Job Search Results

464 listings were found that matched your search words: Keywords: Electrical ( Please note: We assume that all U.S. jobs are "EOE/M/F/D/V" unless otherwise noted. ) ( Listing generated 2021/01/23 Saturday 11:47AM Pacific Time by ContractJobHunter. )

Listings 1 - 464

Go To My Job Tracker

Expand all descriptions

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2581 - RELIABILITY, MAINTAINABILITY & SAFETY ENGINEER - cv, word doc only

Description:
Prepare reliability & safety studies, Failure Modes and Effects Analysis (FMEA), Aircraft Functional Hazard Analysis, Fault Tree Analysis and System Safety Analysis to certify modifications to the Challenger aircraft systems.

Participate in internal and external Design Reviews with Partners/Suppliers. You will be responsible for reviewing Partner%u2019s/Supplier%u2019s reports and ensure reliability & safety requirements are met.

Interface with various (Design Authorized Delegate) DAD disciplines Systems Engineering, Flight Sciences as part of the Integrated Design Team.

Interface with other internal and external customers (e.g. Airworthiness, Product Support, Marketing, Partners, and Certification Authorities).

Be involved with the maintenance engineering group to evaluate potential changes to certified maintenance tasks in conjunction with the DAD.

Evaluate potential modification/creation of Master Minimum Equipment List (MMEL) items with Transport Canada Civil Aviation (TCCA) and Federal Aviation Administration (FAA).

Prepare and present risk assessments for continued airworthiness queries.

Have at least 15 years of experience in the field of aircraft reliability/safety and in particular the following:

Creating and reviewing System safety assessments that meet the requirements of ARP4761.

Experience in evaluating in-service issues which are subject to safety.

Review and propose different certified maintenance task intervals for previously certified systems.

Experience with Continued Airworthiness Risk Assessments (CAA).

Experience in creating and proposing changes to the MMEL for TCCA and FAA.

Have experience in applied aerospace reliability engineering for mechanical and electrical components including reliability prediction.

Have completed various types of aircraft level assessments such as Particular risk analysis (rotor burst, tire burst) and zonal analysis.

Experience with ARP4754 is considered an asset.

Must be familiar with common reliability and safety processes and tools to perform the above mentioned tasks (e.g. Reliasoft, CAFTA.).

Experience with civil aircraft and civil airworthiness regulations is mandatory (TCCA, FAA, EASA).

Excellent comprehension and applied skills with FAR/JAR 25.1309 and all associated guidance material.

Good writing skills and communication skills in English is essential for the position.

Must possess the ability to work with minimum supervision and be a team player.

Must also be a person with initiative, a strong sense of responsibility and good engineering judgment.
 
Job Number: 2581
Job Location: Montreal, Canada
Rate: 60.00 US
Per Diem: Paid – 3 Mths Only - @ $225 per. Wk
Overtime: Paid – NOT at 1.5
Duration: 18+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2604 - LIAISON ENGINEER (MRB) - cv, word doc only

Description:
Disposition documentation to resolve fit, form or functional issues on A/C components and Interiors.

Support to Production, Design Engineering, Procurement, Methods and Quality in coordinating resolutions to
issues.

Review & trouble shooting of all Aircraft Systems in conjunction with Design Engineering as required.

Review & disposition of A/C Interior issues in conjunction with Design Engineering as required.

Review & prepare disposition on Green Aircraft issues and Create Repair Engineering Orders, as required.

Obtain & Interface with Design Engineering experts on appropriate issue resolution.

Provide status, updates & keep current on information regarding manufacturing changes & problems.

Support production and Methods as required.

Formal education to degree level in mechanical/aerospace engineering or related field, coupled with a minimum
of one year MRB experience or three years design experience in a Mechanical or an Aerospace environment /
College degree in mechanical/aerospace engineering or related field, coupled with a minimum of three year
MRB experience or five years design experience in a Mechanical or an Aerospace environment

Requires good organizational, communication and interpersonal skills and command of the English language.

Must have a good knowledge of aircraft structure & system installation technical requirements.

Interior completion and Electrical & Systems experience would be an asset.

Requires an energetic person with a high sense of commitment, and willing to accept responsibilities while acting independently in a high-pressure partner/supplier team environment.

Position is for second shift and/or weekend work requirements.

Previous CATIA, Design and MRB experience including support to production would be an asset.

***PLEASE NOTE: 3 day shift ; 2 Evening shift; 2 night Shift; 1 Weekend shift***
 
Job Number: 2604
Job Location: Canada
Rate: 56.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2608 - CABIN ELEC. SYS. INTEGRATOR - cv, word doc only

Description:
Support production and troubleshoot cabin systems on aircraft when required, to minimize issues impact on customer and/or in production.

Document the issues in order to allow a fast resolution including the analysis of electrical schematics and technical requirements as well as the interaction with the different systems suppliers.

Integrate, test and troubleshoot cabin systems such as the Cabin Management, Entertainment, Camera, Lighting or Security.

Work with different functions to plan, organize and run system development tests.

Provide visibility daily to your supervisor on the progress of the testing, the production support and the issue encounter.

Support other departments such as Production, Customer Support, Program Office and Product Planning.

Support change requests made by the Production team as well as change proposals made by customers.

Prepare the required documents, such as technical specifications, block diagrams, functional test engineering requirements (FTER) and test definition sheets (TDS).

Manage, review and approve the deliverables of the Electrical System Suppliers.

Prepare systems definition documentation such as ESSDs and wiring diagram and certification documentation for cabin systems.

Some travel may be required to support production in Client sites outside of the city.

Electrical or software engineering bachelor degree and at least three (3) years of relevant experience in aircraft testing and troubleshooting;

**This position is also open to New Grads in Electrical Engineering**

Cabin systems experience is an asset,

Familiar with FAR 25 requirements and the qualification rules pertaining to avionics/electrical systems.

Working experience using XML, embedded system programming, SNMP, HTML 5 and personal electronic device application is an asset.

Working experience with IP addressing verification, network topology (including wireless LAN), troubleshooting network tools (e.g Wireshark), telephony (SIP), voice over ip (VOIP) and quality of service (QoS) is an asset.

Have experience in dealing with a supplier base.

Have a working experience using AutoCAD, ECAD, CATIA and MS Office.

Must be bilingual (English and French), both written and spoken.

Must be able to work under minimum supervision, enjoy teamwork and have project organization skills.

Must also demonstrate initiative, a strong sense of responsibilities and good technical judgment.

Individuals having a previous experience in testing and integration of interior systems for business aircraft will be preferred.

Position is for evening or night or weekend shift with 3 day shift ; 1 Evening shift; 1 night Shift; 1 Weekend shift.
 
Job Number: 2608
Job Location: Canada
Rate: 53.00 US
Per Diem: Paid - 3 Mths only
Overtime: Paid - NOT at 1.5
Duration: 6+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
2625 - ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS)

Description:
Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS

Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical

Support Production; respond to Non-Conformance-Reports (NCR)

Provide technical assistance to engineering staff and contribute to completion of project milestones

Provide technical support for EWIS parts qualification

Apply knowledge to provide solutions to a variety of technical problems of moderate scope and complexity, using a combination of judgment with defined practices and procedures.

Bachelor degree in Engineering in a related field: Avionics and or Electrical specialization is an asset

Minimum of 5 years of aerospace experience in EWIS and/or Avionic components

Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements

Intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installations and maintainability requirements

Have an excellent verbal and written communication skills, and computer skills (PC/MS Office) are required

Must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative

Have a good knowledge of Catia V5

Have a good Avionic and/or EWIS MRB approval knowledge and understanding, an asset.
 
Job Number: 2625
Job Location: Canada
Rate: 52.00 US
Duration: 12+ Mths
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TDM TECHNICAL SERVICES
Attention: CV Recibe
Address: 88 ST REGIS CRES N
City, State: TORONTO, ON M3J 1Z3
Country: CANADA
Phone: 416/777-0007
Fax Phone: 416/777-1117
Website: www.tdm.ca

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
ASIC/FPGA (VHDL) Design Engineer

Description:
Our client is seeking a motivated candidate to work on implementation of digital logic for space applications. This position is based at our Space Park campus in Redondo Beach, CA. Duties include VHDL design of ASIC and/or FPGA logic, verification via simulation and emulation (lab testing), synthesis, and timing analysis.


Additional responsibilities include:

Designs and develops circuits used in electronic devices. device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information

Qualifications:

 Basic Qualifications:

- Bachelor’s Degree in Electrical or Computer Engineering from an accredited institution with minimum of 14 years of experience with Logic Design in VHDL or Verilog; or 12 years of experience with Masters Degree
- Must have the ability to obtain and maintain an active Government clearance

Preferred Qualifications:

- Hands-on lab experience with testing of digital hardware is highly desired
- Experience with Digital Signal Processing (DSP)
- 15 years or more of digital Logic Experience
- Security Clearance (any level)
 
Job Number: x20200041
Job Location: Redondo Beach, CA
Rate: $90/hr
Duration: up to 1 year
Input Date: 11/14/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Advanced ASIC/FPGA Engineer

Description:
An Advanced ASIC/FPGA Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for definition, design, verification and documentation for ASIC (Application Specific Integrated Circuit) and/or FPGA (Field Programmable Gate Array) developments. To be considered for this role, you will have a Bachelor's degree in Electrical or Computer Engineering, or a related specialized area or field, plus a minimum of 5 years or relevant experience. A current active Department of Defense Secret security clearance is required at the time of hire.

Advanced ASIC/FPGA Engineer Job duties:

* Determines architecture, system simulation and detailed design approach.
* Defines module interfaces and all aspects of devise design and simulation.
* Evaluates the process flow including but not limited to high level design, synthesis, place and route, timing and power utilization.
* Creates test and simulation plans that establish functional criteria.
* Verifies test results and analyzes performance.

Qualifications:

* Proficient in the principles and techniques of ASIC/FPGA design.
* Proficient in ASIC/FPGA design tools.
* Proficient ability to recognize and clearly report information relevant to sound ASIC/FPGA design.
* Proficient use and understanding of ASIC/FPGA engineering concepts, principles, and theories.

If you are interested in this Advanced ASIC/FPGA Engineer job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298919
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Electrical Systems Engineers

Description:
STS Technical Services is hiring Aerospace Electrical Systems Engineers in Oklahoma City, Oklahoma.

Job Duties:
Responsible for design, analysis, and substantiation of STC projects for Air Transport Aircraft
The Electrical Engineer will work under the direction of a more Senior Design Engineer
Engineer will work on green aircraft and aircraft systems such as GPS, TCAS, ATC, ADS-B, SATCOM, Radar, and EO/IR, and their associated controllers, annunciators and antennas
Work location is at the Oklahoma City airport
Essential Qualifications:
2-5 years of experience
Knowledge of general aircraft structural drawings
Construction of Block Diagrams, Wiring Diagrams, Wire Routing Diagrams, STC kit Manufacturing Diagrams in AutoCAD or similar CAD systems
Performing Surveys of customer aircraft to determine design requirements
US Citizenship
Preferred Qualifications:
Knowledge of ATA Drawing & Document Standards
Knowledge of 14 CFR Part 25 Aircraft architecture
Knowledge of industry standards, connectors, accessories and bus logic/ levels
Knowledge of FAA STC Certification process
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34566
Job Location: Oklahoma City, OK
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Aerospace Engineer - Air Systems

Description:
We are currently looking for an experienced Air System Engineer to fill an opening with an aerospace company in Renton, WA. Interested candidate should have strong knowledge of flight test operations and flight certification, including a familiarity with aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.

Responsibilities of the Air Systems Engineer
Support Flight Testing Activities, including reviewing test plans and preparation activities.
Help determine test specifications (based upon system architecture).
Attend Ground/Flight Test briefing and debriefings.
Participate in Test Readiness Reviews and ensure on-time engineering deliverables.
Generate developmental engineering drawings and instrumentation change requests as required.
Monitor live flight data, typically via telemetry, during flight test on aircraft.
Create and review Aircraft Restrictions and Aircraft Troubleshooting.
Coordinate with suppliers to review technical data, certification requirements and troubleshoot any issues with supplies.
Process, analyze, and draw conclusions from post flight data.
Identify non-conformances, quality escapes, etc. to create rejection tags.
Document flight test design problems for long term fix.
Generate and review appropriate limitations documentation.
Write flight test results reports.

Requirements
Four (4) years aerospace engineering experience in air systems, including experience in aircraft cabin temperature controls, low pressure cabin air distribution, avionics cooling, cabin pressurization, fire protection and anti-ice systems.
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Solid leadership skills as well as people management skills.
Strong analytical skills, with an ability to troubleshoot, problem-solve and effectively and efficiently make decisions.
Excellent communication skills (oral, written, presentation) with both external and internal team.
Good project management skills, including the ability to take ownership for accomplishing assigned tasks. Results-oriented planner and delegator who ensures that goals are met. Able to set priorities and keep to projected schedules.
Comfortable and effective working in Microsoft Office and the ability to quickly learn new software and systems.
 
Job Location: Renton, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Structural Analyst

Description:
The Airframe Structural Analysis Group is responsible for the structural integrity of the airframe fuselage, landing gear and propulsion installations and all other attachments to airframe fuselage, including electrical, controls and dynamic systems attachments.

Responsibilities cover composite and conventional structures and extend from conceptualization on through development, manufacturing and field service support.

Specific functions include:
• Static structural analysis and Margin of Safety determination,
• Fatigue and fracture mechanics analysis of critical interfaces,
• Determination of airframe component replacement and / or retirement times,
• Specification and design of airframe related static and fatigue tests,
• Field support and
• Formal engineering documentation.

Education requirement: B.S.in M.E., A.E. or C.E., M.S. or M.E. preferred

Work Experience
Required:
• Minimum of 12 years’ experience in the functions described above.
• Strong familiarity with Finite Element Modeling of airframe structure for static and fatigue purposes.
• Excellent oral and written communication skills

Software Experience:
• NASTRAN/PATRAN or equivalent FEM,
• Catia
• MS Office applications.

Travel to Forth Worth for a week may be necessary for familiarization after the first 6 weeks of work.

Secret Clearance preferred but not required.

Must be US Citizen.
 
Job Number: 1910110199
Job Location: Stratford, CT
Per Diem: split
Overtime: possible
Duration: 15 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Airframe Wiring Designer

Description:
Airframe Wiring Designer

POSITION OVERVIEW

Our Client is a leading international engineering company looking for engineers to service the Aerospace sector. They are looking for Airframe Wiring Designer for FARA project.

LOCATION

Fort Worth, Texas

RESPONSIBILITIES

• This position applies to wiring integration work performed on a new product development.
• Wiring harness-system integration designer coordinates efforts with Electrical/Avionics and Aircraft Integration Team areas.
• Develop 3/D harness layouts in CATIA V6 utilizing CHS data files.
• Interface with customers and cross functional team members as well as provide design, development and air vehicle support.

REQUIREMENTS

• Required Skills:
• Microsoft software suite applications such as Excel, Word, PowerPoint, etc.
• 3,000 hours Capital Harnesses Systems (CHS) – Mentor Graphics - experience in aircraft design is required.
• ENOVIA and CATIA V6 experience.
• Ability to interpret engineering blue prints and produce accurate harness model representations.
• Familiarity with 3D models of various components / connectors from library.
• Good communication skills both oral and written.
• Must have good personnel coordination abilities.
• Must be a good team player.
• Education: BS / MS in Electrical / Electronics / Aerospace Engineering, degree preferred.
• Years of Experience: 5+ years of Electrical wiring design / analysis experience. Experience with Catia V6, Enovia 2013x and CHS are required.
 
Job Number: 225
Job Location: Fort Worth, TX
Rate: Open
Per Diem: no
Overtime: 0
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: NSR GROUP
Attention: Brooke Burns
Address: 655 METRO PL S STE 600-44
City, State: DUBLIN, OH 43017
Phone: 614/798-0671
Fax Phone: 614/439-4932
Website: www.nextsr-j.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Assembler / 2nd shift - no clearance FL

Description:
167979 Job Title: Assembler

Work Site Address: Clearwater, FL 34677
Job Number: 3528-1
Max Pay Rate: $18.00/hr
Start Date: 4/13/2020
End Date: 3/27/2021
Position Type: Contract

Job Summary:
Plan, lay out, assemble, wire and solder complete electrical/electronic and mechanical equipment and apparatus such as PC boards, controls and control panels, assemblies. Read and interpret schematics and wiring diagrams to perform point-to-point assembly, where assemblies and subassemblies require wiring and soldering of large masses of wires in confined spaces

• Uses microscope to verify correct part placement and orientation, manually align parts before soldering and perform post re-flow inspection and touch-up.
• Able to identify and touch up poor wetted solder joints, solder voids / insufficient solder, solder shorts/ bridges, misaligned parts / leads, tombstoned and or billboarded components and any out solder defects that may occur during the SMT operation.
• Must be able to read instructions and identify standard SMT components.
• Must be able to work in a fast-paced environment where some overtime may be required.
• Must be able to sit for long periods of time and focus on tedious tasks.
• Must have basic computer skills and have the ability to use several windows based programs as part of your daily routine.
• Obtain all necessary information to perform job assignment and report any discrepancies to appropriate personnel
• Perform electrical/electronic and mechanical assembly tasks working as a member of an assembly team as assigned

• Must have a minimum of 1 year of experience in a similar position and have above average surface mount and fine pitch soldering skills.
• Ability to work under a microscope for long periods of time to perform inspection / solder repair.
• Must be able to read and interpret assembly drawings.
• Strong communication and organizational skills and ability to work in a team oriented environment.

Desired
• Experience working in a LEAN Manufacturing environment
• Strong leadership, mentoring and training aptitude
• IPC-610 Certification
• IPC J-STD-001 Certification

Skills: Category Name Required Importance Experience
Technical Skills Surface Mount Technology Yes 5 1 - 2 Years

Qty 3 positions
Pay Rate $16-$18/hr.
2nd Shift position
 
Job Number: LMRMS-3528-1
Job Location: Clearwater, FL
Rate: 16-18/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionic TEST Technician / MUST have C-130J testing experience - no clearance URGENT SC

Description:
167551 Job Title: Avionic Technician

Work Site Address: Greenville, SC 29605
Job Number: 3198-1
Max Pay Rate: $29.00/hr
Start Date: 2/24/2020
End Date: 2/24/2021
Position Type: Contract

Job Summary:
This position is for an Avionic TEST Technician:
Performs operational checks, troubleshoot and repair electrical and avionics systems in a quality manner and ensure the integrity and correct operation of affected avionics/ electrical systems affected during modification and maintenance of aircraft.

Essential Functions (Other duties may be assigned as required)
• Reads and interprets engineering drawings, technical manuals, wiring diagrams understanding symbols flags and general notes.
• Performs operational checks and troubleshoots essential navigation and communication systems such as RADAR, TACAN, ADF, UHF, VHF, HF, VOR/ILS and systems such as aircraft fuel, aircraft hydraulic, aircraft lighting, aircraft landing gear, aircraft ordnance, engine fuel, engine oil, engine propeller and the entire electrical power distribution.
• Works with several types of measuring devices and test equipment required for operational/functional checks and troubleshooting of aircraft electrical and avionics systems.

Qualifications and Education Requirements
MUST have C-130J testing experience

Skills: Category Name Required Importance Experience
Areas of Expertise C-130J Yes 1

Qty 1 position
 
Job Number: JEG-3198-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Avionics & Electrical Design Engineers

Description:
SolidWorks aircraft electrical and avionics upgrades

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Midwest
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

Avionics Electrical Engineers

Description:
Jets experience a plus
 
Job Location: Southeast
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Software Engineer

Description:
seeking a talented and motivated Avionics Software Engineer to join our Avionics Team. The ideal candidate will have experience with software development programs in aerospace or similar field. We are looking for someone who enjoys working in an embedded software environment, with an emphasis on safety-critical aerospace projects.

Required Knowledge/Experience
• Experience with C and C++ embedded software
• Experience with aerospace software projects
• Experience with networking, Ethernet packet generation and parsing
• Experience with MATLAB, Simulink


Desired Knowledge/Experience
• Experience working with Interface Control Documents
• Experience working with XidML standard and INEA formatted data
• Experience working with flight simulators
• Experience in creating written documentation
• Experience with the Atlassian software project management suite including JIRA, Bitbucket (Git), Confluence, and Crucible



Responsibilities
• Develop and maintain internal tools to help with simulation and mission control activities
• Actively participate in code reviews, requirements development, internal audits, and other software-related development activities
• Monitor program performance after implementation to prevent reoccurrence of program problems and ensure efficiency of operations
• Participate in risk management meetings


Educational Requirements:
Must have a Bachelor of Science degree in Software Engineering or a related engineering discipline from an accredited university, or equivalent combination of work experience and education

Professional Requirements:
• 4 or more years of software development programs in aerospace or similar field
• Experience with safety critical embedded system hardware and software
• Experience with real-time operating systems
• Strong foundation of fundamentals of electrical engineering
• Strong organizational and written communication skills
• Applicants must be U.S. persons as defined by the ITAR (22 CFR §120.15)


The Structures Company is an AA/EOE.
 
Job Number: 363
Job Location: Mojave, CA
Rate: OPEN - **DOE**
Per Diem: Yes
Overtime: Possible
Duration: 10+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cabler Assembler - no clearance CO

Description:
Job Title: Cabler Assembler

Work Site Address: Colorado Springs, CO 80909
Job Number: 2475-1
Max Pay Rate: $17.50/hr
Start Date: 11/4/2019
End Date: 2/3/2020
Position Type: Contract

Job Summary:
This position will perform a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as cables and harnesses.

• Production of wire harness and cable assemblies using hand and/or power tools (including specialized crimpers, drills, soldering tools, screwdrivers, torque wrenches, wire strippers, precision measuring instruments, etc.)
• Daily cable and harness techniques (wire cutting, stripping, cable prep and layup, connectorization, crimping, soldering, jacketing, braiding, molding, use of lacing tape and spot ties for open wire bundles, testing, etc.)
• Comfortable building Cat5e/Cat6 cables
• Ability to read and understand the customer drawings, parts list, wire list, specifications and assembly router for step-by-step instructions on how to manufacture the wire harness and cable assembly
• Make continuity checks on work in process and completed assemblies
• Conduct in-process inspections on product in accordance with quality specifications
• Work collaboratively with Management team to correct and improve upon any documents related to the assembly process

Qualifications and Education Requirements
No Degree is Required
Minimum requirements
• Ability to read and comprehend procedures written in English
• Displayed comprehension of assembly practices and technologies
• Familiarity with assembly tools, processes, and terminology
• Experience with proper pinning, crimping, and stripping methods
• Ability to distinguish colors is required
• Technical knowledge of electronics and mechanical designs; must be able to read and understand customer drawings
• Understanding of the application and functioning of test equipment
• Good verbal and written communication skills
• Individual must be able to work at the pace necessary to meet customer demands with minimal supervision
• Understanding or experience with regulatory requirements and general safety
• Self-motivated team player.
Additional requirements
• IPC Solder and Rework Certified a plus
• Minimum 3 years’ experience with assembly of electrical wiring harnesses or equivalent assembly experience
• Lift up to 30 pounds.

Skills: Category Name Required Importance Experience
Soft Skills Communication Skills Yes 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 1 2 - 4 Years
Technical Skills Manufacturing Experience Yes 1 2 - 4 Years
Technical Skills Wireharness Print Reading Yes 2 2 - 4 Years


Qty 2 positions
 
Job Number: LMRMS-2475-1
Job Location: Colorado Springs, CO
Rate: 17.50/hr max
Duration: 4 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Certification Engineer - Avionics and Electrical

Description:
Certification engineers will work closely with multiple design engineering and test teams to ensure designs comply with all federal airworthiness regulations. This position requires a solid understanding of aircraft systems, system development, and industry-specific certification processes. It is preferred that this individual be an FAA DER or candidate. The most important traits are attitude towards the project, hard work ethic, and being able to self-manage and learn new skills. Forward thinking will be highly regarded as well.

The Avionics and Electrical Systems Certification Engineer will be responsible for certification aspects of some or all systems and equipment related to:
• Communications
• Electrical Power
• Indicating and Recording Systems
• Lights
• Guidance, Navigation, and Surveillance
• Cabin Systems
• Systems Integration
• Air Vehicle Wiring

Responsibilities
This position will be responsible for:
• Determining and interpreting the certification basis and establishing compliance strategies – including means and methods of compliance.
• Developing, reviewing, and approving certification-related documents, including:
• Issue Papers, Special Conditions, Equivalent Levels of Safety, etc.
• Certification Plans and Summaries
• Test Plans and Reports
• Design and Analysis Reports
• Requests for Conformity, Statements of Compliance
• Working with and mentoring multiple engineering teams with a mix of aerospace and non-aerospace backgrounds to:
• Establish relevant design development and certification plans that will support Type Certification.
• Convey and document requirements in a way that clearly breaks down the regulations and guidance material.
• Develop engineering specifications for avionics and electrical systems and equipment.
• Review designs, develop solutions, and ensure compliance with the airworthiness standards.
• Planning out test campaigns, overseeing test article fabrication, and witnessing tests in order to demonstrate that applicable designs show compliance with airworthiness standards.
• Interfacing with certification authorities as required (FAA, EASA, etc.).

Required
This position requires candidate to have or be:
• Expert-level understanding of design standards and verification methods for electrical systems and equipment.
• Expert-level understanding of RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment.
• Previous FAA certification experience with electrical systems and equipment.
• Basic knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP4761, and SAE ARP4754A.
• The ability to question traditional assumptions in the application of regulations, guidance material, and engineering specifications.
• The ability to read, review, and create technical schematics, engineering specifications, and engineering drawings.
• At least 10 years of relevant aviation or aerospace industry experience.
• A Bachelor of Science in an applicable engineering discipline.
• Proficient in English.
• Proficient with Microsoft Office products.

Desired
The ideal candidate for this position will have or be:
• An FAA Designated Engineering Representative (DER) – Systems and Equipment (Electrical Equipment).
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 experience preferred.
• Experience in testing including instrumenting, data acquisition, and documenting and analyzing results.
• Experience and involvement with industry groups to develop consensus standards.
• A private pilot certificate or higher.
• Familiar with Dassault Systemes engineering and management tools.



The Structures Company is an AA/EOE.
 
Job Number: 379
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Chief Electrical Engineer - Lead

Description:
We need a talented electrical engineering lead with a demonstrated track record in designing complex electrical systems on safety critical vehicles. This lead will work closely with mechanical, software, and other cross-functional leads to oversee the electrical architecture of an all-electric VTOL aircraft, including but not limited to high-voltage powertrain systems, low-voltage electronics, and high-speed data transmission. Directing teams to optimize designs for reliability, weight, efficiency, and certification will be a focus.

Responsibilities
· Oversee the design, development and execution of the aircraft’s electrical systems.
· Own the requirements for the aircraft’s electrical architecture.
· Collaborate with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements
· Lead, train and mentor the electrical engineering team.Required
· Experience bringing electrical hardware involving high-speed and high-voltage design from concept to production.
· Strong EE fundamentals, including familiarity with high-voltage power conversion and distribution, motor control, signal conditioning and conversion, discrete semiconductor design, and low-voltage power distribution.
· Hands-on experience with building and debugging electrical hardware.
· 10+ years of related technical lead experience.Preferred
· Experience leading a team of engineers to bring a piece of electrical hardware from concept through the design assurance and certification process (DAL, ASIL, SIL).
· Understanding of RTCA DO-160 and practical design guidelines for meeting required environmental qualification levels for airborne electrical hardware.



The Structures Company is an AA/EOE.
 
Job Number: 380
Job Location: Northern CA
Rate: OPEN - **DOE**
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Cyber Security Engineers

Description:
STS Technical Services is hiring Cyber Security Engineers in Wichita, Kansas. 

Duties & Responsibilities:
Responsible for completing complex development, design, testing and Cyber Security certification assignments for Platform Information Technology (PIT) during new aircraft design and avionics modifications. Serves as technical consultant for Program Protection activities, including Trusted Systems and Networks (TSN), Cyber Resiliency, Anti-Tamper, and Information Protection. Gathers data and prepares documentation in support of U.S. Government Assessment and Authorization (A&A) efforts to obtain Cyber Security Authorization to Operate (ATO) certification.
Performs research, calculations, and estimates for projects to conform with established specifications. Develops creative, scientific alternatives during course of job assignments to reach desired outcome. Determines status of work in progress.
Maintains a high degree of proficiency in computer applications to accomplish tasks.
Consults and coordinates with other engineering and manufacturing personnel to coordinate design function and resolve technical problems. Consults with suppliers to discuss and remedy issues in a more timely and efficient manner. Consults with customer Cyber Security representatives to develop and verify requirements, mitigate risks, and devise action plans.
Requests and coordinates work performed by Engineering support groups, Experimental, Manufacturing and Supply Chain Management for the project. Instructs suppliers as to materials, equipment and hardware for utilization on aircraft in accordance with approved specifications.
Maintains contact with Product Support Engineering and production departments to resolve engineering problems impeding production and to assist in the incorporation of new design concepts and changes.
Monitors and conducts analyses on first article fabrication and operation to assure adequacy of design.
Reviews and evaluates supplier proposals for potential utilization.
Assures supervision awareness of program status, problems and successes. Provides periodic design reviews and updates presentations to management of engineering and other company organizations.
Minimum Requirements:
Current CompTIA Security+ or equivalent certification
Experience with Risk Management Framework (RMF) per DoDI 8510.01 or AFI 17-101
Ability to obtain U.S. security clearance
Professional and diplomatic demeanor
Strong sense of accountability and integrity
Excellent verbal and written communication skills
Time management skills to support multiple concurrent projects
Ability to read 2D drawings using standard industry practices
Proficient in use of standard Microsoft Office programs
Desired Qualifications:
Current Certified Information Systems Security Professional (CISSP) or equivalent certification
Current U.S. Secret or higher security clearance
Experience with military avionics and mission systems, especially encrypted radios or military datalink communications systems
3 or more years of experience with DoD cybersecurity including RMF/ATO/DIACAP certification
Bachelor’s Degree or higher in Computer Engineering, Electrical/Electronics Engineering, Cyber Security, Information Technology, or Computer Science
Benefits:

STS Technical Services offers direct deposits / electric payroll, an awesome medical insurance program, cash advances, and the opportunity to refer a friend for compensation.

We know it takes great people to do great work, so if you’re interested in joining the STS Technical Services family, we encourage you to apply on this page. Have questions? Give us a call at 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 34647
Job Location: Wichita, KS
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Database / Data Management Admin - no clearance SC

Description:
167928 Job Title: DB/Data Management Admin

Work Site Address: Greenville, SC 29605
Job Number: 3499-1
Max Pay Rate: $25.00/hr
Start Date: 3/27/2020
End Date: 3/29/2021
Position Type: Contract

Job Summary:
Enters, reviews and analyzes data within the database (database management). Ensures user data integrity, makes decisions affecting user access, documents and records attributes, and formulates database query and retrieval scripts. Reviews database design and integration of systems and provides backup recovery.

Other Possible Responsibilities:
Project Planner - Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers. Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Technical Writer - Writes, in clear and concise language, such technical documents as aircraft work documents and work instructions related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications. Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, bulletins, manuals, or similar publications.

Main job function will be data entry and data review but must also have the ability to plan and manage projects and create detailed work instructions

Qualifications and Education Requirements

Preferred Skills
Skills: Category Name Required Importance Experience
Soft Skills Create Electronic Databases Yes 7 2 - 4 Years
Soft Skills Analyzing and synthesizing qualitative data No 7 2 - 4 Years
Software Skills MS Excel Yes 1 4 - 6 Years
Software Skills SAP No 1 1 - 2 Years
Technical Skills Ability to write technical documents and end-user documentation Yes 9 2 - 4 Years
Technical Skills Data Entry Yes 9 2 - 4 Years
Technical Skills Database management Yes 5 1 - 2 Years
Technical Skills Data Analysis No 3 1 - 2 Years
Technical Skills Database Administration No 3 1 - 2 Years
Technical Skills Demonstrate Technical and Creative Skills No 3 1 - 2 Years
Technical Skills Technical Writing No 9 1 - 2 Years

Qty 1 position
Looking for verified performance to job description and required skills.
 
Job Number: JEG-3499-1
Job Location: Greenville, SC
Rate: 25/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Design Engineers

Description:
STS Technical Services is hiring Design Engineers in Milwaukee, Wisconsin.

Job Summary:

The major responsibilities of the position include designing, planning, organizing and executing Engineering projects and delivering these projects in a manner that meets, to a high degree, the quality, cost, and timing expectations of all stakeholders. This job will include directing the activities of support staff assigned to projects, as well as directing design and development efforts of outside vendors. There will be extensive interaction with OE, P&A categories, and Manufacturing to achieve results.

Essential Duties and Responsibilities:
Support cross-platform vehicle integration of electro-mechanical components; developing alternate packaging concepts during pre-development phase of program
Complete mounting and orientation evaluations for components (antenna performance, sunglare, etc)
Demonstrates working knowledge and experience of new and changing technology through continuous learning in order to develop high quality engineering products and continuously improve processes. Ability to drive results with a moderate level of guidance and direction.
Impacts quality of their own work through effectively communicating complex information with stakeholders such as designers, detailers, technicians and outside suppliers.
Solves engineering issues relating to quality, cost and timing expectations by analyzing possible solutions using technical experience and judgement with a moderate level of guidance and direction.
Provides informal guidance to new design engineer team members and delegates responsibilities to team members when appropriate.
Works effectively with cross functional teams and participate in the reduce time to market initiative by identifying, implementing and measuring the results of innovative product development techniques within the teams.
Qualifications:
Requires a Bachelor of Science Degree in Mechanical Engineering, Electrical Engineering or a related technical field
Typically requires a minimum of 3 years of related experience.
Demonstrated knowledge of engineering calculations, engineering analysis, computerized design, and computer-aided design (CAD) functions.
Motorcycle or automotive/vehicle experience is preferred.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries. Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34541
Job Location: Milwaukee, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS 2D Engineer

Description:
We are currently seeking an electrical design engineer with EWIS experience to join a diverse team of aerospace experts for an exciting new aviation project in Nagoya, Japan. Interested candidates should have familiarity with industry specifications and standards associated with EWIS, including but not limited to electrical design for different aircraft systems, wiring diagram requirement definition, ESSDs, electrical assemblies and overall system development methodologies.

Responsibilities of the EWIS 2D Engineer
Act as wiring designer as part of 2D wiring interconnection team.
Support the design, development and finalization of the aircraft design, compliant to all requirements.
Evaluate the current aircraft design with respect to compliance to the EWIS related airworthiness regulations of JCAB, FAA and EASA.
Coordinating integration of design change activities related to EWIS requirements when required.
Perform verification and compliance activities, such as Ground and Flight Tests, Design Reviews, Inspections and Analysis.
Perform all activities related to defining the ESSDs required to generate and creating Wiring Diagrams.
Manage the creation of WHR using the HDMS tool.
Support and review technical documents related to EWIS requirements and design.
Coaching and educating of other members about the EWIS domain.
Provide technical expertise and to assist in resolving the EWIS issues during any rig testing, installation, ground testing or flight testing.


Requirements

Familiarity with industry specifications and standards associated with EWIS, including but not limited to electrical design for different aircraft systems, wiring diagram requirement definition, ESSDs, electrical assemblies and overall system development methodologies.
Experience with translating from existing aircraft system schematics and wiring diagrams.
Familiar with selection of components used in aerospace wire harness construction and installation.
Experience using dedicated tooling associated with wire harness manufacturing/assembly.
Capable of resolving technical issues relating to EWIS.
Experience with ENOVIA / CATIA V5/V6 Wiring Workbench or VISIO is preferred.
Proficient at prototyping new designs and performing rework.
Experience with surface mount components is preferred.
Four (4) year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
EWIS Harness Installation Design Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services

Unique skills:
• Required Develop electrical wiring interconnect system (EWIS), capable of resolving all technical issues relating to EWIS.
• Produce and maintain wire harness assemblies, utilizing CATIA V5 Electrical and Sheet Metal Work Benches.
• Capable of interfacing with wiring diagrams, systems, and EMI/EMC requirements.
• Must have intimate knowledge of and ability to assign wires/cables to their correct harness assembly, based on EMI/EMC and system separation or system functionality requirements while meeting all installation and maintainability requirements.
• Aerospace Experience is required
• Excellent verbal and written communication skills, and computer skills (PC/MS Office) are required
• Candidate must be well-organized and able to balance multiple tasks, detail oriented, possess good judgment, and exercise initiative
• Knowledge of Catia V5 Electrical is required

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required. to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-392
Job Location: Savannah, GA
Rate: $58-$63/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Unique skills: Required Required Skills: • AutoCad, Capitol Harness &/or Mentorgraphics required • Familiarity with aircraft cabin communication, security and entertainment systems. • Experience with power distribution, lighting, switching, wire sizing and routing. • Experience with systems development, layout, logic and wiring diagram creation. • Familiarity in mechanical system design. • Analyze Electrical designs in 3D models • Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have: • Catia V5 basic navigation experience. • GVI, & GVII electrical system design experience. • 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred. • EWIS Certification familiarity & experience preferred. • Familiarity with aircraft STC procedures preferred. • Experience with electrical systems test plans and reports.


Education and Experience Requirements:

Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.


Position Purpose:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of aircraft products and services.

Principle Duties and Responsibilities:

Essential Functions: 1. Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues 2. Is consulted extensively by associates and others as a recognized authority within the field 3. Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities 4. Approach to problem solving balances technical product, cost and schedule 5. Works without appreciable direction; work is reviewed from a long-range perspective for desired results 6. Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Additional Functions: 1. Maintains a current knowledge of developments in the field of specialty and/or other related aircraft fields in order to recommend innovations to improve quality and effectiveness of company product Perform other duties as assigned.

Other Requirements: 1. Advanced degree in engineering, or related curriculum preferred
The level of technical skill and abilities appropriate for this grade will be established by each discipline
 
Job Location: GA
Rate: $60.60
Per Diem: Possible
Overtime: Possible
Start Date: Long Term
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Tara Gilbert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer

Description:
Guides successful completion of major engineering programs, or conceives research in areas of considerable scope and complexity supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin communication, security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Catia V5 basic navigation experience.
• Company electrical system design experience.
• 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
• EWIS Certification familiarity & experience preferred.
• Familiarity with aircraft STC procedures preferred.
• Experience with electrical systems test plans and reports.

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• 10 yrs in specific technical discipline or 15 yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-387
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Engineer - Liaison

Description:
A Electrical Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. You will be responsible for performing technical work along with coordinating, communicating, delivery, and project management of outsourced work between the customer and off-site Belcan Design Center teams. To be considered for this position, you must have actual work experience involving CAD tools and electrical harness and cable design. A Bachelor's Degree in Mechanical or Electrical Engineering is strongly preferred.

Electrical Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A Bachelor's in Mechanical or Electrical Engineering.
* Experience with design project management and direct customer interaction.
* Three to five years of professional design experience with electrical harness and cable design.
* Experience with 3D CAD software (Creo Schematic or Pro Diagram / Pro Harness is preferred.
* Experience with Windchill is preferred.
* Familiarity with an electrical wiring design program, familiarity with CAD.
* Understand electrical system design (wire sizing, splicing, bend radii, component mounting, connectors, CAN bus systems).
* Ability to problem-solve and multitask, high attention to detail, work well in team environment, and communicate to and from the team.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297991
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: AnthonyDonofrio
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

Electrical Design Engineers -- Many new long term programs in Missouri

Description:
Must be degreed, UG NX experience

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Design Quality Engineer

Description:
- Analyze electrical designs created in AutoCAD and Capital Harness
- Clearly document quality findings to design team and collaborate on issue resolution
- Analyze electrical harness routing created using CATIA V5 EHI

The ideal candidate will have experience in the following:
- General CATIA V5 experience is required
- Electrical Engineering degree strongly preferred
- EWIS experience strongly preferred
- Aircraft interiors electrical engineering design and/or quality experience is preferred
- Experience with 14 CFR Part 25, 91, and 135 certification relative to Cabin interiors is preferred
- Experience with systems development, layout, logic, and wiring diagram creation is preferred
- Experience with power distribution, lighting, switching, wire sizing and routing is preferred
 
Job Number: 149042
Job Location: Savannah, GA
Rate: $58/hr to $63/hr
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
RESPONSIBILITIES:
Under the general direction of the Electronic Systems Group Lead, the Electronics Engineer and the electrical engineering team designs and develops systems used in underwater sonar. The work pertains primarily to development of custom hardware and embedded firmware and software used in data acquisition and power distribution electronic assemblies that reside in underwater environments.
1. Implement assigned projects and project tasks to provide electrical and computer engineering solutions including: schematic capture, PCB/PWB design, embedded C/C++ software design, and FGPA design (VHDL preferred)
2. Work in a laboratory environment integrating electronics. Familiarity with lab equipment such as oscilloscopes, function generators, DC power supplies, and thermal chambers.
3. Support documentation, verification, and validation used in producing, evaluating, testing and processing high fidelity data acquisition systems.
4. Perform technical review, design analysis, development and selection of hardware components
5. Modify existing hardware and software for obsolescence updates and bug fixes
6. Ensure that assigned project tasks are completed, meet established technical and schedule requirements and comply with company’s quality system procedures. Identify and report quality problems in the assigned areas and recommend corrective action and/or alternative solutions to correct abnormal problems or trends that could jeopardize achievement of cost or schedule objectives.
7. Prepare design review material in support of SRR, PDR, CDR, FDR and technical audits for assigned designs.
8. Promote cordial relationships and foster and maintain a favorable business profile with customers, suppliers, co-workers, industry and professional associations, government agencies and the local community.

May perform other duties as assigned, including work in other functional areas to cover absences or relief, to equalize peak work periods or otherwise to balance the workload.

REQUIRED EXPERIENCE:
1. A Bachelor’s degree in Computer, Electrical, or Electronics Engineering is required. In special circumstances, knowledge gained through engineering related work experience may be substituted for educational requirements.
2. 3+ years of experience in custom hardware development preferred, not required.
3. VHDL utilizing Xilinx and Microsemi tool chains along with familiarity in C/C++ for microcontrollers and SoC implementations
4. Familiarity with high speed data transmission protocols (Gigabit Ethernet, PCIe)
5. Understanding of spectral analysis parameters and digital signal processing for data acquisition systems preferred
6. Git or similar version control system

Knowledge, Skills and Abilities:
1. Strong analytic and communication skills.
2. Requires the ability to interpret and communicate engineering plans and specifications. Sound knowledge of engineering theory and design criteria.
3. Effective human relation skills are essential.
4. Ability to speak, read and write the English language.

Physical Demands:
1. Exerts up to 20 lbs. of force occasionally, or up to 10 lbs. of force frequently, or a negligible amount of force constantly to move objects.
2. Employee regularly sits while using upper body movements including arms, hands and fingers operating computer equipment and other office equipment.
3. Employee occasionally stands and/or walks to go into meetings or for discussions with other administrative / office personnel.
4. Employee occasionally reaches with hands and arms in moving tools equipment and/or products as needed.

Other Work Conditions and Requirements:
1. Employee works in a quiet to moderately noisy environment.
2. Travel may be required for several days with notice via auto/air.
3. Testing aboard ship may be required from time to time.

EDUCATION:
Accredited Bachelor’s degree in Computer, Electrical, or Electronics Engineering is required. In special circumstances, knowledge gained through engineering related work experience may be substituted for educational requirements.

WORK HOURS:
9/80
Full-Time
 
Job Number: 185285
Job Location: Ashaway, RI
Rate: $55/hour
Overtime: Not specified
Duration: 6/+ mo
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: CHIPTON ROSS
Attention: Terry Jones
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
SUMMARY

Senior Electrical Engineer that will possess strong knowledge of embedded systems and be able to immediately contribute to development efforts. The successful candidate's daily duties will involve developing embedded system designs using contemporary architectures. Designs will be implemented using C/C++ for a range of applications including: serial interfaces, Radio Frequency (RF) and Video DSP, controls, data links, embedded processing, etc. Generating high quality design documentation and demonstrating proficiency at configuration management will be expected. This position requires significant knowledge of printed circuit board design, construction, and terminology as required to realize embedded systems in hardware. Strong skills in system analysis, simulation, and algorithm development are also required.

Will need a U.S. Security Clearance within 1 year of start date.

Required Skills:
A minimum of four (4) years of experience with embedded microcontroller coding in C/C++. Must have expertise in:
C/C++ language to include advanced aspects, and best practices.
One or more contemporary embedded processor architectures, e.g. ARM Cortex-M.
System analysis using tools such as Python or Matlab to develop algorithms and evaluate system characteristics prior to committing to code.
Analog and digital peripherals commonly used in embedded systems e.g. SPI Flash, MAC, ADC,etc.
Contemporary embedded toolchains such as Keil, IAR, GNU etc.
Troubleshooting embedded systems and electronics in general.
Configuration management tools such as git or svn.
Printed circuit board construction, terminology, and design practices.

Desired Skills:
MS or Ph.D. in Electrical Engineering or Computer Science
Expertise digital signal processing techniques
Analog circuit analysis and design (Spice)
Knowledge of developing in a Linux environment
Embedded Linux
Embedded RTOS
Unit testing (TDD) concept and practice
System Architecting
Project management
Education Requirements: Requires a degree in Electrical Engineering or related Science, Technology, Engineering or Mathematics (STEM) field and four plus years of related experience

Required Education:
• Bachelor of Science in Electrical Engineering or equivalent, Master’s degree is preferred.
 
Job Number: BCIN292632
Job Location: Indianapolis, IN
Per Diem: No
Overtime: Possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: YOH SERVICES
Attention: Bill Carriveau
Address: STE 100
11960 WESTLINE INDUSTRIAL DR

City, State: ST LOUIS, MO 63146-3212
Phone: 314/791-1565
800 Phone: 800/298-0666
Website: jobs.yoh.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
As part of the Completions Engineering Electrical Definition Team:
• Define and create Build Lists of interior components for aircraft
• Evaluate customization requests for engineering and manufacturing feasibility
• Analyze models to determine asset re-use or new custom engineering requirements
• Support evaluation and determination of certification strategy of aircraft
• Experience in the design of electrical components of aircraft Interior Furnishings and equipment preferred
• CATIA V5 / SmarTeam preferred
• Experience using CHS/EHI tools a plus

Essential Functions:
• Selects appropriate methods, techniques, and evaluation criteria to resolve complex engineering issues
• Is consulted extensively by associates and others as a recognized authority within the field
• Anticipates and resolves complex issues in creative and effective ways, developing standards and guides for diverse engineering activities
• Approach to problem solving balances technical product, cost and schedule
• Works without appreciable direction; work is reviewed from a long-range perspective for desired results
• Exercises latitude in determining technical objectives of assignments, and makes decisions and recommendations that are recognized as authoritative

Education and Experience Requirements:
• Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-375
Job Location: Savannah, GA
Rate: $72-$77/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

Electrical Engineer

Description:
Chipton-Ross is seeking a Electrical Engineer 2 for an opening in Avondale, LA.

RESPONSIBILITIES:
Candidate will be responsible for establishing, overseeing, and managing all activities related to assigned shipboard systems. Candidate will perform the following: Research, development, and design of electrical components, equipment, systems, and networks in accordance with all contractual requirements, military and commercial specifications; initiate procurement specifications; review and approve vendor proposals; review, comment on, adjudicate and approve vendor furnished information for translation into construction products; interface with vendors and Navy technical representatives; support vendor design reviews and testing; develop drawings and other documents IAW Mil-Specs and contract drawings; interface with other disciplines and departments to ensure a seamless integration of assigned systems into the shipboard environment; address and resolve technical issues, and make decisions on problems in his/her area of responsibility; support shipbuilding production department as required.

REQUIRED EXPERIENCE:
Bachelor's of Electrical Engineering with two years of engineering experience or Master's of Electrical Engineering with no prior experience, or similar degree background. . Previous shipbuilding experience is highly desired. A qualified candidate should be proficient in Microsoft Office applications and AutoCAD 2014.

ADDITIONAL EXPERIENCE:
It is preferred that the candidate be familiar with shipboard Interior Communications systems such as Switchboards, Telephone systems, Announcing, TV and Audio, Alarms, Indicating, etc. and have an understanding of the typical shipboard interfaces, interconnections, and integration requirements. Familiarity with electrical power distribution systems, control systems, and C4ISR systems is a plus. Current clearance is also a plus.

EDUCATION:
Bachelor's of Electrical Engineering

MISCELLANEOUS:
Applicants responding to this position will be subject to a government security investigation and must meet eligibility requirements by currently possessing the ability to view classified government information.
 
Job Number: 155942
Job Location: Avondale, LA
Rate: $42 to $46.00 DOE
Duration: 1 year
Input Date: 11/14/2020
Last Updated: 01/23/2021
Firm Name: CHIPTON ROSS
Attention: Andrew Craft
Address: 420 CULVER BLVD
City, State: PLAYA DEL REY, CA 90293
Phone: 310/414-7800 X286
800 Phone: 800/927-9318
Fax Phone: 310/414-7808
Email: acraft@chiptonross.com
Website: www.chiptonross.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-376
Job Location: Savannah, GA
Rate: $55-$60/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Assists with the planning, coordination, performance of design, analysis and liaison engineering supporting the development and production of company products and services.

Unique Skills:
• AutoCad, Capitol Harness &/or Mentorgraphics required
• Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
• Experience with power distribution, lighting, switching, wire sizing and routing.
• Experience with systems development, layout, logic and wiring diagram creation.
• Familiarity in mechanical system design.
• Analyze Electrical designs in 3D models
• Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position
• Preferred candidate will have:
o Catia V5 basic navigation experience.
o 14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
o EWIS Certification familiarity & experience preferred.
o Familiarity with aircraft STC procedures preferred.
o Experience with electrical systems test plans and reports.

Essential Functions:
• Contributes to planning, developing and coordinating of important engineering projects
• Provides specialized technical assistance to team members
• Uses advanced techniques and modified extension of theories to provide technical solutions to a wide range of difficult problems
• Determines and develops own approach to solutions within schedule and cost objectives
• Works under limited supervision; work should only be required to be reviewed for accuracy and consistency with meeting overall objectives
• Acts as liaison with representatives outside of the assigned group/area

Education and Experience Requirements:
• Bachelor's Degree in engineering or related curriculum required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Five (5) ys in specific technical discipline or ten (10) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
 
Job Number: 24-377
Job Location: Savannah, GA
Rate: $60-65/hr
Per Diem: Yes
Overtime: Yes
Duration: 1+ years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Completions

Description:
Required Skills:
AutoCad, Capitol Harness &/or Mentorgraphics required
Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security and entertainment systems.
Experience with power distribution, lighting, switching, wire sizing and routing.
Experience with systems development, layout, logic and wiring diagram creation.
Familiarity in mechanical system design.
Analyze Electrical designs in 3D models
Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position Preferred candidate will have:
Catia V5 basic navigation experience.
GV, GVI, & GVII electrical system design experience.
14 CFR Part 25, 91, and 135 Certification Experience relative for Cabin Interiors preferred.
EWIS Certification familiarity & experience preferred.
Familiarity with aircraft STC procedures preferred.
Experience with electrical systems test plans and reports.


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 148781
Job Location: Savannah, GA
Rate: $59/hr to $65/hr
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Power

Description:
A Power/Electrical Engineer job in Anaheim, California is currently available through Belcan. This is a contract role with one of aerospace clients. You will be responsible for design and development of electrical power equipment for shipboard applications and design support of other applications. To be considered for this role, you will need to have a Bachelor of Science degree in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years experience in the design of power conversion equipment or related equivalent experience and/or training.

Power/Electrical Engineer Job duties:
* Provide power electronics engineering support for design, development, integration, operation and sustaining of electrical components, equipment and systems under moderate supervision.
* Participate in all stages of development from design through manufacturing support and system integration.
* Interpret customer specifications to define requirements for power electronics circuit and systems design.
* Starting from conceptual phase, provide detail design of switch mode power converters and inverters, transformer rectifiers, control loops and/or magnetic components.
* Perform engineering analysis of power electrical circuits and systems.
* Perform hardware bring-up and integration and support power conversion systems hardware / software integration.
* Provide complete documentation, product verification and part's list.
* Write product and test specifications.
* Provide sustaining engineering on existing products supporting manufacturing and test departments.
* Provide technical support for manufacturing, production and fielded equipment.

Qualifications:
* Bachelor of Science degree (B. S.) in Electrical Engineering, Power Engineering or equivalent from a four-year college or university; and 5 to 10 years' experience in the design of power conversion equipment or related equivalent experience and/or training.
* Must have design familiarity with power conversion topologies and electrical components IGBTs, MOSFETs and SCRs used in power switching applications.
* Circuit analysis applications, PSPICE preferred.
* Magnetics design and closed control loop design experience, a plus.
* Must be able to work as a key member of the design team with other Power Design Engineers, Digital and Analog Engineers, System Engineers and Software Engineers.
* Proven effective communication with Senior Project Management and customer representatives is essential.

If you are interested in this Power/Electrical Engineer job in Anaheim, California, please apply via the 'apply now' link provided.  Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract/temporary, temp-to-hire, and direct assignments in the engineering, IT, and professional fields. We are the employer of choice for thousands worldwide. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a team-driven Equal Opportunity Employer committed to workforce diversity. For more information, please visit our website at http://www.belcan.com.


 
Job Number: 298328
Job Location: Anaheim, CA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - Powertrain & Electronics

Description:
Seeking a talented electrical engineer to join our team designing all-electric aircraft. This engineer will work closely with mechanical, software, and other cross-functional teams. You'll be taking ownership of key electrical subsystems and printed-circuit-boards from design through prototyping and to product. This is a hands-on position. Optimizing designs for reliability, weight, and efficiency will be a focus.

Responsibilities:
• Create clear and readable schematics for digital and mixed-signal printed-circuit-boards
• Component selection for minimum mass and maximum reliability
• Investigate modern technologies for power and data transmission/management
• Work with PCB designers to create reliable and low-weight layouts
• Write requirements, participate in DFMEAs + create and carry out test and validation plans

Required:
• Strong EE fundamentals, including familiarity with:
• Power conversion (linear and switching regulators)
• High-speed digital design and layout
• Signal conditioning and conversion (ADCs, filters)
• Discrete semiconductor design (FETs, BJTs, Diodes)
• Schematic capture and PCB design
• Experience with component selection
• Hands-on experience with building and debugging hardware
• Great communication skills
• B.S. in electrical engineering or related discipline

Desired Experience:
• M.S./Ph.D. in relevant discipline
• 2+ years of working experience in relevant industry
• Familiarity with Altium Designer
• High voltage electrical design (400V+)
• Exposure to regulatory certification
• Design-for-reliability, including use of DFMEA and fault trees
• Designing for high EMI environments



The Structures Company is an AA/EOE.
 
Job Number: 381
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer - multiple openings - TX CA GA

Description:
167404 Job Title: Electrical Engineer

Work Site Address: Fort Worth, TX 76108
Job Number: 2915-1
Max Pay Rate: $64.00/hr
Start Date: 1/21/2020
End Date: 4/23/2021
Position Type: Contract

Job Summary:
Accepting applications for multiple Electronics Engineering positions within Mission Systems hardware and/or software disciplines including: Radar; Electronic Warfare (EW); Communications, Navigation and Identification (CNI); Radio Frequency (RF); Electro Optical / Infrared Radiation (EO/IR); Signal Processing; Embedded Mission Processors; Displays; and/or Weapons.

Responsibilities may include: Researching, designing, developing, and testing a variety of electronic equipment and systems, including radar and radiation detection equipment; radio, television and other communications equipment and systems; circuitry components; analog and digital computers; and control and test equipment.

Responsibilities may also include: Electronic system design, development and integration; supplier management and interaction; Laboratory test and verification; requirements management; change management; planning; unit and system level verification; system performance validation; setup and acceptance testing; affordability, part obsolescence mitigation.
Applies extensive technical expertise, and has full knowledge of other related disciplines. Develops technical solutions to complex problems which require the regular use of ingenuity and creativity.
Position may involve occasional travel and/or off-shift work.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS

Qty 10 positions
Multiple positions available in Fort Worth, TX; Palmdale, CA; and Marietta, GA.
 
Job Number: JE-2915-1ATO
Job Location: Fort Worth, Palmdale, Marietta, TX, CA, GA
Rate: 64/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Data Processing Engineer - Clearance CA

Description:
167091 Job Title: Electrical Engineer / Data Processing Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2677-1
Max Pay Rate: $90.00/hr
Start Date: 12/9/2019
End Date: 2/26/2021
Position Type: Contract

Job Summary:
Will be responsible for all aspects of system administration, implementation, and operations for assigned programs in Palmdale. Will interface with personnel in the development of data and system requirements, designs and installation. Works with instrumentation engineers to identify data processing needs and identify cost-saving solutions. The candidate must have strong analytical and troubleshooting skills and be able to work independently. Occasional extended hours and weekends are required.
The position will be responsible for ensuring data quality and that appropriate metrics are in place and utilized to support quality data products.

Tasks include:
• Receive, process and troubleshoot IRIG 106 formatted data products per established processes
• Coordinate with Instrumentation Engineering, Operations Engineering, IT administration, and leadership on issues, status and capabilities
• Diagnosis and resolution of problems encountered in the recovery of test data
• Support IT assignments as required

At this level the successful candidate will expected to be familiar with the data processing field and be familiar with server system administration and desktop support. The candidate will continue actively work to expand his or her knowledge of the discipline and of specific tasking.

Qualifications and Education Requirements
BS+4-8 YRS or MS+2-6 YRS
Desired skills
The ideal candidate possesses:
• Experience with IT infrastructure operations, computer networking, and/or software programming concepts
• Experience in data processing and network system administration
• Capability to develop, test, and troubleshoot data processing algorithms for aircraft data
• Programming in C/C++
• Certification
• Subject Matter Expert in data collection systems
• Experience working with the application Common Data Processing
• Experience with installation of Network Server systems for data processing
• Experience working in flight test
• Hardware and/or software programming experience
• Understanding of IRIG 106
• Experience with various instrumentation vendors hardware and software
• Symvionics IADS (Interactive Analysis and Display System) use and programming
• Experience with and/or knowledge of working with communications protocols, specifically Fibre Channel, MIL-STD-1553, IEE-1394, CAIS Bus (Common Airborne Instrumentation System Bus), RS-485
• Demonstrated ability to develop and implement process improvement initiatives
• Excellent communication skills
• Bachelor's degree in relevant field (electrical engineering, computer engineering, mechanical engineering, aerospace engineering, computer science, etc.)

Qty 1 position

This position is located at a facility that requires special access. This position requires occasional travel and odd-shift work.
 
Job Number: JE-2677-1S
Job Location: Palmdale, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer / Instrumentation Engineer - Clearance CA

Description:
167083 Job Title: Electrical Engineer / Instrumentation Engineer

Work Site Address: Palmdale, CA 93599
Job Number: 2678-1
Max Pay Rate: $100.00/hr
Start Date: 11/22/2019
End Date: 2/9/2021
Position Type: Contract

Job Summary:
Responsible for supporting multiple programs on technical and schedule issues with respect to aircraft instrumentation.

Will be responsible for the design, installation, and operational support activities for data acquisition. This includes designing instrumentation systems, releasing engineering documents, work instructions, supporting airworthiness documentation, monitoring fabrication activities, and supporting aircraft checkout and flight operations. The applicant will be the engineering liaison for flight test and instrumentation modification activities.

The candidate should be familiar with integrating various sensors into a data acquisition system. The position will be responsible for ensuring recorded data is correct.

This position may require travel and odd, weekend or overtime shift work on an as-necessary basis.

Qualifications and Education Requirements
BS+9-15 YRS or MS+7-13 YRS
Basic Qualifications
• Bachelor’s degree in Electrical/Electronics or Computer Engineering or related discipline.
• Experience developing instrumentation systems and sensor integration methods used on multiple aircraft
• Experience developing data acquisition systems for air vehicles

Experience with the following:
- Microsoft Office
- Electronics and electronics troubleshooting techniques and tools, including multi-meters, oscilloscopes, logic analyzers, signal generators, spectrum analyzers, and/or other common lab test equipment

Desired skills
• Using various CAD programs such as Catia, Autocad, etc.
• Using general test equipment such as oscilloscopes and spectrum analyzers.
• Understanding of IRIG 106
• Avionics bus protocols including Mil-Std-1553, ARINC-429, IEEE 1394, Ethernet and Fiber Channel
• GPS and IRIG time standards
• Video protocols and compression

The applicant must have excellent organizational and communications skills
• Applicant should have knowledge of Systems Engineering practices and concepts
• Experience with or knowledge of calibration methods for test and evaluation of both mechanical measurements and electronic sensors
• Skilled in the conversion of digital data sets to engineering units and interpretation of data for validity and error determination
• Familiarity with military aircraft technical data, maintenance practices, flight operations, military stores and munitions is a plus

Qty 2 positions
 
Job Number: JE-2678-1S
Job Location: Palmdale, CA
Rate: 100/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

Electrical Engineer II

Description:
Creo, new product design; PCB design, layout, and fabrication
 
Job Location: South
Input Date: 11/23/2020
Email: epetersen@pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer MA

Description:
167668 Job Title: Electrical Engineer

Work Site Address: Marion, MA 02738
Job Number: 3311-1
Max Pay Rate: $85.00/hr
Start Date: 2/24/2020
End Date: 2/12/2021
Position Type: Contract

Job Summary:
Researches, develops, designs, and tests electrical components, equipment, systems, and networks. Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.

Candidate must be highly motivated Test Station Development Engineer (TSDE) lead, looking to be converted into a permanent employee. The selected candidate will lead and provides individual contributor efforts for the development of test stations for the MK-48 Guidance and Control Warhead Electronics Systems (WES) development effort. This person will build and lead a team of other engineers.

For each test station to be developed, the candidate must work with the current engineering team to identify find the best solution, minimizing risk, complying with allocated cost and schedule, present the need for team members to functional level managers, lead the teams, and produce a robust and completely documented test stations.

The successful candidate needs to also be a very strong technical leader, hands-on contributor with electrical engineering development experience, a creative thinker, have the capability to build stations compliant with all specified requirements, within the allotted cost and schedule. A history of development, across a diversified team of engineers, suppliers, quality, manufacturing, etc., in all programmatic phases, is required.

For each test station development, the person will either own, or delegate the following activities:
1. Control Account Manager (CAM) with Earned Value Management in accordance with (ANSI/EIA-748)
2. Performing a combined role of technical engineering team leadership and Earned Value Management (technical, cost, and schedule integration/analysis/reporting)
3. Test station HW and SW development
4. Managing risk and opportunity
5. Conforming to Defense First Article and Qualification testing

It is highly desirable if the person is expert with Control Account Management particularly for defense contractors. Some of these CAM responsibilities/delegations include schedule planning and monthly measuring each test station development. Additional responsibilities (or delegations) for each station will include actual cost collection, variance analysis and resultant corrective action, and estimating costs at completion.
This position will require frequent meetings at the program office level, with customers, and with senior management as well as with the engineering team. Frequent bid and proposal work will be required, often times requiring considerably more than 40 work hours per week.

Qualifications and Education Requirements
BS+16 YRS or MS+14 YRS
The candidate should be energetic, able to work independently, yet thrive in a team environment and have sound theoretical and practical experience.
Other required skills are outstanding verbal and written skills, in a clear and concise manner; the ability to present in a favorable and impactful way to large audiences including internal management and external customers.

Skills: Category Name Required Importance Experience
Areas of Expertise Circuit Design No 1 < 1 Year Areas of Expertise Electrical Troubleshooting No 1 < 1 Year Soft Skills Strong Leadership Skills No 1 < 1 Year Technical Skills Develop/execute test plans No 1 < 1 Year Technical Skills Electrical Testing No 1 < 1 Year Technical Skills Electronic Testing No 1 < 1 Year Technical Skills Knowledge of Basic Mechnical/Electrical Concepts No 1 < 1 Year Technical Skills Knowledge of Complex Mechanical/Electrical Concepts No 1 < 1 Year Technical Skills Knowledge of Electrical Technology No 1 < 1 Year Technical Skills Read Electrical Schematics No 1 < 1 Year Qty 1 position Hourly Pay Rate Range $55-$85 Please note the list of Skills that are Highly Preferred
 
Job Number: LMRMS-3311-1ATO
Job Location: Marion, MA
Rate: 85/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer Sr

Description:
Electrical engineers research, design, develop, test, certify, deploy and support cutting edge products & services. These cover a very wide range from state of the art mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll be responsible for conceptualizing and designing analog and digital electronic circuit card assemblies to fully integrated systems. Your technical responsibilities involve the design and development of new products and processes throughout the product lifecycle.
Must-haves:
• Bachelor's degree in Electrical Engineering or related Engineering discipline and typically 10 or more years of relevant experience
• Demonstrated knowledge of engineering principles and practices
• Experience with Computer Aided Engineering tools
• Experience working in multi-disciplinary design & development teams
• The ability to obtain and maintain a Secret U.S. Security Clearance is required

Preferred:

• Proficiency in simulations through functional and logical models and system analysis
• Background in the Aerospace and Defense Industry
• Experience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation and analysis
• Familiarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightening (IEL)
• Knowledge of industry standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing and production processes
• Familiar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)
• Experience in digital or analog circuit design and schematic capture
• Understanding of the printed circuit board layout process and tools
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineer- Job ID 17085

Description:
We have an Excellent Contract to Hire position for an Electrical Designer to join a leading Company located in the Ashway, RI area.

**U.S. Citizenship Required.
**Candidate must be able to obtain an Active Secret Security Clearance. **
Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Major Purpose:
Design and manufacture electronic data acquisition systems for use in Anti-Submarine Warfare, ship self-defense, acoustic ranges, and geophysical exploration products. Under the general direction of the Electronics Group Lead, support digital and analog electronics design and failure analysis. The work pertains primarily to electronic circuits, embedded software, and systems concerned with measuring acoustical wave energy and providing telemetry for purposes such as communication, computation, sensing, control, measurement, and navigation. Major activities include electronics design as well as extensive use of FPGAs (Field Programmable Gate Arrays) and associated design and synthesis tools.

Essential Functions:
•Perform FPGA Design: Architecture, Algorithms, VHDL code generation, VHDL simulation, Synthesis, and Device Implementation & Constraints, System Integration and Test.
•Design Low/Med Complexity Circuit Card Assemblies (CCA) starting from System De-composition and completing through System Integration and Test.
•Develop and edit circuit schematics with OrCad/Altium development tools and perform circuit simulation with PSPICE software.
•Edit and develop C/C++ source code for embedded software.
•Perform CCA Design specifying Mixed Signal Technology circuits consisting of A/D, D/A, Processors, I/O communication and Programmable Logic (FPGA, CPLD) circuits.
•Provide system test and evaluation support including input to test plans and procedures.
•Investigate the root cause of component failures. Generate related documentation including technical status, forecast technical needs, and make recommendations for appropriate improvements.
•Review and mitigate component obsolescence.
•Implement the procedures necessary to evaluate the design activities and to ensure conformance with customer requirements, company standards, and sound engineering practices including quality systems procedures.


Qualifications: (refer to Career Framework)
•BSEE, Computer Engineering or another related technical field of study. In special circumstances, the knowledge gained through engineering related work experience may be substituted for educational requirements.
•6+ years of relevant experience.
•Knowledge of High Complexity Digital Design Techniques and Devices.
•Hardware debugging skills & experience in the operation of Signal Generator, Logic Analyzer, Digital Oscilloscope, and Embedded FPGA Debugging tools.
•Valid state driver’s license.
VEVRAA Federal Contractor / Request Priority Protected Veteran Referrals / EOE Protected Veterans/Disability
The Company will consider qualified applicants with arrest and conviction records.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit http://www.tadpgs.com/candidate-privacy/
 
Job Number: 17085
Job Location: Ashway, RI
Rate: $30.00
Per Diem: NO
Overtime: YES
Duration: Temp to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Maria Gomez
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers

Description:
STS Technical Services is hiring Electrical Engineers in Exeter, New Hampshire.

Job Duties:
Member of new product development team
Able to work on prototypes with minimal input from the customer
Able to communicate with customers and sales people in person, on phone and by email to understand their needs, issues, concerns to provide the best product for them
Consistently initiates complex, research, design or development activities with a high degree of independence
Qualifications:
AS/BS in Electrical Engineering or Electrical Engineering Technology.
5-10 years’ of experience in Electronic Systems, Electronics Troubleshooting, Electronic Testing Design, Project Management, Quality Focus, Database Design, Analyzing Information, Reporting Research Results, and Innovation
Familiarity with temperature controllers and power controllers a plus
Able to generate and understand basic schematics
Familiar with designing and testing fuses
Experience with and/or interested in heat transfer and material science
Familiar with single and 3 phase power and basic control schemes
Benefits:

Since this is a direct hire job, our client will provide a full benefits package to you. If you would like to learn more about that package, please call 1-800-359-4787.

Thanks for taking the time, and we look forward to hearing from you soon.
 
Job Number: 33080
Job Location: Exeter, NH
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Engineers

Description:
STS Technical Services is hiring Electrical Engineers in Milwaukee, Wisconsin.

Essential Duties and Responsibilities:
Develop and implement EE wireless system architecture (Bluetooth, WiFi, Cellular) in support of infotainment and vehicle features
Explore technical solutions and present design recommendations to achieve requirements
Develop electrical system & component requirements through collaboration, product benchmarking and input from internal stakeholders
Verify system performance to H-D standards, approve supplier validation, and work with test and verification entities to ensure electrical system meets or exceeds targets
Manage development and risk through FMEA and DVP&R
Partner with internal and external stakeholders to develop software development timeline
Develop software verification plans to ensure features are intuitive and robust at product launch
Support project technical lead and staff engineers in execution of strategy
Qualifications:
Requires a Bachelor of Science Degree in Mechanical Engineering, Electrical Engineering or a related technical field
Typically requires a minimum of 3 years of related experience.
FMEA and DVP&R understanding/experience
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries. Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 34542
Job Location: Milwaukee, WI
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

Electrical Engineers

Description:
Vehicle systems integration
 
Job Location: OH/MI/IN
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Harness Installation Design Engineer-Completions

Description:
1) Electrical Harness Installation (EHI) design experience required.
2) Catia V5 experience required.
3) Mentor Graphics Capitol Logic and Harness XC familiarity / experience preferred.
4) 14 CFR 25 Subpart H - EWIS based design experience required. 5) Completions electrical system design experience preferred. 6) Part 25 Certification experience for cabin interiors preferred.
7) Familiarity with aircraft cabin satellite communication (Inmarsat and Iridium), security, and entertainment systems preferred.
8) Experience with power distribution, lighting, switching, and harness routing required.
9) Familiarity in mechanical system design; to include pneumatic supply, oxygen, water & drain, HVAC and pressure control is preferred.
10) Familiarity with aircraft STC procedures preferred. 11) Bachelor's degree in Electrical Engineering or technical related curriculum applicable to the respective job position required.


Education and Experience Requirements:
Bachelor's Degree in engineering or technical related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Ten (10) yrs in specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.
 
Job Number: 149203
Job Location: Savannah, GA
Rate: $58/hr to $63/hr
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Integration Engineer

Description:
POSITION SUMMARY:
The EWIS Engineer, Senior will support in a blended role, drafting wire routings throughout VIP aircraft. Specific knowledge with EWIS standard design and the ability to read electrical drawings while responsible for 3D engineering drawings related to electrical systems and components in support of VIP aircraft completions.

EXAMPLES OF ESSENTIAL JOB FUNCTIONS:
1. Provide engineering design and analysis of electrical systems and components.
2. Prepare electrical system reports, Engineering Authorizations (EAs), drawings, analysis, and test plans.
3. Develop electrical system modifications and installation work instructions, procedures and recommendations.
4. Work experience with EWIS standard design and wire separation requirements.
5. Develop cabin electrical modification/installation work instructions, procedures and recommendations.
6. Work within engineering team to delegate and assign sections of design elements to appropriate team members.
7. Provide analysis and reports to substantiate that designs meet applicable criteria outlined in CFRs both foreign and domestic.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements corrective action to ensure the timely release.
9. Provides intermediate level technical support and engineering disposition to resolve aircraft engineering/electrical systems problems.
10. Using company procedures, applies intermediate level engineering knowledge to resolve moderate to complex issues.
11. Develops and implements engineering modifications and retrofits to completions in progress.
12. Maintains intermediate level awareness of both foreign and domestic regulations and required compliance including FARs, ADs, and SBs.
13. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
14. Performs other duties as assigned.

MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in engineering, with experience directly supporting knowledge of EWIS regulations.
2. 8 – 10 years experience in Aviation Electrical Systems Engineering or equivalent.

REQUIRED SKILLS AND ABILITIES:
1. Proficient with SolidWorks.
2. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
3. Knowledge of MS Databases (SQL or Microsoft Access) preferred.
4. Aviation background and experience with electrical systems.
5. Knowledge of Federal Aviation Regulations (CFRs) governing aircraft certification preferred.
6. Strong knowledge of industry electrical systems and documentation standards.
7. Experience with electrical systems and components.
8. Requires working knowledge of applicable regulatory agency requirements and ability to discern how a design may be influenced by them.
9. Requires reasoning/analytical skills to creatively design and problem solve.
10. Strong communication and problem-solving skills.
11. Strong time-management and organizational skills.




The Structures Company is an AA/EOE.
 
Job Number: 347
Job Location: IN
Rate: $57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Module Designer

Description:
Electrical Module Designer

Job ID # 2020-11087

Contract Opportunity

Location: Bloomington, MN

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 years



What You’ll Do:
•Substantial contribution to electrical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. timing, power, etc.), design, integration and verification of electrical components, equipment and systems
•Plan and lead electrical engineering root cause analysis for electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues
•Contribute to the generation and maintenance of electrical work products (i.e. plans, specifications, design documentation, etc.) used for internal consumption and/or deliverable to external customers
•Develop and present electrical requirements, concepts, designs, decisions and results to internal management and external customers
•May contribute to technical subcontract management that may include technical oversight and subcontractor work product evaluation
•Substantial contribution to electrical reviews of electrical components, equipment and systems
•Evaluate vendor capability to support product development
•Participation in the improvement of the electrical organizational processes
•Support the generation of engineering products by using the appropriate standards, processes, procedures, and tools throughout the electrical development life cycle
•Contribute to the research and analysis of data, such as customer design proposal specifications, and manuals to determine feasibility of design or application
•Select components and equipment based on analysis of requirements
•May provide leadership and/or direction to lower level employees
•Independently determines approach to solutions
•Plan and execute project tasks for activities described above
•Generally works with multiple work groups, including with senior levels of l work groups
•Generally works on diverse range of complex problems under limited direction
•Generally has regular Contact with project leaders and Program Managers.
•Generally has Some contact with external customers

What You’ll Need:
•Proficient use and understanding of electrical engineering concepts, principles, and theories
•Proficient in the principles and techniques of Electrical Engineering
•Proficient understanding of electrical engineering processes
•Proficient knowledge of other related disciplines
•Keeps abreast of technology trends
•Aware of business objective and Engineering role in achieving
•Proficient in Microsoft Office applications
•Proficient in electrical engineering design tools
•Proficient written and verbal communications skills
•Ability to think creatively
•Ability to multi-task
•Skilled in communicating issues, impacts, and corrective actions
•Ability to recognize and clearly report information relevant to sound electrical engineering design
•Able to sell concepts and ideas
•Travel may be required
•Security clearance may be required
•Understands and applies basic project management principles including IMS, earned value and score cards
•Ability to work well in a team environment
•Preferred:◦Mentor Graphics DxDesigner and Xpedition V2.3 or higher
◦Hyperlynx SI/PI/DRC
◦Experience with designing with DDR3 memory, FPGAs, PCIe, 10G Ethernet, X86 processors




*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree in electrical engineering, or related specialized area, combined with 5+ years of relevant experience; or Master’s degree combined with 3+ years of relevant experience; or equivalent experience and education.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-11087
Job Location: Bloomington, MN
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Module Designer

Description:
An Electrical Module Designer job in Bloomington, MN is currently available through Belcan. In this role, you will be responsible for contributing to electrical requirements analysis, requirements definition, requirements management, functional analysis, performance analysis (e.g. timing, power, etc.), design, integration and verification of electrical components, equipment and systems. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering, or a related specialized area or field, plus a minimum of 5 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required.

Electrical Module Designer Job duties:

* Plans and leads electrical engineering root cause analysis for electrical issues, conducts experimental tests, evaluates results to formulate and implement solutions to issues.
* Contributes to the generation and maintenance of electrical work products (i.e. plans, specifications, design documentation, etc.) used for internal consumption and/or deliverable to external customers.
* Develops and presents electrical requirements, concepts, designs, decisions and results to internal management and external customers.
* May contribute to technical subcontract management that may include technical oversight and subcontractor work product evaluation.
* Evaluates vendor capability to support product development.

Qualifications:

* Experience with designing with DDR3 memory, FPGAs, PCIe, 10G Ethernet, X86 processors.
* Proficient use and understanding of electrical engineering concepts, principles, and theories.
* Proficient in electrical engineering design tools.
* Ability to recognize and clearly report information relevant to sound electrical engineering design.

If you are interested in this Electrical Module Designer job in Bloomington, MN, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 300115
Job Location: Bloomington, MN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: BarrySparks
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems Engineer

Description:
General Summary:
The Electrical Systems Engineer provides expertise in support of electrical systems through all phases of a project, including preliminary design, detailed design, development, certification, sustaining, production and product support.

Duties and Responsibilities:
• Design, development and certification support of the aircraft Electrical Power System, including power generation, distribution and energy storage
• Perform trade studies to determine optimal engineering solution
• Development and validation of requirements
• Design, plan and support of integration tests for laboratory and aircraft testing
• Provide technical support for troubleshooting, root cause analysis and corrective action
• Support of production, in-service and flight test activities
• Preparation and presentation of technical data in design reviews
• Preparation and presentation of change requests
• Review and approval of Qualification Test Plans, Procedures and Reports
• Provide support as required in the maintenance and update of the Electrical Test Laboratory
• Provide support as required in other areas of the Electrical Systems group, including cockpit controls and exterior/interior lighting
Qualifications

Education, Work Experience, Certification and/or Licensure:
• BS in Electrical Engineering from an accredited four year college or university program
• 8 years directly related experience involving design, development and certification of aircraft electrical power systems

Knowledge, Skills and Abilities:
• Knowledge of FAR Part 23 or 25 regulations
• Knowledge of advanced electrical power distribution systems preferred
• Knowledge of aircraft communication busses
• Knowledge of RTCA/DO-160, RTCA/DO-178B and RTCA/DO-254 processes
• Knowledge of aircraft wiring practices
Knowledge of aircraft bonding and grounding practices
Knowledge of system modeling tools preferred

The Structures Company is an AA/EOE.
 
Job Number: 372
Job Location: CA
Rate: $65+/Hr. **DOE**
Per Diem: Yes
Duration: 6 Month Contract to Hire
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems ODA EAR

Description:
Works on engineering projects containing critical problems, the solution of which requires major technological advances and extensive related development

Unique Skills:
• Part 25 Certification Experience for Cabin Interiors preferred
• Five years of experience in executive cabin interior electrical systems design and certification required.
• Current or past experience as an FAA Electrical Systems DER / ODA unit member required.
• Current or past experience as an FAA EWIS DER / ODA unit member preferred.
• Specific experience with cabin management systems, cabin entertainment systems, cabin business (communications and data) systems, and EWIS preferred.
• Document creation experience preferred.
• AutoCAD / Catia V5 experience preferred

Education:
• Bachelor's Degree in engineering or related curriculum applicable to the respective job position required or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
• Thirteen (13) yrs specific technical discipline or fifteen (15) yrs broad eng experience in several technical disciplines with Bachelors.
• Experience credit considered for related adv degrees limited to 2 yrs for Masters and 4 yrs for PhD in fields applicable to this job.

Essential Functions:
• Responsible for an entire engineering project of major complexity within established scope
• Makes technical decisions and recommendations that are recognized as authoritative and have an important impact on extensive engineering activities 3. Applies advanced technical principles, theories and concepts based on broad expertise or unique specialized knowledge
• Leads the development of innovative principles and ideas
• Acts independently to determine improved methods and/or procedures to optimize technical product, cost and schedule requirements
• Works under consultative direction; uses independent judgment to accomplish objectives 7. Develops standards and guides for diverse engineering activities
• Conceives and plans investigation of broad areas of importance for which engineering precedents are lacking in areas critical to the program Perform other duties as assigned.
 
Job Number: 24-405
Job Location: Savannah, GA
Rate: $135/hr
Per Diem: Yes
Overtime: Yes
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Systems ODA EAR

Description:
Unique Skills:
1) AutoCad / Catia V5 experience preferred
2) Part 25 Certification Experience for Cabin Interiors preferred
3) Five years of experience in executive cabin interior electrical systems design and certification required.
4) Current or past experience as an FAA Electrical Systems DER / ODA unit member required.
5) Current or past experience as an FAA EWIS DER / ODA unit member preferred.
6) Specific experience with cabin management systems, cabin entertainment systems, cabin business (communications and data) systems, and EWIS preferred.
7) Document creation experience preferred.


Education and Experience Requirements:
Bachelor's Degree in engineering or a related curriculum required or equivalent combination of appropriate education/experience sufficient to successfully perform the essential functions of the job. Advanced degree in engineering, or related curriculum preferred.15+ years specific technical discipline with Bachelors. Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs PhD in fields applicable to job.


Position Purpose:
Applies specialized engineering knowledge to broad and complex engineering problems; Works on engineering projects containing significant and uniquely challenging problems requiring highly innovative solutions.

Principle Duties and Responsibilities:
Essential Functions: 1. Responsible for an engineering project; successful completion requires the use of innovative technical advances, methods and processes 2. Applies solutions that are highly innovative and sets new precedence for engineering function and industry 3. Introduces and champions new technologies for Gulfstream aircraft and company processes 4. Actively promotes R&D initiatives that will meet or further Gulfstream objectives 5. Acts independently to conduct technical research, develop new methods and/or procedures to complete complex assignments 6. Is consulted extensively by associates and others with a high degree of reliance placed on the incumbent scientific interpretations and advice. Perform other duties as assigned.

Other Requirements: 1. Assignment requires approval of Engineering Promo Review Board including business justification.
 
Job Number: 152401
Job Location: Savannah, GA
Rate: $90/hr-$135/hr
Per Diem: Yes
Overtime: Yes
Duration: Long Term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required
 
Job Number: 12256
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electrical Wire Harness Engineer

Description:
*This is a full time, 1 year contract position located in York, PA*

*Alternate locations available to work from, Minneapolis or San Jose*

*Per diem split is available for out of the area applicants*



We are seeking a contract Electrical Engineer specializing in vehicle electronics and wire harness designing. We are working on optimizing the design the wiring harnesses and cable assemblies which will integrated into military ground vehicles, such as tanks and armored personnel carriers.



Daily duties will consist of specifying/design of components from requirements and work on through modeling, simulation and analysis or test that requirements are met. Will work on creating engineering documentation (specs, ICDs, design documents, and technical/test reports) and complete technical data packages. Handle cost estimating, scheduling assigned electrical design projects; work on ECOs and change proposals as well as monitoring to ensure manufacturing, and delivery of components schedules are met. Applicant will assist drafters / designers in creating clear and releasable documents.



Required:
*3 years’ experience designing electrical & wire harnesses systems for military vehicles.
*Working knowledge of Visio Technical, Pro-E, Pro-Cable and/or CADDS 5
*Understanding of military electrical connectors and cabling specs such as SAEJ1939 CANBus/CANalyzer.

*Familiar with C4ISR equipment and vision enhancement systems including cameras and displays.

*Working knowledge of vehicle positioning systems.

*Experience using electrical test equipment including oscilloscopes, meters, power supplies.
*Knowledge of MIL-STD 1553,MIL-STD 100

*4 year degree in Engineering





Pluses:
*Experience integrating military communication/antenna systems including BFT, SINCGARS, DAGR, CREW2
 
Job Number: 314
Job Location: Sterling Hts, MI
Rate: DOE
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Electrician

Description:
PDS Tech is seeking an Electrician in Salt Lake City, UT

Duties:
Maintain and repair equipment in Titanium sponge plant.
Work safely and obey safety standards, participate in safety observation program.
Follow daily maintenance schedule.
Plan out electrical jobs and get information on parts.
Perform preventative maintenance on plant equipment and instrumentation. 
Troubleshoot Electrical equipment, PLC’s, valves and solenoids and other equipment as needed.
Install new electrical equipment as needed.
Assist maintenance mechanic with maintenance task and life critical permits.
Possible On call during evening hours for emergency repairs.
 


Requires a high school diploma or its equivalent with 2-4 years of experience in the field or in a related area. May have to complete an apprenticeship and/or formal training in area of specialty. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. 
 
Job Number: 2010111324
Job Location: Salt Lake City, UT
Duration: 3 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fhRVQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electro/Mechanical Design Engineer

Description:
-Designer will use Computer Aided Design (CAD) systems to prepare mechanical design layouts, detail and assembly drawings and models (including but not limited to packaging, mechanisms, and castings)
-Electrical/mechanical packaging, harnessing, structures, cabling, surfacing and mechanisms
-Technical knowledge sufficient to perform complex tasks such as preparation of all types of detail drawings, large assemblies, castings or other performs, interface drawings, various layouts for design
-Advanced experience of CREO Parametric (Pro/Engineer) solid modeling CAD tool and considerable knowledge of Windchill data management (PDM) tool . GD&T
 
Job Number: 0878
Job Location: Multiple
Rate: 50-80/hr
Per Diem: YES
Overtime: Possible
Duration: 6-12 months plus
Start Date: 2/3 wks
Input Date: 11/14/2020
Firm Name: ADVANCED TECHNOLOGY
Attention: Domenic
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Website: www.advancedtechno.com

Electronic Test Technician

Description:
PDS Tech is currently recruiting for Electronic Test Technicians as well as various other positions in Hollister, CA.  

The Technician conducts complex destructive and non-destructive testing in accordance with written procedures such as Acceptance Test Procedures (ATPs) or Qualification Test Procedures (QTPs).   This position also requires the ability to interpret dimensional drawings and perform test setups. 

  • Responsible for design verification and acceptance testing of pyrotechnic and electronic products.
  • Must be familiar with test equipment (ie: oscilloscopes, multimeters, environmental chambers).
  • Reviews system-level Acceptance Test Procedures for a wide variety of pyrotechnic and electrical devices.
  • Troubleshooting, calibration and adjustments to test equipment, components and systems.
  • Correct malfunctions by making adjustments or replacing parts or components
  • Use small hand and power tools along with various measuring and testing devices.
  • Perform appropriate duties associated with specialized IT project-based activities.
  • Participate in process improvement meetings and team 5S activities.

  • 3+ years’ experience as a Test Technician preferably in an Aerospace and/or Defense environment preferred
  • Test experience involving vibration, shock and pressure vs. time
  • Working knowledge in interpreting dimensional drawings and test procedures 
  • Capable of lifting 40 pounds
  • High School/GED Required
  • Must be able to work overtime

 
Job Number: 1910106748
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fJj4QAE&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 

In your role, you will:
  • Assemble fabricated aircraft parts at floor stations.
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

For more information please call Michael at (813) 426-9917 or email mcoonce@pdstech.com 
Qualifications:
  • Fine pitch soldering experience is required. (watch maker certifications)
  • 4 years experience in electronics assembly.
  • High School Diploma required.
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Point of Contact:  Michael Coonce at (813) 426-9917 or email mcoonce@pdstech.com 
 
 
Job Number: 1810083538
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i50000002mJYHAA2&URLSource=cjhunter

Electronics Technician

Description:
PDS Tech is seeking Electronics Technicians / Assemblers for frequent openings in Clearwater, FL. 


In your role, you will:
  • Assemble electrical or electronic systems and support structures.
  • Install components, units, subassemblies, wiring and assembly casings using rivets, bolts, soldering and micro-welding equipment.
  • Hand solder components under a microscope.  Fine pitch soldering experience is required.
  • Use hand tools and work instructions to assemble units according to product specifications.
  • Use engineering diagrams/Mil-Standard specs (IPC) and schematics in a production environment.

Qualifications:
  • Fine pitch soldering experience is required is a plus 
  • 5 years experience in electronics assembly preferred.
  • Must have a High School Diploma or GED
  • Associates degree in Electronics or Engineering Technology desired.

Desired Certifications:

  • IPC J-STD-001:  Soldered Electrical and Electronic Assemblies
  • IPC-7711/7721: Rework and Repair of Electronic Assemblies
  • IPC/WHMA-A-620:  Cable and Wire Harness Assemblies

Opportunity for contract-to-hire based on employee performance, attendance, dependability and Client’s business needs. ​

Please call Clyde at 813-426-9917 or email ccallwood@pdstech.com for more information

 
 
Job Number: 1610047076
Job Location: Clearwater, FL
Per Diem: No
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Clyde Callwood
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i500000026C5mAAE&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Electronics Technician MD

Description:
167627 Job Title: Electronics Technician

Work Site Address: Baltimore, MD 21220
Job Number: 3304-1
Max Pay Rate: $35.00/hr
Start Date: 2/25/2020
End Date: 7/3/2020
Position Type: Contract

Job Summary:
Consist of engineering hardware fabrication support, troubleshooting, testing and basic Laboratory operations responsibility.

Some climbing on ladders may be required as well as lifting up to 25lbs. These responsibilities will include fabrication of electronic/electrical chassis' and mechanical rack fabrication using development engineering drawings. Candidate must be capable of working independently, discussing technical issues with customers and working with vendors.

Qualifications and Education Requirements
AA in Electrical or Electronics Engineering is highly preferred.

Skills: Category Name Required Importance Experience
Technical Skills IPC-J-STD Yes 1 2 - 4 Years
Technical Skills IPC-A-610 No 3
Technical Skills IPC-WHMA-A-620 No 2

Qty 1 position
 
Job Number: LMRMS-3304-1ATO
Job Location: Baltimore, MD
Rate: 35/hr max
Duration: 5 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Embedded S/W Engineer - Clearance GA

Description:
2884-1 Embedded S/W Engineer
Work Location: Marietta, GA
Status: Open

Qty: 1
Desired Start Date: 1/29/2020
End Date: 1/19/2021

Job Description:
Designs, develops, operates, and maintains software and firmware components and computing systems software to be applied to and integrated with engineering, scientific, and manufacturing requirements. Applies the appropriate standards, processes, procedures, and tools throughout the system development life cycle to support the generation of such engineering applications and produces such as laboratory simulations systems, airplane flight control and display systems, avionics mechanical and electrical systems, weapons armament, commercial and military aircraft systems, mobile and ground-based defense systems, space systems, and other systems and applications of this nature. interfaces with customers, suppliers, application users, and other technical and support personnel. Selected candidate may operate and maintain existing laboratory venues. This position has potential to be extended for 36 months.

Required
- Experience in the use of Windows and Unix Operating Systems.
- 4+ years experience of software development in high order languages (C++, Java and/or Ada).
- Experience with software development tools and processes
- Experience (2 years or more) with at least one Infrared sensor or knowledge of the IR environment

Level: Level 3: BS+6-10 YRS or MS+4-8 YRS
Pay Rate: $72.00 Hourly
 
Job Number: JE-2884-1S6
Job Location: Marietta, GA
Rate: 72/hr max
Per Diem: pd split possible
Duration: 1 year plus extension
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Exhaust Processor- Exhaust- Job ID 40534

Description:
We have an Excellent Contract position for an Exhaust Processor to join a leading Company located in the Tempe, AZ area.

**U.S. Citizenship Required.
**Candidate must have the ability to obtain and maintain a Confidential Security Clearance.**

Please click on this link if you have any questions on how to obtain a clearance https://news.clearancejobs.com/2016/06/12/obtain-security-clearance/

Job Responsibilities:
The main function is to vacuum process and assemble components for the manufacture of bare image intensifier tubes for use in night vision products.
The Exhaust Processor receives the preassembled tube and loads it into the exhaust station. They then process and activate the tube and cathode under an ultra-high vacuum. The tube is then sealed and unloaded. All process data is recorded in the quality tracking system (QTS), then the tube and the accompanying paperwork are delivered to Initial Test (I-Test).
Follow written procedures and complete assigned work in a timely manner to keep production schedule while maintaining acceptable yields as determined by area supervisors and engineers.

Basic Hiring Criteria:
High School Diploma or equivalent.
Minimum 1 year of verifiable exhaust/vacuum experience within the Exhaust Processor Job Family or having a minimum of two years’ experience within the high-tech manufacturing environment with like experience and equivalent knowledge.

Desired Qualifications:
General knowledge of ultra-high vacuum technology (OJT provided).
Basic computer knowledge for data entry and email communication OJT forms and visual aids.
Basic electrical knowledge, Lock-out/Tag-out and industrial safety (OJT provided).
Use of hand tools, including but not limited to, power drivers and torque wrenches.
Use of Digital Multi-Meters (DMM), high voltage probes and general electronic equipment.
 
Job Number: 40534
Job Location: Tempe, AZ
Rate: $16.00
Per Diem: NO
Overtime: YES
Duration: 12 Month+
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: TAD PGS INC
Attention: Terry Bentley
Address: 12062 VALLEY VIEW ST STE 108
City, State: GARDEN GROVE, CA 92845
Phone: 657/250-1893
800 Phone: 800/261-3779
Website: www.tadpgs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA Engineer

Description:
An FPGA Engineer job in Fairfax, VA is currently available through Belcan. In this role, you will be responsible for supporting designing and developing firmware for the Digital Receiver Exciter and Digital Beamformer for the Air and Missile Defense Radar (AMDR) Program. To be considered for this role, you will have a Bachelor's degree in Electrical or Computer Engineer, a related specialized area or field, plus a minimum of 5 years of relevant experience. A current active department of defense Secret security clearance is required at the time of hire.

FPGA Engineer Job duties:

* Participate in all aspects of the development lifecycle including design, development, integration and test.
* Develop complex FPGA-based solutions from concept, though design, synthesis, timing analysis, UVM base verification, lab integration, formal test, and production support through product life cycle.
* Determines architecture, system simulation and detailed design approach.
* Creates test and simulation plans that establish functional criteria.

Qualifications:

* Experience with high-speed digital electronics, proper timing and debugging capabilities.
* An understanding of Digital Signal Processing (DSP) techniques and layout of high-speed digital boards.
* An understanding of Digital Signal Processing (DSP) techniques and layout of high-speed digital boards.
* Recent experience with Xilinx Virtex 6&7 with Xilinx support tool ISE and Vivado tool.
* Very High Speed Integrated Circuit Hardware Description Language (VHDL) experience and associated modeling and simulation tools.

If you are interested in this FPGA Engineer job in Fairfax, VA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298353
Job Location: Fairfax, VA
Rate: --
Per Diem: --
Overtime: --
Duration: JOB-CONTRACT_TYPE
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
FPGA/VHDL Electrical Engineer

Description:
*This is a full time, 6 month contract position, located in Wayne, NJ*



We are searching for an FPGA design/verification/test engineer. Candidate will develop requirements, specifications and documentation. Create verification plans using Universal Verification Methodology (UVM), develop RTLs, System Verilog, Test Like You Fly, etc. Candidate will perform design analysis and verifications, Insert ASIC test capabilities, and support ASIC testing.



Required
*5 years’ experience in FPGA electronics designing (PCB Boards).
*Strong HDL skills such as VHDL, Verilog
*Exposure to two or more of the following: RTL definition, verification and design, test insertions, synthesis, Static Timing Analysis, Test Pattern generation.
*Verification methodology experience with tools such as UVM/OVM.
*4 year engineering degree, preferably a BSEE



Pluses:
*Verification methodology experience with tools such as UVM/OVM.
*Experience with Mentor Graphics Modelsim / Questasim or Synopsys backend tools
•Able to program in C, C++, TCL, or scripting in PERL, Bash, Python, Ruby
•Linux experience
 
Job Number: 251
Job Location: Wayne, NJ
Rate: $83.90
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Facilities Engineer II

Description:
*This is a full time, 9 month, contract position located in York, PA*



We are seeking a Facilities Engineer who can plan, design and coordinates facility renovations, layouts, equipment updates and utility support; may include modernization, maintenance and upgrading of plant electrical and mechanical systems, structures, architecture and interior finishes; ensures facilities compliance with OSHA, EPA, applicable codes (NEC, IBC, ADA) and local, state and federal codes and regulations.



The position requires working with managers and engineers and determining what the customer needs are (scope of the projects), creating a budget, estimating costs, bidding out the work, and completing the project ensuring project guidelines and building codes have been met.



Required:

* 2 years Facility Engineering experience

*Strong MS Office experience

*Good CAD software, preferably, using AutoCad
*This position requires daily interaction with union employees.

*4 year degree



Pluses:

*2 yrs AutoCAD 2017

*Industrial engineering degree

*Experience in negotiating with union employees.
 
Job Number: 094
Job Location: York, PA
Rate: $40.25
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Field Service Specialist

Description:
PDS Tech, Inc. is seeking a Field Service Specialist  in Metairie, LA.

Summary:

  • These positions will be performing installation work in the field to support the Entergy Project to include the installation of electric meters and minimally assisting in warehouse operations.
  • The role of a FSTs primarily includes working outside in the Metairie area in hot and cold weather, capable of operating data collection tools from handheld tablet computers, be able to work quickly and accurately and most-importantly be able to professionally interact with local utility customers.

Requirements:



* Strong technical, written, and oral communication skills and ability to work independently 



* Ability to analyze and solve problems 



* Ability to work in all types of outdoor environments 



* Ability to operate a company vehicle and comply with company safe driving practices. 



*A familiarity with basic computer skills 



* Hold a clean driving record/Valid Driver's License. 



* Adhere to all Federal, State and Local driving requirements, company policies and procedures as well as additional legal regulatory requirements

Previous electrical experience preferred.

 
Job Number: 1910104858
Job Location: Metairie, LA
Duration: 18 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Rachelle Caramagno
Address: P O BOX 619820
City, State: DALLAS, TX 75261-9820
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9636
Email: cecjnrt@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GUzxQAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Control Law Team Leader

Description:
We are seeking a seasoned Flight Control Engineering with successful leadership experience to fill a lead role for an aerospace company located in Nagoya, Japan. Interested candidates should have over 10 years of flight control/dynamics experience as well as senior aerospace program leadership skills.

Responsibilities of the Flight Control Law Team Leader

Manage the team with specialized technical background and knowledge regarding Control Laws Design, Verification and Certification.
Planning, managing and controlling of Control Law design related activities, Desktop Simulations related activities, Manned Simulations related activities, Flight Test related activities, Validation and Verification related activities, including interaction with the pilot community.
Support to integration activities with other areas of the organization including Flight Control Systems, Aeroelastics and Loads.
Preparation of documentation to support Certification and if requested, coordination with authorities (JCAB, EASA, FAA).
Support to Auto-Land and Auto-Pilot Systems and/or activities related to other derivative aircrafts.

Requirements of the Flight Control Law Team Leader

15 plus years of aircraft Flight Control and Flight Dynamics experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Miguel Calderon
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Operations / URGENT - Clearance MD

Description:
Flight Operations
Work Location: Patuxent River, MD - RMS
Status: Open

Qty: 5
Desired Start Date: 12/9/2019
End Date: 2/26/2021

Job Description:
The Flight Test Engineer’s primary role will be to support flight testing at Patuxent River Naval Air Station on the F-35B and F-35C aircraft. The primary task for this position includes mission planning for all PAX F-35 test flights and maintaining the configuration of the mission planning equipment.

-The Mission Systems team is responsible for the following aircraft systems: RADAR, EOTS/DAS, EW/CM, CNI, displays, and also the off-board mission planning equipment. Familiar with Mission Systems/Avionics aircraft architectures or experience with flight test.

-The U&S team is responsible for the following aircraft systems: Electrical Power, Fuel, Fire Protection, Hydraulics, Landing/Arresting Gear, and Power/Thermal Management. Familiar with aircraft U&S architectures or experience with flight test.

-The FLCS team is responsible for the following aircraft systems: Air Data, Inceptor Control, Control Surface Actuation, Navigation, and Vehicle Management Systems. Familiar with Flight Control Systems equipment or experience with flight test.

-Additional tasks may include planning and executing Mission Systems test flights, supporting test flight briefings/debriefings, providing real time control room monitoring of MS test flights, requesting/analyzing post-flight data, and supporting MS anomaly resolution as well as on-aircraft troubleshooting of MS hardware.

Basic Qualifications
-Bachelor’s degree from an accredited college in Mechanical or Electrical Engineering or related engineering degree.

Desired skills
-Familiar with F-35 Mission Systems aircraft architecture or experience with F-35 flight test.

-Computer programming experience.
-MATLAB experience.
-Proficiency with Microsoft Office suite (Word, Powerpoint,
Excel, Outlook) and Microsoft Windows operating system.
-Works well within a team and possesses good written and verbal communication skills.

CNE Work Location: Fort Worth, TX
Level: Level 2: BS+4-8 YRS or MS+2-6 YRS
Pay Rate: $74.00 Hourly
 
Job Number: LMRMS-2699-1S
Job Location: Patuxent River, MD
Rate: 74/hr max
Per Diem: pd split possible
Duration: 15 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
We are currently seeking experienced Flight Test Engineers to fill an opening for a company in Moses Lake, WA. The ideal candidate for this position should have 5 plus years relevant work experience related to experimental flight test operations and familiarity with FAA Part 25 or Part 23 certification.

Responsibilities of the Flight Test Engineer
Supporting engineering teams with test plan creation.
Discussing, writing and reviewing test cards and test hazard analysis.
Supporting and leading test preparation activities, test execution and post-test activities.
Supporting and leading pre and post flight briefings.
Monitor live flight data, either via telemetry or onboard flight test aircraft.
Process, analyze and draw conclusions from post flight data.
Make assessments to ensure safety of flight determination.
Document flight test design problems for long term fix.
Generate and review appropriate restrictions/ limitations documentation.
Update monitoring screens for specific testing and/or restriction monitoring.


Requirements


5+ years relevant work experience related to experimental flight test operations.
Experience in Test Pilot School is a strong plus.
Experience with FAA Part 25 or Part 23 certification, flight and ground test planning and test conduct, and test data analysis.
Strong ability to analyze results.
Communicate clearly and effectively verbally and in writing (summaries, documents, reports, presentations).
Proficient in working with Microsoft Office applications including Word, Excel, and PowerPoint. Ability to quickly learn to operate new software.
Bachelor's degree or equivalent combination of work experience. Focus in Electrical, Mechanical or Aerospace Engineering, Mathematics, Physics or related.
 
Job Location: Moses Lake, WA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bonry
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Flight Test Engineer

Description:
Unique Skills:
Experience developing flight test plans for fixed wing onboard execution on an experimental aircraft in the areas of performance, aerodynamics, powerplant, mechanical systems, or electronic systems
Experience executing test procedures onboard experimental fixed wing test aircraft
Experience performing analysis of post flight data to determine pass/fail

Education and Experience Requirements:
Bachelor's Degree in technical related curriculum applicable to the respective job position or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
5 years Flight Test engineering experience or 10 yrs broad eng experience in several technical disciplines.
Experience credit considered for related adv degrees limited to 2 yrs for Masters, 4 yrs for PhD in fields applicable to this job.
Flight Test Engineer Certification may offset one year of experience requirement.


Position Purpose:
Assists with the planning, coordination, test execution, and liaison to engineering supporting the development and production of Gulfstream products and services.

Principle Duties and Responsibilities:
Essential Functions:
1. Perform core roles and responsibilities with some oversight and direction applicable to the complexity of the testing
2. Support testing to including stability & control, flying qualities/characteristics, stall demonstration, performance, powerplant, mechanical systems, pneumatic systems, electrical systems, avionics, cooling/ventilation, icing, and cold/hot weather
3. Work with engineering and test pilots to define test points that are conducted on test aircraft
4. Definition of Instrumentation requirements and communication with instrumentation engineering group to support installation on aircraft to support test requirements
5. Definition of the aircraft configuration to support the on aircraft test
6. Tracks test points and updates pass/fail/repeat status
7. Supports on aircraft ground/flight testing as required.
8. Provides the judgment on acceptable test data during or post flight
9. Processing of data following a test flight to document test results
10. Development of flight test reports to show compliance with test requirements
11. Detailed test planning including mission plan, creating flight cards, configuration verification, and compiling appropriate restrictions and safety/hazard assessments
12. Prepare material and present for Test Readiness Review (TRR) to gain approval from stakeholders that system under test is ready to being ground/flight testing activities
13. Perform safety analysis and prepare material as required. for Safety Review Boards (SRB) to support test missions
14. Conducts flight test brief with flight ops and engineering
15. Provides the on airplane direction of test sequence and execution, relying on FT Analyst for acceptability of collected data with exceptions where this authority is delegated
16. Generates and transmits post flight test summary
17. Conducts debrief of test mission with test crew and engineering
 
Job Number: 148303
Job Location: Savannah, GA
Rate: $55/hr to $70
Per Diem: No
Overtime: Yes
Duration: Long term Contract
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Ravi Singh
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Hydraulic Design Engineer - Liaison

Description:
A Hydraulic Design Engineer / Liaison job is currently available through Belcan in Oshkosh, WI. This job will work as a Contractor supporting our customer at their facility. To be considered for this position, you must have actual work experience involving Creo and hydraulics or airbrake systems design and a Bachelor's Degree in Mechanical or Electrical Engineering. This job will be responsible for technical work along with liaison and lead duties that involve: coordinating, communicating, delivery, and project management between the customer and Belcan Design Center teams.

Hydraulic Design Engineer / Liaison job duties:
* Work hands on with customers to identify work and deliverables, coordinate and project manage work to and from the Belcan Design Centers, deliver and present results, etc.
* Update and create 3D and 2D models to government standards.
* Make changes to ensure compliance with established design standards and practices.
* Complete change requests, conversions, and make model and assembly changes within proper CAD tools and parts software.
* Resolves client questions or field problems concerning the design package and contract deliverables.
* Conduct different design procedures, such as 2D and 3D modeling, simple modifications of existing production components.

Qualifications:
* Legal authorization to work in the U.S. is required.
* A BSME or related degree involving electrical or mechanical design.
* Three to five years of professional design experience with hydraulics, fittings, airbrakes, fluid power, high-pressure gas suspension systems, etc.
* Experience with design project management and direct customer interaction.
* Experience with Creo or Pro Engineer CAD software.
* Experience with Creo Piping.
* Experience with Windchill is preferred.
* Ability to work in a team environment and take direction, as well as, work independently and be a self-starter.
* Ability to work in a fast-paced environment while multi-tasking and maintaining strong interpersonal and communication skills.

If you are interested in this job in Oshkosh, WI, please apply via the 'apply now' link provided. As an employee with Belcan Engineering, you will be part of one of the largest engineering firms in the United States. We maintain a small-company atmosphere as well as open communication at all levels of our organization, allowing for much more dynamic decision-making processes. We offer flexible schedules as well as an excellent mentoring system to ensure that you have all of the knowledge and tools you need to meet a diverse range of engineering challenges. You will also have opportunities to advance to positions of greater responsibility, including management roles. Your hard work and professional dedication will be rewarded with a competitive compensation package.

Belcan is an equal opportunity employer. EOE/M/F/D/V

Build a challenging and rewarding career with an industry leader!

http://belcan.com/

 
Job Number: 297938
Job Location: Oshkosh, WI
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DavidRiley
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

In process Inspector

Description:
PDS Tech is currently recruiting for an InProcess Inspector in the Hollister, CA area.  This is a direct hire position for 2nd shift. 

This role is for our second shift and the required hours will tentatively be between 4pm-2:30am, with the potential for overtime and pay differential.

Duties:
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Need to have mechanical aptitude with an ability execute good record keeping practices as a major part of the duties.
  • Must be detail-oriented and adept at accuracy.
  • Must be flexible and able to work with a variety of different people and in different areas depending on business need.
  • Interpret drawings and written work instructions.
  • Uses a variety of precision measuring instruments including electrical test equipment including calipers, and micrometer.
  • Schedules, plans, and executes assigned or delegated tasks in an efficient manner.
  • Prioritizes workload such that production delays are minimized or eliminated.
  • Ability to interface directly with customer representatives.
  • Perform other related duties as assigned.
  • Performs limited repetitive dimensional and electrical inspection using basic equipment and established procedures with minimum supervision of a higher inspector or supervisor.
  • Must possess basic mathematical abilities and be computer literate and is comfortable using different applications.
  • Must be able to lift up to 35 lbs.

Must be able to support mandatory overtime as needed
 
Qualifications:

  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
 
Qualifications:
  • Knowledge in the use of basic mechanical measuring tools (including calipers, and micrometer)
  • Ability to interpret basic drawings and instructions
  • Good written, verbal, mathematical and analytical skills
  • High School degree
  • IPC 600, 610 and JStandard certification preferred

 
Job Number: 1910101126
Job Location: Hollister, CA
Duration: 0 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Pam Zack
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
Phone: 214/647-9600
800 Phone: 800/270-4737
Fax Phone: 214/647-9630
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T0000033dq7QAA&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Interior Design Engineer - Solidworks

Description:
POSITION SUMMARY:
Provides all levels of engineering drawings related to interior cabin furnishing and components in support of VIP aircraft completions. Mentors other engineers on department techniques and processes. Must have aircraft interiors completions experience and experience designing monuments, galleys, credenzas, closets, beds, tables, etc.



ESSENTIAL JOB FUNCTIONS:
1. Develops advanced level design data packages for interior cabin furnishing in support of VIP aircraft completions.
2. Utilizes airworthiness requirements and the project specification to create drawings.
3. Creates and reviews engineering drawings, specifications, service bulletins, reports, etc.
4. Performs research and design relating to the production of engineering drawings necessary for installation and completion of custom aircraft interiors.
5. Prepares advanced level interior cabin furnishings reports, Engineering Authorizations (EA’s), drawings, and EO’s.
6. Develops advanced level interior cabin furnishings modifications and installation work instructions, procedures and recommendations.
7. Mentor and train less experienced engineers within department to increase overall efficiency of department.
8. Identifies discrepancies and/or problems with drawings before releasing to production and implements correction action to ensure the timely release.
9. Provides advanced level technical support and engineering disposition in order to resolve aircraft engineering/interior cabin furnishing problems.
10. Using company procedures, applies engineering knowledge to resolve complex issues.
11. Maintains advanced level awareness of FAA regulations and required compliance of FARs, ADs, SBs.
12. Actively works to improve daily processes, and ensures all work meets completion aircraft requirements.
13. Performs other duties as assigned.


MINIMUM QUALIFICATIONS, EDUCATION, EXPERIENCE, LICENSES, ETC:
1. Bachelor’s Degree in Mechanical or Structural Aerospace Engineering or comparable.
2. 2-5 years’ experience in Furnishings, Design or Structural Engineering.
3. Familiarity with the Supplemental Type Certificate (STC) process

REQUIRED SKILLS AND ABILITIES:
1. Proficient with Microsoft Word, Excel, PowerPoint, Outlook, and Internet Explorer.
2. Knowledge of Federal Aviation Regulations (FARs) governing aircraft certification Preferred.
3. Ability to read, write, speak, and understand the English language.
4. Computer Aided Drafting/Design - SolidWorks required
5. Aviation background and electrical systems experience required.
6. Strong knowledge of industry mechanical systems and documentation standards.
7. Experience with electrical systems and components.
8. Strong communication and problem-solving skills.
9. Strong time-management and organizational skills.





The Structures Company is an AA/EOE.
 
Job Number: 339
Job Location: Indianapolis, IN
Rate: $50-57/Hr. **DOE**
Per Diem: Yes
Duration: 12+ Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Junior Electrical Drafter 8387

Description:
TriMech Services is an engineering resource provider specializing in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skillsets of our candidates to the engineering specific industry.



We are seeking a qualified Electrical Drafter for one of our Tennessee offices.


Responsibilities

• Create new and maintain existing electrical drawings for technical equipment including warming cabinets, ovens and refrigeration.
• Work with electrical team creating electrical drawings in AutoCad and SolidWorks. Documentation includes ladder, point to point diagrams as well as 3d drawings and BOM’s.
• Work closely with new product developments as well as maintaining existing drawings to keep unit wiring accurate and up to date. This includes cross-checking others’ drawings before release.
• Interact with other team members to obtain information required to complete projects on time.
• Perform other duties as assigned

Qualifications:

• 2 year technical degree or equivalent work experience
• AUTOCAD or SolidWorks experience drawing electrical diagrams and wire assemblies
• Experienced with good wiring practice, electrical tools, diagnostic equipment and electrical safety
• Detail-oriented with effective communication skills
• Ability to demonstrate good judgment, professionalism and teamwork skills.
• The qualified individual must occasionally lift and/or move 10-25 pounds
• Job requires continuous work at CAD station
 
Job Number: 8387
Job Location: Portland, TN
Per Diem: possible
Overtime: possible
Duration: 6mos w/hire
Start Date: asap
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Alicia Cecil
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Junior Electrical Drafter 8387

Description:
TriMech Services is an engineering resource provider specializing in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skillsets of our candidates to the engineering specific industry.



We are seeking a qualified Electrical Drafter for one of our Tennessee offices.


Responsibilities

• Create new and maintain existing electrical drawings for technical equipment including warming cabinets, ovens and refrigeration.
• Work with electrical team creating electrical drawings in AutoCad and SolidWorks. Documentation includes ladder, point to point diagrams as well as 3d drawings and BOM’s.
• Work closely with new product developments as well as maintaining existing drawings to keep unit wiring accurate and up to date. This includes cross-checking others’ drawings before release.
• Interact with other team members to obtain information required to complete projects on time.
• Perform other duties as assigned

Qualifications:

• 2 year technical degree or equivalent work experience
• AUTOCAD or SolidWorks experience drawing electrical diagrams and wire assemblies
• Experienced with good wiring practice, electrical tools, diagnostic equipment and electrical safety
• Detail-oriented with effective communication skills
• Ability to demonstrate good judgment, professionalism and teamwork skills.
• The qualified individual must occasionally lift and/or move 10-25 pounds
• Job requires continuous work at CAD station
 
Job Number: 8387
Job Location: Portland, TN
Per Diem: possible
Overtime: possible
Duration: 6mos w/hire
Start Date: asap
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Alicia Cecil
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Junior Electrical Drafter 8387

Description:
TriMech Services is an engineering resource provider specializing in the placement of qualified technical candidates for both temporary and direct hire opportunities. TriMech Services offers a unique approach to matching the specialized skillsets of our candidates to the engineering specific industry.



We are seeking a qualified Electrical Drafter for one of our Tennessee offices.


Responsibilities

• Create new and maintain existing electrical drawings for technical equipment including warming cabinets, ovens and refrigeration.
• Work with electrical team creating electrical drawings in AutoCad and SolidWorks. Documentation includes ladder, point to point diagrams as well as 3d drawings and BOM’s.
• Work closely with new product developments as well as maintaining existing drawings to keep unit wiring accurate and up to date. This includes cross-checking others’ drawings before release.
• Interact with other team members to obtain information required to complete projects on time.
• Perform other duties as assigned

Qualifications:

• 2 year technical degree or equivalent work experience
• AUTOCAD or SolidWorks experience drawing electrical diagrams and wire assemblies
• Experienced with good wiring practice, electrical tools, diagnostic equipment and electrical safety
• Detail-oriented with effective communication skills
• Ability to demonstrate good judgment, professionalism and teamwork skills.
• The qualified individual must occasionally lift and/or move 10-25 pounds
• Job requires continuous work at CAD station
 
Job Number: 8387
Job Location: Portland, TN
Per Diem: possible
Overtime: possible
Duration: 6mos w/hire
Start Date: asap
Input Date: 11/14/2020
Firm Name: TRIMECH SERVICES LLC
Attention: Alicia Cecil
Address: 4461 COX RD STE 302
City, State: GLEN ALLEN, VA 23060
Phone: 804/257-9965
Fax Phone: 804/257-7945
Website: www.trimechservices.com

Lab Test Engineer

Description:
PDS Tech is seeking an Lab Test Engineer, in Colorado Springs, CO.

Summary:

  • Manages research, development, design, and testing of electrical components, PC Board Layout, Electronics Packaging equipment, facilities, systems, products and networks for commercial, industrial and governmental purposes.
  • Review schematics and customer requirements for each product to assure accurate tests are being performed for each product.
  • Create detailed testing procedures for fire and gas detection products.
  • Evaluate and understand the Bill of Materials to verify all of the components are considered during testing.
  • Prioritize tasks and testing procedures to meet company and customer goals.
  • Execute validation and regression level tests.
  • Verify functional requirement on new product designs.
  • Create effective testing procedures in order to execute 200+ tests using multitasking techniques.
  • Track progress on program testing to ensure schedule goals.
  • Document product and procedure test results in an organized manner for leadership and co-workers to review.
  • Analyze defective components and product systems.
  • Conduct failure analysis, document the cause(s), and notify the team and supervisor of results.
  • Compile and report any unusual conditions or high risk results that could affect the quality or safety of the product.
  • Follow-up with engineering teams on re-designed product or products that needed technical updates or changes resulting from non-compliant test results.
  • Review, test, and validate agency requirements for each product to ensure compliance to agency standards.
  • Collaborate with the team and share ideas on process improvement.

Qualifications:
  • 4+ years of experience working as a technician or test engineer on electronic products in an engineering lab (combination of years spent in product design are also applicable).
  • Proficient using digital and analog testing equipment such as multimeters, oscilloscopes.
  • Excellent self-task management/prioritization and documentation skills in a R&D or testing lab environment.
  • Understands how to read and interpret schematics, installation sheets, and bill of materials.
  • Demonstrated analytical and problem solving skills with little to no supervision.
  • Interpersonal skills to work with several departments, including engineering and production.
  • Excellent verbal and written communication skills.
  • Experience working on failure probability models and risk mitigation plans.
  • General understanding of engineering equipment like soldering irons, hand-held power tools.
  • Expert on Microsoft Office (especially Excel and macros in Excel).
  • Ability to stand for long periods of time and lift up to 50 lbs. with or without reasonable accommodation.
  • Must be authorized to work in the U.S.A. without restrictions.

Preferred:

  • Experience with a Surface Mount Technology (SMT) a plus.
  • Knowledge of Engineering Graphical Packages.
  • Worked in the fire and gas industry with knowledge of regulatory standards such as UL268/217/521/EN54.
  • Expertise in Minitab, and/ Or LabVIEW.
  • Past experience with product design.

Educations:

  • Bachelors


  • Associate’s Degree in electrical technology, electrical test technician, or related field with 6+ years of experience. 2+ in an electrical lab test environment with remainder in product design.
  • Bachelor’s Degree in electronics engineering technology, engineering technology, or related field is preferred 2+ years of experience in an electrical lab test environment or product design.

 
Job Number: 2010111048
Job Location: CO Springs, CO
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Mike Flanery
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Email: northeastjobs@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000002fgGKQAY&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead EBU Integration Engineer

Description:
As the Lead EBU Integration Engineer you'll report to the Director of Propulsion IPT and be responsible for the integration and certification of the EBU installation for the business jet.

On any given day you might:
• Work with EBU lead to assist with layouts, design specifications and trade studies.
• Perform weights and tolerance analysis on EBU components.
• Work concepts to fit platform requirements.
• Collaborative design and support/mounting of EBU pneumatic and fluid components with stress analyst.
• Experience with manufacturing process and limitations of EBU components.
• Create EBU installation drawing and rigging instruction.
• Ability to work under pressure and well in a team environment.

We're looking for someone who has:
• A Bachelor’s Degree in a relevant engineering discipline
• 10+ years of hands-on experience in EBU development and integration for Military, Business Jet, and/or Commercial platforms
• Experience with development and integration of ECS, Fuel, Electrical, Hydraulics, and other powerplant-related systems is an advantage
• Experience using CATIA V5, Teamcenter, or equivalent CAD/PLM products.
• Experience generating qualification and certification reports
• Familiarity with current FAA and EASA regulations. Proficiency in Part 25 is preferred
• Demonstrated project management and leadership capability
• Demonstrated success working within highly empowered teams and working with a diverse group of people at every level in an organization.
• Ability to meet overall objectives under limited supervision
 
Job Number: 42-041
Job Location: RENO, NV
Rate: DOE
Per Diem: Yes
Overtime: No
Duration: 1 Year +
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PRECISION PERSONNEL INC
Attention: Matt Gregory
Address: 600 CLEVELAND ST STE 700
City, State: CLEARWATER, FL 33755
Phone: 727/449-0600
800 Phone: 877/600-2333
Fax Phone: 727/449-0627
Website: www.precisionpersonnel.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Lead Weight Engineer

Description:
We are seeking an experience Weight Engineer to fill an opening for an aerospace company in Nagoya, Japan. Interested candidates should have aircraft certification experience in relation to weight and center of gravity in addition to flight test experience.

Responsibilities of the Lead Weight Engineer​

Aircraft weight reduction activity and design weight growth study.
Certification activity related to weight and C.G.
Support of the sales, marketing, customer support, flight test, ground test and manufacturing tooling/process related to weight and C.G.
Checking the status and forecast of aircraft weight and C.G.
Checking the status weight of system and structure component vs target weight along with determining or revising the design weight and C.G. envelope.
Designing weight growth plans.
Preparation of weight report and mass data for analysis, tests and manufacturing tooling process.
Preparation of weight and balance manual.
Improvements of weight data gathering and verification process.

Requirements Lead Weight Engineer

15 plus years of aircraft certification experience in relation to weight and center of gravity.
Extensive flight test experience.
Previous Leadership experience required.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation).
Excellent verbal and written communication skills in English.
 
Job Location: Japan
Duration: 2 Years
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Susan McGlinsey
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Engineer

Description:
RF Electrical / Manufacturing Engineer

Job ID # 2020-11106

Contract Opportunity

Location: State College, PA

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: years



What You’ll Do:
•Applies general principles and techniques of Electrical Engineering
•Participates in electrical requirements analysis, functional analysis, performance analysis
•Participates in internal electrical reviews of electrical components, equipment and systems
•Design and test of microwave circuits including, filters, couplers, amplifiers, phase-locked oscillators
•Component identification, test, and verification
•Composing specifications and final reports
•Design modification of existing products due to part obsolescence and/or varying customer requirements
•Work and interface with other staff members in Engineering, Sales, Purchasing, Quality, and Production
•Generally works on diverse range of complex problems under limited direction
•Some travel maybe required
•May provide leadership and/or direction to lower level employees



What You’ll Need:
•Working knowledge of electrical engineering concepts, principles, and theories
•Working knowledge of electrical engineering design processes
•Use of electrical engineering CAD tools (block diagrams, schematics)
•Experience designing, prototyping, and testing electronic circuits
•Working knowledge of electronic test equipment such as power supplies, oscilloscopes, multi-meters, etc.
•Mastery knowledge of common electronic components circuits such as discrete transistor amplifiers, integrated op-amps, voltage regulators, etc.
•Basic electrical simulation using SPICE, etc.
•Working knowledge in Microsoft Office applications
•Good written and verbal communications skills
•Creative thinker
•Ability to recognize and clearly report information relevant to sound electrical engineering design
•Ability to work well in a team environment
•Willingness to take on problems they have not seen before, research, ask for guidance, and figure it out.
•Experience designing and troubleshooting microwave circuits up to 40GHz
•Hands on working knowledge of Low Noise Amplifiers, Block Converters, Line Drivers, and Solid State Power Amplifiers
•Microwave test equipment, including: Network analyzers, power meters, noise figure meters, spectrum analyzers, power supplies, oscilloscopes, etc.
•Experience with microwave circuit components, including BJTs, GaAsFETs, GaNFETs, MMICs, oscillators, isolators/circulators, filters, high frequency connectors, power dividers/combiners, lumped and distributed networks
•Prior experience with microwave design CAE simulation programs, including linear design software (e.g., Genesys, ADS, AWR, Ansys), EM simulation software (e.g., CST MWS, HFSS), cascade analysis software (e.g., AWR VSS, Genesys Spectrasys, Arden Syscalc, Appcad)
•Prior exposure to ATE systems controlled through Matlab or Labview
•Very hands on and willing to work with manufacturing floor employees that have varying degrees of experience.



*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree in electrical engineering, a related specialized area or field, combined with 5+ years of relevant experience; or Master’s degree combined with 3+ years of relevant experience.

What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-11106
Job Location: State College, PA
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Manufacturing Plant Facility Design Engineer

Description:
*This is a 1 year, full time, contract position located in Kingsport, TN*



We are seeking a PLC/Controls or Manufacturing Plant Design Engineer who will be assisting us in designing a chemical manufacturing plant. Part of this work will involve analyzing existing plant infrastructure and recommend upgrade plans and strategies.



Candidate will be responsible for electrical and control systems design and design review for transformers, motor control centers, lighting, bonding and grounding, lightning protection, instrumentation, networks, fire alarm systems, PLC control panels, and schematic wiring drawings



Duties will consist of interfacing with designer/drafters, help develop instrument and electrical equipment specification including sizing and analysis of medium/low voltage equipment and wiring, abet with PHA/HAZOP studies, Level of Protection Analysis (LOPA), National Electrical Code, and Safety Instrumented Systems including HAZMAT for flammable vapors.



Required:
*10 years’ experience in electro-mechanical design of manufacturing plants, particularly petrochemical or similar chemical plants
*Experience developing instrument and valve specifications
*Background in design of PLC based control systems
*Familiar with hazardous environment National Electrical Codes and related Safety Systems Design, MSDSs
*Engineering Degree, BSEE preferred



Pluses:

*Strong AutoCAD Plant 3D or P&ID experience

*PE license
 
Job Number: 231
Job Location: Kingsport, TN
Rate: $64
Per Diem: yes split
Input Date: 11/14/2020
Firm Name: CSS STAFFING
Attention: Tom Clarke
Address: 263 E MAIN ST 2ND FL STE A
City, State: NEWARK, DE 19711
Phone: 302/737-4920
Website: www.cssstaffing.com

Many New Long Term Aerospace Programs in Missouri

Description:
Stress Engineers: either metallics or composites (secret and non-secret)

Structural Designers: must be degreed and have UG NX experience

Electrical Design Engineers: must be degreed and have UG NX experience

Liaison/MRB Engineers: military or commercial background, MRB authority, degree from ABET accredited university

Tool Designers: UG NX background, aerospace or aircraft background

Aircraft Systems Engineers: systems engineers with avionics or software; DOORS or Rhapsody experience needed

Software Engineers: Ada, C++; avionics experience a plus

System Design Engineers: ECS, hydraulics and pneumatics, landing gear, UG NX experience

PDS Tech - #1 Aerospace supplier in Missouri
 
Job Location: Missouri
Input Date: 11/23/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy or Ken Brownsher
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Email: mmccarthy@pdstech.com; kbrownsher@pdstech.com
Website: www.pdstech.com

Material Handler III

Description:

The job is physical in that candidate must be able to climb stairs to get to a stockroom environment
They will work in a stockroom environment working on Kitting Electrical computer parts
Work with receiving and delivering small pieces received to distribute to the floor
Will be pulling items and delivering
Will use computer to track so must have computer familiarity
This is NOT a WAREHOUSE forklift material handler role
Basic level but requires physical fitness to handle stairs
Inventory, tracking, counting electronic pieces



 
Job Number: 1910103618
Job Location: Bohemia, NY
Duration: 12 months
Input Date: 11/14/2020
Last Updated: 01/22/2021
Firm Name: PDS TECHNICAL SERVICES
Attention: Patrick Mahoney
Address: 300 E JOHN CARPENTER FWY STE 700
City, State: IRVING, TX 75062
800 Phone: 866/224-2745
Email: cecjdallasav@pdstech.com
Website: https://pdsjobs.force.com/candidates/job_detail?id=a1i1T000003GQd8QAG&URLSource=cjhunter

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Design Engineer (Landing Gear or Hydraulic Actuators)

Description:
Candidates MUST HAVES:
• Catia V5 Detailed Modeling and Fault Tree Analysis (FTA) generation, layouts and checking experience
• US Citizen
• Experience with Landing Gear and/or Hydraulic Actuators

The Mechanical Design Engineer will report to a Lead on the F-35 Program. They will:
• Perform and/or oversee aspects of engineering standard work
• Must be fluent with detailed part and assembly definition (FTA) using Catia V5
• Ensure accuracy and adherence to Product Definition Standard Work in the communication of Design Intent through duties which includes:
o Understand, apply, and interpret Geometric Form Control to ASME Y14.5 & ASME 14.41 standards
o Create / review parametric 3D models and other definition files to Design intent and Product Definition standard work using the Catia V5 software
• Types of hardware include products such as:
o Hydraulic actuators
o Oleo-Pneumatic shock struts (single and dual stage)
o Landing Gear assemblies
o System routings (electrical and hydraulic)
• The Engineer will create detail design, developmental and production mechanical documentation such as detail drawings, assembly drawings, engineering change incorporations as part of Technical Data Packages in accordance with contractual specifications and UTAS policies
o Product definition includes:
Associated parts list
o Detailed part and assembly definition
• Experience with SMARTEAM PDM & MATRIX ONE for the approval and release of part definition and engineering changes (configuration management)
• Assist with driving improvements and harmonizing Acceptance Test Procedures using MS Word/MS Excel
• Drive improvements into daily activities, striving for right the first time and on time all the time (LEAN principles)
• Tolerance stack-up evaluation

Basic Qualifications:
• BS in Mechanical or Aerospace Engineering
• 5+ years design experience
• Proficient in Catia V5 detailed modeling and FTA generation, layouts and checking experience
• Working knowledge of materials and surface treatments
• Strong communication skills
• Knowledgeable of hydraulic actuator/system design, forgings, layouts, mechanical system and structural design
• Proficient with GD&T (ASME Y14.5, ASME Y14.100)
• Landing Gear and/or Hydraulic Actuator design experience
• Open minded, pro-active, quick learning ability and strong desire to learn
• Experience using SMARTeam – PDM
• Experience using MATRIX ONE – PLM
 
Job Number: 2010112606
Job Location: Fort Worth, TX
Overtime: possible
Duration: 1 year
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Systems Engineer

Description:
US citizenship required

In the role as a Mechanical Systems Engineer you will provide program support and technical leadership over requirements development / definition, requirements verification, technical subcontract management, technical trade studies, design sensitivity/optimization studies, detailed design, development, and analysis tasks on complex mechanical hardware including precision space structures and mechanisms in a program team environment. Candidate must have strong proficiency in 3D modeling, design for manufacturing, and ability to work independently or within a multi-disciplined team environment.

Responsibilities:
• Lead internal trade studies to identify third party space qualified stepper motors and gimbals to meet technical program requirements
• Develop subcontractor technical requirements specifications and statements of work for qualification and flight spacecraft motors and gimbal assemblies
• Perform technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for complex mechanical sub system.
• Leverage high reliability, flight-proven, heritage design concepts in order to produce high quality designs within an aggressive timeline
• Interface with outside suppliers/customers and other engineering disciplines to drive designs to closure (Structural, Thermal, Electrical, Manufacturing, Performance, Quality, Configuration Management)
• Present technical details at program reviews to customers, independent reviewers, and internal senior leaders
• Generate product architecture models with minimal guidance by leveraging heritage system models and top-down modeling techniques
• Develop, perform and/or oversee testing to show proof-of-concept and/or qualification of spacecraft mechanism designs (including stepper motor and gimbal assemblies)
• Support production operations with design of tooling, test equipment, and shop aids
• Provide regular status updates to Program Management and Project Engineers on cost and schedule performance



Qualifications:
• Bachelor’s Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience
• A minimum of 5 years supporting spacecraft mechanisms / electromechanical design
• Demonstrable professional experience and expertise with the design and manufacture of spaceborne stepper motors and gimbals
• Experience with requirements derivation and tracking using DOORs (or equivalent) including requirements verification traceability matrix (RVTM).
• Prior experience with development of spaceflight qualification test plans and oversight of spaceflight qualification test campaigns
• Experience in design of space-based mechanical structures and mechanisms design, along with engineering drawing development

____________________________________________________________________


Preferred Additional Skills:
• Experience interfacing directly with customers (both prime contractors and end customers) on resolving in-depth technical issues during the development and sell-off of space hardware
• Strong proficiency in design and 3D modeling of solids, surfaces, and assemblies (Creo, NX, Catia, Solidworks, Autodesk Inventor)
• Strong proficiency in creation of 2D engineering drawings – geometrical dimensioning & tolerancing (GD&T) per ASME Y14.5 standards
• Familiarity with structural analysis (FEA) of parts/assemblies
• Professional experience related to the design and manufacture of spaceborne hardware
• Experience in leading engineering teams from conceptual through detailed design phases.
• Experience building hardware in a high reliability environment, working with technicians
• Experience interfacing with machinist and designing parts for ease of manufacturing processes
• Strong familiarity with component level, sub-assembly level, and assembly level product testing.
• Proficiency with root cause corrective action (RCCA) tools (e.g. 5 why, fishbone)
• Proficiency with risk management and mitigation tools such as Failure Mode Effects Analysis (FMEA)
• Experience serving on a Material Review Board (MRB) – evaluate and disposition non-conforming hardware. Development of rework and structural repair procedures.
• Capable of serving as a design lead, integrated product team lead (IPTL), and/or Chief Engineer. Leading and supporting program design reviews (PDR, CDR).
• Familiarity with ISO 9000/AS-9100 Quality Management Systems.
• Familiarity with Lean Manufacturing, 5S, and Six Sigma fundamentals.
• Proficiency with fundamentals of project management (e.g. budget, schedule, technical execution, risk management). Strong proficiency in MS project scheduling.
• Proficiency working with a product data manager (PDM) software, and familiarity with configuration management best practices.
• Proficient in MS Word, Excel, and PowerPoint


Please send resumes to Becky Norman at bnorman@butler.com. Phone number 469-785-4744.

Butler America Aerospace, LLC. is proud to provide an equal opportunity workplace and be an affirmative action employer. Consider Butler because we are committed to hiring and retaining a diverse workforce. We recognize that we thrive on diversity for the benefit of our employees, our customers, and the communities where we are located. Employment with Butler America Aerospace, LLC. is governed on the basis of qualifications and competence without regard to race, color, religion, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, gender expression, marital status, mental or physical disability or any other legally protected status.
 
Job Number: 58917
Job Location: Palm Bay, FL
Rate: DOE
Per Diem: possible
Overtime: no
Duration: 6+ months
Start Date: April 2020
Input Date: 11/14/2020
Firm Name: BUTLER AEROSPACE & DEFENSE
Attention: Becky Norman
Address: SHELTON POINTE STE 204
2 TRAP FALLS ROAD

City, State: SHELTON, CT 06484
Phone: 203/926-2705
Fax Phone: 203/926-0082
Website: www.butler.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Mechanical Test Engineer

Description:
****MUST be a U.S. Citizen****

Job Description:
1. Design, implement, and maintain test processes for Space Systems hardware using lean philosophies and techniques.
2. Take a leadership role in driving action in the development, planning & implementation of timely and effective corrective actions for problems during product manufacturing and testing.
3. This can involve testing, data analysis, and interface with all aspects of the engineering department.
4. Duties include the interpretation/analysis of customer test requirements and subsequent cost estimates to support an appropriate test program.
5. Responsibilities also include daily interface with Program, Manufacturing, Quality and Engineering organizations to ensure that customer committed hardware and data deliveries are consistently met.

Typical Duties:
1. Support laboratory testing of Space hardware.
2. Develop and validate tooling concepts.
3. Author and maintain operation/test procedures.
4. Preparation of standardized operation/test sheets.
5. Defining test rig and facility requirements.
6. Participation on program Integrated Product Development teams.
7. Review drawings and concepts and resolve productivity concerns.

Required Experience:
1. Experience with advanced instrumentation and data acquisition systems is required.
2. Knowledge of LabVIEW desired.
3. Experience should also include five years working on the testing of complex electrical systems, testing and troubleshooting of complex FPGA (Fully Programmable Gate Array), digital and analog based electronic controllers, testing of components such as HED (Hall Effect Device) based pumps and brushless DC motors.
4. Applicant must have the capability of working independently and be self-motivated.
5. Excellent communication skills, written and verbal are required.
6. Ability to proficiently operate common Microsoft Office software products is required.

Education:
1. Bachelor’s degree required.
 
Job Number: 12257
Job Location: Windsor Locks, CT
Rate: $67.00/HR
Per Diem: No
Overtime: Possible
Duration: 12 mos
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: INCONEN CORPORATION
Attention: Patrick O'Neil
Address: 6133 BRISTOL PKWY STE 232
City, State: CULVER CITY, CA 90230
Phone: 310/410-1931
Fax Phone: 310/410-1751
Website: www.inconen.com

Pro/E Creo Designers

Description:
Mechanical or electrical design experience

Immediate needs - email a resume and call our national recruiters
 
Job Location: Nationwide
Input Date: 11/23/2020
Firm Name: ADDITIONAL CONTRACT SERVICES
Address: 85 RANGEWAY RD BLDG 1 STE 2
City, State: NORTH BILLERICA, MA 01862
800 Phone: 800/661-8272
Email: acs@acsnatl.com
Website: www.acsnatl.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Product Data Engineer

Description:
We are currently seeking a Data Engineer to fill a role with an international manufacturing company in Chesapeake, VA. This position will require working with Engineering, Design, Sales, and Marketing departments to identify, load and manage product data. Interested candidates should have a familiarity with CAD software and CAD architectures as well as knowledge of programming languages such as Visual Basic in applications like MS Excel or AutoDesk Inventor.

Responsibilities of the Product Data Engineer
Help investigate, define and document product business rules for use in the development of current and future projects.
Gather, organize and verify product data into a usable electronic format, involving creation or remapping of data. Data may include CAD drawings or models, BOMs and customer specifications.
Support Engineering, Design, Sales and Marketing teams to identify, load and manage product data.
Help define and implement management processes involving product data to maximize its usability.
Troubleshoot, support and maintain the integrity of inputs and outputs from the configuration product applications.
Organize CAD data and product rules into AutoDesk Inventor environment as well as automating the creation of 3D Models for a variety product configurations using Visual Basic macro engine.

Requirements
Bachelors Degree in Engineering (Mechanical or Electrical) or related technical discipline.
Working knowledge of programming languages such as Visual Basic in Applications like MS Excel or AutoDesk Inventor.
Familiarity with CAD software and CAD architectures.
Knowledge of relational databases is a bonus.
Excellent verbal and written communication skills as well as strong problem solving and organization skills.
Ability to work in a team environment.
 
Job Location: Chesapeake, VA
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Production Test Technician - no clearance CA

Description:
167926 Job Title: Production Test Technician

Work Site Address: Ventura, CA 93003
Job Number: 3496-1
Max Pay Rate: $31.00/hr
Start Date: 3/30/2020
End Date: 2/1/2021
Position Type: Contract

Job Summary:
Sets up test apparatus and conducts tests of electronic assemblies and units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.

Roles and Responsibilities
Adjusts and calibrates systems as required; modifies electronic equipment by adding, removing, or altering components as defined by predetermined diagrams and sketches.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.

Qualifications and Education Requirements
BA Degree is NOT Required.
HS Diploma is Required.
Experience and knowledge of electrical blueprints, troubleshooting and repairs is Required.

Skills: Category Name Required Importance Experience
Areas of Expertise Electrical Yes 1 4 - 6 Years
Areas of Expertise Electrical Troubleshooting Yes 1 4 - 6 Years
Technical Skills Electrical Diagnosis/Repair Yes 1 4 - 6 Years
Technical Skills Electrical Standards Yes 1 4 - 6 Years
Technical Skills Electrical Testing Yes 1 4 - 6 Years

Qty 1 positions
Hourly Pay Rate Range $27-$31 (Based on candidate experience)
 
Job Number: LMRMS-3496-1
Job Location: Ventura, CA
Rate: 31/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Project Planner / technical writing experience required - no clearance SC

Description:
167929 Job Title: Project Planner

Work Site Address: Greenville, SC 29605
Job Number: 3500-1
Max Pay Rate: $29.00/hr
Start Date: 3/27/2020
End Date: 3/29/2021
Position Type: Contract

Job Summary:
Plans sequence of fabrication, assembly, installation, and other manufacturing operations relating to specific portion of the product for guidance of production workers.

Plans detail operations from blueprints, engineering orders, change notices, and other engineering releases. Determines the need for tooling and makes recommendations for the design and planning of required tools. Prepares shop work orders for materials and product processing and coordinates with schedulers to ensure that items are being processed according to specifications and time requirements. Maintains progress reports, schedules, and other related records.

Technical Writer - Writes, in clear and concise language, such technical documents as aircraft work documents and work instructions related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications. Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, bulletins, manuals, or similar publications.

Main job junction is to write detailed instructions for determined processes

Skills: Category Name Required Importance Experience
Areas of Expertise Technical Writing Yes 9 2 - 4 Years
Soft Skills Advanced Communication Skills Yes 5 6+ Years
Software Skills MS Excel Yes 1 4 - 6 Years
Software Skills MS Office - Intermediate Level Yes 3 2 - 4 Years
Software Skills SAP No 1 2 - 4 Years
Technical Skills Ability to Read Engineering Drawings Yes 9 2 - 4 Years
Technical Skills Ability to write technical documents and end-user documentation Yes 9 2 - 4 Years
Technical Skills Data Entry Yes 7 2 - 4 Years
Technical Skills Technical Writing Yes 9 2 - 4 Years

Qty 1 position
Looking for proved performance to the job description as well as the required skills.
 
Job Number: JEG-3500-1
Job Location: Greenville, SC
Rate: 29/hr max
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Quality Manager - Aerospace - Everett WA

Description:
Our client in the Seattle area is a part of a leading design and manufacturer of aerospace products and is looking for a Quality Manager.

Keltia Design Inc. is a technical support services company providing Aerospace Design, CAD Training along with Specialized Technical Recruiting services to mainly the aerospace industry in WA and CA, and other locations around the US and Canada. We have been in business for nearly 20 years in the US and over 8 years in Europe.

Quality Manager - Aerospace - Mar 2020
Job Description:

Utilize quality science techniques to effect continuous performance improvement at assigned suppliers;
Reviews, analyzes, and reports on quality discrepancies related to process, assembly, manufacturing, mechanical, electrical, hydraulic, or electro-mechanical systems;
Ensure that performance and quality of products conform to established company and regulatory standards;
Use surveillance and auditing techniques to identify opportunities for process and product improvement; Interfaces with manufacturing, engineering, customer, supplier, and procurement (as appropriate) to ensure requirements / expectations are satisfied;
Facilitate development of supplier recovery plans;
Monitor and evaluate supplier process for compliance to purchase order and engineering requirements;
Collaborate with supplier to investigate root cause and corrective actions when process or product deficiencies are detected;
Identify, plan, and facilitate cross-functional improvement activities;
Deploy variation management tools and techniques at select suppliers to mitigate risk;
Have performed Quality System Audits, AS9102 First Article Reviews;
Computer proficiency and proficiency with MS Office products.
Essential Skills:
*Quality System Management
*System Integration Skills
*FAA Relationships
*Boeing Relationships
*AS 9100 Rev D. Audit Responsibility
*Audit & Assessment Responsibility such as Boeing and FAA
*Receiving Inspection Control
*Quality Process & System Management
*Final Product Control
*RFC Release
*Conformity of Products
*Procedure Updates
*Quality Manual Management
*PMA Parts Control
Additional Comments

Aerospace supplier experience is preferred and may be used as the primary selection criteria among equally qualified candidates.
 
Job Number: KD32020c
Job Location: Everett, WA
Rate: DOE
Per Diem: Possible
Overtime: Possible
Duration: LT
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: KELTIA DESIGN INC
Attention: Jason Ruppert
Address: 2333 SEA WAY BLVD STE 212
City, State: EVERETT, WA 98203
Phone: 206/368-9812
Fax Phone: 206/237-8950
Website: www.keltia-design.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
RF Technician

Description:
RF Technician

Job ID # 2020-11105

Contract Opportunity

Location: Scottsdale, AZ

Industry: Aerospace & Defense

Clearance Requirement: Secret

Minimum Education: Associate’s Degree

Minimum Experience: 5 years



What You’ll Do:
•Work under the direction of a technical lead and be part of a design team, working in a lab environment conducting tests and aiding in the integration of the design at the board, module, and higher levels of product integration.
•Be a working member of the overall RF/Systems Engineering team on next generation secure communication products.
•Test, analyze and repair GDMS engineering, network and telecommunications technologies, as well as other technical issues that impact development and/or operations.
•Responsible for the planning, calibration, installation and maintenance of the organizations equipment, components, devices and systems.
•May also be asked to develop test specifications and procedures and are sometimes tasked with report preparation and documentation of technical issues.



What You’ll Need:
•Secret security clearance is required.
•Experience working with RF test equipment up to 40 GHz. This includes vector signal network analyzers, communication signal analyzers and a variety of spectrum analyzers as well as high speed oscilloscopes.
•Experience automating test process though software such as Labview.
•The ability to control test equipment using Labview is very desirable although not a requirement.
•Ability to develop test procedures, maintain test equipment integrity and generate test reports
•Conduct tests and aide in the integration of board design, module, and higher levels of product integration
•Experience working with large signal characterization of high power amplifiers including Pout, IIP2, IIP3, and P1dB compression point as well as load pulls of discrete devices and circuits. Thermal management of the test environment and experience working with cold plates as well as environmental chambers.
•Applicant will work under the direction of a technical lead and be part of a design team experienced in modeling and characterizing board level circuit designs, packaging, antennas, and RF front-ends
•Proficient in Microsoft Office applications
•Strong written and verbal communications skills
•Ability to recognize and clearly report information relevant to sound electrical engineering design
•Practice creative thinking and ideation to advance our business performance
•Deliver innovative, flexible, integrated solutions to meet customers changing business needs
•Support and engage in programs, projects and practices behind the company culture and strategy, and comply with all policies and procedures
•Follow industry and department policies and regulations to company services are consistent with, and/or superior to, industry best practices
•Preferred: ◦Experience or interest with Software Defined Radios
◦Practice creative thinking and ideation to advance our business performance
◦Deliver innovative, flexible, integrated solutions to meet customers changing business needs
◦Support and engage in programs, projects and practices behind the GDMS culture and strategy, and comply with all policies and procedures
◦Follow industry and department policies and regulations to ensure General Dynamics Mission Systems services are consistent with, and/or superior to, industry best practices






*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Associate’s degree combined with 5+ years of relevant experience.

What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-11105
Job Location: Scottsdale, AZ
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secondary Flight Control Systemd Compliance Engineer

Description:
We are seeking an experienced Compliance Engineer to fill a position for an aerospace company here in Nagoya, Japan. Interested candidates should have 10 plus years of Compliance experience as well as Secondary Flight Control Systems experience.

Responsibilities of the the Secondary Flight Control Systems Compliance Engineer

Evaluate the current aircraft design, with respect to compliance of the Secondary Flight Control System as required by airworthiness regulations.
Conduct verification and showing-compliance activities, such as Design Reviews, inspections and analysis.
Conduct tests, witness tests and creating test reports.
Work closely with the other team members to identify and escalate aircraft and program certification Issues to management.
Review certification documents, including CPs, compliance reports, and IP/CRI/CAI positions, as an independent checker to ensure quality of certification products, prior to regulatory review.
Support alignment of company proposals to globally accepted standards for certification and compliance.
Conduct coordination with related parties such as JCAB, FAA and EASA.
Manage the scheduling of all certification activities.

Requirements

Excellent working experience in commercial aerospace.
4 year degree in Engineering (Aerospace, Avionics, Electrical, or Instrumentation)​
10 plus years of experience as Compliance Engineer for Secondary Flight Controls Systems.
Excellent communication skills.
 
Job Location: Japan
Input Date: 11/14/2020
Firm Name: VELOCITY CONSULTING SOLUTIONS
Attention: Andrew Bondy
Address: 20306 15TH AVE NE STE A
City, State: SHORELINE, WA 98155
Phone: 206/812-1061
Website: www.velocity-cs.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Secret Clearance Aerospace Engineers

Description:
We are looking for aerospace engineers ( Stress engineer, Electrical Design Engineer, Structures Design Engineer) with secret clearance.

Please email cpham@jsginc.com for more info.
 
Input Date: 11/14/2020
Firm Name: JOHNSON SERVICE GROUP
Attention: Candace Pham
Address: 1600 AIRPORT FWY STE 400
City, State: BEDFORD, TX 76022-6871
Phone: 817/545-4009
Fax Phone: 817/545-2006
Website: www.jsginc.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sights and Sensor Engineer

Description:
Sights and Sensor Engineer

Job ID # 2020-11093

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 9 years



What You’ll Do:
•Support architectural analysis, trade studies, requirements analysis, engineering reviews, design, test, and qualification.
•Support component selection, procurement, and oversight of hardware build.
•Support board level programming
•Support creation of circuit board specifications, ICD's, and test plans.
•Review and develop hardware and software requirement documents and test plans.
•Design, develop, and test electronics, components, and subsystems in support of integration of thermal imaging systems, cameras, lasers, radar, direct view optics, and stabilized control systems.
•Support the integration & testing of electrical control devices and sights and sensors on the various vehicle platforms.
•Work with other members of the engineering staff to ensure the product meets its requirements.
•Prepare and present written reports, status reports, and presentations as necessary.
•Provide technical support and communication to the company program office, company customers, and other departments within the company.



What You’ll Need:
•Experience with Micro-controllers or FPGAs preferred.
•Experience with Analog and Digital Video Circuits (RS-170, HD-SDI, LVDS, DVI, and Display-Port) preferred.
•Familiarity with Military Standards and test requirements.
•Ability to use engineering development and Tools.
•Capable of Obtaining a Security Clearance preferred.
•Occasional overtime, and weekend hours may be required to complete critical tasks.
•Strong Interpersonal skills and ability to work with interdisciplinary teams.
•Experience with Microsoft Office tools.



*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree in electrical engineering combined with 9+ years of relevant experience.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-11093
Job Location: Sterling Heights, MI
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Software Engineers

Description:
STS Technical Services is hiring Software Engineers in Melbourne, Florida.

Duties & Responsibilities:
Work on control and communications systems for state-of-the-art Infrared based vision products that are critical components for various existing surveillance and targeting systems.
The software runs on higher-end embedded processors, or integrated processor/FPGA devices residing on complex circuit cards designed by in-house electrical engineering teams.
The software is generally “C” code running either bare-metal or within an RTOS, and includes boot-up, BIT, control code, peripheral drivers, and communications, including 1553, Ethernet, and PCI.
Participate in the full life cycle of product development including requirements gathering; project estimating, architecture, design, coding, release, testing, manufacturing and field support.
Participate in peer reviews, design discussions, and looked upon to recommend solutions, achieve engineering buy-in and follow up by executing and integrating your design on schedule.
Document your designs as specified by client and program requirements and follow development processes.
May be called upon to participate in the preparation of complex and significant proposals.
Provide technical expertise and assistance to other engineers and support personnel.
Interact with technical management, other professionals, technicians and support personnel to coordinate, recommend and confer regarding technical activities and progress.
Mentor and coach the work of others as assigned.
Qualifications:
BS or MS in Computer Science / Electrical Engineering or related field.
6+ years of embedded software development with a strong acumen for working at the processor and hardware level.
Ability to read schematics and to influence and debug HW designs during the hardware and software development process.
Significant experience in “C” or “C++” and Real Time OS is required. C++, ADA, Web, Prototyping, Validation, and Scripting languages are nice to have.
Previous experience with some of the following: Xilinx Zynq, ARM Cortex, Smart Fusion, SOCs such as MSP430s, PICs, Power PC, or even Intel Architecture.
Knowledge of FPGA development and developing SW that works in conjunction with FPGA designs is a plus.
Strong debugging skills resulting from your mastery of both the HW, FW, and SW running on the system, and understanding how they interact with each other.
Experience working with embedded development kits BSPs, and SDKs.
Experience helping with board bring-up, and using your code and the usual lab tools to assist with solving HW problems.
Device Driver Development.
Knowledge of communicating with and operating UART, SPI, & I2C devices is required.
Knowledge of Software Security Hardening, Trusted Computing / TPM, Digital signing of releases, secure booting, and STIG analysis is a big plus.
Familiarity with GIT, JIRA, Subversion (or some other similar CM tools).
Experience with PC systems and using them with the Microsoft Office suite for daily activities.
Must be a motivated, self-starter with the ability to either work on your own, or work well in a team environment.
About STS Technical Services:

STS Technical Services is a Top 100 Staffing Firm that’s partnered with some of the largest names in the aerospace, manufacturing, defense and industrial industries.

Our professional recruitment teams put talented individuals to work at client locations all over the world, and we have hundreds of exciting career opportunities for you to explore!

If you want to speak to a Recruiting Professional directly, call 1-800-359-4787.

STS Technical Services is an equal opportunity employer.
 
Job Number: 33816
Job Location: Melbourne, FL
Input Date: 11/14/2020
Firm Name: STS AEROSTAFF SERVICES
Address: 2000 NE JENSEN BEACH BLVD
City, State: JENSEN BEACH, FL 34957
800 Phone: 877/707-5767
Fax Phone: 877/707-5767
Website: www.stsaviationgroup.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr Advanced Systems Engineer

Description:
Sr Advanced Systems Engineer

Job ID # 2020-11131

Contract Opportunity

Location: Bloomington, MN

Industry: Aerospace & Defense

Clearance Requirement: Ability to Obtain Secret

Minimum Education: Bachelor’s Degree

Minimum Experience: 8 years



What You’ll Do:
•Lead formulating operational concepts; performing mission, functional, cost-benefit, and risk analysis; selecting systems architecture; and preparing specifications company’s operating systems to ensure designs meet applicable specifications.
•Synthesize solutions to meet customer expectations and technical performance while staying within schedule and cost constraints
•Research and analyze data, such as vendor products, COTS components, GFE/CFE, specifications, and manuals to determine feasibility of design or application
•Perform or lead the development of technical strategies and teaming strategies on multiple projects
•Lead small technical proposals and contributes to medium sized proposals
•Exercise considerable latitude in determining technical objectives of assignments
•Work on advanced architectures that may result in new business for the company
•Design a complete and complex framework, system or product

What You’ll Need:
•Ability to Obtain Secret clearance.
•Agile experience is preferred.
•Substantial experience specifically in Radar Signal Processing (e.g. design requirements for radar systems, tactical or simulation algorithm prototyping or implementation)
•Strong knowledge of radar signal processing and analysis
•Proficient with MATLAB and C/C++ programming languages
•RF background with a working knowledge of electronic scanned antennas, receivers, exciters, and digital signal processing
•Demonstrate advanced decision-making skills while meeting creative, innovative responsibilities
•Knowledge of hardware and software integration
•Strong written and verbal communications skills
•Preferred:◦Electronic Warfare (EW), Electronic Intelligence (ELINT) experience
◦Hold active Secret Level DOD Clearance
◦Modeling and Simulation activities
◦Single and multi-processor/core environments
◦Familiar with vector/signal processing libraries
◦Coursework and/or experience with digital signal processing, probability theory, stochastic signal processing, and electromagnetic theory




*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s Degree in systems engineering, or a related specialized area, combined with 8+ years of relevant experience; or Master’s degree combined with 6+ years of relevant experience.
•Preferred degree types: Electrical Engineering, Math, Physics, or equivalent

What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.



Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-11131
Job Location: Bloomington, MN
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Electrical Design Engineer

Description:
A Sr. Electrical Design Engineer job in Dedham, MA is currently available through Belcan. In this role, you will be responsible for developing high-speed secure communications and control products. To be considered for this role, you will have a Bachelor's degree in Electrical Engineering, a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret Security Clearance is required at the time of hire.

Sr. Electrical Design Engineer Job duties:

* Translate customer requirements into well-defined elements that formulate highly reliable, cost sensitive products.
* Develop complex circuit cards with embedded processor and FPGA-based solutions.
* Develop high-speed secure communications and control products.

Qualifications:

* Mentor tools Suite (schematic entry, layout, routing, SI, power analysis).
* High speed circuit design using advanced materials and packaging techniques.
* Extremely low power, battery operated design.
* High reliability, extreme environment design.

If you are interested in this Sr. Electrical Design Engineer job in Dedham, MA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298187
Job Location: Dedham, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. FPGA Engineer

Description:
A Sr. FPGA Engineer job in Dedham, MA is currently available through Belcan. In this role, you will be responsible for developing high speed secure communications and control products. To be considered for this role, you will have a Bachelor's degree in Electrical or Computer Engineering, a related specialized area or field, plus a minimum of 8 years of relevant experience. A current active Department of Defense Secret Security Clearance is required at the time of hire.

Sr. FPGA Engineer Job duties:

* Translate customer requirements into well-defined elements that formulate highly reliable, cost sensitive products.
* develop complex FPGA-based solutions from concept, through design, synthesis, timing, analysis, UVM based verification, lab integration, formal test, and production support through product lifecycle.
* Creates test and simulation plans that establish functional criteria.
* Verifies test results and analyzes performance.
* May also review vendor capabilities, foundry technologies, device libraries and simulation tools.

Qualifications:

* VHDL and Verilog.
* Xilinx and Altera FPGA tools and processes.
* SystemVerilog/UVM based design verification.
* ChipScope or equivalent.

If you are interested in this Sr. FPGA Engineer job in Dedham, MA, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 298186
Job Location: Dedham, MA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal ASIC/FPGA Engineer

Description:
A Sr. Principal ASIC/FPGA Engineer job in Scottsdale, AZ is currently available through Belcan. In this role, you will be responsible for leading and managing verification of FPGA/ASICs. To be considered for this role, you will have a Bachelor's degree in Electrical, Computer, or Systems Engineering, Computer Science, a related specialized area or field, plus a minimum of 10 years of relevant experience. Due to the nature of the work performed in this facility, US citizenship is required

Sr. Principal ASIC/FPGA Engineer Job duties:

* Development of verification matrix to ensure coverage of requirements.
* Defining regression test suits.
* Managing regression simulations.
* Tracking and resolving design bugs.


Qualifications:

* Eight to ten years of experience leading/managing verification of FPGA/ASICSs.
* Eight to ten years of experience using System Verilog for verification.
* Five or more years of experience with Open Verification Methodology (OVM), Universal Verification Methodology (UVM) or Verification Methodology Manual (VMM).
* Experienced with developing testbench infrastructure (agents, drivers, monitors, interfaces, scoreboards, environments, etc.).

If you are interested in this Sr. Principal ASIC/FPGA Engineer job in Scottsdale, AZ, please apply via the 'apply now' link provided.
Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for nearly 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.

 
Job Number: 297263
Job Location: Scottsdale, AZ
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Electrical Engineer Circuit Design 4 - URGENT CA

Description:
1843 Sr. Principal Engineer Circuit Design 4 (Job Number: 20003804)
Number of Openings: 5
Location(s): United States-California-Manhattan Beach

United States-California-Redondo Beach
Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Dec 31, 2021

Pay Rate: $75 to $80/hr
Work Schedule:9/80
Duration of Assignment: Up to 1 year

The Ground Systems Development Department in Manhattan Beach, CA is seeking a talented electrical engineer to develop and integrate complex electronic Test Sets and hardware units. The hardware development responsibilities include architecture design, detailed design, test, integration, customer briefings, and post-delivery support of satellite system Test Sets and ground units. The candidate will work closely with other engineering functions, including Flight Engineering, Systems Engineering, Product Engineering, Production, and Procurement to meet schedule and design requirements. The ideal candidate has a broad range of experience with design, integration, and test of Digital and Analog circuits, PCBs, drawers, FPGAs, units, and subsystems and is capable of leading a small team.


Basic Qualifications:
Bachelor’s Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution plus 9 years of experience in an Engineering Environment; OR, a minimum of 7 years of experience with a Master’s Degree in STEM
Design and test experience in digital technology

Preferred Qualifications:
Design and test experience in Analog/RF technology
Master’s Degree in Electrical or Computer Engineering from an accredited institution
Excellent written and verbal communication skills
 
Job Number: JK-1843ATO
Job Location: Manhattan Beach, CA
Rate: 80/hr max
Per Diem: pd split possible
Duration: 9 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Sr. Principal Engineer Circuit Design 4

Description:
The Ground Systems Development Department in Manhattan Beach, CA is seeking a talented electrical engineer to develop and integrate complex electronic Test Sets and hardware units.  The hardware development responsibilities include architecture design, detailed design, test, integration, customer briefings, and post-delivery support of satellite system Test Sets and ground units.  The candidate will work closely with other engineering functions, including Flight Engineering, Systems Engineering, Product Engineering, Production, and Procurement to meet schedule and design requirements.  The ideal candidate has a broad range of experience with design, integration, and test of Digital and Analog circuits, PCBs, drawers, FPGAs, units, and subsystems and is capable of leading a small team.
  
Qualifications:
Basic Qualifications:


Bachelor’s Degree in Electrical or Computer Engineering, or another STEM degree from an accredited institution plus 9 years of experience in an Engineering Environment;  OR, a minimum of 7 years of experience with a Master’s Degree in STEM
Design and test experience in digital technology

Preferred Qualifications:
 
Design and test experience in Analog/RF technology
Master’s Degree in Electrical or Computer Engineering from an accredited institution
Excellent written and verbal communication skills
DOD, SCI, or SSBI clearance
 
Job Number: x20200038
Job Location: Manhattan Beach, CA
Rate: $75/hr
Duration: up to 1 year
Input Date: 11/14/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer ASIC/FPGA (VHDL) Designer CA

Description:
Staff Engineer ASIC/FPGA (VHDL) Designer (Job Number: 20004560)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 30, 2020
Target End Date: Mar 26, 2021

Pay Rate: $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

This position is based at our Space Park campus in Redondo Beach, CA. Duties include VHDL design of ASIC and/or FPGA logic, verification via simulation and emulation (lab testing), synthesis, and timing analysis.

Additional responsibilities include:
Designs and develops circuits used in electronic devices. device evaluation and characterization, test box design, prototype construction and checkout, and determination of wafer fabrication processes. Prepares test methods and specifications; analyzes equipment to establish operating data and conducts experimental tests; provides finished device approval; and prepares customer application information.

Basic Qualifications:
- Bachelor’s Degree in Electrical or Computer Engineering from an accredited institution with minimum of 14 years of experience with Logic Design in VHDL or Verilog; or 12 years of experience with Masters Degree

Preferred Qualifications:
- Hands-on lab experience with testing of digital hardware is highly desired
- Experience with Digital Signal Processing (DSP)
- 15 years or more of digital Logic Experience
 
Job Number: JK-1848ATO
Job Location: Redondo Beach, CA
Rate: 90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design

Description:
Tasks of this role include collaboration with systems engineering, mechanical and electrical engineers to perform Digital Unit Development. The qualified candidate will be a digital design engineer who will work on digital hardware development with applications in signal processing, modem design, network routing and switching, or embedded processors for air and space applications. Responsibilities include but are not limited to:

-  Digital Hardware Development
-  Coordination with other design specialties such as packaging engineering
-  Requirements development & flow down
-  Support test Hardware development
-  Interface analysis
-  Board/unit Integration & test

Qualifications:

Basic Qualifications:


 - Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 14 years of experience or 12 years of experience with a Masters Degree.
- A minimum of 14 years of experience in hardware design development or production
- Must be able to obtain and maintain an active U.S. Government security clearance

Preferred Qualifications:
 
 - 15 years of experience developing/testing Electronics for military or spacecraft applications
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on  knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 - Security Clearance (any level) 
 
Job Number: x20200037
Job Location: Redondo Beach, CA
Rate: $90/hr
Duration: up to 1 year
Input Date: 11/14/2020
Firm Name: XPEERANT
Attention: Woody Arnold
Address: 4308 N GARFIELD AVE
City, State: LOVELAND, CO 80538
Phone: 970/282-9287
Website: www.xpeerant.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design CA

Description:
Staff Engineer Digital Board Design (Job Number: 20004461)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 30, 2020
Target End Date: Mar 26, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Tasks of this role include Digital Signal Processing Architecture, particularly focused on MODEM design. The qualified candidate will be a digital DSP design engineer who will work on digital hardware development with applications in signal processing, modem design for air and space applications. Responsibilities include but are not limited to:

- Digital Hardware Development
- Simulation (Communications, signal processing)
- Requirements development & flow down
- Work with other designers, such as FPGA designer to help implement design
- Help develop test plans for testing developed hardware

Basic Qualifications:
- Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 10 years of experience;
- A minimum of 10 years of experience in DSP hardware design development
- DSP Simulation experience

Preferred Qualifications:
- 15 years of experience developing/testing Electronics for military or spacecraft applications, 10 of those in DSP design
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 
Job Number: JK-1847ATO
Job Location: Redondo Beach, CA
Rate: 85-90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Staff Engineer Digital Board Design CA

Description:
Staff Engineer Digital Board Design (Job Number: 20004358)
Number of Openings: 4
Location(s): United States-California-Redondo Beach

Shift: 1st Shift
Target Start Date: Mar 2, 2020

Target End Date: Feb 26, 2021

Pay Rate: $85 to $90/hr
Work Schedule: 9/80
Duration of Assignment: Up to 1 year

Client is looking for an experienced digital board designer to join its team at the Redondo Beach, CA location.

Tasks of this role include collaboration with systems engineering, mechanical and electrical engineers to perform Digital Unit Development. The qualified candidate will be a digital design engineer who will work on digital hardware development with applications in signal processing, modem design, network routing and switching, or embedded processors for air and space applications. Responsibilities include but are not limited to:

- Digital Hardware Development
- Coordination with other design specialties such as packaging engineering
- Requirements development & flow down
- Support test Hardware development
- Interface analysis
- Board/unit Integration & test

Qualifications

Basic Qualifications:
- Bachelors of Science degree in a STEM field from an accredited institution with a minimum of 14 years of experience or 12 years of experience with a Masters Degree.
- A minimum of 14 years of experience in hardware design development or production

Preferred Qualifications:

- 15 years of experience developing/testing Electronics for military or spacecraft applications
- Digital or Mixed signal unit, slice, board, and/or ASIC/FPGA design and development experience
- Master’s or PhD degree in Electrical or Computer Engineering or other Engineering field from an accredited institution
- Hands-on knowledge of programmatic/cost account management (CAM) processes, project planning and scheduling, cost control, change control, EVMS, staffing, coordination and oversight of technical work effort
- Proven leadership experience and the ability to manage engineers and technicians in a process driven environment
- Experience in program execution and demonstrated ability to meet program technical, cost, and schedule milestones
- Exceptional communication skills (verbal, written, presentation) across all levels of the organization
 
Job Number: JK-1846ATO
Job Location: Redondo Beach, CA
Rate: 85-90/hr max
Per Diem: pd split possible
Duration: 12 months
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Avionics Cockpit Systems Engineer

Description:
The Systems Engineer, Cockpit Avionics will be responsible for some or all systems related to:
• System 23 – Communication
• System 31 – Indicating and Recording Systems
• System 42 – Integrated Modular Avionics
• System 45 – Central Maintenance Systems
• System 46 – System Integration and Display

***Systems Engineers MUST HAVE experience with a direct design role in a program that has certified a new aircraft***

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working knowledge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 376
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Navigation Systems Engineer

Description:
The Systems Engineer, Navigation will be responsible for some or all systems related to:
• System 34 – Navigation
• System 92 – Radar
• System 93 – Surveillance

Responsibilities:
• Generate, review, approve, and manage system requirements – including but not limited to regulatory, safety, human factors, design, environmental, manufacturing, quality, operational, and service requirements
• Serve as the system-level expert for integration and coordination activities with various departments and the certification authorities
• Conduct multi-disciplinary design reviews throughout the different phases of development, certification, and production readiness as required to coordinate and communicate system design projects
• Conduct trade studies, analyses, and test programs as necessary to validate system architectures meet all requirements
• Generate, review, and approve
• System safety analyses, such as FHAs, FTAs, CCAs, etc.
• Engineering drawings, schematics, and design specifications
• System and equipment test plans and reports
• Compliance documentation
• System engineering processes
• Coordinate as required to execute and manage system design projects, testing, certification, production readiness, etc.
• Work with various company departments to ensure equipment and low-level designs meet all system and aircraft-level requirements.
• Various project management tasks as required

Required:
• Skilled at creating and reviewing technical schematics, logical and functional diagrams, and engineering specifications
• Previous experience with aircraft systems
• Working knowledge of 2X.1309 analyses and processes, including Advisory Circular 23.1309-1E, SAE ARP 4761, and SAE ARP 4754A
• Working knowledge of DO-160G environmental qualification
• Excellent problem solving, communication, and technical writing skills
• Basic knowledge of FAA regulations and guidance material and industry standards
• Bachelor of Science in Engineering required; Electrical, Mechanical, or Aerospace Engineering preferred
• Proficient in English
• Proficient with Microsoft Office and Google Docs

Desired:
• Working knowledge of avionics and related equipment, technical standard orders, and minimum performance standards
• Working kndge of DO-178C and DO-254 processes and aviation database management
• Previous experience managing complex sets of requirements
• Previous experience preparing and presenting design reviews for complex, highly integrated systems
• Previous experience defining system controls, crew indications, and flight manual procedures
• Previous experience in testing, including instrumenting, data acquisition, and documenting and analyzing results
• Whole-aircraft FAA certification program experience, Part 23 or Part 27 preferred
• Experience and involvement with industry groups to develop consensus standards
• 5+ years of relevant industry experience
• Private pilot certificate or higher
• Familiar with Dassault Systèmes engineering and management tools

POSITION MAY INCLUDE ACCESS TO TECHNOLOGY THAT IS SUBJECT TO U.S. EXPORT CONTROLS.



The Structures Company is an AA/EOE.
 
Job Number: 378
Job Location: Northern CA
Rate: OPEN - **DOE**
Per Diem: Yes
Duration: DIRECT POSITION
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: STRUCTURES COMPANY LLC
Attention: Debbie Aubert
Address: P O BOX 2278
City, State: SEAL BEACH, CA 90740
Phone: 714/823-3000
Website: www.thestructurescompany.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Team Lead Help Desk

Description:
Belcan is looking to hire a Team Lead Help Desk in the Indianapolis, IN area. In this role, you will act as a Subject Matter Expert and lead a Windows 10 transition project, ensuring that critical automation tools are smoothly operating without error throughout this process with minimal downtime in the manufacturing process.

Team Lead Help Desk job responsibilities:
* Create a complete project scope for the transition of Win7 to Win10 transition which includes a detailed schedule and resource list to upgrade tools listed below, as well as other tools heavily used in the manufacturing process onsite

* Analyzes, diagnoses and repairs on control systems and unit controller software such as SCADE, MKS equipment, IBM Doors, Motion Controls Software such as RMC, and other manufacturing/supplier software tools related to the automotive and/or aerospace industries.

* Performs end-to-end testing, programming, starting up, performance verification, and servicing on assigned project, includes variable frequency drives, wiring and control panels of these systems.

* Maintain and update system schematics through red line system changes and create if necessary, mechanical and control system schematics.

* Maintain Controls Database with up to date digitized hardware manuals, notes, photos, schematics, and UL data.

Qualifications:
* 2-3 years of hands-on experience with Windows 7, 10, MS Server and MS Office software including Excel, Access

* 2-3 years-experience with Automotive/Aerospace manufacturing control and monitoring systems and their components preferred.

* Strong knowledge on automation systems, Windows Operating systems, electrical and building operation with proven analytical and troubleshooting skills.

* Experience with computerized maintenance management systems (CMMS).

 
Job Number: 299947
Job Location: Indianapolis, IN
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: AlexisKruzel
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer / RCDD

Description:
Our client is seeking a Technical Designer to join our team of qualified, diverse individuals. This position will be located in Raleigh, NC. This is an on-site position with no telecommute possibilities.

• This position will perform senior-level functions and interface with senior client and its vendors' technical personnel.
• This position will require short term travel 70-75% (Travel is Mon-Fri)
• This position will require occasional overtime and possibly night/weekend work.

Roles and Responsibilities include but not limited to:
• Perform Site Survey Layer-1 Designs for all pathways and support systems, including Multi floor pathways and penetrations for Fiber Optical Cable / Copper Backbones. (Large facilities from 200,000 to 1.5 million sq. ft., open floor work environments.)
• Perform QA Inspections - of the wiring installations during Mid-Point and Final Site Inspections, ensuring compliance of Manufacturer, Industry, NEC, and client design standards. (Identify, document, and report all discrepancies.)
• Candidate will perform random QA Sampling (testing) of copper and fiber during Final Site Inspection, comparing findings with vendor provided Test Results.
• Provide Network Design, and Project Coordination with client telecom teams.
• Coordinate with other trades and sub-contractors as needed to provide and include electrical and HVAC requirements for Consolidated Computer Room (CCR), Telecom Rooms (TR), and Telecom Enclosures (TE).
• Coordinate and produce structured cable designs to support work area outlet types, configurations, and locations.
• Create project scope of work based on project design and technology requirements and criteria.
• Discuss with the contractor how client expects the Fiber and Copper to be installed, terminated, tested, and the test results will be delivered to clients.

Minimum Qualifications: To be considered for this position, you must minimally meet the knowledge, skills, and abilities listed below:
• Bachelor's degree and 5 years experience. 4 years additional experience may be considered in lieu of degree.
• BICSCI RCDD Certification
• Minimum 3+ years experience with Layer 1 installation and design
• Experience with MS Office, including Excel, PowerPoint and Visio
• Strong experience with Auto-CAD
• Solid understanding of installation & service in areas such as; network cabling (Fiber and Copper CAT 6/6A), LAN/WAN, servers, printers, phones and other devices related to Industrial infrastructure.
• Must be able to obtain a Position of Public Trust Clearance – US Citizen or Permanent Resident (Green Card Holder), and must not have traveled outside the US for a combined total of 6 months or more in last 5 years.
• Must have resided in the US for the last 5 years

Preferred Qualifications:
Local to the Raleigh, NC area (this position does not provide relocation assistance)
 
Job Number: 2010111480
Job Location: Raleigh, NC
Per Diem: split
Overtime: possible
Duration: 6 month
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Stephanie Spolzino
Address: 50 FOUNDERS PLAZA STE 304
City, State: EAST HARTFORD, CT 06108
Phone: 860/289-2643
800 Phone: 866/636-4723
Fax Phone: 800/556-5284
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Designer(Electrical Wire Design)

Description:
Serves as the subject matter expert for the development, maintenance and release of electrical/mechanical drawings, systems designs or engineering documentation and data by applying Company, industry and governmental standards for multiple customers. Proposes innovative solutions for emergent technical issues. Uses design tools to document and maintain configuration control of designs. Manages, creates, develops and maintains highly complex or specialized systems designs by preparing design layouts, modifying existing designs and integrating systems elements. Directs validation of complex engineering system design and functionality. Leads the process for product installation designs and part designs ranging from simple to complex. Coordinates activities and products with cross-functional groups, internal partners and external suppliers. Reviews and assigns work to others. Works under consultative direction

Skills: Catia-V5
 
Job Number: TD_OK
Job Location: Oklahoma City, OK
Rate: Open
Per Diem: Yes
Overtime: Yes
Duration: 6 Months
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: AMERICAN CYBERSYSTEMS
Attention: Rohan Mathur
Address: 1750 112TH AVE NE STE C228
City, State: BELLEVUE, WA 98004
Phone: 425/605-2321
Fax Phone: 425/558-0688
Website: www.acsicorp.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Technical Writer - no clearance SC

Description:
167949 Job Title: Technical Writer

Work Site Address: Greenville, SC 29605
Job Number: 3501-1
Max Pay Rate: $40.00/hr
Start Date: 4/6/2020
End Date: 12/18/2020
Position Type: Contract

Job Summary:
Writes, in clear and concise language, such technical documents as procedure manuals, service manuals, and related technical publications concerned with installation, operation, and maintenance of electronic, electrical, mechanical, and other equipment. Includes writing such technical documentation as operational specifications, bulletins, articles, and marketing publications.

Acquires or verifies knowledge of subject by interviewing workers engaged in developing new products and services or in making improvements, observing performance of experiments and methods of production, referring to blueprints, sketches, engineering drawings and notes, trade and engineering journals, rewrites of articles, bulletins, manuals, or similar publications.

Qualifications and Education Requirements
Required knowledge for creating Aircrew Checklist similar to existing USAF Aircrew type checklists.
Understanding of USAF type technical Manuals related to avionics upgraded systems.
Aviation Technical writing required

Skills: Category Name Required Importance Experience
Areas of Expertise C-130 Yes 1
Areas of Expertise Technical Writing Yes 1

Qty 2 positions
Need candidates with strong Technical Writing skills for USAF type Technical Manuals.
 
Job Number: JEG-3501-1
Job Location: Greenville, SC
Rate: 40/hr max
Duration: 8 months +
Input Date: 11/14/2020
Firm Name: MIDCOM CORPORATION
Attention: Jeana Edrozo
Address: 1275 N MANASSERO ST
City, State: ANAHEIM, CA 92807
Phone: 714/630-1999
800 Phone: 800/737-1632
Fax Phone: 714/459-7055
Website: www.midcom.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test Engineer-Avionics Development

Description:
A Test Engineer-Avionics Development job in Kent, WA is currently available through Belcan. In this role, you will develop specialized test systems in support of integrated Avionics testing at the box level for our suborbital launch vehicle programs for various spaceflight systems. You will also coordinate test system requirements with Avionics subsystem owners, integration and test engineers, and operations personnel. Major test system elements include environmental test racks, ground power and battery charging racks, wired and wireless communication ground stations, and ground network switchgear. To be considered for this role, you will have a B.S. degree in Electrical Engineering, Computer Engineering, or related field, plus a minimum of five years of related experience. Due to the nature of work performed at this facility, you must be a U.S. Citizen or Permanent Resident (Green Card holder).

Test Engineer-Avionics Development duties:

* Design, development, verification, and integration of specialized test hardware and software
* Work with internal stakeholders to define requirements, dependencies, and schedule needs associating with delivering test systems to programs
* Integrate test system hardware & software development schedules with program and vehicle schedules
* Support operational checkout of systems under test and provide training to test and operations personnel
* Work to continuously improve the avionics test team processes and standards

Qualifications:

* 5+ years of specialized test and electrical ground support equipment hardware and software design and development
* Excellent written, verbal, and interpersonal communication skills
* Passion for hands-on problem solving and avionics integration and test
* Ability to work independently and as part of a team on rapid development programs
* Ability to travel to and work at remote sites for extended periods supporting test integration, commissioning, and training

If you are interested in this Test Engineer-Avionics Development job in Kent, WA, please apply via the link provided.

Belcan is a global supplier of engineering, technical recruiting, and IT services to customers in the aerospace, industrial, and government sectors. Belcan engineers' better outcomes through adaptive and integrated services-from jet engines, airframe, and avionics to heavy vehicles, chemical processing, and cybersecurity. Belcan takes a partnering approach to provide customer-driven solutions that are flexible, scalable, and cost-effective. Our unique capabilities have led to continuous growth and success for 60 years. We are a team-driven Equal Opportunity Employer committed to workforce diversity.
 
Job Number: 297724
Job Location: Kent, WA
Rate: --
Per Diem: --
Overtime: --
Start Date: --
Input Date: 11/14/2020
Firm Name: BELCAN TECHSERVICES
Attention: DerrickHart
Address: 7820 REDSKY DR
City, State: CINCINNATI, OH 45249
Phone: 513/432-2995
800 Phone: 800/945-1900
Fax Phone: 513/489-0830
Website: www.belcan.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Test and Evaluation Senior Engineer

Description:
Test and Evaluation Senior Engineer

Job ID # 2020-11091

Contract Opportunity

Location: Sterling Heights, MI

Industry: Aerospace & Defense

Minimum Education: Bachelor’s Degree

Minimum Experience: 5 years



What You’ll Do:
•Develop test plans for system level and component level testing
•Develop test reports for system level and component level testing
•Create and maintain test schedules for system level and component level testing
•Provide high level estimates for labor hours and material dollars needed to execute a test program
•Develop instrumentation plans for system level and component level testing
•Execute field tests for system level testing and lab tests for component level testing
•Coordinate with lab operation personnel as required
•Coordinate with field engineering representatives as required
•Prepare weekly status reports for management and project team review
•Communicate program issues, needs, and updates with management and project team members

What You’ll Need:
•Good knowledge of various test equipment, test methods, and procedures - MIL-STD-810, ATPD-2404, ATPD-2167
•Personal computer skills: MS Office Suite, Creo, Teamcenter, Internal company databases and programs
•Occasional travel required to various test sites
•Great writing and communication skills
•Strong ability and willingness to work in a team environment



*U.S. Citizenship is required by law, regulation, executive order, or government contract.



Education & Experience:
•Bachelor’s degree in electrical or mechanical engineering combined with 5+ years of relevant work experience.



What to Expect:
•Applicants selected for employment will be required to pass a pre-employment drug screening and background investigation which may include education, criminal and work history verifications.
•Accepted applicants will have the opportunity to be eligible for benefits, including medical and supplemental insurance and a 401K. Appreciation and gratitude for employees is a hallmark of organizations with low turnover.





Moseley Technical Services, Inc. is an AA/EEO/Veterans/Disabled Employer.





Resources

For questions about benefits visit: http://www.moseleytechnical.com/job-seekers/

For more information about Moseley visit: http://www.moseleytechnical.com/about-us/
 
Job Number: 2020-11091
Job Location: Sterling Heights, MI
Input Date: 11/14/2020
Firm Name: MOSELEY TECHNICAL SERVICES INC
Address: 7500 S MEMORIAL PKWY STE 215-R
City, State: HUNTSVILLE, AL 35802
Phone: 256/880-0446
Fax Phone: 256/880-0936
Website: www.moseleytechnical.com

Vehicle Electrical Engineers

Description:
CAN bus experience
 
Job Location: MI/OH/IN/TN
Input Date: 11/23/2020
Firm Name: ADVANCED TECHNOLOGY
Address: 15 KENNETH MINER DR
City, State: WRENTHAM, MA 02093
800 Phone: 877/334-7700
Fax Phone: 877/335-7700
Email: jmac@advancedtechno.com
Website: www.advancedtechno.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engineers - Many needed***

Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction. Mentor Graphics Capitol Logic and Harness XC experience desired.

Email resume to: mmccarthy@pdstech.com
 
Job Number: Bo-Wire-OK
Job Location: Oklahoma City, OK
Rate: $67.00/hour
Per Diem: Possible
Overtime: Possible
Duration: Long term
Start Date: ASAP
Input Date: 11/14/2020
Firm Name: PDS TECHNICAL SERVICES
Attention: Mary Ann McCarthy
Address: 1215 FERN RIDGE PKWY STE 231
City, State: ST LOUIS, MO 63141
Phone: 314/628-9143
800 Phone: 800/472-3737
Fax Phone: 314/628-9485
Website: www.pdstech.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 4

Description:
Wire Design & Install Engr 4

Location: Mesa, AZ
Duration: 6 months

Job Description:
Develops and maintains cable/wire harness detail and assembly designs. Analyzes results and performs design reviews. Leads the team to analyze results and performs design reviews. Provides engineering design disposition on discrepancies (e.g., rejection tags, production action requests, shop revision requests). Documents processes, specifications and procedures that support the design and manufacture of electrical commodities. Develops complex statements of work, metrics, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Works under minimal direction.

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+4 years' related work experience, Master+7 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 652-Wiring Design
 
Job Number: 20-03383
Job Location: Mesa, AZ
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 3/27/2020
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

THIS JOB IS NO LONGER AVAILABLE. THIS IS ARCHIVAL INFORMATION.
Wire Design & Install Engr 5

Description:
Wire Design & Install Engr 5

Location: Mesa, AZ
Duration: 6 Months

Description:
Provides guidance in the development of cable/wire harness detail and assembly designs. Provides guidance in the development of electrical product detail, assembly and installation designs. Provides direction used by multiple teams to analyze complex results and performs design reviews. Provides guidance in engineering design disposition on discrepancies. Defines processes, specifications and procedures that support the design and manufacture of electrical commodities. Provides direction used by multiple teams to develop complex statements of work, metrics, schedules and budgets. Directs the technical review of supplier capabilities to facilitate source selection. Directs the development of functional and physical design requirements to ensure complete integrated design architecture. Works under consultative direction.

Wire Design tool is Capital - required
CAD tool is NX Like to have

Education / Experience:
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 14 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+9 years' related work experience, Master+12 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Skill Code: 652-Wiring Design
 
Job Number: 20-03394
Job Location: Mesa, AZ
Per Diem: split
Overtime: possible
Duration: 6 months
Start Date: 3/27/2020
Input Date: 11/14/2020
Firm Name: ICONMA LLC
Attention: Constance Whitcomb
Address: 4620 E 53RD ST
City, State: DAVENPORT, IA 52807
Phone: 312/502-4795
Website: www.iconma.com

Back to Advanced Job Search