Job Search Results

918 listings were found that matched your search words: Keywords: Software ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/06/18 Monday 12:43AM Pacific Time by ContractJobHunter. )

Listings 1 - 918

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
9 Mechanical Systems Design - Active Sceret Clearance

Description:
Active Secret Clearance Required (background investigation has to have been completed or updated within the last 5 years).
Experience with all type of aircraft systems design including, flight controls, ECS, fuel systems, wire routing, etc.  Must also have experience with UG (NX+), as well as Catia V5.  Apply knowledge of engineering principles and techniques to the design and development of mechanical or electrical operating systems. Ability to evaluate designs and perform trade studies for performance, functional adequacy, cost effectiveness, and regulatory compliance. Ability to develop specifications and oversee supplier hardware development, test, and certification programs. Knowledge of thermal analysis, stress analysis, material selection, packaging methods, routings and installation in aircraft environments. Knowledge of drafting and dimensioning fundamentals. Knowledge of three dimensional CAD software for development of details, assemblies, and installation drawings. Areas of expertise may include design of hydraulics, pneumatics, miscellaneous fluid systems, mechanisms, wire harness, and electrical equipment installation.

THE STRUCTURES COMPANY IS AN AA/EOE
 
Job Location: Wichita, KS
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: Long-term
Start Date: ASAP
Input Date: 06/27/2017
Last Updated: 07/11/2017
Firm Name: STRUCTURES COMPANY LLC
Attention: Chris Sheets
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistant

Description:
We are looking for an Administrative Assistant to work in our Recruiting / Sales Office in Lakeville, MA. This is a full-time position Monday thru Friday from 9:00 – 5:00. In addition to the general duties listed below, the Administrative Assistant will be asked to be the liaison to our Payroll and Finance Department located at our Corporate Office in Portland, ME.

Responsibilities:

The Administrative Assistant will manage the administrative day-to-day activities including, but not limited to:
* Answers, screens, and directs incoming telephone calls.
* Responds to routine and non-routine inquiries as appropriate.
* Schedules appointments, assists with travel plans, arranges meetings, and prepares required materials. May attend meetings and record and report on proceedings if necessary.
* Provide support to Salesman and Recruiters, as requested, and handle office issues as required. This also includes daily communication with Corporate Payroll and Finance Departments.
* Prepare and maintain reports, spreadsheets, data bases, and/or other software files and information.
* Organizes and maintains office and client files
* Opens, reviews and distributes incoming mail; also may prepare and ship outgoing mail or documents
* Perform all other position related duties as assigned or requested.

Experience / Skills:

* 1-3+ years’ experience of related work experience
* HS Diploma a must
* Must have a reliable vehicle for transportation
* Strong MS Word, Excel and general internet skills
* Strong attention to detail; excellent data entry and organizational skills
* Strong written and verbal communication skills
* Ability to work independently with minimum supervision

Preferred:

* Experience in a Recruiting / Sales environment within the Administrative Assistant field
* Experience recording and calculating commissions via Excel
* Associate’s / Bachelor’s degree in Human Resources or a related field


Mark A Ludwig
Vice President of Sales
Global American Staffing
Email: mludwig@globalams.us
Direct: (508) 434 - 6180
Toll Free: (800) 510 - 8050 x123
Fax: (508) 923 - 0005
www.globalamericanstaffing.com
 
Job Number: Admin
Job Location: Lakeville, MA
Rate: Open
Per Diem: N/A
Overtime: N/A
Duration: Perm Hire
Start Date: Feb 13 - Mar 13
Input Date: 01/18/2017
Last Updated: 09/14/2017
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Administrative Assistants - San Antonio, TX

Description:
STS AeroStaff Services is currently hiring Administrative Assistants for open positions in San Antonio, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.
Job Duties:
• Provides friendly service to and maintains positive relationships with all internal and external Customers
• Works in a cooperative spirit to ensure the success of our Company
• Performs secretarial and administrative duties for Leadership and staff under minimal supervision
• Answers calls, relays and takes messages, transfers calls, provides assistance to callers, screens calls and places calls for management
• Maintains department personnel files and paperwork
• Organizes and maintains payroll file room and coordination of timely rotation of files to off-site storage facility
• Orders supplies using established Company vendors and ordering methods
• Opens, sorts, screens and responds to incoming mail
• Composes, types and edits correspondence
• Compiles data and prepares special reports; gathers and summarizes data
• Makes arrangements for meetings and luncheons as directed by the department Leadership Team
• Maintains appointment calendars for management
• Arranges travel and accommodations for management and staff
• Establishes meeting times, secures location and contacts attendees
• Establishes and maintains files and other information for reference and control purposes
• Prepares confidential paperwork regarding performance appraisals, promotions and other people-related issues for management
• Maintains invoice and budget files and assists in the compilation of variance reports
• Operates computer equipment utilizing word processing, spreadsheet, data base management and presentation software
• Some data entry may be required
• Operates copy machine, FAX equipment and other standard office equipment
• May perform other job duties as directed by Leadership
• Must be able to meet any physical ability requirements listed on this description
• May perform other job duties as directed by Employee's Leaders
Qualifications:
• High School diploma or equivalency required
• Previous analytical/technical experience preferred
• Must provide friendly service to and maintains positive relationships with all internal and external Customers
• Operation of multi-line telephone with courtesy and sufficient speed
• Ability to operation copy machine, FAX machine and other standard office equipment
• Open, sort and screen incoming mail
• Must master computer software applications such as Outlook, Quickbase, Microsoft Word, Excel, PowerPoint and Access
• Must have sufficient ability to handle and resolve office administration tasks
• Must be able to perform mathematical computations
• Must possess excellent organization skills including establishing and maintaining files for reference and control purposes
• Must work under tight time constraints including meeting unforeseen deadlines to accomplish assignments and projects
• Must be able to effectively communicate verbally, by telephone and face to face
• Must have ability to keyboard with sufficient speed and accuracy to meet the demands of the job
• Must be able to read documents, follow instructions, learn and understand office procedures
• Must compile data and prepare special reports
• Responsible for making arrangements for meetings and luncheons and handle travel arrangements as necessary
• Responsible for the payroll records for the entire Department, including Incentive Passes
• Must have ability or must gain ability to use SWEEP for ordering department supplies
• Must be able to work varying schedules and work weekends as required
• Must be able to work occasional overtime, as necessary
• Must be able to comply with Company attendance standards as described in established guidelines
• Must meet confidentiality expectations as to confidential, proprietary and sensitive Company information
• Must maintain a well-groomed appearance per Company appearance standards as described in established guidelines
• Must be a U.S. citizen or have authorization to work in the United States as defined by the Immigration Reform Act of 1986
Benefits:
STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.
We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.
Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38673
Job Location: San Antonio, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/12/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace CMM Inspectors - Hawthorne, CA

Description:
STS AeroStaff Services is currently hiring Aerospace CMM Inspectors for open positions in Hawthorne, California.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Surface plate work/inspection
• Inspect supplied product according to the applicable drawing and or work order specifications to verify that it conforms to all design requirements
• Perform repetitive inspection following standardized methods
• Perform receiving inspections, first article inspections, and production inspections
• In-Process Inspection: Visual and/or dimensional inspection of precision machined and sheet metal parts
• Interact proactively with other departments to improve products and reduce cost
• Communicate help resolve quality related issues as they relate to the shops production and Document production non-conformances in accordance with prescribed procedures and processes as required
• Support Quality Management System policies and procedure documentation, assess compliance to company and industry standards, initiate and lead continual improvement and Lean Manufacturing initiatives
• Work in a cross functional environment utilizing PC-DMIS programming skills as applied to an Articulating Romer ARM and CMMs
• Create, maintain and verify CMM programs used for the measurements of manufactured and supplied parts
• Performs documentation review and verification of certifications, specifications, and conformance to design and specification requirements

Basic Qualifications:

• Must be a U.S. Citizen
• High school diploma or GED is required
• Must be knowledgeable of sheet metal fabrication process
• Experienced with the inspection of sheet metal parts
• Able to read and interpret various mechanical drawings and blueprints
• Ability to utilize hand tools for inspection, i.e. micrometers, calipers, scales, gauges and height gauges
• Clear understanding of document control processes
• Ability to relate and interact with staff at all levels of the organization
• Works independently and is self-directed
• Experience with GD&T is desired
• Able to multi-task between production checks and FAIs
• Minimum of 3 years’ of precision mechanical inspection experience required
• Minimum of 3 years of CMM or ROMER/Faro Arm experience required
• At least 3 years’ of practical experience in a launch vehicle/spacecraft hardware integration environment
• Must be able to read and interpret design drawings and CAD models

Preferred Skills and Experience:

• Aerospace precision inspection experience
• ISO 9001 / AS9100 experience
• CMM experience with PC-DMIS software experience
• NC inspection experience with PC-DMIS NC/ CAPPS NC
• Romer Arm experience with Verisurf/ PCDMIS software
• Solid computer skills in Microsoft Word, Outlook and Excel
• DCC (Direct Computer Control) experience
• Statistical process controls experience a plus
• Ability to detect design and drawing flaws
• Ability to read and interpret engineering drawings and specification using ASME Y14.5
• GD&T and skillful use of metrology tools and gauges
• Example: Thread gauge, profilometer, height gauge, calipers, micrometers, etc.

Additional Requirements:

• Must be able to lift up to 25lbs. unassisted
• Must be able to work either 1st Shift (5:00am-3:30pm) or 2nd shift hours (3:30pm-2:00am) based on staffing needs, and overtime as needed
• Must be able to stand for extended periods – 8 hours min
• Must be able to work all shift hours, able to work overtime and weekend as needed

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38989
Job Location: Hawthorne, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/13/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Design Engineer

Description:
Role:Aerospace Design Engineer

Location:Colorado Springs, CO

Duartion:6 months+

BS or MS Aerospace, Mechanical, or Metallurgical Engineering Degree, Minimum 3.0/4.0 GPA

A minimum of 4 years of engineering experience in designing mechanical products (preferably aerospace).
•Knowledge of FAA/ aerospace requirements
•Strong interpersonal skills and skills facilitating working in a teamwork environment
•3D CAD experience with high end CAD software (preferably Unigraphics NX)
•Strong experience in using Excel based tools for weight or other analysis.
•Experience in working with PLM systems (preferably Teamcenter)
•Experience in developing/ using weight management tools/ systems preferred.
 
Job Number: 51829
Job Location: Colorado Springs, CO
Input Date: 06/13/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Bala
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer

Description:
Perform spacecraft attitude control systems analysis, test, design and/or development. Run detailed spacecraft simulations using in house simulations. Design spacecraft attitude and orbit determination and control loops using MATLAB. Design various Guidance, Navigation and control algorithms using various tools, including MATLAB and C/C++ compilers. Develop subsystem specifications, develop GNC Flight software, test GNC FSW. Develop and test operations scripts. Enhance or extend simulator capabilities. Document results and create presentation materials.

Qualifications: Top Secret/SCI Clearance REQUIRED UP FRONT.
A Bachelors Degree (BA/BS) in Computer Science, Engineering, Math, Physics.
Four years of related experience is required. Experience designing and/or analyzing spacecraft Guidance Navigation & Control subsystems.
Expertise with using MATLAB.
Experience with coding in C or C++.
MS is preferred with 2-3 years spacecraft attitude control design experience.
 
Job Number: 57448364 AG
Job Location: Dulles, VA
Rate: 51/hr DOE
Per Diem: Split
Overtime: Maybe
Duration: 6-12 months
Start Date: ASAP
Input Date: 06/07/2017
Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
Attention: Andy
Address: 5620 INTERNATIONAL PKWY
City, State: NEW HOPE, MN 55428-3047
Phone: 763/577-9000
Fax Phone: 763/577-9010
Website: www.entegee.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Applications Engineer - Level 3

Description:
Applications Engineer - Level 3

Location: Lexington, KY
Pay Rate: DOE ($55/hr - $65/hr)
Duration: 1 year contract
Shift: First, 5/40, exempt
**MUST be eligible to obtain a DoD SECRET CLEARANCE**
**MUST be a U.S. CITIZEN**

Description
-This is an early to mid career position (5 to 10 years experience) for a Product Lifecycle Management (PLM) software administrator.
-The PLM Admin will be responsible for managing the daily operations and milestone events (e.g. upgrades) for the PLM software (Teamcenter) at the Special Operations Forces Support Activity (SOFSA) contract in Lexington, Kentucky.
-She / he will be part of the IT department and will work with the user community (primarily production engineering) to ensure the software meets the needs of the contract.
-This includes, but is not limited to, configuration settings, and workflow / report design and support.
-Gathers information concerning the capabilities of company products;
-Investigates the technical capabilities of company products and competing equipment;
-Stays abreast of developments in hardware and software;
-Analyzes customer problems; assists in designing systems to satisfy customer needs.
-Prepares equipment analysis to instruct sales force and customers in equipment capabilities.
-May prepare and present sales proposals.

Skill/Experience/Education (MANDATORY):
-PLM Experience: (4-5 years required)
-Application Administration (Server Side): (4-5 years required)
-CompTIA Security+ certification (required)

Desired:
-Teamcenter (Engineering or Unified)
-PLM data modeling experience
-Experience working with a Linux interface
-Experience writing custom handlers or extension rules
-Customer service experience working directly with users to answer questions and troubleshoot issues

Applicant Questions:
1) How many years of PLM Administration do you have?
2) What PLM software have you worked with?
 
Job Number: 7480
Job Location: Lexington, KY
Rate: 55-65
Per Diem: Split Possible
Overtime: Possible
Duration: 1 year
Start Date: ASAP
Input Date: 05/31/2017
Last Updated: 10/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Assistant-Network - II

Description:
PDS Tech is seeking a candidate for the Assistant Network II position located in Westlake, TX.  
Assistant Network is responsible for providing support to the network New Build Real Estate Site Acquisition team.
All of the job functions support new build site acquisition team, the specific tasks include receiving invoices for payment for site acquisition services for new build real estate sites, creating purchase orders, maintaining records for new build cell sites, maintaining site list and contact numbers for work groups, and providing updates as required.
May also be responsible for providing the highest possible quality and reliability in both clerical and technical areas, including interfacing with various departments such as: Legal, Environmental, Accounts Payable, Purchasing, IT etc.
Minimum AA degree or equivalent.
Must be highly proficient utilizing Microsoft Windows, Excel, Word, PowerPoint, related Windows-based software and Siterra and/or Site Tracker data bases a plus.
Must be able to work as part of a support staff in a technical office environment.
Must have the ability to support a group of 20 plus.
Knowledge of PeopleSoft (Purchasing System) i.e., creation of purchase orders.
Ability to multitask and prioritize the assignments as and when required.
5 to 7 years of experience.

 
Job Number: 1710066653
Job Location: Roanoke, TX
Duration: 12 months
Input Date: 04/12/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Jan Manalaysay
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021k0cAAA&URLSource=cjhunter

Automation Software Developers

Description:
OOP-object oriented programming, high speed
 
Job Location: Midwest
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: ccastro@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aviation Parts Purchasers - Addison, TX

Description:
STS AeroStaff Services is currently hiring Aviation Parts Purchasers for open positions in Addison, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Source and select suppliers, negotiate pricing, award contracts for purchase of aviation parts
• Ensure all paperwork is completed accurately and efficiently, and all order statuses are updated daily
• Prepare purchase order / sales order packets for Purchasing Manager
• Inspect and correctly identify incoming parts, ensuring correct certification accompanies parts being received
• Ensure proper identification and organization of inventories, keeping inventories at acceptable levels to support fleet
• Ensure materials are properly issued to specific aircraft for work in progress and to shop for component rebuilds
• Approve/Authorize payment of invoices for parts
• Maintain storage areas in a clean and orderly manner; recommending improvements to make areas safer
• Verifies all packing slips against purchase orders and forward to A/P
• Interfaces directly with A/P where price discrepancies exist between the purchase order and invoice
• Reports all major or consistent price discrepancies to the Warehouse Manager
• Assists Warehouse Manager with solicitation of bids, review of pertinent data and negotiations
• Interfaces directly with department managers in relation to procurement to establish needs
• Communicates with all departments in relation to requisitions and orders that are in progress
• Perform other related duties and assignments as required

Skills & Qualifications:

• Minimum 3 years’ of experience in purchasing
• Experience in an aviation purchasing is preferred
• 2+ years’ processing inventory
• 2+ years’ with current software packages such as Microsoft Word and Excel
• Excellent attention to detail, must maintain discretion when working with confidential information, and have the ability to recognize errors and make corrections

Education & Experience:

• A&P License
• 3+ years’ experience in heavy line maintenance of transport category aircraft, preferably DC-9/MD-80 series
• Familiarity with FAA 121/145 regulations

Physical Requirements/Working Conditions:

• Prolonged sitting at personal computer
• Prolonged exposure to outdoor environment: heat, humidity, cold, damp
• Prolonged use of telephone
• Frequent bending, twisting, stooping, pushing and pulling equipment and/or parts
• Prolonged standing and kneeling in awkward positions
• Ability to lift up to 70 pounds overhead
• Flexible, irregular schedule
• Travel as necessary (about 20% of time)

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38904
Job Location: Addison, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Integration Engineer

Description:
Job Description
Design/develop simulation software and test scripts from software requirements to support testing of air monitoring software for space applications. The software will use communication interfaces such as RS-232, RS-422, MIL-STD-1553B, and Ethernet.
Support software verification and validation testing including developing and/or running qualification test procedures

Experience developing software in a Windows environment using Microsoft Visual Studio C/C++ or C# I/O board experience. Experience with a scripting language such a Python or Perl . Experience using MS Office for documentation (Word, Excel, PowerPoint) BS or MS in Computer Science or related discipline. Excellent verbal and written communication skills
 
Job Number: CA7725
Job Location: Pomona, CA
Rate: 53.00
Per Diem: Possible
Overtime: Possible
Duration: 9 months
Input Date: 06/07/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Machinist

Description:
CNC Machinists/Programmers - 5 Axis
Wheeling, IL

Contract to Hire

Must be familiar with Fanuc controls. Seeking Aerospace Industry experience.

MUST be willing and able to work this shift: 6PM-6AM (4 days on, 3 days off, 3 days on, 4 days off)

Our client is looking for operators, machinists and programmers available for basic setup through complete processing of advanced components for CNC turning/CNC milling machines - utilizing metal machining knowledge to set-up and develop machine processes as well as operate a variety of CNC machines to produce high-precision machined parts.


Positions involve:

Accurate record keeping.
Able to read and interpret drawings and work instructions.
Proper inspection of first-run and in-process parts.
Safe operation of CNC machinery.
Ability to set-up and machine components.
Ability to create and edit programs on Mastercam and Unigraphics NX software.
Ability to keep a safe and clean working environment.

Requirements:

2.5-5 years experience in programming, editing, set-ups and operating of CNC machines for precision parts.
Read and understand GCode/measuring equipment.
Interpret drawings with complex GD&T symbols.
Manual agility.
Experience with:
CNC mills - 3 to 5 axis.
CNC lathes with live tooling.
Fanuc and/or Heidenhain controls.
For Programmers:
Mastercam programming and/or Unigraphics NX software experience.
Experience with limited dimension drawings and solid models
 
Job Number: 51271
Job Location: Wheeling, IL
Duration: LT
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cert Project Specialist I

Description:
Unique Skills:

Previous experience supporting FAA/Gulfstream ODA certification projects. (For example STC/MRA/TC projects)

Position Purpose:

Under general supervision, performs a variety of engineering tasks associated with ODA (Organization Delegation Authorization), FAA (Federal Aviation Administration), EASA (European Aviation Safety Agency) and/or other FCAA (Foreign Civil Aviation Authorities) certification projects. Primary responsibilities include the gathering, organizing, generating, reviewing and processing of engineering documentation associated with MRA (Major Repairs and Alterations), STC (Supplemental Type Certificate), Type Certificate (TC) and/or other regulatory approvals projects.

Principal Duties and Responsibilities:

Essential Functions: 1. Reviews STC/TC/MRA data packages prior to submission to the FAA for completeness and adherence to the established requirements. Makes recommendations to ensure STC/TC/MRA documentation is prepared in accordance with approved procedures. 2. Gathers, organizes, and processes engineering documentation related to STC/TC/MRA projects. 3. Exercises creativity and initiative in processing, handling, and distributing engineering documentation to both internal and external organizations. 4. Participates on work teams to achieve department goals, complete milestones and improve processes. 5. Tracks STC/TC/MRA projects to ensure completion within the required timeframe. 6. Assists FAA Designees in STC/TC/MRA project development, as described by Gulfstream ODA Operations Manual procedures. 7. Develops and broadens skills for competency enhancement and career progression.

Additional Functions: 1. Performs other duties as assigned. 2. Minimum travel required.

Other Requirements: 1. Good working knowledge of MS Office software. 2. Must be familiar with Federal Aviation Administration (FAA) certification processes. 3. Must be familiar with Federal Aviation Regulations (14 CFR Part 21, 23, 25, 43, 91, 135 and 183) and associated guidance material. 4. Must possess excellent attention to detail and display the ability to effectively adjust to changing engineering practices and procedures. 5. Must have excellent organizational and planning skills.
 
Job Number: 17-680-100081
Job Location: Southeast
Rate: $61.00 to $68.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/13/2017
Firm Name: AGENTE TECHNICAL
Attention: Alrxa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Aviation Inspectors - Elk Grove Village, IL

Description:
STS AeroStaff Services is currently hiring Chief Aviation Inspectors for open positions in Elk Grove Village, Illinois.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Purpose:

To ensure the repair stations operations are conducted in accordance with the pertinent FAA Regulations, client’s Quality Manual/Procedures, Customer Air Carrier Requirements and is designated with final airworthiness determination.

Job Duties:

• The Chief Inspector will have the final airworthiness authority for the release, as airworthy, of the units the repair station is rated to repair and maintain
• Responsible for ensuring all articles delivered to and maintained by the repair station are properly recorded and staged from receipt to delivery in their airworthy/serviceable condition
• Managing and delegating to the repair stations inspection staff ensuring the quality and production needs are maintained
• Perform, and have oversight of inspection personnel/activity, including Preliminary, Hidden Damage, In-Progress and Final inspections/RTS of aircraft articles processed by the Repair Station and assuring proper recording of results
• Ensure compliance with pertinent FAA regulations, manufacturer’s technical data/approved supplements, RSM/QCM and customer requirements
• Report all quality related issues to the QA Manager as soon as the Facility Manager is advised and ensure corrective actions are implemented
• Confirm that all equipment being maintained by the repair station is on the Capabilities List, the proper data is available and in use, the staff is properly trained and all records of work/release are complete/accurate
• Perform duties delegated by Quality Assurance Manager
• Directly responsible for the compliance with the FAA Approved training program manual; including indoctrination, initial, recurrent, ongoing, semi-annual, and specialized training
• Ensure any applicable Airworthiness Directive are posted and are being used and verify compliance with all other supplements, approvals, requirements
• Submit reports of defect or un-airworthy condition to the “Service Difficulty Reports”
• Assume all duties and responsibilities detailed in the RSQCM to include; calibration program, shelf life program, internal auditing, BER/scrap, work turn over, suspected unapproved parts, salvage parts program and incoming goods
• Performing semi-annual internal audit of the repair station and any approved contractors
• Coordinate with station manager inspection requirements
• Ensure and assist in all areas of the Safety Program and Zero Harm Program to ensure that they are fully enforced and by all client employees
• Provide feedback/suggestion to improve customer satisfaction
• Communicate with customers and regulatory agencies during audits or visits
• Ensure system security of our FAA approved electronic recordkeeping system regarding their area/s of responsibility
• Maintain safe and clean work environment
• Overseeing the quality of products in accordance with monthly budgeted production goals
• Maintaining quality standard in accordance with the regulations, customer requirements and internal procedure
• Establishing a quality and compliance system which will result in no major audit finding;
• Equipment rejection rates shall be at 98% or higher
• Maintaining positive MTTR
• Contributing to positive MOP by controlling wastes
• Enforcing the client Zero Harm Culture and goals

Qualifications:

• 2+ years’ experience as a lead inspector or manager in related aviation field
• 5 years’ aviation related industry experience
• Confident personality with the ability to interface/communicate with the authorities and customers
• Experience in performing Audits
• Strong knowledge of FAA regulations and Part 145 requirements
• Competent in reading and interpreting manuals, drawings, policies
• Good communication and punctuation skills
• Computer literacy and familiar with Microsoft office
• Ability to learn new software programs and systems
• Appropriately certificated under Part 65 (A&P or FAA Repairman)
• Ability to work in a high activity/fast paced environment while managing associated stress
• Possesses excellent organizational skills and ability to work independently
• Organize responsibilities of the inspection staff and delegate duties to properly qualified inspection personnel
• Effectively execute training in accordance with the Approved Training Program and internal requirements
• Ability to make quality decisions and effectively solve problems
• Strong verbal and written communication skills, including the ability to facilitate meetings and effectively lead groups
• Ability to build and maintain effective working relationships with all levels of management and staff
• Ability to lift, pull, and push in excess of 65 lbs
• Must be able to read, write and understand the English language
• Part 65 A&P or Repairman Certificate

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38651
Job Location: Elk Grove Village, IL
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Engine/APU, ECS, Fuel Systems Engineer

Description:
Unique Skills:

Required Experience in the following: • System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing • Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings • Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following: • Engine Systems (FADEC) • Environmental Control Systems • APU systems • Fuel systems (Distribution and Indication) Desired Experience in the following: • Working Knowledge ARP4754 and CFR 25 • Exposure to Part 33 certification • Project Management Skills/Experience: • Configuration change management
 
Job Number: 98102
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Contract - Simulation & Software Engineering Contractor

Description:
Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems 2. Aerospace background with avionics lab testing experience 3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation 4. Experience with high level programming or scripting language such as C/C++, Python 5. Knowledge of data protocols used in aerospace 6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI) 7. Flight and/or aircraft system lab HIL simulation experience 8. Ability to work independently and self-govern priorities in accordance with lab customer needs ob Description Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 92762
Job Location: Savannah, GA
Per Diem: Possible
Overtime: Possible
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: INTERGEN GROUP
Attention: kim Mason
Address: 5051 PEACHTREE PKWY STE 200
City, State: PEACHTREE CORNERS, GA 30092
Phone: 678/318-1816
Fax Phone: 678/493-1467
Website: www.intergengroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Controls Engineer

Description:
Duties involve contributing to machine concepts, design of control software, integration of software with electrical and mechanical systems, process development and machine installation at customer sites worldwide. Programming and integration assignments involve leading-edge technologies and processes utilizing PLC’s, PC’s, robotics, motion controllers, vision systems, laser and other controllers.

Responsibilities

Design, program and debug control systems for assembly and test equipment

Modify/retrofit existing systems

Communicate and interact with customers and suppliers

Manage projects within cost and time constraints

Communicate to Lead CE

Requirements

Minimum 4 years’ experience with machine controls

Strong knowledge of PLC’s (AB a must, prefer a combination of AB & Siemens)

Knowledge of Robotics and motion control a plus

Experience with HMI’s

Experience with AutoCAD preferred
 
Job Location: Chicago, IL
Rate: Open
Per Diem: Possible
Overtime: Yes
Duration: 3-12 mos.
Start Date: ASAP
Input Date: 06/12/2017
Firm Name: STERLING ENGINEERING
Attention: Gina McDermott
Address: 2 WESTBROOK CORP CTR STE 300
City, State: WESTCHESTER, IL 60154-5721
Phone: 630/993-3433
800 Phone: 866/478-3754
Fax Phone: 630/516-1192
Website: www.sterling-engineering.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Customer Relations Specialist

Description:
Customer Relations Specialist

Location: Ridley Park, PA
Duration: 3 Months

Description:
The Global Sales & Marketing Customer Engagement (CE) function is responsible for delivering unparalleled customer experiences that strengthen relationships, enhance business growth and advance the global brand of The client Company.
As a member of the BDS Customer Engagement team, you will provide leadership and support in strategic event planning and marketing support to various BDS programs, both domestic and international. The position is focused on providing support to the client Military Aircraft (BMA) and Vertical Lift business units of BDS as well as to research-and-development programs and site, community, local government, and supplier activities.

Candidate will report to the Manager-Customer Engagement for client Defense, Space, and Security located in St. Louis, MO. The role requires the planning, coordination and execution of complex customer visits, special events, conferences, product demonstrations, site tours, and sponsored functions for U.S. Department of Defense and international customers, as well as senior client and industry partner executives.

Candidate will be required to lead or assist with customer engagements, manage vendors, prepare and deliver executive event briefs, and assess event effectiveness at the local client site and other venues. The job entails the use of event planning and project management skills, marketing tactics, clear understanding of customer requirements, a substantial working knowledge of U.S. and foreign government regulations, familiarity with international cultures and customs, and strict adherence to company guidelines, policies, and procedures. You will continuously collect, integrate and disseminate information to all stakeholders to ensure execution to the plan. In addition, you will utilize event management tools and data to capture and closeout event reports.

Demonstrated leadership, event project management, strategy, marketing, communications and teambuilding skills are key to this role. Other essential skills and competencies are business knowledge, flexibility, attention to detail, decisiveness, forward thinking and a positive approach to change and innovation. The role requires the ability to manage multiple projects simultaneously with minimal supervision, meet deadlines and event budget targets, create and maintain effective working relationships and customer partnerships.

Education / Experience:
Bachelor's and typically 6 or more years' related work experience, a Master's degree and typically 4 or more years' related work experience or an equivalent combination of education and experience.

Skill Code:
K03-Customer Relations Mgt
Category Name Required

Areas of Expertise Project Management Yes


Soft Skills Oral and Written Communication Skills Yes


Software Skills MS Office Yes
 
Job Number: 17-10132
Job Location: Ridley Park, PA
Per Diem: possible
Overtime: possible
Duration: 3-6 mos
Start Date: 6/23/17
Input Date: 06/15/2017
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Electrical Engineer

Description:

PDS Tech, Inc. is seeking an Electrical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Electrical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  electrical and/or electronic components and major assemblies; discrete and custom devices; complex cables; RF/radar/antenna devices and components; test equipment hardware and/or software; test & controls; purchased and COTS products; control account management.

  • Performs project planning and manages project resources, including multiple individuals and disciplines, to achieve quality, delivery, and cost objectives.
  • Conducts research and development experiments to resolve complex engineering and quality problems involving highly technical, scientific methods.
  • Writes technical reports on results and conclusions drawn from experiments conducted and incorporates findings in formal specifications.
  • Translates design agency concepts into production items by coordinating the activities of engineering, quality, manufacturing, and related organizations.
  • Estimates set-up times, flow times, costs of production and acceptance equipment, and compiles cost estimates and delivery quotations, monitors performance, and prepares reports, statistics, and recommendations for management review.
  • Contributes to business growth through the pursuit of new technology; participates in establishing operating procedures on new products and components.
  • Defines and recommends new designs, design changes, and alternate designs of instruments, and test equipment, and orders tooling, gaging, and equipment necessary to assure product quality.
  • Plans and performs engineering testing and development programs and uses advanced statistical and scientific methods to address and resolve critical engineering and production problems to assure product manufacturability.
  • Originates, refines, and releases complex manufacturing or inspection work directions.
  • Determines acceptability of processes and materials in conjunction with customers, design agency, quality, and other affected organizations.
  • Interacts with customers, design agency and/or supplier counterparts to resolve moderate to complex design, development, production and acceptance issues.
  • Based on research, applies, develops and recommends innovative methodologies and technologies which are equal to the industry's state of the art to resolve processing and design problems.
  • Provides technical consultation to management and others, and leads technical project teams. 
  • Responsible for work that may involve longer range and/or complex business objectives in field of expertise.
  • Evaluates and implements innovations and technological advances that improve quality, reduce flowtime, improve productivity, and enhance operational surety.
  • Performs highly complex calibration and measurement services, recommends changes in calibration procedures to improve services, and solves special measurement problems.
  • May perform other duties as required.
  • Conducts activities in a safe and healthy manner and works in accordance with established HS&E requirements to ensure the protection of employees, the public, and the environment.  Takes actions necessary to "stop" work when an unsafe condition or action is identified.  Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Electrical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum two (2) years directly applied engineering experience.


Additional Qualifications: 

  • Five (5) or more years directly applied engineering experience in a technology and/or manufacturing environment preferred.
  • Advanced degree in an engineering, physics or business discipline is advantageous.
  • Six Sigma certification (black belt; green belt) preferred.
  • Experience/history reflective of executing continuous improvement toward products and/or processes.
  • Technical project management experience.
  • Experience/familiarity with enterprise resource planning and/or earned value management systems.
  • Experience presenting technical material to varied levels of audiences.
  • Willingness to travel up to 25% of time.

 
Job Number: 1710068676
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/25/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002Jr0WAAS&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3

Description:
Electrical Engineer - Level 3

Duration: 1 year contract
Pay Rate: DOE ($50/hr - $55/hr)
Location: Grand Prairie, TX
Shift: First, 9/80
*The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years)*

Job Description:
-Analog engineer is required to design a power voltage card to convert voltages between mature subsystems.
-The power voltage card will need to fit within an existing space.
-This effort will require part selection, design review, and design release.
-The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-The engineer must be proficient in Cadence; have good communication skills.

Mandatory Skills:
-Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years).
-Bachelors degree in Electrical Engineering with five or more years of experience.
-Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems.
-Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting.
-Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes.
-Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills.
-Proficiency with electronic analyzers and other trouble shooting tools is required.
-Ability to develop system and subsystem performance requirements.
-Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

REQUIRED Skill Matrix:
-Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. : (9-10 years)
 
Job Number: 7065
Job Location: Grand Prairie, TX
Rate: 50.00-55.00
Per Diem: Possible
Overtime: Yes
Duration: 1 year
Start Date: ASAP
Input Date: 02/14/2017
Last Updated: 12/26/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Level 3 with active secret TX

Description:
158440/1251
Electrical Engineer - Level 3
Grand Prairie TX
60/hr
Active Secret
12 months

Description
Analog engineer is required to design a power voltage card to convert voltages between mature subsystems. The power voltage card will need to fit within an existing space. This effort will require part selection, design review, and design release. The engineer must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). The engineer must be proficient in Cadence; have good communication skills.
Skill/Experience/Education
Mandatory:

Must have an active SECRET security clearance and it is preferred that the employee's investigation is in scope (investigation performed within the past 5 years). Bachelors degree in Electrical Engineering with five or more years of experience. Must be willing to accept a wide variety of work assignments supporting the total end-to-end process of capturing, designing, developing, testing, manufacturing, and life-cycle support of electronic systems. Must possess strong general electrical engineering knowledge and be familiar with circuit design and components to include electronics testing and troubleshooting. Experience in electronic system and subsystem design and test, systems analysis, software-driven operations and test schemes. Strong electronic systems integration tasking, estimating, testing and excellent trouble shooting skills. Proficiency with electronic analyzers and other trouble shooting tools is required. Ability to develop system and subsystem performance requirements. Ability to use test equipment to support acceptance testing, manufacturing production and in-process testing, data processing and analysis.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Circuit Design Power regulation circuit design experience. Schematic entry. PSPICE analysis. Derating analysis. etc. 9-10 Years Yes
 
Job Number: JE-1251
Job Location: Grand Prairie, TX
Rate: 60/hr max
Duration: 12 month contract
Input Date: 07/20/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer with active secret CA

Description:
Job Title: Electrical Engineer
Job Number: 159158/0498
Location: Palmdale, CA
Compensation: 65-75/hr
Assignment Length: 12 month contract
Security Clearance Secret

Description:


Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, products, and systems for commercial, industrial, and domestic purposes. The applicant will be focused on the electrical wiring and harness assembly diagram design and development for an ADP program. Duties include creating electrical architectures/schematics and creating electrical harness drawings. Also includes resolving wiring/integration related issues between the various avionics/electrical systems, validating/interpreting/troubleshooting/resolving any wiring related issues, performing technical checks to ensure wiring document correctness, providing engineering sign-off on all new/revised manufacturing wiring documents. .
Skill/Experience/Education
Mandatory:

Experience creating electrical architectures/schematics and electrical harness design. Experience using electrical harness design tools such as Mentor Graphics Capital Harness or HarnesSyS.
Secret Clearance.
Desired:

Experience performing electrical load analysis and electrical power system integration
Experience with CATIA V5 Experience generating System Check Procedures and providing support Experience incorporating subsystem hardware into a Software Integration Lab (SIL) and troubleshooting integration issues.

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Wiring Harness Design Design aircraft electrical wiring harnesses, preferably using Mentor Graphics Capital Harness. 6-8 Years Yes
Electrical architecture/schematic design Evaluate system requirements to generate electrical architectures and schematics. 6-8 Years Yes
Electrical Power System Design Evaluate electrical load requirements and design electrical power and distribution systems. 6-8 Years No
 
Job Number: DW-0498
Job Location: Palmdale, CA
Rate: 65-75/hr DOE
Duration: 12 month contract
Input Date: 06/05/2017
Last Updated: 06/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers (Level 3) - Atlanta, GA

Description:
STS AeroStaff Services is currently hiring Electrical Engineers (Level 3) for open positions in Atlanta, Georgia.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Evaluate reliability metrics and develop plans to improve
• Understand LRU failures and participate in supplier RCA’s and countermeasure implementation
• Review supplier Service Bulletins and issue client paperwork for fleet implementation; including Software and Hardware changes
• Review supplier Manual changes and issue client paperwork for incorporation into client Tech Pubs
• Support IFE/IFC Reliability Team (206) and participate in Daily Ops meeting

Basic Qualifications:

• 8+ years’ related experience
• Bachelor’s Degree in Electrical Engineering
• Previous IFE or IFC experience
• Advanced troubleshooting skills (i.e. SixSigma, FMEA, etc.)

Preferred Skills/Certifications:

• Software Safety (i.e. DO-178B)
• Operational Experience

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38901
Job Location: Atlanta, GA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Power System Engineer

Description:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS.
• Experience in software V&V.

Required Experience in the following:
• Electrical Power Generation, control and indicating
• Secondary Power Distribution, control and indicating
• Solid State Electrical Power.

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Project Management

Skills/Experience:
• Configuration change management
 
Job Number: 24-174
Job Location: Savannah, GA
Rate: $58 - $63
Per Diem: Yes
Overtime: Yes
Duration: 1 Year plus
Start Date: ASAP
Input Date: 09/25/2017
Last Updated: 02/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Level 3 with active secret TX

Description:
Embedded S/W Engineer - Level 3
Description
Lockheed Martin Missiles & Fire Control is seeking a qualified Software Engineer to work in the Grand Prairie, TX office. As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus.
Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle. Active SECRET Clearance is required. Will need clearance status on resume. Needs clearance from the start.
Skill/Experience/Education
Mandatory:

The candidate should be a self-starter and possess the following skills:
• Secret Clearance Required
• BS in Computer Science, Software Engineering, or Related Field
• C/C++
• Razor (CM Control)
• ADA
• Linux (Red Hat)
• Domain Knowledge of Air and Missile Defense
• Seeker Programming and/or Integration
• Seeker Programming and/or Integration
Hardware-in-the-Loop (HWIL) Unit Under Test (UUT)

Desired:

Desired Skills:
• Razor (CM Control)

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
Secret Clearance Required 4-5 Years Yes
BS in Computer Science, Software Engineering, or Related Field 4-5 Years Yes
C/C++ 4-5 Years Yes
Razor (CM Control) 0-3 Years No
ADA 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years Yes
Seeker Programming and/or Integration 4-5 Years Yes
Hardware-in-the-Loop (HWIL) - Unit Under Test Experience 4-5 Years Yes

Special Needs
There is No Special Needs For this Requirement
 
Job Number: JE-1270
Job Location: Grand Prairie, TX
Rate: 65/hr max
Duration: 12 month contract
Input Date: 06/28/2017
Last Updated: 08/15/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Developer - RM

Description:
Embedded Software Developer - 15+ month contract opportunity!

Description:

Embedded Software developer for Flight Management Systems. Familiarity with Ada 95 computer programming language, VxWorks Operating System are a plus.
Candidate must demonstrate ability to develop source code, work in a team environment and be familiar with working within the guidelines of software development lifecycle and DO-178B or DO-178C standards/guidelines.
The work encompasses obtaining requirements, implementing software changes and documentation changes to an existing baseline, software debug and checkout in a lab environment using DataSims, WireShark and other software development and test tools.
Additional support to the independent test team may also be required.
Location: Stratford, CT
 
Job Number: 356464
Job Location: Stratford, CT
Rate: $49hr
Per Diem: yes
Overtime: Yes
Duration: 15 months
Start Date: asap
Input Date: 06/16/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Mardinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer

Description:
Active Secret Clearance.

Real time embedded Software Engineer with experience in Aviation, GPS or Missile Systems
 
Job Location: FL
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/09/2017
Firm Name: PANTHER GROUP
Attention: Bill
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-C/C++ (4-5 Years experience)
-COTS SBC (0-3 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-VxWorks (4-5 Years experience)
-Git (4-5 Years experience)
-J1939 or CANBus experience (4-5 Years experience)
-Eclipse (4-5 Years experience)
-Embedded SW Engineering (4-5 Years experience)
-Ground Vehicles and Autonomy Experience (4-5 Years experience)

Desired:
-Driver Development (0-3 Years experience)
-Python (0-3 Years experience)
-ROS (0-3 Years experience)
-CODESYS (0-3 Years experience)
 
Job Number: 7297
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 07/19/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-US DOD Secret Clearance Required (4-5 years experience)
-BS in Computer Engineering, Computer Science, Software Engineering, or Related Field
-C/C++ (4-5 years experience)
-Linux (Red Hat) (4-5 years experience)
-Embedded SW Engineering (4-5 years experience)

Desired:
-Razor (CM Control)
-Domain Knowledge of Air and Missile Defense
-Seeker Programming and/or Integration
-Hardware-in-the-Loop (HWIL) - Unit Under Test Experience (UUT)
 
Job Number: 7295
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 2

Description:
Embedded Software Engineer - Level 2

Location: Grand Prairie, TX
Pay Rate: DOE ($65/hr - $80.73/hr)
Duration: 1 year contract
Shift: First, 9/80
Travel: Yes, to customer locations as required
** MUST have an ACTIVE SECRET CLEARANCE **

Description
-Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.
-Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature.
-Interfaces with customers, suppliers, application users, and other technical and support personnel.
-Must have Secret clearance.

Skill/Experience/Education (Mandatory):
-DOD Secret Clearance Required (Must have active/transferable Secret Clearance) (4-5 Years experience)
-BS in Computer/Software Engineering, Computer Science, or Related Field (4-5 Years experience)
-Modern C/C++ (4-5 Years experience)
-Agile Product Development (4-5 Years experience)
-Linux (Red Hat) (4-5 Years experience)
-Boost Libraries (4-5 Years experience)
-Web Services (SOAP/REST) (4-5 Years experience)
-Jenkins (4-5 Years experience)
-Continuous Integration (4-5 Years experience)
-Qt Application Framework (0-3 Years experience)

Desired:
-Domain Knowledge of Air and Missile Defense (0-3 years experience)
 
Job Number: 7298
Job Location: Grand Prairie, TX
Rate: 65.00-80.73
Per Diem: Split Possible
Overtime: No
Duration: 1 year
Start Date: ASAP
Input Date: 04/11/2017
Last Updated: 09/07/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer - Level 3

Description:
Embedded Software Engineer - Level 3

Location: Grand Prairie, TX
Pay Rate: $70/hr - $80/hr (DOE)
Duration: 6+ Month Contract
Shift: First, 9/80
*Active SECRET Clearance is required*

Description
As a Patriot Missile (PAC-3) Hardware In The Loop (HWIL) Software Engineer, the ideal candidate will have experience with real time systems, experience with real time embedded operating systems and software, Unit Under Test (UUT) programming & integration, open architecture software development, past integration of disparate systems, and Missile Seeker integration experience. Understanding of hardware interfaces and familiarity with missile subsystems is a plus. Candidates must be able to apply the appropriate standards, processes, procedures, and tools throughout the development life cycle.

Skill/Experience/Education
Mandatory: (must meet all requirements)
The candidate should be a self-starter and possess all of the following skills:
• Secret Clearance Required: 4+ years of experience
• BS in Computer Science, Software Engineering, or Related Field: 4+ years of experience
• C/C++: 4+ years of experience
• ADA: 4+ years of experience
• Linux (Red Hat): 4+ years of experience
• Domain Knowledge of Air and Missile Defense: 4+ years of experience
• Seeker Programming and/or Integration: 4+ years of experience
• Hardware-in-the-Loop (HWIL) – Unit Under Test (UUT) Experience: 4+ years of experience

Desired:
• Razor (CM Control): 0-3 years of experience
 
Job Number: 7137
Job Location: Grand Prairie, TX
Rate: 70-80
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 03/02/2017
Last Updated: 10/12/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded Software Engineer Level 2 with active secret TX

Description:
Lockheed Martin MFC 1368
Recruiter to Contact:
Job Title: Embedded Software Engineer Level 2
Job Number: 159149/1368
Location: Grand Prairie, TX
Compensation: 80/hr
Assignment Length: 12 month contract
Security Clearance Active Secret
Exempt

Description:


Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements.

Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and products such as laboratory simulation systems, airplane flight control and display systems, avionics, mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. Interfaces with customers, suppliers, application users, and other technical and support personnel.

Must have active / transferable Secret Clearance prior to submittal and shown on resume.

Skill/Experience/Education
Mandatory:

US DOD Secret Clearance Required, BS in Computer Engineering, Computer Science, Software Engineering, or Related Field, Modern C/C++, Agile Product Development, Linux (Red Hat), Boost Libraries, Web Services (SOAP/REST),Jenkins , Continuous Integration, Qt Application Framework

Desired:

Domain Knowledge of Air and Missile Defense


Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
US DOD Secret Clearance Required 4-5 Years Yes
BS in Computer Engineering, Computer Science, Software Engineering, or Related Field 4-5 Years Yes
Modern C/C++ 4-5 Years Yes
Agile Product Development 4-5 Years Yes
Linux (Red Hat) 4-5 Years Yes
Domain Knowledge of Air and Missile Defense 4-5 Years No
Boost Libraries 4-5 Years Yes
Web Services (SOAP/REST) 4-5 Years Yes
Jenkins 4-5 Years Yes
Continuous Integration 4-5 Years Yes
Qt Application Framework 0-3 Years Yes
 
Job Number: DW-0368
Job Location: Grand Prairie, TX
Rate: 80/hr max
Duration: 12 month contract
Input Date: 06/20/2017
Last Updated: 06/23/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engine-APU, ECS, Fuel Systems Engineer

Description:
UNIQUE SKILLS
Required Experience in the following: • System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing • Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings • Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following: • Engine Systems (FADEC) • Environmental Control Systems • APU systems • Fuel systems (Distribution and Indication) Desired Experience in the following: • Working Knowledge ARP4754 and CFR 25 • Exposure to Part 33 certification • Project Management Skills/Experience: • Configuration change management
 
Job Number: 17-739-98102
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 07/13/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Engine/APU, ECS, Fuel Systems Engineer

Description:
Engine/APU, ECS, Fuel Systems Engineer

Location: Savannah, GA
Pay Rate: $58/hr - $63/hr
Duration: Long Term Contract
Shift: First

Unique Skills:
Required Experience in the following:
• System Certification Requirements: Cert Plan, Flight Test Plan, Flight Test Report, Qual Test Report, Lab test report, Testing requirements/Flight Clearance and or SOF Requirements, development testing
• Hardware Qualification: Plans, procedures, Reports, conformity, ATP & Outline Drawings
• Software Certification: Experience reviewing PSAC, CIA, SAS. Experience in software V&V Required Experience in the following:
• Engine Systems (FADEC)
• Environmental Control Systems
• APU systems
• Fuel systems (Distribution and Indication)

Desired Experience in the following:
• Working Knowledge ARP4754 and CFR 25
• Exposure to Part 33 certification
• Project Management Skills/Experience:
• Configuration change management
 
Job Number: 7519
Job Location: Savannah, GA
Rate: $58-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 06/11/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Email: rex@inconen.com
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Data Modeler) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.

Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma principles

· Knowledge and understanding of business requirement analysis and design including: documentation of data and system architectures

· Ability to synthesize complex analytical findings into executive level communications

· Knowledge and understanding of data governance challenges and approaches: metadata, data quality, and data stewardship

· Ability to articulate a complex problem, design, or build strategy

· Familiar with The Open Group Architecture Framework and the Process Classification Framework

· Experience with SAP HANA Enterprise in Information Modeling, Database design, Data Provisioning, SAP HANA SQLScript, HANA Live and PAL

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Excellent verbal, written, and interpersonal communication skills

· 5+ years’ experience in data design, data architecture and data modeling (both transactional and analytic), Relational or Dimensional data design and modeling, DDL development and database design

Experience with data modeling tools
FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-500225KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Enterprise Data Architect) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.
Requirements:

Duration: Hiring Manager is wanting to hire direct. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma principles

· Knowledge and understanding of business requirement analysis and design including: documentation of data and system architectures

· Ability to synthesize complex analytical findings into executive level communications

· Knowledge and understanding of data governance challenges and approaches: metadata, data quality, and data stewardship

· Ability to articulate a complex problem, design, or build strategy

· Familiar with The Open Group Architecture Framework and the Process Classification Framework

· Experience with SAP HANA Enterprise in Information Modeling, Database design, Data Provisioning, SAP HANA SQLScript, HANA Live and PAL



Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Experience with Power Designer Data Modeling tool

· 5-10 years of overall Enterprise Data Architecture experience

Excellent verbal, written, and interpersonal communication skills

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501562KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (MES Solution Architect) Level 5 (KS)

Description:
esigns, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.
Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st

Little to no OT

No traveling involved

No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Excellent presentation and facilitation skills

· Able to work independently and efficiently to meet deadlines

· Able to multi-task multiple priorities in a fast-paced environment

· Self motivated, detail-oriented and excellent organizational and time management skills

· Team player with a ‘can-do’ positive attitude

· Able to coordinate deployments at multiple work sites – including international

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· Experience with Apriso MES/MOM technology in the solution architecture space

· 5-10 years of overall MES experience, out of which minimum 4 years should be on Apriso Flexnet

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

· Understanding of Lean, Six Sigma, and supply chain principles

Familiar with SQL data architectures

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501558KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 3 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Enterprise Architect (Mobile Solution Architect) Level 5 (KS)

Description:
Designs, defines and engineers system architecture for new or existing complex computer systems within a defined business process. Determines and defines systems specifications, input/output processes, context, interface, integration, and working parameters for hardware/software compatibility and maintenance of system security. Coordinates design of subsystems and their integration into the total system. Uses knowledge of systems engineering, software improvement frameworks, network architecture, system performance analysis, and information system security to identify, analyze, and resolve program deficiencies. Develops and recommends corrective actions, as well as identifies risks and gaps associated with current system constraints. May provide technical guidance for database administrators and software developers.

Requirements:
Duration: Hiring Manager is wanting to hire direct. Candidates must know this position could end earlier than 90 days if Client finds direct hires. Hiring Manger would be interested in contract to direct placement.

Shift: 1st
Little to no OT
No traveling involved
No Per Diem

Must have a Bachelor's degree or better.

Desired Skills:

· Excellent presentation and facilitation skills

· Able to work independently and efficiently to meet deadlines

· Able to multi-task multiple priorities in a fast-paced environment

· Self motivated, detail-oriented and excellent organizational and time management skills

· Team player with a ‘can-do’ positive attitude

· Able to coordinate deployments at multiple work sites – including international

· Strong knowledge of enterprise IT architectures, web services, and web protocols

· Ability to create robust and scalable high volume mobile applications, developing prototypes quickly.

· Citrix XenApp, XenDeskop, and XenMobile for application delivery, virtualization, and containerization

· Citrix Netscaler or comparable load balancing and micro-VPN infrastructure

· Familiarity with industry security requirements such as FIPS, NIST, and EAR/ITAR

· Familiarity with mobile communication apps and methods, including Exchange, Outlook, Skype for Business

· Popular mobile platforms, including iOS, Android, ChromeOS

Qualifications:

· Bachelor or Master Degree: Engineering, Computer Science or other technical discipline

· 5-10 years of overall mobile architecture experience

· Knowledge of IT architecture of multi-sites and enterprise-wide IT solutions

Understanding of Lean, Six Sigma, and supply chain principles
FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-501560KS
Job Location: Wichita, KS
Rate: $BOE/HR
Per Diem: No
Overtime: No much, if any
Duration: 6 months
Start Date: 07/07/2017
Input Date: 06/28/2017
Last Updated: 08/02/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Our client is an aerospace flight test, engineering and certification organization that provides development services to aircraft modifiers and OEM’s. Located in Seattle, they are a small but rapidly growing company in Seattle, WA. Their core team is comprised of very talented and experienced aerospace engineers, technicians, mechanics, and specialist consultants.

We are seeking full-time and contract Flight Test Engineers to join us in Moses Lake, WA. The ideal candidate will possess experimental flight test operational experience in either STC or Type Cert Programs. The individual in this position will be involved in a range of airplane flight test operations.

Essential Functions:
Coordinate test and certification requirements.
Author flight test and ground test plans including test hazard analysis.
Author instrumentation specifications, wire diagrams, FTEO packages, and calibration documentation.
Support instrumentation installation as required.
Support ground operations, including weight and balance activities, fuel management, pre-flight and post-flight tasks and briefings.
Support flight and ground test conduct and data collection.
Analyze test data and evaluate compliance with regulations.
Prepare certification test reports.
Domestic and occasional international travel is required.
Desired Qualifications:

5+ years relevant work experience related to experimental flight test operations. Experience in all of the above activities is not critical.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Ability to think critically, identify and synthesize important information necessary to inform client deliverables.
Strong ability to analyze results, develop defensible conclusions and recommendations, and communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
A team player with the ability to thrive in a dynamic work environment and work effectively with others across disciplines, functions, and organizations.
Demonstrates personal accountability, initiative and versatility on a consistent basis with minimal guidance.
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related Science.
 
Job Location: Moses Lake, WA
Per Diem: possible
Overtime: Yes
Duration: LT
Start Date: asap
Input Date: 11/30/2017
Last Updated: 12/07/2017
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineer

Description:
Flight Test Instrumentation Engineer

Location: Savannah, GA
Pay Rate: $70/hr - $77/hr
Duration: Long Term Contract
Shift: First
Travel: Yes, approximately 20%

Unique Skills:
-Experience with RF Telemetry systems supporting Flight Test activities.
-Full working knowledge of IADS, TTC DAS, and network equipment configuration and installations.

Education and Experience Requirements:
Bachelor's Degree in related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Master's Degree preferred. 5 years of progressively responsible HR experience.

Position Purpose:
-The Instructional Design Consultant is responsible for leading the creation and maintenance of all formal and informal training solutions across the enterprise.
-Develops, enhances and updates the curriculum for all Company training in order to achieve enterprise wide training solutions.
-Responsibilities include planning, coordinating and developing strategic training initiatives for the enterprise.

Principle Duties and Responsibilities/Essential Functions:
1. Operates as an organizational leader and internal consultant to management in the identification, development, and implementation of training solutions.
2. Demonstrates and utilizes effective needs analysis, project management, course development, and evaluation skills in all areas of the business.
3. Evaluates business needs to determine the appropriate learning strategies needed to meet organizational goals.
4. Collaborates with internal customers and subject matter experts to obtain knowledge of subject areas and develop targeted training curriculum that meets the identified needs of the business. Serves as internal consultant and project leader for instructional design/training related initiatives.
5. Works with other members of the training department to design training programs that are in alignment with adult learning principles and instructional design best practices.
6. Responsible for coordinating the design, development and editing of training assets with internal resources for both audio and visual communication.
7. Conduct needs assessment to understand the needs of the business. Based on the analysis of multiple sources of information, design, develop and revise training and development programs to achieve business objectives and improve on-the-job performance.
8. Analyzes training needs, develops and administers training plans and programs. Expert in the use and ability to develop others to use a wide range of media and design tools used to design and distribute course materials to all company locations.
9. Reviews external training materials for effectiveness, and recommends acquisition of materials that meet the company’s standards.
10. Advises and develops staff members in techniques and methods of developing and evaluating specialized materials and curriculum.
11. Evaluate course effectiveness, recommend and implement modifications based on quantitative and qualitative feedback. Evaluate the success of training effectiveness and return on investment.
12. Apply Kirkpatrick's Four-Level Training Evaluation Model to objectively analyze the effectiveness and impact of training.
13. Build and maintain a comprehensive knowledge of all company processes, procedures related to manufacturing and repair station.

Additional Functions:
1. Travel required. Approximately 20 percent. Perform other duties as assigned.

Other Requirements:
1. Consulting and project management skills, familiarity with a wide variety of training media and a strong foundation in needs assessment, adult learning principles, behavior modeling and competency assessment required.
2. Expert level knowledge of Word Processing software; Adobe Suite Software; Spreadsheet software; Design software and Project Management software.
3. Analytical skills and high-level of attention to detail.
4. Ability to multitask in a fast-paced work environment.
5. High-degree of flexibility and adaptability.
 
Job Number: 7325
Job Location: Savannah, GA
Rate: 70-77
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/03/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Instrumentation Engineering Consultant

Description:
Unique Skills:
Experience with RF Telemetry systems supporting Flight Test activities. Full working knowledge of IADS, TTC DAS, and network equipment configuration and installations.

Education and Experience Requirements:
Bachelor's Degree in related field required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Master's Degree preferred. 5 years of progressively responsible HR experience.

Position Purpose:
The Instructional Design Consultant is responsible for leading the creation and maintenance of all formal and informal training solutions across the enterprise. Develops, enhances and updates the curriculum for all Gulfstream training in order to achieve enterprise wide training solutions. Responsibilities include planning, coordinating and developing strategic training initiatives for the enterprise.

Principle Duties and Responsibilities:
Essential Functions:
1. Operates as an organizational leader and internal consultant to management in the identification, development, and implementation of training solutions.
2. Demonstrates and utilizes effective needs analysis, project management, course development, and evaluation skills in all areas of the business.
3. Evaluates business needs to determine the appropriate learning strategies needed to meet organizational goals.
4. Collaborates with internal customers and subject matter experts to obtain knowledge of subject areas and develop targeted training curriculum that meets the identified needs of the business. Serves as internal consultant and project leader for instructional design/training related initiatives.
5. Works with other members of the training department to design training programs that are in alignment with adult learning principles and instructional design best practices.
6. Responsible for coordinating the design, development and editing of training assets with internal resources for both audio and visual communication.
7. Conduct needs assessment to understand the needs of the business. Based on the analysis of multiple sources of information, design, develop and revise training and development programs to achieve business objectives and improve on-the-job performance. 8. Analyzes training needs, develops and administers training plans and programs. Expert in the use and ability to develop others to use a wide range of media and design tools used to design and distribute course materials to all GAC locations.
9. Reviews external training materials for effectiveness, and recommends acquisition of materials that meet the company’s standards.
10. Advises and develops staff members in techniques and methods of developing and evaluating specialized materials and curriculum.
11. Evaluate course effectiveness, recommend and implement modifications based on quantitative and qualitative feedback. Evaluate the success of training effectiveness and return on investment.
12. Apply Kirkpatrick's Four-Level Training Evaluation Model to objectively analyze the effectiveness and impact of training.
13. Build and maintain a comprehensive knowledge of all Gulfstream processes, procedures related to manufacturing and repair station.

Additional Functions:
1. Travel required. Approximately 20 percent. Perform other duties as assigned.

Other Requirements:
1. Consulting and project management skills, familiarity with a wide variety of training media and a strong foundation in needs assessment, adult learning principles, behavior modeling and competency assessment required.
2. Expert level knowledge of Word Processing software; Adobe Suite Software; Spreadsheet software; Design software and Project Management software.
3. Analytical skills and high-level of attention to detail.
4. Ability to multitask in a fast-paced work environment.
5. High-degree of flexibility and adaptability.
 
Job Number: 17-689-99983
Job Location: Southeast
Rate: $70.00 to $77.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 08/08/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer
 
PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Tuscon area.
 
Roles and Responsibilities (including some or all of the following):
  • System design, analysis, modeling, and simulation
  • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
  • Navigation system error analysis
  • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
  • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
  • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
  • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
  • Defining, analyzing, and reviewing results from model simulations
  • Using results of modeling and simulations to predict performance
  • Updating of models based on designs, test results, and other data
  • Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

  • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
  • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
  • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
  • Experience with statistical analysis of test and simulation results using tools such as MATLAB
  • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
  • Must have demonstrated presentation skills and experience interfacing with customer
  • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
  • Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

  • BS, MS or PhD in engineering or physics
  • Understanding of engineering disciplines including aerodynamics and structural dynamics
  • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

 

 



 
Job Number: 1710065198
Job Location: Tucson, AZ
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Terry Brooke
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIPAA2&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer
 
PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Minneapolis area.
 
Roles and Responsibilities (including some or all of the following):
  • System design, analysis, modeling, and simulation
  • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
  • Navigation system error analysis
  • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
  • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
  • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
  • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
  • Defining, analyzing, and reviewing results from model simulations
  • Using results of modeling and simulations to predict performance
  • Updating of models based on designs, test results, and other data
  • Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

  • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
  • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
  • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
  • Experience with statistical analysis of test and simulation results using tools such as MATLAB
  • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
  • Must have demonstrated presentation skills and experience interfacing with customer
  • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
  • Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

  • BS, MS or PhD in engineering or physics
  • Understanding of engineering disciplines including aerodynamics and structural dynamics
  • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

 

 



 
Job Number: 1710065197
Job Location: Minneapolis, MN
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Roger Greco
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIKAA2&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer
 
PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Los Angeles area.
 
Roles and Responsibilities (including some or all of the following):
  • System design, analysis, modeling, and simulation
  • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
  • Navigation system error analysis
  • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
  • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
  • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
  • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
  • Defining, analyzing, and reviewing results from model simulations
  • Using results of modeling and simulations to predict performance
  • Updating of models based on designs, test results, and other data
  • Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

  • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
  • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
  • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
  • Experience with statistical analysis of test and simulation results using tools such as MATLAB
  • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
  • Must have demonstrated presentation skills and experience interfacing with customer
  • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
  • Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

  • BS, MS or PhD in engineering or physics
  • Understanding of engineering disciplines including aerodynamics and structural dynamics
  • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

 

 



 
Job Number: 1710065202
Job Location: Huntsville, AL
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIoAAM&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer
 
PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Los Angeles area.
 
Roles and Responsibilities (including some or all of the following):
  • System design, analysis, modeling, and simulation
  • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
  • Navigation system error analysis
  • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
  • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
  • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
  • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
  • Defining, analyzing, and reviewing results from model simulations
  • Using results of modeling and simulations to predict performance
  • Updating of models based on designs, test results, and other data
  • Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

  • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
  • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
  • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
  • Experience with statistical analysis of test and simulation results using tools such as MATLAB
  • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
  • Must have demonstrated presentation skills and experience interfacing with customer
  • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
  • Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

  • BS, MS or PhD in engineering or physics
  • Understanding of engineering disciplines including aerodynamics and structural dynamics
  • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

 

 



 
Job Number: 1710065200
Job Location: Los Angeles, CA
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Karla Pelonis
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIeAAM&URLSource=cjhunter

Guidance, Navigation, and Control Engineer

Description:
Guidance, Navigation and Control Engineer
 
PDS Tech is hiring experienced GNC Engineers for current and recurring positions in the Tamarac area.
 
Roles and Responsibilities (including some or all of the following):
  • System design, analysis, modeling, and simulation
  • Flight system performance analysis including nonlinear modeling, digital control, and system effectiveness analysis
  • Navigation system error analysis
  • Simulation - to include evaluation under nominal, off-nominal, and Monte Carlo flight modes
  • Develop, modify, and maintain hazards assessment tools to evaluate instantaneous impact points (IIP) and probability of impact
  • Develop, modify, and maintain GPS and telemetry processing tools for the reduction and analysis of flight test to determine Best Estimate of Trajectory (BET)
  • Prepare presentations, reports, research, and other contract deliverables related to analyses performed
  • Defining, analyzing, and reviewing results from model simulations
  • Using results of modeling and simulations to predict performance
  • Updating of models based on designs, test results, and other data
  • Statistical analysis to quantify effect of individual errors on system accuracy

Required Qualifications:
To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:

  • BS in engineering or physics with 3+ years or MS in engineering or physics with 5+ years engineering experience with complex systems engineering
  • 3+ years' experience with system simulation and software engineering processes (e.g., requirements development for new subsystem, requirements analysis and management, design development and review, configuration management, interface control)
  • 3+ years system simulation and/or data analysis of airborne flight systems or equivalent
  • Experience with statistical analysis of test and simulation results using tools such as MATLAB
  • Experience in at least one of the following: control systems engineering, dynamic six degree of freedom modeling and simulation, launch vehicle analysis, navigation systems. Preference given to multiple skills
  • Must have demonstrated presentation skills and experience interfacing with customer
  • Position requires a proactive, self-starting, independent, flexible engineer with excellent interpersonal skills
  • Must have a current Secret security clearance or able to obtain clearance

Desired Qualifications:
Candidates with these desired skills will be given preferential consideration:

  • BS, MS or PhD in engineering or physics
  • Understanding of engineering disciplines including aerodynamics and structural dynamics
  • Experience in one or more of the following: Kalman Filtering, software development, Linux scripting, makefiles, Python, revision control systems

 

 



 
Job Number: 1710065199
Job Location: Pompano Beach, FL
Duration: 12 months
Input Date: 03/14/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Rebecca Burrows
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i500000021WIZAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance, Nav & Ctrl Eng - Level 3 with active secret TX

Description:
Guidance, Nav & Ctrl Eng - Level 3
Description
Responsible for algorithm development tasks for a guided bomb program. The engineer will develop GNC algorithms and perform analyses using a 6-DOF simulation. The engineer will support integration of the algorithms into flight software and integration of the simulation with Hardware-In-The-Loop. Flight test support, system calibration, and hardware/software integration issue resolution will also be required.
Skill/Experience/Education
Mandatory:

Matlab and Simulink simulation experience
Desired:

Hardware and software test experience
C/C++ programming experience
Familiar with Linux operating system

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
GNC algorithms Design and tune autopilots, guidance laws and navigation filters for guided weapons 4-5 Years Yes
Hardware/software integration 4-5 Years Yes

Special Needs
There is No Special Needs For this Requirement
 
Job Number: DW-1075
Job Location: Grand Prairie, TX
Rate: 94/hr max
Duration: 6 month contract
Input Date: 05/17/2017
Last Updated: 06/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Guidance, Nav & Ctrl Eng - Level 3 with active secret TX

Description:
Guidance, Nav & Ctrl Eng - Level 3
Description
Radar Signal Processing engineer needed for fire control radar development program. Responsibilities will include defining waveforms, performing trade studies, defining radar signal processing requirements, testing signal processing software, supporting hardware and software integration, and interfacing with transmitter and receiver suppliers.
Skill/Experience/Education
Mandatory:

Experience with radar signal processing algorithms, including MTI, PRI selection, acquisition and track logic, and pulse compression

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)
RF signal processing algorithms Waveform design and algorithm development 4-5 Years Yes
Simulation experience Digital simulation of radar system performance including signal processing algorithms 0-3 Years No

Special Needs
There is No Special Needs For this Requirement
 
Job Number: DW-1160
Job Location: Grand Prairie, TX
Rate: 79.50/hr max
Duration: 6 month contract
Input Date: 05/17/2017
Last Updated: 06/28/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hadoop Developer

Description:
Job Description:
Responsible for design, development and delivery of data from operational systems and files into ODSs (operational data stores), downstream Data Marts and files.
Troubleshoot and develop on Hadoop technologies including HDFS, Hive, Pig, Flume, HBase, Spark, Impala and Hadoop ETL development via tools such as Informatica,
Translate, load and present disparate data sets in multiple formats and multiple sources including JSON, Avro, text files, Kafka queues, and log data
Will implement quality logical and physical ETL designs that have been optimized to meet the operational performance requirements for our multiple solutions and products, this will include the implementation of sound architecture, design, and development standards.
Has the experience to design the optimal performance strategy, and manage the technical metadata across all ETL jobs.
Responsible for building solutions involving large data sets using SQL methodologies, Data Integration Tools like Informatica in any Database preferably in an MPP platform.
Has strong Core Java Programming experience to apply in Data Integration.
Works with BA’s, end users and architects to define and process requirements, build code efficiently and work in collaboration with the rest of the team for effective solutions.
Deliver projects on-time and to specification with quality.

Skill Sets Required:
8 years’ experience in managing data lineage and performing impact analyses.
5 years’ experience with ETL tool development
4 years’ experience with Hadoop Eco System
Experience working in Data Management projects.
Experience working in Hive or related tools on Hadoop, Performance tuning, File Format, executing designing complex hive HQL’s, data migration conversion.
Experience working with Spark for data manipulation, preparation, cleansing.
Experience working with ETL Tools ( Informatica/DS/SSIS) for data Integration
Experience designing and developing automated analytic software, techniques, and algorithms
Ability to handle multiple tasks and adapt to a constantly changing environment
Self-starter with the ability to work independently and take initiative. Ability to translate ideas and business requirements into fully functioning ETL workflows.
Strong analytical and problem solving skills.
Excellent written and oral communication skills, with the ability to articulate and document processes and workflows for use by various individuals of varying technical abilities.
Excellent organizational skills.
Knowledge of HealthCare a plus.
Minimum Education:
MS/BS in Computer Science, Information Systems, or related field preferred and/or equivalent experience
Ability to apply mastery knowledge in one of the relational data base (DB2, MSSQL, Teradata, Oracle 8i/9i/10g/11i)
Ability to apply mastery knowledge in one of the Data Integration Tools (Informatica, SSIS.)
Expert ability and hands on experience in SQL and Core Java a must
Experience with Unix/Linux and shell scripting.
Ability to demonstrate experience in distributed UNIX environments
Ability to work both independently and in a collaborative environment
Excellent problem solving skills, communication skills and interpersonal skills
Ability to analyze information and use logic to address work related issues and problems
Ability to demonstrate proficiency in Microsoft Access, Excel, Word, PowerPoint and Visio.• Ability to present to a group.
Experience working in Agile, DevOps environment a plus.
Experience or knowledge of web architecture, (Javascript, SOAP/XML, Weblogic, Tomcat) is a plus
Experience with an ORM framework, SOA Architecture, Microservices is a plus.
Experience with Middleware components (ESB, API Gateway) is a plus.


Job Title: Senior/Lead Hadoop Developer
Duration: 6 Months
Location: Irving, TX 75038
 
Job Number: 3200
Job Location: Irving, TX
Rate: $76.92/hr
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Human Resources Support 2

Description:
Human Resources Support 2

Location: Camden, AR
Pay Rate: DOE ($12/hr - $15.67/hr)
Duration: 4 month contract
**MUST be a U.S. CITIZEN**

Duties:
•Handle sensitive and confidential information
•Maintain employee records and prepare reports
•Provides information and produces simple correspondence as required
•Utilizes office equipment necessary for the completion of assigned tasks
•Performs related duties as assigned

Skills (Required):
•Familiarity with a variety of concepts, office practices, filing systems, record keeping, policies and procedures associated with functional areas of Human Resources
•Computer skills/systems and applicable software such as Microsoft Office, including Word, Excel, PowerPoint, etc
•Filing Skills
•Human resource administration
•Employee records

Desired:
•Presentation Skills and or experience
•College degree

Education:
-High School Diploma or equivalent and 2 years of related experience
 
Job Number: 7419
Job Location: Camden, AR
Rate: 12-15.67
Per Diem: No
Overtime: Possible
Duration: 4 mos
Start Date: ASAP
Input Date: 05/11/2017
Last Updated: 08/03/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Industrial Engineer II

Description:
Industrial Engineer II

Location: Savannah
Rate: $35.00 - $38.00/HR
Duration: Long Term contract
Shift: 1st Shift


Unique Skills:
* Shop floor layout (6S)
* Maintenance ground support experience.


Education and Experience Requirements:
Bachelor’s degree in Industrial, Manufacturing Engineering or related curriculum, or an equivalent combination of education and experience. Proven knowledge of Lean and/or Six Sigma principles. Three (3) years Industrial Engineering, Manufacturing Engineering, or related technical experience. Ability to read and interpret blueprints and facility layouts. Ability to operate personal computers, CAD systems, and appropriate software.


Position Purpose:
Under minimal supervision, provides Industrial Engineering support through the application of classical and Lean Industrial Engineering principles. Assures assigned projects are accomplished within projected or approved cost.

Principal Duties and Responsibilities:
Essential Functions: 1. Perform all activities necessary to support assigned area, providing timely response to all requests. Assure assigned projects are accomplished within projected time and approved costs. 2. Prepare and submit necessary paperwork for equipment, machinery, and facilities acquisition including justifications and economic analysis. 3. Initiate and implement cost reduction programs. 4. Implement plant layout, process flow, and material handling techniques 5. Maintain and submit daily/weekly/monthly activity reports and project status. 6. Investigate, evaluate, and implement facilities expansions, department rearrangements, new technologies and manufacturing techniques, employee suggestions, and make-or-buy proposals. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of IE policies and procedures. 8. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 9. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 10. Support all Safety, Sustainability and Ergonomic initiatives as required.

Additional Functions: 1. Develop and maintain work place methods and manpower requirements. 2. Assist in the training and development of entry-level industrial engineering personnel. 3. As required, aid in development and maintenance of Business Continuity Plan. 4. Perform other duties as assigned.
 
Job Number: 7303
Job Location: Savannah, GA
Rate: $35.00 - $38.00/HR
Per Diem: Possible
Overtime: Possible
Duration: LT
Input Date: 04/12/2017
Last Updated: 06/19/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) with active secret FL

Description:
159671/7222476
Job Title: Information System Security Officer (ISSO)
Keywords:
Number of Positions: 1
Remaining Positions: 1
Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:
a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
d. Report all security-related incidents to the ISSM;
e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
f. Serve as member of the CCB, if designated by the ISSM;
g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
h. Formally notify the ISSM when changes occur that might affect system authorization;
i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
k. Ensure audit records are collected and reviewed; and
l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
Skills: Minimum Qualifications
- Current SECRET (or higher) DoD Security Clearance
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
- Experience with Microsoft Windows and/or Linux system administration (2+ years)
- Familiarity with configuration control and change management (SCCM)
- Experience with networking concepts (switches, network security, TACLANE)
- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies
- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies
- Operating System and networking certifications
- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

Additional Details
The ideal candidate for this position must be able to:
- Report to work on time
- Perform job duties for a specific duration of time or within a given period of time
- Follow directions based on government requirements and company policies
- Interact well with co-workers and customers
- Accept constructive criticism
- Maintain regular/consistent attendance and a full-time schedule
- Maintain current status on projects
- Stay current on training requirements
- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


Skills: Required
• CYBER SECURITY
• LINUX
Additional
Languages: English( Speak, Read, Write )

State/Province: Florida
City/Town: Jupiter


Start Date: 06/19/2017 Hours Per Week: 40.00
Est. End Date: 12/30/2017 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7222476
Job Location: Jupiter, FL
Rate: 52/hr max
Duration: 6 month contract
Input Date: 06/19/2017
Last Updated: 08/02/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Information System Security Officer (ISSO) with active secret VA

Description:
159639/7213927

Job Title: Information System Security Officer (ISSO)

Number of Positions: 1
Remaining Positions: 1
Duties: ** An active SECRET (or higher) DoD Security Clearance is required **

** A current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP) is required **

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

-The ISSO is responsible for ensuring the appropriate operational security posture is maintained for an information system (IS) and as such, works in close collaboration with the Information System Security Manager (ISSM).
-The ISSO shall have the detailed knowledge and expertise required to manage the security aspects of an IS and is assigned responsibility for the day-to-day security operations of a system.
-Responsibilities also include physical and environmental protection, personnel security, incident handling, and security training and awareness.
-In close coordination with the ISSM, the ISSO plays an active role in monitoring a system and its environment of operation to include developing and updating the System Security Plan (SSP), managing and controlling changes to the system, and assessing the security impact of those changes.

Responsibilities of the ISSO include, but are not limited to:
a. Ensure systems are operated, maintained, and disposed of in accordance with security policies and procedures as outlined in the security authorization package;
b. Attend technical and security training (e.g., operating system, networking, security management) relative to assigned duties;
c. Ensure all users have the requisite security clearances, authorization, need-to-know, and are aware of their security responsibilities before granting access to the IS;
d. Report all security-related incidents to the ISSM;
e. Conduct periodic reviews of ISs to ensure compliance with the security authorization package;
f. Serve as member of the CCB, if designated by the ISSM;
g. Coordinate any changes or modifications to hardware, software, or firmware of a system with the ISSM prior to the change;
h. Formally notify the ISSM when changes occur that might affect system authorization;
i. Monitor system recovery processes to ensure security features and procedures are properly restored and functioning correctly;
j. Ensure all IS security-related documentation is current and accessible to properly authorized individuals;
k. Ensure audit records are collected and reviewed; and
l. ISSO shall be adequately trained and possesses technical competence commensurate with the complexity of the ISs.
Skills: Minimum Qualifications
- Current SECRET (or higher) DoD Security Clearance
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)
- Experience with Microsoft Windows and/or Linux system administration (2+ years)
- Familiarity with configuration control and change management (SCCM)
- Experience with networking concepts (switches, network security, TACLANE)
- Experience with security concepts (Data Loss Prevention, Active Directory, and Security Log Analysis)
- Active and continuous learner - either higher education or Continuing Professional Education

Required Competencies
- Strong written and verbal communication skills; ability to present reports to management; motivated to thoroughly investigate, analyze, and document system issues and resolutions
- Ability to produce quality deliverables and to complete assigned projects on time; provides consistent status updates to ensure IT security projects stay focused
- Consistent attention to detail - completes tasks per standard operating procedures; reports discovered anomalies and inconsistencies
- Persistent and creative problem solver - strong troubleshooting skills and determined to find solutions to technical problems; identifies root cause and presents possible solutions to management
- Strong work ethic and a proven professional - respectful, dependable, takes initiative and follows through, dedicated to excellence and getting the job done

Preferred Competencies
- Operating System and networking certifications
- Knowledge of and experience with compliance to government regulations and standards (NIST Special Publications, NISPOM, Risk Management Framework, etc.)
- Direct experience with a Department of Defense (DoD) or Defense Industrial Base (DIB) company supporting critical information systems

Additional Details
The ideal candidate for this position must be able to:
- Report to work on time
- Perform job duties for a specific duration of time or within a given period of time
- Follow directions based on government requirements and company policies
- Interact well with co-workers and customers
- Accept constructive criticism
- Maintain regular/consistent attendance and a full-time schedule
- Maintain current status on projects
- Stay current on training requirements
- Solve issues and incidents in the field and be willing to work after hours as needed to complete an urgent and important task
- Effective service depends upon the contractors performing duties to the best of their abilities; frequent absences will disrupt business operations and create additional work for coworkers; prompt and regular attendance is critical to the success of the company's mission.

Education: - Undergraduate degree in Information Technology or Cyber Security, but candidate with proven experience will not be excluded from consideration
- Current DoD 8570 Baseline Certification (Security+ CE, CAP, GSLC, CASP CE, CISA, CISM, or CISSP)


Skills: Required
• CYBER SECURITY
Additional
Languages: English( Speak, Read, Write )

State/Province: Virginia
City/Town: Gainesville
Address: 5731 Wellington Road


Start Date: 06/05/2017 Hours Per Week: 40.00
Est. End Date: 06/01/2018 Hours Per Day: 8.00
Schedule Notes: Days Per Week: 5.00
 
Job Number: MB-7213927
Job Location: Gainesville, VA
Rate: 67.50/hr max
Duration: 12 month contract
Input Date: 08/23/2017
Last Updated: 09/12/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Instrumentation Engineer

Description:
Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing. This can involve testing, data analysis, and interface with all aspects of the engineering department. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties: Support laboratory testing of Space Station hardware, Develop and validate tooling concepts, Author and maintain operation/test procedures, Preparation of standardized operation/test sheets, Defining test rig and facility requirements, Participation on program Integrated Product Development teams, Review drawings and concepts, and resolve producibility concerns.

Experience with advanced instrumentation and data acquisition systems is required. Knowledge of LabVIEW desired. Experience should also include five years working on the testing of complex mechanical systems, testing of electrical systems and components such as motor controllers, actuator controls, & system controllers. Capability of working independently and is self-motivated. Excellent communication skills, written and verbal are required. Ability to proficiently operate common Microsoft Office software products is required.
 
Job Number: CT36053
Job Location: Windsor Locks, CT, CT
Rate: 67.00
Per Diem: Possible
Overtime: Possible
Duration: 1 year
Input Date: 06/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Bill Carriveau
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Integration and Test Engineer - Level 2

Description:
Integration and Test Engineer - Level 2

Location: Moorestown, NJ
Rate: $55.00 - $57.00/HR
6+ month contract
1st Shift

**Must have an active SECRET clearance**

Description:
- The candidate will perform the unit level test, engineering integration and test, engineering test & evaluation and support system level testing of COTS or custom computing hardware and real-time embedded signal processing firmware/software applications.
- This engineer will be responsible for performing software/firmware development assignments from requirements through final testing.
- This engineer will work with domain experts and military documentation to develop test software requirements, procedures, code and execute the tests.
- This candidate will be responsible for designing and implementing system components using Object Oriented methods in C++.
- This candidate should have an academic background and experience in: digital signal processing implementation, C/C++ programming, and simulation tools such as MATLAB.
- The candidate must have excellent organizational skills, interpersonal skills and be able to communicate at both programmatic and technical levels with subordinates, peers, senior management levels and the customer.

Skill/Experience/Education
Mandatory:
- BS Degree in Electrical Engineering or Electrical and Computer Engineering.
- Minimum of 8 years of professional level experience testing hardware subassemblies, nests, cabinets and systems for functional and performance requirements.
- Experience in testing digital signal processing hardware and real-time software applications using C++ Object Oriented design and programming.
- Configuration management and change management experience using ClearCase, ClearQuest and UCM.
- Must be able to obtain and maintain a DoD Secret level security clearance.

Desired:
Simulation tools experience such as Matlab.
 
Job Number: 7085
Job Location: Moorestown, NJ
Rate: $55.00 - $57.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Input Date: 02/16/2017
Last Updated: 06/19/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Level 3 NC Programmer

Description:
One year contract

Wichita, KS

1st shift
•Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams.
•Establishes technical requirements for manufacturing and producibility.
•Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies.
•Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software.
•Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.
•Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media.
•Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

•Education/Requirements

Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

AFP (automated fiber placement)

CDG experience

Catia V5

3/5 axis

Vericut

MS Office

Primary soft/hard metal programming experience

SAP is helpful but not needed
 
Job Number: 51722
Job Location: Wichita, KS
Duration: 12 months
Input Date: 06/07/2017
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Material Handler NM

Description:
159640/7209393
Job Title: Material Handler
Keywords:
Number of Positions: 1
Remaining Positions: 1
Duties: • Transports materials to or from storage to designated area. 60%
• Counts, weighs, and records number of units of materials moved or handled on material forms. 5%
• Reads shop order or follows oral instructions to ascertain materials or containers to be moved. 5%
• Loads and unloads materials onto or from pallets, trays, racks, and shelves. 20%
• Follows all safety policies and procedures.
• Maintains the highest level of cleanliness and organization in responsible areas. 10%
Skills: • Ability to use a computer and to learn business software
• Ability to convert and accurately use various units of measure (sq. feet to inches, metric to English, etc.)
• Experience working within an ISO controlled organization
Physical Demands
• Very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day
• Frequently lifts or moves items over 50 pounds
Required experience:
• Material Handling: 1 year
Education: High school diploma or general education degree (GED) preferred


Skills: Required
• MATERIAL HANDLERS
• ISO
• COMPUTER DATA ENTRY
Additional
• MATERIAL HANDLING
• MATERIAL HANDLER
Languages: English( Speak, Read, Write )

State/Province: New Mexico
City/Town: Socorro


Start Date: 05/29/2017 Hours Per Week: 40.00
Est. End Date: 12/29/2017 Hours Per Day: 10.00
Schedule Notes: Days Per Week: 4.00
 
Job Number: MB-7209393
Job Location: Socorro, NM
Rate: 12.50/hr max
Duration: 6 month contract
Input Date: 06/12/2017
Last Updated: 06/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer - Level 2

Description:
Mechanical Design Engineer - Level 2

Location: Dallas, TX
Rate: $50.00 - $60.00/HR
6 month contract
1st Shift

**Must have a current ACTIVE secret clearance**

Description
- Mechanical Design Engineer to support the Tactical Missiles Advanced Programs (TMAP) area design effort.
- Tasks will include conceptual and detail design of missile components, systems, and subsystems, and creation of 3D solid models and 2D drawings.
- Effort will require coordination of design(s) with other mechanical / electrical disciplines, familiarity with Solid Rocket Motors (SRMs), SRM suppliers, booster separation systems, and tolerance analysis.
- Must have Active Secret Clearance at time of submittal, preferably within the last 5 years. Please provide status of clearance on resume.


Skill/Experience/Education
Mandatory:
- Candidate should have a Bachelors of Science degree in Mechanical Engineering, or 10 years of equivalent experience, and 6-8 years of Computer Aided Design software experience using PRO Engineer / CREO 3.
- Candidate must be capable of creating and interpreting detail, assembly, and installation type drawings, knowledge of Geometric Dimensioning and Tolerancing, and experience with manufacturing engineering and fabrication processes.
- Familiarity with Microsoft Office applications is desired.
 
Job Number: 6908
Job Location: Grand Prairie, TX
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 06/20/2017
Last Updated: 07/11/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Mechanical Engineer

Description:

PDS Tech, Inc. is seeking a Mechanical Engineer for a position located in Kansas City, MO. 
Must hold an active clearance (preferably a DOE Q, or could be a DOD TS).

The Client's organization has several open opportunities for Mechanical Engineers.  We are seeking engineers who are interested in supporting one or more of the following areas:  product engineering, process engineering, purchased product engineering, systems engineering and mechanical testing.  Job title will be commiserate with level of experience. 

 
  • Completes assignments and provides detailed instructions in the design and/or project management of new and current projects, products, programs, components, tools and acceptance equipment under technical guidance of higher level engineers or departmental management
  • Participates in establishing operating procedures on new products and components
  • Assists in the development of test procedures and performance of routine to moderately complex engineering evaluation tests, product and process capability studies, quality audits, product or project data reviews, and other engineering evaluation work
  • Evaluates opportunities for defect prevention based on standard or accepted solutions
  • Prepares evaluation reports, analyzes discrepancies, and makes recommendations for product, test equipment, procedures and manufacturing or operating processes that improve productivity and quality and reduce flowtime
  • Assists in the preparation of product or project definitions, manufacturing drawings and specifications, and test equipment designs
  • Defines and acquires tooling, gaging and other equipment necessary to manufacture parts and to assure product quality
  • Interacts with design agencies, suppliers and/or internal organizations such as the Integrated Supply Chain to assist in resolving design, development, production and acceptance issues
  • Provides technical assistance in appropriate assigned field
  • Evaluates and makes recommendations regarding technological advances that improve productivity and quality,reduce flowtime, and enhance operational surety
  • May perform other duties as required
  • Conducts activities in a safe and healthy manner and works in accordance with established ES&H requirements to ensure the protection of associates, the public, and the environment. Takes actions necessary to stop work when an unsafe condition or action is identified. Every employee has the right and responsibility to stop work when unsafe conditions or actions are identified.

Basic Qualifications: 
  • US citizenship in order to obtain and maintain US Dept of Energy "Q" level security clearance.
  • Bachelor of Science degree in Mechanical Engineering from an ABET accredited program or an equivalent ABET accredited engineering degree.
  • Minimum three (3) years of professional technical experience.
  • Proficiency in Microsoft Excel, Word and PowerPoint required

Additional Qualifications: 

  • Hands-on experience with 3D design software like Creo or SolidWorks
  • Effective verbal, written and presentation skills
  • Knowledge of continuous improvement methodologies including Six Sigma
  • Previous experience in a manufacturing environment
  • Experience in engineering related administrative activities such as configuration management, financial reporting, product testing procedures & data entry preferred
  • Proven ability in decision making and organization, planning and problem solving skills
  • Ability to work under minimal supervision, with latitude for independent action and decision making.
  • Good people skills, ability to motivate teams to produce on-target and timely results.
  • Demonstrate project/program management via multiple priorities/projects
  • Ability to plan and organize, demonstrate excellent time management and support several projects at once
  • Willingness to travel on occasion

 
Job Number: 1710068729
Job Location: KS City, MO
Duration: 6 months
Input Date: 05/26/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Tanya James
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002JrH0AAK&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
N/C Programmer - Numerical Control Programmer (OR)

Description:
Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment.

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. Must have Catia V5 Experience. See attached brochure for specifics on type of machine that the candidate must be able to program for.
 
Job Number: NCor
Job Location: Portland, ORE
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 06/09/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer

Description:
Numerical Control Programmer 3

Location: Portland, OR
Duration: 6+ Months

Job Description:
Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.

Education / Experience:
- AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.
- Must have Catia V5 Experience.
- See attached brochure for specifics on type of machine that the candidate must be able to program for.

- Looking for CNC Programmer familiar with programming for DMG Mori Dual Spindle Dual Turret Lathes or very similar type machine.
- Ideal candidate will be able to program this type of machine using Catia V5.
 
Job Number: 17-10488
Job Location: Portland, ORE
Per Diem: Yes
Duration: 6 months
Start Date: Asap
Input Date: 07/06/2017
Last Updated: 08/09/2017
Firm Name: ICONMA LLC
Attention: Mohamed Zoheb
Address: 850 STEPHENSON HWY STE 612
City, State: TROY, MI 48083
Phone: 248/602-3856
Website: iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (KS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Requirements: Level 3

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

1st Shift
OT is NOT being worked at this time
No travel involved
No Per Diem

SKILLS NEEDED:
AFP experience
CDG experience
Catia V5
3/5 axis
Vericut
MS Office

Primary soft/hard metal programming experience
SAP is helpful, but not needed

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-511929KS
Job Location: Wichita, KS
Rate: $ BOE/HR
Per Diem: No
Overtime: No
Duration: 11 Months
Start Date: 06/09/2017
Input Date: 05/31/2017
Last Updated: 06/22/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer (Catia)

Description:
Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.

Candidate must state level of proficiency (beginner, intermediate or advanced) in the following required skills:
Category Name Required Level
Technical Skills Mill and Lathe Operations Yes Advanced
Technical Skills Set-up and Operate Lathe and Milling Machine Yes Advanced

AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience. Must have Catia V5 Experience. Looking for CNC Programmer familiar with programming for DMG Mori Dual Spindle Dual Turret Lathes or very similar type machine. Ideal candidate will be able to program this type of machine using Catia V5. Must be US Person for purposes of Export Compliance.
 
Job Number: 38445
Job Location: ORE
Rate: 60/hour
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 06/09/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Level 3 (KS)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams. Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans. Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience

Location: Wichita, KS
Duration: 6 Months
1st Shift
OT is being worked
Not a lot of travel involved with this position.
Possible travel to McAlester
No Per Diem - local Talent Requested

SKILLS NEEDED:
Catia V5
3/5 axis
Vericut
MS Office
Primary soft/hard metal programming experience
SAP is helpful

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-494796KS
Job Location: Wichita, KS
Rate: $50/HR BOE
Per Diem: possible split
Overtime: Yes - Possible
Duration: 6 Months
Start Date: 7/7/2017
Input Date: 06/28/2017
Last Updated: 07/12/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmer - Level 3 (OK)

Description:
Provides numerical control, machining, and programming technical expertise to cross-functional engineering and manufacturing teams.

Establishes technical requirements for manufacturing and producibility. Plans, creates, verifies, and revises machine control data and documentation that directs the operations for numerically controlled machines and robots required to manufacture and inspect parts, tools and assemblies. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, and software. Apply knowledge of engineering data, geometric dimensioning and tolerancing, and machine control languages in order to plan, create and revise machine-control data and associated inspection plans.

Ability to create and revise measuring machine programs and/or computer generated solid models, statistical process-control graphic aids, in-process inspection graphic aids, and key characteristics media. Ability to create and/or validate machine-control data, inspection point coordinate data and documentation.

Education/Experience:
Bachelor's and 6 to 9 years' related work experience, a Master's degree and 4 to 7 years' related work experience or an equivalent combination of education and experience.

1st Shift
OT is, as needed
No Travel associated with this position

SKILLS NEEDED:
SmartCam is required
Strong 3/4 axis experience
Catia V5 is helpful, but not required
SAP is helpful, but not required

FOSTER DESIGN'S BENEFITS:
• Working for a 53-year old company
• Minimum 6 Paid Holidays
• Blue Cross Blue Shield – Group Medical Insurance Plan
• MetLife LTD – Long Term Disability Insurance
• Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
• Vacation Pay
• Paid Weekly (Direct Deposit)
 
Job Number: FD-514529OK
Job Location: McAlester, OK
Rate: $BOE/HR
Per Diem: Possible - Plus Possible Split
Overtime: as needed
Duration: 6-11 Months or possibly longer
Start Date: 06/09/2017
Input Date: 06/21/2017
Firm Name: FOSTER DESIGN INC
Attention: Recruiter
Address: 200 W DOUGLAS AVE STE 110
City, State: WICHITA, KS 67202
Phone: 316/832-9700
800 Phone: 800/345-3394
Fax Phone: 316/832-9357
Website: www.fosterdes.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Programmers with DMG Mori Dual Spindle

Description:
Provides numerical control, machining and programming technical experience for a Dual Spindle Dual Turret Lathe. Establishes technical requirements for manufacturing and producibility Dual Spindle Dual Turret Lathe. Plans, creates, verifies and revises Machine Control Data (MCD), geometry and documentation that directs the operations for DMG Mori or Similar type numerically controlled equipment required to manufacture and inspect parts, tools and assemblies for departmental work. Plans and guides the development and integration of new machining techniques and manufacturing methods, processes, software and equipment. Works under general direction.
 
Job Number: BO-OR
Job Location: Portland, ORE
Rate: $62.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 06/26/2017
Last Updated: 07/10/2017
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Palo Alto Firewall and/or Blue Coat Proxy Administrator

Description:
Active Secret Clearance Required. Serious inquiries only.

Palo Alto Firewall and/or Blue Coat Proxy Administrator

Duties:
- Administer, manage, operate, maintain, install and configure 690 COG AOR network boundary devices and technologies.
- Working with Communications Squadrons and other base-level authorities to maintain and administer security boundary components at locations IAW DoD and AF standards and guidance, using industry best practices
- Changing, upgrading, and patching boundary devices requiring two-person compliance through established change management procedures
- Participating in project management, planning, implementation and installation to ensure configuration and integration conforms to baseline architecture
- Identifying potential threats
- Managing resolution of security violations
- Maintaining and operating Intrusion Prevention Systems (IPS)
- Troubleshooting and correcting IPS induced service issues
- Maintaining physical infrastructure to include troubleshooting and operating system patching
- Granting and restricting administrative access to boundary devices according to authorization rules
- Working with communication units to maintain and administer security boundary components at locations IAW DoD and AF standards and guidance
- Identifying potential threats and managing resolution of security violations
- Monitoring and troubleshooting intrusion prevention boundary devices using Government provided toolsets (such as SCOM, SolarWinds, SMARTS and NETCOP/NETCOOL)
- Monitoring network boundaries to provide intrusion detection, identification, and internal/external IT threat analysis
- Preserving, protecting, recovering and reconstituting friendly cyberspace capabilities before, during and after network attacks
- Making changes/upgrades/patches to boundary devices requiring two-person compliance through established change management procedures
- Responding to and accomplishing change request actions and documenting changes, upgrades, patches
- Responding to outages and resolving and documenting priority incident tickets
- Accomplishing network maintenance during the Government-prescribed maintenance windows
- Troubleshooting web connectivity problems
- Granting and restricting administrative access to boundary devices according to authorization rules
- Installing, configuring, operating, maintaining, monitoring, administering, and troubleshooting of network and network defense technologies (e.g., firewalls, application-based firewalls, intrusion detection systems, web proxy devices and servers, and associated software)
- Participating in project management, planning, implementation and installation to ensure configuration and integration conforms to baseline architecture
- Making changes, upgrades, and patches to boundary devices requiring two-person compliance through established change management procedures

Please Note: Shift work is possible.

Bachelors Degree in Computer Science or a related technical discipline, or the equivalent combination of education, technical certifications or training, or work experience.

5-8 years of directly related experience in systems administration and analysis.

Requirements:
- Current 8570 IAT II Level Certification (CNA-Security, GICSP, GSEC, Sec+ CE, SSCP) or higher
- Experience working with Palo Alto Firewalls and/or Blue Coat Proxies

Desired Experience/Certifications:
- Blue Coat Certified Professional
- Certified Infoblox Core Administrator (CICA)
- Red Hat Certified System Administrator (RHCSA)
- Blue Coat Certified Administrator
- CompTIA Linux+
- Palo Alto Accredited Configuration Engineer (ACE)
- SolarWinds Certified Professional
- Wireshark Certified Network Analyst (WCNA)
 
Job Number: 17-28174
Job Location: Colorado Springs, CO
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/08/2017
Firm Name: NESCO RESOURCE
Attention: Kevin
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Process Improvement Analyst / Quality / CMMI Six Sigma SAP Oracle Access Sharepoint CA

Description:
Job Title: Process Improvement Analyst
Job Number: 159266/12198
Location: San Diego, CA
Compensation: DOE
Assignment Length: contract

Description:


• General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

• We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

• We have an exciting opportunity for a Process Improvement Analyst, specializing in software processes. This person will Support integrated teams to measurably enhance overall business practices including, but not limited to: Lessons Learned, Measurement & Analysis, Business Process Improvement initiatives, Lean Manufacturing concepts and Structured Problem Solving.

DUTIES AND RESPONSIBILITIES:

• Design and implement process improvement programs through collaboration with multiple disciplines to improve the company’s technical, cost and schedule performance through continuous improvement.

• Develop and implement system improvements to maintain process excellence with particular emphasis on software process improvement.

• Analyze improvement programs and potential results.

• Establish and maintain performance metrics to measure program success and develop systems to regularly review metrics to improve processes.

• Perform statistical analysis to identity issues and root causes and develop solutions to unusually complex problems.

• Measure activities using different techniques, such as Lean/Six Sigma, etc.

• Install process excellence supports for program governance, project reviews, communications, training, certifications and awards.

• Coordinate with related business areas to ensure process improvements are successful across the company.

• Develop process description documents, instructions and training material. Participate in training of personnel.

• Serve as a consultant to management on major issues and provide updates on projects, goals, success criteria and results.

• Work with integrated teams to measurably enhance overall business practices.

• Provide direction, leadership and training to support staff or less experienced professional and technical staff.

• Participate in creating a path forward to reaching CMMI level 3.

• Participate in CMMI appraisals and AS9100 audits.

• Maintains the strict confidentiality of sensitive information.

• Performs other duties as assigned.

• Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company. Expected to work in a safe manner in accordance with established operating procedures and practices.

Qualifications Essential Qualifications

• Typically requires a Bachelor's degree in a related field and ten or more years of progressive process improvement and/or quality work experience. Equivalent professional experience may be substituted in lieu of education.

• Must demonstrate a broad understanding of process improvement practices, quality procedures and system requirements in an engineering and/or manufacturing environment; the ability to identify and interpret complex data; the ability to develop and present detailed statistical reports and documents; excellent interpersonal, verbal and written communication skills to explain complex information effectively with all levels of employees; excellent organization skills to maintain flow of work within the unit; the ability to establish priorities and meet deadline; and strong knowledge of computer operations and applications.

• Ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.

Additional Qualifications

•Typically requires a Bachelor’s degree in a related field such as Math, Business or a technical field, and ten or more years of quality systems and/or engineering experience working in a technical industry such as aerospace, semiconductor manufacturing, or communications. Equivalent professional experience may be substituted in lieu of education.

• Must demonstrate a broad understanding of process improvement practices, quality procedures and system requirements in an engineering environment; the ability to identify and interpret complex data; the ability to develop and present detailed statistical reports and documents.

• Formal training in CMMI for Dev V1.3 is desired

• Project Management experience in acquiring a CMMI Level 3 rating for a company, is preferred

• Knowledge of statistics and structured problem solving methods.

• Green or Black Belt Six Sigma is desired.

• Access, SharePoint, SAP and/or Oracle experience is desired.

• Formal training in 6 Sigma and strong background in measurement and analysis development and reporting. Familiarity with software development, subcontract management, test, project engineering, and program management.

• Excellent interpersonal, verbal and written communication skills to explain complex information effectively with all levels of employees.

• Excellent organization skills to maintain flow of work within the unit.

• The ability to establish priorities and meet deadline; and strong knowledge of computer operations and applications.

• Ability to work both independently and lead in a team environment is essential as is the ability to work extended hours as required.
 
Job Number: JE-12198
Job Location: San Diego, CA
Duration: 6 month contract
Input Date: 06/14/2017
Last Updated: 06/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Procurement Engineer - Level 3

Description:
Procurement Engineer - Level 3

Location: Tampa, FL
Pay Rate: DOE ($25/hr - $45/hr)
Duration: 6 month contract
Shift: First, 5/40
Travel: Yes; Lackland AFB San Antonio, TX
***MUST have an ACTIVE SECRET CLEARANCE***

Description
-Coordinates with Subcontract Management Team, Procurement Engineering Management, Systems Engineering, the Suppliers (CAE USA) and Industry experts to facilitate the design, production, test and qualification of aerospace and defense products.
-Analyzes technical data, designs, preliminary specifications, manufacturing limitations, supplier facilities, and parts/equipment availability.
-Investigates and recommends potential suppliers based on assessments of response to specifications, costs, inspection of facilities, and historical performance.
-Facilitate technical trade-offs and standardization that may lead to more economical procurement.
-Recommends design changes or process improvement to mitigate production issues.
-Leads teams of Supplier and internal staff in collaboratively solving problems in Producibility, Quality, Inspection, Cost, Mistake-Proofing, Test, Reliability and Affordability while based in supplier facility and customer site.
-Provides technical solutions to a wide range of difficult problems.
-Solutions are imaginative, thorough, and practicable, and consistent with organization objectives.
-Works under general direction only and independently determines and develops approach to solutions.
-Work is reviewed upon completion for adequacy in meeting objectives.
-Reports directly to the Lead Procurement Engineer on the C-5 program.
-Provides surveillance and Quality Assurance direction to supplier while supporting the program needs.
-Experience with requirements management and flowdown to supplier.
-Reviews and approves Supplier Statements of Work (SSOW), technical specification, and supplier deliverables (SDRLs).
-Onsite Quality Assurance representative on program assuring data trend analysis, lean practices, process improvement, operating procedure compliance, quality control, supplier surveillance, containment activity, supporting TKOs/RBATs/PACs, continuous improvement, configuration management, and root cause analysis following AS9100, ISO9001, ASQ, and CMMI.

Skill/Experience/Education (MANDATORY):

-Quality Assurance (4-5+ years experience)
-Supplier Quality Assurance (4-5+ years experience)
-Hardware Engineering (4-5+ years experience)
-Test Verification/Validation (4-5+ years experience)
-Configuration Management (4-5+ years experience)
-ISO 9001: 2008 training (required)
-AS9100C training (required)
-Lockheed Martin Procure 2 Pay (P2P) training (required)
-Auditor training (required)
-Engineering or Technical 4-year Degree
-Process Improvement
-Purchase Orders
-Physical and Software Configuration Audits
-Source Inspections
-QMS
-Risk Assessment
-ASQ
-Corrective Action and Prevention
-Reliability
-Logistics
-Excel


Desired:
-Subcontracts Management (0-3+ years experience)
-Systems Engineering [aircraft avionics systems] (0-3+ years experience)
-Green Belt/Black Belt Certification
 
Job Number: 7345
Job Location: Tampa, FL
Rate: 25-45
Per Diem: Split Possible
Overtime: Yes
Duration: 6 mos
Start Date: ASAP
Input Date: 04/19/2017
Last Updated: 11/14/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Management Engineer II (MO)

Description:
Training Systems and Government Services (TSGS) has a need for an experienced Product Lifecycle Management (PLM) engineer who will function in a Program environment in direct support of Product Lifecycle Management (PLM) activities.
These PLM activities are focused on tasks associated with Configuration Change Board (CCB) facilitation, software and hardware configuration management, and data configuration management. The successful candidate will perform the following tasks.
She/he will:
1. Perform baselines using ClearCase and ClearQuest and create media for software installations and deliveries, and will be responsible for maintaining and tracking all media.
2. Provide Configuration Management CDRL inputs to meet contractual requirements.
3. Assist with the documentation of Configuration and Data Management standards, processes and tools.
4. Track and report on Risks and Action Items Status.
5. Works under general direction.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering
 
Job Number: ProdDMgmtMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/03/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planner

Description:
Program Planner Sr. – This individual prepares, coordinates and maintains plans and schedules for software group using Agile methodologies.

Individual will follow Agile Earned Value Management (EVM) guidebook to lead software team in building a successful, achievable Agile IMS schedule.

Individual will communicate schedule impacts and propose corrective actions to applicable stakeholders. Additionally, this individual will formulate and recommend corrective action measures such as schedule revisions, manpower adjustments, fund allocations, and work requirements where necessary.

This Sr. Program Planner will work to develop an integrated plan bringing Program Planning and Agile planning together into an integrated schedule.

The following basic qualifications are required: A Bachelor’s degree from an accredited college in a related discipline, or equivalent experience/combined education is required; experience with MS tools suite, including MS Project; experience using Agile management tools in support of Earned Value Management (EVM) or similar system; trained in Agile development techniques; and understands basic concepts of Program Management and ability to interact with peers and management.

Desired skills are experience with Fast Track, MS tool suite, and Agile management tools such as JIRA or VersionOne software.
 
Job Location: Littleton, CO
Input Date: 06/15/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Planning & Scheduling Analyst I

Description:
Program Planning & Scheduling Analyst I
Savannah, GA
Long Term Contract
$30.00/Hr

Unique Skills:
Experienced with Aircraft Maintenance Scheduling: Scheduled Maintenance, Modification Period Scheduling, Flying Schedule, Flying Schedule effectiveness and Time Change component scheduling.

Education and Experience Requirements:
Bachelors Degree in Industrial Engineering, Business Administration, or related curriculum, or an equivalent combination of education and experience to successfully perform the essential functions of the job. Two (2) years formal scheduling experience. Requires proven experience with PC based software such as MS Excel, Project, Access, Word and Power Point. Experience with resource loaded plans desired.

Position Purpose:
Under general supervision gathers given information, organizes and produces schedules, program plans, financial and resource plans, and other duties needed to support assigned programs. Responsible for supporting the team with resource loaded plans and forecast analysis as required.

Principal Duties and Responsibilities:

Essential Functions: 1. Produce resource loaded schedules and/or financial operations of assigned programs with gathered activities, hours, and budget. 2. Produce recovery plans as requested using given information. 3. Utilize tools provided for collecting and maintaining program analysis and detail level data. 4. Prepare status reports and forecasts for assigned programs. 5. Responsible for preparing and maintaining schedules at all levels in support of assigned projects/programs.

Additional Functions: 1. Perform other duties as assigned.
Languages Required (in addition to English): English
 
Job Number: 7074
Job Location: Savannah, GA
Rate: 30.00
Per Diem: $110/Weekly, Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/16/2017
Last Updated: 10/23/2017
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineer III

Description:
Quality Assurance Engineer III
Tulsa, OK
Rate: $50

Unique Skills:

Required:10+ years Quality Engineering shop floor experience in an aviation manufacturing environment; ability to interrogate 3D models using Catia V5. Highly preferred: 5+ years experience in composite manufacturing (hand layup and/or Auto Fiber/Tape Laying equipment) and assembly processes. Position will be located in Tulsa OK.


Education and Experience Requirements:

Bachelors degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years quality assurance/control, manufacturing operations and/or military operations experience is required.

Position Purpose:

Performs Quality Assurance Engineering assignments requiring independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria using judgment and ingenuity in making adaptations and modifications. Tasks are performed on medium, moderately complex contracts requiring independent execution within a defined set of skills or knowledge area without help or coaching from others. In working with senior level Quality Assurance Engineers, individuals may be exposed to higher level skills that may require help or coaching from others.

Principal Duties and Responsibilities:

Essential Functions: 1. Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility. 2. Monitors workflow and progress and ensures that standards/expectations are met; assist Coordinators in resolving issues. 3. Interprets and executes company policies and procedures; develops new procedures as required. 4. Develops processes to identify, analyze and correct quality trends. 5. Maintains KPIs for the MRB process to demonstrate process effectiveness and improved efficiency. 6. Promotes, encourages and leads employees towards a continuous improvement culture. 7. Serves as QA customer interface for various oversight activities. 8. Performs Quality Engineering activities using defined software tools and applications such as MiniTab. 9. Proficient in the use of inspection tools and techniques. 10. Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required by the assigned project(s). 11. Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis, etc. 12. Participates in CDRL development, review and delivery to the customer as required by the assigned project(s). 13. Assists in gauging and calibration activities as necessary. 14. Assists in developing fabrication/build processes and standards. 15. Participates in MRB disposition activities. 16. Performs QA estimating for small to medium, less complex projects.

Other Requirements: 1. An Airframe & Powerplant (A&P) License may be used in combination with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement. 2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred. 3. Advanced degree in engineering or related curriculum preferred. 4. Maintain an up to date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques. 5. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5. 6. Ability to define problems, collect data, establish facts, and draw valid conclusions. 7. Aerospace industry experience preferred. 8. Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred. 9. Knowledgeable of manufacturing processes. 10. Lean/Six Sigma certification as a green belt preferred. 11. Excellent communication and interpersonal skills required. 12. Proficient computer skills.
 
Job Number: 7513
Job Location: Tulsa, OK
Rate: $50
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/08/2017
Last Updated: 06/29/2017
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Assurance Engineering III

Description:
UNIQUE SKILLS
Required: 10+ years Quality Engineering shop floor experience in an aviation manufacturing environment; ability to interrogate 3D models using Catia V5. Highly preferred: 5+ years’ experience in composite manufacturing (hand layup and/or Auto Fiber/Tape Laying equipment) and assembly processes. Position will be located in Tulsa OK.

EDUCATION AND EXPERIENCE REQUIREMENTS
Bachelor’s degree in Engineering, aviation sciences, quality systems or related field; or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years quality assurance/control, manufacturing operations and/or military operations experience is required.

POSITION PURPOSE
Performs Quality Assurance Engineering assignments requiring independent evaluation, selection, and application of standard Quality Engineering techniques, procedures, and criteria using judgment and ingenuity in making adaptations and modifications. Tasks are performed on medium, moderately complex contracts requiring independent execution within a defined set of skills or knowledge area without help or coaching from others. In working with senior level Quality Assurance Engineers, individuals may be exposed to higher level skills that may require help or coaching from others.

PRINCIPAL DUTIES AND RESPONSIBILITIES
ESSENTIAL FUNCTIONS
1. Actively identifies and completes process improvement projects related to achieving improved quality or efficiency within their area of responsibility.
2. Monitors workflow and progress and ensures that standards/expectations are met; assist Coordinators in resolving issues.
3. Interprets and executes company policies and procedures; develops new procedures as required.
4. Develops processes to identify, analyze and correct quality trends.
5. Maintains KPIs for the MRB process to demonstrate process effectiveness and improved efficiency.
6. Promotes, encourages and leads employees towards a continuous improvement culture.
7. Serves as QA customer interface for various oversight activities.
8. Performs Quality Engineering activities using defined software tools and applications such as MiniTab.
9. Proficient in the use of inspection tools and techniques.
10. Performs quality planning activities including Quality Plans, QADs and Inspection Plans as required by the assigned project(s).
11. Participates in process improvement activities through monitoring, root cause investigations, auditing, failure analysis, etc.
12. Participates in CDRL development, review and delivery to the customer as required by the assigned project(s).
13. Assists in gauging and calibration activities as necessary.
14. Assists in developing fabrication/build processes and standards.
15. Participates in MRB disposition activities.
16. Performs QA estimating for small to medium, less complex projects.

OTHER REQUIREMENTS
1. An Airframe & Powerplant (A&P) License may be used in combination with 4 years of related experience (in addition to the experience requirements below) in lieu of the degree requirement.
2. ASQ certification (CQE) and/or experience as a FAA recognized airworthiness designee highly preferred.
3. Advanced degree in engineering or related curriculum preferred.
4. Maintain an up to date knowledge in the areas of Quality Assurance, Regulatory Compliance, Design Controls, Risk Management, and Statistical Techniques.
5. Knowledgeable of Geometric Dimensioning & Tolerance (GD&T) ASME Y14.5.
6. Ability to define problems, collect data, establish facts, and draw valid conclusions.
7. Aerospace industry experience preferred.
8. Demonstrated experience and knowledge of FAA regulations, CATIA and Solumina preferred.
9. Knowledgeable of manufacturing processes.
10. Lean/Six Sigma certification as a green belt preferred.
11. Excellent communication and interpersonal skills required.
12. Proficient computer skills.
 
Job Number: 17-732-101061
Job Location: Southeast
Rate: $50.00/per hr.
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 06/23/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Reliability engineer

Description:
MUST HAVE ACTIVE SECRET CLEARANCE TO START.
Duration: 1 Year
Rate: $85.00/hr.
Work week: 9/80
ACTIVE SECRET clearance required to start.
Candidate will be responsible for providing technical leadership in the areas of Reliability, Modeling, and Availability analysis efforts for developmental satellite programs. Applicant must have extensive background in probability and statistics used in performing Reliability analysis; extensive hands-on experience in conducting and managing Reliability.
Candidate will be able to guide / mentor employees performing the following tasks: failure rate/MTBF predictions, Reliability Allocations, modeling and simulations, Probability of Success, and Availability analysis. Candidate will have strong analytical skills, knowledge of wide array of industry tools used to conduct Reliability analysis, ability to prepare and present briefings to senior leadership and external customers, excellent interpersonal and communication skills, excellent skills with Microsoft tools and experience with multiple software analysis tools used in Reliability analysis.
Qualifications
Basic Qualifications:
Bachelor’s degree in a technical field and a minimum of 14 Years with Bachelors in Science; 12 Years with Masters; 9 Years with PhD, in core Probability and Statistics as used in Reliability analysis and activities; capable of obtaining a SCI/SSBI clearance.
Preferred Qualifications:
Bachelor’s degree in technical field (Electrical, Aerospace, Mathematical, or Computer Science disciplines) and a minimum of 16 years of Reliability experience 16 years with a Master’s degree; 9 years with PhD, combining hands-on Reliability analysis and modeling skills for satellite hardware and systems. Currently holds an active SCI/SSBI clearance.
 
Job Number: KMMCDONO
Job Location: Redondo Beach, CA
Rate: 80-100p/h
Per Diem: possible
Overtime: TBD
Duration: 1 year
Start Date: 7/10
Input Date: 06/13/2017
Firm Name: TASC TECHNICAL SERVICES
Attention: Stephen
Address: 73 NEWTON RD
P O BOX 1315

City, State: PLAISTOW, NH 03865
Phone: 603/382-1114
Fax Phone: 603/382-2377
Website: www.tasctech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Buyer/Planner - Aerospace and Defense

Description:
Ingenium Technologies - Los Angeles, CA 91355





Additional Job Postings: http://www.ingeniumtech.com/tech_staffing/



A large military aerospace contractor is currently seeking several Senior Buyer/Planners. These individuals would create, review and maintain valid plans of material and manage the supply base in order to meet customer demand.



Responsibilities will include but not be limited to:

Plans, schedules, releases and manages purchase, interplant orders and work orders as required.

Ensures Government Compliance through out the procurement process

Executes and Manages Non Disclosure Agreements (NDA's)

Formulates Requests for Quotes based on COE Requirements - ensuring flowdown of contractual requirements

Source selection and award of direct or indirect material purchase orders for assigned products

Performs Price analysis for competitive and non-competitive procurements.

Develops and execute strategies for negotiation of purchase order terms: price, delivery, expedites, etc .

Conduct post award supplier management with a strong focus on internal customer support (Message Mgt)

Works with internal and external suppliers to resolve material issues (shortages, emergency customer demands, etc.).

Quotes deliveries for sales requests.

Develops and maintains communication channels between various departments and the

Supply Chain to maintain the flow of materials to support the customer. Reviews, communicates and acts upon anticipated delays.

Reviews anticipated shortage reports for future demands

Reviews, analyzes, and makes changes to supply based on the outcome of monthly S&OP meeting

Maintains and analyzes planning parameters (i.e. Lead times, lot sizes order quantities, safety stock).

Participates in capacity review meetings with internal and external suppliers.

Monitor and maintain inventory levels in alignment with business unit goals.

Participating in CI-/ Lean-projects.



Required Software: WISE/Cincom/SAP, MS Office applications



Required Experience:

5-10 years experience in procurement and planning preferably in the aerospace and defense industry.
Clear understanding of Nondisclosure Agreement Requirements and Proprietary Data

Knowledge of ITAR and EAR requirements

Cost/Price analysis skills required for competitive and non-competitive procurement

Understanding of Government Contracting; including FAR, DFARS and other government regulations

Knowledge of sizing, material planning and production scheduling.

Solid knowledge of WISE/Cincom/SAP, particularly MRP related screens.

Solid knowledge of Manufacturing Resource Planning (MRPII).

Solid knowledge of planning functions/roles.


Required Education:

Bachelor's degree in a related field preferred or equivalent experience.
APICS or CPSM/CPM certification preferred.
Position: Direct Hire, also open to contract/temp



Travel: 20% domestic and international required



Compensation: Exempt, Highly Competitive with Benefits



Location: Los Angeles, CA 91355



Employment Criteria: This position includes access or potential access to ITAR technical data. Therefore, candidates will need to qualify as a US Person which is defined as a US Citizen, a Permanent Resident who does not work for a foreign company/foreign government/foreign governmental agency or organization, or a political asylee in compliance with International Traffic in Arms Regulations.



Employment Statement: Ingenium Technologies is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, age, national origin, disability, veteran status, sexual orientation or any other classification protected by federal, state or local law. Proof of eligibility for employment will be required upon employment.



Due to the requirements of the Customer, No Visa sponsorship is available.
 
Job Number: 92088
Job Location: San Diego, CA
Rate: 30-45/hr
Per Diem: no
Overtime: yes
Duration: 6 mos to Hire
Start Date: ASAP
Input Date: 06/13/2017
Firm Name: INGENIUM TECHNOLOGIES
Attention: Alvin Adeva
Address: 4216 MARAY DR UNIT A1
City, State: ROCKFORD, IL 61107
Phone: 815/399-8803 X255
Fax Phone: 815/399-8804
Website: www.ingeniumtech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Buyers - Dallas, TX

Description:
STS AeroStaff Services is currently hiring Senior Buyers for open positions in Dallas, Texas.

Note: Our staffing services come at no cost to you, the candidate. This is job seeking made simple! For more details, please contact our recruiters at 1-877-707-5767.

Job Duties:

• Demonstrates the highest level of ethics and integrity in all supplier transactions
• Effectively manages supplier and category performance, including development of policies and procedures for each commodity
• Leads negotiations with suppliers, utilizing a strong background in fundamental sourcing skills
• Leads cross-functional Teams for category specific projects delivering significant budgetable savings and efficiencies
• Participates in development and management of policies and procedures around complex commodities
• Negotiates and drafts complex contracts
• Skilled in performing difficult analysis, interpreting results, and providing effective recommendations
• Determines and implements appropriate levers to achieve best price, balancing cost with operational considerations
• Creates and implements project or work plans for assigned categories and holds others accountable to plan
• Researches assigned categories and commodities for new developments
• Leads improvement initiatives
• Seeks out challenges and additional responsibilities

Qualifications:

• Bachelor's degree in business or equivalent experience required
• Enterprise level software procurement experience required
• Strong technology negotiation & contract drafting skills
• Strong organizational and project management skills (identifies activities, sets deadlines, measures progress)
• Customer Service driven / strong relationship building skills
• Displays self-confidence
• Skilled in the use of MS Office Suite
• Strong written and verbal communication skills
• Ability to lead, drive, and adapt to change
• Strong analytical skills and ability to interpret results / ability to identify process improvement opportunities
• Demonstrates sound decision making abilities / focuses on the big picture / thinks strategically
• Takes ownership and accountability
• Ability to resolve conflicts
• Strong project, meeting facilitation, and change management skills
• Positively influences the behavior of others / coaches and mentors others
• Must be able to manage multiple project opportunities simultaneously
• Must be able to deliver effective and convincing presentations
• Develops and manages supplier relationships
• Works with limited supervision
• Interfaces with Legal, Tax, Risk Management, Finance, and others as necessary

Benefits:

STS AeroStaff Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, and if you’re interested in joining the STS Aviation Group family, we encourage you to apply on this page. Have questions? Give us a call at 1-877-707-5767.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 38696
Job Location: Dallas, TX
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: Temp
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: STS AEROSTAFF SERVICES
Attention: STS AeroStaff Services
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineer

Description:
Simulation & Software Engineer
Savannah, GA
Long Term Contract
$58.00-63.00/Hr

Unique Skills:
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace,ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

Job Description
Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 ys in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7079
Job Location: Savannah, GA
Rate: 58.00-63.00/Hr
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 02/22/2017
Last Updated: 02/14/2018
Firm Name: INCONEN CORPORATION
Attention: Brad
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Simulation & Software Engineering Contractor

Description:
UNIQUE SKILLS
1. Matlab/Simulink experience modeling real time aircraft systems
2. Aerospace background with avionics lab testing experience
3. Ability to understand aircraft electrical wiring diagrams as it relates to HIL simulation
4. Experience with high level programming or scripting language such as C/C++, Python
5. Knowledge of data protocols used in aerospace
6. Experience modeling aircraft systems in real time on industry standard simulation platforms (eg NI, Speedgoat, Dspace, ADI)
7. Flight and/or aircraft system lab HIL simulation experience
8. Ability to work independently and self-govern priorities in accordance with lab customer needs

JOB DESCRIPTION
Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description.5 yrs. in specific technical discipline or 10 yrs. broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs. for Masters, 4 yrs. for PhD in fields applicable to this job. Position Purpose: Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services Principal Duties and Responsibilities: Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

ADDITIONAL FUNCTIONS
1. Actively works to improve daily processes and ensures all work meets customer requirements
2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product
3. Performs other duties as assigned

OTHER REQUIREMENTS
1. Advanced degree in engineering related field preferred
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 17-740-92762
Job Location: Southeast
Rate: $58.00 to $63.00/per hour
Per Diem: Split
Overtime: Possible
Duration: 6 mths +
Start Date: ASAP
Input Date: 06/28/2017
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer

Description:
Our client is seeking Software Engineers (multiple positions) to join the Joint Polar Satellite System (JPSS) program and expand our distinguished team to develop a state-of-the-art ground station for the next generation of low earth orbiting environmental satellites. The development of this national asset will provide global coverage, monitor environmental conditions, collect, disseminate and process data about the Earth's weather, atmosphere, oceans, land, and near-space environment.
The Command, Control, and Communications Segment (C3S) software provides a highly automated and integrated suite of nine subsystems at the new NOAA (National Oceanic and Atmospheric Administration) Satellite Operations Facility (NSOF), including Orbit Operations, Mission Management, Command and Control, and Enterprise Management.
The JPSS program is looking for a qualified senior software engineer to join the JPSS Software team as a C3S SW engineer for the C3S Integrated Product Team (IPT).
Typical responsibilities include supporting the design, coding, test, and integration of software. The qualified candidate will be involved with all phases of the software development life cycle including SW requirements analysis, use case support, SW architecture analysis, detailed design, software builds, generating test plans, ensuring code meets requirements through thorough unit testing, updating technical documents, software integration support, problem detection, and resolving discrepancy reports. The qualified candidate will also be responsible for supporting software validation and verification, qualification, configuration control and documentation at the component level.
Additionally, the qualified candidate will be responsible for quickly understanding assignments and carrying them out with moderate supervision. Verbal and written communication skills and problem solving skills will enable the qualified candidate to successfully support Peer Reviews at all phases of the development cycle to ensure successful integration with other software components.

Key responsibilities for the qualified candidate include:
• Object-oriented C++ programming
• Ability to design, develop, and maintain new software functionality
• Ability to work with previously written code and make modifications as necessary
• Ability to work closely with other disciplines (systems and test engineers) to troubleshoot and fix problems
• Enthusiastic and energetic performer able to work in a dynamic, fast paced, and sometimes pressured environment
• Team player incorporating a team based success philosophy
• Contribute to the completion of program and project milestones under the specific guidance of his/her immediate supervisor
• Ability to follow established SW processes and procedures, development, documentation and maintenance/management of operations concepts, requirements (system, element, segment level), external and internal interfaces, and other software engineering work products/artifacts

Requirements:
• United States Citizen
• Minimum 1+ years working experience in object-oriented software design and development using C++
• Software and system-level debugging experience including the ability to identify problems in established code and make modifications as necessary
• Experience with software execution throughout the entire software life cycle (preliminary design through maintenance phases)

Desired Skills:
• Minimum of 2 years experience working with Microsoft Windows OSbased development
• Minimum of 2 years experience with C++
• Experience with code analysis tools such as cppCheck, FindBugs andKlocwork
• Experience with XML
• Experience with Perl
• Experience with Java
• Experience with UML design modeling in modeling tools such as Rational Rose or Rhapsody
• Experience and knowledge related to Satellite Ground Systems and Ground System Operations
• Experience and knowledge related to software discipline process development and deployment
• Experience with customer interaction and end-user engagement
• Experience integrating software (modules, components, subsystems)
• Experience preparing and presenting status information and technical material

Required Education (including Major):
Bachelor of Science, BS in a Math, Science or Engineering related field
 
Job Number: MD38398
Job Location: Riverdale, MD
Rate: $59.00
Input Date: 06/06/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Michael Rodriguez
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer

Description:
The Developer/Analyst II position participates in the development and implementation of business software for the enterprise including coding, testing, documentation, and implementation.

Main Duties and Responsibilities:
Designs, modifies, develops, writes, and implements software programming applications.
Participates in the testing process through test review and analysis, test witnessing, and certification of software.
Works with Business Systems Analysts to ensure program meets defined requirements.
Provides status reports to lead and management as needed.
Required Skills:
Ability to apply knowledge database development utilizing SQL technologies such as SSMS (T-SQL stored procedures).
Healthcare Claims knowledge preferred.
Ability to use Microsoft Access, SQL, Java, VB.NET with Visual Studio is a plus.
Ability to apply knowledge of data warehousing technologies such as Informatica, SSIS.
Ability to demonstrate beginner level understanding of Microsoft Project and PowerPoint.
Ability to multi-task and work under pressure.
Ability to be careful and thorough with detail.
Ability to work both independently and in a collaborative environment.
Ability to communicate both verbally and in writing, fluently in English.
Ability to analyze information and use logic to address work related issues and problems.
Ability to present to a group.

Required Education/ Experience:
Bachelor's degree in related field or equivalent work experience.
3+ (or Master's degree & 1+) years related experience including experience developing and testing a production software system.
 
Job Number: 3177
Job Location: Irvine, CA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 8 month Contract-to-Hire
Start Date: ASAP
Input Date: 05/25/2017
Last Updated: 06/05/2017
Firm Name: OLSA RESOURCES INC
Attention: Dina Matar
Address: 3836 N BALLAST ST
City, State: PORTLAND, OR 97217
Phone: 503/608-7895
Fax Phone: 503/608-7896
Website: www.olsaresources.com

Software Developer

Description:
OOP, C++, Linux, scripting language, secret clearance
 
Job Location: Denver, CO
Input Date: 04/17/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Michael Geil
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Email: mgeil@jsginc.com
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Developer UT

Description:
159504/12566
Title TEMP Software Developer
Layton, UT
45/hr max
6 months

Job Summary General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.

We have an exciting opportunity for a Software Developer to join our Claw team based in Utah.

DUTIES AND RESPONSIBILITIES:
• Windows application development for sensor management software throughout the software life-cycle.
• Programming duties shall include implementing high end user interfaces to control sensors (e.g. EO/IR, radar) and exploit their data for ISR (Intelligence, Surveillance, and Reconnaissance) related programs.
• Candidate should possess strong conceptual understanding of software, development concepts, theory, and operations.
• Should have a solid background in object oriented design and development.
• Will assist in all areas of software development including gathering requirements, designing, coding, testing, fixing, deploying and documenting.
*Job Qualifications
• Typically requires a bachelors or masters degree in computer science, information systems or related discipline and two or more years progressive software development experience with a bachelors degree.
• Experience in developing in Object Oriented Design (OOD) and Development is preferred.
• Experience in working in any of the following technologies is preferred; C#, WPF, UI, IP protocols is preferred.
• Travel to onsite locations to may be required.
• Ability to obtain and maintain a DoD Security Clearance is required.

Qualifications Essential Qualifications Typically requires a bachelors or masters degree in computer science, information systems or related discipline and two or more years progressive software development experience with a bachelors degree. May substitute equivalent experience in lieu of education. Must have a general understanding of software development concepts, principles, and theory and demonstrate the ability to follow and apply the use of programming and analysis concepts. Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment and organize work assignments to meet established timetables. Good communication, computer and interpersonal skills are required to enable an effective interface with other professionals, to produce appropriate documentation, and to present results to a internal audience. The ability to work independently and as part of a team is essential. Must be able to work extended hours as required.
City Layton
State Utah
Travel Percentage Required 0% - 25%
Clearance Required? Desired
Temp Assignment Duration (# of Days) 180
 
Job Number: JE-12566
Job Location: Layton, UT
Rate: 45/hr max
Duration: 6 month contract
Input Date: 06/14/2017
Last Updated: 06/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Software Signal Processing Engineer- Radar, Unix, C++

These positions are for Software Signal Processing Engineers within the Integrated Defense Systems, Electrical Design Directorate, Receiver Exciter and Signal Processing Department. The Receiver, Exciter and Signal Processing Department designs, developer, and integrates a number of different products and technologies relative to radar systems. The Signal Process Technology group within the Receiver, Exciter, and Signal Processing Department focus on state-of-the-art processing technologies and distributed high performance computing architectures that are used to build next-generation Radar Signal Processing applications.

The Software Signal Processing Engineer position is located in Marlboro, Massachusetts, however you may also be able to work in the Tewksbury/ Woburn area. Responsibilities include working within Linux, Unix and Real Time Operating System developing C/C++ implementation of signal processing algorithms and time critical control functions involved in and direct control of sensor systems. This position will also include working closely with Software Architects and Principal Systems, Hardware, and Software engineers to interpret requirements and correctly implement these requirements in software.


Required Skills:
•Minimum of 4 years or relevant experience
•Multithreaded application development experience that includes testing and debugging in C++/C on Linux or Unix environments
•Experience in developing and optimizing algorithms for performance.
•Ability to translate system performance and operation specifications into software requirements, design, and test specifications
•Bachelor's degree in an engineering or scientific discipline.

Desired Skills:
•Direct experience implementing complex signal processing algorithms in C++ meeting latency and throughput performance requirements or experience in implementing complex control operations in software with defined performance timelines
•Working understanding of parallelism and concurrency as applied to algorithm implementation on shared memory and distributed systems
•Experience in multithreaded, multiprocessor software development using pthreads, OpenMP, or MPI programming models on clustered deployments
•Experience developing applications for GPGPU and/or Intel Xeon Phi processors
•Familiar with software configuration management and development process control (i.e. CMMI)
•Experience in using version control tools such as ClearCase
•Continuous integration and test experience in a hardware/software laboratory environment
•Strong communication skills
•Ability to work independently and in a team
•High degree of creativity and ability to solve a wide range of difficult problems
 
Job Number: MA38453
Job Location: Marlborough, MA
Duration: 1 Year
Input Date: 06/21/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Gina Smith
Address: 7310 RITCHIE HWY STE 400
City, State: GLEN BURNIE, MD 21061-3092
800 Phone: 866/277-3343
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
This Software Engineering Senior will design, implement and unit test the MSP Mission Management product.

Individual is responsible for contributing to the software project in all stages of the lifecycle; including but not limited to: performing requirements analysis, software architecture and design, code implementation, unit test, creating and updating software documentation, and supporting integration and delivery activities. Software is implemented primarily in Java, JavaScript, HTML and CSS.

This individual should have strong background in either algorithm development (mathematics background or scheduling algorithm experience) or user experience/user interface design and development.

Experience on agile software development teams is highly desired. Individual shall possess a Bachelor’s degree in engineering, computer science or mathematics with a minimum of five (5) years of experience with Java and/or C++; a working knowledge of a Unix operating system, such as Linux; Agile software development; JavaScript; Hypertex Markup Language (HTML); Cascading Style Sheets (CSS); Java Server Faces (JSF) Java enterprise Edition (Java EE); Mission Management Familiarity with JUnit or other unit test frameworks; familiarity with RESTful web services (JAX-RS), Java Message Services (JMS); and enterprise Java Beans (EJBs).
 
Job Location: Colorado Springs, CO
Input Date: 06/26/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
Primary Responsibilities:
Serve as product owner and resident expert for our JIRA system and accompanying Atlassian components. Provide day-to-day support, administration, maintenance, and enhancement of JIRA for project teams. Create complex custom projects, workflows, schemes, screens, fields, queries, reports, and dashboards. Take the lead in working directly with our cross-functional, agile teams to understand their needs, and provide guidance on what may or may not be possible within JIRA to meet those needs. Test, install, and configure plugins and add-ons to harness the full potential of JIRA, and integrate JIRA with legacy systems and tools. Create documentation including the development of materials for end-user training. Responsible for setting JIRA strategy, maintaining JIRA processes, and studying & selecting plug-ins.

Bachelor's and 9 or more years' experience, Master's with 7 or more years' experience or PhD with 4 or more years' experience. Bachelor, Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.

Local Travel in Southern CA and some occasional travel to NW if needed.
 
Job Number: 26248
Job Location: CA
Rate: open
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: asap
Input Date: 06/07/2017
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Erica Price
Address: WESTRIDGE OFFICE PARK
2646 HIGHWAY 109 STE 207

City, State: WILDWOOD, MO 63040
Phone: 636/438-0312
800 Phone: 866/277-3343
Fax Phone: 636/220-8284
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer

Description:
• Active (DoD) Secret Clearance or the ability to attain one
• Ability to execute upon full software lifecycle
• Strong technical writing skills in support of task documentation
• Communicate and drive to a schedule
• Demonstrates strong working knowledge of C/C++, Java, or C#
• Advanced understanding of OOA/OOD Software Solutions
• Operating system concepts, and computer architecture knowledge
• Familiar with multi-threaded, and IP socket programming techniques
• Practical Knowledge of UML design tools
• Good working knowledge of Microsoft Visual Studio, Eclipse, or NetBeans IDEs
• Strong Understanding of LINUX, Unix-like, and Windows Operating Systems
• GUI software design and development experience
• Master’s Degree or equivalent combination of education and experience and a minimum of 8+ years of experience
• Competent technical expertise and application domain knowledge

Desired Knowledge:

• Knowledge of Software Defined Radios
• Embedded Real Time Software experience
• Familiarity with GPU programming concepts and signal processing
• Familiarity with satellite radio concepts, architecture, and terminology
• Familiarity with Electronic Warfare systems, operations, and concepts
• Familiarity with signal intelligence systems
• DOORS experience
• CMMI Level III experience
• NSA Certification experience
• DO-178B Certification experience
 
Job Location: OH
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 06/06/2017
Firm Name: PANTHER GROUP
Attention: Joseph
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

Software Engineer

Description:
PDS Tech is seeking a Software Engineer in North County.  In your role, you will
  • Develop control algorithms and embedded software implementations using Matlab tools and other IDE's for power products containing input converters/inverters/motor controllers and protection.  
  • Some power converter/motor control embedded hardware development will also be required.  Perform laboratory bench testing of software and hardware designs with special emphasis on waveform interpretation vs design intent. 
  • Perform detailed analysis of motor / inverter data using Matlab. 
  • Develop PC based software for automation, user interface, data collection and data processing/modelling. 

Local candidates preferred.
  • Bachelor’s Degree in Electrical or Computer Engineering
  • Minimum 2 years of experience in Matlab, embedded and PC based software development. Intern experience acceptable. 
  • Strong familiarity with Matlab
  • Some embedded programming experience is required preferably in real-time control applications

Familiarity with lab measurement equipment and techniques especially DSO's
 
Job Number: 1710064388
Job Location: Saint Louis, MO
Duration: 6 months
Input Date: 02/23/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000002GMGNAA4&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer - Level 3 with active secret FL

Description:
159664
Requirement# MFC-REQ-1410
Work location Orlando, FL
Work Week 9/80-A Priority
Needed Date 06/19/2017
End Date 06/18/2018
Number of Resources 1
Security Clearance Active Secret



Type of Service: Engineering
Title: Software Engineer - Level 3
Description
Software engineer with experience in embedded C++ and C software development with Linux operating systems running on multi-core processor in a multi-threaded application. Analyze existing software for reuse and implement complex algorithms. Understanding and modification of kernel software, device drivers, and core thread management desired. Use and development of automated testing desired as well as prior development of safety significant software.
Skill/Experience/Education
Mandatory:

Strong software experience using C++ Objective Oriented Design Skills, Linux Kernel and driver experience, excellent communication and teaming skills
Desired:

Knowledge and/or experience with VxWorks/Workbench experience. QT experience

Max Pay Rate 70.00 USD
Travel No
Non-Exempt
 
Job Number: DW-1410
Job Location: Orlando, FL
Rate: 70/hr max
Duration: 12 month contract
Input Date: 06/14/2017
Last Updated: 06/19/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer 4

Description:
Primary Responsibilities:
Serve as product owner and resident expert for our JIRA system and accompanying Atlassian components. Provide day-to-day support, administration, maintenance, and enhancement of JIRA for project teams. Create complex custom projects, workflows, schemes, screens, fields, queries, reports, and dashboards. Take the lead in working directly with our cross-functional, agile teams to understand their needs, and provide guidance on what may or may not be possible within JIRA to meet those needs. Test, install, and configure plugins and add-ons to harness the full potential of JIRA, and integrate JIRA with legacy systems and tools. Create documentation including the development of materials for end-user training. Responsible for setting JIRA strategy, maintaining JIRA processes, and studying & selecting plug-ins.
 
Job Number: AS 26248
Job Location: Long Beach, CA
Rate: 70.00/hr
Per Diem: NO
Overtime: Possible
Duration: 6 months +
Start Date: 6/16/17
Input Date: 06/07/2017
Firm Name: YOH SERVICES
Attention: Jessalyn McKeown
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II - (MO) - ACTIVE SECRET / NO ACTIVE

Description:
5 OPENINGS NO CLEARANCE REQUIRED
10 OPENINGS ACTIVE CLEARANCE REQUIRED

Assists with the development, documentation and maintenance of architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system. Assists with test procedures and documenting test results to ensure software system requirements are met. Supports software project management and software supplier management functions. Selects, tailors and deploys processes and tools; establishes metrics. Performs software research and trade studies. Troubleshoots software issues. Works under general supervision. The positions are for a variety of different jobs. They are software development, not test, and primarily C/C++. There may be a little Ada/Fortran but not much.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.
 
Job Number: SWIIMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/17/2017
Last Updated: 06/30/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II - (OK) - ACTIVE SECRET

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START

Work will be on the AWACS ground and training systems.
The successful candidate assists with the documentation and maintenance of architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system. Assists with test procedures and documenting test results to ensure software system requirements are met. Gathers information to support software project management. Documents deployed processes and tools and collect metrics. Supports software research and development projects. Troubleshoots basic software issues. Works under close supervision. Special need is in integrating applications onto systems with both Red Hat Linux and Windows Server.

Bachelor's degree and typically 2 or more years' experience in an engineering classification or a Master's degree with experience in an engineering classification. Required: Bachelor or Master degree from an accredited course of study, in engineering.
 
Job Number: SWIIOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 7+ Months
Start Date: ASAP
Input Date: 04/17/2017
Last Updated: 06/19/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer II/III - (OK) - ACTIVE SECRET

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START

The successful candidate develops, documents and maintains architectures, requirements, algorithms, interfaces and designs for software systems. Develops and maintains code and integrates software components into a fully functional software system. Develops software verification plans, test procedures and test environments, executing the test procedures and documenting test results to ensure software system requirements are met. Performs software project management and software supplier management functions. Develops, selects, tailors and deploys software processes, tools and metrics. Executes and documents software research and development projects. Serves as a subject matter expert for software domains, system-specific issues, processes and regulations. Tracks and evaluates software team and supplier performance to ensure product and process conformance to project plans and industry standards. Works under general direction. Knowledge of Red Hat Linux, Windows Server and operating system hardening, desired.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: SWOK
Job Location: Oklahoma City, OK
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 7+ Months
Start Date: ASAP
Input Date: 04/25/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III (10 OPENINGS) - (MO)

Description:
ACTIVE INTERIM SECRET CLEARANCE REQUIRED TO START

Software developer supporting Training Systems products such as pilot training simulators, maintenance training simulators, instructor operator stations, flight environment simulations. Job will entail full software lifecycle development. Many of these programs work in a large scale agile development environment.

Preferred degrees are Computer Science, Computer Engineering, and Electrical Engineering.
Professional experience with C++, C#, and/or Java.
Candidates should have good written and verbal communication skills and the ability and desire to work in a team environment.
 
Job Number: SWMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/03/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III - (MO)

Description:
ACTIVE SECRET CLEARANCE REQUIRED TO START.

F-15 Mission Systems needs experienced software engineers to assist with the development of real-time embedded Mission Computer OFP software. Candidates should have extensive experience in real-time embedded Avionics software development and engineering. This should include requirements analysis, software architecture and design, software implementation, integration, automated test procedure development, lab / flight testing, and problem diagnosis / resolution. Applicants should have experience with modern computer programming techniques and a preference for an Agile software development process. Programming language experience in Ada, C, C++, and Python is needed. Additionally, the position requires the use of COTS software tools ClearCase, ClearQuest, and DOORs. Works under general direction.

Bachelor's degree and typically 5 or more years' experience in an engineering classification or a Master's degree with typically 3 or more years' experience in an engineering classification or a PhD degree with experience in an engineering classification.
 
Job Number: swMO
Job Location: Berkeley, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 12+ Months
Start Date: ASAP
Input Date: 04/03/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer III - (MO) - INTERIM SECRET

Description:
INTERIM SECRET CLEARANCE REQUIRED TO START

Software developer supporting Aircraft Training Systems products such as pilot training simulators, maintenance training simulators, instructor operator stations, flight environment simulations. Job will entail full software lifecycle development. Many of these programs work in a large scale agile development environment.

Preferred degrees are Computer Science, Computer Engineering, and Electrical Engineering.
Professional experience with C++, C#, and/or Java.
Candidates should have good written and verbal communication skills and the ability and desire to work in a team environment.
 
Job Number: SWIIIMO
Job Location: Hazelwood, MO
Rate: OPEN
Per Diem: YES
Overtime: Possible
Duration: 6+ Months
Start Date: ASAP
Input Date: 04/17/2017
Last Updated: 08/14/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Janice Plattner
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineer with active secret UT

Description:
159707
Requirement# AERO-REQ-0495
Work location Odgen, UT
Work Week 9/80
Priority High
Needed Date 04/10/2017
End Date 04/27/2018
Number of Resources 1
Security Clearance Secret
52-60/hr DOE


Title: Software Engineer

Description
Applicant will be the software architect responsible for embedded software definition, design, development and integration to support real-time embedded avionics software projects. The applicant will be responsible for designing, coding, testing and integrating Vehicle Management Systems software.


Mandatory:

Engineering knowledge of C++ application programming, basic wire testing methods, wiring diagram familiarity, Technical Order usage, and process/methodology adherence; Interface with customer personnel is required. Also performs technical planning, research, system integration, verification and validation, documentation, and fielding of program update candidates.
Desired:

Provide engineering expertise to support the development and updates to a piece of Air Force support Equipment. The Multiplex Bus Fault Isolator (MBFI) is support equipment which provides capabilities to trouble shoot and detect faults within the multiplex busses of aircraft. A thorough knowledge of aircraft Multiplex bus communication and 1553/194 standards ; Must work well in Integrated Product Team (IPT) comprised of contract labor, Lockheed Martin, and government civil servants

Skill Matrix
Skill Name Description Level (1-5, 5 being the highest)
1 2 3 4 5 Years Mandatory(Yes/No)

Borland C Builder and C++ Programming Software Coding Languag 0-3 Years
Microsoft Access Programming Programming 0-3 Years
Math and Logic Skills Skills 0-3 Years
Technical Writing Technical Writing 0-3 Years



Interview Required Yes
Shift 1st Shift
Max Bill Rate OT Allowed No
Travel No
Non-Exempt

Rates
0-4 Yrs Pay Rate: 52.00 USD
5-8 Yrs Pay Rate: 56.00 USD
9+ Yrs Pay Rate: 60.00 USD
 
Job Number: JE-0495
Job Location: Ogden, UT
Rate: 52-60/hr max
Duration: 12 month contract
Input Date: 02/23/2018
Last Updated: 02/28/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers with active TS/SCI / 20 openings URGENT CO

Description:
Temp for 6 months then direct hire

We have an URGENT need to for
TS/SCI cleared Software Engineers in Denver (for Special Project)
 
Job Number: CL-001
Job Location: Denver, CO
Rate: open rate
Duration: 6 month contract
Start Date: contract to hire
Input Date: 06/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software and/or Cyber Engineers with Full Scope Poly URGENT VA

Description:
Temp for 6 months then direct hire

We have an URGENT need to for

Full Scope Poly Software and/or Cyber Engineers in Herndon VA. Java, C, C++.

20+ open spots
 
Job Number: CL-002
Job Location: Herndon, VA
Rate: open rate
Duration: 6 month contract
Start Date: contract to hire
Input Date: 06/19/2017
Last Updated: 06/21/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist EVMS / IMS Management

Description:
Specialist EVMS / IMS Management

Location: Jupiter, FL
Pay Rate: $40/hr - $47/hr
Duration: 6 month contract
*Must be a U.S. citizen*

Duties:
-Detailed working knowledge of MS Project, For Project, and MS Excel software.
-Detailed working knowledge of Earned Value Management (EVM).
-Prior experience working with functional areas to establish project task durations, develop predecessor/successor relationships and identify critical paths for Integrated Master Schedule (IMS).
-Knowledge of MS project capabilities to resource loaded tasks in the IMS.
-Ability to export MS Project details to MS Excel for use in other financial or project planning software.
-Detailed understanding of Earned Value Management (EVM) to measure project performance.
-Work with functional organizations to maintain IMS and status EV.
-Develop charts for Program Manager to show project EV metrics as project evolves.

Skills (Required):
-Detailed working knowledge of MS Project, For Project, and MS Excel software.
-Detailed working knowledge of Earned Value Management (EVM).
-Prior experience working with functional areas to establish project task durations, develop predecessor/successor relationships and identify critical paths for Integrated Master Schedule (IMS).
-Knowledge of MS project capabilities to resource loaded tasks in the IMS.
-Ability to export MS Project details to MS Excel for use in other financial or project planning software.
-Detailed understanding of Earned Value Management (EVM) to measure project performance.
-Work with functional organizations to maintain IMS and status EV.
-Develop charts for Program Manager to show project EV metrics as project evolves.

Desired:
-Experience with sales /profit forecasting and financial planning/reporting/analysis.
-Experience with Hyperion financial software.
-Experience with Product Life Cycle Management (PLM) software and Manufacturing Process Management (MPM) software

Education:
-2-4 year degree or equivalent demonstrated experience
 
Job Number: 7435
Job Location: Jupiter, FL
Rate: 40-47
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/15/2017
Last Updated: 06/28/2017
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV

Description:
Specialist Systems Engineer IV

Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
Duration: 6 month contract

** Candidates must have an Active Secret clearance or have had a Secret clearance in the last two years**

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have primarily Hardware experience **

- Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
- Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
- Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
- Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
- Represents the organization in conferences to resolve important questions and to plan and coordinate work.
- May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
- Develops solutions to complex problems which require the use of ingenuity and creativity.
- Work is reviewed at extended intervals for desired results and achievement.
- Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.

-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.
-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.
-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.
-10% - Communicates results in oral presentations and written communication.

Skills:
- Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
- Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).

Education:
- Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
- Advanced degree desirable.
- Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
 
Job Number: 7489
Job Location: Jupiter, FL
Rate: $60.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 06/02/2017
Last Updated: 08/10/2017
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Specialist Systems Engineer IV with active secret / this is a hardware role FL URGENT

Description:
Job Title: Specialist Systems Engineer IV
Job Number: 159587/7218795
Location: Jupiter, FL
68/hr max
6 months
Active Secret to start

Need candidates with Hardware experience. The manager said he is seeing candidates who primarily have software and electrical experience instead of Hardware experience.

Remaining Positions: 2

Duties:
** Candidates must either have a current Secret clearance or have had a Secret clearance in the last two years **



** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


** Candidates must have primarily Hardware experience **

Without appreciable direction and exercising considerable latitude in determining technical objectives and approaches to assignments, performs in a largely independent role for the Systems Engineering organization.
Typical responsibilities include: May plan, conduct, and provide technical Systems Engineering direction on projects or major phases of significant project assignment, coordinating the efforts of technical support staff in the performance of assigned projects.
Requires the use of advanced Systems Engineering techniques in management of requirements and risk for developing rocket propulsion systems.
Assesses the feasibility and soundness of proposed engineering evaluation tests, products or equipment when necessary data are insufficient or confirmation by testing is advisable.
Represents the organization in conferences to resolve important questions and to plan and coordinate work.
May direct, coordinate and review the work of a small staff of engineers and/or technicians; estimates personnel needs and schedules and assigns work to meet completion date. Or, as individual researcher or staff specialist may be assisted on projects by other engineers or technicians.
Develops solutions to complex problems which require the use of ingenuity and creativity.
Work is reviewed at extended intervals for desired results and achievement.
Contacts include interacting with customer personnel on technical matters often requiring coordinated activity across organizational lines.


-60% - Develops hardware and software requirements for rocket propulsion systems product development. Responsible for derivation, allocation, and documentation of requirements in a requirements database. Responsible for the development and maintenance of system, subsystem, and component specifications. Coordinates requirements and related specification change management with IPT members. Defines and coordinates

requirements verification plans with integrated product team members, plans and manages compliance assessment and certification.

-15% - Performs functional analysis in support of requirements development effort. Supports and/or coordinates system trade studies. Coordinates selection of optimized concept baselines through benefit/cost trades in support of definition of system architecture and objectives.

-15% - Coordinates project risk assessment and management and prepares and reports results on mitigation plans.

-10% - Communicates results in oral presentations and written communication.

Skills:
Nine years minimum directly related industry experience in Systems Engineering disciplines (requirements development and management, risk management, and system integration) across the full product development life-cycle for aerospace/rocket propulsion system design and development.
Experience with requirements management software (IBM Rational DOORS, IBM Requisite Pro, etc.).
Must be able to obtain and maintain a U.S. Security Clearance at the appropriate level (requires U.S. Citizenship).
Education:
Bachelor degree in Systems Engineering or appropriate discipline/science (Mechanical/Electrical/Aerospace).
Advanced degree desirable.
Coursework in Systems Engineering (requirements management, risk management, product development cycle) disciplines and rocket propulsion strongly desired.
 
Job Number: MB-7218795
Job Location: Jupiter, FL
Rate: 68/hr max
Duration: 6 month contract
Input Date: 07/25/2017
Last Updated: 08/04/2017
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Hardware Engineer

Description:
Title: Sr Hardware Engineer
Location: Manchester, NH
Duration: 8-month contract

As a highly-motivated, top-notch senior hardware engineer you will have an opportunity to showcase your expertise in specifying, designing, developing, and testing a new hardware solution for our Energy Management Systems business.
With your passion for hardware development, we want to bring you together with like-minded, innovative suppliers, hardware development, software development and manufacturing teams to work collaboratively throughout the product lifecycle.

Required:
Ability to design robust analog and digital circuits for microcontroller and applications-processor based industrial products
Strong debugging skills of complex applications-processor and microcontroller based systems.
In depth experience and high level of skill using Altium Schematic Capture and PCB design in a standards based development environment
Ability to work closely with PCB designers to insure designs meet corporate standards.
Create and execute detailed test plans to insure product meets all marketing and functional requirements
Experience with design simulation tools (LTSpice)
Skilled in designing circuits to meet global EMI emissions and safety standards including strong experience mitigating emissions which exceed specifications. Requirements include meeting Philips corporate emissions limits as well as appropriate agency limits
Deep understanding of isolated and non-isolated RS485 communications in noisy environments
Thorough knowledge of, and strong design experience with, industrial controls interfaces including 0-10V, 0-20mA, 4-20mA, relays, and temperature sensing with thermistors
Experience designing and debugging 10/100 and gigabit Ethernet interfaces. Includes PHY and MAC interfaces, as well as termination, mag selection and EMI management
Experience deigning and debugging low power (?15W) SMPS, including knowledge of isolation and Class 2 requirements
Desired:

Knowledge and experience of Modbus RTU protocol
Experience with building automation and energy management systems
Familiar with FW development and debugging tools as well as ability to write C debugging code to verify proper HW operation
Experience with BACnet MS/TP protocol
Familiar with Modbus/TCP
Experience with FW development and debugging tools as well as ability to write C debugging code to verify proper HW operation
Ability to write/port C based TCP applications using Berkeley sockets
Education and Experience:

BSEE or MSEE
10 years designing and debugging HW in areas identified above.
 
Job Number: JG370482
Job Location: Manchester, NH
Rate: $61.00
Duration: 8 months
Start Date: ASAP
Input Date: 06/13/2017
Firm Name: CDI CORPORATION
Attention: Jason Greer
Address: 17177 PRESTON RD STE 300
City, State: DALLAS, TX 75248
Website: www.cdicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Calibration Technician Lvl 3(physical/Dimensional) in Stennis Space Center, MS & Littleton, CO locations #144993AS

Description:
Recruiter to Contact: Adam Salazar
Job title: Calibration Technician
Job Number: 159547
Location: Littleton, Co
Compensation: DOE
Assignment Length: long term contract
10 Positions Available(please spread the word)

Description:

Calibrate electronic and physical mechanical test and measuring equipment. Calibration to include Commercial and Government Owned equipment with the areas of calibration being determined by equipment backlog Set up calibration stations according to detailed specifications, blue prints, drawings and requirements.

Performs calibration/certifications/verifications of Electronic, Physical and Mechanical test and Measurement Equipment. Duties to include verifications of equipment accuracies by comparison to known standards. Adjustment to the equipment as necessary to meet industry standards for accuracy and customer requirements. Recording and documenting calibration information within a controlled database. Candidate must be able to follow documented processes to perform a combination of manual and automated calibrations utilizing automation software such as Fluke MetCal and Measurements International Software in accordance to calibration procedures and within the Stennis quality system. Candidate must have knowledge of proper adjustment procedures for test and measurement equipment and repair techniques. Candidate must be able to work independently with little assistance.

Required Minimums

Level 2

High School diploma or equivalent experience / combined education with additional specialized technical training equivalent to a technical Associate degree and/or demonstrated ability to perform assigned technical/para-engineering tasks and 3 to 7 years of experience. Required Supervision: General supervision with instructions given for routine work and detailed instruction for new lines of work or special assignments

Level 3

A.S. degree in a technical field or ASQ Calibration technician certification or PMEL training and 5-10 years of experience. Knowledgeable in the use of calibration automation stations and in M&TE troubleshooting and repair methods and techniques

Desired Skills

Basic electronic and Physical Dimensional calibration Experience. Electronic RF Microwave, Physical Dimensional, Flow Calibration experience. Must demonstrate good communications skills, verbal and written as well as solid organization skills.

Security Clearance: None (but ability to obtain a clearance if needed)
 
Job Number: 144993AS
Job Location: Littleton, CO
Rate: Open, DOE
Per Diem: N/A
Duration: 12+ months
Start Date: ASAP
Input Date: 06/01/2017
Last Updated: 07/17/2017
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Oracle Systems Analyst - RM

Description:
JSG is looking for a Sr. Oracle Systems Analyst for our client in Simi Valley, California.

NO H1-B Visa's or Corp to Corp!

The Sr. Oracle Systems Analyst’s role is to work with the company's business stakeholders to plan, design, develop, and launch efficient business and operations systems in support of core organizational functions and business processes. This includes gathering and analyzing information in support of business cases and systems requirements for proposed projects. The Oracle Systems Analyst is responsible for performing the analysis necessary to identify, document, recommend and implement Oracle systems improvements. This individual will apply proven communication, analytical, and problem-solving skills to help maximize the benefit of the company's Oracle systems investments.

Requirements

• Bachelor’s degree in Information Systems preferred.

• Completion of various Oracle certifications/classes a plus.

• APICS certifications a plus.

• Ten plus years related work experience with Oracle EBS ERP systems. (This is a firm requirement.)

• Proven experience in overseeing the design, development, and implementation of Oracle ERP solutions, systems, and Oracle partner system products.

• Extensive experience with Oracle modules ASCP, Inventory, BOM, WIP, Quality, MES, Purchasing, Order Management, Projects Manufacturing, Project Costing and Project Contracts.

• Strong understanding of principles, practices, and procedures in a manufacturing environment.

• Extensive practical knowledge in importing Oracle data for use in report software, BI dashboards spreadsheets, graphs, etc.

• Strong understanding of project management and project portfolio management principles.

• Demonstrated project management skills.

• Conversant with PLSQL a plus.

• Entrepreneurial focus and ability to thrive and excel in a dynamic environment.

• Capability to contribute to strategic planning of Oracle ERP requirements in support of business objectives.

• Understanding of statutory and compliance requirements in a Defense Contractor environment a plus.

• Presently hold or capable of obtaining a U.S. Security Clearance (must be a U.S. citizen / or perhaps a permanent resident really close to getting citizenship).
 
Job Number: 358183
Job Location: Simi Valley, CA
Rate: $120k/yr
Per Diem: no
Overtime: possible
Duration: full time
Start Date: asap
Input Date: 06/16/2017
Firm Name: JOHNSON SERVICE GROUP
Attention: Rich Mardinsen
Address: 950 S BASCOM AVE STE 2122
City, State: SAN JOSE, CA 95128
Phone: 408/728-9510
800 Phone: 866/656-0539
Fax Phone: 408/271-2701
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Systems Administrator

Description:
Senior Systems Administrator - This position is a member of a System Administration team that performs Tier 1 (Help Desk), Tier 2 (escalation) and Tier 3 (subject matter expert) support for a large 24x7 production environment. The position is responsible for installing, configuring and maintaining Linux workstations and servers in support of development and operational system requirements.

Individual will perform installations and upgrades to UNIX operating systems and maintain them in accordance with established policies, procedures and agreements. Additionally, this individual will ensure Linux workstations and server data integrity by auditing, evaluating and implementing, and managing appropriate software solutions.

Individual will monitors system backups and database archive operations; write and administer scripts for the gathering of automated system metrics; perform operational system help desk responsibilities; and providing quick, responsive solutions to development and operational issues and concerns.

This individual plans COTS SW and HW upgrades to meet program milestones and coordinates with other functional groups on system upgrades and the integration of new capabilities. Specific duties include, but are not limited to: execution of system transition procedures; support integration and planning standards and custom operational procedures as well as future deliveries and systems; work off of system anomalies and support of off hour testing, as required.

After-hours response to a pager is periodically required. Working some non-standard shifts will be required to support periodic system tests, baseline promotions, and other mission critical activities.

This individual will be required to meet the Government required Information Assurance Workforce Enhancement Program requirements, and at a minimum the Security+ Certification at the time of employment. This individual is subject to a government security investigation and must meet eligibility requirement s for access to classified information.

Specific qualifications this individual must meet are: a mastery of AIX 7.x, RHEL 7.x Operating systems in systems; must have a professional knowledge/experience of IBM DS5000, HP 3PAR 7000 and HP 3PAR 8400 SAN architecture, assembly, configuration, maintenance and support; must have a working knowledge/experience of IBM TS4500 and IBM 3584 Tape libraries architecture, assembly, configuration, maintenance and support; must possess a complete mastery of IBM TSM installation, configuration, maintenance and troubleshooting support; individual must have a working knowledge/experience of C7000 blade server, HP DL series, and HP Synergy 12000 blade server infrastructure architecture, assembly, configuration, maintenance and support.
 
Job Location: Aurora, CO
Input Date: 06/15/2017
Firm Name: GLOBAL CONTRACT PROFESSIONALS
Attention: GCP Recruiter
Address: P O BOX 161127
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Technical Writer

Description:
Sr. Technical Writer should have extensive experience developing new and making revisions to Instructions for Continued Airworthiness (ICA) procedures. Experience should include, but not limited to, on-aircraft field level maintenance and inspection procedures, wire diagram and/or standard wire practice manual content from supplier and engineering data. Experience with ENOVIA SmarTeam or similar Product Lifecycle Management (PLM) database products strong desire. Familiarization with CATIA three-dimensional (3D) modeling and two-dimensional (2D) CAD standards, format, and 3D/2D software products

Bachelor’s degree or equivalent experience in the authoring of technical publications. Four (4) years of Technical Publications writing experience. Advanced knowledge of all aircraft systems methodology. See Other Requirements in Job Description.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/31/2017
Last Updated: 09/15/2017
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Structural Design Engineer

Description:
PDS Tech is seeking a Structural Design Engineer in St. Louis, MO


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • Must have active secret clearance or active within the last 2 years
  • Composite experience 

Email resumes to gsanchez@pdstech.com or call 314-264-3135 to discuss. 
 
Job Number: 1610051299
Job Location: Hazelwood, MO
Duration: 12 months
Input Date: 06/07/2017
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydebAAA&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051184
Job Location: San Diego, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLfAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required. 
  • Composite experience 

 
Job Number: 1610051183
Job Location: Palmdale, CA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLaAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051181
Job Location: Grand Prairie, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLQAAY&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051188
Job Location: Warner Robins, GA
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLzAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US.
 Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051186
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLpAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  

An active Secret Clearance is required.  Flexible and part-time schedules will be considered.

Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as required.

Required: 

  • An active Secret Clearance is required.  
  • Composite experience 

 
Job Number: 1610051187
Job Location: Greenville, TX
Duration: 12 months
Input Date: 06/10/2016
Last Updated: 06/15/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Gus Sanchez
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Email: cecjstlouis@pdstech.com
Website: http://jobs.pdstech.com/job-detail?id=a1i50000001ydLuAAI&URLSource=cjhunter

Structural Design Engineer

Description:
PDS Tech is seeking Structural Design Engineers for openings in the St. Louis, MO area and other locations across the US. 
Locations vary. Please contact a recruiter to determine currently open and upcoming locations.  
An active Secret Clearance is required.  Flexible and part-time schedules will be considered.


Provide engineering data, instructions, documents (drawings, reports, etc.) and technical support required for fabrication and installation of aircraft structural components.  Must be able to perform the research required for completion of task assignments (with minimal guidance from the Lead engineers). 
  • Develop design data for aircraft structural components, systems components, assemblies and installations.
  • Complete assignments within scheduled milestones.
  • Provide technical assistance to fabrication shops, production, quality assurance and other departments in interpretation and implementation of design data.
  • Mentor associate structural engineers.
  • Actively works to improve daily processes.
  • Maintains a current knowledge of developments in aircraft structures.
  • Participates in projects to improve productivity and financial performance.
  • Perform other job duties as assigned.


 
 

Qualifications: 
  • Bachelors Degree in Aerospace, Aeronautical, Civil, Mechanical or Manufacturing Engineering or equivalent training and experience. 
  • Minimum 8 years engineering experience.
  • Proficient in NX Unigraphics or other similar 3D solid modeling software (such as: CATIA V5 or AutoCAD 2000). 
  • Experience with Team Center & Enovia is a plus. 
  • Attention to detail of completed designs is critical.  Ability to work with cross functional teams required.
  • Proficient at producing high quality designs within schedule and budget.
  • Must be able to work in team environment.
  • Must be able to work overtime and weekends as requi