Job Search Results

204 listings were found that matched your search words: Keywords: CAD ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2018/11/16 Friday 08:43AM Pacific Time by ContractJobHunter. )

Listings 1 - 204

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2442 - MECHANICAL ENGINEERS - cv, word doc only

Description:
Our client is currently seeking Engineers to fill positions at their Northeastern US facility for:

Mechanical engineers currently to support a number of programs across the Space Mission organization

Candidates will possess a Bachelor degree from a recognized university, in Mechanical Engineering or equivalent, and a minimum of 4 years of post graduate professional experience.

(Previous Aerospace experience and familiarity with MIL/ASME standards and ISO are a definite asset.)

Ability to interface with customers on a daily basis will be a key asset for this position.

Experience with CAD, preferably 3D is also an asset.

Must have solid oral presentation skills, as well as written communication skills.
 
Job Number: 2442
Job Location: Northeastern US, Northeastern US
Rate: 105.00 US
Per Diem: TBD
Overtime: TBD
Duration: 24+ Mths
Start Date: ASAP
Input Date: 07/27/2018
Last Updated: 08/29/2018
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 3924 CHESSWOOD DR
City, State: TORONTO, ON M3J 2W6
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

CAD Drafter / Designer

Description:

PDS Tech, Inc. is seeking a CAD Drafter / Designer for an open position in Jacksonville, FL. 
The ideal candidate will perform mid to high level complexity drafting and design of Assembly level CAD Drawings


Must be proficient with SolidWorks CAD software including:
  • 3D modeling
  • Creation of Drawings
  • Geometric Dimensioning & Tolerancing.

Education Associates Degree
 
 
Job Number: 1810085016
Job Location: Jacksonville, FL
Per Diem: No
Duration: 6 months
Input Date: 04/30/2018
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mOFxAAM&URLSource=cjhunter

CAD Systems Administrator or CAD Technical Support

Description:

 
Input Date: 01/14/2015
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: kpotter@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CNC Programmer

Description:
We are recruiting for a motivated CNC Programmer for this Aerospace Company to set-up, and operate manual and CNC machines to produce tight tolerance components and tooling while reducing run times.

The ideal candidates must be motivated in the programming and setup of CNC machines in a high-mix, low-volume environment requiring quick turnaround manufacturing runs and on-the-job problem solving to ensure machine spindles are operating most of the shift.

Successful candidates will bring a broad array of skills to help grow the company and the position itself.

RESPONSIBILITIES
Model Parts in Solidworks
Program Parts in Mastercam
Defines Manufacturing Plans
Designs Tooling
Generates Set-Up Sheets
1st Run Set-Up and Part Part Validation
Assistance with First Article Inspections
Reports to the General Manager (Dotted-line to Sr. Programmer or Manufacturing Manager)
Completes Projects Accurately by Deadline
Understands the Material properties of hard and soft alloys

REQUIREMENTS
Min. 3 Years Experience with CAD (Solidworks) and CAM (Mastercam)
High Print to Part Aptitude (in understanding the complete manufacturing process, from Programming to Final Part Inspection)
Min. 3 Years Experience Operating Multi-Axis CNC and Manual Mills (Horizontal Preferred)
Productive, Turns New Programs Quickly
Fast and Efficient in Demanding Customer Environment
Ability to lift over 25 lbs
Excellent mechanical skills and aptitude
Positive, Collaborative, Industrious
Expert in Speed/Feed/Material Properties
 
Job Location: Kent, WA
Input Date: 04/27/2018
Last Updated: 06/23/2018
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
Work with systems engineers to define whole vehicle pin-level interconnect
Work with physical architects to define harness routing scheme
Develop vehicle harness designs
Work with CAD designers to route vehicle harnesses
Collaborate with CAD designers on harness drawing release
Collaborate with CAD designers on drawing release for electrical installations, interconnects, and elementary wiring diagrams

Bachelors degree in Electrical Engineering with a minimum of 3-5 years of post graduate work required.
Ability to lead multi-engineer projects and balance cost/schedule/technical priorities
Occasional overtime, and weekend hours may be required to complete critical tasks.
Strong interpersonal skills and ability to work with interdisciplinary teams.
Strong multi-tasking skills
Experience with Mentor Graphics Capital desirable
Experience with Pro-E Creo desirable
Experience with NX desirable
Must be able to obtain a security clearance if necessary.
 
Job Number: 42342
Job Location: Sterling Heights, MI
Rate: Open
Per Diem: Yes
Input Date: 06/04/2018
Firm Name: PANTHER GROUP
Attention: John Sabbagh
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer - Level 4

Description:
Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Duration: 6 month contract


** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **


Duties:
** Candidates must have significant experience with Creo and GD&T (Geometric Dimensioning & Tolerencing). Windchill experience strongly preferred.

** 10 years minimum of related experience as technical Design Engineer in rocket propulsion hardware or equivalent, and 10 years minimum of related experience as technical Designer using ProE/Creo CAD systems **

** Knowledge in the design of high pressure cryogenic, ambient and high temperature rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware is preferred **

Design Engineer - Must be able to create or modify designs of liquid rocket propulsion hardware associated to high pressure and high temperature static structures, combustion systems and high pressure valve systems.

- Responsible for designing, developing and testing products including providing project time and cost estimate, product manufacturing and evaluation product for quality safety and cost.
- Applies research to the planning design, development and testing of rocket chambers, nozzles, gas generators, igniters, injectors, valves, actuators and other associated rocket engine hardware.
- Applies theories of heat and energy transfer to create practical solutions to technical problems
- Responsible for damage tolerance, durability, design modeling, coordination with analysis disciplines.
- Majority of work will be to develop and maintain component and assembly layouts, designs/CAD models, and drawings using Creo2 graphics system for liquid engine hardware.

Activities: conceptual design creation, design layouts, GD&T application, tolerance analysis, systems design and integration, fabrication process identification, synthesis of higher level requirements to component level requirements. Conduct trade studies and develop schedules, test plans, component specifications and procedures.


Skills:
- Candidates must have significant experience with Creo & GD&T. Higher level certifications are preferred.
- Winchill experience strongly preferred.
- Mechanical Design and development Engineers research, develop, analyze, design, and support fabrication of components using engineering and scientific principles.
- Engineers are also required to analyze and verify product design and performance for adequacy and reliability.
- Support or lead investigation and resolution of hardware and process anomalies and issues identified by preventative action/corrective action boards and/or safety initiative activities.
- Must be able to interface well with other members of project or program team, management, and technical staff to define and implement engineering solutions to meet group, organization, and company objectives.
- Must be able to prepare and make presentations at both internal and customer design reviews.


Education:
- BS degree in an Engineering field or equivalent field. MS degree is desired.
 
Job Number: 8574
Job Location: Canoga Park, CA
Rate: $50.00 - $60.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 6 mos
Input Date: 03/12/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer

Description:
* Looking for someone with SolidWorks Composer software exp (it’s a CAD Model animation software package)
* Although the emphasis is Mechanical Design, the ideal candidate should have some exposure to electrical design drawings as well.

Summary

The Designer will prepare rough sketches, with a focus on Mechanical Design and Drafting, by studying customer specifications and creating a picture of the system, components and/or parts to support sales and marketing.

Duties / Responsibilities:
> Applies standard design practices through the use of welding, machining, manufacturing and assembly drawing symbols, descriptions and call outs.
> Prepares final drawings by studying engineering sketches, specifications and supporting documents.
> Develops layouts of the system, sub-systems, and parts; identifying dimensions, angles, curvatures, tolerances and materials
> Maintains engineering data base by entering data and completing backups.
> Mechanical design of enclosures, test fixtures and detailed electronics packages utilizing SolidWorks modeling software; design components for various fabrication processes including milling, turning, injection molding and sheet metal forming.
> Creates designs with appropriate dimensions, tolerances and part finishes while considering manufacturing technology; generates fabrication/assembly drawings of components & assemblies using ASME Y14.5 standards
> Reverse engineer complex components and assemblies; contributes to team effort by accomplishing related tasks as needed.
> Develop / design of fabrication & assembly drawings of system components/assemblies
> Resolve discrepancies by collecting and analyzing information, conferring with engineers, vendors, technicians and clients
> Identify & verify specifications by examining engineering docs & performing calculations

Job Requirements / Experience:
> 7+ years’ work experience in computer aided drafting with an Associate’s Degree in Mechanical Design or equivalent technical school training; U.S. Citizen is required
> 3-D modeling, SolidWorks (preferred)
> Experience in mechanical design and layout preferably in specialized packaging solutions
> Must have good mathematical background to handle common calculations
> Experience with machine processes, mechanical fabrication, materials and assembly processes a plus
 
Job Number: 023_2018
Job Location: Elkridge, MD
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: Long-Term / Temp-to-Perm
Start Date: ASAP
Input Date: 10/15/2018
Last Updated: 10/16/2018
Firm Name: GLOBAL AMERICAN STAFFING
Attention: Mark A Ludwig
Address: 12 HARDING ST STE 204-205
City, State: LAKEVILLE, MA 02347
Phone: 508/230-5030
800 Phone: 800/510-8050
Fax Phone: 508/923-0005
Website: www.globalamericanstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Jacksonville, FL
Duration: 6 month contract
Pay Rate: $39.00/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****

Job Description:
- Performs mid to high level complexity drafting and design of assembly level CAD and Drawings.
- Must be proficient with SolidWorks CAD software including 3D modeling and drawing creation.
- Must have a thorough understanding of ASME Drawing Standards including ASME Y14.5 Dimensioning and Tolerancing (GD&T).
- The applicant will be expected to be capable of generating as well as self-checking full drawing packages including complete dimensioning callouts to meet engineering and design requirements.
- Experience with designing for or manufacturing molded products and associated tooling is a plus.

Requirements:
- Associates Degree
- U.S. Citizen
- 15 – 20 years of experience
 
Job Number: 9133
Job Location: Jacksonville, FL
Rate: $39.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/15/2018
Last Updated: 06/26/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer/Drafter

Description:
Location: Jacksonville, FL
Duration: 6 Month Contract
Pay Rate: $29.25/HR
Shift: 1st Shift
Per Diem Split: No

****MUST be a U.S. Citizen****

Description:
-Performs mid level complexity drafting and design of assembly drawings and CAD models using SolidWorks.
-Applies GD&T.

Requirements:
-Solidworks experience
-GD&T
-Associates degree or higher required
 
Job Number: 9034
Job Location: Jacksonville, FL
Rate: $29.25/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 05/14/2018
Last Updated: 08/14/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Digital Design Engineer

Description:
Job Description:


  • Client is seeking an individual with specialized skills in digital design tools with a firm background in computer operating systems and processes necessary to develop Client and unique digital circuit blocks and apply advanced algorithms in next generation silicon processes.

  • Primary job functions will include system administration, installation, and maintenance of an advanced circuit design environment consisting of commercial- and government- developed electronic design software.

  • Other duties may include supporting analog and RF design, developing standard cell libraries, and testing fabricated chipsets.

  • The selected candidate will represent our Client and DoD customers in outside discussions and technical forums.

  • This position will require some travel and require a security clearance.




Required Skills & Experience


  • A BS Degree in Electrical/Electronic Engineering or Computer Science with five (5) years of experience is required.

  • The applicant must be familiar with the Red Hat enterprise operating system or comparable Linux distributions, installation, maintenance, port security, backup, and shell scripting.

  • Familiarity with installation and maintenance of the advanced Cadence Design Systems IC design flow, Synopsys, and Mentor Graphics tools is required.

  • The applicant must be capable of debugging and troubleshooting electronic design tool installation/maintenance and interaction with 3rd party tools and process design kits.

  • Experience in deriving verification test benches from detailed specifications is required.

  • Familiarity with at least one (1) commercial scripting programming language such as

  • PERL or Python is required.




Desired Skills and Experience

Additional experience in digital circuit design is desired, including: Verilog/VHDL behavioral modeling, Digital IC design for manufacturing (JTAG insertion, test vector generation, Built-In Self-Test), an understanding of physical design issues including layout, familiarity with memory compilers, Cadence Skill code development, and fundamentals of Process Design Kits (PDKs).



Special Requirements/ Certifications:

Must be US citizen and eligible for security clearance. The National Agency Check with Inquiries (NACI) is a background investigation primarily for federal employees who will not have access to classified information. DoD clearance is not required.

Opportunity for contract-to-hire based on worker performance, worker attendance and dependability and client business needs
 
Job Number: 18-12267
Job Location: Dayton, OH
Rate: 0.0USD/Hour
Per Diem: SPLIT
Overtime: Possible
Duration: 2018-08-10 00:00:00.0
Start Date: 2018-05-13 00:00:00.0
Input Date: 03/27/2018
Last Updated: 11/16/2018
Firm Name: NESCO RESOURCE
Attention: Cody Grimes
Address: 101 COMMERCE ST STE 3001
City, State: LAKE MARY, FL 32746
Phone: 407/710-8000
Fax Phone: 407/710-8001
Email: cjhunter.nesco@jobdivaemail.com
Website: www.nescoresource.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Draftsman

Description:
Description
The Engineering Drafter will provide engineering support by performing a variety of product definition duties using CAD tools (AutoCAD & Solidworks) including layout sketches, notes, diagrams, CAD modeling and associative engineering CAD drawings, engineering documentation and reports in accordance with company policies and standards.

Requirements
REQUIREMENTS



· Strong working knowledge of Solid Works and/or AutoCad


· Basic geometric dimensioning and tolerancing (GD&T) and ability to perform tolerance stacks


· Engineering drawings/modeling and related specifications


· Mechanical drafting and design methods, techniques and procedures


· Mathematics, including algebra and trigonometry


· Perform mathematical calculations in area of assignment which may include positional tolerance (ANSI Y14.5), stress, gauging and other types of engineering analysis


· Interpret and follow verbal and written instructions


· Communicate effectively, both verbally and in writing


· Read and interpret drawings, schematics and related specifications


· Effectively interface with all levels of personnel and work in a team environment


· Effectively estimate, schedule and prioritize work flow


· Understand specifications and shop drawings
 
Job Number: DRAFT
Job Location: Carlstadt, NJ
Rate: OPEN DOE
Duration: LONG TERM CONTRACT
Start Date: ASAP
Input Date: 06/05/2018
Last Updated: 06/18/2018
Firm Name: MIDCOM CORPORATION
Attention: Maurice Bradford
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics Engineer

Description:
JOB SUMMARY:
Principal responsibilities include design and integration of aircraft avionics and electrical systems for modifications.
JOB RESPONSIBILITIES:
• Prepare engineering drawings for avionics and electrical system interface wiring using computer based drafting tools (CATIA/CCD, Mentor Graphics and/or IAI HarnesSys)
• Utilize electronic test equipment to verify avionics and electrical systems meet design requirements, and/or for system troubleshooting in the lab and on aircraft
• Prepare engineering trade studies, functional test procedures, certification plans, ground and flight test plans, certification reports, and other engineering documents
• Write technical descriptions of subject matter pertinent to design or test requirements. Includes descriptions of supplier parts, test or rigging specifications, etc.
• Assist with the evaluation and analysis of avionics and electrical system design for completion of function hazard assessments and system safety assessments.
• Assist with the development, design, testing and certification documentation for new or modified printed circuit board modules for aircraft
EDUCATION/ EXPERIENCE:
• At least 2 years of related experience
• Bachelor’s Degree (or equivalent industry experience) in: Electrical Engineering, Computer Engineering or Electrical/Electronic Engineering Technology, or related technical degree.
• Electronic drafting experience with CATIA-CADAM Drafting (CCD), Mentor Graphics and/or IAI HarnesSys desired.
• C/C++ and assembly programming experience or coursework desired.
• Design knowledge of electrical bonding criteria, thermal cooling requirements for electronic equipment, EMI shielding, and High Intensity Radiated Fields (HIRF) / Indirect Effects of Lightning (IEL) installation criteria is considered a plus.
• Experience with avionics and electrical system design to the requirements of CFR 14 Parts 23 & 25 is desired.
• Experience with 3D modeling and drafting using CATIA V5 file based/Enovia and/or CATIA V6/Enovia is beneficial.
 
Job Number: 87958
Job Location: multiple
Rate: open
Per Diem: possible
Overtime: possible
Duration: Long Term
Start Date: ASAP
Input Date: 07/25/2018
Last Updated: 11/16/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Our client, a market leader and technology innovator, is seeking talented professionals to deliver cutting edge solutions to their customers. Well-respected, with a global presence, our client consistently offers a powerful and robust portfolio of products, services and solutions that help customers successfully execute their missions in today’s dynamic environment. With unsurpassed engineering, using an open systems approach, our client solves the nation’s most complex challenges while foreseeing future needs.

Electrical Engineer
(US Citizenship Required*)
Florham Park, NJ
2018-6145

Responsibilities:
• Participate in electrical requirements analysis, functional analysis, performance analysis (timing, power, etc.), design, integration, and verification of electrical components, equipment & systems
• Apply principles and techniques of Electrical Engineering
• Perform electrical engineering root cause analysis for electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
• Participate in internal electrical reviews of electrical components, equipment and systems
• Evaluate vendor capability to support product development
• Apply basic understanding of the organizationally defined electrical processes used throughout the lifecycle of the program or project
• Support generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle
• Participate in selection of components and equipment based on analysis of requirements

Qualifications:
• Required – able to obtain TS/SCI with polygraph
• Working knowledge of electrical engineering concepts, principles, theories, and processes
• Use of electrical engineering CAD tools
• Working knowledge in Microsoft Office applications
• Working knowledge in electrical engineering design tools
• Good written and verbal communications skills
*US Citizenship is required by law, regulation, executive order, or government contract.

Education and Experience:
• Bachelor’s degree in Electrical Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 2 years of relevant experience; or Master's Degree.

Conditions of Employment:
Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

About Our Company:
Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

Join a team that values your experience!
 
Job Number: 2018-6145
Job Location: Florham Park, NJ
Rate: Based on experience
Duration: 12 Months
Input Date: 06/08/2018
Firm Name: MOSELEY TECHNICAL SERVICES INC
Attention: Aaron Burrows
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Ability to obtain a Department of Defense TS/SCI with Polygraph security clearance

Participates in electrical requirements analysis, functional analysis, performance analysis (e.g. timing, power, etc.), design, integration and verification of electrical components, equipment and systems
Applies principles and techniques of Electrical Engineering
Performs electrical engineering root cause analysis for electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
Participates in internal electrical reviews of electrical components, equipment and systems
Evaluates vendor capability to support product development
Applies a basic understanding of the organizationally defined electrical processes used throughout the lifecycle of the program or project
Supports the generation of technical engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle
Participates in the selection of components and equipment based on analysis of requirements

Working knowledge of electrical engineering concepts, principles, and theories
Working knowledge of electrical engineering processes
Use of electrical engineering CAD tools
Working knowledge in Microsoft Office applications
Working knowledge in electrical engineering design tools
Good written and verbal communications skills
 
Job Number: 42363
Job Location: NJ
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/07/2018
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer AAP

Description:
• Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services

Unique Skills:
• Wiring diagram creation, Wire harness creation, Wire installation drawing creation. Competent in circuit design, voltage, shielding.
• Able to coordinated vendors, manufacturing and other engineering personnel in development and testing to resolve problems. Usage of Auto cad and Catia V5. CHS is a plus but not required.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
• Languages Required (in addition to English): None

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job
 
Job Number: 24-235
Job Location: Savannah, GA
Rate: $62-$67
Per Diem: yes
Overtime: yes
Duration: 1 year plus
Start Date: ASAP
Input Date: 03/20/2018
Last Updated: 06/22/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 05/29/2018
Last Updated: 11/16/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: davellino@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineer Design Structures - 4 with active secret / Catia V5 or NX Fibersim CA

Description:
161724/1647

Engineer Design Structures - 4 (Job Number: 18007467)

Number of Openings: 1

Location(s): United States-California-Palmdale


Shift: 1st Shift

Target Start Date: Jun 4, 2018

Target End Date: May 3, 2019

Pay Rate: $65-$70/hr

Location: Palmdale, CA

Work Week: 9/80A

Duration: 1 year

The successful candidate will be responsible for new conceptual layouts, detailed engineering designs of metallics and composites, modifications, integration of advanced technologies, BTP/PDP releases, and performing technical reviews.

The candidate is expected to be thoroughly versed for primary Structural Design and GD&T. CATIA V5 and/or NX experience is required. FiberSIM experience strongly preferred.


Basic Qualifications:

9 Years with Bachelors in Science; 7 Years with Masters; 4 Years with PhD
from accredited institution
• Experience with Geometric, Dimensioning and Tolerancing (GD&T).
• Knowledge of F-35 tools and processes.
• Experience with BTP development, applicable notes, BOM, sign-off process.
• Experience with CPLM, Teamcenter, FiberSIM, CATIA V5 and/or NX-CAD.


Preferred Qualifications:
• Master’s Degree or PhD in ME, AE or Civil Eng (Structures) Design emphasis.
• Expert knowledge of Geometric, Dimensioning and Tolerancing (GD&T).
• Demonstrated affordability approaches in structural designs, including integration of platform build sequences and designing for manufacturing.
• Minimum 5 years of aircraft/spacecraft design experience, including clean sheet airframe layout, detailed drawing releases, and supporting build.
• The ability to obtain a DoD Top Secret clearance.
• Team player and demonstrated exceptional collaboration
 
Job Number: MB-1647
Job Location: Palmdale, CA
Rate: 65-70/hr DOE
Per Diem: no
Duration: 1 year
Start Date: 9/80
Input Date: 06/28/2018
Last Updated: 06/29/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Drafter(Solidworks/AutoCAD/GD&T) position in Carlstadt, NJ

Description:
Recruiter to contact: Adam Salazar
Job Title: Engineering Drafter
Location: Carlstadt, NJ
Compensation: DOE
Assignment Length: Contract (Open Ended)

JOB DESCRIPTION:

Position Summary:

The Engineering Drafter will provide engineering support by performing a variety of product definition duties using CAD tools (AutoCAD & Solidworks) including layout sketches, notes, diagrams, CAD modeling and associative engineering CAD drawings, engineering documentation and reports in accordance with company policies and standards.
REQUIREMENTS
• Strong working knowledge of Solid Works and/or AutoCad
• Basic geometric dimensioning and tolerancing (GD&T) and ability to perform tolerance stacks
• Engineering drawings/modeling and related specifications
• Mechanical drafting and design methods, techniques and procedures
• Mathematics, including algebra and trigonometry
• Perform mathematical calculations in area of assignment which may include positional tolerance (ANSI Y14.5), stress, gauging and other types of engineering analysis
• Interpret and follow verbal and written instructions
• Communicate effectively, both verbally and in writing
• Read and interpret drawings, schematics and related specifications
• Effectively interface with all levels of personnel and work in a team environment
• Effectively estimate, schedule and prioritize work flow
• Understand specifications and shop drawings
 
Job Number: TBD
Job Location: Carlstadt, NJ
Rate: DOE
Per Diem: N/A
Overtime: N/A
Duration: Open ended Contract
Start Date: ASAP
Input Date: 06/04/2018
Last Updated: 06/14/2018
Firm Name: MIDCOM CORPORATION
Attention: Adam Salazar
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA & ASIC Design/Verification Engineer

Description:

USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Description



  • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

  • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


    • Requirements: management

    • System/Mechanical design, modeling, analysis, and review

    • Test/verification planning, development, and execution,

    • Occasional customer interface, coordination, and communication, and

    • Coordination with manufacturing operations.



 


Qualifications:



  • Proficiency in using DOORS software for Requirements capture and management is a plus.

  • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

  • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


 


Education:



  • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


 

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




 













Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems





 
Job Number: R13869
Job Location: Cedar Rapids, IA
Rate: 65-75
Per Diem: Yes, Split
Overtime: Some
Duration: 24 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4

Description:
Location: Canoga Park, CA
Rate: DOE
Duration: 6+ month contract

** Candidates must be U.S. Citizens **
** Permanent residents are NOT eligible for this role **
** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **

** Candidates must be able to obtain a Secret Clearance **
** Looking for candidates with Liquid Propulsion Project Engineering experience **
** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **


Duties:
This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:
- Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
- Conceive and plan projects involving conventional and the development of new methods to attain program objectives
- Provide direction in problem investigations and resolution across functional areas
- Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
- Prepare technical and design requirements in support of project goals
- Keep current in relevant technologies and methods in support of project assignments
- May provide technical guidance to less senior project engineers and project support personnel


Skills:
**Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years**
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.
15% - Monitor technical progress and interface with Program Management, company customers, and other company functional organizations to understand and develop resolution to program technical issues.
10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.
5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.
5% - Provide inputs to written and verbal status reports to Engineering lead, company Management, and provide input and leadership at product team meetings.


Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.
-CAD knowledge is desirable.
-Working knowledge of Microsoft Office software is required.
 
Job Number: 8986
Job Location: Canoga Park, CA
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6+ mos
Start Date: ASAP
Input Date: 09/12/2018
Last Updated: 10/01/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Liquid Propulsion Project Engineer - Level 3 / Level 4 with active secret CA

Description:
Job Title: Liquid Propulsion Project Engineer - Level 3 / Level 4

Number of Positions: 2

Remaining Positions: 2


Duties:

Additional Information: CANDIDATES NEEDED! Manager is active. Active Secret clearance required or active within last 2 years.

** Candidates must be U.S. Citizens **

** Permanent residents are NOT eligible for this role **

** Dual citizens are NOT eligible for this role. Also, candidates with a current non-U.S. passport in addition to a U.S. passport are NOT acceptable **



** Candidates must have an active Secret clearance or have had an active Secret clearance within the last two years **



** Looking for candidates with Liquid Propulsion Project Engineering experience **



** Level 3 candidates will have 3 to 6 years of experience. Level 4 candidates will have 7+ years of experience **





This role will work on the development, fabrication and test of liquid propellant propulsion engine systems. The Project Engineer will plan and perform propulsion program tasks in conjunction with program management. Under general direction, you will implement design and analysis tasks, special studies, experiments, and hardware/test requirements. You shall also have the ability to successfully:



Provide imaginative, thorough, and practicable solutions to a wide range of technical problems involving the conventional utilization of engineering techniques
Conceive and plan projects involving conventional and the development of new methods to attain program objectives
Provide direction in problem investigations and resolution across functional areas
Lead investigation activity if sufficient experience in investigation of tools and procedures has been demonstrated
Prepare technical and design requirements in support of project goals
Keep current in relevant technologies and methods in support of project assignments
May provide technical guidance to less senior project engineers and project support personnel
Skills:
65% - Support Engineering teams working on rocket engine development and production program tasks/problem resolution, etc. Coordinate engineering work; manage technical progress, risk, schedule, and cost as needed. This includes all technical aspects of programs including external suppliers, test, and verification support.



15% - Monitor technical progress and interface with Program Management, Aerojet Rocketdyne customers, and other Aerojet Rocketdyne functional organizations to understand and develop resolution to program technical issues.



10% - Provide technical consultation to Program Management and Business Development organizations for business development activities such as writing white papers or preparing and presenting technical briefings to customers.



5% - Support the technical lead on proposals to government customers or prime contractors for propulsion development or technology programs.



5% - Provide inputs to written and verbal status reports to Engineering lead, Aerojet/Rocketdyne Management, and provide input and leadership at product team meetings.

Education:
-Requires a Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related discipline, and five (5) or more years of directly related experience.

-CAD knowledge is desirable.

-Working knowledge of Microsoft Office software is required.


Skills:
Required
PROJECT ENGINEERAEROSPACEACTIVE SECRET CLEARANCE

State/Province: California
City/Town: Canoga Park

Start Date: 05/14/2018 Hours Per Week: 40.00
Est. End Date: 12/21/2018 Hours Per Day: 8.00
Schedule Notes: Regular 40 hour week. OT possible. Days Per Week: 5.00
 
Job Number: MB-A8120386
Job Location: Canoga Park, CA
Rate: 50-66/hr DOE
Per Diem: no
Duration: 6 months
Input Date: 06/20/2018
Last Updated: 06/25/2018
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
MECHANICAL ENGINEER (with Aerospace experience)

Description:
This position will support mechanical analysis projects supporting aircraft weapon system programs. Specifically, the engineer will provide analyses, planning and draft documentation to address mechanical, electrical or avionics systems safety, suitability, and effectiveness requirements. The engineer will perform Failure Mode and Effects Analysis, Subsystem Hazard Analysis, engineering and configuration analysis, and develop engineering technical requirements for aircraft mechanical, electrical or avionics system components. Tasks include but are not limited to engineering evaluation, analysis, and recommended disposition of technical assistance requests for aircraft mechanical, electrical or avionics systems. The engineer will use SolidWorks or other CAD programs to create 3D models of aircraft mechanical, electrical or avionics components. The engineer will develop and manage large MS Excel spreadsheets. The engineer will write technical reports detailing analyses in MS Word as well as Adobe Pro. This position may be tasked to support similar duties on various other USAF weapon systems.
Required Skills & Experience
Bachelor’s Degree in a Mechanical or Aerospace Engineering discipline from an accredited University with six (6) years of experience.

Preferred Qualifications:
Master’s Degree in Engineering
Experience working on aircraft (Civilian/Military) mechanical, electrical, or avionics systems

Desired Skills & Experience
The ideal candidate will have:
Aircraft systems experience
Knowledge of finite element analysis techniques and SolidWorks or AutoCAD
Ability to interpret failure data from multiple DOD maintenance databases
Develop and manage large MS Excel Spreadsheets
Coordinate with other technical personnel in solving technical problems, gathering information, cost estimates and specifications
Compile and prepare comprehensive technical report
Work in a team environment and possess good communication skills, both written and oral
Applicant selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 
Job Number: KM0015
Job Location: Clearfield, UT
Rate: OPEN
Per Diem: No
Input Date: 06/08/2018
Last Updated: 06/19/2018
Firm Name: MIDCOM CORPORATION
Attention: Kristine M.
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
Manufacturing Engineer under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Manufacturing Engineer performs technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform producibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.
 
Job Location: Savannah, GA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/02/2018
Last Updated: 07/16/2018
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Andrew Walbert
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

Manufacturing Engineer 3

Description:
PDS TECH INC. is seeking candidate for Manufacturing Engineer 3 position located in Palmdale,CA.

Position Summary / Responsibilities


Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

Designs arrangement of machines within plant facilities to ensure most efficient and productive layout. ​

Designs sequence of operations and specifies procedures for the fabrication of tools and equipment and other functions that affect product performance.

Adapts machine or equipment design to factory and production conditions.

May incorporate inspection and test requirements into the production plan. Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality.

Develops manufacturing processes that are applicable to statistical process control, and may develop those techniques.
Provides guidance to engineering regarding design concepts and specification requirements to best utilize equipment and manufacturing techniques. Ensures processes and procedures are in compliance with regulations.

 
Qualifications:
Basic Qualifications:
  • Bachelor's Science STEM (Science, Technology, Engineering, Math) Degree and 5 years of related work experience. Or 3 Years with Masters; 0 Years with PhD.
  • Must be Familiar with MS Office (Word, Excel, PowerPoint and Project)
  • Must have CAD (CATIA) experience.
  • Manufacturing Liaison experience as well as have outstanding written and oral communication skills.

 

Preferred Qualifications:

  • MES experience
  • Previous experience with SAP
  • CATIA V5 Experience
  • Composites fabrication and tooling concepts
  • GD&T

 
Job Number: 1810083522
Job Location: Palmdale, CA
Duration: 0 months
Input Date: 03/30/2018
Last Updated: 11/16/2018
Firm Name: PDS TECHNICAL SERVICES
Attention: Phil Press
Address: 370 N WESTLAKE BLVD STE 120
City, State: WESTLAKE VILLAGE, CA 91362
Phone: 805/418-9862
800 Phone: 866/458-4322
Fax Phone: 805/418-9866
Email: cecjwestlake@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJWQAA2&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer I

Description:
Manufacturing Engineer I
Savannah, GA
Rate: $45


Unique Skills:

Basic understanding of Lean Manufacturing Tools and Processes preferred


Education and Experience Requirements:

Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Entry level position.


Position Purpose:
Under moderate supervision, create manufacturing work instructions, assist with Planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.



Principle Duties and Responsibilities:

Essential Functions: 1. Perform technical studies and conduct analysis of operations (existing or proposed). Develop plans and recommendations for equipment and tooling needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility. 10. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 11. Author DRDI/DMT rework instructions to support effective corrective actions. 12. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Perform productibility studies from engineering drawings. 5. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 6. Incorporate Lean Manufacturing Methodology into existing and future processes. 7. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 8. Support all Safety, Sustainability and Ergonomic Initiatives. 9. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Work on special projects. 2. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 3. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Basic knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, etc. 4. Lean Specialist certification or higher preferred.
 
Job Number: 9187
Job Location: Savannah, GA
Rate: $45
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/17/2018
Last Updated: 07/30/2018
Firm Name: INCONEN CORPORATION
Attention: Cathy O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Manufacturing Engineer II

Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Manufacturing planning experience preferred with Solumina and SAP experience.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 9223
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00/HR
Duration: Long Term Contract
Per Diem Split: Yes (if eligible)
Overtime: Possible

****MUST be a U.S. Citizen or Permanent Resident****


PREFERRED: Solumina, SAP, CATIA V5, SmarTeam, Fabrication Process Methods

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 9169
Job Location: Savannah, GA
Rate: $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 07/30/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term contract
Shift: 1st Shift

****MUST be a U.S. Citizen or Permanent Resident****

Unique Skills:
Experience with Catia V5, SAP, and Solumina highly preferred. Must be able to work with production and engineering personnel to resolve issues. Must be able to generate build plans and manufacturing bill of materials from 3D data.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.

Other Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.
 
Job Number: 7989
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 04/25/2018
Last Updated: 07/10/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer II

Description:
Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Duration: Long Term Contract


Unique Skills:
Solumina and SAP experience preferred

Requirements: 1. Proven knowledge of Lean and/or Six Sigma principles. 2. Must be knowledgeable about Engineering configuration requirements, tooling, quality control, plant safety, blueprint reading, and shop math. 3. Ability to operate computerized equipment, such as personal computers, CADAM, CATIA, Solumina, SAP, Corridor. 4. Lean Six Sigma Greenbelt Certification or higher preferred.

Education and Experience Requirements:
Bachelor's Degree in Mechanical, Manufacturing Engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen months Manufacturing Engineering, planning, or related technical experience.

Position Purpose:
Under minimal supervision, independently prepare, conduct, and evaluate analyses for planning improvements and problem solving for manufacturing issues (production methods and procedures) in a specific function (including layout, production flow, tooling and production equipment, material fabrication, assembly methods and planning) in a Production or Post-Production environment.

Principle Duties and Responsibilities:
Essential Functions: 1. Perform technical studies of a complex nature, conduct analysis of operations (existing or proposed). Prepare a report of recommendations for equipment needed and correct methods of manufacturing (including sequence of operations and detailed methodology of complex assemblies and installations as well as detail components). 2. Author detailed work instructions that optimize manufacturing process efficiency and opportunity for zero defects with functional Operations Engineer. 14. Author DRDI/DMT rework instructions to support effective corrective actions. 15. Author MBOM in SAP/Solumina/Corridor (as applicable) to ensure all parts defined by Engineering are installed during the assembly/installation process. 16. Assist in make-or-buy proposals and recommend corrective actions for areas of responsibility; evaluate vendors, attend vendor negotiations, and assist in resolving vendor problems. 3. Conduct research, investigation, and analysis in connection with assigned planning or other assigned projects, to ensure conformance to requirements. 4. Investigate and assist in preparing justification for equipment and facility requests. 5. Perform productibility studies from engineering drawings to identify opportunities to enhance manufacturing ability to meet requirements. Participate in Design for Manufacturing assessments with Engineering. 6. Apply statistical methods to estimate future manufacturing requirements and potential; make necessary computer inputs and generate data or reports as needed. 7. Perform audit of co-workers output based on defined requirements and procedures. Must demonstrate knowledge of ME policies and procedures. 8. Incorporate Lean Manufacturing Methodology into existing and future processes. 10. With minimal supervision, lead/coordinate the implementation of projects between multiple organizations. 11. Apply Lean and Six Sigma principles to manufacturing methods as a team member or leader. 12. Support all Safety, Sustainability and Ergonomic Initiatives. 13. Aid in development and maintenance of Business Continuity Plan.

Additional Functions: 1. Ensure Quality policies are being practiced; make recommendations and implement procedures to improve quality. 2. Initiate and maintain accurate daily/weekly activity status based on work output, as required. Perform other duties as assigned.
 
Job Number: 8642
Job Location: Savannah, GA
Rate: $50.00 - $55.00/HR
Per Diem: Split
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 07/11/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Sean O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and input to structural loads models. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (CATIA preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Requires a BS in Related Field.

Update Mass Properties Databases.
-Assist and perform mass property trade studies as necessary.
-Suggest and track weight improvement ideas.
-Assist in Mass Properties measurements from a detail up to a vehicle level.
-Other Mass Properties tasks as needed.

The position will be working detail design on a new composite vehicle. They will primarily be reviewing drawings and incorporating them into our database in support of weight tracking, loads, stress and flutter; working trade studies to support configuration decisions; and tracking and suggesting weight savings ideas to support the program requirements.

The Structures Company is an AA/EOE.
 
Job Number: 104
Job Location: Mojave, CA
Rate: $75/hr. DOE
Per Diem: Yes
Duration: 9+ Month
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mass Properties Engineer

Description:
PRIMARY RESPONSIBILITIES INCLUDE:
Provide mass properties engineering in accordance with industry standards and Society of Allied Weight Engineers (SAWE) best practices. Analyze mass properties impacts of internal and external modifications, and impacts to systems and subsystems. Analyze and account for changes in mass properties throughout program lifecycle.
Model and calculate mass properties data to support all phases of project development. Translate customer requirements into mass models for development of mission profiles. Analyze mission configurations using 2D drawings and 3D CAD. Generate mass properties distributions for modifications and integrate with OEM data for input to structural loads models. Manage subcontractor efforts related to mass properties including vendor weight control. Lead weight reduction tasks.
Articulate mass properties requirements, risks, opportunities, and status at formal design reviews to both internal and external customers.
Generate FAA and DoD mass properties documentation meeting requirements of airworthiness certification including weight and balance manuals, supplements, and equipment lists.
Perform weight and balance measurements of components and final products. Coordinate mass properties requirements with multi-disciplinary teams including maintenance, production, logistics support, flight test, flight operations and other disciplines.

EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
Requires a BS in Related Field.

Sr. Mass Properties Engineer with 10+ Years of experience
Familiarity with SAWE and American Institute for Aeronautics and Astronautics (AIAA) Recommended Practices and Standards, Automated Weight and Balance System (AWBS) and FAA airworthiness regulations.
Knowledge and experience in aircraft operations, familiarity with Microsoft Office, and 3D CAD/CAM tools (Solidworks preferred)
Familiarity with aerospace system design and integration, manufacture, and maintainability, including familiarity with best practices in mechanical, electrical, and systems design.
Must be a problem solver capable of working alone or with a technical team in a fast paced environment.

Note: Ability to obtain/maintain a security clearance may is required.

The Structures Company is an AA/EOE.
 
Job Number: 196
Job Location: CO
Rate: $55-$63/Hr., DOE
Per Diem: Yes
Overtime: Yes
Duration: 6+ Months
Start Date: May 2018
Input Date: 05/24/2018
Last Updated: 08/01/2018
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Checker - Tech Spec I

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of products and services

Unique Skills:
• Check 2D engineering data and 3D models for conformance to Gulfstream requirements as directed
• Check parts for fit, form and function to the extent that information is available.
• Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5, SmarTeam, as well as other CAD datasets.
• Checkers are responsible for determining the acceptability of data in the following areas:
o Accuracy and completeness of engineering product definition data, including CAD and PDM data.
o Proper application and compliance with all Engineering and customer drawing requirements.
o Use and understanding of GD&T a must.
o Dimensioning and tolerancing including familiarity with ASME Y14.5.
o Application of best drafting and design practices and procedures.
o Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
o Advise Design personnel regarding GAC drawing and design practices and procedures.
o Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
o Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
o Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
o Knowledge of GAC parts list & PdocM, a plus.

Principal Duties and Responsibilities:
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.

Education and Experience Requirements:
• Bachelor’s degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
 
Job Number: 24-260
Job Location: Savannah, GA
Rate: $50-$55
Per Diem: YES
Overtime: YES
Duration: 1 YR Plus
Start Date: ASAP
Input Date: 05/22/2018
Last Updated: 08/06/2018
Firm Name: PRECISION PERSONNEL INC
Attention: Jeff York
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical 2D and 3D Engineering Checker

Description:
Mechanical 2D and 3D Engineering Checker
Savannah, GA
Rate: $55-$63

Unique Skills:

Required Check 2D engineering data and 3D models for conformance to Company requirements as directed. Check parts for fit, form and function to the extent that information is available. Must have experience in Product Lifecycle Management (PLM) processes and tools, including checking CATIA v5 , SmarTeam, as well as other CAD datasets, in accordance to Company requirements as directed. Checkers are responsible for determining the acceptability of data in the following areas:
• Accuracy and completeness of engineering product definition data, including CAD and PDM data.
• Proper application and compliance with all Engineering and customer drawing requirements.
• Use and understanding of GD & T a must.
• Dimensioning and tolerancing including familiarity with ASME Y14.5.
• Application of best drafting and design practices and procedures.
• Applies extensive and diversified knowledge of industry fabrication practices for aircraft parts.
• Advise Design personnel regarding GAC drawing and design practices and procedures.
• Maintain a current and up-to-date knowledge of developments in the structures/systems design disciplines drawing/data requirements, as well as all interrelated disciplines of design build teams.
• Assist in the research and development of Product Data Management (PDM)/Computer Aided Design (CAD) applications and methodologies for Engineering and when necessary, other departments.
• Actively works to improve daily processes and ensure that all Data Integrity work and CAD and PDM solutions meet customer requirements.
• Knowledge of GAC parts list & PdocM, a plus. Essential Duties and Responsibilities
• Checks designs of complex mechanical aircraft interior furnishing, structures, and/or systems.
• Ensures designs meet customer criteria, quality standards and FAA requirements.
• Adheres to budget and project schedules.
• Provides design guidance and feedback to other engineering personnel.
• Other duties as assigned.
• Knowledge of industry design and documentation standards.
• Experience with mechanical assemblies and manufacturing technique design.
• Ability to work independently and cross-functionally.
• Experience in communicating with employees/teams in productive and efficient manner.
• Strong communication and problem-solving skills.


Education and Experience Requirements:

Bachelors degree in engineering, a related curriculum, or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. See Other Requirements in Job Description. 5 yrs in specific technical discipline or 10 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.

Position Purpose:

Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of Gulfstream products and services

Principal Duties and Responsibilities:

Essential Functions: 1. Contributes to planning, developing and coordinating of important engineering projects 2. Provides specialized technical assistance to team members 3. Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems 4. Determines and develops own approach to solutions within schedule and cost objectives 5. Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives 6. Acts as liaison with representatives outside of the assigned group/area

Additional Functions: 1. Actively works to improve daily processes and ensures all work meets customer requirements 2. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product 3. Performs other duties as assigned

Other Requirements: 1. Advanced degree in engineering related field preferred 2. The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Number: 7821
Job Location: Savannah, GA
Rate: $55-$63
Per Diem: Yes
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 03/07/2018
Last Updated: 08/06/2018
Firm Name: INCONEN CORPORATION
Attention: Rex Calkins
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Location: Windsor Locks, CT
Rate: $48.25/HR
Duration: 1 year contract
Shift: 1st Shift
Per Diem Split: NO

**Must be a U.S. Citizen**
**Must have a Bachelor's Degree**

Job Description:
- Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
- Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Requirements:
- Familiarity with aerospace design practices including designing for light weight design and random vibration environments.
- Working knowledge of geometric dimensioning and tolerance analysis.
- Modeling and drawing creation in Creo/Pro-Engineer.
- Experience with Company designed hardware on the EMU, ESOC and Space Station programs is a plus.

Education:
- Bachelor's Degree
- 5+ years of experience
 
Job Number: 9308
Job Location: Windsor Locks, CT
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 1 yr
Start Date: ASAP
Input Date: 08/29/2018
Last Updated: 10/31/2018
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
US Citizenship is required

Description/Comment:
Manages teams and multiple projects in research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electro-mechanical systems, instruments, controls, engines, and ground test / mechanical tests. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Additional Job Details:
Familiarity with aerospace design practices including designing for light weight design and random vibration environments; working knowledge of geometric dimensioning and tolerance analysis; modeling and drawing creation in Creo/Pro-Engineer. Experience with internal designed hardware on the EMU,ESOC and Space Station programs is a plus.

Education:
Bachelor's Degree


Hema Murali
Senior Technical Recruiter
Apollo Professional Solutions, Inc.
hmurali@apollopros.com
Tel: 860-254-6337
 
Job Location: Windsor Locks, CT
Rate: 48
Per Diem: Yes
Overtime: N/A
Duration: 12 months
Start Date: ASAP
Input Date: 06/05/2018
Firm Name: APOLLO PROFESSIONAL SOLUTIONS
Attention: Hema
Address: 42 MAIN ST
City, State: WINDSOR LOCKS, CT 06096
Phone: 860/254-6336
800 Phone: 866/277-3343
Fax Phone: 860/623-8228
Website: www.apollopros.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer SECRET CLEARANCE needed UTAH

Description:
Active Secret DoD Clearance within 5 ½ years of last investigation
Bachelor’s Degree in Aerospace, Mechanical or Manufacturing
Experience in working with aerospace specifications and drawings
Experience in the use of ANY CAD systems (NX -preferred)
Experience designing / supporting an aerospace manufacturing process with the necessary materials, tooling, and equipment
Knowledge of root cause / corrective action processes and techniques
Functional knowledge of Process Failure Modes and Effects Analysis (PFMEA)
Functional knowledge of production control systems (SAP/Visual Mfg/etc)
Experience authoring, modifying and auditing procedures
Experience estimating, planning, and streamlining manufacturing processes
Experience using SPC to monitor and improve processes
Experience addressing manufacturing discrepancies through a formal MRB process
Good organizational skills and ability to work with minimal direction
Excellent computer skills. Skilled in working with Microsoft Office applications
Strong problem solving skills
Excellent verbal and written communication skills
Preferred Skills and Experience:
Composites hand layup, fiber placement, bonding, cure, assembly, and machining experience
 
Job Number: 2963
Job Location: promontory, UT
Rate: 60-100+ / Hr
Per Diem: YES
Overtime: Possible
Duration: 6 - 12 months
Start Date: 2/3 weeks
Input Date: 04/13/2018
Last Updated: 08/21/2018
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Mechanical Engineer
Carlsbad, CA
6+ month contract


Summary: With minimal supervision, this position is responsible for, but not limited to, contributing to varied projects and products for the development of products, manufacturing processes or production equipment. This position will be assigned a wide range of development tasks to support the technical needs of the Company.

REQUIREMENTS
•Knowledge of CAD and Pro/Engineering.
•Active Secret Clearance
•Composite layup experience
•Experience with manufacturing processes
•Working knowledge of Microsoft Windows.
•Strong practical technical ability.
•Ability to work in a fast-paced environment.
•Good organizational and communication skills, both written and oral.

EDUCATION / EXPERIENCE
•Associate Degree in a technical discipline or equivalent experience.
•10+ years of experience directly related to specific responsibilities described.


RESPONSIBILITIES
•Independently analyze and improve existing products, equipment, processes, or designs as assigned.
•Develop products, manufacturing methods and processed in the production of components and methods to reduce manufacturing costs.
•Investigate, establish and implement requirements for equipment, tooling, materials and methods of manufacturing, including facility layout as required for new or revised products.
•Create documentation to support existing products, processes and equipment in accordance with ISO 9001 requirements.
•Design and implement products, processes, equipment, and documentation for all new projects.
•Participate in cost reduction and cost of quality programs.
•Assist maintenance in troubleshooting and repair of equipment.
•Assist Operations Managers in solving production constraints.
•Assist Engineering with the design and prototyping of new or modified products.
•Support production and development of new products through independent review, root cause analysis, corrective action, discrepancy handling, and defect prevention.
•Independently conduct process capability studies, design experiments, conduct studies and analyze to ensure products meet requirements.
 
Job Number: 53912
Job Location: Carlsbad, CA
Rate: Open
Per Diem: Possible
Overtime: Possible
Duration: 6+ months
Start Date: ASAP
Input Date: 06/05/2018
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Laura Leszek
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:



USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


____________________________________________________________________


Job Responsibilities



  • Perform under a process oriented development system and be able to provide process improvement suggestions once knowledgeable

  • Perform autonomously under the direction of team leaders, program management and engineering management

  • Work closely with other engineering disciplines to ensure the mechanical design is appropriate for the project/product design approach

  • Contribute to schedule creation and ensure schedule commitments are met

  • Create and present program and/or task status presentations to team members and engineering management

  • Create and present clear and concise technical descriptions to engineering leadership and customers

  • Mentor junior engineers and provide guidance to design manufacturing team members

  • Provide input to design and document reviews

  • Spearhead investigations for open ended complex problems

  • Develop detailed hardware requirements based on product theory, system level requirements and customer requirements

  • Complete designs that meet documented hardware requirements

  • Create test procedures to support the testing of products to industry and government standards

  • Review hardware defects and identify systemic root causes and process improvements


 


Basic Qualifications



  • Bachelor’s degree in a Science, Technology, Engineering or Math (STEM) discipline, preferably Mechanical Engineering

  • US Citizenship or Permanent Resident (Green Card) required

  • Experience in mechanical engineering design and development

  • Knowledge of engineering materials and processes

  • Experience with structural and thermal management design

  • Proficient in a 3D CAD solid modeling software package (SolidWorks preferred)

  • Proficient in tolerance analysis and application of Geometric Dimensioning and Tolerancing principles

  • Strong technical, analytical and problem solving skills

  • Ability to effectively communicate throughout all levels of the organization


 


Additional skills or experience a plus:



  • Packaging of electronic and/or precision optical systems

  • Design of manufacturing, calibration and test support equipment

  • Aluminum fabrication techniques including: machining & investment casting

  • Experience in avionics or aerospace industry

















Compensation



Benefits



Diversity/EEO



The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



401K Retirement Plan & Medical Insurance is available for candidates who qualify



USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!















Partial Aerospace & Defense Client List



BAE Systems


Gulfstream Aerospace


Moog Inc.


Sikorsky Aircraft - Lockheed Martin


Orbital ATK


Rockwell Collins


Spirit AeroSystems







 
Job Number: R14060
Job Location: Wilsonville, ORE
Rate: 45-55
Per Diem: Yes, Split
Overtime: Some
Duration: 6 Months
Start Date: ASAP
Input Date: 05/30/2018
Last Updated: 06/08/2018
Firm Name: NESC STAFFING
Attention: Brad
Address: 150 MIRONA RD
City, State: PORTSMOUTH, NH 03801
Phone: 603/431-9740
800 Phone: 800/562-3463
Fax Phone: 800/637-2562
Website: www.nesc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
  • BS in Mechanical Engineering, MS preferred.
  • Minimum of nine years of experience in developing precision sensor
  • Experience in system level hardware design & development with an emphasis in mechanical and structural analysis and test for space-based environments. 
  • Experience using both finite element modelling (FEM) and CAD tools, such as FEMAP/NASTRAN and Autodesk Inventor.
  • Opto-Mechanical hardware design experience utilizing structured engineering process from requirement definition through design, development, and testing.
  • Expert mechanical analysis background including tolerancing, thermal, structural (modal, stress, deflection).
  • Structure and sensor level testing experience a plus
  • Space mechanism experience a plus
     
  • Job Number: 41-002
    Job Location: Wilmington, MA
    Rate: DOE, but very competitve
    Per Diem: Yes
    Overtime: No
    Duration: 1 Year plus
    Start Date: ASAP
    Input Date: 04/26/2018
    Last Updated: 06/22/2018
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    Mechanical Engineer

    Description:
    The Mechanical Engineer will perform engineering activities in accordance with SIS-VT work instructions and procedures. This position is to support work ongoing at the SIS-VT facility. This position will work in the following capacity:
    • Investigate field failures and production issues associated with the Electric Brake Actuator (EBA)
    • Create the needed artifacts to support the mechanical engineering documentation and release; artifacts can be used as evidence to substantiate the execution of processes

    Basic Qualifications
    • Bachelor Degree in Mechanical Engineering, and/or equivalent proven experience
    • Critical Thinker & Able to offer Value Added Solutions
    • Able to read and understand part drawings
    • Familiar with basic hand tools, capable of component disassembly
    • Familiar with Teamcenter or an equivalent PLM tool
    • Familiar with SAP

     
    Additional Qualifications
    • Experience with  engineering tools such as CAD programs (preferably Pro-E or NX), ANSYS
    • Experience with electromechanical actuation: electric motors, drivetrains/power transmission (bearings, gears, etc.)
    • Self-Starter/Independent worker that demonstrates initiative and sound judgment and has the ability to manage and coordinate their work with multiple groups inside and outside the department

    Skills:

    • Proficient in communicating in English Language
    • Strong Communication and Interpersonal Skills
    • Strong Analytical and Problem Solving Skills
    • Strong Computer and Web Navigation skills

     
    Job Number: 1810080560
    Job Location: Vergennes, VT
    Duration: 12 months
    Input Date: 04/13/2018
    Last Updated: 11/16/2018
    Firm Name: PDS TECHNICAL SERVICES
    Attention: Roger Greco
    Address: 50 FOUNDERS PLAZA STE 304
    City, State: EAST HARTFORD, CT 06108
    Phone: 860/289-2643
    800 Phone: 866/636-4723
    Fax Phone: 800/556-5284
    Email: northeastjobs@pdstech.com
    Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002diBgAAI&URLSource=cjhunter

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer Level 4

    Description:
    Description

    The successful candidate will provide product engineering support to PWB/CCA design activities for Ground base, AirBorne, surface ship and under seas programs. Candidate will interact with PWB designers, and electrical/mechanical engineers and production facilities.
    Candidate will work as a member of Integrated Product Development teams throughout the design process to ensure PWB/CCA designs are optimized for manufacturing.
    Perform DFM (Design for Manufacturing) reviews of PWB/CCA designs to ensure producibility goals are met within technical, cost and schedule requirements.
    Support the transition of designs to manufacturing by providing technical support to both internal and external facilities.
    Assist in the resolution of design issues identified during production. Keep DFM standards up to date with improvements in manufacturing process capabilities.
    Perform trade studies
    Skill/Experience/Education 

    Mandatory:

    The candidate must have previous experience and knowledge of manufacturing processes and materials related to PWB/CCA designs and production.

    Candidate must be familiar with military systems design/production processes.

    Knowledge of industry standards and common practices including but not limited to IPC-2221, J-STD-001, IPC-610, IPC-6012, IPC-600, IPC-6013 and the standards specified within them.

    Work in a team environment as well as independently.

    Candidate must have well developed communications skills and be able to communicate effectively at all levels including outside PWB design and manufacturing facilities.



    Desired:

    In-depth knowledge of PWB fabrication and assembly processes.

    Familiar with manufacturing processes for high density interconnect (HDI) designs.

    Ability to identify and evaluate complex sets of dependent PWB fabrication and assembly processes and develop creative solutions.

    Familiar with Zuken and Cadence CAD tools. Experience evaluating design with DFM software tools such as ADIVA or Valor.
     
    Job Number: 54200
    Job Location: Liverpool, NY
    Start Date: ASAP
    Input Date: 06/04/2018
    Firm Name: BUTLER AEROSPACE & DEFENSE
    Attention: Becky Norman
    Address: SHELTON POINTE STE 204
    2 TRAP FALLS ROAD

    City, State: SHELTON, CT 06484
    Phone: 203/926-2705
    Fax Phone: 203/926-0082
    Website: www.butler.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Engineer SECRET CLEARANCE needed UTAH

    Description:
    Job description:
    Experience in the use of ANY 3-D CAD system (NX Preferred)
    Aerospace assembly and component installation experience e
    Structural and non-structural bonding experience
    Support assembly and installation of composite and metallic components into larger aerospace assemblies. Work closely with operations personnel to develop manufacturing solutions and solve production issues component and sub assembly installation, line drilling, power feed drilling, fastened assembly of composite and metallic structures, structural and non-structural bonding, hydraulic component installation, electrical component installation, and functional test of electrical and hydraulic systems. Learn and understand requirements to determine product impacts and recommend disposition of the parts. Work in a cross functional team to develop and implement process improvements.
    Requirements & Qualifications:
    •Active Secret DoD Clearance needed
     
    Job Number: 2985
    Job Location: promontory, UT
    Rate: 60-100/ hr
    Per Diem: YES
    Overtime: Possible
    Duration: 6-12 months
    Start Date: 2/3 weeks
    Input Date: 04/13/2018
    Last Updated: 10/04/2018
    Firm Name: ADVANCED TECHNOLOGY
    Attention: Domenic
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Southeast
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    Mechanical Engineers

    Description:
    3D CAD, FEA a plus
     
    Job Location: Midwest
    Input Date: 01/14/2015
    Firm Name: ADVANCED TECHNOLOGY
    Address: 15 KENNETH MINER DR
    City, State: WRENTHAM, MA 02093
    800 Phone: 877/334-7700
    Fax Phone: 877/335-7700
    Email: annmarie@advancedtechno.com
    Website: www.advancedtechno.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems - Ground Support Equipment (GSE) Engineer

    Description:
    This experienced, hands‐on Mechanical Systems Engineer will coordinate mechanical systems engineering efforts related to the flight testing, operational implementation, documentation, FAA Part 400 licensing, modifications management and issues resolution of air vehicles and GSE (ground support equipment). Qualified candidates should have a strong technical background in aerospace or aviation mechanical systems and flight controls, as well as composite structures and/or aviation/aerospace ground support equipment. In any of these roles the person in this position may be asked to provide day to day direction to operations technicians.


    Description
    Oversee and manage the development, implementation, testing, and integration of air vehicles for mechanical systems, to include Flight Control Systems, Landing Gear, Brakes, and GSE.
    Work closely with maintenance management and engineering to maintain vehicle/GSE functionality and to improve systems, processes, and operations for the air vehicle mechanical systems.
    Coordinate the engineering activities between the various engineering specialties within the product team.
    Track, manage and mitigate the mechanical systems engineering risks.
    Ensure all customer product requirements are met.
    Conduct tests and/or missions support from the Mission Control Center for mechanical systems as required.
    General duties include:
    · Coordinate and/or integrate with systems engineers and counterpart designers on modifications and/or design change proposals for the air vehicle systems.
    · Review and propose concepts for redesign recommendations based on operational experience, reliability, maintainability, etc. on the air vehicle systems.
    · Review and approve technical publications. Propose modifications where appropriate. Includes:
    o Review and approve repair manuals for mechanical systems. May author portions as appropriate.
    o Approve and/or review disposition for component removals and replacements.
    o Author and/or approve mechanical system anomaly troubleshooting dispositions.
    o Author and/or approve mechanical systems Work Instructions/Engineering Reports.
    · Develop and remain technical authority for assigned Flight Rules, Launch Commit Criteria, and Required Equipment List (REL) items, and how they interact with the air vehicle systems.
    · Manage and implement process to make real-time decisions and/or issue waivers to hazard reports, flight rules, launch commit criteria, and REL items for the air vehicle systems.
    · Provide mission control room systems engineering support in real time during the mission to monitor systems performance and recommend corrective actions on issues.
    · Coordinate post flight data analysis functions, including continued development of system health monitoring and reliability data for more established systems
    · Integrate analysis of tear down and failure reports for failed vendor components (if available)
    · Communicate reliability data/recommendations back to designers.
    Bachelor’s degree in Aerospace or Mechanical Engineering, with 1+ years relevant industry experience
    Successful aviation/aerospace project engineering management experience, is desired but not required
    Working knowledge of aircraft and space systems and familiarity with relevant aerospace standards (FAA, FAA‐AST etc.)
    1+ Experience with aviation mechanical/flight control systems, pneumatic systems, design or operations desired
    Excellent analytical and problem-solving skills with high attention to detail
    Ground and flight testing experience of new aircraft systems is desirable
    Excellent verbal and written communication skills
    Excellent interpersonal and customer service skills
    Strong IT skills, including Excel and Product Lifecycle Management (PLM) tools. Computer Aided Design (CAD) experience is desirable
    Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)

    The Structures Company is an AA/EOE.
     
    Job Number: 215
    Job Location: Mojave, CA
    Rate: $55-$70/Hr.
    Per Diem: Yes
    Overtime: Yes
    Duration: 6 Months
    Start Date: ASAP
    Input Date: 06/04/2018
    Last Updated: 09/10/2018
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mechanical Systems Engineer

    Description:
    Mechanical Engineer to design, develop and release system, subsystem componentry, to include component mounting brackets or provisions for various vehicle systems, subsystems devices

    Ability to Design and Integrate Fuel, Hydraulic (strong desire), or Automatic Fire Extinguishing (AFES) Subsystems and components into military vehicles

    Familiarity with hydraulic hose, tube and fitting standards



    Should be able to select and integrate shock isolation mechanisms to meet specific vehicle of component requirements

    Ability to design articulating, locking or sliding provisions to Human Factors requirements

    Must have CAD software experience in Pro-E or UG's NX

    Performing failure analysis
     
    Job Location: MI
    Rate: Open
    Per Diem: Split
    Overtime: Possible
    Duration: 12 mos +
    Start Date: ASAP
    Input Date: 06/05/2018
    Firm Name: PANTHER GROUP
    Attention: Marques
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Mentor Capital Harness Design Engineer

    Description:
    Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies. Their employees are dedicated to making the Company the World’s preferred supplier of land vehicles and weapons systems.

    If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    Mentor Capital Harness Design Engineer
    (U.S. Citizenship Required*)
    Sterling Heights, MI
    2018-6114

    Responsibilities:
    • Work with systems engineers to define whole vehicle pin-level interconnect
    • Work with physical architects to define harness routing scheme
    • Develop vehicle harness designs
    • Work with CAD designers to route vehicle harnesses
    • Collaborate with CAD designers on harness drawing release
    • Collaborate with CAD designers on drawing release for electrical installations, interconnects, and elementary wiring diagrams

    Qualification:
    • Ability to lead multi-engineer projects and balance cost/schedule/technical priorities
    • Occasional overtime, and weekend hours may be required to complete critical tasks.
    • Strong interpersonal skills and ability to work with interdisciplinary teams.
    • Strong multi-tasking skills
    • Experience with Mentor Graphics Capital desirable
    • Experience with Pro-E Creo desirable
    • Experience with NX desirable
    • Must be able to obtain a security clearance if necessary.
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • Bachelors degree in Electrical Engineering with a minimum of 3-5 years of post graduate work required.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2018-6114
    Job Location: Sterling Heights, MI
    Rate: Based on experience
    Input Date: 06/04/2018
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Jeff Prukop
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NX Electrical Designer / Engineer

    Description:
    Design and develop vehicle 3D wire harnesses, clipping and brackets to mount components and systems using Siemens NX CAD..
    Coordinate and execute the packaging development and documentation for all Mechatronics owned electrical /electronic devices and their mounting systems.
    Create and maintain detailed part and assembly drawings.
    Assist with selection of proper materials, tolerances, finishes, fasteners and production methods.
    Analyze and provide creative, technically sound solutions to problems encountered in validation and production.
    Apply Client and industry drafting and design standards, including GD&T.

    BASIC QUALIFICATIONS:

    Mechanical or Electrical Engineering degree or related engineering degree preferred but not required.
    Siemens NX CAD experience required
    Create 3D wire harnesses, clipping and brackets to mount electrical components.
    Previous electrical and electronics packaging experience preferred.
    A general knowledge of automotive systems preferred.
    Excellent verbal and written communication skills, as well as personal computer office automation skills are required.
     
    Job Number: 4924
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Long term
    Start Date: ASAP
    Input Date: 06/07/2018
    Firm Name: OLSA RESOURCES INC
    Attention: Dina
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    NX Surfacing Engineer

    Description:
    We’re looking for a solid NX designer that knows how to surface in NX. Advanced Engineering is needing CAD modeler for a new vehicle design project. Looking for someone who can model aerodynamic surfaces in NX and has design experience with structural surfacing. This person will be taking styled surfaces and building them into manufacturable components that we will prototype and test with.
     
    Job Number: 6518
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: Long Term
    Start Date: ASAP
    Input Date: 06/05/2018
    Firm Name: OLSA RESOURCES INC
    Attention: Dina
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    PLM Configuration Analyst III

    Description:
    Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy

    Unique Skills:
    • Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

    Education and Experience Requirements:
    • Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required.
    • Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
    • 3 years of Database experience, data migration/conversion or related experience preferred.

    Principle Duties and Responsibilities:
    • Create plans according to schedules, for engineering assignments, and act independently to carry them out.
    • Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
    • Direct activities for lower level engineering staff assigned to specific projects.
    • Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs.
    • Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
    • Determine user needs and utilize system queries and utilities to support users information research.
    • Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
    • Design and develop business reports and system status metrics.
    • Provide training on new functionalities and upgrades.
    • Ensure compliance with FAA regulatory requirements for management and control of all type design data.
    • Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product.
    • Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
    • Previous experience with digital pre-assembly of product components (aerospace preferred).
    • Experience in process mapping and other process improvement techniques preferred.
    • Familiarity with computer-aided design, manufacturing and product data management systems.
    • Basic knowledge of design engineering and manufacturing engineering applications and processes
    • Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
    • Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
     
    Job Number: 24-237
    Job Location: Savannah, GA
    Rate: $57
    Per Diem: Yes
    Overtime: Yes
    Duration: 1 Year Plus
    Start Date: ASAP
    Input Date: 05/17/2018
    Last Updated: 08/13/2018
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    PLM Configuration Analyst III

    Description:
    PLM Configuration Analyst III

    Savannah, GA
    Long Term Contract
    Pay Rate: DOE

    1st Shift

    Unique Skills:

    Experience with 3DX/V6 preferred

    Education and Experience Requirements:

    Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Six (6) years of engineering or IT experience required. Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).

    3 years of Database experience, data migration/conversion or related experience preferred.


    Position Purpose:
    Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Gulfstream products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

    Principle Duties and Responsibilities:

    Essential Functions:
    1. Create plans according to schedules, for engineering assignments, and act independently to carry them out.
    2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity.
    3. Direct activities for lower level engineering staff assigned to specific projects.
    4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures.
    6. Determine user needs and utilize system queries and utilities to support users information research.
    7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems.
    8. Design and develop business reports and system status metrics.

    Additional Functions:
    1. Provide training on new functionalities and upgrades.
    2. Ensure compliance with FAA regulatory requirements for management and control of all type design data.
    3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

    Other Requirements:
    1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred).
    2. Previous experience with digital pre-assembly of product components (aerospace preferred).
    3. Experience in process mapping and other process improvement techniques preferred.
    4. Familiarity with computer-aided design, manufacturing and product data management systems.
    5. Basic knowledge of design engineering and manufacturing engineering applications and processes.
    6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project.
    7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
    Languages Required (in addition to English): None
     
    Job Number: 8978
    Job Location: Savannah, GA
    Rate: DOE
    Per Diem: Possible Split
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 08/08/2018
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    PLM Configuration Analyst III

    Description:
    PLM Configuration Analyst III

    Location: Savannah, GA
    Pay Rate: $57/hr
    Duration: Long Term W2 Contract
    Shift: First

    Unique Skills:
    Preferred: Proficient in CATIA V5 NC 3 Axis Programming, CATIA Knowledgeware and VB CATIA Automation

    Education and Experience Requirements:
    -Bachelor's Degree in Engineering, Computer Science or a related curriculum required or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    -Six (6) years of engineering or IT experience required.
    -Three (3) years of experience with CAD and/or PDM tools required. (CATIA and ENOVIA SMARTEAM preferred).
    -3 years of Database experience, data migration/conversion or related experience preferred.

    Position Purpose:
    Perform engineering work related to configuring, deploying, maintaining, and upgrading CAD and Product Lifecycle Management (PLM) applications and processes. Responsible for tasks related to the development and deployment of systems, methodologies, standards and processes that result in the ability to create and manage high fidelity digital data for Company products. Independently perform tasks defined in the project plan to ensure PLM systems integrity and manage all product configuration data and information throughout the product's lifecycle. Determine user needs and define technical contents for the development of training courses for CAD and PLM Applications. Direct team members on a daily basis regarding requirements, solutions and implementation strategy.

    Principle Duties and Responsibilities/Essential Functions:
    1. Create plans according to schedules, for engineering assignments, and act independently to carry them out. 2. Responsible for engineering feasibility of CAD and PLM solutions for complex assignments or full project of minor complexity. 3. Direct activities for lower level engineering staff assigned to specific projects. 4. Interpret user needs to determine engineering and product data requirements, CAD and PLM functional requirements, perform analysis and create action plans to implement process and data modeling to meet user needs. 5. Tailor CAD and PLM applications functionality, to established requirements, policies and procedures. 6. Determine user needs and utilize system queries and utilities to support users information research. 7. Direct the testing and implementation of new deployment or revisions to the CAD and PLM systems. 8. Design and develop business reports and system status metrics.

    Additional Functions:
    1. Provide training on new functionalities and upgrades. 2. Ensure compliance with FAA regulatory requirements for management and control of all type design data. 3. Maintain a current and up-to-date knowledge of developments in a specific discipline and/or other related aircraft fields in order to recommend innovations to improve the quality, economy, and effectiveness of the company product. Perform other duties as assigned.

    Other Requirements:
    1. Experience with CAD and PDM tools (CATIA and ENOVIA LCA, VPM preferred). 2. Previous experience with digital pre-assembly of product components (aerospace preferred). 3. Experience in process mapping and other process improvement techniques preferred. 4. Familiarity with computer-aided design, manufacturing and product data management systems. 5. Basic knowledge of design engineering and manufacturing engineering applications and processes. 6. Proven computer literacy that includes PC Windows environment with specific skills in MS Access, Excel, PowerPoint, Word, Visio and MS Project. 7. Must have strong interpersonal skills, self motivated, and a general understanding of engineering/manufacturing data requirements and design tools.
     
    Job Number: 8822
    Job Location: Savannah, GA
    Rate: 57
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 03/28/2018
    Last Updated: 08/06/2018
    Firm Name: INCONEN CORPORATION
    Attention: Rex Calkins
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Pilot Controls Systems Engineer

    Description:


    USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net


    ____________________________________________________________________


    Job Description



    • We are looking for a Senior Systems Engineer to support qualification and verification responsibilities in the development of pilot control systems, throttle control systems, and related flight control products for the next generation of business, regional, and air-transport aircraft.

    • Engineering duties will focus on the later stages of product life cycle, from critical design completion through manufacture, environmental qualification, and system testing. While working in a cross-functional team environment, daily tasks will include:


      • Requirements: management

      • System/Mechanical design, modeling, analysis, and review

      • Test/verification planning, development, and execution,

      • Occasional customer interface, coordination, and communication, and

      • Coordination with manufacturing operations.



     


    Qualifications:



    • Proficiency in using DOORS software for Requirements capture and management is a plus.

    • Experience with NX Cad Software, mechanical drawings, manufacturing processes is highly desired.

    • Knowledge/experience in the area of electro-mechanical systems or aerospace mechanical systems is desired.


     


    Education:



    • Minimum Degree: Bachelors’ of Science in an Engineering discipline with high mechanical context such as Mechanical Engineering, Aero Engineering, Electrical Engineering, Systems Engineering or other relevant engineering/physics/science discipline.


     

















    Compensation



    Benefits



    Diversity/EEO



    The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



    401K Retirement Plan & Medical Insurance is available for candidates who qualify



    USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




     













    Partial Aerospace & Defense Client List



    BAE Systems


    Gulfstream Aerospace


    Moog Inc.


    Sikorsky Aircraft - Lockheed Martin


    Orbital ATK


    Rockwell Collins


    Spirit AeroSystems






     
    Job Number: R13922
    Job Location: Irvine, CA
    Rate: 60-70
    Per Diem: Yes, Split
    Overtime: Some
    Duration: 24 Months
    Start Date: ASAP
    Input Date: 05/30/2018
    Last Updated: 06/08/2018
    Firm Name: NESC STAFFING
    Attention: Brad
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    Phone: 603/431-9740
    800 Phone: 800/562-3463
    Fax Phone: 800/637-2562
    Website: www.nesc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Piping Designer - Petrochemical Refinery (OK)

    Description:
    PETROCHEMICAL REFINERY RESUMES ONLY!

    Basic Purpose/Accountabilities:
    Accountable for all Refinery projects handled by the Refinery Technical Services Group.

    Primary Functions/Responsibilities:

    Safety
    � Provide an environment and systems that result in all work being conducted safely, environmentally friendly, and technically sound. All compliance requirements will be met.

    People
    � Participate in the project teams.

    Integrity
    � Accountable and deliver on commitments.

    Responsibility
    � Provide design and drafting expertise to develop, design, construct and start up

    Refinery Projects
    � Working knowledge of Client and Ponca City design standards and processes.
    � Provide assistance to the field coordinators.
    � Support the Front End Loading work process and other best practice project execution.

    Innovation
    � Participate in and support the PSM group and RTS Engineering by using the best practices.

    Teamwork
    � Participate in training opportunities.
    � Network with peers internally to share best practice information.

    Requirements:
    Critical Skills:
    �Strong desire to learn.
    �Able to interact with Contractors.
    �Knowledgeable project and CAD experience.
    �Assoc Degree in Detailed Design preferred

    Leadership Criteria:
    �Contribute to the success of the team and refinery.
    �Accountable and delivers on commitments.
    �Customer focused.
    �Supports creativity, innovation, and continuous improvement
    �Drive company core values.
    �Provides constructive feedback to team members.
    �Ability to balance projects and assignments simultaneously.

    Other:
    Other duties as assigned or deemed necessary.

    FOSTER DESIGN'S BENEFITS:
    � Working for a 48 year old company
    � Minimum 10 Paid Holidays with no waiting period
    � Immediate 401K participation, 1 year 100% vesting schedule, matching employer contribution
    � Free Financial Consultant
    � Medical/Dental/Vision/Prescription card � BCBS
    � MetLife � Long Term Disability Insurance
    � Vacation Pay
    � Per Diem where available
    � Packaged split-out per diem for tax purposes
    � Paid Weekly (Direct Deposit)
    � Referral Bonus Plan
    � Individual Business Cards
     
    Job Number: FD-50918OKPCR
    Job Location: Ponca City, OK
    Rate: $BOE/HR
    Per Diem: Poss
    Overtime: Poss
    Duration: 11 Mos or longer
    Start Date: 05/29/2018
    Input Date: 06/25/2018
    Last Updated: 06/25/2018
    Firm Name: FOSTER DESIGN INC
    Attention: Recruiter
    Address: 200 W DOUGLAS AVE STE 110
    City, State: WICHITA, KS 67202
    Phone: 316/832-9700
    800 Phone: 800/345-3394
    Fax Phone: 316/832-9357
    Website: www.fosterdes.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Project Engineer

    Description:
    We are seeking a experienced Project Engineer for a company here in Covington VA. The Project Engineer’s primary responsibility is to function as the project manager for multiple capital projects across the entire facility. They are responsible for managing their projects from scope development to project closure. Additionally, project engineers provide support to Maintenance and Production to achieve the plant’s safety, reliability, and production goals.



    Responsibilities

    Manage and execute capital projects at the Covington facility. Average project load averages $4-5 million per year with projects ranging from $50k to multi-year projects of $20MM.
    Provide engineering expertise to Operations and Maintenance to help resolve various operating problems.
    Manage all phases of capital and expense repair projects from inception through equipment installation, start-up, and project closure.
    Coordinate with Operations, Maintenance, management and other project stake holders on an ongoing basis.
    Lead all phases of the project process to include: project scopes, cost estimates and schedules, 'Authorization for Expenditure' request forms, preparation of drawings for assigned projects by working with consultants, vendors, and plant personnel, etc.
    Coordinate the different disciplines within the Engineering Department on assigned projects.
    Analyze quotations for equipment and installation labor and recommend suppliers.
    Initiate purchase requisitions for equipment, labor, and materials for assigned capital and repair projects.
    Manage the direction of consultants, contractors, and maintenance work associated with assigned capital and repair projects.
    Manage the financial aspect of assigned capital projects in SAP to ensure budgets are adhered to and assets are properly created and managed.

    Requirements


    Qualifications:

    BS Degree in Engineering with 5+ years related experience with emphasis on project management.
    Interpersonal skills such as building close working relationships and facilitating team discussions are important elements.
    Excellent problem solving and troubleshooting skills.
    Adaptability to rapidly changing working environments and operational situations.
    Excellent time management skills, the ability to create and execute to a budget and deadline, and the ability to make timely decisions.
    Physical ability to operate in a manufacturing environment, including light to moderate lifting, walking and climbing, oral communication, correctable vision, and ability to work in a hot or cold, humid, dusty, outdoor environment.
    Excellent computer literacy in word processing, spreadsheets, electronic mail and presentation graphics, etc. Experience working with SAP and CAD skills are preferred
     
    Job Location: Covington, VA
    Overtime: Yes
    Start Date: ASAP
    Input Date: 05/08/2018
    Last Updated: 06/23/2018
    Firm Name: VELOCITY CONSULTING SOLUTIONS
    Attention: Susan McGlinsey
    Address: 20306 15TH AVE NE STE A
    City, State: SHORELINE, WA 98155
    Phone: 206/812-1061
    Website: www.velocity-cs.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    RF Engineer Level 3

    Description:
    RESPONSIBILITIES: (Requires active clearance)
    Architects and designs Radio Frequency systems and circuitry. Designs and develops RF circuitry used in high frequency and microwave applications, including receivers, transmitters, antennas, and frequency synthesizers. Responsible for hardware layout, component evaluation, prototype construction, and test. Prepares test methods and specifications; analyzes and tests RF hardware to verify performance characteristics. Provides inputs to Product Development for formal documentation and supports manufacturing during the deliverable assembly and test phase. In addition, develops RF System/Subsystem Architectures consisting of: antennas, transmitters, receivers, low noise amplifiers, high power amplifiers, RF conversion elements and transmission line equipment. Performs link analysis and optimization, including effects of propagation medium and possible interference sources. Develops and allocates RF system and subsystem functional and performance requirements. Identifies and tracks RF technical performance measurements (TPMs). Performs RF system/subsystem/component trade studies and CAIV analysis. Supports Life Cycle Costs, reliability, availability, and maintainability analysis. Successful candidate will Perform RF/Analog production support and development work for advanced state-of-the-art receivers, transmitters, antennas, radomes, and anti-jam GPS systems. Design, test, and evaluate RF, analog, and digital hardware and test equipment. Perform computer aided circuit design. Applicant should have some experience with laboratory work/testing and with analog, RF, and digital hardware, including practical experience with network analyzers, logic analyzers, and spectrum analyzers.

    REQUIRED EXPERIENCE:
    RF Board Design experience required. Strong organizational and communication skills. Familiarity with MS Office applications. Problem solving skills.

    PREFERRED EXPERIENCE:
    RF design, digital/analog circuit design, antenna and radome design, test equipment design and programming, Spice, HFSS, ADS, Matlab, Labview, Wireless Communication. Experience with schematic capture and printed wiring board layout using industry tools (Cadence, ORCAD, Mentor Graphics, Zuken CR-5000).

    EDUCATION:
    Accredited High School Diploma/GED

    WORK HOURS:
    9/80, 1st Shift
    Full-Time

    MISCELLANEOUS: Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
     
    Job Number: 170925
    Job Location: Owego, NY
    Rate: $60 to $95.00 DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: 10 mths.
    Start Date: ASAP
    Input Date: 05/30/2018
    Firm Name: CHIPTON ROSS
    Attention: Melody Mullins
    Address: 343 MAIN ST
    City, State: EL SEGUNDO, CA 90245
    Phone: 310/414-7800 X286
    800 Phone: 800/927-9318
    Fax Phone: 310/414-7808
    Website: www.chiptonross.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    RTL & FPGA Design Engineer (Secret Clearance)

    Description:

    Active Secret Clearance REQUIRED


    USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


    Role description & Responsibilities:



    • RTL / FPGA and HW Design Sr. Engineer for tactical missile system development and production programs


     


    Key responsibilities include:



    • The desired candidate will be experienced (5 to 10 years) in RTL coding using VHDL and is proficient with hardware development using state of the art both Xilinx and Altera FPGA development toolsets.

    • Experience with high speed communication ports is a plus.

    • Familiarity with design security features in Xilinx and Altera FPGA are an added plus as are any experience in anti-tamper and cybersecurity implementations.

    • The candidate will also be experienced with the Mentor Graphics EDA toolset for design and simulation of circuits and be familiar with state-of-the-art programmable logic and electronic devices including high speed communication, embedded processors, and DSPs.

    • Experience with the FPGA and HW design process from concept to test and delivery is also required.

    • Hardware test and integration experience in a laboratory environment will include practical usage of a variety of test equipment including Oscilloscopes, Logic Analyzers, and DMMs. Strong knowledge of programming languages including C/C++, as well as Microsoft Office is desired.


     


    Experience and Skill Requirements:



    • Minimum 5 - 10 years of experience in RTL/FPGA and HW product design and development.

    • Direct Digital conversion experience / signal processing hardware experience / Data link experience is a plus.

    • Experience desired in manufacturing support, characterization, test.

    • Ability to use and collect test data using Digital Storage Oscilloscopes, Digital Multimeters, Logic Analyzers, Software Based Debugging tools, In-Circuit Emulators, RF Network Analyzers, Spectrum Analyzers, and signal generators required. Interpretation of RF Test data and radiation patterns desired

    • Familiarity with Mentor PCB Design suite (DxDesigner, Layout, Simulation), Microsoft Office (Word, Excel, Power Point, Outlook, Visio), and CAD tools.

    • Familiarity with Printed Wire Board and Circuit Card Assembly processes (schematic capture, layout, fabrication, assembly) from concept thru design and production and sustaining through end-of-life.

    • BS in Electrical Engineering, MS preferred.


     

















    Compensation



    Benefits



    Diversity/EEO



    The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



    401K Retirement Plan & Medical Insurance is available for candidates who qualify



    USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




     


     













    Partial Aerospace & Defense Client List



    BAE Systems


    Gulfstream Aerospace


    Moog Inc.


    Sikorsky Aircraft - Lockheed Martin


    Orbital ATK


    Rockwell Collins


    Spirit AeroSystems





     
    Job Number: O8243741
    Job Location: Northridge, CA
    Rate: 80-100
    Per Diem: Yes, Split
    Overtime: Some
    Duration: 12 months
    Start Date: ASAP
    Input Date: 05/30/2018
    Last Updated: 06/08/2018
    Firm Name: NESC STAFFING
    Attention: Brad
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    Phone: 603/431-9740
    800 Phone: 800/562-3463
    Fax Phone: 800/637-2562
    Website: www.nesc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior Hardware Engineer (FPGA/PCB)

    Description:
    Working together with the Director of Hardware Engineering you will be required to interpret an existing complex system and troubleshoot root-cause system-level issues as implemented system functions and interfaces evolve.

    This problem-solving candidate will have 8-10 years’ experience with electronic hardware to ramp quickly.

    Required Skills & Experience:

    Must have Digital & Analog (Mixed Signal) Experience
    FPGA experience
    FPGA Development and Test Methodologies
    Read/Write Verilog HDL
    PCB Design and Analysis experience
    Design and Analysis using Cadence Allegro PCB Designer
    Schematic Capture using OrCAD Capture
    Circuit Analysis using OrCAD PSpice Designer
    Product-level design experience from a systems perspective
    Full life cycle from concept to delivery
    High level of experience with system level requirements definition
    Architectural understanding
    Verification and Validation as well bench/lab testing
    Knowledge how to read and write Verilog code
    Experience in scripting with Python and experience with Perl a plus
    Make files and batch files
    Other Specific tools:
    Aldec: Riviera Pro Advance Verification Platform;
    Xilinx: Vivado Design Suite
    Lattice: Diamond Software Tool for FPGA Design
     
    Job Number: 612
    Job Location: Mesa, AZ
    Rate: 65.00
    Per Diem: Possible
    Overtime: Possible
    Duration: CTH
    Start Date: ASAP
    Input Date: 06/13/2018
    Firm Name: ENEA SOFTWARE AND SERVICES
    Attention: Ashley Kaapuni
    Address: 2555 E CAMELBACK RD STE 280
    City, State: PHOENIX, AZ 85016
    Phone: 480/753-9200
    Fax Phone: 480/753-6400
    Website: www.enea.com/services/expertise

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Senior PCB Designer

    Description:
    Description:
    Plans, coordinates and performs designs for complex components and assemblies using the preferred 3-Dimensional (3D) Computer Aided Design (CAD) tool and protocols.
    Uses technical judgment. May work with junior personnel to complete tasks.

    Duties:
    Plans, coordinates and performs design work for complex 3D engineering models and components. Exhibits detailed knowledge of Geometric Dimensioning & Tolerancing (GD&T) Standards and can apply it to many varied situations. Performs as expert user of 3D Computer Aided Design (CAD) system with considerable experience in Top Down design work for complex 3D engineering models and components. May provide document maintenance and have responsibility for placement and routing of electronic circuits. May create Printed Circuit Board (PCB) fabrication drawings, plan PCB projects and create electronic schematic diagrams. Provides modeling leadership and counsel to other employees.

    Specific Position Requirements:
    This position is exclusively a Printed Circuit Board Designer position.

    Required Education: Minimum of two-year technical degree or equivalent experience

    Required Experience: Minimum of 5 years commercial PCB Design.

    Required skills and abilities:
    - Must have intensive knowledge of PCB design.
    - Must have diversified knowledge of the design of testing, manufacturing, quality control, and marketing requirements.
    - Must be able to make decisions independently on PCB design problems and methods.
    - Must use advanced techniques and the modification and extension of theories, precepts, and practices of own field and related sciences and disciplines.
    - Must be able to peer check others work and mentor another PCB Designer.
    - Must have experience with Mentor Expedition software.

    Essential job functions:
    - Reviews documentation necessary for PCB development generated by other engineering groups and verifies this documentation is sufficient for PCB design. Generates, coordinates, and ensures completion of support documents as necessary. Generates and maintains PCB specifications.
    - Train engineers in schematic capture.
    - Train PCB designers in Mentor Graphics Expedition software.
    - Creation and maintenance of CAD library.
    - Working with other engineering personnel, establishes design parameters and ensures electronic designs comply with Design Validation specifications and product specifications. - - Works with Manufacturing Engineering and outside vendors to identify and rectify fabrication, component, or assembly problems.
    - Works with Manufacturing Engineering, Sales and Marketing, and Quality Assurance to optimize designs for cost, quality, and manufacturability.
    - Designs Printed Circuit board layouts based on engineering requirements and industry related experience

    Preferred Tool Experience:
    - Mentor Graphics Design Capture, version 7.9.5
    - Mentor Graphics DX Designer
    - Mentor Graphics Expedition
     
    Job Number: 18-09462
    Job Location: Fargo, ND
    Rate: Open
    Per Diem: Yes
    Overtime: Possible
    Duration: 13 Months
    Start Date: ASAP
    Input Date: 06/05/2018
    Firm Name: ICONMA LLC
    Attention: Pratap Singh
    Address: 1201 PACIFIC AVE STE 600
    City, State: TACOMA, WA 98402
    Phone: 253/213-2012
    Website: www.iconma.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SolidWorks Engineer

    Description:
    We're seeking a Mechanical Engineer that knows how to use SolidWorks in developing Compressors, Mirrors, Horns and possibly some interior plastic components too.

    Our client is seeking for some immediate help for about 2-4 months with a possible extension depending on project load and up coming programs. This position is working on a new program and have an immediate need for a SolidWorks CAD/Design person that is well versed in SolidWorks and have some experience in FEA analysis, bills of material, project timing and design of mechanical parts.
     
    Job Number: 3475
    Job Location: Portland, ORE
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 2-4 months
    Start Date: ASAP
    Input Date: 06/04/2018
    Firm Name: OLSA RESOURCES INC
    Attention: Dina
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    SolidWorks Engineer

    Description:
    We're seeking a Mechanical Engineer that knows how to use SolidWorks in developing Compressors, Mirrors, Horns and possibly some interior plastic components too.

    Our client is seeking for some immediate help for about 2-4 months with a possible extension depending on project load and up coming programs. This position is working on a new program and have an immediate need for a SolidWorks CAD/Design person that is well versed in SolidWorks and have some experience in FEA analysis, bills of material, project timing and design of mechanical parts.
     
    Job Number: 3475-1
    Job Location: Detroit, MI
    Rate: DOE
    Per Diem: Possible
    Overtime: Possible
    Duration: 2-4 months
    Start Date: ASAP
    Input Date: 06/04/2018
    Firm Name: OLSA RESOURCES INC
    Attention: Dina
    Address: 3836 N BALLAST ST
    City, State: PORTLAND, OR 97217
    Phone: 503/608-7895
    Fax Phone: 503/608-7896
    Website: www.olsaresources.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Solidworks Designer

    Description:
    Temp to hire opportunity for a Mechanical Designer to prepare complex layouts, parts, assemblies and detail drawings for custom cryogenic products and R&D builds. Process and transform preliminary technical packages into working documents for manufacturing release. Review completed technical packages for accuracy.



    Required Skills:

    • Associates Degree or Technical Trade School graduate in Cad-based studies

    • Four years+ work related experience.

    • Proficient in using current versions of SolidWorks and AutoCAD,

    • Ability to provide high throughput of modeling and detailing of technical packages.

    • Skilled in good drafting practices and techniques outlined in ANSI Standards and publications such as the Global DRM.

    • Solid understanding of engineering practices such as, form fit & function, rules of interchangeability, tolerance stack up analysis

    • Very good understanding of managing SolidWorks files, Workgroup PDM, Enterprise PDM, BOM structures, documentation control and configuration management.

    • Working knowledge of entering BOM\'s into an MRP system.

    • Practical understanding of:

      • Vacuum technology

      • Fabrication techniques

      • Machining techniques

      • Materials






    Desired Background:


    • Bachelor\'s Degree in Mechanical Engineering

    • Cryogenics and Liquid Helium systems design

    • Vibration principles

    • Hands on Machine Shop experience



     
    Job Number: 18-22182
    Job Location: Woburn, MA
    Rate: 43.0USD/Hour
    Per Diem: --
    Overtime: --
    Start Date: 2018-05-30 00:00:00.0
    Input Date: 05/30/2018
    Last Updated: 07/18/2018
    Firm Name: NESCO RESOURCE
    Attention: Kevin Spillane
    Address: 101 COMMERCE ST STE 3001
    City, State: LAKE MARY, FL 32746
    Phone: 407/710-8000
    Fax Phone: 407/710-8001
    Website: www.nescoresource.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr Analyst

    Description:
    Senior Analyst

    Location: Farmington, CT
    Pay Rate: DOE
    Duration: 6+ Month W2 Contract
    Shift: First
    **MUST be a U.S. CITIZEN; NO DUAL CITIZENSHIP**


    Job Description

    This company is seeking a Senior Analyst to join its International Trade Compliance (ITC) Corporate team. The candidate will work with ITC professionals from Company's Major Operating Units (MOUs) as well as other compliance professionals across Company to build and sustain a world-class compliance program.

    Duties include:
    Collect, prepare and analyze metrics and present in a manner that displays areas of opportunities, visually pleasing, with key take-aways to senior level management. Must be able to review, trend, and communicate the data and findings clearly.

    Automate manual processes includes training, community and overall program metrics.

    Prepare and deploy creative communications and regular newsletters to the ITC community.

    Must be able to prepare and deliver executive level communications and briefings.

    Create intuitive instructions, quick reference guides and standard work for the user community.

    Create and maintain program tracker for Company led initiatives

    Follow up on MOU deliverables, status and track to completion.

    Development of a cadence to ensure the projects remain on schedule

    Support Data Privacy self-assessment and inventory processes

    Support monthly ITC Councils, Quarterly Operating Reviews and re-occurring meetings by capturing action items, meeting minutes, follow up and closure of those as well as a consolidated tracking mechanism.

    Provide key support in ad-hoc projects specific to enhancing and building our ITC infrastructure.

    Create and deliver training using Storyline Software.

    Create Total Productive Maintenance (TPM) process for regular review and updates of our corporate policies and procedures.

    Create process to document and capture policy and procedure exceptions. Be able to review and trend the data.

    Preferred Qualifications:
    Attention to detail a must
    IT / data analytics background preferred to assist with metrics and automation
    Ability to communicate both written and verbal in a clear and straightforward manner with excellent interpersonal skills. Also, demonstrated ability to handle multiple projects and tasks with clear prioritization and organization.
    Shown strength in project management
    Shown skill with project leadership, methods and tools
    Demonstrated ability to lead and coordinate with cross-functional teams
    Shown skill to communicate to a broad audience including Executives
    Demonstrated ability to create training/reference documentation and deliver hands-on training
    Demonstrated proficiency with MS Office products, high proficiency with PowerPoint, Excel, Project, Visio, and Word.
    Articulate / Storyline Software experience helpful (10-30%).
    Technical background within aerospace manufacturing /engineering preferred but not required.
    Familiarity with U.S. export and import regulations preferred.

    *Education / Certifications
    Bachelor’s Degree in Business, Information Technology, Engineering, or Operations, or related field required with 2 to 4 years of experience.
    MA/MS degree in Business Administration, Project Management or Information Technology or related field with 1-2 years of experience.
    PMP Certification preferred
     
    Job Number: 9083
    Job Location: Farmington, CT
    Rate: DOE
    Per Diem: No
    Overtime: Possible
    Duration: 6 Mos
    Start Date: ASAP
    Input Date: 05/08/2018
    Last Updated: 07/18/2018
    Firm Name: INCONEN CORPORATION
    Attention: Rex
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr Composite Design Engineer (Secret Clearance)

    Description:

    Active Secret Clearance REQUIRED


    USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


    Overview:


    Composite Structural Design Engineer experienced in designing composite structures and assemblies for military and/or commercial aircraft with assembly level design including establishment of data schemes and tolerance analysis.


    Experience is design of laminates, sandwich structures, and bonded and bolted assemblies


     


    Role description & Responsibilities:


    Highly motivated design engineer with experience designing composite structures and assemblies for military and/or commercial aircraft.


    Responsibilities include but are not limited to the design of laminates, sandwich structures, and bonded and bolted assemblies.


    Skills should include relationally linked modeling, establishing datum schemes for assemblies, and performing tolerance stackup analysis.


     


    Experience Requirements:


    Minimum of 10 years related experience in design engineering function


    Minimum of 6 years of experience with Siemens NX or Catia V5 for component and assembly design


    Experience leading a team of engineers


    Assembly level design including establishment of data schemes and tolerance analysis


    Knowledge of composite materials and manufacturing processes


     


    Experience Preferred:


    Definition of layups and ply patterns with Fibersim


    CAD automation, programming, script writing


    Previous experience in aerospace manufacturing facility


     


    Education/Certifications:


    BS degree in Civil, Mechanical, Aerospace Engineering, or related


     


     

















    Compensation



    Benefits



    Diversity/EEO



    The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



    401K Retirement Plan & Medical Insurance is available for candidates who qualify



    USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




     


     













    Partial Aerospace & Defense Client List



    BAE Systems


    Gulfstream Aerospace


    Moog Inc.


    Sikorsky Aircraft - Lockheed Martin


    Orbital ATK


    Rockwell Collins


    Spirit AeroSystems




     
    Job Number: O8024350
    Job Location: Clearfield, UT
    Rate: 75-85
    Per Diem: Yes, Split
    Overtime: Yes, 20+ hours/week
    Duration: 1 year+
    Start Date: ASAP
    Input Date: 05/30/2018
    Last Updated: 06/08/2018
    Firm Name: NESC STAFFING
    Attention: Brad
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    Phone: 603/431-9740
    800 Phone: 800/562-3463
    Fax Phone: 800/637-2562
    Website: www.nesc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Sr. Analog and Digital Engineer (Secret Clearance)

    Description:

    Active Secret Clearance REQUIRED


    USPRO is woman-owned and operated contract staffing agency that places talented individuals nationwide in the following industries: Aerospace & Defense, Manufacturing & Healthcare. Learn more at www.uspro.net ____________________________________________________________________


    Role description & Responsibilities:



    • Analog and Digital Sr. Engineer for tactical missile system development and production programs


     


    Key responsibilities include:



    • Active DoD Secret Clearance

    • Experience with Missile hardware design, range safety, telemetry and flight terminations systems highly desired.

    • Develops, coordinates and conducts Analog, Power and Digital designs and evaluations of engineering design concepts. Which includes FPGAs with high speed interface.

    • Create Analog, Power and Digital designs simulation models using computer modeling tools.

    • Creates test plans and procedures for a variety of circuit card, environmental testing and Electrical System Integration.

    • Oversees or participates in hardware and integration in a laboratory environment testing.

    • Identifies opportunities for improvement based on review of failure data and supports development and implementation of component design improvements or updates.

    • Supports design reviews and test activities, as needed. Supports subcontractor evaluation, selection and coordination activities with respect to Analog, Power and Digital needs.


     


    Experience and Skill Requirements:



    • Minimum 7-10 years of experience in Analog, Power and Digital product design and development.

    • Safety engineering knowledge desired.

    • Proven hands on design experience of board level and system level products.

    • Experience with Open System Architecture

    • Direct Digital conversion experience / signal processing hardware experience / Data link experience is a plus.

    • Experience desired in manufacturing support, characterization, test.

    • Ability to use and collect test data using Digital Storage Oscilloscopes, Digital Multimeters, Logic Analyzers, Software Based Debugging tools, In-Circuit Emulators, RF Network Analyzers, Spectrum Analyzers, and signal generators is a plus.

    • Ability to read and interpret military requirements, specifications, and Engineering drawings/schematics.

    • Familiarity with Mentor PCB Design suite (DxDesigner, Layout, Simulation, Hyper lynx), Microsoft Office (Word, Excel, Power Point, Outlook, Visio), and CAD tools and Matlab.

    • Familiarity with Printed Wire Board and Circuit Card Assembly processes (schematic capture, layout, fabrication, assembly) from concept thru design and production and sustaining through end-of-life.

    • BS in Electrical Engineering required, MS preferred.

















    Compensation



    Benefits



    Diversity/EEO



    The mentioned pay rate range for this opportunity is the 'target' range set by our client. Although USPRO presents candidates to our clients regardless of what their compensation demands are, the higher your rate is above this range, the lower the chance is for consideration



    401K Retirement Plan & Medical Insurance is available for candidates who qualify



    USPRO is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees!




     













    Partial Aerospace & Defense Client List



    BAE Systems


    Gulfstream Aerospace


    Moog Inc.


    Sikorsky Aircraft - Lockheed Martin


    Orbital ATK


    Rockwell Collins


    Spirit AeroSystems




     
    Job Number: O8243198
    Job Location: Northridge, CA
    Rate: 80-100
    Per Diem: Yes, Split
    Overtime: Some
    Duration: 12 months
    Start Date: ASAP
    Input Date: 05/30/2018
    Last Updated: 06/08/2018
    Firm Name: NESC STAFFING
    Attention: Brad
    Address: 150 MIRONA RD
    City, State: PORTSMOUTH, NH 03801
    Phone: 603/431-9740
    800 Phone: 800/562-3463
    Fax Phone: 800/637-2562
    Website: www.nesc.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Design Engineer

    Description:
    Conceptual Structural Design Engineer who is proficient in aircraft conceptual and preliminary structural design, layout, and sizing. The position is within the fast paced and wide reaching Advanced Design team. Familiarity, and willingness to learn, with all speed regimes (subsonic, supersonic, hypersonic) and vehicle configurations (general aviation, fighters, helicopters, spacecraft) is highly recommended. Ultimately responsible for providing initial program direction on structures with appropriate level of fidelity and manufacturing considerations in mind.
    Plays an integral role in all structural designs for the Advanced Design team
    Perform aircraft conceptual and preliminary structural design and analysis
    Perform trade studies (weight, performance, structural sizing)
    Coordinate with the structural design and stress analyst teams on guidance of proper analysis methods.
    Reviews, updates, and compiles engineering analytical definition of structural components and assemblies for a variety of projects
    Supports development of manufacturing plans and procedures to ensure compliance with design and loads requirements
    Supports the creation of structural test plans which will be used to verify manufacturing
    Perform customer presentations, engineering reports, specifications and proposal writing
    Requirements
    Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline
    Prefer 7+ years of experience in aircraft conceptual and preliminary design
    Experience in aircraft or spacecraft composite fabrication, design, and analysis processes
    CAD experience (CATIA V5 and/or SolidWorks) is preferred
    Knowledge of composites manufacturing -- hands-on experience with composites part fabrication and assembly processes a plus.
    Experience in the analysis of structural systems using strength of materials and finite element based methods
    Experience with free-body diagrams and classical stress analysis techniques
    Knowledge of composite structural analysis and sizing using classical and finite element methods
    Experience with composite finite element modeling including pre and post processing of NASTRAN models -- proficiency in FEMAP a plus
    Pilot, aircraft homebuilding and rapid prototyping experience a strong plus
    Excellent verbal and written communication skills
    Excellent organizational skills and problem-solving skills
    Strong team player
    Excels in a fast-paced environment with loosely defined problems
    Excellent computer skills, including Outlook, Word, Excel and PowerPoint
    Applicants must be “U.S. persons” as defined by the ITAR (22 CFR §120.15)


    The Structures Company is an AA/EOE.
     
    Job Number: 192
    Job Location: Mojave, CA
    Rate: $65.00-DOE
    Per Diem: Yes
    Duration: 9+ Month
    Start Date: ASAP
    Input Date: 09/19/2018
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    Composite Structural Design/CPD/Composite Workbench

    Description:
    Description:
    Perform preliminary and detail design of composite structures, structure layout and design for manufacturability.
    Create 3D/2D definition of parts, assemblies and installations.
    CATIA V5, CPD/Composites workbench is required
    MUST BE US PERSON
    Establish manufacturing tolerances for production of structural components using GD&T.
    Participate in the Engineering definition review, approval and release process
    Support the review of manufacturing plans and procedures to ensure compliance with design requirements
    Support the creation of structural test plans which will be used to verify manufacturing processes meet design intent and requirements.

    The Structures Company LLC is an AA/EOE.
    The Structures Company is an AA/EOE.
     
    Job Number: 193
    Job Location: Mojave, CA
    Rate: $60- $70.00-DOE
    Per Diem: Yes
    Overtime: Yes
    Duration: Long-term
    Start Date: ASAP
    Input Date: 10/22/2018
    Last Updated: 11/16/2018
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Email: debbieaubert@thestructurescompany.com
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structural Design with active secret / Catia V5 CA

    Description:
    160829
    Requirement#AERO-REQ-0732
    Work Location Palmdale, CA (1011 Lockheed Way, Palmdale, CA 93599)
    Work Week9/80-A
    PriorityHigh
    Needed Date01/09/2018
    End Date01/09/2019
    Number of Resources1
    Security ClearanceSecret

    TitleStructural Design-N
    Description
    Design of structural detail parts, assemblies and installations, as well as, systems installations for aircraft. Engineer shall be responsible for development of layouts, preparation of engineering drawings, planning, scheduling, and coordination of activities of assigned subordinate engineers, and support of manufacturing operations and customers in resolving technical problems related to the aircraft structure and systems. Candidate must be able to coordinate efforts with little or no supervision across a wide range of functional organizations, such as Planning, Tooling, Stress, M&P, R&M, Material, Flight Sciences, Test, Manufacturing, and other Design IPTs to ensure that designs meet customer and derived requirements. Candidate must have aerospace design experience with knowledge of configuration management techniques, drafting/drawing conventions, and aerospace specifications and procedures.
    Skill/Experience/Education
    Mandatory:

    Active Secret security clearance.--

    This position is located at a facility that requires special access----Proficient with CATIA V5--Understanding of drawing practices, material properties, and manufacturing processes
    Desired:

    Proficiency with Microsoft Office suite (Word, PowerPoint, Excel, Outlook), Windows Bachelor OR Above Degree in a Engineering Technical Discipline--5 or more years experience in the design of aircraft structures

    Skill Matrix
    Skill Name Description Level (1-5, 5 being the highest)
    1 2 3 4 5 Years Mandatory(Yes/No)
    CATIA V5 Proficiency in CAD software CATIA V5 4-5 Years Yes
    Aircraft Structural Design Proficient with aircraft structural design of composite and metallic parts 4-5 Years Yes



    Interview Required
    OT Allowed
    Non-Exempt
    Rate TypePer Hour
    Rates
    5-8 YrsPay Rate: 90.00 USD
    9+ YrsPay Rate: 95.00 USD
     
    Job Number: JE-0732
    Job Location: Palmdale, CA
    Rate: 90-95/hr max
    Per Diem: no
    Duration: 12 month contract
    Input Date: 06/28/2018
    Last Updated: 07/02/2018
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Structure and Survivability Design Engineer

    Description:
    US CITIZENSHIP REQUIRED

    A Structure and Survivability Design Engineer is needed to assist in the design and development of ground combat vehicle structures, armor and spall liner.

    Specific work will include:

    -Design of weld joints for steel and aluminum structures
    -Develop engineering design concepts via CAD software
    -Assist lead engineers on the design of structures, appendages, armor and spall liner for various military vehicle platforms
    -Work with design services (drafting) to create detailed drawings
    -Provide technical support to other engineering organizations
    -Address manufacturing, procurement and field problem reports
    -Present design concepts and program status to functional and program management

    Required B.S. in Mechanical Engineering
     
    Job Number: 42101
    Job Location: Sterling Heights, MI
    Rate: Open
    Per Diem: Split
    Overtime: Pos
    Duration: 1 year
    Start Date: ASAP
    Input Date: 06/05/2018
    Firm Name: PANTHER GROUP
    Attention: Bob
    Address: 5 MILL AND MAIN PL STE 430
    City, State: MAYNARD, MA 01754
    Phone: 781/790-7900
    800 Phone: 800/776-0562
    Fax Phone: 781/672-2570
    Website: www.thepanthergrp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Systems Engineering Specialist

    Description:
    Do you have 10 years of engineering experience? Do you have knowledge and experience working with simulating systems in Matlab and Simulink? Apply to become a Systems Engineering Specialist with one of our top clients in the aerospace industry today!

    The ideal candidate for this position will perform the following tasks:
    * Responsible for engine and transmission system performance modeling, vehicle performance modeling, and component performance modeling.
    * Responsible to allocate and derive requirements from vehicle, engine, and transmission system level down to the component level using a systems simulation model in Excel, Matlab, Simulink, or other software.
    * Technical lead of cross-functional matrixed project team (ME, EE, Software, etc.) for engineering projects through the Systems Requirements Review to ensure engineering requirements are met.
    * Mentor and trainer of other engineers for Systems Engineering related simulations and activities.
    * Improve and document the L3 Systems Engineering Process with processes, document templates, or modeling standards.
    * Author engineering technical reports for submission to the customer.
    * Participate or lead new engine and transmission proposals.
    * Provide input to product specifications and design verification test plans to ensure that they adequately captures all data to assess requirements compliance.

    Mandatory Qualifications and Experience:
    * Bachelor's degree in Systems Engineering, Mechanical Engineering, Electrical Engineering, Physics, or equivalent technical BS degree with 10-14 years engineering experience.
    * At least 2 years experience working as a Systems Engineer (10 years engineering experience overall).
    * Experience with simulating systems in Matlab and Simulink.
    * Knowledge of transmission, engine, and vehicle performance and understanding of powerpack integration into vehicles.
    * Engineering knowledge of mechanics; hydraulics; powertrain parts such as gears housings, and shafts; knowledge of performance parameters such as speed, RPM, torque, power and gear ratios.
    * Ability to obtain a security clearance.
    * Must be able to move freely, with or without reasonable accommodation, throughout a manufacturing environment.

    Desired Qualifications and Experience:
    * Master’s degree in Systems Engineering.
    * Experience with Rational Dynamic Object Oriented Requirements System (DOORS) software or equivalent.
    * Expert product knowledge of transmissions, engines, and powerpack integration into tracked vehicles.
    * An understanding of working with CAD models and programs in Pro E (Creo).
    * Experience in developing products for the defense industry.

    The ideal candidate for this position will possess the following skills and characteristics:
    * Highly organized and able to multitask on many different projects at once.
    * Proven ability to make technical decisions, complete project objectives within budget and schedule, and work with little supervision.
    * Proven ability to work well with others in a cross-functional environment while working on multiple projects.
    * Ability to utilize all Microsoft Office applications including Word, Excel, Powerpoint, and Project.
    * Excellent written and verbal communication, and the ability to write and review technical reports.

    Benefits: Visit http://www.teamglobal.com/benefits.html for more details.
     
    Job Number: 127851
    Job Location: Muskegon, MI
    Start Date: 06/18/2018
    Input Date: 06/12/2018
    Last Updated: 06/18/2018
    Firm Name: GLOBAL CONTRACT PROFESSIONALS
    Attention: GCP Recruiter
    Address: P O BOX 161127
    City, State: FORT WORTH, TX 76161-1127
    Phone: 817/847-6673
    800 Phone: 800/942-2376
    Fax Phone: 817/847-9444
    Website: www.teamglobal.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Design 3

    Description:
    Be a part of the world's largest aerospace company and leading manufacturer of commercial jetliners and defense, space and security systems. If you take pride in your work, want a challenge that inspires your best ideas, and enjoy being part of a winning team, this is the place for you.

    We are currently searching for the right talent to fill this opportunity:

    Technical Design 3
    (U.S. Citizenship Required*)
    Oklahoma City, OK
    2018-6193

    Responsibilities:
    • Use manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition.
    • Prepare design layouts and modify existing designs to satisfy customer and production requirements.
    • Assist developing product definition based on applicable standards, requirements, and design parameters.
    • Develop statements of work, including design requirements, cost & schedule estimates.
    • Coordinate and develop work transfer packages.
    • Contribute to the integration of product definition across internal & external business partners to provide a functional end-product.
    • Investigate and resolve moderately-complex manufacturing process or engineering related issues.
    • Verify accuracy of non-technical data produced by others.
    • Support development of new processes by providing input on detailed aspects of the process.
    • Mentor less experienced personnel. Work under general direction.

    Qualification:
    • Required – Able to obtain Secret clearance
    *U.S. Citizenship is required by law, regulation, executive order, or government contract.

    Education and Experience:
    • AA degree in related discipline and typically 3 or more years of related experience or an equivalent combination of education and experience.

    Conditions of Employment:
    Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.

    About Our Company:
    Moseley Technical Services, Inc. is dedicated to providing our clients with a high standard of quality products and services. For two decades, our reputation has been built on this dedication and the long-term relationships developed with some of the most prestigious companies in the aerospace and defense industries. These business relationships give you the opportunity to not only find a job, but to find one you can value and enjoy. We will be dedicated to you and to making your career a success.

    Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.

    Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.

    Join a team that values your experience!
     
    Job Number: 2018-6193
    Job Location: Oklahoma City, OK
    Rate: Based on experience
    Duration: 12 Months
    Input Date: 06/13/2018
    Firm Name: MOSELEY TECHNICAL SERVICES INC
    Attention: Saralynn Halsey
    Address: 7500 S MEMORIAL PKWY STE 215-R
    City, State: HUNTSVILLE, AL 35802
    Phone: 256/880-0446
    Fax Phone: 256/880-0936
    Website: www.moseleytechnical.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Technical Designer III & IV (Oklahoma City, OK)

    Description:
    SEVERAL OPENINGS IN THE OKLAHOMA CITY, OK AREA.

    Active Secret Clearance, NOT required to start.

    Uses manual or Computer Aided Design (CAD) tools, to develop and maintain mechanical/structural engineering product definition. Prepares design layouts and modifies existing designs to satisfy customer and production requirements. Assists in the development of product definition based on applicable standards, requirements and design parameters. Develops statements of work, including design requirements, cost and schedule estimates. Coordinates and develops work transfer packages. Contributes to the integration of product definition across internal and external business partners to provide a functional end-product. Investigates and resolves moderately-complex manufacturing process or engineering related issues. Verifies accuracy of non-technical data produced by others. Supports development of new processes by providing input on detailed aspects of the process. Mentors less experienced personnel.

    AA degree in related discipline and typically 3-7 or more years of related experience or an equivalent combination of education and experience.

    CATIA V5, Enovia.

    ACS Group (formerly 'Comforce')
     
    Job Number: DesignOK
    Job Location: Oklahoma City, OK
    Rate: OPEN
    Per Diem: YES
    Overtime: Possible
    Duration: 12+ Months
    Start Date: ASAP
    Input Date: 08/15/2018
    Last Updated: 09/21/2018
    Firm Name: AMERICAN CYBERSYSTEMS
    Attention: Janice Plattner
    Address: 1750 112TH AVE NE STE C228
    City, State: BELLEVUE, WA 98004
    Phone: 425/605-2321
    Fax Phone: 425/558-0688
    Website: www.acsicorp.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Airframe Design Engineer / NX Fibersim / composite components for aerospace CA

    Description:
    161524/17467

    Title Temp Airframe Design Engineer

    Job Summary

    We have an exciting opportunity for an Airframe Engineer within our Airframe Design Group. This is an airframe design and analysis position in the Advanced Aircraft Engineering Organization located in San Diego, CA. Under the general direction of Engineering management or IPT lead, serve as a member of the airframe design team providing conceptual and detail designs of primary and secondary structural aircraft components. General responsibilities include leading and coordinating the design activities of a team of 1-5 engineers within an assigned project. Establish and communicate clear task expectations. Primary product lines for design activities will be unmanned aerial vehicles, modification of existing aircraft structures and special projects to support sensor integrations.

    DUTIES AND RESPONSIBILITIES:
    •Able to self-prioritize tasks. Works under general direction
    •Produce airframe structural configuration layouts and detail designs including preliminary sizing/stress analysis, joint layouts, interface boundary definitions of parts and assemblies employing metallic and composite materials.
    •Create and maintain CAD solid models and drawings of installations, assembly and detail components that meet all requirements such as structural integrity, interface boundaries, weight and cost targets as directed by the project engineer.
    •Periodically review and check the product structure and BOM’s of the team to insure fit, form, function of the structural components is maintained.
    •Conduct periodic design reviews as required to ensure designs meet the requirements.
    •Coordinate and collaborate with members of stress, manufacturing, procurement, quality control and other departments as required to mature the design from conception to production.  
    •Create and maintain documentation that tracks team weekly progress status as it related to the Program budget and deadlines.
    •Prepare PowerPoint presentations to support Program PDRs and CDRs.
    Provide technical support and mentorship to those less experience members of the team.

    Qualifications Essential Qualifications
    Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

    Demonstrates an extensive technical expertise and application of engineering principles, concepts, theory, and practice with the ability to organize, plan, schedule, conduct, and coordinate workloads to meet established deadlines or milestones with some experience in project leadership.
    Must possess the ability to understand new concepts quickly and apply them accurately throughout an evolving environment.
    Strong communication, presentation, and interpersonal skills are required enabling an effective interface with other departments and/or professionals, and capable of representing the organization as a prime technical contact, as well as providing leadership and guidance to less experienced professionals.
    Customer focused, formulates plans based on the development of innovative new designs in resolving advanced technical engineering problems.
    Must be able to work both independently and in a team environment.
    Able to work extended hours as required.
    A Professional Engineering License, original work(s) published in professional engineering journals, and invited to present one or more original works to an engineering symposium are desirable.

    Additional Qualifications - Typically requires a bachelors degree, masters degree or PhD in engineering or a related technical discipline from an accredited institution and progressive engineering experience as follows; nine or more years of experience with a bachelors degree, seven or more years of experience with a masters degree, or four or more years with a PhD. May substitute equivalent engineering experience in lieu of education.

    - Experience with the composite part detail process, including composites stacking sequence, lamination theory, honeycomb core, bonded assemblies, manufacturing assembly and fabrication processes, post-cure machining operations desired.

    - Familiar with industry standards for the manufacture, repair and assembly of composite components for aerospace.

    - Experience with NX and FiberSIM highly desired

    City San Diego
    State California
    Travel Percentage Required 0% - 25%
    Clearance Required? No
    Work Schedule Rule 9/80
    SCA Contract? No
    Temp Assignment Duration (# of Days) 180
     
    Job Number: JE-17467
    Job Location: San Diego, CA
    Rate: 60/hr max
    Per Diem: no
    Duration: 6 months +
    Input Date: 07/24/2018
    Last Updated: 08/30/2018
    Firm Name: MIDCOM CORPORATION
    Attention: Jeana Edrozo
    Address: 1275 N MANASSERO ST
    City, State: ANAHEIM, CA 92807
    Phone: 714/630-1999
    800 Phone: 800/737-1632
    Fax Phone: 714/459-7055
    Website: www.midcom.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Test Engineer

    Description:
    Seeking an experienced test engineer to support testing of mechanical systems and avionics components, assemblies, and integrated systems. The main tasks of this role are to define test requirements with internal customers, write test plans, design test stands and execute tests under the direction of the Engineering lead and/or Manager. Engineers in this position are expected to have knowledge of industry standard test practices and methods as well as engineering skills in design and analysis to required to develop custom tests.


    Your Mission
    Design tests plans and equipment for validation of complex mechanical or structural components and systems.
    Write test plans and procedures to define and support execution of tests.
    Interface with internal customers on integrated program teams to establish and verify specific test requirements.
    Work with support teams and vendors to procure, manufacture and assemble test articles and test stand hardware and equipment.
    Analyze test data to verify test requirements and write test reports to document test results.
    Interface with external test laboratories to facilitate testing for design and analysis teams.
    Participate in the test engineering review, approval and release process.
    Participate in the continuous improvement of testing practices, including test processes, lab procedures and lab technology implementation.

    What you bring
    Bachelor’s degree from an accredited institution, with a concentration in a relevant Engineering discipline.
    4-8 years’ or more experience in aerospace with an emphasis on testing or equivalent laboratory test engineering experience
    CAD modelling experience – Experience with Catia V5 preferred
    Experience with simulation and finite element analysis preferred – NASTRAN, Femap
    Experience with DO-160 environmental test standards for mechanical systems
    Experience with the design of flight vehicles or vehicle systems to a set of requirements or standards such as CFR 14, Part 400, Part 23 and 25, military or NASA are highly desired
    Focus on safety and reliability in testing.
    Results oriented approach to completing test activities successfully.
    Excellent verbal and written communication skills
    Excellent Organizational Skills and problem-solving skills
    Strong team player.
    Excellent computer skills, including Outlook, Word, Excel and PowerPoint


    ITAR Requirements
    Applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15) or eligible to obtain the required authorizations from the U.S. Department of State.

    The Structures Company is an AA/EOE.
     
    Job Number: 3893
    Job Location: Mojave, CA
    Per Diem: Yes
    Duration: 9+ Month
    Start Date: ASAP
    Input Date: 07/03/2018
    Last Updated: 08/01/2018
    Firm Name: STRUCTURES COMPANY LLC
    Attention: Debbie Aubert
    Address: P O BOX 2278
    City, State: SEAL BEACH, CA 90740
    Phone: 714/823-3000
    Website: www.thestructurescompany.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Eng III

    Description:
    Tool Design Eng III
    Savannah, GA
    Rate: $60.00/HR

    Unique Skills:

    Must be proficient in Catia V5


    Education and Experience Requirements:

    Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.


    Position Purpose:
    Performs engineering work related to the design of complex tools and equipment used in the manufacture and support of Gulfstream aircraft.

    Principle Duties and Responsibilities:

    Essential Functions: 1. Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft. 2. Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures. 3. Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers. 4. Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures. 5. Write complex procedures on use of tools. 6. May act as Team Leader, assigning work tasks, maintaining work load schedules, and setting priorities to ensure timely completion of department goals and corporate objectives.

    Additional Functions: 1. Actively works to improve daily processes, and ensures all work meets customer requirements. 2. Assist Tool shop as needed, during Periodic and Conformity Inspections. 3. Assist in formulating Tool Design policies, procedures, and specifications as required. Perform other duties as assigned.

    Other Requirements: 1. Must possess excellent CAD/CATIA modeling skills, have a strong understanding of GD&T. 2. Demonstrated knowledge of materials, material strengths, heat treat method and uses. 3. Ability to conceptualize the following with little or no supervision. Assembly tooling, Composite tooling, Machine tooling, handling equipment, and scaffolding.
     
    Job Number: 9214
    Job Location: Savannah, GA
    Rate: $60.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: LT
    Start Date: ASAP
    Input Date: 05/24/2018
    Last Updated: 07/10/2018
    Firm Name: INCONEN CORPORATION
    Attention: Cathy O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Design Engineer - TV

    Description:
    QUALIFICATIONS:
    • A Bachelor of Science degree or a Technical Degree and extensive Toolmaking/Design work experience.
    • Basic knowledge of thermoplastic material properties and processing, basic tool design principles, and tool trouble shooting.
    • Parametric Solids CAD/CAM experience. SolidWorks preferred.
    • Knowledge of metal forming and machining practices including CNC programming, CNC processes, materials, heat treatment, and broad general manufacturing processes.
    • PC use including Microsoft office, project, Share point, etc.  Familiarity with PDM systems and file management, FMEA, FEA, DFSS, mold fill/cool/stress analysis is preferred.
     
    JOB SUMMARY:
    The Tool Design Engineer will work collaboratively with other functional groups within the organization to provide technical expertise related to “Tooling”.  This is to support the development of new products, improvements in existing products, cost reductions, and quality improvements related to “Tooling”.  This would include but not be limited to injection mold and fixture design, tool manufacturing, all related tool designs and drawings, piece part models and documentation of all electronic data.  Utilization and coordination of both internal and external tooling and machining resources will be required.  This position will primarily support North American operations and as needed support worldwide operations.
     
     
    Job Number: 61120182TV
    Job Location: MN
    Duration: Direct Hire
    Input Date: 06/12/2018
    Firm Name: ENTEGEE ENGINEERING TECHNICAL GROUP
    Attention: Terry Valliere
    Address: 5620 INTERNATIONAL PKWY
    City, State: NEW HOPE, MN 55428-3047
    Phone: 763/577-9000
    Fax Phone: 763/577-9010
    Website: www.entegee.com

    Tool Design Engineer III

    Description:
    Perform engineering work related to the design of tools and equipment used in the manufacture and support of aircraft.

    UNIQUE SKILLS
    • Must be proficient in Catia V5

    PRINCIPAL DUTIES AND RESPONSIBILITIES
    • Under minimal supervision, design, tolerance and annotate tooling in 3D CAD environment that will be used in the manufacture and support of Gulfstream aircraft.
    • Collaborate with engineering, manufacturing engineering and operations to determine optimal manufacturing procedures.
    • Present design concepts to a design review team composed of representatives from manufacturing engineering, industrial engineering, operations, safety and other Tool Design Engineers.
    • Review and check Tool Designs, as required, to ensure conformance to specifications, intent, methods and procedures.
    • Write procedures on use of tools.
    • Assist Tool shop as needed, during Periodic and Conformity Inspections.
    • Assist in formulating Tool Design policies, procedures, and specifications as required.

    EDUCATION AND EXPERIENCE REQUIREMENTS
    • Bachelor's Degree in Mechanical Engineering, a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
    • Four (4) years drafting/design experience to include documented experience in a tool or machine shop environment. Tool Design experience required.
     
    Job Number: 24-289
    Job Location: Savannah, GA
    Rate: $60
    Per Diem: YES
    Overtime: YES
    Duration: ASAP
    Start Date: 1 YR +
    Input Date: 10/08/2018
    Last Updated: 11/14/2018
    Firm Name: PRECISION PERSONNEL INC
    Attention: Matt Gregory
    Address: 600 CLEVELAND ST STE 700
    City, State: CLEARWATER, FL 33755
    Phone: 727/449-0600
    800 Phone: 877/600-2333
    Fax Phone: 727/449-0627
    Email: Matt@precisionpersonnel.com
    Website: www.precisionpersonnel.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Tool Designer - Level 2

    Description:
    Location: Bothell, WA
    Rate: $35.00 - $45.00/HR
    Duration: 9 month contract
    Shift: 1st Shift
    Overtime: Possible

    ****MUST be a U.S. Citizen****

    Description
    - Designs, develops and implements industrial machinery and equipment, tools, dies, gauges, jigs, fixtures, prototype model production and machine attachments required for production or experimental use, considering such factors as accessibility, economy, mobility, and performance requirements.
    - Utilizes CAD/CAM to design tools. Involved with start-up activities associated with new product introduction including developing tooling concepts, detailed tool design, ordering, tracking, final prove in of tooling, and process development and implementation.
    - Provide support to manufacturing engineering in development and implementation Manufacturing Process Plans (MPP's) for a variety of electronic, mechanical, and electro-mechanical/optical assemblies.
    - Will utilize software programs to develop MPP's, design tooling, support equipment, and process flows.
    - Provide technical guidance and support to manufacturing assembly team.
    - Apply lean manufacturing techniques to reduce cost and increase yields.
    - Investigate root cause of failures/defects and implement corrective action to support continuous improvement.


    Skill/Experience/Education
    Mandatory:
    - CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
    - EPDM experience
    - Attention to detail, good interpersonal skills, ability to multitask, good organizational skills, computer literacy, and a demonstrated ability to work well in a team environment.
    - Knowledge of electro-mechanical assembly, industrial processes, technical writing, and teaming.
    - Candidate should have a good understanding and demonstrated application of technical and problem solving skills in the area of manufacturing and production.
    - Candidate should have hands on experience with building/assembling hardware, and the ability to clearly communicate instructions, verbally and written, providing clear direction for subsequent builds

    Desired:
    - CREO/ProE experience with a focus on tooling, taking a concept through to final design and fabrication.
    - Experience with manufacturing processes (electronic, mechanical, optical assemblies), GD&T, precision machining, assembly sequences.
    - SAP experience
    - Able to identify and implement process plan changes to preliminary and existing work instructions (MPPs).
     
    Job Number: 9373
    Job Location: Bothell, WA
    Rate: $35.00 - $45.00/HR
    Per Diem: Split Possible
    Overtime: Possible
    Duration: 9 mos
    Start Date: ASAP
    Input Date: 06/13/2018
    Firm Name: INCONEN CORPORATION
    Attention: Patrick O'Neil
    Address: 6133 BRISTOL PKWY STE 232
    City, State: CULVER CITY, CA 90230
    Phone: 310/410-1931
    Fax Phone: 310/410-1751
    Website: www.inconen.com

    THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
    Turbomachinery Mechanical Design Engineer

    Description:
    Major Responsibilities:
    Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
    This position requires the development of design concepts, 3D models, and support the development and checking of detailed drawings for the manufacture of parts.
    Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
    Develop the GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level reqmts to component level reqmts.
    Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
    Applicant must have prior turbomachinery design or development experience.
    Skills:
    Must possess advanced knowledge of geometric dimensioning and tolerancing.
    Ability to read and interpret drawings, blueprints, and related specifications.
    Ability to write clearly and concisely.
    Understanding of appropriate codes, regulations, and specifications as well as applicable customer requirements.
    Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 is required with advanced modeling skills including surfacing) and Computer-Aided Manufacture (CAM) methods and techniques.
    Knowledge of Windchill PLM functionality for CAD data management and drawing release preferred.
    Knowledge of design practices, manufacturing techniques, and inspection requirements.
    Knowledge of castings and airfoil parts is a plus.
    May require the use of various computer systems to produce data, analysis, and reports.
    Education:
    Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.
    Product Definition (Drafting) specialists will be considered with requisite modeling and draw creation skills and appropriate education and experience.

    Per Client: US Citizenship is Required
     
    Job Number: 29678
    Job Location: Canoga Park, CA
    Per Diem: No
    Overtime: Possible
    Duration: 6mo+
    Start Date: ASAP
    Input Date: 06/07/2018
    Firm Name: TAD PGS INC
    Attention: Kim Silcott
    Address: 12062 VALLEY VIEW ST STE 108
    City, State: GARDEN GROVE, CA 92845
    Phone: 714/622-3967
    800 Phone: 800/261-3779
    Fax Phone: 714/897-8455
    Website: www.tadpgs.com

    Back to Advanced Job Search