Job Search Results

389 listings were found that matched your search words: Keywords: Mechanical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2025/07/11 Friday 09:14PM Pacific Time by ContractJobHunter. )

Listings 1 - 389
Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
A&P Mechanic - Maintenance

Description:
Job Summary:
This position will support the Bell Piney Flats maintenance department by performing scheduled and unscheduled aircraft maintenance on turbine powered rotorcraft.

Responsibilities will include:
• Perform maintenance such as preservation/de-preservation and removal and repair of airframe components.
• Perform inspections (25hr/30day, 6mo inspections, 12 month, 24 month etc.).
• Under supervision, assist/perform major inspections, and repairs
Assist with prep for fly offs.
• Understand safe and applicable use for basic hand tools.
• Learn and apply knowledge of tasks.
• Read and interpret installation instructions and manufacturer maintenance manuals.
• Demonstrate safe work habits and always wear proper PPE.

Qualifications
Position Requirements:
• A&P license.
• Requires 5+ years of related experience, to include prior maintenance on rotorcraft mechanical systems. Prefer 8 years w/A&P


Preferred:
• Maintenance on Bell commercial helicopters
• Bell field maintenance courses

Educational requirements:
High school diploma or GED

Physical Requirements:
• Must be able to walk and lift up to 25 lbs.
• Perform prolonged kneeling, squatting, sitting, crawling, and climbing stairs, ladders and work stands
 
Job Number: PFAPM
Job Location: Piney Flats, TN
Rate: 30-35
Per Diem: split
Overtime: possible
Duration: 6+mos
Input Date: 06/10/2025
Firm Name: 804 TECHNOLOGY
Attention: Dwayne Crecelius
Address: 5381 HIGHWAY N STE 201
City, State: COTTLEVILLE, MO 63304
Phone: 636/928-0330
Fax Phone: 636/530-3693
Website: www.804technology.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineering Technician (Rotorcraft), Fort Worth, TX - JR-019786

Description:
Aerospace Engineering Technician (Rotorcraft), Fort Worth, TX
JR-019786

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

You Will:

• Report to onsite Engineering Manager
• Act as Engineering technician / mechanical engineering mechanic with experience in test machinery, drive systems and gear boxes.
• Accountable for construction, assembly, installation, checkout and operation of various test machines and fixtures per Engineering Laboratory Operating Procedures and Engineering Instructions.
•
• Additional functions include the performance of acceptance tests, assembly and disassembly of Drive System components, preparing laboratory test procedures and maintenance of equipment.
• Responsible for building and testing of aircraft components, fixtures and tooling required to conduct tests.
•
• Interact with test engineers, laboratory technicians and test support groups.
• Requires record keeping, documentation and helicopter component assembly/installation.
• Interact with personnel in other laboratories.
• Interact with Manufacturing, Transportation, Maintenance, Quality, Dispatching, Tooling and various other departments.
•
You Will Need:

• Read and understand mechanical drawings, reports, specifications and engineering instructions in order to make, assemble, build, operate and repair test machines, (aircraft gear boxes, drive systems etc Preferred)
•
• Able to lift 50 pounds.
• This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR).
•
Education: Associate Degree in Engineering (Mechanical) (Preferred)
High School Diploma with Five years’ experience
Years of Experience: 5 yrs Required.

Industry: Aerospace (Aircraft A&P license) Equivalent military certification / Mechanical , USAF,

Citizenship: US Citizen
Skills & Experience
Aircraft Maintenance, Drive Systems, Mechanical Maintenance, Mechanical Repairs, Mechanical Testing
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.

https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Engineering-Technician_JR-019000
 
Job Number: JR-019786
Job Location: Fort Worth, TX
Input Date: 06/10/2025
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Description:
Fatigue and Damage Tolerance Engineer, Fort Worth, TX

Cyient takes pride in partnering with the world's leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver many end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

You Will:
Responsibilities:
• Conduct complex fatigue and damage tolerance analysis for metallic components of helicopter rotor, airframe and drive system structures and prepare certification reports
• Conduct and document crack growth analysis validation using test results for inclusion in certification reports
• Conduct reviews of analyses prepared by the engineering team to meet the FAA approved Helicopter methodologies for the ODA EFUM to review and approve
• Guide engineers as they learn to conduct the fatigue and damage tolerance analyses for Helicopter certification
• Conduct and document material coupon testing for fatigue and crack growth properties of various metals
• Contribute to the completion of milestones associated with specific projects (completion of analysis and reporting of results and FAA approvals)
• Use engineering methods and tools such as NASGRO, AFGROW, ANSYS, NASTRAN / PATRAN and a balance of classical hand calculations to analyze high performance rotor, drives and airframe structures.

You'll Need:
Skills:
• High level of proficiency in Fatigue and Damage Tolerance
• Experience in Helicopter analysis
• Experience with NASGRO and/or AFGROW
• Have experience in using MS Office Suite (Outlook, Word, Excel, PowerPoint).
• Good oral and written communication skills

Education: BS in Mechanical, Aerospace Engineering, Math or related science degree or MS in Mechanical, Aerospace Engineering, Math or related science degree required. PhD also is considered.

Experience: Aerospace Rotorcraft – fatigue and damage tolerance analysis - 10+ yrs REQUIRED

Citizenship: US Citizen

Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-018472
Job Location: Fort Worth, TX
Input Date: 06/10/2025
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Instrumentation Lab Technician, Fort Worth, TX

Description:
Aerospace Instrumentation Lab Technician, Fort Worth, TX
JR-018955

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.
We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.

Job Description

Instrumentation Lab Technician (Aerospace Rotorcraft)

You Will :

• Report to the onsite Engineering Manager
• The Instrumentation Laboratory Technician is responsible for setting up, operation and maintenance of specialized instrumentation data acquisition systems.
• This includes the use of simple electronics equipment including ohmmeter and voltmeter. This includes wiring and soldering connections.
• He/she must possess technical skills for troubleshooting, maintenance and limited repair of low power DC circuits.
• Work on both metallic and Composite parts/ assemblies to fix strain gages and wiring for data collection
• There may be travel requirements for off-site testing which can last up to 8 weeks at a time. Also, candidate should
• Can work second shift if necessary.
•
You Will Need:
• Ability to solder and build cables, with knowledge of various connector types.
• Very good knowledge of strain gages, fixing them on surfaces such as Composite structures, metallic structures and pipes etc.
• Self-starter with demonstrated ability to work successfully in a team environment with customers and other disciplines
• Proficient to read and understand wiring diagrams for small project assembly
• Able to read and understand mechanical drawings
• Microsoft software suite applications such as Excel, Word, PowerPoint
• Good communication skills – oral and written.
• Physical strength -ability to lift up to 75 lbs , climb and work for extend periods in confined areas
•
Education: Associate Degree in Electrical / Electronics / Science / Mech. engineering (preferred), High School Diploma (required)

Years of Experience: Industry: Instrumentation / strain gage Installation / aerospace :5+ yrs
Required

Citizenship: US citizen

Skills & Experience
Soldering, Strain Gauging, Wire Harness Fabrication
Cyient is an Equal Opportunity Employer.

Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.


https://cyient.wd3.myworkdayjobs.com/en-US/careers/job/Fort-Worth-Texas/Instrumentation-Lab-Technician_JR-018955
 
Job Number: JR-018955
Job Location: Fort Worth, TX
Input Date: 06/10/2025
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Senior Composites Materials Test Engineer, Fort Worth, TX

Description:
Sr. Non-Metallic Materials Test-Engineer, Fort Worth, TX

JR-019392

Cyient takes pride in partnering with the world’s leading Aerospace & Defense companies to deliver value-driven and outcome-based engineering solutions. We undertake design and system-level ownership of complex components, sub-systems, and modules to allow our clients to sustain a competitive advantage.

We collaborate with clients to support and deliver a wide range of end-to-end product and process engineering solutions across the Aerospace & Defense product segments - engines, avionics, structures, systems, interiors, aftermarket, digital, and defense.



You Will:


You will report to the onsite Engineering Manager. You will perform different Test Engineering tasks to support development, production, and use of advanced engineered composite materials on advanced aerospace vehicles for military, commercial, and innovation application.


You Will:


• Demonstrate advanced knowledge of materials, processes and the controlling specifications.
• Have experience in Composite Materials and processes.
• Have experience in bonding techniques, both metallic and composites.
• Demonstrate advanced skills related to drawing review and interpretation using CAD/CAM software
• Demonstrate advanced skills in using computerized drawing management system (ENOVIA)
• Write wide range of technical reports (IOMs, Test Requests, Destructive Test, Bonding Lab and Material Characterization Reports)
• Demonstrate expertise in Composites testing using Testing machine frames such as MTS or Instron.
• Demonstrate experience in Testing & evaluation of properties of composites by testing specimens in Compression, Tension, 3 - point bend testing, Three- and four-point flexure testing, Tensile testing of isotropic and orthotropic non-unidirectional fiber composites, Design Features laminate testing, Tensile testing of unidirectional carbon fiber reinforced composites, Testing laminates for in-plane shear response of polymer matrix composite materials, lap shear strengths of adhesive bonded single-lap-joints and double -lap joints, Testing of honeycomb sandwich constructed panels,
• Design test specimens for features testing, with discussions of design engineers, such as riveted joint specimens, Holed / notched specimens,
• Program machines (hydraulic or electrical Test frames) for software modifications of Test templates / creating new templates / new test processes. Keeping the OEM software updates and ensuring the upload’s performance. Statistical methods and materials
• Calibration of test machines / and troubleshooting /
• Well versed with test methods such as :
• ASTM D2344; ASTM D3039; ASTM D3410; ASTM D3518; ASTM D6641
• EN 2377; EN 2561; EN 2597; EN 6031
• ISO 14126; ISO 14129; ISO 14130; ISO 527-4; ISO 527-5
• Review and revise material and process coordinating with vendors to resolve issues.
• Provide recommendations to `wider range of shop production problems, coordinating directly with manufacturing and quality personnel.
• Gain familiarity with mechanical test equipment and learn to conduct simple static tests.
• Work with lab technicians to manage more complex test programs.
• Develop proficiency with vendor audits to conducts audits unsupervised, coordinating with Supplier Product and Quality personnel.
• Familiar with DMA test process.




You'll Need:


• Knowledge of Composites Materials and industry test standards for aerospace materials – SAE, ASTM , MIL Standards etc.
• Experience of Test machines – MTS required
• CATIA V5 or CATIA V6, ENOVIA
• MS Office, Word, Excel, Powerpoint, Outlook


Education: BS Mechanical Engineering or Aerospace Engineering - Required. (MS Mechanical Engineering or Aerospace Engineering preferred)


Experience : 10 years’ experience in an aerospace environment ( with non-metallic material lab environment preferred)


Citizenship: US citizen


Cyient recruits, employs, trains, compensates, and promotes regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender, gender identity or expression, veteran status, and other protected status as required by applicable law. We are proud to be a diverse and inclusive company where our people can focus their whole self on solving problems that matter.
 
Job Number: JR-019392
Job Location: Fort Worth, TX
Input Date: 06/10/2025
Firm Name: CYIENT
Attention: Elizabeth Stoddard
Address: 1401 NOLAN RYAN EXPY
City, State: ARLINGTON, TX 76011
Website: www.cyient.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft A&P Mechanics

Description:
STS Technical Services is hiring Aircraft A&P Mechanics in Tucson, Arizona.

Position Overview: 

The Aircraft A&P Mechanic troubleshoots, repairs, inspect sand performs maintenance on Customer aircraft. He / she also performs and documents all work done per appropriate manuals and regulations as required.

Job Duties:
Adhere to our client's general work requirements
Comply with Environmental / Health / Safety policies and procedures.
Participate in 5-S activities
Perform all work in a safe and timely manner
Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft
Perform and document work performed per appropriate manuals and regulations as required
Operate ground support equipment as required
Perform mechanical / electrical removals and installations
May assist with maintenance at off-site locations
Assist in providing time estimates
Assist in performing complex repairs on aircraft systems
Perform other duties as assigned
Our Ideal Candidate:
You have an A & P Certificate
You have 0 – 2 years aircraft maintenance experience or substantiated equivalent experience
You have the ability to interpret and work with mechanical engineering drawings
You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status
You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
You must obtain appropriate Ground Support Equipment Qualifications as required
You have the ability to work unscheduled overtime including non scheduled work days and holidays
You have the ability to work in seasonal/inclement weather outside
You have the ability to obtain a Security Identification Display Area badge (SIDA) (If applicable)
You have basic PC skills
Preferred Qualifications:
You have experience on corporate jet aircraft / commercial aircraft
You have Bombardier aircraft model experience
You have demonstrated the ability to train other employees
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35320
Job Location: Tucson, AZ
Input Date: 06/10/2025
Firm Name: STS AEROSTAFF SERVICES
Attention: Savannah Cruz
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aircraft Sheet Metal Mechanics

Description:
STS Technical Services is hiring Aircraft Sheet Metal Mechanics in Tucson, Arizona.

Position Overview: 

Troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Perform and document all work performed per appropriate manuals and regulations as required.

Job Duties:
Adhere to our client's General Work Requirements (Factory, Shop and / or Hanger positions)
Comply with environmental health / safety policies / procedures, participate in 5-S activities and perform work in a safe and timely manner
Remove / install aircraft components as required
Fabricate and or modify structural modifications on aircraft part
Perform minor structural repairs on composite components either attached or detached
Assist in conducting hidden damage inspection of aircraft structures
Assist with complex structural repairs either on or off aircraft
Operate ground support equipment as required
Assist with aircraft component repair
Perform mechanical / electrical removals and installations as required
May assist with maintenance at off-site locations
Assist in wing removal as required
Assist maintenance as required
Inspect confined areas of airframe
Assist in designing, modifying and welding metal fixtures as required
Assist in providing time estimates as required
Fabricate sheet and/or composite components
As Our Ideal Candidate:
You have a minimum of 2-5 years of structural sheet metal repair / modification experience or substantiated similar experience
You have an A Certification, or A & P Certificate or Repairman Certificate
You have completed Sheet metal A/C Tech school or equivalent schoolingf
You have the ability to interpret and work with mechanical engineering drawing
You have the ability to  effectively communicate in both written and verbal form on individual and / or aircraft status
You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools
You must obtain appropriate Ground Support Equipment Qualifications as required
You have the ability to work unscheduled overtime including nonscheduled work days and holidays
You have the ability to work in seasonal/inclement weather outside
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35321
Job Location: Tucson, AZ
Input Date: 06/10/2025
Firm Name: STS AEROSTAFF SERVICES
Attention: Johnny Cruz
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
CREO REMOTE Aircraft Structures Mechanical Engineers and Designers

Description:
Looking for CREO degreed and non-degreed Mechanical Engineers and Designers. Degree not required. Just looking for strong CREO and Structures experience. Aircraft Structures preferred. 10+ years experience. A mix of New Drawings and Modification of existing. Structures, Tooling, etc. Please email your resume then call Peggy at 774-210-4108
 
Job Number: PL CREO
Job Location: REMOTE, REMOTE
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: 6-12 months
Start Date: 2 weeks
Input Date: 06/10/2025
Firm Name: ADVANCED TECHNOLOGY
Attention: Peggy Sr. Recruiter
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Deceleration Engineer

Description:
Inconen is looking for a Deceleration Engineer for our client, a well-known Aerospace Company, in Orlando, FL.

Duties:
Our client in Orlando, FL is seeking an Aerospace or Mechanical Engineer to support the deceleration team. This team is responsible for design and analysis of the parachute systems used for air-extraction of our various launch vehicles. These air-extractions are similar in concept to standard military cargo extraction from aircraft like the C-130 or C-17A.

The successful candidate will be asked to perform parachute design activities through 6DOF simulation and loads analysis. This entails designing parachute structures, reefing ratios, riser and mainline lengths, etc. to ensure a successful extraction and descent while ensuring launch vehicle load capabilities are not exceeded. The candidate will be expected to read, understand, update, and maintain a 6 Degree-of-Freedom simulation used to simulate the extraction and descent of our clients launch vehicles. This position will require a background in vector mechanics, dynamics, and software configuration control processes. The candidate may also participate in estimating aerodynamic properties and loads through the use of computational fluid dynamics (CFD) software.

Essential Job Functions (Including % of Time for Each):
50% - Activities to include tooling design, tooling procurement and fabrication, and conduct tooling functional checkout. Responsible for tooling design based on efficiency, ease and safety or operation, ease of maintenance and cost of fabrication. Interfaces with suppliers and manufacturing personnel to assure that tool design requirements and intent are met. Coordinate tooling functional checkout with manufacturing disciplines prior to releasing tooling to manufacturing operations.
15% - Parachute Design and Loads Analysis.
40% - Parachute/Extraction System Modeling and Simulation updates.
35% - Computational Fluid Dynamics (CFD) of Parachutes and Target System.
10% - Oversee field installation and testing of Parachute design.

Skills:
REQUIRED:
1. Minimum of 2 years of professional experience working with parachute deceleration systems or an equivalent combination of experience and education.
2. B.S. in Aerospace, Mechanical, or equivalent degree.
3. Prior experience with 6DOF simulation of deceleration systems.
4. Prior experience with Computational Fluid Dynamics (CFD) software.
5. Ability to program and use MATLAB/Simulink.
6. Exceptional written and oral communication skills to include report writing, requirements derivation, and documentation, as well as design review presentations.

DESIRED:
1. Experience with programming in C, C++, and Fortran and using MATLAB/Simulink.
2. Experience working with deceleration systems.
3. Experience using CANO, CALA, TENSION, and/or LS-DYNA analysis tools.
4. Working knowledge of aircraft/missile dynamics and control.
5. Experience with air drops from military aircraft.
6. Active DoD Secret Clearance.
 
Job Number: 12119
Job Location: Orlando, FL
Rate: $38.00/HR
Per Diem: N/A
Overtime: Possible
Duration: Direct Hire
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Checker/Drafter

Description:
Inconen is looking for a Design Checker/Drafter for our client, a well-known Aerospace Company, in Orlando, FL.

**Candidates must be able to obtain a Secret Clearance**

Position Description:
Designs and oversees the plant or manufacturing systems fabrication installation modification maintenance and repair of mechanical equipment such as conveyor systems production machinery and other material-handling equipment used in fabrication assembly and other production functions; analyzes engineering sketches specifications and related data and drawings to determine design factors such as size shape and arrangements of parts; oversees the construction of machine and subassemblies considering such specifications as gear ratios bearing loads and direction of moving parts; compiles and analyzes test data to determine effect of design on machines in relation to factors such as temperature pressures speed horsepower and fuel consumption.

Skills Required:
1. PDF Creation & Editing, Configuration Management, Drafting using CREO 4.0.
2. Familiarity with drafting standards.

Experience Required:
1. 2 Years drafting experience .

Education Required:
1. Bachelor of Science in engineering or equivalent

Additional Information:
1. Remote work is OK.
 
Job Number: 12641
Job Location: Orlando, FL
Rate: $40.00 - $46.73/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 3 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Designer I

Description:
Description:

Job Summary: Create designs of aircraft interior products ranging from but not limited to: bins, galleys, lavatories, ceiling panels or seats used in commercial and private aircrafts using a computer aided drafting system and support existing designs of products which are manufactured on site. While creating new designs, considerations of certification, composites/general material selection due to weight restrictions in aircrafts and ease of manufacturing is necessary. Product designs range from basic interiors products used in regional aircraft, commercial airlines, first class and high end private jets products.

Duties: Produce innovative, intelligent designs (drawings) for on site production in a timely manner with respect to the project schedule, while optimizing ease of manufacturing, cost, weight and function; Develop quality designs and evaluate cost, weight, and ensure the design is producible within the time constraints of a project; Design to mandatory regulatory requirements, customer and company specifications; Produce accurate drawings, preliminary layouts, production details and assembly drawings while meeting drawing release dates; Produce ECNs (Engineering Change Notice) as required to support manufacturing, customers, quality and certification; Prepare drawings and other engineering data required for the manufacturing of the product designed; Act as a shop liaison during initial production of new product designs to prevent and/or solve any engineering issue that may arise; Identify problems and seek solutions.; Verify, check and sign off on co-workers engineering drawings; Examine suppliers lead times, costs and availability for parts and tooling necessary to manufacture the product being designed.

Experience: 1-3 years

● Develops competence by performing structured work assignments
● Uses existing procedures to solve routine or standard problems
● Receives instruction, guidance and direction from others

Education: BS in Aeronautical or Mechanical Engineering is preferred.

Computer Skills: MS Office Suite, MS Windows, AutoCAD, Catia V5

Other Skills: Understanding of aircraft trim and finish practices, basics of airworthiness requirements for passenger aircraft, and mechanical systems and strengths of materials.
 
Job Number: 133000
Job Location: Costa Mesa, CA
Rate: $40.00
Per Diem: Possible
Overtime: Yes
Duration: 18 Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: GLOBAL TECH SERVICES
Attention: Kerry Moreland
Address: P O BOX 161127
3455 NE LOOP 820
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
A Engineering Technician job in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. To be considered for this role, you will need 2+ years of experience with a Associates Degree in related field or study.

Engineering Technician Job duties:
* Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
* Constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure company systems and components meet established specifications.

Qualifications:
* Associate's degree in a related field of study and at least 2 years of relevant experience.
* A higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Previous experience and/or certifications within the aerospace and defense industry.
* Previous experience in a manufacturing environment.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* The ability to obtain and maintain a Security Clearance may be required Learn more about the background check process for Security Clearances.

If you are interested in this Engineering Technician job in Louisville, CO, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 305953
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: Dee AnnVan Schaick
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Engineering Technician

Description:
A Engineering Technician job in Louisville, CO is currently available through Belcan with one of our Aerospace clients. You will be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. To be considered for this role, you will need 2+ years of experience with a Associates Degree in related field or study.

Engineering Technician Job duties:
* Perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas.
* Constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems.
* Ensure company systems and components meet established specifications.

Qualifications:
* Associate's degree in a related field of study and at least 2 years of relevant experience.
* A higher level degree may substitute for experience.
* Related experience may be considered in lieu of required education.
* Previous experience and/or certifications within the aerospace and defense industry.
* Previous experience in a manufacturing environment.
* Ability to read and understand mechanical and electrical drawings, diagrams, schematics, and manuals.
* Ability to work with standard laboratory test equipment, other measurement equipment, hand tools, and power tools.
* The ability to obtain and maintain a Security Clearance may be required Learn more about the background check process for Security Clearances.

If you are interested in this Engineering Technician job in Louisville, CO, please apply via the 'apply now' link provided.? Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at?http://www.belcan.com.
 
Job Number: 305952
Job Location: Louisville, CO
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: ScottWatkins
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F5 Engineering Ground Test / Structural Laboratory Technicians (1st & 2nd shift)

Description:
The ideal candidate will be capable of working from engineering drawings with limited guidance to fabricate and assemble structural and dynamic aircraft component test facilities.

• Must be able to diagnose and repair hydraulic, mechanical and controls systems associated with test facilities required to support Engineering Ground Test Development programs.
• Must possess a strong mechanical and fabrication background with emphasis on erecting mechanical structures to facilitate aircraft component testing.
• Must possess a strong aptitude for industrial hydraulic component fabrication and assembly.
• Must be able to read and interpret engineering mechanical drawings and fluid power schematics.
• Must be able to work from elevated work platforms at various heights.
• Must be willing and able to work in inclement weather.
• Must be capable and comfortable working within a diverse team environment.
• Must possess skills and aptitude to operate test facilities and data acquisition systems.
 
Job Number: 2010121878
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 15 months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
F7 Ground Test and Aircraft Instrumentation Technician (Strain Gauge experience)

Description:
The ideal candidate will work from Engineering Requests, Procedures and Drawings with limited guidance to Fabricate, Install, Check-out, Diagnose, and Trouble-Shoot Instrumentation Data Acquisition Systems/Sensors in support of Ground and Flight Test Programs.

Requires planning, building and terminating the various cable harnesses required in the Instrumentation System.

The candidate will assist in performing System and sensor calibrations.

The working environment will consist of the Structural Test Lab, Remote Test Stands (Engineering & Quality Assurance ) as well as Offsite support to include Aircraft Instrumentation

Requires a good working knowledge of Instrumentation Sensors, slip rings, and data acquisition systems.

Must possess a strong Mechanical and Electrical background and familiarity with Strain Gauges and their circuitry, linear displacement and vibration transducers, measurement systems, instrumentation wiring and documentation.

Ability to perform strain gauge installations preferred.

Must be able to work from elevated work platforms at various heights.

Must be willing and able to work in inclement weather.

Must be capable and comfortable working within a diverse team environment.
 
Job Number: 2010122702
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

Unique Skills
• Experience developing test plans to support onboard fixed wing experimental flight test aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
• Experience performing onboard testing of fixed wing aircraft.
• Experience analyzing data from an airplane level test to determine pass/fail.

Education and Experience Requirements
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.
 
Job Number: 24-450
Job Location: Savannah, GA
Rate: $60-$70/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PRECISION PERSONNEL INC
Attention: Brandon
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Inconen is looking for a Flight Test Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

The following are preferred:
1. Experience developing test plans to support onboard fixed wing experimental flight test aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
2. Experience performing onboard testing of fixed wing aircraft.
3. Experience analyzing data from an airplane level test to determine pass/fail.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product. 2. Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12598
Job Location: Savannah, GA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:

The following are preferred:

Experience developing test plans to support onboard fixed wing experimental flight test aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems.
Experience performing onboard testing of fixed wing aircraft.
Experience analyzing data from an airplane level test to determine pass/fail.


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of the Company's products and services.

Principle Duties and Responsibilities:

Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
2. Is consulted extensively by associates and others as a recognized authority within the field
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
4. Approach to problem solving balances technical product, cost and schedule
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
.
 
Job Number: 132899
Job Location: Savannah, GA
Rate: $65 - $70
Per Diem: Possible
Overtime: Yes
Duration: Open
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: GLOBAL TECH SERVICES
Attention: Kerry Moreland
Address: P O BOX 161127
3455 NE LOOP 820
City, State: FORT WORTH, TX 76161-1127
Phone: 817/847-6673
800 Phone: 800/942-2376
Fax Phone: 817/847-9444
Website: www.teamglobal.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Ground Test Engineer

Description:
Responsible for specific discrete tasks covering all aspects of Ground Testing helicopter components and systems. Requires application of all Mechanical/Aerospace Engineering disciplines to a wide variety of technical problems. Typical tasks include detailed test planning, coordination with internal and external customers, test conduct, use of computer data analysis tools, and generation of test plans and reports. Ground Test Engineers are responsible for final conclusions and recommendations on the performance, safety, qualification, and adequacy of tested components and systems. This process may involve test and evaluation of components, assemblies and systems including main and tail rotor dynamic components, rotor drive systems, flight control systems, fuel systems, hydraulic systems, pneumatic systems, mission equipment, and airframe structure. Test programs typically involve full scale fatigue and static evaluations of dynamic components, main and tail rotor whirl tests, airframe static tests, airframe shake tests, dynamic stability, component testing, and the evaluation of aircraft system level performance prior to flight. Tasks also include the development and implementation of test procedures used to validate the performance of installed aircraft systems and components during final assembly, supporting and establishing operating limitations for both flight test programs and fielded aircraft, and oversight of supplier performed component qualification efforts.
 
Job Number: 20-2541
Job Location: CT
Overtime: Pssible
Duration: 15 -18 months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: AGENTE TECHNICAL
Attention: Alexa Bui
Address: 714 CENTERPARK DR STE 140
City, State: COLLEYVILLE, TX 76034-2852
Phone: 972/415-4545
800 Phone: 866/758-2494
Fax Phone: 866/717-5927
Website: www.agentetech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Machine Operators

Description:
STS Technical Services is hiring Machine Operators in West Bend, Wisconsin with a strong mechanical aptitude to fill a variety of 1st and 2nd shift openings.

Earn $16.00 per hour while enhancing your machining craft.

Responsibilities:
Under the supervision of the Lead Machinist, the operator sets up, adjusts and operates CNC machining equipment for mass production of metal machined parts in accordance with manufacturing and quality standards.
Operates machinery to perform job specifications utilizing drawings, bills of material and manufacturing work orders.
Skillfully uses machine tools, hand tools, and measuring instruments.
Perform periodic checks on equipment and solve problems as detected.
Work with others in order to ensure that equipment is in proper working order.
Process all necessary documentation and paperwork for completed processes.
Follow all clean up and housekeeping procedures.
Comply with all quality and safety regulations
Requirements:
High School Diploma or equivalent
2+ years’ experience in a manufacturing environment
Knowledge in use of hand tools and measuring equipment
Positive attitude
Strong work ethic
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35777
Job Location: West Bend, WI
Input Date: 06/10/2025
Firm Name: STS AEROSTAFF SERVICES
Attention: Tammer Fadel
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Assembler I- Job ID 43277

Description:
We have an Excellent Contract position for an Assembler to join a leading Company located in the Sylmar, CA area.

Job Responsibilities:
Performs electronic and mechanical assembly and rework including conformal coat touch-up.
Assembles production units, disassembles, and reassembles customer returned units.
Works from written and verbal instructions, engineering drawings, blueprints, wire-lists, or detailed specifications.
Performs sandblasting, staking, bonding, masking, demasking, conformal coat mixing, and touch-up.
Performs basic knot tying, cord pulling, end terminations, hand sewing/foaming and booting, and oil filling towed array modules.
Operates the eight-spool sewing machine.
Verifies the workmanship of work performed on previous operations to J-Standard-001 or PIC-ANSI-610.
Stamping
Spot tying.
Encapsulates and impregnates electronic and mechanical devices, including first article samples.
Mold preparation/maintenance and the use of air evacuation devices.
Mixes chemicals and other commercial materials to specific requirements.
Builds electromechanical sub-assemblies.
Verifies the electromechanical test data list.

Basic Hiring Criteria:
High School Diploma or equivalent.
Must hold Assembler S-1 Solder Certification, additionally must be able to perform at Assembler S-1 level.

Desired Qualifications:
Familiar with electronic and mechanical assembly.
Ability to handle multiple projects and priorities.
Able to understand written and verbal communication.
2+ years of assembly experience preferred.
AA/BS degree in Electronics preferred.
 
Job Number: 43277
Job Location: Sylmar, CA
Rate: 19.03
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer

Description:
Inconen is looking for a Mechanical Design Engineer for our client, a well-known Aerospace Company, in Lexington, KY.

**Candidates must have an Active Secret Clearance or to have had one within the last 2 years. An Interim Secret Clearance will be accepted.**
**Candidate will work remote < 50%** Job Description: 1. This is a Mechanical Design Engineer, you will work as part of an engineering team based in Lexington, KY. 2. The team is focused primarily on modifying existing hardware and integrating modified components into various C-130 platforms based on customer specifications. 3. The primary function of this role is to design original components and assemblies as well as modify existing components, create and revise engineering drawings and documentation, and perform Design Engineering duties related to Engineering Change Notices (ECNs). 4. You will need to communicate effectively and regularly with fellow design engineers, manufacturing, documentation control, and installation crews. 5. This role includes design and drafting work as well, and as such your designs will comply with applicable military specifications, SAE, ANSI, ASME, and other related design and drafting standards. 6. CATIA V5R26 and Teamcenter experience is preferred. Education: 1. Level 2: BS+3-5 YRS or MS+0-3 YRS
 
Job Number: 12610
Job Location: Lexington, KY
Rate: DOE
Per Diem: Split Possible
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Inconen is looking for a Mechanical Engineer for our client, a well-known Aerospace Company, in Brea, CA.

**Candidates must be a U.S. Citizen**

Job Description:
1. Mechanical Engineer will manage deliveries of mid to high level complexity research, design, and development of mechanical applications to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and ground test / mechanical tests.
2. Additionally responsible for the CAD support of design projects and execution of Engineering design changes.

Primary Responsibilities:
1. Duties include the interpretation/analysis of customer test requirements, subsequent cost estimates to support test programs.
2. Design, implement, and maintain test processes for Hoist and Winch hardware using lean philosophies and techniques.
3. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
4. This can involve testing, data analysis, and interface with all aspects of the engineering department.
5. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
6. Responsibilities also include daily interface with VSL's, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of hoist and winch hardware.
2. Develop and validate tooling, test equipment designs (test harnesses, test boxes and acceptance test stands).
3. Author and maintain operation/test procedures (QTP, ATP) and reports.
4. Preparation of standardized operation/test Device Under Test.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve testability concerns.
8. Support customer communication and travel to external sites to conduct testing as needed.

Experience/Qualifications:
1. Candidates for this role should possess a Bachelor’s degree in Mechanical Engineering.
2. Experience with advanced instrumentation and data acquisition systems is required.
3. Knowledge of NI test hardware and Lab VIEW is preferred.
4. Experience should also include 3+ years working on the testing of electromechanical/mechatronic systems and components such as motor controllers, actuator controls, & system controllers.
5. Experience with executing D0-160 & MIL-STD-810 qualification programs.
6. Capability of working independently and is self-motivated.
7. Excellent communication skills, written and verbal are required.
8. Ability to proficiently operate common Microsoft Office software products is required.
9. Experience with reading, creating and improving technical documentation (drawings, CAD models, test procedures).
10. CAD tools (Solid works/ NX) experience preferred.
 
Job Number: 12605
Job Location: Brea, CA
Rate: DOE
Per Diem: No
Overtime: Possible
Duration: 6 Mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Inconen is looking for a Mechanical Engineer for our client, a well-known Aerospace Company, in Phoenix, AZ.

Job Description:
1. Mechanical Engineer with emphasis on aerospace electronics packaging.
2. Activities will include mechanical conceptual layout, detailed design, and engineering documentation.
3. Will interface with other engineering groups to ensure design requirements are fulfilled.
4. May be responsible for the CAD support of design projects and execution of Engineering design changes.

Primary Responsibilities:
1. Create conceptual and detailed designs using MCAD tools.
2. Generate innovative electronic packaging concepts and solutions.
3. Generate detailed solid models and engineering drawings.
4. Perform engineering analyses (Thermal, Stress and Vibration).
5. Occasional customer interface.
6. Create and make technical presentations.
7. Create test planning documentations and perform execution.
8. Product development from concept through production.
9. Processing documents through document change system.
10. Work in an Integrated Product Team environment.
11. Tracking budget and schedule metrics.

Basic Qualifications:
1. Bachelor’s degree in Mechanical or Aerospace Engineering.
2. 5+ years of Mechanical Engineering experience.
3. 1+ years of DO-160 or Mil-Std-810 experience.
4. 3+ years of Solid Modeling experience.
5. 3+ years of tolerance analysis and application of GD&T ASME Y14.5.
6. Strong knowledge of manufacturing processes.
7. Demonstrated full aerospace product life cycle experience.
8. Good organization and planning skills required.
9. Discipline to manage multiple tasks.
10. Close attention to detail required.

Preferred Experience:
1. Aerospace packaging design experience.
2. Knowledge and experience with Siemens NX preferred, but must adapt easily to other modeling tools.
3. Knowledge and experience with Siemens Teamcenter PLM preferred.
4. Analytical tool knowledge a plus (Icepak and/or Ansys Mechanical).
 
Job Number: 12488
Job Location: Phoenix, AZ
Rate: $48.25/HR
Per Diem: No
Overtime: Possible
Duration: 24 mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Engineer

Description:
Familiar with ASME/ANSI/SAE Standards
Strong computer skills in basic office and technical programs
US citizen
Requires a Bachelor's degree in Mechanical Engineering + 2 years of applicable experience
Preferred
Master's degree in Mechanical Engineering
Experience working with military electronics hardware
Working familiarity with DOD Standards (MIL-STD-810, etc.)
Experience with Pro-E/CREO, ANSYS engineering tools
 
Job Number: 49116
Job Location: TX
Rate: Open
Per Diem: Split
Overtime: Possible
Duration: 12 mos +
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PANTHER GROUP
Attention: Marques
Address: 5 MILL AND MAIN PL STE 430
City, State: MAYNARD, MA 01754
Phone: 781/790-7900
800 Phone: 800/776-0562
Fax Phone: 781/672-2570
Website: www.thepanthergrp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Design Engineer

Description:
• Must have experience designing aircraft mechanical systems like ECS, hydraulics, flight controls, etc.
• Must have experience writing test plans for mechanical systems
• Must have experience writing documents and reports for mechanical systems
• Must be a US Citizen
• Degree is preferred



The Structures Company is an AA/EOE.
 
Job Number: 437
Job Location: KS or CO
Rate: $Up to $62/Hr. **DOE**
Per Diem: Yes
Overtime: No
Duration: 10-12 Months
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer - 2nd Shift

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services

Unique Skills:
• A fundamental understanding of aircraft design and construction principles.
• The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
• Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
• Strong technical skills with mechanical systems.

Preferred Skills:
• Aerospace company engineering experience.
• Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
• Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
• Practical hands on aircraft repair experience and problem solving.
• Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required. 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Principle Duties and Responsibilities:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative
• Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements:
• Advanced degree in engineering, or related curriculum preferred.
• The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 24-445
Job Location: Savannah, GA
Rate: $65-68/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer, Service Engineering (2nd Shift)

Description:
Inconen is looking for a Mechanical Systems Engineer for our client, a well-known Aerospace Company, in Savannah, GA.

The following unique skills are required:
1) A fundamental understanding of aircraft design and construction principles.
2) The ability to effectively work with and support a multi-discipline team of engineers, mechanics, technicians, Quality Control, upper management, etc.
3) Experience using computer aided design tools such as CCD, CATIA V4 & V5, AutoCAD, or similar in design of aircraft structures.
4) Strong technical skills with mechanical systems.

The following are preferred skills:
1) Gulfstream engineering experience, e.g. G650, G500, G600.
2) Experience with Structural Repair Manuals, Illustrated Parts Catalog, Aircraft Maintenance Manuals.
3) Aircraft landing gear experience.
4) Flexibility to move quickly from one assignment to the next and the ability to handle multiple issues simultaneously.
5) Practical hands on aircraft repair experience and problem solving.
6) Familiarity with Airworthiness Authority regulations and showing compliance to such regulations with repairs and rework instructions in a post-production repair station environment.

Education and Experience Requirements:
1. Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required.
2. 10 years in specific technical discipline or 15 years broad engineering experience in several technical disciplines with Bachelors.
3. Experience credit considered for related adv degrees limited to 2 years for Masters and 4 years for PhD in fields applicable to this job.

Position Purpose:
1. Guides successful completion of major engineering programs or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues.
2. Is consulted extensively by associates and others as a recognized authority within the field.
3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities.
4. Approach to problem solving balances technical product, cost and schedule.
5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results.
6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative.

Additional Functions:
1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product.
2. Perform other duties as assigned.

Other Requirements:
1. Advanced degree in engineering, or related curriculum preferred.
2. The level of technical skill and abilities appropriate for this grade will be established by each discipline.
 
Job Number: 12589
Job Location: Savannah, GA
Rate: $65.00 - $68.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
NC Engineers - Catia V5 & Mastercam

Description:
Bachelor's Degree in Mechanical Engineering or a related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Eighteen (18) months of machining, planning, tool design, or related manufacturing experience.
Unique Skills
Catia V5 & Mastercam modeling experience preferred

Email resume to: mmccarthy@pdstech.com
 
Job Number: NC-Gulf
Job Location: Savannah, GA
Rate: $52.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Inspector

Description:
DUTIES AND RESPONSIBILITIES:
• Researches, identifies and prints the latest drawing (blueprint) of the required product and the customer’s Quality Plan for use in the inspection process
• Pulls the key characterizes of the drawing for each product ordered and Approved Supplier listing to create a Master Inspection Report in the database system to record the inspection
• Inspects a product sample visually and dimensionally and measures the Critical and Major dimensions, utilizing the proper hand tools and gages to verify conformity to the customer purchase order
• Reviews and confirms product documentation is complete and accurate (i.e., Certificate of Conformance, Raw Material Certification, Process Certifications and Test Reports) and that the products are from a customer Approved Supplier, verifying the traceability of the manufactured materials and testing
• Prepares First Article Inspection Reports in accordance with AS9102 and customer requirements, as applicable
• Records inspection results and compliance by assigning a “Pass, Fail or Rejection” status in the inspection log system, with additional notes, as applicable
• Transfers compliant products with a “Pass” status, accompanied by the corresponding inspection reports and compliance documentation to the Document Inspection rack, or informs Q.A. Supervisor of non-conforming issues and rejections for verification
• Upon confirmation of non-conforming products, creates an Orange Tag label or Rejection Tag label and transfers the entire order with appropriate label to the corresponding rack for investigation and corrections
• Enters inspection labor time accurately into the inspection log system, relative to each product on the customer purchase order

REQUIREMENTS:
• High School Diploma or GED
• Mechanically certified (ASQ or college preferred)
• 4 to 6 years related industry experience and/or training
• Successful completion of 3 months of Incora inspection training and testing
• Competent and demonstrated hands-on experience with the use of hardware measuring devices, such as calipers, micrometers, wing gauges, thread plug gauges and ring gauges, optical competitor and Johnson gauge, or other direct-reading engagement tool is preferred
• Ability to perform core job functions of Level I and II inspection roles
• Level III Inspectors must qualify to be certified as a Delegating Source Quality Representative (DSQR) to qualify hardware for commercial and government contract customers
• Strong verbal and written communication skills, with professional daily interaction with internal and/or external customers (as trained)
• Ability to be detailed oriented and perform basic research, if require
• Ability to be trained in the essential duties of the job, with accuracy
• Ability to learn and gain knowledge of the integrated database systems, as well as Microsoft Office Suite
• Final candidate must successfully complete a pre-employment drug screen, and both criminal and employment background clearance
 
Job Number: 2010120413
Job Location: Tempe, AZ
Overtime: possible
Duration: Temp-to-Hire
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Program Integrator Manufacturing Engineer

Description:
Inconen is looking for a Program Integrator Manufacturing Engineering for our client, a well-known Aerospace Company, in Huntsville, AL.

**Candidates must be U.S. Citizens without Dual Citizenship**

Duties:
1. Develop the internal execution plans and interface with key team members to ensure alignment of site and program objectives.
2. The key responsibilities is creating the plans to integrate several teams such as manufacturing engineering, tool engineering/design, manufacturing operations so that products can be developed and delivered per schedule and budget targets.

Essential Job Functions (Including % of Time for Each)
50% - Establish and oversee program plans for the operations site team to successfully execute the program requirements relative to schedule, cost, and performance/quality. This will include hardware manufacturing, tool design and fabrication, staffing, process development, and facility needs.
30% - Interface with program teams members and customers to ensure the program needs and site plans are in alignment. Develop recovery plans when issue arise and coordinate applicable corrective actions.
20% - Work special projects as assigned and recommend improvements to key processes that would improve the overall flow of the site's products.

Skills:
REQUIRED:
1. Experience working and developing program plan and execution on the Orion JM Program.

DESIRED:
1. Direct Orion JM program experience.
2. Experience with composite manufacturing and with the aerospace industry is also highly desired.
3. Must have strong written and verbal communication skills and the ability to analyze, evaluate and develop solutions to technical problems with minimum supervision.
4. Experience and familiarity with MS Office products required.

Education:
1. Bachelor’s degree in Industrial Technology, Manufacturing Engineering, Mechanical Engineering or related major and at least 9 years of related experience (or an equivalent combination of education and experience).
 
Job Number: 12596
Job Location: Huntsville, AL
Rate: $45.00 - $50.00/HR
Per Diem: Split Possible
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Control Inspector III/CMM Operator - 1st & 2nd Shifts Available

Description:
PRIMARY RESPONSIBILITIES INCLUDE:

Receiving and Production Inspection

Inspect and file/record incoming part history records.
Perform accurate mechanical, physical and visual inspection of raw materials, components, and sub-assemblies per provided Inspection and Test Plans, drawings and other specification requirements.
Read and accurately interpret specifications and part drawings.
Initiate nonconformance reports (NCs) as required
Ensure calibration and maintenance of inspection equipment is up to date prior to conducting inspection operations.

EDUCATION, EXPERIENCE AND SKILLS REQUIRED:
High School Diploma or equivalent

Must-Haves:
2-5 years of relevant experience in machining or quality control
Minimum (5) years’ experience in mechanical inspection and inspection techniques utilizing a wide range of inspection equipment: CMM (preferably Zeiss), optical comparator, calipers, micrometers, height gages, etc.
3-5 year’s experience in aviation or spacecraft preferred
Proficient in GD&T per ASME Y14.5M; certification preferred.
Proficient with geometry and trigonometry: machine shop math
Proficient in Solidworks
Zeiss O-Inspect with Calypso preferred
Experience with a wide variety machined parts ranging in size, shape and complexity.
Self-starter requiring minimal supervision.
Strong attention to detail and problem solving skills
Effective teamwork, interpersonal, and communication skills.
Good written and verbal communication skills.
Experience with MS Excel and Word.


Preferred:
3-5 year’s experience in aviation or spacecraft preferred
Knowledge and ability to understand and interpret technical schematics and drawings
Knowledge and ability to interpret geometric dimensioning and tolerance
Experience with finished goods inspection
Experience with Costpoint and/or AEGIS-MES
Basic understanding of material flow in operations
Experience drafting work instructions and SOP's
Experience with Network+, Security+, CCNA and/or A+
Working knowledge of ISO 9000 and AS 9100 standards

The Structures Company is an AA/EOE.
 
Job Number: 434
Job Location: Denver / Boulder, CO
Rate: $30-$32/Hr. ***DOE***
Per Diem: Possible
Overtime: Possible
Duration: 6 Month - CtoH
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Rotable Repair Technician

Description:
Troubleshoots and repairs electro-mechanical equipment to component level in accordance with FAA regulations
• Modifies equipment according to service bulletin and/or manufacturer documentation
• Works independently with little or no supervision, unless in need of collaboration with another Rotables technician
• Carries out prescribed procedures according to an established schedule, and discovers further repair work required without direct instruction
• Receives training in the use of more specialized test instruments and learn advanced troubleshooting procedures
• Follows specific layout and schematic diagrams to repair and maintain simple or advanced devices or subunits of equipment and schematic diagrams
• Review work orders to ensure customer requested activities have been complied with, prior to release of the repair
• May work on alternative assignments with detailed written or oral instructions
• Completes quality and production paper work, prepares estimates, and maintains maintenance documentation in accordance with current quality assurance requirements
• Communicates with cross-functional departments as required to support repair process
• Participates in Technician cross-training programs and may be assigned to other teams for short or long term assignments
• Completes repairs in accordance with company ISO procedures and within company objectives
Minimum Qualifications
 
Job Location: Orlando, FL
Per Diem: split
Overtime: Yes
Input Date: 06/10/2025
Firm Name: MORSON INTERNATIONAL
Attention: Jessica West
Address: 10800 GOSLING RD BOX 131565
City, State: SPRING, TX 77393
Phone: 713/636-2532
Fax Phone: 713/636-2523
Website: www.morsonusa.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineer

Description:
A Design Engineer job in Springfield, NJ is currently accepting applications. This is a direct-hire position with our key aerospace client. In this role, you will take customer requirements for an aerospace fluid control component and create a viable design solution that can be carried through all phases such as design, development, testing and manufacturing. To be considered for this role, you will have a B.S. Degree in Mechanical or Industrial Engineering along with a minimum of five years of experience designing fluid control components like Valves, Regulators and Pressure Vessels.

***Due to the nature of the work being conducted, U.S. Citizenship is a requirement***

Design Engineer Job Responsibilities:
* Complete new projects from creation of proposals through development, qualification, and production support
* Determine feasibility of designs considering costs, time limitations, and technical factors
* Apply engineering principles to design, develop, or modify new or existing products
* Conduct analytical studies on engineering proposals to develop design for products
* Analyze test data and reports to determine if design meets functional and performance specifications
* Prepare or directs preparations of component layouts and detailed drawings
* Plans and develops experimental test programs
* Prevent or eliminate defects in new or existing products

Design Engineer Job Requirements:
* B.S. in Mechanical or Industrial Engineering or the technical equivalent
* Minimum of five years of hands-on experience designing fluid control components like Valves, Regulators and Pressure Vessels for the aerospace industry
* Experience with AutoCAD and SolidWorks software is a must
* Project engineering and communication skills
* Ability to perform in a fast paced, 'hands-on' environment
* An Advanced Degree is preferred
* Hands-on experience with software like ANSYS, MathCAD, Solid Works, Pro-E or equivalent is desired
* Understanding or Six Sigma/Lean Manufacturing techniques and methods is desired

If you are interested in this Design Engineer job in Springfield, NJ, please apply via the 'apply now' link provided.

Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.
 
Job Number: 303447
Job Location: Springfield, NJ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: KimberlyCarlascio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft

Description:
Senior Mechanical Hydraulic Design and Analysis Engineer - Aircraft - China.


Our Aerospace Client based in China is looking for additional Engineering Support . They require a Senior Mechanical Hydraulic Design and Analysis Engineer.

This is an exciting opportunity to work in East Asia , contributing to the success of our Client's Aircraft Program. Good salary / remuneration for suitable skilled and qualified candidates.

Candidates should be prepared to live and work in Shanghai on a fixed term contract basis for 1-3 years.

Our Client's Mechanical Systems team is looking for innovative engineers to join the team in defining and integrating the Hydraulic Systems and components into our current and future

commercial airplane product lines. Their organisation has design, analysis, and certification responsibility for Hydraulic Power system, Hydraulic Conveyance system, Landing Gear and Brake Actuation

systems, Flight Control actuation systems and Systems Control Electronics for all current and future aircraft models.


Position Responsibilities:

  • Work to ensure world-class Hydraulic Systems equipment by collaborating with other organisations such as Aerodynamics
  • Performance and Stability & Control, Structures, Flight Deck Crew Operations, Pilots, Electrical Systems, Systems Stress, Customer
  • Services & Airline Customers, Manufacturing, Flight Line Operations, Supplier Management, Airplane Safety and many others.
  • Developing and validating requirements and interface definitions.
  • Creating new detail design.
  • Conducting various types of analysis and/or simulations, use of CAD systems such as CATIA V5, and math modelling with tools such as Simulink, Matlab, and EASY5.
  • Verifying designs and performance via component, system-level and airplane-level testing.
  • Participate in design reviews and engage in supplier coordination.
  • Participate in activities related to certification of our client's products with regulatory agencies.
Experience and Qualifications:

  • Candidate must possess specialised experience designing mechanical components and assemblies, including latches, hinges, door mechanisms, locks, articulating bracketry, valves, pumps and/or actuators.
  • Degree and typical experience in engineering classification:
  • Bachelor's and 15 or more years' experience, Master's with 12 or more years' experience or PhD with 10 or more years' experience.
  • Bachelor,Master or Doctorate of Science degree from an accredited course of study, in engineering, computer science, mathematics, physics or chemistry.
  • Working experience with major airframers or major hydraulic components / systems suppliers is preferred.
  • Fluent English, with good communication skills.

 
Job Number: BH-57-2
Job Location: Shanghai, China
Rate: Good Package / Negotiable. 1 - 3 year Fixed Term Contracts
Per Diem: --
Overtime: --
Duration: 1 - 3 years
Start Date: 12/19/2019
Input Date: 06/10/2025
Firm Name: STRONGFIELD TECHNOLOGIES INC
Attention: Graham Bird
Address: 1200 MCGILL COLLEGE AVE STE 1100
City, State: MONTREAL, PQ H3B 4G7
Country: CANADA
Website: www.strongfield.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Manufacturing Engineer

Description:
A Sr. Manufacturing Engineer job in Marion, VA is currently available through Belcan. In this role, you will be responsible for providing engineering support to all aspects of the Tactical Shelters product line from design and development through start-up, production, integration and test. To be considered for this role, you will have a Bachelor's degree in Manufacturing or Industrial Engineering, or a related specialized area or field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Sr. Manufacturing Engineer Job duties:

* Provides hands on engineering support to manufacturing/operations in the manufacture of tactical shelters.
* Develops manufacturing BOMs, workflow routers and work instructions for new designs and build to print projects.
* Develops tooling approaches and coordinates tool design and fabrication efforts for new product builds.
* Analyzes and develops processes for manufacturing tolerance control.
* Supports design and development of military tactical shelters covering such areas as detail fabrication, adhesive bonded sandwich panels, mechanical assembly and basic lighting and power systems.

Qualifications:

* Bachelor's degree in Manufacturing or Industrial Engineering, a related specialized area or field is required (or equivalent experience) plus a minimum of 10 years of relevant experience; or Master's degree plus a minimum of 6 years of relevant experience.
* Has mechanical aptitude and strong analytical ability to resolve technical issues, develop new products and develop creative and innovative ideas and solutions.
* Experience and working knowledge of mechanical assembly, welding of thin walled aluminum, aluminum sheet metal fabrication, CNC machining, chemical processes, aluminum skin/honeycomb sandwich panel bonding and painting materials and processes.
* Experience analyzing and developing processes for manufacturing tolerance control.

If you are interested in this Sr. Manufacturing Engineer job in Marion, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 305939
Job Location: Marion, VA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Structural Analysis

Description:
Chipton-Ross is seeking a Staff Engineer Structural Analysis for an opportunity in El Segundo, CA.

RESPONSIBILITIES:
The selected candidate will perform structural analysis on metallic and composite airframe structures.
Essential Functions:
• Develop solutions to difficult problems that are thorough, imaginative, practical, and consistent with program objectives.
• Coordination and clear communication with other disciplines during the development of design solutions.
• Evaluation of engineering products for conformity to standards, procedures, and specifications.


REQUIRED EXPERIENCE:
• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 14 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 12 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.

Preferred Qualifications:
• Experience working on military aircraft

EDUCATION:
BS degree in Engineering (Aerospace, Mechanical, or Civil)
School must be accredited.

HOURS:
9/80 workweek.

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.

Employment will be contingent on clearing a drug screen and background check. Both must clear prior to start date.
 
Job Number: 188285
Job Location: El Segundo, CA
Rate: $90/hr
Per Diem: Yes
Overtime: Yes
Duration: 12 mths.
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: CHIPTON ROSS
Attention: Melody Mullins
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analysis Engineers - Many Needed

Description:
Active Secret Clearance
• BS degree in Engineering (Aerospace, Mechanical, or Civil) and a minimum of 14 years of experience in Aerospace structural analysis or MS degree in Engineering (Aerospace, Mechanical, or Civil) with 12 years of experience.
• Experience in Metallic or Composite Structural Analysis of primary and secondary aircraft structures.
• Experience in Structural Analysis Methods and documentation, including hand-sheet analysis, as well as the development and manipulation of large FE Models using NASTRAN, FEMAP or other FEM tools.

Preferred Qualifications:
• Experience working on military aircraft

Email resume to: mmccarthy@pdstech.com
 
Job Number: North CA - stress
Job Location: El Segundo, CA
Rate: $90.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Structural Analyst

Description:
A Structural Analyst job in Kent, WA is currently available through Belcan with one of our Aerospace clients. You will be responsible for structural loads, dynamics and analysis of vehicles which will land people and payloads on the Moon. You will also perform finite element analysis at the vehicle and component levels, design optimization, structural testing, and verification. To be considered for this role, you will need a Bachelor's Degree in Mechanical, Aerospace or Civil Engineering. This is a great contract opportunity with a great company.

Structural Analyst Job duties:

* Analysis of primary and secondary spacecraft structures
* Integration of structural analysis with loads and dynamics environments
* Finite Element Model development, refinement, validation, and correlation to tests
* Strength checks and analysis report generation
* Test and verification plan and report generation
* Support configuration development and trade studies

Qualifications:

* Minimum of a B.S. degree in Mechanical, Aerospace or Civil engineering
* Solid foundation of structural static/dynamic fundamentals
* Passion for spacecraft structural/environmental loads development/validation
* Ability to solve a variety of static and dynamic structural problems using physics-based analytical methods (hand calculations, in-house tools, and 3rd party commercial analytical tools)
* 7+ years of experience with aircraft, spacecraft, launch vehicle, or automotive in some of the following areas: External loads; Vibro-acoustic analysis; Analysis using Nastran, Ansys, Abaqus, LS-Dyna, or Optistruct
* Vehicle load path definition and strength analysis desired
* Analysis of metallic and/or composite structures (skin-stringer, fittings, sandwich panels, etc.)
* Composite design and analysis skills in any thermoset, thermoplastic, metal matrix and ceramic matrix composites
* Experience with ProEngineer Wildfire 4 / Creo Parametric or greater
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

If you are interested in this Structural Analyst job in Kent, WA, please apply via the 'apply now' link provided. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.

 
Job Number: 305517
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sustainment / Test Engineer

Description:
Inconen is looking for a Sustainment / Test Engineer for our client, a well-known Aerospace Company, in Brea, CA.

Job Summary:
1. Manage complex projects in development, coordination and conducting of technical reliability studies and understands and can develop and analyze, reliability test plans.
2. Understands how to analyze reliability field data Recommendation of design or test methods and statistical process control procedures for achieving required levels of product reliability.
3. Compilation and analysis of performance reports.

Job Description:
1. The position is for a Sustainment - Test Engineer to lead our Engineering Supply Chain Projects.
2. In this role, you will lead the planning and execution of supply chain work transfer projects and assist suppliers in manufacturing systems, parts and assemblies or supplier parts.
3. You will also work on multiple work transfer projects with suppliers to establish the requirements, quality standards and adopt most efficient techniques to support manufacture parts to print that ensure quality.
4. You will conduct the project planning, test planning, test procedure/report development and execution efforts to meet the goals of work transfer projects.
5. You will be an active participant in the Company Supply Chain transformation.
6. This position is based at our clients site in Brea, CA.
7. Lead over all planning and execution of work transfer activities to support projects aimed at cost savings and solving current/future production issues.
8. Support the fabrication of complex machined parts and sub-assemblies by providing technical expertise and support for suppliers.
9. Experience with component testing, FEA, Stress analysis & Material properties.
10. Expertise with component level DFMEA - PFMEA for Aerospace parts.
11. Develop Test plans and procedures to verify and validate the parts meet design specifications and requirements.
12. Conduct Engineering analysis and testing to confirm design meets requirements.
13. Prepare part risk assessments and conduct them with the suppliers.
14. Review manufacturing processes to insure they will yield parts compliant to engineering drawings and specifications.
15. Coordinate with various departments and team members to understand design intent and communicate to the suppliers.
16. Review suppliers manufacturing capabilities.
17. Assist suppliers in clarifying requirements, resolving problems related to the manufacture of parts.
18. Review product design specifications and provide technical guidance to suppliers.

Required Qualifications:
1. Bachelor’s Degree in Mechanical Engineering AND 7+ years of Sustainment/ Test Engineering experience.
2. Strong test planning background, analytical skills, able to infer engineering schematics and communicate design intent.
3. Expertise developing test plans, procedure and reports.
4. Must have experience testing prototype, pilot and production parts.
5. Experience developing plans and conducting Qualification by Test, Qualification by simulation OR Qualification by Analysis as required.
6. Experience in a Supply Chain Manufacturing/Sustainment Engineering role leading work transfer projects is a plus.
7. Outstanding communication skills - both written and verbal / organizational skills, and be able to demonstrate an ability to understand complex design schematics/procedures
8. Experience in the aerospace industry.
9. Excellent collaborative, interpersonal and presentation skills, ability to influence.
 
Job Number: 12587
Job Location: Brea, CA
Rate: $60.00/HR
Per Diem: No
Overtime: Possible
Duration: 6 mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
System Integration Laboratory (SIL) Technicians

Description:
System Integration Laboratory (SIL) Technicians must be capable of working from engineering drawings, electrical and electronic schematics with limited guidance to fabricate, install, diagnose and repair equipment and test installations in support of System Integration Laboratory test facilities.

Must be able to fabricate wire harnesses, test boxes and associated laboratory test equipment.

Experience preferred:
• Strong electronic and electrical diagnostic and troubleshooting skills.
• Previous experience with electronic and electrical fabrication.
• Previous experience working in a laboratory or manufacturing environment.
• Mechanical and general fabrication skills.
• Previous experience working with, fabricating and terminating military wiring harnesses and connectors.
 
Job Number: 2010113788
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 1.25 years
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test & Evaluation Engineers - Structural & Mechanical Testing

Description:
1) Test conduct experience
2) Test execution knowledge
3) Test documentation generation (procedures, reports, etc.)
4) Data processing and handling knowledge
5) Test instrumentation background
Develops and documents standardized test methods and processes to ensure repeatability and productivity. Leads the development of test procedures

Email resume to: mmccarthy@pdstech.com
 
Job Number: BO-T&E AL
Job Location: Huntsville, AL
Rate: $73.00/hour
Per Diem: Possible
Overtime: Possible
Duration: 6 Months+
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: PDS TECH COMMERCIAL, INC
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Tool Crib Attendants

Description:
STS Technical Services is hiring Tool Crib Attendants in Oscoda, Michigan.

Position Overview:

The Tool Crib Attendant ensures that tools and equipment are on hand and in good working order for use by production personnel. This position tracks the whereabouts of tooling and stores tooling in a neat and orderly manner. Prepares requisitions for new or replacement tooling, supplies, and equipment to ensure an appropriate level of all required items.

The Tool Crib Attendant ensures the ability of production personnel to provide high-quality, timely maintenance and customer service by having needed tooling, equipment, and supplies available to them, in good repair and on demand.

Job Duties & Requirements:
These are generally duties considered necessary to describe the principle functions of the job as identified and shall not be considered as the detailed description of all the work requirements that may be inherent
Issues Personal Protective Equipment
Receiving and Check In deliveries from various vendors
Prepare materials for stocking
Assist plant personnel and contractors in location of materials
Maintain inventory, stock and issue requests for tooling
Conduct daily cycle count and reconciliations in case of errors
Keep tool crib organized for easy locating of parts and supplies
Receives, stores, and issues hand tools, machine tools, dies, materials, and other equipment in industrial establishment.
Issues tools and equipment to workers & maintains records of tools and equipment issued returned, manually or using computer.
Locates lost or misplaced tools and/or equipment.
Prepares periodic inventory or maintains perpetual inventory of tools and/or equipment, manually or using computer.
Inspects and measures tools and/or equipment for defects wear, visually or using micrometer, and reports damage or wear to supervisors.
Repairs, services, and lubricates tools equipment, using hand tools, spray gun, or pressurized spray can.
Deliver tools or equipment to workers, manually or using hand truck.
Mark and identify tools equipment, using identification tag, stamp, or electric marking tool
Assist the Stock Room Procurement Technician with receiving and storing equipment, parts, etc.
Other duties as assigned
Minimum Qualifications:
Basic Office, Excel and keyboarding skills
Organizational Skills
Previous tool crib experience in fast paced manufacturing environment a plus
Ability to lift and push up to 50 lbs.
Must be mechanically inclined and be able to identify different kind of machine components.
Ability to operate material handling equipment (forklift, pallet jack, etc..)
Sufficient manual dexterity to operate machines properly and safely
Physical ability to do work requiring frequent stooping, climbing stairs, twisting and bending frequently (more than 4 hours of each activity).
Sufficient visual acuity (corrected) to read instructions, operate machines, and visually inspect parts.
Good communication skills, oral and written.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 35096
Job Location: Oscoda, MI
Input Date: 06/10/2025
Firm Name: STS AEROSTAFF SERVICES
Attention: Dan Schlink
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 800/800-2400
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Turbomachinery Mechanical Design Engineer / Product Definition – Level 4

Description:
Inconen is looking for a Turbomachinery Mechanical Design Engineer / Product Definition – Level 4 for our client, a well-known Aerospace Company, in Canoga Park, CA.

** Candidates must be U.S. Citizens without Dual Citizenship **
** Candidates should have at least 5 years of turbomachinery/rotating machinery experience **

Duties:
-Perform and support mechanical design activities for rocket turbomachinery components and assemblies from concept through final detailed design.
-This position requires the development of design concepts, 3D models, and support the development and checking of detailed drawings for the manufacture of parts.
-Activity requires key interactions with component analysis, manufacturing, project engineering, quality and customer support groups.
-Develop GD&T application, tolerance analysis, systems design and integration, fabrication process identification, and synthesis of higher level requirements to component level requirements.
-Conduct trade studies and develop schedules, test plans, component specifications and procedures as reqd.
-Applicant must have prior turbomachinery design or development experience.

Skills:
-Must possess advanced knowledge of geometric dimensioning and tolerancing.
-Ability to read and interpret drawings, blueprints and related specifications.
-Ability to write clearly and concisely.
-Understanding of appropriate codes, regulations and specifications as well as applicable customer requirements.
-Knowledge of Computer-Aided Design (CAD – Pro/E, Creo2 is required with advanced modeling skills including surfacing) and Computer-Aided Manufacture (CAM) methods and techniques.
-Knowledge of Windchill PLM functionality for CAD data management and drawing release preferred.
-Knowledge of design practices, manufacturing techniques and inspection requirements.
-Knowledge of castings and airfoil parts is a plus.
-May require the use of various computer systems to produce data, analysis and reports.
-Product Definition (Drafting) specialists will be considered with requisite modeling and drawing creation skills and appropriate education and/or experience.

Education:
-Bachelor’s or Master’s degree in an appropriate engineering discipline. 5+ years of rocket propulsion design experience preferred.
 
Job Number: 14980
Job Location: Canoga Park, CA
Rate: $60.00 - $70.00/HR
Per Diem: Split Possibe
Overtime: Possible
Duration: 9 mos
Start Date: ASAP
Input Date: 06/10/2025
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Umbilical Systems Designer

Description:
An Umbilical Systems Designer job in Kent, WA is currently available through Belcan. In this role, you will be responsible for working with the Umbilical team to design, develop, and test the umbilical systems between the ground, first, and second stages. To be considered for this role, you will have a Minimum of a B.S. degree in mechanical or aerospace engineering, and 6+ years of experience with launch vehicle, aircraft, or spacecraft fluid or mechanical systems.


Umbilical Systems Designer Job duties:

* Engage in all levels of the entire design cycle of umbilical systems including conceptual design from requirements, system performance modeling, system layout and structural analysis, manufacturing and integration support, test definition and mission support
* System synthesis from initial sizing and performance calculations to full system 1-D thermo-fluid analysis and CFD as required
* Documentation of engineering deliverables including interfaces, drawings per ASME Y14.5, FEA, and other analysis
* Component level testing by coordinating test plans, procedures, fixtures, test execution, and data analysis
* Pressurized system analysis using hand calculations and FEA

Qualifications:

* Experience in 3D CAD programs (Creo Pro/E and Pro/E Piping preferred) and GD&T
* Experience in the use of FEA analysis tools (ANSYS preferred)
* Experience with pressurized system or component design
* Working knowledge of fabrication, integration processes, and quality control techniques relative to tubes and machined components
* Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

If you are interested in this Umbilical Systems Designer job in Kent, WA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity. All qualified applicants will receive consideration for employment without regard to status as a protected veteran or a qualified individual with a disability, or other protected status such as race, religion, color, national origin, sex, sexual orientation, gender identity, genetic information, pregnancy or age.


 
Job Number: 306153
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 06/10/2025
Firm Name: BELCAN TECHSERVICES
Attention: AngelaLoza
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Website: www.belcan.com
Back to Advanced Job Search