware designs incorporating embedded microprocessors responsive to the requirements, including
Product design architecture
parts and vendor selection
detailed hardware design and schematic generation and capture in PADS
preliminary parts layout for fit checks
work with PCB layout design team and PCBA vendors
work with mechanical design team
develop firmware/scripts/applications to test hardware
Debug and troubleshoot new designs
Execute functional verification of electrical subsystems
Support manufacturing for all designs including microprocessors, including
Work with Test Engineering to develop appropriate acceptance test stations in production
Troubleshoot problems in production and at customer sites
Work with Product Marketing and Business Development to prepare responses to customer Requests for Proposals
Customer specification review
Preliminary design concepts
Estimate engineering effort to execute designs and firmware/software
Preliminary bill of materials and costing
Basic Qualifications

Bachelor’s degree in Electrical Engineering, Computer Science, related filed or equivalent experience
10+ years overall experience in hardware design
High level of expertise in embedded microprocessor design and programming (C/C++, etc.)
Experience with Ethernet product design (10/100/1000BASE-T interfaces, PHYs, unmanaged switches.) 10GBASE-T interface experience a plus.
Skilled in the design and use of common I/O protocols (I2C, USB, JTAG, Ethernet).
High level of experience with hands-on troubleshooting and turn-on of new circuitry, including test bench equipment such as multi meters, DAQs, spectrum analyzers, JTAG and ICE probes, software, oscilloscopes, etc.
Experience in qualifying embedded systems to MIL-STD-810 MIL-STD-461 or IEC equivalents
Experience in failure analysis and troubleshooting skills in a production and R&D environment
Experience with prototyping solutions and bench testing methodology
Experience with test automation with background in scripting
Excellent technical writing skills and experience writing hardware, software, and interface requirements along with qualification test plans and procedures.
Able to handle ITAR data. Must be US Person or have Green Card.

Preferred Qualifications

Experience with military systems with battery charging, embedded protocol transceivers, microprocessor and FPGA-based systems
Experience with Ethernet product design and testing (Ethernet switch ICs, fiber-optic media converters, etc.)
Experience with digital video systems testing
HD-SDI, 3G-SDI, HDMI, DVI, DisplayPort
 
Job Number: 368920
Job Location: Glendale, CA.
Per Diem: No
Overtime: possible
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EMBEDDED SYSTEM ENGINEER

Description:
JSG is hiring an Embedded System Engineer for a 15+ months contract opportunity in Stratford, CT!

Description:

Ground Test Engineer - Supports, performs, and manages a specific function within a larger mechanical system, often including hardware and mechanical parts.
Responsible for projects with significant scope and complexity covering all aspects of Ground Testing helicopter components and systems.

Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems.
Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports.
Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems.

This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure.
Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight.
Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 368042
Job Location: Stratford, CT.
Per Diem: If qualified
Overtime: Possible
Duration: 15+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical EWIS Engineer

Description:
Electrical EWIS Engineer Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments and makes decisions and recommendations that are recognized as authoritative 

Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS. Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches. Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements. Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements. • Aerospace Experience is required • Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required • Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative • Knowledge of Catia V5 Electrical is required





Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs. in specific technical discipline or 15 yrs. broad Eng. experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters and 4 yrs. for PhD in fields applicable to this job. 
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer (Software Development) - (Renton)

Description:
Required qualifications:
• Electrical Engineering experience with an emphasis in software development
• Experience working with two or more of the following: web application development, mobile application development, object oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
• Experience with hardware and software configuration management
• Familiarity with and the ability to program with Visual Basic and C#
• This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.


Preferred qualifications:
• Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
• Ability to create and update drawings with Auto Cad and/or Autodesk inventor
• Experience with digital data busses such as ARINC 429/717.
• Experience with aviation connector interfaces and packing such as ARINC 600.
• Knowledge of web design and maintenance
• Experience programming PLCs and HMIs
• Experience with National instruments Lab Windows CVI.
• Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
• Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors
Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Bachelor's and 5 or more years' experience, Master's degree with 3 or more years' experience or PhD degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EERenton
Job Location: Renton, WA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power Generation and Distribution Engineer

Description:
• Electrical Power Generation and Distribution Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Electrical Power Generation and Distribution Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Electrical Power Generation and Distribution design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-007
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Subsystems Lead Engineer

Description:
Seeking an Electrical Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Electrical Power Generation System (EPGS), Electrical Power Distribution System (EPDS), Electrical Wire Interconnection Systems (EWIS) and the Science of Electrical Engineering (G&B, EMC, EMI, HIRF, LSP, etc.). The successful candidate will manage the various electrical systems design and completion partners, as well as all design and certification activity required. The Electrical Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop electrical systems design, architecture and product plan, including qualification and certification plans
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of electrical systems
• Define requirements for the electrical systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of electrical systems requirements
• Perform electrical systems tests and certification, and provide system and certification documentation
• Manage the electrical subsystem scheduling, budget, resources and suppliers
• Report subsystem status to ensure milestones are met in support of the overall program schedule
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Electrical subsystem resources to meet the milestones of the AS2 program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Electrical Engineering or other relevant Engineering position
• Master’s degree in a technical and/or management specialty preferred
• 10+ years of deep, hands-on experience in Electrical systems development, design and testing in Military, Commercial and/or business jet aircraft
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site
• In-depth and current knowledge of Part 25 regulatory requirements
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired
• Recent experience in developing electrical systems from concept through certification strongly desired
 
Job Number: 42-004
Job Location: Reno, NV
Rate: DOE, but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Packaging Engineer UG/NX NY

Description:
Request number: 5654
Job title: Electronics Packaging Engineer
Number of openings: 1

Position location: East Aurora - NY
Employment type: Contract
OT exempt: No

Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 53
Start Date: 10/22/2018
Tentative End Date: 10/21/2019

Electronics Packaging Engineer

Essential job functions:
This is a mechanical design engineering position within an EE design function. It entails the mechanical packaging of electronic circuits and related hardware.

Specific requirements are as follows:
-Experience with the packaging of electronics systems intended to be used in severe thermal and dynamic environments.
-Knowledge of materials and processes relevant to aerospace electronics.
-Experience with contemporary solid modeling tools such as Unigraphics NX.
-Knowledge of design techniques for high voltage systems
-Experience with FEM thermal and structural analysis tools such as ANSYS Workbench.
-Experience with Thermal Desktop and Icepak (nice to have)
-Knowledge of environmental test of aerospace electronics.

Education:
BS Degree preferably in Mechanical, Aeronautical or Electrical Engineering plus six years minimum of design/development engineering experience.

Masters Degree, preferably in Mechanical, Aeronautical or Electrical Engineering plus three years of design/development engineering experience.
 
Job Number: MB-5654
Job Location: East Aurora, NY
Rate: 53/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Circuit Design 5 (UVM) / Engineer experienced in Modeling and Verification CA

Description:
163608 Engineer Circuit Design 5 (UVM) (Job Number: 18020949)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Dec 17, 2018

Target End Date: Dec 13, 2019

Pay Rate: $85/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

Aerospace Systems is seeking an Engineer Circuit Design 5 based in Redondo Beach, CA. This person will join the Digital Products Department. The ideal candidate is an Engineer experienced in Modeling and Verification. This person will work on multi-million gate ASIC and FPGA developments in the areas of digital communications, signal processing, network routing, embedded processors and switching applications for air and space applications.

The responsibilities of this position include developing verification plans, architecting and implementing verification environments, writing and executing tests, and documenting verification results to support requirements selloff. Candidate must have digital verification expertise using advanced verification methodologies and techniques including constrained-random verification using System Verilog and OVM/UVM, assertions and functional coverage using PSL or SVA, and modeling using C/C++, System Verilog, or System C.


Basic Qualifications:

Bachelor's degree in a STEM discipline with a minimum 15 years of relevant

Verification using System Verilog and OVM/UVM.


Preferred Qualifications:

Mentor Questa simulator, VHDL or Verilog, PSL or SVA, C/C++, System C
 
Job Number: MB-1697
Job Location: Redondo Beach, CA
Rate: 85/hr
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Mechanical Design 3 / Catia V5 CA

Description:
163185
Engineering Mechanical Design 3 (Job Number: 18017716)

Number of Openings: 1

Location(s): United States-California-San Diego


Shift: 1st Shift

Target Start Date: Aug 30, 2018

Target End Date: Jan 25, 2019

Pay Rate: $53/hr

Work Schedule: 9/80



We are looking for a Mechanical Design Engineer for the Global Hawk program for the Equipment Installations Design Team.

This design engineering position will be responsible for the development, drafting, release and support to installation of detail aircraft components, support assemblies and equipment installation package BTPs/Drawings.

This will include both traditional 2D drawings using CATIA V5 drafting in accordance with NGC Design standard practices, fit/tolerance analysis/evaluation, design for manufacturability and coordination with other engineering disciplines of fully compliant hardware.


This designer will also develop and produce equipment installation requirement packages using 3D Model Based Definition and Functional tolerance Analysis in accordance with design standards for both secondary structure and electronic and payload equipment into the USAF Global Hawk UAS.

Basic Qualifications:
•B.S. Degree in Mechanical Engineering, Aerospace Engineering plus 5 years of experience.
•1 years experience with CATIA V5 for mechanical design
•5 years of aircraft mechanical design experience



Preferred Qualifications:
•2 years experience with aircraft equipment installations, secondary structure design and equipment packaging design
•Experience with ANSI Y14.5 GD&T for producible design.
•Experience with designing aircraft components for retrofit modification.
•Experience with military aircraft safe wire installations in accordance with SAE AS 50881
•Experience with design for human factors in accordance with MIL-STD-1472 or similar
•Experience with TeamCenter 2007, TeamCenter Unified/ CPLM
 
Job Number: MB-1684ATO
Job Location: San Diego, CA
Rate: 53/hr
Per Diem: no
Duration: 5 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Planner/Scheduler

Description:
Engineering Planner/Scheduler

Location: Palmdale, CA
Pay Rate: $48.63/hr
Duration: 2 month contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**MUST have an ACTIVE DoD SECRET CLEARANCE**

Job Description:
Develop a compliant Integrated Master Schedule, Program Summary Master Schedule and other planning artifacts in support of proposal requirements and / or for program execution. Candidate must have current program execution experience with the ability to interpret and evaluate Contract Requirements and program artifacts in order to develop an Integrated Master Schedule in conformance with Lockheed Martin Aeronautics guidance and Industry best practices. Must be an expert in the field of Planning and Scheduling who is considered an authority in regards to planning and scheduling practices, both practical and theoretical. Must be able to collaborate with the program team members and provide scheduling guidance to develop a product compliant with customer contractual requirements. Integrated Master Schedules must be developed utilizing the appropriate vertical hierarchy of visibility from IMP (if applicable) and WBS allowing for the validation of progress to meet contractual requirements.

-Will accept exp in lieu of degree.
-Aviation/Aerospace master planning experience required. (Not manufacturing, materials or maintenance planners.)
-These are high level planner schedulers for program execution.
-There is potential for long term opportunity for the right candidate.
 
Job Number: 9706
Job Location: Palmdale, CA
Rate: 48.63
Per Diem: Possible
Overtime: Possible
Duration: 2 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technical Aide

Description:
This position is responsible for assisting with simple drafting, interrogation and measurements as well as administrative tasks such as taking technical notes during meetings and release of drawings.

Previous experience in an administrative role in an aircraft or aerospace setting and strong MS Office skills. Prior CATIA experience is preferred.
 
Job Number: 918150
Job Location: Wichita, KS
Rate: 18-25 hourly
Per Diem: yes
Overtime: possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: HI-TEC PROFESSIONAL SOLUTIONS INC
Attention: Anne Cameron
Address: P O BOX 965280
2886 SANDY PLAINS RD

City, State: MARIETTA, GA 30066
Phone: 770/575-5855
Fax Phone: 770/575-5856
Website: www.hi-tecsolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Entry Mechanical Design Engineer Creo (202)

Description:
This is a full time, 1 year contract located in York, PA*



We are recruiting for an entry level contract Mechanical Design Engineer who has fundamental knowledge of aerospace/DoD mechanical designing using Pro/E Creo.



Much of the work may be in mechanical and parts design, preparing items for machining and fabrication, welding, and assembly. A good knowledge of manufacturing processes will be used daily on manufacturing site.



Required:

*1-2 years’ experience in military/aerospace mechanical design using Pro/E Creo.
*Familiar with GD&T (ASME 14.5-2009)

*Able to work with some electrical as well as mechanical parts

*Able to work with Excel and creating large spreadsheets.

*Experience creating and reading engineering drawings, schematics.
*4 year engineering degree, or 4-5 years designing experience in lieu of degree



Pluses:

*Vehicle designing experience a plus
 
Job Number: 202
Job Location: York, PA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Safety Engineer MIL-STD 882 (117)

Description:
*This is a full time, 10 month contract, located in Grande Prairie, TX*



We are hiring for a contract early career Safety Engineer who will ensure products sold to customers are safe for use. The responsibilities will be to conduct preliminary, system hazard, subsystem, operating and functional Hazard and Fault Tree Analysis per MIL-STD-882.



Daily work may include developing system safety for environmental compliance, prohibited materials, hazardous materials management, pollution prevention, risk assessment, hazard tracking database Flow downs to suppliers, audits, recommend safety features and controls for system design, software, training and procedures to mitigate or eliminate hazards.



Required
*2-3 years’ experience in Manufacturing Safety in an aerospace or defense subcontracting capacity; experience with MIL-STD 882.
*US Citizens only, will apply and gain a clearance upon starting.
*Experience conducting System Safety designing, audits, testing and verification.
*Candidate must be willing to work overtime and travel as needed.

*Engineering Degree



Pluses:

*Active Secret Clearance
*Vehicle or weapons familiarity.
*Experience implementing a software safety program in accordance with AR 385-17 or equivalent.
*Ability to manage subcontractors in Safety field of expertise.

*Experience in preparing software system safety documentation and presenting safety case to the SSSTRP or equivalent safety boards
*Knowledge of Human Factors, or Reliability and Maintainability engineering; Hazmat knowledge
*Experience supporting Government conducted tests and providing Safety analysis of test incidents.
 
Job Number: 117
Job Location: Grande Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Designer 4

Description:
Equipment & Tool Designer 4

Location: Everett, WA
Duration: 6 Months

Description:
Leads the development of highly complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements. Leads design reviews, design requirement collection, drawing creation and revision. Researches the application of robotics, automation and new technology to support the build plan. Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling. Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Establishes and validates spares requirements. Leads the implementation of best practices into functional process documentation to drive standard work. Oversees the development and documentation of equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training. Provides technical direction to support engineering changes and discrepancy resolution. Oversees the maintenance of hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.

Education / Experience:
AA degree in related discipline and typically 6 or more years of related experience or an equivalent combination of education and experience.

Skill Code:
66W-Tech Designer

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-17051
Job Location: Everett,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/234-6123
800 Phone: 866/914-9724
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer

Description:
Equipment & Tool Engineer 4
 
Location: Everett, WA
Duration: 6 months
 
Job Description:        
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets. Must have some PLC Programming and Siemens Platform knowledge.
 
Education / Experience:
Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Skill Code:
66U-Designer Engineer
 
Job Number: 18-18490
Job Location: Everett, WA
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 11/12/18
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 859 STEPHENSON HWY
City, State: TROY, MI 48083
Phone: 843/955-9221
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer 3

Description:
Equipment & Tool Engineer 3

Location: Renton, WA
Duration: 6 months

Description:
Required qualifications:
- Electrical Engineering experience with an emphasis in software development
- Experience working with two or more of the following: web application development, mobile application development, object-oriented design and analysis, networking, unit testing, systems administration, and/or developing large software systems
- Experience with hardware and software configuration management
- Familiarity with and the ability to program with Visual Basic and C#

Typical Education & Experience:
Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctor of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.

Preferred qualifications:
- Critical technical skills include proficiency in airplane digital signals and low voltage data acquisition
- Ability to create and update drawings with Auto Cad and/or Autodesk inventor
- Experience with digital data busses such as ARINC 429/717.
- Experience with aviation connector interfaces and packing such as ARINC 600.
- Knowledge of web design and maintenance
- Experience programming PLCs and HMIs
- Experience with National instruments Lab Windows CVI.
- Experience with equipment configuration control through Version Description Documents and/or Equipment Documents
- Experience using aviation interfaces such as synchros, resolvers, Linear Variable Displacement Transducers (LVDTs) and variable reluctance proximity sensors

Bachelor of Science degree in one of the following areas is highly preferred
Aeronautical Engineering
Aeronautics & Astronautics Engineering
Aeronautical Engineering Technology
Chemical Engineering
Civil Engineering
Aerospace Engineering
Electrical Engineering Technology
Manufacturing Engineering
Manufacturing Engineering Technology
Mechanical Engineering
Manufacturing Systems Engineering
Material Sciences and Engineering
Industrial & Systems Engineering
Mechanical Engineering Technology
Electrical Engineering
Metallurgical and Materials Engineering
Plastics Engineering
Plastics Engineering Technology
Structural Engineering

Skill Code:
66U-Designer Engineer.

Please share updated resume at ravi@iconma.com if interested.
 
Job Number: 18-17824
Job Location: Renton,, WA
Per Diem: Available
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Ravi Kumar
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer II - (Sylmar, CA)

Description:
- Design solar panels, solar panel components, and associated support tooling in AutoCAD / Inventor Pro Suite. Also
design and update searchlight and high intensity illumination products for solar cell and solar panel test in AutoCAD /
Inventor Pro Suite.
- Work closely with Panel Product Engineers to translate customer schematics and specifications into manufacturing
efficient panel layouts and detailed manufacturing drawings, inclusive of Bill of Materials (BOMs), detail views, wiring
lists, schematics, and notes. Participate in round-table drawing reviews and CAD-check of drawings generated by others.
Generate soft tooling files from AutoCAD model. Learn to generate and check photomask drawings.
- Work with Illuminations Systems Product Engineers to generate and update part and assembly documentation needed
for procurement, manufacturing and assembly, including generation of 3D models, verification of model tolerances, and
model management in VAULT.
Work with Product and Process Engineers to identify and define the manufacturing support tooling necessary to safely
build and test the hardware in conformance with customer requirements. Generate tooling procurement and assembly
drawings and models using AutoCAD/Inventor Pro Suite.
- Support proposal and design trade efforts by providing rapid assessment of potential layout options. Assess
customer ICDs for manufacturability and provide feedback/improvement suggestions to enhance compliance and/or
manufacturability. Participate in LEAN improvement initiatives from both manufacturing and engineering perspective.
Continually advance ideas for streamlining both design/documentation and manufacturing processes by applying DFMAT
principles to all generated and reviewed deliverable hardware and manufacturing/support tool designs.
- Apply GD&T principles to assure manufacturability for internally built assemblies and to help resolve procurement
issues.
- Use Finite Element Analysis to support new design development and Root Cause investigations. Use Inventor CFD tool
to assess thermal and mechanical stress on deliverable hardware and to assess factors of safety for assembly/ground
support tooling.
- Assist Product Engineering in preparation of program SDRL documentation, including parts and material lists, mass
analysis, magnetic moment analysis, and detailed design descriptions for internal and customer review packages. Learn
to perform radiation and power analysis and to generate handling procedures and hardware test reports to backfill as
needed during periods of high volume activity.
Qualifications - Internal
Basic Qualifications
- Proficiency in 2D and 3D CAD modeling using AutoCAD/Inventor Pro Suite 11 (or higher), including:
- Use of block part libraries
- Generation of multilayer drawing packages, detailed assembly views, and schematics
- Familiarity with AutoDesk Vault
- Demonstrated working knowledge of basic GD&T principles
- Working knowledge of Finite Element Analysis techniques, preferably using Inventor Pro Suite Analysis package
(including definition of model, mesh, and boundary conditions and interpretation/presentation of the results)
- Ability to read/generate electrical schematics
- Experience with PCBs or other electronics packaging and wiring design
- Ability to communicate effectively with a diverse group of both internal and external customers and colleague
Preferred Knowledge / Skills
- Familiarity with VBA, SQL, or Labview
- Familiarity with basic physics of solar cells, photolithographic processes, Aerospace materials and assembly techniques,
PCBs and electronics, FEA and FMECA analysis techniques
- Ability to compile and present data using Excel and PowerPoint, and to generate/update procedural documentation using
MS Word
Typical Education / Experience
Degree and typical experience in engineering classification: Bachelor's and 2 or more years' experience or a Master's
degree with experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in
engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required,
accreditation standard.
 
Job Number: EquipToolECA
Job Location: Sylmar, CA
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Equipment & Tool Engineer III & IV - (Charleston, SC)

Description:
Develops program and project requirements, develops highly complex equipment and tooling concepts and designs solutions, including alternatives for the Production System. Validates analysis of technical data, influences product engineering design and makes robotics, automation or technical recommendations to support production system integration for a aerospace products. Assists with developing multiple tool and equipment concepts utilizing alternative resources to rapid prototyping tooling solutions. Leads the creation and modification of equipment and tooling definition at the program level. Executes project plans, provides input to Make/Buy decisions and partners with Procurement to meet program schedule, cost and quality targets. Ensures compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements. Leads gated reviews and develops plans for production readiness, preventative maintenance and spares. Validates contractual performance milestones. Develops and implements work-arounds and maintains configuration of hardware, software and documentation. Conducts studies and make recommendation for disposition of assets.

Degree and typical experience in engineering classification: Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry. ABET is the preferred, although not required, accreditation standard.
 
Job Number: EquipToolESC
Job Location: Charleston, SC
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Vibhas Sadhu
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
External Loads Engineer

Description:
Responsible for determination of flight and ground static and fatigue loads of airframe components, assemblies and systems, to ensure aircraft design is structurally sound and meets all regulatory and company requirements related to structural strength and fatigue.

Duties and Responsibilities:
Applicant must be able to define and validate aircraft flight and ground loads through simulation/calculation using established theory and methods.

Education, Work Experience, Certification and/or Licensure:
1. BS degree in Aeronautical, Aerospace or Mechanical Engineering required, MS degree or PhD in Aeronautical or Aerospace Engineering is preferred
2. Applicant shall possess a minimum of 6 years’ experience in aircraft external Loads analysis with preferably 10 years’ experience
3. Excellent communication skills both written and verbal
4. Experience and demonstrated proficiency in Unix/Linux, FORTRAN, C/C++, MATLAB, VBA, MSC/NASTRAN, MSC/PATRAN, MSC/FLIGHTLOADS is required. Python experience and/or proficiency is desirable.

Knowledge, Skills and Abilities:
1. Knowledge of static maneuvers, static ground, control surface component loads, component pressure loads development, and ground support equipment loads, along with experience in dynamic loads, such as tuned gust, PSD, equipment design accelerations, and dynamic landing loads per FAR/EASA requirements. Experience with turbine engine fan blade out, emergency landing loads per FAR/EASA requirements, as well as flutter and vibratory analysis, is desirable.
2. Knowledge of, and experience with, FAA FAR 23 and EASA CS 23 Loads regulatory requirements and means of compliance is required, and experience with FAA FAR 25 and EASA CS 25 Loads regulatory requirements and means of compliance is desirable.
3. Must be proficient in generating documentation to support certification efforts related to external loads.
4. Knowledge of, and experience with, dynamic aeroelastic analysis is desirable. Demonstrated knowledge of FEA and doublet-lattice aero modeling techniques, particularly in MSC/NASTRAN, is desirable.
5. Strong knowledge of CFD principles and CFD-based modeling, along with wind tunnel test data usage for Loads analysis, is required. Applicant must be able to communicate aerodynamic, structures and systems discipline input needs to ensure accurate load set development and conveyance.
 
Job Number: 28-031
Job Location: Greensboro, NC
Rate: $70-$75/hr
Per Diem: YES
Overtime: YES
Duration: 1 YR+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA / DSP Design Engineer w/ ASIC (584)

Description:
*These are full time, 1 year contract positions, located in Orlando*


We seek a hands-on ASIC FPGA/DSP Design Engineer to design electronic circuits. Will be responsible for component selection, evaluation, test box design, prototype creation and checkout along with digital and analog analysis. Engineer will design and develop evaluation boards and test methodologies/interface hardware required to evaluate the design through systems integration, test and final device design and customer approval.



Required:
*6+ years’ experience for level 3, conducting firmware digital design engineering using FPGA/DSP or 11 years experience for Level 4 job.
*Familiar with video system design, synchronization, image processing operations and display formats.
*Active Secret Clearance

*On site work only, no remote work possible for this position.
*BSEE



Pluses:
*Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets.
*Familiar with Xilinx, Altera Part family internal FPGA fabric and IP and model based compilers

*Aerospace design experience
 
Job Number: 584
Job Location: Orlando, FL
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Verification Engineer (513)

Description:
*This is a full time, 1 year contract position, located in Grand Prairie, TX*



We seek a hands-on FPGA/ASIC Design Verification Engineer to analyze and review requirements, test plans, verification implementation and documentation generation. Job is to ensure the proper qualification of safety-critical hardware used in aerospace applications.



Required:
*5 years’ firmware verification design requirements.
*Background in FPGA design verification using SystemVerilog.
*Familiar with DO-254 or nuclear regulatory processes.
*Able to manage outside contractors/venders.
*BSEE or equivalent engineering degree.



Pluses:
*Knowledge of Constrained Random Testing, Code Coverage or Clock Domain Crossing.
*ASIC knowledge
 
Job Number: 513
Job Location: Grande Prairie, TX
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Firmware Design Engineer- FPGA (381)

Description:
*This is a full time, 1 year contract position, located in Orlando*

*Must be able to gain a Secret Clearance in order to apply*



We seek a hands-on FPGA/ASIC Design Engineer to design electronic circuits. Will be responsible for designing the digital communication and BIT (build in test) for an electro-explosive controller (EED) circuit card assembly which uses a FPGA and the associated development tools.

Day to day duties will include conducting trade studies, development and release of design requirement specification for the EED circuit card assembly, parts selection and generation of parts list, schematic capture of design, circuit simulation using Synopsys tools, support EPCAD PWB development and piece part layout, coordinate design with MFC SME and present design through design assurance reviews. Engineer will design and develop evaluation boards and test interface hardware required to evaluate the design through systems integration and test.

Required:
*6+ years’ firmware digital design engineering using FPGA/ASIC for level 3 job or 11 years experience for Level 4 job.
*Experience working with DSP

*Familiar with video system design, synchronization, image processing operations and display formats.
*Must be able to get a Secret Clearance, which requires US Citizenship in order to apply.
*On site work only, no remote work possible for this position.
*BSEE



Pluses:
*Experience with Verilog, C/C++, MathLab/Simulink, System Verilog languages; Synopsis Synplify, Synopsis VCS, NCSim, ChipScope tool sets
*Experience with Xilinx and Altera Part family internal FPGA fabric and IP and model based compilers desired.
*Aerospace design experience
 
Job Number: 381
Job Location: Orlando, FL
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
First Article Inspection Reviewer

Description:
Location: Chula Vista, CA
Rate: $38.59/HR
Duration: 1 year contract
Shift: 1st Shift
OT: Possible
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****
****Must have FAI documentation and review experience with AS9102****

Job Description
- Coordinate, schedule & review FAI package submissions
- Understanding of hand measuring tools
- Familiar with inspection techniques
- Experience with reading and interpreting quality procedures to include AS9100 & AS9102
- Experience delivering training

Requirements:
- Bachelor's Degree
- Aerospace experience preferred
- Quality role/experience in manufacturing environment
- Basic excel knowledge
- Basic project management experience
 
Job Number: 9959
Job Location: Chula Vista, CA
Rate: $38.59/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control System Engineer

Description:
Role Description:



We are searching for a talented person to fill a Flight Control Engineer position located here in Moses Lake, WA. The strategic purpose of the Flight Sciences Group, and the Engineering Services Unit, is to provide engineering consulting services related to aircraft performance.



Job Duties and Responsibilities:

Review and support Certification activities.
Certification Plans.
Component Qualification Test Plans.
Similarity Analysis Reports.
Safety and Particular Risk Analysis.
Design Reviews.
Support flight testing activities.
Test Specification Definition.
Test planning and preparation activities.
Pre and Post Flight Briefing Support.
Live monitoring of flight data, typically via telemetry, exceptionally on aircraft.
Post flight data processing, analysis, and drawing conclusions.
Troubleshooting of aircraft snags, root cause determination and appropriate engineering disposition for way forward.
Appropriate disposition of non-conformances, quality escapes etc.
Safety of Flight determination.
Documentation of design problems for long term fix.
Release of engineering documentation for component changes and new installations, ensuring appropriate configuration control.
Generation and review of appropriate limitations documentation.
Flight Test Report Writing.




Requirements
Knowledge/Skills/Abilities

Intermediate knowledge of flight test operations and flight certification.
Professional mannerisms, appearance and actions (self-confident and committed to high ethics).
Strong organizational, time management and prioritization skills:
Able to multi-task, maintain focus on several different projects at one time and hit deadlines.
Able to be flexible with attention and priority.
Able to work in a progressive, fast-paced environment (work well under pressure).
Strong analytical and troubleshooting skills as well as decision-making skills.
Strong interpersonal skills, with the ability to build strong relationships at all levels. Ability to influence others as well as relate to individuals at all levels of the organization.
Strong communication skills (oral, written, presentation) with both external and internal customers:
Act as an active listener, seeking to understand and then to be understood, articulating clearly and confidently.
Uses people relationship and business management skills to make decisions on what and when to communicate with employees.
Able to publicly represent the organization to people who inquire about our company, our mission and our products (straight-forward, believable).
Strong project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Computer Skills: Comfortable and effective working in Microsoft Office. Proficiency with Microsoft Project and/or other project planning software. Able to quickly learn new software and systems.
Software programming
Education

Four (4) year degree in Engineering (Electrical, Aerospace, Instrumentation, Avionics).
Experience

3-8 years relevant aerospace engineering experience
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Claderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Fuel Systems Engineer

Description:
• Responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Fuel Systems Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Fuel Systems design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-008
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Full Time Mid-Level Design Engineer - Composites

Description:
Design Engineer Composites
Location: West Lafayette, IN
Direct, full time position


Job Description:

Seeking Design Engineers to perform mechanical design and drafting tasks including composite part design. Qualifications include:
•Experience with surfacing, solid modeling, and drafting
•CAD Software: CATIA V5
•Primary / Secondary Structural Design experience including sheet metal, machined and composite parts
•Experience using Composites workbench (CPD) for CATIA V5
•Composite Tooling (molds, trim tools) design preferred
•Experience with GD&T preferred
•Aerospace experience preferred




Min years of experience: preferred 3 yrs minimum including experience with composites design

Degree Requirements: BS in Engineering or Engineering Technology




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55310
Job Location: IN, AL, CT
Rate: Negotiable
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulics Subsystem Lead Engineer

Description:
Seeking an Hydraulics Subsystem Lead Engineer with strong experience enabling him/her to be responsible for all activities related to the design, development, integration, testing and certification of the Hydraulics system for the a supersonic business jet. The successful candidate will manage the hydraulics systems design and completion partners, as well as all design and certification activity required. The Hydraulics Subsystem Lead Engineer will report to the Director of Subsystems IPT.

Duties include, but are not limited to:
• Develop hydraulics systems design, architecture and product plan, including qualification and certification plans.
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of hydraulics systems
• Define requirements for the hydraulics systems to ensure compliance with regulations and customer requirements
• Provide validation and verification of hydraulics systems requirements
• Perform hydraulics systems tests and certification, and provide system and certification documentation
• Manage the Hydraulics subsystem scheduling, budget, resources and suppliers
• Will be responsible for hiring, developing and leading talent to augment and seamlessly integrate with our world-class team and liaise effectively with our technical support partners.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort. She/he will prioritize the allocation of the Hydraulics subsystem resources to meet the milestones of the program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure / confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position.
• Master’s degree in a technical and/or management specialty preferred.
• 10+ years of deep, hands-on experience in Hydraulic systems development, design and testing in Military, Commercial and/or business jet aircraft.
• 3+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired.
• Recent experience in developing hydraulic systems from concept through certification strongly desired.
 
Job Number: 42-002
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
International Trade Compliance Site Support

Description:
International Trade Compliance Site Support

Location: Fort Worth, TX
Pay Rate: $48.27/hr
Duration: 12 month W2 contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Position Responsibilities:
•Provide guidance to site functional teams regarding visitor management, technology marking, technology transmission methods, reporting and other administrative requirements for export compliance.
•Administration of the visitor management system to include, visitor approvals, adherence to visitor policies and procedures, follow-up on required host training, and screening of visitors as needed.
•Assist site in compliant transfers of technical data by assigning jurisdiction & classification and providing guidance on export markings and approved transfer methods
•Support site logistics by creating Automated Export System (AES) Filings and Delivery without reference documents for hardware in SAP
•Coordinate site input to support C360 Management Reports

*Education / Certifications
Bachelor Degree required
*Experience / Qualifications
Required:
•1-3 years of experience in US Export and Customs laws and regulations
•Knowledge of ITAR (Intl Traffic and Arms Regulations)
•Knowledge of Export Administration Regulations (EAR)
•Proficient in Microsoft Office, Word, Excel, and PowerPoint

Preferred:
•Licensed Customs Broker
•Experience in the Technology/Software related to the Aerospace industry, a plus.
 
Job Number: 9985
Job Location: Fort Worth, TX
Rate: 48.27
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
JR. MANUFACTURING ENGINEER

Description:
Johnson Service Group (JSG) has teamed up with a leader in the aerospace, defense and commercial markets. Our client is seeking a talented Jr. Manufacturing Engineer to provide manufacturing expertise to solve complex challenges, and to implement process and product improvements.

Scope of Experience and Responsibilities:

1-3 years+ of experience in an electro-mechanical assembly, test, or machine shop (CNC/NC) environment.
Experience in the aerospace, and/or military industry is a plus.
Background in E/M or hydraulic actuation systems is a plus but not required.
Knowledge of PFMEA, Six Sigma and Lean Manufacturing.
Experience in MRB material (NCR processing) is a plus.
Provide technical solutions to address manufacturing issues
Support new capital equipment purchases and manufacturing implementation
Participate in process improvements on a project level.
Support manufacturing with implementing complex engineering improvements and solutions.
Adhere to Quality System requirements and support process audits.
Initiate and support Process Flow Charts, PFMEA, and Control Plans.
Experience with Project Planning tools, such as MS Project, is a plus.
Strong troubleshooting and problem-solving skills.
Excellent verbal and written communication skills are required.
Education/Training:

Bachelor of Science Degree in an Engineering, Aerospace or a related technical discipline is required
Six Sigma Green Belt is a plus
Duration: Up to 6 months

Location: Duarte, CA area
 
Job Number: 369540
Job Location: Duarte, CA
Per Diem: If Qualified
Overtime: Possible
Duration: 6 months +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Landing Gear Engineer

Description:
• Landing Gear Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Landing Gear Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Landing Gear design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-009
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MANUFACTURING PROCESS ENGINEERS

Description:
Johnson Service Group (JSG) has teamed up with a leader in the aerospace, defense and commercial markets.
Our client is seeking talented Manufacturing / Process Engineers to provide manufacturing expertise to solve complex challenges, and to implement process and product improvements.

Scope of Experience and Responsibilities:

2-5 years+ of experience in an electro-mechanical assembly, test, or machine shop (CNC/NC) environment.
Experience in the commercial, aerospace, and/or military industry.
Background in E/M or hydraulic actuation systems is a plus but not required.
Controls engineering experience is a plus.
Strong knowledge of PFMEA, Six Sigma and Lean Manufacturing.
Must have participated in MRB material (NCR processing).
Provide technical solutions to address manufacturing issues
Support new capital equipment purchases and manufacturing implementation
Participate in process improvements on a project level.
Support manufacturing with implementing complex engineering improvements and solutions.
Adhere to Quality System requirements and support process audits.
Initiate and support Process Flow Charts, PFMEA, and Control Plans.
Experience with Project Planning tools, such as MS Project, is a plus.
Strong troubleshooting and problem-solving skills.
Excellent verbal and written communication skills are required.
Education/Training:

Bachelor of Science Degree in an Engineering, Aerospace or a related technical discipline is required
Six Sigma Green Belt is a plus
Start Date: As soon as possible

Duration: 3-6+ month contract position

Location: Ft. Collins, CA
 
Job Number: 368123
Job Location: FORT COLLINS, CO.
Per Diem: If qualified
Overtime: Possible
Duration: 3-6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda J Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer

Description:
Materials Review Board (MRB) Engineer
Location: Foley, AL
12+ month contract





The Materials Review Board (MRB) Engineer will consider many aspects that would apply to the discrepant component, for example: functional interface, structural integrity, metallurgical and mechanical properties, aerodynamics, future operator and maintenance requirements, weight impact, cosmetic appearance, etc. Evaluate nonconforming material for acceptability and reparability to ensure flight-worthiness of the components. The MRB Engineer will provide written disposition of the hardware. In instances where the nonconformance is unacceptable and the component cannot be used as-is, the MRB Engineer will provide written rework or repair instructions necessary to rectify the noncompliant condition and return the component for a serviceable condition. All rework or repair instructions will be detailed and must include the necessary inspection methods and acceptance criteria. The engineer will coordinate and seek consultation with various subject matter experts.


Primary Responsibilities:
• Evaluate nonconforming metallic structures components for acceptability and reparability to ensure flight worthiness of the components.
• Evaluate nonconformance for impact on component performance, functionality, service life, maintainability and various other possibilities.
• When acceptance of the nonconformance is not possible, develop a potential repair scheme and evaluate the repaired component for potential impact on component performance, functionality, service life, maintainability and various other possibilities.
• Development of a repair should minimize risk to the component and minimally invasive and within the capability of the production area accomplishing the repair.
• Repair dispositions must ensure component integrity and customer requirements are satisfied when the repair is accomplished as intended.
• Consult with various subject matter experts including potential customer interaction addressing the nonconformance and proposed disposition.
• Work with Production personnel such as Manufacturing Engineering to ensure repair disposition is understood, is feasible and can be accomplished as intended.
• Assist Production areas in the determination of root cause and potential corrective actions to prevent nonconformance.
• Work with team members to analyze nonconformance trend data, ensure the problem is understood, assist in developing and implementing corrective actions.


MRB Engineering experience required. Potential 'split' shift responsibilities. Bachelor's Degree required.

Experience/Qualifications Required:
• Prior experience with aircraft design, manufacturing, assembly or repair as an MRB engineer Preferred:
• Logical problem solver who is organized and detail oriented • Ability to evaluate and make technical decisions with little outside input
• Good written and verbal communication skills and the ability to work well in a team environment
• Demonstrated ability to interpret engineering drawings and models (2D and 3D) and knows GD&T
• Good understanding of computing tools and programs including the use of Microsoft Office
• Familiar with PLM and ERP systems such as Teamcenter and SAP Familiar with many types of aircraft structure materials and fabrication processes



Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54673
Job Location: Foley, AL
Rate: 60.00
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MRB Engineer - Systems or Structures

Description:
The Engineer for Liaison/MRB reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action required for mechanical systems

Duties and Responsibilities:
• Resolves complex engineering problems related to the build of the aircraft
• Reviews defects and establishes root cause, provides an acceptable disposition to repair the discrepant condition using engineering principles and determines if a corrective action is required
• Reviews Engineering documentation (drawings, test procedures, and discrepancy tags) to enable technicians to understand the documents and continue working
• Reviews, develops, and implements revised/new processes using six sigma/lean principles
• Provides an acceptable disposition of non-conformance of commercial mechanical systems or structures encountered during Manufacturing/Assembly process and production, including reporting of failures, malfunctions, and defects
• Documents how to repair the discrepancy using engineering principles
• Assists in determining if defects are Engineering related or workmanship issues. Documents defect findings
• Ensures that the proposed repair is equivalent to the Blueprint design or will not affect systems functionality
• Incorporate design changes using CATIA V5

Qualifications
Education, Work Experience, Certification and/or Licensure:
• Bachelor's degree in Engineering or related field of study
• 6 years’ experience serving as a Liaison for MRB Structures is required
• Computer proficient with experience in Microsoft Office Programs (SAP a plus)
• Excellent written and oral communication skills

Knowledge, Skills and Abilities:
• Experience with MRB design, or repair of structures
• Knowledge of corrosion prevention
• Knowledge of non-destructive testing
• Advanced knowledge of Aircraft Structures or Systems
• CATIA V5, and Standard Repair Methods (SRM)
• Extensive experience with Six Sigma

The Structures Company is an AA/EOE.
 
Job Number: 245
Rate: $55/HR
Per Diem: Yes
Overtime: Yes
Duration: 12+ Months
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machinist

Description:
Job Description:
With direct guidance in a team environment, responsible for operating one or more production machines working from blueprints, sketches, and route sheets. Contributes to lean initiatives to increase productivity and reduce costs.

Duties and Responsibilities:
1. 0 - 1 year general or related machining experience, or demonstrated ability to perform described responsibilities. 2. Able to read and follow blueprints, specifications, and verbal instructions. 3. Has working knowledge of machine shop mathematics, may include trigonometry. 4. Effectively applies lean initiatives. 5. Demonstrates effective verbal, written, and interpersonal communication skills, as well as the ability to work in a team environment. 6. Interprets reports and uses job specific software applications. Able to use employee self-service systems to access on-line information and use specialized automated systems (i.e., PMR, TORS, e-mail).

Additional/Special Skills requested:
With emphasis on EDM, wire or sinker, Hone, Lap, and Cylindrical Grinding, Temporary Control Valve / EHSV: - 0-1 year general mechanical work experience, with emphasis on Micro De burr, Lap, and Cylindrical and Center less grinding and or 0-1 year experience with Pressurized Hydraulic Systems. Lathe, Mill, etc.

Preferred Skills: AEROSPACE MACHINING -
 
Job Number: 44017
Job Location: Ogden, UT
Rate: 18.00 - 25.00
Overtime: Yes
Duration: Direct
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Dawn Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II - Composites

Description:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

UNIQUE SKILLS
• Preferred candidate must have composite material structure manufacturing or aerospace manufacturing assembly experience.
• Solumina and/or Catia experience desirable.

EDUCATION AND EXPERIENCE REQUIREMENTS
• Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Eighteen months Manufacturing Engineering, planning, or related technical experience.

REQUIREMENTS
• Proven knowledge of Lean and/or Six Sigma principles.
• Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math.
• Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc.
• Lean Six Sigma Greenbelt Certification or higher preferred.

ESSENTIAL FUNCTIONS
• Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components).
• Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems.
• Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements.
• Investigate and assist in preparing justification for equipment and facility requests.
• Perform producibility studies from engineering drawings.
• Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed.
• Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures.
• Incorporate Lean Manufacturing Methodology into existing and future processes.
• Utilize CADAM/CATIA data and nesting software to generate flat patterns, Master Models, NC data, and ply nests to meet Engineering and Manufacturing requirements.
• Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader.
• Support all Safety, Sustainability and Ergonomic Initiatives.
• Aid in development and maintenance of Business Continuity Plan.
• Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality.
• Initiate and maintain accurate daily/weekly activity status based on work output, as required.
 
Job Number: 24-292
Job Location: Savannah, FL
Rate: $50
Per Diem: Yes
Overtime: Yes
Duration: 1 Year Plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing or Process Engineer (169)

Description:
*This is a full time, 1 year, contract position based in Lexington, MA*



We are hiring for a shop floor manufacturing engineer who has some background in electronics or mechanical assembly.



Candidate will directly work with floor technicians and operators to resolve line issues and develop and improve process instructions, route cards, tooling, methods, and processes necessary to meet our production quality, delivery, and cost objectives.



Typical daily duties may include working with assemblers, testers, and inspectors as well as with design engineering to solve a variety of simple to complex manufacturing problems. Will work on capacity planning, production floor layouts, help with capital equipment requirements forecasting, develop ROI analysis, continuous improvement edicts, root cause analysis, value steam mapping, performance metrics, etc.



Required:
*5 years’ experience working as a manufacturing or process engineer in aerospace or defense manufacturing.
*Experience utilizing Oracle, PDM, TipQA, Shop-floor and similar floor operating systems.
*Understanding of LEAN Manufacturing principals
*Familiar with 7-S and Continuous Improvement (AS9100 or similar)
*Strong electrical test knowledge
*4 year engineering or equivalent degree (BSME or BSEE preferred)
*Able to get a Secret Clearance upon starting, must be a US Citizen (we help with this process)



Preferred:
*Active Secret Clearance
*Bonding experience
*High speed signals, fiber optics, high voltages and energetic device knowledge
 
Job Number: 169
Job Location: Lexington, MA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Program Manager

Description:
Location: Canoga Park, CA
Rate: $50.00 - $58.50/HR
Duration: 6 month contract
Schedule: Regular 40 hour work week. OT possible
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** 75% travel mostly within Southern California with some national travel**

Duties:
-The Materiel Program Manager Specialist will be responsible for managing the performance of suppliers supporting various Programs.
-This candidate will interface with procurement and the engineering community to drive resolution of technical, schedule, and administrative materiel issues.
-The candidate will be responsible for effectively identifying supplier delivery issues, developing performance improvement strategies, and leading the implementation to support program needs and timely material delivery.
-This position requires frequent travel to various suppliers across the country supporting -This candidate will utilize their background and expertise to communicate between team members, customer counterparts, and suppliers, to provide assurance that the hardware is compliant to purchase order requirements.
-Furthermore, the candidate will be responsible for developing strategic plans to manage the performance of the supplier and integrating the aforementioned team members to successfully execute the plan.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.
60% - Manage supplier quality and delivery performance, identify delivery issues and coordinate solutions with suppliers, procurement, and engineering. Lead all reviews with suppliers.
30% - Drive corrective and preventative action activity at the supplier, and provide corrective action support to manage timely and effective issue resolution and control.
10% - Act as primary SCMM (Supply Chain/Materiel Management) interface for customer and management meetings at supplier locations.

Skills:
-Excellent written and oral communication skills required.
-Must be willing and able to travel on a regular basis to support supplier performance and program office delivery requirements.
- Knowledge of Supply Chain practices, procedures and MRP/ERP systems expected.
-The candidate should have a minimum basic understanding of typical aerospace processes (machining, welding, NDT, etc) and how they are applied to the hardware being manufactured.
-This job will require extensive travel – a minimum of 75% travel
-Knowledge of Oracle ERP systems desired

Education:
-Requires a Bachelor’s degree and ten (10) years of directly related experience or an equivalent combination of education and experience.
 
Job Number: 10034
Job Location: Canoga Park, CA
Rate: $50.00 - $58.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Materials Review Board (MRB) Engineer

Description:
Location: Foley, AL
Rate: $60.00/HR
Duration: 1 year W2 contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- The Materials Review Board (MRB) Engineer will consider many aspects that would apply to the discrepant component, for example: functional interface, structural integrity, metallurgical and mechanical properties, aerodynamics, future operator and maintenance requirements, weight impact, cosmetic appearance, etc.
- Evaluate nonconforming material for acceptability and reparability to ensure flight-worthiness of the components.
- The MRB Engineer will provide written disposition of the hardware.
- In instances where the nonconformance is unacceptable and the component cannot be used as-is, the MRB Engineer will provide written rework or repair instructions necessary to rectify the noncompliant condition and return the component for a serviceable condition.
- All rework or repair instructions will be detailed and must include the necessary inspection methods and acceptance criteria.
- The engineer will coordinate and seek consultation with various subject matter experts.

Primary Responsibilities:
- Evaluate nonconforming metallic structures components for acceptability and reparability to ensure flight worthiness of the components.
- Evaluate nonconformance for impact on component performance, functionality, service life, maintainability and various other possibilities.
- When acceptance of the nonconformance is not possible, develop a potential repair scheme and evaluate the repaired component for potential impact on component performance, functionality, service life, maintainability and various other possibilities.
- Development of a repair should minimize risk to the component and minimally invasive and within the capability of the production area accomplishing the repair.
- Repair dispositions must ensure component integrity and customer requirements are satisfied when the repair is accomplished as intended.
- Consult with various subject matter experts including potential customer interaction addressing the nonconformance and proposed disposition.
- Work with Production personnel such as Manufacturing Engineering to ensure repair disposition is understood, is feasible and can be accomplished as intended.
- Assist Production areas in the determination of root cause and potential corrective actions to prevent nonconformance.
- Work with team members to analyze nonconformance trend data, ensure the problem is understood, and assist in developing and implementing corrective actions.

Required Skills:
- 10+ years of MRB Engineering experience required. Potential 'split' shift responsibilities.
- Prior experience with aircraft design, manufacturing, assembly or repair as an MRB engineer.

MUST HAVE:
- BS degree in Mechanical or Aerospace Engineering required.

Experience/Qualifications Required:
- Prior experience with aircraft design, manufacturing, assembly or repair as an MRB engineer

Preferred:
- Logical problem solver who is organized and detail oriented
- Ability to evaluate and make technical decisions with little outside input
- Good written and verbal communication skills and the ability to work well in a team environment
- Demonstrated ability to interpret engineering drawings and models (2D and 3D) and knows GD&T
- Good understanding of computing tools and programs including the use of Microsoft Office
- Familiar with PLM and ERP systems such as Teamcenter and SAP Familiar with many types of aircraft structure materials and fabrication processes
 
Job Number: 9651
Job Location: Foley, AL
Rate: $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Fort Worth, TX
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split or Relocation: No


****MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT****
****MUST HAVE A BACHELOR'S DEGREE****


Job Description:
- Conduct design of Landing Gear and Systems components working within an integrated product development team reporting to the design or work package lead.

Responsibilities:
- Generate drawing and model design changes.
- Generate engineering bill of materials and parts lists for components and assemblies.
- Perform tolerance stack-up analysis considering fits/clearances, thermal effects, coatings and wear.
- Conduct design studies.
- Participate in design investigations due to in-service issues, test failures, and production problems.
- Work with other members of the IPT to ensure the product meets requirements (cost, producibility, customer, and regulatory, internal design standards).

Required:
- BS in Mechanical or Aerospace Engineering or related Engineering degree.
- 5 years engineering related experience.
- Basic understanding of hydro-mechanical assembly principles and design methodologies.
- Proficient with CATIA V5 solid modeling, drafting, and Functional Tolerancing and Annotation.
- Working knowledge of MS programs (Word, Excel, and PPT).
- Must be US Citizen.

Preferred:
- Open-minded, pro-active, quick learning ability, and strong desire to learn.
- Basic understanding of geometric dimensioning and tolerances.
- Working knowledge of SmarTeam and/or TeamCenter PDM system.
 
Job Number: 10066
Job Location: Fort Worth, TX
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Aerospace & Defense industry

Responsibilities

Responsible for the design and analysis of precision Gear Systems including Aerospace Actuators, Accessory Gearboxes and Propeller Drives. Other applications include Power Generation Gearboxes and Winch Drives. The position requires expertise and experience in design of rotating equipment including bearing analysis, spur and bevel gear design and analysis (AGMA)(CAGE), aluminum castings and lubrication and cooling systems. Minimum of 2000 hours experience with Pro/E\Creo (Pro/E\Creo preferred) or CATIA is necessary. Working knowledge of Geometric Dimensioning and Tolerancing is a requirement. Experience in mechanical system integration and development. Analytical knowledge of Reliability, FMECA, Nastran and Six Sigma are desirable. Familiarity with formal Qualification Standards such as DO160, MIL-STD-810 and/or EUROCAE ED-14 is desirable. Job function requires timely preparation of all associated engineering documentation including but not limited to Project Plans, Test Plans, Project deliverable documents and Engineering Changes. Create tolerance stack up report based on initial and final design. Maintain the technical knowledge and awareness of developments related to aircraft systems. Have experience in Aircraft Process & Methods.

The successful applicant will have strong electro-mechanical interface and application knowledge with demonstrated experience in meeting customer schedules, manufacturability and cost goal expectations. This person must be able to work effectively in a team environment and maintain flexibility to take on tasks outside their direct responsibility. Proven technical innovation and effective project management skills are desirable, candidate is expected to advance into Project Engineering position within two years.

Job Requirements

· College / University degree in Mechanical Engineering or in Aerospace Engineering.

· Minimum of five (5) year of relevant design experience (Aircraft Systems Engineering).

· Proficiency in design and analytical software tool, Microsoft Word, Excel, Project, PowerPoint.

· Proficiency in written and verbal communication.

· Ideally 5 plus years’ experience in an aerospace gear system, transmission or actuation related industry.

· Demonstrated ability to manage and support Project Engineering and Project Schedules.

Personal Characteristics

· Enthusiastic, self-motivated and able to demonstrate initiative.

· Confidence and ability to present to an audience.

· An ability to manage multiple, complex tasks and the drive to follow tasks through to a successful outcome.

· The confidence to challenge practices and the willingness to question to gain a full understanding of issues.

· A willingness to embrace change and an ability to identify and implement new processes.

· The capability to work efficiently and accurately, with an attention to detail, and the discipline to self-manage.
 
Job Number: 55258
Job Location: Park City, UT
Rate: 48-50/hour
Per Diem: possible
Overtime: possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Fort Worth, TX
Rate: $33.38/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split or Relocation: No


****MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT****
****MUST HAVE A BACHELOR'S DEGREE****


Job Description:
- Conduct design of Landing Gear and Systems components working within an integrated product development team reporting to the design or work package lead.


Responsibilities:
- Generate drawing and model design changes.
- Generate engineering bill of materials and parts lists for components and assemblies.
- Perform tolerance stack-up analysis considering fits/clearances, thermal effects, coatings and wear.
- Conduct design studies.
- Participate in design investigations due to in-service issues, test failures, and production problems.
- Work with other members of the IPT to ensure the product meets requirements (cost, producibility, customer, and regulatory, internal design standards).


Required:
- BS in Mechanical or Aerospace Engineering or related Engineering degree.
- 4 years engineering related experience.
- Basic understanding of hydro-mechanical assembly principles and design methodologies.
- Proficient with CATIA V5 solid modeling, drafting, and Functional Tolerancing and Annotation.
- Working knowledge of MS programs (Word, Excel, and PPT).
- Must be US Citizen.


Preferred:
- Open-minded, pro-active, quick learning ability, and strong desire to learn.
- Basic understanding of geometric dimensioning and tolerances.
- Working knowledge of SmarTeam and/or TeamCenter PDM system.
 
Job Number: 9926
Job Location: Fort Worth, TX
Rate: $33.38/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split: NO

**Must be a U.S. Citizen**
**Must have a Bachelor's Degree**

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Familiarity with aerospace design practices including designing for light weight design and random vibration environments.
- Working knowledge of geometric dimensioning and tolerance analysis.
- Modeling and drawing creation in Creo/Pro-Engineer.
- Experience with Company designed hardware on the EMU, ESOC and Space Station programs is a plus.

Education:
- Bachelor's Degree
- 5+ years of experience
 
Job Number: 9308
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer - Clearance / stress analysis NASTRAN finite element modeling NX PA

Description:
Mechanical Engineer - Clearance
Contractor's Work Location King of Prussia, PA

Number of Positions 3

Assignment Type Temp to Hire

Target Start Date 12/03/2018
Target End Date 03/02/2020
Work Schedule 9/80
Estimated Regular Hours/Week 44.00
Shift 1st
OT Expected No
Straight Time (Exempt)

Drug Screen Yes
Background Checks Yes

Position Description
Perform structural and dynamic design & analysis tasks under supervision of senior engineers within The Hypersonics HCSW Program. The candidate will conduct structural analysis of strategic missile systems, hypersonic vehicles, and related components. Specific duties may include performing structural analysis of composite, metallic and electrical components related to missile systems and their related ground equipment.

Skills Required
Bachelor's or Master's degree in a Civil/Mechanical/Aerospace Engineering/Structural Mechanics program or equivalent from an accredited college/university. Advanced stress analysis capability using NASTRAN and finite element modeling using NX or equivalent is required. Microsoft Office (Excel, WORD, PowerPoint).Knowledge of and applicable experience with spacecraft or aircraft structural analysis methods, including hand calculation experience for mechanical joints. Excellent verbal and written communication skills are essential.

Skills Preferred
MATLAB, Fortran, Microsoft Office, ABAQUS, Nastran, Missile/aerospace related education/background. Ability to work in a collaborative team-based environment.

Experience Required
Advanced stress analysis capability using NASTRAN and finite element modeling using NX or equivalent is required. Microsoft Office (Excel, WORD, PowerPoint).Knowledge of and applicable experience with spacecraft or aircraft structural analysis methods, including hand calculation experience for mechanical joints. Excellent verbal and written communication skills are essential.

Education Required
Bachelor's or Master's degree in a Civil/Mechanical/Aerospace Engineering/Structural Mechanics program or equivalent from an accredited college/university.
 
Job Number: JE-104S
Job Location: King of Prussia, PA
Rate: 70/hr max
Per Diem: no
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
Mechanical Engineer supporting the Mechanical Systems group within the Mechanical and Propulsion Engineering Division.

This position will support the specification, design, analysis, fabrication, procurement and testing of mechanical systems (including control surface mechanisms, launch and recovery mechanisms, payload doors, EO/IR ball retraction, etc.), landing gear, nose wheel steering, brakes, hydraulic and pneumatic systems, Ground Service Equipment(GSE), and other related systems. A minimum requirement of 2000 hours of experience in the design of aerospace mechanical systems using CATIA or SolidWorks. CATIA highly preferred.


The Structures Company is an AA/EOE.
 
Job Number: 251
Job Location: VA
Rate: $70-$80/Hr., ***DOE***
Per Diem: Yes
Duration: 3+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Model Based Systems Engineer (MBSE)

Description:
Location: Canoga Park, CA
Rate: $70.00 - $96.50/HR
Duration: 6 month contract
Shift: 9/80 Schedule. OT possible.
Per Diem Split: Yes (if eligible)

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

Duties:
-The successful candidate will have experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-A mastery level of practice as a SysML Model User and Builder is required.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.


Skills:
Required:
-Experience using IBM Rational tools including Rhapsody/Design Manager (DM); Rational Publishing Engine (RPE); and the Collaborative Lifecycle Management (CLM) tools of DOORS Next Generation (DNG), Quality Manager (RQM), and Team Concert (RTC).
-An intermediate level of practice as a SysML Model User and Builder is desired.
-The successful candidate will develop new company capability, provide tool troubleshooting support for programs, document work instructions, provide training, and communicate success stories.

Desired:
-Knowledge of Jazz Team Server (JTS) enterprise management is useful.
-Understanding of how these applications are deployed and used in the aerospace industry is preferred.
-Rocket engine or propulsion system domain knowledge is desirable.


Education:
-BS or MS in Engineering, Computer Science or related field is required.
-MS in Systems Engineering is desirable.
 
Job Number: 9767
Job Location: Canoga Park, CA
Rate: $70.00 - $96.50/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NDT DESTRUCTIVE TESTING - LEVEL 3 ENGINEER

Description:
JSG is hiring a Product Integrity & Quality Controls Engineer for our Client in Stratford, CT!

This is a position for a Non Destructive Testing (NDT) Level 3. In this position, located in Stratford, Connecticut, you will be primarily developing Ultrasonic (UT) nondestructive test instructions for composite components. Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Sikorsky Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT level 3's, Level 2’s, and Engineering technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification). Prepare and review engineering specifications. Develop and evaluate new equipment and technology. Provide technical support to manufacturing, engineering, programs, field personnel, and suppliers. Audit internal and external NDT inspection facilities. Participate in development of NDT training course material for level I, II, and III. Test and certify NDT level I, II, and III inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications :

Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT).
Ability to certify to NAS 410 Sikorsky UT level 3 requirements within 90 days of employment.
Including vision correctable to 20/25 in at least one eye.
Experience performing Ultrasonic NDT on Composite materials.
Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
Must be a US Citizen or legally authorized to work in US as a permanent resident.
Desired skills :

Composite UT experience on aerospace components.
Level 3 Eddy Current (ET) certification, and Fluorescent Penetrant (PT) level 3 certification are a plus.
Bachelor's degree or above in Engineering or Technology discipline.
Documented 5-10 years of aerospace nondestructive testing.
Technical writing experience.
Non-destructive test (NDT) experience with composite structures.
The ability to collaborate and work well with fellow team members.
Experience using CATIA or other 3D modeling software a plus.
Familiarity with NAVAIR Nondestructive inspection manuals and processes.
Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 369310
Job Location: Stratford, CT.
Per Diem: If Qualified
Overtime: Possible
Duration: 18 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NX Designer/Engineer - Chassis Powertrain

Description:
Purpose:
One of the world's leading heavy-truck manufacturers is looking for an NX Design Engineer to join their Chassis and Powertrain team! The main function of a mechanical engineer is to research and investigate the design, functionality and maintenance of mechanical products, equipment, systems and processes. A typical mechanical engineer has the ability to make engineering drawings, and read and interpret blueprints.

Essential Duties and Responsibilities:
• Design and detail vehicle components and systems.
• Interface with Engineering Analysis personnel to determine the most effective and economic materials to be used in product systems and components.
• Interface with Test & Development personnel to identify and analyze problems encountered in prototype development and testing.
• Provide creative technically feasible solutions.
• Evaluate state of the art developments in the vehicle industry and apply the latest advances.
• Apply statistical and engineering techniques in designing and testing.
• Use programming and modeling techniques in conjunction with mathematical analysis.

Required background experience and skills:
• At least 2 years of experience in product engineering design areas required.
• Creativity, verbal and written communication skills, analytical and problem solving ability.
• Team player and detail oriented.
• Ability to make sketches, engineering drawings and common computations.
•Extensive Siemens/NX experience required (at least 1 year of working experience)

Preferred:
• MS degree or BS degree in mechanical engineering (or similar i.e. automotive or aerospace engineering), or commensurate work experience.

Experience with Power Train or Chassis design preferred

Top 3 Must Have’s:
1. NX Experience
2. Product Design Experience
3. Team player/detail oriented
 
Job Number: 5367
Job Location: Portland, ORE
Rate: DOE
Per Diem: Possible
Overtime: No
Duration: 2 years +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: OLSA RESOURCES INC
Attention: Dina
Address: 3485 NE JOHN OLSEN AVE
City, State: HILLSBORO, OR 97124
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Non-Destructive Testing (NDT) Level 3 Technician (UT, ET, PT)

Description:
The ideal candidate will be primarily developing UT, ET and PT Non-Destructive test instructions for composite components.

Other NDT techniques will also be developed depending on candidates existing experience with other methods.

Occasional travel will be required to other Facilities within Connecticut and to Pax River, MD to review aircraft configuration, to perform Non-Destructive Inspection, and to develop Inspection Techniques for aircraft.

You will work closely with a team of Design Engineers, NDT Level 3's, Level 2’s, and Engineering Technicians to design inspection standards, to coordinate for standard fabrication, and to write and approve inspection techniques for components using the standards.

The position is contingent upon being able to certify in UT, ET and PT Level 3 per NAS 410 requirements within 90 days of beginning employment.

Secondary Level 3 responsibilities include:
•Performing engineering evaluations including defect analysis, NDT methods analysis, and inspection (when inspection is required must have a minimum level II certification).
•Preparing and reviewing engineering specifications.
•Developing and evaluating new equipment and technology.
•Providing technical support to manufacturing, engineering, programs, field personnel, and suppliers.
•Auditing internal and external NDT inspection facilities.
•Participating in development of NDT training course material for Level I, II, and III.
•Testing and certifying NDT Level I, II, and III Inspectors in accordance with NAS 410 and company requirements.

Basic Qualifications
•Certification (ASNT Level 3 certification, NAS 410 Level 3 certification, or Equivalent in UT, ET and PT).
•Ability to certify to NAS 410 UT, ET and PT Level 3 requirements within 90 days of employment. (Including vision correctable to 20/25 in at least one eye.)
•Experience performing UT, ET and PT NDT on Composite materials.
•Proficiency in Microsoft Office products (Word, PowerPoint and Excel) and database utilization.
•Must be a US Citizen or legally authorized to work in US as a permanent resident.

Desired skills
•Composite UT, ET and PT experience on Aerospace Components.
•Bachelor's degree or above in Engineering or Technology discipline.
•Documented 5-10 years of Aerospace Non-destructive testing.
•Technical writing experience.
•Non-destructive test (NDT) experience with composite structures.
•The ability to collaborate and work well with fellow team members.
•Experience using CATIA or other 3D modeling software a plus.
•Familiarity with NAVAIR Nondestructive inspection manuals and processes.
•Experience in Laser Testing Methods (LM), or Thermal/Infrared Testing (IR) is a plus
 
Job Number: 1810094139
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 18 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Optical / Infra Red Test Engineer (643)

Description:
*This is a full time, 1 year, contract position based in Lexington, MA*



We are looking for an IR device testing engineer who will be working on production testing operations of aerospace systems. Position will include hardware and software support, data analysis and review and process documentation development.



Required:

*4 years’ experience in test engineering including test plans, procedure, cases of EO/IR (Electro-Optical/Infra-Red) systems.
*Hands on IR processing experience
*BSME, BSEE or equivalent



Preferred:
*Experience performing BIT analysis on EO/IR systems.
*Requirements derivation and test case development
*Experience with Independent Verification and Validation (IV&V)
 
Job Number: 643
Job Location: Lexington, MA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Powerplant Subsystems Lead Engineer

Description:
Seeking a Powerplant Subsystems Lead Engineer with strong experience enabling him/her to be responsible for design, development, integration, testing and certification of the powerplant subsystems, including nacelle systems, inlet, thrust reverser, auxiliary power unit (APU) and fire protection for a supersonic business jet. The successful candidate will manage the powerplant subsystems design and system suppliers, as well as all design and certification activity required. The Powerplant Subsystems Lead Engineer will report to the Director of Propulsion IPT.

Duties include, but are not limited to:
• Develop powerplant subsystems design, architecture and product plans, including qualification and certification plans.
• Provide subject matter expert level technical leadership, mentoring and guidance on both practical and theoretical aspects of powerplant subsystems.
• Define requirements for the powerplant subsystems to ensure compliance with regulations/customer requirements
• Provide validation and verification of powerplant subsystems requirements.
• Perform powerplant subsystems tests and certification, and provide system and certification documentation.
• Manage the powerplant subsystems scheduling, budget, resources and suppliers.
• Report subsystem status to ensure milestones are met in support of the overall program schedule.
• The selected candidate will help to define the product development strategy and lead a team of engineers and analysts in that effort.
• She/he will prioritize the allocation of resources to meet the milestones of the program schedule, from concept through certification.

Requirements:
• Must be either a US citizen, a US permanent resident or someone who otherwise meets the requirements of a US Person under EAR part 772 and ITAR 120.12.
• Cannot be party of any restrictive covenant, non-compete, non-solicitation, or non-disclosure/confidentiality agreement with current or former employer that would prevent you from performing the duties of the position.
• Minimum of a Bachelor’s Degree in Aerospace, Mechanical Engineering or other relevant Engineering position.
• Master’s degree in a technical and/or management specialty preferred.
• 7+ years of deep, hands-on experience in Powerplant systems development, design and testing in Military, Commercial and/or business jet aircraft.
• 2+ years of demonstrated experience leading technical resources and teams, both internally and externally, as well as both on-site and off-site.
• In-depth and current knowledge of Part 25 regulatory requirements.
• Experience and expertise in the development of commercial and/or high-end business jets strongly desired.
• Recent experience in developing powerplant systems from concept through certification strongly desired.
 
Job Number: 42-003
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: Possible
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Specialists

Description:
STS Technical Services is Hiring Procurement Specialists in Fort Lauderdale, Florida.

 Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-800-359-4787.

Position Summary:
The primary purpose of this role is to support the procurement and cost optimization opportunities, executing and capturing cost reduction on expenditures for indirect goods and services.

Job Responsibilities:
Support information based decision making activities including goal setting, performance management and analytics
Provide data and recommendations to ensure informed selection decisions and develop and administer agreements and statements of work in collaboration with business and legal department
Conduct data gathering, spend analytics, and market research intelligence in order to develop business cases using TCO and NPV concepts to assist the business in delivering measurable cost savings
Identify and deploy process improvements
Effectively manage conflicts and transformations at all levels by developing and leveraging trusted business relationships
Develop and manage key peer relationships to support knowledge sharing and work optimization
Assist with maintenance of contracts database and special terms documents
Develop and manage vendor relationships including commercial negotiations, managing on time deliveries and assisting in Quarterly Business Reviews and other assessments
Interface other areas/units within the company and/or with customers, discussing commercial and technical conditions involved
Assist in special projects, including large RFPs, process improvement projects and cross-departmental initiatives
Review market trends and benchmarking in order to identify opportunities resulting from new product offerings and/or market shifts (e.g. entry or exit of suppliers, changes in pricing)
Enforce Procurement Policy and Guidelines across the U.S.
Assist in training new employees on general procurement processes

Qualifications:
Degree in Finance, Operations/Supply Management or related experience
1-3 years of experience in Procurement
Preferably 1+ years’ experience in preparation of RFQ/RFPs, negotiation, follow-up and control of commercial proposals
Experience in the Aerospace industry a plus
Commercial proposals and follow-up techniques
Manage and measure work
Strong time management, prioritization and organizational skills
Knowledge of Procurement methodology
MS Office (Word, Excel, Powerpoint)
Strong communication skills and interpersonal skills
Professionalism and detailed oriented
Experience in SAP & Quantum desirable
Advanced experience in spreadsheet
Experience with MS Project or similar technology
Language proficiency in Portuguese or Spanish desirable
Learn on the Fly, global perspective of business environment and technology
Ability to work individually or in team settings Working Conditions / Environment/ Special Requirements
Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44122
Job Location: Fort Lauderdale, FL
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Clerks

Description:
STS Technical Services is hiring Production Clerks in Fort Lauderdale, Florida.

Job Summary:

Compiles and records maintenance production data to prepare records and reports on volume of production, consumption of raw material, quality control, and other aspects of maintenance production.

Job Responsibilities:

Receive customer repair orders.
Receive Hangar paperwork as required and files per customer request
Open tasks as required from Hangar for each work order
Open work orders
Deliver work order and part to appropriate shops for repair
Receive completed orders after repair is complete
Deliver Accounting copies to Accounting Department for billing
Performs accurate accountability of repair documentation on all parts being worked including updating computer and filing
Accounts for all tracked paperwork in tally books in Production Control
Closes work orders. Closes operations in those work orders
Answers and directs company phone calls as a backup
Coordinates with customers regarding form completion
Coordinates with leads as to which planes have priority
Coordinates with Project Managers on any special requests
Familiar with each customer’s Qualified Inspectors Listings
Generates reports from as required
Assist Director of Quality Assurance and Hangar as needed
Keep workplace organized

General Qualifications:

Prior office experience is required
Must have, at minimum, at high-school diploma
Familiarization with the aerospace industry is preferred
Computer skills are a must

Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 44717
Job Location: Fort Lauderdale, FL
Duration: Contract
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Project Engineer
Location: Chula Vista, CA

Job Summary:
•Update, and in some cases create, MS Project Plans for R&D Ceramic Matrix Composite (CMC) and Prognostic Health Monitoring (PHM) projects.
•Gather data to update plans, post standardized visual form up to 3 times per week, and update standardized milestone trackers in a visual form and post on a weekly basis.
•Provide R&D Leadership risk status using standardized format up to twice a week.
•Be expert level Microsoft Project, Excel, and PowerPoint user and comfortable working with and speaking to the team.
•Be familiar with Teamcenter and Enovia to access and status engineering documents/models is preferred.

Qualifications:

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Education & Experience:
•Minimum of 5 years’ experience in the management of projects with at least 3 years in the aerospace and/or airline industry
•Bachelor’s degree in engineering technology a minimum, mechanical, aero, civil, or materials science preferred
•Expertise in developing and executing operating budgets

Skills:
•Strong interpersonal skills and a high degree of collaboration at all levels required
•Demonstrated ability to multi-task with strong task orientation and attention to detail required
•Experience in Earned Value Management (EVMS) a plus
•Demonstrated ability to produce and maintain project plans required
•Ability to coordinate with people in different project teams and functional roles required
•Excellent communication and presentation skills, both written and verbal required
•Experience in Risk Management a plus

Required Computer Skills:
•Proficient with Microsoft Office Suite, including Word, Excel, PowerPoint and Outlook
•Expertise in MS Project

Certificates, Licenses, Registrations:
•PMI Project Management Professional certification a plus
 
Job Number: 55159
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Location: Windsor Locks, CT
Rate: $62.00/HR
Duration: 1 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split or Relocation: No


****MUST BE A U.S. CITIZEN****
****MUST HAVE A BACHELOR'S DEGREE****

Job Description:
Integrated Product Development (IPD) team lead, responsible for design, development and certification of space life support equipment. Responsibilities include managing a cross functional team through the design process, holding design reviews, managing documentation including customer data items, tracking schedules and budgets.

The Human Exploration & Launch business within ISR & Space Systems provides Environmental Control and Life Support Systems in deep space, low earth orbit, undersea, and on the ground. Our hardware is paramount to survival in harsh environments, and our passion for our work demands excellence in everything we do, from the talent we recruit to the highly-engineered systems we deliver. We value people, integrity, ideas and performance.

Requirements:
- Project Engineer with a background in Aerospace, Mechanical, Electrical or Chemical Engineering with 7 years minimum of experience in Space, Aerospace or Defense.
- Must have experience leading IPD Teams in the creation of new designs for aerospace, space or military products.
- Must have experience with SAP and understanding or processing hardware in concert with SAP.
- The Project Engineer will work per the direction of the Program Engineering Manager or designees to assist in team execution to plans.
- Skills and working knowledge of Project Management Body of Knowledge required. Facilitate and lead IPD Team with members from all functions.
- Planning, execution, coordination and communication of team activities and commitments
- Coordinate and status all IPD Team activities including requirements generation, development, design (including program planned reviews), procurement, fabrication and test.
- Work with IPD to create hardware development plans, coordinate hardware build effort in both the engineering labs and production labs.
- Ensure targeted goals (schedule and cost) is communicated to the team members
- Identify, assess and manage the team’s risks
- Hold/chair/lead weekly team meetings (or at intervals determined by the Program Engineering Manager (PEM) or Cost Account Manager (CAM)) to ensure holistic team effort within authorized scope. Ensure actions are document and driven to closure commitments.
- Perform Estimates to Complete (ETC) updating them progressively to ensure the team meets budgets and avoids scope growth and overruns.
- Meet design and design-to-cost requirements.
- Assist in administering Standard Work for the IPD Team including input of evidence of closure and status for all functions. Individuals are required to be energetic and lead team.
- Project Engineers shall work to Company Standard Work and Procedures.
- Notifying the PEM immediately of any potential scope or ETC growth before the work is executed.
- Assist in defining preliminary parts lists and coordinate decision making on long lead part procurements.
- Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
- Must be comfortable using MS Project scheduling tools and comfortable with discussing performance to budget and creating cost and schedule recovery options and plans.
- Assist in creating program directives that define Earned Value Plans.
- Status plans and recommends corrective action to the Program Engineering Manager and/or Program Manager Work with operations to fabricate, assemble and test development and qualification and flight hardware.
- Coordinate, track and support development and flight hardware build and test.
- Initiate in scope engineering changes working with all functions to implement approved changes.
- This will include marking drawings, copying prints, creating PDF’s to support UTAS electronic EC processes.
- Document activities and programs worked with time spent on various activities.
- This information will be submitted weekly and summed monthly by person with the monthly invoice.
- Some limited program travel may be required.
- Overtime up to 12 hrs/week may be authorized
 
Job Number: 9416
Job Location: Windsor Locks, CT
Rate: $62.00/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer

Description:
Location: Windsor Locks, CT
Duration: 1 Year Contract
Pay Rate: $48.25/Hr
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****

Requirements:
- Project Engineer with a background in Aerospace, Mechanical or Chemical Engineering with 4 years minimum of experience in Space, Aerospace or Defense.
- Must have experience leading Integrated Product Design (IPD) Teams in creation and support of new and legacy aerospace product designs.
- Work per the direction of the Program Engineering Manager (PEM) or designees to assist in team execution to project plans and ensure assigned projects are completed within budget, scope, schedule, and to the highest level of quality.
- Working knowledge of Project Management Body of Knowledge is required.
- Must have understanding of SAP/ERP hardware requirements management process.

Essential Duties and Responsibilities:
• For assigned projects, facilitate and lead IPD Team with members from all functions.
• Plan, execute, coordinate, communicate all IPD Team activities including requirements generation, development, design and technical reviews, procurement, fabrication, assembly and testing of development, qualification and flight hardware.
• Oversee project plans, work breakdown structures, cost estimates, budgets and risk management plans.
• Work with IPD to create hardware development, procurement, fabrication, assembly and test plans.
• Ensure targeted goals (schedule and cost) are communicated to the team members.
• Schedule and conduct effective meetings to coordinate planning and scheduling, task assignment and resource allocation to ensure holistic team effort within authorized scope. Ensure actions are documented and driven to closure commitments.
• Assist Control Account Managers with EVMS planning, performance, schedule and tracking.
• Proactively direct, monitor and control scope and performance of assigned projects to approved budget and schedule using insight to identify trends and project challenges. Recommend and implement preventive and corrective actions.
• Ensure project scope and delivery approach/timeline are aligned with Program Office, contract and customer requirements.
• Risk and Issue Management: identify, assess and manage project risks and issues. Develop and execute mitigation and response plans.
• Supply Chain support: interface with Planning and Procurement regarding project material and component requirements. Visit supplier plants as required to ensure manufacturing processes meet requirements.
• Build and maintain strong and effective relationships, and provide insights and guidance to supporting departments to secure compliance with schedules, coordinate tasks and resolve problems.
• Support Program and Project Management on proposals.
• Configuration Management and Change Control: Initiate in-scope engineering changes working with all functions to implement approved changes.
• Ensure IPD Team work is performed to UTAS approved Standard Work and Procedures
• Some limited program travel may be required.

Skills Required:
• Exceptional planning, organizational and analytical ability
• Strong interpersonal, influencing, written and verbal communication skills
• MS Office Suite proficiency
• MS Project scheduling and resource planning
• Earned Value Management
• Decision making and problem solving
• Failure and Root Cause analysis
• Ability to resolve highly complex technical issues
• Must be able to interpret technical drawings, specifications, illustrations and written documents.
• Status summary and presentation skills
• Program Management Professional Certification is a plus

Desired Attributes:
• Positive energy
• Leadership
• Results driven
• Team-oriented
• Self motivated
• Innovative

Education:
• BA/BS degree in Engineering w/ 6+ years of experience in Project Engineering role
• MA/MS degree in Engineering w/ 4+ years of experience in Project Engineering role. This is a temporary position. Opportunity for transition to permanent position may develop dependent on project requirements.
 
Job Number: 9036
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 Year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Engineer w/Database Management

Description:
Senior Project Engineer

Location: Chula Vista, CA



Job Summary:
•Create a plan to effectively manage the retrofit of several thousand parts on a fleet of aircraft and over 20 airlines
•Using database management, track the progress and completion of parts coming off aircraft, those being refurbished and those being installed
•Measure progress and present status to management and stakeholders
•Work with vendors to track progress and, using knowledge of aircraft parts repairs and refurbishment, troubleshoot schedule and quality issues
•Create, maintain and present status presentation deck to team and management
•Must have understanding of maintenance, repair, overhaul and regulatory requirements in the commercial aircraft industry


Essential Functions and Responsibilities include the following.

•Update/develop/maintain databases (Access, Excel), and create Power Point reports in support of tracking thousands of parts undergoing retro-fit activity on a fleet of more than 200 aircraft operated by over 20 airlines

•Create tracking documents and presentations for technical teams, management and customer; present as needed in periodic review meetings

•Work with vendors to gauge progress, maintain schedule and troubleshoot problems if necessary

•Job functions include using continuous improvement tools, developing work instructions / standard work, and following all regulatory company procedures including thorough recording of all work to ensure traceability


Qualifications:

To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.

Requirements:
•Proficiency with MS Project
•Proficiency with MS Excel
•Proficiency with MS PowerPoint
•Proficiency with MS Access
•Basic data analysis capability
•Familiar with SRM, CMM, EM, and AMM technical content and application

Education & Experience:
•Minimum of 5 years’ experience in the management of projects with at least 3 years in the aerospace and/or airline industry
•Bachelor’s degree in engineering technology - mechanical, aero, civil, or materials science preferred - or equivalent experience
•Basic knowledge and understanding of maintenance, repair, overhaul, and regulatory requirements in the commercial aircraft industry

Skills:
•Strong interpersonal skills and a high degree of collaboration at all levels required
•Ability to work with all levels of maintenance, engineering, and management personnel and capable of positively interacting in a team environment
•Familiarity with nacelle systems highly desirable
•Have good listening and verbal communication skills
•Demonstrated ability to produce and maintain project plans required
•Ability to coordinate with people in different project teams and functional roles required
•Excellent communication and presentation skills, both written and verbal required
•Experience in Risk Management a plus

Certificates, Licenses, Registrations:
•PMI Project Management Professional certification a plus





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55201
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 2+ years
Start Date: 10/29/18
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Management 1 CA

Description:
163710 Project Management 1 (Job Number: 18023261)

Number of Openings: 1

Location(s): United States-California-El Segundo


Shift: 1st Shift

Target Start Date: Dec 3, 2018

Target End Date: Oct 1, 2019

Pay Rate: $32/hr

Work Schedule: 9/80

Duration of Assignment: Up to 1 year

The selected candidate will oversee and manage the operational aspects of ongoing projects and serve as liaison between project management and planning, project team, and line management.

Plans and coordinates preparation of project documentation, such as engineering drawings, production specifications and schedules, and contract modifications, to ensure customer contract requirements are met. Analyzes proposed changes of product design to determine effect on overall product and system. Coordinates modification records for management control. Reviews and analyzes released engineering change data and coordinates changes with engineering, quality, support, manufacturing, and engineering data control activities.

Oversees Configuration Reporting for multiple programs in accordance with government / customer requirements. Document includes communication when performing Work Order completion, and subsequently preparing a Final Configuration Report for inclusion in the applicable End Item Data Package. Supervises Change Control Worksheets as a quality notification for released or revised engineering/drawings while releasing tasks to affected stakeholders to implement the change.


Basic Qualifications:
•Minimum of a Bachelor's degree and 1 year work experience in a quality, production support, manufacturing and/or engineering environment.
•Ability to read engineering drawings
•Experience with Microsoft Office Suite
•Ability to work in cross functional teams and interface/communicate with multiple levels of leadership and customers.
•Ability to multitask and work in fast paced environment.


Preferred Qualifications:
•SAP Material Requirements Planning Knowledge
•Enovia and Solumnia Knowledge
•Aerospace, Space Systems, and/or Defense Industry Experience
•Strong Project Management, Leadership and Organization Skills
•Strong Data Analytics
•Experience in a multi-functional organization
 
Job Number: MB-1696
Job Location: El Segundo, CA
Rate: 32/hr max
Per Diem: no
Duration: 1 year
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Schedule Manager

Description:
Location: Windsor Locks, CT
Rate: $33.38/HR
Duration: 2 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split or Relocation: No


****MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT****
****MUST HAVE A BACHELOR'S DEGREE****


Job Description:
- Project Schedule Manager mid level complexity engineering management and project management for technical process improvement projects.
- Responsibilities include developing productivity tools, managing documentation, tracking schedules.
- Work closely with technical experts, project leads, and program managers in planning, creating, and managing resource loaded schedules.
- Track baseline schedules, perform what-if analysis, and develop contingency scenarios.
- Ensure compliance with scheduling best-practices, accuracy of project schedules, and perform version control.
- Provide timely and accurate processing of schedule updates.
- Performs critical path analysis.
- Analyze the impact and extent of internal and subcontractor delays and major schedule changes.
- Suggest corrective actions to keep the project on scope, budget, and time.
- Create and publish high level integrated master plans and schedules in accordance with the requirements or needs of the necessary stakeholders.
- Capture progress to date in resource loaded schedule, and coordinate performance with EVMS staff to create monthly EV metrics and forecasts.
- Ensure that an open communication system is available where all stakeholders are informed about changes to established schedules.


Education:
- Bachelor's Degree
- 5+ years of experience
- Aerospace experience preferred
 
Job Number: 9940
Job Location: Windsor Locks, CT
Rate: $33.38/HR
Per Diem: No
Overtime: Possible
Duration: 2 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Schedule Manager

Description:
Location: Houston, TX
Rate: $33.38/HR
Duration: 2 year contract
Shift: 1st Shift
Overtime: Possible
Per Diem Split or Relocation: No


****MUST BE A U.S. CITIZEN OR PERMANENT RESIDENT****
****MUST HAVE A BACHELOR'S DEGREE****

Job Description:
- Project Schedule Manager mid level complexity engineering management and project management for technical process improvement projects.
- Responsibilities include developing productivity tools, managing documentation, tracking schedules.
- Work closely with technical experts, project leads, and program managers in planning, creating, and managing resource loaded schedules.
- Track baseline schedules, perform what-if analysis, and develop contingency scenarios.
- Ensure compliance with scheduling best-practices, accuracy of project schedules, and perform version control.
- Provide timely and accurate processing of schedule updates.
- Performs critical path analysis.
- Analyze the impact and extent of internal and subcontractor delays and major schedule changes.
- Suggest corrective actions to keep the project on scope, budget, and time.
- Create and publish high level integrated master plans and schedules in accordance with the requirements or needs of the necessary stakeholders.
- Capture progress to date in resource loaded schedule, and coordinate performance with EVMS staff to create monthly EV metrics and forecasts.
- Ensure that an open communication system is available where all stakeholders are informed about changes to established schedules.

Education:
- Bachelor's Degree
- 5+ years of experience
- Aerospace experience preferred
 
Job Number: 9909
Job Location: Houston, TX
Rate: $33.38/HR
Per Diem: No
Overtime: Possible
Duration: 2 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Location: Chula Vista, CA
Rate: $38.59/HR
Duration: 1 year contract
Shift: 1st Shift
OT: Possible
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Quality Engineer (QE) will have 10-20 assigned suppliers to manage quality activity.
- QE will be responsible for quality problem resolution, processing and closure of supplier quality notifications (escapes, disclosures), on-time closure and follow-up of all associated corrective actions.
- Responsibilities will also include supporting/leading supplier quality meetings/reviews and weekly stand up meetings in front of Quality & Supply Chain Leadership.
- Root cause and corrective action is required for all supplier escapes.
- QE will assist assigned suppliers in systemic root cause corrective action analysis and track supplier actions.
- QE will support value stream meetings as needed.
- QE will be responsible for supporting quality system, product, or technical process audits.
- QE will have the opportunity to identify an area of improvement within the organization and hold an event to solve the problem.
- Potential travel in support of supplier escapes, issues or audits

Education / Certifications:
- BS in Aerospace/Mechanical Engineering/Quality/MFG Technology or related field.

Experience:
- 5-7 years of experience in manufacturing engineering or quality engineering field related to the manufacture of Aerospace Components, Automotive Structures or Department of Defense.
- Should have experience in quality system, product, or technical process audits.
- Must have experience in RRCA and problem resolution.
- Strong P.C. Skills.
- Strong communication skills and experience with cross functional teams.

Must have skills:
- MFG and/or QA background.
- Strong C/A implementation background.

Preferred skills:
- Lean Mfg/Mfg. process experience, Supply Chain and audit experience with AS9100 & AS9102, Processing background (HT, NDT etc.)
- Digital Product Definition & Model Based definition experience.
- PPAP & SPC working knowledge & implementation.
- Use of measuring equipment, hand and computer driven.
 
Job Number: 10045
Job Location: Chula Vista, CA
Rate: $38.59/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer

Description:
Quality Engineer

Location: Foley, AL (36535)





Determines quality improvement parameters by identifying statistical methods relevant to manufacturing processes. Provides statistical information for establishing quality standards by identifying testing methods and samples.


This position will serve as the Quality Engineer with primary responsibility for quality management of components manufactured in the Foley facility. These duties may include the following: • Maintain a close relationship with customer and program leadership to ensure compliant hardware deliveries. • Interpretation of inspection requirements based upon engineering and specification requirements. • Interpretation of cosmetic acceptability of final delivered hardware. • Production Part Approval Process (UPPAP) oversight leading to certification as a member focal point (MFP). • Assist in the preparation, review and approval of specific quality documents such as Quality Plans, Qualification Test Procedures and Acceptance Test Procedures. • Coordinate implementation of new inspection methodologies. • Participation in customer, third party regulatory and internal audits. • Preparation and presentation to senior leadership and customer Defect Eradication and Capability (AS9103) improvement plans. • Prepare Sampling Plan Procedures. • Coordinate preparation and management of Notification of Escapes (AS9131) with suppliers, internal manufacturing and the customer. • Prepare, reviews and audits First Article Inspections (AS9102).


US Citizen





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55228
Job Location: Foley, AL
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Engineer with Laser Inspection (32)

Description:
*This is a permanent position located in Baltimore*



We are looking for a Quality Engineer who will be working on our aerospace systems developing and monitoring procedures, planning, inspecting, surveying, reporting etc. to ensure top quality results.
Candidate will be working in many areas including first and last article inspection, process auditing, requirements & compliance review, process creation and improvement, flow downs, non-conformance issues, drawing review and development, material review board (MRB), working on Integrated Product Teams (IPT), and certifying final inspection and deliverables concluding with a certificate of compliance.
Candidate will be working with these tools on a daily basis: CMM (Coordinate Measuring Machine), Faro Arm, Hardness tester, Optical comparator, Profilometer, Sine plate, calipers and micrometers, and various gauges.
Required:
*5 years’ experience working as a Quality Engineer in a defense or military manufacturing environment.
*AS9100, Six Sigma and SPC experience
*Knowledge of Faro Arm and laser inspection.
*Military specifications for materials, pumps/compressors, protective finishing, heat treating, and non-destructive testing.
*ASME Y14.5M (dimensioning and tolerancing), ANSI/ASQC Z1.4 (sampling procedures and tables for inspection by attributes), MIL-STD- 100 (engineering drawing practices), ANSI/NCSL Z540-3 (calibration systems requirements
*4 year degree or equivalent
Prefer:
*ASQ Quality Engineer certification
 
Job Number: 32
Job Location: Baltimore, MD
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Recruiter (Manufacturing) CA

Description:
Request number: 5680
Job title: Recruiter (Manufacturing)
Number of openings: 1
Position location: Torrance - CA
Employment type: Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No

Maximum Hourly Pay Rate: 35
Start Date: 11/05/2018
Tentative End Date: 08/05/2019

Job Description
Function:
Aircraft Group is looking for a Contract Recruiter for our aerospace plant in Torrance, CA. Due to growth and new contract awards, We are growing and we are in need of your help to identify and hire talent. In this role, your main focus will be on recruiting for hourly nonexempt manufacturing/skilled trades positions (Machinists, Assembly Techs, Maintenance Techs, etc.) The expected duration of this contract is 9-12 months. If you have experience recruiting for hourly manufacturing/industrial/technical positions and have a positive, resourceful attitude, we invite you to apply!

Aircraft Group is the leader of advanced flight controls for commercial and military aircraft. We are positioned on virtually every aircraft in the marketplace, supplying reliable systems that are highly supportable and add significant value for our customers. Client designs, manufactures and integrates precision motion control components and systems. Our high-performance solutions are used in satellites and space vehicles, military and commercial aircraft, launch vehicles, missiles, industrial machinery, marine applications, and medical equipment. While we are most known for our products that are the best in the industry, what’s unique about Moog is our enabling, pioneering culture. Headquartered in East Aurora, NY, we employ over 11,500 employees in 28 countries. We operate within a culture of trust and mutual respect, allowing our employees to collaborate to produce cutting edge technology.

Essential job functions:
Here's what you can expect day to day:
• Partner with hiring leaders to accurately define position requirements and develop an effective sourcing strategy
• Compose and post job ads
• Use creativity and resourcefulness to proactively source candidates
• Conduct phone screens to qualify and present candidates to the hiring teams
• Extend offers
• Maintain data integrity in the Applicant Tracking System (Taleo)
• Maintain communication with hiring teams throughout the recruitment process

Preferred qualifications include:
• Strongly prefer experience recruiting for nonexempt/hourly skilled trade positions in Manufacturing (CNC Machinists, Assembly Techs, Maintenance Techs, Inspection Techs, etc.)
• Experience carrying a requisition load of 35+ open positions
• 3+ years of full cycle recruiting experience
• Experience as a Corporate Recruiter
• Experience with Applicant Tracking Systems (Taleo strongly preferred)
• Demonstrated creativity to successfully source hard to find manufacturing skilled trade candidates
• Experience with OFCCP hiring policies and guidelines
• Bilingual Spanish/English is helpful

Education:
Minimum requirements include:
• Bachelor’s Degree
• Minimum 2 years of recruiting experience
 
Job Number: MB-5680
Job Location: Torrance, CA
Rate: 35/hr max
Per Diem: no
Duration: 10 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability Engineer (FRACAS) (501)

Description:
*This is a full time, 1 year contract to hire position, located in York, PA*



We are seeking a contract Reliability and Maintainability (RAM) engineer who will be performing high level math and risk analysis of aerospace models/systems designs that ensure maximum availability and sustainment. Candidate will be using functional Failure Modes Effects and Criticality Analysis (FMECA) and FRACAS to reduce or eliminate risk, using failures modes to assess improvements and update analysis by evaluating test results.



Daily use of block diagrams, Test Incident Reports (TIRs) input into the Failure Reporting Analysis and Corrective Action System (FRACAS) database, working with staff to unearth potential failure modes and mitigate, while tracking modifications to assist in assessing program success. Will use Reliability Enhancement Testing (RET) and reliability demonstration testing.



Required:
*2 years’ experience in Reliability, typically RAM or RM&T, analyzing data sets and identify high drivers.
*Experience performing allocations/predictions, FMECA and FRACAS.
*Familiar with reliability software tools (preferably WQS)
*Understanding of mechanical, electrical, electronic and hydraulic engineering.
*4 year degree in Engineering, Math or other Science



Pluses:
*Knowledge of WQS software
*Familiar with Specialty RAM-T disciplines.
*ASQ Certification
 
Job Number: 501
Job Location: York, PA
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability and Maintainability Engineer(Level 4)

Description:
Essential Skills/Experience:
Extensive Aerospace Reliability and Maintainability work experience or equivalent
Expert understanding of Aerospace terminology, systems, sub-systems, functions
Expert knowledge of typical aerospace BOMs (structure, P/N, Rev, nomenclature)
Experience in leading and performing reliability, maintainability, product support or equivalent analyses using analytical approaches and modeling techniques [(examples: Failure Modes Effects Analysis; Fault Tree analysis; Maintainability analyses; Failure investigations, analysis and correction action; Level of Repair Analysis (LORA); Reliability Centered Maintenance Analysis (RCMA); fault prediction/detection/isolation analysis; Operating and Support cost analysis (O&S); Life Cycle Cost analysis (LCC); trade studies; system architecture studies; probabilistic risk assessment and baseline comparative analysis to assess design characteristics and supportability issues/concerns
Proficiency in developing Program and Test Plans
Proficiency using Excel and MS Office tools
Proficiency in developing comprehensive CDRLs and written reports
Able to work independently

Preferred Skills/Experience:
Direct maintenance or flight operations experience on fixed wing or rotorcraft
Experience in performing Level of Repair Analysis (LORA) for US Air Force contracts
Airframe and Powerplant (A&P) license
 
Job Number: 1092018
Job Location: Ridley Park, PA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
S&C Engineer

Description:
We are searching for a passionate and dedicated S&C Engineer for a position located here in Moses Lake, WA to

review and support Certification Activities, including but not limited to:
Create and review Certification Plans.
Create and review Component Qualification Test Plans, Qualification Test Procedures and Qualification Test Reports.
Review qualification by similarity and/or analysis reports.
Review system safety documents (PSSA, SFHA, AFHA, SSA and Particular Risk Analysis).
Create, review and approve ground test procedures, flight test procedures and their corresponding test reports.
Perform Component Drawing Reviews.
Complete aircraft assembly and installation drawing reviews.
Participate in Systems Design Reviews.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Coordinate with certification authorities to seek clarification on requirements.
Review certification guidance material (advisory circulars, etc.) and incorporate the necessary guidance into the certification plans.
Support Flight Testing Activities, including but not limited to:

Help determine test specification definition.
Discuss, write and review test plans and preparation activities with flight test team.
Help prepare and review pre and post flight briefings.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.
Flight Sciences:

Supply expertise in area of aircraft performance, stability & control and aircraft handling characteristics to support the development and certification flight testing for both new and supplemental type certificates.
Plot time history data to investigate and resolve flight snags; analyze flight test data to develop/validate performance, stability and control law functionality and status test points based on test objective and certification pass/fail criteria.


Requirements
Knowledge/Skills/Abilities:



Knowledge of flight test operations and flight certification, including aerodynamic testing and/or design; flight testing of aircraft performance and handling characteristics, including experience with take-off; landing; climb and en-route performance; static-source error corrections and stall speed testing; longitudinal & lateral/directional stability and control; minimum control speeds; stall characteristics; high speed characteristics, crosswind takeoff/landing and flight into known icing.



Education:

Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Other Engineering fields may be considered.
Computing skills (e.g. Excel VBA, Fortran, C, Visual Basic, Matlab, Simulink, CFD, Python)


Experience:

Aerospace engineering experience in Flight Sciences, including experience in aerodynamic testing and/or design; flight testing of aircraft performance and handling characteristics, including experience with take-off; landing; climb and en-route performance; static-source error corrections and stall speed testing; longitudinal & lateral/directional stability and control; minimum control speeds; stall characteristics; high speed characteristics, crosswind takeoff/landing and flight into known icing.
Must have a proficient working knowledge of 14 CFR Part 25 certification regulations pertaining to aircraft performance and stability & control, together with the associated means of compliance presented in AC 25-7C.
Operational experience should also include knowledge of test maneuver techniques and build-up methodologies specific to Flight Sciences testing.
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. MANUFACTURING ENGINEER

Description:
JOHNSON SERVICE GROUP is looking for an experience SR. Manufacturing Engineer for our Aerospace Client in Simi Valley, CA.


Brief Description

Successful candidate will implement lean process improvements in a precision machining environment that reduce process variation and improve productivity, as part of the Manufacturing Engineering team. This position is located in Simi Valley, CA.

Responsibilities:

Reduce scrap and non-conformances through training and improved process control
Improve sales OTD through training, set-up reduction, and process improvements
Recommend and implement new equipment, including process planning and CNC programming development.
Develop and modify manufacturing processes including process planning, process drawings using CATIA software, fixtures, cutting tools, gages, programs, special processes, assembly, and inspection
Participate in LEAN initiative and engage Six Sigma tools for process improvements
Assure that manufacturing engineering technical data is complete and accurately documented to provide an accurate technical/historical base for future reference that meet customer requirements

Qualifications:

BS Degree in Manufacturing, Mechanical, Aeronautical, Industrial, Materials Engineering
10+ years experience with most phases of prototype or small batch aerospace precision machining processes including:
Experience and knowledge of manufacturing processes and cutting tools
Fixture design
Experience and knowledge of in-process and final inspection tools and methods
Manufacturing Process Planning utilizing CATIA and MS NAV
Knowledge of special processes
Knowledge of quality management systems (AS9100)
Cost Estimating is preferred
Heat Treating and Metallurgical process knowledge
Plating and Coating process knowledge
Experience with CATIA, Microsoft Dynamics NAV, PC-DMIS is preferred
Experience with Lean, Six Sigma is preferred
Must be US Citizen or Permanent Resident Card Holder
 
Job Number: 368174
Job Location: Simi Valley, CA
Per Diem: If qualified
Overtime: Possible
Duration: 3 Month +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
SR. QUALITY ENGINEER

Description:
JOHNSON SERVICE GROUP is looking for an experienced SR. Quality Engineer for our Aerospace Client in Simi Valley, CA.

Brief Description

Support Manufacturing, Manufacturing Engineering and Purchasing Departments in Quality related Issues, drive continuous improvement initiatives throughout the manufacturing and inspection processes both at PSI Bearings and at our suppliers. Responsible for implementation and analysis of technical products, processes, and systems. May develop a range of processes and recommends alterations to improve quality of products and/or processes. Works with minimum supervision, conferring with superior on unusual matters. May be assisted by Entry/Junior or Intermediate Level personnel.

Responsibilities:

AS9100 Rev D and ISO 10012 – Strong understanding and ability to apply specified requirements in a cost-effective approach.
Reviewing New Product Launch customer specifications to flow down new requirements to all functions and ensure in establishing compliance to customer requirements
Reviewing Customer Po’s to identify requirements and flow down new customer requirements to all functions.
Ability in navigating in customer portals.
Ability to communicate with customer and suppliers to resolve processes gap.
Ability to collect, compile and analyze data (using the appropriate six sigma methods and techniques); to determine both the actual root causes of identified problems and required corrective (preventive) actions to prevent recurrence.
Able to affect internal and external PPM (scrap and rework) reduction and OTD improvements both internally and at our suppliers (machining and special processing).
Knowledge of dimensional inspection measurement systems and their application for the inspection of complex products – full understanding of ASME Y14.5 (GD&T).
Implementing Control Plans and/ or SPC to reduce inspection processes.
Performing PPAP’s (Production part approval process).
Performing process capabilities analysis on key characteristics
Aid in the process of coordinating source inspection
Review and approve of customer and internal First Article inspections (AS9102)
Performing internal audit activities including but not limited to quality management systems, purchasing, contract review process, and manufacturing.
Drive trend improvements on the internal and external Quality in support of strategic business objectives.
Act as a liaison for the production areas on matters related to contract review process and first article inspection
Identifying GE SSL (Source Substantiation List) and submitting GE SSP (Significant Process Substantiation).
Performing internal and customer corrective actions.

Qualifications:

Bachelor’s degree, preferably in Mechanical, Manufacturing or Industrial Engineering.
Minimum of 10 years Quality Engineering experience w/ 5 years experience directing Quality Engineering activities in an aerospace manufacturing (machine shop) environment.
In-depth working knowledge of Six Sigma with the ability to effectively apply recognized methods and techniques in a manufacturing environment (Green Belt or higher).
Ability to promote and foster a Continuous Improvement culture both internally and with our supplier’s (machining and special processing).
Strong understanding of contract review process and First Article Inspections.
Effective communicator – strong written and verbal communication skills.
Strong understanding of DMAIC, FMEA, PPAP, Statistical Process Control (SPC), Gage R&R Studies and lean systems.
Effectively apply appropriate problem-solving and continuous improvement techniques.
Ability to determine the appropriate dispositions for nonconforming product; function as quality representative at both Preliminary Review (PR) and MRB levels.
Internal quality audits – participate in both Internal Quality Management System (QMS) audits and customer audits (product and system).
General understanding of metallurgy; ability to understand the physical and mechanical properties of metals as affected by composition, mechanical working and heat treatments.
General understanding of subcontracted special processes (NDT, heat treating, shot peening, plating and surface treatments).
Strong understanding of AS9100 Rev. D.
Ability to create and process GE SPS (Significant Process Substantiation)
Will train and mentor lower level engineers.
Membership in ASQ – American Society for Quality
Proficiency in Minitab and excel
 
Job Number: 368587
Job Location: Simi Valley, CA
Per Diem: No
Overtime: Possible
Duration: Temp-Perm
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Linda Peck
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Engineer - FPGA and Digital Design

Description:
Location: Westminster, CO or Boulder, CO
Duration: 6 months contract to hire
Openings for Senior and Principal Engineers
Description:

•Work collaboratively and in tandem with FPGA verification engineers.

•Establish and maintain effective working relationships within the department, the Strategic Business Units, Strategic Support Units and the Company. Interact appropriately with others in order to maintain a positive and productive work environment.

Requirements:

•BS degree or higher in Engineering or a related technical field is required plus 5 or more years of related experience.

•Ability to own entirety of designs and understands radiation affects and FPGA.

•Expertise in VHDL.

•Experience with Xilinx Vivado.

•Experience with Spacewire, microsemi, and Vertex 5.

•Strong preference for Aerospace experience because of the need to follow peer structure, documentation, peer reviews etc.

•Each higher-level degree, i.e., Master’s Degree or Ph.D., may substitute for two years of experience. Related technical experience may be considered in lieu of education. Degree must be from a university, college, or school which is accredited by an agency recognized by the US Secretary of Education, US Department of Education.

•Strong Verification development methodology and test-benching for FPGAs.

•Strong software engineering skills, experience with System Verilog and OVM/UVM, C/C++, object-oriented design, and familiarity with electronic circuit design and electronic systems.

•A solid understanding of object-oriented concepts and experience designing class-based constrained random testbenches.

•Knowledge and experience with Windows, Unix and scripting languages (e.g. Ruby, Python, TCL) is a plus.

•Experience in documentation and verification of high-speed digital electronics, FPGAs, and embedded processor systems is desired.

•Ability to develop specifications, cost, schedule, and resource requirements for FPGA or ASIC verification plans.

•Military experience and/or ability to get a security clearance highly desired, but not required.
 
Job Location: Boulder, CO
Rate: DOE
Per Diem: Possible Split
Overtime: No
Duration: 6 month contract to hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Attention: Scott
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Staff Systems Engineer

Description:
Our Aerospace client is seeking a Senior Staff Systems Engineer for a 1-year contract that will be based in Centennial, Colorado. This position is responsible for the development and consistent application of systems engineering tools and processes to support Major Development projects/programs. The position also has a key role in ensuring continuous improvement of these same tools and processes.

This position is required to lead Multi-discipline project teams to evaluate customer operational needs and to develop and integrate system requirements. The successful candidate will be a self-starter that is able to work autonomously, learn, tailor and execute processes, and perform in a collaborative environment.

Responsibilities:

•Requirements development, integration, analysis, failure mode analysis, test methods, and operational process development

•Trade study development and management, risk, issue, and opportunity management

•Team and program execution planning, technical decision making, requirements verification activities

•Customer relationship communication, proposal support, and gate review preparation and execution

•Responsible for identifying and applying appropriate scaling of systems engineering activities commensurate with the specific project needs.

Qualifications:

•Bachelor or Masters Degree in Engineering or Applied Mathematics

•10-15 years of engineering and systems engineering experience

•Experience working with existing and evolving launch systems requirements

•Experience leading cross-functional learns in the performance of requirements analysis, development, integration, and verification: trade study management and risk management

•Organization skills necessary to maintain focus and achieve consensus within diverse multi-disciplined learns

•Experience developing. implementing, and tailoring systems engineering processes

•Experience with Word, Excel, and Power Point to include the integration of clu1rls for large presentations to the customer

•Ability to travel (10%)

Competencies/Requirements:

•This position requires knowledge or Systems Engineering and Integration processes and tools.

•Experience performing requirements development, integration, and verification management is required.

•Knowledge of existing and evolving launch system requirements desired.

•Experience leading multi-disciplinary teams to resolve technical and programmatic issues is required.

•This position requires excellent written and oral communication proficiency in conjunction with organization skills necessary to maintain focus and achieve consensus within diverse multi-disciplined teams.

•Internal and external customer interface activities will require strong communication skills.

The candidate should have demonstrated technical knowledge in areas: that drive launch vehicle design such as aerospace structural analysis and design, propulsion analysis and design, electrical analysis and design, software development, and system analysis.

Preferred Qualifications:

•Experience and background with previous large-scale launch vehicle programs.

•Experience and background with significant launch system and component development and upgrades.

•Experience with developing human rating strategies and requirements, and knowledge of potential upgrades to enable human-rated launch systems.

* Candidates must be authorized to work in the US for any employer.
 
Job Location: Westminster, CO
Rate: DOE
Per Diem: Possible Split
Overtime: No
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: ALLEGIANCE CONSULTING INC
Address: 10822 W TOLLER DR STE 250
City, State: LITTLETON, CO 80127
Phone: 720/947-9208
Website: www.acinow.net

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Engineer - Hydraulics

Description:
Position Summary: Under the direction of the Engineering manager, supervisor or director, the Systems Engineer III will support a development and certification program for a new commercial aircraft. The primary function will be to generate systems requirements, system architecture, and proposed placement in the aircraft for the system that will achieve compliance to all applicable regulatory & customer requirements. The Systems Engineer III is expected the candidate will provide guidance and direction to other engineers within the team and oversee their work.

Hydraulic Systems: Possesses a recognizable breadth and depth of expertise in Hydraulic systems, both architecture and installation.

Essential Duties and Responsibilities:

The Systems Engineer III will rely on extensive experience and judgment to plan and accomplish goals while performing a variety of complex tasks in the following areas:

Has been involved with a developmental and/or certification of recent aircraft program.
Has a detailed understanding of the regulatory requirements applicable to the discipline.
The ability and knowledge to develop FAA certification plans.
Able to interpret regulatory requirements and determine a method of compliance on a component or a system level.
Able to review, critique, modify system requirements and conference with applicable aircraft design system technical experts, flight test pilots and DERs to demonstrate that production components and flight test equipment meet regulatory requirements.
Able to perform root cause analysis and engage in resolution activities to overall system and flight test equipment operation activities.
Expected to be proactive and define the detail tasks necessary to accomplish task completion with minimal direction.
Has a proven track record of managing a team of Engineers.
Can prepare schedules and report status on assigned work packages.
Can identify, assess and report on program risks.
Independently develops ideas and solutions to promote the success of the program.
Serves as a technical resource to the team.
Has industry contacts that can facilitate the exchange of ideas and solutions.
Has strong communication skills and the ability to participate and lead a team composed of individuals from different countries and cultures.
Directs work of others and acts as lead.
Performs other duties as required.

Qualifications & Skills Requirements:

Bachelor’s degree in a related engineering field is preferred and a minimum of 10+ years of experience in Systems or 15+ years of experience in the Aerospace Industry or related field.
Master’s degree in engineering or equivalent experience is desirable.
Advanced working knowledge of MS Office products.
Basic working knowledge of CATIA V5.

Physical Requirements: Individual must be able to sit for extended periods of time, working at a desk and/or attending meetings. May occasionally require employee to stand and/or walk and occasionally lift and/or move up to 10 pounds. Will need to be able to move throughout the office and talk/hear or otherwise communicate with other employees and management. Work will be performed in an office environment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential duties of the job.

This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time.

LMI is an equal employment opportunity employer. Consistent with applicable law, LMI provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, LMI will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for LMI‘s Human Resources Department. LMI will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials.

LMI is an E-Verify Employer.

LMI is an Equal Employment Opportunity/Affirmative Action/Disability/Veterans Employer


COPY AND PASTE THE FOLLOWING LINK:
https://lmiaerospace.wd1.myworkdayjobs.com/en-US/LMI_Careers/job/LMI---San-Diego---Remote-California/Systems-Engineer-III---Hydraulic_R0005238
 
Job Number: R0005238
Job Location: Denver, CO
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: LMI AEROSPACE
Attention: Human Resources
Address: P O BOX 19879
City, State: SAN DIEGO, CA 92159
800 Phone: 800/677-7868
Website: www.lmiaerospace.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Systems Project Engineer

Description:
Sr. Systems Project Engineer

Location: Redmond, WA (98503)



Job Description

Provide leadership for new product introduction from conceptualization/business capture through component qualification and delivery.
Oversee development project schedules, budgets and resource allocation.
Support the development of new electromechanical systems for aerospace applications.
Including flight controls, brake controls and high precision utility actuation systems.

Break down system-level requirements and program documents from a customer into component-level requirements, software requirements, and individual tasks
Oversee or perform analysis to support system development – controls systems performance, safety analysis, etc.
Work with current and emerging motion control technologies – geared systems, motors, various sensor topologies, motor controllers and embedded systems
Support and direct testing of motion control systems from detail development tests through aircraft system integration tests.
Act as project focal for customers
Support proposal development for new projects and support new business capture initiatives
Provide mentoring to less experienced engineers


Qualifications:

Strong experience in development of electromechanical systems for air vehicles or space vehicles.
Experience with primary flight controls, secondary flight controls, high precision utility actuation or brake control systems a plus. Experience as a systems integration lead at an aircraft or spacecraft manufacturer a plus. Strong program management skills.
US citizenship or US permanent resident status is a requirement for this position.
B.S., M.S., or Ph.D in Engineering with broad exposure to electromechanical and embedded systems on air or space vehicles
15+ years of design, analysis, modeling, and testing experience
Excellent verbal and written communication skills
Excellent organizational and interpersonal skills


Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.



While performing the duties of this job, the employee is occasionally required to stand. The employee must frequently lift and/or move up to 15 pounds. Specific vision abilities required by this job including ability to adjust focus.



Work Environment and Safety Equipment Required: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of the job. Safety glasses, safety shoes and other designated personal protective equipment as required for the position.



Must wear safety glasses where required.





____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55210
Job Location: Redmond, WA
Per Diem: Possible
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: David Surreira
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Six Sigma Black Belt Consultant - California

Description:
Leading aerospace company are seeking an experienced Six Sigma Black Belt Process Improvement Engineer. The client's site is based in the greater Los Angeles area and they manufacture specialist products for civil and military aircraft.

The role requires Six Sigma Black Belt certification and will focus on continuous improvement and process development activities, with experience of forming/heat treatment and clean-up processes also of interest.

The initial contract will be at least 6 months, with the strong likelihood of further work beyond this.
 
Job Number: JO0000000196
Job Location: Los Angeles, CA
Rate: Negotiable
Per Diem: Possible
Overtime: Yes
Duration: 6 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Adrian Medhurst
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sourcer/Recruiter / High volume, full cycle aerospace/aviation/DoD recruiting experience required TX

Description:
Sourcer/Recruiter
Work Location: Fort Worth, TX
Status: Open

Qty: 1
Desired Start Date: 11/5/2018
End Date: 11/8/2019

Job Description:
Manages the strategic sourcing, recruiting, and local employment branding and marketing campaigns. Tracks success of branding, marketing, and sourcing efforts to demonstrate ROI and drive investment decisions. Drives brand awareness and the candidate value proposition for Aeronautics' Company to reinforce Lockheed Martin as the employer of choice. Performs sourcing for positions for which it has typically been difficult to recruit diverse talent or that require highly unique capabilities. Delivers available, diverse, qualified sourcing pools for recruiters to screen talent and prepare slates. Executes recruitment branding, marketing and outreach, and social media strategies through collaboration and partnership with stakeholders in Talent Acquisition, Talent & Organizational Capability, Communications and Community Relations, Corporate Talent Acquisition media and marketing, Workforce Strategy, Diversity and Inclusion, and Compensation, as well as relevant external organizations (e.g., vendors, community partnerships). Applies industry best practices and studies other organizations’ sourcing, branding, and marketing practices to continually strengthen the strategy and execution for Aeronautics. Utilizes Microsoft Office (Word, Excel, PowerPoint, Visio, Project) and other software tools/ solutions as needed. Performs other duties as assigned.

High volume, full cycle aerospace/aviation/DoD recruiting experience required.

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $16.00 - $42.00 Hourly
 
Job Number: JE-1231-1
Job Location: Fort Worth, TX
Rate: 42/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sourcer/Recruiter TX

Description:
163093
Sourcer/Recruiter
Location: Fort Worth, TX
Status: Open

Request: Technical/Professional - Sourcer/Recruiter
Qty: 1
Desired Start Date: 10/16/2018
End Date: 10/21/2019

The hiring manager is looking for someone with high volume, aviation/aerospace full cycle recruiting.

Job Description:
Manages the strategic sourcing, recruiting, and local employment branding and marketing campaigns for Aeronautics' Company. Tracks success of branding, marketing, and sourcing efforts to demonstrate ROI and drive investment decisions. Drives brand awareness and the candidate value proposition for Aeronautics' Company to reinforce Lockheed Martin as the employer of choice. Performs sourcing for positions for which it has typically been difficult to recruit diverse talent or that require highly unique capabilities. Delivers available, diverse, qualified sourcing pools for recruiters to screen talent and prepare slates. Executes recruitment branding, marketing and outreach, and social media strategies through collaboration and partnership with stakeholders in Talent Acquisition, Talent & Organizational Capability, Communications and Community Relations, Corporate Talent Acquisition media and marketing, Workforce Strategy, Diversity and Inclusion, and Compensation, as well as relevant external organizations (e.g., vendors, community partnerships). Applies industry best practices and studies other organizations’ sourcing, branding, and marketing practices to continually strengthen the strategy and execution for Aeronautics. Utilizes Microsoft Office (Word, Excel, PowerPoint, Visio, Project) and other software tools/ solutions as needed. Performs other duties as assigned.

Strong recruiting and sourcing background preferably in Aerospace. Knowledge of OFCCP a plus.

Region: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
 
Job Number: JE-1190-1
Job Location: Fort Worth, TX
Rate: 36/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sourcer/Recruiter – Level 2

Description:
Sourcer/Recruiter – Level 2

Location: Fort Worth, TX
Pay Rate: $37.14/hr
Duration: 1 year contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**

Job Description:
Manages the strategic sourcing, recruiting, and local employment branding and marketing campaigns for Company. Tracks success of branding, marketing, and sourcing efforts to demonstrate ROI and drive investment decisions. Drives brand awareness and the candidate value proposition for Aeronautics' Company to reinforce Lockheed Martin as the employer of choice. Performs sourcing for positions for which it has typically been difficult to recruit diverse talent or that require highly unique capabilities. Delivers available, diverse, qualified sourcing pools for recruiters to screen talent and prepare slates. Executes recruitment branding, marketing and outreach, and social media strategies through collaboration and partnership with stakeholders in Talent Acquisition, Talent & Organizational Capability, Communications and Community Relations, Corporate Talent Acquisition media and marketing, Workforce Strategy, Diversity and Inclusion, and Compensation, as well as relevant external organizations (e.g., vendors, community partnerships). Applies industry best practices and studies other organizations’ sourcing, branding, and marketing practices to continually strengthen the strategy and execution for Aeronautics. Utilizes Microsoft Office (Word, Excel, PowerPoint, Visio, Project) and other software tools/ solutions as needed. Performs other duties as assigned.

Additional:
-Bachelors required
-Strong recruiting and sourcing background preferably in Aerospace.
-Knowledge of OFCCP a plus.
 
Job Number: 9970
Job Location: Fort Worth, TX
Rate: 37.14
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Design Engineer w/Bachelor's

Description:
We are seeking a senior level structural design engineer for a client in Chula Vista, CA. 10+ years of aerospace experience plus a Bachelor's degree are required.

Send inquires to lleszek@butler.com and reference 54779.
 
Job Location: Chula Vista, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electromechanical Engineer

Description:
Sr. Electromechanical Engineer
Location: Orlando, FL (32819)

Secret Clearance required.

Our client is seeking a Senior PCB Designer with design experience of high density multi-layer using POWER, ANALOG and HIGH SPEED DIGITAL technologies using Mentor Graphics Tools Xpedition V2.3 and Designer V2.3. Design experience should include controlled impedance, terminators, diff pairs, stripline, dual stripline, DDR3, DDR4 and shielded traces on double-sided boards up to 36 layers and 5 gbps. HDI, fine pitch BGA’s, micro, blind and buried via experience is a must. Layout of flex and rigid-flex boards is a plus. HyperLynx DRC knowledge is a major plus.


Skill/Experience/Education:

Mandatory-Experienced in the use of Mentor Graphics Tools Xpedition V2.3, Designer V2.3 and Valor. Experienced in the layout of PCBs with DDR3 and DDR4, PCIe, GIGe using micro, blind, buried and back drilled vias. Valor experience necessary as well. Knowledge of IPC/Mil specs. Ability to obtain a security clearance

Desired-See above plus HyperLynx DRC, DxDatabook and Library Manager experience. Experience with Mentor Graphics Board Station, DaLMS and Fablink is also a plus.




____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55174
Job Location: Orlando, FL
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Recruiter UT

Description:
Request number: 5687

Sr. Recruiter
Number of openings: 1

Position location: Salt Lake - UT
Contract
OT exempt: No


Shift: 1st
Education Requirement: BS/BA
Driving on company time?: No
Maximum Hourly Pay Rate: 45
Start Date: 11/12/2018
Tentative End Date: 04/12/2020

Do you:
• Get excited when you find talent for hard to fill positions?
• Enjoy working with a fun and collaborative team?
• Flourish in an environment of accountability and responsibility?
Then keep reading...

Company was founded in 1951 with one product and a vision of company culture so strong it became the foundation of the multi-billion dollar company we are today. We operate within a culture of trust and mutual respect, allowing our employees to collaborate and produce cutting edge technology, as well as aiding our business in the ability to share goals and achieve them together. Our lines of precision motion control technology can be seen at the forefront of military and commercial aircraft markets, space exploration, and oil and gas markets, to name a few.

Seeking a top notch Sr. Talent Acquisition Partner to manage full lifecycle recruiting efforts by sourcing, screening, selecting and on-boarding the highest quality and best fit candidates to support our tremendous business growth. At Moog, our Sr. Talent Acquisition Partners have creative approaches to identifying difficult-to-find candidates, demonstrated expertise in screening candidates and clearly articulate techniques for quickly mastering expectations of highly selective hiring managers.

You’ll need to be able to “check your ego at the door,” have an entrepreneurial mindset, as if you have ownership in the company, and possess a sense of humility. The ability to communicate clearly, build relationships and be an influencer are critical to your success. Additionally, our Sr. Talent Acquisition Partners work well under pressure and thrive on challenges.

Essential job functions:
Our recruitment process includes:
• Partner with hiring leaders to accurately define position requirements and develop an effective sourcing strategy
• Executing the sourcing strategy: researching, shortlisting, interviewing, and presenting candidates
• Proactively provide updates to hiring team and candidates
• Facilitating selection decisions
• Extending offers

Required skills:
What you need to bring:
• Several years of experience managing full life cycle recruiting - working directly with hiring managers and sourcing talent
• Experience working with Taleo or similar applicant tracking system
• Well-developed interpersonal skills that will help you build relationships, influence others and represent the Talent Acquisition team in various settings inside and outside the organization
• A background in Aviation / Aerospace recruitment is advantageous, but not essential

Experience that will position you for success:
• Having been a Corporate Recruiter, preferably in an Engineering environment
• Worked as an Account Manager at a staffing agency
• Experience sourcing talent at a staffing agency
• Experience in marketing
• Bachelor’s degree

Scope: Sr. Talent Acquisition Partner
Length of Assignment: Temp to hire
Location: Salt Lake, UT 84119
 
Job Number: MB-5687
Job Location: Salt Lake City, UT
Rate: 45/hr max
Per Diem: no
Duration: 5 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Stress Engineer

Description:
Job description
Stress Engineer

Apply your leadership and technical knowledge in a professional role
Collaborate with leaders from multiple teams and different sectors
Work within a global organization – position located in Winnipeg, Manitoba

About the Role

We are looking for a Stress Engineer to join our team and work for our global client based in Winnipeg, Manitoba


Responsibilities:
Perform structural design studies from the pre-design stage through certification files
Create digital representation. To simulate, using different software, the performance of one or several parts of aircraft structures
Produce numerical simulations using finite element softwares
Perform RDM stress analysis via existing tools or by tools developed by the engineer (Macro VB, Matlab ...)
Write summary or certification reports
Conduct structural design studies from preconception phase to certification records
Produce and / or evaluate possible design solutions to improve quality, cost, weight and performance based on traditional strength calculations
Create a digital representation. Simulate, using a different software, the performance of one or more parts of aircraft structures
Produce numerical simulations using finite element software
Perform RDM stress analyzes using existing tools or tools developed by the engineer (Macro VB, Matlab ...)
Write summary or certification reports
Qualifications:


Bachelor or Master’s degree in Mechanical or Aerospace Engineering
5 - 15 Years of experience in aircraft interior monuments Stress Analysis
Very strong understanding in Engineering Mechanics and Strength of Materials
Experience in hand calculations using Bruhn , Niu and ESDUs
Hands on Experience in Finite Element Analysis using PATRAN / NASTRAN for Aircraft interior monuments such as Galleys , Wardrobes and cabinets etc
Hands on experience in Cabin interior retrofits
Through understanding of TCCA - FAA certification requirements
Very Good Communication and Coordination skills
Where you will be working

You will have the chance to join an incredibly diverse and global team of engineering. You will be invited to put your expertise in challenging project around the world.

About us

We are at the heart of a technological revolution that will permanently transform our patterns of mobility, consumption, production and communication.
We are the biggest industrial players to design the products and services that will make the world of tomorrow. We are recognized by our clients for our ability to carry out such projects, with rigor, efficiency and sense of service, in compliance with our commitment to quality and our values.

Creating the new Engineering 4.0

ASSYSTEM TECHNOLOGIES valued opportunities opened by this new technological age very early on. For industry 4.0, we are designing products and services, projecting their applications into the future and anticipating the next round of developments. We are dreaming up tomorrow’s world.

Excited to start a new challenge? Apply Now!

Please note, to be successfully considered for this role you must complete all pre-screening questions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or protected veteran status, or any other legally protected basis, in accordance with applicable law
 
Job Number: 2555
Per Diem: Yes
Overtime: Yes
Duration: 6 month ocntract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: EXPLEO USA INC
Attention: Faith Brooks
Address: 220 W DOUGLAS AVE STE 250
City, State: WICHITA, KS 67202
Phone: 316/264-3778
Website: www.expleogroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Engineer

Description:
Sr Systems Engineer 2
Location: Cedar Rapids, IA
6 month contract

Job Responsibilities:
•Performing all phases of the system development lifecycle including requirements capture, system design and modeling, integrating with hardware and other software components, system validation and verification.
•Working with external customers to document operational scenarios, develop system requirements, define system interfaces and system validation testing.
•Working with other systems engineers and other engineering disciplines to document derived requirements, define internal system interfaces, develop system architectures, integrate system components, and perform system verification.


Basic Qualifications include 7-10 years experience with:
•BS Degree
•Developing hardware, software or firmware for high-assurance, embedded systems, or systems design experience with such applications.
•Requirements capture, flow-down, validation and verification.
•Requirements management tools such as DOORs.
•Test development using scripting languages such as Python.
•Standard Lab equipment such as Ethernet network analyzers, digital databus analyzers and oscilloscopes.


Preferred, but not required, experience/skills with the following:
•Experience with safety-critical, real-time, embedded system development is highly desirable.
•Experience with avionics or other aircraft system development and certification.
•ALM suite of tools (JAMA, JIRA, Confluence, Bamboo, etc.)
•Experience developing systems that are compliant with ARP-4754, RTCA DO-178, DO-160 and DO-254.
•Experience with ARINC standards ARINC 429, ARINC 664 and ARINC 661.
•Model-based development experience.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55241
Job Location: Cedar Rapids, IA
Rate: Open
Per Diem: Possible
Overtime: No
Duration: 6+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
PDS Tech, Inc. is seeking an Staff Electrical Engineer, in Phoenix, AZ.

•The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
•The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
•Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation.
•Also includes managing Problem reports for hardware that has already been delivered.
•The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment.
•As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.

Education
•BS degree in Electrical engineering, with 6+ years of experience, a Master's degree preferred.
•US Citizenship.

Basic Qualifications
•Design responsibilities include architecture, development and analysis of: high speed digital systems comprised of microprocessors, microcontrollers, DSPs, FPGAs and high speed communication links.
•Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
•Support current production designs including quality improvements, cost reduction, component obsolescence and failure analysis.
•Evaluate and approve electronic components to meet requirements for availability, performance and cost.
•Support project planning efforts and ensure execution to schedule and budget.
•Evaluate failures to determine root cause and corrective actions.
•Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
•Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.

Preferred Qualifications
•Experience with high reliability controller electronics and power switching circuitry.
•Strong experience in hardware and firmware developed in accordance with the requirements of DO-254 (DAL A).
•Familiarity with software developed in accordance with the requirements of DO-178B or DO-178C Level A.
•Experience working in Cadence Sigrity.
 
Job Number: 1810093238
Job Location: Phoeniz, AZ
Per Diem: Split
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Electrical Engineer

Description:
Staff Electrical Engineer

Location: Phoenix, AZ
Pay Rate: $68/hr
Duration: 12 month W2 contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

-The Staff Electrical Engineer will work with a global team of engineers in Phoenix and India, on electronic control units for aerospace applications.
-The role will support the entire design life cycle from project planning efforts to entry into service and production transition support.
-Requirements definition using DOORS, detailed design, validation of requirements and verification of implementation. Also includes managing Problem reports for hardware that has already been delivered.
-The successful candidate will be a highly motivated self-starter with strong written and oral communication skills and works well in a team environment. As a Staff Electrical Engineer, this role will lead and mentor other electrical engineers throughout the entire design life cycle and support project planning efforts and ensure execution to schedule and budget.
-BS degree in Electrical engineering, with 6+ years of experience, a Master's degree preferred.

Basic Qualifications
• Design responsibilities include architecture, development and analysis of: high speed digital systems comprised of microprocessors, microcontrollers, DSPs, FPGAs and high speed communication links.
• Create documentation including hardware design plans, technical requirements, functional specifications, design specifications, qualification test plans and reports.
• Support current production designs including quality improvements, cost reduction, component obsolescence and failure analysis.
• Evaluate and approve electronic components to meet requirements for availability, performance and cost.
• Support project planning efforts and ensure execution to schedule and budget.
• Evaluate failures to determine root cause and corrective actions.
• Interface and support validation, verification and manufacturing engineers and technicians with product and manufacturing testing.
• Apply knowledge of DOE, FMEA, tolerance analysis, simulation and statistical methods to improve robustness and quality of electronic designs.
• It is desirable that the candidate has experience with the activities listed below for Highly Complex COTS components operating in the GHz bus frequency range.
a. Digest vendor SOC documentation (data sheets, user manuals, app notes, errata, …) to develop constraints and requirements for H/W implementation
b. Effectively work with the software team to develop configuration register settings
c. Perform shared resource analysis
d. Perform configuration settings and failure analysis e. Knowledge of accommodation/mitigation techniques for undocumented features, vendor micro code, configuration fault anomalies
e. Perform programmable logic requirements definition
f. Knowledge on component selection and trade studies
g. Capable of programming code on development boards for design and initial board functional checkout
h. Perform power sequencing analysis Experience with the full DO-254 aerospace hardware development and certification lifecycle including: electrical architecture design, requirements analysis & development, electrical design, development & integration, and qualification testing (DO-160, MIL-STD-461, MIL-STD-810).
 
Job Number: 9946
Job Location: Phoenix, AZ
Rate: 68
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Strength Engineer - Level 2

Description:
Location: Centennial, CO
Duration: 3 month contract (possibility of extension)
Pay Rate: DOE
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Strength Engineers to conduct strength analysis for structural design for the launch vehicle upper stage.
- The strength analysis will include finite element analysis and hand calculations of components, small assemblies, and large assemblies.
- Finite element analysis will use NASTRAN/FEMAP.
- Familiarity with non-linear analysis and material plasticity using NASTRAN and ABAQUS.
- Knowledge of super-elements will aid in efficient non-linear analysis.

Education:
- Requires a bachelor’s degree and 4 -8 years of experience.
- Need candidates with 5 years of experience.
- Must have 3+ yrs experience with Nastran/Femap.
- Prefer aerospace industry background.
 
Job Number: 9746
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Strengths Engineer - Level 3

Description:
Location: Centennial, CO
Duration: 3 month contract
Pay Rate: DOE
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Strength Engineers with 8 yrs exp to conduct strength analysis for structural design for the launch vehicle upper stage.
- The strength analysis will include finite element analysis and hand calculations of components, small assemblies, and large assemblies.
- Finite element analysis will use NASTRAN/FEMAP.
- Familiarity with non-linear analysis and material plasticity using NASTRAN and ABAQUS.
- Knowledge of super-elements will aid in efficient non-linear analysis.

Requirements:
- Need candidates with 8 years of experience.
- Must have 3+ yrs experience with Nastran/Femap.
- Prefer aerospace industry background.
- Bachelor's Degree required.
 
Job Number: 9983
Job Location: Centennial, CO
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 3 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Stress Engineer

Description:
Stress Engineer

Location: Independence, OH
Pay Rate: $65/hr
Duration: 12 month W2 contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
*No relocation compensation*

Description:
-Bachelors degree required
• Expert knowledge of strength, stability, residual strength, fatigue and fracture analyses of detail designs of landing gear structural components using both computer modeling and analysis methods and classical calculation methods.
• Construct and analyze finite element structural models using Nastran/ABAQUS
• Construct beam “stick” models and generate internal loads
• Perform preliminary sizing and detailed analysis of major structural components using classical analysis and FEA methods in support of preliminary design effort and formal drawing release
• Assist with preliminary design trade studies
• Prepare high quality detailed stress reports for customer review and MRB support
• Review drawings with other company disciplines and provide structures input
• Analyze structural repairs for landing gear and systems structural components
• Working Knowledge of CATIA V5
• Good understanding of aerospace materials and manufacturing processes
• Responsible and accountable for all assigned stress tasks and its completion dates
• Ensure compliance to UTC engineering methodologies. 5 yr minimum exp
 
Job Number: 9653
Job Location: Independence, OH
Rate: 65
Per Diem: No
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural & Payload Design Engr 4

Description:
Seeking 10 Structural & Payload Design Engineer's 4 located in Everett, WA

RESPONSIBILITIES:
Work location in Puget Sound, site detail will be determined by assigned manager at start.
Develops, integrates and documents structural and interior payload system requirements to establish the system design. Develops, maintains and modifies structural and interior payload system and component designs, using 3-D Computer Aided Design tools and/or other design methods, to provide product definition to other engineering groups, production operations, suppliers and external customers throughout the product lifecycle. Leads performance, integration and analysis of tests to validate and verify systems and components meet requirements and specifications. Manages supplier development, test and production activities and coordinates with the supplier to optimize the design and achieve program goals. Assists with investigation of emerging technologies to develop concepts for future product designs to meet projected requirements. Works under minimal direction.


EDUCATION:
Accredited Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Mechanical, Aeronautical / Aerospace, or Civil engineering degrees are highly preferred.

WORK HOURS:
Full-Time/First Shift
7 AM - 3:30 PM
 
Job Number: 174892
Job Location: Everett, WA
Rate: $65.80/hr - $73.10/hr
Per Diem: Yes
Overtime: Yes
Duration: 6 mths.
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Richard Barrett
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineer II / ABAQUS Hypermesh TX

Description:
163471 Structural Analysis / Sr. Mechanical Engineer II


Work Site Address: Dallas TX
Job Number: 8752322
Max Pay Rate: 75.00
Start Date: ASAP
End Date: 6-12 Months
Position Type: Contract

Mechanical Engineer to support an airborne structure program in Dallas, TX. The selected candidate will be responsible for conducting detailed structural analysis using ABAQUS/CAE to support the design and optimization of the product. The tasks will include detailed part modeling and analysis based on inputs from a loads model, as well as working with the loads model itself. The analysis tasks will include assessing part designs for static and dynamic strength, fatigue, and durability. The selected candidate will work under general direction of the structural analysis team and will be accountable for completing the work within the agreed upon cost and schedule. Intermediate to advanced knowledge of ABAQUS/CAE is a requirement, as ABAQUS/CAE is the tool of choice for this project. Experience with Hypermesh can be considered in addition to ABAQUS/CAE.


Qualifications and Education Requirements
Required Skills
Understanding of finite element structural analysis Intermediate or Advanced knowledge of ABAQUS/CAE and/or Hypermesh
Experience with MS Office (Word, Excel, PowerPoint) Ability to manage multiple priorities

Desired Skills
Weight optimization experience Vibration and dynamics experience Fatigue/damage tolerance experience.
Experience with aircraft primary structure design/analysis
Knowledge of commercial CAD software, such as CREO Programming skills in Python language
Experience with AFGROW

Required Education Must have a B.S. or higher from an accredited university with a major in Mechanical Engineering, Aerospace Engineering, Computer Science, Math, or other related field
 
Job Number: MB-R8752322
Job Location: Dallas, TX
Rate: 75/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Design Engineer - Level 2

Description:
Location: Centennial, CO
Duration: 3 month contract (possibility of extension)
Pay Rate: DOE
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- Design Engineer with 5 years of overall experience in Structural Design.
- Perform structural design of hardware on the Vulcan launch vehicle upper stage.
- Hardware includes components, small assemblies, and large assemblies.
- Designer needs to be experienced in NX11 CAD modeling (3+ yrs experience).
- They should also have experience with designing metals for machining and assembly.
- Experience with test documentation preferred.
- Prefer aerospace industry background.

Education:
- Requires a bachelor’s degree and 2 - 6 years of experience.
 
Job Number: 9748
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 3 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural/Stress Engineer

Description:
Structural/Stress Engineer

Location: Chula Vista, CA
Pay Rate: $65/hr
Duration: 6 month contract
Shift: First
**MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**
**NO RELOCATION COMPENSATION**

Description:
Requires an experienced engineer with Actuation systems stress background and who can work independently with minimum supervision. The candidate must be proficient using MSC PATRAN (a minimum of 5 years of experience), NASTRAN various solutions such as Soln 101, 106 and 111 and MS Office. A general understanding of propulsion systems load path, stress analysis and basic CATIA skills are also required. The candidate must have good communication skills and work well in a team environment. Primary responsibilities include but not limited to creation of Loads reports, Analysis Records and Certification reports needed to support Actuation deliveries. Structural (dynamic and static) stress calculations in Aerospace or engine propulsion environment is required. Review and approval of Qualification reports.

Additional/Requirements:
-Must have 5+ years experience in Aerospace Structural/Stress Engineering.
-Must have background in mechanical systems structures analysis (classical hand analysis and finite element skills).
-Nastran & Patran experience a big plus.
-Aircraft/airframe stress experience a must.
-Must have good communication skills and be team oriented.
-PC/Unix computing skills a plus.
-Bachelors degree a must.
 
Job Number: 10042
Job Location: Chula Vista, CA
Rate: 65
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supplier Quality Engineer

Description:
Location: Chula Vista, CA
Rate: $38.59/HR
Duration: 1 year contract
Shift: 1st Shift
OT: Possible
Per Diem Split: No

****MUST be a U.S. Citizen****
****MUST have a Bachelor's Degree****

Job Description:
- The SQE will be responsible for executing and expanding on key initiatives inside of the supplier quality organization.
- The ideal candidate will have demonstrated problem solving skills, be able to run quality projects and have ability to be flexible in high pressure situations.
- The SQE will be responsible for implementing, monitoring, approving and/or closing projects for escape containment and corrective action, defect elimination, ASQR-01 (AS9100) related audits findings/follow up, FAI process, UPPAP requirements and inspection sampling plans in the supply base.
- Report outs on plan and progress (CAB's) will be made to executive team on a regular basis.
- US travel will be required to aid supplier in training and closing actions.
- The SQE will have a working knowledge of DFMEA, PFMEA, measurement systems analysis, process control plans, process flows, key process input/output analysis, and first article reports (AS9102).
- Responsibilities will also include supporting/leading supplier quality meetings/reviews and weekly stand up meetings in front of Quality & Supply Chain Leadership.
- Comprehensive knowledge and understanding of relevant procedures/requirements is necessary.
- The SQE will own/participate in process, procedural and standard work development and updates.
- The SQE will have the opportunity to identify an area of improvement within the organization and hold an event (kaizen or similar) to solve the problem.

Experience Required:
- 4 - 7 years of experience in engineering or quality engineering field related to the manufacture of Aerospace Components, Automotive Structures or Department of Defense.
- Should have experience in quality system, project management, product, or technical process and application of quality at a manufacturing site.
- Helpful to have experience in SPC, APQP, PPAP.
- Strong P.C. skills.
- Strong communication skills and experience with cross functional teams.

Must have skills:
- BS in Aerospace/Mechanical Engineering/MFG Technology/Quality.
- MFG and/or QA background.
- Strong SPC background (AS 9103).
- Demonstrated leadership capability.

Preferred skills:
- Lean MFG. experience, Digital Product Definition & Model Based definition experience.
- Experience with advanced aerospace components manufacturing, machining, and assembly.
- Project management.
- APQP, PPAP, and Six Sigma.
 
Job Number: 9948
Job Location: Chula Vista, CA
Rate: $38.59/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Supply Chain Tech Coordinator 3 CA

Description:
Supply Chain Tech Coordinator 3 (Job Number: 18017166)

Number of Openings: 1

Location(s): United States-California-Redondo Beach


Shift: 1st Shift

Target Start Date: Oct 29, 2018

Target End Date: Oct 25, 2019

Title: Supply Chain Tech Coordinator 3

Rate: $28-$33/hour

Location: Redondo Beach, CA

Positions: 1

Duration: 12 Months

Shift: 1st Shift - 9/80

Clearance: None

Northrop Grumman Aerospace Systems has an opening for a Supply Chain Tech Coordinator 3 to join our team of qualified, diverse individuals. This position will be located in Redondo Beach, CA.

Responsibilities

•Supports a team-based materiel organization.
•Performs daily physical inventory counts and data entry to applicable MRP system.
•Create cycle count reports and generate accuracy reports.
•Coordinate with warehousing personnel to resolve inventory discrepancies.
•Process inventory adjustment requests from the warehouse in the SAP or PIOS+ MRP systems.
•Update inventory accuracy metrics using Microsoft Office and distribute to the appropriate management team on a weekly basis.
•Attend inventory control meetings to discuss inventory management issues.
•Perform periodic audits in support of internal or external activities affecting the Global Supply Chain organization.


Basic Qualifications:

•AA or other 2 year technical degree and 3 years of experience in Manufacturing.
•Ability to obtain and maintain DOD Secret Clearance.
•Experience with Federal Acquisition Regulation (FAR)/ Defense Federal Acquisition Regulation Supplement (DFARS)
•Experience with Systems, Applications and Products (SAP)
•Experience with MS Office Suite


Preferred Qualifications:

•Active DoD Secret Clearance
•Bachelors Degree in Supply Chain
 
Job Number: MB-1670ATO
Job Location: Redondo Beach, CA
Rate: 33/hr max
Per Diem: no
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Safety Engineer

Description:
System Safety Engineer
Location: Cedar Rapids, IA
12 month contract

This engineer will be responsible for performing System Safety Engineering tasks on new development programs, typically involving flight deck avionics, communication or navigation radios.

Basic Qualifications:
• Bachelor's degree in a Science, Technology, Engineering or Math (STEM) discipline.
• Basic circuit analysis knowledge is required.
• Ability to read schematics and BOMS
• Basic knowledge of reliability techniques (RA's and FMEA's)
• Knowledge of writing technical reports

Qualifications Include:
1. Knowledge of MIL-STD-882E (DoD System Safety Standard Practice) and SAE ARP 4761 (Civil Aviation Safety Assessment Guidelines / Methods)
2. Prior experience applying MIL-STD-882E and/or SAE ARP 4761 System Safety assessment techniques in the design of safety-critical products, preferrably for military end-users.
3. Prior experience in the creation of Fault Tree Analyses and use of fault tree tools.
4. Familiarity with change management and requirements management tools
5. Familiarity with typical Reliability Engineering reports (e.g. Failure Modes Effects Analysis) and primary factors defining their suitability for use in safety assessments
6. A solid working knowledge of Microsoft Office tools is highly desirable.


Pilot training / flight experience is a plus, as is a practical knowledge of physics relevant to physical equipment hazards.



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 54917
Job Location: Cedar Rapids, IA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 12 months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Systems Engineer

Description:
Location: Centennial, CO
Duration: 1 year contract
Pay Rate: DOE
Overtime: Exempt
Per Diem Split: Yes (if eligible)

****MUST be a U.S. Citizen****

****Looking for candidates with Development Systems Engineering Experience (Preferably with Aerospace or Satellites) but not with a software focus****

Job Description:
- This position is responsible for the development and consistent application of systems engineering tools and processes to support Company Major Development projects/programs.
- The position also has a key role in ensuring continuous improvement of these same tools and processes.
- This position is required to lead Multidiscipline project teams to evaluate customer/operational needs and to develop and integrate system requirements.
- Leads Major Development systems engineering activities including:
a) Requirements development, integration, analysis, failure mode analysis, test methods, and operational process development
b) Trade study development and management
c) Risk, issue, and opportunity management
d) Team and program execution planning
e) Technical decision making
f) Requirements verification activities
g) Customer relationship communication
h) Proposal support
i) Gate Review preparation and execution
- Responsible for identifying and applying appropriate scaling of systems engineering activities commensurate with the specific project needs.

Competencies:
- This position requires knowledge or Systems Engineering and Integration processes and tools.
- Experience performing requirements development, integration, and verification management is required.
- Knowledge of existing and evolving launch system requirements desired.
- Experience leading multi-disciplinary teams to resolve technical and programmatic issues is required.
- This position requires excellent written and oral communication proficiency in conjunction with organization skills necessary to maintain focus and achieve consensus within diverse multi-disciplined teams.
- Internal and external customer interface activities will require strong communication skills.
- The candidate should have demonstrated technical knowledge in areas that drive launch vehicle design such as aerospace structural analysis and design, propulsion analysis and design, electrical analysis and design, software development, and system analysis.
- The successful candidate will be a self starter able to work autonomously, learn, tailor and execute processes, and perform in a collaborative environment.

Basic Qualifications
• Bachelor or Masters Degree in Engineering or applied mathematics
• 10-15 years of engineering and systems engineering experience.
• Experience working with existing and evolving launch systems requirements.
• Experience leading cross-functional learns in the performance of requirements analysis, development, integration, and verification: trade study management and risk management.
• Organization skills necessary to maintain focus and achieve consensus within diverse multi-disciplined learns
• Experience developing/implementing and tailoring systems engineering processes
• Experience with Word, Excel, and Power Point to include the integration of clu1rls for large presentations to the customer
• Ability to travel (10%)

Preferred Qualifications
• Experience and background with previous large-scale launch vehicle programs, including the Alias and Della families.
• Experience and background with significant launch system and component development and upgrades.
• Experience with developing human rating strategies and requirements, and knowledge of potential upgrades to enable human-rated launch systems
 
Job Number: 9743
Job Location: Centennial, CO
Rate: DOE
Per Diem: Split Possible
Overtime: Exempt
Duration: 1 yr
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Equipment Engineer

Description:
Test Equipment Engineer

Pay rate depends on experience (estimated range of $50-60/hour)

The Electronic Systems Center is seeking a Test Equipment Engineer in Phoenix, AZ.

This position requires an innovative, highly motivated technically savvy incumbent with strong leadership skills.

Additional responsibilities to include embracing and facilitating design synergy between development, production and customer test stands to maximize reuse, adaptability and efficiency.

The ideal candidate will have the ability to translate high level vision/plans into workable packages and continuous improvement capabilities.

• The Test Equipment Engineer is expected to work as the team lead with Electrical, Mechanical and Software Engineers providing electronic test equipment.

• This role is also responsible for design, fabrication, programming, and validation of multiple test stands.

• Manage a suite of test stands that are supporting the life cycle of the product. Work may be required to adapt/modify stands during software development, hardware/software verification or production testing on the controllers.

• Develop new applications or modifications of existing products.

• Modify the existing test equipment software.

• Design/validate hardware to support new applications or resolve outstanding issues (e.g. harness, board, chassis designs).


• Create/modify CAN configuration files in LabVIEW.

• Create/modify ARINC 429 database in Ballard CoPilot format.

• Create software load utility to simultaneously access and load software to units.





Basic Qualifications

• Minimum 8 years of experience in the design, fabrication, and validation of industrial test equipment

• Ability to read and interpret engineering drawing and schematics

• Digital and Analog circuit design experience

• Schematic capture experience

• Strong analytical, interpersonal and communication skills. Must be autonomous (self-starter) and be able to problem solve.

• Strong knowledge of National Instrument's LabView and Teststand programming languages

• An ability to lead a team, decipher and guide others in the creation of complex software architecture.

• Proven ability to master several test equipment components of a project or program simultaneously (can't get lost in the details).

Preferred Qualifications

• VeriStand experience

• Experience leading teams across multiple sites

• Knowledge of PWB layout methodologies

• IBM Rational DOORS

Bachelor's Degree
US Citizen



____________________________________________________________________

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 55192
Job Location: Phoenix, AZ
Rate: DOE
Per Diem: split
Overtime: possible
Duration: 12+ months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Thermal and Anti-Ice Engineer

Description:
• Thermal and Anti-Ice Engineer will be responsible for developing the subsystems requirements, architectures, roadmaps, and overall development of the subsystem from concept through certification.
• The candidate must be a subject matter expert in the relevant subsystem and have a thorough technical understanding of development of the subsystem.
• The candidate will be knowledgeable of FAR 25 certification requirements for the subsystem and subsystem components.
• Thermal and Anti-Ice Engineer will be responsible for the design of the relevant subsystems of the AS2 supersonic business jet to meet market and certification requirements.
• The successful candidate will have a commanding and fundamental understanding of how to design, analyze, and certify the relevant subsystem and have expert level knowledge of system integration into the aircraft.
• The candidate should be regarded as the technical subject matter expert for the relevant subsystem.

Basic Qualifications:
• BS degree or higher in mechanical/aerospace engineering.
• Minimum of seven years senior level technical experience in Thermal and Anti-Ice design and certification required.
• Experience with design and certification of FAR 23 or FAR 25 subsystems required.
• Strong technical, interpersonal, communication, administrative, and presentation skills. Demonstrated leadership in solving technical challenges.
• Significant experience on aircraft design teams, from concept through certification, in a collaborative multi-discipline team environment.
 
Job Number: 42-006
Job Location: Reno, NV
Rate: DOE but very competitve
Per Diem: YES
Overtime: YES
Duration: 1 year plus
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer

Description:
• Must have direct tool design experience with CATIA
• Large tool design experience is a must (not just small tools).
• Must understand GD&T (not just familiar)
• Must have experience with assembly, fixtures and jigs
• Must have at least 5 years of Aerospace experience and preferably at least 5 years tooling (the more the better since there is the potential for a senior level role)
• Automated tooling experience required to include pneumatics, hydraulics and other moving parts

Top Skills: Large parts design (not just small tools), Catia V5, GD&T

The Structures Company is an AA/EOE.
 
Job Number: 214
Job Location: NC
Rate: $50/Hr.
Per Diem: Yes
Overtime: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Design Engineer (4 needed)

Description:
The Tooling Engineer is responsible for clarity, standard conformity, interface compatibility, dimensional accuracy, and ease of manufacturing for all checking layouts and drawings, including advising management of potential tooling issues.

Essential Functions:
1. Checks completed layouts and drawings for: clarity, completeness, conformity to standards, procedures specification, critical interface compatibility, producibility aspects, dimensional accuracy of calculations and geometric tolerancing.
2. Investigates design factors such as ease of manufacturing, availability of materials and equipment, interchangeability; replaceability, strength – weight efficiency.
3. Examines designs for proper application of geometric dimensioning and tolerancing (GD&T), conducts analysis of tolerances to ensure correct assembly fits.
4. Advises the Manager/Supervisor of Tool Engineering regarding all tooling related matters of significance which impact, or have potential to impact, the Manufacturing responsibility.
5. Recommends changes to existing tool designs related to cost reduction or obsolescence.
6. Must have experience with assembly, fixtures and jigs

Requirements:
1. Bachelors Degree or equivalent experience
2. 10+ years of tool design experience
3. 5,000+ Hours of Catia V5 experience required
4. Teamcenter engineering

Knowledge, Skills and Abilities:
1. Broad knowledge of aerospace tooling and fabrication processes.
2. Strong Knowledge in the use of GD&T per ASME Y 14.5 Standard.
3. Strong oral and written communications skills.
4. Working knowledge of Microsoft Office Suites (Word, Excel, PowerPoint, and Lotus Notes).
5. Experience working in SAP and TcE strongly preferred.
6. Thorough understanding of blueprint reading.
7. Prior drawing generating and checking experience is preferred.
 
Job Number: 28-025
Job Location: Greensboro, NC
Rate: up to $55
Per Diem: YES
Overtime: YES
Duration: 1 year+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Designer

Description:
Investigates and develops complex equipment and tooling concepts and specifications to satisfy aerospace product design and build requirements.
Participates in design reviews, collects design requirements, creates and revises drawings and models, researches the application of robotics, automation and new technology to support the build plan.
Creates off-load packages, specifications, purchase requests and usage instructions for equipment and tooling.
• Checks designs for compliance with safety, producibility, maintainability, reliability, ergonomic factors and regulatory requirements.
• Develops and documents equipment and tooling inspection and usage instructions, preventative maintenance plans, and user training.
• Provides technical support for engineering changes and discrepancies by investigating problems and analyzing data to identify solutions.
Maintains hardware and software configuration. Assesses and makes recommendations for disposition of equipment and tooling.
AA degree(or Above) Required
 
Job Number: 1132018
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6 mon
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INNOVA SOLUTIONS, INC
Attention: Shailendra Mishra
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.innovasolutions.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Training Systems Specialist-LB

Description:
Qualifications
• Experience writing technical training courseware
• Excellent verbal and written communication skills
• Ability to work effectively in a team, very strong employee focus
• Ability to self-manage activities based on given priorities
• Experience with MS Office
• Must be a U.S. citizen or permanent resident (current Green Card holder)

Desired
• 8+ years of writing experience in a technical environment
• 8+ years of experience in Aerospace or related fields
• Airframe and/or Power Plant license
• Familiarity with NASA Workmanship standards, IPC J-STD, ISO-ASTM standards3
• Experience with adult learning, course design, and class evaluation

Responsibilities
• Develop specialty courses of instruction for identified needs; working with a wide variety of individuals while researching courses.
• Develop manufacturing, assembly, and test technical courses to meet company needs which may include, conducting workforce research and needs analysis, and capturing Subject Matter Experts (SMEs) knowledge. The subject courses could be Structural Assembly, Tubing Installation, Cork bonding, Torque, Lockwire, Electrical Bond, Alodine Application, Precision Measurement, Orbital Tube Weld etc.
 
Job Number: LB
Job Location: Kent, WA
Rate: 44+
Per Diem: Possible
Overtime: Possible
Duration: 4-6 mo(+)
Input Date: 11/14/2020
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Lindsay
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

Back to Advanced Job Search